diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/boot/dts/ac14xx.dts | 392 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/mpc5121.dtsi | 2 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/mpc5121ads.dts | 2 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/mpc5125twr.dts | 233 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/pdm360ng.dts | 2 | ||||
-rw-r--r-- | arch/powerpc/configs/mpc512x_defconfig | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/Kconfig | 8 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/clock.c | 9 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/mpc512x.h | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/mpc512x_generic.c (renamed from arch/powerpc/platforms/512x/mpc5121_generic.c) | 12 | ||||
-rw-r--r-- | arch/powerpc/platforms/512x/mpc512x_shared.c | 33 |
12 files changed, 674 insertions, 24 deletions
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts new file mode 100644 index 000000000000..a27a4609bb42 --- /dev/null +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -0,0 +1,392 @@ +/* + * Device Tree Source for the MPC5121e based ac14xx board + * + * Copyright 2012 Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/include/ "mpc5121.dtsi" + +/ { + model = "ac14xx"; + compatible = "ifm,ac14xx", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial7; + spi4 = &spi4; + spi5 = &spi5; + }; + + cpus { + PowerPC,5121@0 { + timebase-frequency = <40000000>; /* 40 MHz (csb/4) */ + bus-frequency = <160000000>; /* 160 MHz csb bus */ + clock-frequency = <400000000>; /* 400 MHz ppc core */ + }; + }; + + memory { + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + nfc@40000000 { + status = "disabled"; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */ + 0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */ + 0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */ + 0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */ + 0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */ + 0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + label = "dtb-kernel-production"; + reg = <0x00000000 0x00400000>; + }; + partition@1 { + label = "filesystem-production"; + reg = <0x00400000 0x03400000>; + }; + + partition@2 { + label = "recovery"; + reg = <0x03800000 0x00700000>; + }; + + partition@3 { + label = "uboot-code"; + reg = <0x03f00000 0x00040000>; + }; + partition@4 { + label = "uboot-env1"; + reg = <0x03f40000 0x00020000>; + }; + partition@5 { + label = "uboot-env2"; + reg = <0x03f60000 0x00020000>; + }; + }; + + fram@1,0 { + compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq"; + reg = <1 0x00000000 0x00010000>; + }; + + asi@2,0 { + /* masters mapping: CS, CS offset, size */ + reg = <2 0x00000000 0x00080000 + 6 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "ifm,ac14xx-asi-fpga"; + gpios = < + &gpio_pic 26 0 /* prog */ + &gpio_pic 27 0 /* done */ + &gpio_pic 10 0 /* reset */ + >; + + master@1 { + interrupts = <20 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <2 0x00009000 0x00009100>; + label = "AS-i master 1"; + }; + + master@2 { + interrupts = <21 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <6 0x00009000 0x00009100>; + label = "AS-i master 2"; + }; + }; + + netx@3,0 { + compatible = "ifm,netx"; + reg = <0x3 0x00000000 0x00020000>; + chipselect = <3 0x00101140 0x00203100>; + interrupts = <17 0x8>; + gpios = <&gpio_pic 15 0>; + }; + + safety@5,0 { + compatible = "ifm,safety"; + reg = <0x5 0x00000000 0x00010000>; + chipselect = <5 0x00009000 0x00009100>; + interrupts = <22 0x2>; + interrupt-parent = <&gpio_pic>; + gpios = < + &gpio_pic 12 0 /* prog */ + &gpio_pic 11 0 /* done */ + >; + }; + }; + + soc@80000000 { + + clock@f00 { + compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; + }; + + /* + * GPIO PIC: + * interrupts cell = <pin nr, sense> + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + gpio_pic: gpio@1100 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdhc@1500 { + cd-gpios = <&gpio_pic 23 0>; /* card detect */ + wp-gpios = <&gpio_pic 24 0>; /* write protect */ + wp-inverted; /* WP active high */ + }; + + i2c@1700 { + /* use Fast-mode */ + clock-frequency = <400000>; + + at24@30 { + compatible = "at24,24c01"; + reg = <0x30>; + }; + + at24@31 { + compatible = "at24,24c01"; + reg = <0x31>; + }; + + temp@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c01"; + reg = <0x50>; + }; + + at24@51 { + compatible = "at24,24c01"; + reg = <0x51>; + }; + + at24@52 { + compatible = "at24,24c01"; + reg = <0x52>; + }; + + at24@53 { + compatible = "at24,24c01"; + reg = <0x53>; + }; + + at24@54 { + compatible = "at24,24c01"; + reg = <0x54>; + }; + + at24@55 { + compatible = "at24,24c01"; + reg = <0x55>; + }; + + at24@56 { + compatible = "at24,24c01"; + reg = <0x56>; + }; + + at24@57 { + compatible = "at24,24c01"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + axe_pic: axe-base@2000 { + compatible = "fsl,mpc5121-axe-base"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + axe-app { + compatible = "fsl,mpc5121-axe-app"; + interrupt-parent = <&axe_pic>; + interrupts = < + /* soft interrupts */ + 0 0x0 1 0x0 2 0x0 3 0x0 + 4 0x0 5 0x0 6 0x0 7 0x0 + /* fifo interrupts */ + 8 0x0 9 0x0 10 0x0 11 0x0 + >; + }; + + display@2100 { + edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00 + 0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27 + 1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01 + 01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04 + 21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F + 3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45 + 54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10 + 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5]; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + enet: ethernet@2800 { + phy-handle = <&phy0>; + }; + + usb@3000 { + status = "disabled"; + }; + + usb@4000 { + status = "disabled"; + }; + + /* PSC3 serial port A, aka ttyPSC0 */ + serial0: psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + /* PSC4 in SPI mode */ + spi4: psc@11400 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <768>; + fsl,tx-fifo-size = <768>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio_pic 25 0>; + + flash: m25p128@0 { + compatible = "st,m25p128"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi-flash0"; + reg = <0x00000000 0x01000000>; + }; + }; + }; + + /* PSC5 in SPI mode */ + spi5: psc@11500 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,mode = "spi-master"; + fsl,rx-fifo-size = <128>; + fsl,tx-fifo-size = <128>; + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "ilitek,ili922x"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + }; + }; + + /* PSC7 serial port C, aka ttyPSC2 */ + serial7: psc@11700 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <1>; + gpio-activelow; + col-gpios-binary; + col-switch-delay-ms = <200>; + + col-gpios = <&gpio_pic 1 0>; /* pin1 */ + + row-gpios = <&gpio_pic 2 0 /* pin2 */ + &gpio_pic 3 0 /* pin3 */ + &gpio_pic 4 0>; /* pin4 */ + + linux,keymap = <0x0000006e /* FN LEFT */ + 0x01000067 /* UP */ + 0x02000066 /* FN RIGHT */ + 0x00010069 /* LEFT */ + 0x0101006a /* DOWN */ + 0x0201006c>; /* RIGHT */ + }; + }; + + leds { + compatible = "gpio-leds"; + + backlight { + label = "backlight"; + gpios = <&gpio_pic 0 0>; + default-state = "keep"; + }; + green { + label = "green"; + gpios = <&gpio_pic 18 0>; + default-state = "keep"; + }; + red { + label = "red"; + gpios = <&gpio_pic 19 0>; + default-state = "keep"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 723e292b6b4e..2e82d0e71dd3 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -384,7 +384,7 @@ interrupts = <40 0x8>; }; - dma@14000 { + dma0: dma@14000 { compatible = "fsl,mpc5121-dma"; reg = <0x14000 0x1800>; interrupts = <65 0x8>; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index f269b1382ef7..7d3cb79185cb 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -13,7 +13,7 @@ / { model = "mpc5121ads"; - compatible = "fsl,mpc5121ads"; + compatible = "fsl,mpc5121ads", "fsl,mpc5121"; nfc@40000000 { /* diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts new file mode 100644 index 000000000000..4177b62240c2 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -0,0 +1,233 @@ +/* + * STx/Freescale ADS5125 MPC5125 silicon + * + * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved. + * + * Reworked by Matteo Facchinetti (engineering@sirius-es.it) + * Copyright (C) 2013 Sirius Electronic Systems + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "mpc5125twr"; // In BSP "mpc5125ads" + compatible = "fsl,mpc5125ads", "fsl,mpc5125"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5125@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x08000>; // 32K at 0x30000000 + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = <intr #, sense> + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5125-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ // Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + }; + + gpio1: gpio@1180 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1180 0x080>; + interrupts = <86 0x8>; + }; + + can@1300 { // CAN rev.2 + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + interrupts = <8 0x8>; + reg = <0x1500 0x100>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <0xa 0x8>; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + diu@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5125-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy0 >; + phy-connection-type = "rmii"; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5125-ioctl"; + reg = <0xA000 0x1000>; + }; + + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // 5125 PSCs are not 52xx or 5121 PSC compatible + // PSC1 uart0 aka ttyPSC0 + serial@11100 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + // PSC9 uart1 aka ttyPSC1 + serial@11900 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts index 0b069477838a..74337403faee 100644 --- a/arch/powerpc/boot/dts/pdm360ng.dts +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -17,7 +17,7 @@ / { model = "pdm360ng"; - compatible = "ifm,pdm360ng"; + compatible = "ifm,pdm360ng", "fsl,mpc5121"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig index 211fcc9ed700..0d0d981442fd 100644 --- a/arch/powerpc/configs/mpc512x_defconfig +++ b/arch/powerpc/configs/mpc512x_defconfig @@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_PPC_CHRP is not set CONFIG_PPC_MPC512x=y CONFIG_MPC5121_ADS=y -CONFIG_MPC5121_GENERIC=y +CONFIG_MPC512x_GENERIC=y CONFIG_PDM360NG=y # CONFIG_PPC_PMAC is not set CONFIG_NO_HZ=y diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index c16999802ecf..eb4620355e7b 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -15,16 +15,16 @@ config MPC5121_ADS help This option enables support for the MPC5121E ADS board. -config MPC5121_GENERIC - bool "Generic support for simple MPC5121 based boards" +config MPC512x_GENERIC + bool "Generic support for simple MPC512x based boards" depends on PPC_MPC512x select DEFAULT_UIMAGE help - This option enables support for simple MPC5121 based boards + This option enables support for simple MPC512x based boards which do not need custom platform specific setup. Compatible boards include: Protonic LVT base boards (ZANMCU - and VICVT2). + and VICVT2), Freescale MPC5125 Tower system. config PDM360NG bool "ifm PDM360NG board" diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 4efc1c4b6fb5..72fb9340e09f 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -3,5 +3,5 @@ # obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o -obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 52d57d281724..e504166e089a 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -29,6 +29,8 @@ #include <asm/mpc5121.h> #include <asm/clk_interface.h> +#include "mpc512x.h" + #undef CLK_DEBUG static int clocks_initialized; @@ -683,8 +685,13 @@ static void psc_clks_init(void) struct device_node *np; struct platform_device *ofdev; u32 reg; + const char *psc_compat; + + psc_compat = mpc512x_select_psc_compat(); + if (!psc_compat) + return; - for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { + for_each_compatible_node(np, NULL, psc_compat) { if (!of_property_read_u32(np, "reg", ®)) { int pscnum = (reg & 0xf00) >> 8; struct clk *clk = psc_dev_clk(pscnum); diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index c32b399eb952..0a8e60023944 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -15,6 +15,7 @@ extern void __init mpc512x_init_IRQ(void); extern void __init mpc512x_init(void); extern int __init mpc5121_clk_init(void); void __init mpc512x_declare_of_platform_devices(void); +extern const char *mpc512x_select_psc_compat(void); extern void mpc512x_restart(char *cmd); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc512x_generic.c index ca1ca6669990..5fb919b30924 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc512x_generic.c @@ -4,7 +4,7 @@ * Author: John Rigby, <jrigby@freescale.com> * * Description: - * MPC5121 SoC setup + * MPC512x SoC setup * * This is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by @@ -28,20 +28,22 @@ */ static const char * const board[] __initconst = { "prt,prtlvt", + "fsl,mpc5125ads", + "ifm,ac14xx", NULL }; /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init mpc5121_generic_probe(void) +static int __init mpc512x_generic_probe(void) { return of_flat_dt_match(of_get_flat_dt_root(), board); } -define_machine(mpc5121_generic) { - .name = "MPC5121 generic", - .probe = mpc5121_generic_probe, +define_machine(mpc512x_generic) { + .name = "MPC512x generic", + .probe = mpc512x_generic_probe, .init = mpc512x_init, .init_early = mpc512x_init_diu, .setup_arch = mpc512x_setup_diu, diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index d30235b7e3f7..7642cd7aad73 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -330,26 +330,34 @@ void __init mpc512x_init_IRQ(void) static struct of_device_id __initdata of_bus_ids[] = { { .compatible = "fsl,mpc5121-immr", }, { .compatible = "fsl,mpc5121-localbus", }, + { .compatible = "fsl,mpc5121-mbx", }, + { .compatible = "fsl,mpc5121-nfc", }, + { .compatible = "fsl,mpc5121-sram", }, + { .compatible = "fsl,mpc5121-pci", }, + { .compatible = "gpio-leds", }, {}, }; void __init mpc512x_declare_of_platform_devices(void) { - struct device_node *np; - if (of_platform_bus_probe(NULL, of_bus_ids, NULL)) printk(KERN_ERR __FILE__ ": " "Error while probing of_platform bus\n"); - - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc"); - if (np) { - of_platform_device_create(np, NULL, NULL); - of_node_put(np); - } } #define DEFAULT_FIFO_SIZE 16 +const char *mpc512x_select_psc_compat(void) +{ + if (of_machine_is_compatible("fsl,mpc5121")) + return "fsl,mpc5121-psc"; + + if (of_machine_is_compatible("fsl,mpc5125")) + return "fsl,mpc5125-psc"; + + return NULL; +} + static unsigned int __init get_fifo_size(struct device_node *np, char *prop_name) { @@ -375,9 +383,16 @@ void __init mpc512x_psc_fifo_init(void) void __iomem *psc; unsigned int tx_fifo_size; unsigned int rx_fifo_size; + const char *psc_compat; int fifobase = 0; /* current fifo address in 32 bit words */ - for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { + psc_compat = mpc512x_select_psc_compat(); + if (!psc_compat) { + pr_err("%s: no compatible devices found\n", __func__); + return; + } + + for_each_compatible_node(np, NULL, psc_compat) { tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); |