summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r--arch/arm/mach-imx/clk-busy.c2
-rw-r--r--arch/arm/mach-imx/clk-imx35.c3
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c5
-rw-r--r--arch/arm/mach-imx/common.h2
-rw-r--r--arch/arm/mach-imx/headsmp.S18
-rw-r--r--arch/arm/mach-imx/hotplug.c12
-rw-r--r--arch/arm/mach-imx/imx25-dt.c5
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c15
-rw-r--r--arch/arm/mach-imx/src.c12
9 files changed, 46 insertions, 28 deletions
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
index 1ab91b5209e6..85b728cc27ab 100644
--- a/arch/arm/mach-imx/clk-busy.c
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
busy->mux.reg = reg;
busy->mux.shift = shift;
- busy->mux.width = width;
+ busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 74e3a34d78b8..2193c834f55c 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+ clk_register_clkdev(clk[admux_gate], "audmux", NULL);
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
@@ -264,6 +265,8 @@ int __init mx35_clocks_init(void)
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
+ clk_prepare_enable(clk[iomuxc_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7b025ee528a5..d38e54f5b6d7 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
@@ -172,7 +172,7 @@ static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom,
+ mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {
@@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- clk_register_clkdev(clk[twd], NULL, "smp_twd");
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 5a800bfcec5b..5bf4a97ab241 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 921fc1555854..a58c8b0527cc 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup)
#ifdef CONFIG_PM
/*
- * The following code is located into the .data section. This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
*/
- .data
- .align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
- ldr r2, phys_l2x0_saved_regs
+ adr r0, l2x0_saved_regs_offset
+ ldr r2, [r0]
+ add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
@@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup)
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
+l2x0_saved_regs_offset:
+ .word l2x0_saved_regs - .
+
#else
.macro pl310_resume
.endm
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 7bc5fe15dda2..361a253e2b63 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
+ /*
+ * We use the cpu jumping argument register to sync with
+ * imx_cpu_kill() which is running on cpu0 and waiting for
+ * the register being cleared to kill the cpu.
+ */
+ imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (imx_get_cpu_arg(cpu) == 0)
+ if (time_after(jiffies, timeout))
+ return 0;
imx_enable_cpu(cpu, false);
+ imx_set_cpu_arg(cpu, 0);
return 1;
}
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 03b65e5ea541..82348391582a 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index ee42d20cba19..5faba7a3c95f 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -22,8 +22,6 @@
#include "common.h"
#include "hardware.h"
-extern unsigned long phys_l2x0_saved_regs;
-
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
@@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
void __init imx6q_pm_init(void)
{
- /*
- * The l2x0 core code provides an infrastucture to save and restore
- * l2x0 registers across suspend/resume cycle. But because imx6q
- * retains L2 content during suspend and needs to resume L2 before
- * MMU is enabled, it can only utilize register saving support and
- * have to take care of restoring on its own. So we save physical
- * address of the data structure used by l2x0 core to save registers,
- * and later restore the necessary ones in imx6q resume entry.
- */
-#ifdef CONFIG_CACHE_L2X0
- phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index e15f1555c59b..09a742f8c7ab 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
src_base + SRC_GPR1 + cpu * 8);
}
+u32 imx_get_cpu_arg(int cpu)
+{
+ cpu = cpu_logical_map(cpu);
+ return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+ cpu = cpu_logical_map(cpu);
+ writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
void imx_src_prepare_restart(void)
{
u32 val;