diff options
Diffstat (limited to 'arch/blackfin/mach-bf533')
21 files changed, 4003 insertions, 447 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 4103a97c1a70..c66a68f30239 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> @@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00060000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0x100000, .offset = 0x60000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x6a0000, .offset = 0x00160000, } diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 840059241fbe..308c98dc5aba 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -14,6 +14,12 @@ config BFIN533_STAMP help BF533-STAMP board support. +config BLACKSTAMP + bool "BlackStamp" + help + Support for the BlackStamp board. Hardware info available at + http://blackfin.uclinux.org/gf/project/blackstamp/ + config BFIN533_BLUETECHNIX_CM bool "Bluetechnix CM-BF533" depends on (BF533) diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index b7a1a1d79bda..9afbe72b484f 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o +obj-$(CONFIG_BLACKSTAMP) += blackstamp.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c new file mode 100644 index 000000000000..d064ded87719 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -0,0 +1,401 @@ +/* + * File: arch/blackfin/mach-bf533/blackstamp.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Benjamin Matthews <bmat@lle.rochester.edu> + * Aidan Williams <aidan@nicta.com.au> + * + * Created: 2008 + * Description: Board Info File for the BlackStamp + * + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * More info about the BlackStamp at: + * http://blackfin.uclinux.org/gf/project/blackstamp/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "BlackStamp"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF3, + .end = IRQ_PF3, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. */ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"}, +}; /* Mapped to the first three PF Test Points */ + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 8, + .scl_pin = 9, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; /* This hasn't actually been used these pins + * are (currently) free pins on the expansion connector */ + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 600000000), + VRPAIR(VLEV_125, 600000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + + &bfin_gpios_device, +}; + +static int __init blackstamp_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + if (ret < 0) + return ret; + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + bfin_write_FIO_FLAG_S(PF0); + SSYNC(); +#endif + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(blackstamp_init); diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index ed2b0b8f5dc9..575843f6d9ef 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -36,7 +36,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 38 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x2030C000, - .end = 0x2030C01F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2030D018, - .end = 0x2030D01B, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_085, 250000000), @@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init cm_bf533_init(void) @@ -416,10 +374,6 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 079389cbd859..cc2e7eeb1d5a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -37,7 +37,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,16 +89,16 @@ static struct platform_device smc91x_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -424,10 +382,6 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 13ae49515f73..050ffca53530 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/i2c.h> #include <asm/dma.h> @@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -625,10 +583,6 @@ static int __init stamp_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index c671e8549b17..01b2b7ead5ab 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,294 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - p0.h = hi(FIO_MASKA_C); - p0.l = lo(FIO_MASKA_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - p0.h = hi(FIO_MASKB_C); - p0.l = lo(FIO_MASKB_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -412,13 +129,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h new file mode 100644 index 000000000000..8f7ea112fd3a --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -0,0 +1,272 @@ +/* + * File: include/asm-blackfin/mach-bf533/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if __SILICON_REVISION__ < 3 +# error will not work on BF533 silicon version 0.0, 0.1, or 0.2 +#endif + +#if defined(__ADSPBF531__) +# define ANOMALY_BF531 1 +#else +# define ANOMALY_BF531 0 +#endif +#if defined(__ADSPBF532__) +# define ANOMALY_BF532 1 +#else +# define ANOMALY_BF532 0 +#endif +#if defined(__ADSPBF533__) +# define ANOMALY_BF533 1 +#else +# define ANOMALY_BF533 0 +#endif + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ +#define ANOMALY_05000105 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ +#define ANOMALY_05000158 (__SILICON_REVISION__ < 5) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000183 (__SILICON_REVISION__ < 4) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 4) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 4) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 4) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ +#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Specific Sequence That Can Cause DMA Error or DMA Stopping */ +#define ANOMALY_05000203 (__SILICON_REVISION__ < 4) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 4) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 4) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (1) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* SPI Slave Boot Mode Modifies Registers from Reset Value */ +#define ANOMALY_05000229 (1) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ +#define ANOMALY_05000233 (__SILICON_REVISION__ < 4) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000234 (__SILICON_REVISION__ == 4) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 4) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Data CPLBs Should Prevent Spurious Hardware Errors */ +#define ANOMALY_05000246 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ == 4) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 4) +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 5) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 5) +/* Spontaneous Reset of Internal Voltage Regulator */ +#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM Memory May Be Lost */ +#define ANOMALY_05000273 (1) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (1) +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ +#define ANOMALY_05000277 (1) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (1) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (1) +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ +#define ANOMALY_05000282 (1) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (__SILICON_REVISION__ < 5) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +#define ANOMALY_05000306 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ +#define ANOMALY_05000311 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ +#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + + +/* These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Watchpoints (Hardware Breakpoints) are not supported */ +#define ANOMALY_05000067 (__SILICON_REVISION__ < 3) +/* Reserved bits in SYSCFG register not set at power on */ +#define ANOMALY_05000109 (__SILICON_REVISION__ < 3) +/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +#define ANOMALY_05000123 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000124 (__SILICON_REVISION__ < 3) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* SPI clock polarity and phase bits incorrect during booting */ +#define ANOMALY_05000126 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL is not set on Reset */ +#define ANOMALY_05000137 (__SILICON_REVISION__ < 3) +/* SPI boot will not complete if there is a zero fill block in the loader file */ +#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000143 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* The source MDMA descriptor may stop with a DMA Error */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +#define ANOMALY_05000148 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ +#define ANOMALY_05000155 (__SILICON_REVISION__ < 3) +/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 3) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 3) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 3) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 3) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 3) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* In PPI Transmit Modes with External Frame Syncs POLC */ +#define ANOMALY_05000192 (__SILICON_REVISION__ < 3) +/* Internal Voltage Regulator may not start up */ +#define ANOMALY_05000206 (__SILICON_REVISION__ < 3) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000266 (0) +#define ANOMALY_05000323 (0) + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h new file mode 100644 index 000000000000..12a416931991 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bf533.h @@ -0,0 +1,161 @@ +/* + * File: include/asm-blackfin/mach-bf533/bf533.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF533_H__ +#define __MACH_BF533_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_BIT 0x0FFFFFFF +#define UART_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0xFF0FFFFF +#define SPI_ERROR_BIT 0xFFF0FFFF +#define SPORT0_ERROR_BIT 0xFFFF0FFF +#define PPI_ERROR_BIT 0xFFFFF0FF +#define DMA_ERROR_BIT 0xFFFFFF0F +#define PLLWAKE_ERROR_BIT 0xFFFFFFFF + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_BIT 0x0FFFFFFF +#define DMA6_UARTRX_BIT 0xF0FFFFFF +#define DMA5_SPI_BIT 0xFF0FFFFF +#define DMA4_SPORT1TX_BIT 0xFFF0FFFF +#define DMA3_SPORT1RX_BIT 0xFFFF0FFF +#define DMA2_SPORT0TX_BIT 0xFFFFF0FF +#define DMA1_SPORT0RX_BIT 0xFFFFFF0F +#define DMA0_PPI_BIT 0xFFFFFFFF + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_BIT 0x0FFFFFFF +#define MEMDMA1_BIT 0xF0FFFFFF +#define MEMDMA0_BIT 0xFF0FFFFF +#define PFB_BIT 0xFFF0FFFF +#define PFA_BIT 0xFFFF0FFF +#define TIMER2_BIT 0xFFFFF0FF +#define TIMER1_BIT 0xFFFFFF0F +#define TIMER0_BIT 0xFFFFFFFF + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF533 +#define CPU "BF533" +#define CPUID 0x027a5000 +#endif +#ifdef CONFIG_BF532 +#define CPU "BF532" +#define CPUID 0x0275A000 +#endif +#ifdef CONFIG_BF531 +#define CPU "BF531" +#define CPUID 0x027a5000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF533_H__ */ diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h new file mode 100644 index 000000000000..ebf592b59aab --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -0,0 +1,164 @@ +/* + * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#ifdef CONFIG_BFIN_UART0_CTSRTS +# define CONFIG_SERIAL_BFIN_CTSRTS +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif +#endif + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { + { + 0xFFC00400, + IRQ_UART_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART_TX, + CH_UART_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + } +}; + +#define DRIVER_NAME "bfin-uart" + +int nr_ports = BFIN_UART_NR_PORTS; +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_input(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h new file mode 100644 index 000000000000..9bb87e9e2e9b --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h @@ -0,0 +1,125 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h new file mode 100644 index 000000000000..d80971b4e3aa --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -0,0 +1,60 @@ +/* + * File: include/asm-blackfin/mach-bf533/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF533_FAMILY + +#include "bf533.h" +#include "mem_map.h" +#include "defBF532.h" +#include "anomaly.h" + +#if !defined(__ASSEMBLY__) +#include "cdefBF532.h" +#endif + +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#endif /* _MACH_BLACKFIN_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h new file mode 100644 index 000000000000..3d8978a52c17 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -0,0 +1,767 @@ +/* + * File: include/asm-blackfin/mach-bf533/cdefBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF532_H +#define _CDEF_BF532_H + +#include <asm/blackfin.h> + +/*include all Core registers and bit definitions*/ +#include "defBF532.h" + +/*include core specific register pointer definitions*/ +#include <asm/cdef_LPBlackfin.h> + +#include <asm/system.h> + +/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} + +/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) + +/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) + +/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) + +/* DMA Traffic controls */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + +/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ +#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) +#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) +#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C) +#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val) +#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S) +#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val) +#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C) +#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val) +#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S) +#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val) +#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR) +#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val) +#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE) +#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val) +#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH) +#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val) +#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN) +#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val) +#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D) +#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val) +#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T) +#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val) +#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D) +#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val) +#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) +#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) + + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\ +{\ + unsigned long flags;\ + local_irq_save(flags);\ + bfin_write16(FIO_FLAG_ ## name,val);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\ +{\ + unsigned long flags;\ + unsigned short ret;\ + local_irq_save(flags);\ + ret = bfin_read16(FIO_FLAG_ ## name);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ + return ret;\ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) + +/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) + +/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) + +/* UART Controller */ +#define bfin_read_UART_THR() bfin_read16(UART_THR) +#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) +#define bfin_read_UART_RBR() bfin_read16(UART_RBR) +#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) +#define bfin_read_UART_DLL() bfin_read16(UART_DLL) +#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) +#define bfin_read_UART_IER() bfin_read16(UART_IER) +#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) +#define bfin_read_UART_DLH() bfin_read16(UART_DLH) +#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) +#define bfin_read_UART_IIR() bfin_read16(UART_IIR) +#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) +#define bfin_read_UART_LCR() bfin_read16(UART_LCR) +#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) +#define bfin_read_UART_MCR() bfin_read16(UART_MCR) +#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) +#define bfin_read_UART_LSR() bfin_read16(UART_LSR) +#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) +/* +#define UART_MSR +*/ +#define bfin_read_UART_SCR() bfin_read16(UART_SCR) +#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) +#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) +#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) + +/* SPI Controller */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* TIMER 0, 1, 2 Registers */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) +#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val) + +/* SPORT0 Controller */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) + +/* SPORT1 Controller */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) + +/* Parallel Peripheral Interface (PPI) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) +#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS() +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) + +#endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h new file mode 100644 index 000000000000..7f4633223e6d --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -0,0 +1,1266 @@ +/************************************************************************ + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + ************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_BF532_H +#define _DEF_BF532_H + +/* include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ + +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#if 0 +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#endif +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ + +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ + +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ + +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic controls */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ + +#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ + +#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ + +#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ + +#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ + +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/*********************************************************************************** */ +/* System MMR Register Bits */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x0008 /* Core clock off */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ +#if !defined(__ADSPBF538__) +/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Mask */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + + /* SIC_IAR0 Masks */ + +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Masks */ + +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Masks */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* ***************************** UART CONTROLLER MASKS ********************** */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* ********** SERIAL PORT MASKS ********************** */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ + defined(__ADSPBF533__) +# define SLEN 0x001F /*TX Word Length */ +#else +# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#endif +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* no companding */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ +#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ +/* SPORTx_MCMC1 Macros */ +#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* ********** DMA CONTROLLER MASKS *********************8 */ + +/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define DMAFLOW 0x00007000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ +#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ +#define PMAP_SPI 0x5000 /* PMAP SPI DMA */ +#define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ +#define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 +#define TIMIL1 0x0002 +#define TIMIL2 0x0004 +#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ +#define TRUN0 0x1000 +#define TRUN1 0x2000 +#define TRUN2 0x4000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* SPIx_FLG Masks */ +#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ + +/* AMGCTL Masks */ +#define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x00000000 /* All Banks Disabled */ +#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ + +/* SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + + +#endif /* _DEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h new file mode 100644 index 000000000000..bd9d5e94307d --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/dma.h @@ -0,0 +1,54 @@ +/***************************************************************************** +* +* BF-533/2/1 Specific Declarations +* +****************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/dma.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 12 + +#define CH_PPI 0 +#define CH_SPORT0_RX 1 +#define CH_SPORT0_TX 2 +#define CH_SPORT1_RX 3 +#define CH_SPORT1_TX 4 +#define CH_SPI 5 +#define CH_UART_RX 6 +#define CH_UART_TX 7 +#define CH_MEM_STREAM0_DEST 8 /* TX */ +#define CH_MEM_STREAM0_SRC 9 /* RX */ +#define CH_MEM_STREAM1_DEST 10 /* TX */ +#define CH_MEM_STREAM1_SRC 11 /* RX */ + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h new file mode 100644 index 000000000000..5aa38e5da6b7 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -0,0 +1,173 @@ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BF533_IRQ_H_ +#define _BF533_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + PLL Wakeup Interrupt IVG7 7 + DMA Error (generic) IVG7 8 + PPI Error Interrupt IVG7 9 + SPORT0 Error Interrupt IVG7 10 + SPORT1 Error Interrupt IVG7 11 + SPI Error Interrupt IVG7 12 + UART Error Interrupt IVG7 13 + RTC Interrupt IVG8 14 + DMA0 Interrupt (PPI) IVG8 15 + DMA1 (SPORT0 RX) IVG9 16 + DMA2 (SPORT0 TX) IVG9 17 + DMA3 (SPORT1 RX) IVG9 18 + DMA4 (SPORT1 TX) IVG9 19 + DMA5 (PPI) IVG10 20 + DMA6 (UART RX) IVG10 21 + DMA7 (UART TX) IVG10 22 + Timer0 IVG11 23 + Timer1 IVG11 24 + Timer2 IVG11 25 + PF Interrupt A IVG12 26 + PF Interrupt B IVG12 27 + DMA8/9 Interrupt IVG13 28 + DMA10/11 Interrupt IVG13 29 + Watchdog Timer IVG13 30 + + Softirq IVG14 31 + System Call -- + (lowest priority) IVG15 32 * + */ +#define SYS_IRQS 31 +#define NR_PERI_INTS 24 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /*Emulation */ +#define IRQ_RST 1 /*reset */ +#define IRQ_NMI 2 /*Non Maskable */ +#define IRQ_EVX 3 /*Exception */ +#define IRQ_UNUSED 4 /*- unused interrupt*/ +#define IRQ_HWERR 5 /*Hardware Error */ +#define IRQ_CORETMR 6 /*Core timer */ + +#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ +#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ +#define IRQ_UART_ERROR 13 /*UART Error Interrupt */ +#define IRQ_RTC 14 /*RTC Interrupt */ +#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ +#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ +#define IRQ_TMR0 23 /*Timer 0 */ +#define IRQ_TMR1 24 /*Timer 1 */ +#define IRQ_TMR2 25 /*Timer 2 */ +#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ +#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH 30 /*Watch Dog Timer */ + +#define IRQ_PF0 33 +#define IRQ_PF1 34 +#define IRQ_PF2 35 +#define IRQ_PF3 36 +#define IRQ_PF4 37 +#define IRQ_PF5 38 +#define IRQ_PF6 39 +#define IRQ_PF7 40 +#define IRQ_PF8 41 +#define IRQ_PF9 42 +#define IRQ_PF10 43 +#define IRQ_PF11 44 +#define IRQ_PF12 45 +#define IRQ_PF13 46 +#define IRQ_PF14 47 +#define IRQ_PF15 48 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PF15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_POS 28 +#define UART_ERROR_POS 24 +#define SPORT1_ERROR_POS 20 +#define SPI_ERROR_POS 16 +#define SPORT0_ERROR_POS 12 +#define PPI_ERROR_POS 8 +#define DMA_ERROR_POS 4 +#define PLLWAKE_ERROR_POS 0 + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_POS 28 +#define DMA6_UARTRX_POS 24 +#define DMA5_SPI_POS 20 +#define DMA4_SPORT1TX_POS 16 +#define DMA3_SPORT1RX_POS 12 +#define DMA2_SPORT0TX_POS 8 +#define DMA1_SPORT0RX_POS 4 +#define DMA0_PPI_POS 0 + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_POS 28 +#define MEMDMA1_POS 24 +#define MEMDMA0_POS 20 +#define PFB_POS 16 +#define PFA_POS 12 +#define TIMER2_POS 8 +#define TIMER1_POS 4 +#define TIMER0_POS 0 + +#endif /* _BF533_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h new file mode 100644 index 000000000000..ed2034bf10ec --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/mem_init.h @@ -0,0 +1,297 @@ +/* + * File: include/asm-blackfin/mach-bf533/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h new file mode 100644 index 000000000000..581fc6eea789 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h @@ -0,0 +1,171 @@ +/* + * File: include/asm-blackfin/mach-bf533/mem_map.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MEM_MAP_533_H_ +#define _MEM_MAP_533_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x400 + +/* Level 1 Memory */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF533 processors */ + +#ifdef CONFIG_BF533 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#ifdef CONFIG_BFIN_ICACHE +#define L1_CODE_LENGTH (0x14000 - 0x4000) +#else +#define L1_CODE_LENGTH 0x14000 +#endif + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF532 processors */ + +#ifdef CONFIG_BF532 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 + +#ifdef CONFIG_BFIN_ICACHE +#define L1_CODE_LENGTH (0xC000 - 0x4000) +#else +#define L1_CODE_LENGTH 0xC000 +#endif + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH (0x4000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF531 processors */ + +#ifdef CONFIG_BF531 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 +#define L1_CODE_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x0000 + + +#ifdef CONFIG_BFIN_DCACHE +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif + +#endif + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h new file mode 100644 index 000000000000..685a2651dcda --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -0,0 +1,67 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11)) +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12)) + +#define P_SPORT1_TSCLK (P_DONTCARE) +#define P_SPORT1_RSCLK (P_DONTCARE) +#define P_SPORT0_TSCLK (P_DONTCARE) +#define P_SPORT0_RSCLK (P_DONTCARE) +#define P_UART0_RX (P_DONTCARE) +#define P_UART0_TX (P_DONTCARE) +#define P_SPORT1_DRSEC (P_DONTCARE) +#define P_SPORT1_RFS (P_DONTCARE) +#define P_SPORT1_DTPRI (P_DONTCARE) +#define P_SPORT1_DTSEC (P_DONTCARE) +#define P_SPORT1_TFS (P_DONTCARE) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DONTCARE) +#define P_SPORT0_RFS (P_DONTCARE) +#define P_SPORT0_DTPRI (P_DONTCARE) +#define P_SPORT0_DTSEC (P_DONTCARE) +#define P_SPORT0_TFS (P_DONTCARE) +#define P_SPORT0_DRPRI (P_DONTCARE) + +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) + +#define P_TMR2 (P_DONTCARE) +#define P_TMR1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) + + + + + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index 7d79e0f9503d..f51994b7a2b9 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) | |