diff options
Diffstat (limited to 'arch')
56 files changed, 3189 insertions, 1958 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 682367bd0f65..296bc03d1cf1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -194,6 +194,13 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. +config ARCH_REALVIEW + bool "RealView" + select ARM_AMBA + select ICST307 + help + This enables support for ARM Ltd RealView boards. + config ARCH_IMX bool "IMX" @@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-aaec2000/Kconfig" +source "arch/arm/mach-realview/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -340,6 +349,13 @@ config NR_CPUS depends on SMP default "4" +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && HOTPLUG && EXPERIMENTAL + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -688,8 +704,7 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ - || MACH_MP1000 + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64cf480b0b02..114cda7f1b73 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -38,6 +38,7 @@ comma = , # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) +arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k) arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4) arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 @@ -99,6 +100,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 + machine-$(CONFIG_ARCH_REALVIEW) := realview ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -142,7 +144,7 @@ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/ -libs-y += arch/arm/lib/ +libs-y := arch/arm/lib/ $(libs-y) # Default target when executing plain make ifeq ($(CONFIG_XIP_KERNEL),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index a54d2eb64892..7c7f475e213e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,8 +39,7 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) || \ - defined(CONFIG_MACH_MP1000) + defined(CONFIG_ARCH_OMAP) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 38c9a721d5c9..32bd552e0986 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" # CONFIG_XIP_KERNEL is not set # @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 12ef23d1c016..66ac0885df3e 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index c279e41ed10e..f74c926beb42 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_ARCH_IXDP4XX=y CONFIG_CPU_IXP46X=y -CONFIG_MACH_GTWX5715=y +# CONFIG_MACH_GTWX5715 is not set # # IXP4xx Options diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/realview_defconfig index d2cbc6fada1d..0485b2f1cc20 100644 --- a/arch/arm/configs/mp1000_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Fri Sep 16 15:48:13 2005 +# Linux kernel version: 2.6.14-rc2 +# Thu Sep 29 14:50:10 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -12,11 +12,9 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options # -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # @@ -24,18 +22,16 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y +# CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y +# CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -58,17 +54,15 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_KMOD is not set # # System Type # # CONFIG_ARCH_CLPS7500 is not set -CONFIG_ARCH_CLPS711X=y +# CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_CAMELOT is not set @@ -86,43 +80,43 @@ CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_REALVIEW=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set # -# CLPS711X/EP721X Implementations +# RealView platform type # -# CONFIG_ARCH_AUTCPU12 is not set -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CEIVA is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_FORTUNET is not set -CONFIG_MACH_MP1000=y -CONFIG_MP1000_90MHZ=y +CONFIG_MACH_REALVIEW_EB=y # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_ARM720T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_LV4T=y -CONFIG_CPU_CACHE_V4=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_V6 is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WT=y -CONFIG_CPU_TLB_V4WT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y # # Processor Features # CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_GIC=y +CONFIG_ICST307=y # # Bus support # +CONFIG_ARM_AMBA=y CONFIG_ISA_DMA_API=y # @@ -133,14 +127,8 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set -CONFIG_PREEMPT=y # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set @@ -151,7 +139,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" # CONFIG_XIP_KERNEL is not set # @@ -163,14 +151,14 @@ CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_me # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y +# CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set # @@ -197,10 +185,9 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -210,36 +197,14 @@ CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -247,7 +212,6 @@ CONFIG_IPV6=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -269,14 +233,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Memory Technology Devices (MTD) # CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -292,45 +252,36 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=m +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=m -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x0000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_EDB7312=m +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_ARM_INTEGRATOR=y +# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PLATRAM is not set # @@ -340,7 +291,6 @@ CONFIG_MTD_EDB7312=m # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -352,12 +302,7 @@ CONFIG_MTD_EDB7312=m # # NAND Flash Device Drivers # -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_MP1000=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND is not set # # Parallel port support @@ -372,53 +317,22 @@ CONFIG_MTD_NAND_IDS=y # Block devices # # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=2 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_IDE_ARM=y -CONFIG_BLK_DEV_IDE_MP1000=y -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# # SCSI device support # # CONFIG_RAID_ATTRS is not set @@ -427,14 +341,7 @@ CONFIG_BLK_DEV_IDE_MP1000=y # # Multi-device support (RAID and LVM) # -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set +# CONFIG_MD is not set # # Fusion MPT device support @@ -444,7 +351,6 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -468,10 +374,9 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set +CONFIG_MII=y +CONFIG_SMC91X=y # CONFIG_DM9000 is not set -CONFIG_CS89x0=y # # Ethernet (1000 Mbit) @@ -496,8 +401,6 @@ CONFIG_CS89x0=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -514,17 +417,28 @@ CONFIG_INPUT=y # # Userland interfaces # -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set -CONFIG_INPUT_EVBUG=y +# CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -533,8 +447,9 @@ CONFIG_INPUT_EVBUG=y # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -549,21 +464,19 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTY_COUNT=16 # # IPMI @@ -574,8 +487,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_RTC=y +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -596,9 +509,8 @@ CONFIG_RTC=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -621,18 +533,72 @@ CONFIG_HWMON=y # # Graphics support # -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_ARMAACI is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -654,32 +620,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTACTL=y +# CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -694,8 +645,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -704,7 +658,6 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set @@ -712,22 +665,10 @@ CONFIG_RAMFS=y # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -740,32 +681,16 @@ CONFIG_CRAMFS=m CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -802,7 +727,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -818,34 +743,26 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_UTF8 is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_WAITQ=y +# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -856,31 +773,7 @@ CONFIG_DEBUG_LL=y # # Cryptographic options # -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -893,5 +786,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3284118f356b..9def4404e1f2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -1050,3 +1050,34 @@ static int __init noirqdebug_setup(char *str) } __setup("noirqdebug", noirqdebug_setup); + +#ifdef CONFIG_HOTPLUG_CPU +/* + * The CPU has been marked offline. Migrate IRQs off this CPU. If + * the affinity settings do not allow other CPUs, force them onto any + * available CPU. + */ +void migrate_irqs(void) +{ + unsigned int i, cpu = smp_processor_id(); + + for (i = 0; i < NR_IRQS; i++) { + struct irqdesc *desc = irq_desc + i; + + if (desc->cpu == cpu) { + unsigned int newcpu = any_online_cpu(desc->affinity); + + if (newcpu == NR_CPUS) { + if (printk_ratelimit()) + printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", + i, cpu); + + cpus_setall(desc->affinity); + newcpu = any_online_cpu(desc->affinity); + } + + route_irq(desc, i, newcpu); + } + } +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 409db6d5ec99..ba298277becd 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/kallsyms.h> #include <linux/init.h> +#include <linux/cpu.h> #include <asm/system.h> #include <asm/io.h> @@ -105,6 +106,14 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { void (*idle)(void) = pm_idle; + +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_is_offline(smp_processor_id())) { + leds_event(led_idle_start); + cpu_die(); + } +#endif + if (!idle) idle = default_idle; preempt_disable(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 826164945747..edb5a406922f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -80,19 +80,23 @@ static DEFINE_SPINLOCK(smp_call_function_lock); int __cpuinit __cpu_up(unsigned int cpu) { - struct task_struct *idle; + struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); + struct task_struct *idle = ci->idle; pgd_t *pgd; pmd_t *pmd; int ret; /* - * Spawn a new process manually. Grab a pointer to - * its task struct so we can mess with it + * Spawn a new process manually, if not already done. + * Grab a pointer to its task struct so we can mess with it */ - idle = fork_idle(cpu); - if (IS_ERR(idle)) { - printk(KERN_ERR "CPU%u: fork() failed\n", cpu); - return PTR_ERR(idle); + if (!idle) { + idle = fork_idle(cpu); + if (IS_ERR(idle)) { + printk(KERN_ERR "CPU%u: fork() failed\n", cpu); + return PTR_ERR(idle); + } + ci->idle = idle; } /* @@ -155,6 +159,91 @@ int __cpuinit __cpu_up(unsigned int cpu) return ret; } +#ifdef CONFIG_HOTPLUG_CPU +/* + * __cpu_disable runs on the processor to be shutdown. + */ +int __cpuexit __cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + struct task_struct *p; + int ret; + + ret = mach_cpu_disable(cpu); + if (ret) + return ret; + + /* + * Take this CPU offline. Once we clear this, we can't return, + * and we must not schedule until we're ready to give up the cpu. + */ + cpu_clear(cpu, cpu_online_map); + + /* + * OK - migrate IRQs away from this CPU + */ + migrate_irqs(); + + /* + * Flush user cache and TLB mappings, and then remove this CPU + * from the vm mask set of all processes. + */ + flush_cache_all(); + local_flush_tlb_all(); + + read_lock(&tasklist_lock); + for_each_process(p) { + if (p->mm) + cpu_clear(cpu, p->mm->cpu_vm_mask); + } + read_unlock(&tasklist_lock); + + return 0; +} + +/* + * called on the thread which is asking for a CPU to be shutdown - + * waits until shutdown has completed, or it is timed out. + */ +void __cpuexit __cpu_die(unsigned int cpu) +{ + if (!platform_cpu_kill(cpu)) + printk("CPU%u: unable to kill\n", cpu); +} + +/* + * Called from the idle thread for the CPU which has been shutdown. + * + * Note that we disable IRQs here, but do not re-enable them + * before returning to the caller. This is also the behaviour + * of the other hotplug-cpu capable cores, so presumably coming + * out of idle fixes this. + */ +void __cpuexit cpu_die(void) +{ + unsigned int cpu = smp_processor_id(); + + local_irq_disable(); + idle_task_exit(); + + /* + * actual CPU shutdown procedure is at least platform (if not + * CPU) specific + */ + platform_cpu_die(cpu); + + /* + * Do not return to the idle loop - jump back to the secondary + * cpu initialisation. There's some initialisation which needs + * to be repeated to undo the effects of taking the CPU offline. + */ + __asm__("mov sp, %0\n" + " b secondary_start_kernel" + : + : "r" ((void *)current->thread_info + THREAD_SIZE - 8)); +} +#endif /* CONFIG_HOTPLUG_CPU */ + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -236,6 +325,8 @@ void __init smp_prepare_boot_cpu(void) { unsigned int cpu = smp_processor_id(); + per_cpu(cpu_data, cpu).idle = current; + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); cpu_set(cpu, cpu_online_map); @@ -309,8 +400,8 @@ int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, printk(KERN_CRIT "CPU%u: smp_call_function timeout for %p(%p)\n" " callmap %lx pending %lx, %swait\n", - smp_processor_id(), func, info, callmap, data.pending, - wait ? "" : "no "); + smp_processor_id(), func, info, *cpus_addr(callmap), + *cpus_addr(data.pending), wait ? "" : "no "); /* * TRACE diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 71e5b99e519e..391f3ab3ff32 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -7,13 +7,27 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ copy_page.o delay.o findbit.o memchr.o memcpy.o \ - memset.o memzero.o setbit.o strncpy_from_user.o \ - strnlen_user.o strchr.o strrchr.o testchangebit.o \ - testclearbit.o testsetbit.o uaccess.o getuser.o \ - putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + memmove.o memset.o memzero.o setbit.o \ + strncpy_from_user.o strnlen_user.o \ + strchr.o strrchr.o \ + testchangebit.o testclearbit.o testsetbit.o \ + getuser.o putuser.o clear_user.o \ + ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($CONFIG_PREEMPT,y) + lib-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + lib-y += copy_from_user.o copy_to_user.o +else + lib-y += uaccess.o +endif +endif + ifeq ($(CONFIG_CPU_32v3),y) lib-y += io-readsw-armv3.o io-writesw-armv3.o else diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 64a988c1ad44..f35d91fbe117 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,6 +1,6 @@ #include <linux/config.h> -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE) +#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K) .macro bitop, instr mov r2, #1 and r3, r0, #7 @ Get bit offset diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S new file mode 100644 index 000000000000..7ff9f831b3f9 --- /dev/null +++ b/arch/arm/lib/clear_user.S @@ -0,0 +1,52 @@ +/* + * linux/arch/arm/lib/clear_user.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + +/* Prototype: int __arch_clear_user(void *addr, size_t sz) + * Purpose : clear some user memory + * Params : addr - user memory address to clear + * : sz - number of bytes to clear + * Returns : number of bytes NOT cleared + */ +ENTRY(__arch_clear_user) + stmfd sp!, {r1, lr} + mov r2, #0 + cmp r1, #4 + blt 2f + ands ip, r0, #3 + beq 1f + cmp ip, #2 +USER( strbt r2, [r0], #1) +USER( strlebt r2, [r0], #1) +USER( strltbt r2, [r0], #1) + rsb ip, ip, #4 + sub r1, r1, ip @ 7 6 5 4 3 2 1 +1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 +USER( strplt r2, [r0], #4) +USER( strplt r2, [r0], #4) + bpl 1b + adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 +USER( strplt r2, [r0], #4) +2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x +USER( strnebt r2, [r0], #1) +USER( strnebt r2, [r0], #1) + tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 +USER( strnebt r2, [r0], #1) + mov r0, #0 + LOADREGS(fd,sp!, {r1, pc}) + + .section .fixup,"ax" + .align 0 +9001: LOADREGS(fd,sp!, {r0, pc}) + .previous + diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S new file mode 100644 index 000000000000..7497393a0e81 --- /dev/null +++ b/arch/arm/lib/copy_from_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_from_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Prototype: + * + * size_t __arch_copy_from_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to kernel memory from user memory + * + * Params: + * + * to = kernel memory + * from = user memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort +100: ldrt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldr1w \ptr, \reg1, \abort + ldr1w \ptr, \reg2, \abort + ldr1w \ptr, \reg3, \abort + ldr1w \ptr, \reg4, \abort + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort + ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort + .endm + + .macro ldr1b ptr reg cond=al abort +100: ldr\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_from_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2} + sub r3, r0, r1 + rsb r1, r3, r2 + str r1, [sp] + bl __memzero + ldr r0, [sp], #4 + copy_abort_end + .previous + diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S new file mode 100644 index 000000000000..838e435e4922 --- /dev/null +++ b/arch/arm/lib/copy_template.S @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/lib/copy_template.s + * + * Code template for optimized memory copy functions + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + +/* + * Theory of operation + * ------------------- + * + * This file provides the core code for a forward memory copy used in + * the implementation of memcopy(), copy_to_user() and copy_from_user(). + * + * The including file must define the following accessor macros + * according to the need of the given function: + * + * ldr1w ptr reg abort + * + * This loads one word from 'ptr', stores it in 'reg' and increments + * 'ptr' to the next word. The 'abort' argument is used for fixup tables. + * + * ldr4w ptr reg1 reg2 reg3 reg4 abort + * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * + * This loads four or eight words starting from 'ptr', stores them + * in provided registers and increments 'ptr' past those words. + * The'abort' argument is used for fixup tables. + * + * ldr1b ptr reg cond abort + * + * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte. + * It also must apply the condition code if provided, otherwise the + * "al" condition is assumed by default. + * + * str1w ptr reg abort + * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * str1b ptr reg cond abort + * + * Same as their ldr* counterparts, but data is stored to 'ptr' location + * rather than being loaded. + * + * enter reg1 reg2 + * + * Preserve the provided registers on the stack plus any additional + * data as needed by the implementation including this code. Called + * upon code entry. + * + * exit reg1 reg2 + * + * Restore registers with the values previously saved with the + * 'preserv' macro. Called upon code termination. + */ + + + enter r4, lr + + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #0] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb r3, ip, #32 ) + CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, r3 ) @ C gets set + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #0] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 4f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +3: PLD( pld [r1, #124] ) +4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + subs r2, r2, #32 + str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr1w r1, r3, abort=20f + ldr1w r1, r4, abort=20f + ldr1w r1, r5, abort=20f + ldr1w r1, r6, abort=20f + ldr1w r1, r7, abort=20f + ldr1w r1, r8, abort=20f + ldr1w r1, lr, abort=20f + + add pc, pc, ip + nop + nop + str1w r0, r3, abort=20f + str1w r0, r4, abort=20f + str1w r0, r5, abort=20f + str1w r0, r6, abort=20f + str1w r0, r7, abort=20f + str1w r0, r8, abort=20f + str1w r0, lr, abort=20f + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldr1b r1, r3, ne, abort=21f + ldr1b r1, r4, cs, abort=21f + ldr1b r1, ip, cs, abort=21f + str1b r0, r3, ne, abort=21f + str1b r0, r4, cs, abort=21f + str1b r0, ip, cs, abort=21f + + exit r4, pc + +9: rsb ip, ip, #4 + cmp ip, #2 + ldr1b r1, r3, gt, abort=21f + ldr1b r1, r4, ge, abort=21f + ldr1b r1, lr, abort=21f + str1b r0, r3, gt, abort=21f + str1b r0, r4, ge, abort=21f + subs r2, r2, ip + str1b r0, lr, abort=21f + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr1w r1, lr, abort=21f + beq 17f + bgt 18f + + + .macro forward_copy_shift pull push + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #0] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 13f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +12: PLD( pld [r1, #124] ) +13: ldr4w r1, r4, r5, r6, r7, abort=19f + mov r3, lr, pull #\pull + subs r2, r2, #32 + ldr4w r1, r8, r9, ip, lr, abort=19f + orr r3, r3, r4, push #\push + mov r4, r4, pull #\pull + orr r4, r4, r5, push #\push + mov r5, r5, pull #\pull + orr r5, r5, r6, push #\push + mov r6, r6, pull #\pull + orr r6, r6, r7, push #\push + mov r7, r7, pull #\pull + orr r7, r7, r8, push #\push + mov r8, r8, pull #\pull + orr r8, r8, r9, push #\push + mov r9, r9, pull #\pull + orr r9, r9, ip, push #\push + mov ip, ip, pull #\pull + orr ip, ip, lr, push #\push + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov r3, lr, pull #\pull + ldr1w r1, lr, abort=21f + subs ip, ip, #4 + orr r3, r3, lr, push #\push + str1w r0, r3, abort=21f + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: sub r1, r1, #(\push / 8) + b 8b + + .endm + + + forward_copy_shift pull=8 push=24 + +17: forward_copy_shift pull=16 push=16 + +18: forward_copy_shift pull=24 push=8 + + +/* + * Abort preanble and completion macros. + * If a fixup handler is required then those macros must surround it. + * It is assumed that the fixup code will handle the private part of + * the exit macro. + */ + + .macro copy_abort_preamble +19: ldmfd sp!, {r5 - r9} + b 21f +20: ldmfd sp!, {r5 - r8} +21: + .endm + + .macro copy_abort_end + ldmfd sp!, {r4, pc} + .endm + diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S new file mode 100644 index 000000000000..4a6d8ea14022 --- /dev/null +++ b/arch/arm/lib/copy_to_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_to_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Prototype: + * + * size_t __arch_copy_to_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to user memory from kernel memory + * + * Params: + * + * to = user memory + * from = kernel memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm + + .macro str1w ptr reg abort +100: strt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + str1w \ptr, \reg1, \abort + str1w \ptr, \reg2, \abort + str1w \ptr, \reg3, \abort + str1w \ptr, \reg4, \abort + str1w \ptr, \reg5, \abort + str1w \ptr, \reg6, \abort + str1w \ptr, \reg7, \abort + str1w \ptr, \reg8, \abort + .endm + + .macro str1b ptr reg cond=al abort +100: str\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_to_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2, r3} + sub r0, r0, r1 + rsb r0, r0, r2 + copy_abort_end + .previous + diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index f5a593ceb8cc..7e71d6708a8d 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -1,393 +1,59 @@ /* * linux/arch/arm/lib/memcpy.S * - * Copyright (C) 1995-1999 Russell King + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. */ + #include <linux/linkage.h> #include <asm/assembler.h> - .text - -#define ENTER \ - mov ip,sp ;\ - stmfd sp!,{r0,r4-r9,fp,ip,lr,pc} ;\ - sub fp,ip,#4 - -#define EXIT \ - LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc}) - -#define EXITEQ \ - LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc}) - -/* - * Prototype: void memcpy(void *to,const void *from,unsigned long n); - */ -ENTRY(memcpy) -ENTRY(memmove) - ENTER - cmp r1, r0 - bcc 23f - subs r2, r2, #4 - blt 6f - PLD( pld [r1, #0] ) - ands ip, r0, #3 - bne 7f - ands ip, r1, #3 - bne 8f + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm -1: subs r2, r2, #8 - blt 5f - subs r2, r2, #20 - blt 4f - PLD( pld [r1, #28] ) - PLD( subs r2, r2, #64 ) - PLD( blt 3f ) -2: PLD( pld [r1, #60] ) - PLD( pld [r1, #92] ) - ldmia r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgeia r0!, {r3 - r9, ip} - ldmgeia r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmia r0!, {r3 - r9, ip} - bge 2b -3: PLD( ldmia r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgeia r0!, {r3 - r9, ip} ) - PLD( ldmgeia r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmia r0!, {r3 - r9, ip} ) -4: cmn r2, #16 - ldmgeia r1!, {r3 - r6} - subge r2, r2, #16 - stmgeia r0!, {r3 - r6} - adds r2, r2, #20 - ldmgeia r1!, {r3 - r5} - subge r2, r2, #12 - stmgeia r0!, {r3 - r5} -5: adds r2, r2, #8 - blt 6f - subs r2, r2, #4 - ldrlt r3, [r1], #4 - ldmgeia r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0], #4 - stmgeia r0!, {r4, r5} + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm -6: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - EXIT + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -7: rsb ip, ip, #4 - cmp ip, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - subs r2, r2, ip - blt 6b - ands ip, r1, #3 - beq 1b + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm -8: bic r1, r1, #3 - ldr r7, [r1], #4 - cmp ip, #2 - bgt 18f - beq 13f - cmp r2, #12 - blt 11f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 10f ) - PLD( pld [r1, #28] ) -9: PLD( pld [r1, #44] ) -10: mov r3, r7, pull #8 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #24 - mov r4, r4, pull #8 - orr r4, r4, r5, push #24 - mov r5, r5, pull #8 - orr r5, r5, r6, push #24 - mov r6, r6, pull #8 - orr r6, r6, r7, push #24 - stmia r0!, {r3 - r6} - bge 9b - PLD( cmn r2, #32 ) - PLD( bge 10b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 12f -11: mov r3, r7, pull #8 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #24 - str r3, [r0], #4 - bge 11b -12: sub r1, r1, #3 - b 6b + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm -13: cmp r2, #12 - blt 16f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 15f ) - PLD( pld [r1, #28] ) -14: PLD( pld [r1, #44] ) -15: mov r3, r7, pull #16 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #16 - mov r4, r4, pull #16 - orr r4, r4, r5, push #16 - mov r5, r5, pull #16 - orr r5, r5, r6, push #16 - mov r6, r6, pull #16 - orr r6, r6, r7, push #16 - stmia r0!, {r3 - r6} - bge 14b - PLD( cmn r2, #32 ) - PLD( bge 15b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 17f -16: mov r3, r7, pull #16 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #16 - str r3, [r0], #4 - bge 16b -17: sub r1, r1, #2 - b 6b + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -18: cmp r2, #12 - blt 21f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 20f ) - PLD( pld [r1, #28] ) -19: PLD( pld [r1, #44] ) -20: mov r3, r7, pull #24 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #8 - mov r4, r4, pull #24 - orr r4, r4, r5, push #8 - mov r5, r5, pull #24 - orr r5, r5, r6, push #8 - mov r6, r6, pull #24 - orr r6, r6, r7, push #8 - stmia r0!, {r3 - r6} - bge 19b - PLD( cmn r2, #32 ) - PLD( bge 20b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 22f -21: mov r3, r7, pull #24 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #8 - str r3, [r0], #4 - bge 21b -22: sub r1, r1, #1 - b 6b + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + .macro enter reg1 reg2 + stmdb sp!, {r0, \reg1, \reg2} + .endm -23: add r1, r1, r2 - add r0, r0, r2 - subs r2, r2, #4 - blt 29f - PLD( pld [r1, #-4] ) - ands ip, r0, #3 - bne 30f - ands ip, r1, #3 - bne 31f + .macro exit reg1 reg2 + ldmfd sp!, {r0, \reg1, \reg2} + .endm -24: subs r2, r2, #8 - blt 28f - subs r2, r2, #20 - blt 27f - PLD( pld [r1, #-32] ) - PLD( subs r2, r2, #64 ) - PLD( blt 26f ) -25: PLD( pld [r1, #-64] ) - PLD( pld [r1, #-96] ) - ldmdb r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgedb r0!, {r3 - r9, ip} - ldmgedb r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmdb r0!, {r3 - r9, ip} - bge 25b -26: PLD( ldmdb r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgedb r0!, {r3 - r9, ip} ) - PLD( ldmgedb r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmdb r0!, {r3 - r9, ip} ) -27: cmn r2, #16 - ldmgedb r1!, {r3 - r6} - subge r2, r2, #16 - stmgedb r0!, {r3 - r6} - adds r2, r2, #20 - ldmgedb r1!, {r3 - r5} - subge r2, r2, #12 - stmgedb r0!, {r3 - r5} -28: adds r2, r2, #8 - blt 29f - subs r2, r2, #4 - ldrlt r3, [r1, #-4]! - ldmgedb r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0, #-4]! - stmgedb r0!, {r4, r5} + .text -29: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - EXIT +/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ -30: cmp ip, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - subs r2, r2, ip - blt 29b - ands ip, r1, #3 - beq 24b - -31: bic r1, r1, #3 - ldr r3, [r1], #0 - cmp ip, #2 - blt 41f - beq 36f - cmp r2, #12 - blt 34f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 33f ) - PLD( pld [r1, #-32] ) -32: PLD( pld [r1, #-48] ) -33: mov r7, r3, push #8 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #24 - mov r6, r6, push #8 - orr r6, r6, r5, pull #24 - mov r5, r5, push #8 - orr r5, r5, r4, pull #24 - mov r4, r4, push #8 - orr r4, r4, r3, pull #24 - stmdb r0!, {r4, r5, r6, r7} - bge 32b - PLD( cmn r2, #32 ) - PLD( bge 33b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 35f -34: mov ip, r3, push #8 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #24 - str ip, [r0, #-4]! - bge 34b -35: add r1, r1, #3 - b 29b - -36: cmp r2, #12 - blt 39f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 38f ) - PLD( pld [r1, #-32] ) -37: PLD( pld [r1, #-48] ) -38: mov r7, r3, push #16 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #16 - mov r6, r6, push #16 - orr r6, r6, r5, pull #16 - mov r5, r5, push #16 - orr r5, r5, r4, pull #16 - mov r4, r4, push #16 - orr r4, r4, r3, pull #16 - stmdb r0!, {r4, r5, r6, r7} - bge 37b - PLD( cmn r2, #32 ) - PLD( bge 38b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 40f -39: mov ip, r3, push #16 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #16 - str ip, [r0, #-4]! - bge 39b -40: add r1, r1, #2 - b 29b +ENTRY(memcpy) -41: cmp r2, #12 - blt 44f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 43f ) - PLD( pld [r1, #-32] ) -42: PLD( pld [r1, #-48] ) -43: mov r7, r3, push #24 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #8 - mov r6, r6, push #24 - orr r6, r6, r5, pull #8 - mov r5, r5, push #24 - orr r5, r5, r4, pull #8 - mov r4, r4, push #24 - orr r4, r4, r3, pull #8 - stmdb r0!, {r4, r5, r6, r7} - bge 42b - PLD( cmn r2, #32 ) - PLD( bge 43b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 45f -44: mov ip, r3, push #24 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #8 - str ip, [r0, #-4]! - bge 44b -45: add r1, r1, #1 - b 29b +#include "copy_template.S" diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S new file mode 100644 index 000000000000..ef7fddc14ac9 --- /dev/null +++ b/arch/arm/lib/memmove.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/memmove.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + + .text + +/* + * Prototype: void *memmove(void *dest, const void *src, size_t n); + * + * Note: + * + * If the memory regions don't overlap, we simply branch to memcpy which is + * normally a bit faster. Otherwise the copy is done going downwards. This + * is a transposition of the code from copy_template.S but with the copy + * occurring in the opposite direction. + */ + +ENTRY(memmove) + + subs ip, r0, r1 + cmphi r2, ip + bls memcpy + + stmfd sp!, {r0, r4, lr} + add r1, r1, r2 + add r0, r0, r2 + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #-4] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, ip ) @ C is set here + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #-4] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 4f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +3: PLD( pld [r1, #-128] ) +4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr} + subs r2, r2, #32 + stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr} + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr r3, [r1, #-4]! + ldr r4, [r1, #-4]! + ldr r5, [r1, #-4]! + ldr r6, [r1, #-4]! + ldr r7, [r1, #-4]! + ldr r8, [r1, #-4]! + ldr lr, [r1, #-4]! + + add pc, pc, ip + nop + nop + str r3, [r0, #-4]! + str r4, [r0, #-4]! + str r5, [r0, #-4]! + str r6, [r0, #-4]! + str r7, [r0, #-4]! + str r8, [r0, #-4]! + str lr, [r0, #-4]! + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldrneb r3, [r1, #-1]! + ldrcsb r4, [r1, #-1]! + ldrcsb ip, [r1, #-1] + strneb r3, [r0, #-1]! + strcsb r4, [r0, #-1]! + strcsb ip, [r0, #-1] + ldmfd sp!, {r0, r4, pc} + +9: cmp ip, #2 + ldrgtb r3, [r1, #-1]! + ldrgeb r4, [r1, #-1]! + ldrb lr, [r1, #-1]! + strgtb r3, [r0, #-1]! + strgeb r4, [r0, #-1]! + subs r2, r2, ip + strb lr, [r0, #-1]! + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr r3, [r1, #0] + beq 17f + blt 18f + + + .macro backward_copy_shift push pull + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #-4] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 13f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +12: PLD( pld [r1, #-128] ) +13: ldmdb r1!, {r7, r8, r9, ip} + mov lr, r3, push #\push + subs r2, r2, #32 + ldmdb r1!, {r3, r4, r5, r6} + orr lr, lr, ip, pull #\pull + mov ip, ip, push #\push + orr ip, ip, r9, pull #\pull + mov r9, r9, push #\push + orr r9, r9, r8, pull #\pull + mov r8, r8, push #\push + orr r8, r8, r7, pull #\pull + mov r7, r7, push #\push + orr r7, r7, r6, pull #\pull + mov r6, r6, push #\push + orr r6, r6, r5, pull #\pull + mov r5, r5, push #\push + orr r5, r5, r4, pull #\pull + mov r4, r4, push #\push + orr r4, r4, r3, pull #\pull + stmdb r0!, {r4 - r9, ip, lr} + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov lr, r3, push #\push + ldr r3, [r1, #-4]! + subs ip, ip, #4 + orr lr, lr, r3, pull #\pull + str lr, [r0, #-4]! + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: add r1, r1, #(\pull / 8) + b 8b + + .endm + + + backward_copy_shift push=8 pull=24 + +17: backward_copy_shift push=16 pull=16 + +18: backward_copy_shift push=24 pull=8 + diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d3ed0636c008..6f1b5b49fe4c 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user) stmfd sp!, {r2, r4 - r7, lr} cmp r2, #4 blt .c2u_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .c2u_dest_not_aligned .c2u_dest_aligned: @@ -73,25 +71,13 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #32 blt .c2u_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .c2u_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.c2u_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.c2u_0cpynopld: ldmia r1!, {r3 - r6} + +.c2u_0cpy8lp: ldmia r1!, {r3 - r6} stmia r0!, {r3 - r6} @ Shouldnt fault ldmia r1!, {r3 - r6} subs ip, ip, #32 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .c2u_0cpynopld ) - PLD( add ip, ip, #64 ) .c2u_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @@ -143,17 +129,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_1cpynopld: mov r3, r7, pull #8 + +.c2u_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -165,9 +142,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_1cpynopld ) - PLD( add ip, ip, #32 ) .c2u_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -210,17 +184,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_2cpynopld: mov r3, r7, pull #16 + +.c2u_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -232,9 +197,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_2cpynopld ) - PLD( add ip, ip, #32 ) .c2u_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -277,17 +239,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_3cpynopld: mov r3, r7, pull #24 + +.c2u_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #8 @@ -299,9 +252,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_3cpynopld ) - PLD( add ip, ip, #32 ) .c2u_3rem8lp: tst ip, #8 movne r3, r7, pull #24 @@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user) stmfd sp!, {r0, r2, r4 - r7, lr} cmp r2, #4 blt .cfu_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .cfu_dest_not_aligned .cfu_dest_aligned: @@ -385,25 +333,13 @@ USER( ldrt r3, [r1], #4) sub r2, r2, ip subs ip, ip, #32 blt .cfu_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .cfu_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.cfu_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault + +.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault stmia r0!, {r3 - r6} ldmia r1!, {r3 - r6} @ Shouldnt fault subs ip, ip, #32 stmia r0!, {r3 - r6} bpl .cfu_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .cfu_0cpynopld ) - PLD( add ip, ip, #64 ) .cfu_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @ Shouldnt fault @@ -456,17 +392,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_1cpynopld: mov r3, r7, pull #8 + +.cfu_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -478,9 +405,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} bpl .cfu_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_1cpynopld ) - PLD( add ip, ip, #32 ) .cfu_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -523,17 +447,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_2cpynopld: mov r3, r7, pull #16 + +.cfu_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -545,9 +460,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} bpl .cfu_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_2cpynopld ) - PLD( add ip, ip, #32 ) .cfu_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -590,17 +502,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_3cpynopld: mov r3, r7, pull #24 + +.cfu_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} @ Shouldnt fault orr r3, r3, r4, push #8 mov r4, r4, pull #24 @@ -612,9 +515,6 @@ USER( ldrt r7, [r1], #4) @ May fault stmia r0!, {r3 - r6} subs ip, ip, #16 bpl .cfu_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_3cpynopld ) - PLD( add ip, ip, #32 ) .cfu_3rem8lp: tst ip, #8 movne r3, r7, pull #24 @@ -657,41 +557,3 @@ USER( ldrgtbt r3, [r1], #1) @ May fault LOADREGS(fd,sp!, {r4 - r7, pc}) .previous -/* Prototype: int __arch_clear_user(void *addr, size_t sz) - * Purpose : clear some user memory - * Params : addr - user memory address to clear - * : sz - number of bytes to clear - * Returns : number of bytes NOT cleared - */ -ENTRY(__arch_clear_user) - stmfd sp!, {r1, lr} - mov r2, #0 - cmp r1, #4 - blt 2f - ands ip, r0, #3 - beq 1f - cmp ip, #2 -USER( strbt r2, [r0], #1) -USER( strlebt r2, [r0], #1) -USER( strltbt r2, [r0], #1) - rsb ip, ip, #4 - sub r1, r1, ip @ 7 6 5 4 3 2 1 -1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 -USER( strplt r2, [r0], #4) -USER( strplt r2, [r0], #4) - bpl 1b - adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 -USER( strplt r2, [r0], #4) -2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x -USER( strnebt r2, [r0], #1) -USER( strnebt r2, [r0], #1) - tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 -USER( strnebt r2, [r0], #1) - mov r0, #0 - LOADREGS(fd,sp!, {r1, pc}) - - .section .fixup,"ax" - .align 0 -9001: LOADREGS(fd,sp!, {r0, pc}) - .previous - diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index d5c155045762..0793dcf54f2e 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. -config MACH_MP1000 - bool "MACH_MP1000" - help - Say Y if you intend to run the kernel on the Comdial MP1000 platform. - -config MP1000_90MHZ - bool "MP1000_90MHZ" - depends on MACH_MP1000 - help - Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ - endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 8a6dc1ccf8fe..4a197315f0cf 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 72f8bb05d55e..0d52e0851251 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -55,22 +55,22 @@ static struct map_desc edb7211_io_desc[] __initdata = { .virtual = EP7211_VIRT_EXTKBD, .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, - .type - MT_DEVICE + .type = MT_DEVICE, }, { /* and CS8900A Ethernet chip */ .virtual = EP7211_VIRT_CS8900A, .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), .length = SZ_1M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { /* flash banks */ .virtual = EP7211_VIRT_FLASH1, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = EP7211_VIRT_FLASH2, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c deleted file mode 100644 index c2816bcde5e7..000000000000 --- a/arch/arm/mach-clps711x/mp1000-mach.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mp1000.c - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/arch/mp1000-seprom.h> - -#include "common.h" - -extern void mp1000_map_io(void); - -static void __init mp1000_init(void) -{ - seprom_init(); -} - -MACHINE_START(MP1000, "Comdial MP1000") - /* Maintainer: Jon Ringle */ - .phys_ram = 0xc0000000, - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0015100, - .map_io = mp1000_map_io, - .init_irq = clps711x_init_irq, - .init_machine = mp1000_init, - .timer = &clps711x_timer, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c deleted file mode 100644 index 20e810b0ec0c..000000000000 --- a/arch/arm/mach-clps711x/mp1000-mm.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mm.c - * - * Extra MM routines for the MP1000 - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/hardware.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -extern void clps711x_map_io(void); - -static struct map_desc mp1000_io_desc[] __initdata = { - { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, - { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, - { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, - { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, - { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, - { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } -}; - -void __init mp1000_map_io(void) -{ - clps711x_map_io(); - iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); -} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c deleted file mode 100644 index b22d0bebb851..000000000000 --- a/arch/arm/mach-clps711x/mp1000-seprom.c +++ /dev/null @@ -1,195 +0,0 @@ -/*` - * mp1000-seprom.c - * - * This file contains the Serial EEPROM code for the MP1000 board - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/hardware.h> -#include <asm/hardware/clps7111.h> -#include <asm/arch/mp1000-seprom.h> - -/* If SepromInit() can initialize and checksum the seprom successfully, */ -/* then it will point seprom_data_ptr at the shadow copy. */ - -static eeprom_struct seprom_data; /* shadow copy of seprom content */ - -eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ - -/* - * Port D Bit 5 is Chip Select for EEPROM - * Port E Bit 0 is Input, Data out from EEPROM - * Port E Bit 1 is Output, Data in to EEPROM - * Port E Bit 2 is Output, CLK to EEPROM - */ - -static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); -static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); - -#define NO_OF_SHORTS 64 // Device is 64 x 16 bits -#define ENABLE_RW 0 -#define DISABLE_RW 1 - -static inline void toggle_seprom_clock(void) -{ - *port_e_ptr |= HwPortESepromCLK; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void select_eeprom(void) -{ - *port_d_ptr |= HwPortDEECS; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void deselect_eeprom(void) -{ - *port_d_ptr &= ~(HwPortDEECS); - *port_e_ptr &= ~(HwPortESepromDIn); -} - -/* - * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom - * and returns 0 if seprom is not initialized or - * has a checksum error. - */ - -eeprom_struct* get_seprom_ptr(void) -{ - return seprom_data_ptr; -} - -unsigned char* get_eeprom_mac_address(void) -{ - return seprom_data_ptr->variant.eprom_struct.mac_Address; -} - -/* - * ReadSProm, Physically reads data from the Serial PROM - */ -static void read_sprom(short address, int length, eeprom_struct *buffer) -{ - short data = COMMAND_READ | (address & 0x3F); - short bit; - int i; - - select_eeprom(); - - // Clock in 9 bits of the command - for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { - if (data & bit) - *port_e_ptr |= HwPortESepromDIn; - else - *port_e_ptr &= ~(HwPortESepromDIn); - - toggle_seprom_clock(); - } - - // - // Now read one or more shorts of data from the Seprom - // - while (length-- > 0) { - data = 0; - - // Read 16 bits at a time - for (i = 0; i < 16; i++) { - data <<= 1; - toggle_seprom_clock(); - data |= *port_e_ptr & HwPortESepromDOut; - - } - - buffer->variant.eprom_short_data[address++] = data; - } - - deselect_eeprom(); - - return; -} - - - -/* - * ReadSerialPROM - * - * Input: Pointer to array of 64 x 16 Bits - * - * Output: if no problem reading data is filled in - */ -static void read_serial_prom(eeprom_struct *data) -{ - read_sprom(0, 64, data); -} - - -// -// Compute Serial EEPROM checksum -// -// Input: Pointer to struct with Eprom data -// -// Output: The computed Eprom checksum -// -static short compute_seprom_checksum(eeprom_struct *data) -{ - short checksum = 0; - int i; - - for (i = 0; i < 126; i++) { - checksum += (short)data->variant.eprom_byte_data[i]; - } - - return((short)(0x5555 - (checksum & 0xFFFF))); -} - -// -// Make sure the data port bits for the SEPROM are correctly initialised -// - -void __init seprom_init(void) -{ - short checksum; - - // Init Port D - *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; - *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; - - // Init Port E - *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; - *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; - - // - // Make sure that EEPROM struct size never exceeds 128 bytes - // - if (sizeof(eeprom_struct) > 128) { - panic("Serial PROM struct size > 128, aborting read\n"); - } - - read_serial_prom(&seprom_data); - - checksum = compute_seprom_checksum(&seprom_data); - - if (checksum != seprom_data.variant.eprom_short_data[63]) { - panic("Serial EEPROM checksum failed\n"); - } - - seprom_data_ptr = &seprom_data; -} - diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 15261646dcdd..ed4614983adb 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -251,9 +251,33 @@ static struct platform_device serial_device = { }, }; +static struct resource am79c961_resources[] = { + { + .start = 0x220, + .end = 0x238, + .flags = IORESOURCE_IO, + }, { + .start = IRQ_EBSA110_ETHERNET, + .end = IRQ_EBSA110_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am79c961_device = { + .name = "am79c961", + .id = -1, + .num_resources = ARRAY_SIZE(am79c961_resources), + .resource = am79c961_resources, +}; + +static struct platform_device *ebsa110_devices[] = { + &serial_device, + &am79c961_device, +}; + static int __init ebsa110_init(void) { - return platform_device_register(&serial_device); + return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } arch_initcall(ebsa110_init); diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile index 1e6139d42a92..9621aeb61f46 100644 --- a/arch/arm/mach-ixp2000/Makefile +++ b/arch/arm/mach-ixp2000/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o +obj-y := core.o pci.o uengine.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 01c393c504d0..df140962bb0f 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp2000/common.c + * arch/arm/mach-ixp2000/core.c * * Common routines used by all IXP2400/2800 based platforms. * @@ -49,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags; *************************************************************************/ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) { - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); old_cfg->CCR = *IXP2000_SLOWPORT_CCR; @@ -62,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); } void ixp2000_release_slowport(struct slowport_cfg *old_cfg) @@ -71,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg) ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); spin_unlock_irqrestore(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); @@ -145,7 +144,7 @@ void __init ixp2000_map_io(void) iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); /* Set slowport to 8-bit mode. */ - ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); + ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); } @@ -209,7 +208,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); /* clear timer 1 */ - ixp2000_reg_write(IXP2000_T1_CLR, 1); + ixp2000_reg_wrb(IXP2000_T1_CLR, 1); while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); @@ -252,12 +251,12 @@ void __init ixp2000_init_time(unsigned long tick_rate) ixp2000_reg_write(IXP2000_T4_CLR, 0); ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T4_CSR; } else { ixp2000_reg_write(IXP2000_T2_CLR, 0); ixp2000_reg_write(IXP2000_T2_CLD, -1); - ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T2_CSR; } next_jiffy_time = 0xffffffff; @@ -279,7 +278,7 @@ static void update_gpio_int_csrs(void) ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); + ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); } void gpio_line_config(int line, int direction) @@ -297,9 +296,9 @@ void gpio_line_config(int line, int direction) GPIO_IRQ_level_high &= ~(1 << line); update_gpio_int_csrs(); - ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); } else if (direction == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); } local_irq_restore(flags); } @@ -365,12 +364,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_unmask(unsigned int irq) @@ -389,9 +388,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq) { unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; if (irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); else if (irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); } static void ixp2000_pci_irq_unmask(unsigned int irq) @@ -403,6 +402,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq) ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); } +/* + * Error interrupts. These are used extensively by the microengine drivers + */ +static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + int i; + unsigned long status = *IXP2000_IRQ_ERR_STATUS; + + for(i = 31; i >= 0; i--) { + if(status & (1 << i)) { + desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i; + desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs); + } + } +} + +static void ixp2000_err_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static void ixp2000_err_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static struct irqchip ixp2000_err_irq_chip = { + .ack = ixp2000_err_irq_mask, + .mask = ixp2000_err_irq_mask, + .unmask = ixp2000_err_irq_unmask +}; + static struct irqchip ixp2000_pci_irq_chip = { .ack = ixp2000_pci_irq_mask, .mask = ixp2000_pci_irq_mask, @@ -411,7 +444,7 @@ static struct irqchip ixp2000_pci_irq_chip = { static void ixp2000_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); + ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); } static void ixp2000_irq_unmask(unsigned int irq) @@ -443,7 +476,7 @@ void __init ixp2000_init_irq(void) ixp2000_reg_write(IXP2000_GPIO_INCR, -1); /* clear PCI interrupt sources */ - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); /* * Certain bits in the IRQ status register of the @@ -460,6 +493,18 @@ void __init ixp2000_init_irq(void) } else set_irq_flags(irq, 0); } + for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { + if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & + IXP2000_VALID_ERR_IRQ_MASK) { + set_irq_chip(irq, &ixp2000_err_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + else + set_irq_flags(irq, 0); + } + set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); + /* * GPIO IRQs are invalid until someone sets the interrupt mode * by calling set_irq_type(). diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 643f5e1c3d93..61f6006241bd 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -64,6 +64,35 @@ static struct sys_timer enp2611_timer = { /************************************************************************* + * ENP-2611 I/O + *************************************************************************/ +static struct map_desc enp2611_io_desc[] __initdata = { + { + .virtual = ENP2611_CALEB_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), + .length = ENP2611_CALEB_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_0_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), + .length = ENP2611_PM3386_0_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_1_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), + .length = ENP2611_PM3386_1_SIZE, + .type = MT_IXP2000_DEVICE, + } +}; + +void __init enp2611_map_io(void) +{ + ixp2000_map_io(); + iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); +} + + +/************************************************************************* * ENP-2611 PCI *************************************************************************/ static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) @@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") .phys_io = IXP2000_UART_PHYS_BASE, .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, - .map_io = ixp2000_map_io, + .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, .init_machine = enp2611_init_machine, diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 05dfcb48c2b6..d628da56b4bc 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq) dummy = *board_irq_mask; dummy |= IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); #ifdef CONFIG_ARCH_IXDP2400 if (machine_is_ixdp2400()) @@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq) dummy = *board_irq_mask; dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); if (machine_is_ixdp2400()) ixp2000_release_slowport(&old_cfg); diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index b21249908ae4..e6a882f35da2 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -51,7 +51,7 @@ *************************************************************************/ static void ixdp2x01_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, + ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, IXP2000_BOARD_IRQ_MASK(irq)); } @@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void) /* Mask all interrupts from CPLD, disable simulation */ ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0); + ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { @@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); return 0; } @@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = { static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); return (ofs & IXDP2X01_FLASH_WINDOW_MASK); } @@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = { static void __init ixdp2x01_init_machine(void) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); ixdp2x01_flash_data.nr_banks = diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 522205acb316..d4bf1e1c0031 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); @@ -178,8 +178,8 @@ clear_master_aborts(void) local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c new file mode 100644 index 000000000000..43e234349d4a --- /dev/null +++ b/arch/arm/mach-ixp2000/uengine.c @@ -0,0 +1,474 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> +#include <asm/hardware.h> +#include <asm/arch/ixp2000-regs.h> +#include <asm/arch/uengine.h> +#include <asm/io.h> + +#define USTORE_ADDRESS 0x000 +#define USTORE_DATA_LOWER 0x004 +#define USTORE_DATA_UPPER 0x008 +#define CTX_ENABLES 0x018 +#define CC_ENABLE 0x01c +#define CSR_CTX_POINTER 0x020 +#define INDIRECT_CTX_STS 0x040 +#define ACTIVE_CTX_STS 0x044 +#define INDIRECT_CTX_SIG_EVENTS 0x048 +#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 +#define NN_PUT 0x080 +#define NN_GET 0x084 +#define TIMESTAMP_LOW 0x0c0 +#define TIMESTAMP_HIGH 0x0c4 +#define T_INDEX_BYTE_INDEX 0x0f4 +#define LOCAL_CSR_STATUS 0x180 + +u32 ixp2000_uengine_mask; + +static void *ixp2000_uengine_csr_area(int uengine) +{ + return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); +} + +/* + * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR + * space means that the microengine we tried to access was also trying + * to access its own CSR space on the same clock cycle as we did. When + * this happens, we lose the arbitration process by default, and the + * read or write we tried to do was not actually performed, so we try + * again until it succeeds. + */ +u32 ixp2000_uengine_csr_read(int uengine, int offset) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + u32 value; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + value = ixp2000_reg_read(reg); + } while (ixp2000_reg_read(local_csr_status) & 1); + + return value; +} +EXPORT_SYMBOL(ixp2000_uengine_csr_read); + +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + ixp2000_reg_write(reg, value); + } while (ixp2000_reg_read(local_csr_status) & 1); +} +EXPORT_SYMBOL(ixp2000_uengine_csr_write); + +void ixp2000_uengine_reset(u32 uengine_mask) +{ + ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); + ixp2000_reg_write(IXP2000_RESET1, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_reset); + +void ixp2000_uengine_set_mode(int uengine, u32 mode) +{ + /* + * CTL_STR_PAR_EN: unconditionally enable parity checking on + * control store. + */ + mode |= 0x10000000; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); + + /* + * Enable updating of condition codes. + */ + ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); + + /* + * Initialise other per-microengine registers. + */ + ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); + ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); + ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_set_mode); + +static int make_even_parity(u32 x) +{ + return hweight32(x) & 1; +} + +static void ustore_write(int uengine, u64 insn) +{ + /* + * Generate even parity for top and bottom 20 bits. + */ + insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; + insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; + + /* + * Write to microstore. The second write auto-increments + * the USTORE_ADDRESS index register. + */ + ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); + ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); +} + +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) +{ + int i; + + /* + * Start writing to microstore at address 0. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); + for (i = 0; i < insns; i++) { + u64 insn; + + insn = (((u64)ucode[0]) << 32) | + (((u64)ucode[1]) << 24) | + (((u64)ucode[2]) << 16) | + (((u64)ucode[3]) << 8) | + ((u64)ucode[4]); + ucode += 5; + + ustore_write(uengine, insn); + } + + /* + * Pad with a few NOPs at the end (to avoid the microengine + * aborting as it prefetches beyond the last instruction), unless + * we run off the end of the instruction store first, at which + * point the address register will wrap back to zero. + */ + for (i = 0; i < 4; i++) { + u32 addr; + + addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); + if (addr == 0x80000000) + break; + ustore_write(uengine, 0xf0000c0300ULL); + } + + /* + * End programming. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); +} +EXPORT_SYMBOL(ixp2000_uengine_load_microcode); + +void ixp2000_uengine_init_context(int uengine, int context, int pc) +{ + /* + * Select the right context for indirect access. + */ + ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); + + /* + * Initialise signal masks to immediately go to Ready state. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); + + /* + * Set program counter. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); +} +EXPORT_SYMBOL(ixp2000_uengine_init_context); + +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Enable the specified context to go to Executing state. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask |= ctx_mask << 8; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_start_contexts); + +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Disable the Ready->Executing transition. Note that this + * does not stop the context until it voluntarily yields. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask &= ~(ctx_mask << 8); + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); + +static int check_ixp_type(struct ixp2000_uengine_code *c) +{ + u32 product_id; + u32 rev; + + product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); + if (((product_id >> 16) & 0x1f) != 0) + return 0; + + switch ((product_id >> 8) & 0xff) { + case 0: /* IXP2800 */ + if (!(c->cpu_model_bitmask & 4)) + return 0; + break; + + case 1: /* IXP2850 */ + if (!(c->cpu_model_bitmask & 8)) + return 0; + break; + + case 2: /* IXP2400 */ + if (!(c->cpu_model_bitmask & 2)) + return 0; + break; + + default: + return 0; + } + + rev = product_id & 0xff; + if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) + return 0; + + return 1; +} + +static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) +{ + int offset; + int i; + + offset = 0; + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_a[i] >> 24) & 0xff; + b2 = (gpr_a[i] >> 16) & 0xff; + b1 = (gpr_a[i] >> 8) & 0xff; + b0 = gpr_a[i] & 0xff; + + // immed[@ai, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); + ucode[offset++] = (b0 << 2); + ucode[offset++] = 0x80 | i; + + // immed_w1[@ai, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); + ucode[offset++] = (b2 << 2); + ucode[offset++] = 0x80 | i; + } + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_b[i] >> 24) & 0xff; + b2 = (gpr_b[i] >> 16) & 0xff; + b1 = (gpr_b[i] >> 8) & 0xff; + b0 = gpr_b[i] & 0xff; + + // immed[@bi, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b0; + + // immed_w1[@bi, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b2; + } + + // ctx_arb[kill] + ucode[offset++] = 0xe0; + ucode[offset++] = 0x00; + ucode[offset++] = 0x01; + ucode[offset++] = 0x00; + ucode[offset++] = 0x00; +} + +static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) +{ + int per_ctx_regs; + u32 *gpr_a; + u32 *gpr_b; + u8 *ucode; + int i; + + gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL); + gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL); + ucode = kmalloc(513 * 5, GFP_KERNEL); + if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + return 1; + } + + per_ctx_regs = 16; + if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) + per_ctx_regs = 32; + + memset(gpr_a, 0, sizeof(gpr_a)); + memset(gpr_b, 0, sizeof(gpr_b)); + for (i = 0; i < 256; i++) { + struct ixp2000_reg_value *r = c->initial_reg_values + i; + u32 *bank; + int inc; + int j; + + if (r->reg == -1) + break; + + bank = (r->reg & 0x400) ? gpr_b : gpr_a; + inc = (r->reg & 0x80) ? 128 : per_ctx_regs; + + j = r->reg & 0x7f; + while (j < 128) { + bank[j] = r->value; + j += inc; + } + } + + generate_ucode(ucode, gpr_a, gpr_b); + ixp2000_uengine_load_microcode(uengine, ucode, 513); + ixp2000_uengine_init_context(uengine, 0, 0); + ixp2000_uengine_start_contexts(uengine, 0x01); + for (i = 0; i < 100; i++) { + u32 status; + + status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); + if (!(status & 0x80000000)) + break; + } + ixp2000_uengine_stop_contexts(uengine, 0x01); + + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + + return !!(i == 100); +} + +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) +{ + int ctx; + + if (!check_ixp_type(c)) + return 1; + + if (!(ixp2000_uengine_mask & (1 << uengine))) + return 1; + + ixp2000_uengine_reset(1 << uengine); + ixp2000_uengine_set_mode(uengine, c->uengine_parameters); + if (set_initial_registers(uengine, c)) + return 1; + ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); + + for (ctx = 0; ctx < 8; ctx++) + ixp2000_uengine_init_context(uengine, ctx, 0); + + return 0; +} +EXPORT_SYMBOL(ixp2000_uengine_load); + + +static int __init ixp2000_uengine_init(void) +{ + int uengine; + u32 value; + + /* + * Determine number of microengines present. + */ + switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { + case 0: /* IXP2800 */ + case 1: /* IXP2850 */ + ixp2000_uengine_mask = 0x00ff00ff; + break; + + case 2: /* IXP2400 */ + ixp2000_uengine_mask = 0x000f000f; + break; + + default: + printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", + (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); + ixp2000_uengine_mask = 0x00000000; + break; + } + + /* + * Reset microengines. + */ + ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask); + ixp2000_reg_write(IXP2000_RESET1, 0); + + /* + * Synchronise timestamp counters across all microengines. + */ + value = ixp2000_reg_read(IXP2000_MISC_CONTROL); + ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80); + for (uengine = 0; uengine < 32; uengine++) { + if (ixp2000_uengine_mask & (1 << uengine)) { + ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); + ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); + } + } + ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80); + + return 0; +} + +subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1f6857d7747d..b464bc88ff93 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -19,16 +19,20 @@ #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/hardware/sa1111.h> @@ -175,7 +179,7 @@ static struct platform_device sa1111_device = { static struct resource smc91x_resources[] = { [0] = { .name = "smc91x-regs", - .start = 0x0c000000, + .start = 0x0c000c00, .end = 0x0c0fffff, .flags = IORESOURCE_MEM, }, @@ -199,10 +203,75 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x04000000, + .end = 0x04000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lubbock_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00100000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00140000 + } +}; + +static struct flash_platform_data lubbock_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = lubbock_partitions, + .nr_parts = ARRAY_SIZE(lubbock_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lubbock_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lubbock_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lubbock_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, &lub_audio_device, &smc91x_device, + &lubbock_flash_device[0], + &lubbock_flash_device[1], }; static struct pxafb_mach_info sharp_lm8v31 __initdata = { @@ -224,18 +293,75 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = { .lccr3 = LCCR3_PCP | LCCR3_Acb(255), }; -static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data) +#define MMC_POLL_RATE msecs_to_jiffies(1000) + +static void lubbock_mmc_poll(unsigned long); +static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *); + +static struct timer_list mmc_timer = { + .function = lubbock_mmc_poll, +}; + +static void lubbock_mmc_poll(unsigned long data) +{ + unsigned long flags; + + /* clear any previous irq state, then ... */ + local_irq_save(flags); + LUB_IRQ_SET_CLR &= ~(1 << 0); + local_irq_restore(flags); + + /* poll until mmc/sd card is removed */ + if (LUB_IRQ_SET_CLR & (1 << 0)) + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + else { + (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL); + enable_irq(LUBBOCK_SD_IRQ); + } +} + +static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs) +{ + /* IRQ is level triggered; disable, and poll for removal */ + disable_irq(irq); + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + + return mmc_detect_int(irq, data, regs); +} + +static int lubbock_mci_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *, struct pt_regs *), + void *data) { /* setup GPIO for PXA25x MMC controller */ pxa_gpio_mode(GPIO6_MMCCLK_MD); pxa_gpio_mode(GPIO8_MMCCS0_MD); - return 0; + /* detect card insert/eject */ + mmc_detect_int = detect_int; + init_timer(&mmc_timer); + mmc_timer.data = (unsigned long) data; + return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, + SA_SAMPLE_RANDOM, "lubbock-sd-detect", data); +} + +static int lubbock_mci_get_ro(struct device *dev) +{ + return (LUB_MISC_RD & (1 << 2)) != 0; +} + +static void lubbock_mci_exit(struct device *dev, void *data) +{ + free_irq(LUBBOCK_SD_IRQ, data); + del_timer_sync(&mmc_timer); } static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = 1, .init = lubbock_mci_init, + .get_ro = lubbock_mci_get_ro, + .exit = lubbock_mci_exit, }; static void lubbock_irda_transceiver_mode(struct device *dev, int mode) @@ -258,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = { static void __init lubbock_init(void) { + int flashboot = (LUB_CONF_SWITCHES & 1); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); + + lubbock_flash_data[0].width = lubbock_flash_data[1].width = + (BOOT_DEF & 1) ? 2 : 4; + /* Compensate for the nROMBT switch which swaps the flash banks */ + printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", + flashboot?"Flash":"ROM", flashboot); + + lubbock_flash_data[flashboot^1].name = "application-flash"; + lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 887a8cb7b721..07892f4012d8 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -20,6 +20,9 @@ #include <linux/sched.h> #include <linux/bitops.h> #include <linux/fb.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/types.h> #include <asm/setup.h> @@ -27,10 +30,12 @@ #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/mainstone.h> @@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = { .dev = { .platform_data = &mst_audio_ops }, }; +static struct resource flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition mainstoneflash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +static struct flash_platform_data mst_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = mainstoneflash0_partitions, + .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device mst_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &mst_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &mst_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static void mainstone_backlight_power(int on) { if (on) { @@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &mst_audio_device, + &mst_flash_device[0], + &mst_flash_device[1], +}; + static void __init mainstone_init(void) { + int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + mst_flash_data[1].width = 4; + + /* Compensate for SW7 which swaps the flash banks */ + mst_flash_data[SW7].name = "processor-flash"; + mst_flash_data[SW7 ^ 1].name = "mainboard-flash"; + + printk(KERN_NOTICE "Mainstone configured to boot from %s\n", + mst_flash_data[0].name); + /* * On Mainstone, we route AC97_SYSCLK via GPIO45 to * the audio daughter card */ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - platform_device_register(&smc91x_device); - platform_device_register(&mst_audio_device); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" might be handy to select LCD type here */ diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig new file mode 100644 index 000000000000..4b63dc9eabfe --- /dev/null +++ b/arch/arm/mach-realview/Kconfig @@ -0,0 +1,11 @@ +menu "RealView platform type" + depends on ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView/EB platform" + default n + select ARM_GIC + help + Include support for the ARM(R) RealView Emulation Baseboard platform. + +endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile new file mode 100644 index 000000000000..8d37ea1605fd --- /dev/null +++ b/arch/arm/mach-realview/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +obj-y := core.o clock.o +obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot new file mode 100644 index 000000000000..c7e75acfe6c9 --- /dev/null +++ b/arch/arm/mach-realview/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c new file mode 100644 index 000000000000..002635c97bb6 --- /dev/null +++ b/arch/arm/mach-realview/clock.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/mach-realview/clock.c + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <asm/semaphore.h> +#include <asm/hardware/clock.h> +#include <asm/hardware/icst307.h> + +#include "clock.h" + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +int clk_use(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_use); + +void clk_unuse(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_unuse); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EIO; + + if (clk->setvco) { + struct icst307_vco vco; + + vco = icst307_khz_to_vco(clk->params, rate / 1000); + clk->rate = icst307_khz(clk->params, vco) * 1000; + + printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n", + clk->name, vco.s, vco.r, vco.v); + + clk->setvco(clk, vco); + ret = 0; + } + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * These are fixed clocks. + */ +static struct clk kmi_clk = { + .name = "KMIREFCLK", + .rate = 24000000, +}; + +static struct clk uart_clk = { + .name = "UARTCLK", + .rate = 24000000, +}; + +static struct clk mmci_clk = { + .name = "MCLK", + .rate = 33000000, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&kmi_clk); + clk_register(&uart_clk); + clk_register(&mmci_clk); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h new file mode 100644 index 000000000000..dadba695e181 --- /dev/null +++ b/arch/arm/mach-realview/clock.h @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-realview/clock.h + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct module; +struct icst307_params; + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + const struct icst307_params *params; + void *data; + void (*setvco)(struct clk *, struct icst307_vco vco); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c new file mode 100644 index 000000000000..482eb512ebe8 --- /dev/null +++ b/arch/arm/mach-realview/core.c @@ -0,0 +1,605 @@ +/* + * linux/arch/arm/mach-realview/core.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/amba.h> +#include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/icst307.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> + +#include <asm/hardware/gic.h> + +#include "core.h" +#include "clock.h" + +#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) + +/* + * This is the RealView sched_clock implementation. This has + * a resolution of 41.7ns, and a maximum value of about 179s. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v; + + v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; + do_div(v, 3); + + return v; +} + + +#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) + +static int realview_flash_init(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); + + return 0; +} + +static void realview_flash_exit(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static void realview_flash_set_vpp(int on) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + if (on) + val |= REALVIEW_FLASHPROG_FLVPPEN; + else + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static struct flash_platform_data realview_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = realview_flash_init, + .exit = realview_flash_exit, + .set_vpp = realview_flash_set_vpp, +}; + +static struct resource realview_flash_resource = { + .start = REALVIEW_FLASH_BASE, + .end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +struct platform_device realview_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &realview_flash_data, + }, + .num_resources = 1, + .resource = &realview_flash_resource, +}; + +static struct resource realview_smc91x_resources[] = { + [0] = { + .start = REALVIEW_ETH_BASE, + .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ETH, + .end = IRQ_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_smc91x_resources), + .resource = realview_smc91x_resources, +}; + +#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) + +static unsigned int realview_mmc_status(struct device *dev) +{ + struct amba_device *adev = container_of(dev, struct amba_device, dev); + u32 mask; + + if (adev->res.start == REALVIEW_MMCI0_BASE) + mask = 1; + else + mask = 2; + + return readl(REALVIEW_SYSMCI) & mask; +} + +struct mmc_platform_data realview_mmc0_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +struct mmc_platform_data realview_mmc1_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +/* + * Clock handling + */ +static const struct icst307_params realview_oscvco_params = { + .ref = 24000, + .vco_max = 200000, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, +}; + +static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +{ + void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + u32 val; + + val = readl(sys_osc) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + writel(0xa05f, sys_lock); + writel(val, sys_osc); + writel(0, sys_lock); +} + +struct clk realview_clcd_clk = { + .name = "CLCDCLK", + .params = &realview_oscvco_params, + .setvco = realview_oscvco_set, +}; + +/* + * CLCD support. + */ +#define SYS_CLCD_MODE_MASK (3 << 0) +#define SYS_CLCD_MODE_888 (0 << 0) +#define SYS_CLCD_MODE_5551 (1 << 0) +#define SYS_CLCD_MODE_565_RLSB (2 << 0) +#define SYS_CLCD_MODE_565_BLSB (3 << 0) +#define SYS_CLCD_NLCDIOON (1 << 2) +#define SYS_CLCD_VDDPOSSWITCH (1 << 3) +#define SYS_CLCD_PWR3V5SWITCH (1 << 4) +#define SYS_CLCD_ID_MASK (0x1f << 8) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_3_8_in = { + .mode = { + .name = "Sanyo QVGA", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel epson_2_2_in = { + .mode = { + .name = "Epson QCIF", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ +static struct clcd_panel *realview_clcd_panel(void) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + struct clcd_panel *panel = &vga; + u32 val; + + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel = &sanyo_3_8_in; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel = &sanyo_2_5_in; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel = &epson_2_2_in; + else if (val == SYS_CLCD_ID_VGA) + panel = &vga; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel = &vga; + } + + return panel; +} + +/* + * Disable all display connectors on the interface module. + */ +static void realview_clcd_disable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +/* + * Enable the relevant connector on the interface module. + */ +static void realview_clcd_enable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_MODE_MASK; + + switch (fb->fb.var.green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + val |= SYS_CLCD_MODE_565_RLSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* + * Set the MUX + */ + writel(val, sys_clcd); + + /* + * And now enable the PSUs + */ + val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +static unsigned long framesize = SZ_1M; + +static int realview_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = realview_clcd_panel(); + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void realview_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +struct clcd_board clcd_plat_data = { + .name = "RealView", + .check = clcdfb_check, + .decode = clcdfb_decode, + .disable = realview_clcd_disable, + .enable = realview_clcd_enable, + .setup = realview_clcd_setup, + .mmap = realview_clcd_mmap, + .remove = realview_clcd_remove, +}; + +#ifdef CONFIG_LEDS +#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) + +void realview_leds_event(led_event_t ledevt) +{ + unsigned long flags; + u32 val; + + local_irq_save(flags); + val = readl(VA_LEDS_BASE); + + switch (ledevt) { + case led_idle_start: + val = val & ~REALVIEW_SYS_LED0; + break; + + case led_idle_end: + val = val | REALVIEW_SYS_LED0; + break; + + case led_timer: + val = val ^ REALVIEW_SYS_LED1; + break; + + case led_halted: + val = 0; + break; + + default: + break; + } + + writel(val, VA_LEDS_BASE); + local_irq_restore(flags); +} +#endif /* CONFIG_LEDS */ + +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE) +#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20) +#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE) +#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TIMER_RELOAD (TIMER_INTERVAL) +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +/* + * Returns number of ms since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + */ +static unsigned long realview_gettimeoffset(void) +{ + unsigned long ticks1, ticks2, status; + + /* + * Get the current number of ticks. Note that there is a race + * condition between us reading the timer and checking for + * an interrupt. We get around this by ensuring that the + * counter has not reloaded between our two reads. + */ + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + do { + ticks1 = ticks2; + status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET) + + ((IRQ_TIMERINT0_1 >> 5) << 2)); + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + } while (ticks2 > ticks1); + + /* + * Number of ticks since last interrupt. + */ + ticks1 = TIMER_RELOAD - ticks2; + + /* + * Interrupt pending? If so, we've reloaded once already. + * + * FIXME: Need to check this is effectively timer 0 that expires + */ + if (status & IRQMASK_TIMERINT0_1) + ticks1 += TIMER_RELOAD; + + /* + * Convert the ticks to usecs + */ + return TICKS2USECS(ticks1); +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + // ...clear the interrupt + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); + + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction realview_timer_irq = { + .name = "RealView Timer Tick", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = realview_timer_interrupt, +}; + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init realview_timer_init(void) +{ + u32 val; + + /* + * set clock frequency: + * REALVIEW_REFCLK is 32KHz + * REALVIEW_TIMCLK is 1MHz + */ + val = readl(__io_address(REALVIEW_SCTL_BASE)); + writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, + __io_address(REALVIEW_SCTL_BASE)); + + /* + * Initialise to a known state (all timers off) + */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); + + /* + * Make irqs happen for the system timer + */ + setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq); +} + +struct sys_timer realview_timer = { + .init = realview_timer_init, + .offset = realview_gettimeoffset, +}; diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h new file mode 100644 index 000000000000..575599db74db --- /dev/null +++ b/arch/arm/mach-realview/core.h @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-realview/core.h + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_REALVIEW_H +#define __ASM_ARCH_REALVIEW_H + +#include <asm/hardware/amba.h> +#include <asm/io.h> + +#define __io_address(n) __io(IO_ADDRESS(n)) + +extern struct sys_timer realview_timer; + +#define AMBA_DEVICE(name,busid,base,plat) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .bus_id = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = REALVIEW_##base##_BASE, \ + .end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = base##_IRQ, \ + /* .dma = base##_DMA,*/ \ +} + +/* + * These devices are connected via the core APB bridge + */ +#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } + +#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } + +/* + * These devices are connected directly to the multi-layer AHB switch + */ +#define SMC_IRQ { NO_IRQ, NO_IRQ } +#define SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } +#define CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define DMAC_DMA { 0, 0 } + +/* + * These devices are connected via the core APB bridge + */ +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } +#define WATCHDOG_DMA { 0, 0 } +#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } +#define GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define RTC_DMA { 0, 0 } + +/* + * These devices are connected via the DMA APB bridge + */ +#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } +#define UART0_DMA { 15, 14 } +#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } +#define UART1_DMA { 13, 12 } +#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } +#define UART2_DMA { 11, 10 } +#define UART3_IRQ { IRQ_UART3, NO_IRQ } +#define UART3_DMA { 0x86, 0x87 } +#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SSP_DMA { 9, 8 } + + +extern struct platform_device realview_flash_device; +extern struct platform_device realview_smc91x_device; +extern struct mmc_platform_data realview_mmc0_plat_data; +extern struct mmc_platform_data realview_mmc1_plat_data; +extern struct clk realview_clcd_clk; +extern struct clcd_board clcd_plat_data; + +extern void realview_leds_event(led_event_t ledevt); + +#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c new file mode 100644 index 000000000000..267bb07e39b7 --- /dev/null +++ b/arch/arm/mach-realview/realview_eb.c @@ -0,0 +1,172 @@ +/* + * linux/arch/arm/mach-realview/realview_eb.c + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/amba.h> +#include <asm/hardware/icst307.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> + +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_eb_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + } +#endif +}; + +static void __init realview_eb_map_io(void) +{ + iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); +} + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", SMC, NULL); +AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); +} + +static void __init realview_eb_init(void) +{ + int i; + + clk_register(&realview_clcd_clk); + + platform_device_register(&realview_flash_device); + platform_device_register(&realview_smc91x_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_EB, "ARM-RealView EB") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = REALVIEW_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_eb_map_io, + .init_irq = gic_init_irq, + .timer = &realview_timer, + .init_machine = realview_eb_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 8f2a90bf940b..24d69019a843 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -17,6 +17,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2005 BJD Fixed __iomem warnings * 20-Sep-2005 BJD Added static to non-exported items + * 31-Oct-2005 BJD Added LCD setup for framebuffer */ #include <linux/kernel.h> @@ -43,6 +44,9 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/fb.h> #include "clock.h" #include "devs.h" @@ -97,6 +101,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { } }; +/* framebuffer lcd controller information */ + +static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = { + .regs = { + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \ + S3C2410_LCDCON1_TFT | \ + S3C2410_LCDCON1_CLKVAL(0x0C), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \ + S3C2410_LCDCON2_LINEVAL(319) | \ + S3C2410_LCDCON2_VFPD(6) | \ + S3C2410_LCDCON2_VSPW(2), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \ + S3C2410_LCDCON3_HOZVAL(239) | \ + S3C2410_LCDCON3_HFPD(35), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \ + S3C2410_LCDCON4_HSPW(7), + + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = 0xf82, + + .gpccon = 0xaa955699, + .gpccon_mask = 0xffc003cc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa95aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, + + .fixed_syncs = 1, + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .max = 320, + .min = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + static struct platform_device *rx3715_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -123,14 +187,12 @@ static void __init rx3715_init_irq(void) s3c24xx_init_irq(); } -#ifdef CONFIG_PM static void __init rx3715_init_machine(void) { s3c2410_pm_init(); + s3c24xx_fb_set_platdata(&rx3715_lcdcfg); } -#else -#define rx3715_init_machine NULL -#endif + MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben@fluff.org> */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c54e04c995ee..e3c14d6b4328 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -120,8 +120,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T - bool "Support ARM926T processor" if ARCH_INTEGRATOR - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX + bool "Support ARM926T processor" + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX select CPU_32v5 select CPU_ABRT_EV5TJ @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -250,6 +250,18 @@ config CPU_V6 select CPU_COPY_V6 select CPU_TLB_V6 +# ARMv6k +config CPU_32v6K + bool "Support ARM V6K processor extensions" if !SMP + depends on CPU_V6 + default y if SMP + help + Say Y here if your ARMv6 processor supports the 'K' extension. + This enables the kernel to use some instructions not present + on previous processors, and as such a kernel build with this + enabled will not boot on processors with do not support these + instructions. + # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fd079ff1fc53..c168f322ef8c 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -486,10 +486,17 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Ask the machine support to map in the statically mapped devices. - * After this point, we can start to touch devices again. */ if (mdesc->map_io) mdesc->map_io(); + + /* + * Finally flush the tlb again - this ensures that we're in a + * consistent state wrt the writebuffer if the writebuffer needs + * draining. After this point, we can start to touch devices + * again. + */ + local_flush_tlb_all(); } /* diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 1221fdde1769..fb5b40289de2 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -469,14 +469,14 @@ void __init create_mapping(struct map_desc *md) if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " - "0x%016llx at 0x%08lx in user region\n", + "0x%08llx at 0x%08lx in user region\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx " + printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " "overlaps vmalloc space\n", __pfn_to_phys((u64)md->pfn), md->virtual); } @@ -492,14 +492,14 @@ void __init create_mapping(struct map_desc *md) if(md->pfn >= 0x100000) { if(domain) { printk(KERN_ERR "MM: invalid domain in supersection " - "mapping for 0x%016llx at 0x%08lx\n", + "mapping for 0x%08llx at 0x%08lx\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if((md->virtual | md->length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { printk(KERN_ERR "MM: cannot create mapping for " - "0x%016llx at 0x%08lx invalid alignment\n", + "0x%08llx at 0x%08lx invalid alignment\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 330fd2b68075..3984226a8b98 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -398,7 +398,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); */ static u16 toshiba_line_size; -static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = { +static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { { .ident = "Toshiba PS5 based laptop", .matches = { diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 1642375fb14e..3b4248cff9a7 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -26,6 +26,10 @@ config MMU bool default y +config SWIOTLB + bool + default y + config RWSEM_XCHGADD_ALGORITHM bool default y diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index cb1af597370b..ac64664a1807 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -9,7 +9,7 @@ lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \ bitop.o checksum.o clear_page.o csum_partial_copy.o \ clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o \ flush.o ip_fast_csum.o do_csum.o \ - memset.o strlen.o swiotlb.o + memset.o strlen.o lib-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o lib-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c deleted file mode 100644 index 96edcc0fdcd9..000000000000 --- a/arch/ia64/lib/swiotlb.c +++ /dev/null @@ -1,759 +0,0 @@ -/* - * Dynamic DMA mapping support. - * - * This implementation is for IA-64 platforms that do not support - * I/O TLBs (aka DMA address translation hardware). - * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> - * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> - * Copyright (C) 2000, 2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * - * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API. - * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid - * unnecessary i-cache flushing. - * 04/07/.. ak Better overflow handling. Assorted fixes. - */ - -#include <linux/cache.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ctype.h> - -#include <asm/io.h> -#include <asm/pci.h> -#include <asm/dma.h> - -#include <linux/init.h> -#include <linux/bootmem.h> - -#define OFFSET(val,align) ((unsigned long) \ - ( (val) & ( (align) - 1))) - -#define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset) -#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG)) - -/* - * Maximum allowable number of contiguous slabs to map, - * must be a power of 2. What is the appropriate value ? - * The complexity of {map,unmap}_single is linearly dependent on this value. - */ -#define IO_TLB_SEGSIZE 128 - -/* - * log of the size of each IO TLB slab. The number of slabs is command line - * controllable. - */ -#define IO_TLB_SHIFT 11 - -#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) - -/* - * Minimum IO TLB size to bother booting with. Systems with mainly - * 64bit capable cards will only lightly use the swiotlb. If we can't - * allocate a contiguous 1MB, we're probably in trouble anyway. - */ -#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) - -int swiotlb_force; - -/* - * Used to do a quick range check in swiotlb_unmap_single and - * swiotlb_sync_single_*, to see if the memory was in fact allocated by this - * API. - */ -static char *io_tlb_start, *io_tlb_end; - -/* - * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and - * io_tlb_end. This is command line adjustable via setup_io_tlb_npages. - */ -static unsigned long io_tlb_nslabs; - -/* - * When the IOMMU overflows we return a fallback buffer. This sets the size. - */ -static unsigned long io_tlb_overflow = 32*1024; - -void *io_tlb_overflow_buffer; - -/* - * This is a free list describing the number of free entries available from - * each index - */ -static unsigned int *io_tlb_list; -static unsigned int io_tlb_index; - -/* - * We need to save away the original address corresponding to a mapped entry - * for the sync operations. - */ -static unsigned char **io_tlb_orig_addr; - -/* - * Protect the above data structures in the map and unmap calls - */ -static DEFINE_SPINLOCK(io_tlb_lock); - -static int __init -setup_io_tlb_npages(char *str) -{ - if (isdigit(*str)) { - io_tlb_nslabs = simple_strtoul(str, &str, 0); - /* avoid tail segment of size < IO_TLB_SEGSIZE */ - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - if (*str == ',') - ++str; - if (!strcmp(str, "force")) - swiotlb_force = 1; - return 1; -} -__setup("swiotlb=", setup_io_tlb_npages); -/* make io_tlb_overflow tunable too? */ - -/* - * Statically reserve bounce buffer space and initialize bounce buffer data - * structures for the software IO TLB used to implement the PCI DMA API. - */ -void -swiotlb_init_with_default_size (size_t default_size) -{ - unsigned long i; - - if (!io_tlb_nslabs) { - io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - - /* - * Get IO TLB memory from the low pages - */ - io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs * - (1 << IO_TLB_SHIFT), 0x100000000); - if (!io_tlb_start) - panic("Cannot allocate SWIOTLB buffer"); - io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); - - /* - * Allocate and initialize the free list array. This array is used - * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE - * between io_tlb_start and io_tlb_end. - */ - io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int)); - for (i = 0; i < io_tlb_nslabs; i++) - io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); - io_tlb_index = 0; - io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *)); - - /* - * Get the overflow emergency buffer - */ - io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow); - printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n", - virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); -} - -void -swiotlb_init (void) -{ - swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ -} - -/* - * Systems with larger DMA zones (those that don't support ISA) can - * initialize the swiotlb later using the slab allocator if needed. - * This should be just like above, but with some error catching. - */ -int -swiotlb_late_init_with_default_size (size_t default_size) -{ - unsigned long i, req_nslabs = io_tlb_nslabs; - unsigned int order; - - if (!io_tlb_nslabs) { - io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - - /* - * Get IO TLB memory from the low pages - */ - order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); - io_tlb_nslabs = SLABS_PER_PAGE << order; - - while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { - io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, - order); - if (io_tlb_start) - break; - order--; - } - - if (!io_tlb_start) - goto cleanup1; - - if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { - printk(KERN_WARNING "Warning: only able to allocate %ld MB " - "for software IO TLB\n", (PAGE_SIZE << order) >> 20); - io_tlb_nslabs = SLABS_PER_PAGE << order; - } - io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); - memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); - - /* - * Allocate and initialize the free list array. This array is used - * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE - * between io_tlb_start and io_tlb_end. - */ - io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, - get_order(io_tlb_nslabs * sizeof(int))); - if (!io_tlb_list) - goto cleanup2; - - for (i = 0; i < io_tlb_nslabs; i++) - io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); - io_tlb_index = 0; - - io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, - get_order(io_tlb_nslabs * sizeof(char *))); - if (!io_tlb_orig_addr) - goto cleanup3; - - memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); - - /* - * Get the overflow emergency buffer - */ - io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, - get_order(io_tlb_overflow)); - if (!io_tlb_overflow_buffer) - goto cleanup4; - - printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " - "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, - virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); - - return 0; - -cleanup4: - free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * - sizeof(char *))); - io_tlb_orig_addr = NULL; -cleanup3: - free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * - sizeof(int))); - io_tlb_list = NULL; - io_tlb_end = NULL; -cleanup2: - free_pages((unsigned long)io_tlb_start, order); - io_tlb_start = NULL; -cleanup1: - io_tlb_nslabs = req_nslabs; - return -ENOMEM; -} - -static inline int -address_needs_mapping(struct device *hwdev, dma_addr_t addr) -{ - dma_addr_t mask = 0xffffffff; - /* If the device has a mask, use it, otherwise default to 32 bits */ - if (hwdev && hwdev->dma_mask) - mask = *hwdev->dma_mask; - return (addr & ~mask) != 0; -} - -/* - * Allocates bounce buffer and returns its kernel virtual address. - */ -static void * -map_single(struct device *hwdev, char *buffer, size_t size, int dir) -{ - unsigned long flags; - char *dma_addr; - unsigned int nslots, stride, index, wrap; - int i; - - /* - * For mappings greater than a page, we limit the stride (and - * hence alignment) to a page size. - */ - nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; - if (size > PAGE_SIZE) - stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT)); - else - stride = 1; - - if (!nslots) - BUG(); - - /* - * Find suitable number of IO TLB entries size that will fit this - * request and allocate a buffer from that IO TLB pool. - */ - spin_lock_irqsave(&io_tlb_lock, flags); - { - wrap = index = ALIGN(io_tlb_index, stride); - - if (index >= io_tlb_nslabs) - wrap = index = 0; - - do { - /* - * If we find a slot that indicates we have 'nslots' - * number of contiguous buffers, we allocate the - * buffers from that slot and mark the entries as '0' - * indicating unavailable. - */ - if (io_tlb_list[index] >= nslots) { - int count = 0; - - for (i = index; i < (int) (index + nslots); i++) - io_tlb_list[i] = 0; - for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) - io_tlb_list[i] = ++count; - dma_addr = io_tlb_start + (index << IO_TLB_SHIFT); - - /* - * Update the indices to avoid searching in - * the next round. - */ - io_tlb_index = ((index + nslots) < io_tlb_nslabs - ? (index + nslots) : 0); - - goto found; - } - index += stride; - if (index >= io_tlb_nslabs) - index = 0; - } while (index != wrap); - - spin_unlock_irqrestore(&io_tlb_lock, flags); - return NULL; - } - found: - spin_unlock_irqrestore(&io_tlb_lock, flags); - - /* - * Save away the mapping from the original address to the DMA address. - * This is needed when we sync the memory. Then we sync the buffer if - * needed. - */ - io_tlb_orig_addr[index] = buffer; - if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) - memcpy(dma_addr, buffer, size); - - return dma_addr; -} - -/* - * dma_addr is the kernel virtual address of the bounce buffer to unmap. - */ -static void -unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) -{ - unsigned long flags; - int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; - int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; - - /* - * First, sync the memory before unmapping the entry - */ - if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL))) - /* - * bounce... copy the data back into the original buffer * and - * delete the bounce buffer. - */ - memcpy(buffer, dma_addr, size); - - /* - * Return the buffer to the free list by setting the corresponding - * entries to indicate the number of contigous entries available. - * While returning the entries to the free list, we merge the entries - * with slots below and above the pool being returned. - */ - spin_lock_irqsave(&io_tlb_lock, flags); - { - count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ? - io_tlb_list[index + nslots] : 0); - /* - * Step 1: return the slots to the free list, merging the - * slots with superceeding slots - */ - for (i = index + nslots - 1; i >= index; i--) - io_tlb_list[i] = ++count; - /* - * Step 2: merge the returned slots with the preceding slots, - * if available (non zero) - */ - for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) - io_tlb_list[i] = ++count; - } - spin_unlock_irqrestore(&io_tlb_lock, flags); -} - -static void -sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir) -{ - int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; - - /* - * bounce... copy the data back into/from the original buffer - * XXX How do you handle DMA_BIDIRECTIONAL here ? - */ - if (dir == DMA_FROM_DEVICE) - memcpy(buffer, dma_addr, size); - else if (dir == DMA_TO_DEVICE) - memcpy(dma_addr, buffer, size); - else - BUG(); -} - -void * -swiotlb_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) -{ - unsigned long dev_addr; - void *ret; - int order = get_order(size); - - /* - * XXX fix me: the DMA API should pass us an explicit DMA mask - * instead, or use ZONE_DMA32 (ia64 overloads ZONE_DMA to be a ~32 - * bit range instead of a 16MB one). - */ - flags |= GFP_DMA; - - ret = (void *)__get_free_pages(flags, order); - if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) { - /* - * The allocated memory isn't reachable by the device. - * Fall back on swiotlb_map_single(). - */ - free_pages((unsigned long) ret, order); - ret = NULL; - } - if (!ret) { - /* - * We are either out of memory or the device can't DMA - * to GFP_DMA memory; fall back on - * swiotlb_map_single(), which will grab memory from - * the lowest available address range. - */ - dma_addr_t handle; - handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE); - if (dma_mapping_error(handle)) - return NULL; - - ret = phys_to_virt(handle); - } - - memset(ret, 0, size); - dev_addr = virt_to_phys(ret); - - /* Confirm address can be DMA'd by device */ - if (address_needs_mapping(hwdev, dev_addr)) { - printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n", - (unsigned long long)*hwdev->dma_mask, dev_addr); - panic("swiotlb_alloc_coherent: allocated memory is out of " - "range for device"); - } - *dma_handle = dev_addr; - return ret; -} - -void -swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - if (!(vaddr >= (void *)io_tlb_start - && vaddr < (void *)io_tlb_end)) - free_pages((unsigned long) vaddr, get_order(size)); - else - /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ - swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE); -} - -static void -swiotlb_full(struct device *dev, size_t size, int dir, int do_panic) -{ - /* - * Ran out of IOMMU space for this operation. This is very bad. - * Unfortunately the drivers cannot handle this operation properly. - * unless they check for pci_dma_mapping_error (most don't) - * When the mapping is small enough return a static buffer to limit - * the damage, or panic when the transfer is too big. - */ - printk(KERN_ERR "PCI-DMA: Out of SW-IOMMU space for %lu bytes at " - "device %s\n", size, dev ? dev->bus_id : "?"); - - if (size > io_tlb_overflow && do_panic) { - if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic("PCI-DMA: Memory would be corrupted\n"); - if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic("PCI-DMA: Random memory would be DMAed\n"); - } -} - -/* - * Map a single buffer of the indicated size for DMA in streaming mode. The - * PCI address to use is returned. - * - * Once the device is given the dma address, the device owns this memory until - * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed. - */ -dma_addr_t -swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir) -{ - unsigned long dev_addr = virt_to_phys(ptr); - void *map; - - if (dir == DMA_NONE) - BUG(); - /* - * If the pointer passed in happens to be in the device's DMA window, - * we can safely return the device addr and not worry about bounce - * buffering it. - */ - if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force) - return dev_addr; - - /* - * Oh well, have to allocate and map a bounce buffer. - */ - map = map_single(hwdev, ptr, size, dir); - if (!map) { - swiotlb_full(hwdev, size, dir, 1); - map = io_tlb_overflow_buffer; - } - - dev_addr = virt_to_phys(map); - - /* - * Ensure that the address returned is DMA'ble - */ - if (address_needs_mapping(hwdev, dev_addr)) - panic("map_single: bounce buffer is not DMA'ble"); - - return dev_addr; -} - -/* - * Since DMA is i-cache coherent, any (complete) pages that were written via - * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to - * flush them when they get mapped into an executable vm-area. - */ -static void -mark_clean(void *addr, size_t size) -{ - unsigned long pg_addr, end; - - pg_addr = PAGE_ALIGN((unsigned long) addr); - end = (unsigned long) addr + size; - while (pg_addr + PAGE_SIZE <= end) { - struct page *page = virt_to_page(pg_addr); - set_bit(PG_arch_1, &page->flags); - pg_addr += PAGE_SIZE; - } -} - -/* - * Unmap a single streaming mode DMA translation. The dma_addr and size must - * match what was provided for in a previous swiotlb_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guaranteed to see - * whatever the device wrote there. - */ -void -swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size, - int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - unmap_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -/* - * Make physical memory consistent for a single streaming mode DMA translation - * after a transfer. - * - * If you perform a swiotlb_map_single() but wish to interrogate the buffer - * using the cpu, yet do not wish to teardown the PCI dma mapping, you must - * call this function before doing so. At the next point you give the PCI dma - * address back to the card, you must first perform a - * swiotlb_dma_sync_for_device, and then the device again owns the buffer - */ -void -swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr, - size_t size, int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - sync_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -void -swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr, - size_t size, int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - sync_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -/* - * Map a set of buffers described by scatterlist in streaming mode for DMA. - * This is the scatter-gather version of the above swiotlb_map_single - * interface. Here the scatter gather list elements are each tagged with the - * appropriate dma address and length. They are obtained via - * sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for swiotlb_map_single are the - * same here. - */ -int -swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems, - int dir) -{ - void *addr; - unsigned long dev_addr; - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) { - addr = SG_ENT_VIRT_ADDRESS(sg); - dev_addr = virt_to_phys(addr); - if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) { - sg->dma_address = (dma_addr_t) virt_to_phys(map_single(hwdev, addr, sg->length, dir)); - if (!sg->dma_address) { - /* Don't panic here, we expect map_sg users - to do proper error handling. */ - swiotlb_full(hwdev, sg->length, dir, 0); - swiotlb_unmap_sg(hwdev, sg - i, i, dir); - sg[0].dma_length = 0; - return 0; - } - } else - sg->dma_address = dev_addr; - sg->dma_length = sg->length; - } - return nelems; -} - -/* - * Unmap a set of streaming mode DMA translations. Again, cpu read rules - * concerning calls here are the same as for swiotlb_unmap_single() above. - */ -void -swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems, - int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); -} - -/* - * Make physical memory consistent for a set of streaming mode DMA translations - * after a transfer. - * - * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules - * and usage. - */ -void -swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, - int nelems, int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - sync_single(hwdev, (void *) sg->dma_address, - sg->dma_length, dir); -} - -void -swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, - int nelems, int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - sync_single(hwdev, (void *) sg->dma_address, - sg->dma_length, dir); -} - -int -swiotlb_dma_mapping_error(dma_addr_t dma_addr) -{ - return (dma_addr == virt_to_phys(io_tlb_overflow_buffer)); -} - -/* - * Return whether the given PCI device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during PCI bus mastering, then you would pass 0x00ffffff as the mask to - * this function. - */ -int -swiotlb_dma_supported (struct device *hwdev, u64 mask) -{ - return (virt_to_phys (io_tlb_end) - 1) <= mask; -} - -EXPORT_SYMBOL(swiotlb_init); -EXPORT_SYMBOL(swiotlb_map_single); -EXPORT_SYMBOL(swiotlb_unmap_single); -EXPORT_SYMBOL(swiotlb_map_sg); -EXPORT_SYMBOL(swiotlb_unmap_sg); -EXPORT_SYMBOL(swiotlb_sync_single_for_cpu); -EXPORT_SYMBOL(swiotlb_sync_single_for_device); -EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu); -EXPORT_SYMBOL(swiotlb_sync_sg_for_device); -EXPORT_SYMBOL(swiotlb_dma_mapping_error); -EXPORT_SYMBOL(swiotlb_alloc_coherent); -EXPORT_SYMBOL(swiotlb_free_coherent); -EXPORT_SYMBOL(swiotlb_dma_supported); diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig index 87f2d6587c56..2d59ba1a79ba 100644 --- a/arch/m68knommu/defconfig +++ b/arch/m68knommu/defconfig @@ -99,7 +99,7 @@ CONFIG_M5272C3=y # CONFIG_NETtel is not set # CONFIG_CPU16B is not set # CONFIG_MOD5272 is not set -CONFIG_MOTOROLA=y +CONFIG_FREESCALE=y # CONFIG_LARGE_ALLOCS is not set CONFIG_4KSTACKS=y CONFIG_RAMAUTO=y @@ -554,7 +554,6 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y -CONFIG_MAGIC_ROM_PTR=y # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 984a10630714..2d22bf03484e 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -279,7 +279,7 @@ _GLOBAL(ppc32_rt_sigsuspend) bne syscall_exit /* If sigsuspend() returns zero, we are going into a signal handler. We may need to call audit_syscall_exit() to mark the exit from sigsuspend() */ -#ifdef CONFIG_AUDIT +#ifdef CONFIG_AUDITSYSCALL ld r3,PACACURRENT(r13) ld r4,AUDITCONTEXT(r3) cmpdi 0,r4,0 diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index 1c07949a13d6..f7de6df60dd7 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -6,10 +6,11 @@ #ifndef __UM_NET_KERN_H #define __UM_NET_KERN_H -#include "linux/netdevice.h" -#include "linux/skbuff.h" -#include "linux/socket.h" -#include "linux/list.h" +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/skbuff.h> +#include <linux/socket.h> +#include <linux/list.h> struct uml_net { struct list_head list; diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index bcdd0a805fe7..14328cab5d3a 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o -obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o @@ -41,7 +40,6 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/mach-default/topology.o -swiotlb-$(CONFIG_SWIOTLB) += ../../ia64/lib/swiotlb.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o diff --git a/arch/x86_64/lib/bitops.c b/arch/x86_64/lib/bitops.c index a29fb75b33ac..95b6d9639fba 100644 --- a/arch/x86_64/lib/bitops.c +++ b/arch/x86_64/lib/bitops.c @@ -5,19 +5,23 @@ #undef find_first_bit #undef find_next_bit -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. - */ -inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) +static inline long +__find_first_zero_bit(const unsigned long * addr, unsigned long size) { long d0, d1, d2; long res; + /* + * We must test the size in words, not in bits, because + * otherwise incoming sizes in the range -63..-1 will not run + * any scasq instructions, and then the flags used by the je + * instruction will have whatever random value was in place + * before. Nobody should call us like that, but + * find_next_zero_bit() does when offset and size are at the + * same word and it fails to find a zero itself. + */ + size += 63; + size >>= 6; if (!size) return 0; asm volatile( @@ -30,12 +34,30 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) " shlq $3,%%rdi\n" " addq %%rdi,%%rdx" :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) - :"0" (0ULL), "1" ((size + 63) >> 6), "2" (addr), "3" (-1ULL), - [addr] "r" (addr) : "memory"); + :"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL), + [addr] "S" (addr) : "memory"); + /* + * Any register would do for [addr] above, but GCC tends to + * prefer rbx over rsi, even though rsi is readily available + * and doesn't have to be saved. + */ return res; } /** + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +long find_first_zero_bit(const unsigned long * addr, unsigned long size) +{ + return __find_first_zero_bit (addr, size); +} + +/** * find_next_zero_bit - find the first zero bit in a memory region * @addr: The address to base the search on * @offset: The bitnumber to start searching at @@ -43,7 +65,7 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) */ long find_next_zero_bit (const unsigned long * addr, long size, long offset) { - unsigned long * p = ((unsigned long *) addr) + (offset >> 6); + const unsigned long * p = addr + (offset >> 6); unsigned long set = 0; unsigned long res, bit = offset&63; @@ -63,8 +85,8 @@ long find_next_zero_bit (const unsigned long * addr, long size, long offset) /* * No zero yet, search remaining full words for a zero */ - res = find_first_zero_bit ((const unsigned long *)p, - size - 64 * (p - (unsigned long *) addr)); + res = __find_first_zero_bit (p, size - 64 * (p - addr)); + return (offset + set + res); } @@ -74,6 +96,19 @@ __find_first_bit(const unsigned long * addr, unsigned long size) long d0, d1; long res; + /* + * We must test the size in words, not in bits, because + * otherwise incoming sizes in the range -63..-1 will not run + * any scasq instructions, and then the flags used by the jz + * instruction will have whatever random value was in place + * before. Nobody should call us like that, but + * find_next_bit() does when offset and size are at the same + * word and it fails to find a one itself. + */ + size += 63; + size >>= 6; + if (!size) + return 0; asm volatile( " repe; scasq\n" " jz 1f\n" @@ -83,8 +118,7 @@ __find_first_bit(const unsigned long * addr, unsigned long size) " shlq $3,%%rdi\n" " addq %%rdi,%%rax" :"=a" (res), "=&c" (d0), "=&D" (d1) - :"0" (0ULL), - "1" ((size + 63) >> 6), "2" (addr), + :"0" (0ULL), "1" (size), "2" (addr), [addr] "r" (addr) : "memory"); return res; } |