summaryrefslogtreecommitdiff
path: root/arch/sh
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/Kconfig.debug69
-rw-r--r--arch/sh/include/asm/kgdb.h66
-rw-r--r--arch/sh/include/asm/system.h2
-rw-r--r--arch/sh/kernel/Makefile_322
-rw-r--r--arch/sh/kernel/cpu/sh3/entry.S10
-rw-r--r--arch/sh/kernel/cpu/sh3/ex.S2
-rw-r--r--arch/sh/kernel/debugtraps.S13
-rw-r--r--arch/sh/kernel/entry-common.S10
-rw-r--r--arch/sh/kernel/kgdb.c285
-rw-r--r--arch/sh/kernel/kgdb_jmp.S33
-rw-r--r--arch/sh/kernel/kgdb_stub.c1052
-rw-r--r--arch/sh/kernel/time_32.c7
-rw-r--r--arch/sh/kernel/traps_32.c14
-rw-r--r--arch/sh/mm/fault_32.c6
15 files changed, 328 insertions, 1244 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ff7a1f358a36..ff3c137deac3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -27,6 +27,7 @@ config SUPERH32
select HAVE_FUNCTION_TRACER
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
+ select HAVE_ARCH_KGDB
config SUPERH64
def_bool y if CPU_SH5
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8f0c1fbd51a6..834a2d24342b 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -98,19 +98,6 @@ config IRQSTACKS
for handling hard and soft interrupts. This can help avoid
overflowing the process kernel stacks.
-config SH_KGDB
- bool "Include KGDB kernel debugger"
- select FRAME_POINTER
- select DEBUG_INFO
- depends on CPU_SH3 || CPU_SH4
- help
- Include in-kernel hooks for kgdb, the Linux kernel source level
- debugger. See <http://kgdb.sourceforge.net/> for more information.
- Unless you are intending to debug the kernel, say N here.
-
-menu "KGDB configuration options"
- depends on SH_KGDB
-
config MORE_COMPILE_OPTIONS
bool "Add any additional compile options"
help
@@ -122,62 +109,6 @@ config COMPILE_OPTIONS
string "Additional compile arguments"
depends on MORE_COMPILE_OPTIONS
-config KGDB_NMI
- def_bool n
- prompt "Enter KGDB on NMI"
-
-config SH_KGDB_CONSOLE
- def_bool n
- prompt "Console messages through GDB"
- depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
- select SERIAL_CORE_CONSOLE
-
-config KGDB_SYSRQ
- def_bool y
- prompt "Allow SysRq 'G' to enter KGDB"
- depends on MAGIC_SYSRQ
-
-comment "Serial port setup"
-
-config KGDB_DEFPORT
- int "Port number (ttySCn)"
- default "1"
-
-config KGDB_DEFBAUD
- int "Baud rate"
- default "115200"
-
-choice
- prompt "Parity"
- depends on SH_KGDB
- default KGDB_DEFPARITY_N
-
-config KGDB_DEFPARITY_N
- bool "None"
-
-config KGDB_DEFPARITY_E
- bool "Even"
-
-config KGDB_DEFPARITY_O
- bool "Odd"
-
-endchoice
-
-choice
- prompt "Data bits"
- depends on SH_KGDB
- default KGDB_DEFBITS_8
-
-config KGDB_DEFBITS_8
- bool "8"
-
-config KGDB_DEFBITS_7
- bool "7"
-
-endchoice
-
-endmenu
-
if SUPERH64
config SH64_SR_WATCH
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
index 24e42078f36f..72704ed725e5 100644
--- a/arch/sh/include/asm/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
@@ -1,21 +1,7 @@
-/*
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Based on original code by Glenn Engel, Jim Kingdon,
- * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
- * Amit S. Kale <akale@veritas.com>
- *
- * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
- * Henry Bell <henry.bell@st.com>
- *
- * Header file for low-level support for remote debug using GDB.
- *
- */
-
-#ifndef __KGDB_H
-#define __KGDB_H
+#ifndef __ASM_SH_KGDB_H
+#define __ASM_SH_KGDB_H
+#include <asm/cacheflush.h>
#include <asm/ptrace.h>
/* Same as pt_regs but has vbr in place of syscall_nr */
@@ -30,40 +16,26 @@ struct kgdb_regs {
unsigned long vbr;
};
-/* State info */
-extern char kgdb_in_gdb_mode;
-extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */
-extern char in_nmi; /* Debounce flag to prevent NMI reentry*/
+enum regnames {
+ GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
+ GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
-/* SCI */
-extern int kgdb_portnum;
-extern int kgdb_baud;
-extern char kgdb_parity;
-extern char kgdb_bits;
+ GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
+};
-/* Init and interface stuff */
-extern int kgdb_init(void);
-extern int (*kgdb_getchar)(void);
-extern void (*kgdb_putchar)(int);
+#define NUMREGBYTES ((GDB_VBR + 1) * 4)
-/* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
-typedef void (kgdb_bus_error_hook_t)(void);
-extern kgdb_debug_hook_t *kgdb_debug_hook;
-extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
+static inline void arch_kgdb_breakpoint(void)
+{
+ __asm__ __volatile__ ("trapa #0x3c\n");
+}
-/* Console */
-struct console;
-void kgdb_console_write(struct console *co, const char *s, unsigned count);
-extern int kgdb_console_setup(struct console *, char *);
+/* State info */
+extern char in_nmi; /* Debounce flag to prevent NMI reentry*/
-/* Prototypes for jmp fns */
-#define _JBLEN 9
-typedef int jmp_buf[_JBLEN];
-extern void longjmp(jmp_buf __jmpb, int __retval);
-extern int setjmp(jmp_buf __jmpb);
+#define BUFMAX 2048
-/* Forced breakpoint */
-#define breakpoint() __asm__ __volatile__("trapa #0x3c")
+#define CACHE_FLUSH_IS_SAFE 1
+#define BREAK_INSTR_SIZE 2
-#endif
+#endif /* __ASM_SH_KGDB_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 6160fe445161..c9ec6af8e745 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -175,6 +175,8 @@ asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
BUILD_TRAP_HANDLER(address_error);
BUILD_TRAP_HANDLER(debug);
BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(breakpoint);
+BUILD_TRAP_HANDLER(singlestep);
BUILD_TRAP_HANDLER(fpu_error);
BUILD_TRAP_HANDLER(fpu_state_restore);
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 10a34c3ae647..df25304ad780 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -19,7 +19,7 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_CF_ENABLER) += cf-enabler.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
-obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index f112faa219c3..b4106d0c68ec 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -52,7 +52,7 @@
* syscall #
*
*/
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
NMI_VEC = 0x1c0 ! Must catch early for debounce
#endif
@@ -307,7 +307,7 @@ skip_restore:
6: or k0, k2 ! Set the IMASK-bits
ldc k2, ssr
!
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
! Clear in_nmi
mov.l 6f, k0
mov #0, k1
@@ -320,7 +320,7 @@ skip_restore:
.align 2
5: .long 0x00001000 ! DSP
-#ifdef CONFIG_KGDB_NMI
+#ifdef CONFIG_KGDB
6: .long in_nmi
#endif
7: .long 0x30000000
@@ -377,7 +377,7 @@ tlb_miss:
.balign 512,0,512
interrupt:
mov.l 3f, k3
-#if defined(CONFIG_KGDB_NMI)
+#if defined(CONFIG_KGDB)
mov.l 2f, k2
! Debounce (filter nested NMI)
mov.l @k2, k0
@@ -394,7 +394,7 @@ interrupt:
5: .long NMI_VEC
6: .long in_nmi
0:
-#endif /* defined(CONFIG_KGDB_NMI) */
+#endif /* defined(CONFIG_KGDB) */
bra handle_exception
mov #-1, k2 ! interrupt exception marker
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index dac429726899..e5a0de39a2db 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -26,7 +26,7 @@
#define fpu_error_trap_handler exception_error
#endif
-#if !defined(CONFIG_KGDB_NMI)
+#if !defined(CONFIG_KGDB)
#define kgdb_handle_exception exception_error
#endif
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
index 13b66746410a..591741383ee6 100644
--- a/arch/sh/kernel/debugtraps.S
+++ b/arch/sh/kernel/debugtraps.S
@@ -3,7 +3,7 @@
*
* Debug trap jump tables for SuperH
*
- * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -12,12 +12,13 @@
#include <linux/sys.h>
#include <linux/linkage.h>
-#if !defined(CONFIG_SH_KGDB)
-#define kgdb_handle_exception debug_trap_handler
+#if !defined(CONFIG_KGDB)
+#define breakpoint_trap_handler debug_trap_handler
+#define singlestep_trap_handler debug_trap_handler
#endif
#if !defined(CONFIG_SH_STANDARD_BIOS)
-#define sh_bios_handler debug_trap_handler
+#define sh_bios_handler debug_trap_handler
#endif
.data
@@ -35,7 +36,7 @@ ENTRY(debug_trap_table)
.long debug_trap_handler /* 0x39 */
.long debug_trap_handler /* 0x3a */
.long debug_trap_handler /* 0x3b */
- .long kgdb_handle_exception /* 0x3c */
- .long debug_trap_handler /* 0x3d */
+ .long breakpoint_trap_handler /* 0x3c */
+ .long singlestep_trap_handler /* 0x3d */
.long bug_trap_handler /* 0x3e */
.long sh_bios_handler /* 0x3f */
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index efbb4268875e..d62359cfbbe2 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -308,15 +308,19 @@ ENTRY(system_call)
mov.l 1f, r9
mov.l @r9, r8 ! Read from TRA (Trap Address) Register
#endif
+
+ mov #OFF_TRA, r10
+ add r15, r10
+ mov.l r8, @r10 ! set TRA value to tra
+
/*
* Check the trap type
*/
mov #((0x20 << 2) - 1), r9
cmp/hi r9, r8
bt/s debug_trap ! it's a debug trap..
- mov #OFF_TRA, r9
- add r15, r9
- mov.l r8, @r9 ! set TRA value to tra
+ nop
+
#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 5f, r10
jsr @r10
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
new file mode 100644
index 000000000000..7c747e7d71b8
--- /dev/null
+++ b/arch/sh/kernel/kgdb.c
@@ -0,0 +1,285 @@
+/*
+ * SuperH KGDB support
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+
+char in_nmi = 0; /* Set during NMI to prevent re-entry */
+
+/* Macros for single step instruction identification */
+#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
+#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
+#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
+ (((op) & 0x7f ) << 1))
+#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
+#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
+#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
+#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+ (((op) & 0x7ff) << 1))
+#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
+#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
+#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
+#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
+ (((op) & 0x7ff) << 1))
+#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
+#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
+#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
+#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
+#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
+#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
+#define OPCODE_RTS(op) ((op) == 0xb)
+#define OPCODE_RTE(op) ((op) == 0x2b)
+
+#define SR_T_BIT_MASK 0x1
+#define STEP_OPCODE 0xc33d
+
+/* Calculate the new address for after a step */
+static short *get_step_address(struct pt_regs *linux_regs)
+{
+ opcode_t op = __raw_readw(linux_regs->pc);
+ long addr;
+
+ /* BT */
+ if (OPCODE_BT(op)) {
+ if (linux_regs->sr & SR_T_BIT_MASK)
+ addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+ else
+ addr = linux_regs->pc + 2;
+ }
+
+ /* BTS */
+ else if (OPCODE_BTS(op)) {
+ if (linux_regs->sr & SR_T_BIT_MASK)
+ addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+ else
+ addr = linux_regs->pc + 4; /* Not in delay slot */
+ }
+
+ /* BF */
+ else if (OPCODE_BF(op)) {
+ if (!(linux_regs->sr & SR_T_BIT_MASK))
+ addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+ else
+ addr = linux_regs->pc + 2;
+ }
+
+ /* BFS */
+ else if (OPCODE_BFS(op)) {
+ if (!(linux_regs->sr & SR_T_BIT_MASK))
+ addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
+ else
+ addr = linux_regs->pc + 4; /* Not in delay slot */
+ }
+
+ /* BRA */
+ else if (OPCODE_BRA(op))
+ addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
+
+ /* BRAF */
+ else if (OPCODE_BRAF(op))
+ addr = linux_regs->pc + 4
+ + linux_regs->regs[OPCODE_BRAF_REG(op)];
+
+ /* BSR */
+ else if (OPCODE_BSR(op))
+ addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
+
+ /* BSRF */
+ else if (OPCODE_BSRF(op))
+ addr = linux_regs->pc + 4
+ + linux_regs->regs[OPCODE_BSRF_REG(op)];
+
+ /* JMP */
+ else if (OPCODE_JMP(op))
+ addr = linux_regs->regs[OPCODE_JMP_REG(op)];
+
+ /* JSR */
+ else if (OPCODE_JSR(op))
+ addr = linux_regs->regs[OPCODE_JSR_REG(op)];
+
+ /* RTS */
+ else if (OPCODE_RTS(op))
+ addr = linux_regs->pr;
+
+ /* RTE */
+ else if (OPCODE_RTE(op))
+ addr = linux_regs->regs[15];
+
+ /* Other */
+ else
+ addr = linux_regs->pc + instruction_size(op);
+
+ flush_icache_range(addr, addr + instruction_size(op));
+ return (short *)addr;
+}
+
+/*
+ * Replace the instruction immediately after the current instruction
+ * (i.e. next in the expected flow of control) with a trap instruction,
+ * so that returning will cause only a single instruction to be executed.
+ * Note that this model is slightly broken for instructions with delay
+ * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
+ * instruction in the delay slot will be executed.
+ */
+
+static unsigned long stepped_address;
+static opcode_t stepped_opcode;
+
+static void do_single_step(struct pt_regs *linux_regs)
+{
+ /* Determine where the target instruction will send us to */
+ unsigned short *addr = get_step_address(linux_regs);
+
+ stepped_address = (int)addr;
+
+ /* Replace it */
+ stepped_opcode = __raw_readw((long)addr);
+ *addr = STEP_OPCODE;
+
+ /* Flush and return */
+ flush_icache_range((long)addr, (long)addr +
+ instruction_size(stepped_opcode));
+}
+
+/* Undo a single step */
+static void undo_single_step(struct pt_regs *linux_regs)
+{
+ /* If we have stepped, put back the old instruction */
+ /* Use stepped_address in case we stopped elsewhere */
+ if (stepped_opcode != 0) {
+ __raw_writew(stepped_opcode, stepped_address);
+ flush_icache_range(stepped_address, stepped_address + 2);
+ }
+
+ stepped_opcode = 0;
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int i;
+
+ for (i = 0; i < 16; i++)
+ gdb_regs[GDB_R0 + i] = regs->regs[i];
+
+ gdb_regs[GDB_PC] = regs->pc;
+ gdb_regs[GDB_PR] = regs->pr;
+ gdb_regs[GDB_SR] = regs->sr;
+ gdb_regs[GDB_GBR] = regs->gbr;
+ gdb_regs[GDB_MACH] = regs->mach;
+ gdb_regs[GDB_MACL] = regs->macl;
+
+ __asm__ __volatile__ ("stc vbr, %0" : "=r" (gdb_regs[GDB_VBR]));
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int i;
+
+ for (i = 0; i < 16; i++)
+ regs->regs[GDB_R0 + i] = gdb_regs[GDB_R0 + i];
+
+ regs->pc = gdb_regs[GDB_PC];
+ regs->pr = gdb_regs[GDB_PR];
+ regs->sr = gdb_regs[GDB_SR];
+ regs->gbr = gdb_regs[GDB_GBR];
+ regs->mach = gdb_regs[GDB_MACH];
+ regs->macl = gdb_regs[GDB_MACL];
+
+ __asm__ __volatile__ ("ldc %0, vbr" : : "r" (gdb_regs[GDB_VBR]));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[GDB_R15] = p->thread.sp;
+ gdb_regs[GDB_PC] = p->thread.pc;
+}
+
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+ char *remcomInBuffer, char *remcomOutBuffer,
+ struct pt_regs *linux_regs)
+{
+ unsigned long addr;
+ char *ptr;
+
+ /* Undo any stepping we may have done */
+ undo_single_step(linux_regs);
+
+ switch (remcomInBuffer[0]) {
+ case 'c':
+ case 's':
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcomInBuffer[1];
+ if (kgdb_hex2long(&ptr, &addr))
+ linux_regs->pc = addr;
+ case 'D':
+ case 'k':
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+ if (remcomInBuffer[0] == 's') {
+ do_single_step(linux_regs);
+ kgdb_single_step = 1;
+
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
+ }
+
+ return 0;
+ }
+
+ /* this means that we do not want to exit from the handler: */
+ return -1;
+}
+
+/*
+ * The primary entry points for the kgdb debug trap table entries.
+ */
+BUILD_TRAP_HANDLER(singlestep)
+{
+ unsigned long flags;
+ TRAP_HANDLER_DECL;
+
+ local_irq_save(flags);
+ regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
+ kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+ local_irq_restore(flags);
+}
+
+
+BUILD_TRAP_HANDLER(breakpoint)
+{
+ unsigned long flags;
+ TRAP_HANDLER_DECL;
+
+ local_irq_save(flags);
+ kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+ local_irq_restore(flags);
+}
+
+int kgdb_arch_init(void)
+{
+ return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ /* Breakpoint instruction: trapa #0x3c */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ .gdb_bpt_instr = { 0x3c, 0xc3 },
+#else
+ .gdb_bpt_instr = { 0xc3, 0x3c },
+#endif
+};
diff --git a/arch/sh/kernel/kgdb_jmp.S b/arch/sh/kernel/kgdb_jmp.S
deleted file mode 100644
index 339bb1d7ff0b..000000000000
--- a/arch/sh/kernel/kgdb_jmp.S
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <linux/linkage.h>
-
-ENTRY(setjmp)
- add #(9*4), r4
- sts.l pr, @-r4
- mov.l r15, @-r4
- mov.l r14, @-r4
- mov.l r13, @-r4
- mov.l r12, @-r4
- mov.l r11, @-r4
- mov.l r10, @-r4
- mov.l r9, @-r4
- mov.l r8, @-r4
- rts
- mov #0, r0
-
-ENTRY(longjmp)
- mov.l @r4+, r8
- mov.l @r4+, r9
- mov.l @r4+, r10
- mov.l @r4+, r11
- mov.l @r4+, r12
- mov.l @r4+, r13
- mov.l @r4+, r14
- mov.l @r4+, r15
- lds.l @r4+, pr
- mov r5, r0
- tst r0, r0
- bf 1f
- mov #1, r0 ! in case val==0
-1: rts
- nop
-
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
deleted file mode 100644
index bf8ac4c71640..000000000000
--- a/arch/sh/kernel/kgdb_stub.c
+++ /dev/null
@@ -1,1052 +0,0 @@
-/*
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Contains extracts from code by Glenn Engel, Jim Kingdon,
- * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
- * Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>,
- * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- *
- * This version by Henry Bell <henry.bell@st.com>
- * Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- *
- * Contains low-level support for remote debug using GDB.
- *
- * To enable debugger support, two things need to happen. A call to
- * set_debug_traps() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * A breakpoint also needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint() which does
- * a trapa if the initialisation phase has been successfully completed.
- *
- * In this case, set_debug_traps() is not used to "take over" exceptions;
- * other kernel code is modified instead to enter the kgdb functions here
- * when appropriate (see entry.S for breakpoint traps and NMI interrupts,
- * see traps.c for kernel error exceptions).
- *
- * The following gdb commands are supported:
- *
- * Command Function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- * XAA..AA,LLLL: Same, but data is binary (not hex) OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- * CNN; Resume at current address with signal SNN
- * CNN;AA..AA Resume at address AA..AA with signal SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- * SNN; Step one instruction with signal SNN
- * SNNAA..AA Step one instruction from AA..AA w/NN SNN
- *
- * k kill (Detach GDB)
- *
- * d Toggle debug flag
- * D Detach GDB
- *
- * Hct Set thread t for operations, OK or ENN
- * c = 'c' (step, cont), c = 'g' (other
- * operations)
- *
- * qC Query current thread ID QCpid
- * qfThreadInfo Get list of current threads (first) m<id>
- * qsThreadInfo " " " " " (subsequent)
- * qOffsets Get section offsets Text=x;Data=y;Bss=z
- *
- * TXX Find if thread XX is alive OK or ENN
- * ? What was the last sigval ? SNN (signal NN)
- * O Output to GDB console
- *
- * Remote communication protocol.
- *
- * A debug packet whose contents are <data> is encapsulated for
- * transmission in the form:
- *
- * $ <data> # CSUM1 CSUM2
- *
- * <data> must be ASCII alphanumeric and cannot include characters
- * '$' or '#'. If <data> starts with two characters followed by
- * ':', then the existing stubs interpret this as a sequence number.
- *
- * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
- * checksum of <data>, the most significant nibble is sent first.
- * the hex digits 0-9,a-f are used.
- *
- * Receiver responds with:
- *
- * + - if CSUM is correct and ready for next packet
- * - - if CSUM is incorrect
- *
- * Responses can be run-length encoded to save space. A '*' means that
- * the next character is an ASCII encoding giving a repeat count which
- * stands for that many repetitions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3
- * (which is where RLE starts to win). Don't use an n > 126.
- *
- * So "0* " means the same as "0000".
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/module.h>
-#include <asm/system.h>
-#include <asm/cacheflush.h>
-#include <asm/current.h>
-#include <asm/signal.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-#include <asm/kgdb.h>
-#include <asm/io.h>
-
-/* Function pointers for linkage */
-kgdb_debug_hook_t *kgdb_debug_hook;
-kgdb_bus_error_hook_t *kgdb_bus_err_hook;
-
-int (*kgdb_getchar)(void);
-EXPORT_SYMBOL_GPL(kgdb_getchar);
-void (*kgdb_putchar)(int);
-EXPORT_SYMBOL_GPL(kgdb_putchar);
-
-static void put_debug_char(int c)
-{
- if (!kgdb_putchar)
- return;
- (*kgdb_putchar)(c);
-}
-static int get_debug_char(void)
-{
- if (!kgdb_getchar)
- return -1;
- return (*kgdb_getchar)();
-}
-
-/* Num chars in in/out bound buffers, register packets need NUMREGBYTES * 2 */
-#define BUFMAX 1024
-#define NUMREGBYTES (MAXREG*4)
-#define OUTBUFMAX (NUMREGBYTES*2+512)
-
-enum {
- R0 = 0, R1, R2, R3, R4, R5, R6, R7,
- R8, R9, R10, R11, R12, R13, R14, R15,
- PC, PR, GBR, VBR, MACH, MACL, SR,
- /* */
- MAXREG
-};
-
-static unsigned int registers[MAXREG];
-struct kgdb_regs trap_registers;
-
-char kgdb_in_gdb_mode;
-char in_nmi; /* Set during NMI to prevent reentry */
-int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */
-
-/* Default values for SCI (can override via kernel args in setup.c) */
-#ifndef CONFIG_KGDB_DEFPORT
-#define CONFIG_KGDB_DEFPORT 1
-#endif
-
-#ifndef CONFIG_KGDB_DEFBAUD
-#define CONFIG_KGDB_DEFBAUD 115200
-#endif
-
-#if defined(CONFIG_KGDB_DEFPARITY_E)
-#define CONFIG_KGDB_DEFPARITY 'E'
-#elif defined(CONFIG_KGDB_DEFPARITY_O)
-#define CONFIG_KGDB_DEFPARITY 'O'
-#else /* CONFIG_KGDB_DEFPARITY_N */
-#define CONFIG_KGDB_DEFPARITY 'N'
-#endif
-
-#ifdef CONFIG_KGDB_DEFBITS_7
-#define CONFIG_KGDB_DEFBITS '7'
-#else /* CONFIG_KGDB_DEFBITS_8 */
-#define CONFIG_KGDB_DEFBITS '8'
-#endif
-
-/* SCI/UART settings, used in kgdb_console_setup() */
-int kgdb_portnum = CONFIG_KGDB_DEFPORT;
-EXPORT_SYMBOL_GPL(kgdb_portnum);
-int kgdb_baud = CONFIG_KGDB_DEFBAUD;
-EXPORT_SYMBOL_GPL(kgdb_baud);
-char kgdb_parity = CONFIG_KGDB_DEFPARITY;
-EXPORT_SYMBOL_GPL(kgdb_parity);
-char kgdb_bits = CONFIG_KGDB_DEFBITS;
-EXPORT_SYMBOL_GPL(kgdb_bits);
-
-/* Jump buffer for setjmp/longjmp */
-static jmp_buf rem_com_env;
-
-/* TRA differs sh3/4 */
-#if defined(CONFIG_CPU_SH3)
-#define TRA 0xffffffd0
-#elif defined(CONFIG_CPU_SH4)
-#define TRA 0xff000020
-#endif
-
-/* Macros for single step instruction identification */
-#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
-#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
-#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
- (((op) & 0x7f ) << 1))
-#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
-#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
-#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
-#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
-#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
-#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
-#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
-#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
-#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
-#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_RTS(op) ((op) == 0xb)
-#define OPCODE_RTE(op) ((op) == 0x2b)
-
-#define SR_T_BIT_MASK 0x1
-#define STEP_OPCODE 0xc320
-#define BIOS_CALL_TRAP 0x3f
-
-/* Exception codes as per SH-4 core manual */
-#define ADDRESS_ERROR_LOAD_VEC 7
-#define ADDRESS_ERROR_STORE_VEC 8
-#define TRAP_VEC 11
-#define INVALID_INSN_VEC 12
-#define INVALID_SLOT_VEC 13
-#define NMI_VEC 14
-#define USER_BREAK_VEC 15
-#define SERIAL_BREAK_VEC 58
-
-/* Misc static */
-static int stepped_address;
-static short stepped_opcode;
-static char in_buffer[BUFMAX];
-static char out_buffer[OUTBUFMAX];
-
-static void kgdb_to_gdb(const char *s);
-
-/* Convert ch to hex */
-static int hex(const char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return (ch - 'a' + 10);
- if ((ch >= '0') && (ch <= '9'))
- return (ch - '0');
- if ((ch >= 'A') && (ch <= 'F'))
- return (ch - 'A' + 10);
- return (-1);
-}
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- Returns a pointer to the last char put in buf (null) */
-static char *mem_to_hex(const char *mem, char *buf, const int count)
-{
- int i;
- int ch;
- unsigned short s_val;
- unsigned long l_val;
-
- /* Check for 16 or 32 */
- if (count == 2 && ((long) mem & 1) == 0) {
- s_val = *(unsigned short *) mem;
- mem = (char *) &s_val;
- } else if (count == 4 && ((long) mem & 3) == 0) {
- l_val = *(unsigned long *) mem;
- mem = (char *) &l_val;
- }
- for (i = 0; i < count; i++) {
- ch = *mem++;
- buf = pack_hex_byte(buf, ch);
- }
- *buf = 0;
- return (buf);
-}
-
-/* Convert the hex array pointed to by buf into binary, to be placed in mem.
- Return a pointer to the character after the last byte written */
-static char *hex_to_mem(const char *buf, char *mem, const int count)
-{
- int i;
- unsigned char ch;
-
- for (i = 0; i < count; i++) {
- ch = hex(*buf++) << 4;
- ch = ch + hex(*buf++);
- *mem++ = ch;
- }
- return (mem);
-}
-
-/* While finding valid hex chars, convert to an integer, then return it */
-static int hex_to_int(char **ptr, int *int_value)
-{
- int num_chars = 0;
- int hex_value;
-
- *int_value = 0;
-
- while (**ptr) {
- hex_value = hex(**ptr);
- if (hex_value >= 0) {
- *int_value = (*int_value << 4) | hex_value;
- num_chars++;
- } else
- break;
- (*ptr)++;
- }
- return num_chars;
-}
-
-/* Copy the binary array pointed to by buf into mem. Fix $, #,
- and 0x7d escaped with 0x7d. Return a pointer to the character
- after the last byte written. */
-static char *ebin_to_mem(const char *buf, char *mem, int count)
-{
- for (; count > 0; count--, buf++) {
- if (*buf == 0x7d)
- *mem++ = *(++buf) ^ 0x20;
- else
- *mem++ = *buf;
- }
- return mem;
-}
-
-/* Scan for the start char '$', read the packet and check the checksum */
-static void get_packet(char *buffer, int buflen)
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- char ch;
-
- do {
- /* Ignore everything until the start character */
- while ((ch = get_debug_char()) != '$');
-
- checksum = 0;
- xmitcsum = -1;
- count = 0;
-
- /* Now, read until a # or end of buffer is found */
- while (count < (buflen - 1)) {
- ch = get_debug_char();
-
- if (ch == '#')
- break;
-
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- buffer[count] = 0;
-
- /* Continue to read checksum following # */
- if (ch == '#') {
- xmitcsum = hex(get_debug_char()) << 4;
- xmitcsum += hex(get_debug_char());
-
- /* Checksum */
- if (checksum != xmitcsum)
- put_debug_char('-'); /* Failed checksum */
- else {
- /* Ack successful transfer */
- put_debug_char('+');
-
- /* If a sequence char is present, reply
- the sequence ID */
- if (buffer[2] == ':') {
- put_debug_char(buffer[0]);
- put_debug_char(buffer[1]);
-
- /* Remove sequence chars from buffer */
- count = strlen(buffer);
- for (i = 3; i <= count; i++)
- buffer[i - 3] = buffer[i];
- }
- }
- }
- }
- while (checksum != xmitcsum); /* Keep trying while we fail */
-}
-
-/* Send the packet in the buffer with run-length encoding */
-static void put_packet(char *buffer)
-{
- int checksum;
- char *src;
- int runlen;
- int encode;
-
- do {
- src = buffer;
- put_debug_char('$');
- checksum = 0;
-
- /* Continue while we still have chars left */
- while (*src) {
- /* Check for runs up to 99 chars long */
- for (runlen = 1; runlen < 99; runlen++) {
- if (src[0] != src[runlen])
- break;
- }
-
- if (runlen > 3) {
- /* Got a useful amount, send encoding */
- encode = runlen + ' ' - 4;
- put_debug_char(*src); checksum += *src;
- put_debug_char('*'); checksum += '*';
- put_debug_char(encode); checksum += encode;
- src += runlen;
- } else {
- /* Otherwise just send the current char */
- put_debug_char(*src); checksum += *src;
- src += 1;
- }
- }
-
- /* '#' Separator, put high and low components of checksum */
- put_debug_char('#');
- put_debug_char(hex_asc_hi(checksum));
- put_debug_char(hex_asc_lo(checksum));
- }
- while ((get_debug_char()) != '+'); /* While no ack */
-}
-
-/* A bus error has occurred - perform a longjmp to return execution and
- allow handling of the error */
-static void kgdb_handle_bus_error(void)
-{
- longjmp(rem_com_env, 1);
-}
-
-/* Translate SH-3/4 exception numbers to unix-like signal values */
-static int compute_signal(const int excep_code)
-{
- int sigval;
-
- switch (excep_code) {
-
- case INVALID_INSN_VEC:
- case INVALID_SLOT_VEC:
- sigval = SIGILL;
- break;
- case ADDRESS_ERROR_LOAD_VEC:
- case ADDRESS_ERROR_STORE_VEC:
- sigval = SIGSEGV;
- break;
-
- case SERIAL_BREAK_VEC:
- case NMI_VEC:
- sigval = SIGINT;
- break;
-
- case USER_BREAK_VEC:
- case TRAP_VEC:
- sigval = SIGTRAP;
- break;
-
- default:
- sigval = SIGBUS; /* "software generated" */
- break;
- }
-
- return (sigval);
-}
-
-/* Make a local copy of the registers passed into the handler (bletch) */
-static void kgdb_regs_to_gdb_regs(const struct kgdb_regs *regs,
- int *gdb_regs)
-{
- gdb_regs[R0] = regs->regs[R0];
- gdb_regs[R1] = regs->regs[R1];
- gdb_regs[R2] = regs->regs[R2];
- gdb_regs[R3] = regs->regs[R3];
- gdb_regs[R4] = regs->regs[R4];
- gdb_regs[R5] = regs->regs[R5];
- gdb_regs[R6] = regs->regs[R6];
- gdb_regs[R7] = regs->regs[R7];
- gdb_regs[R8] = regs->regs[R8];
- gdb_regs[R9] = regs->regs[R9];
- gdb_regs[R10] = regs->regs[R10];
- gdb_regs[R11] = regs->regs[R11];
- gdb_regs[R12] = regs->regs[R12];
- gdb_regs[R13] = regs->regs[R13];
- gdb_regs[R14] = regs->regs[R14];
- gdb_regs[R15] = regs->regs[R15];
- gdb_regs[PC] = regs->pc;
- gdb_regs[PR] = regs->pr;
- gdb_regs[GBR] = regs->gbr;
- gdb_regs[MACH] = regs->mach;
- gdb_regs[MACL] = regs->macl;
- gdb_regs[SR] = regs->sr;
- gdb_regs[VBR] = regs->vbr;
-}
-
-/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
-static void gdb_regs_to_kgdb_regs(const int *gdb_regs,
- struct kgdb_regs *regs)
-{
- regs->regs[R0] = gdb_regs[R0];
- regs->regs[R1] = gdb_regs[R1];
- regs->regs[R2] = gdb_regs[R2];
- regs->regs[R3] = gdb_regs[R3];
- regs->regs[R4] = gdb_regs[R4];
- regs->regs[R5] = gdb_regs[R5];
- regs->regs[R6] = gdb_regs[R6];
- regs->regs[R7] = gdb_regs[R7];
- regs->regs[R8] = gdb_regs[R8];
- regs->regs[R9] = gdb_regs[R9];
- regs->regs[R10] = gdb_regs[R10];
- regs->regs[R11] = gdb_regs[R11];
- regs->regs[R12] = gdb_regs[R12];
- regs->regs[R13] = gdb_regs[R13];
- regs->regs[R14] = gdb_regs[R14];
- regs->regs[R15] = gdb_regs[R15];
- regs->pc = gdb_regs[PC];
- regs->pr = gdb_regs[PR];
- regs->gbr = gdb_regs[GBR];
- regs->mach = gdb_regs[MACH];
- regs->macl = gdb_regs[MACL];
- regs->sr = gdb_regs[SR];
- regs->vbr = gdb_regs[VBR];
-}
-
-/* Calculate the new address for after a step */
-static short *get_step_address(void)
-{
- short op = *(short *) trap_registers.pc;
- long addr;
-
- /* BT */
- if (OPCODE_BT(op)) {
- if (trap_registers.sr & SR_T_BIT_MASK)
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 2;
- }
-
- /* BTS */
- else if (OPCODE_BTS(op)) {
- if (trap_registers.sr & SR_T_BIT_MASK)
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 4; /* Not in delay slot */
- }
-
- /* BF */
- else if (OPCODE_BF(op)) {
- if (!(trap_registers.sr & SR_T_BIT_MASK))
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 2;
- }
-
- /* BFS */
- else if (OPCODE_BFS(op)) {
- if (!(trap_registers.sr & SR_T_BIT_MASK))
- addr = trap_registers.pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = trap_registers.pc + 4; /* Not in delay slot */
- }
-
- /* BRA */
- else if (OPCODE_BRA(op))
- addr = trap_registers.pc + 4 + OPCODE_BRA_DISP(op);
-
- /* BRAF */
- else if (OPCODE_BRAF(op))
- addr = trap_registers.pc + 4
- + trap_registers.regs[OPCODE_BRAF_REG(op)];
-
- /* BSR */
- else if (OPCODE_BSR(op))
- addr = trap_registers.pc + 4 + OPCODE_BSR_DISP(op);
-
- /* BSRF */
- else if (OPCODE_BSRF(op))
- addr = trap_registers.pc + 4
- + trap_registers.regs[OPCODE_BSRF_REG(op)];
-
- /* JMP */
- else if (OPCODE_JMP(op))
- addr = trap_registers.regs[OPCODE_JMP_REG(op)];
-
- /* JSR */
- else if (OPCODE_JSR(op))
- addr = trap_registers.regs[OPCODE_JSR_REG(op)];
-
- /* RTS */
- else if (OPCODE_RTS(op))
- addr = trap_registers.pr;
-
- /* RTE */
- else if (OPCODE_RTE(op))
- addr = trap_registers.regs[15];
-
- /* Other */
- else
- addr = trap_registers.pc + 2;
-
- flush_icache_range(addr, addr + 2);
- return (short *) addr;
-}
-
-/* Set up a single-step. Replace the instruction immediately after the
- current instruction (i.e. next in the expected flow of control) with a
- trap instruction, so that returning will cause only a single instruction
- to be executed. Note that this model is slightly broken for instructions
- with delay slots (e.g. B[TF]S, BSR, BRA etc), where both the branch
- and the instruction in the delay slot will be executed. */
-static void do_single_step(void)
-{
- unsigned short *addr = 0;
-
- /* Determine where the target instruction will send us to */
- addr = get_step_address();
- stepped_address = (int)addr;
-
- /* Replace it */
- stepped_opcode = *(short *)addr;
- *addr = STEP_OPCODE;
-
- /* Flush and return */
- flush_icache_range((long) addr, (long) addr + 2);
-}
-
-/* Undo a single step */
-static void undo_single_step(void)
-{
- /* If we have stepped, put back the old instruction */
- /* Use stepped_address in case we stopped elsewhere */
- if (stepped_opcode != 0) {
- *(short*)stepped_address = stepped_opcode;
- flush_icache_range(stepped_address, stepped_address + 2);
- }
- stepped_opcode = 0;
-}
-
-/* Send a signal message */
-static void send_signal_msg(const int signum)
-{
- out_buffer[0] = 'S';
- out_buffer[1] = hex_asc_hi(signum);
- out_buffer[2] = hex_asc_lo(signum);
- out_buffer[3] = 0;
- put_packet(out_buffer);
-}
-
-/* Reply that all was well */
-static void send_ok_msg(void)
-{
- strcpy(out_buffer, "OK");
- put_packet(out_buffer);
-}
-
-/* Reply that an error occurred */
-static void send_err_msg(void)
-{
- strcpy(out_buffer, "E01");
- put_packet(out_buffer);
-}
-
-/* Empty message indicates unrecognised command */
-static void send_empty_msg(void)
-{
- put_packet("");
-}
-
-/* Read memory due to 'm' message */
-static void read_mem_msg(void)
-{
- char *ptr;
- int addr;
- int length;
-
- /* Jmp, disable bus error handler */
- if (setjmp(rem_com_env) == 0) {
-
- kgdb_nofault = 1;
-
- /* Walk through, have m<addr>,<length> */
- ptr = &in_buffer[1];
- if (hex_to_int(&ptr, &addr) && (*ptr++ == ','))
- if (hex_to_int(&ptr, &length)) {
- ptr = 0;
- if (length * 2 > OUTBUFMAX)
- length = OUTBUFMAX / 2;
- mem_to_hex((char *) addr, out_buffer, length);
- }
- if (ptr)
- send_err_msg();
- else
- put_packet(out_buffer);
- } else
- send_err_msg();
-
- /* Restore bus error handler */
- kgdb_nofault = 0;
-}
-
-/* Write memory due to 'M' or 'X' message */
-static void write_mem_msg(int binary)
-{
- char *ptr;
- int addr;
- int length;
-
- if (setjmp(rem_com_env) == 0) {
-
- kgdb_nofault = 1;
-
- /* Walk through, have M<addr>,<length>:<data> */
- ptr = &in_buffer[1];
- if (hex_to_int(&ptr, &addr) && (*ptr++ == ','))
- if (hex_to_int(&ptr, &length) && (*ptr++ == ':')) {
- if (binary)
- ebin_to_mem(ptr, (char*)addr, length);
- else
- hex_to_mem(ptr, (char*)addr, length);
- flush_icache_range(addr, addr + length);
- ptr = 0;
- send_ok_msg();
- }
- if (ptr)
- send_err_msg();
- } else
- send_err_msg();
-
- /* Restore bus error handler */
- kgdb_nofault = 0;
-}
-
-/* Continue message */
-static void continue_msg(void)
-{
- /* Try to read optional parameter, PC unchanged if none */
- char *ptr = &in_buffer[1];
- int addr;
-
- if (hex_to_int(&ptr, &addr))
- trap_registers.pc = addr;
-}
-
-/* Continue message with signal */
-static void continue_with_sig_msg(void)
-{
- int signal;
- char *ptr = &in_buffer[1];
- int addr;
-
- /* Report limitation */
- kgdb_to_gdb("Cannot force signal in kgdb, continuing anyway.\n");
-
- /* Signal */
- hex_to_int(&ptr, &signal);
- if (*ptr == ';')
- ptr++;
-
- /* Optional address */
- if (hex_to_int(&ptr, &addr))
- trap_registers.pc = addr;
-}
-
-/* Step message */
-static void step_msg(void)
-{
- continue_msg();
- do_single_step();
-}
-
-/* Step message with signal */
-static void step_with_sig_msg(void)
-{
- continue_with_sig_msg();
- do_single_step();
-}
-
-/* Send register contents */
-static void send_regs_msg(void)
-{
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- mem_to_hex((char *) registers, out_buffer, NUMREGBYTES);
- put_packet(out_buffer);
-}
-
-/* Set register contents - currently can't set other thread's registers */
-static void set_regs_msg(void)
-{
- kgdb_regs_to_gdb_regs(&trap_registers, registers);
- hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
- gdb_regs_to_kgdb_regs(registers, &trap_registers);
- send_ok_msg();
-}
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * Bring up the ports..
- */
-static int __init kgdb_serial_setup(void)
-{
- struct console dummy;
- return kgdb_console_setup(&dummy, 0);
-}
-#else
-#define kgdb_serial_setup() 0
-#endif
-
-/* The command loop, read and act on requests */
-static void kgdb_command_loop(const int excep_code, const int trapa_value)
-{
- int sigval;
-
- /* Enter GDB mode (e.g. after detach) */
- if (!kgdb_in_gdb_mode) {
- /* Do serial setup, notify user, issue preemptive ack */
- printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
- kgdb_in_gdb_mode = 1;
- put_debug_char('+');
- }
-
- /* Reply to host that an exception has occurred */
- sigval = compute_signal(excep_code);
- send_signal_msg(sigval);
-
- /* TRAP_VEC exception indicates a software trap inserted in place of
- code by GDB so back up PC by one instruction, as this instruction
- will later be replaced by its original one. Do NOT do this for
- trap 0xff, since that indicates a compiled-in breakpoint which
- will not be replaced (and we would retake the trap forever) */
- if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
- trap_registers.pc -= 2;
-
- /* Undo any stepping we may have done */
- undo_single_step();
-
- while (1) {
- out_buffer[0] = 0;
- get_packet(in_buffer, BUFMAX);
-
- /* Examine first char of buffer to see what we need to do */
- switch (in_buffer[0]) {
- case '?': /* Send which signal we've received */
- send_signal_msg(sigval);
- break;
-
- case 'g': /* Return the values of the CPU registers */
- send_regs_msg();
- break;
-
- case 'G': /* Set the value of the CPU registers */
- set_regs_msg();
- break;
-
- case 'm': /* Read LLLL bytes address AA..AA */
- read_mem_msg();
- break;
-
- case 'M': /* Write LLLL bytes address AA..AA, ret OK */
- write_mem_msg(0); /* 0 = data in hex */
- break;
-
- case 'X': /* Write LLLL bytes esc bin address AA..AA */
- if (kgdb_bits == '8')
- write_mem_msg(1); /* 1 = data in binary */
- else
- send_empty_msg();
- break;
-
- case 'C': /* Continue, signum included, we ignore it */
- continue_with_sig_msg();
- return;
-
- case 'c': /* Continue at address AA..AA (optional) */
- continue_msg();
- return;
-
- case 'S': /* Step, signum included, we ignore it */
- step_with_sig_msg();
- return;
-
- case 's': /* Step one instruction from AA..AA */
- step_msg();
- return;
-
- case 'k': /* 'Kill the program' with a kernel ? */
- break;
-
- case 'D': /* Detach from program, send reply OK */
- kgdb_in_gdb_mode = 0;
- send_ok_msg();
- get_debug_char();
- return;
-
- default:
- send_empty_msg();
- break;
- }
- }
-}
-
-/* There has been an exception, most likely a breakpoint. */
-static void handle_exception(struct pt_regs *regs)
-{
- int excep_code, vbr_val;
- int count;
- int trapa_value = ctrl_inl(TRA);
-
- /* Copy kernel regs (from stack) */
- for (count = 0; count < 16; count++)
- trap_registers.regs[count] = regs->regs[count];
- trap_registers.pc = regs->pc;
- trap_registers.pr = regs->pr;
- trap_registers.sr = regs->sr;
- trap_registers.gbr = regs->gbr;
- trap_registers.mach = regs->mach;
- trap_registers.macl = regs->macl;
-
- asm("stc vbr, %0":"=r"(vbr_val));
- trap_registers.vbr = vbr_val;
-
- /* Get excode for command loop call, user access */
- asm("stc r2_bank, %0":"=r"(excep_code));
-
- /* Act on the exception */
- kgdb_command_loop(excep_code, trapa_value);
-
- /* Copy back the (maybe modified) registers */
- for (count = 0; count < 16; count++)
- regs->regs[count] = trap_registers.regs[count];
- regs->pc = trap_registers.pc;
- regs->pr = trap_registers.pr;
- regs->sr = trap_registers.sr;
- regs->gbr = trap_registers.gbr;
- regs->mach = trap_registers.mach;
- regs->macl = trap_registers.macl;
-
- vbr_val = trap_registers.vbr;
- asm("ldc %0, vbr": :"r"(vbr_val));
-}
-
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs __regs)
-{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
- handle_exception(regs);
-}
-
-/* Initialise the KGDB data structures and serial configuration */
-int __init kgdb_init(void)
-{
- in_nmi = 0;
- kgdb_nofault = 0;
- stepped_opcode = 0;
- kgdb_in_gdb_mode = 0;
-
- if (kgdb_serial_setup() != 0) {
- printk(KERN_NOTICE "KGDB: serial setup error\n");
- return -1;
- }
-
- /* Init ptr to exception handler */
- kgdb_debug_hook = handle_exception;
- kgdb_bus_err_hook = kgdb_handle_bus_error;
-
- /* Enter kgdb now if requested, or just report init done */
- printk(KERN_NOTICE "KGDB: stub is initialized.\n");
-
- return 0;
-}
-
-/* Make function available for "user messages"; console will use it too. */
-
-char gdbmsgbuf[BUFMAX];
-#define MAXOUT ((BUFMAX-2)/2)
-
-static void kgdb_msg_write(const char *s, unsigned count)
-{
- int i;
- int wcount;
- char *bufptr;
-
- /* 'O'utput */
- gdbmsgbuf[0] = 'O';
-
- /* Fill and send buffers... */
- while (count > 0) {
- bufptr = gdbmsgbuf + 1;
-
- /* Calculate how many this time */
- wcount = (count > MAXOUT) ? MAXOUT : count;
-
- /* Pack in hex chars */
- for (i = 0; i < wcount; i++)
- bufptr = pack_hex_byte(bufptr, s[i]);
- *bufptr = '\0';
-
- /* Move up */
- s += wcount;
- count -= wcount;
-
- /* Write packet */
- put_packet(gdbmsgbuf);
- }
-}
-
-static void kgdb_to_gdb(const char *s)
-{
- kgdb_msg_write(s, strlen(s));
-}
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-void kgdb_console_write(struct console *co, const char *s, unsigned count)
-{
- /* Bail if we're not talking to GDB */
- if (!kgdb_in_gdb_mode)
- return;
-
- kgdb_msg_write(s, count);
-}
-#endif
-
-#ifdef CONFIG_KGDB_SYSRQ
-static void sysrq_handle_gdb(int key, struct tty_struct *tty)
-{
- printk("Entering GDB stub\n");
- breakpoint();
-}
-
-static struct sysrq_key_op sysrq_gdb_op = {
- .handler = sysrq_handle_gdb,
- .help_msg = "Gdb",
- .action_msg = "GDB",
-};
-
-static int gdb_register_sysrq(void)
-{
- printk("Registering GDB sysrq handler\n");
- register_sysrq_key('g', &sysrq_gdb_op);
- return 0;
-}
-module_init(gdb_register_sysrq);
-#endif
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 23ca711c27d2..1336f275326c 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -277,11 +277,4 @@ void __init time_init(void)
((sh_hpt_frequency + 500) / 1000) / 1000,
((sh_hpt_frequency + 500) / 1000) % 1000);
-#if defined(CONFIG_SH_KGDB)
- /*
- * Set up kgdb as requested. We do it here because the serial
- * init uses the timer vars we just set up for figuring baud.
- */
- kgdb_init();
-#endif
}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 6094fc13beea..88807a2aacc3 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -28,17 +28,6 @@
#include <asm/fpu.h>
#include <asm/kprobes.h>
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-#define CHK_REMOTE_DEBUG(regs) \
-{ \
- if (kgdb_debug_hook && !user_mode(regs))\
- (*kgdb_debug_hook)(regs); \
-}
-#else
-#define CHK_REMOTE_DEBUG(regs)
-#endif
-
#ifdef CONFIG_CPU_SH2
# define TRAP_RESERVED_INST 4
# define TRAP_ILLEGAL_SLOT_INST 6
@@ -94,7 +83,6 @@ void die(const char * str, struct pt_regs * regs, long err)
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- CHK_REMOTE_DEBUG(regs);
print_modules();
show_regs(regs);
@@ -683,7 +671,6 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
error_code = lookup_exception_vector();
local_irq_enable();
- CHK_REMOTE_DEBUG(regs);
force_sig(SIGILL, tsk);
die_if_no_fixup("reserved instruction", regs, error_code);
}
@@ -761,7 +748,6 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
inst = lookup_exception_vector();
local_irq_enable();
- CHK_REMOTE_DEBUG(regs);
force_sig(SIGILL, tsk);
die_if_no_fixup("illegal slot instruction", regs, inst);
}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index e58726892b5f..31a33ebdef6f 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -20,7 +20,6 @@
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
-#include <asm/kgdb.h>
/*
* This routine handles page faults. It determines the address,
@@ -282,11 +281,6 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
if (notify_page_fault(regs, lookup_exception_vector()))
goto out;
-#ifdef CONFIG_SH_KGDB
- if (kgdb_nofault && kgdb_bus_err_hook)
- kgdb_bus_err_hook();
-#endif
-
ret = 1;
/*
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 08:11:56 +0000