diff options
Diffstat (limited to 'arch/x86')
76 files changed, 4572 insertions, 2721 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0d7cdbbfc1ee..44d4f2130d01 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1689,6 +1689,14 @@ config DMAR_FLOPPY_WA workaround will setup a 1:1 mapping for the first 16M to make floppy (an ISA device) work. +config INTR_REMAP + bool "Support for Interrupt Remapping (EXPERIMENTAL)" + depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL + help + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. + source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 60a85768cfcb..f8843c3ae77d 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -419,6 +419,60 @@ config X86_DEBUGCTLMSR def_bool y depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) +menuconfig PROCESSOR_SELECT + default y + bool "Supported processor vendors" if EMBEDDED + help + This lets you choose what x86 vendor support code your kernel + will include. + +config CPU_SUP_INTEL + default y + bool "Support Intel processors" if PROCESSOR_SELECT + help + This enables extended support for Intel processors + +config CPU_SUP_CYRIX_32 + default y + bool "Support Cyrix processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables extended support for Cyrix processors + +config CPU_SUP_AMD + default y + bool "Support AMD processors" if PROCESSOR_SELECT + help + This enables extended support for AMD processors + +config CPU_SUP_CENTAUR_32 + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables extended support for Centaur processors + +config CPU_SUP_CENTAUR_64 + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + depends on 64BIT + help + This enables extended support for Centaur processors + +config CPU_SUP_TRANSMETA_32 + default y + bool "Support Transmeta processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables extended support for Transmeta processors + +config CPU_SUP_UMC_32 + default y + bool "Support UMC processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables extended support for UMC processors + config X86_DS bool "Debug Store support" default y diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 75298fe2edca..6ec6bb6e9957 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -59,17 +59,18 @@ int validate_cpu(void) u32 e = err_flags[i]; for (j = 0; j < 32; j++) { - int n = (i << 5)+j; - if (*msg_strs < n) { + if (msg_strs[0] < i || + (msg_strs[0] == i && msg_strs[1] < j)) { /* Skip to the next string */ - do { - msg_strs++; - } while (*msg_strs); - msg_strs++; + msg_strs += 2; + while (*msg_strs++) + ; } if (e & 1) { - if (*msg_strs == n && msg_strs[1]) - printf("%s ", msg_strs+1); + if (msg_strs[0] == i && + msg_strs[1] == j && + msg_strs[2]) + printf("%s ", msg_strs+2); else printf("%d:%d ", i, j); } diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c index bbe76953bae9..8ef60f20b371 100644 --- a/arch/x86/boot/mkcpustr.c +++ b/arch/x86/boot/mkcpustr.c @@ -15,33 +15,33 @@ #include <stdio.h> -#include "../kernel/cpu/feature_names.c" - -#if NCAPFLAGS > 8 -# error "Need to adjust the boot code handling of CPUID strings" -#endif +#include "../kernel/cpu/capflags.c" int main(void) { - int i; + int i, j; const char *str; printf("static const char x86_cap_strs[] = \n"); - for (i = 0; i < NCAPINTS*32; i++) { - str = x86_cap_flags[i]; - - if (i == NCAPINTS*32-1) { - /* The last entry must be unconditional; this - also consumes the compiler-added null character */ - if (!str) - str = ""; - printf("\t\"\\x%02x\"\"%s\"\n", i, str); - } else if (str) { - printf("#if REQUIRED_MASK%d & (1 << %d)\n" - "\t\"\\x%02x\"\"%s\\0\"\n" - "#endif\n", - i >> 5, i & 31, i, str); + for (i = 0; i < NCAPINTS; i++) { + for (j = 0; j < 32; j++) { + str = x86_cap_flags[i*32+j]; + + if (i == NCAPINTS-1 && j == 31) { + /* The last entry must be unconditional; this + also consumes the compiler-added null + character */ + if (!str) + str = ""; + printf("\t\"\\x%02x\\x%02x\"\"%s\"\n", + i, j, str); + } else if (str) { + printf("#if REQUIRED_MASK%d & (1 << %d)\n" + "\t\"\\x%02x\\x%02x\"\"%s\\0\"\n" + "#endif\n", + i, j, i, j, str); + } } } printf("\t;\n"); diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index f1a2ac777faf..8d64c1bc8474 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -179,9 +179,10 @@ struct sigframe u32 pretcode; int sig; struct sigcontext_ia32 sc; - struct _fpstate_ia32 fpstate; + struct _fpstate_ia32 fpstate_unused; /* look at kernel/sigframe.h */ unsigned int extramask[_COMPAT_NSIG_WORDS-1]; char retcode[8]; + /* fp state follows here */ }; struct rt_sigframe @@ -192,8 +193,8 @@ struct rt_sigframe u32 puc; compat_siginfo_t info; struct ucontext_ia32 uc; - struct _fpstate_ia32 fpstate; char retcode[8]; + /* fp state follows here */ }; #define COPY(x) { \ @@ -215,7 +216,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, unsigned int *peax) { unsigned int tmpflags, gs, oldgs, err = 0; - struct _fpstate_ia32 __user *buf; + void __user *buf; u32 tmp; /* Always make any pending restarted system calls return -EINTR */ @@ -259,26 +260,12 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, err |= __get_user(tmp, &sc->fpstate); buf = compat_ptr(tmp); - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387_ia32(buf); - } else { - struct task_struct *me = current; - - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } + err |= restore_i387_xstate_ia32(buf); err |= __get_user(tmp, &sc->ax); *peax = tmp; return err; - -badframe: - return 1; } asmlinkage long sys32_sigreturn(struct pt_regs *regs) @@ -350,7 +337,7 @@ badframe: */ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, - struct _fpstate_ia32 __user *fpstate, + void __user *fpstate, struct pt_regs *regs, unsigned int mask) { int tmp, err = 0; @@ -380,7 +367,7 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, err |= __put_user((u32)regs->flags, &sc->flags); err |= __put_user((u32)regs->sp, &sc->sp_at_signal); - tmp = save_i387_ia32(fpstate); + tmp = save_i387_xstate_ia32(fpstate); if (tmp < 0) err = -EFAULT; else { @@ -401,7 +388,8 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, * Determine which stack to use.. */ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, - size_t frame_size) + size_t frame_size, + void **fpstate) { unsigned long sp; @@ -420,6 +408,11 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, ka->sa.sa_restorer) sp = (unsigned long) ka->sa.sa_restorer; + if (used_math()) { + sp = sp - sig_xstate_ia32_size; + *fpstate = (struct _fpstate_ia32 *) sp; + } + sp -= frame_size; /* Align the stack pointer according to the i386 ABI, * i.e. so that on function entry ((sp + 4) & 15) == 0. */ @@ -433,6 +426,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, struct sigframe __user *frame; void __user *restorer; int err = 0; + void __user *fpstate = NULL; /* copy_to_user optimizes that into a single 8 byte store */ static const struct { @@ -447,7 +441,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, 0, }; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; @@ -456,8 +450,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, if (err) goto give_sigsegv; - err |= ia32_setup_sigcontext(&frame->sc, &frame->fpstate, regs, - set->sig[0]); + err |= ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]); if (err) goto give_sigsegv; @@ -521,6 +514,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, struct rt_sigframe __user *frame; void __user *restorer; int err = 0; + void __user *fpstate = NULL; /* __copy_to_user optimizes that into a single 8 byte store */ static const struct { @@ -536,7 +530,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, 0, }; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; @@ -549,13 +543,16 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + if (cpu_has_xsave) + err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); + else + err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate, + err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate, regs, set->sig[0]); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 3db651fc8ec5..c9be69fedb70 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -38,7 +38,7 @@ obj-y += tsc.o io_delay.o rtc.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o -obj-y += i387.o +obj-y += i387.o xsave.o obj-y += ptrace.o obj-y += ds.o obj-$(CONFIG_X86_32) += tls.o @@ -69,6 +69,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o +obj-$(CONFIG_X86_ES7000) += es7000_32.o obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o obj-y += vsmp_64.o obj-$(CONFIG_KPROBES) += kprobes.o @@ -104,6 +105,8 @@ obj-$(CONFIG_OLPC) += olpc.o ifeq ($(CONFIG_X86_64),y) obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o obj-y += bios_uv.o + obj-y += genx2apic_cluster.o + obj-y += genx2apic_phys.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 7d40ef7b36e3..c2ac1b4515a0 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -252,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) return; } -#ifdef CONFIG_X86_32 if (boot_cpu_physical_apicid != -1U) ver = apic_version[boot_cpu_physical_apicid]; -#endif generic_processor_info(id, ver); } @@ -774,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address) set_fixmap_nocache(FIX_APIC_BASE, address); if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); -#ifdef CONFIG_X86_32 + boot_cpu_physical_apicid = read_apic_id(); apic_version[boot_cpu_physical_apicid] = GET_APIC_VERSION(apic_read(APIC_LVR)); -#endif } } @@ -1350,7 +1346,9 @@ static void __init acpi_process_madt(void) acpi_ioapic = 1; smp_found_config = 1; +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif } } if (error == -EINVAL) { diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index f88bd0d982b0..a91c57cb666a 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -60,10 +60,8 @@ unsigned long mp_lapic_addr; static int force_enable_local_apic; int disable_apic; -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int local_apic_timer_disabled; +static int disable_apic_timer __cpuinitdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -130,7 +128,11 @@ static inline int lapic_get_version(void) */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 + return 1; +#else return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -145,13 +147,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -167,16 +174,48 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ void __cpuinit enable_NMI_through_LVT0(void) { - unsigned int v = APIC_DM_NMI; + unsigned int v; - /* Level triggered for 82489DX */ + /* unmask and set to NMI */ + v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -193,9 +232,13 @@ int get_physical_broadcast(void) */ int lapic_get_maxlvt(void) { - unsigned int v = apic_read(APIC_LVR); + unsigned int v; - /* 82489DXs do not report # of LVT entries. */ + v = apic_read(APIC_LVR); + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } @@ -203,8 +246,12 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* Clock divisor is set to 16 */ +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else #define APIC_DIVISOR 16 +#endif /* * This function sets up the local APIC timer, with a timeout of @@ -212,6 +259,9 @@ int lapic_get_maxlvt(void) * this function twice on the boot CPU, once with a bogus timeout * value, second time for real. The other (noncalibrating) CPUs * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. */ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { @@ -233,14 +283,44 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) */ tmp_value = apic_read(APIC_TDCR); apic_write(APIC_TDCR, - (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | - APIC_TDR_DIV_16); + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; +} + +/* * Program the next event, relative to now */ static int lapic_next_event(unsigned long delta, @@ -259,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) return; local_irq_save(flags); @@ -473,7 +553,7 @@ static int __init calibrate_APIC_clock(void) return -1; } - local_apic_timer_verify_ok = 1; + levt->features &= ~CLOCK_EVT_FEAT_DUMMY; /* We trust the pm timer based calibration */ if (!pm_referenced) { @@ -507,11 +587,11 @@ static int __init calibrate_APIC_clock(void) if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); else - local_apic_timer_verify_ok = 0; + levt->features |= CLOCK_EVT_FEAT_DUMMY; } else local_irq_enable(); - if (!local_apic_timer_verify_ok) { + if (levt->features & CLOCK_EVT_FEAT_DUMMY) { printk(KERN_WARNING "APIC timer disabled due to verification failure.\n"); return -1; @@ -533,7 +613,8 @@ void __init setup_boot_APIC_clock(void) * timer as a dummy clock event source on SMP systems, so the * broadcast mechanism is used. On UP systems simply ignore it. */ - if (local_apic_timer_disabled) { + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); /* No broadcast on UP ! */ if (num_possible_cpus() > 1) { lapic_clockevent.mult = 1; @@ -602,7 +683,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 + add_pda(apic_timer_irqs, 1); +#else per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -642,35 +727,6 @@ int setup_profiling_timer(unsigned int multiplier) } /* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* * Local APIC start and shutdown */ @@ -715,7 +771,7 @@ void clear_local_APIC(void) } /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); @@ -732,10 +788,6 @@ void clear_local_APIC(void) if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif /* Integrated APIC (!82489DX) ? */ if (lapic_is_integrated()) { if (maxlvt > 3) @@ -750,7 +802,7 @@ void clear_local_APIC(void) */ void disable_local_APIC(void) { - unsigned long value; + unsigned int value; clear_local_APIC(); @@ -762,6 +814,7 @@ void disable_local_APIC(void) value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); +#ifdef CONFIG_X86_32 /* * When LAPIC was disabled by the BIOS and enabled by the kernel, * restore the disabled state. @@ -773,6 +826,7 @@ void disable_local_APIC(void) l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } +#endif } /* @@ -789,11 +843,15 @@ void lapic_shutdown(void) return; local_irq_save(flags); - clear_local_APIC(); - if (enabled_via_apicbase) +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif disable_local_APIC(); + local_irq_restore(flags); } @@ -838,6 +896,12 @@ int __init verify_local_APIC(void) */ reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; /* * The next two are just to see if we have sane values. @@ -863,14 +927,15 @@ void __init sync_Arb_IDs(void) */ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; + /* * Wait for idle. */ apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, - APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -878,7 +943,7 @@ void __init sync_Arb_IDs(void) */ void __init init_bsp_APIC(void) { - unsigned long value; + unsigned int value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -899,11 +964,13 @@ void __init init_bsp_APIC(void) value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; +#ifdef CONFIG_X86_32 /* This bit is reserved on P4/Xeon and should be cleared */ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else +#endif value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -922,6 +989,16 @@ static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } /* !82489DX */ maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ @@ -942,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceable is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX.\n"); } } @@ -1089,13 +1157,17 @@ void __cpuinit setup_local_APIC(void) void __cpuinit end_local_APIC_setup(void) { - unsigned long value; - lapic_setup_esr(); - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, value); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif setup_apic_nmi_watchdog(NULL); apic_pm_activate(); @@ -1205,7 +1277,7 @@ void __init init_apic_mappings(void) * default configuration (or the MP table is broken). */ if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } @@ -1242,7 +1314,7 @@ int __init APIC_init_uniprocessor(void) * might be zero if read from MP tables. Get it from LAPIC. */ #ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); #endif physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); @@ -1321,59 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs) irq_exit(); } -#ifdef CONFIG_SMP -void __init smp_intr_init(void) -{ - /* - * IRQ0 must be given a fixed assignment and initialized, - * because it's used before the IO-APIC is set up. - */ - set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); - - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPI for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for single call function */ - set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); -} -#endif - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - /** * connect_bsp_APIC - attach the APIC to the interrupt system */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Do not trust the local APIC being empty at bootup. @@ -1388,6 +1413,7 @@ void __init connect_bsp_APIC(void) outb(0x70, 0x22); outb(0x01, 0x23); } +#endif enable_apic_mode(); } @@ -1400,6 +1426,9 @@ void __init connect_bsp_APIC(void) */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Put the board back into PIC mode (has an effect only on @@ -1411,54 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup) "entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + return; + } +#endif - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); + /* Go back to Virtual Wire compatibility mode */ - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + if (!virt_wire_setup) { /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled + * For LVT0 make it edge triggered, active high, + * external and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } + + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); } void __cpuinit generic_processor_info(int apicid, int version) { int cpu; cpumask_t tmp_map; - physid_mask_t phys_cpu; /* * Validate version @@ -1471,9 +1499,6 @@ void __cpuinit generic_processor_info(int apicid, int version) } apic_version[apicid] = version; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); @@ -1484,17 +1509,19 @@ void __cpuinit generic_processor_info(int apicid, int version) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if (apicid == boot_cpu_physical_apicid) + physid_set(apicid, phys_cpu_present_map); + if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ cpu = 0; - + } if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 /* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc @@ -1514,7 +1541,9 @@ void __cpuinit generic_processor_info(int apicid, int version) def_to_bigsmp = 1; } } -#ifdef CONFIG_SMP +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1527,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } #endif + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } @@ -1537,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version) #ifdef CONFIG_PM static struct { + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1577,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif @@ -1601,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); @@ -1620,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1634,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } @@ -1690,20 +1734,20 @@ static int __init parse_lapic(char *arg) } early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } -early_param("nolapic", parse_nolapic); +early_param("disableapic", setup_disableapic); -static int __init parse_disable_lapic_timer(char *arg) +/* same as disableapic, for compatibility */ +static int __init setup_nolapic(char *arg) { - local_apic_timer_disabled = 1; - return 0; + return setup_disableapic(arg); } -early_param("nolapic_timer", parse_disable_lapic_timer); +early_param("nolapic", setup_nolapic); static int __init parse_lapic_timer_c2_ok(char *arg) { @@ -1712,15 +1756,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); +static int __init parse_disable_apic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); + static int __init apic_set_verbosity(char *arg) { - if (!arg) + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif return -EINVAL; + } - if (strcmp(arg, "debug") == 0) + if (strcmp("debug", arg) == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp(arg, "verbose") == 0) + else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } return 0; } diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 446c062e831c..53898b65a6ae 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -27,6 +27,7 @@ #include <linux/clockchips.h> #include <linux/acpi_pmtmr.h> #include <linux/module.h> +#include <linux/dmar.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -39,13 +40,20 @@ #include <asm/proto.h> #include <asm/timex.h> #include <asm/apic.h> +#include <asm/i8259.h> #include <mach_ipi.h> #include <mach_apic.h> +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; +int disable_x2apic; +int x2apic; + +/* x2apic enabled before OS handover */ +int x2apic_preenabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; @@ -73,6 +81,9 @@ static void lapic_timer_setup(enum clock_event_mode mode, static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ static struct clock_event_device lapic_clockevent = { .name = "lapic", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT @@ -99,11 +110,15 @@ static inline int lapic_get_version(void) } /* - * Check, if the APIC is integrated or a seperate chip + * Check, if the APIC is integrated or a separate chip */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 return 1; +#else + return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -118,13 +133,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -140,6 +160,68 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + +static void x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return; +} + +static u32 safe_x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return 0; +} + +void x2apic_icr_write(u32 low, u32 id) +{ + wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); +} + +u64 x2apic_icr_read(void) +{ + unsigned long val; + + rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); + return val; +} + +static struct apic_ops x2apic_ops = { + .read = native_apic_msr_read, + .write = native_apic_msr_write, + .icr_read = x2apic_icr_read, + .icr_write = x2apic_icr_write, + .wait_icr_idle = x2apic_wait_icr_idle, + .safe_wait_icr_idle = safe_x2apic_wait_icr_idle, +}; + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ @@ -149,6 +231,11 @@ void __cpuinit enable_NMI_through_LVT0(void) /* unmask and set to NMI */ v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -157,14 +244,28 @@ void __cpuinit enable_NMI_through_LVT0(void) */ int lapic_get_maxlvt(void) { - unsigned int v, maxlvt; + unsigned int v; v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } /* + * Local APIC timer + */ + +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else +#define APIC_DIVISOR 16 +#endif + +/* * This function sets up the local APIC timer, with a timeout of * 'clocks' APIC bus clock. During calibration we actually call * this function twice on the boot CPU, once with a bogus timeout @@ -174,7 +275,6 @@ int lapic_get_maxlvt(void) * We do reads before writes even if unnecessary, to get around the * P5 APIC double write bug. */ - static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; @@ -182,6 +282,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) lvtt_value = LOCAL_TIMER_VECTOR; if (!oneshot) lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + if (!irqen) lvtt_value |= APIC_LVT_MASKED; @@ -191,12 +294,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write(APIC_TMICT, clocks); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* @@ -366,7 +469,7 @@ static int __init calibrate_APIC_clock(void) lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - calibration_result = result / HZ; + calibration_result = (result * APIC_DIVISOR) / HZ; /* * Do a sanity check on the APIC calibration result @@ -388,10 +491,10 @@ static int __init calibrate_APIC_clock(void) void __init setup_boot_APIC_clock(void) { /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); @@ -403,7 +506,9 @@ void __init setup_boot_APIC_clock(void) return; } - printk(KERN_INFO "Using local APIC timer interrupts.\n"); + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + if (calibrate_APIC_clock()) { /* No broadcast on UP ! */ if (num_possible_cpus() > 1) @@ -422,6 +527,7 @@ void __init setup_boot_APIC_clock(void) printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } @@ -460,7 +566,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 add_pda(apic_timer_irqs, 1); +#else + per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -491,6 +601,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_enter(); local_apic_timer_interrupt(); irq_exit(); + set_irq_regs(old_regs); } @@ -544,6 +655,13 @@ void clear_local_APIC(void) apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } + /* lets not touch this if we didn't frob it */ +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif /* * Clean APIC state for other OSs: */ @@ -554,8 +672,14 @@ void clear_local_APIC(void) apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); + + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } } /** @@ -574,8 +698,28 @@ void disable_local_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); + +#ifdef CONFIG_X86_32 + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } +#endif } +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ void lapic_shutdown(void) { unsigned long flags; @@ -585,7 +729,13 @@ void lapic_shutdown(void) local_irq_save(flags); - disable_local_APIC(); +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif + disable_local_APIC(); + local_irq_restore(flags); } @@ -629,10 +779,10 @@ int __init verify_local_APIC(void) /* * The ID register is read/write in a real APIC. */ - reg0 = read_apic_id(); + reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = read_apic_id(); + reg1 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); apic_write(APIC_ID, reg0); if (reg1 != (reg0 ^ APIC_ID_MASK)) @@ -656,8 +806,11 @@ int __init verify_local_APIC(void) */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - if (modern_apic()) + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; /* @@ -666,8 +819,8 @@ void __init sync_Arb_IDs(void) apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -684,8 +837,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - /* * Do not trust the local APIC being empty at bootup. */ @@ -697,7 +848,15 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; + +#ifdef CONFIG_X86_32 + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else +#endif + value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -706,9 +865,50 @@ void __init init_bsp_APIC(void) */ apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); } +static void __cpuinit lapic_setup_esr(void) +{ + unsigned long oldvalue, value, maxlvt; + if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } + /* !82489DX */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + printk(KERN_INFO "No ESR for 82489DX.\n"); + } +} + + /** * setup_local_APIC - setup the local APIC */ @@ -814,25 +1014,143 @@ void __cpuinit setup_local_APIC(void) preempt_enable(); } -static void __cpuinit lapic_setup_esr(void) -{ - unsigned maxlvt = lapic_get_maxlvt(); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); -} - void __cpuinit end_local_APIC_setup(void) { lapic_setup_esr(); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } +void check_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + + if (msr & X2APIC_ENABLE) { + printk("x2apic enabled by BIOS, switching to x2apic ops\n"); + x2apic_preenabled = x2apic = 1; + apic_ops = &x2apic_ops; + } +} + +void enable_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + if (!(msr & X2APIC_ENABLE)) { + printk("Enabling x2apic\n"); + wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); + } +} + +void enable_IR_x2apic(void) +{ +#ifdef CONFIG_INTR_REMAP + int ret; + unsigned long flags; + + if (!cpu_has_x2apic) + return; + + if (!x2apic_preenabled && disable_x2apic) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of nox2apic\n"); + return; + } + + if (x2apic_preenabled && disable_x2apic) + panic("Bios already enabled x2apic, can't enforce nox2apic"); + + if (!x2apic_preenabled && skip_ioapic_setup) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of skipping io-apic setup\n"); + return; + } + + ret = dmar_table_init(); + if (ret) { + printk(KERN_INFO + "dmar_table_init() failed with %d:\n", ret); + + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else + printk(KERN_INFO + "Not enabling x2apic,Intr-remapping\n"); + return; + } + + local_irq_save(flags); + mask_8259A(); + save_mask_IO_APIC_setup(); + + ret = enable_intr_remapping(1); + + if (ret && x2apic_preenabled) { + local_irq_restore(flags); + panic("x2apic enabled by bios. But IR enabling failed"); + } + + if (ret) + goto end; + + if (!x2apic) { + x2apic = 1; + apic_ops = &x2apic_ops; + enable_x2apic(); + } +end: + if (ret) + /* + * IR enabling failed + */ + restore_IO_APIC_setup(); + else + reinit_intr_remapped_IO_APIC(x2apic_preenabled); + + unmask_8259A(); + local_irq_restore(flags); + + if (!ret) { + if (!x2apic_preenabled) + printk(KERN_INFO + "Enabled x2apic and interrupt-remapping\n"); + else + printk(KERN_INFO + "Enabled Interrupt-remapping\n"); + } else + printk(KERN_ERR + "Failed to enable Interrupt-remapping and x2apic\n"); +#else + if (!cpu_has_x2apic) + return; + + if (x2apic_preenabled) + panic("x2apic enabled prior OS handover," + " enable CONFIG_INTR_REMAP"); + + printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping " + " and x2apic\n"); +#endif + + return; +} + /* * Detect and enable local APICs on non-SMP boards. * Original code written by Keir Fraser. @@ -872,7 +1190,7 @@ void __init early_init_lapic_mapping(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /** @@ -880,6 +1198,11 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + if (x2apic) { + boot_cpu_physical_apicid = read_apic_id(); + return; + } + /* * If no local APIC can be found then set up a fake all * zeroes page to simulate the local APIC and another @@ -899,13 +1222,15 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ +int apic_version[MAX_APICS]; + int __init APIC_init_uniprocessor(void) { if (disable_apic) { @@ -918,6 +1243,9 @@ int __init APIC_init_uniprocessor(void) return -1; } + enable_IR_x2apic(); + setup_apic_routing(); + verify_local_APIC(); connect_bsp_APIC(); @@ -1004,17 +1332,57 @@ asmlinkage void smp_error_interrupt(void) } /** - * * connect_bsp_APIC - attach the APIC to the interrupt system - * */ + * connect_bsp_APIC - attach the APIC to the interrupt system + */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); + } +#endif enable_apic_mode(); } +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + return; + } +#endif + /* Go back to Virtual Wire compatibility mode */ - unsigned long value; /* For the spurious interrupt use vector F, and enable it */ value = apic_read(APIC_SPIV); @@ -1040,7 +1408,10 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_LVT0, APIC_LVT_MASKED); } - /* For LVT1 make it edge triggered, active high, nmi and enabled */ + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ value = apic_read(APIC_LVT1); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | @@ -1055,9 +1426,20 @@ void __cpuinit generic_processor_info(int apicid, int version) int cpu; cpumask_t tmp_map; + /* + * Validate version + */ + if (version == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); + version = 0x10; + } + apic_version[apicid] = version; + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); + " Processor ignored.\n", NR_CPUS); return; } @@ -1077,6 +1459,29 @@ void __cpuinit generic_processor_info(int apicid, int version) if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj <ashok.raj@intel.com> + */ + if (max_physical_apicid >= 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1088,20 +1493,28 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_cpu_to_apicid, cpu) = apicid; per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } +#endif cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } +int hard_smp_processor_id(void) +{ + return read_apic_id(); +} + /* * Power management */ #ifdef CONFIG_PM static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1129,7 +1542,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) maxlvt = lapic_get_maxlvt(); - apic_pm_state.apic_id = read_apic_id(); + apic_pm_state.apic_id = apic_read(APIC_ID); apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); apic_pm_state.apic_ldr = apic_read(APIC_LDR); apic_pm_state.apic_dfr = apic_read(APIC_DFR); @@ -1142,10 +1555,11 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); @@ -1164,10 +1578,25 @@ static int lapic_resume(struct sys_device *dev) maxlvt = lapic_get_maxlvt(); local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); apic_write(APIC_DFR, apic_pm_state.apic_dfr); @@ -1176,7 +1605,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1190,10 +1619,17 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + static struct sysdev_class lapic_sysclass = { .name = "lapic", .resume = lapic_resume, @@ -1307,31 +1743,19 @@ __cpuinit int apic_is_clustered_box(void) return (clusters > 2); } -/* - * APIC command line parameters - */ -static int __init apic_set_verbosity(char *str) +static __init int setup_nox2apic(char *str) { - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - + disable_x2apic = 1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC); return 0; } -early_param("apic", apic_set_verbosity); +early_param("nox2apic", setup_nox2apic); + -static __init int setup_disableapic(char *str) +/* + * APIC command line parameters + */ +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); @@ -1340,9 +1764,9 @@ static __init int setup_disableapic(char *str) early_param("disableapic", setup_disableapic); /* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) +static int __init setup_nolapic(char *arg) { - return setup_disableapic(str); + return setup_disableapic(arg); } early_param("nolapic", setup_nolapic); @@ -1353,14 +1777,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static __init int setup_noapictimer(char *str) +static int __init parse_disable_apic_timer(char *arg) { - if (str[0] != ' ' && str[0] != 0) - return 0; disable_apic_timer = 1; - return 1; + return 0; } -__setup("noapictimer", setup_noapictimer); +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); static __init int setup_apicpmtimer(char *s) { @@ -1370,6 +1799,31 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); +static int __init apic_set_verbosity(char *arg) +{ + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", arg) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + static int __init lapic_insert_resource(void) { if (!apic_phys) diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ee76eaad3001..7f0b45a5d788 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -3,22 +3,30 @@ # obj-y := intel_cacheinfo.o addon_cpuid_features.o -obj-y += proc.o feature_names.o - -obj-$(CONFIG_X86_32) += common.o bugs.o -obj-$(CONFIG_X86_64) += common_64.o bugs_64.o -obj-$(CONFIG_X86_32) += amd.o -obj-$(CONFIG_X86_64) += amd_64.o -obj-$(CONFIG_X86_32) += cyrix.o -obj-$(CONFIG_X86_32) += centaur.o -obj-$(CONFIG_X86_64) += centaur_64.o -obj-$(CONFIG_X86_32) += transmeta.o -obj-$(CONFIG_X86_32) += intel.o -obj-$(CONFIG_X86_64) += intel_64.o -obj-$(CONFIG_X86_32) += umc.o +obj-y += proc.o capflags.o powerflags.o common.o + +obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o +obj-$(CONFIG_X86_64) += bugs_64.o + +obj-$(CONFIG_CPU_SUP_INTEL) += intel.o +obj-$(CONFIG_CPU_SUP_AMD) += amd.o +obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o +obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o +obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o +obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o +obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o + +quiet_cmd_mkcapflags = MKCAP $@ + cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@ + +cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h + +targets += capflags.c +$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE + $(call if_changed,mkcapflags) diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index a6ef672adbba..0d9c993aa93e 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -7,6 +7,8 @@ #include <asm/pat.h> #include <asm/processor.h> +#include <mach_apic.h> + struct cpuid_bit { u16 feature; u8 reg; @@ -48,6 +50,92 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) } } +/* leaf 0xb SMT level */ +#define SMT_LEVEL 0 + +/* leaf 0xb sub-leaf types */ +#define INVALID_TYPE 0 +#define SMT_TYPE 1 +#define CORE_TYPE 2 + +#define LEAFB_SUBTYPE(ecx) (((ecx) >> 8) & 0xff) +#define BITS_SHIFT_NEXT_LEVEL(eax) ((eax) & 0x1f) +#define LEVEL_MAX_SIBLINGS(ebx) ((ebx) & 0xffff) + +/* + * Check for extended topology enumeration cpuid leaf 0xb and if it + * exists, use it for populating initial_apicid and cpu topology + * detection. + */ +void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned int eax, ebx, ecx, edx, sub_index; + unsigned int ht_mask_width, core_plus_mask_width; + unsigned int core_select_mask, core_level_siblings; + + if (c->cpuid_level < 0xb) + return; + + cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx); + + /* + * check if the cpuid leaf 0xb is actually implemented. + */ + if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE)) + return; + + set_cpu_cap(c, X86_FEATURE_XTOPOLOGY); + + /* + * initial apic id, which also represents 32-bit extended x2apic id. + */ + c->initial_apicid = edx; + + /* + * Populate HT related information from sub-leaf level 0. + */ + core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + + sub_index = 1; + do { + cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx); + + /* + * Check for the Core type in the implemented sub leaves. + */ + if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) { + core_level_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + break; + } + + sub_index++; + } while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE); + + core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width; + +#ifdef CONFIG_X86_32 + c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width) + & core_select_mask; + c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width); +#else + c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask; + c->phys_proc_id = phys_pkg_id(core_plus_mask_width); +#endif + c->x86_max_cores = (core_level_siblings / smp_num_siblings); + + + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + return; +#endif +} + #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 18514ed26104..32e73520adf7 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1,13 +1,22 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/mm.h> + #include <asm/io.h> #include <asm/processor.h> #include <asm/apic.h> +#ifdef CONFIG_X86_64 +# include <asm/numa_64.h> +# include <asm/mmconfig.h> +# include <asm/cacheflush.h> +#endif + #include <mach_apic.h> + #include "cpu.h" +#ifdef CONFIG_X86_32 /* * B step AMD K6 before B 9730xxxx have hardware bugs that can cause * misexecution of code under Linux. Owners of such processors should @@ -24,26 +33,273 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c) { - if (cpuid_eax(0x80000000) >= 0x80000007) { - c->x86_power = cpuid_edx(0x80000007); - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +/* + * General Systems BIOSen alias the cpu frequency registers + * of the Elan at 0x000df000. Unfortuantly, one of the Linux + * drivers subsequently pokes it, and changes the CPU speed. + * Workaround : Remove the unneeded alias. + */ +#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ +#define CBAR_ENB (0x80000000) +#define CBAR_KEY (0X000000CB) + if (c->x86_model == 9 || c->x86_model == 10) { + if (inl (CBAR) & CBAR_ENB) + outl (0 | CBAR_KEY, CBAR); } - - /* Set MTRR capability flag if appropriate */ - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); } -static void __cpuinit init_amd(struct cpuinfo_x86 *c) + +static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) { u32 l, h; int mbytes = num_physpages >> (20-PAGE_SHIFT); - int r; + if (c->x86_model < 6) { + /* Based on AMD doc 20734R - June 2000 */ + if (c->x86_model == 0) { + clear_cpu_cap(c, X86_FEATURE_APIC); + set_cpu_cap(c, X86_FEATURE_PGE); + } + return; + } + + if (c->x86_model == 6 && c->x86_mask == 1) { + const int K6_BUG_LOOP = 1000000; + int n; + void (*f_vide)(void); + unsigned long d, d2; + + printk(KERN_INFO "AMD K6 stepping B detected - "); + + /* + * It looks like AMD fixed the 2.6.2 bug and improved indirect + * calls at the same time. + */ + + n = K6_BUG_LOOP; + f_vide = vide; + rdtscl(d); + while (n--) + f_vide(); + rdtscl(d2); + d = d2-d; + + if (d > 20*K6_BUG_LOOP) + printk("system stability may be impaired when more than 32 MB are used.\n"); + else + printk("probably OK (after B9730xxxx).\n"); + printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); + } + + /* K6 with old style WHCR */ + if (c->x86_model < 8 || + (c->x86_model == 8 && c->x86_mask < 8)) { + /* We can only write allocate on the low 508Mb */ + if (mbytes > 508) + mbytes = 508; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0x0000FFFF) == 0) { + unsigned long flags; + l = (1<<0)|((mbytes/4)<<1); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", + mbytes); + } + return; + } + + if ((c->x86_model == 8 && c->x86_mask > 7) || + c->x86_model == 9 || c->x86_model == 13) { + /* The more serious chips .. */ + + if (mbytes > 4092) + mbytes = 4092; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0xFFFF0000) == 0) { + unsigned long flags; + l = ((mbytes>>2)<<22)|(1<<16); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", + mbytes); + } + + return; + } + + if (c->x86_model == 10) { + /* AMD Geode LX is model 10 */ + /* placeholder for any needed mods */ + return; + } +} + +static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) +{ + u32 l, h; + + /* + * Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. + * If the BIOS didn't enable it already, enable it here. + */ + if (c->x86_model >= 6 && c->x86_model <= 10) { + if (!cpu_has(c, X86_FEATURE_XMM)) { + printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); + rdmsr(MSR_K7_HWCR, l, h); + l &= ~0x00008000; + wrmsr(MSR_K7_HWCR, l, h); + set_cpu_cap(c, X86_FEATURE_XMM); + } + } + + /* + * It's been determined by AMD that Athlons since model 8 stepping 1 + * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx + * As per AMD technical note 27212 0.2 + */ + if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { + rdmsr(MSR_K7_CLK_CTL, l, h); + if ((l & 0xfff00000) != 0x20000000) { + printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, + ((l & 0x000fffff)|0x20000000)); + wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); + } + } + + set_cpu_cap(c, X86_FEATURE_K7); +} +#endif + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_HT + unsigned bits; + + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; +#endif +} + +static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) +{ +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + int cpu = smp_processor_id(); + int node; + unsigned apicid = hard_smp_processor_id(); + + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_HT + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSCALL32); +#else + /* Set MTRR capability flag if appropriate */ + if (c->x86 == 5) + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_cpu_cap(c, X86_FEATURE_K6_MTRR); +#endif +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ #ifdef CONFIG_SMP unsigned long long value; @@ -54,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * Errata 63 for SH-B3 steppings * Errata 122 for all steppings (F+ have it disabled by default) */ - if (c->x86 == 15) { + if (c->x86 == 0xf) { rdmsrl(MSR_K7_HWCR, value); value |= 1 << 6; wrmsrl(MSR_K7_HWCR, value); @@ -64,209 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) early_init_amd(c); /* - * FIXME: We should handle the K5 here. Set up the write - * range and also turn on MSR 83 bits 4 and 31 (write alloc, - * no bus pipeline) - */ - - /* * Bit 31 in normal CPUID used for nonstandard 3DNow ID; * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_cpu_cap(c, 0*32+31); - r = get_model_name(c); +#ifdef CONFIG_X86_64 + /* On C+ stepping K8 rep microcode works well for copy/memset */ + if (c->x86 == 0xf) { + u32 level; - switch (c->x86) { - case 4: - /* - * General Systems BIOSen alias the cpu frequency registers - * of the Elan at 0x000df000. Unfortuantly, one of the Linux - * drivers subsequently pokes it, and changes the CPU speed. - * Workaround : Remove the unneeded alias. - */ -#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ -#define CBAR_ENB (0x80000000) -#define CBAR_KEY (0X000000CB) - if (c->x86_model == 9 || c->x86_model == 10) { - if (inl (CBAR) & CBAR_ENB) - outl (0 | CBAR_KEY, CBAR); - } - break; - case 5: - if (c->x86_model < 6) { - /* Based on AMD doc 20734R - June 2000 */ - if (c->x86_model == 0) { - clear_cpu_cap(c, X86_FEATURE_APIC); - set_cpu_cap(c, X86_FEATURE_PGE); - } - break; - } - - if (c->x86_model == 6 && c->x86_mask == 1) { - const int K6_BUG_LOOP = 1000000; - int n; - void (*f_vide)(void); - unsigned long d, d2; - - printk(KERN_INFO "AMD K6 stepping B detected - "); - - /* - * It looks like AMD fixed the 2.6.2 bug and improved indirect - * calls at the same time. - */ - - n = K6_BUG_LOOP; - f_vide = vide; - rdtscl(d); - while (n--) - f_vide(); - rdtscl(d2); - d = d2-d; - - if (d > 20*K6_BUG_LOOP) - printk("system stability may be impaired when more than 32 MB are used.\n"); - else - printk("probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); - } - - /* K6 with old style WHCR */ - if (c->x86_model < 8 || - (c->x86_model == 8 && c->x86_mask < 8)) { - /* We can only write allocate on the low 508Mb */ - if (mbytes > 508) - mbytes = 508; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0x0000FFFF) == 0) { - unsigned long flags; - l = (1<<0)|((mbytes/4)<<1); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", - mbytes); - } - break; - } - - if ((c->x86_model == 8 && c->x86_mask > 7) || - c->x86_model == 9 || c->x86_model == 13) { - /* The more serious chips .. */ - - if (mbytes > 4092) - mbytes = 4092; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0xFFFF0000) == 0) { - unsigned long flags; - l = ((mbytes>>2)<<22)|(1<<16); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", - mbytes); - } - - break; - } - - if (c->x86_model == 10) { - /* AMD Geode LX is model 10 */ - /* placeholder for any needed mods */ - break; - } - break; - case 6: /* An Athlon/Duron */ - - /* - * Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. - * If the BIOS didn't enable it already, enable it here. - */ - if (c->x86_model >= 6 && c->x86_model <= 10) { - if (!cpu_has(c, X86_FEATURE_XMM)) { - printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); - rdmsr(MSR_K7_HWCR, l, h); - l &= ~0x00008000; - wrmsr(MSR_K7_HWCR, l, h); - set_cpu_cap(c, X86_FEATURE_XMM); - } - } - - /* - * It's been determined by AMD that Athlons since model 8 stepping 1 - * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx - * As per AMD technical note 27212 0.2 - */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { - rdmsr(MSR_K7_CLK_CTL, l, h); - if ((l & 0xfff00000) != 0x20000000) { - printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, - ((l & 0x000fffff)|0x20000000)); - wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); - } - } - break; + level = cpuid_eax(1); + if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); } + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else + + /* + * FIXME: We should handle the K5 here. Set up the write + * range and also turn on MSR 83 bits 4 and 31 (write alloc, + * no bus pipeline) + */ switch (c->x86) { - case 15: - /* Use K8 tuning for Fam10h and Fam11h */ - case 0x10: - case 0x11: - set_cpu_cap(c, X86_FEATURE_K8); + case 4: + init_amd_k5(c); break; - case 6: - set_cpu_cap(c, X86_FEATURE_K7); + case 5: + init_amd_k6(c); + break; + case 6: /* An Athlon/Duron */ + init_amd_k7(c); break; } + + /* K6s reports MCEs but don't actually have all the MSRs */ + if (c->x86 < 6) + clear_cpu_cap(c, X86_FEATURE_MCE); +#endif + + /* Enable workaround for FXSAVE leak */ if (c->x86 >= 6) set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - display_cacheinfo(c); - - if (cpuid_eax(0x80000000) >= 0x80000008) - c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (!c->x86_model_id[0]) { + switch (c->x86) { + case 0xf: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } -#ifdef CONFIG_X86_HT - /* - * On a AMD multi core setup the lower bits of the APIC id - * distinguish the cores. - */ - if (c->x86_max_cores > 1) { - int cpu = smp_processor_id(); - unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + display_cacheinfo(c); - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1); - c->phys_proc_id >>= bits; - printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_max_cores, c->cpu_core_id); + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) { + amd_detect_cmp(c); + srat_detect_node(c); } + +#ifdef CONFIG_X86_32 + detect_ht(c); #endif - if (cpuid_eax(0x80000000) >= 0x80000006) { - if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000)) + if (c->extended_cpuid_level >= 0x80000006) { + if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000)) num_cache_leaves = 4; else num_cache_leaves = 3; } - /* K6s reports MCEs but don't actually have all the MSRs */ - if (c->x86 < 6) - clear_cpu_cap(c, X86_FEATURE_MCE); + if (c->x86 >= 0xf && c->x86 <= 0x11) + set_cpu_cap(c, X86_FEATURE_K8); - if (cpu_has_xmm2) + if (cpu_has_xmm2) { + /* MFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + } + +#ifdef CONFIG_X86_64 + if (c->x86 == 0x10) { + /* do this for boot cpu */ + if (c == &boot_cpu_data) + check_enable_amd_mmconf_dmi(); + + fam10h_check_enable_mmcfg(); + } + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { + printk(KERN_DEBUG "tseg: %010llx\n", tseg); + if ((tseg>>PMD_SHIFT) < + (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || + ((tseg>>PMD_SHIFT) < + (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && + (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) + set_memory_4k((unsigned long)__va(tseg), 1); + } + } +#endif } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* AMD errata T13 (order #21922) */ @@ -279,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int } return size; } +#endif static struct cpu_dev amd_cpu_dev __cpuinitdata = { .c_vendor = "AMD", .c_ident = { "AuthenticAMD" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = { @@ -295,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = amd_size_cache, +#endif .c_early_init = early_init_amd, .c_init = init_amd, - .c_size_cache = amd_size_cache, + .c_x86_vendor = X86_VENDOR_AMD, }; -cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); +cpu_dev_register(amd_cpu_dev); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c deleted file mode 100644 index d1692b2a41ff..000000000000 --- a/arch/x86/kernel/cpu/amd_64.c +++ /dev/null @@ -1,224 +0,0 @@ -#include <linux/init.h> -#include <linux/mm.h> - -#include <asm/numa_64.h> -#include <asm/mmconfig.h> -#include <asm/cacheflush.h> - -#include <mach_apic.h> - -#include "cpu.h" - -int force_mwait __cpuinitdata; - -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - - set_cpu_cap(c, X86_FEATURE_SYSCALL32); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 0xf) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - if (c->x86 == 0xf) { - level = cpuid_eax(1); - if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 0xf: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 >= 0xf && c->x86 <= 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) { - /* do this for boot cpu */ - if (c == &boot_cpu_data) - check_enable_amd_mmconf_dmi(); - - fam10h_check_enable_mmcfg(); - } - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { - printk(KERN_DEBUG "tseg: %010llx\n", tseg); - if ((tseg>>PMD_SHIFT) < - (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || - ((tseg>>PMD_SHIFT) < - (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && - (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) - set_memory_4k((unsigned long)__va(tseg), 1); - } - } -} - -static struct cpu_dev amd_cpu_dev __cpuinitdata = { - .c_vendor = "AMD", - .c_ident = { "AuthenticAMD" }, - .c_early_init = early_init_amd, - .c_init = init_amd, -}; - -cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); - diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index a0534c04d38a..89bfdd9cacc6 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) if (c->x86_model >= 6 && c->x86_model < 9) set_cpu_cap(c, X86_FEATURE_3DNOW); - get_model_name(c); display_cacheinfo(c); } @@ -475,6 +474,7 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_early_init = early_init_centaur, .c_init = init_centaur, .c_size_cache = centaur_size_cache, + .c_x86_vendor = X86_VENDOR_CENTAUR, }; -cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); +cpu_dev_register(centaur_cpu_dev); diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c index 1d181c40e2e1..a1625f5a1e78 100644 --- a/arch/x86/kernel/cpu/centaur_64.c +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -16,9 +16,10 @@ static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { + early_init_centaur(c); + if (c->x86 == 0x6 && c->x86_model >= 0xf) { c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_REP_GOOD); } set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); @@ -29,7 +30,8 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_ident = { "CentaurHauls" }, .c_early_init = early_init_centaur, .c_init = init_centaur, + .c_x86_vendor = X86_VENDOR_CENTAUR, }; -cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); +cpu_dev_register(centaur_cpu_dev); diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/kernel/cpu/cmpxchg.c new file mode 100644 index 000000000000..2056ccf572cc --- /dev/null +++ b/arch/x86/kernel/cpu/cmpxchg.c @@ -0,0 +1,72 @@ +/* + * cmpxchg*() fallbacks for CPU not supporting these instructions + */ + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/module.h> + +#ifndef CONFIG_X86_CMPXCHG +unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) +{ + u8 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u8 *)ptr; + if (prev == old) + *(u8 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u8); + +unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) +{ + u16 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u16 *)ptr; + if (prev == old) + *(u16 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u16); + +unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) +{ + u32 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u32 *)ptr; + if (prev == old) + *(u32 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u32); +#endif + +#ifndef CONFIG_X86_CMPXCHG64 +unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) +{ + u64 prev; + unsigned long flags; + + /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u64 *)ptr; + if (prev == old) + *(u64 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_486_u64); +#endif + diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 4e456bd955bb..7581b62df184 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,28 +1,62 @@ #include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/kgdb.h> +#include <linux/topology.h> #include <linux/delay.h> #include <linux/smp.h> -#include <linux/module.h> #include <linux/percpu.h> -#include <linux/bootmem.h> -#include <asm/processor.h> #include <asm/i387.h> #include <asm/msr.h> #include <asm/io.h> +#include <asm/linkage.h> #include <asm/mmu_context.h> #include <asm/mtrr.h> #include <asm/mce.h> #include <asm/pat.h> #include <asm/asm.h> +#include <asm/numa.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> #include <asm/apic.h> #include <mach_apic.h> +#include <asm/genapic.h> #endif +#include <asm/pda.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/atomic.h> +#include <asm/proto.h> +#include <asm/sections.h> +#include <asm/setup.h> + #include "cpu.h" +static struct cpu_dev *this_cpu __cpuinitdata; + +#ifdef CONFIG_X86_64 +/* We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + */ +/* The TLS descriptors are currently at a different place compared to i386. + Hopefully nobody expects them at a fixed place (Wine?) */ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, + [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, +} }; +#else +DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, @@ -56,17 +90,150 @@ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, } }; +#endif EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - +#ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; -struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; +static int __init cachesize_setup(char *str) +{ + get_option(&str, &cachesize_override); + return 1; +} +__setup("cachesize=", cachesize_setup); + +static int __init x86_fxsr_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_FXSR); + setup_clear_cpu_cap(X86_FEATURE_XMM); + return 1; +} +__setup("nofxsr", x86_fxsr_setup); + +static int __init x86_sep_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_SEP); + return 1; +} +__setup("nosep", x86_sep_setup); + +/* Standard macro to see if a specific flag is changeable */ +static inline int flag_is_changeable_p(u32 flag) +{ + u32 f1, f2; + + asm("pushfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "movl %0,%1\n\t" + "xorl %2,%0\n\t" + "pushl %0\n\t" + "popfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "popfl\n\t" + : "=&r" (f1), "=&r" (f2) + : "ir" (flag)); + + return ((f1^f2) & flag) != 0; +} + +/* Probe for the CPUID instruction */ +static int __cpuinit have_cpuid_p(void) +{ + return flag_is_changeable_p(X86_EFLAGS_ID); +} + +static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { + /* Disable processor serial number */ + unsigned long lo, hi; + rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + lo |= 0x200000; + wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + printk(KERN_NOTICE "CPU serial number disabled.\n"); + clear_cpu_cap(c, X86_FEATURE_PN); + + /* Disabling the serial number may affect the cpuid level */ + c->cpuid_level = cpuid_eax(0); + } +} + +static int __init x86_serial_nr_setup(char *s) +{ + disable_x86_serial_nr = 0; + return 1; +} +__setup("serialnumber", x86_serial_nr_setup); +#else +static inline int flag_is_changeable_p(u32 flag) +{ + return 1; +} +/* Probe for the CPUID instruction */ +static inline int have_cpuid_p(void) +{ + return 1; +} +static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ +} +#endif + +/* + * Naming convention should be: <Name> [(<Codename>)] + * This table only is used unless init_<vendor>() below doesn't set it; + * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used + * + */ + +/* Look up CPU names by table lookup. */ +static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +{ + struct cpu_model_info *info; + + if (c->x86_model >= 16) + return NULL; /* Range check */ + + if (!this_cpu) + return NULL; + + info = this_cpu->c_models; + + while (info && info->family) { + if (info->family == c->x86) + return info->model_names[c->x86_model]; + info++; + } + return NULL; /* Not found */ +} + +__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct desc_ptr gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +#ifdef CONFIG_X86_32 + asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); +#endif +} + +static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; static void __cpuinit default_init(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_64 + display_cacheinfo(c); +#else /* Not much we can do here... */ /* Check if at least it has cpuid */ if (c->cpuid_level == -1) { @@ -76,28 +243,22 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c) else if (c->x86 == 3) strcpy(c->x86_model_id, "386"); } +#endif } static struct cpu_dev __cpuinitdata default_cpu = { .c_init = default_init, .c_vendor = "Unknown", + .c_x86_vendor = X86_VENDOR_UNKNOWN, }; -static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; -static int __init cachesize_setup(char *str) -{ - get_option(&str, &cachesize_override); - return 1; -} -__setup("cachesize=", cachesize_setup); - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) +static void __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; char *p, *q; - if (cpuid_eax(0x80000000) < 0x80000004) - return 0; + if (c->extended_cpuid_level < 0x80000004) + return; v = (unsigned int *) c->x86_model_id; cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); @@ -116,30 +277,34 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c) while (q <= &c->x86_model_id[48]) *q++ = '\0'; /* Zero-pad the rest */ } - - return 1; } - void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { - unsigned int n, dummy, ecx, edx, l2size; + unsigned int n, dummy, ebx, ecx, edx, l2size; - n = cpuid_eax(0x80000000); + n = c->extended_cpuid_level; if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); + cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24)+(edx>>24); + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size = (ecx>>24) + (edx>>24); +#ifdef CONFIG_X86_64 + /* On K8 L1 TLB is inclusive, so don't count it */ + c->x86_tlbsize = 0; +#endif } if (n < 0x80000006) /* Some chips just has a large L1. */ return; - ecx = cpuid_ecx(0x80000006); + cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); l2size = ecx >> 16; +#ifdef CONFIG_X86_64 + c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); +#else /* do processor-specific cache resizing */ if (this_cpu->c_size_cache) l2size = this_cpu->c_size_cache(c, l2size); @@ -150,116 +315,106 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) if (l2size == 0) return; /* Again, no L2 cache is possible */ +#endif c->x86_cache_size = l2size; printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - l2size, ecx & 0xFF); + l2size, ecx & 0xFF); } -/* - * Naming convention should be: <Name> [(<Codename>)] - * This table only is used unless init_<vendor>() below doesn't set it; - * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used - * - */ - -/* Look up CPU names by table lookup. */ -static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +void __cpuinit detect_ht(struct cpuinfo_x86 *c) { - struct cpu_model_info *info; +#ifdef CONFIG_X86_HT + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; - if (c->x86_model >= 16) - return NULL; /* Range check */ + if (!cpu_has(c, X86_FEATURE_HT)) + return; - if (!this_cpu) - return NULL; + if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) + goto out; - info = this_cpu->c_models; + if (cpu_has(c, X86_FEATURE_XTOPOLOGY)) + return; - while (info && info->family) { - if (info->family == c->x86) - return info->model_names[c->x86_model]; - info++; + cpuid(1, &eax, &ebx, &ecx, &edx); + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of siblings %d", + smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); +#ifdef CONFIG_X86_64 + c->phys_proc_id = phys_pkg_id(index_msb); +#else + c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); +#endif + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings); + + core_bits = get_count_order(c->x86_max_cores); + +#ifdef CONFIG_X86_64 + c->cpu_core_id = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); +#else + c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & + ((1 << core_bits) - 1); +#endif } - return NULL; /* Not found */ -} +out: + if ((c->x86_max_cores * smp_num_siblings) > 1) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + } +#endif +} -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; int i; static int printed; for (i = 0; i < X86_VENDOR_NUM; i++) { - if (cpu_devs[i]) { - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - c->x86_vendor = i; - if (!early) - this_cpu = cpu_devs[i]; - return; - } + if (!cpu_devs[i]) + break; + + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + this_cpu = cpu_devs[i]; + c->x86_vendor = this_cpu->c_x86_vendor; + return; } } + if (!printed) { printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v); printk(KERN_ERR "CPU: Your system may be unstable.\n"); } + c->x86_vendor = X86_VENDOR_UNKNOWN; this_cpu = &default_cpu; } - -static int __init x86_fxsr_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_FXSR); - setup_clear_cpu_cap(X86_FEATURE_XMM); - return 1; -} -__setup("nofxsr", x86_fxsr_setup); - - -static int __init x86_sep_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_SEP); - return 1; -} -__setup("nosep", x86_sep_setup); - - -/* Standard macro to see if a specific flag is changeable */ -static inline int flag_is_changeable_p(u32 flag) -{ - u32 f1, f2; - - asm("pushfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "movl %0,%1\n\t" - "xorl %2,%0\n\t" - "pushl %0\n\t" - "popfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "popfl\n\t" - : "=&r" (f1), "=&r" (f2) - : "ir" (flag)); - - return ((f1^f2) & flag) != 0; -} - - -/* Probe for the CPUID instruction */ -static int __cpuinit have_cpuid_p(void) -{ - return flag_is_changeable_p(X86_EFLAGS_ID); -} - -void __init cpu_detect(struct cpuinfo_x86 *c) +void __cpuinit cpu_detect(struct cpuinfo_x86 *c) { /* Get vendor name */ cpuid(0x00000000, (unsigned int *)&c->cpuid_level, @@ -268,50 +423,87 @@ void __init cpu_detect(struct cpuinfo_x86 *c) (unsigned int *)&c->x86_vendor_id[4]); c->x86 = 4; + /* Intel-defined flags: level 0x00000001 */ if (c->cpuid_level >= 0x00000001) { u32 junk, tfms, cap0, misc; cpuid(0x00000001, &tfms, &misc, &junk, &cap0); - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; + c->x86_model += ((tfms >> 16) & 0xf) << 4; if (cap0 & (1<<19)) { - c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; + c->x86_cache_alignment = c->x86_clflush_size; } } } -static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) + +static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) { u32 tfms, xlvl; - unsigned int ebx; + u32 ebx; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (have_cpuid_p()) { - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - } + /* Intel-defined flags: level 0x00000001 */ + if (c->cpuid_level >= 0x00000001) { + u32 capability, excap; + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); + c->x86_capability[0] = capability; + c->x86_capability[4] = excap; + } - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); } + } +#ifdef CONFIG_X86_64 + if (c->extended_cpuid_level >= 0x80000008) { + u32 eax = cpuid_eax(0x80000008); + + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; } +#endif + + if (c->extended_cpuid_level >= 0x80000007) + c->x86_power = cpuid_edx(0x80000007); } +static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_32 + int i; + + /* + * First of all, decide if this is a 486 or higher + * It's a 486 if we can modify the AC flag + */ + if (flag_is_changeable_p(X86_EFLAGS_AC)) + c->x86 = 4; + else + c->x86 = 3; + + for (i = 0; i < X86_VENDOR_NUM; i++) + if (cpu_devs[i] && cpu_devs[i]->c_identify) { + c->x86_vendor_id[0] = 0; + cpu_devs[i]->c_identify(c); + if (c->x86_vendor_id[0]) { + get_cpu_vendor(c); + break; + } + } +#endif +} + /* * Do minimum CPU detection early. * Fields really needed: vendor, cpuid_level, family, model, mask, @@ -321,25 +513,61 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) * WARNING: this function is only called on the BP. Don't add code here * that is supposed to run on all CPUs. */ -static void __init early_cpu_detect(void) +static void __init early_identify_cpu(struct cpuinfo_x86 *c) { - struct cpuinfo_x86 *c = &boot_cpu_data; - - c->x86_cache_alignment = 32; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; + + memset(&c->x86_capability, 0, sizeof c->x86_capability); + c->extended_cpuid_level = 0; if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); + + /* cyrix could have cpuid enabled via c_identify()*/ + if (!have_cpuid_p()) return; cpu_detect(c); - get_cpu_vendor(c, 1); + get_cpu_vendor(c); - early_get_cap(c); + get_cpu_cap(c); - if (c->x86_vendor != X86_VENDOR_UNKNOWN && - cpu_devs[c->x86_vendor]->c_early_init) - cpu_devs[c->x86_vendor]->c_early_init(c); + if (this_cpu->c_early_init) + this_cpu->c_early_init(c); + + validate_pat_support(c); +} + +void __init early_cpu_init(void) +{ + struct cpu_dev **cdev; + int count = 0; + + printk("KERNEL supported cpus:\n"); + for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { + struct cpu_dev *cpudev = *cdev; + unsigned int j; + + if (count >= X86_VENDOR_NUM) + break; + cpu_devs[count] = cpudev; + count++; + + for (j = 0; j < 2; j++) { + if (!cpudev->c_ident[j]) + continue; + printk(" %s %s\n", cpudev->c_vendor, + cpudev->c_ident[j]); + } + } + + early_identify_cpu(&boot_cpu_data); } /* @@ -357,86 +585,41 @@ static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) static void __cpuinit generic_identify(struct cpuinfo_x86 *c) { - u32 tfms, xlvl; - unsigned int ebx; - - if (have_cpuid_p()) { - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c, 0); - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; - c->initial_apicid = (ebx >> 24) & 0xFF; -#ifdef CONFIG_X86_HT - c->apicid = phys_pkg_id(c->initial_apicid, 0); - c->phys_proc_id = c->initial_apicid; -#else - c->apicid = c->initial_apicid; -#endif - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } + c->extended_cpuid_level = 0; - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } + if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); - init_scattered_cpuid_features(c); - detect_nopl(c); - } -} + /* cyrix could have cpuid enabled via c_identify()*/ + if (!have_cpuid_p()) + return; -static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) -{ - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { - /* Disable processor serial number */ - unsigned long lo, hi; - rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_cpu_cap(c, X86_FEATURE_PN); + cpu_detect(c); - /* Disabling the serial number may affect the cpuid level */ - c->cpuid_level = cpuid_eax(0); - } -} + get_cpu_vendor(c); -static int __init x86_serial_nr_setup(char *s) -{ - disable_x86_serial_nr = 0; - return 1; -} -__setup("serialnumber", x86_serial_nr_setup); + get_cpu_cap(c); + if (c->cpuid_level >= 0x00000001) { + c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_HT + c->apicid = phys_pkg_id(c->initial_apicid, 0); +# else + c->apicid = c->initial_apicid; +# endif +#endif +#ifdef CONFIG_X86_HT + c->phys_proc_id = c->initial_apicid; +#endif + } + + get_model_name(c); /* Default name */ + + init_scattered_cpuid_features(c); + detect_nopl(c); +} /* * This does the hard work of actually picking apart the CPU stuff... @@ -448,30 +631,29 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->loops_per_jiffy = loops_per_jiffy; c->x86_cache_size = -1; c->x86_vendor = X86_VENDOR_UNKNOWN; - c->cpuid_level = -1; /* CPUID not detected */ c->x86_model = c->x86_mask = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ c->x86_max_cores = 1; + c->x86_coreid_bits = 0; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else + c->cpuid_level = -1; /* CPUID not detected */ c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (!have_cpuid_p()) { - /* - * First of all, decide if this is a 486 or higher - * It's a 486 if we can modify the AC flag - */ - if (flag_is_changeable_p(X86_EFLAGS_AC)) - c->x86 = 4; - else - c->x86 = 3; - } - generic_identify(c); if (this_cpu->c_identify) this_cpu->c_identify(c); +#ifdef CONFIG_X86_64 + c->apicid = phys_pkg_id(0); +#endif + /* * Vendor-specific initialization. In this section we * canonicalize the feature flags, meaning if there are @@ -505,6 +687,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86, c->x86_model); } +#ifdef CONFIG_X86_64 + detect_ht(c); +#endif + /* * On SMP, boot_cpu_data holds the common feature set between * all CPUs; so make sure that we indicate which features are @@ -513,7 +699,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) */ if (c != &boot_cpu_data) { /* AND the already accumulated flags with these */ - for (i = 0 ; i < NCAPINTS ; i++) + for (i = 0; i < NCAPINTS; i++) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } @@ -521,72 +707,79 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) for (i = 0; i < NCAPINTS; i++) c->x86_capability[i] &= ~cleared_cpu_caps[i]; +#ifdef CONFIG_X86_MCE /* Init Machine Check Exception if available. */ mcheck_init(c); +#endif select_idle_routine(c); + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + numa_add_cpu(smp_processor_id()); +#endif } void __init identify_boot_cpu(void) { identify_cpu(&boot_cpu_data); +#ifdef CONFIG_X86_32 sysenter_setup(); enable_sep_cpu(); +#endif } void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) { BUG_ON(c == &boot_cpu_data); identify_cpu(c); +#ifdef CONFIG_X86_32 enable_sep_cpu(); +#endif mtrr_ap_init(); } -#ifdef CONFIG_X86_HT -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) - return; - - smp_num_siblings = (ebx & 0xff0000) >> 16; +struct msr_range { + unsigned min; + unsigned max; +}; - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { +static struct msr_range msr_range_array[] __cpuinitdata = { + { 0x00000000, 0x00000418}, + { 0xc0000000, 0xc000040b}, + { 0xc0010000, 0xc0010142}, + { 0xc0011000, 0xc001103b}, +}; - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of the " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; +static void __cpuinit print_cpu_msr(void) +{ + unsigned index; + u64 val; + int i; + unsigned index_min, index_max; + + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { + if (rdmsrl_amd_safe(index, &val)) + continue; + printk(KERN_INFO " MSR%08x: %016llx\n", index, val); } + } +} - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); - - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings) ; +static int show_msr __cpuinitdata; +static __init int setup_show_msr(char *arg) +{ + int num; - core_bits = get_count_order(c->x86_max_cores); + get_option(&arg, &num); - c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & - ((1 << core_bits) - 1); - - if (c->x86_max_cores > 1) - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } + if (num > 0) + show_msr = num; + return 1; } -#endif +__setup("show_msr=", setup_show_msr); static __init int setup_noclflush(char *arg) { @@ -605,17 +798,25 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) vendor = c->x86_vendor_id; if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) - printk("%s ", vendor); + printk(KERN_CONT "%s ", vendor); - if (!c->x86_model_id[0]) - printk("%d86", c->x86); + if (c->x86_model_id[0]) + printk(KERN_CONT "%s", c->x86_model_id); else - printk("%s", c->x86_model_id); + printk(KERN_CONT "%d86", c->x86); if (c->x86_mask || c->cpuid_level >= 0) - printk(" stepping %02x\n", c->x86_mask); + printk(KERN_CONT " stepping %02x\n", c->x86_mask); else - printk("\n"); + printk(KERN_CONT "\n"); + +#ifdef CONFIG_SMP + if (c->cpu_index < show_msr) + print_cpu_msr(); +#else + if (show_msr) + print_cpu_msr(); +#endif } static __init int setup_disablecpuid(char *arg) @@ -631,19 +832,89 @@ __setup("clearcpuid=", setup_disablecpuid); cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; -void __init early_cpu_init(void) +#ifdef CONFIG_X86_64 +struct x8664_pda **_cpu_pda __read_mostly; +EXPORT_SYMBOL(_cpu_pda); + +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; + +char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; + +void __cpuinit pda_init(int cpu) +{ + struct x8664_pda *pda = cpu_pda(cpu); + + /* Setup up data that may be needed in __get_free_pages early */ + loadsegment(fs, 0); + loadsegment(gs, 0); + /* Memory clobbers used to order PDA accessed */ + mb(); + wrmsrl(MSR_GS_BASE, pda); + mb(); + + pda->cpunumber = cpu; + pda->irqcount = -1; + pda->kernelstack = (unsigned long)stack_thread_info() - + PDA_STACKOFFSET + THREAD_SIZE; + pda->active_mm = &init_mm; + pda->mmu_state = 0; + + if (cpu == 0) { + /* others are initialized in smpboot.c */ + pda->pcurrent = &init_task; + pda->irqstackptr = boot_cpu_stack; + pda->irqstackptr += IRQSTACKSIZE - 64; + } else { + if (!pda->irqstackptr) { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", + cpu); + pda->irqstackptr += IRQSTACKSIZE - 64; + } + + if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) + pda->nodenumber = cpu_to_node(cpu); + } +} + +char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + + DEBUG_STKSZ] __page_aligned_bss; + +extern asmlinkage void ignore_sysret(void); + +/* May not be marked __init: used by software suspend */ +void syscall_init(void) { - struct cpu_vendor_dev *cvdev; + /* + * LSTAR and STAR live in a bit strange symbiosis. + * They both write to the same internal register. STAR allows to + * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. + */ + wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); + wrmsrl(MSR_LSTAR, system_call); + wrmsrl(MSR_CSTAR, ignore_sysret); - for (cvdev = __x86cpuvendor_start ; - cvdev < __x86cpuvendor_end ; - cvdev++) - cpu_devs[cvdev->vendor] = cvdev->cpu_dev; +#ifdef CONFIG_IA32_EMULATION + syscall32_cpu_init(); +#endif - early_cpu_detect(); - validate_pat_support(&boot_cpu_data); + /* Flags to clear on syscall */ + wrmsrl(MSR_SYSCALL_MASK, + X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); } +unsigned long kernel_eflags; + +/* + * Copies of the original ist values from the tss are only accessed during + * debugging, no special alignment required. + */ +DEFINE_PER_CPU(struct orig_ist, orig_ist); + +#else + /* Make sure %fs is initialized properly in idle threads */ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) { @@ -651,25 +922,136 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) regs->fs = __KERNEL_PERCPU; return regs; } - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); - asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); -} +#endif /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT * and IDT. We reload them nevertheless, this function acts as a * 'CPU state barrier', nothing should get across. + * A lot of state is already set up in PDA init for 64 bit */ +#ifdef CONFIG_X86_64 +void __cpuinit cpu_init(void) +{ + int cpu = stack_smp_processor_id(); + struct tss_struct *t = &per_cpu(init_tss, cpu); + struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); + unsigned long v; + char *estacks = NULL; + struct task_struct *me; + int i; + + /* CPU 0 is initialised in head64.c */ + if (cpu != 0) + pda_init(cpu); + else + estacks = boot_exception_stacks; + + me = current; + + if (cpu_test_and_set(cpu, cpu_initialized)) + panic("CPU#%d already initialized!\n", cpu); + + printk(KERN_INFO "Initializing CPU#%d\n", cpu); + + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + + /* + * Initialize the per-CPU GDT with the boot GDT, + * and set up the GDT descriptor: + */ + + switch_to_new_gdt(); + load_idt((const struct desc_ptr *)&idt_descr); + + memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); + syscall_init(); + + wrmsrl(MSR_FS_BASE, 0); + wrmsrl(MSR_KERNEL_GS_BASE, 0); + barrier(); + + check_efer(); + if (cpu != 0 && x2apic) + enable_x2apic(); + + /* + * set up and load the per-CPU TSS + */ + if (!orig_ist->ist[0]) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception " + "stack %ld %d\n", v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->x86_tss.ist[v] = + (unsigned long)estacks; + } + } + + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + /* + * <= is required because the CPU will access up to + * 8 bits beyond the end of the IO permission bitmap. + */ + for (i = 0; i <= IO_BITMAP_LONGS; i++) + t->io_bitmap[i] = ~0UL; + + atomic_inc(&init_mm.mm_count); + me->active_mm = &init_mm; + if (me->mm) + BUG(); + enter_lazy_tlb(&init_mm, me); + + load_sp0(t, ¤t->thread); + set_tss_desc(cpu, t); + load_TR_desc(); + load_LDT(&init_mm.context); + +#ifdef CONFIG_KGDB + /* + * If the kgdb is connected no debug regs should be altered. This + * is only applicable when KGDB and a KGDB I/O module are built + * into the kernel and you are using early debugging with + * kgdbwait. KGDB will control the kernel HW breakpoint registers. + */ + if (kgdb_connected && arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + else { +#endif + /* + * Clear all 6 debug registers: + */ + + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); +#ifdef CONFIG_KGDB + /* If the kgdb is connected no debug regs should be altered. */ + } +#endif + + fpu_init(); + + raw_local_save_flags(kernel_eflags); + + if (is_uv_system()) + uv_cpu_init(); +} + +#else + void __cpuinit cpu_init(void) { int cpu = smp_processor_id(); @@ -723,9 +1105,20 @@ void __cpuinit cpu_init(void) /* * Force FPU initialization: */ - current_thread_info()->status = 0; + if (cpu_has_xsave) + current_thread_info()->status = TS_XSAVE; + else + current_thread_info()->status = 0; clear_used_math(); mxcsr_feature_mask_init(); + + /* + * Boot processor to setup the FP and extended state context info. + */ + if (!smp_processor_id()) + init_thread_xstate(); + + xsave_init(); } #ifdef CONFIG_HOTPLUG_CPU @@ -739,3 +1132,5 @@ void __cpuinit cpu_uninit(void) per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; } #endif + +#endif diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c deleted file mode 100644 index 305b465889b0..000000000000 --- a/arch/x86/kernel/cpu/common_64.c +++ /dev/null @@ -1,763 +0,0 @@ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/bitops.h> -#include <linux/module.h> -#include <linux/kgdb.h> -#include <linux/topology.h> -#include <linux/delay.h> -#include <linux/smp.h> -#include <linux/percpu.h> -#include <asm/i387.h> -#include <asm/msr.h> -#include <asm/io.h> -#include <asm/linkage.h> -#include <asm/mmu_context.h> -#include <asm/mtrr.h> -#include <asm/mce.h> -#include <asm/pat.h> -#include <asm/asm.h> -#include <asm/numa.h> -#ifdef CONFIG_X86_LOCAL_APIC -#include <asm/mpspec.h> -#include <asm/apic.h> -#include <mach_apic.h> -#endif -#include <asm/pda.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/desc.h> -#include <asm/atomic.h> -#include <asm/proto.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/genapic.h> - -#include "cpu.h" - -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ -DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { - [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, - [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, -} }; -EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); - -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); -} - -struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; - -static void __cpuinit default_init(struct cpuinfo_x86 *c) -{ - display_cacheinfo(c); -} - -static struct cpu_dev __cpuinitdata default_cpu = { - .c_init = default_init, - .c_vendor = "Unknown", -}; -static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) -{ - unsigned int *v; - - if (c->extended_cpuid_level < 0x80000004) - return 0; - - v = (unsigned int *) c->x86_model_id; - cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); - cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); - cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); - c->x86_model_id[48] = 0; - return 1; -} - - -void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) -{ - unsigned int n, dummy, ebx, ecx, edx; - - n = c->extended_cpuid_level; - - if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); - printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), " - "D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24) + (edx>>24); - /* On K8 L1 TLB is inclusive, so don't count it */ - c->x86_tlbsize = 0; - } - - if (n >= 0x80000006) { - cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); - ecx = cpuid_ecx(0x80000006); - c->x86_cache_size = ecx >> 16; - c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); - - printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - c->x86_cache_size, ecx & 0xFF); - } -} - -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - - if (!cpu_has(c, X86_FEATURE_HT)) - return; - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - goto out; - - smp_num_siblings = (ebx & 0xff0000) >> 16; - - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(index_msb); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings); - - core_bits = get_count_order(c->x86_max_cores); - - c->cpu_core_id = phys_pkg_id(index_msb) & - ((1 << core_bits) - 1); - } -out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } - -#endif -} - -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) -{ - char *v = c->x86_vendor_id; - int i; - static int printed; - - for (i = 0; i < X86_VENDOR_NUM; i++) { - if (cpu_devs[i]) { - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - c->x86_vendor = i; - this_cpu = cpu_devs[i]; - return; - } - } - } - if (!printed) { - printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); - printk(KERN_ERR "CPU: Your system may be unstable.\n"); - } - c->x86_vendor = X86_VENDOR_UNKNOWN; -} - -static void __init early_cpu_support_print(void) -{ - int i,j; - struct cpu_dev *cpu_devx; - - printk("KERNEL supported cpus:\n"); - for (i = 0; i < X86_VENDOR_NUM; i++) { - cpu_devx = cpu_devs[i]; - if (!cpu_devx) - continue; - for (j = 0; j < 2; j++) { - if (!cpu_devx->c_ident[j]) - continue; - printk(" %s %s\n", cpu_devx->c_vendor, - cpu_devx->c_ident[j]); - } - } -} - -/* - * The NOPL instruction is supposed to exist on all CPUs with - * family >= 6, unfortunately, that's not true in practice because - * of early VIA chips and (more importantly) broken virtualizers that - * are not easy to detect. Hence, probe for it based on first - * principles. - * - * Note: no 64-bit chip is known to lack these, but put the code here - * for consistency with 32 bits, and to make it utterly trivial to - * diagnose the problem should it ever surface. - */ -static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) -{ - const u32 nopl_signature = 0x888c53b1; /* Random number */ - u32 has_nopl = nopl_signature; - - clear_cpu_cap(c, X86_FEATURE_NOPL); - if (c->x86 >= 6) { - asm volatile("\n" - "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ - "2:\n" - " .section .fixup,\"ax\"\n" - "3: xor %0,%0\n" - " jmp 2b\n" - " .previous\n" - _ASM_EXTABLE(1b,3b) - : "+a" (has_nopl)); - - if (has_nopl == nopl_signature) - set_cpu_cap(c, X86_FEATURE_NOPL); - } -} - -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); - -void __init early_cpu_init(void) -{ - struct cpu_vendor_dev *cvdev; - - for (cvdev = __x86cpuvendor_start ; - cvdev < __x86cpuvendor_end ; - cvdev++) - cpu_devs[cvdev->vendor] = cvdev->cpu_dev; - early_cpu_support_print(); - early_identify_cpu(&boot_cpu_data); -} - -/* Do some early cpuid on the boot CPU to get some parameter that are - needed before check_bugs. Everything advanced is in identify_cpu - below. */ -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) -{ - u32 tfms, xlvl; - - c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; - c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ - c->x86_vendor_id[0] = '\0'; /* Unset */ - c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_clflush_size = 64; - c->x86_cache_alignment = c->x86_clflush_size; - c->x86_max_cores = 1; - c->x86_coreid_bits = 0; - c->extended_cpuid_level = 0; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c); - - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - __u32 misc; - cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], - &c->x86_capability[0]); - c->x86 = (tfms >> 8) & 0xf; - c->x86_model = (tfms >> 4) & 0xf; - c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } - - c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff; -#ifdef CONFIG_SMP - c->phys_proc_id = c->initial_apicid; -#endif - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - c->extended_cpuid_level = xlvl; - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - /* Don't set x86_cpuid_level here for now to not confuse. */ - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } - - if (c->extended_cpuid_level >= 0x80000007) - c->x86_power = cpuid_edx(0x80000007); - - if (c->extended_cpuid_level >= 0x80000008) { - u32 eax = cpuid_eax(0x80000008); - - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - detect_nopl(c); - - if (c->x86_vendor != X86_VENDOR_UNKNOWN && - cpu_devs[c->x86_vendor]->c_early_init) - cpu_devs[c->x86_vendor]->c_early_init(c); - - validate_pat_support(c); -} - -/* - * This does the hard work of actually picking apart the CPU stuff... - */ -static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) -{ - int i; - - early_identify_cpu(c); - - init_scattered_cpuid_features(c); - - c->apicid = phys_pkg_id(0); - - /* - * Vendor-specific initialization. In this section we - * canonicalize the feature flags, meaning if there are - * features a certain CPU supports which CPUID doesn't - * tell us, CPUID claiming incorrect flags, or other bugs, - * we handle them here. - * - * At the end of this section, c->x86_capability better - * indicate the features this CPU genuinely supports! - */ - if (this_cpu->c_init) - this_cpu->c_init(c); - - detect_ht(c); - - /* - * On SMP, boot_cpu_data holds the common feature set between - * all CPUs; so make sure that we indicate which features are - * common between the CPUs. The first time this routine gets - * executed, c == &boot_cpu_data. - */ - if (c != &boot_cpu_data) { - /* AND the already accumulated flags with these */ - for (i = 0; i < NCAPINTS; i++) - boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; - } - - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - -#ifdef CONFIG_X86_MCE - mcheck_init(c); -#endif - select_idle_routine(c); - -#ifdef CONFIG_NUMA - numa_add_cpu(smp_processor_id()); -#endif - -} - -void __cpuinit identify_boot_cpu(void) -{ - identify_cpu(&boot_cpu_data); -} - -void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) -{ - BUG_ON(c == &boot_cpu_data); - identify_cpu(c); - mtrr_ap_init(); -} - -static __init int setup_noclflush(char *arg) -{ - setup_clear_cpu_cap(X86_FEATURE_CLFLSH); - return 1; -} -__setup("noclflush", setup_noclflush); - -struct msr_range { - unsigned min; - unsigned max; -}; - -static struct msr_range msr_range_array[] __cpuinitdata = { - { 0x00000000, 0x00000418}, - { 0xc0000000, 0xc000040b}, - { 0xc0010000, 0xc0010142}, - { 0xc0011000, 0xc001103b}, -}; - -static void __cpuinit print_cpu_msr(void) -{ - unsigned index; - u64 val; - int i; - unsigned index_min, index_max; - - for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { - index_min = msr_range_array[i].min; - index_max = msr_range_array[i].max; - for (index = index_min; index < index_max; index++) { - if (rdmsrl_amd_safe(index, &val)) - continue; - printk(KERN_INFO " MSR%08x: %016llx\n", index, val); - } - } -} - -static int show_msr __cpuinitdata; -static __init int setup_show_msr(char *arg) -{ - int num; - - get_option(&arg, &num); - - if (num > 0) - show_msr = num; - return 1; -} -__setup("show_msr=", setup_show_msr); - -void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) -{ - if (c->x86_model_id[0]) - printk(KERN_CONT "%s", c->x86_model_id); - - if (c->x86_mask || c->cpuid_level >= 0) - printk(KERN_CONT " stepping %02x\n", c->x86_mask); - else - printk(KERN_CONT "\n"); - -#ifdef CONFIG_SMP - if (c->cpu_index < show_msr) - print_cpu_msr(); -#else - if (show_msr) - print_cpu_msr(); -#endif -} - -static __init int setup_disablecpuid(char *arg) -{ - int bit; - if (get_option(&arg, &bit) && bit < NCAPINTS*32) - setup_clear_cpu_cap(bit); - else - return 0; - return 1; -} -__setup("clearcpuid=", setup_disablecpuid); - -cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; - -struct x8664_pda **_cpu_pda __read_mostly; -EXPORT_SYMBOL(_cpu_pda); - -struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; - -char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; - -unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL_GPL(__supported_pte_mask); - -static int do_not_nx __cpuinitdata; - -/* noexec=on|off -Control non executable mappings for 64bit processes. - -on Enable(default) -off Disable -*/ -static int __init nonx_setup(char *str) -{ - if (!str) - return -EINVAL; - if (!strncmp(str, "on", 2)) { - __supported_pte_mask |= _PAGE_NX; - do_not_nx = 0; - } else if (!strncmp(str, "off", 3)) { - do_not_nx = 1; - __supported_pte_mask &= ~_PAGE_NX; - } - return 0; -} -early_param("noexec", nonx_setup); - -int force_personality32; - -/* noexec32=on|off -Control non executable heap for 32bit processes. -To control the stack too use noexec=off - -on PROT_READ does not imply PROT_EXEC for 32bit processes (default) -off PROT_READ implies PROT_EXEC -*/ -static int __init nonx32_setup(char *str) -{ - if (!strcmp(str, "on")) - force_personality32 &= ~READ_IMPLIES_EXEC; - else if (!strcmp(str, "off")) - force_personality32 |= READ_IMPLIES_EXEC; - return 1; -} -__setup("noexec32=", nonx32_setup); - -void pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); - - /* Setup up data that may be needed in __get_free_pages early */ - loadsegment(fs, 0); - loadsegment(gs, 0); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = (unsigned long)stack_thread_info() - - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - pda->irqstackptr += IRQSTACKSIZE - 64; - } else { - if (!pda->irqstackptr) { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", - cpu); - pda->irqstackptr += IRQSTACKSIZE - 64; - } - - if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) - pda->nodenumber = cpu_to_node(cpu); - } -} - -char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + - DEBUG_STKSZ] __page_aligned_bss; - -extern asmlinkage void ignore_sysret(void); - -/* May not be marked __init: used by software suspend */ -void syscall_init(void) -{ - /* - * LSTAR and STAR live in a bit strange symbiosis. - * They both write to the same internal register. STAR allows to - * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. - */ - wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); - wrmsrl(MSR_CSTAR, ignore_sysret); - -#ifdef CONFIG_IA32_EMULATION - syscall32_cpu_init(); -#endif - - /* Flags to clear on syscall */ - wrmsrl(MSR_SYSCALL_MASK, - X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); -} - -void __cpuinit check_efer(void) -{ - unsigned long efer; - - rdmsrl(MSR_EFER, efer); - if (!(efer & EFER_NX) || do_not_nx) - __supported_pte_mask &= ~_PAGE_NX; -} - -unsigned long kernel_eflags; - -/* - * Copies of the original ist values from the tss are only accessed during - * debugging, no special alignment required. - */ -DEFINE_PER_CPU(struct orig_ist, orig_ist); - -/* - * cpu_init() initializes state that is per-CPU. Some data is already - * initialized (naturally) in the bootstrap process, such as the GDT - * and IDT. We reload them nevertheless, this function acts as a - * 'CPU state barrier', nothing should get across. - * A lot of state is already set up in PDA init. - */ -void __cpuinit cpu_init(void) -{ - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; - char *estacks = NULL; - struct task_struct *me; - int i; - - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) - pda_init(cpu); - else - estacks = boot_exception_stacks; - - me = current; - - if (cpu_test_and_set(cpu, cpu_initialized)) - panic("CPU#%d already initialized!\n", cpu); - - printk(KERN_INFO "Initializing CPU#%d\n", cpu); - - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - /* - * Initialize the per-CPU GDT with the boot GDT, - * and set up the GDT descriptor: - */ - - switch_to_new_gdt(); - load_idt((const struct desc_ptr *)&idt_descr); - - memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); - syscall_init(); - - wrmsrl(MSR_FS_BASE, 0); - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - - check_efer(); - - /* - * set up and load the per-CPU TSS - */ - if (!orig_ist->ist[0]) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - for (v = 0; v < N_EXCEPTION_STACKS; v++) { - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception " - "stack %ld %d\n", v, cpu); - } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = - (unsigned long)estacks; - } - } - - t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); - /* - * <= is required because the CPU will access up to - * 8 bits beyond the end of the IO permission bitmap. - */ - for (i = 0; i <= IO_BITMAP_LONGS; i++) - t->io_bitmap[i] = ~0UL; - - atomic_inc(&init_mm.mm_count); - me->active_mm = &init_mm; - if (me->mm) - BUG(); - enter_lazy_tlb(&init_mm, me); - - load_sp0(t, ¤t->thread); - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - -#ifdef CONFIG_KGDB - /* - * If the kgdb is connected no debug regs should be altered. This - * is only applicable when KGDB and a KGDB I/O module are built - * into the kernel and you are using early debugging with - * kgdbwait. KGDB will control the kernel HW breakpoint registers. - */ - if (kgdb_connected && arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - else { -#endif - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); -#ifdef CONFIG_KGDB - /* If the kgdb is connected no debug regs should be altered. */ - } -#endif - - fpu_init(); - - raw_local_save_flags(kernel_eflags); - - if (is_uv_system()) - uv_cpu_init(); -} diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 4d894e8565fe..de4094a39210 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -21,23 +21,16 @@ struct cpu_dev { void (*c_init)(struct cpuinfo_x86 * c); void (*c_identify)(struct cpuinfo_x86 * c); unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size); + int c_x86_vendor; }; -extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM]; +#define cpu_dev_register(cpu_devX) \ + static struct cpu_dev *__cpu_dev_##cpu_devX __used \ + __attribute__((__section__(".x86_cpu_dev.init"))) = \ + &cpu_devX; -struct cpu_vendor_dev { - int vendor; - struct cpu_dev *cpu_dev; -}; - -#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \ - static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \ - __attribute__((__section__(".x86cpuvendor.init"))) = \ - { cpu_vendor_id, cpu_dev } - -extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; +extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[]; -extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); #endif diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 898a5a2002ed..ffd0f5ed071a 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -121,7 +121,7 @@ static void __cpuinit set_cx86_reorder(void) setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* Load/Store Serialize to mem access disable (=reorder it) */ - setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); + setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; setCx86(CX86_CCR3, ccr3); @@ -132,11 +132,11 @@ static void __cpuinit set_cx86_memwb(void) printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n"); /* CCR2 bit 2: unlock NW bit */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04); /* set 'Not Write-through' */ write_cr0(read_cr0() | X86_CR0_NW); /* CCR2 bit 2: lock NW bit and set WT1 */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14); + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14); } /* @@ -150,14 +150,14 @@ static void __cpuinit geode_configure(void) local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ - setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); + setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* FPU fast, DTE cache, Mem bypass */ - setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38); setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); @@ -291,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); + setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1); /* * GXm : 0x30 ... 0x5f GXm datasheet 51 @@ -301,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) */ if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f)) geode_configure(); - get_model_name(c); /* get CPU marketing name */ return; } else { /* MediaGX */ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4'; @@ -314,7 +313,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) if (dir1 > 7) { dir0_msn++; /* M II */ /* Enable MMX extensions (App note 108) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1); } else { c->coma_bug = 1; /* 6x86MX, it has the bug. */ } @@ -429,7 +428,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); /* enable cpuid */ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ local_irq_restore(flags); } @@ -442,14 +441,16 @@ static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_early_init = early_init_cyrix, .c_init = init_cyrix, .c_identify = cyrix_identify, + .c_x86_vendor = X86_VENDOR_CYRIX, }; -cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev); +cpu_dev_register(cyrix_cpu_dev); static struct cpu_dev nsc_cpu_dev __cpuinitdata = { .c_vendor = "NSC", .c_ident = { "Geode by NSC" }, .c_init = init_nsc, + .c_x86_vendor = X86_VENDOR_NSC, }; -cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev); +cpu_dev_register(nsc_cpu_dev); diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c deleted file mode 100644 index c9017799497c..000000000000 --- a/arch/x86/kernel/cpu/feature_names.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Strings for the various x86 capability flags. - * - * This file must not contain any executable code. - */ - -#include <asm/cpufeature.h> - -/* - * These flag bits must match the definitions in <asm/cpufeature.h>. - * NULL means this bit is undefined or reserved; either way it doesn't - * have meaning as far as Linux is concerned. Note that it's important - * to realize there is a difference between this table and CPUID -- if - * applications want to get the raw CPUID data, they should access - * /dev/cpu/<cpu_nr>/cpuid instead. - */ -const char * const x86_cap_flags[NCAPINTS*32] = { - /* Intel-defined */ - "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", - "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", - "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", - "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", - - /* AMD-defined */ - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", - "3dnowext", "3dnow", - - /* Transmeta-defined */ - "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Other (Linux-defined) */ - "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", - NULL, NULL, NULL, NULL, - "constant_tsc", "up", NULL, "arch_perfmon", - "pebs", "bts", NULL, NULL, - "rep_good", NULL, NULL, NULL, - "nopl", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt", - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* VIA/Cyrix/Centaur-defined */ - NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", - "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", - "cr8_legacy", "abm", "sse4a", "misalignsse", - "3dnowprefetch", "osvw", "ibs", "sse5", - "skinit", "wdt", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Auxiliary (Linux-defined) */ - "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, -}; - -const char *const x86_power_flags[32] = { - "ts", /* temperature sensor */ - "fid", /* frequency id control */ - "vid", /* voltage id control */ - "ttp", /* thermal trip */ - "tm", - "stc", - "100mhzsteps", - "hwpstate", - "", /* tsc invariant mapped to constant_tsc */ - /* nothing */ -}; diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index f113ef4595f6..99468dbd08da 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -15,6 +15,11 @@ #include <asm/ds.h> #include <asm/bugs.h> +#ifdef CONFIG_X86_64 +#include <asm/topology.h> +#include <asm/numa_64.h> +#endif + #include "cpu.h" #ifdef CONFIG_X86_LOCAL_APIC @@ -23,23 +28,22 @@ #include <mach_apic.h> #endif -#ifdef CONFIG_X86_INTEL_USERCOPY -/* - * Alignment at which movsl is preferred for bulk memory copies. - */ -struct movsl_mask movsl_mask __read_mostly; -#endif - static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { - /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ - if (c->x86 == 15 && c->x86_cache_alignment == 64) - c->x86_cache_alignment = 128; if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSENTER32); +#else + /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ + if (c->x86 == 15 && c->x86_cache_alignment == 64) + c->x86_cache_alignment = 128; +#endif } +#ifdef CONFIG_X86_32 /* * Early probe support logic for ppro memory erratum #50 * @@ -59,15 +63,54 @@ int __cpuinit ppro_with_ram_bug(void) return 0; } +#ifdef CONFIG_X86_F00F_BUG +static void __cpuinit trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); -/* - * P4 Xeon errata 037 workaround. - * Hardware prefetcher may cause stale data to be loaded into the cache. - */ -static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + load_idt(&idt_descr); +} +#endif + +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) { unsigned long lo, hi; +#ifdef CONFIG_X86_F00F_BUG + /* + * All current models of Pentium and Pentium with MMX technology CPUs + * have the F0 0F bug, which lets nonprivileged users lock up the system. + * Note that the workaround only should be initialized once... + */ + c->f00f_bug = 0; + if (!paravirt_enabled() && c->x86 == 5) { + static int f00f_workaround_enabled; + + c->f00f_bug = 1; + if (!f00f_workaround_enabled) { + trap_init_f00f_bug(); + printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); + f00f_workaround_enabled = 1; + } + } +#endif + + /* + * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until + * model 3 mask 3 + */ + if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + clear_cpu_cap(c, X86_FEATURE_SEP); + + /* + * P4 Xeon errata 037 workaround. + * Hardware prefetcher may cause stale data to be loaded into the cache. + */ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { rdmsr(MSR_IA32_MISC_ENABLE, lo, hi); if ((lo & (1<<9)) == 0) { @@ -77,13 +120,68 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); } } + + /* + * See if we have a good local APIC by checking for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ + if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && + (c->x86_mask < 0x6 || c->x86_mask == 0xb)) + set_cpu_cap(c, X86_FEATURE_11AP); + + +#ifdef CONFIG_X86_INTEL_USERCOPY + /* + * Set up the preferred alignment for movsl bulk memory moves + */ + switch (c->x86) { + case 4: /* 486: untested */ + break; + case 5: /* Old Pentia: untested */ + break; + case 6: /* PII/PIII only like movsl with 8-byte alignment */ + movsl_mask.mask = 7; + break; + case 15: /* P4 is OK down to 8-byte alignment */ + movsl_mask.mask = 7; + break; + } +#endif + +#ifdef CONFIG_X86_NUMAQ + numaq_tsc_disable(); +#endif } +#else +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) +{ +} +#endif +static void __cpuinit srat_detect_node(void) +{ +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} /* * find out the number of processor cores on the die */ -static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax, ebx, ecx, edx; @@ -98,45 +196,51 @@ static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -#ifdef CONFIG_X86_F00F_BUG -static void __cpuinit trap_init_f00f_bug(void) +static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c) { - __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); - - /* - * Update the IDT descriptor and reload the IDT so that - * it uses the read-only mapped virtual address. - */ - idt_descr.address = fix_to_virt(FIX_F00F_IDT); - load_idt(&idt_descr); + /* Intel VMX MSR indicated features */ +#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000 +#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000 +#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000 +#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001 +#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002 +#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020 + + u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2; + + clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + clear_cpu_cap(c, X86_FEATURE_VNMI); + clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + clear_cpu_cap(c, X86_FEATURE_EPT); + clear_cpu_cap(c, X86_FEATURE_VPID); + + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high); + msr_ctl = vmx_msr_high | vmx_msr_low; + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW) + set_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI) + set_cpu_cap(c, X86_FEATURE_VNMI); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) { + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2, + vmx_msr_low, vmx_msr_high); + msr_ctl2 = vmx_msr_high | vmx_msr_low; + if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) && + (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)) + set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT) + set_cpu_cap(c, X86_FEATURE_EPT); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID) + set_cpu_cap(c, X86_FEATURE_VPID); + } } -#endif static void __cpuinit init_intel(struct cpuinfo_x86 *c) { unsigned int l2 = 0; - char *p = NULL; early_init_intel(c); -#ifdef CONFIG_X86_F00F_BUG - /* - * All current models of Pentium and Pentium with MMX technology CPUs - * have the F0 0F bug, which lets nonprivileged users lock up the system. - * Note that the workaround only should be initialized once... - */ - c->f00f_bug = 0; - if (!paravirt_enabled() && c->x86 == 5) { - static int f00f_workaround_enabled; - - c->f00f_bug = 1; - if (!f00f_workaround_enabled) { - trap_init_f00f_bug(); - printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); - f00f_workaround_enabled = 1; - } - } -#endif + intel_workarounds(c); l2 = init_intel_cacheinfo(c); if (c->cpuid_level > 9) { @@ -146,16 +250,32 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); } - /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ - if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) - clear_cpu_cap(c, X86_FEATURE_SEP); + if (cpu_has_xmm2) + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + if (cpu_has_ds) { + unsigned int l1; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + ds_init_intel(c); + } +#ifdef CONFIG_X86_64 + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else /* * Names for the Pentium II/Celeron processors * detectable only by also checking the cache size. * Dixon is NOT a Celeron. */ if (c->x86 == 6) { + char *p = NULL; + switch (c->x86_model) { case 5: if (c->x86_mask == 0) { @@ -178,71 +298,41 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) p = "Celeron (Coppermine)"; break; } - } - - if (p) - strcpy(c->x86_model_id, p); - - c->x86_max_cores = num_cpu_cores(c); - - detect_ht(c); - /* Work around errata */ - Intel_errata_workarounds(c); - -#ifdef CONFIG_X86_INTEL_USERCOPY - /* - * Set up the preferred alignment for movsl bulk memory moves - */ - switch (c->x86) { - case 4: /* 486: untested */ - break; - case 5: /* Old Pentia: untested */ - break; - case 6: /* PII/PIII only like movsl with 8-byte alignment */ - movsl_mask.mask = 7; - break; - case 15: /* P4 is OK down to 8-byte alignment */ - movsl_mask.mask = 7; - break; + if (p) + strcpy(c->x86_model_id, p); } -#endif - if (cpu_has_xmm2) - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - if (c->x86 == 15) { + if (c->x86 == 15) set_cpu_cap(c, X86_FEATURE_P4); - } if (c->x86 == 6) set_cpu_cap(c, X86_FEATURE_P3); - if (cpu_has_ds) { - unsigned int l1; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - ds_init_intel(c); - } if (cpu_has_bts) ptrace_bts_init_intel(c); - /* - * See if we have a good local APIC by checking for buggy Pentia, - * i.e. all B steppings and the C2 stepping of P54C when using their - * integrated APIC (see 11AP erratum in "Pentium Processor - * Specification Update"). - */ - if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && - (c->x86_mask < 0x6 || c->x86_mask == 0xb)) - set_cpu_cap(c, X86_FEATURE_11AP); +#endif -#ifdef CONFIG_X86_NUMAQ - numaq_tsc_disable(); + detect_extended_topology(c); + if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) { + /* + * let's use the legacy cpuid vector 0x1 and 0x4 for topology + * detection. + */ + c->x86_max_cores = intel_num_cpu_cores(c); +#ifdef CONFIG_X86_32 + detect_ht(c); #endif + } + + /* Work around errata */ + srat_detect_node(); + + if (cpu_has(c, X86_FEATURE_VMX)) + detect_vmx_virtcap(c); } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* @@ -255,10 +345,12 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned i size = 256; return size; } +#endif static struct cpu_dev intel_cpu_dev __cpuinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = { @@ -308,76 +400,12 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = intel_size_cache, +#endif .c_early_init = early_init_intel, .c_init = init_intel, - .c_size_cache = intel_size_cache, + .c_x86_vendor = X86_VENDOR_INTEL, }; -cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); - -#ifndef CONFIG_X86_CMPXCHG -unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) -{ - u8 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u8 *)ptr; - if (prev == old) - *(u8 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u8); - -unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) -{ - u16 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u16 *)ptr; - if (prev == old) - *(u16 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u16); - -unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) -{ - u32 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u32 *)ptr; - if (prev == old) - *(u32 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u32); -#endif - -#ifndef CONFIG_X86_CMPXCHG64 -unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) -{ - u64 prev; - unsigned long flags; - - /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u64 *)ptr; - if (prev == old) - *(u64 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_486_u64); -#endif - -/* arch_initcall(intel_cpu_init); */ +cpu_dev_register(intel_cpu_dev); diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c deleted file mode 100644 index 1019c58d39f0..000000000000 --- a/arch/x86/kernel/cpu/intel_64.c +++ /dev/null @@ -1,95 +0,0 @@ -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/topology.h> -#include <asm/numa_64.h> - -#include "cpu.h" - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - - set_cpu_cap(c, X86_FEATURE_SYSENTER32); -} - -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static struct cpu_dev intel_cpu_dev __cpuinitdata = { - .c_vendor = "Intel", - .c_ident = { "GenuineIntel" }, - .c_early_init = early_init_intel, - .c_init = init_intel, -}; -cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); - diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 6b0a10b002f1..3f46afbb1cf1 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -1,8 +1,8 @@ /* - * Routines to indentify caches on Intel CPU. + * Routines to indentify caches on Intel CPU. * - * Changes: - * Venkatesh Pallipadi : Adding cache identification through cpuid(4) + * Changes: + * Venkatesh Pallipadi : Adding cache identification through cpuid(4) * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure. * Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD. */ @@ -13,6 +13,7 @@ #include <linux/compiler.h> #include <linux/cpu.h> #include <linux/sched.h> +#include <linux/pci.h> #include <asm/processor.h> #include <asm/smp.h> @@ -130,9 +131,18 @@ struct _cpuid4_info { union _cpuid4_leaf_ebx ebx; union _cpuid4_leaf_ecx ecx; unsigned long size; + unsigned long can_disable; cpumask_t shared_cpu_map; /* future?: only cpus/node is needed */ }; +#ifdef CONFIG_PCI +static struct pci_device_id k8_nb_id[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) }, + {} +}; +#endif + unsigned short num_cache_leaves; /* AMD doesn't have CPUID4. Emulate it here to report the same @@ -182,9 +192,10 @@ static unsigned short assocs[] __cpuinitdata = { static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 }; static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 }; -static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, - union _cpuid4_leaf_ebx *ebx, - union _cpuid4_leaf_ecx *ecx) +static void __cpuinit +amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, + union _cpuid4_leaf_ebx *ebx, + union _cpuid4_leaf_ecx *ecx) { unsigned dummy; unsigned line_size, lines_per_tag, assoc, size_in_kb; @@ -251,27 +262,40 @@ static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, (ebx->split.ways_of_associativity + 1) - 1; } -static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +static void __cpuinit +amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf) +{ + if (index < 3) + return; + this_leaf->can_disable = 1; +} + +static int +__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { union _cpuid4_leaf_eax eax; union _cpuid4_leaf_ebx ebx; union _cpuid4_leaf_ecx ecx; unsigned edx; - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { amd_cpuid4(index, &eax, &ebx, &ecx); - else - cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + if (boot_cpu_data.x86 >= 0x10) + amd_check_l3_disable(index, this_leaf); + } else { + cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + } + if (eax.split.type == CACHE_TYPE_NULL) return -EIO; /* better error ? */ this_leaf->eax = eax; this_leaf->ebx = ebx; this_leaf->ecx = ecx; - this_leaf->size = (ecx.split.number_of_sets + 1) * - (ebx.split.coherency_line_size + 1) * - (ebx.split.physical_line_partition + 1) * - (ebx.split.ways_of_associativity + 1); + this_leaf->size = (ecx.split.number_of_sets + 1) * + (ebx.split.coherency_line_size + 1) * + (ebx.split.physical_line_partition + 1) * + (ebx.split.ways_of_associativity + 1); return 0; } @@ -453,7 +477,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) /* pointer to _cpuid4_info array (for each cache leaf) */ static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info); -#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y])) +#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y])) #ifdef CONFIG_SMP static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) @@ -490,7 +514,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) this_leaf = CPUID4_INFO_IDX(cpu, index); for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) { - sibling_leaf = CPUID4_INFO_IDX(sibling, index); + sibling_leaf = CPUID4_INFO_IDX(sibling, index); cpu_clear(cpu, sibling_leaf->shared_cpu_map); } } @@ -572,7 +596,7 @@ struct _index_kobject { /* pointer to array of kobjects for cpuX/cache/indexY */ static DEFINE_PER_CPU(struct _index_kobject *, index_kobject); -#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y])) +#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y])) #define show_one_plus(file_name, object, val) \ static ssize_t show_##file_name \ @@ -637,6 +661,99 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) { } } +#define to_object(k) container_of(k, struct _index_kobject, kobj) +#define to_attr(a) container_of(a, struct _cache_attr, attr) + +#ifdef CONFIG_PCI +static struct pci_dev *get_k8_northbridge(int node) +{ + struct pci_dev *dev = NULL; + int i; + + for (i = 0; i <= node; i++) { + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (!dev) + break; + } while (!pci_match_id(&k8_nb_id[0], dev)); + if (!dev) + break; + } + return dev; +} +#else +static struct pci_dev *get_k8_northbridge(int node) +{ + return NULL; +} +#endif + +static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf) +{ + int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + struct pci_dev *dev = NULL; + ssize_t ret = 0; + int i; + + if (!this_leaf->can_disable) + return sprintf(buf, "Feature not enabled\n"); + + dev = get_k8_northbridge(node); + if (!dev) { + printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n"); + return -EINVAL; + } + + for (i = 0; i < 2; i++) { + unsigned int reg; + + pci_read_config_dword(dev, 0x1BC + i * 4, ®); + + ret += sprintf(buf, "%sEntry: %d\n", buf, i); + ret += sprintf(buf, "%sReads: %s\tNew Entries: %s\n", + buf, + reg & 0x80000000 ? "Disabled" : "Allowed", + reg & 0x40000000 ? "Disabled" : "Allowed"); + ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n", + buf, (reg & 0x30000) >> 16, reg & 0xfff); + } + return ret; +} + +static ssize_t +store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf, + size_t count) +{ + int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + struct pci_dev *dev = NULL; + unsigned int ret, index, val; + + if (!this_leaf->can_disable) + return 0; + + if (strlen(buf) > 15) + return -EINVAL; + + ret = sscanf(buf, "%x %x", &index, &val); + if (ret != 2) + return -EINVAL; + if (index > 1) + return -EINVAL; + + val |= 0xc0000000; + dev = get_k8_northbridge(node); + if (!dev) { + printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n"); + return -EINVAL; + } + + pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000); + wbinvd(); + pci_write_config_dword(dev, 0x1BC + index * 4, val); + + return 1; +} + struct _cache_attr { struct attribute attr; ssize_t (*show)(struct _cpuid4_info *, char *); @@ -657,6 +774,8 @@ define_one_ro(size); define_one_ro(shared_cpu_map); define_one_ro(shared_cpu_list); +static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable); + static struct attribute * default_attrs[] = { &type.attr, &level.attr, @@ -667,12 +786,10 @@ static struct attribute * default_attrs[] = { &size.attr, &shared_cpu_map.attr, &shared_cpu_list.attr, + &cache_disable.attr, NULL }; -#define to_object(k) container_of(k, struct _index_kobject, kobj) -#define to_attr(a) container_of(a, struct _cache_attr, attr) - static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf) { struct _cache_attr *fattr = to_attr(attr); @@ -682,14 +799,22 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf) ret = fattr->show ? fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), buf) : - 0; + 0; return ret; } static ssize_t store(struct kobject * kobj, struct attribute * attr, const char * buf, size_t count) { - return 0; + struct _cache_attr *fattr = to_attr(attr); + struct _index_kobject *this_leaf = to_object(kobj); + ssize_t ret; + + ret = fattr->store ? + fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), + buf, count) : + 0; + return ret; } static struct sysfs_ops sysfs_ops = { diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 726a5fcdf341..4b031a4ac856 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -860,7 +860,7 @@ error: return err; } -static void mce_remove_device(unsigned int cpu) +static __cpuinit void mce_remove_device(unsigned int cpu) { int i; diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl new file mode 100644 index 000000000000..dfea390e1608 --- /dev/null +++ b/arch/x86/kernel/cpu/mkcapflags.pl @@ -0,0 +1,32 @@ +#!/usr/bin/perl +# +# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h +# + +($in, $out) = @ARGV; + +open(IN, "< $in\0") or die "$0: cannot open: $in: $!\n"; +open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n"; + +print OUT "#include <asm/cpufeature.h>\n\n"; +print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; + +while (defined($line = <IN>)) { + if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { + $macro = $1; + $feature = $2; + $tail = $3; + if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { + $feature = $1; + } + + if ($feature ne '') { + printf OUT "\t%-32s = \"%s\",\n", + "[$macro]", "\L$feature"; + } + } +} +print OUT "};\n"; + +close(IN); +close(OUT); diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c new file mode 100644 index 000000000000..5abbea297e0c --- /dev/null +++ b/arch/x86/kernel/cpu/powerflags.c @@ -0,0 +1,20 @@ +/* + * Strings for the various x86 power flags + * + * This file must not contain any executable code. + */ + +#include <asm/cpufeature.h> + +const char *const x86_power_flags[32] = { + "ts", /* temperature sensor */ + "fid", /* frequency id control */ + "vid", /* voltage id control */ + "ttp", /* thermal trip */ + "tm", + "stc", + "100mhzsteps", + "hwpstate", + "", /* tsc invariant mapped to constant_tsc */ + /* nothing */ +}; diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c index b911a2c61b8f..52b3fefbd5af 100644 --- a/arch/x86/kernel/cpu/transmeta.c +++ b/arch/x86/kernel/cpu/transmeta.c @@ -5,6 +5,18 @@ #include <asm/msr.h> #include "cpu.h" +static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c) +{ + u32 xlvl; + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ((xlvl & 0xffff0000) == 0x80860000) { + if (xlvl >= 0x80860001) + c->x86_capability[2] = cpuid_edx(0x80860001); + } +} + static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; @@ -12,7 +24,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; - get_model_name(c); /* Same as AMD/Cyrix */ + early_init_transmeta(c); + display_cacheinfo(c); /* Print CMS and CPU revision */ @@ -85,23 +98,12 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) #endif } -static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c) -{ - u32 xlvl; - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } -} - static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { .c_vendor = "Transmeta", .c_ident = { "GenuineTMx86", "TransmetaCPU" }, + .c_early_init = early_init_transmeta, .c_init = init_transmeta, - .c_identify = transmeta_identify, + .c_x86_vendor = X86_VENDOR_TRANSMETA, }; -cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev); +cpu_dev_register(transmeta_cpu_dev); diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c index b1fc90989d75..e777f79e0960 100644 --- a/arch/x86/kernel/cpu/umc.c +++ b/arch/x86/kernel/cpu/umc.c @@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = { } }, }, + .c_x86_vendor = X86_VENDOR_UMC, }; -cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev); +cpu_dev_register(umc_cpu_dev); diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 66e48aa2dd1b..78e642feac30 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -148,6 +148,9 @@ void __init e820_print_map(char *who) case E820_NVS: printk(KERN_CONT "(ACPI NVS)\n"); break; + case E820_UNUSABLE: + printk("(unusable)\n"); + break; default: printk(KERN_CONT "type %u\n", e820.map[i].type); break; @@ -1260,6 +1263,7 @@ static inline const char *e820_type_to_string(int e820_type) case E820_RAM: return "System RAM"; case E820_ACPI: return "ACPI Tables"; case E820_NVS: return "ACPI Non-volatile Storage"; + case E820_UNUSABLE: return "Unusable memory"; default: return "reserved"; } } @@ -1267,6 +1271,7 @@ static inline const char *e820_type_to_string(int e820_type) /* * Mark e820 reserved areas as busy for the resource manager. */ +static struct resource __initdata *e820_res; void __init e820_reserve_resources(void) { int i; @@ -1274,6 +1279,7 @@ void __init e820_reserve_resources(void) u64 end; res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map); + e820_res = res; for (i = 0; i < e820.nr_map; i++) { end = e820.map[i].addr + e820.map[i].size - 1; #ifndef CONFIG_RESOURCES_64BIT @@ -1287,7 +1293,14 @@ void __init e820_reserve_resources(void) res->end = end; res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); + + /* + * don't register the region that could be conflicted with + * pci device BAR resource and insert them later in + * pcibios_resource_survey() + */ + if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) + insert_resource(&iomem_resource, res); res++; } @@ -1299,6 +1312,19 @@ void __init e820_reserve_resources(void) } } +void __init e820_reserve_resources_late(void) +{ + int i; + struct resource *res; + + res = e820_res; + for (i = 0; i < e820.nr_map; i++) { + if (!res->parent && res->end) + reserve_region_with_split(&iomem_resource, res->start, res->end, res->name); + res++; + } +} + char *__init default_machine_specific_memory_setup(void) { char *who = "BIOS-e820"; diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/kernel/es7000_32.c index 50189af14b85..849e5cd485b8 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/kernel/es7000_32.c @@ -39,10 +39,93 @@ #include <asm/nmi.h> #include <asm/smp.h> #include <asm/apicdef.h> -#include "es7000.h" #include <mach_mpparse.h> /* + * ES7000 chipsets + */ + +#define NON_UNISYS 0 +#define ES7000_CLASSIC 1 +#define ES7000_ZORRO 2 + + +#define MIP_REG 1 +#define MIP_PSAI_REG 4 + +#define MIP_BUSY 1 +#define MIP_SPIN 0xf0000 +#define MIP_VALID 0x0100000000000000ULL +#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff) + +#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) + +struct mip_reg_info { + unsigned long long mip_info; + unsigned long long delivery_info; + unsigned long long host_reg; + unsigned long long mip_reg; +}; + +struct part_info { + unsigned char type; + unsigned char length; + unsigned char part_id; + unsigned char apic_mode; + unsigned long snum; + char ptype[16]; + char sname[64]; + char pname[64]; +}; + +struct psai { + unsigned long long entry_type; + unsigned long long addr; + unsigned long long bep_addr; +}; + +struct es7000_mem_info { + unsigned char type; + unsigned char length; + unsigned char resv[6]; + unsigned long long start; + unsigned long long size; +}; + +struct es7000_oem_table { + unsigned long long hdr; + struct mip_reg_info mip; + struct part_info pif; + struct es7000_mem_info shm; + struct psai psai; +}; + +#ifdef CONFIG_ACPI + +struct oem_table { + struct acpi_table_header Header; + u32 OEMTableAddr; + u32 OEMTableSize; +}; + +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); +#endif + +struct mip_reg { + unsigned long long off_0; + unsigned long long off_8; + unsigned long long off_10; + unsigned long long off_18; + unsigned long long off_20; + unsigned long long off_28; + unsigned long long off_30; + unsigned long long off_38; +}; + +#define MIP_SW_APIC 0x1020b +#define MIP_FUNC(VALUE) (VALUE & 0xff) + +/* * ES7000 Globals */ @@ -72,7 +155,7 @@ es7000_rename_gsi(int ioapic, int gsi) base += nr_ioapic_registers[i]; } - if (!ioapic && (gsi < 16)) + if (!ioapic && (gsi < 16)) gsi += base; return gsi; } diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index eaff0bbb1444..6c9bfc9e1e95 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -16,87 +16,63 @@ #include <linux/ctype.h> #include <linux/init.h> #include <linux/hardirq.h> +#include <linux/dmar.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -DEFINE_PER_CPU(int, x2apic_extra_bits); +extern struct genapic apic_flat; +extern struct genapic apic_physflat; +extern struct genapic apic_x2xpic_uv_x; +extern struct genapic apic_x2apic_phys; +extern struct genapic apic_x2apic_cluster; struct genapic __read_mostly *genapic = &apic_flat; -static enum uv_system_type uv_system_type; +static struct genapic *apic_probe[] __initdata = { + &apic_x2apic_uv_x, + &apic_x2apic_phys, + &apic_x2apic_cluster, + &apic_physflat, + NULL, +}; /* * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. */ void __init setup_apic_routing(void) { - if (uv_system_type == UV_NON_UNIQUE_APIC) - genapic = &apic_x2apic_uv_x; - else -#ifdef CONFIG_ACPI - /* - * Quirk: some x86_64 machines can only use physical APIC mode - * regardless of how many processors are present (x86_64 ES7000 - * is an example). - */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && - (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) - genapic = &apic_physflat; - else -#endif - - if (max_physical_apicid < 8) - genapic = &apic_flat; - else - genapic = &apic_physflat; + if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) { + if (!intr_remapping_enabled) + genapic = &apic_flat; + } - printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + if (genapic == &apic_flat) { + if (max_physical_apicid >= 8) + genapic = &apic_physflat; + printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + } } /* Same for both flat and physical. */ -void send_IPI_self(int vector) +void apic_send_IPI_self(int vector) { __send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); } int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strcmp(oem_id, "SGI")) { - if (!strcmp(oem_table_id, "UVL")) - uv_system_type = UV_LEGACY_APIC; - else if (!strcmp(oem_table_id, "UVX")) - uv_system_type = UV_X2APIC; - else if (!strcmp(oem_table_id, "UVH")) - uv_system_type = UV_NON_UNIQUE_APIC; + int i; + + for (i = 0; apic_probe[i]; ++i) { + if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { + genapic = apic_probe[i]; + printk(KERN_INFO "Setting APIC routing to %s.\n", + genapic->name); + return 1; + } } return 0; } - -unsigned int read_apic_id(void) -{ - unsigned int id; - - WARN_ON(preemptible() && num_online_cpus() > 1); - id = apic_read(APIC_ID); - if (uv_system_type >= UV_X2APIC) - id |= __get_cpu_var(x2apic_extra_bits); - return id; -} - -enum uv_system_type get_uv_system_type(void) -{ - return uv_system_type; -} - -int is_uv_system(void) -{ - return uv_system_type != UV_NONE; -} -EXPORT_SYMBOL_GPL(is_uv_system); diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c index 786548a62d38..9eca5ba7a6b1 100644 --- a/arch/x86/kernel/genapic_flat_64.c +++ b/arch/x86/kernel/genapic_flat_64.c @@ -15,9 +15,20 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> +#include <mach_apicdef.h> + +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 1; +} static cpumask_t flat_target_cpus(void) { @@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector) __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = (((x)>>24) & 0xFFu); + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = ((id & 0xFFu)<<24); + return x; +} + +static unsigned int read_xapic_id(void) +{ + unsigned int id; + + id = get_apic_id(apic_read(APIC_ID)); + return id; +} + static int flat_apic_id_registered(void) { - return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map); + return physid_isset(read_xapic_id(), phys_cpu_present_map); } static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) @@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb) struct genapic apic_flat = { .name = "flat", + .acpi_madt_oem_check = flat_acpi_madt_oem_check, .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), .target_cpus = flat_target_cpus, @@ -121,8 +157,12 @@ struct genapic apic_flat = { .send_IPI_all = flat_send_IPI_all, .send_IPI_allbutself = flat_send_IPI_allbutself, .send_IPI_mask = flat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; /* @@ -130,6 +170,21 @@ struct genapic apic_flat = { * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ +static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +#ifdef CONFIG_ACPI + /* + * Quirk: some x86_64 machines can only use physical APIC mode + * regardless of how many processors are present (x86_64 ES7000 + * is an example). + */ + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) + return 1; +#endif + + return 0; +} static cpumask_t physflat_target_cpus(void) { @@ -176,6 +231,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) struct genapic apic_physflat = { .name = "physical flat", + .acpi_madt_oem_check = physflat_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = physflat_target_cpus, @@ -185,6 +241,10 @@ struct genapic apic_physflat = { .send_IPI_all = physflat_send_IPI_all, .send_IPI_allbutself = physflat_send_IPI_allbutself, .send_IPI_mask = physflat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c new file mode 100644 index 000000000000..e4bf2cc0d743 --- /dev/null +++ b/arch/x86/kernel/genx2apic_cluster.c @@ -0,0 +1,159 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +/* + * for now each logical cpu is in its own vector allocation domain. + */ +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +/* + * for now, we send the IPI's one by one in the cpumask. + * TBD: Based on the cpu mask, we can send the IPI's to the cluster group + * at once. We have 16 cpu's in a cluster. This will minimize IPI register + * writes. + */ +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu), + vector, APIC_DEST_LOGICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_logical_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return current_cpu_data.initial_apicid >> index_msb; +} + +static void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +static void init_x2apic_ldr(void) +{ + int cpu = smp_processor_id(); + + per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR); + return; +} + +struct genapic apic_x2apic_cluster = { + .name = "cluster x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_LowestPrio, + .int_dest_mode = (APIC_DEST_LOGICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c new file mode 100644 index 000000000000..8f1343df2627 --- /dev/null +++ b/arch/x86/kernel/genx2apic_phys.c @@ -0,0 +1,154 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +static int x2apic_phys; + +static int set_x2apic_phys_mode(char *arg) +{ + x2apic_phys = 1; + return 0; +} +early_param("x2apic_phys", set_x2apic_phys_mode); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic && x2apic_phys) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu), + vector, APIC_DEST_PHYSICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return current_cpu_data.initial_apicid >> index_msb; +} + +void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +void init_x2apic_ldr(void) +{ + return; +} + +struct genapic apic_x2apic_phys = { + .name = "physical x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_Fixed, + .int_dest_mode = (APIC_DEST_PHYSICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index bfa837cb16be..ae2ffc8a400c 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -12,12 +12,12 @@ #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/string.h> -#include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/bootmem.h> #include <linux/module.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> @@ -26,6 +26,36 @@ #include <asm/uv/uv_hub.h> #include <asm/uv/bios.h> +DEFINE_PER_CPU(int, x2apic_extra_bits); + +static enum uv_system_type uv_system_type; + +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strcmp(oem_id, "SGI")) { + if (!strcmp(oem_table_id, "UVL")) + uv_system_type = UV_LEGACY_APIC; + else if (!strcmp(oem_table_id, "UVX")) + uv_system_type = UV_X2APIC; + else if (!strcmp(oem_table_id, "UVH")) { + uv_system_type = UV_NON_UNIQUE_APIC; + return 1; + } + } + return 0; +} + +enum uv_system_type get_uv_system_type(void) +{ + return uv_system_type; +} + +int is_uv_system(void) +{ + return uv_system_type != UV_NONE; +} +EXPORT_SYMBOL_GPL(is_uv_system); + DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); @@ -123,6 +153,10 @@ static int uv_apic_id_registered(void) return 1; } +static void uv_init_apic_ldr(void) +{ +} + static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) { int cpu; @@ -138,9 +172,34 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) return BAD_APICID; } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + WARN_ON(preemptible() && num_online_cpus() > 1); + id = x | __get_cpu_var(x2apic_extra_bits); + + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + /* maskout x2apic_extra_bits ? */ + x = id; + return x; +} + +static unsigned int uv_read_apic_id(void) +{ + + return get_apic_id(apic_read(APIC_ID)); +} + static unsigned int phys_pkg_id(int index_msb) { - return GET_APIC_ID(read_apic_id()) >> index_msb; + return uv_read_apic_id() >> index_msb; } #ifdef ZZZ /* Needs x2apic patch */ @@ -152,17 +211,22 @@ static void uv_send_IPI_self(int vector) struct genapic apic_x2apic_uv_x = { .name = "UV large system", + .acpi_madt_oem_check = uv_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = uv_target_cpus, .vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */ .apic_id_registered = uv_apic_id_registered, + .init_apic_ldr = uv_init_apic_ldr, .send_IPI_all = uv_send_IPI_all, .send_IPI_allbutself = uv_send_IPI_allbutself, .send_IPI_mask = uv_send_IPI_mask, /* ZZZ.send_IPI_self = uv_send_IPI_self, */ .cpu_mask_to_apicid = uv_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), }; static __cpuinit void set_x2apic_extra_bits(int pnode) @@ -401,3 +465,5 @@ void __cpuinit uv_cpu_init(void) if (get_uv_system_type() == UV_NON_UNIQUE_APIC) set_x2apic_extra_bits(uv_hub_info->pnode); } + + diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index eb9ddd8efb82..45723f1fe198 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -21,9 +21,12 @@ # include <asm/sigcontext32.h> # include <asm/user32.h> #else -# define save_i387_ia32 save_i387 -# define restore_i387_ia32 restore_i387 +# define save_i387_xstate_ia32 save_i387_xstate +# define restore_i387_xstate_ia32 restore_i387_xstate # define _fpstate_ia32 _fpstate +# define _xstate_ia32 _xstate +# define sig_xstate_ia32_size sig_xstate_size +# define fx_sw_reserved_ia32 fx_sw_reserved # define user_i387_ia32_struct user_i387_struct # define user32_fxsr_struct user_fxsr_struct #endif @@ -36,6 +39,7 @@ static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; unsigned int xstate_size; +unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32); static struct i387_fxsave_struct fx_scratch __cpuinitdata; void __cpuinit mxcsr_feature_mask_init(void) @@ -61,6 +65,11 @@ void __init init_thread_xstate(void) return; } + if (cpu_has_xsave) { + xsave_cntxt_init(); + return; + } + if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -83,9 +92,19 @@ void __cpuinit fpu_init(void) write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */ + /* + * Boot processor to setup the FP and extended state context info. + */ + if (!smp_processor_id()) + init_thread_xstate(); + xsave_init(); + mxcsr_feature_mask_init(); /* clean state in init */ - current_thread_info()->status = 0; + if (cpu_has_xsave) + current_thread_info()->status = TS_XSAVE; + else + current_thread_info()->status = 0; clear_used_math(); } #endif /* CONFIG_X86_64 */ @@ -195,6 +214,13 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, */ target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask; + /* + * update the header bits in the xsave header, indicating the + * presence of FP and SSE state. + */ + if (cpu_has_xsave) + target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE; + return ret; } @@ -395,6 +421,12 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, if (!ret) convert_to_fxsr(target, &env); + /* + * update the header bit in the xsave header, indicating the + * presence of FP. + */ + if (cpu_has_xsave) + target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP; return ret; } @@ -407,7 +439,6 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf) struct task_struct *tsk = current; struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave; - unlazy_fpu(tsk); fp->status = fp->swd; if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct))) return -1; @@ -421,8 +452,6 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf) struct user_i387_ia32_struct env; int err = 0; - unlazy_fpu(tsk); - convert_from_fxsr(&env, tsk); if (__copy_to_user(buf, &env, sizeof(env))) return -1; @@ -432,16 +461,40 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf) if (err) return -1; - if (__copy_to_user(&buf->_fxsr_env[0], fx, - sizeof(struct i387_fxsave_struct))) + if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size)) return -1; return 1; } -int save_i387_ia32(struct _fpstate_ia32 __user *buf) +static int save_i387_xsave(void __user *buf) +{ + struct _fpstate_ia32 __user *fx = buf; + int err = 0; + + if (save_i387_fxsave(fx) < 0) + return -1; + + err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32, + sizeof(struct _fpx_sw_bytes)); + err |= __put_user(FP_XSTATE_MAGIC2, + (__u32 __user *) (buf + sig_xstate_ia32_size + - FP_XSTATE_MAGIC2_SIZE)); + if (err) + return -1; + + return 1; +} + +int save_i387_xstate_ia32(void __user *buf) { + struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf; + struct task_struct *tsk = current; + if (!used_math()) return 0; + + if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size)) + return -EACCES; /* * This will cause a "finit" to be triggered by the next * attempted FPU operation by the 'current' process. @@ -451,13 +504,17 @@ int save_i387_ia32(struct _fpstate_ia32 __user *buf) if (!HAVE_HWFP) { return fpregs_soft_get(current, NULL, 0, sizeof(struct user_i387_ia32_struct), - NULL, buf) ? -1 : 1; + NULL, fp) ? -1 : 1; } + unlazy_fpu(tsk); + + if (cpu_has_xsave) + return save_i387_xsave(fp); if (cpu_has_fxsr) - return save_i387_fxsave(buf); + return save_i387_fxsave(fp); else - return save_i387_fsave(buf); + return save_i387_fsave(fp); } static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf) @@ -468,14 +525,15 @@ static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf) sizeof(struct i387_fsave_struct)); } -static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) +static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf, + unsigned int size) { struct task_struct *tsk = current; struct user_i387_ia32_struct env; int err; err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0], - sizeof(struct i387_fxsave_struct)); + size); /* mxcsr reserved bits must be masked to zero for security reasons */ tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask; if (err || __copy_from_user(&env, buf, sizeof(env))) @@ -485,14 +543,69 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) return 0; } -int restore_i387_ia32(struct _fpstate_ia32 __user *buf) +static int restore_i387_xsave(void __user *buf) +{ + struct _fpx_sw_bytes fx_sw_user; + struct _fpstate_ia32 __user *fx_user = + ((struct _fpstate_ia32 __user *) buf); + struct i387_fxsave_struct __user *fx = + (struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0]; + struct xsave_hdr_struct *xsave_hdr = + ¤t->thread.xstate->xsave.xsave_hdr; + u64 mask; + int err; + + if (check_for_xstate(fx, buf, &fx_sw_user)) + goto fx_only; + + mask = fx_sw_user.xstate_bv; + + err = restore_i387_fxsave(buf, fx_sw_user.xstate_size); + + xsave_hdr->xstate_bv &= pcntxt_mask; + /* + * These bits must be zero. + */ + xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0; + + /* + * Init the state that is not present in the memory layout + * and enabled by the OS. + */ + mask = ~(pcntxt_mask & ~mask); + xsave_hdr->xstate_bv &= mask; + + return err; +fx_only: + /* + * Couldn't find the extended state information in the memory + * layout. Restore the FP/SSE and init the other extended state + * enabled by the OS. + */ + xsave_hdr->xstate_bv = XSTATE_FPSSE; + return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct)); +} + +int restore_i387_xstate_ia32(void __user *buf) { int err; struct task_struct *tsk = current; + struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf; if (HAVE_HWFP) clear_fpu(tsk); + if (!buf) { + if (used_math()) { + clear_fpu(tsk); + clear_used_math(); + } + + return 0; + } else + if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size)) + return -EACCES; + if (!used_math()) { err = init_fpu(tsk); if (err) @@ -500,14 +613,17 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf) } if (HAVE_HWFP) { - if (cpu_has_fxsr) - err = restore_i387_fxsave(buf); + if (cpu_has_xsave) + err = restore_i387_xsave(buf); + else if (cpu_has_fxsr) + err = restore_i387_fxsave(fp, sizeof(struct + i387_fxsave_struct)); else - err = restore_i387_fsave(buf); + err = restore_i387_fsave(fp); } else { err = fpregs_soft_set(current, NULL, 0, sizeof(struct user_i387_ia32_struct), - NULL, buf) != 0; + NULL, fp) != 0; } set_used_math(); diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index dc92b49d9204..4b8a53d841f7 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -282,6 +282,30 @@ static int __init i8259A_init_sysfs(void) device_initcall(i8259A_init_sysfs); +void mask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void unmask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + void init_8259A(int auto_eoi) { unsigned long flags; diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 09cddb57bec4..e710289f673e 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -46,10 +46,13 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/setup.h> #include <mach_apic.h> #include <mach_apicdef.h> +#define __apicdebuginit(type) static type __init + int (*ioapic_renumber_irq)(int ioapic, int irq); atomic_t irq_mis_count; @@ -1341,7 +1344,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, ioapic_write_entry(apic, pin, entry); } -void __init print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -1456,9 +1460,7 @@ void __init print_IO_APIC(void) return; } -#if 0 - -static void print_APIC_bitfield(int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1479,9 +1481,10 @@ static void print_APIC_bitfield(int base) } } -void /*__init*/ print_local_APIC(void *dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + u64 icr; if (apic_verbosity == APIC_QUIET) return; @@ -1490,7 +1493,7 @@ void /*__init*/ print_local_APIC(void *dummy) smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, - GET_APIC_ID(read_apic_id())); + GET_APIC_ID(v)); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1532,10 +1535,9 @@ void /*__init*/ print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC ESR: %08x\n", v); } - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1563,12 +1565,12 @@ void /*__init*/ print_local_APIC(void *dummy) printk("\n"); } -void print_all_local_APICs(void) +__apicdebuginit(void) print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1); } -void /*__init*/ print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1600,7 +1602,17 @@ void /*__init*/ print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + static void __init enable_IO_APIC(void) { @@ -1698,8 +1710,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(read_apic_id()); + entry.dest.physical.physical_dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1725,10 +1736,8 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; -#ifdef CONFIG_X86_NUMAQ - if (found_numaq) + if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) return; -#endif /* * Don't check I/O APIC IDs for xAPIC systems. They have @@ -2329,8 +2338,6 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 61a83b70c18f..a1bec2969c6a 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -37,6 +37,7 @@ #include <acpi/acpi_bus.h> #endif #include <linux/bootmem.h> +#include <linux/dmar.h> #include <asm/idle.h> #include <asm/io.h> @@ -49,10 +50,13 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/irq_remapping.h> #include <mach_ipi.h> #include <mach_apic.h> +#define __apicdebuginit(type) static type __init + struct irq_cfg { cpumask_t domain; cpumask_t old_domain; @@ -87,8 +91,6 @@ int first_system_vector = 0xfe; char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; -#define __apicdebuginit __init - int sis_apic_bug; /* not actually supported, dummy for compile */ static int no_timer_check; @@ -108,6 +110,9 @@ static DEFINE_SPINLOCK(vector_lock); */ int nr_ioapic_registers[MAX_IO_APICS]; +/* I/O APIC RTE contents at the OS boot up */ +struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; + /* I/O APIC entries */ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; @@ -303,7 +308,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) pin = entry->pin; if (pin == -1) break; - io_apic_write(apic, 0x11 + pin*2, dest); + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; @@ -440,6 +450,69 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +/* + * Saves and masks all the unmasked IO-APIC RTE's + */ +int save_mask_IO_APIC_setup(void) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + int apic, pin; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + + for (apic = 0; apic < nr_ioapics; apic++) { + early_ioapic_entries[apic] = + kzalloc(sizeof(struct IO_APIC_route_entry) * + nr_ioapic_registers[apic], GFP_KERNEL); + if (!early_ioapic_entries[apic]) + return -ENOMEM; + } + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + + entry = early_ioapic_entries[apic][pin] = + ioapic_read_entry(apic, pin); + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + } + } + return 0; +} + +void restore_IO_APIC_setup(void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + ioapic_write_entry(apic, pin, + early_ioapic_entries[apic][pin]); +} + +void reinit_intr_remapped_IO_APIC(int intr_remapping) +{ + /* + * for now plain restore of previous settings. + * TBD: In the case of OS enabling interrupt-remapping, + * IO-APIC RTE's need to be setup to point to interrupt-remapping + * table entries. for now, do a plain restore, and wait for + * the setup_IO_APIC_irqs() to do proper initialization. + */ + restore_IO_APIC_setup(); +} + int skip_ioapic_setup; int ioapic_force; @@ -839,18 +912,98 @@ void __setup_vector_irq(int cpu) } static struct irq_chip ioapic_chip; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip; +#endif static void ioapic_register_intr(int irq, unsigned long trigger) { - if (trigger) { + if (trigger) irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { + else irq_desc[irq].status &= ~IRQ_LEVEL; + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + irq_desc[irq].status |= IRQ_MOVE_PCNTXT; + if (trigger) + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_edge_irq, "edge"); + return; + } +#endif + if (trigger) + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); +} + +static int setup_ioapic_entry(int apic, int irq, + struct IO_APIC_route_entry *entry, + unsigned int destination, int trigger, + int polarity, int vector) +{ + /* + * add it to the IO-APIC irq-routing table: + */ + memset(entry,0,sizeof(*entry)); + +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_ioapic_to_ir(apic); + struct irte irte; + struct IR_IO_APIC_route_entry *ir_entry = + (struct IR_IO_APIC_route_entry *) entry; + int index; + + if (!iommu) + panic("No mapping iommu for ioapic %d\n", apic); + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + panic("Failed to allocate IRTE for ioapic %d\n", apic); + + memset(&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = trigger; + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = vector; + irte.dest_id = IRTE_DEST(destination); + + modify_irte(irq, &irte); + + ir_entry->index2 = (index >> 15) & 0x1; + ir_entry->zero = 0; + ir_entry->format = 1; + ir_entry->index = (index & 0x7fff); + } else +#endif + { + entry->delivery_mode = INT_DELIVERY_MODE; + entry->dest_mode = INT_DEST_MODE; + entry->dest = destination; } + + entry->mask = 0; /* enable IRQ */ + entry->trigger = trigger; + entry->polarity = polarity; + entry->vector = vector; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry->mask = 1; + return 0; } static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, @@ -875,24 +1028,15 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest = cpu_mask_to_apicid(mask); - entry.mask = 0; /* enable IRQ */ - entry.trigger = trigger; - entry.polarity = polarity; - entry.vector = cfg->vector; - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry.mask = 1; + if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, + cpu_mask_to_apicid(mask), trigger, polarity, + cfg->vector)) { + printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mp_ioapics[apic].mp_apicid, pin); + __clear_irq_vector(irq); + return; + } ioapic_register_intr(irq, trigger); if (irq < 16) @@ -944,6 +1088,9 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, { struct IO_APIC_route_entry entry; + if (intr_remapping_enabled) + return; + memset(&entry, 0, sizeof(entry)); /* @@ -970,7 +1117,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, ioapic_write_entry(apic, pin, entry); } -void __apicdebuginit print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -1064,9 +1212,7 @@ void __apicdebuginit print_IO_APIC(void) return; } -#if 0 - -static __apicdebuginit void print_APIC_bitfield (int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1087,9 +1233,10 @@ static __apicdebuginit void print_APIC_bitfield (int base) } } -void __apicdebuginit print_local_APIC(void * dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + unsigned long icr; if (apic_verbosity == APIC_QUIET) return; @@ -1097,7 +1244,7 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1133,10 +1280,9 @@ void __apicdebuginit print_local_APIC(void * dummy) v = apic_read(APIC_ESR); printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1164,12 +1310,12 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +__apicdebuginit(void) print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1); } -void __apicdebuginit print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1201,7 +1347,17 @@ void __apicdebuginit print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + void __init enable_IO_APIC(void) { @@ -1291,7 +1447,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest = GET_APIC_ID(read_apic_id()); + entry.dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1397,6 +1553,147 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP + +#ifdef CONFIG_INTR_REMAP +static void ir_irq_migration(struct work_struct *work); + +static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration); + +/* + * Migrate the IO-APIC irq in the presence of intr-remapping. + * + * For edge triggered, irq migration is a simple atomic update(of vector + * and cpu destination) of IRTE and flush the hardware cache. + * + * For level triggered, we need to modify the io-apic RTE aswell with the update + * vector information, along with modifying IRTE with vector and destination. + * So irq migration for level triggered is little bit more complex compared to + * edge triggered migration. But the good news is, we use the same algorithm + * for level triggered migration as we have today, only difference being, + * we now initiate the irq migration from process context instead of the + * interrupt context. + * + * In future, when we do a directed EOI (combined with cpu EOI broadcast + * suppression) to the IO-APIC, level triggered irq migration will also be + * as simple as edge triggered migration and we can do the irq migration + * with a simple atomic update to IO-APIC RTE. + */ +static void migrate_ioapic_irq(int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct irq_desc *desc = irq_desc + irq; + cpumask_t tmp, cleanup_mask; + struct irte irte; + int modify_ioapic_rte = desc->status & IRQ_LEVEL; + unsigned int dest; + unsigned long flags; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + if (modify_ioapic_rte) { + spin_lock_irqsave(&ioapic_lock, flags); + __target_IO_APIC_irq(irq, dest, cfg->vector); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * Modified the IRTE and flushes the Interrupt entry cache. + */ + modify_irte(irq, &irte); + + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} + +static int migrate_irq_remapped_level(int irq) +{ + int ret = -1; + + mask_IO_APIC_irq(irq); + + if (io_apic_level_ack_pending(irq)) { + /* + * Interrupt in progress. Migrating irq now will change the + * vector information in the IO-APIC RTE and that will confuse + * the EOI broadcast performed by cpu. + * So, delay the irq migration to the next instance. + */ + schedule_delayed_work(&ir_migration_work, 1); + goto unmask; + } + + /* everthing is clear. we have right of way */ + migrate_ioapic_irq(irq, irq_desc[irq].pending_mask); + + ret = 0; + irq_desc[irq].status &= ~IRQ_MOVE_PENDING; + cpus_clear(irq_desc[irq].pending_mask); + +unmask: + unmask_IO_APIC_irq(irq); + return ret; +} + +static void ir_irq_migration(struct work_struct *work) +{ + int irq; + + for (irq = 0; irq < NR_IRQS; irq++) { + struct irq_desc *desc = irq_desc + irq; + if (desc->status & IRQ_MOVE_PENDING) { + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->chip->set_affinity || + !(desc->status & IRQ_MOVE_PENDING)) { + desc->status &= ~IRQ_MOVE_PENDING; + spin_unlock_irqrestore(&desc->lock, flags); + continue; + } + + desc->chip->set_affinity(irq, + irq_desc[irq].pending_mask); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* + * Migrates the IRQ destination in the process context. + */ +static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + if (irq_desc[irq].status & IRQ_LEVEL) { + irq_desc[irq].status |= IRQ_MOVE_PENDING; + irq_desc[irq].pending_mask = mask; + migrate_irq_remapped_level(irq); + return; + } + + migrate_ioapic_irq(irq, mask); +} +#endif + asmlinkage void smp_irq_move_cleanup_interrupt(void) { unsigned vector, me; @@ -1453,6 +1750,17 @@ static void irq_complete_move(unsigned int irq) #else static inline void irq_complete_move(unsigned int irq) {} #endif +#ifdef CONFIG_INTR_REMAP +static void ack_x2apic_level(unsigned int irq) +{ + ack_x2APIC_irq(); +} + +static void ack_x2apic_edge(unsigned int irq) +{ + ack_x2APIC_irq(); +} +#endif static void ack_apic_edge(unsigned int irq) { @@ -1527,6 +1835,21 @@ static struct irq_chip ioapic_chip __read_mostly = { .retrigger = ioapic_retrigger_irq, }; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip __read_mostly = { + .name = "IR-IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_x2apic_edge, + .eoi = ack_x2apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ir_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; +#endif + static inline void init_IO_APIC_traps(void) { int irq; @@ -1712,6 +2035,8 @@ static inline void __init check_timer(void) * 8259A. */ if (pin1 == -1) { + if (intr_remapping_enabled) + panic("BIOS bug: timer not connected to IO-APIC"); pin1 = pin2; apic1 = apic2; no_pin1 = 1; @@ -1738,6 +2063,8 @@ static inline void __init check_timer(void) clear_IO_APIC_pin(0, pin1); goto out; } + if (intr_remapping_enabled) + panic("timer doesn't work through Interrupt-remapped IO-APIC"); clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " @@ -1854,8 +2181,6 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } struct sysfs_ioapic_data { @@ -1977,6 +2302,9 @@ void destroy_irq(unsigned int irq) dynamic_irq_cleanup(irq); +#ifdef CONFIG_INTR_REMAP + free_irte(irq); +#endif spin_lock_irqsave(&vector_lock, flags); __clear_irq_vector(irq); spin_unlock_irqrestore(&vector_lock, flags); @@ -1995,11 +2323,42 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms tmp = TARGET_CPUS; err = assign_irq_vector(irq, tmp); - if (!err) { - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); + if (err) + return err; + + cpus_and(tmp, cfg->domain, tmp); + dest = cpu_mask_to_apicid(tmp); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irte irte; + int ir_index; + u16 sub_handle; + + ir_index = map_irq_to_irte_handle(irq, &sub_handle); + BUG_ON(ir_index == -1); + + memset (&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = 0; /* edge */ + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + modify_irte(irq, &irte); msg->address_hi = MSI_ADDR_BASE_HI; + msg->data = sub_handle; + msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | + MSI_ADDR_IR_SHV | + MSI_ADDR_IR_INDEX1(ir_index) | + MSI_ADDR_IR_INDEX2(ir_index); + } else +#endif + { + msg->address_hi = MSI_ADDR_BASE_HI; msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? @@ -2049,6 +2408,55 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) write_msi_msg(irq, &msg); irq_desc[irq].affinity = mask; } + +#ifdef CONFIG_INTR_REMAP +/* + * Migrate the MSI irq to another cpumask. This migration is + * done in the process context using interrupt-remapping hardware. + */ +static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned int dest; + cpumask_t tmp, cleanup_mask; + struct irte irte; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * atomically update the IRTE with the new destination and vector. + */ + modify_irte(irq, &irte); + + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} +#endif #endif /* CONFIG_SMP */ /* @@ -2066,26 +2474,157 @@ static struct irq_chip msi_chip = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +#ifdef CONFIG_INTR_REMAP +static struct irq_chip msi_ir_chip = { + .name = "IR-PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_x2apic_edge, +#ifdef CONFIG_SMP + .set_affinity = ir_set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +/* + * Map the PCI dev to the corresponding remapping hardware unit + * and allocate 'nvec' consecutive interrupt-remapping table entries + * in it. + */ +static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec) { + struct intel_iommu *iommu; + int index; + + iommu = map_dev_to_ir(dev); + if (!iommu) { + printk(KERN_ERR + "Unable to map PCI %s to iommu\n", pci_name(dev)); + return -ENOENT; + } + + index = alloc_irte(iommu, irq, nvec); + if (index < 0) { + printk(KERN_ERR + "Unable to allocate %d IRTE for PCI %s\n", nvec, + pci_name(dev)); + return -ENOSPC; + } + return index; +} +#endif + +static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq) +{ + int ret; struct msi_msg msg; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) + return ret; + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irq_desc *desc = irq_desc + irq; + /* + * irq migration in process context + */ + desc->status |= IRQ_MOVE_PCNTXT; + set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge"); + } else +#endif + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); + + return 0; +} + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ int irq, ret; + irq = create_irq(); if (irq < 0) return irq; - ret = msi_compose_msg(dev, irq, &msg); +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + + ret = msi_alloc_irte(dev, irq, 1); + if (ret < 0) + goto error; +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); if (ret < 0) { destroy_irq(irq); return ret; } + return 0; - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); +#ifdef CONFIG_INTR_REMAP +error: + destroy_irq(irq); + return ret; +#endif +} - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int irq, ret, sub_handle; + struct msi_desc *desc; +#ifdef CONFIG_INTR_REMAP + struct intel_iommu *iommu = 0; + int index = 0; +#endif + + sub_handle = 0; + list_for_each_entry(desc, &dev->msi_list, list) { + irq = create_irq(); + if (irq < 0) + return irq; +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + if (!sub_handle) { + /* + * allocate the consecutive block of IRTE's + * for 'nvec' + */ + index = msi_alloc_irte(dev, irq, nvec); + if (index < 0) { + ret = index; + goto error; + } + } else { + iommu = map_dev_to_ir(dev); + if (!iommu) { + ret = -ENOENT; + goto error; + } + /* + * setup the mapping between the irq and the IRTE + * base index, the sub_handle pointing to the + * appropriate interrupt remap table entry. + */ + set_irte_irq(irq, iommu, index, sub_handle); + } +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); + if (ret < 0) + goto error; + sub_handle++; + } return 0; + +error: + destroy_irq(irq); + return ret; } void arch_teardown_msi_irq(unsigned int irq) @@ -2333,6 +2872,10 @@ void __init setup_ioapic_dest(void) setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); +#ifdef CONFIG_INTR_REMAP + else if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif else set_ioapic_affinity_irq(irq, TARGET_CPUS); } diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index d66914287ee1..9200a1e2752d 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -74,6 +74,15 @@ void __init init_ISA_irqs (void) } } +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + /* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); @@ -98,6 +107,46 @@ void __init native_init_IRQ(void) set_intr_gate(vector, interrupt[i]); } +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) + /* + * IRQ0 must be given a fixed assignment and initialized, + * because it's used before the IO-APIC is set up. + */ + set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); + + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPI for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for single call function */ + set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif + + if (!acpi_ioapic) + setup_irq(2, &irq2); + /* setup after call gates are initialised (usually add in * the architecture specific gates) */ diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b3fb430725cb..f98f4e1dba09 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) generic_bigsmp_probe(); #endif +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif if (!num_processors) printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index eecc8c18f010..4caff39078e0 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -229,6 +229,12 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, } } +static int __init numaq_setup_ioapic_ids(void) +{ + /* so can skip it */ + return 1; +} + static struct x86_quirks numaq_x86_quirks __initdata = { .arch_pre_time_init = numaq_pre_time_init, .arch_time_init = NULL, @@ -243,6 +249,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = { .mpc_oem_bus_info = mpc_oem_bus_info, .mpc_oem_pci_bus = mpc_oem_pci_bus, .smp_read_mpc_oem = smp_read_mpc_oem, + .setup_ioapic_ids = numaq_setup_ioapic_ids, }; void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index e2f43768723a..6b0bb73998dd 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -374,8 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = { struct pv_apic_ops pv_apic_ops = { #ifdef CONFIG_X86_LOCAL_APIC - .apic_write = native_apic_write, - .apic_read = native_apic_read, .setup_boot_clock = setup_boot_APIC_clock, .setup_secondary_clock = setup_secondary_APIC_clock, .startup_ipi_hook = paravirt_nop, diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ec7a2ba9bce8..c622772744d8 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -15,7 +15,6 @@ unsigned long idle_nomwait; EXPORT_SYMBOL(idle_nomwait); struct kmem_cache *task_xstate_cachep; -static int force_mwait __cpuinitdata; int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 141efab52400..46c98efbbf8d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -758,6 +758,8 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; + if (cpu_has_x2apic) + check_x2apic(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ diff --git a/arch/x86/kernel/sigframe.h b/arch/x86/kernel/sigframe.h index 8b4956e800ac..cc673aa55ce4 100644 --- a/arch/x86/kernel/sigframe.h +++ b/arch/x86/kernel/sigframe.h @@ -3,9 +3,18 @@ struct sigframe { char __user *pretcode; int sig; struct sigcontext sc; - struct _fpstate fpstate; + /* + * fpstate is unused. fpstate is moved/allocated after + * retcode[] below. This movement allows to have the FP state and the + * future state extensions (xsave) stay together. + * And at the same time retaining the unused fpstate, prevents changing + * the offset of extramask[] in the sigframe and thus prevent any + * legacy application accessing/modifying it. + */ + struct _fpstate fpstate_unused; unsigned long extramask[_NSIG_WORDS-1]; char retcode[8]; + /* fp state follows here */ }; struct rt_sigframe { @@ -15,14 +24,15 @@ struct rt_sigframe { void __user *puc; struct siginfo info; struct ucontext uc; - struct _fpstate fpstate; char retcode[8]; + /* fp state follows here */ }; #else struct rt_sigframe { char __user *pretcode; struct ucontext uc; struct siginfo info; + /* fp state follows here */ }; int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c index 2a2435d3037d..b21070ea33a4 100644 --- a/arch/x86/kernel/signal_32.c +++ b/arch/x86/kernel/signal_32.c @@ -161,28 +161,14 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, } { - struct _fpstate __user *buf; + void __user *buf; err |= __get_user(buf, &sc->fpstate); - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387(buf); - } else { - struct task_struct *me = current; - - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } + err |= restore_i387_xstate(buf); } err |= __get_user(*pax, &sc->ax); return err; - -badframe: - return 1; } asmlinkage unsigned long sys_sigreturn(unsigned long __unused) @@ -264,7 +250,7 @@ badframe: * Set up a signal frame. */ static int -setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, +setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate, struct pt_regs *regs, unsigned long mask) { int tmp, err = 0; @@ -291,7 +277,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, err |= __put_user(regs->sp, &sc->sp_at_signal); err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss); - tmp = save_i387(fpstate); + tmp = save_i387_xstate(fpstate); if (tmp < 0) err = 1; else @@ -308,7 +294,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, * Determine which stack to use.. */ static inline void __user * -get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size, + void **fpstate) { unsigned long sp; @@ -334,6 +321,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) sp = (unsigned long) ka->sa.sa_restorer; } + if (used_math()) { + sp = sp - sig_xstate_size; + *fpstate = (struct _fpstate *) sp; + } + sp -= frame_size; /* * Align the stack pointer according to the i386 ABI, @@ -352,8 +344,9 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, void __user *restorer; int err = 0; int usig; + void __user *fpstate = NULL; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; @@ -368,7 +361,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, if (err) goto give_sigsegv; - err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]); + err = setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]); if (err) goto give_sigsegv; @@ -429,8 +422,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, void __user *restorer; int err = 0; int usig; + void __user *fpstate = NULL; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; @@ -449,13 +443,16 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + if (cpu_has_xsave) + err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); + else + err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate, + err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate, regs, set->sig[0]); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index 694aa888bb19..823a55bf8c39 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -53,69 +53,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, } /* - * Signal frame handlers. - */ - -static inline int save_i387(struct _fpstate __user *buf) -{ - struct task_struct *tsk = current; - int err = 0; - - BUILD_BUG_ON(sizeof(struct user_i387_struct) != - sizeof(tsk->thread.xstate->fxsave)); - - if ((unsigned long)buf % 16) - printk("save_i387: bad fpstate %p\n", buf); - - if (!used_math()) - return 0; - clear_used_math(); /* trigger finit */ - if (task_thread_info(tsk)->status & TS_USEDFPU) { - err = save_i387_checking((struct i387_fxsave_struct __user *) - buf); - if (err) - return err; - task_thread_info(tsk)->status &= ~TS_USEDFPU; - stts(); - } else { - if (__copy_to_user(buf, &tsk->thread.xstate->fxsave, - sizeof(struct i387_fxsave_struct))) - return -1; - } - return 1; -} - -/* - * This restores directly out of user space. Exceptions are handled. - */ -static inline int restore_i387(struct _fpstate __user *buf) -{ - struct task_struct *tsk = current; - int err; - - if (!used_math()) { - err = init_fpu(tsk); - if (err) - return err; - } - - if (!(task_thread_info(current)->status & TS_USEDFPU)) { - clts(); - task_thread_info(current)->status |= TS_USEDFPU; - } - err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf); - if (unlikely(err)) { - /* - * Encountered an error while doing the restore from the - * user buffer, clear the fpu state. - */ - clear_fpu(tsk); - clear_used_math(); - } - return err; -} - -/* * Do a signal return; undo the signal stack. */ static int @@ -159,25 +96,11 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, { struct _fpstate __user *buf; err |= __get_user(buf, &sc->fpstate); - - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387(buf); - } else { - struct task_struct *me = current; - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } + err |= restore_i387_xstate(buf); } err |= __get_user(*pax, &sc->ax); return err; - -badframe: - return 1; } asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) @@ -269,26 +192,23 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) sp = current->sas_ss_sp + current->sas_ss_size; } - return (void __user *)round_down(sp - size, 16); + return (void __user *)round_down(sp - size, 64); } static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; - struct _fpstate __user *fp = NULL; + void __user *fp = NULL; int err = 0; struct task_struct *me = current; if (used_math()) { - fp = get_stack(ka, regs, sizeof(struct _fpstate)); + fp = get_stack(ka, regs, sig_xstate_size); frame = (void __user *)round_down( (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; - if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) - goto give_sigsegv; - - if (save_i387(fp) < 0) + if (save_i387_xstate(fp) < 0) err |= -1; } else frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; @@ -303,7 +223,10 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, } /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); + if (cpu_has_xsave) + err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); + else + err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->sp), diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 4e7ccb0e2a9b..9056f7e272c0 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -123,7 +123,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); static atomic_t init_deasserted; -static int boot_cpu_logical_apicid; /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -165,6 +164,8 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 +static int boot_cpu_logical_apicid; + u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -210,7 +211,7 @@ static void __cpuinit smp_callin(void) /* * (This works even if the APIC is not enabled.) */ - phys_id = GET_APIC_ID(read_apic_id()); + phys_id = read_apic_id(); cpuid = smp_processor_id(); if (cpu_isset(cpuid, cpu_callin_map)) { panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__, @@ -551,8 +552,7 @@ static inline void __inquire_remote_apic(int apicid) printk(KERN_CONT "a previous APIC delivery may have failed\n"); - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); + apic_icr_write(APIC_DM_REMRD | regs[i], apicid); timeout = 0; do { @@ -584,11 +584,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) int maxlvt; /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); + apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -641,13 +639,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) /* * Turn INIT on target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* * Send IPI */ - apic_write(APIC_ICR, - APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT, + phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -657,10 +653,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) pr_debug("Deasserting INIT.\n"); /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Send IPI */ - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -703,11 +697,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) */ /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12)); + apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12), + phys_apicid); /* * Give the other CPU some time to accept the IPI. @@ -1176,10 +1169,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ +#ifdef CONFIG_X86_32 boot_cpu_logical_apicid = logical_smp_processor_id(); +#endif current_thread_info()->cpu = 0; /* needed? */ set_cpu_sibling_map(0); +#ifdef CONFIG_X86_64 + enable_IR_x2apic(); + setup_apic_routing(); +#endif + if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); @@ -1187,9 +1187,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) } preempt_disable(); - if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) { + if (read_apic_id() != boot_cpu_physical_apicid) { panic("Boot APIC ID in local APIC unexpected (%d vs %d)", - GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid); + read_apic_id(), boot_cpu_physical_apicid); /* Or can we switch back to PIC here? */ } preempt_enable(); diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c index d67ce5f044ba..7b987852e876 100644 --- a/arch/x86/kernel/summit_32.c +++ b/arch/x86/kernel/summit_32.c @@ -30,7 +30,7 @@ #include <linux/init.h> #include <asm/io.h> #include <asm/bios_ebda.h> -#include <asm/mach-summit/mach_mpparse.h> +#include <asm/summit/mpparse.h> static struct rio_table_hdr *rio_table_hdr __initdata; static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index 03df8e45e5a1..da5a5964fccb 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -1228,7 +1228,6 @@ void __init trap_init(void) set_bit(SYSCALL_VECTOR, used_vectors); - init_thread_xstate(); /* * Should be a barrier for any external CPU state: */ diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 7a31f104bef9..2887a789e38f 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -1138,7 +1138,7 @@ asmlinkage void math_state_restore(void) /* * Paranoid restore. send a SIGSEGV if we fail to restore the state. */ - if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) { + if (unlikely(restore_fpu_checking(me))) { stts(); force_sig(SIGSEGV, me); return; @@ -1179,10 +1179,6 @@ void __init trap_init(void) set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall); #endif /* - * initialize the per thread extended state: - */ - init_thread_xstate(); - /* * Should be a barrier for any external CPU state: */ cpu_init(); diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 8c9ad02af5a2..8b6c393ab9fd 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -905,8 +905,8 @@ static inline int __init activate_vmi(void) #endif #ifdef CONFIG_X86_LOCAL_APIC - para_fill(pv_apic_ops.apic_read, APICRead); - para_fill(pv_apic_ops.apic_write, APICWrite); + para_fill(apic_ops->read, APICRead); + para_fill(apic_ops->write, APICWrite); #endif /* diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index af5bdad84604..a9b8560adbc2 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -140,10 +140,10 @@ SECTIONS *(.con_initcall.init) __con_initcall_end = .; } - .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { - __x86cpuvendor_start = .; - *(.x86cpuvendor.init) - __x86cpuvendor_end = .; + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; } SECURITY_INIT . = ALIGN(4); @@ -180,6 +180,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index 63e5c1a22e88..201e81a91a95 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -168,13 +168,12 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; - . = ALIGN(16); - __x86cpuvendor_start = .; - .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { - *(.x86cpuvendor.init) + __x86_cpu_dev_start = .; + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + *(.x86_cpu_dev.init) } - __x86cpuvendor_end = .; SECURITY_INIT + __x86_cpu_dev_end = .; . = ALIGN(8); .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c new file mode 100644 index 000000000000..07713d64debe --- /dev/null +++ b/arch/x86/kernel/xsave.c @@ -0,0 +1,316 @@ +/* + * xsave/xrstor support. + * + * Author: Suresh Siddha <suresh.b.siddha@intel.com> + */ +#include <linux/bootmem.h> +#include <linux/compat.h> +#include <asm/i387.h> +#ifdef CONFIG_IA32_EMULATION +#include <asm/sigcontext32.h> +#endif +#include <asm/xcr.h> + +/* + * Supported feature mask by the CPU and the kernel. + */ +u64 pcntxt_mask; + +struct _fpx_sw_bytes fx_sw_reserved; +#ifdef CONFIG_IA32_EMULATION +struct _fpx_sw_bytes fx_sw_reserved_ia32; +#endif + +/* + * Check for the presence of extended state information in the + * user fpstate pointer in the sigcontext. + */ +int check_for_xstate(struct i387_fxsave_struct __user *buf, + void __user *fpstate, + struct _fpx_sw_bytes *fx_sw_user) +{ + int min_xstate_size = sizeof(struct i387_fxsave_struct) + + sizeof(struct xsave_hdr_struct); + unsigned int magic2; + int err; + + err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0], + sizeof(struct _fpx_sw_bytes)); + + if (err) + return err; + + /* + * First Magic check failed. + */ + if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1) + return -1; + + /* + * Check for error scenarios. + */ + if (fx_sw_user->xstate_size < min_xstate_size || + fx_sw_user->xstate_size > xstate_size || + fx_sw_user->xstate_size > fx_sw_user->extended_size) + return -1; + + err = __get_user(magic2, (__u32 *) (((void *)fpstate) + + fx_sw_user->extended_size - + FP_XSTATE_MAGIC2_SIZE)); + /* + * Check for the presence of second magic word at the end of memory + * layout. This detects the case where the user just copied the legacy + * fpstate layout with out copying the extended state information + * in the memory layout. + */ + if (err || magic2 != FP_XSTATE_MAGIC2) + return -1; + + return 0; +} + +#ifdef CONFIG_X86_64 +/* + * Signal frame handlers. + */ + +int save_i387_xstate(void __user *buf) +{ + struct task_struct *tsk = current; + int err = 0; + + if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size)) + return -EACCES; + + BUG_ON(sig_xstate_size < xstate_size); + + if ((unsigned long)buf % 64) + printk("save_i387_xstate: bad fpstate %p\n", buf); + + if (!used_math()) + return 0; + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { + /* + * Start with clearing the user buffer. This will present a + * clean context for the bytes not touched by the fxsave/xsave. + */ + __clear_user(buf, sig_xstate_size); + + if (task_thread_info(tsk)->status & TS_XSAVE) + err = xsave_user(buf); + else + err = fxsave_user(buf); + + if (err) + return err; + task_thread_info(tsk)->status &= ~TS_USEDFPU; + stts(); + } else { + if (__copy_to_user(buf, &tsk->thread.xstate->fxsave, + xstate_size)) + return -1; + } + + if (task_thread_info(tsk)->status & TS_XSAVE) { + struct _fpstate __user *fx = buf; + + err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved, + sizeof(struct _fpx_sw_bytes)); + + err |= __put_user(FP_XSTATE_MAGIC2, + (__u32 __user *) (buf + sig_xstate_size + - FP_XSTATE_MAGIC2_SIZE)); + } + + return 1; +} + +/* + * Restore the extended state if present. Otherwise, restore the FP/SSE + * state. + */ +int restore_user_xstate(void __user *buf) +{ + struct _fpx_sw_bytes fx_sw_user; + u64 mask; + int err; + + if (((unsigned long)buf % 64) || + check_for_xstate(buf, buf, &fx_sw_user)) + goto fx_only; + + mask = fx_sw_user.xstate_bv; + + /* + * restore the state passed by the user. + */ + err = xrestore_user(buf, mask); + if (err) + return err; + + /* + * init the state skipped by the user. + */ + mask = pcntxt_mask & ~mask; + + xrstor_state(init_xstate_buf, mask); + + return 0; + +fx_only: + /* + * couldn't find the extended state information in the + * memory layout. Restore just the FP/SSE and init all + * the other extended state. + */ + xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE); + return fxrstor_checking((__force struct i387_fxsave_struct *)buf); +} + +/* + * This restores directly out of user space. Exceptions are handled. + */ +int restore_i387_xstate(void __user *buf) +{ + struct task_struct *tsk = current; + int err = 0; + + if (!buf) { + if (used_math()) + goto clear; + return 0; + } else + if (!access_ok(VERIFY_READ, buf, sig_xstate_size)) + return -EACCES; + + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + + if (!(task_thread_info(current)->status & TS_USEDFPU)) { + clts(); + task_thread_info(current)->status |= TS_USEDFPU; + } + if (task_thread_info(tsk)->status & TS_XSAVE) + err = restore_user_xstate(buf); + else + err = fxrstor_checking((__force struct i387_fxsave_struct *) + buf); + if (unlikely(err)) { + /* + * Encountered an error while doing the restore from the + * user buffer, clear the fpu state. + */ +clear: + clear_fpu(tsk); + clear_used_math(); + } + return err; +} +#endif + +/* + * Prepare the SW reserved portion of the fxsave memory layout, indicating + * the presence of the extended state information in the memory layout + * pointed by the fpstate pointer in the sigcontext. + * This will be saved when ever the FP and extended state context is + * saved on the user stack during the signal handler delivery to the user. + */ +void prepare_fx_sw_frame(void) +{ + int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) + + FP_XSTATE_MAGIC2_SIZE; + + sig_xstate_size = sizeof(struct _fpstate) + size_extended; + +#ifdef CONFIG_IA32_EMULATION + sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended; +#endif + + memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved)); + + fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1; + fx_sw_reserved.extended_size = sig_xstate_size; + fx_sw_reserved.xstate_bv = pcntxt_mask; + fx_sw_reserved.xstate_size = xstate_size; +#ifdef CONFIG_IA32_EMULATION + memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved, + sizeof(struct _fpx_sw_bytes)); + fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size; +#endif +} + +/* + * Represents init state for the supported extended state. + */ +struct xsave_struct *init_xstate_buf; + +#ifdef CONFIG_X86_64 +unsigned int sig_xstate_size = sizeof(struct _fpstate); +#endif + +/* + * Enable the extended processor state save/restore feature + */ +void __cpuinit xsave_init(void) +{ + if (!cpu_has_xsave) + return; + + set_in_cr4(X86_CR4_OSXSAVE); + + /* + * Enable all the features that the HW is capable of + * and the Linux kernel is aware of. + */ + xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); +} + +/* + * setup the xstate image representing the init state + */ +void setup_xstate_init(void) +{ + init_xstate_buf = alloc_bootmem(xstate_size); + init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; +} + +/* + * Enable and initialize the xsave feature. + */ +void __init xsave_cntxt_init(void) +{ + unsigned int eax, ebx, ecx, edx; + + cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + pcntxt_mask = eax + ((u64)edx << 32); + + if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) { + printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n", + pcntxt_mask); + BUG(); + } + + /* + * for now OS knows only about FP/SSE + */ + pcntxt_mask = pcntxt_mask & XCNTXT_MASK; + xsave_init(); + + /* + * Recompute the context size for enabled features + */ + cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + xstate_size = ebx; + + prepare_fx_sw_frame(); + + setup_xstate_init(); + + printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, " + "cntxt size 0x%x\n", + pcntxt_mask, xstate_size); +} diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 23e8373507ad..17e25995b65b 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -331,21 +331,6 @@ enum vmcs_field { #define AR_RESERVD_MASK 0xfffe0f00 -#define MSR_IA32_VMX_BASIC 0x480 -#define MSR_IA32_VMX_PINBASED_CTLS 0x481 -#define MSR_IA32_VMX_PROCBASED_CTLS 0x482 -#define MSR_IA32_VMX_EXIT_CTLS 0x483 -#define MSR_IA32_VMX_ENTRY_CTLS 0x484 -#define MSR_IA32_VMX_MISC 0x485 -#define MSR_IA32_VMX_CR0_FIXED0 0x486 -#define MSR_IA32_VMX_CR0_FIXED1 0x487 -#define MSR_IA32_VMX_CR4_FIXED0 0x488 -#define MSR_IA32_VMX_CR4_FIXED1 0x489 -#define MSR_IA32_VMX_VMCS_ENUM 0x48a -#define MSR_IA32_VMX_PROCBASED_CTLS2 0x48b -#define MSR_IA32_VMX_EPT_VPID_CAP 0x48c - -#define MSR_IA32_FEATURE_CONTROL 0x3a #define MSR_IA32_FEATURE_CONTROL_LOCKED 0x1 #define MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED 0x4 diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index d9249a882aa5..65f0b8a47bed 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -55,6 +55,7 @@ #include <linux/lguest_launcher.h> #include <linux/virtio_console.h> #include <linux/pm.h> +#include <asm/apic.h> #include <asm/lguest.h> #include <asm/paravirt.h> #include <asm/param.h> @@ -783,14 +784,44 @@ static void lguest_wbinvd(void) * code qualifies for Advanced. It will also never interrupt anything. It * does, however, allow us to get through the Linux boot code. */ #ifdef CONFIG_X86_LOCAL_APIC -static void lguest_apic_write(unsigned long reg, u32 v) +static void lguest_apic_write(u32 reg, u32 v) { } -static u32 lguest_apic_read(unsigned long reg) +static u32 lguest_apic_read(u32 reg) { return 0; } + +static u64 lguest_apic_icr_read(void) +{ + return 0; +} + +static void lguest_apic_icr_write(u32 low, u32 id) +{ + /* Warn to see if there's any stray references */ + WARN_ON(1); +} + +static void lguest_apic_wait_icr_idle(void) +{ + return; +} + +static u32 lguest_apic_safe_wait_icr_idle(void) +{ + return 0; +} + +static struct apic_ops lguest_basic_apic_ops = { + .read = lguest_apic_read, + .write = lguest_apic_write, + .icr_read = lguest_apic_icr_read, + .icr_write = lguest_apic_icr_write, + .wait_icr_idle = lguest_apic_wait_icr_idle, + .safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle, +}; #endif /* STOP! Until an interrupt comes in. */ @@ -990,8 +1021,7 @@ __init void lguest_init(void) #ifdef CONFIG_X86_LOCAL_APIC /* apic read/write intercepts */ - pv_apic_ops.apic_write = lguest_apic_write; - pv_apic_ops.apic_read = lguest_apic_read; + apic_ops = &lguest_basic_apic_ops; #endif /* time operations */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index aa3fa4119424..55e11aa6d66c 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -17,9 +17,6 @@ ifeq ($(CONFIG_X86_32),y) lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o else obj-y += io_64.o iomap_copy_64.o - - CFLAGS_csum-partial_64.o := -funroll-loops - lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o lib-y += thunk_64.o clear_page_64.o copy_page_64.o lib-y += memmove_64.o memset_64.o diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c index 24e60944971a..9e68075544f6 100644 --- a/arch/x86/lib/usercopy_32.c +++ b/arch/x86/lib/usercopy_32.c @@ -14,6 +14,13 @@ #include <asm/uaccess.h> #include <asm/mmx.h> +#ifdef CONFIG_X86_INTEL_USERCOPY +/* + * Alignment at which movsl is preferred for bulk memory copies. + */ +struct movsl_mask movsl_mask __read_mostly; +#endif + static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n) { #ifdef CONFIG_X86_INTEL_USERCOPY diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 3f2cf11f201a..37b9ae4d44c5 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -38,15 +38,6 @@ void __init pre_intr_init_hook(void) init_ISA_irqs(); } -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - /** * intr_init_hook - post gate setup interrupt initialisation * @@ -62,12 +53,6 @@ void __init intr_init_hook(void) if (x86_quirks->arch_intr_init()) return; } -#ifdef CONFIG_X86_LOCAL_APIC - apic_intr_init(); -#endif - - if (!acpi_ioapic) - setup_irq(2, &irq2); } /** diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile deleted file mode 100644 index 3ef8b43b62fc..000000000000 --- a/arch/x86/mach-es7000/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-$(CONFIG_X86_ES7000) := es7000plat.o diff --git a/arch/x86/mach-es7000/es7000.h b/arch/x86/mach-es7000/es7000.h deleted file mode 100644 index c8d5aa132fa0..000000000000 --- a/arch/x86/mach-es7000/es7000.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Written by: Garry Forsgren, Unisys Corporation - * Natalie Protasevich, Unisys Corporation - * This file contains the code to configure and interface - * with Unisys ES7000 series hardware system manager. - * - * Copyright (c) 2003 Unisys Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Unisys Corporation, Township Line & Union Meeting - * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: - * - * http://www.unisys.com - */ - -/* - * ES7000 chipsets - */ - -#define NON_UNISYS 0 -#define ES7000_CLASSIC 1 -#define ES7000_ZORRO 2 - - -#define MIP_REG 1 -#define MIP_PSAI_REG 4 - -#define MIP_BUSY 1 -#define MIP_SPIN 0xf0000 -#define MIP_VALID 0x0100000000000000ULL -#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff) - -#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) - -struct mip_reg_info { - unsigned long long mip_info; - unsigned long long delivery_info; - unsigned long long host_reg; - unsigned long long mip_reg; -}; - -struct part_info { - unsigned char type; - unsigned char length; - unsigned char part_id; - unsigned char apic_mode; - unsigned long snum; - char ptype[16]; - char sname[64]; - char pname[64]; -}; - -struct psai { - unsigned long long entry_type; - unsigned long long addr; - unsigned long long bep_addr; -}; - -struct es7000_mem_info { - unsigned char type; - unsigned char length; - unsigned char resv[6]; - unsigned long long start; - unsigned long long size; -}; - -struct es7000_oem_table { - unsigned long long hdr; - struct mip_reg_info mip; - struct part_info pif; - struct es7000_mem_info shm; - struct psai psai; -}; - -#ifdef CONFIG_ACPI - -struct oem_table { - struct acpi_table_header Header; - u32 OEMTableAddr; - u32 OEMTableSize; -}; - -extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); -#endif - -struct mip_reg { - unsigned long long off_0; - unsigned long long off_8; - unsigned long long off_10; - unsigned long long off_18; - unsigned long long off_20; - unsigned long long off_28; - unsigned long long off_30; - unsigned long long off_38; -}; - -#define MIP_SW_APIC 0x1020b -#define MIP_FUNC(VALUE) (VALUE & 0xff) - -extern int parse_unisys_oem (char *oemptr); -extern void setup_unisys(void); -extern int es7000_start_cpu(int cpu, unsigned long eip); -extern void es7000_sw_apic(void); diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile index 0dbd7803a1d5..6730f4e7c744 100644 --- a/arch/x86/mach-generic/Makefile +++ b/arch/x86/mach-generic/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_X86_NUMAQ) += numaq.o obj-$(CONFIG_X86_SUMMIT) += summit.o obj-$(CONFIG_X86_BIGSMP) += bigsmp.o obj-$(CONFIG_X86_ES7000) += es7000.o -obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/ diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c index 59d771714559..df37fc9d6a26 100644 --- a/arch/x86/mach-generic/bigsmp.c +++ b/arch/x86/mach-generic/bigsmp.c @@ -5,18 +5,17 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> -#include <linux/smp.h> #include <linux/init.h> #include <linux/dmi.h> -#include <asm/mach-bigsmp/mach_apic.h> -#include <asm/mach-bigsmp/mach_apicdef.h> -#include <asm/mach-bigsmp/mach_ipi.h> +#include <asm/bigsmp/apicdef.h> +#include <linux/smp.h> +#include <asm/bigsmp/apic.h> +#include <asm/bigsmp/ipi.h> #include <asm/mach-default/mach_mpparse.h> static int dmi_bigsmp; /* can be set by dmi scanners */ diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c index 4742626f08c4..520cca0ee04e 100644 --- a/arch/x86/mach-generic/es7000.c +++ b/arch/x86/mach-generic/es7000.c @@ -4,20 +4,19 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/smp.h> #include <linux/init.h> -#include <asm/mach-es7000/mach_apicdef.h> -#include <asm/mach-es7000/mach_apic.h> -#include <asm/mach-es7000/mach_ipi.h> -#include <asm/mach-es7000/mach_mpparse.h> -#include <asm/mach-es7000/mach_wakecpu.h> +#include <asm/es7000/apicdef.h> +#include <linux/smp.h> +#include <asm/es7000/apic.h> +#include <asm/es7000/ipi.h> +#include <asm/es7000/mpparse.h> +#include <asm/es7000/wakecpu.h> static int probe_es7000(void) { diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c index 8091e68764c4..8cf58394975e 100644 --- a/arch/x86/mach-generic/numaq.c +++ b/arch/x86/mach-generic/numaq.c @@ -4,7 +4,6 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <linux/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> @@ -12,11 +11,12 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <asm/mach-numaq/mach_apic.h> -#include <asm/mach-numaq/mach_apicdef.h> -#include <asm/mach-numaq/mach_ipi.h> -#include <asm/mach-numaq/mach_mpparse.h> -#include <asm/mach-numaq/mach_wakecpu.h> +#include <asm/numaq/apicdef.h> +#include <linux/smp.h> +#include <asm/numaq/apic.h> +#include <asm/numaq/ipi.h> +#include <asm/numaq/mpparse.h> +#include <asm/numaq/wakecpu.h> #include <asm/numaq.h> static int mps_oem_check(struct mp_config_table *mpc, char *oem, diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c index a97ea0f35b1e..6ad6b67a723d 100644 --- a/arch/x86/mach-generic/summit.c +++ b/arch/x86/mach-generic/summit.c @@ -4,19 +4,18 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/smp.h> #include <linux/init.h> -#include <asm/mach-summit/mach_apic.h> -#include <asm/mach-summit/mach_apicdef.h> -#include <asm/mach-summit/mach_ipi.h> -#include <asm/mach-summit/mach_mpparse.h> +#include <asm/summit/apicdef.h> +#include <linux/smp.h> +#include <asm/summit/apic.h> +#include <asm/summit/ipi.h> +#include <asm/summit/mpparse.h> static int probe_summit(void) { diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index fb30486c82f7..83e13f2d53d2 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -88,6 +88,62 @@ early_param("gbpages", parse_direct_gbpages_on); int after_bootmem; +unsigned long __supported_pte_mask __read_mostly = ~0UL; +EXPORT_SYMBOL_GPL(__supported_pte_mask); + +static int do_not_nx __cpuinitdata; + +/* + * noexec=on|off + * Control non-executable mappings for 64-bit processes. + * + * on Enable (default) + * off Disable + */ +static int __init nonx_setup(char *str) +{ + if (!str) + return -EINVAL; + if (!strncmp(str, "on", 2)) { + __supported_pte_mask |= _PAGE_NX; + do_not_nx = 0; + } else if (!strncmp(str, "off", 3)) { + do_not_nx = 1; + __supported_pte_mask &= ~_PAGE_NX; + } + return 0; +} +early_param("noexec", nonx_setup); + +void __cpuinit check_efer(void) +{ + unsigned long efer; + + rdmsrl(MSR_EFER, efer); + if (!(efer & EFER_NX) || do_not_nx) + __supported_pte_mask &= ~_PAGE_NX; +} + +int force_personality32; + +/* + * noexec32=on|off + * Control non executable heap for 32bit processes. + * To control the stack too use noexec=off + * + * on PROT_READ does not imply PROT_EXEC for 32-bit processes (default) + * off PROT_READ implies PROT_EXEC + */ +static int __init nonx32_setup(char *str) +{ + if (!strcmp(str, "on")) + force_personality32 &= ~READ_IMPLIES_EXEC; + else if (!strcmp(str, "off")) + force_personality32 |= READ_IMPLIES_EXEC; + return 1; +} +__setup("noexec32=", nonx32_setup); + /* * NOTE: This function is marked __ref because it calls __init function * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0. diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 19af06927fbc..1d88d2b39771 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -250,10 +250,5 @@ int __init pci_acpi_init(void) acpi_pci_irq_enable(dev); } -#ifdef CONFIG_X86_IO_APIC - if (acpi_ioapic) - print_IO_APIC(); -#endif - return 0; } diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 8791fc55e715..844df0cbbd3e 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -33,6 +33,7 @@ #include <linux/bootmem.h> #include <asm/pat.h> +#include <asm/e820.h> #include "pci.h" @@ -227,6 +228,8 @@ void __init pcibios_resource_survey(void) pcibios_allocate_bus_resources(&pci_root_buses); pcibios_allocate_resources(0); pcibios_allocate_resources(1); + + e820_reserve_resources_late(); } /** diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index d9635764ce3d..654a2234f8f3 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -209,7 +209,7 @@ static int __init pci_mmcfg_check_hostbridge(void) return name != NULL; } -static void __init pci_mmcfg_insert_resources(unsigned long resource_flags) +static void __init pci_mmcfg_insert_resources(void) { #define PCI_MMCFG_RESOURCE_NAME_LEN 19 int i; @@ -233,7 +233,7 @@ static void __init pci_mmcfg_insert_resources(unsigned long resource_flags) cfg->pci_segment); res->start = cfg->address; res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | resource_flags; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; insert_resource(&iomem_resource, res); names += PCI_MMCFG_RESOURCE_NAME_LEN; } @@ -434,11 +434,9 @@ static void __init __pci_mmcfg_init(int early) (pci_mmcfg_config[0].address == 0)) return; - if (pci_mmcfg_arch_init()) { - if (known_bridge) - pci_mmcfg_insert_resources(IORESOURCE_BUSY); + if (pci_mmcfg_arch_init()) pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - } else { + else { /* * Signal not to attempt to insert mmcfg resources because * the architecture mmcfg setup could not initialize. @@ -475,7 +473,7 @@ static int __init pci_mmcfg_late_insert_resources(void) * marked so it won't cause request errors when __request_region is * called. */ - pci_mmcfg_insert_resources(0); + pci_mmcfg_insert_resources(); return 0; } diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c index d3e083dea720..274d06082f48 100644 --- a/arch/x86/power/cpu_32.c +++ b/arch/x86/power/cpu_32.c @@ -11,6 +11,7 @@ #include <linux/suspend.h> #include <asm/mtrr.h> #include <asm/mce.h> +#include <asm/xcr.h> static struct saved_context saved_context; @@ -126,6 +127,12 @@ static void __restore_processor_state(struct saved_context *ctxt) if (boot_cpu_has(X86_FEATURE_SEP)) enable_sep_cpu(); + /* + * restore XCR0 for xsave capable cpu's. + */ + if (cpu_has_xsave) + xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); + fix_processor_context(); do_fpu_end(); mtrr_ap_init(); diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu_64.c index 66bdfb591fd8..e3b6cf70d62c 100644 --- a/arch/x86/power/cpu_64.c +++ b/arch/x86/power/cpu_64.c @@ -14,6 +14,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/mtrr.h> +#include <asm/xcr.h> static void fix_processor_context(void); @@ -122,6 +123,12 @@ static void __restore_processor_state(struct saved_context *ctxt) wrmsrl(MSR_GS_BASE, ctxt->gs_base); wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); + /* + * restore XCR0 for xsave capable cpu's. + */ + if (cpu_has_xsave) + xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); + fix_processor_context(); do_fpu_end(); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 7dcd321a0508..a27d562a9744 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -36,6 +36,7 @@ #include <xen/hvc-console.h> #include <asm/paravirt.h> +#include <asm/apic.h> #include <asm/page.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -580,16 +581,47 @@ static void xen_io_delay(void) } #ifdef CONFIG_X86_LOCAL_APIC -static u32 xen_apic_read(unsigned long reg) +static u32 xen_apic_read(u32 reg) { return 0; } -static void xen_apic_write(unsigned long reg, u32 val) +static void xen_apic_write(u32 reg, u32 val) { /* Warn to see if there's any stray references */ WARN_ON(1); } + +static u64 xen_apic_icr_read(void) +{ + return 0; +} + +static void xen_apic_icr_write(u32 low, u32 id) +{ + /* Warn to see if there's any stray references */ + WARN_ON(1); +} + +static void xen_apic_wait_icr_idle(void) +{ + return; +} + +static u32 xen_safe_apic_wait_icr_idle(void) +{ + return 0; +} + +static struct apic_ops xen_basic_apic_ops = { + .read = xen_apic_read, + .write = xen_apic_write, + .icr_read = xen_apic_icr_read, + .icr_write = xen_apic_icr_write, + .wait_icr_idle = xen_apic_wait_icr_idle, + .safe_wait_icr_idle = xen_safe_apic_wait_icr_idle, +}; + #endif static void xen_flush_tlb(void) @@ -1273,8 +1305,6 @@ static const struct pv_irq_ops xen_irq_ops __initdata = { static const struct pv_apic_ops xen_apic_ops __initdata = { #ifdef CONFIG_X86_LOCAL_APIC - .apic_write = xen_apic_write, - .apic_read = xen_apic_read, .setup_boot_clock = paravirt_nop, .setup_secondary_clock = paravirt_nop, .startup_ipi_hook = paravirt_nop, @@ -1677,6 +1707,13 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; +#ifdef CONFIG_X86_LOCAL_APIC + /* + * set up the basic apic ops. + */ + apic_ops = &xen_basic_apic_ops; +#endif + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; |