857 files changed, 28471 insertions, 138946 deletions

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index a51bb9fb3c89..c7fe94d03a1e 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -19,6 +19,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
@@ -51,6 +52,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(25),
+	.wp_pin		= GPIO_PIN_PE(0),
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -170,6 +176,7 @@ static int __init atngw100_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 
 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 86b363c1c25b..e11659b732fa 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -234,6 +234,9 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 07b21b121eef..021d51217184 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -14,6 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
@@ -1278,20 +1279,32 @@ static struct clk atmel_mci0_pclk = {
 	.index		= 9,
 };
 
-struct platform_device *__init at32_add_device_mci(unsigned int id)
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
-	struct platform_device *pdev;
+	struct mci_platform_data	_data;
+	struct platform_device		*pdev;
+	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
 
 	pdev = platform_device_alloc("atmel_mci", id);
 	if (!pdev)
-		return NULL;
+		goto fail;
 
 	if (platform_device_add_resources(pdev, atmel_mci0_resource,
 				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct mci_platform_data));
+	}
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail;
 
 	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
 	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
@@ -1300,12 +1313,19 @@ struct platform_device *__init at32_add_device_mci(unsigned int id)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
+	if (data) {
+		if (data->detect_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->detect_pin, 0);
+		if (data->wp_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->wp_pin, 0);
+	}
+
 	atmel_mci0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 4f165c93be42..edae117fcc2b 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -19,36 +19,6 @@
 
 #include "pci-frv.h"
 
-#if 0
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-#endif
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index fabaf08d9a69..3ab8373103ec 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -55,6 +55,10 @@ void (*ia64_mark_idle)(int);
 
 unsigned long boot_option_idle_override = 0;
 EXPORT_SYMBOL(boot_option_idle_override);
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 318b81100623..68c978be9a51 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -395,7 +395,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (kvm->vcpus[i]->cpu != -1) {
 			call_data.vcpu = kvm->vcpus[i];
 			smp_call_function_single(kvm->vcpus[i]->cpu,
-					vcpu_global_purge, &call_data, 0, 1);
+					vcpu_global_purge, &call_data, 1);
 		} else
 			printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
 
@@ -1693,7 +1693,7 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 		wake_up_interruptible(&vcpu->wq);
 
 	if (vcpu->guest_mode)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0);
+		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
 }
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index 091f936c4485..0c69d9ec92d4 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -130,7 +130,7 @@ static struct ia64_pal_retval pal_cache_flush(struct kvm_vcpu *vcpu)
 	args.cache_type = gr29;
 	args.operation = gr30;
 	smp_call_function(remote_pal_cache_flush,
-				(void *)&args, 1, 1);
+				(void *)&args, 1);
 	if (args.status != 0)
 		printk(KERN_ERR"pal_cache_flush error!,"
 				"status:0x%lx\n", args.status);
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
index 6ee00effbad2..0a68b5a85f86 100644
--- a/arch/m68knommu/kernel/comempci.c
+++ b/arch/m68knommu/kernel/comempci.c
@@ -375,15 +375,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 
 /*****************************************************************************/
 
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
-{
-	printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n",
-		__FILE__, __LINE__);
-}
-
-
-/*****************************************************************************/
-
 /*
  *	Local routines to interrcept the standard I/O and vector handling
  *	code. Don't include this 'till now - initialization code above needs
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d2be3ffca280..d21df5f1b1f3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -181,38 +181,6 @@ config LEMOTE_FULONG
 	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
 
-config MIPS_ATLAS
-	bool "MIPS Atlas board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select MIPS_BOARDS_GEN
-	select MIPS_BONITO64
-	select PCI_GT64XXX_PCI0
-	select MIPS_MSC
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
-	select SYS_SUPPORTS_SMARTMIPS
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This enables support for the MIPS Technologies Atlas evaluation
-	  board.
-
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -249,26 +217,6 @@ config MIPS_MALTA
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
-config MIPS_SEAD
-	bool "MIPS SEAD board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select MIPS_BOARDS_GEN
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	help
-	  This enables support for the MIPS Technologies SEAD evaluation
-	  board.
-
 config MIPS_SIM
 	bool 'MIPS simulator (MIPSsim)'
 	select CEVT_R4K
@@ -437,6 +385,8 @@ config SGI_IP28
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -602,65 +552,11 @@ config SNI_RM
 	  Technology and now in turn merged with Fujitsu.  Say Y here to
 	  support this machine type.
 
-config TOSHIBA_JMR3927
-	bool "Toshiba JMR-TX3927 board"
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select MIPS_TX3927
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
+config MACH_TX39XX
+	bool "Toshiba TX39 series based machines"
 
-config TOSHIBA_RBTX4927
-	bool "Toshiba RBTX49[23]7 board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_TXX9
-	select I8259 if TOSHIBA_FPCIB0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This Toshiba board is based on the TX4927 processor. Say Y here to
-	  support this machine type
-
-config TOSHIBA_RBTX4938
-	bool "Toshiba RBTX4938 board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
-	help
-	  This Toshiba board is based on the TX4938 processor. Say Y here to
-	  support this machine type
+config MACH_TX49XX
+	bool "Toshiba TX49 series based machines"
 
 config WR_PPMC
 	bool "Wind River PPMC board"
@@ -694,8 +590,7 @@ source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 
 endmenu
@@ -939,10 +834,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
 	bool
 
-config MIPS_TX3927
-	bool
-	select HAS_TXX9_SERIAL
-
 config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
@@ -979,6 +870,9 @@ config SGI_HAS_DS1286
 config SGI_HAS_INDYDOG
 	bool
 
+config SGI_HAS_HAL2
+	bool
+
 config SGI_HAS_SEEQ
 	bool
 
@@ -2065,10 +1959,6 @@ source "fs/Kconfig.binfmt"
 config TRAD_SIGNALS
 	bool
 
-config BINFMT_IRIX
-	bool "Include IRIX binary compatibility"
-	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
-
 config MIPS32_COMPAT
 	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
 	depends on 64BIT
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ad36c946ff96..356453322b49 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,7 +14,7 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y :=
+cflags-y := -ffunction-sections
 
 #
 # Select the object file format to substitute into the linker script.
@@ -305,36 +305,14 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
 
 #
-# For all MIPS, Inc. eval boards
-#
-core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
-
-#
-# MIPS Atlas board
-#
-core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.bin
-
-#
 # MIPS Malta board
 #
-core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
-cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
+core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
+cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 
 #
-# MIPS SEAD board
-#
-core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
-cflags-$(CONFIG_MIPS_SEAD)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD)		:= vmlinux.srec
-
-#
 # MIPS SIM
 #
 core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
@@ -377,12 +355,6 @@ core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
 cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
 
 #
-# NEC VR4133
-#
-core-$(CONFIG_NEC_CMBVR4133)	+= arch/mips/vr41xx/nec-cmbvr4133/
-load-$(CONFIG_NEC_CMBVR4133)	+= 0xffffffff80100000
-
-#
 # ZAO Networks Capcella (VR4131)
 #
 load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
@@ -573,29 +545,30 @@ endif
 all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 
 #
+# Common TXx9
+#
+core-$(CONFIG_MACH_TX39XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx
+load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
+core-$(CONFIG_MACH_TX49XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
+load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
+
+#
 # Toshiba JMR-TX3927 board
 #
-core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
-				   arch/mips/jmr3927/common/
-cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
-load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
+core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
 
 #
 # Toshiba RBTX4927 board or
 # Toshiba RBTX4937 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
+core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
 
 #
 # Toshiba RBTX4938 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
 
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 74d6d4a593be..dc8a67efac28 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
@@ -77,14 +78,14 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ohci_device = {
 	.name		= "au1xxx-ohci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ohci_resources),
 	.resource	= au1xxx_usb_ohci_resources,
@@ -106,14 +107,14 @@ static struct resource au1100_lcd_resources[] = {
 	}
 };
 
-static u64 au1100_lcd_dmamask = ~(u32)0;
+static u64 au1100_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1100_lcd_device = {
 	.name           = "au1100-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1100_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
 	.resource       = au1100_lcd_resources,
@@ -135,14 +136,14 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 	},
 };
 
-static u64 ehci_dmamask = ~(u32)0;
+static u64 ehci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ehci_device = {
 	.name		= "au1xxx-ehci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
 	.resource	= au1xxx_usb_ehci_resources,
@@ -180,14 +181,14 @@ static struct resource au1xxx_mmc_resources[] = {
 	}
 };
 
-static u64 udc_dmamask = ~(u32)0;
+static u64 udc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_gdt_device = {
 	.name		= "au1xxx-udc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
 	.resource	= au1xxx_usb_gdt_resources,
@@ -207,14 +208,14 @@ static struct resource au1xxx_usb_otg_resources[] = {
 	},
 };
 
-static u64 uoc_dmamask = ~(u32)0;
+static u64 uoc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_otg_device = {
 	.name		= "au1xxx-uoc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &uoc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
 	.resource	= au1xxx_usb_otg_resources,
@@ -233,27 +234,27 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static u64 au1200_lcd_dmamask = ~(u32)0;
+static u64 au1200_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1200_lcd_device = {
 	.name           = "au1200-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1200_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
 	.resource       = au1200_lcd_resources,
 };
 
-static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+static u64 au1xxx_mmc_dmamask =  DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_mmc_device = {
 	.name = "au1xxx-mmc",
 	.id = 0,
 	.dev = {
 		.dma_mask               = &au1xxx_mmc_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
 	.resource       = au1xxx_mmc_resources,
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index 9807be37c32f..8b5914d1241f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -24,6 +24,9 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
 
 static struct gpio_keys_button mtx1_gpio_button[] = {
 	{
@@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = {
 	}
 };
 
+static struct mtd_partition mtx1_mtd_partitions[] = {
+	{
+		.name	= "filesystem",
+		.size	= 0x01C00000,
+		.offset	= 0,
+	},
+	{
+		.name	= "yamon",
+		.size	= 0x00100000,
+		.offset	= MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.size	= 0x002c0000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+	{
+		.name	= "yamon env",
+		.size	= 0x00040000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data mtx1_flash_data = {
+	.width		= 4,
+	.nr_parts	= 4,
+	.parts		= mtx1_mtd_partitions,
+};
+
+static struct resource mtx1_mtd_resource = {
+	.start	= 0x1e000000,
+	.end	= 0x1fffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mtx1_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &mtx1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &mtx1_mtd_resource,
+};
+
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
-	&mtx1_button
+	&mtx1_button,
+	&mtx1_mtd,
 };
 
 static int __init mtx1_register_devices(void)
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c
index 5930110b9b6d..f8fb0aeac571 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/au1000/pb1200/platform.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
@@ -36,14 +37,14 @@ static struct resource ide_resources[] = {
 	}
 };
 
-static u64 ide_dmamask = ~(u32)0;
+static u64 ide_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device ide_device = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
 		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(ide_resources),
 	.resource	= ide_resources
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index d73833b7c781..237926288d6d 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o
+obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
new file mode 100644
index 000000000000..0720e4fae311
--- /dev/null
+++ b/arch/mips/cobalt/lcd.c
@@ -0,0 +1,55 @@
+/*
+ *  Registration of Cobalt LCD platform device.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource cobalt_lcd_resource __initdata = {
+	.start	= 0x1f000000,
+	.end	= 0x1f00001f,
+	.flags	= IORESOURCE_MEM,
+};
+
+static __init int cobalt_lcd_add(void)
+{
+	struct platform_device *pdev;
+	int retval;
+
+	pdev = platform_device_alloc("cobalt-lcd", -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1);
+	if (retval)
+		goto err_free_device;
+
+	retval = platform_device_add(pdev);
+	if (retval)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(pdev);
+
+	return retval;
+}
+device_initcall(cobalt_lcd_add);
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
deleted file mode 100644
index 3443f6cd57bb..000000000000
--- a/arch/mips/configs/atlas_defconfig
+++ /dev/null
@@ -1,1472 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:35 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MIPS_ATLAS=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_MSC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_LAN_SAA9730=y
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index c0e42e74dfbd..d8694332b344 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -16,9 +16,7 @@ CONFIG_BCM47XX=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 3b42cea2e402..a3bbbf067a3b 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 08:11:19 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 17:02:55 2008
 #
 CONFIG_MIPS=y
 
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -148,6 +146,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -156,6 +155,7 @@ CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+# CONFIG_MIPS_CMP is not set
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -223,6 +223,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -241,12 +242,14 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -302,7 +305,6 @@ CONFIG_BINFMT_ELF32=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -399,9 +401,11 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -600,7 +604,7 @@ CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -617,11 +621,12 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -650,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
@@ -675,7 +681,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -685,7 +694,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -730,12 +738,17 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -797,7 +810,6 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -815,6 +827,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -822,6 +835,7 @@ CONFIG_NETXEN_NIC=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -867,6 +881,7 @@ CONFIG_SERIO_RAW=m
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -903,7 +918,6 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -914,13 +928,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -946,6 +953,7 @@ CONFIG_I2C_SIBYTE=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -955,23 +963,18 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -984,12 +987,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1015,6 +1028,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,13 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1123,7 +1135,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1194,6 +1205,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1204,6 +1216,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1217,6 +1230,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1237,53 +1251,82 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1292,9 +1335,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index a94f14b5c8fa..185df23fd460 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index b7295e988381..2678b7ec3351 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 36578968d386..ebb8ad62b3a3 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 5a90740c363a..ad4e5ef65592 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 76f37a1159fe..d0dc2e83ad35 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 508c91944f30..9155082313c8 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 0c2c70d21db9..e4e324422cd9 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 58c2cd68c3a7..9e65e6a2dcb3 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 90d81f5dcebc..1bd84d42b14f 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index f9a003c2b3a1..634bb4eaf132 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 15efacc75d73..3572e80356d2 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -27,9 +27,7 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 5887a1735fba..620980081a30 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -14,9 +14,7 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 4f5e56c9335e..cc8e6bf2b245 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f40e437bd9e5..138c575a0151 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index ec188be9a67a..822b01f643e3 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 2c5c624c5d42..fe4699df9626 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 56148745e8f2..bbacc35d804f 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MACH_JAZZ=y
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index a7cd67753aac..9d5bd2a0af3d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 23:07:36 2007
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:01:36 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,28 +37,37 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-CONFIG_TOSHIBA_JMR3927=y
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_MACH_TX39XX=y
+# CONFIG_MACH_TX49XX is not set
 # CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_JMR3927=y
+CONFIG_SOC_TX3927=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_TXX9=y
+CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_TXX9=y
-CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
@@ -104,13 +114,20 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,18 +161,25 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -168,6 +192,14 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -189,20 +221,19 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -212,6 +243,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -245,25 +277,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -271,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -279,6 +308,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -307,6 +337,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -318,10 +349,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -329,7 +356,7 @@ CONFIG_BLK_DEV=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -339,10 +366,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -351,6 +395,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -358,13 +406,13 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -379,6 +427,7 @@ CONFIG_TC35815=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -400,7 +449,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -424,6 +472,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -431,7 +480,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -463,22 +511,30 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# SPI support
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -495,29 +551,46 @@ CONFIG_TXX9_WDT=y
 # CONFIG_WDTPCI is not set
 
 #
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -526,7 +599,9 @@ CONFIG_TXX9_WDT=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -551,9 +626,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -561,23 +637,6 @@ CONFIG_RTC_DRV_DS1742=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -590,12 +649,10 @@ CONFIG_RTC_DRV_DS1742=y
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -622,7 +679,7 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -630,17 +687,15 @@ CONFIG_RAMFS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -656,10 +711,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
@@ -667,13 +718,15 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -687,6 +740,7 @@ CONFIG_CMDLINE=""
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index e6aef999854c..bc9159fda728 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -15,9 +15,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 CONFIG_LASAT=y
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3d0da952811c..74daa0cf87e6 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -68,7 +66,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 4f6bce99d5cf..2c0a6314e901 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_MIPS_SIM=y
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 27e23fc9363a..8c720e51795b 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index b12b73f6d74f..59d19472b161 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index fa3aa3919448..bacf0dd0e345 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -14,9 +14,7 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 1d0157d3a5bb..6dfe6f793cef 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index d0491a05ee58..c965a87e6a96 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 16d78d3cd2aa..0778996c682f 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 780c7fc24b82..37c7b5ffd474 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 267f21ed1d0f..893e5c4ab66d 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
deleted file mode 100644
index 470f6f4d3ea2..000000000000
--- a/arch/mips/configs/rbhma4200_defconfig
+++ /dev/null
@@ -1,669 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:55:57 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-CONFIG_TOSHIBA_RBTX4927=y
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_TOSHIBA_FPCIB0 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-CONFIG_CPU_TX49XX=y
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_TX49XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NE2000=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_TXX9_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-CONFIG_RTC_DRV_DS1742=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 5a39f56b175e..e42aed5a38bb 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:59:53 2007
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:03:21 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,10 +37,15 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_TOSHIBA_RBTX4938=y
+# CONFIG_MACH_TX39XX is not set
+CONFIG_MACH_TX49XX=y
 # CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_RBTX4927=y
+CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_SOC_TX4927=y
+CONFIG_SOC_TX4938=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 
 #
 # Multiplex Pin Select
@@ -47,21 +53,30 @@ CONFIG_TOSHIBA_RBTX4938=y
 CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_PCI_TX4927=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K=y
+CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
@@ -94,6 +109,7 @@ CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_TX49XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -115,13 +131,20 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,19 +179,26 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -181,9 +211,18 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -205,20 +244,19 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
 CONFIG_MMU=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -228,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -262,26 +301,22 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -289,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -297,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -325,10 +362,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -340,10 +378,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -351,7 +385,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -361,10 +395,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -374,6 +425,10 @@ CONFIG_MII=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -381,13 +436,13 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -402,6 +457,7 @@ CONFIG_TC35815=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -426,6 +482,7 @@ CONFIG_TC35815=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -449,17 +506,11 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -473,9 +524,25 @@ CONFIG_SPI_TXX9=y
 #
 CONFIG_SPI_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -492,29 +559,46 @@ CONFIG_TXX9_WDT=m
 # CONFIG_WDTPCI is not set
 
 #
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -522,7 +606,9 @@ CONFIG_TXX9_WDT=m
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -542,16 +628,18 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 #
 # SPI RTC drivers
 #
-CONFIG_RTC_DRV_RS5C348=y
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+CONFIG_RTC_DRV_RS5C348=y
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -559,23 +647,6 @@ CONFIG_RTC_DRV_RS5C348=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -588,12 +659,10 @@ CONFIG_RTC_DRV_RS5C348=y
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -622,7 +691,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -630,18 +699,16 @@ CONFIG_RAMFS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -658,10 +725,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
@@ -669,13 +732,15 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 CONFIG_SYS_SUPPORTS_KGDB=y
 
@@ -690,6 +755,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 56371b860eb0..0f4da0325ea4 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 4b8799802788..1ea97865f2ce 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
deleted file mode 100644
index 3ee75b15c0b0..000000000000
--- a/arch/mips/configs/sead_defconfig
+++ /dev/null
@@ -1,642 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:28:10 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_SEAD=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=18432
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 8dd3ae39bcad..b5059881bc7e 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 2ba240e897c6..b06a716bf23f 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index a5d0f3c55ed1..46512cf7ce04 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index edf90b321fe6..b437eb7f8672 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 2e3c683b2052..fc2c56731b98 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index b6178ffbc523..7f86c43d1bda 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c
index 0f791eb6bb66..5e92b3a9c5b8 100644
--- a/arch/mips/emma2rh/common/prom.c
+++ b/arch/mips/emma2rh/common/prom.c
@@ -34,12 +34,11 @@
 
 const char *get_system_type(void)
 {
-	switch (mips_machtype) {
-	case MACH_NEC_MARKEINS:
-		return "NEC EMMA2RH Mark-eins";
-	default:
-		return "Unknown NEC board";
-	}
+#if defined(CONFIG_MARKEINS)
+	return "NEC EMMA2RH Mark-eins";
+#else
+#error  Unknown NEC board
+#endif
 }
 
 /* [jsun@junsun.net] PMON passes arguments in C main() style */
@@ -63,10 +62,10 @@ void __init prom_init(void)
 	}
 
 #if defined(CONFIG_MARKEINS)
-	mips_machtype = MACH_NEC_MARKEINS;
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
+#else
+#error  Unknown NEC board
 #endif
-
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 23066985a734..0ce9acf10c39 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -22,7 +22,6 @@
 struct smatch {
 	char *arcname;
 	char *liname;
-	int type;
 	int flags;
 };
 
@@ -30,47 +29,38 @@ static struct smatch mach_table[] = {
 	{
 		.arcname	= "SGI-IP22",
 		.liname		= "SGI Indy",
-		.type		= MACH_SGI_IP22,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP27",
 		.liname		= "SGI Origin",
-		.type		= MACH_SGI_IP27,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP28",
 		.liname		= "SGI IP28",
-		.type		= MACH_SGI_IP28,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP30",
 		.liname		= "SGI Octane",
-		.type		= MACH_SGI_IP30,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP32",
 		.liname		= "SGI O2",
-		.type		= MACH_SGI_IP32,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "Microsoft-Jazz",
 		.liname		= "Jazz MIPS_Magnum_4000",
-		.type		= MACH_MIPS_MAGNUM_4000,
 		.flags		= 0,
 	}, {
 		.arcname	= "PICA-61",
 		.liname		= "Jazz Acer_PICA_61",
-		.type		= MACH_ACER_PICA_61,
 		.flags		= 0,
 	}, {
 		.arcname	= "RM200PCI",
 		.liname		= "SNI RM200_PCI",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}, {
 		.arcname	= "RM200PCI-R5K",
 		.liname		= "SNI RM200_PCI-R5K",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}
 };
@@ -121,6 +111,5 @@ void __init prom_identify_arch(void)
 	mach = string_to_mach(iname);
 	system_type = mach->liname;
 
-	mips_machtype = mach->type;
 	prom_flags = mach->flags;
 }
diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c
index c355cff38f6c..cc5474b24f06 100644
--- a/arch/mips/gt64120/wrppmc/reset.c
+++ b/arch/mips/gt64120/wrppmc/reset.c
@@ -5,10 +5,12 @@
  *
  * Copyright (C) 1997 Ralf Baechle
  */
+#include <linux/irqflags.h>
 #include <linux/kernel.h>
 
 #include <asm/cacheflush.h>
 #include <asm/mipsregs.h>
+#include <asm/processor.h>
 
 void wrppmc_machine_restart(char *command)
 {
@@ -32,15 +34,7 @@ void wrppmc_machine_halt(void)
 
 	printk(KERN_NOTICE "You can safely turn off the power\n");
 	while (1) {
-		__asm__(
-			".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0"
-		);
+		if (cpu_wait)
+			cpu_wait();
 	}
 }
-
-void wrppmc_machine_power_off(void)
-{
-	wrppmc_machine_halt();
-}
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 728ef6a80edd..ca65c84031a7 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -98,11 +98,10 @@ void __init plat_mem_setup(void)
 {
 	extern void wrppmc_machine_restart(char *command);
 	extern void wrppmc_machine_halt(void);
-	extern void wrppmc_machine_power_off(void);
 
 	_machine_restart = wrppmc_machine_restart;
 	_machine_halt	 = wrppmc_machine_halt;
-	pm_power_off	 = wrppmc_machine_power_off;
+	pm_power_off	 = wrppmc_machine_halt;
 
 	/* This makes the operations of 'in/out[bwl]' to the
 	 * physical address ( < KSEG0) can work via KSEG1
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index a7947199c99b..f60524e8bc44 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -76,10 +76,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(JAZZ_PORT_BASE);
 #ifdef CONFIG_EISA
-	if (mips_machtype == MACH_MIPS_MAGNUM_4000)
-		EISA_bus = 1;
+	EISA_bus = 1;
 #endif
-	isa_slot_offset = 0xe3000000;
 
 	/* request I/O space for devices used on all i[345]86 PCs */
 	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile
deleted file mode 100644
index 8fd4fcccf10e..000000000000
--- a/arch/mips/jmr3927/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the common code of TOSHIBA JMR-TX3927 board
-#
-
-obj-y	 += prom.o puts.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c
deleted file mode 100644
index c611ab497888..000000000000
--- a/arch/mips/jmr3927/common/puts.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Based on arch/mips/au1000/common/puts.c
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/jmr3927/tx3927.h>
-
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c
deleted file mode 100644
index 700b9cf8eb9d..000000000000
--- a/arch/mips/jmr3927/rbhma3100/init.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * arch/mips/jmr3927/common/init.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <asm/jmr3927/jmr3927.h>
-
-extern void  __init prom_init_cmdline(void);
-
-const char *get_system_type(void)
-{
-	return "Toshiba"
-#ifdef CONFIG_TOSHIBA_JMR3927
-	       " JMR_TX3927"
-#endif
-	;
-}
-
-extern void puts(const char *cp);
-
-void __init prom_init(void)
-{
-#ifdef CONFIG_TOSHIBA_JMR3927
-	/* CCFG */
-	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
-#endif
-
-	prom_init_cmdline();
-	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 65e46a6d4178..0fd31974ba28 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -20,9 +20,6 @@ obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
-binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
-			   irix5sys.o sysirix.o
-
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
@@ -63,14 +60,13 @@ obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
-obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
+obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
 obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
 obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
-obj-$(CONFIG_BINFMT_IRIX)	+= binfmt_irix.o
 obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 9dccfa4752b2..9ae813eb782e 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -10,6 +10,8 @@
 #include <linux/console.h>
 #include <linux/init.h>
 
+#include <asm/setup.h>
+
 extern void prom_putchar(char);
 
 static void __init
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index b1436a857998..c6854d9df926 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -47,23 +47,25 @@ static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
 
 static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
 static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
 			     int value)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	txx9_gpio_set_raw(offset, value);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 38fa1a194bf4..b6ac55162b9a 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -80,7 +80,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
  * !using_apic_timer decisions in do_timer_interrupt_hook()
  */
-struct clock_event_device pit_clockevent = {
+static struct clock_event_device pit_clockevent = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= init_pit_timer,
diff --git a/arch/mips/kernel/irix5sys.S b/arch/mips/kernel/irix5sys.S
deleted file mode 100644
index eeef891093ed..000000000000
--- a/arch/mips/kernel/irix5sys.S
+++ /dev/null
@@ -1,1041 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * 32-bit IRIX5 ABI system call table derived from original file 'irix5sys.h'
- * created by David S. Miller.
- *
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#include <asm/asm.h>
-
-	/*
-	 * Key:
-	 *         V == Valid and should work as expected for most cases.
-	 *        HV == Half Valid, some things will work, some likely will not
-	 *        IV == InValid, certainly will not work at all yet
-	 *        ?V == ?'ably Valid, I have not done enough looking into it
-	 *        DC == Don't Care, a rats ass we couldn't give
-	 */
-
-	.macro	irix5syscalltable
-
-	sys	sys_syscall	0	/* 1000  sysindir()	       V*/
-	sys	sys_exit	1	/* 1001  exit()		       V*/
-	sys	sys_fork	0	/* 1002  fork()		       V*/
-	sys	sys_read	3	/* 1003  read()		       V*/
-	sys	sys_write	3	/* 1004  write()	       V*/
-	sys	sys_open	3	/* 1005  open()		       V*/
-	sys	sys_close	1	/* 1006  close()	       V*/
-	sys	irix_unimp	0	/* 1007  (XXX IRIX 4 wait)     V*/
-	sys	sys_creat	2	/* 1008  creat()	       V*/
-	sys	sys_link	2	/* 1009  link()		       V*/
-	sys	sys_unlink	1	/* 1010  unlink()	       V*/
-	sys	irix_exec	0	/* 1011  exec()		       V*/
-	sys	sys_chdir	1	/* 1012  chdir()	       V*/
-	sys	irix_gtime	0	/* 1013  time()		       V*/
-	sys	irix_unimp	0	/* 1014  (XXX IRIX 4 mknod)    V*/
-	sys	sys_chmod	2	/* 1015  chmod()	       V*/
-	sys	sys_chown	3	/* 1016  chown()	       V*/
-	sys	irix_brk	1	/* 1017  break()	       V*/
-	sys	irix_unimp	0	/* 1018  (XXX IRIX 4 stat)     V*/
-	sys	sys_lseek	3	/* 1019  lseek()     XXX64bit HV*/
-	sys	irix_getpid	0	/* 1020  getpid()	       V*/
-	sys	irix_mount	6	/* 1021  mount()	      IV*/
-	sys	sys_umount	1	/* 1022  umount()	       V*/
-	sys	sys_setuid	1	/* 1023  setuid()	       V*/
-	sys	irix_getuid	0	/* 1024  getuid()	       V*/
-	sys	irix_stime	1	/* 1025  stime()	       V*/
-	sys	irix_unimp	4	/* 1026  XXX ptrace()	      IV*/
-	sys	irix_alarm	1	/* 1027  alarm()	       V*/
-	sys	irix_unimp	0	/* 1028  (XXX IRIX 4 fstat)    V*/
-	sys	irix_pause	0	/* 1029  pause()	       V*/
-	sys	sys_utime	2	/* 1030  utime()	       V*/
-	sys	irix_unimp	0	/* 1031  nuthin'	       V*/
-	sys	irix_unimp	0	/* 1032  nobody home man...    V*/
-	sys	sys_access	2	/* 1033  access()	       V*/
-	sys	sys_nice	1	/* 1034  nice()		       V*/
-	sys	irix_statfs	2	/* 1035  statfs()	       V*/
-	sys	sys_sync	0	/* 1036  sync()		       V*/
-	sys	sys_kill	2	/* 1037  kill()		       V*/
-	sys	irix_fstatfs	2	/* 1038  fstatfs()	       V*/
-	sys	irix_setpgrp	1	/* 1039  setpgrp()	       V*/
-	sys	irix_syssgi	0	/* 1040  syssgi()	      HV*/
-	sys	sys_dup		1	/* 1041  dup()		       V*/
-	sys	sys_pipe	0	/* 1042  pipe()		       V*/
-	sys	irix_times	1	/* 1043  times()	       V*/
-	sys	irix_unimp	0	/* 1044  XXX profil()	      IV*/
-	sys	irix_unimp	0	/* 1045  XXX lock()	      IV*/
-	sys	sys_setgid	1	/* 1046  setgid()	       V*/
-	sys	irix_getgid	0	/* 1047  getgid()	       V*/
-	sys	irix_unimp	0	/* 1048  (XXX IRIX 4 ssig)     V*/
-	sys	irix_msgsys	6	/* 1049  sys_msgsys	       V*/
-	sys	sys_sysmips	4	/* 1050  sysmips()	      HV*/
-	sys	irix_unimp	0	/* 1051	 XXX sysacct()	      IV*/
-	sys	irix_shmsys	5	/* 1052  sys_shmsys	       V*/
-	sys	irix_semsys	0	/* 1053  sys_semsys	       V*/
-	sys	irix_ioctl	3	/* 1054  ioctl()	      HV*/
-	sys	irix_uadmin	0	/* 1055  XXX sys_uadmin()     HC*/
-	sys	irix_sysmp	0	/* 1056  sysmp()	      HV*/
-	sys	irix_utssys	4	/* 1057  sys_utssys()	      HV*/
-	sys	irix_unimp	0	/* 1058  nada enchilada	       V*/
-	sys	irix_exece	0	/* 1059  exece()	       V*/
-	sys	sys_umask	1	/* 1060  umask()	       V*/
-	sys	sys_chroot	1	/* 1061  chroot()	       V*/
-	sys	irix_fcntl	3	/* 1062  fcntl()	      ?V*/
-	sys	irix_ulimit	2	/* 1063  ulimit()	      HV*/
-	sys	irix_unimp	0	/* 1064  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1065  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1066  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1067  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1068  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1069  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1070  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1071  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1072  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1073  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1074  nuttin'	       V*/
-	sys	irix_unimp	0	/* 1075  XXX sys_getrlimit64()IV*/
-	sys	irix_unimp	0	/* 1076  XXX sys_setrlimit64()IV*/
-	sys	sys_nanosleep	2	/* 1077  nanosleep()	       V*/
-	sys	irix_lseek64	5	/* 1078  lseek64()	      ?V*/
-	sys	sys_rmdir	1	/* 1079  rmdir()	       V*/
-	sys	sys_mkdir	2	/* 1080  mkdir()	       V*/
-	sys	sys_getdents	3	/* 1081  getdents()	       V*/
-	sys	irix_sginap	1	/* 1082  sys_sginap()	       V*/
-	sys	irix_sgikopt	3	/* 1083  sys_sgikopt()	      DC*/
-	sys	sys_sysfs	3	/* 1084  sysfs()	      ?V*/
-	sys	irix_unimp	0	/* 1085  XXX sys_getmsg()     DC*/
-	sys	irix_unimp	0	/* 1086  XXX sys_putmsg()     DC*/
-	sys	sys_poll	3	/* 1087  poll()	               V*/
-	sys	irix_sigreturn	0	/* 1088  sigreturn()	      ?V*/
-	sys	sys_accept	3	/* 1089  accept()	       V*/
-	sys	sys_bind	3	/* 1090  bind()		       V*/
-	sys	sys_connect	3	/* 1091  connect()	       V*/
-	sys	irix_gethostid	0	/* 1092  sys_gethostid()      ?V*/
-	sys	sys_getpeername	3	/* 1093  getpeername()	       V*/
-	sys	sys_getsockname	3	/* 1094  getsockname()	       V*/
-	sys	sys_getsockopt	5	/* 1095  getsockopt()	       V*/
-	sys	sys_listen	2	/* 1096  listen()	       V*/
-	sys	sys_recv	4	/* 1097  recv()		       V*/
-	sys	sys_recvfrom	6	/* 1098  recvfrom()	       V*/
-	sys	sys_recvmsg	3	/* 1099  recvmsg()	       V*/
-	sys	sys_select	5	/* 1100  select()	       V*/
-	sys	sys_send	4	/* 1101  send()		       V*/
-	sys	sys_sendmsg	3	/* 1102  sendmsg()	       V*/
-	sys	sys_sendto	6	/* 1103  sendto()	       V*/
-	sys	irix_sethostid	1	/* 1104  sys_sethostid()      ?V*/
-	sys	sys_setsockopt	5	/* 1105  setsockopt()	       V*/
-	sys	sys_shutdown	2	/* 1106  shutdown()	      ?V*/
-	sys	irix_socket	3	/* 1107  socket()	       V*/
-	sys	sys_gethostname	2	/* 1108  sys_gethostname()    ?V*/
-	sys	sys_sethostname	2	/* 1109  sethostname()	      ?V*/
-	sys	irix_getdomainname 2	/* 1110  sys_getdomainname()  ?V*/
-	sys	sys_setdomainname 2	/* 1111  setdomainname()      ?V*/
-	sys	sys_truncate	2	/* 1112  truncate()	       V*/
-	sys	sys_ftruncate	2	/* 1113  ftruncate()	       V*/
-	sys	sys_rename	2	/* 1114  rename()	       V*/
-	sys	sys_symlink	2	/* 1115  symlink()	       V*/
-	sys	sys_readlink	3	/* 1116  readlink()	       V*/
-	sys	irix_unimp	0	/* 1117  XXX IRIX 4 lstat()   DC*/
-	sys	irix_unimp	0	/* 1118  nothin'	       V*/
-	sys	irix_unimp	0	/* 1119  XXX nfs_svc()	      DC*/
-	sys	irix_unimp	0	/* 1120  XXX nfs_getfh()      DC*/
-	sys	irix_unimp	0	/* 1121  XXX async_daemon()   DC*/
-	sys	irix_unimp	0	/* 1122  XXX exportfs()	      DC*/
-	sys	sys_setregid	2	/* 1123  setregid()	       V*/
-	sys	sys_setreuid	2	/* 1124  setreuid()	       V*/
-	sys	sys_getitimer	2	/* 1125  getitimer()	       V*/
-	sys	sys_setitimer	3	/* 1126  setitimer()	       V*/
-	sys	irix_unimp	1	/* 1127  XXX adjtime() 	      IV*/
-	sys	irix_gettimeofday 1	/* 1128  gettimeofday()	       V*/
-	sys	irix_unimp	0	/* 1129  XXX sproc()	      IV*/
-	sys	irix_prctl	0	/* 1130  prctl()	      HV*/
-	sys	irix_unimp	0	/* 1131  XXX procblk()	      IV*/
-	sys	irix_unimp	0	/* 1132  XXX sprocsp()	      IV*/
-	sys	irix_unimp	0	/* 1133  XXX sgigsc()	      IV*/
-	sys	irix_mmap32	6	/* 1134  mmap()	   XXXflags?  ?V*/
-	sys	sys_munmap	2	/* 1135  munmap()	       V*/
-	sys	sys_mprotect	3	/* 1136  mprotect()	       V*/
-	sys	sys_msync	4	/* 1137  msync()	       V*/
-	sys	irix_madvise	3	/* 1138  madvise()	      DC*/
-	sys	irix_pagelock	3	/* 1139  pagelock()	      IV*/
-	sys	irix_getpagesize 0	/* 1140  getpagesize()         V*/
-	sys	irix_quotactl	0	/* 1141  quotactl()	       V*/
-	sys	irix_unimp	0	/* 1142  nobody home man       V*/
-	sys	sys_getpgid	1	/* 1143  BSD getpgrp()	       V*/
-	sys	irix_BSDsetpgrp 2	/* 1143  BSD setpgrp()	       V*/
-	sys	sys_vhangup	0	/* 1144  vhangup()	       V*/
-	sys	sys_fsync	1	/* 1145  fsync()	       V*/
-	sys	sys_fchdir	1	/* 1146  fchdir()	       V*/
-	sys	sys_getrlimit	2	/* 1147  getrlimit()	      ?V*/
-	sys	sys_setrlimit	2	/* 1148  setrlimit()	      ?V*/
-	sys	sys_cacheflush	3	/* 1150  cacheflush()	      HV*/
-	sys	sys_cachectl	3	/* 1151  cachectl()	      HV*/
-	sys	sys_fchown	3	/* 1152  fchown()	      ?V*/
-	sys	sys_fchmod	2	/* 1153  fchmod()	      ?V*/
-	sys	irix_unimp	0	/* 1154  XXX IRIX 4 wait3()    V*/
-	sys	sys_socketpair	4	/* 1155  socketpair()	       V*/
-	sys	irix_systeminfo	3	/* 1156  systeminfo()	      IV*/
-	sys	irix_uname	1	/* 1157  uname()	      IV*/
-	sys	irix_xstat	3	/* 1158  xstat()	       V*/
-	sys	irix_lxstat	3	/* 1159  lxstat()	       V*/
-	sys	irix_fxstat	3	/* 1160  fxstat()	       V*/
-	sys	irix_xmknod	0	/* 1161  xmknod()	      ?V*/
-	sys	irix_sigaction	4	/* 1162  sigaction()	      ?V*/
-	sys	irix_sigpending	1	/* 1163  sigpending()	      ?V*/
-	sys	irix_sigprocmask 3	/* 1164  sigprocmask()	      ?V*/
-	sys	irix_sigsuspend	0	/* 1165  sigsuspend()	      ?V*/
-	sys	irix_sigpoll_sys 3	/* 1166  sigpoll_sys()	      IV*/
-	sys	irix_swapctl	2	/* 1167  swapctl()	      IV*/
-	sys	irix_getcontext	0	/* 1168  getcontext()	      HV*/
-	sys	irix_setcontext	0	/* 1169  setcontext()	      HV*/
-	sys	irix_waitsys	5	/* 1170  waitsys()	      IV*/
-	sys	irix_sigstack	2	/* 1171  sigstack()	      HV*/
-	sys	irix_sigaltstack 2	/* 1172  sigaltstack()	      HV*/
-	sys	irix_sigsendset	2	/* 1173  sigsendset()	      IV*/
-	sys	irix_statvfs	2	/* 1174  statvfs()	       V*/
-	sys	irix_fstatvfs	2	/* 1175  fstatvfs()	       V*/
-	sys	irix_unimp	0	/* 1176  XXX getpmsg()	      DC*/
-	sys	irix_unimp	0	/* 1177  XXX putpmsg()	      DC*/
-	sys	sys_lchown	3	/* 1178  lchown()	       V*/
-	sys	irix_priocntl	0	/* 1179  priocntl()	      DC*/
-	sys	irix_sigqueue	4	/* 1180  sigqueue()	      IV*/
-	sys	sys_readv	3	/* 1181  readv()	       V*/
-	sys	sys_writev	3	/* 1182  writev()	       V*/
-	sys	irix_truncate64 4	/* 1183  truncate64() XX32bit HV*/
-	sys	irix_ftruncate64 4	/* 1184  ftruncate64()XX32bit HV*/
-	sys	irix_mmap64	0	/* 1185  mmap64()     XX32bit HV*/
-	sys	irix_dmi	0	/* 1186  dmi()		      DC*/
-	sys	irix_pread	6	/* 1187  pread()	      IV*/
-	sys	irix_pwrite	6	/* 1188  pwrite()	      IV*/
-	sys	sys_fsync	1	/* 1189  fdatasync()  XXPOSIX HV*/
-	sys	irix_sgifastpath 7	/* 1190  sgifastpath() WHEEE  IV*/
-	sys	irix_unimp	0	/* 1191  XXX attr_get()	      DC*/
-	sys	irix_unimp	0	/* 1192  XXX attr_getf()      DC*/
-	sys	irix_unimp	0	/* 1193  XXX attr_set()	      DC*/
-	sys	irix_unimp	0	/* 1194  XXX attr_setf()      DC*/
-	sys	irix_unimp	0	/* 1195  XXX attr_remove()    DC*/
-	sys	irix_unimp	0	/* 1196  XXX attr_removef()   DC*/
-	sys	irix_unimp	0	/* 1197  XXX attr_list()      DC*/
-	sys	irix_unimp	0	/* 1198  XXX attr_listf()     DC*/
-	sys	irix_unimp	0	/* 1199  XXX attr_multi()     DC*/
-	sys	irix_unimp	0	/* 1200  XXX attr_multif()    DC*/
-	sys	irix_statvfs64	2	/* 1201  statvfs64()	       V*/
-	sys	irix_fstatvfs64	2	/* 1202  fstatvfs64()	       V*/
-	sys	irix_getmountid	2	/* 1203  getmountid()XXXfsids HV*/
-	sys	irix_nsproc	5	/* 1204  nsproc()	      IV*/
-	sys	irix_getdents64 3	/* 1205  getdents64()	      HV*/
-	sys	irix_unimp	0	/* 1206  XXX DFS garbage      DC*/
-	sys	irix_ngetdents	4	/* 1207  ngetdents() XXXeop   HV*/
-	sys	irix_ngetdents64 4	/* 1208  ngetdents64() XXXeop HV*/
-	sys	irix_unimp	0	/* 1209  nothin'	       V*/
-	sys	irix_unimp	0	/* 1210  XXX pidsprocsp()	*/
-	sys	irix_unimp	0	/* 1211  XXX rexec()		*/
-	sys	irix_unimp	0	/* 1212  XXX timer_create()	*/
-	sys	irix_unimp	0	/* 1213  XXX timer_delete()	*/
-	sys	irix_unimp	0	/* 1214  XXX timer_settime()	*/
-	sys	irix_unimp	0	/* 1215  XXX timer_gettime()	*/
-	sys	irix_unimp	0	/* 1216  XXX timer_setoverrun()	*/
-	sys	sys_sched_rr_get_interval 2		/* 1217  sched_rr_get_interval()V*/
-	sys	sys_sched_yield	0	/* 1218  sched_yield()	       V*/
-	sys	sys_sched_getscheduler 1 /* 1219  sched_getscheduler()  V*/
-	sys	sys_sched_setscheduler 3 /* 1220  sched_setscheduler()  V*/
-	sys	sys_sched_getparam 2	/* 1221  sched_getparam()      V*/
-	sys	sys_sched_setparam 2	/* 1222  sched_setparam()      V*/
-	sys	irix_unimp	0	/* 1223  XXX usync_cntl()	*/
-	sys	irix_unimp	0	/* 1224  XXX psema_cntl()	*/
-	sys	irix_unimp	0	/* 1225  XXX restartreturn()	*/
-
-	/* Just to pad things out nicely. */
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-
-	.endm
-
-	/*
-	 * Pre-compute the number of _instruction_ bytes needed to load
-	 * or store the arguments 6-8. Negative values are ignored.
-	 */
-	.macro  sys function, nargs
-	PTR	\function
-	LONG	(\nargs << 2) - (5 << 2)
-	.endm
-
-	.align	4
-EXPORT(sys_call_table_irix5)
-	irix5syscalltable
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
deleted file mode 100644
index 469c7237e5ba..000000000000
--- a/arch/mips/kernel/irixelf.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * irixelf.c: Code to load IRIX ELF executables conforming to the MIPS ABI.
- *            Based off of work by Eric Youngdale.
- *
- * Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/stat.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/a.out.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/binfmts.h>
-#include <linux/string.h>
-#include <linux/file.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/shm.h>
-#include <linux/personality.h>
-#include <linux/elfcore.h>
-
-#include <asm/mipsregs.h>
-#include <asm/namei.h>
-#include <asm/prctl.h>
-#include <asm/uaccess.h>
-
-#define DLINFO_ITEMS 12
-
-#include <linux/elf.h>
-
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
-static int load_irix_library(struct file *);
-static int irix_core_dump(long signr, struct pt_regs * regs,
-                          struct file *file, unsigned long limit);
-
-static struct linux_binfmt irix_format = {
-	.module		= THIS_MODULE,
-	.load_binary	= load_irix_binary,
-	.load_shlib	= load_irix_library,
-	.core_dump	= irix_core_dump,
-	.min_coredump	= PAGE_SIZE,
-};
-
-/* Debugging routines. */
-static char *get_elf_p_type(Elf32_Word p_type)
-{
-#ifdef DEBUG
-	switch (p_type) {
-	case PT_NULL:
-		return "PT_NULL";
-		break;
-
-	case PT_LOAD:
-		return "PT_LOAD";
-		break;
-
-	case PT_DYNAMIC:
-		return "PT_DYNAMIC";
-		break;
-
-	case PT_INTERP:
-		return "PT_INTERP";
-		break;
-
-	case PT_NOTE:
-		return "PT_NOTE";
-		break;
-
-	case PT_SHLIB:
-		return "PT_SHLIB";
-		break;
-
-	case PT_PHDR:
-		return "PT_PHDR";
-		break;
-
-	case PT_LOPROC:
-		return "PT_LOPROC/REGINFO";
-		break;
-
-	case PT_HIPROC:
-		return "PT_HIPROC";
-		break;
-
-	default:
-		return "PT_BOGUS";
-		break;
-	}
-#endif
-}
-
-static void print_elfhdr(struct elfhdr *ehp)
-{
-	int i;
-
-	pr_debug("ELFHDR: e_ident<");
-	for (i = 0; i < (EI_NIDENT - 1); i++)
-		pr_debug("%x ", ehp->e_ident[i]);
-	pr_debug("%x>\n", ehp->e_ident[i]);
-	pr_debug("        e_type[%04x] e_machine[%04x] e_version[%08lx]\n",
-	         (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine,
-	         (unsigned long) ehp->e_version);
-	pr_debug("        e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] "
-	         "e_flags[%08lx]\n",
-	         (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff,
-	         (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags);
-	pr_debug("        e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n",
-	         (unsigned short) ehp->e_ehsize,
-	         (unsigned short) ehp->e_phentsize,
-	         (unsigned short) ehp->e_phnum);
-	pr_debug("        e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n",
-	         (unsigned short) ehp->e_shentsize,
-	         (unsigned short) ehp->e_shnum,
-	         (unsigned short) ehp->e_shstrndx);
-}
-
-static void print_phdr(int i, struct elf_phdr *ep)
-{
-	pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] "
-	         "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type),
-	         (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr,
-	         (unsigned long) ep->p_paddr);
-	pr_debug("         p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] "
-	         "p_align[%08lx]\n", (unsigned long) ep->p_filesz,
-	         (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags,
-	         (unsigned long) ep->p_align);
-}
-
-static void dump_phdrs(struct elf_phdr *ep, int pnum)
-{
-	int i;
-
-	for (i = 0; i < pnum; i++, ep++) {
-		if ((ep->p_type == PT_LOAD) ||
-		    (ep->p_type == PT_INTERP) ||
-		    (ep->p_type == PT_PHDR))
-			print_phdr(i, ep);
-	}
-}
-
-static void set_brk(unsigned long start, unsigned long end)
-{
-	start = PAGE_ALIGN(start);
-	end = PAGE_ALIGN(end);
-	if (end <= start)
-		return;
-	down_write(&current->mm->mmap_sem);
-	do_brk(start, end - start);
-	up_write(&current->mm->mmap_sem);
-}
-
-
-/* We need to explicitly zero any fractional pages
- * after the data section (i.e. bss).  This would
- * contain the junk from the file that should not
- * be in memory.
- */
-static void padzero(unsigned long elf_bss)
-{
-	unsigned long nbyte;
-
-	nbyte = elf_bss & (PAGE_SIZE-1);
-	if (nbyte) {
-		nbyte = PAGE_SIZE - nbyte;
-		clear_user((void __user *) elf_bss, nbyte);
-	}
-}
-
-static unsigned long * create_irix_tables(char * p, int argc, int envc,
-	struct elfhdr * exec, unsigned int load_addr,
-	unsigned int interp_load_addr, struct pt_regs *regs,
-	struct elf_phdr *ephdr)
-{
-	elf_addr_t *argv;
-	elf_addr_t *envp;
-	elf_addr_t *sp, *csp;
-
-	pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] "
-	         "load_addr[%08x] interp_load_addr[%08x]\n",
-	         p, argc, envc, load_addr, interp_load_addr);
-
-	sp = (elf_addr_t *) (~15UL & (unsigned long) p);
-	csp = sp;
-	csp -= exec ? DLINFO_ITEMS*2 : 2;
-	csp -= envc+1;
-	csp -= argc+1;
-	csp -= 1;		/* argc itself */
-	if ((unsigned long)csp & 15UL) {
-		sp -= (16UL - ((unsigned long)csp & 15UL)) / sizeof(*sp);
-	}
-
-	/*
-	 * Put the ELF interpreter info on the stack
-	 */
-#define NEW_AUX_ENT(nr, id, val) \
-	  __put_user((id), sp+(nr*2)); \
-	  __put_user((val), sp+(nr*2+1)); \
-
-	sp -= 2;
-	NEW_AUX_ENT(0, AT_NULL, 0);
-
-	if (exec) {
-		sp -= 11*2;
-
-		NEW_AUX_ENT(0, AT_PHDR, load_addr + exec->e_phoff);
-		NEW_AUX_ENT(1, AT_PHENT, sizeof(struct elf_phdr));
-		NEW_AUX_ENT(2, AT_PHNUM, exec->e_phnum);
-		NEW_AUX_ENT(3, AT_PAGESZ, ELF_EXEC_PAGESIZE);
-		NEW_AUX_ENT(4, AT_BASE, interp_load_addr);
-		NEW_AUX_ENT(5, AT_FLAGS, 0);
-		NEW_AUX_ENT(6, AT_ENTRY, (elf_addr_t) exec->e_entry);
-		NEW_AUX_ENT(7, AT_UID, (elf_addr_t) current->uid);
-		NEW_AUX_ENT(8, AT_EUID, (elf_addr_t) current->euid);
-		NEW_AUX_ENT(9, AT_GID, (elf_addr_t) current->gid);
-		NEW_AUX_ENT(10, AT_EGID, (elf_addr_t) current->egid);
-	}
-#undef NEW_AUX_ENT
-
-	sp -= envc+1;
-	envp = sp;
-	sp -= argc+1;
-	argv = sp;
-
-	__put_user((elf_addr_t)argc, --sp);
-	current->mm->arg_start = (unsigned long) p;
-	while (argc-->0) {
-		__put_user((unsigned long)p, argv++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, argv);
-	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
-	while (envc-->0) {
-		__put_user((unsigned long)p, envp++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, envp);
-	current->mm->env_end = (unsigned long) p;
-	return sp;
-}
-
-
-/* This is much more generalized than the library routine read function,
- * so we keep this separate.  Technically the library read function
- * is only provided so that we can read a.out libraries that have
- * an ELF header.
- */
-static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
-				     struct file * interpreter,
-				     unsigned int *interp_load_addr)
-{
-	struct elf_phdr *elf_phdata  =  NULL;
-	struct elf_phdr *eppnt;
-	unsigned int len;
-	unsigned int load_addr;
-	int elf_bss;
-	int retval;
-	unsigned int last_bss;
-	int error;
-	int i;
-	unsigned int k;
-
-	elf_bss = 0;
-	last_bss = 0;
-	error = load_addr = 0;
-
-	print_elfhdr(interp_elf_ex);
-
-	/* First of all, some simple consistency checks */
-	if ((interp_elf_ex->e_type != ET_EXEC &&
-	     interp_elf_ex->e_type != ET_DYN) ||
-	     !interpreter->f_op->mmap) {
-		printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
-		return 0xffffffff;
-	}
-
-	/* Now read in all of the header information */
-	if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) {
-	    printk("IRIX interp header bigger than a page (%d)\n",
-		   (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum));
-	    return 0xffffffff;
-	}
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum,
-			     GFP_KERNEL);
-
-	if (!elf_phdata) {
-		printk("Cannot kmalloc phdata for IRIX interp.\n");
-		return 0xffffffff;
-	}
-
-	/* If the size of this structure has changed, then punt, since
-	 * we will be doing the wrong thing.
-	 */
-	if (interp_elf_ex->e_phentsize != 32) {
-		printk("IRIX interp e_phentsize == %d != 32 ",
-		       interp_elf_ex->e_phentsize);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	retval = kernel_read(interpreter, interp_elf_ex->e_phoff,
-			   (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-
-	dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
-
-	eppnt = elf_phdata;
-	for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
-		if (eppnt->p_type == PT_LOAD) {
-			int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
-			int elf_prot = 0;
-			unsigned long vaddr = 0;
-			if (eppnt->p_flags & PF_R)
-				elf_prot =  PROT_READ;
-			if (eppnt->p_flags & PF_W)
-				elf_prot |= PROT_WRITE;
-			if (eppnt->p_flags & PF_X)
-				elf_prot |= PROT_EXEC;
-			elf_type |= MAP_FIXED;
-			vaddr = eppnt->p_vaddr;
-
-			pr_debug("INTERP do_mmap"
-			         "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
-			         interpreter, vaddr,
-			         (unsigned long)
-			         (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
-			         (unsigned long)
-			         elf_prot, (unsigned long) elf_type,
-			         (unsigned long)
-			         (eppnt->p_offset & 0xfffff000));
-
-			down_write(&current->mm->mmap_sem);
-			error = do_mmap(interpreter, vaddr,
-			eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
-			elf_prot, elf_type,
-			eppnt->p_offset & 0xfffff000);
-			up_write(&current->mm->mmap_sem);
-
-			if (error < 0 && error > -1024) {
-				printk("Aieee IRIX interp mmap error=%d\n",
-				       error);
-				break;  /* Real error */
-			}
-			pr_debug("error=%08lx ", (unsigned long) error);
-			if (!load_addr && interp_elf_ex->e_type == ET_DYN) {
-				load_addr = error;
-				pr_debug("load_addr = error ");
-			}
-
-			/*
-			 * Find the end of the file  mapping for this phdr, and
-			 * keep track of the largest address we see for this.
-			 */
-			k = eppnt->p_vaddr + eppnt->p_filesz;
-			if (k > elf_bss)
-				elf_bss = k;
-
-			/* Do the same thing for the memory mapping - between
-			 * elf_bss and last_bss is the bss section.
-			 */
-			k = eppnt->p_memsz + eppnt->p_vaddr;
-			if (k > last_bss)
-				last_bss = k;
-			pr_debug("\n");
-		}
-	}
-
-	/* Now use mmap to map the library into memory. */
-	if (error < 0 && error > -1024) {
-		pr_debug("got error %d\n", error);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	/* Now fill out the bss section.  First pad the last page up
-	 * to the page boundary, and then perform a mmap to make sure
-	 * that there are zero-mapped pages up to and including the
-	 * last bss page.
-	 */
-	pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
-	padzero(elf_bss);
-	len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
-
-	pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
-	         (unsigned long) len);
-
-	/* Map the last of the bss segment */
-	if (last_bss > len) {
-		down_write(&current->mm->mmap_sem);
-		do_brk(len, (last_bss - len));
-		up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-
-	*interp_load_addr = load_addr;
-	return ((unsigned int) interp_elf_ex->e_entry);
-}
-
-/* Check sanity of IRIX elf executable header. */
-static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
-{
-	if (memcmp(ehp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks */
-	if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
-	    !bprm->file->f_op->mmap) {
-		return -ENOEXEC;
-	}
-
-	/* XXX Don't support N32 or 64bit binaries yet because they can
-	 * XXX and do execute 64 bit instructions and expect all registers
-	 * XXX to be 64 bit as well.  We need to make the kernel save
-	 * XXX all registers as 64bits on cpu's capable of this at
-	 * XXX exception time plus frob the XTLB exception vector.
-	 */
-	if ((ehp->e_flags & EF_MIPS_ABI2))
-		return -ENOEXEC;
-
-	return 0;
-}
-
-/*
- * This is where the detailed check is performed. Irix binaries
- * use interpreters with 'libc.so' in the name, so this function
- * can differentiate between Linux and Irix binaries.
- */
-static inline int look_for_irix_interpreter(char **name,
-					    struct file **interpreter,
-					    struct elfhdr *interp_elf_ex,
-					    struct elf_phdr *epp,
-					    struct linux_binprm *bprm, int pnum)
-{
-	int i;
-	int retval = -EINVAL;
-	struct file *file = NULL;
-
-	*name = NULL;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* It is illegal to have two interpreters for one executable. */
-		if (*name != NULL)
-			goto out;
-
-		*name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
-		if (!*name)
-			return -ENOMEM;
-
-		strcpy(*name, IRIX_EMUL);
-		retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
-		                     epp->p_filesz);
-		if (retval < 0)
-			goto out;
-
-		file = open_exec(*name);
-		if (IS_ERR(file)) {
-			retval = PTR_ERR(file);
-			goto out;
-		}
-		retval = kernel_read(file, 0, bprm->buf, 128);
-		if (retval < 0)
-			goto dput_and_out;
-
-		*interp_elf_ex = *(struct elfhdr *) bprm->buf;
-	}
-	*interpreter = file;
-	return 0;
-
-dput_and_out:
-	fput(file);
-out:
-	kfree(*name);
-	return retval;
-}
-
-static inline int verify_irix_interpreter(struct elfhdr *ihp)
-{
-	if (memcmp(ihp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ELIBBAD;
-	return 0;
-}
-
-#define EXEC_MAP_FLAGS (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE)
-
-static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnum,
-				  unsigned int *estack, unsigned int *laddr,
-				  unsigned int *scode, unsigned int *ebss,
-				  unsigned int *ecode, unsigned int *edata,
-				  unsigned int *ebrk)
-{
-	unsigned int tmp;
-	int i, prot;
-
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_LOAD)
-			continue;
-
-		/* Map it. */
-		prot  = (epp->p_flags & PF_R) ? PROT_READ : 0;
-		prot |= (epp->p_flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (epp->p_flags & PF_X) ? PROT_EXEC : 0;
-	        down_write(&current->mm->mmap_sem);
-		(void) do_mmap(fp, (epp->p_vaddr & 0xfffff000),
-			       (epp->p_filesz + (epp->p_vaddr & 0xfff)),
-			       prot, EXEC_MAP_FLAGS,
-			       (epp->p_offset & 0xfffff000));
-	        up_write(&current->mm->mmap_sem);
-
-		/* Fixup location tracking vars. */
-		if ((epp->p_vaddr & 0xfffff000) < *estack)
-			*estack = (epp->p_vaddr & 0xfffff000);
-		if (!*laddr)
-			*laddr = epp->p_vaddr - epp->p_offset;
-		if (epp->p_vaddr < *scode)
-			*scode = epp->p_vaddr;
-
-		tmp = epp->p_vaddr + epp->p_filesz;
-		if (tmp > *ebss)
-			*ebss = tmp;
-		if ((epp->p_flags & PF_X) && *ecode < tmp)
-			*ecode = tmp;
-		if (*edata < tmp)
-			*edata = tmp;
-
-		tmp = epp->p_vaddr + epp->p_memsz;
-		if (tmp > *ebrk)
-			*ebrk = tmp;
-	}
-
-}
-
-static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
-				  struct file *interp, unsigned int *iladdr,
-				  int pnum, mm_segment_t old_fs,
-				  unsigned int *eentry)
-{
-	int i;
-
-	*eentry = 0xffffffff;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* We should have fielded this error elsewhere... */
-		if (*eentry != 0xffffffff)
-			return -1;
-
-		set_fs(old_fs);
-		*eentry = load_irix_interp(ihp, interp, iladdr);
-		old_fs = get_fs();
-		set_fs(get_ds());
-
-		fput(interp);
-
-		if (*eentry == 0xffffffff)
-			return -1;
-	}
-	return 0;
-}
-
-/*
- * IRIX maps a page at 0x200000 that holds information about the
- * process and the system, here we map the page and fill the
- * structure
- */
-static int irix_map_prda_page(void)
-{
-	unsigned long v;
-	struct prda *pp;
-
-	down_write(&current->mm->mmap_sem);
-	v =  do_brk(PRDA_ADDRESS, PAGE_SIZE);
-	up_write(&current->mm->mmap_sem);
-
-	if (v != PRDA_ADDRESS)
-		return v;		/* v must be an error code */
-
-	pp = (struct prda *) v;
-	pp->prda_sys.t_pid  = task_pid_vnr(current);
-	pp->prda_sys.t_prid = read_c0_prid();
-	pp->prda_sys.t_rpid = task_pid_vnr(current);
-
-	/* We leave the rest set to zero */
-
-	return 0;
-}
-
-
-
-/* These are the functions used to load ELF style executables and shared
- * libraries.  There is no binary dependent code anywhere else.
- */
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
-{
-	struct elfhdr elf_ex, interp_elf_ex;
-	struct file *interpreter;
-	struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr;
-	unsigned int load_addr, elf_bss, elf_brk;
-	unsigned int elf_entry, interp_load_addr = 0;
-	unsigned int start_code, end_code, end_data, elf_stack;
-	int retval, has_interp, has_ephdr, size, i;
-	char *elf_interpreter;
-	mm_segment_t old_fs;
-
-	load_addr = 0;
-	has_interp = has_ephdr = 0;
-	elf_ihdr = elf_ephdr = NULL;
-	elf_ex = *((struct elfhdr *) bprm->buf);
-	retval = -ENOEXEC;
-
-	if (verify_binary(&elf_ex, bprm))
-		goto out;
-
-	/*
-	 * Telling -o32 static binaries from Linux and Irix apart from each
-	 * other is difficult. There are 2 differences to be noted for static
-	 * binaries from the 2 operating systems:
-	 *
-	 *    1) Irix binaries have their .text section before their .init
-	 *       section. Linux binaries are just the opposite.
-	 *
-	 *    2) Irix binaries usually have <= 12 sections and Linux
-	 *       binaries have > 20.
-	 *
-	 * We will use Method #2 since Method #1 would require us to read in
-	 * the section headers which is way too much overhead. This appears
-	 * to work for everything we have ran into so far. If anyone has a
-	 * better method to tell the binaries apart, I'm listening.
-	 */
-	if (elf_ex.e_shnum > 20)
-		goto out;
-
-	print_elfhdr(&elf_ex);
-
-	/* Now read in all of the header information */
-	size = elf_ex.e_phentsize * elf_ex.e_phnum;
-	if (size > 65536)
-		goto out;
-	elf_phdata = kmalloc(size, GFP_KERNEL);
-	if (elf_phdata == NULL) {
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-	if (retval < 0)
-		goto out_free_ph;
-
-	dump_phdrs(elf_phdata, elf_ex.e_phnum);
-
-	/* Set some things for later. */
-	for (i = 0; i < elf_ex.e_phnum; i++) {
-		switch (elf_phdata[i].p_type) {
-		case PT_INTERP:
-			has_interp = 1;
-			elf_ihdr = &elf_phdata[i];
-			break;
-		case PT_PHDR:
-			has_ephdr = 1;
-			elf_ephdr = &elf_phdata[i];
-			break;
-		};
-	}
-
-	pr_debug("\n");
-
-	elf_bss = 0;
-	elf_brk = 0;
-
-	elf_stack = 0xffffffff;
-	elf_interpreter = NULL;
-	start_code = 0xffffffff;
-	end_code = 0;
-	end_data = 0;
-
-	/*
-	 * If we get a return value, we change the value to be ENOEXEC
-	 * so that we can exit gracefully and the main binary format
-	 * search loop in 'fs/exec.c' will move onto the next handler
-	 * which should be the normal ELF binary handler.
-	 */
-	retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
-					   &interp_elf_ex, elf_phdata, bprm,
-					   elf_ex.e_phnum);
-	if (retval) {
-		retval = -ENOEXEC;
-		goto out_free_file;
-	}
-
-	if (elf_interpreter) {
-		retval = verify_irix_interpreter(&interp_elf_ex);
-		if (retval)
-			goto out_free_interp;
-	}
-
-	/* OK, we are done with that, now set up the arg stuff,
-	 * and then start this sucker up.
-	 */
-	retval = -E2BIG;
-	if (!bprm->sh_bang && !bprm->p)
-		goto out_free_interp;
-
-	/* Flush all traces of the currently running executable */
-	retval = flush_old_exec(bprm);
-	if (retval)
-		goto out_free_dentry;
-
-	/* OK, This is the point of no return */
-	current->mm->end_data = 0;
-	current->mm->end_code = 0;
-	current->mm->mmap = NULL;
-	current->flags &= ~PF_FORKNOEXEC;
-	elf_entry = (unsigned int) elf_ex.e_entry;
-
-	/* Do this so that we can load the interpreter, if need be.  We will
-	 * change some of these later.
-	 */
-	setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	current->mm->start_stack = bprm->p;
-
-	/* At this point, we assume that the image should be loaded at
-	 * fixed address, not at a variable address.
-	 */
-	old_fs = get_fs();
-	set_fs(get_ds());
-
-	map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack,
-	               &load_addr, &start_code, &elf_bss, &end_code,
-	               &end_data, &elf_brk);
-
-	if (elf_interpreter) {
-		retval = map_interpreter(elf_phdata, &interp_elf_ex,
-					 interpreter, &interp_load_addr,
-					 elf_ex.e_phnum, old_fs, &elf_entry);
-		kfree(elf_interpreter);
-		if (retval) {
-			set_fs(old_fs);
-			printk("Unable to load IRIX ELF interpreter\n");
-			send_sig(SIGSEGV, current, 0);
-			retval = 0;
-			goto out_free_file;
-		}
-	}
-
-	set_fs(old_fs);
-
-	kfree(elf_phdata);
-	set_personality(PER_IRIX32);
-	set_binfmt(&irix_format);
-	compute_creds(bprm);
-	current->flags &= ~PF_FORKNOEXEC;
-	bprm->p = (unsigned long)
-	  create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc,
-			(elf_interpreter ? &elf_ex : NULL),
-			load_addr, interp_load_addr, regs, elf_ephdr);
-	current->mm->start_brk = current->mm->brk = elf_brk;
-	current->mm->end_code = end_code;
-	current->mm->start_code = start_code;
-	current->mm->end_data = end_data;
-	current->mm->start_stack = bprm->p;
-
-	/* Calling set_brk effectively mmaps the pages that we need for the
-	 * bss and break sections.
-	 */
-	set_brk(elf_bss, elf_brk);
-
-	/*
-	 * IRIX maps a page at 0x200000 which holds some system
-	 * information.  Programs depend on this.
-	 */
-	if (irix_map_prda_page())
-		goto out_free_dentry;
-
-	padzero(elf_bss);
-
-	pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
-	pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
-	pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
-	pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
-	pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
-	pr_debug("(brk) %lx\n" , (long) current->mm->brk);
-
-#if 0 /* XXX No fucking way dude... */
-	/* Why this, you ask???  Well SVr4 maps page 0 as read-only,
-	 * and some applications "depend" upon this behavior.
-	 * Since we do not have the power to recompile these, we
-	 * emulate the SVr4 behavior.  Sigh.
-	 */
-	down_write(&current->mm->mmap_sem);
-	(void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC,
-		       MAP_FIXED | MAP_PRIVATE, 0);
-	up_write(&current->mm->mmap_sem);
-#endif
-
-	start_thread(regs, elf_entry, bprm->p);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-	return 0;
-out:
-	return retval;
-
-out_free_dentry:
-	allow_write_access(interpreter);
-	fput(interpreter);
-out_free_interp:
-	kfree(elf_interpreter);
-out_free_file:
-out_free_ph:
-	kfree(elf_phdata);
-	goto out;
-}
-
-/* This is really simpleminded and specialized - we are loading an
- * a.out library that is given an ELF header.
- */
-static int load_irix_library(struct file *file)
-{
-	struct elfhdr elf_ex;
-	struct elf_phdr *elf_phdata  =  NULL;
-	unsigned int len = 0;
-	int elf_bss = 0;
-	int retval;
-	unsigned int bss;
-	int error;
-	int i, j, k;
-
-	error = kernel_read(file, 0, (char *) &elf_ex, sizeof(elf_ex));
-	if (error != sizeof(elf_ex))
-		return -ENOEXEC;
-
-	if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks. */
-	if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
-	   !file->f_op->mmap)
-		return -ENOEXEC;
-
-	/* Now read in all of the header information. */
-	if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE)
-		return -ENOEXEC;
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL);
-	if (elf_phdata == NULL)
-		return -ENOMEM;
-
-	retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * elf_ex.e_phnum);
-
-	j = 0;
-	for (i=0; i<elf_ex.e_phnum; i++)
-		if ((elf_phdata + i)->p_type == PT_LOAD) j++;
-
-	if (j != 1)  {
-		kfree(elf_phdata);
-		return -ENOEXEC;
-	}
-
-	while (elf_phdata->p_type != PT_LOAD) elf_phdata++;
-
-	/* Now use mmap to map the library into memory. */
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap(file,
-			elf_phdata->p_vaddr & 0xfffff000,
-			elf_phdata->p_filesz + (elf_phdata->p_vaddr & 0xfff),
-			PROT_READ | PROT_WRITE | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
-			elf_phdata->p_offset & 0xfffff000);
-	up_write(&current->mm->mmap_sem);
-
-	k = elf_phdata->p_vaddr + elf_phdata->p_filesz;
-	if (k > elf_bss) elf_bss = k;
-
-	if (error != (elf_phdata->p_vaddr & 0xfffff000)) {
-		kfree(elf_phdata);
-		return error;
-	}
-
-	padzero(elf_bss);
-
-	len = (elf_phdata->p_filesz + elf_phdata->p_vaddr+ 0xfff) & 0xfffff000;
-	bss = elf_phdata->p_memsz + elf_phdata->p_vaddr;
-	if (bss > len) {
-	  down_write(&current->mm->mmap_sem);
-	  do_brk(len, bss-len);
-	  up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-	return 0;
-}
-
-/* Called through irix_syssgi() to map an elf image given an FD,
- * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many
- * phdrs there are in the USER_PHDRP array.  We return the vaddr the
- * first phdr was successfully mapped to.
- */
-unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
-{
-	unsigned long type, vaddr, filesz, offset, flags;
-	struct elf_phdr __user *hp;
-	struct file *filp;
-	int i, retval;
-
-	pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
-	         fd, user_phdrp, cnt);
-
-	/* First get the verification out of the way. */
-	hp = user_phdrp;
-	if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-		pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
-
-		return -EFAULT;
-	}
-
-	dump_phdrs(user_phdrp, cnt);
-
-	for (i = 0; i < cnt; i++, hp++) {
-		if (__get_user(type, &hp->p_type))
-			return -EFAULT;
-		if (type != PT_LOAD) {
-			printk("irix_mapelf: One section is not PT_LOAD!\n");
-			return -ENOEXEC;
-		}
-	}
-
-	filp = fget(fd);
-	if (!filp)
-		return -EACCES;
-	if (!filp->f_op) {
-		printk("irix_mapelf: Bogon filp!\n");
-		fput(filp);
-		return -EACCES;
-	}
-
-	hp = user_phdrp;
-	for (i = 0; i < cnt; i++, hp++) {
-		int prot;
-
-		retval = __get_user(vaddr, &hp->p_vaddr);
-		retval |= __get_user(filesz, &hp->p_filesz);
-		retval |= __get_user(offset, &hp->p_offset);
-		retval |= __get_user(flags, &hp->p_flags);
-		if (retval)
-			return retval;
-
-		prot  = (flags & PF_R) ? PROT_READ : 0;
-		prot |= (flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (flags & PF_X) ? PROT_EXEC : 0;
-
-		down_write(&current->mm->mmap_sem);
-		retval = do_mmap(filp, (vaddr & 0xfffff000),
-				 (filesz + (vaddr & 0xfff)),
-				 prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
-				 (offset & 0xfffff000));
-		up_write(&current->mm->mmap_sem);
-
-		if (retval != (vaddr & 0xfffff000)) {
-			printk("irix_mapelf: do_mmap fails with %d!\n", retval);
-			fput(filp);
-			return retval;
-		}
-	}
-
-	pr_debug("irix_mapelf: Success, returning %08lx\n",
-		 (unsigned long) user_phdrp->p_vaddr);
-
-	fput(filp);
-
-	if (__get_user(vaddr, &user_phdrp->p_vaddr))
-		return -EFAULT;
-
-	return vaddr;
-}
-
-/*
- * ELF core dumper
- *
- * Modelled on fs/exec.c:aout_core_dump()
- * Jeremy Fitzhardinge <jeremy@sw.oz.au>
- */
-
-/* These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-static int dump_write(struct file *file, const void __user *addr, int nr)
-{
-	return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
-}
-
-static int dump_seek(struct file *file, off_t off)
-{
-	if (file->f_op->llseek) {
-		if (file->f_op->llseek(file, off, 0) != off)
-			return 0;
-	} else
-		file->f_pos = off;
-	return 1;
-}
-
-/* Decide whether a segment is worth dumping; default is yes to be
- * sure (missing info is worse than too much; etc).
- * Personally I'd include everything, and use the coredump limit...
- *
- * I think we should skip something. But I am not sure how. H.J.
- */
-static inline int maydump(struct vm_area_struct *vma)
-{
-	if (!(vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC)))
-		return 0;
-#if 1
-	if (vma->vm_flags & (VM_WRITE|VM_GROWSUP|VM_GROWSDOWN))
-		return 1;
-	if (vma->vm_flags & (VM_READ|VM_EXEC|VM_EXECUTABLE|VM_SHARED))
-		return 0;
-#endif
-	return 1;
-}
-
-/* An ELF note in memory. */
-struct memelfnote
-{
-	const char *name;
-	int type;
-	unsigned int datasz;
-	void *data;
-};
-
-static int notesize(struct memelfnote *en)
-{
-	int sz;
-
-	sz = sizeof(struct elf_note);
-	sz += roundup(strlen(en->name) + 1, 4);
-	sz += roundup(en->datasz, 4);
-
-	return sz;
-}
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-static int writenote(struct memelfnote *men, struct file *file)
-{
-	struct elf_note en;
-
-	en.n_namesz = strlen(men->name) + 1;
-	en.n_descsz = men->datasz;
-	en.n_type = men->type;
-
-	DUMP_WRITE(&en, sizeof(en));
-	DUMP_WRITE(men->name, en.n_namesz);
-	/* XXX - cast from long long to long to avoid need for libgcc.a */
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-	DUMP_WRITE(men->data, men->datasz);
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-
-	return 1;
-
-end_coredump:
-	return 0;
-}
-#undef DUMP_WRITE
-#undef DUMP_SEEK
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-/* Actual dumper.
- *
- * This is a two-pass process; first we find the offsets of the bits,
- * and then they are actually written out.  If we run out of core limit
- * we just truncate.
- */
-static int irix_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
-{
-	int has_dumped = 0;
-	mm_segment_t fs;
-	int segs;
-	int i;
-	size_t size;
-	struct vm_area_struct *vma;
-	struct elfhdr elf;
-	off_t offset = 0, dataoff;
-	int numnote = 3;
-	struct memelfnote notes[3];
-	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
-	elf_fpregset_t fpu;		/* NT_PRFPREG */
-	struct elf_prpsinfo psinfo;	/* NT_PRPSINFO */
-
-	/* Count what's needed to dump, up to the limit of coredump size. */
-	segs = 0;
-	size = 0;
-	for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
-		if (maydump(vma))
-		{
-			int sz = vma->vm_end-vma->vm_start;
-
-			if (size+sz >= limit)
-				break;
-			else
-				size += sz;
-		}
-
-		segs++;
-	}
-	pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size);
-
-	/* Set up header. */
-	memcpy(elf.e_ident, ELFMAG, SELFMAG);
-	elf.e_ident[EI_CLASS] = ELFCLASS32;
-	elf.e_ident[EI_DATA] = ELFDATA2LSB;
-	elf.e_ident[EI_VERSION] = EV_CURRENT;
-	elf.e_ident[EI_OSABI] = ELF_OSABI;
-	memset(elf.e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
-
-	elf.e_type = ET_CORE;
-	elf.e_machine = ELF_ARCH;
-	elf.e_version = EV_CURRENT;
-	elf.e_entry = 0;
-	elf.e_phoff = sizeof(elf);
-	elf.e_shoff = 0;
-	elf.e_flags = 0;
-	elf.e_ehsize = sizeof(elf);
-	elf.e_phentsize = sizeof(struct elf_phdr);
-	elf.e_phnum = segs+1;		/* Include notes. */
-	elf.e_shentsize = 0;
-	elf.e_shnum = 0;
-	elf.e_shstrndx = 0;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	has_dumped = 1;
-	current->flags |= PF_DUMPCORE;
-
-	DUMP_WRITE(&elf, sizeof(elf));
-	offset += sizeof(elf);				/* Elf header. */
-	offset += (segs+1) * sizeof(struct elf_phdr);	/* Program headers. */
-
-	/* Set up the notes in similar form to SVR4 core dumps made
-	 * with info from their /proc.
-	 */
-	memset(&psinfo, 0, sizeof(psinfo));
-	memset(&prstatus, 0, sizeof(prstatus));
-
-	notes[0].name = "CORE";
-	notes[0].type = NT_PRSTATUS;
-	notes[0].datasz = sizeof(prstatus);
-	notes[0].data = &prstatus;
-	prstatus.pr_info.si_signo = prstatus.pr_cursig = signr;
-	prstatus.pr_sigpend = current->pending.signal.sig[0];
-	prstatus.pr_sighold = current->blocked.sig[0];
-	psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current);
-	psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent);
-	psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current);
-	psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current);
-	if (thread_group_leader(current)) {
-		/*
-		 * This is the record for the group leader.  Add in the
-		 * cumulative times of previous dead threads.  This total
-		 * won't include the time of each live thread whose state
-		 * is included in the core dump.  The final total reported
-		 * to our parent process when it calls wait4 will include
-		 * those sums as well as the little bit more time it takes
-		 * this and each other thread to finish dying after the
-		 * core dump synchronization phase.
-		 */
-		jiffies_to_timeval(current->utime + current->signal->utime,
-		                   &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime + current->signal->stime,
-		                   &prstatus.pr_stime);
-	} else {
-		jiffies_to_timeval(current->utime, &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime, &prstatus.pr_stime);
-	}
-	jiffies_to_timeval(current->signal->cutime, &prstatus.pr_cutime);
-	jiffies_to_timeval(current->signal->cstime, &prstatus.pr_cstime);
-
-	if (sizeof(elf_gregset_t) != sizeof(struct pt_regs)) {
-		printk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) "
-		       "(%d)\n", sizeof(elf_gregset_t), sizeof(struct pt_regs));
-	} else {
-		*(struct pt_regs *)&prstatus.pr_reg = *regs;
-	}
-
-	notes[1].name = "CORE";
-	notes[1].type = NT_PRPSINFO;
-	notes[1].datasz = sizeof(psinfo);
-	notes[1].data = &psinfo;
-	i = current->state ? ffz(~current->state) + 1 : 0;
-	psinfo.pr_state = i;
-	psinfo.pr_sname = (i < 0 || i > 5) ? '.' : "RSDZTD"[i];
-	psinfo.pr_zomb = psinfo.pr_sname == 'Z';
-	psinfo.pr_nice = task_nice(current);
-	psinfo.pr_flag = current->flags;
-	psinfo.pr_uid = current->uid;
-	psinfo.pr_gid = current->gid;
-	{
-		int i, len;
-
-		set_fs(fs);
-
-		len = current->mm->arg_end - current->mm->arg_start;
-		len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
-		(void *) copy_from_user(&psinfo.pr_psargs,
-			       (const char __user *)current->mm->arg_start, len);
-		for (i = 0; i < len; i++)
-			if (psinfo.pr_psargs[i] == 0)
-				psinfo.pr_psargs[i] = ' ';
-		psinfo.pr_psargs[len] = 0;
-
-		set_fs(KERNEL_DS);
-	}
-	strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
-
-	/* Try to dump the FPU. */
-	prstatus.pr_fpvalid = dump_fpu(regs, &fpu);
-	if (!prstatus.pr_fpvalid) {
-		numnote--;
-	} else {
-		notes[2].name = "CORE";
-		notes[2].type = NT_PRFPREG;
-		notes[2].datasz = sizeof(fpu);
-		notes[2].data = &fpu;
-	}
-
-	/* Write notes phdr entry. */
-	{
-		struct elf_phdr phdr;
-		int sz = 0;
-
-		for (i = 0; i < numnote; i++)
-			sz += notesize(&notes[i]);
-
-		phdr.p_type = PT_NOTE;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = 0;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = sz;
-		phdr.p_memsz = 0;
-		phdr.p_flags = 0;
-		phdr.p_align = 0;
-
-		offset += phdr.p_filesz;
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	/* Page-align dumped data. */
-	dataoff = offset = roundup(offset, PAGE_SIZE);
-
-	/* Write program headers for segments dump. */
-	for (vma = current->mm->mmap, i = 0;
-		i < segs && vma != NULL; vma = vma->vm_next) {
-		struct elf_phdr phdr;
-		size_t sz;
-
-		i++;
-
-		sz = vma->vm_end - vma->vm_start;
-
-		phdr.p_type = PT_LOAD;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = vma->vm_start;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = maydump(vma) ? sz : 0;
-		phdr.p_memsz = sz;
-		offset += phdr.p_filesz;
-		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
-		if (vma->vm_flags & VM_WRITE)
-			phdr.p_flags |= PF_W;
-		if (vma->vm_flags & VM_EXEC)
-			phdr.p_flags |= PF_X;
-		phdr.p_align = PAGE_SIZE;
-
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	for (i = 0; i < numnote; i++)
-		if (!writenote(&notes[i], file))
-			goto end_coredump;
-
-	set_fs(fs);
-
-	DUMP_SEEK(dataoff);
-
-	for (i = 0, vma = current->mm->mmap;
-	    i < segs && vma != NULL;
-	    vma = vma->vm_next) {
-		unsigned long addr = vma->vm_start;
-		unsigned long len = vma->vm_end - vma->vm_start;
-
-		if (!maydump(vma))
-			continue;
-		i++;
-		pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len);
-		DUMP_WRITE((void __user *)addr, len);
-	}
-
-	if ((off_t) file->f_pos != offset) {
-		/* Sanity check. */
-		printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n",
-		       (off_t) file->f_pos, offset);
-	}
-
-end_coredump:
-	set_fs(fs);
-	return has_dumped;
-}
-
-static int __init init_irix_binfmt(void)
-{
-	extern int init_inventory(void);
-	extern asmlinkage unsigned long sys_call_table;
-	extern asmlinkage unsigned long sys_call_table_irix5;
-
-	init_inventory();
-
-	/*
-	 * Copy the IRIX5 syscall table (8000 bytes) into the main syscall
-	 * table. The IRIX5 calls are located by an offset of 8000 bytes
-	 * from the beginning of the main table.
-	 */
-	memcpy((void *) ((unsigned long) &sys_call_table + 8000),
-		&sys_call_table_irix5, 8000);
-
-	return register_binfmt(&irix_format);
-}
-
-static void __exit exit_irix_binfmt(void)
-{
-	/*
-	 * Remove the Irix ELF loader.
-	 */
-	unregister_binfmt(&irix_format);
-}
-
-module_init(init_irix_binfmt)
-module_exit(exit_irix_binfmt)
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
deleted file mode 100644
index cf2dcd3d6a93..000000000000
--- a/arch/mips/kernel/irixinv.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Support the inventory interface for IRIX binaries
- * This is invoked before the mm layer is working, so we do not
- * use the linked lists for the inventory yet.
- *
- * Miguel de Icaza, 1997.
- */
-#include <linux/mm.h>
-#include <asm/inventory.h>
-#include <asm/uaccess.h>
-
-#define MAX_INVENTORY 50
-int inventory_items = 0;
-
-static inventory_t inventory [MAX_INVENTORY];
-
-void add_to_inventory(int class, int type, int controller, int unit, int state)
-{
-	inventory_t *ni = &inventory [inventory_items];
-
-	if (inventory_items == MAX_INVENTORY)
-		return;
-
-	ni->inv_class      = class;
-	ni->inv_type       = type;
-	ni->inv_controller = controller;
-	ni->inv_unit       = unit;
-	ni->inv_state      = state;
-	ni->inv_next       = ni;
-	inventory_items++;
-}
-
-int dump_inventory_to_user(void __user *userbuf, int size)
-{
-	inventory_t *inv  = &inventory [0];
-	inventory_t __user *user = userbuf;
-	int v;
-
-	if (!access_ok(VERIFY_WRITE, userbuf, size))
-		return -EFAULT;
-
-	for (v = 0; v < inventory_items; v++){
-		inv = &inventory [v];
-		if (copy_to_user (user, inv, sizeof (inventory_t)))
-			return -EFAULT;
-		user++;
-	}
-	return inventory_items * sizeof(inventory_t);
-}
-
-int __init init_inventory(void)
-{
-	/*
-	 * gross hack while we put the right bits all over the kernel
-	 * most likely this will not let just anyone run the X server
-	 * until we put the right values all over the place
-	 */
-	add_to_inventory(10, 3, 0, 0, 16400);
-	add_to_inventory(1, 1, 150, -1, 12);
-	add_to_inventory(1, 3, 0, 0, 8976);
-	add_to_inventory(1, 2, 0, 0, 8976);
-	add_to_inventory(4, 8, 0, 0, 2);
-	add_to_inventory(5, 5, 0, 0, 1);
-	add_to_inventory(3, 3, 0, 0, 32768);
-	add_to_inventory(3, 4, 0, 0, 32768);
-	add_to_inventory(3, 8, 0, 0, 524288);
-	add_to_inventory(3, 9, 0, 0, 64);
-	add_to_inventory(3, 1, 0, 0, 67108864);
-	add_to_inventory(12, 3, 0, 0, 16);
-	add_to_inventory(8, 7, 17, 0, 16777472);
-	add_to_inventory(8, 0, 0, 0, 1);
-	add_to_inventory(2, 1, 0, 13, 2);
-	add_to_inventory(2, 2, 0, 2, 0);
-	add_to_inventory(2, 2, 0, 1, 0);
-	add_to_inventory(7, 14, 0, 0, 6);
-
-	return 0;
-}
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
deleted file mode 100644
index b39bdba82e02..000000000000
--- a/arch/mips/kernel/irixioctl.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * irixioctl.c: A fucking mess...
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sockios.h>
-#include <linux/syscalls.h>
-#include <linux/tty.h>
-#include <linux/file.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/ioctl.h>
-#include <asm/ioctls.h>
-
-#undef DEBUG_IOCTLS
-#undef DEBUG_MISSING_IOCTL
-
-struct irix_termios {
-	tcflag_t c_iflag, c_oflag, c_cflag, c_lflag;
-	cc_t c_cc[NCCS];
-};
-
-asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
-{
-	struct tty_struct *tp, *rtp;
-	mm_segment_t old_fs;
-	int i, error = 0;
-
-#ifdef DEBUG_IOCTLS
-	printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
-#endif
-	switch(cmd) {
-	case 0x00005401:
-#ifdef DEBUG_IOCTLS
-		printk("TCGETA, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCGETA, arg);
-		break;
-
-	case 0x0000540d: {
-		struct termios kt;
-		struct irix_termios __user *it =
-			(struct irix_termios __user *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCGETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __put_user(kt.c_iflag, &it->c_iflag);
-		error |= __put_user(kt.c_oflag, &it->c_oflag);
-		error |= __put_user(kt.c_cflag, &it->c_cflag);
-		error |= __put_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
-		break;
-	}
-
-	case 0x0000540e: {
-		struct termios kt;
-		struct irix_termios *it = (struct irix_termios *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCSETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_READ, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __get_user(kt.c_iflag, &it->c_iflag);
-		error |= __get_user(kt.c_oflag, &it->c_oflag);
-		error |= __get_user(kt.c_cflag, &it->c_cflag);
-		error |= __get_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
-
-		if (error)
-			break;
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		break;
-	}
-
-	case 0x0000540f:
-#ifdef DEBUG_IOCTLS
-		printk("TCSETSW, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCSETSW, arg);
-		break;
-
-	case 0x00005471:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCNOTTY, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCNOTTY, arg);
-		break;
-
-	case 0x00007416: {
-		pid_t pid;
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGSID, %08lx) ", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid);
-		set_fs(old_fs);
-		if (!error)
-			error = put_user(pid, (unsigned long __user *) arg);
-		break;
-	}
-	case 0x746e:
-		/* TIOCSTART, same effect as hitting ^Q */
-#ifdef DEBUG_IOCTLS
-		printk("TIOCSTART, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCXONC, TCOON);
-		break;
-
-	case 0x20006968:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGETLABEL, %08lx) ", arg);
-#endif
-		error = -ENOPKG;
-		break;
-
-	case 0x40047477:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGPGRP, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGPGRP, arg);
-#ifdef DEBUG_IOCTLS
-		printk("arg=%d ", *(int *)arg);
-#endif
-		break;
-
-	case 0x40087468:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGWINSZ, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGWINSZ, arg);
-		break;
-
-	case 0x8004667e:
-		error = sys_ioctl(fd, FIONBIO, arg);
-		break;
-
-	case 0x80047476:
-		error = sys_ioctl(fd, TIOCSPGRP, arg);
-		break;
-
-	case 0x8020690c:
-		error = sys_ioctl(fd, SIOCSIFADDR, arg);
-		break;
-
-	case 0x80206910:
-		error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
-		break;
-
-	case 0xc0206911:
-		error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
-		break;
-
-	case 0xc020691b:
-		error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
-		break;
-
-	default: {
-#ifdef DEBUG_MISSING_IOCTL
-		char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
-
-#ifdef DEBUG_IOCTLS
-		printk("UNIMP_IOCTL, %08lx)\n", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		sys_write(2, msg, strlen(msg));
-		set_fs(old_fs);
-		printk("[%s:%d] Does unimplemented IRIX ioctl cmd %08lx\n",
-		       current->comm, current->pid, cmd);
-		do_exit(255);
-#else
-		error = sys_ioctl(fd, cmd, arg);
-#endif
-	}
-
-	};
-#ifdef DEBUG_IOCTLS
-	printk("error=%d\n", error);
-#endif
-	return error;
-}
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
deleted file mode 100644
index 0215c805a592..000000000000
--- a/arch/mips/kernel/irixsig.c
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * irixsig.c: WHEEE, IRIX signals!  YOW, am I compatible or what?!?!
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997 - 2000 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000 Silicon Graphics, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/ptrace.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-#undef DEBUG_SIG
-
-#define _S(nr) (1<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-#define _IRIX_NSIG		128
-#define _IRIX_NSIG_BPW		BITS_PER_LONG
-#define _IRIX_NSIG_WORDS	(_IRIX_NSIG / _IRIX_NSIG_BPW)
-
-typedef struct {
-	unsigned long sig[_IRIX_NSIG_WORDS];
-} irix_sigset_t;
-
-struct sigctx_irix5 {
-	u32 rmask, cp0_status;
-	u64 pc;
-	u64 regs[32];
-	u64 fpregs[32];
-	u32 usedfp, fpcsr, fpeir, sstk_flags;
-	u64 hi, lo;
-	u64 cp0_cause, cp0_badvaddr, _unused0;
-	irix_sigset_t sigset;
-	u64 weird_fpu_thing;
-	u64 _unused1[31];
-};
-
-#ifdef DEBUG_SIG
-/* Debugging */
-static inline void dump_irix5_sigctx(struct sigctx_irix5 *c)
-{
-	int i;
-
-	printk("misc: rmask[%08lx] status[%08lx] pc[%08lx]\n",
-	       (unsigned long) c->rmask,
-	       (unsigned long) c->cp0_status,
-	       (unsigned long) c->pc);
-	printk("regs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nfpregs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("\nfpregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("misc: usedfp[%d] fpcsr[%08lx] fpeir[%08lx] stk_flgs[%08lx]\n",
-	       (int) c->usedfp, (unsigned long) c->fpcsr,
-	       (unsigned long) c->fpeir, (unsigned long) c->sstk_flags);
-	printk("misc: hi[%08lx] lo[%08lx] cause[%08lx] badvaddr[%08lx]\n",
-	       (unsigned long) c->hi, (unsigned long) c->lo,
-	       (unsigned long) c->cp0_cause, (unsigned long) c->cp0_badvaddr);
-	printk("misc: sigset<0>[%08lx] sigset<1>[%08lx] sigset<2>[%08lx] "
-	       "sigset<3>[%08lx]\n", (unsigned long) c->sigset.sig[0],
-	       (unsigned long) c->sigset.sig[1],
-	       (unsigned long) c->sigset.sig[2],
-	       (unsigned long) c->sigset.sig[3]);
-}
-#endif
-
-static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			    int signr, sigset_t *oldmask)
-{
-	struct sigctx_irix5 __user *ctx;
-	unsigned long sp;
-	int error, i;
-
-	sp = regs->regs[29];
-	sp -= sizeof(struct sigctx_irix5);
-	sp &= ~(0xf);
-	ctx = (struct sigctx_irix5 __user *) sp;
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	error = __put_user(0, &ctx->weird_fpu_thing);
-	error |= __put_user(~(0x00000001), &ctx->rmask);
-	error |= __put_user(0, &ctx->regs[0]);
-	for(i = 1; i < 32; i++)
-		error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
-
-	error |= __put_user((u64) regs->hi, &ctx->hi);
-	error |= __put_user((u64) regs->lo, &ctx->lo);
-	error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
-	error |= __put_user(!!used_math(), &ctx->usedfp);
-	error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
-	error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
-
-	error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
-
-	error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	if (error)
-		goto segv_and_exit;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(ctx);
-#endif
-
-	regs->regs[4] = (unsigned long) signr;
-	regs->regs[5] = 0; /* XXX sigcode XXX */
-	regs->regs[6] = regs->regs[29] = sp;
-	regs->regs[7] = (unsigned long) ka->sa.sa_handler;
-	regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
-
-	return 1;
-
-segv_and_exit:
-	force_sigsegv(signr, current);
-	return 0;
-}
-
-static int inline
-setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
-               int signr, sigset_t *oldmask, siginfo_t *info)
-{
-	printk("Aiee: setup_tr_frame wants to be written");
-	do_exit(SIGSEGV);
-}
-
-static inline int handle_signal(unsigned long sig, siginfo_t *info,
-	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
-{
-	int ret;
-
-	switch(regs->regs[0]) {
-	case ERESTARTNOHAND:
-		regs->regs[2] = EINTR;
-		break;
-	case ERESTARTSYS:
-		if(!(ka->sa.sa_flags & SA_RESTART)) {
-			regs->regs[2] = EINTR;
-			break;
-		}
-	/* fallthrough */
-	case ERESTARTNOINTR:		/* Userland will reload $v0.  */
-		regs->cp0_epc -= 8;
-	}
-
-	regs->regs[0] = 0;		/* Don't deal with this again.  */
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
-	else
-		ret = setup_irix_frame(ka, regs, sig, oldset);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	return ret;
-}
-
-void do_irix_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/* a signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-
-		return;
-	}
-
-	/*
-	 * Who's code doesn't conform to the restartable syscall convention
-	 * dies here!!!  The li instruction, a single machine instruction,
-	 * must directly be followed by the syscall instruction.
-	 */
-	if (regs->regs[0]) {
-		if (regs->regs[2] == ERESTARTNOHAND ||
-		    regs->regs[2] == ERESTARTSYS ||
-		    regs->regs[2] == ERESTARTNOINTR) {
-			regs->cp0_epc -= 8;
-		}
-		if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
-			regs->regs[2] = __NR_restart_syscall;
-			regs->regs[7] = regs->regs[26];
-			regs->cp0_epc -= 4;
-		}
-		regs->regs[0] = 0;	/* Don't deal with this again.  */
-	}
-
-	/*
-	* If there's no signal to deliver, we just put the saved sigmask
-	* back
-	*/
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
-
-asmlinkage void
-irix_sigreturn(struct pt_regs *regs)
-{
-	struct sigctx_irix5 __user *context, *magic;
-	unsigned long umask, mask;
-	u64 *fregs;
-	u32 usedfp;
-	int error, sig, i, base = 0;
-	sigset_t blocked;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
-	magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
-	sig = (int) regs->regs[base + 6];
-#ifdef DEBUG_SIG
-	printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
-	       current->comm, current->pid, context, magic, sig);
-#endif
-	if (!context)
-		context = magic;
-	if (!access_ok(VERIFY_READ, context, sizeof(struct sigctx_irix5)))
-		goto badframe;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(context);
-#endif
-
-	error = __get_user(regs->cp0_epc, &context->pc);
-	error |= __get_user(umask, &context->rmask);
-
-	mask = 2;
-	for (i = 1; i < 32; i++, mask <<= 1) {
-		if (umask & mask)
-			error |= __get_user(regs->regs[i], &context->regs[i]);
-	}
-	error |= __get_user(regs->hi, &context->hi);
-	error |= __get_user(regs->lo, &context->lo);
-
-	error |= __get_user(usedfp, &context->usedfp);
-	if ((umask & 1) && usedfp) {
-		fregs = (u64 *) &current->thread.fpu;
-
-		for(i = 0; i < 32; i++)
-			error |= __get_user(fregs[i], &context->fpregs[i]);
-		error |= __get_user(current->thread.fpu.fcr31, &context->fpcsr);
-	}
-
-	/* XXX do sigstack crapola here... XXX */
-
-	error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
-
-	if (error)
-		goto badframe;
-
-	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-badframe:
-	force_sig(SIGSEGV, current);
-}
-
-struct sigact_irix5 {
-	int flags;
-	void (*handler)(int);
-	u32 sigset[4];
-	int _unused0[2];
-};
-
-#define SIG_SETMASK32	256	/* Goodie from SGI for BSD compatibility:
-				   set only the low 32 bit of the sigset.  */
-
-#ifdef DEBUG_SIG
-static inline void dump_sigact_irix5(struct sigact_irix5 *p)
-{
-	printk("<f[%d] hndlr[%08lx] msk[%08lx]>", p->flags,
-	       (unsigned long) p->handler,
-	       (unsigned long) p->sigset[0]);
-}
-#endif
-
-asmlinkage int
-irix_sigaction(int sig, const struct sigaction __user *act,
-	      struct sigaction __user *oact, void __user *trampoline)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-#ifdef DEBUG_SIG
-	printk(" (%d,%s,%s,%08lx) ", sig, (!new ? "0" : "NEW"),
-	       (!old ? "0" : "OLD"), trampoline);
-	if(new) {
-		dump_sigact_irix5(new); printk(" ");
-	}
-#endif
-	if (act) {
-		sigset_t mask;
-		int err;
-
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
-			return -EFAULT;
-		err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
-		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-
-		err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return err;
-
-		/*
-		 * Hmmm... methinks IRIX libc always passes a valid trampoline
-		 * value for all invocations of sigaction.  Will have to
-		 * investigate.  POSIX POSIX, die die die...
-		 */
-		new_ka.sa_restorer = trampoline;
-	}
-
-/* XXX Implement SIG_SETMASK32 for IRIX compatibility */
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		int err;
-
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
-			return -EFAULT;
-
-		err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
-		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
-		               sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-asmlinkage int irix_sigpending(irix_sigset_t __user *set)
-{
-	return do_sigpending(set, sizeof(*set));
-}
-
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
-	irix_sigset_t __user *old)
-{
-	sigset_t oldbits, newbits;
-
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-		if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
-			return -EFAULT;
-		sigdelsetmask(&newbits, ~_BLOCKABLE);
-
-		spin_lock_irq(&current->sighand->siglock);
-		oldbits = current->blocked;
-
-		switch(how) {
-		case 1:
-			sigorsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 2:
-			sigandsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 3:
-			break;
-
-		case 256:
-			siginitset(&newbits, newbits.sig[0]);
-			break;
-
-		default:
-			spin_unlock_irq(&current->sighand->siglock);
-			return -EINVAL;
-		}
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-	if (old)
-		return copy_to_user(old, &current->blocked,
-		                  sizeof(unsigned long)*4) ? -EFAULT : 0;
-
-	return 0;
-}
-
-asmlinkage int irix_sigsuspend(struct pt_regs *regs)
-{
-	sigset_t newset;
-	sigset_t __user *uset;
-
-	uset = (sigset_t __user *) regs->regs[4];
-	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-/* hate hate hate... */
-struct irix5_siginfo {
-	int sig, code, error;
-	union {
-		char unused[128 - (3 * 4)]; /* Safety net. */
-		struct {
-			int pid;
-			union {
-				int uid;
-				struct {
-					int utime, status, stime;
-				} child;
-			} procdata;
-		} procinfo;
-
-		unsigned long fault_addr;
-
-		struct {
-			int fd;
-			long band;
-		} fileinfo;
-
-		unsigned long sigval;
-	} stuff;
-};
-
-asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
-	struct irix5_siginfo __user *info, struct timespec __user *tp)
-{
-	long expire = MAX_SCHEDULE_TIMEOUT;
-	sigset_t kset;
-	int i, sig, error, timeo = 0;
-	struct timespec ktp;
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
-	       current->comm, current->pid, set, info, tp);
-#endif
-
-	/* Must always specify the signal set. */
-	if (!set)
-		return -EINVAL;
-
-	if (copy_from_user(&kset, set, sizeof(set)))
-		return -EFAULT;
-
-	if (info && clear_user(info, sizeof(*info))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (tp) {
-		if (copy_from_user(&ktp, tp, sizeof(*tp)))
-			return -EFAULT;
-
-		if (!ktp.tv_sec && !ktp.tv_nsec)
-			return -EINVAL;
-
-		expire = timespec_to_jiffies(&ktp) +
-		         (ktp.tv_sec || ktp.tv_nsec);
-	}
-
-	while(1) {
-		long tmp = 0;
-
-		expire = schedule_timeout_interruptible(expire);
-
-		for (i=0; i < _IRIX_NSIG_WORDS; i++)
-			tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
-
-		if (tmp)
-			break;
-		if (!expire) {
-			timeo = 1;
-			break;
-		}
-		if (signal_pending(current))
-			return -EINTR;
-	}
-	if (timeo)
-		return -EAGAIN;
-
-	for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
-		if (sigismember (&kset, sig))
-			continue;
-		if (sigismember (&current->pending.signal, sig)) {
-			/* XXX need more than this... */
-			if (info)
-				return copy_to_user(&info->sig, &sig, sizeof(sig));
-			return 0;
-		}
-	}
-
-	/* Should not get here, but do something sane if we do. */
-	error = -EINTR;
-
-out:
-	return error;
-}
-
-/* This is here because of irix5_siginfo definition. */
-#define IRIX_P_PID    0
-#define IRIX_P_PGID   2
-#define IRIX_P_ALL    7
-
-#define W_EXITED     1
-#define W_TRAPPED    2
-#define W_STOPPED    4
-#define W_CONT       8
-#define W_NOHANG    64
-
-#define W_MASK      (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-
-asmlinkage int irix_waitsys(int type, int upid,
-	struct irix5_siginfo __user *info, int options,
-	struct rusage __user *ru)
-{
-	struct pid *pid = NULL;
-	int flag, retval;
-	DECLARE_WAITQUEUE(wait, current);
-	struct task_struct *tsk;
-	struct task_struct *p;
-	struct list_head *_p;
-
-	if (!info)
-		return -EINVAL;
-
-	if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
-		return -EFAULT;
-
-	if (ru)
-		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
-			return -EFAULT;
-
-	if (options & ~W_MASK)
-		return -EINVAL;
-
-	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
-		return -EINVAL;
-
-	if (type != IRIX_P_ALL)
-		pid = find_get_pid(upid);
-	add_wait_queue(&current->signal->wait_chldexit, &wait);
-repeat:
-	flag = 0;
-	current->state = TASK_INTERRUPTIBLE;
-	read_lock(&tasklist_lock);
-	tsk = current;
-	list_for_each(_p, &tsk->children) {
-		p = list_entry(_p, struct task_struct, sibling);
-		if ((type == IRIX_P_PID) && task_pid(p) != pid)
-			continue;
-		if ((type == IRIX_P_PGID) && task_pgrp(p) != pid)
-			continue;
-		if ((p->exit_signal != SIGCHLD))
-			continue;
-		flag = 1;
-		switch (p->state) {
-		case TASK_STOPPED:
-			if (!p->exit_code)
-				continue;
-			if (!(options & (W_TRAPPED|W_STOPPED)) &&
-			    !(p->ptrace & PT_PTRACED))
-				continue;
-			read_unlock(&tasklist_lock);
-
-			/* move to end of parent's list to avoid starvation */
-			write_lock_irq(&tasklist_lock);
-			remove_parent(p);
-			add_parent(p);
-			write_unlock_irq(&tasklist_lock);
-			retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-			if (retval)
-				goto end_waitsys;
-
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(0, &info->code);
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			p->exit_code = 0;
-			goto end_waitsys;
-
-		case EXIT_ZOMBIE:
-			current->signal->cutime += p->utime + p->signal->cutime;
-			current->signal->cstime += p->stime + p->signal->cstime;
-			if (ru != NULL)
-				getrusage(p, RUSAGE_BOTH, ru);
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(1, &info->code);      /* CLD_EXITED */
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime,
-			           &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime,
-			           &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			if (p->real_parent != p->parent) {
-				write_lock_irq(&tasklist_lock);
-				remove_parent(p);
-				p->parent = p->real_parent;
-				add_parent(p);
-				do_notify_parent(p, SIGCHLD);
-				write_unlock_irq(&tasklist_lock);
-			} else
-				release_task(p);
-			goto end_waitsys;
-		default:
-			continue;
-		}
-		tsk = next_thread(tsk);
-	}
-	read_unlock(&tasklist_lock);
-	if (flag) {
-		retval = 0;
-		if (options & W_NOHANG)
-			goto end_waitsys;
-		retval = -ERESTARTSYS;
-		if (signal_pending(current))
-			goto end_waitsys;
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		goto repeat;
-	}
-	retval = -ECHILD;
-end_waitsys:
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&current->signal->wait_chldexit, &wait);
-	put_pid(pid);
-
-	return retval;
-}
-
-struct irix5_context {
-	u32 flags;
-	u32 link;
-	u32 sigmask[4];
-	struct { u32 sp, size, flags; } stack;
-	int regs[36];
-	u32 fpregs[32];
-	u32 fpcsr;
-	u32 _unused0;
-	u32 _unused1[47];
-	u32 weird_graphics_thing;
-};
-
-asmlinkage int irix_getcontext(struct pt_regs *regs)
-{
-	int error, i, base = 0;
-	struct irix5_context __user *ctx;
-	unsigned long flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_getcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		return -EFAULT;
-
-	error = __put_user(current->thread.irix_oldctx, &ctx->link);
-
-	error |= __copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	/* XXX Do sigstack stuff someday... */
-	error |= __put_user(0, &ctx->stack.sp);
-	error |= __put_user(0, &ctx->stack.size);
-	error |= __put_user(0, &ctx->stack.flags);
-
-	error |= __put_user(0, &ctx->weird_graphics_thing);
-	error |= __put_user(0, &ctx->regs[0]);
-	for (i = 1; i < 32; i++)
-		error |= __put_user(regs->regs[i], &ctx->regs[i]);
-	error |= __put_user(regs->lo, &ctx->regs[32]);
-	error |= __put_user(regs->hi, &ctx->regs[33]);
-	error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
-	error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
-
-	flags = 0x0f;
-	if (!used_math()) {
-		flags &= ~(0x08);
-	} else {
-		/* XXX wheee... */
-		printk("Wheee, no code for saving IRIX FPU context yet.\n");
-	}
-	error |= __put_user(flags, &ctx->flags);
-
-	return error;
-}
-
-asmlinkage void irix_setcontext(struct pt_regs *regs)
-{
-	struct irix5_context __user *ctx;
-	int err, base = 0;
-	u32 flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_setcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	err = __get_user(flags, &ctx->flags);
-	if (flags & 0x02) {
-		/* XXX sigstack garbage, todo... */
-		printk("Wheee, cannot do sigstack stuff in setcontext\n");
-	}
-
-	if (flags & 0x04) {
-		int i;
-
-		/* XXX extra control block stuff... todo... */
-		for (i = 1; i < 32; i++)
-			err |= __get_user(regs->regs[i], &ctx->regs[i]);
-		err |= __get_user(regs->lo, &ctx->regs[32]);
-		err |= __get_user(regs->hi, &ctx->regs[33]);
-		err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
-	}
-
-	if (flags & 0x08)
-		/* XXX fpu context, blah... */
-		printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
-
-	err |= __get_user(current->thread.irix_oldctx, &ctx->link);
-	if (err)
-		goto segv_and_exit;
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-segv_and_exit:
-	force_sigsegv(SIGSEGV, current);
-}
-
-struct irix_sigstack {
-	unsigned long sp;
-	int status;
-};
-
-asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
-	struct irix_sigstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-	}
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_sigaltstack { unsigned long sp; int size; int status; };
-
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
-				struct irix_sigaltstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new)
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_procset {
-	int cmd, ltype, lid, rtype, rid;
-};
-
-asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
-{
-	if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
-		return -EFAULT;
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
-	       current->comm, current->pid,
-	       pset->cmd, pset->ltype, pset->lid, pset->rtype, pset->rid,
-	       sig);
-#endif
-	return -EINVAL;
-}
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index e3309ff9ece4..6045b9a51a35 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -44,8 +44,6 @@ again:
 	return irq;
 }
 
-EXPORT_SYMBOL_GPL(allocate_irqno);
-
 /*
  * Allocate the 16 legacy interrupts for i8259 devices.  This happens early
  * in the kernel initialization so treating allocation failure as BUG() is
@@ -66,8 +64,6 @@ void free_irqno(unsigned int irq)
 	smp_mb__after_clear_bit();
 }
 
-EXPORT_SYMBOL_GPL(free_irqno);
-
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
  * each architecture has to answer this themselves.
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 640fb0cc6e39..d01665a453f5 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -84,9 +83,9 @@ void mips_mt_regdump(unsigned long mvpctl)
 				       read_vpe_c0_vpeconf0());
 				printk("   VPE%d.Status : %08lx\n",
 				       i, read_vpe_c0_status());
-				printk("   VPE%d.EPC : %08lx ",
-				       i, read_vpe_c0_epc());
-				print_symbol("%s\n", read_vpe_c0_epc());
+				printk("   VPE%d.EPC : %08lx %pS\n",
+				       i, read_vpe_c0_epc(),
+				       (void *) read_vpe_c0_epc());
 				printk("   VPE%d.Cause : %08lx\n",
 				       i, read_vpe_c0_cause());
 				printk("   VPE%d.Config7 : %08lx\n",
@@ -111,8 +110,8 @@ void mips_mt_regdump(unsigned long mvpctl)
 		}
 		printk("   TCStatus : %08lx\n", tcstatval);
 		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
-		printk("   TCRestart : %08lx ", read_tc_c0_tcrestart());
-		print_symbol("%s\n", read_tc_c0_tcrestart());
+		printk("   TCRestart : %08lx %pS\n",
+		       read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart());
 		printk("   TCHalt : %08lx\n", haltval);
 		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
 		if (!haltval)
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 2c09a442e5e5..c06f5b5d764c 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -125,13 +125,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	*childregs = *regs;
 	childregs->regs[7] = 0;	/* Clear error flag */
 
-#if defined(CONFIG_BINFMT_IRIX)
-	if (current->personality != PER_LINUX) {
-		/* Under IRIX things are a little different. */
-		childregs->regs[3] = 1;
-		regs->regs[3] = 0;
-	}
-#endif
 	childregs->regs[2] = 0;	/* Child gets zero as return value */
 	regs->regs[2] = p->pid;
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 08a9c5070ea8..c058c0b61a2a 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -34,12 +34,8 @@ NESTED(handle_sys, PT_SIZE, sp)
 
 	lw	t1, PT_EPC(sp)		# skip syscall on return
 
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	t0, v0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	v0, v0, __NR_O32_Linux	# check syscall number
 	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
-#endif
 	addiu	t1, 4			# skip to next instruction
 	sw	t1, PT_EPC(sp)
 	beqz	t0, illegal_syscall
@@ -264,22 +260,14 @@ bad_alignment:
 	END(sys_sysmips)
 
 	LEAF(sys_syscall)
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	v0, a0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
-#endif
 	sll	t1, t0, 3
 	beqz	v0, einval
 
 	lw	t2, sys_call_table(t1)		# syscall routine
 
-#if defined(CONFIG_BINFMT_IRIX)
-	li	v1, 4000			# nr of sys_syscall
-#else
 	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
-#endif
 	beq	t0, v1, einval			# do not recurse
 
 	/* Some syscalls like execve get their arguments from struct pt_regs
@@ -324,13 +312,6 @@ einval:	li	v0, -EINVAL
 	.endm
 
 	.macro	syscalltable
-#if defined(CONFIG_BINFMT_IRIX)
-	mille	sys_ni_syscall		0	/*    0 -  999 SVR4 flavour */
-	mille	sys_ni_syscall		0	/* 1000 - 1999 32-bit IRIX */
-	mille	sys_ni_syscall		0	/* 2000 - 2999 BSD43 flavour */
-	mille	sys_ni_syscall		0	/* 3000 - 3999 POSIX flavour */
-#endif
-
 	sys	sys_syscall		8	/* 4000 */
 	sys	sys_exit		1
 	sys	sys_fork		0
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c6a063b2a0d9..8af84867e74d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -68,13 +68,6 @@ static char command_line[CL_SIZE];
 const unsigned long mips_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
-/*
- * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
- * for the processor.
- */
-unsigned long isa_slot_offset;
-EXPORT_SYMBOL(isa_slot_offset);
-
 static struct resource code_resource = { .name = "Kernel code", };
 static struct resource data_resource = { .name = "Kernel data", };
 
@@ -557,11 +550,7 @@ void __init setup_arch(char **cmdline_p)
 	prom_init();
 
 #ifdef CONFIG_EARLY_PRINTK
-	{
-		extern void setup_early_printk(void);
-
-		setup_early_printk();
-	}
+	setup_early_printk();
 #endif
 	cpu_report();
 	check_bugs_early();
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
deleted file mode 100644
index c357762b8012..000000000000
--- a/arch/mips/kernel/sysirix.c
+++ /dev/null
@@ -1,2140 +0,0 @@
-/*
- * sysirix.c: IRIX system call emulation.
- *
- * Copyright (C) 1996 David S. Miller
- * Copyright (C) 1997 Miguel de Icaza
- * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/binfmts.h>
-#include <linux/capability.h>
-#include <linux/highuid.h>
-#include <linux/pagemap.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/slab.h>
-#include <linux/swap.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/times.h>
-#include <linux/elf.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-#include <linux/vfs.h>
-#include <linux/namei.h>
-#include <linux/socket.h>
-#include <linux/security.h>
-#include <linux/syscalls.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-#include <asm/inventory.h>
-
-/* 2,191 lines of complete and utter shit coming up... */
-
-extern int max_threads;
-
-/* The sysmp commands supported thus far. */
-#define MP_NPROCS       	1 /* # processor in complex */
-#define MP_NAPROCS      	2 /* # active processors in complex */
-#define MP_PGSIZE           	14 /* Return system page size in v1. */
-
-asmlinkage int irix_sysmp(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int base = 0;
-	int error = 0;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case MP_PGSIZE:
-		error = PAGE_SIZE;
-		break;
-	case MP_NPROCS:
-	case MP_NAPROCS:
-		error = num_online_cpus();
-		break;
-	default:
-		printk("SYSMP[%s:%d]: Unsupported opcode %d\n",
-		       current->comm, current->pid, (int)cmd);
-		error = -EINVAL;
-		break;
-	}
-
-	return error;
-}
-
-/* The prctl commands. */
-#define PR_MAXPROCS		 1 /* Tasks/user. */
-#define PR_ISBLOCKED		 2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE		 3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE		 4 /* Get largest task stack size. */
-#define PR_MAXPPROCS		 5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC		 6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG		 8 /* When task exit's, set signal. */
-#define PR_RESIDENT		 9 /* Make task unswappable. */
-#define PR_ATTACHADDR		10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR		11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD		12 /* Kill child if the parent dies. */
-#define PR_GETSHMASK		13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE		14 /* Number of share group members. */
-#define PR_COREPID		15 /* Add task pid to name when it core. */
-#define PR_ATTACHADDRPERM	16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT		17 /* Kill a pthread, only for IRIX 6.[234] */
-
-asmlinkage int irix_prctl(unsigned option, ...)
-{
-	va_list args;
-	int error = 0;
-
-	va_start(args, option);
-	switch (option) {
-	case PR_MAXPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = max_threads;
-		break;
-
-	case PR_ISBLOCKED: {
-		struct task_struct *task;
-
-		printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
-		       current->comm, current->pid);
-		read_lock(&tasklist_lock);
-		task = find_task_by_vpid(va_arg(args, pid_t));
-		error = -ESRCH;
-		if (error)
-			error = (task->run_list.next != NULL);
-		read_unlock(&tasklist_lock);
-		/* Can _your_ OS find this out that fast? */
-		break;
-	}
-
-	case PR_SETSTACKSIZE: {
-		long value = va_arg(args, long);
-
-		printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
-		       current->comm, current->pid, (unsigned long) value);
-		if (value > RLIM_INFINITY)
-			value = RLIM_INFINITY;
-		if (capable(CAP_SYS_ADMIN)) {
-			task_lock(current->group_leader);
-			current->signal->rlim[RLIMIT_STACK].rlim_max =
-				current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-			task_unlock(current->group_leader);
-			error = value;
-			break;
-		}
-		task_lock(current->group_leader);
-		if (value > current->signal->rlim[RLIMIT_STACK].rlim_max) {
-			error = -EINVAL;
-			task_unlock(current->group_leader);
-			break;
-		}
-		current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-		task_unlock(current->group_leader);
-		error = value;
-		break;
-	}
-
-	case PR_GETSTACKSIZE:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSTACKSIZE\n",
-		       current->comm, current->pid);
-		error = current->signal->rlim[RLIMIT_STACK].rlim_cur;
-		break;
-
-	case PR_MAXPPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = 1;
-		break;
-
-	case PR_UNBLKONEXEC:
-		printk("irix_prctl[%s:%d]: Wants PR_UNBLKONEXEC\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_SETEXITSIG:
-		printk("irix_prctl[%s:%d]: Wants PR_SETEXITSIG\n",
-		       current->comm, current->pid);
-
-		/* We can probably play some game where we set the task
-		 * exit_code to some non-zero value when this is requested,
-		 * and check whether exit_code is already set in do_exit().
-		 */
-		error = -EINVAL;
-		break;
-
-	case PR_RESIDENT:
-		printk("irix_prctl[%s:%d]: Wants PR_RESIDENT\n",
-		       current->comm, current->pid);
-		error = 0; /* Compatibility indeed. */
-		break;
-
-	case PR_ATTACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_DETACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_DETACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_TERMCHILD:
-		printk("irix_prctl[%s:%d]: Wants PR_TERMCHILD\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_GETSHMASK:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSHMASK\n",
-		       current->comm, current->pid);
-		error = -EINVAL; /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_GETNSHARE:
-		error = 0;       /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_COREPID:
-		printk("irix_prctl[%s:%d]: Wants PR_COREPID\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_ATTACHADDRPERM:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDRPERM\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	default:
-		printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
-		       current->comm, current->pid, option);
-		error = -EINVAL;
-		break;
-	}
-	va_end(args);
-
-	return error;
-}
-
-#undef DEBUG_PROCGRPS
-
-extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
-extern char *prom_getenv(char *name);
-extern long prom_setenv(char *name, char *value);
-
-/* The syssgi commands supported thus far. */
-#define SGI_SYSID         1       /* Return unique per-machine identifier. */
-#define SGI_INVENT        5       /* Fetch inventory  */
-#   define SGI_INV_SIZEOF 1
-#   define SGI_INV_READ   2
-#define SGI_RDNAME        6       /* Return string name of a process. */
-#define SGI_SETNVRAM	  8	  /* Set PROM variable. */
-#define SGI_GETNVRAM	  9	  /* Get PROM variable. */
-#define SGI_SETPGID      21       /* Set process group id. */
-#define SGI_SYSCONF      22       /* POSIX sysconf garbage. */
-#define SGI_PATHCONF     24       /* POSIX sysconf garbage. */
-#define SGI_SETGROUPS    40       /* POSIX sysconf garbage. */
-#define SGI_GETGROUPS    41       /* POSIX sysconf garbage. */
-#define SGI_RUSAGE       56       /* BSD style rusage(). */
-#define SGI_SSYNC        62       /* Synchronous fs sync. */
-#define SGI_GETSID       65       /* SysVr4 get session id. */
-#define SGI_ELFMAP       68       /* Map an elf image. */
-#define SGI_TOSSTSAVE   108       /* Toss saved vma's. */
-#define SGI_FP_BCOPY    129       /* Should FPU bcopy be used on this machine? */
-#define SGI_PHYSP      1011       /* Translate virtual into physical page. */
-
-asmlinkage int irix_syssgi(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int retval, base = 0;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case SGI_SYSID: {
-		char __user *buf = (char __user *) regs->regs[base + 5];
-
-		/* XXX Use ethernet addr.... */
-		retval = clear_user(buf, 64) ? -EFAULT : 0;
-		break;
-	}
-#if 0
-	case SGI_RDNAME: {
-		int pid = (int) regs->regs[base + 5];
-		char __user *buf = (char __user *) regs->regs[base + 6];
-		struct task_struct *p;
-		char tcomm[sizeof(current->comm)];
-
-		read_lock(&tasklist_lock);
-		p = find_task_by_pid(pid);
-		if (!p) {
-			read_unlock(&tasklist_lock);
-			retval = -ESRCH;
-			break;
-		}
-		get_task_comm(tcomm, p);
-		read_unlock(&tasklist_lock);
-
-		/* XXX Need to check sizes. */
-		retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_GETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *buf = (char __user *) regs->regs[base+6];
-		char *value;
-		return -EINVAL;	/* til I fix it */
-		value = prom_getenv(name);	/* PROM lock?  */
-		if (!value) {
-			retval = -EINVAL;
-			break;
-		}
-		/* Do I strlen() for the length? */
-		retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_SETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *value = (char __user *) regs->regs[base+6];
-		return -EINVAL;	/* til I fix it */
-		retval = prom_setenv(name, value);
-		/* XXX make sure retval conforms to syssgi(2) */
-		printk("[%s:%d] setnvram(\"%s\", \"%s\"): retval %d",
-		       current->comm, current->pid, name, value, retval);
-/*		if (retval == PROM_ENOENT)
-		  	retval = -ENOENT; */
-		break;
-	}
-#endif
-
-	case SGI_SETPGID: {
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] setpgid(%d, %d) ",
-		       current->comm, current->pid,
-		       (int) regs->regs[base + 5], (int)regs->regs[base + 6]);
-#endif
-		retval = sys_setpgid(regs->regs[base + 5], regs->regs[base + 6]);
-
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-	}
-
-	case SGI_SYSCONF: {
-		switch(regs->regs[base + 5]) {
-		case 1:
-			retval = (MAX_ARG_PAGES >> 4); /* XXX estimate... */
-			goto out;
-		case 2:
-			retval = max_threads;
-			goto out;
-		case 3:
-			retval = HZ;
-			goto out;
-		case 4:
-			retval = NGROUPS_MAX;
-			goto out;
-		case 5:
-			retval = sysctl_nr_open;
-			goto out;
-		case 6:
-			retval = 1;
-			goto out;
-		case 7:
-			retval = 1;
-			goto out;
-		case 8:
-			retval = 199009;
-			goto out;
-		case 11:
-			retval = PAGE_SIZE;
-			goto out;
-		case 12:
-			retval = 4;
-			goto out;
-		case 25:
-		case 26:
-		case 27:
-		case 28:
-		case 29:
-		case 30:
-			retval = 0;
-			goto out;
-		case 31:
-			retval = 32;
-			goto out;
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SETGROUPS:
-		retval = sys_setgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_GETGROUPS:
-		retval = sys_getgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_RUSAGE: {
-		struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
-
-		switch((int) regs->regs[base + 5]) {
-		case 0:
-			/* rusage self */
-			retval = getrusage(current, RUSAGE_SELF, ru);
-			goto out;
-
-		case -1:
-			/* rusage children */
-			retval = getrusage(current, RUSAGE_CHILDREN, ru);
-			goto out;
-
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SSYNC:
-		sys_sync();
-		retval = 0;
-		break;
-
-	case SGI_GETSID:
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] getsid(%d) ", current->comm, current->pid,
-		       (int) regs->regs[base + 5]);
-#endif
-		retval = sys_getsid(regs->regs[base + 5]);
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-		break;
-
-	case SGI_ELFMAP:
-		retval = irix_mapelf((int) regs->regs[base + 5],
-				     (struct elf_phdr __user *) regs->regs[base + 6],
-				     (int) regs->regs[base + 7]);
-		break;
-
-	case SGI_TOSSTSAVE:
-		/* XXX We don't need to do anything? */
-		retval = 0;
-		break;
-
-	case SGI_FP_BCOPY:
-		retval = 0;
-		break;
-
-	case SGI_PHYSP: {
-		unsigned long addr = regs->regs[base + 5];
-		int __user *pageno = (int __user *) (regs->regs[base + 6]);
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgdp;
-		pud_t *pudp;
-		pmd_t *pmdp;
-		pte_t *ptep;
-
-		down_read(&mm->mmap_sem);
-		pgdp = pgd_offset(mm, addr);
-		pudp = pud_offset(pgdp, addr);
-		pmdp = pmd_offset(pudp, addr);
-		ptep = pte_offset(pmdp, addr);
-		retval = -EINVAL;
-		if (ptep) {
-			pte_t pte = *ptep;
-
-			if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
-				/* b0rked on 64-bit */
-				retval =  put_user((pte_val(pte) & PAGE_MASK) >>
-				                   PAGE_SHIFT, pageno);
-			}
-		}
-		up_read(&mm->mmap_sem);
-		break;
-	}
-
-	case SGI_INVENT: {
-		int  arg1    = (int)    regs->regs [base + 5];
-		void __user *buffer = (void __user *) regs->regs [base + 6];
-		int  count   = (int)    regs->regs [base + 7];
-
-		switch (arg1) {
-		case SGI_INV_SIZEOF:
-			retval = sizeof(inventory_t);
-			break;
-		case SGI_INV_READ:
-			retval = dump_inventory_to_user(buffer, count);
-			break;
-		default:
-			retval = -EINVAL;
-		}
-		break;
-	}
-
-	default:
-		printk("irix_syssgi: Unsupported command %d\n", (int)cmd);
-		retval = -EINVAL;
-		break;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_gtime(struct pt_regs *regs)
-{
-	return get_seconds();
-}
-
-/*
- * IRIX is completely broken... it returns 0 on success, otherwise
- * ENOMEM.
- */
-asmlinkage int irix_brk(unsigned long brk)
-{
-	unsigned long rlim;
-	unsigned long newbrk, oldbrk;
-	struct mm_struct *mm = current->mm;
-	int ret;
-
-	down_write(&mm->mmap_sem);
-	if (brk < mm->end_code) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(mm->brk);
-	if (oldbrk == newbrk) {
-		mm->brk = brk;
-		ret = 0;
-		goto out;
-	}
-
-	/*
-	 * Always allow shrinking brk
-	 */
-	if (brk <= mm->brk) {
-		mm->brk = brk;
-		do_munmap(mm, newbrk, oldbrk-newbrk);
-		ret = 0;
-		goto out;
-	}
-	/*
-	 * Check against rlimit and stack..
-	 */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (brk - mm->end_code > rlim) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Check against existing mmap mappings.
-	 */
-	if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Ok, looks good - let it rip.
-	 */
-	if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	mm->brk = brk;
-	ret = 0;
-
-out:
-	up_write(&mm->mmap_sem);
-	return ret;
-}
-
-asmlinkage int irix_getpid(struct pt_regs *regs)
-{
-	regs->regs[3] = task_pid_vnr(current->real_parent);
-	return task_pid_vnr(current);
-}
-
-asmlinkage int irix_getuid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->euid;
-	return current->uid;
-}
-
-asmlinkage int irix_getgid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->egid;
-	return current->gid;
-}
-
-asmlinkage int irix_stime(int value)
-{
-	int err;
-	struct timespec tv;
-
-	tv.tv_sec = value;
-	tv.tv_nsec = 0;
-	err = security_settime(&tv, NULL);
-	if (err)
-		return err;
-
-	write_seqlock_irq(&xtime_lock);
-	xtime.tv_sec = value;
-	xtime.tv_nsec = 0;
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-
-	return 0;
-}
-
-static inline void jiffiestotv(unsigned long jiffies, struct timeval *value)
-{
-	value->tv_usec = (jiffies % HZ) * (1000000 / HZ);
-	value->tv_sec = jiffies / HZ;
-}
-
-static inline void getitimer_real(struct itimerval *value)
-{
-	register unsigned long val, interval;
-
-	interval = current->it_real_incr;
-	val = 0;
-	if (del_timer(&current->real_timer)) {
-		unsigned long now = jiffies;
-		val = current->real_timer.expires;
-		add_timer(&current->real_timer);
-		/* look out for negative/zero itimer.. */
-		if (val <= now)
-			val = now+1;
-		val -= now;
-	}
-	jiffiestotv(val, &value->it_value);
-	jiffiestotv(interval, &value->it_interval);
-}
-
-asmlinkage unsigned int irix_alarm(unsigned int seconds)
-{
-	return alarm_setitimer(seconds);
-}
-
-asmlinkage int irix_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-
-	return -EINTR;
-}
-
-/* XXX need more than this... */
-asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
-	unsigned long flags, char __user *type, void __user *data, int datalen)
-{
-	printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
-	       current->comm, current->pid,
-	       dev_name, dir_name, flags, type, data, datalen);
-
-	return sys_mount(dev_name, dir_name, type, flags, data);
-}
-
-struct irix_statfs {
-	short f_type;
-	long  f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree;
-	char  f_fname[6], f_fpack[6];
-};
-
-asmlinkage int irix_statfs(const char __user *path,
-	struct irix_statfs __user *buf, int len, int fs_type)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	/* We don't support this feature yet. */
-	if (fs_type) {
-		error = -EINVAL;
-		goto out;
-	}
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(path, &nd);
-	if (error)
-		goto out;
-
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_setpgrp(int flags)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags);
-#endif
-	if(!flags)
-		error = task_pgrp_vnr(current);
-	else
-		error = sys_setsid();
-#ifdef DEBUG_PROCGRPS
-	printk("returning %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_times(struct tms __user *tbuf)
-{
-	int err = 0;
-
-	if (tbuf) {
-		if (!access_ok(VERIFY_WRITE, tbuf, sizeof *tbuf))
-			return -EFAULT;
-
-		err = __put_user(current->utime, &tbuf->tms_utime);
-		err |= __put_user(current->stime, &tbuf->tms_stime);
-		err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
-		err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
-	}
-
-	return err;
-}
-
-asmlinkage int irix_exec(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  NULL, regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage int irix_exece(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  (char __user * __user *) (long)regs->regs[base + 6], regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage unsigned long irix_gethostid(void)
-{
-	printk("[%s:%d]: irix_gethostid() called...\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage unsigned long irix_sethostid(unsigned long val)
-{
-	printk("[%s:%d]: irix_sethostid(%08lx) called...\n",
-	       current->comm, current->pid, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_socket(int family, int type, int protocol)
-{
-	switch(type) {
-	case 1:
-		type = SOCK_DGRAM;
-		break;
-
-	case 2:
-		type = SOCK_STREAM;
-		break;
-
-	case 3:
-		type = 9; /* Invalid... */
-		break;
-
-	case 4:
-		type = SOCK_RAW;
-		break;
-
-	case 5:
-		type = SOCK_RDM;
-		break;
-
-	case 6:
-		type = SOCK_SEQPACKET;
-		break;
-
-	default:
-		break;
-	}
-
-	return sys_socket(family, type, protocol);
-}
-
-asmlinkage int irix_getdomainname(char __user *name, int len)
-{
-	int err;
-
-	down_read(&uts_sem);
-	if (len > __NEW_UTS_LEN)
-		len = __NEW_UTS_LEN;
-	err = copy_to_user(name, utsname()->domainname, len) ? -EFAULT : 0;
-	up_read(&uts_sem);
-
-	return err;
-}
-
-asmlinkage unsigned long irix_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
-asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4)
-{
-	switch (opcode) {
-	case 0:
-		return sys_msgget((key_t) arg0, (int) arg1);
-	case 1:
-		return sys_msgctl((int) arg0, (int) arg1,
-		                  (struct msqid_ds __user *)arg2);
-	case 2:
-		return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (long) arg3, (int) arg4);
-	case 3:
-		return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (int) arg3);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3)
-{
-	switch (opcode) {
-	case 0:
-		return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
-				 (unsigned long *) arg3);
-	case 1:
-		return sys_shmctl((int)arg0, (int)arg1,
-		                  (struct shmid_ds __user *)arg2);
-	case 2:
-		return sys_shmdt((char __user *)arg0);
-	case 3:
-		return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, int arg3)
-{
-	switch (opcode) {
-	case 0:
-		return sys_semctl((int) arg0, (int) arg1, (int) arg2,
-				  (union semun) arg3);
-	case 1:
-		return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
-	case 2:
-		return sys_semop((int) arg0, (struct sembuf __user *)arg1,
-				 (unsigned int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-static inline loff_t llseek(struct file *file, loff_t offset, int origin)
-{
-	loff_t (*fn)(struct file *, loff_t, int);
-	loff_t retval;
-
-	fn = default_llseek;
-	if (file->f_op && file->f_op->llseek)
-	fn = file->f_op->llseek;
-	lock_kernel();
-	retval = fn(file, offset, origin);
-	unlock_kernel();
-
-	return retval;
-}
-
-asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
-                            int origin)
-{
-	struct file * file;
-	loff_t offset;
-	int retval;
-
-	retval = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto bad;
-	retval = -EINVAL;
-	if (origin > 2)
-		goto out_putf;
-
-	offset = llseek(file, ((loff_t) offhi << 32) | offlow, origin);
-	retval = (int) offset;
-
-out_putf:
-	fput(file);
-bad:
-	return retval;
-}
-
-asmlinkage int irix_sginap(int ticks)
-{
-	schedule_timeout_interruptible(ticks);
-	return 0;
-}
-
-asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
-{
-	return -EINVAL;
-}
-
-asmlinkage int irix_gettimeofday(struct timeval __user *tv)
-{
-	time_t sec;
-	long nsec, seq;
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, tv, sizeof(struct timeval)))
-		return -EFAULT;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		sec = xtime.tv_sec;
-		nsec = xtime.tv_nsec;
-	} while (read_seqretry(&xtime_lock, seq));
-
-	err = __put_user(sec, &tv->tv_sec);
-	err |= __put_user((nsec / 1000), &tv->tv_usec);
-
-	return err;
-}
-
-#define IRIX_MAP_AUTOGROW 0x40
-
-asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot,
-				     int flags, int fd, off_t offset)
-{
-	struct file *file = NULL;
-	unsigned long retval;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		 * when reading this.  */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = offset + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file, addr, len, prot, flags, offset);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-
-	return retval;
-}
-
-asmlinkage int irix_madvise(unsigned long addr, int len, int behavior)
-{
-	printk("[%s:%d] Wheee.. irix_madvise(%08lx,%d,%d)\n",
-	       current->comm, current->pid, addr, len, behavior);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pagelock(char __user *addr, int len, int op)
-{
-	printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
-	       current->comm, current->pid, addr, len, op);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_quotactl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_quotactl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_BSDsetpgrp(int pid, int pgrp)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] BSDsetpgrp(%d, %d) ", current->comm, current->pid,
-	       pid, pgrp);
-#endif
-	if(!pid)
-		pid = task_pid_vnr(current);
-
-	/* Wheee, weird sysv thing... */
-	if ((pgrp == 0) && (pid == task_pid_vnr(current)))
-		error = sys_setsid();
-	else
-		error = sys_setpgid(pid, pgrp);
-
-#ifdef DEBUG_PROCGRPS
-	printk("error = %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
-{
-	printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
-	       current->comm, current->pid, cmd, buf, cnt);
-
-	return -EINVAL;
-}
-
-struct iuname {
-	char sysname[257], nodename[257], release[257];
-	char version[257], machine[257];
-	char m_type[257], base_rel[257];
-	char _unused0[257], _unused1[257], _unused2[257];
-	char _unused3[257], _unused4[257], _unused5[257];
-};
-
-asmlinkage int irix_uname(struct iuname __user *buf)
-{
-	down_read(&uts_sem);
-	if (copy_from_user(utsname()->sysname, buf->sysname, 65)
-	    || copy_from_user(utsname()->nodename, buf->nodename, 65)
-	    || copy_from_user(utsname()->release, buf->release, 65)
-	    || copy_from_user(utsname()->version, buf->version, 65)
-	    || copy_from_user(utsname()->machine, buf->machine, 65)) {
-		return -EFAULT;
-	}
-	up_read(&uts_sem);
-
-	return 1;
-}
-
-#undef DEBUG_XSTAT
-
-static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat32 {
-		u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
-		u32 st_rdev, st_pad2[2], st_size, st_pad3;
-		u32 st_atime0, st_atime1;
-		u32 st_mtime0, st_mtime1;
-		u32 st_ctime0, st_ctime1;
-		u32 st_blksize, st_blocks;
-		char st_fstype[16];
-		u32 st_pad4[8];
-	} ub;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-	ub.st_dev     = sysv_encode_dev(stat->dev);
-	ub.st_ino     = stat->ino;
-	ub.st_mode    = stat->mode;
-	ub.st_nlink   = stat->nlink;
-	SET_UID(ub.st_uid, stat->uid);
-	SET_GID(ub.st_gid, stat->gid);
-	ub.st_rdev    = sysv_encode_dev(stat->rdev);
-#if BITS_PER_LONG == 32
-	if (stat->size > MAX_NON_LFS)
-		return -EOVERFLOW;
-#endif
-	ub.st_size    = stat->size;
-	ub.st_atime0  = stat->atime.tv_sec;
-	ub.st_atime1  = stat->atime.tv_nsec;
-	ub.st_mtime0  = stat->mtime.tv_sec;
-	ub.st_mtime1  = stat->atime.tv_nsec;
-	ub.st_ctime0  = stat->ctime.tv_sec;
-	ub.st_ctime1  = stat->atime.tv_nsec;
-	ub.st_blksize = stat->blksize;
-	ub.st_blocks  = stat->blocks;
-	strcpy(ub.st_fstype, "efs");
-
-	return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
-}
-
-static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat64 {
-		u32 st_dev; s32 st_pad1[3];
-		unsigned long long st_ino;
-		u32 st_mode;
-		u32 st_nlink; s32 st_uid; s32 st_gid; u32 st_rdev;
-		s32 st_pad2[2];
-		long long st_size;
-		s32 st_pad3;
-		struct { s32 tv_sec, tv_nsec; } st_atime, st_mtime, st_ctime;
-		s32 st_blksize;
-		long long  st_blocks;
-		char st_fstype[16];
-		s32 st_pad4[8];
-	} ks;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ks.st_dev = sysv_encode_dev(stat->dev);
-	ks.st_pad1[0] = ks.st_pad1[1] = ks.st_pad1[2] = 0;
-	ks.st_ino = (unsigned long long) stat->ino;
-	ks.st_mode = (u32) stat->mode;
-	ks.st_nlink = (u32) stat->nlink;
-	ks.st_uid = (s32) stat->uid;
-	ks.st_gid = (s32) stat->gid;
-	ks.st_rdev = sysv_encode_dev(stat->rdev);
-	ks.st_pad2[0] = ks.st_pad2[1] = 0;
-	ks.st_size = (long long) stat->size;
-	ks.st_pad3 = 0;
-
-	/* XXX hackety hack... */
-	ks.st_atime.tv_sec = (s32) stat->atime.tv_sec;
-	ks.st_atime.tv_nsec = stat->atime.tv_nsec;
-	ks.st_mtime.tv_sec = (s32) stat->mtime.tv_sec;
-	ks.st_mtime.tv_nsec = stat->mtime.tv_nsec;
-	ks.st_ctime.tv_sec = (s32) stat->ctime.tv_sec;
-	ks.st_ctime.tv_nsec = stat->ctime.tv_nsec;
-
-	ks.st_blksize = (s32) stat->blksize;
-	ks.st_blocks = (long long) stat->blocks;
-	memset(ks.st_fstype, 0, 16);
-	ks.st_pad4[0] = ks.st_pad4[1] = ks.st_pad4[2] = ks.st_pad4[3] = 0;
-	ks.st_pad4[4] = ks.st_pad4[5] = ks.st_pad4[6] = ks.st_pad4[7] = 0;
-
-	/* Now write it all back. */
-	return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
-}
-
-asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int retval;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_xstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	retval = vfs_stat(filename, &stat);
-	if (!retval) {
-		switch(version) {
-			case 2:
-				retval = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				retval = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				retval = -EINVAL;
-		}
-	}
-	return retval;
-}
-
-asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_lxstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	error = vfs_lstat(filename, &stat);
-
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_fxstat(%d,%d,%p) ",
-	       current->comm, current->pid, version, fd, statbuf);
-#endif
-
-	error = vfs_fstat(fd, &stat);
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
-{
-	int retval;
-	printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
-	       current->comm, current->pid, ver, filename, mode, dev);
-
-	switch(ver) {
-	case 2:
-		/* shouldn't we convert here as well as on stat()? */
-		retval = sys_mknod(filename, mode, dev);
-		break;
-
-	default:
-		retval = -EINVAL;
-		break;
-	};
-
-	return retval;
-}
-
-asmlinkage int irix_swapctl(int cmd, char __user *arg)
-{
-	printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
-	       current->comm, current->pid, cmd, arg);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs {
-	u32 f_bsize; u32 f_frsize; u32 f_blocks;
-	u32 f_bfree; u32 f_bavail; u32 f_files; u32 f_ffree; u32 f_favail;
-	u32 f_fsid; char f_basetype[16];
-	u32 f_flag; u32 f_namemax;
-	char	f_fstr[32]; u32 f_filler[16];
-};
-
-asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for (i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for (i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_priocntl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_priocntl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sigqueue(int pid, int sig, int code, int val)
-{
-	printk("[%s:%d] Wheee.. irix_sigqueue(%d,%d,%d,%d)\n",
-	       current->comm, current->pid, pid, sig, code, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_truncate(name, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_ftruncate64(int fd, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_ftruncate(fd, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_mmap64(struct pt_regs *regs)
-{
-	int len, prot, flags, fd, off1, off2, error, base = 0;
-	unsigned long addr, pgoff, *sp;
-	struct file *file = NULL;
-	int err;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	sp = (unsigned long *) (regs->regs[29] + 16);
-	addr = regs->regs[base + 4];
-	len = regs->regs[base + 5];
-	prot = regs->regs[base + 6];
-	if (!base) {
-		flags = regs->regs[base + 7];
-		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
-			return -EFAULT;
-		fd = sp[0];
-		err = __get_user(off1, &sp[1]);
-		err |= __get_user(off2, &sp[2]);
-	} else {
-		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
-			return -EFAULT;
-		err = __get_user(flags, &sp[0]);
-		err |= __get_user(fd, &sp[1]);
-		err |= __get_user(off1, &sp[2]);
-		err |= __get_user(off2, &sp[3]);
-	}
-
-	if (err)
-		return err;
-
-	if (off1 & PAGE_MASK)
-		return -EOVERFLOW;
-
-	pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		   when reading this */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = off2 + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-
-	return error;
-}
-
-asmlinkage int irix_dmi(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_dmi()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
-			  int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
-			   int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sgifastpath(int cmd, unsigned long arg0, unsigned long arg1,
-				unsigned long arg2, unsigned long arg3,
-				unsigned long arg4, unsigned long arg5)
-{
-	printk("[%s:%d] Wheee.. irix_fastpath(%d,%08lx,%08lx,%08lx,%08lx,"
-	       "%08lx,%08lx)\n",
-	       current->comm, current->pid, cmd, arg0, arg1, arg2,
-	       arg3, arg4, arg5);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs64 {
-	u32  f_bsize; u32 f_frsize;
-	u64  f_blocks; u64 f_bfree; u64 f_bavail;
-	u64  f_files; u64 f_ffree; u64 f_favail;
-	u32  f_fsid;
-	char f_basetype[16];
-	u32  f_flag; u32 f_namemax;
-	char f_fstr[32];
-	u32  f_filler[16];
-};
-
-asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs64(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for(i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs64(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
-{
-	int err;
-
-	printk("[%s:%d] irix_getmountid(%s, %p)\n",
-	       current->comm, current->pid, fname, midbuf);
-	if (!access_ok(VERIFY_WRITE, midbuf, (sizeof(unsigned long) * 4)))
-		return -EFAULT;
-
-	/*
-	 * The idea with this system call is that when trying to determine
-	 * 'pwd' and it's a toss-up for some reason, userland can use the
-	 * fsid of the filesystem to try and make the right decision, but
-	 * we don't have this so for now. XXX
-	 */
-	err = __put_user(0, &midbuf[0]);
-	err |= __put_user(0, &midbuf[1]);
-	err |= __put_user(0, &midbuf[2]);
-	err |= __put_user(0, &midbuf[3]);
-
-	return err;
-}
-
-asmlinkage int irix_nsproc(unsigned long entry, unsigned long mask,
-			   unsigned long arg, unsigned long sp, int slen)
-{
-	printk("[%s:%d] Wheee.. irix_nsproc(%08lx,%08lx,%08lx,%08lx,%d)\n",
-	       current->comm, current->pid, entry, mask, arg, sp, slen);
-
-	return -EINVAL;
-}
-
-#undef DEBUG_GETDENTS
-
-struct irix_dirent32 {
-	u32  d_ino;
-	u32  d_off;
-	unsigned short  d_reclen;
-	char d_name[1];
-};
-
-struct irix_dirent32_callback {
-	struct irix_dirent32 __user *current_dir;
-	struct irix_dirent32 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-
-static int irix_filldir32(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent32 __user *dirent;
-	struct irix_dirent32_callback *buf = __buf;
-	unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
-	int err = 0;
-	u32 d_ino;
-
-#ifdef DEBUG_GETDENTS
-	printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
-	       reclen, namlen, buf->count);
-#endif
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->current_dir;
-	err |= __put_user(dirent, &buf->previous);
-	err |= __put_user(d_ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-	dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
-
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
-	unsigned int count, int __user *eob)
-{
-	struct file *file;
-	struct irix_dirent32 __user *lastdirent;
-	struct irix_dirent32_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents(%d, %p, %d, %p) ", current->comm,
-	       current->pid, fd, dirent, count, eob);
-#endif
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = (struct irix_dirent32 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, irix_filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
-	}
-
-	if (put_user(0, eob) < 0) {
-		error = -EFAULT;
-		goto out_putf;
-	}
-
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, count - buf.count);
-#endif
-	error = count - buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-struct irix_dirent64 {
-	u64            d_ino;
-	u64            d_off;
-	unsigned short d_reclen;
-	char           d_name[1];
-};
-
-struct irix_dirent64_callback {
-	struct irix_dirent64 __user *curr;
-	struct irix_dirent64 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
-
-static int irix_filldir64(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent64 __user *dirent;
-	struct irix_dirent64_callback * buf = __buf;
-	unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
-	int err = 0;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
-		return -EFAULT;
-
-	if (__put_user(-EINVAL, &buf->error))	/* only used if we fail.. */
-		return -EFAULT;
-	if (reclen > buf->count)
-		return -EINVAL;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->curr;
-	buf->previous = dirent;
-	err |= __put_user(ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
-	       ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-
-	dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
-
-	buf->curr = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] getdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("returning %d\n", cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt) ||
-	    !access_ok(VERIFY_WRITE, eob, sizeof(*eob)))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	*eob = 0;
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long arg)
-{
-	int retval;
-
-	switch (op) {
-	case 1:
-		/* Reboot */
-		printk("[%s:%d] irix_uadmin: Wants to reboot...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		/* Shutdown */
-		printk("[%s:%d] irix_uadmin: Wants to shutdown...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-		/* Remount-root */
-		printk("[%s:%d] irix_uadmin: Wants to remount root...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 8:
-		/* Kill all tasks. */
-		printk("[%s:%d] irix_uadmin: Wants to kill all tasks...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 256:
-		/* Set magic mushrooms... */
-		printk("[%s:%d] irix_uadmin: Wants to set magic mushroom[%d]...\n",
-		       current->comm, current->pid, (int) func);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_uadmin: Unknown operation [%d]...\n",
-		       current->comm, current->pid, (int) op);
-		retval = -EINVAL;
-		goto out;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
-{
-	int retval;
-
-	switch(type) {
-	case 0:
-		/* uname() */
-		retval = irix_uname((struct iuname __user *)inbuf);
-		goto out;
-
-	case 2:
-		/* ustat() */
-		printk("[%s:%d] irix_utssys: Wants to do ustat()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		/* fusers() */
-		printk("[%s:%d] irix_utssys: Wants to do fusers()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_utssys: Wants to do unknown type[%d]\n",
-		       current->comm, current->pid, (int) type);
-		retval = -EINVAL;
-		goto out;
-	}
-
-out:
-	return retval;
-}
-
-#undef DEBUG_FCNTL
-
-#define IRIX_F_ALLOCSP 10
-
-asmlinkage int irix_fcntl(int fd, int cmd, int arg)
-{
-	int retval;
-
-#ifdef DEBUG_FCNTL
-	printk("[%s:%d] irix_fcntl(%d, %d, %d) ", current->comm,
-	       current->pid, fd, cmd, arg);
-#endif
-	if (cmd == IRIX_F_ALLOCSP){
-		return 0;
-	}
-	retval = sys_fcntl(fd, cmd, arg);
-#ifdef DEBUG_FCNTL
-	printk("%d\n", retval);
-#endif
-	return retval;
-}
-
-asmlinkage int irix_ulimit(int cmd, int arg)
-{
-	int retval;
-
-	switch(cmd) {
-	case 1:
-		printk("[%s:%d] irix_ulimit: Wants to get file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		printk("[%s:%d] irix_ulimit: Wants to set file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		printk("[%s:%d] irix_ulimit: Wants to get brk limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-#if 0
-		printk("[%s:%d] irix_ulimit: Wants to get fd limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-#endif
-		retval = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		goto out;
-
-	case 5:
-		printk("[%s:%d] irix_ulimit: Wants to get txt offset.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_ulimit: Unknown command [%d].\n",
-		       current->comm, current->pid, cmd);
-		retval = -EINVAL;
-		goto out;
-	}
-out:
-	return retval;
-}
-
-asmlinkage int irix_unimp(struct pt_regs *regs)
-{
-	printk("irix_unimp [%s:%d] v0=%d v1=%d a0=%08lx a1=%08lx a2=%08lx "
-	       "a3=%08lx\n", current->comm, current->pid,
-	       (int) regs->regs[2], (int) regs->regs[3],
-	       regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
-
-	return -ENOSYS;
-}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index f9165d1a17bf..b8ea4e9d0d87 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -71,7 +71,6 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
-void (*board_watchpoint_handler)(struct pt_regs *regs);
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -249,11 +248,11 @@ static void __show_regs(const struct pt_regs *regs)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %0*lx ", field, regs->cp0_epc);
-	print_symbol("%s ", regs->cp0_epc);
+	printk("epc   : %0*lx %pS\n", field, regs->cp0_epc,
+	       (void *) regs->cp0_epc);
 	printk("    %s\n", print_tainted());
-	printk("ra    : %0*lx ", field, regs->regs[31]);
-	print_symbol("%s\n", regs->regs[31]);
+	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
+	       (void *) regs->regs[31]);
 
 	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
 
@@ -892,11 +891,6 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
-	if (board_watchpoint_handler) {
-		(*board_watchpoint_handler)(regs);
-		return;
-	}
-
 	/*
 	 * We use the watch exception where available to detect stack
 	 * overflows.
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index a56c15026965..d1ac7a25c856 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -22,8 +22,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
+#include <asm/lasat/lasat.h>
 #include <asm/lasat/lasatint.h>
 
 #include <irq.h>
@@ -112,23 +112,18 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200()) {
 		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
 		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
 		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
 		get_int_status = get_int_status_200;
 		*lasat_int_mask &= 0xffff;
-		break;
-	default:
-		panic("arch_init_irq: mips_machtype incorrect");
+	} else {
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
+		get_int_status = get_int_status_100;
+		*lasat_int_mask = 0;
 	}
 
 	mips_cpu_irq_init();
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index 31e328b3814d..577bb463a871 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -24,7 +24,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/mutex.h>
-#include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
@@ -66,7 +65,7 @@ static void init_flash_sizes(void)
 	ls[LASAT_MTD_SERVICE] = 0xC0000;
 	ls[LASAT_MTD_NORMAL] = 0x100000;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_board_info.li_flash_base = 0x1e000000;
 
 		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index 209edcc26f07..6acc6cb85f0a 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -86,18 +86,16 @@ void __init prom_init(void)
 
 	setup_prom_vectors();
 
-	if (current_cpu_data.cputype == CPU_R5000) {
+	if (IS_LASAT_200()) {
 		printk(KERN_INFO "LASAT 200 board\n");
-		mips_machtype = MACH_LASAT_200;
 		lasat_ndelay_divider = LASAT_200_DIVIDER;
+		at93c = &at93c_defs[1];
 	} else {
 		printk(KERN_INFO "LASAT 100 board\n");
-		mips_machtype = MACH_LASAT_100;
 		lasat_ndelay_divider = LASAT_100_DIVIDER;
+		at93c = &at93c_defs[0];
 	}
 
-	at93c = &at93c_defs[mips_machtype];
-
 	lasat_init_board_info();		/* Read info from EEPROM */
 
 	/* Get the command line */
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
index 205bd397d75b..5bcb6e89ab78 100644
--- a/arch/mips/lasat/serial.c
+++ b/arch/mips/lasat/serial.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
 #include <asm/lasat/lasat.h>
 #include <asm/lasat/serial.h>
 
@@ -47,7 +46,7 @@ static __init int lasat_uart_add(void)
 	if (!pdev)
 		return -ENOMEM;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
 		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
 		lasat_serial_res[0].flags = IORESOURCE_MEM;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index e072da4ff3b3..dbd3163a85c2 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -127,9 +127,11 @@ void __init plat_time_init(void)
 void __init plat_mem_setup(void)
 {
 	int i;
-	lasat_misc  = &lasat_misc_info[mips_machtype];
+	int lasat_type = IS_LASAT_200() ? 1 : 0;
+
+	lasat_misc  = &lasat_misc_info[lasat_type];
 #ifdef CONFIG_PICVUE
-	picvue = &pvc_defs[mips_machtype];
+	picvue = &pvc_defs[lasat_type];
 #endif
 
 	/* Set up panic notifier */
@@ -140,7 +142,7 @@ void __init plat_mem_setup(void)
 	lasat_reboot_setup();
 
 #ifdef CONFIG_DS1603
-	ds1603 = &ds_defs[mips_machtype];
+	ds1603 = &ds_defs[lasat_type];
 #endif
 
 #ifdef DYNAMIC_SERIAL_INIT
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile
deleted file mode 100644
index f71c2dd1041a..000000000000
--- a/arch/mips/mips-boards/atlas/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-
-obj-y			:= atlas_int.o atlas_setup.o
-obj-$(CONFIG_KGDB)	+= atlas_gdb.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c
deleted file mode 100644
index 00c98cff62dc..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_gdb.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <asm/io.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/saa9730_uart.h>
-
-#define INB(a)     inb((unsigned long)a)
-#define OUTB(x, a)  outb(x, (unsigned long)a)
-
-/*
- * This is the interface to the remote debugger stub
- * if the Philips part is used for the debug port,
- * called from the platform setup code.
- */
-void *saa9730_base = (void *)ATLAS_SAA9730_REG;
-
-static int saa9730_kgdb_active = 0;
-
-#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1)
-
-int saa9730_kgdb_hook(int speed)
-{
-	int baudclock;
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        /*
-         * Clear all interrupts
-         */
-	(void) INB(&kgdb_uart->Lsr);
-	(void) INB(&kgdb_uart->Msr);
-	(void) INB(&kgdb_uart->Thr_Rbr);
-	(void) INB(&kgdb_uart->Iir_Fcr);
-
-        /*
-         * Now, initialize the UART
-         */
-	/* 8 data bits, one stop bit, no parity */
-	OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr);
-
-	baudclock = SAA9730_BAUDCLOCK(speed);
-
-	OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb);
-	OUTB( baudclock        & 0xff, &kgdb_uart->BaudDivLsb);
-
-	/* Set RTS/DTR active */
-	OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr);
-	saa9730_kgdb_active = 1;
-
-	return speed;
-}
-
-int saa9730_putDebugChar(char c)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE))
-                ;
-	OUTB(c, &kgdb_uart->Thr_Rbr);
-
-        return 1;
-}
-
-char saa9730_getDebugChar(void)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-	char c;
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR))
-                ;
-
-	c = INB(&kgdb_uart->Thr_Rbr);
-	return(c);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
deleted file mode 100644
index 6fb29c3ff62d..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2006  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Atlas board.
- *
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-
-#include <asm/gdb-stub.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/msc01_ic.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/mips-boards/generic.h>
-
-static struct atlas_ictrl_regs *atlas_hw0_icregs;
-
-#if 0
-#define DEBUG_INT(x...) printk(x)
-#else
-#define DEBUG_INT(x...)
-#endif
-
-void disable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-void enable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-static void end_atlas_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_atlas_irq(irq);
-}
-
-static struct irq_chip atlas_irq_type = {
-	.name = "Atlas",
-	.ack = disable_atlas_irq,
-	.mask = disable_atlas_irq,
-	.mask_ack = disable_atlas_irq,
-	.unmask = enable_atlas_irq,
-	.eoi = enable_atlas_irq,
-	.end = end_atlas_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static inline void atlas_hw0_irqdispatch(void)
-{
-	unsigned long int_status;
-	int irq;
-
-	int_status = atlas_hw0_icregs->intstatus;
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (unlikely(int_status == 0))
-		return;
-
-	irq = ATLAS_INT_BASE + ls1bit32(int_status);
-
-	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the Atlas board look basically like (all external interrupt
- * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
- *
- *      MIPS IRQ        Source
- *      --------        ------
- *             0        Software 0 (reschedule IPI on MT)
- *             1        Software 1 (remote call IPI on MT)
- *             2        Combined Atlas hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Software 0
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == MIPSCPU_INT_ATLAS)
-		atlas_hw0_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-static inline void init_atlas_irqs(int base)
-{
-	int i;
-
-	atlas_hw0_icregs = (struct atlas_ictrl_regs *)
-			   ioremap(ATLAS_ICTRL_REGS_BASE,
-				   sizeof(struct atlas_ictrl_regs *));
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	atlas_hw0_icregs->intrsten = 0xffffffff;
-
-	for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++)
-		set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq);
-}
-
-static struct irqaction atlasirq = {
-	.handler = no_action,
-	.name = "Atlas cascade"
-};
-
-msc_irqmap_t __initdata msc_irqmap[] = {
-	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-};
-int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
-
-msc_irqmap_t __initdata msc_eicirqmap[] = {
-	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_ATLAS,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
-};
-int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-
-void __init arch_init_irq(void)
-{
-	init_atlas_irqs(ATLAS_INT_BASE);
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	switch(mips_revision_corid) {
-	case MIPS_REVISION_CORID_CORE_MSC:
-	case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_FPGA3:
-	case MIPS_REVISION_CORID_CORE_FPGA4:
-	case MIPS_REVISION_CORID_CORE_24K:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
-		if (cpu_has_veic)
-			init_msc_irqs(MSC01E_INT_BASE, MSC01E_INT_BASE,
-				      msc_eicirqmap, msc_nr_eicirqs);
-		else
-			init_msc_irqs(MSC01E_INT_BASE, MSC01C_INT_BASE,
-				      msc_irqmap, msc_nr_irqs);
-	}
-
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
-		setup_irq(MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
-	} else if (cpu_has_vint) {
-		set_vi_handler(MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS,
-			       &atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
-#else /* Not SMTC */
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-	} else
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
deleted file mode 100644
index 5c500802271e..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS Atlas";
-}
-
-const char display_string[] = "        LINUX ON ATLAS       ";
-
-void __init plat_mem_setup(void)
-{
-	mips_pcibios_init();
-
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = ATLAS_UART_REGS_BASE;
-#else
-	s.iobase = ATLAS_UART_REGS_BASE+3;
-#endif
-	s.irq = ATLAS_INT_UART;
-	s.uartclk = ATLAS_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
deleted file mode 100644
index f7f87fc09d1e..000000000000
--- a/arch/mips/mips-boards/generic/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS boards generic routines under Linux.
-#
-
-obj-y				:= reset.o display.o init.o memory.o \
-				   cmdline.o time.o
-obj-y				+= amon.o
-
-obj-$(CONFIG_EARLY_PRINTK)	+= console.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= gdb_hook.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
deleted file mode 100644
index db4ad654a6d3..000000000000
--- a/arch/mips/mips-boards/malta/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS Malta specific kernel interface routines
-# under Linux.
-#
-
-obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-
-# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile
deleted file mode 100644
index 3682fe217bd5..000000000000
--- a/arch/mips/mips-boards/sead/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the MIPS SEAD specific kernel interface routines
-# under Linux.
-#
-
-obj-y		:= sead_int.o sead_setup.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
deleted file mode 100644
index ec6dd194c14a..000000000000
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2004  Maciej W. Rozycki
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Sead board.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/mips-boards/seadint.h>
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        UART0 (hw0)
- *             3        UART1 (hw1)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
deleted file mode 100644
index 8aa8e5b7b074..000000000000
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * SEAD specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/sead.h>
-#include <asm/mips-boards/seadint.h>
-#include <asm/time.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS SEAD";
-}
-
-const char display_string[] = "        LINUX ON SEAD       ";
-
-void __init plat_mem_setup(void)
-{
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = SEAD_UART0_REGS_BASE;
-#else
-	s.iobase = SEAD_UART0_REGS_BASE+3;
-#endif
-	s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0;
-	s.uartclk = SEAD_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 1655aa69e133..f467199676a8 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -396,7 +396,7 @@ int __cpuinit uasm_in_compat_space_p(long addr)
 #endif
 }
 
-int __cpuinit uasm_rel_highest(long val)
+static int __cpuinit uasm_rel_highest(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
@@ -405,7 +405,7 @@ int __cpuinit uasm_rel_highest(long val)
 #endif
 }
 
-int __cpuinit uasm_rel_higher(long val)
+static int __cpuinit uasm_rel_higher(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
index 0d6a66f32030..c6d1e3dd82d4 100644
--- a/arch/mips/mm/uasm.h
+++ b/arch/mips/mm/uasm.h
@@ -103,8 +103,6 @@ struct uasm_label {
 void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
 #ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
-int uasm_rel_highest(long val);
-int uasm_rel_higher(long val);
 #endif
 int uasm_rel_hi(long val);
 int uasm_rel_lo(long val);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
new file mode 100644
index 000000000000..f8064446e812
--- /dev/null
+++ b/arch/mips/mti-malta/Makefile
@@ -0,0 +1,21 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Copyright (C) 2008 Wind River Systems, Inc.
+#   written by Ralf Baechle <ralf@linux-mips.org>
+#
+obj-y				:= malta-amon.o malta-cmdline.o \
+				   malta-display.o malta-init.o malta-int.o \
+				   malta-memory.o malta-mtd.o \
+				   malta-platform.o malta-reset.o \
+				   malta-setup.o malta-time.o
+
+obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
+obj-$(CONFIG_PCI)		+= malta-pci.o
+obj-$(CONFIG_KGDB)		+= malta-kgdb.o
+
+# FIXME FIXME FIXME
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mti-malta/malta-amon.c
index 96236bf33838..96236bf33838 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mti-malta/malta-amon.c
diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mti-malta/malta-cmdline.c
index 1871c30ed2eb..1871c30ed2eb 100644
--- a/arch/mips/mips-boards/generic/cmdline.c
+++ b/arch/mips/mti-malta/malta-cmdline.c
diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mti-malta/malta-console.c
index 4d8ab99e4155..43bcfb4f8167 100644
--- a/arch/mips/mips-boards/generic/console.c
+++ b/arch/mips/mti-malta/malta-console.c
@@ -22,30 +22,9 @@
 #include <linux/serial_reg.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlas.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (ATLAS_UART_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#elif defined(CONFIG_MIPS_SEAD)
-
-#include <asm/mips-boards/sead.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (SEAD_UART0_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#else
 
 #define PORT(offset) (0x3f8 + (offset))
 
-#endif
 
 static inline unsigned int serial_in(int offset)
 {
diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mti-malta/malta-display.c
index 2a0057cfc30d..7c8828fcb0ad 100644
--- a/arch/mips/mips-boards/generic/display.c
+++ b/arch/mips/mti-malta/malta-display.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <asm/io.h>
 #include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
 
 extern const char display_string[];
 static unsigned int display_count;
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mti-malta/malta-init.c
index 83b9dc739203..c0653021a171 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -197,14 +197,6 @@ void __init kgdb_config(void)
 			while ((c = *++argptr) && ('0' <= c && c <= '9'))
 				speed = speed * 10 + c - '0';
 		}
-#ifdef CONFIG_MIPS_ATLAS
-		if (line == 1) {
-			speed = saa9730_kgdb_hook(speed);
-			generic_putDebugChar = saa9730_putDebugChar;
-			generic_getDebugChar = saa9730_getDebugChar;
-		}
-		else
-#endif
 		{
 			speed = rs_kgdb_hook(line, speed);
 			generic_putDebugChar = rs_putDebugChar;
@@ -260,9 +252,6 @@ void __init prom_init(void)
 
 	mips_display_message("LINUX");
 
-#ifdef CONFIG_MIPS_SEAD
-	set_io_port_base(KSEG1);
-#else
 	/*
 	 * early setup of _pcictrl_bonito so that we can determine
 	 * the system controller on a CORE_EMUL board
@@ -414,7 +403,6 @@ void __init prom_init(void)
 		mips_display_message("SC Error");
 		while (1);   /* We die here... */
 	}
-#endif
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mti-malta/malta-int.c
index 8c495104b321..ea176113fea9 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -363,6 +363,7 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = {
 
 static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
 
+#if defined(CONFIG_MIPS_MT_SMP)
 /*
  * This GIC specific tabular array defines the association between External
  * Interrupts and CPUs/Core Interrupts. The nature of the External
@@ -394,11 +395,12 @@ static struct gic_intr_map gic_intr_map[] = {
 	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
 	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
 };
+#endif
 
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-int __init gcmp_probe(unsigned long addr, unsigned long size)
+static int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -412,7 +414,8 @@ int __init gcmp_probe(unsigned long addr, unsigned long size)
 	return gcmp_present;
 }
 
-void __init fill_ipi_map(void)
+#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map(void)
 {
 	int i;
 
@@ -422,6 +425,7 @@ void __init fill_ipi_map(void)
 				(1 << (gic_intr_map[i].pin + 2));
 	}
 }
+#endif
 
 void __init arch_init_irq(void)
 {
@@ -527,7 +531,6 @@ void __init arch_init_irq(void)
 				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
 			}
 		};
-#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0]))
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -549,7 +552,7 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < NIPI; i++) {
+		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
 			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
 			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
 
diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mti-malta/malta-kgdb.c
index 6a1854de4579..6a1854de4579 100644
--- a/arch/mips/mips-boards/generic/gdb_hook.c
+++ b/arch/mips/mti-malta/malta-kgdb.c
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mti-malta/malta-memory.c
index 5e443bba5662..61888ff72c87 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -97,7 +97,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 	mdesc[1].base = 0x00001000;
 	mdesc[1].size = 0x000ef000;
 
-#ifdef CONFIG_MIPS_MALTA
 	/*
 	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
 	 * south bridge and PCI access always forwarded to the ISA Bus and
@@ -108,11 +107,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void)
 	mdesc[2].type = yamon_dontuse;
 	mdesc[2].base = 0x000f0000;
 	mdesc[2].size = 0x00010000;
-#else
-	mdesc[2].type = yamon_prom;
-	mdesc[2].base = 0x000f0000;
-	mdesc[2].size = 0x00010000;
-#endif
 
 	mdesc[3].type = yamon_dontuse;
 	mdesc[3].base = 0x00100000;
diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mti-malta/malta-mtd.c
index 8ad9bdf25dce..8ad9bdf25dce 100644
--- a/arch/mips/mips-boards/malta/malta_mtd.c
+++ b/arch/mips/mti-malta/malta-mtd.c
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mti-malta/malta-pci.c
index b9743190609a..b9743190609a 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab3cd3f..83b9bab3cd3f 100644
--- a/arch/mips/mips-boards/malta/malta_platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mti-malta/malta-reset.c
index 583d468d98a9..42dee4da37ba 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -27,15 +27,9 @@
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
-#if defined(CONFIG_MIPS_ATLAS)
-#include <asm/mips-boards/atlas.h>
-#endif
 
 static void mips_machine_restart(char *command);
 static void mips_machine_halt(void);
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void);
-#endif
 
 static void mips_machine_restart(char *command)
 {
@@ -53,23 +47,10 @@ static void mips_machine_halt(void)
 	__raw_writel(GORESET, softres_reg);
 }
 
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void)
-{
-	unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
-
-	writew(ATLAS_GOSTBY, psustby_reg);
-}
-#endif
 
 void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_ATLAS)
-	pm_power_off = atlas_machine_power_off;
-#endif
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
 	pm_power_off = mips_machine_halt;
-#endif
 }
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936ca..e7cad54936ca 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e49454..5ea705e49454 100644
--- a/arch/mips/mips-boards/malta/malta_smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mti-malta/malta-time.c
index fe2cac1b4514..0b97d47691fc 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -42,15 +42,7 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#endif
-#ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
-#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
 
 unsigned long cpu_khz;
 
@@ -76,20 +68,6 @@ static unsigned int __init estimate_cpu_frequency(void)
 	unsigned int prid = read_c0_prid() & 0xffff00;
 	unsigned int count;
 
-#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
-	/*
-	 * The SEAD board doesn't have a real time clock, so we can't
-	 * really calculate the timer frequency
-	 * For now we hardwire the SEAD board frequency to 12MHz.
-	 */
-
-	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
-	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		count = 12000000;
-	else
-		count = 6000000;
-#endif
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
 	unsigned long flags;
 	unsigned int start;
 
@@ -110,7 +88,6 @@ static unsigned int __init estimate_cpu_frequency(void)
 
 	/* restore interrupts */
 	local_irq_restore(flags);
-#endif
 
 	mips_hpt_frequency = count;
 	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c
index c7c763dbe588..21d2955359b3 100644
--- a/arch/mips/nxp/pnx8550/common/platform.c
+++ b/arch/mips/nxp/pnx8550/common/platform.c
@@ -13,6 +13,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
@@ -91,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
-static u64 uart_dmamask = ~(u32)0;
+static u64 uart_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device pnx8550_usb_ohci_device = {
 	.name		= "pnx8550-ohci",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
 	.resource	= pnx8550_usb_ohci_resources,
@@ -111,7 +112,7 @@ static struct platform_device pnx8550_uart_device = {
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &uart_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 		.platform_data = pnx8xxx_ports,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ed0c07622baa..57e34cafa497 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -11,17 +11,16 @@ obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
 obj-$(CONFIG_PCI_GT64XXX_PCI0)	+= ops-gt64xxx_pci0.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
+obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
-obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
@@ -42,9 +41,11 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o pci-jmr3927.o
-obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o ops-tx4927.o
-obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
+obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o
+obj-$(CONFIG_SOC_TX4927)	+= pci-tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= pci-tx4938.o
+obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
deleted file mode 100644
index 506e883a8c71..000000000000
--- a/arch/mips/pci/fixup-atlas.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
- *	Author:	 Maciej W. Rozycki <macro@mips.com>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mips-boards/atlasint.h>
-
-#define PCIA		ATLAS_INT_PCIA
-#define PCIB		ATLAS_INT_PCIB
-#define PCIC		ATLAS_INT_PCIC
-#define PCID		ATLAS_INT_PCID
-#define INTA		ATLAS_INT_INTA
-#define INTB		ATLAS_INT_INTB
-#define ETH		ATLAS_INT_ETH
-#define INTC		ATLAS_INT_INTC
-#define SCSI		ATLAS_INT_SCSI
-#define INTD		ATLAS_INT_INTD
-
-static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
-	{0,	0,	0,	0,	0 },	/*  0: Unused */
-	{0,	0,	0,	0,	0 },	/*  1: Unused */
-	{0,	0,	0,	0,	0 },	/*  2: Unused */
-	{0,	0,	0,	0,	0 },	/*  3: Unused */
-	{0,	0,	0,	0,	0 },	/*  4: Unused */
-	{0,	0,	0,	0,	0 },	/*  5: Unused */
-	{0,	0,	0,	0,	0 },	/*  6: Unused */
-	{0,	0,	0,	0,	0 },	/*  7: Unused */
-	{0,	0,	0,	0,	0 },	/*  8: Unused */
-	{0,	0,	0,	0,	0 },	/*  9: Unused */
-	{0,	0,	0,	0,	0 },	/* 10: Unused */
-	{0,	0,	0,	0,	0 },	/* 11: Unused */
-	{0,	0,	0,	0,	0 },	/* 12: Unused */
-	{0,	0,	0,	0,	0 },	/* 13: Unused */
-	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
-	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
-	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
-	{0,	0,	0,	0,	0 },	/* 20: Unused */
-	{0,	0,	0,	0,	0 }	/* 21: Unused */
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-#ifdef CONFIG_KGDB
-/*
- * The PCI scan may have moved the saa9730 I/O address, so reread
- * the address here.
- * This does mean that it's not possible to debug the PCI bus configuration
- * code, but it is better than nothing...
- */
-
-static void atlas_saa9730_base_fixup(struct pci_dev *pdev)
-{
-	extern void *saa9730_base;
-	if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19)
-		(void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base);
-	printk("saa9730_base = %x\n", saa9730_base);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
-	 atlas_saa9730_base_fixup);
-
-#endif
diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c
index e974394be7bc..0f1069527cba 100644
--- a/arch/mips/pci/fixup-jmr3927.c
+++ b/arch/mips/pci/fixup-jmr3927.c
@@ -28,36 +28,31 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
 
-#include <asm/jmr3927/jmr3927.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
-	if (dev->vendor == PCI_VENDOR_ID_EFAR &&
-	    dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1)
-		return irq;
 	/* IRQ rotation (PICMG) */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+	if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
 		/* PCI CardSlot (IDSEL=A23, DevNu=12) */
 		/* PCIA => PCIC (IDSEL=A23) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 2) % 4;
-	} else if (dev->bus->parent == NULL &&
-		   slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
+	} else if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
 		/* PCI CardSlot (IDSEL=A22, DevNu=11) */
 		/* PCIA => PCIA (IDSEL=A22) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 0) % 4;
 	} else {
 		/* PCI Backplane */
-		irq = (irq + 3 + slot) % 4;
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
 	irq++;			/* 1-4 */
 
@@ -66,15 +61,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_IOC_PCIA;
 		break;
 	case 2:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCIB;
-		irq = JMR3927_IRQ_IOC_PCID;
+		irq = JMR3927_IRQ_IOC_PCIB;
 		break;
 	case 3:
 		irq = JMR3927_IRQ_IOC_PCIC;
 		break;
 	case 4:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCID;
-		irq = JMR3927_IRQ_IOC_PCIB;
+		irq = JMR3927_IRQ_IOC_PCID;
 		break;
 	}
 
@@ -84,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_ETHER0;
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c
index 7450c335b387..321db265829c 100644
--- a/arch/mips/pci/fixup-rbtx4927.c
+++ b/arch/mips/pci/fixup-rbtx4927.c
@@ -33,108 +33,41 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
 
-#include <asm/tx4927/tx4927.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-#undef  DEBUG
-#ifdef  DEBUG
-#define DBG(x...)       printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* look up table for backplane pci irq for slots 17-20 by pin # */
-static unsigned char backplane_pci_irq[4][4] = {
-	/* PJ6 SLOT:  17, PIN: 1 */ {TX4927_IRQ_IOC_PCIA,
-				     /* PJ6 SLOT:  17, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ6 SLOT:  17, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* PJ6 SLOT:  17, PIN: 4 */
-				     TX4927_IRQ_IOC_PCID},
-	/* SB  SLOT:  18, PIN: 1 */ {TX4927_IRQ_IOC_PCIB,
-				     /* SB  SLOT:  18, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* SB  SLOT:  18, PIN: 3 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* SB  SLOT:  18, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIA},
-	/* PJ5 SLOT:  19, PIN: 1 */ {TX4927_IRQ_IOC_PCIC,
-				     /* PJ5 SLOT:  19, PIN: 2 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* PJ5 SLOT:  19, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ5 SLOT:  19, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIB},
-	/* PJ4 SLOT:  20, PIN: 1 */ {TX4927_IRQ_IOC_PCID,
-				     /* PJ4 SLOT:  20, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ4 SLOT:  20, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ4 SLOT:  20, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIC}
-};
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
+int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	DBG("pci_get_irq: pin is %d\n", pin);
 	/* IRQ rotation */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    PCI_SLOT(dev->devfn) == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
-		printk("Onboard PCI_SLOT(dev->devfn) is %d\n",
-		       PCI_SLOT(dev->devfn));
-		/* IDSEL=A23 is tx4927 onboard pci slot */
-		irq = (irq + PCI_SLOT(dev->devfn)) % 4;
-		irq++;		/* 1-4 */
-		DBG("irq is now %d\n", irq);
-
-		switch (irq) {
-		case 1:
-			irq = TX4927_IRQ_IOC_PCIA;
-			break;
-		case 2:
-			irq = TX4927_IRQ_IOC_PCIB;
-			break;
-		case 3:
-			irq = TX4927_IRQ_IOC_PCIC;
-			break;
-		case 4:
-			irq = TX4927_IRQ_IOC_PCID;
-			break;
-		}
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA */
+		irq = (irq + 0 + slot) % 4;
 	} else {
 		/* PCI Backplane */
-		DBG("PCI Backplane PCI_SLOT(dev->devfn) is %d\n",
-		    PCI_SLOT(dev->devfn));
-		irq = backplane_pci_irq[PCI_SLOT(dev->devfn) - 17][irq];
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
-	DBG("assigned irq %d\n", irq);
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq;
-
-	printk("PCI Setup for pin %d \n", pin);
-
-	if (dev->device == 0x9130) /* IDE */
-		irq = 14;
-	else
-		irq = pci_get_irq(dev, pin);
+	irq++;	/* 1-4 */
 
+	switch (irq) {
+	case 1:
+		irq = RBTX4927_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4927_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4927_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4927_IRQ_IOC_PCID;
+		break;
+	}
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c
new file mode 100644
index 000000000000..a80579af609b
--- /dev/null
+++ b/arch/mips/pci/fixup-rbtx4938.c
@@ -0,0 +1,53 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+
+int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = tx4938_pcic1_map_irq(dev, slot);
+
+	if (irq >= 0)
+		return irq;
+	irq = pin;
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA (IDSEL=A23) */
+		irq = (irq + 0 + slot) % 4;
+	} else {
+		/* PCI Backplane */
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
+	}
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = RBTX4938_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4938_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4938_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4938_IRQ_IOC_PCID;
+		break;
+	}
+	return irq;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
deleted file mode 100644
index f2ba06ee0c10..000000000000
--- a/arch/mips/pci/fixup-tx4938.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Toshiba rbtx4938 pci routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/tx4938/rbtx4938.h>
-
-extern struct pci_controller tx4938_pci_controller[];
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
-{
-	int irq = pin;
-	u8 slot = PCI_SLOT(dev->devfn);
-	struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
-
-	if (controller == &tx4938_pci_controller[1]) {
-		/* TX4938 PCIC1 */
-		switch (slot) {
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
-			break;
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
-			break;
-		}
-		return 0;
-	}
-
-	/* IRQ rotation */
-	irq--;	/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
-		/* PCI CardSlot (IDSEL=A23) */
-		/* PCIA => PCIA (IDSEL=A23) */
-		irq = (irq + 0 + slot) % 4;
-	} else {
-		/* PCI Backplane */
-		irq = (irq + 33 - slot) % 4;
-	}
-	irq++;	/* 1-4 */
-
-	switch (irq) {
-	case 1:
-		irq = RBTX4938_IRQ_IOC_PCIA;
-		break;
-	case 2:
-		irq = RBTX4938_IRQ_IOC_PCIB;
-		break;
-	case 3:
-		irq = RBTX4938_IRQ_IOC_PCIC;
-		break;
-	case 4:
-		irq = RBTX4938_IRQ_IOC_PCID;
-		break;
-	}
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq = 0;
-
-	irq = pci_get_irq(dev, pin);
-
-	printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
-	       dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
-	       PCI_FUNC(dev->devfn), irq);
-
-	return irq;
-}
-
-/*
- * Do platform specific device initialization at pci_enable_device() time
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c
deleted file mode 100644
index de5e5f6bbf4c..000000000000
--- a/arch/mips/pci/fixup-vr4133.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/mips/pci/fixup-vr4133.c
- *
- * The NEC CMB-VR4133 Board specific PCI fixups.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Modified for support in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-extern void ali_m1535plus_init(struct pci_dev *dev);
-extern void ali_m5229_init(struct pci_dev *dev);
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	/*
-	 * We have to reset AMD PCnet adapter on Rockhopper since
-	 * PMON leaves it enabled and generating interrupts. This leads
-	 * to a lock if some PCI device driver later enables the IRQ line
-	 * shared with PCnet and there is no AMD PCnet driver to catch its
-	 * interrupts.
-	 */
-#ifdef CONFIG_ROCKHOPPER
-	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-		dev->device == PCI_DEVICE_ID_AMD_LANCE) {
-		inl(pci_resource_start(dev, 0) + 0x18);
-	}
-#endif
-
-	/*
-	 * we have to open the bridges' windows down to 0 because otherwise
-	 * we cannot access ISA south bridge I/O registers that get mapped from
-	 * 0. for example, 8259 PIC would be unaccessible without that
-	 */
-	if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) {
-		pci_write_config_byte(dev, PCI_IO_BASE, 0);
-		if(dev->bus->number == 0) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
-		} else {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * M1535 IRQ mapping
- * Feel free to change this, although it shouldn't be needed
- */
-#define M1535_IRQ_INTA  7
-#define M1535_IRQ_INTB  9
-#define M1535_IRQ_INTC  10
-#define M1535_IRQ_INTD  11
-
-#define M1535_IRQ_USB   9
-#define M1535_IRQ_IDE   14
-#define M1535_IRQ_IDE2  15
-#define M1535_IRQ_PS2   12
-#define M1535_IRQ_RTC   8
-#define M1535_IRQ_FDC   6
-#define M1535_IRQ_AUDIO 5
-#define M1535_IRQ_COM1  4
-#define M1535_IRQ_COM2  4
-#define M1535_IRQ_IRDA  3
-#define M1535_IRQ_KBD   1
-#define M1535_IRQ_TMR   0
-
-/* Rockhopper "slots" assignment; this is hard-coded ... */
-#define ROCKHOPPER_M5451_SLOT  1
-#define ROCKHOPPER_M1535_SLOT  2
-#define ROCKHOPPER_M5229_SLOT  11
-#define ROCKHOPPER_M5237_SLOT  15
-#define ROCKHOPPER_PMU_SLOT    12
-/* ... and hard-wired. */
-#define ROCKHOPPER_PCI1_SLOT   3
-#define ROCKHOPPER_PCI2_SLOT   4
-#define ROCKHOPPER_PCI3_SLOT   5
-#define ROCKHOPPER_PCI4_SLOT   6
-#define ROCKHOPPER_PCNET_SLOT  1
-
-#define M1535_IRQ_MASK(n) (1 << (n))
-
-#define M1535_IRQ_EDGE  (M1535_IRQ_MASK(M1535_IRQ_TMR)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_KBD)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM1) | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM2) | \
-                         M1535_IRQ_MASK(M1535_IRQ_IRDA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_RTC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_FDC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_PS2))
-
-#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_USB)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTB) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTC) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTD))
-
-struct irq_map_entry {
-	u16 bus;
-	u8 slot;
-	u8 irq;
-};
-static struct irq_map_entry int_map[] = {
-	{1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO},	/* Audio controller */
-	{1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD},	/* PCI slot #1 */
-	{1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC},	/* PCI slot #2 */
-	{1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB},	/* USB host controller */
-	{1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ},	/* IDE controller */
-	{2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD},	/* AMD Am79c973 on-board
-							   ethernet */
-	{2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB},	/* PCI slot #3 */
-	{2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC}	/* PCI slot #4 */
-};
-
-static int pci_intlines[] =
-    { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD };
-
-/* Determine the Rockhopper IRQ line number for the PCI device */
-int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot)
-{
-	struct pci_bus *bus;
-	int i;
-
-	bus = dev->bus;
-	if (bus == NULL)
-		return -1;
-
-	for (i = 0; i < ARRAY_SIZE(int_map); i++) {
-		if (int_map[i].bus == bus->number && int_map[i].slot == slot) {
-			int line;
-			for (line = 0; line < 4; line++)
-				if (pci_intlines[line] == int_map[i].irq)
-					break;
-			if (line < 4)
-				return pci_intlines[(line + (pin - 1)) % 4];
-			else
-				return int_map[i].irq;
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_ROCKHOPPER
-void i8259_init(void)
-{
-	init_i8259_irqs();
-
-	outb(0x00, 0x4d0);
-	outb(0x02, 0x4d1);	/* USB IRQ9 is level */
-}
-#endif
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	extern int pci_probe_only;
-	pci_probe_only = 1;
-
-#ifdef CONFIG_ROCKHOPPER
-	if( dev->bus->number == 1 && vr4133_rockhopper )  {
-		if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT)
-			dev->irq = CMBVR41XX_INTA_IRQ;
-		else
-			dev->irq = rockhopper_get_irq(dev, pin, slot);
-	} else
-		dev->irq = CMBVR41XX_INTA_IRQ;
-#else
-	dev->irq = CMBVR41XX_INTA_IRQ;
-#endif
-
-	return dev->irq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init);
-
-
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index e95881897ec9..1cfb5588699f 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -61,6 +61,13 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	/* ack possible master abort */
 	mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
 	mace->pci.control = control;
+	/*
+	 * someone forgot to set the ultra bit for the onboard
+	 * scsi chips; we fake it here
+	 */
+	if (bus->number == 0 && reg == 0x40 && size == 4 &&
+	    (devfn == (1 << 3) || devfn == (2 << 3)))
+		*val |= 0x1000;
 
 	DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);
 
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index aa698bd0d5e3..8a17a39e5bf2 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -8,7 +8,7 @@
  *
  * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
  *
- *     Define the pci_ops for JMR3927.
+ *     Define the pci_ops for TX3927.
  *
  * Much of the code is derived from the original DDB5074 port by
  * Geert Uytterhoeven <geert@sonycom.com>
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 
 #include <asm/addrspace.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/tx3927.h>
 
 static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
 	unsigned char where)
@@ -68,7 +68,7 @@ static inline int check_abort(void)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
 	int ret;
@@ -94,7 +94,7 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	return check_abort();
 }
 
-static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
 	int ret;
@@ -125,7 +125,80 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	return check_abort();
 }
 
-struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pci_read_config,
-	jmr3927_pci_write_config,
+static struct pci_ops tx3927_pci_ops = {
+	.read = tx3927_pci_read_config,
+	.write = tx3927_pci_write_config,
 };
+
+void __init tx3927_pcic_setup(struct pci_controller *channel,
+			      unsigned long sdram_size, int extarb)
+{
+	unsigned long flags;
+	unsigned long io_base =
+		channel->io_resource->start + mips_io_port_base - IO_BASE;
+	unsigned long io_size =
+		channel->io_resource->end - channel->io_resource->start;
+	unsigned long io_pciaddr =
+		channel->io_resource->start - channel->io_offset;
+	unsigned long mem_base =
+		channel->mem_resource->start;
+	unsigned long mem_size =
+		channel->mem_resource->end - channel->mem_resource->start;
+	unsigned long mem_pciaddr =
+		channel->mem_resource->start - channel->mem_offset;
+
+	printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s",
+	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
+	       tx3927_pcicptr->rid,
+	       extarb ? "External" : "Internal");
+	channel->pci_ops = &tx3927_pci_ops;
+
+	local_irq_save(flags);
+	/* Disable External PCI Config. Access */
+	tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
+#ifdef __BIG_ENDIAN
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
+		TX3927_PCIC_LBC_TIBSE |
+		TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
+#endif
+	/* LB->PCI mappings */
+	tx3927_pcicptr->iomas = ~(io_size - 1);
+	tx3927_pcicptr->ilbioma = io_base;
+	tx3927_pcicptr->ipbioma = io_pciaddr;
+	tx3927_pcicptr->mmas = ~(mem_size - 1);
+	tx3927_pcicptr->ilbmma = mem_base;
+	tx3927_pcicptr->ipbmma = mem_pciaddr;
+	/* PCI->LB mappings */
+	tx3927_pcicptr->iobas = 0xffffffff;
+	tx3927_pcicptr->ioba = 0;
+	tx3927_pcicptr->tlbioma = 0;
+	tx3927_pcicptr->mbas = ~(sdram_size - 1);
+	tx3927_pcicptr->mba = 0;
+	tx3927_pcicptr->tlbmma = 0;
+	/* Enable Direct mapping Address Space Decoder */
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
+
+	/* Clear All Local Bus Status */
+	tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+	/* Enable All Local Bus Interrupts */
+	tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
+	/* Clear All PCI Status Error */
+	tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
+	/* Enable All PCI Status Error Interrupts */
+	tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
+
+	/* PCIC Int => IRC IRQ10 */
+	tx3927_pcicptr->il = TX3927_IR_PCI;
+	/* Target Control (per errata) */
+	tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
+
+	/* Enable Bus Arbiter */
+	if (!extarb)
+		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
+
+	tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_IO |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 150419c8b414..c6b49bccd274 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -1,209 +1,408 @@
 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
+ * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc.
  *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
- *
- *     Define the pci_ops for the Toshiba rbtx4927
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Based on linux/arch/mips/pci/ops-tx4938.c,
+ *          linux/arch/mips/pci/fixup-rbtx4938.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
-#include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "TX4927 PCI IO SPACE",
-	.start	= 0x1000,
-	.end	= (0x1000 + (TX4927_PCIIO_SIZE)) - 1,
-	.flags	= IORESOURCE_IO
-};
+#include <asm/txx9/tx4927pcic.h>
 
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "TX4927 PCI MEM SPACE",
-	.start	= TX4927_PCIMEM,
-	.end	= TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
+static struct {
+	struct pci_controller *channel;
+	struct tx4927_pcic_reg __iomem *pcicptr;
+} pcicptrs[2];	/* TX4938 has 2 pcic */
+
+static void __init set_tx4927_pcicptr(struct pci_controller *channel,
+				      struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel) {
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (!pcicptrs[i].channel) {
+			pcicptrs[i].channel = channel;
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	BUG();
+}
 
-static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+	struct pci_controller *channel)
 {
-	if (bus > 0) {
-		/* Type 1 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
-			return -1;
+	int i;
 
-		/* Type 0 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel)
+			return pcicptrs[i].pcicptr;
 	}
+	return NULL;
+}
+
+static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where,
+		  struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	__raw_writel(((bus->number & 0xff) << 0x10)
+		     | ((devfn & 0xff) << 0x08) | (where & 0xfc)
+		     | (bus->parent ? 1 : 0),
+		     &pcicptr->g2pcfgadrs);
 	/* clear M_ABORT and Disable M_ABORT Int. */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+		     &pcicptr->pcistatus);
 	return 0;
 }
 
-static int check_abort(int flags)
+static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 {
 	int code = PCIBIOS_SUCCESSFUL;
-	if (tx4927_pcicptr->
-	    pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		tx4927_pcicptr->pcistatus =
-		    (tx4927_pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+
+	/* wait write cycle completion before checking error status */
+	while (__raw_readl(&pcicptr->pcicstatus) & TX4927_PCIC_PCICSTATUS_IWB)
+		;
+	if (__raw_readl(&pcicptr->pcistatus)
+	    & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+			     &pcicptr->pcistatus);
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
 }
 
-static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 * val)
+static u8 icd_readb(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	return __raw_readb((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u16 icd_readw(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	return __raw_readw((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u32 icd_readl(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	return __raw_readl(&pcicptr->g2pcfgdata);
+}
+static void icd_writeb(u8 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	__raw_writeb(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writew(u16 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	__raw_writew(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writel(u32 val, struct tx4927_pcic_reg __iomem *pcicptr)
 {
-	int flags, retval, dev, busno, func;
+	__raw_writel(val, &pcicptr->g2pcfgdata);
+}
 
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+static struct tx4927_pcic_reg __iomem *pci_bus_to_pcicptr(struct pci_bus *bus)
+{
+	struct pci_controller *channel = bus->sysdata;
+	return get_tx4927_pcicptr(channel);
+}
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
+static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
-	if (mkaddr(busno, devfn, where, &flags))
+	if (mkaddr(bus, devfn, where, pcicptr)) {
+		*val = 0xffffffff;
 		return -1;
-
+	}
 	switch (size) {
 	case 1:
-		*val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                              g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x3));
-#endif
+		*val = icd_readb(where & 3, pcicptr);
 		break;
 	case 2:
-		*val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                               g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x2));
-#endif
-		break;
-	case 4:
-		*val = tx4927_pcicptr->g2pcfgdata;
+		*val = icd_readw(where & 3, pcicptr);
 		break;
+	default:
+		*val = icd_readl(pcicptr);
 	}
+	return check_abort(pcicptr);
+}
 
-	retval = check_abort(flags);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
+static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
-	return retval;
+	if (mkaddr(bus, devfn, where, pcicptr))
+		return -1;
+	switch (size) {
+	case 1:
+		icd_writeb(val, where & 3, pcicptr);
+		break;
+	case 2:
+		icd_writew(val, where & 3, pcicptr);
+		break;
+	default:
+		icd_writel(val, pcicptr);
+	}
+	return check_abort(pcicptr);
 }
 
-static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 val)
+static struct pci_ops tx4927_pci_ops = {
+	.read = tx4927_pci_config_read,
+	.write = tx4927_pci_config_write,
+};
+
+static struct {
+	u8 trdyto;
+	u8 retryto;
+	u16 gbwc;
+} tx4927_pci_opts __devinitdata = {
+	.trdyto = 0,
+	.retryto = 0,
+	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
+};
+
+void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+			      struct pci_controller *channel, int extarb)
 {
-	int flags, dev, busno, func;
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+	int i;
+	unsigned long flags;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
+	set_tx4927_pcicptr(channel, pcicptr);
 
-	if (mkaddr(busno, devfn, where, &flags))
-		return -1;
+	if (!channel->pci_ops)
+		printk(KERN_INFO
+		       "PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+		       __raw_readl(&pcicptr->pciid) >> 16,
+		       __raw_readl(&pcicptr->pciid) & 0xffff,
+		       __raw_readl(&pcicptr->pciccrev) & 0xff,
+			extarb ? "External" : "Internal");
+	channel->pci_ops = &tx4927_pci_ops;
 
-	switch (size) {
-	case 1:
-		 *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                          g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+	local_irq_save(flags);
+
+	/* Disable All Initiator Space */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     & ~(TX4927_PCIC_PCICCFG_G2PMEN(0)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(1)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(2)
+			 | TX4927_PCIC_PCICCFG_G2PIOEN),
+		     &pcicptr->pciccfg);
+
+	/* GB->PCI mappings */
+	__raw_writel((channel->io_resource->end - channel->io_resource->start)
+		     >> 4,
+		     &pcicptr->g2piomask);
+	____raw_writeq((channel->io_resource->start +
+			channel->io_map_base - IO_BASE) |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_G2PIOGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x3)) = val;
+		       TX4927_PCIC_G2PIOGBASE_BSDIS
 #endif
-		break;
-
-	case 2:
-		*(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                           g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+		       , &pcicptr->g2piogbase);
+	____raw_writeq(channel->io_resource->start - channel->io_offset,
+		       &pcicptr->g2piopbase);
+	for (i = 0; i < 3; i++) {
+		__raw_writel(0, &pcicptr->g2pmmask[i]);
+		____raw_writeq(0, &pcicptr->g2pmgbase[i]);
+		____raw_writeq(0, &pcicptr->g2pmpbase[i]);
+	}
+	if (channel->mem_resource->end) {
+		__raw_writel((channel->mem_resource->end
+			      - channel->mem_resource->start) >> 4,
+			     &pcicptr->g2pmmask[0]);
+		____raw_writeq(channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			       TX4927_PCIC_G2PMnGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x2)) = val;
+			       TX4927_PCIC_G2PMnGBASE_BSDIS
 #endif
-		break;
-	case 4:
-		tx4927_pcicptr->g2pcfgdata = val;
-		break;
+			       , &pcicptr->g2pmgbase[0]);
+		____raw_writeq(channel->mem_resource->start -
+			       channel->mem_offset,
+			       &pcicptr->g2pmpbase[0]);
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	__raw_writel(0, &pcicptr->p2giopbase); /* 256B */
+	____raw_writeq(0, &pcicptr->p2giogbase);
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	__raw_writel(0, &pcicptr->p2gm0plbase);
+	__raw_writel(0, &pcicptr->p2gm0pubase);
+	____raw_writeq(TX4927_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_P2GMnGBASE_TECHG
+#else
+		       TX4927_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		       , &pcicptr->p2gmgbase[0]);
+	/* PCI->GB mappings (MEM 16MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm1plbase);
+	__raw_writel(0xffffffff, &pcicptr->p2gm1pubase);
+	____raw_writeq(0, &pcicptr->p2gmgbase[1]);
+	/* PCI->GB mappings (MEM 1MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm2pbase); /* 1MB */
+	____raw_writeq(0, &pcicptr->p2gmgbase[2]);
+
+	/* Clear all (including IRBER) except for GBWC */
+	__raw_writel((tx4927_pci_opts.gbwc << 16)
+		     & TX4927_PCIC_PCICCFG_GBWC_MASK,
+		     &pcicptr->pciccfg);
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PMEN(0),
+			     &pcicptr->pciccfg);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PIOEN,
+			     &pcicptr->pciccfg);
+	/* Enable Initiator Config */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     | TX4927_PCIC_PCICCFG_ICAEN | TX4927_PCIC_PCICCFG_TCAR,
+		     &pcicptr->pciccfg);
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	__raw_writel(0, &pcicptr->pcicfg1);
+
+	__raw_writel((__raw_readl(&pcicptr->g2ptocnt) & ~0xffff)
+		     | (tx4927_pci_opts.trdyto & 0xff)
+		     | ((tx4927_pci_opts.retryto & 0xff) << 8),
+		     &pcicptr->g2ptocnt);
+
+	/* Clear All Local Bus Status */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+	/* Enable All Local Bus Interrupts */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicmask);
+	/* Clear All Initiator Status */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+	/* Enable All Initiator Interrupts */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pmask);
+	/* Clear All PCI Status Error */
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+		     &pcicptr->pcistatus);
+	/* Enable All PCI Status Error Interrupts */
+	__raw_writel(TX4927_PCIC_PCISTATUS_ALL, &pcicptr->pcimask);
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_PBAEN, &pcicptr->pbacfg);
 	}
 
-	return check_abort(flags);
+	__raw_writel(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+		     | PCI_COMMAND_PARITY | PCI_COMMAND_SERR,
+		     &pcicptr->pcistatus);
+	local_irq_restore(flags);
+
+	printk(KERN_DEBUG
+	       "PCI: COMMAND=%04x,PCIMASK=%04x,"
+	       "TRDYTO=%02x,RETRYTO=%02x,GBWC=%03x\n",
+	       __raw_readl(&pcicptr->pcistatus) & 0xffff,
+	       __raw_readl(&pcicptr->pcimask) & 0xffff,
+	       __raw_readl(&pcicptr->g2ptocnt) & 0xff,
+	       (__raw_readl(&pcicptr->g2ptocnt) & 0xff00) >> 8,
+	       (__raw_readl(&pcicptr->pciccfg) >> 16) & 0xfff);
 }
 
-struct pci_ops tx4927_pci_ops = {
-	tx4927_pcibios_read_config,
-	tx4927_pcibios_write_config
-};
+static void tx4927_report_pcic_status1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	__u16 pcistatus = (__u16)(__raw_readl(&pcicptr->pcistatus) >> 16);
+	__u32 g2pstatus = __raw_readl(&pcicptr->g2pstatus);
+	__u32 pcicstatus = __raw_readl(&pcicptr->pcicstatus);
+	static struct {
+		__u32 flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4927_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4927_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4927_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4927_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4927_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4927_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4927_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4927_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4927_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4927_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i, cont;
 
-/*
- * h/w only supports devices 0x00 to 0x14
- */
-struct pci_controller tx4927_controller = {
-	.pci_ops        = &tx4927_pci_ops,
-	.io_resource    = &pci_io_resource,
-	.mem_resource   = &pci_mem_resource,
-};
+	printk(KERN_ERR "");
+	if (pcistatus & TX4927_PCIC_PCISTATUS_ALL) {
+		printk(KERN_CONT "pcistat:%04x(", pcistatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+			if (pcistatus & pcistat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcistat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (g2pstatus & TX4927_PCIC_G2PSTATUS_ALL) {
+		printk(KERN_CONT "g2pstatus:%08x(", g2pstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+			if (g2pstatus & g2pstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", g2pstat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (pcicstatus & TX4927_PCIC_PCICSTATUS_ALL) {
+		printk(KERN_CONT "pcicstatus:%08x(", pcicstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+			if (pcicstatus & pcicstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcicstat_tbl[i].str);
+		printk(KERN_CONT ")");
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_report_pcic_status(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
+	}
+}
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
deleted file mode 100644
index a450c4062031..000000000000
--- a/arch/mips/pci/ops-tx4938.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Define the pci_ops for the Toshiba rbtx4938
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/tx4938/rbtx4938.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "pci IO space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "pci memory space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-struct resource tx4938_pcic1_pci_io_resource = {
-	.name	= "PCI1 IO",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-struct resource tx4938_pcic1_pci_mem_resource = {
-	.name	= "PCI1 mem",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-static int mkaddr(int bus, int dev_fn, int where,
-		  struct tx4938_pcic_reg *pcicptr)
-{
-	if (bus > 0) {
-		/* Type 1 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
-			return -1;
-
-		/* Type 0 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
-	}
-	/* clear M_ABORT and Disable M_ABORT Int. */
-	pcicptr->pcistatus =
-	    (pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return 0;
-}
-
-static int check_abort(struct tx4938_pcic_reg *pcicptr)
-{
-	int code = PCIBIOS_SUCCESSFUL;
-	/* wait write cycle completion before checking error status */
-	while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
-				;
-	if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		pcicptr->pcistatus =
-		    (pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
-		code = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	return code;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch);
-
-static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus)
-{
-	struct pci_controller *channel = bus->sysdata;
-	return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]);
-}
-
-static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 * val)
-{
-	int retval, dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-	else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		*val = __raw_readb(cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		*val = __raw_readw(cfgdata);
-		break;
-	case 4:
-		*val = __raw_readl(cfgdata);
-		break;
-	}
-
-	retval = check_abort(pcicptr);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
-
-	return retval;
-}
-
-static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-						int size, u32 val)
-{
-	int dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		__raw_writeb(val, cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		__raw_writew(val, cfgdata);
-		break;
-	case 4:
-		__raw_writel(val, cfgdata);
-		break;
-	}
-
-	return check_abort(pcicptr);
-}
-
-struct pci_ops tx4938_pci_ops = {
-	tx4938_pcibios_read_config,
-	tx4938_pcibios_write_config
-};
-
-struct pci_controller tx4938_pci_controller[] = {
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &pci_io_resource,
-		.mem_resource   = &pci_mem_resource,
-	},
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &tx4938_pcic1_pci_io_resource,
-		.mem_resource   = &tx4938_pcic1_pci_mem_resource,
-        }
-};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 87e2c8f54e2d..a9060c771840 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -202,7 +202,6 @@ static int __init bcm1480_pcibios_init(void)
 {
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,8 +253,6 @@ static int __init bcm1480_pcibios_init(void)
 		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
 	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
 	set_io_port_base(bcm1480_controller.io_map_base);
-	isa_slot_offset = (unsigned long)
-		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
 
 	register_pci_controller(&bcm1480_controller);
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index a18516925cdd..ce92f82b16d2 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,7 +47,6 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
 	static int num_bridges = 0;
 	bridge_t *bridge;
 	int slot;
-	extern int pci_probe_only;
 
 	pci_probe_only = 1;
 
diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c
deleted file mode 100644
index cb84f4e8ccae..000000000000
--- a/arch/mips/pci/pci-jmr3927.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/jmr3927/jmr3927.h>
-#include <asm/debug.h>
-
-struct resource pci_io_resource = {
-	.name	= "IO MEM",
-	.start	= 0x1000,			/* reserve regacy I/O space */
-	.end	= 0x1000 + JMR3927_PCIIO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-struct resource pci_mem_resource = {
-	.name	= "PCI MEM",
-	.start	= JMR3927_PCIMEM,
-	.end	= JMR3927_PCIMEM + JMR3927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops jmr3927_pci_ops;
-
-struct pci_controller jmr3927_controller = {
-	.pci_ops	= &jmr3927_pci_ops,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM
-};
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index e70ae3236e0b..a98e543a514a 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -10,7 +10,7 @@
 #include <linux/pci.h>
 #include <linux/types.h>
 
-#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
 
 #include <irq.h>
 
@@ -39,16 +39,10 @@ static int __init lasat_pci_setup(void)
 {
 	printk(KERN_DEBUG "PCI: starting\n");
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200())
 		lasat_pci_controller.pci_ops = &nile4_pci_ops;
-		break;
-	default:
-		panic("pcibios_init: mips_machtype incorrect");
-	}
+	else
+		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
 
 	register_pci_controller(&lasat_pci_controller);
 
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 2a09ad91ec8c..bf639590b8b2 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -210,7 +210,6 @@ static int __init sb1250_pcibios_init(void)
 	void __iomem *io_map_base;
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,9 +253,6 @@ static int __init sb1250_pcibios_init(void)
 	 * works correctly with most of Linux's drivers.
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
-	isa_slot_offset = (unsigned long)
-	    ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
-
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
 	sb1250_controller.io_map_base = io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
new file mode 100644
index 000000000000..27e86a09dd41
--- /dev/null
+++ b/arch/mips/pci/pci-tx4927.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/mips/pci/pci-tx4927.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+int __init tx4927_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK) {
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pciclk = txx9_cpu_clock * 2 / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_3:
+			pciclk = txx9_cpu_clock / 3; break;
+		case TX4927_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+			pciclk = txx9_cpu_clock / 6; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+int __init tx4927_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4927_ccfg_set(TX4927_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4927_CCFG_PCIDIVMODE_5:
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_2_5;
+			pciclk = txx9_cpu_clock * 2 / 5;
+			break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+		case TX4927_CCFG_PCIDIVMODE_3:
+		default:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_3;
+			pciclk = txx9_cpu_clock / 3;
+		}
+		tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
new file mode 100644
index 000000000000..e5375511c2b7
--- /dev/null
+++ b/arch/mips/pci/pci-tx4938.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/mips/pci/pci-tx4938.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+int __init tx4938_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init tx4938_report_pci1clk(void)
+{
+	__u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+	unsigned int pciclk =
+		txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2);
+
+	printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n",
+	       (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "",
+	       (pciclk + 50000) / 1000000,
+	       ((pciclk + 50000) / 100000) % 10);
+}
+
+int __init tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfg_set(TX4938_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
+
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+{
+	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
+		switch (slot) {
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH0_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH0;
+			break;
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH1_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH1;
+			break;
+		}
+		return 0;
+	}
+	return -1;
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 358ad6210949..d7d6cb063d26 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -29,8 +29,7 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
  * The PCI controller list.
  */
 
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
+static struct pci_controller *hose_head, **hose_tail = &hose_head;
 
 unsigned long PCIBIOS_MIN_IO	= 0x0000;
 unsigned long PCIBIOS_MIN_MEM	= 0;
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 6380662bbf3c..678388fd34b1 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
         return pcibios_enable_resources(dev);
 }
 
-
-
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-                             struct resource *res, int resource)
-{
-        u32 new, check;
-        int reg;
-
-        return;
-
-        new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-        if (resource < 6) {
-                reg = PCI_BASE_ADDRESS_0 + 4 * resource;
-        } else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-                reg = dev->rom_base_reg;
-        } else {
-                /*
-                 * Somebody might have asked allocation of a non-standard
-                 * resource
-                 */
-                return;
-        }
-
-        pci_write_config_dword(dev, reg, new);
-        pci_read_config_dword(dev, reg, &check);
-        if ((new ^ check) &
-            ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
-             PCI_BASE_ADDRESS_MEM_MASK)) {
-                printk(KERN_ERR "PCI: Error while updating region "
-                       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-                       new, check);
-        }
-}
-
-
 void pcibios_align_resource(void *data, struct resource *res,
                             resource_size_t size, resource_size_t align)
 {
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 3f35d6367bec..5268ac187bbd 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -208,4 +208,30 @@ void __init sgimc_init(void)
 void __init prom_meminit(void) {}
 void __init prom_free_prom_memory(void)
 {
+#ifdef CONFIG_SGI_IP28
+	u32 mconfig1;
+	unsigned long flags;
+	spinlock_t lock;
+
+	/*
+	 * because ARCS accesses memory uncached we wait until ARCS
+	 * isn't needed any longer, before we switch from slow to
+	 * normal mode
+	 */
+	spin_lock_irqsave(&lock, flags);
+	mconfig1 = sgimc->mconfig1;
+	/* map ECC register */
+	sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060;
+	iob();
+	/* switch to normal mode */
+	*(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0;
+	iob();
+	/* reduce WR_COL */
+	sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4;
+	iob();
+	/* restore old config */
+	sgimc->mconfig1 = mconfig1;
+	iob();
+	spin_unlock_irqrestore(&lock, flags);
+#endif
 }
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 28ffec8e5d1a..fc6df96305ed 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -175,3 +175,21 @@ static int __init sgiseeq_devinit(void)
 }
 
 device_initcall(sgiseeq_devinit);
+
+static int __init sgi_hal2_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgihal2", 0, NULL, 0));
+}
+
+device_initcall(sgi_hal2_devinit);
+
+static int __init sgi_button_devinit(void)
+{
+	if (ip22_is_fullhouse())
+		return 0; /* full house has no volume buttons */
+
+	return IS_ERR(platform_device_register_simple("sgiindybtns",
+						      -1, NULL, 0));
+}
+
+device_initcall(sgi_button_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index a435b31cf031..4ad5c3393fd3 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -39,7 +39,7 @@
 #define POWERDOWN_FREQ		(HZ / 4)
 #define PANIC_FREQ		(HZ / 8)
 
-static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer;
+static struct timer_list power_timer, blink_timer, debounce_timer;
 
 #define MACHINE_PANICED		1
 #define MACHINE_SHUTTING_DOWN	2
@@ -139,36 +139,6 @@ static inline void power_button(void)
 	add_timer(&power_timer);
 }
 
-void (*indy_volume_button)(int) = NULL;
-
-EXPORT_SYMBOL(indy_volume_button);
-
-static inline void volume_up_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
-static inline void volume_down_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(-1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
 static irqreturn_t panel_int(int irq, void *dev_id)
 {
 	unsigned int buttons;
@@ -190,25 +160,8 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 	 * House. Only lowest 2 bits are used. Guiness uses upper four bits
 	 * for volume control". This is not true, all bits are pulled high
 	 * on fullhouse */
-	if (ip22_is_fullhouse() || !(buttons & SGIOC_PANEL_POWERINTR)) {
+	if (!(buttons & SGIOC_PANEL_POWERINTR))
 		power_button();
-		return IRQ_HANDLED;
-	}
-	/* TODO: mute/unmute */
-	/* Volume up button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLUPINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_up_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-	/* Volume down button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLDNINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_down_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 30e12e2ec4b5..fee7a2e0e538 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -412,7 +412,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
 	 * Now we have an asynchronous bus error, speculatively or DMA caused.
 	 * Need to search all DMA descriptors for the error address.
 	 */
-	for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) {
+	for (i = 0; i < ARRAY_SIZE(hpc3); ++i) {
 		struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
 		if ((cpu_err_stat & CPU_ERRMASK) &&
 		    (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp))
@@ -421,7 +421,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
 		    (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp))
 			break;
 	}
-	if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) {
+	if (i < ARRAY_SIZE(hpc3)) {
 		struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
 		printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:"
 		       " ctl %08x, ndp %08x, cbp %08x\n",
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index b0a25e1ee8b7..64459e7d891b 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -1,4 +1,3 @@
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
@@ -84,13 +83,10 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %016lx ", nr->epc);
-	print_symbol("%s ", nr->epc);
+	printk("epc   : %016lx %pS\n", nr->epc, (void *) nr->epc);
 	printk("%s\n", print_tainted());
-	printk("ErrEPC: %016lx ", nr->error_epc);
-	print_symbol("%s\n", nr->error_epc);
-	printk("ra    : %016lx ", nr->gpr[31]);
-	print_symbol("%s\n", nr->gpr[31]);
+	printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc);
+	printk("ra    : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]);
 	printk("Status: %08lx         ", nr->sr);
 
 	if (nr->sr & ST0_KX)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f49b692..2ee401ba0b25 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,42 @@ static __init int meth_devinit(void)
 
 device_initcall(meth_devinit);
 
+static __init int sgio2audio_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("sgio2audio", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("sgio2btns", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(sgio2btns_devinit);
+
 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 5484e1c62054..a49272ce7ef5 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -116,7 +116,6 @@ void __init plat_mem_setup(void)
 	/*
 	 * Setup (E)ISA I/O memory access stuff
 	 */
-	isa_slot_offset = CKSEG1ADDR(0xb0000000);
 #ifdef CONFIG_EISA
 	EISA_bus = 1;
 #endif
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
deleted file mode 100644
index 5fbbe12e0fc1..000000000000
--- a/arch/mips/tx4927/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-config TOSHIBA_FPCIB0
-	bool "FPCIB0 Backplane Support"
-	depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile
deleted file mode 100644
index a7fe76a64964..000000000000
--- a/arch/mips/tx4927/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= tx4927_prom.o tx4927_irq.o
-
-obj-$(CONFIG_TOSHIBA_FPCIB0)	   += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)                 += tx4927_dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
deleted file mode 100644
index 13f96725d772..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y	+= toshiba_rbtx4927_prom.o
-obj-y	+= toshiba_rbtx4927_setup.o
-obj-y	+= toshiba_rbtx4927_irq.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
deleted file mode 100644
index 6d31f2a98abf..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
- *
- * Toshiba RBTX4927 specific interrupt handlers
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/i8259.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-
-
-#undef TOSHIBA_RBTX4927_IRQ_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_NONE        0x00000000
-
-#define TOSHIBA_RBTX4927_IRQ_INFO          ( 1 <<  0 )
-#define TOSHIBA_RBTX4927_IRQ_WARN          ( 1 <<  1 )
-#define TOSHIBA_RBTX4927_IRQ_EROR          ( 1 <<  2 )
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_INIT      ( 1 << 10 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE    ( 1 << 13 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE   ( 1 << 14 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-static const u32 toshiba_rbtx4927_irq_debug_flag =
-    (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO |
-     TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_INIT
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
-    );
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_irq_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...)
-#endif
-
-
-
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG   0
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END   7
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_BEG  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG)	/* 56 */
-#define TOSHIBA_RBTX4927_IRQ_IOC_END  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END)	/* 63 */
-
-#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC
-#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2)
-
-extern int tx4927_using_backplane;
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
-
-#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
-static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
-	.name = TOSHIBA_RBTX4927_IOC_NAME,
-	.ack = toshiba_rbtx4927_irq_ioc_disable,
-	.mask = toshiba_rbtx4927_irq_ioc_disable,
-	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
-	.unmask = toshiba_rbtx4927_irq_ioc_enable,
-};
-#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
-#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
-
-
-u32 bit2num(u32 num)
-{
-	u32 i;
-
-	for (i = 0; i < (sizeof(num) * 8); i++) {
-		if (num & (1 << i)) {
-			return (i);
-		}
-	}
-	return (0);
-}
-
-int toshiba_rbtx4927_irq_nested(int sw_irq)
-{
-	u32 level3;
-
-	level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-	if (level3) {
-		sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + bit2num(level3);
-		if (sw_irq != TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC) {
-			goto RETURN;
-		}
-	}
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane) {
-		int irq = i8259_irq();
-		if (irq >= 0)
-			sw_irq = irq;
-	}
-#endif
-
-      RETURN:
-	return (sw_irq);
-}
-
-static struct irqaction toshiba_rbtx4927_irq_ioc_action = {
-	.handler	= no_action,
-	.flags		= IRQF_SHARED,
-	.mask		= CPU_MASK_NONE,
-	.name		= TOSHIBA_RBTX4927_IOC_NAME
-};
-
-
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
-
-
-static void __init toshiba_rbtx4927_irq_ioc_init(void)
-{
-	int i;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_INIT,
-				     "beg=%d end=%d\n",
-				     TOSHIBA_RBTX4927_IRQ_IOC_BEG,
-				     TOSHIBA_RBTX4927_IRQ_IOC_END);
-
-	for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++)
-		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
-					 handle_level_irq);
-
-	setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC,
-		  &toshiba_rbtx4927_irq_ioc_action);
-}
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-}
-
-
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_DISABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	mmiowb();
-}
-
-
-void __init arch_init_irq(void)
-{
-	extern void tx4927_irq_init(void);
-
-	tx4927_irq_init();
-	toshiba_rbtx4927_irq_ioc_init();
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane)
-		init_i8259_irqs();
-#endif
-	/* Onboard 10M Ether: High Active */
-	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
-
-	wbflush();
-}
-
-void toshiba_rbtx4927_irq_dump(char *key)
-{
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-	{
-		u32 i, j = 0;
-		for (i = 0; i < NR_IRQS; i++) {
-			if (strcmp(irq_desc[i].chip->name, "none")
-			    == 0)
-				continue;
-
-			if ((i >= 1)
-			    && (irq_desc[i - 1].chip->name ==
-				irq_desc[i].chip->name)) {
-				j++;
-			} else {
-				j = 0;
-			}
-			TOSHIBA_RBTX4927_IRQ_DPRINTK
-			    (TOSHIBA_RBTX4927_IRQ_INFO,
-			     "%s irq=0x%02x/%3d s=0x%08x h=0x%08x a=0x%08x ah=0x%08x d=%1d n=%s/%02d\n",
-			     key, i, i, irq_desc[i].status,
-			     (u32) irq_desc[i].chip,
-			     (u32) irq_desc[i].action,
-			     (u32) (irq_desc[i].action ? irq_desc[i].
-				    action->handler : 0),
-			     irq_desc[i].depth,
-			     irq_desc[i].chip->name, j);
-		}
-	}
-#endif
-}
-
-void toshiba_rbtx4927_irq_dump_pics(char *s)
-{
-	u32 level0_m;
-	u32 level0_s;
-	u32 level1_m;
-	u32 level1_s;
-	u32 level2;
-	u32 level2_p;
-	u32 level2_s;
-	u32 level3_m;
-	u32 level3_s;
-	u32 level4_m;
-	u32 level4_s;
-	u32 level5_m;
-	u32 level5_s;
-
-	if (s == NULL)
-		s = "null";
-
-	level0_m = (read_c0_status() & 0x0000ff00) >> 8;
-	level0_s = (read_c0_cause() & 0x0000ff00) >> 8;
-
-	level1_m = level0_m;
-	level1_s = level0_s & 0x87;
-
-	level2 = __raw_readl((void __iomem *)0xff1ff6a0UL);
-	level2_p = (((level2 & 0x10000)) ? 0 : 1);
-	level2_s = (((level2 & 0x1f) == 0x1f) ? 0 : (level2 & 0x1f));
-
-	level3_m = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB) & 0x1f;
-	level3_s = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-
-	level4_m = inb(0x21);
-	outb(0x0A, 0x20);
-	level4_s = inb(0x20);
-
-	level5_m = inb(0xa1);
-	outb(0x0A, 0xa0);
-	level5_s = inb(0xa0);
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "dump_raw_pic() ");
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level0_m,
-				     level0_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level1_m,
-				     level1_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "pic:e=0x%02x/s=0x%02x ", level2_p,
-				     level2_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "ioc:m=0x%02x/s=0x%02x ", level3_m,
-				     level3_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbm:m=0x%02x/s=0x%02x ", level4_m,
-				     level4_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbs:m=0x%02x/s=0x%02x ", level5_m,
-				     level5_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, "[%s]\n",
-				     s);
-}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
deleted file mode 100644
index f3f86857beae..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * rbtx4927 specific prom routines
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/tx4927/tx4927.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;			/* Always ignore the "-c" at argv[0] */
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4927_get_mem_size(void);
-	extern char* toshiba_name;
-	int msize;
-
-	prom_init_cmdline();
-
-	if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
-		mips_machtype = MACH_TOSHIBA_RBTX4927;
-		toshiba_name  = "TX4927";
-	} else {
-		mips_machtype = MACH_TOSHIBA_RBTX4937;
-		toshiba_name  = "TX4937";
-	}
-
-	msize = tx4927_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4927/RBTX4937";
-}
-
-char * __init prom_getcmdline(void)
-{
-        return &(arcs_cmdline[0]);
-}
-
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
deleted file mode 100644
index 2203c77b2ce2..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * Toshiba rbtx4927 specific setup
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: Michael Pruznick, michael_pruznick@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#ifdef CONFIG_PCI
-#include <asm/tx4927/tx4927_pci.h>
-#endif
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#undef TOSHIBA_RBTX4927_SETUP_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_SETUP       ( 1 <<  4 )
-#define TOSHIBA_RBTX4927_SETUP_PCIBIOS     ( 1 <<  7 )
-#define TOSHIBA_RBTX4927_SETUP_PCI1        ( 1 <<  8 )
-#define TOSHIBA_RBTX4927_SETUP_PCI2        ( 1 <<  9 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-static const u32 toshiba_rbtx4927_setup_debug_flag =
-    (TOSHIBA_RBTX4927_SETUP_SETUP |
-     | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
-     TOSHIBA_RBTX4927_SETUP_PCI2);
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...)
-#endif
-
-/* These functions are used for rebooting or halting the machine*/
-extern void toshiba_rbtx4927_restart(char *command);
-extern void toshiba_rbtx4927_halt(void);
-extern void toshiba_rbtx4927_power_off(void);
-
-int tx4927_using_backplane = 0;
-
-extern void toshiba_rbtx4927_irq_setup(void);
-
-char *prom_getcmdline(void);
-
-#ifdef CONFIG_PCI
-#undef TX4927_SUPPORT_COMMAND_IO
-#undef  TX4927_SUPPORT_PCI_66
-int tx4927_cpu_clock = 100000000;	/* 100MHz */
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-unsigned long mips_memory_upper;
-static int tx4927_ccfg_toeon = 1;
-static int tx4927_pcic_trdyto = 0;	/* default: disabled */
-unsigned long tx4927_ce_base[8];
-void tx4927_reset_pci_pcic(void);
-int tx4927_pci66 = 0;		/* 0:auto */
-#endif
-
-char *toshiba_name = "";
-
-#ifdef CONFIG_PCI
-extern struct pci_controller tx4927_controller;
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-				    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = (void *)hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, dword, u32)
-
-static int __init tx4927_pcibios_init(void)
-{
-	unsigned int id;
-	u32 pci_devfn;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int busno = 0; /* One bus on the Toshiba */
-	struct pci_controller *hose = &tx4927_controller;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "-\n");
-
-	for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) {
-		early_read_config_dword(hose, busno, busno, pci_devfn,
-					PCI_VENDOR_ID, &id);
-
-		if (id == 0xffffffff) {
-			continue;
-		}
-
-		if (id == 0x94601055) {
-			u8 v08_64;
-			u32 v32_b0;
-			u8 v08_e1;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/isa --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x64, &v08_64);
-			early_read_config_dword(hose, busno, busno,
-						pci_devfn, 0xb0, &v32_b0);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0xe1, &v08_e1);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xe1 = 0x%02x\n", s, v08_e1);
-
-			/* serial irq control */
-			v08_64 = 0xd0;
-
-			/* serial irq pin */
-			v32_b0 |= 0x00010000;
-
-			/* ide irq on isa14 */
-			v08_e1 &= 0xf0;
-			v08_e1 |= 0x0d;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xe1 = 0x%02x\n", s, v08_e1);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x64, v08_64);
-			early_write_config_dword(hose, busno, busno,
-						 pci_devfn, 0xb0, v32_b0);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0xe1, v08_e1);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x64,
-						       &v08_64);
-				early_read_config_dword(hose, busno, busno,
-							pci_devfn, 0xb0,
-							&v32_b0);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0xe1,
-						       &v08_e1);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x64 = 0x%02x\n", s, v08_64);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xb0 = 0x%02x\n", s, v32_b0);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xe1 = 0x%02x\n", s, v08_e1);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-		if (id == 0x91301055) {
-			u8 v08_04;
-			u8 v08_09;
-			u8 v08_41;
-			u8 v08_43;
-			u8 v08_5c;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/ide --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x04, &v08_04);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x09, &v08_09);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x41, &v08_41);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x43, &v08_43);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x5c, &v08_5c);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x5c = 0x%02x\n", s, v08_5c);
-
-			/* enable ide master/io */
-			v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-
-			/* enable ide native mode */
-			v08_09 |= 0x05;
-
-			/* enable primary ide */
-			v08_41 |= 0x80;
-
-			/* enable secondary ide */
-			v08_43 |= 0x80;
-
-			/*
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 *
-			 * This line of code is intended to provide the user with a work
-			 * around solution to the anomalies cited in SMSC's anomaly sheet
-			 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
-			 *
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 */
-			v08_5c |= 0x01;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x5c = 0x%02x\n", s, v08_5c);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x5c, v08_5c);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x04, v08_04);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x09, v08_09);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x41, v08_41);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x43, v08_43);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x04,
-						       &v08_04);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x09,
-						       &v08_09);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x41,
-						       &v08_41);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x43,
-						       &v08_43);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x5c,
-						       &v08_5c);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x04 = 0x%02x\n", s, v08_04);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x09 = 0x%02x\n", s, v08_09);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x41 = 0x%02x\n", s, v08_41);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x43 = 0x%02x\n", s, v08_43);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x5c = 0x%02x\n", s, v08_5c);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-	}
-
-	register_pci_controller(&tx4927_controller);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "+\n");
-
-	return 0;
-}
-
-arch_initcall(tx4927_pcibios_init);
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init tx4927_pci_setup(void)
-{
-	static int called = 0;
-	extern unsigned int tx4927_get_mem_size(void);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n");
-
-	mips_memory_upper = tx4927_get_mem_size() << 20;
-	mips_memory_upper += KSEG0;
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_memory_upper\n",
-				       mips_memory_upper);
-	mips_pci_io_base = TX4927_PCIIO;
-	mips_pci_io_size = TX4927_PCIIO_SIZE;
-	mips_pci_mem_base = TX4927_PCIMEM;
-	mips_pci_mem_size = TX4927_PCIMEM_SIZE;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_base\n",
-				       mips_pci_io_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_size\n",
-				       mips_pci_io_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_base\n",
-				       mips_pci_mem_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_size\n",
-				       mips_pci_mem_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.start\n",
-				       pci_io_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.end\n",
-				       pci_io_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.start\n",
-				       pci_mem_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.end\n",
-				       pci_mem_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_io_port_base",
-				       mips_io_port_base);
-	if (!called) {
-		printk
-		    ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-		     toshiba_name,
-		     (unsigned short) (tx4927_pcicptr->pciid >> 16),
-		     (unsigned short) (tx4927_pcicptr->pciid & 0xffff),
-		     (unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
-		     (!(tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIXARB)) ? "External" :
-		     "Internal");
-		called = 1;
-	}
-	printk("%s PCIC --%s PCICLK:", toshiba_name,
-	       (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
-		int pciclk = 0;
-		if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-			case TX4937_CCFG_PCIDIVMODE_4:
-				pciclk = tx4927_cpu_clock / 4;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_4_5:
-				pciclk = tx4927_cpu_clock * 2 / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5_5:
-				pciclk = tx4927_cpu_clock * 2 / 11;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_8:
-				pciclk = tx4927_cpu_clock / 8;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_9:
-				pciclk = tx4927_cpu_clock / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_10:
-				pciclk = tx4927_cpu_clock / 10;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_11:
-				pciclk = tx4927_cpu_clock / 11;
-				break;
-			}
-
-		else
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-			case TX4927_CCFG_PCIDIVMODE_2_5:
-				pciclk = tx4927_cpu_clock * 2 / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_3:
-				pciclk = tx4927_cpu_clock / 3;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_6:
-				pciclk = tx4927_cpu_clock / 6;
-				break;
-			}
-
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		int pciclk = 0;
-		int pciclk_setting = *tx4927_pci_clk_ptr;
-		switch (pciclk_setting & TX4927_PCI_CLK_MASK) {
-		case TX4927_PCI_CLK_33:
-			pciclk = 33333333;
-			break;
-		case TX4927_PCI_CLK_25:
-			pciclk = 25000000;
-			break;
-		case TX4927_PCI_CLK_66:
-			pciclk = 66666666;
-			break;
-		case TX4927_PCI_CLK_50:
-			pciclk = 50000000;
-			break;
-		}
-		printk("External(%dMHz)", pciclk / 1000000);
-	}
-	printk("\n");
-
-
-
-	/* GB->PCI mappings */
-	tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4;
-	tx4927_pcicptr->g2piogbase = mips_pci_io_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PIOGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PIOGBASE_BSDIS
-#endif
-	    ;
-
-	tx4927_pcicptr->g2piopbase = 0;
-
-	tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4;
-	tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PMnGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PMnGBASE_BSDIS
-#endif
-	    ;
-	tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base;
-
-	tx4927_pcicptr->g2pmmask[1] = 0;
-	tx4927_pcicptr->g2pmgbase[1] = 0;
-	tx4927_pcicptr->g2pmpbase[1] = 0;
-	tx4927_pcicptr->g2pmmask[2] = 0;
-	tx4927_pcicptr->g2pmgbase[2] = 0;
-	tx4927_pcicptr->g2pmpbase[2] = 0;
-
-
-	/* PCI->GB mappings (I/O 256B) */
-	tx4927_pcicptr->p2giopbase = 0;	/* 256B */
-
-	/* PCI->GB mappings (MEM 512MB) M0 gets all of memory */
-	tx4927_pcicptr->p2gm0plbase = 0;
-	tx4927_pcicptr->p2gm0pubase = 0;
-	tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_P2GMnGBASE_TECHG
-#else
-	    TX4927_PCIC_P2GMnGBASE_TBSDIS
-#endif
-	    ;
-
-	/* PCI->GB mappings (MEM 16MB) -not used */
-	tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-	tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[1] = 0;
-
-	/* PCI->GB mappings (MEM 1MB) -not used */
-	tx4927_pcicptr->p2gm2pbase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[2] = 0;
-
-
-	/* Enable Initiator Memory 0 Space, I/O Space, Config */
-	tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK;
-	tx4927_pcicptr->pciccfg |=
-	    TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE |
-	    TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR;
-
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	tx4927_pcicptr->pcicfg1 = 0;
-
-	if (tx4927_pcic_trdyto >= 0) {
-		tx4927_pcicptr->g2ptocnt &= ~0xff;
-		tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff);
-	}
-
-	/* Clear All Local Bus Status */
-	tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (TX4927_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL;
-
-	/* PCIC Int => IRC IRQ16 */
-	tx4927_pcicptr->pcicfg2 =
-	    (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC;
-
-	if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) {
-		/* XXX */
-	} else {
-		/* Reset Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA;
-		/* Enable Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN;
-	}
-
-	tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER |
-	    PCI_COMMAND_MEMORY |
-	    PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       ":pci setup complete:\n");
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n");
-}
-
-#endif /* CONFIG_PCI */
-
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
-void toshiba_rbtx4927_restart(char *command)
-{
-	printk(KERN_NOTICE "System Rebooting...\n");
-
-	/* enable the s/w reset register */
-	writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
-
-	/* wait for enable to be seen */
-	while ((readb(RBTX4927_SW_RESET_ENABLE) &
-		RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
-
-	/* do a s/w reset */
-	writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
-
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-
-void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
-}
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	u32 cp0_config;
-	char *argptr;
-
-	printk("CPU is %s\n", toshiba_name);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       "-\n");
-
-	/* f/w leaves this on at startup */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Clearing STO_ERL.\n");
-	clear_c0_status(ST0_ERL);
-
-	/* enable caches -- HCP5 does this, pmon does not */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n");
-	cp0_config = read_c0_config();
-	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
-	write_c0_config(cp0_config);
-
-	set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":mips_io_port_base=0x%08lx\n",
-				       mips_io_port_base);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Resource\n");
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.end = 0xffffffff;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":ResetRoutines\n");
-	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
-
-	for (i = 0; i < TX4927_NR_TMR; i++)
-		txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
-
-#ifdef CONFIG_PCI
-
-	/* PCIC */
-	/*
-	   * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
-	   *
-	   * For TX4927:
-	   * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
-	   * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
-	   * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
-	   * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
-	   * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
-	   * i.e. S9[3]: ON (83MHz), OFF (100MHz)
-	   *
-	   * For TX4937:
-	   * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
-	   * PCIDIVMODE[10] is 0.
-	   * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
-	   * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
-	   * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
-	   * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
-	   * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
-	   * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
-	   *
-	 */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "ccfg is %lx, PCIDIVMODE is %x\n",
-				       (unsigned long) tx4927_ccfgptr->ccfg,
-				       (unsigned long) tx4927_ccfgptr->ccfg &
-				       (mips_machtype == MACH_TOSHIBA_RBTX4937 ?
-					TX4937_CCFG_PCIDIVMODE_MASK :
-					TX4927_CCFG_PCIDIVMODE_MASK));
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCI66,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIMIDE,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIXARB);
-
-	if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-		case TX4937_CCFG_PCIDIVMODE_8:
-		case TX4937_CCFG_PCIDIVMODE_4:
-			tx4927_cpu_clock = 266666666;	/* 266MHz */
-			break;
-		case TX4937_CCFG_PCIDIVMODE_9:
-		case TX4937_CCFG_PCIDIVMODE_4_5:
-			tx4927_cpu_clock = 300000000;	/* 300MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 333333333;	/* 333MHz */
-		}
-	else
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-		case TX4927_CCFG_PCIDIVMODE_2_5:
-		case TX4927_CCFG_PCIDIVMODE_5:
-			tx4927_cpu_clock = 166666666;	/* 166MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 200000000;	/* 200MHz */
-		}
-
-	/* CCFG */
-	/* do reset on watchdog */
-	tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR;
-	/* enable Timeout BusError */
-	if (tx4927_ccfg_toeon)
-		tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
-
-	tx4927_pci_setup();
-	if (tx4927_using_backplane == 1)
-		printk("backplane board IS installed\n");
-	else
-		printk("No Backplane \n");
-
-	/* this is on ISA bus behind PCI bus, so need PCI up first */
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=yes\n");
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_init()\n");
-			smsc_fdc37m81x_init(0x3f0);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_beg()\n");
-			smsc_fdc37m81x_config_beg();
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_set(KBD)\n");
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
-						  SMSC_FDC37M81X_KBD);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
-						  1);
-
-			smsc_fdc37m81x_config_end();
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_end()\n");
-		} else {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=not_found\n");
-		}
-	}
-#else
-	{
-		TOSHIBA_RBTX4927_SETUP_DPRINTK
-		    (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n");
-	}
-#endif
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = TX4927_IRQ_PIC_BEG + 8 + i;
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
-#endif
-
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-			       "+\n");
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = tx4927_cpu_clock / 2;
-	if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + 17,
-				     50000000);
-}
-
-static int __init toshiba_rbtx4927_rtc_init(void)
-{
-	static struct resource __initdata res = {
-		.start	= 0x1c010000,
-		.end	= 0x1c010000 + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(toshiba_rbtx4927_rtc_init);
-
-static int __init rbtx4927_ne_init(void)
-{
-	static struct resource __initdata res[] = {
-		{
-			.start	= RBTX4927_RTL_8019_BASE,
-			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4927_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4927_ne_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4927_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)50000000;
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
deleted file mode 100644
index d90e9cd85138..000000000000
--- a/arch/mips/tx4938/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-if TOSHIBA_RBTX4938
-
-comment "Multiplex Pin Select"
-choice
-	prompt "PIO[58:61]"
-	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
-
-config TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	bool "PIO"
-config TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND"
-config TOSHIBA_RBTX4938_MPLEX_ATA
-	bool "ATA"
-
-endchoice
-
-config TX4938_NAND_BOOT
-	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND Boot Support (EXPERIMENTAL)"
-	help
-	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
-	  Select this option if you need to use NAND boot.
-
-endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
deleted file mode 100644
index 56aa1ed1ee0c..000000000000
--- a/arch/mips/tx4938/common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= prom.o irq.o
-obj-$(CONFIG_KGDB) += dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
deleted file mode 100644
index c059b899d120..000000000000
--- a/arch/mips/tx4938/common/irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/irq.c
- *
- * Common tx4938 irq handler
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4938/rbtx4938.h>
-
-void __init
-tx4938_irq_init(void)
-{
-	mips_cpu_irq_init();
-	txx9_irq_init(TX4938_IRC_REG);
-	set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-int toshiba_rbtx4938_irq_nested(int irq);
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status();
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(TX4938_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {
-		int irq = txx9_irq();
-		if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0))
-			irq = toshiba_rbtx4938_irq_nested(irq);
-		if (irq >= 0)
-			do_IRQ(irq);
-		else
-			spurious_interrupt();
-	} else if (pending & STATUSF_IP1)
-		do_IRQ(TX4938_IRQ_USER1);
-	else if (pending & STATUSF_IP0)
-		do_IRQ(TX4938_IRQ_USER0);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
deleted file mode 100644
index 1644bffa501a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
- *
- * rbtx4938 specific prom routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/tx4938.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4938_get_mem_size(void);
-	int msize;
-#ifndef CONFIG_TX4938_NAND_BOOT
-	prom_init_cmdline();
-#endif
-
-	msize = tx4938_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-
-	return;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-	return;
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4938";
-}
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
deleted file mode 100644
index 3a3659e8633a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *
- * Setup pointers to hardware-dependent routines.
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/rbtx4938.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <linux/spi/spi.h>
-#include <asm/tx4938/spi.h>
-#include <asm/txx9pio.h>
-
-extern char * __init prom_getcmdline(void);
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void rbtx4938_machine_restart(char *command);
-extern void rbtx4938_machine_halt(void);
-extern void rbtx4938_machine_power_off(void);
-
-/* clocks */
-unsigned int txx9_master_clock;
-unsigned int txx9_cpu_clock;
-unsigned int txx9_gbus_clock;
-
-unsigned long rbtx4938_ce_base[8];
-unsigned long rbtx4938_ce_size[8];
-int txboard_pci66_mode;
-static int tx4938_pcic_trdyto;	/* default: disabled */
-static int tx4938_pcic_retryto;	/* default: disabled */
-static int tx4938_ccfg_toeon = 1;
-
-struct tx4938_pcic_reg *pcicptrs[4] = {
-       tx4938_pcicptr  /* default setting for TX4938 */
-};
-
-static struct {
-	unsigned long base;
-	unsigned long size;
-} phys_regions[16] __initdata;
-static int num_phys_regions  __initdata;
-
-#define PHYS_REGION_MINSIZE	0x10000
-
-void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
-void rbtx4938_machine_restart(char *command)
-{
-	local_irq_disable();
-
-	printk("Rebooting...");
-	writeb(1, rbtx4938_softresetlock_addr);
-	writeb(1, rbtx4938_sfvol_addr);
-	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
-}
-
-void __init
-txboard_add_phys_region(unsigned long base, unsigned long size)
-{
-	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
-		printk("phys_region overflow\n");
-		return;
-	}
-	phys_regions[num_phys_regions].base = base;
-	phys_regions[num_phys_regions].size = size;
-	num_phys_regions++;
-}
-unsigned long __init
-txboard_find_free_phys_region(unsigned long begin, unsigned long end,
-			      unsigned long size)
-{
-	unsigned long base;
-	int i;
-
-	for (base = begin / size * size; base < end; base += size) {
-		for (i = 0; i < num_phys_regions; i++) {
-			if (phys_regions[i].size &&
-			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
-			    base + (size - 1) >= phys_regions[i].base)
-				break;
-		}
-		if (i == num_phys_regions)
-			return base;
-	}
-	return 0;
-}
-unsigned long __init
-txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
-				     unsigned long *size)
-{
-	unsigned long sz, base;
-	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
-		base = txboard_find_free_phys_region(begin, end, sz);
-		if (base) {
-			*size = sz;
-			return base;
-		}
-	}
-	return 0;
-}
-unsigned long __init
-txboard_request_phys_region_range(unsigned long begin, unsigned long end,
-				  unsigned long size)
-{
-	unsigned long base;
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region(unsigned long size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region_shrink(unsigned long *size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region_shrink(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, *size);
-	return base;
-}
-
-#ifdef CONFIG_PCI
-void __init
-tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
-		  struct pci_controller *channel,
-		  unsigned long pci_io_base,
-		  int extarb)
-{
-	int i;
-
-	/* Disable All Initiator Space */
-	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
-			      TX4938_PCIC_PCICCFG_G2PIOEN);
-
-	/* GB->PCI mappings */
-	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
-	pcicptr->g2piogbase = pci_io_base |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_G2PIOGBASE_ECHG
-#else
-		TX4938_PCIC_G2PIOGBASE_BSDIS
-#endif
-		;
-	pcicptr->g2piopbase = 0;
-	for (i = 0; i < 3; i++) {
-		pcicptr->g2pmmask[i] = 0;
-		pcicptr->g2pmgbase[i] = 0;
-		pcicptr->g2pmpbase[i] = 0;
-	}
-	if (channel->mem_resource->end) {
-		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
-		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
-#ifdef __BIG_ENDIAN
-			TX4938_PCIC_G2PMnGBASE_ECHG
-#else
-			TX4938_PCIC_G2PMnGBASE_BSDIS
-#endif
-			;
-		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
-	}
-	/* PCI->GB mappings (I/O 256B) */
-	pcicptr->p2giopbase = 0; /* 256B */
-	pcicptr->p2giogbase = 0;
-	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
-	pcicptr->p2gm0plbase = 0;
-	pcicptr->p2gm0pubase = 0;
-	pcicptr->p2gmgbase[0] = 0 |
-		TX4938_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_P2GMnGBASE_TECHG
-#else
-		TX4938_PCIC_P2GMnGBASE_TBSDIS
-#endif
-		;
-	/* PCI->GB mappings (MEM 16MB) */
-	pcicptr->p2gm1plbase = 0xffffffff;
-	pcicptr->p2gm1pubase = 0xffffffff;
-	pcicptr->p2gmgbase[1] = 0;
-	/* PCI->GB mappings (MEM 1MB) */
-	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
-	pcicptr->p2gmgbase[2] = 0;
-
-	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
-	/* Enable Initiator Memory Space */
-	if (channel->mem_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
-	/* Enable Initiator I/O Space */
-	if (channel->io_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
-	/* Enable Initiator Config */
-	pcicptr->pciccfg |=
-		TX4938_PCIC_PCICCFG_ICAEN |
-		TX4938_PCIC_PCICCFG_TCAR;
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	pcicptr->pcicfg1 = 0;
-
-	pcicptr->g2ptocnt &= ~0xffff;
-
-	if (tx4938_pcic_trdyto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff;
-		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
-	}
-
-	if (tx4938_pcic_retryto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff00;
-		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
-	}
-
-	/* Clear All Local Bus Status */
-	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	pcicptr->pcistatus =
-		(pcicptr->pcistatus & 0x0000ffff) |
-		(TX4938_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
-
-	if (!extarb) {
-		/* Reset Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
-		pcicptr->pbabm = 0;
-		/* Enable Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
-	}
-
-      /* PCIC Int => IRC IRQ16 */
-	pcicptr->pcicfg2 =
-		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
-
-	pcicptr->pcistatus = PCI_COMMAND_MASTER |
-		PCI_COMMAND_MEMORY |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-}
-
-int __init
-tx4938_report_pciclk(void)
-{
-	unsigned long pcode = TX4938_REV_PCODE();
-	int pciclk = 0;
-	printk("TX%lx PCIC --%s PCICLK:",
-	       pcode,
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-
-		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pciclk = txx9_cpu_clock / 4; break;
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pciclk = txx9_cpu_clock * 2 / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pciclk = txx9_cpu_clock / 5; break;
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-			pciclk = txx9_cpu_clock * 2 / 11; break;
-		case TX4938_CCFG_PCIDIVMODE_8:
-			pciclk = txx9_cpu_clock / 8; break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-			pciclk = txx9_cpu_clock / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-			pciclk = txx9_cpu_clock / 10; break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-			pciclk = txx9_cpu_clock / 11; break;
-		}
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		printk("External");
-		pciclk = -1;
-	}
-	printk("\n");
-	return pciclk;
-}
-
-void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
-{
-	pcicptrs[ch] = pcicptr;
-}
-
-struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
-{
-       return pcicptrs[ch];
-}
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-                                    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = bus.sysdata = hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, word, u16 *)
-
-int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
-{
-	u32 pci_devfn;
-	unsigned short vid;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int cap66 = -1;
-	u16 stat;
-
-	printk("PCI: Checking 66MHz capabilities...\n");
-
-	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-		if (early_read_config_word(hose, top_bus, current_bus,
-					   pci_devfn, PCI_VENDOR_ID,
-					   &vid) != PCIBIOS_SUCCESSFUL)
-			continue;
-
-		if (vid == 0xffff) continue;
-
-		/* check 66MHz capability */
-		if (cap66 < 0)
-			cap66 = 1;
-		if (cap66) {
-			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-					       PCI_STATUS, &stat);
-			if (!(stat & PCI_STATUS_66MHZ)) {
-				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
-				       current_bus, pci_devfn);
-				cap66 = 0;
-				break;
-			}
-		}
-	}
-	return cap66 > 0;
-}
-
-int __init
-tx4938_pciclk66_setup(void)
-{
-	int pciclk;
-
-	/* Assert M66EN */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
-	/* Double PCICLK (if possible) */
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-		unsigned int pcidivmode =
-			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
-		switch (pcidivmode) {
-		case TX4938_CCFG_PCIDIVMODE_8:
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
-			pciclk = txx9_cpu_clock / 4;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
-			pciclk = txx9_cpu_clock * 2 / 9;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
-			pciclk = txx9_cpu_clock / 5;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-		default:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
-			pciclk = txx9_cpu_clock * 2 / 11;
-			break;
-		}
-		tx4938_ccfgptr->ccfg =
-			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
-			| pcidivmode;
-		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
-		       (unsigned long)tx4938_ccfgptr->ccfg);
-	} else {
-		pciclk = -1;
-	}
-	return pciclk;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-static int __init tx4938_pcibios_init(void)
-{
-	unsigned long mem_base[2];
-	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
-	unsigned long io_base[2];
-	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
-	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
-	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
-
-	PCIBIOS_MIN_IO = 0x00001000UL;
-
-	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
-	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
-
-	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
-	       extarb ? "External" : "Internal");
-
-	/* setup PCI area */
-	tx4938_pci_controller[0].io_resource->start = io_base[0];
-	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
-	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
-	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
-
-	set_tx4938_pcicptr(0, tx4938_pcicptr);
-
-	register_pci_controller(&tx4938_pci_controller[0]);
-
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
-		printk("TX4938_CCFG_PCI66 already configured\n");
-		txboard_pci66_mode = -1; /* already configured */
-	}
-
-	/* Reset PCI Bus */
-	writeb(0, rbtx4938_pcireset_addr);
-	/* Reset PCIC */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-	if (txboard_pci66_mode > 0)
-		tx4938_pciclk66_setup();
-	mdelay(10);
-	/* clear PCIC reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-	writeb(1, rbtx4938_pcireset_addr);
-	mmiowb();
-	tx4938_report_pcic_status1(tx4938_pcicptr);
-
-	tx4938_report_pciclk();
-	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	if (txboard_pci66_mode == 0 &&
-	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
-		/* Reset PCI Bus */
-		writeb(0, rbtx4938_pcireset_addr);
-		/* Reset PCIC */
-		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-		tx4938_pciclk66_setup();
-		mdelay(10);
-		/* clear PCIC reset */
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-		writeb(1, rbtx4938_pcireset_addr);
-		mmiowb();
-		/* Reinitialize PCIC */
-		tx4938_report_pciclk();
-		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	}
-
-	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
-	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
-	/* Reset PCIC1 */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
-	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
-	else
-		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
-	mdelay(10);
-	/* clear PCIC1 reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-	tx4938_report_pcic_status1(tx4938_pcic1ptr);
-
-	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
-	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
-	printk("%s PCICLK:%dMHz\n",
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
-	       txx9_gbus_clock /
-	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
-	       1000000);
-
-	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
-	tx4938_pci_controller[1].io_resource->start =
-		io_base[1] - io_base[0];
-	tx4938_pci_controller[1].io_resource->end =
-		io_base[1] - io_base[0] + io_size[1] - 1;
-	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
-	tx4938_pci_controller[1].mem_resource->end =
-		mem_base[1] + mem_size[1] - 1;
-	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
-
-	register_pci_controller(&tx4938_pci_controller[1]);
-
-	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
-
-	/* map ioport 0 to PCI I/O space address 0 */
-	set_io_port_base(KSEG1 + io_base[0]);
-
-	return 0;
-}
-
-arch_initcall(tx4938_pcibios_init);
-
-#endif /* CONFIG_PCI */
-
-/* SPI support */
-
-/* chip select for SPI devices */
-#define	SEEPROM1_CS	7	/* PIO7 */
-#define	SEEPROM2_CS	0	/* IOC */
-#define	SEEPROM3_CS	1	/* IOC */
-#define	SRTC_CS	2	/* IOC */
-
-#ifdef CONFIG_PCI
-static int __init rbtx4938_ethaddr_init(void)
-{
-	unsigned char dat[17];
-	unsigned char sum;
-	int i;
-
-	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
-		printk(KERN_ERR "seeprom: read error.\n");
-		return -ENODEV;
-	} else {
-		if (strcmp(dat, "MAC") != 0)
-			printk(KERN_WARNING "seeprom: bad signature.\n");
-		for (i = 0, sum = 0; i < sizeof(dat); i++)
-			sum += dat[i];
-		if (sum)
-			printk(KERN_WARNING "seeprom: bad checksum.\n");
-	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(tx4938_ccfgptr->pcfg &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
-	return 0;
-}
-device_initcall(rbtx4938_ethaddr_init);
-#endif /* CONFIG_PCI */
-
-static void __init rbtx4938_spi_setup(void)
-{
-	/* set SPI_SEL */
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
-}
-
-static struct resource rbtx4938_fpga_resource;
-
-static char pcode_str[8];
-static struct resource tx4938_reg_resource = {
-	.start	= TX4938_REG_BASE,
-	.end	= TX4938_REG_BASE + TX4938_REG_SIZE,
-	.name	= pcode_str,
-	.flags	= IORESOURCE_MEM
-};
-
-void __init tx4938_board_setup(void)
-{
-	int i;
-	unsigned long divmode;
-	int cpuclk = 0;
-	unsigned long pcode = TX4938_REV_PCODE();
-
-	ioport_resource.start = 0x1000;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0x1000;
-	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
-
-	sprintf(pcode_str, "TX%lx", pcode);
-	/* SDRAMC,EBUSC are configured by PROM */
-	for (i = 0; i < 8; i++) {
-		if (!(tx4938_ebuscptr->cr[i] & 0x8))
-			continue;	/* disabled */
-		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
-		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
-	}
-
-	/* clocks */
-	if (txx9_master_clock) {
-		/* calculate gbus_clock and cpu_clock_freq from master_clock */
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = txx9_master_clock * 4; break;
-		default:
-			txx9_gbus_clock = txx9_master_clock;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			cpuclk = txx9_gbus_clock * 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			cpuclk = txx9_gbus_clock * 5 / 2; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			cpuclk = txx9_gbus_clock * 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			cpuclk = txx9_gbus_clock * 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			cpuclk = txx9_gbus_clock * 9 / 2; break;
-		}
-		txx9_cpu_clock = cpuclk;
-	} else {
-		if (txx9_cpu_clock == 0) {
-			txx9_cpu_clock = 300000000;	/* 300MHz */
-		}
-		/* calculate gbus_clock and master_clock from cpu_clock_freq */
-		cpuclk = txx9_cpu_clock;
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			txx9_gbus_clock = cpuclk / 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			txx9_gbus_clock = cpuclk * 2 / 5; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			txx9_gbus_clock = cpuclk / 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			txx9_gbus_clock = cpuclk / 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = cpuclk * 2 / 9; break;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_master_clock = txx9_gbus_clock / 4; break;
-		default:
-			txx9_master_clock = txx9_gbus_clock;
-		}
-	}
-	/* change default value to udelay/mdelay take reasonable time */
-	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-	/* CCFG */
-	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
-	/* do reset on watchdog */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR;
-	/* clear PCIC1 reset */
-	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-
-	/* enable Timeout BusError */
-	if (tx4938_ccfg_toeon)
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
-
-	/* DMA selection */
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
-
-	/* Use external clock for external arbiter */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
-		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
-
-	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
-	       pcode_str,
-	       cpuclk / 1000000, txx9_master_clock / 1000000,
-	       (unsigned long)tx4938_ccfgptr->crir,
-	       tx4938_ccfgptr->ccfg,
-	       tx4938_ccfgptr->pcfg);
-
-	printk("%s SDRAMC --", pcode_str);
-	for (i = 0; i < 4; i++) {
-		unsigned long long cr = tx4938_sdramcptr->cr[i];
-		unsigned long ram_base, ram_size;
-		if (!((unsigned long)cr & 0x00000400))
-			continue;	/* disabled */
-		ram_base = (unsigned long)(cr >> 49) << 21;
-		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
-		if (ram_base >= 0x20000000)
-			continue;	/* high memory (ignore) */
-		printk(" CR%d:%016Lx", i, cr);
-		txboard_add_phys_region(ram_base, ram_size);
-	}
-	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
-
-	/* SRAM */
-	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
-		unsigned int size = 0x800;
-		unsigned long base =
-			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
-		 txboard_add_phys_region(base, size);
-	}
-
-	/* TMR */
-	for (i = 0; i < TX4938_NR_TMR; i++)
-		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
-
-	/* enable DMA */
-	for (i = 0; i < 2; i++)
-		____raw_writeq(TX4938_DMA_MCR_MSTEN,
-			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
-
-	/* PIO */
-	__raw_writel(0, &tx4938_pioptr->maskcpu);
-	__raw_writel(0, &tx4938_pioptr->maskext);
-
-	/* TX4938 internal registers */
-	if (request_resource(&iomem_resource, &tx4938_reg_resource))
-		printk("request resource for internal registers failed\n");
-}
-
-#ifdef CONFIG_PCI
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
-{
-	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
-	unsigned long g2pstatus = pcicptr->g2pstatus;
-	unsigned long pcicstatus = pcicptr->pcicstatus;
-	static struct {
-		unsigned long flag;
-		const char *str;
-	} pcistat_tbl[] = {
-		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
-		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
-		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
-		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
-		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
-		{ PCI_STATUS_PARITY,	"MasterParityError" },
-	}, g2pstat_tbl[] = {
-		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
-		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
-	}, pcicstat_tbl[] = {
-		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
-		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
-		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
-		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
-		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
-		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
-		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
-		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
-	};
-	int i;
-
-	printk("pcistat:%04x(", pcistatus);
-	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
-		if (pcistatus & pcistat_tbl[i].flag)
-			printk("%s ", pcistat_tbl[i].str);
-	printk("), g2pstatus:%08lx(", g2pstatus);
-	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
-		if (g2pstatus & g2pstat_tbl[i].flag)
-			printk("%s ", g2pstat_tbl[i].str);
-	printk("), pcicstatus:%08lx(", pcicstatus);
-	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
-		if (pcicstatus & pcicstat_tbl[i].flag)
-			printk("%s ", pcicstat_tbl[i].str);
-	printk(")\n");
-}
-
-void tx4938_report_pcic_status(void)
-{
-	int i;
-	struct tx4938_pcic_reg *pcicptr;
-	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
-		tx4938_report_pcic_status1(pcicptr);
-}
-
-#endif /* CONFIG_PCI */
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = txx9_cpu_clock / 2;
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
-				     txx9_gbus_clock / 2);
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned long long pcfg;
-	char *argptr;
-
-	iomem_resource.end = 0xffffffff;	/* 4GB */
-
-	if (txx9_master_clock == 0)
-		txx9_master_clock = 25000000; /* 25MHz */
-	tx4938_board_setup();
-#ifndef CONFIG_PCI
-	set_io_port_base(RBTX4938_ETHER_BASE);
-#endif
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = RBTX4938_IRQ_IRC_SIO(i);
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
-	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
-#endif
-
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
-	rbtx4938_spi_setup();
-	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
-	/* fixup piosel */
-	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-	    TX4938_PCFG_ATA_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
-		       rbtx4938_piosel_addr);
-	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-		 TX4938_PCFG_NDF_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
-		       rbtx4938_piosel_addr);
-	else
-		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
-		       rbtx4938_piosel_addr);
-
-	rbtx4938_fpga_resource.name = "FPGA Registers";
-	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
-	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
-	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
-
-	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
-
-	writeb(0xff, rbtx4938_led_addr);
-	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
-	       readb(rbtx4938_fpga_rev_addr),
-	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
-}
-
-static int __init rbtx4938_ne_init(void)
-{
-	struct resource res[] = {
-		{
-			.start	= RBTX4938_RTL_8019_BASE,
-			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4938_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4938_ne_init);
-
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
-
-static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
-				  int value)
-{
-	u8 val;
-	unsigned long flags;
-	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
-	val = readb(rbtx4938_spics_addr);
-	if (value)
-		val |= 1 << offset;
-	else
-		val &= ~(1 << offset);
-	writeb(val, rbtx4938_spics_addr);
-	mmiowb();
-	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
-}
-
-static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
-				     unsigned int offset, int value)
-{
-	rbtx4938_spi_gpio_set(chip, offset, value);
-	return 0;
-}
-
-static struct gpio_chip rbtx4938_spi_gpio_chip = {
-	.set = rbtx4938_spi_gpio_set,
-	.direction_output = rbtx4938_spi_gpio_dir_out,
-	.label = "RBTX4938-SPICS",
-	.base = 16,
-	.ngpio = 3,
-};
-
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
-static int __init rbtx4938_spi_init(void)
-{
-	struct spi_board_info srtc_info = {
-		.modalias = "rtc-rs5c348",
-		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
-		.bus_num = 0,
-		.chip_select = 16 + SRTC_CS,
-		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
-		.mode = SPI_MODE_1 | SPI_CS_HIGH,
-	};
-	spi_register_board_info(&srtc_info, 1);
-	spi_eeprom_register(SEEPROM1_CS);
-	spi_eeprom_register(16 + SEEPROM2_CS);
-	spi_eeprom_register(16 + SEEPROM3_CS);
-	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
-	gpio_direction_output(16 + SRTC_CS, 0);
-	gpio_request(SEEPROM1_CS, "seeprom1");
-	gpio_direction_output(SEEPROM1_CS, 1);
-	gpio_request(16 + SEEPROM2_CS, "seeprom2");
-	gpio_direction_output(16 + SEEPROM2_CS, 1);
-	gpio_request(16 + SEEPROM3_CS, "seeprom3");
-	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
-	return 0;
-}
-
-static int __init rbtx4938_arch_init(void)
-{
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
-	gpiochip_add(&rbtx4938_spi_gpio_chip);
-	return rbtx4938_spi_init();
-}
-arch_initcall(rbtx4938_arch_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4938_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "spi-baseclk"))
-		return (struct clk *)(txx9_gbus_clock / 2 / 4);
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)(txx9_gbus_clock / 2);
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
new file mode 100644
index 000000000000..b92a134ef124
--- /dev/null
+++ b/arch/mips/txx9/Kconfig
@@ -0,0 +1,115 @@
+config TOSHIBA_JMR3927
+	bool "Toshiba JMR-TX3927 board"
+	depends on MACH_TX39XX
+	select SOC_TX3927
+
+config TOSHIBA_RBTX4927
+	bool "Toshiba RBTX49[23]7 board"
+	depends on MACH_TX49XX
+	select SOC_TX4927
+	help
+	  This Toshiba board is based on the TX4927 processor. Say Y here to
+	  support this machine type
+
+config TOSHIBA_RBTX4938
+	bool "Toshiba RBTX4938 board"
+	depends on MACH_TX49XX
+	select SOC_TX4938
+	help
+	  This Toshiba board is based on the TX4938 processor. Say Y here to
+	  support this machine type
+
+config SOC_TX3927
+	bool
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_TXX9
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX39XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config SOC_TX4927
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_TXX9
+	select PCI_TX4927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config SOC_TX4938
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select CEVT_TXX9
+	select DMA_NONCOHERENT
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_TXX9
+	select PCI_TX4927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
+
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	select I8259
+
+config PICMG_PCI_BACKPLANE_DEFAULT
+	bool "Support for PICMG PCI Backplane"
+	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	default y if !TOSHIBA_FPCIB0
+
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+	prompt "PIO[58:61]"
+	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+	bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND Boot Support (EXPERIMENTAL)"
+	help
+	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+	  Select this option if you need to use NAND boot.
+
+endif
+
+config PCI_TX4927
+	bool
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
new file mode 100644
index 000000000000..668fdaad6448
--- /dev/null
+++ b/arch/mips/txx9/generic/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for common code for TXx9 based systems
+#
+
+obj-y	+= setup.o
+obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o irq_tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= mem_tx4938.o irq_tx4938.o
+obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
+obj-$(CONFIG_KGDB)	+= dbgio.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/txx9/generic/dbgio.c
index 33b9c672a322..33b9c672a322 100644
--- a/arch/mips/tx4938/common/dbgio.c
+++ b/arch/mips/txx9/generic/dbgio.c
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/txx9/generic/irq_tx4927.c
index 0aabd57fdad2..6377bd8a9050 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -26,40 +26,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4927/tx4927.h>
-#ifdef CONFIG_TOSHIBA_RBTX4927
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#endif
+#include <asm/txx9/tx4927.h>
 
 void __init tx4927_irq_init(void)
 {
 	mips_cpu_irq_init();
 	txx9_irq_init(TX4927_IRC_REG);
-	set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)			/* cpu timer */
-		do_IRQ(TX4927_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
-		int irq = txx9_irq();
-#ifdef CONFIG_TOSHIBA_RBTX4927
-		if (irq == TX4927_IRQ_NEST_EXT_ON_PIC)
-			irq = toshiba_rbtx4927_irq_nested(irq);
-#endif
-		if (unlikely(irq < 0)) {
-			spurious_interrupt();
-			return;
-		}
-		do_IRQ(irq);
-	} else if (pending & STATUSF_IP0)		/* user line 0 */
-		do_IRQ(TX4927_IRQ_USER0);
-	else if (pending & STATUSF_IP1)			/* user line 1 */
-		do_IRQ(TX4927_IRQ_USER1);
-	else
-		spurious_interrupt();
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
+				handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
new file mode 100644
index 000000000000..5fc86c9c9d2f
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/mips/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9/tx4938.h>
+
+void __init tx4938_irq_init(void)
+{
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4938_IRC_REG);
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
+				handle_simple_irq);
+}
diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/txx9/generic/mem_tx4927.c
index 6eed53d8f386..12dfc377bf2f 100644
--- a/arch/mips/tx4927/common/tx4927_prom.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -30,13 +30,8 @@
  */
 
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4927/tx4927.h>
+#include <linux/types.h>
+#include <linux/io.h>
 
 static unsigned int __init tx4927_process_sdccr(unsigned long addr)
 {
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/txx9/generic/mem_tx4938.c
index 20baeaeba4cd..20baeaeba4cd 100644
--- a/arch/mips/tx4938/common/prom.c
+++ b/arch/mips/txx9/generic/mem_tx4938.c
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
new file mode 100644
index 000000000000..0b92d8c13208
--- /dev/null
+++ b/arch/mips/txx9/generic/pci.c
@@ -0,0 +1,388 @@
+/*
+ * linux/arch/mips/txx9/pci.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001-2005 MontaVista Software Inc.
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#include <linux/interrupt.h>
+#include <asm/i8259.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+#endif
+
+static int __init
+early_read_config_word(struct pci_controller *hose,
+		       int top_bus, int bus, int devfn, int offset, u16 *value)
+{
+	struct pci_dev fake_dev;
+	struct pci_bus fake_bus;
+
+	fake_dev.bus = &fake_bus;
+	fake_dev.sysdata = hose;
+	fake_dev.devfn = devfn;
+	fake_bus.number = bus;
+	fake_bus.sysdata = hose;
+	fake_bus.ops = hose->pci_ops;
+
+	if (bus != top_bus)
+		/* Fake a parent bus structure. */
+		fake_bus.parent = &fake_bus;
+	else
+		fake_bus.parent = NULL;
+
+	return pci_read_config_word(&fake_dev, offset, value);
+}
+
+int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			    int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	/* It seems SLC90E66 needs some time after PCI reset... */
+	mdelay(80);
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+static struct resource primary_pci_mem_res[2] = {
+	{ .name = "PCI MEM" },
+	{ .name = "PCI MMIO" },
+};
+static struct resource primary_pci_io_res = { .name = "PCI IO" };
+struct pci_controller txx9_primary_pcic = {
+	.mem_resource = &primary_pci_mem_res[0],
+	.io_resource = &primary_pci_io_res,
+};
+
+#ifdef CONFIG_64BIT
+int txx9_pci_mem_high __initdata = 1;
+#else
+int txx9_pci_mem_high __initdata;
+#endif
+
+/*
+ * allocate pci_controller and resources.
+ * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_size and io_size means max size on auto assignment.
+ * pcic must be &txx9_primary_pcic or NULL.
+ */
+struct pci_controller *__init
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size)
+{
+	struct pcic {
+		struct pci_controller c;
+		struct resource r_mem[2];
+		struct resource r_io;
+	} *new = NULL;
+	int min_size = 0x10000;
+
+	if (!pcic) {
+		new = kzalloc(sizeof(*new), GFP_KERNEL);
+		if (!new)
+			return NULL;
+		new->r_mem[0].name = "PCI mem";
+		new->r_mem[1].name = "PCI mmio";
+		new->r_io.name = "PCI io";
+		new->c.mem_resource = new->r_mem;
+		new->c.io_resource = &new->r_io;
+		pcic = &new->c;
+	} else
+		BUG_ON(pcic != &txx9_primary_pcic);
+	pcic->io_resource->flags = IORESOURCE_IO;
+
+	/*
+	 * for auto assignment, first search a (big) region for PCI
+	 * MEM, then search a region for PCI IO.
+	 */
+	if (mem_base) {
+		pcic->mem_resource[0].start = mem_base;
+		pcic->mem_resource[0].end = mem_base + mem_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
+			goto free_and_exit;
+	} else {
+		unsigned long min = 0, max = 0x20000000; /* low 512MB */
+		if (!mem_size) {
+			/* default size for auto assignment */
+			if (txx9_pci_mem_high)
+				mem_size = 0x20000000;	/* mem:512M(max) */
+			else
+				mem_size = 0x08000000;	/* mem:128M(max) */
+		}
+		if (txx9_pci_mem_high) {
+			min = 0x20000000;
+			max = 0xe0000000;
+		}
+		/* search free region for PCI MEM */
+		for (; mem_size >= min_size; mem_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[0],
+					      mem_size, min, max,
+					      mem_size, NULL, NULL) == 0)
+				break;
+		}
+		if (mem_size < min_size)
+			goto free_and_exit;
+	}
+
+	pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (io_base) {
+		pcic->mem_resource[1].start = io_base;
+		pcic->mem_resource[1].end = io_base + io_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
+			goto release_and_exit;
+	} else {
+		if (!io_size)
+			/* default size for auto assignment */
+			io_size = 0x01000000;	/* io:16M(max) */
+		/* search free region for PCI IO in low 512MB */
+		for (; io_size >= min_size; io_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[1],
+					      io_size, 0, 0x20000000,
+					      io_size, NULL, NULL) == 0)
+				break;
+		}
+		if (io_size < min_size)
+			goto release_and_exit;
+		io_base = pcic->mem_resource[1].start;
+	}
+
+	pcic->mem_resource[0].flags = IORESOURCE_MEM;
+	if (pcic == &txx9_primary_pcic &&
+	    mips_io_port_base == (unsigned long)-1) {
+		/* map ioport 0 to PCI I/O space address 0 */
+		set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
+		pcic->io_resource->start = 0;
+		pcic->io_offset = 0;	/* busaddr == ioaddr */
+		pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
+	} else {
+		/* physaddr to ioaddr */
+		pcic->io_resource->start =
+			io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_map_base = mips_io_port_base;
+	}
+	pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
+
+	pcic->mem_offset = 0;	/* busaddr == physaddr */
+
+	printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n",
+	       (unsigned long long)pcic->mem_resource[1].start,
+	       (unsigned long long)pcic->mem_resource[1].end,
+	       (unsigned long long)pcic->mem_resource[0].start,
+	       (unsigned long long)pcic->mem_resource[0].end);
+
+	/* register_pci_controller() will request MEM resource */
+	release_resource(&pcic->mem_resource[0]);
+	return pcic;
+ release_and_exit:
+	release_resource(&pcic->mem_resource[0]);
+ free_and_exit:
+	kfree(new);
+	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+	return NULL;
+}
+
+static int __init
+txx9_arch_pci_init(void)
+{
+	PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */
+	return 0;
+}
+arch_initcall(txx9_arch_pci_init);
+
+/* IRQ/IDSEL mapping */
+int txx9_pci_option =
+#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
+	TXX9_PCI_OPT_PICMG |
+#endif
+	TXX9_PCI_OPT_CLK_AUTO;
+
+enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static irqreturn_t i8259_interrupt(int irq, void *dev_id)
+{
+	int isairq;
+
+	isairq = i8259_irq();
+	if (unlikely(isairq <= I8259A_IRQ_BASE))
+		return IRQ_NONE;
+	generic_handle_irq(isairq);
+	return IRQ_HANDLED;
+}
+
+static int __init
+txx9_i8259_irq_setup(int irq)
+{
+	int err;
+
+	init_i8259_irqs();
+	err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED,
+			  "cascade(i8259)", (void *)(long)irq);
+	if (!err)
+		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+	return err;
+}
+
+static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	int irq;	/* PCI/ISA Bridge interrupt */
+	u8 reg_64;
+	u32 reg_b0;
+	u8 reg_e1;
+	irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
+	if (!irq)
+		return;
+	txx9_i8259_irq_setup(irq);
+	pci_read_config_byte(dev, 0x64, &reg_64);
+	pci_read_config_dword(dev, 0xb0, &reg_b0);
+	pci_read_config_byte(dev, 0xe1, &reg_e1);
+	/* serial irq control */
+	reg_64 = 0xd0;
+	/* serial irq pin */
+	reg_b0 |= 0x00010000;
+	/* ide irq on isa14 */
+	reg_e1 &= 0xf0;
+	reg_e1 |= 0x0d;
+	pci_write_config_byte(dev, 0x64, reg_64);
+	pci_write_config_dword(dev, 0xb0, reg_b0);
+	pci_write_config_byte(dev, 0xe1, reg_e1);
+
+	smsc_fdc37m81x_init(0x3f0);
+	smsc_fdc37m81x_config_beg();
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
+				  SMSC_FDC37M81X_KBD);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
+				  1);
+	smsc_fdc37m81x_config_end();
+}
+
+static void quirk_slc90e66_ide(struct pci_dev *dev)
+{
+	unsigned char dat;
+	int regs[2] = {0x41, 0x43};
+	int i;
+
+	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
+	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+	/* enable SMSC SLC90E66 IDE */
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		pci_read_config_byte(dev, regs[i], &dat);
+		pci_write_config_byte(dev, regs[i], dat | 0x80);
+		pci_read_config_byte(dev, regs[i], &dat);
+		printk(KERN_CONT " IDETIM%d %02x", i, dat);
+	}
+	pci_read_config_byte(dev, 0x5c, &dat);
+	/*
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 *
+	 * This line of code is intended to provide the user with a work
+	 * around solution to the anomalies cited in SMSC's anomaly sheet
+	 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
+	 *
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 */
+	dat |= 0x01;
+	pci_write_config_byte(dev, regs[i], dat);
+	pci_read_config_byte(dev, 0x5c, &dat);
+	printk(KERN_CONT " REG5C %02x", dat);
+	printk(KERN_CONT "\n");
+}
+#endif /* CONFIG_TOSHIBA_FPCIB0 */
+
+static void final_fixup(struct pci_dev *dev)
+{
+	unsigned char bist;
+
+	/* Do build-in self test */
+	if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
+	    (bist & PCI_BIST_CAPABLE)) {
+		unsigned long timeout;
+		pci_set_power_state(dev, PCI_D0);
+		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
+		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
+		do {
+			pci_read_config_byte(dev, PCI_BIST, &bist);
+			if (time_after(jiffies, timeout))
+				break;
+		} while (bist & PCI_BIST_START);
+		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
+			printk(KERN_CONT "failed. (0x%x)\n", bist);
+		else
+			printk(KERN_CONT "OK.\n");
+	}
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	quirk_slc90e66_bridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return txx9_board_vec->pci_map_irq(dev, slot, pin);
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
new file mode 100644
index 000000000000..5afc5d5cab03
--- /dev/null
+++ b/arch/mips/txx9/generic/setup.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/mips/txx9/generic/setup.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#ifdef CONFIG_CPU_TX49XX
+#include <asm/txx9/tx4938.h>
+#endif
+
+/* EBUSC settings of TX4927, etc. */
+struct resource txx9_ce_res[8];
+static char txx9_ce_res_name[8][4];	/* "CEn" */
+
+/* pcode, internal register */
+char txx9_pcode_str[8];
+static struct resource txx9_reg_res = {
+	.name = txx9_pcode_str,
+	.flags = IORESOURCE_MEM,
+};
+void __init
+txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(txx9_ce_res); i++) {
+		sprintf(txx9_ce_res_name[i], "CE%d", i);
+		txx9_ce_res[i].flags = IORESOURCE_MEM;
+		txx9_ce_res[i].name = txx9_ce_res_name[i];
+	}
+
+	sprintf(txx9_pcode_str, "TX%x", pcode);
+	if (base) {
+		txx9_reg_res.start = base & 0xfffffffffULL;
+		txx9_reg_res.end = (base & 0xfffffffffULL) + (size - 1);
+		request_resource(&iomem_resource, &txx9_reg_res);
+	}
+}
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "spi-baseclk"))
+		return (struct clk *)(txx9_gbus_clock / 2 / 4);
+	if (!strcmp(id, "imbus_clk"))
+		return (struct clk *)(txx9_gbus_clock / 2);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+extern struct txx9_board_vec jmr3927_vec;
+extern struct txx9_board_vec rbtx4927_vec;
+extern struct txx9_board_vec rbtx4937_vec;
+extern struct txx9_board_vec rbtx4938_vec;
+
+struct txx9_board_vec *txx9_board_vec __initdata;
+static char txx9_system_type[32];
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int)fw_arg0;
+	char **argv = (char **)fw_arg1;
+	int i;			/* Always ignore the "-c" at argv[0] */
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1)
+		*arcs_cmdline = '\0';
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1)
+			strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+#ifdef CONFIG_CPU_TX39XX
+	txx9_board_vec = &jmr3927_vec;
+#endif
+#ifdef CONFIG_CPU_TX49XX
+	switch (TX4938_REV_PCODE()) {
+	case 0x4927:
+		txx9_board_vec = &rbtx4927_vec;
+		break;
+	case 0x4937:
+		txx9_board_vec = &rbtx4937_vec;
+		break;
+	case 0x4938:
+		txx9_board_vec = &rbtx4938_vec;
+		break;
+	}
+#endif
+
+	strcpy(txx9_system_type, txx9_board_vec->system);
+
+	txx9_board_vec->prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+	return txx9_system_type;
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+/* wrappers */
+void __init plat_mem_setup(void)
+{
+	txx9_board_vec->mem_setup();
+}
+
+void __init arch_init_irq(void)
+{
+	txx9_board_vec->irq_setup();
+}
+
+void __init plat_time_init(void)
+{
+	txx9_board_vec->time_init();
+}
+
+static int __init _txx9_arch_init(void)
+{
+	if (txx9_board_vec->arch_init)
+		txx9_board_vec->arch_init();
+	return 0;
+}
+arch_initcall(_txx9_arch_init);
+
+static int __init _txx9_device_init(void)
+{
+	if (txx9_board_vec->device_init)
+		txx9_board_vec->device_init();
+	return 0;
+}
+device_initcall(_txx9_device_init);
+
+int (*txx9_irq_dispatch)(int pending);
+asmlinkage void plat_irq_dispatch(void)
+{
+	int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	int irq = txx9_irq_dispatch(pending);
+
+	if (likely(irq >= 0))
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+/* see include/asm-mips/mach-tx39xx/mangle-port.h, for example. */
+#ifdef NEEDS_TXX9_SWIZZLE_ADDR_B
+static unsigned long __swizzle_addr_none(unsigned long port)
+{
+	return port;
+}
+unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
+EXPORT_SYMBOL(__swizzle_addr_b);
+#endif
diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 33f517bc9a08..69e487467fa5 100644
--- a/arch/mips/tx4927/common/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
 
 #define DEBUG
 
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/txx9/jmr3927/Makefile
index d86e30dca8f3..ba292c945669 100644
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -2,7 +2,7 @@
 # Makefile for TOSHIBA JMR-TX3927 board
 #
 
-obj-y	 			+= init.o irq.o setup.o
-obj-$(CONFIG_KGDB)		+= kgdb_io.o
+obj-y	+= prom.o irq.o setup.o
+obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 3a47e8ce1196..070c9a115e57 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -39,7 +39,8 @@
 #include <asm/system.h>
 
 #include <asm/processor.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
 
 #if JMR3927_IRQ_END > NR_IRQS
 #error JMR3927_IRQ_END > NR_IRQS
@@ -77,38 +78,32 @@ static void unmask_irq_ioc(unsigned int irq)
 	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
 }
 
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long cp0_cause = read_c0_cause();
-	int irq;
-
-	if ((cp0_cause & CAUSEF_IP7) == 0)
-		return;
-	irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
-
-	do_IRQ(irq + JMR3927_IRQ_IRC);
-}
-
-static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id)
+static int jmr3927_ioc_irqroute(void)
 {
 	unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
 	int i;
 
 	for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
-		if (istat & (1 << i)) {
-			irq = JMR3927_IRQ_IOC + i;
-			do_IRQ(irq);
-		}
+		if (istat & (1 << i))
+			return JMR3927_IRQ_IOC + i;
 	}
-	return IRQ_HANDLED;
+	return -1;
 }
 
-static struct irqaction ioc_action = {
-	.handler = jmr3927_ioc_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "IOC",
-};
+static int jmr3927_irq_dispatch(int pending)
+{
+	int irq;
 
+	if ((pending & CAUSEF_IP7) == 0)
+		return -1;
+	irq = (pending >> CAUSEB_IP2) & 0x0f;
+	irq += JMR3927_IRQ_IRC;
+	if (irq == JMR3927_IRQ_IOCINT)
+		irq = jmr3927_ioc_irqroute();
+	return irq;
+}
+
+#ifdef CONFIG_PCI
 static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
 {
 	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
@@ -122,11 +117,13 @@ static struct irqaction pcierr_action = {
 	.mask = CPU_MASK_NONE,
 	.name = "PCI error",
 };
+#endif
 
 static void __init jmr3927_irq_init(void);
 
-void __init arch_init_irq(void)
+void __init jmr3927_irq_setup(void)
 {
+	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
 	/* all IRC interrupt mode are Low Active. */
@@ -144,7 +141,7 @@ void __init arch_init_irq(void)
 	jmr3927_irq_init();
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
-	setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
+	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
 
 #ifdef CONFIG_PCI
 	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
index 342579cfdc01..5bd757e56f79 100644
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ b/arch/mips/txx9/jmr3927/kgdb_io.c
@@ -31,7 +31,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/jmr3927.h>
 
 #define TIMEOUT       0xffffff
 
diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 5398813e50e6..2cadb423face 100644
--- a/arch/mips/jmr3927/common/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -35,38 +35,42 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/string.h>
-
 #include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
 
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
+#define TIMEOUT       0xffffff
 
-void  __init prom_init_cmdline(void)
+void
+prom_putchar(char c)
 {
-	char *cp;
-	int actr;
-	int prom_argc = fw_arg0;
-	char **prom_argv = (char **) fw_arg1;
+        int i = 0;
 
-	actr = 1; /* Always ignore argv[0] */
+        do {
+            i++;
+            if (i>TIMEOUT)
+                break;
+        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
+	tx3927_sioptr(1)->tfifo = c;
+	return;
+}
 
-	cp = &(arcs_cmdline[0]);
-	while(actr < prom_argc) {
-	        strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	*cp = '\0';
+void
+puts(const char *cp)
+{
+    while (*cp)
+	prom_putchar(*cp++);
+    prom_putchar('\r');
+    prom_putchar('\n');
 }
 
-void __init prom_free_prom_memory(void)
+void __init jmr3927_prom_init(void)
 {
+	/* CCFG */
+	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
+		puts("Warning: TX3927 TLB off\n");
+
+	prom_init_cmdline();
+	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/txx9/jmr3927/setup.c
index f39c444e42d4..5e35ef73c5a5 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -30,21 +30,20 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
 #include <linux/gpio.h>
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/serial_core.h>
 #endif
-
 #include <asm/txx9tmr.h>
 #include <asm/txx9pio.h>
 #include <asm/reboot.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
 extern void puts(const char *cp);
@@ -83,7 +82,7 @@ static void jmr3927_machine_power_off(void)
 	while (1);
 }
 
-void __init plat_time_init(void)
+static void __init jmr3927_time_init(void)
 {
 	txx9_clockevent_init(TX3927_TMR_REG(0),
 			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
@@ -94,12 +93,9 @@ void __init plat_time_init(void)
 #define DO_WRITE_THROUGH
 #define DO_ENABLE_CACHE
 
-extern char * __init prom_getcmdline(void);
 static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
 
-void __init plat_mem_setup(void)
+static void __init jmr3927_mem_setup(void)
 {
 	char *argptr;
 
@@ -112,8 +108,8 @@ void __init plat_mem_setup(void)
 	/*
 	 * IO/MEM resources.
 	 */
-	ioport_resource.start = pci_io_resource.start;
-	ioport_resource.end = pci_io_resource.end;
+	ioport_resource.start = 0;
+	ioport_resource.end = 0xffffffff;
 	iomem_resource.start = 0;
 	iomem_resource.end = 0xffffffff;
 
@@ -191,9 +187,33 @@ void __init plat_mem_setup(void)
 
 static void tx3927_setup(void);
 
+static void __init jmr3927_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+	struct pci_controller *c;
+
+	c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+				      JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+				      JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+	register_pci_controller(c);
+	if (!extarb) {
+		/* Reset PCI Bus */
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+				    JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+	}
+	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+#endif /* CONFIG_PCI */
+}
+
 static void __init jmr3927_board_init(void)
 {
 	tx3927_setup();
+	jmr3927_pci_setup();
 
 	/* SIO0 DTR on */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
@@ -210,15 +230,9 @@ static void __init jmr3927_board_init(void)
 static void __init tx3927_setup(void)
 {
 	int i;
-#ifdef CONFIG_PCI
-	unsigned long mips_pci_io_base = JMR3927_PCIIO;
-	unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
-	unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
-	unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
-	/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-	unsigned long mips_pci_io_pciaddr = 0;
-#endif
 
+	txx9_cpu_clock = JMR3927_CORECLK;
+	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -272,74 +286,6 @@ static void __init tx3927_setup(void)
 	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
 #endif
 
-#ifdef CONFIG_PCI
-	/* PCIC */
-	printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
-	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
-	       tx3927_pcicptr->rid);
-	if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
-		printk("External\n");
-		/* XXX */
-	} else {
-		printk("Internal\n");
-
-		/* Reset PCI Bus */
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
-				    JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
-		/* Disable External PCI Config. Access */
-		tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
-			TX3927_PCIC_LBC_TIBSE |
-			TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
-		/* LB->PCI mappings */
-		tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
-		tx3927_pcicptr->ilbioma = mips_pci_io_base;
-		tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
-		tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->ilbmma = mips_pci_mem_base;
-		tx3927_pcicptr->ipbmma = mips_pci_mem_base;
-		/* PCI->LB mappings */
-		tx3927_pcicptr->iobas = 0xffffffff;
-		tx3927_pcicptr->ioba = 0;
-		tx3927_pcicptr->tlbioma = 0;
-		tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->mba = 0;
-		tx3927_pcicptr->tlbmma = 0;
-		/* Enable Direct mapping Address Space Decoder */
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
-		/* Clear All Local Bus Status */
-		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
-		/* Enable All Local Bus Interrupts */
-		tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
-		/* Clear All PCI Status Error */
-		tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
-		/* Enable All PCI Status Error Interrupts */
-		tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
-		/* PCIC Int => IRC IRQ10 */
-		tx3927_pcicptr->il = TX3927_IR_PCI;
-		/* Target Control (per errata) */
-		tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
-		/* Enable Bus Arbiter */
-		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
-		tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	}
-#endif /* CONFIG_PCI */
-
 	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
@@ -366,7 +312,7 @@ static void __init tx3927_setup(void)
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
-unsigned long __swizzle_addr_b(unsigned long port)
+static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 {
 	if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
 		return port;
@@ -377,7 +323,6 @@ unsigned long __swizzle_addr_b(unsigned long port)
 	return port | 1;
 #endif
 }
-EXPORT_SYMBOL(__swizzle_addr_b);
 
 static int __init jmr3927_rtc_init(void)
 {
@@ -390,7 +335,6 @@ static int __init jmr3927_rtc_init(void)
 	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
-device_initcall(jmr3927_rtc_init);
 
 /* Watchdog support */
 
@@ -410,36 +354,22 @@ static int __init jmr3927_wdt_init(void)
 {
 	return txx9_wdt_init(TX3927_TMR_REG(2));
 }
-device_initcall(jmr3927_wdt_init);
 
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
+static void __init jmr3927_device_init(void)
 {
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)JMR3927_IMCLK;
-	return ERR_PTR(-ENOENT);
+	__swizzle_addr_b = jmr3927_swizzle_addr_b;
+	jmr3927_rtc_init();
+	jmr3927_wdt_init();
 }
-EXPORT_SYMBOL(clk_get);
 
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
+struct txx9_board_vec jmr3927_vec __initdata = {
+	.system = "Toshiba JMR_TX3927",
+	.prom_init = jmr3927_prom_init,
+	.mem_setup = jmr3927_mem_setup,
+	.irq_setup = jmr3927_irq_setup,
+	.time_init = jmr3927_time_init,
+	.device_init = jmr3927_device_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = jmr3927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile
new file mode 100644
index 000000000000..f3e1f597b4f1
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/Makefile
@@ -0,0 +1,3 @@
+obj-y	+= prom.o setup.o irq.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
new file mode 100644
index 000000000000..70f13211bc2a
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -0,0 +1,199 @@
+/*
+ * Toshiba RBTX4927 specific interrupt handlers
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/*
+IRQ  Device
+00   RBTX4927-ISA/00
+01   RBTX4927-ISA/01 PS2/Keyboard
+02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
+03   RBTX4927-ISA/03
+04   RBTX4927-ISA/04
+05   RBTX4927-ISA/05
+06   RBTX4927-ISA/06
+07   RBTX4927-ISA/07
+08   RBTX4927-ISA/08
+09   RBTX4927-ISA/09
+10   RBTX4927-ISA/10
+11   RBTX4927-ISA/11
+12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
+13   RBTX4927-ISA/13
+14   RBTX4927-ISA/14 IDE
+15   RBTX4927-ISA/15
+
+16   TX4927-CP0/00 Software 0
+17   TX4927-CP0/01 Software 1
+18   TX4927-CP0/02 Cascade TX4927-CP0
+19   TX4927-CP0/03 Multiplexed -- do not use
+20   TX4927-CP0/04 Multiplexed -- do not use
+21   TX4927-CP0/05 Multiplexed -- do not use
+22   TX4927-CP0/06 Multiplexed -- do not use
+23   TX4927-CP0/07 CPU TIMER
+
+24   TX4927-PIC/00
+25   TX4927-PIC/01
+26   TX4927-PIC/02
+27   TX4927-PIC/03 Cascade RBTX4927-IOC
+28   TX4927-PIC/04
+29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
+30   TX4927-PIC/06
+31   TX4927-PIC/07
+32   TX4927-PIC/08 TX4927 SerialIO Channel 0
+33   TX4927-PIC/09 TX4927 SerialIO Channel 1
+34   TX4927-PIC/10
+35   TX4927-PIC/11
+36   TX4927-PIC/12
+37   TX4927-PIC/13
+38   TX4927-PIC/14
+39   TX4927-PIC/15
+40   TX4927-PIC/16 TX4927 PCI PCI-C
+41   TX4927-PIC/17
+42   TX4927-PIC/18
+43   TX4927-PIC/19
+44   TX4927-PIC/20
+45   TX4927-PIC/21
+46   TX4927-PIC/22 TX4927 PCI PCI-ERR
+47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
+48   TX4927-PIC/24
+49   TX4927-PIC/25
+50   TX4927-PIC/26
+51   TX4927-PIC/27
+52   TX4927-PIC/28
+53   TX4927-PIC/29
+54   TX4927-PIC/30
+55   TX4927-PIC/31
+
+56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
+57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
+58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
+59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
+60 RBTX4927-IOC/04
+61 RBTX4927-IOC/05
+62 RBTX4927-IOC/06
+63 RBTX4927-IOC/07
+
+NOTES:
+SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+SouthBridge/ISA/pin=0 no pci irq used by this device
+SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
+SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+SouthBridge/PMC/pin=0 no pci irq used by this device
+SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
+*/
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
+
+#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
+static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
+	.name = TOSHIBA_RBTX4927_IOC_NAME,
+	.ack = toshiba_rbtx4927_irq_ioc_disable,
+	.mask = toshiba_rbtx4927_irq_ioc_disable,
+	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
+	.unmask = toshiba_rbtx4927_irq_ioc_enable,
+};
+#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
+#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
+
+static int toshiba_rbtx4927_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
+	if (level3)
+		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
+	return (sw_irq);
+}
+
+static void __init toshiba_rbtx4927_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = RBTX4927_IRQ_IOC;
+	     i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
+					 handle_level_irq);
+	set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq);
+}
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	v |= (1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+}
+
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	mmiowb();
+}
+
+
+static int rbtx4927_irq_dispatch(int pending)
+{
+	int irq;
+
+	if (pending & STATUSF_IP7)			/* cpu timer */
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
+		irq = txx9_irq();
+		if (irq == RBTX4927_IRQ_IOCINT)
+			irq = toshiba_rbtx4927_irq_nested(irq);
+	} else if (pending & STATUSF_IP0)		/* user line 0 */
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP1)			/* user line 1 */
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
+
+void __init rbtx4927_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4927_irq_dispatch;
+	tx4927_irq_init();
+	toshiba_rbtx4927_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
+}
diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/txx9/rbtx4927/prom.c
index d8423e001b2d..942e627d2dc1 100644
--- a/arch/mips/tx4927/common/tx4927_dbgio.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -1,13 +1,14 @@
 /*
- * linux/arch/mips/tx4927/common/tx4927_dbgio.c
- *
- * kgdb interface for gdb
+ * rbtx4927 specific prom routines
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
  *  Free Software Foundation; either version 2 of the License, or (at your
@@ -28,19 +29,17 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
 
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-u8 getDebugChar(void)
+void __init rbtx4927_prom_init(void)
 {
-	extern u8 txx9_sio_kdbg_rd(void);
-	return (txx9_sio_kdbg_rd());
-}
-
+	extern int tx4927_get_mem_size(void);
+	int msize;
 
-int putDebugChar(u8 byte)
-{
-	extern int txx9_sio_kdbg_wr( u8 ch );
-	return (txx9_sio_kdbg_wr(byte));
+	prom_init_cmdline();
+	msize = tx4927_get_mem_size();
+	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
new file mode 100644
index 000000000000..1657fd935da8
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -0,0 +1,443 @@
+/*
+ * Toshiba rbtx4927 specific setup
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: Michael Pruznick, michael_pruznick@mvista.com
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
+#include <asm/txx9/tx4938.h>	/* for TX4937 */
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/serial_core.h>
+#endif
+
+static int tx4927_ccfg_toeon = 1;
+
+#ifdef CONFIG_PCI
+static void __init tx4927_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4927_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4927_report_pciclk();
+	tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		tx4927_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4927_report_pciclk();
+		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	}
+}
+
+static void __init tx4937_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+}
+
+static void __init rbtx4927_arch_init(void)
+{
+	tx4927_pci_setup();
+}
+
+static void __init rbtx4937_arch_init(void)
+{
+	tx4937_pci_setup();
+}
+#else
+#define rbtx4927_arch_init NULL
+#define rbtx4937_arch_init NULL
+#endif /* CONFIG_PCI */
+
+static void __noreturn wait_forever(void)
+{
+	while (1)
+		if (cpu_wait)
+			(*cpu_wait)();
+}
+
+static void toshiba_rbtx4927_restart(char *command)
+{
+	printk(KERN_NOTICE "System Rebooting...\n");
+
+	/* enable the s/w reset register */
+	writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
+
+	/* wait for enable to be seen */
+	while ((readb(RBTX4927_SW_RESET_ENABLE) &
+		RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
+
+	/* do a s/w reset */
+	writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
+
+	/* do something passive while waiting for reset */
+	local_irq_disable();
+	wait_forever();
+	/* no return */
+}
+
+static void toshiba_rbtx4927_halt(void)
+{
+	printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+	wait_forever();
+	/* no return */
+}
+
+static void toshiba_rbtx4927_power_off(void)
+{
+	toshiba_rbtx4927_halt();
+	/* no return */
+}
+
+static void __init rbtx4927_mem_setup(void)
+{
+	int i;
+	u32 cp0_config;
+	char *argptr;
+
+	/* f/w leaves this on at startup */
+	clear_c0_status(ST0_ERL);
+
+	/* enable caches -- HCP5 does this, pmon does not */
+	cp0_config = read_c0_config();
+	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
+	write_c0_config(cp0_config);
+
+	ioport_resource.end = 0xffffffff;
+	iomem_resource.end = 0xffffffff;
+
+	_machine_restart = toshiba_rbtx4927_restart;
+	_machine_halt = toshiba_rbtx4927_halt;
+	pm_power_off = toshiba_rbtx4927_power_off;
+
+	for (i = 0; i < TX4927_NR_TMR; i++)
+		txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic,
+				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
+				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+#else
+	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
+#endif
+
+	/* CCFG */
+	/* do reset on watchdog */
+	tx4927_ccfg_set(TX4927_CCFG_WR);
+	/* enable Timeout BusError */
+	if (tx4927_ccfg_toeon)
+		tx4927_ccfg_set(TX4927_CCFG_TOE);
+
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "root=") == NULL) {
+                strcat(argptr, " root=/dev/nfs rw");
+        }
+#endif
+
+#ifdef CONFIG_IP_PNP
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "ip=") == NULL) {
+                strcat(argptr, " ip=any");
+        }
+#endif
+}
+
+static void __init rbtx49x7_common_time_init(void)
+{
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + 17,
+				     50000000);
+}
+
+static void __init rbtx4927_time_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4927:
+	 * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
+	 * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
+	 * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
+	 * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
+	 * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
+	 * i.e. S9[3]: ON (83MHz), OFF (100MHz)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
+		TX4927_CCFG_PCIDIVMODE_MASK) {
+	case TX4927_CCFG_PCIDIVMODE_2_5:
+	case TX4927_CCFG_PCIDIVMODE_5:
+		txx9_cpu_clock = 166666666;	/* 166MHz */
+		break;
+	default:
+		txx9_cpu_clock = 200000000;	/* 200MHz */
+	}
+
+	rbtx49x7_common_time_init();
+}
+
+static void __init rbtx4937_time_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4937:
+	 * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
+	 * PCIDIVMODE[10] is 0.
+	 * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
+	 * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
+	 * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
+	 * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
+	 * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
+	 * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
+		TX4938_CCFG_PCIDIVMODE_MASK) {
+	case TX4938_CCFG_PCIDIVMODE_8:
+	case TX4938_CCFG_PCIDIVMODE_4:
+		txx9_cpu_clock = 266666666;	/* 266MHz */
+		break;
+	case TX4938_CCFG_PCIDIVMODE_9:
+	case TX4938_CCFG_PCIDIVMODE_4_5:
+		txx9_cpu_clock = 300000000;	/* 300MHz */
+		break;
+	default:
+		txx9_cpu_clock = 333333333;	/* 333MHz */
+	}
+
+	rbtx49x7_common_time_init();
+}
+
+static int __init toshiba_rbtx4927_rtc_init(void)
+{
+	static struct resource __initdata res = {
+		.start	= 0x1c010000,
+		.end	= 0x1c010000 + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4927_ne_init(void)
+{
+	static struct resource __initdata res[] = {
+		{
+			.start	= RBTX4927_RTL_8019_BASE,
+			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4927_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ne", -1,
+						res, ARRAY_SIZE(res));
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4927_wdt_init(void)
+{
+	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void __init rbtx4927_device_init(void)
+{
+	toshiba_rbtx4927_rtc_init();
+	rbtx4927_ne_init();
+	rbtx4927_wdt_init();
+}
+
+struct txx9_board_vec rbtx4927_vec __initdata = {
+	.system = "Toshiba RBTX4927",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4927_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4927_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
+struct txx9_board_vec rbtx4937_vec __initdata = {
+	.system = "Toshiba RBTX4937",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4937_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4937_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 2316dd7dd1bd..9dcc52ae5b9d 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,7 +1,3 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
 obj-y	+= prom.o setup.o irq.o spi_eeprom.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 4d6a8dc46c76..3971a061657a 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
- *
  * Toshiba RBTX4938 specific interrupt handlers
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
@@ -68,7 +66,9 @@ IRQ  Device
 */
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/tx4938/rbtx4938.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
 
 static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
 static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
@@ -82,26 +82,17 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
 	.unmask = toshiba_rbtx4938_irq_ioc_enable,
 };
 
-int
-toshiba_rbtx4938_irq_nested(int sw_irq)
+static int toshiba_rbtx4938_irq_nested(int sw_irq)
 {
 	u8 level3;
 
 	level3 = readb(rbtx4938_imstat_addr);
 	if (level3)
 		/* must use fls so onboard ATA has priority */
-		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
-
+		sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
 	return sw_irq;
 }
 
-static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
-	.handler = no_action,
-	.flags = 0,
-	.mask = CPU_MASK_NONE,
-	.name = TOSHIBA_RBTX4938_IOC_NAME,
-};
-
 /**********************************************************************************/
 /* Functions for ioc                                                              */
 /**********************************************************************************/
@@ -110,13 +101,12 @@ toshiba_rbtx4938_irq_ioc_init(void)
 {
 	int i;
 
-	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
+	for (i = RBTX4938_IRQ_IOC;
+	     i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
 		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
 					 handle_level_irq);
 
-	setup_irq(RBTX4938_IRQ_IOCINT,
-		  &toshiba_rbtx4938_irq_ioc_action);
+	set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
 }
 
 static void
@@ -125,7 +115,7 @@ toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
 	unsigned char v;
 
 	v = readb(rbtx4938_imask_addr);
-	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	v |= (1 << (irq - RBTX4938_IRQ_IOC));
 	writeb(v, rbtx4938_imask_addr);
 	mmiowb();
 }
@@ -136,15 +126,33 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
 	unsigned char v;
 
 	v = readb(rbtx4938_imask_addr);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
 	writeb(v, rbtx4938_imask_addr);
 	mmiowb();
 }
 
-void __init arch_init_irq(void)
+static int rbtx4938_irq_dispatch(int pending)
 {
-	extern void tx4938_irq_init(void);
+	int irq;
+
+	if (pending & STATUSF_IP7)
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {
+		irq = txx9_irq();
+		if (irq == RBTX4938_IRQ_IOCINT)
+			irq = toshiba_rbtx4938_irq_nested(irq);
+	} else if (pending & STATUSF_IP1)
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP0)
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
 
+void __init rbtx4938_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4938_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
 	/* all IRC interrupt mode are Low Active. */
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
new file mode 100644
index 000000000000..fbb37458ddb2
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -0,0 +1,29 @@
+/*
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
+
+void __init rbtx4938_prom_init(void)
+{
+	extern int tx4938_get_mem_size(void);
+	int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+
+	msize = tx4938_get_mem_size();
+	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
new file mode 100644
index 000000000000..aaa987ae0f83
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -0,0 +1,625 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/txx9tmr.h>
+#include <asm/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/serial_core.h>
+#endif
+#include <linux/spi/spi.h>
+#include <asm/txx9/spi.h>
+#include <asm/txx9pio.h>
+
+static int tx4938_ccfg_toeon = 1;
+
+static void rbtx4938_machine_halt(void)
+{
+        printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+
+	while (1)
+		__asm__(".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0");
+}
+
+static void rbtx4938_machine_power_off(void)
+{
+        rbtx4938_machine_halt();
+        /* no return */
+}
+
+static void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	printk("Rebooting...");
+	writeb(1, rbtx4938_softresetlock_addr);
+	writeb(1, rbtx4938_sfvol_addr);
+	writeb(1, rbtx4938_softreset_addr);
+	while(1)
+		;
+}
+
+static void __init rbtx4938_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(0, rbtx4938_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(1, rbtx4938_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(0, rbtx4938_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(1, rbtx4938_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+	    (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) {
+		/* Reset PCIC1 */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+		if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
+		      & TX4938_CCFG_PCI1DMD))
+			tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
+		mdelay(10);
+		/* clear PCIC1 reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		tx4938_report_pci1clk();
+
+		/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
+		c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
+		register_pci_controller(c);
+		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
+	}
+#endif /* CONFIG_PCI */
+}
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+static int __init rbtx4938_ethaddr_init(void)
+{
+#ifdef CONFIG_PCI
+	unsigned char dat[17];
+	unsigned char sum;
+	int i;
+
+	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+		printk(KERN_ERR "seeprom: read error.\n");
+		return -ENODEV;
+	} else {
+		if (strcmp(dat, "MAC") != 0)
+			printk(KERN_WARNING "seeprom: bad signature.\n");
+		for (i = 0, sum = 0; i < sizeof(dat); i++)
+			sum += dat[i];
+		if (sum)
+			printk(KERN_WARNING "seeprom: bad checksum.\n");
+	}
+	for (i = 0; i < 2; i++) {
+		unsigned int id =
+			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
+		struct platform_device *pdev;
+		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
+		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
+			continue;
+		pdev = platform_device_alloc("tc35815-mac", id);
+		if (!pdev ||
+		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
+		    platform_device_add(pdev))
+			platform_device_put(pdev);
+	}
+#endif /* CONFIG_PCI */
+	return 0;
+}
+
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
+}
+
+static struct resource rbtx4938_fpga_resource;
+static struct resource tx4938_sdram_resource[4];
+static struct resource tx4938_sram_resource;
+
+void __init tx4938_board_setup(void)
+{
+	int i;
+	unsigned long divmode;
+	int cpuclk = 0;
+	unsigned long pcode = TX4938_REV_PCODE();
+
+	ioport_resource.start = 0;
+	ioport_resource.end = 0xffffffff;
+	iomem_resource.start = 0;
+	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
+
+	txx9_reg_res_init(pcode, TX4938_REG_BASE,
+			  TX4938_REG_SIZE);
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4938_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	if (txx9_master_clock) {
+		u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+		/* calculate gbus_clock and cpu_clock_freq from master_clock */
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+		if (txx9_cpu_clock == 0) {
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		}
+		/* calculate gbus_clock and master_clock from cpu_clock_freq */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW);
+	/* do reset on watchdog */
+	tx4938_ccfg_set(TX4938_CCFG_WR);
+	/* clear PCIC1 reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+
+	/* enable Timeout BusError */
+	if (tx4938_ccfg_toeon)
+		tx4938_ccfg_set(TX4938_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
+		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		unsigned long long cr = tx4938_sdramcptr->cr[i];
+		unsigned long ram_base, ram_size;
+		if (!((unsigned long)cr & 0x00000400))
+			continue;	/* disabled */
+		ram_base = (unsigned long)(cr >> 49) << 21;
+		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+		if (ram_base >= 0x20000000)
+			continue;	/* high memory (ignore) */
+		printk(" CR%d:%016Lx", i, cr);
+		tx4938_sdram_resource[i].name = "SDRAM";
+		tx4938_sdram_resource[i].start = ram_base;
+		tx4938_sdram_resource[i].end = ram_base + ram_size - 1;
+		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
+	}
+	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+	/* SRAM */
+	if (tx4938_sramcptr->cr & 1) {
+		unsigned int size = 0x800;
+		unsigned long base =
+			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+		tx4938_sram_resource.name = "SRAM";
+		tx4938_sram_resource.start = base;
+		tx4938_sram_resource.end = base + size - 1;
+		tx4938_sram_resource.flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sram_resource);
+	}
+
+	/* TMR */
+	for (i = 0; i < TX4938_NR_TMR; i++)
+		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+	/* enable DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+	/* PIO */
+	__raw_writel(0, &tx4938_pioptr->maskcpu);
+	__raw_writel(0, &tx4938_pioptr->maskext);
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+#endif
+}
+
+static void __init rbtx4938_time_init(void)
+{
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
+				     txx9_gbus_clock / 2);
+}
+
+static void __init rbtx4938_mem_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	iomem_resource.end = 0xffffffff;	/* 4GB */
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+	tx4938_board_setup();
+#ifndef CONFIG_PCI
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = RBTX4938_IRQ_IRC_SIO(i);
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk("PIOSEL: disabling both ata and nand selection\n");
+	local_irq_disable();
+	txx9_clear64(&tx4938_ccfgptr->pcfg,
+		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk("PIOSEL: enabling nand selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk("PIOSEL: enabling ata selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+#endif
+
+#ifdef CONFIG_IP_PNP
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "ip=") == NULL) {
+		strcat(argptr, " ip=any");
+	}
+#endif
+
+
+#ifdef CONFIG_FB
+	{
+		conswitchp = &dummy_con;
+	}
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
+		       rbtx4938_piosel_addr);
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+		 TX4938_PCFG_NDF_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
+		       rbtx4938_piosel_addr);
+	else
+		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
+		       rbtx4938_piosel_addr);
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+		printk("request resource for fpga failed\n");
+
+	_machine_restart = rbtx4938_machine_restart;
+	_machine_halt = rbtx4938_machine_halt;
+	pm_power_off = rbtx4938_machine_power_off;
+
+	writeb(0xff, rbtx4938_led_addr);
+	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+	       readb(rbtx4938_fpga_rev_addr),
+	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
+}
+
+static int __init rbtx4938_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4938_RTL_8019_BASE,
+			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4938_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ne", -1,
+						res, ARRAY_SIZE(res));
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+/* GPIO support */
+
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
+
+static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				  int value)
+{
+	u8 val;
+	unsigned long flags;
+	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
+	val = readb(rbtx4938_spics_addr);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	writeb(val, rbtx4938_spics_addr);
+	mmiowb();
+	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
+}
+
+static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	rbtx4938_spi_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static struct gpio_chip rbtx4938_spi_gpio_chip = {
+	.set = rbtx4938_spi_gpio_set,
+	.direction_output = rbtx4938_spi_gpio_dir_out,
+	.label = "RBTX4938-SPICS",
+	.base = 16,
+	.ngpio = 3,
+};
+
+/* SPI support */
+
+static void __init txx9_spi_init(unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", 0,
+					res, ARRAY_SIZE(res));
+}
+
+static int __init rbtx4938_spi_init(void)
+{
+	struct spi_board_info srtc_info = {
+		.modalias = "rtc-rs5c348",
+		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+		.bus_num = 0,
+		.chip_select = 16 + SRTC_CS,
+		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
+		.mode = SPI_MODE_1 | SPI_CS_HIGH,
+	};
+	spi_register_board_info(&srtc_info, 1);
+	spi_eeprom_register(SEEPROM1_CS);
+	spi_eeprom_register(16 + SEEPROM2_CS);
+	spi_eeprom_register(16 + SEEPROM3_CS);
+	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
+	gpio_direction_output(16 + SRTC_CS, 0);
+	gpio_request(SEEPROM1_CS, "seeprom1");
+	gpio_direction_output(SEEPROM1_CS, 1);
+	gpio_request(16 + SEEPROM2_CS, "seeprom2");
+	gpio_direction_output(16 + SEEPROM2_CS, 1);
+	gpio_request(16 + SEEPROM3_CS, "seeprom3");
+	gpio_direction_output(16 + SEEPROM3_CS, 1);
+	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	return 0;
+}
+
+static void __init rbtx4938_arch_init(void)
+{
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
+	gpiochip_add(&rbtx4938_spi_gpio_chip);
+	rbtx4938_pci_setup();
+	rbtx4938_spi_init();
+}
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4938_wdt_init(void)
+{
+	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void __init rbtx4938_device_init(void)
+{
+	rbtx4938_ethaddr_init();
+	rbtx4938_ne_init();
+	rbtx4938_wdt_init();
+}
+
+struct txx9_board_vec rbtx4938_vec __initdata = {
+	.system = "Toshiba RBTX4938",
+	.prom_init = rbtx4938_prom_init,
+	.mem_setup = rbtx4938_mem_setup,
+	.irq_setup = rbtx4938_irq_setup,
+	.time_init = rbtx4938_time_init,
+	.device_init = rbtx4938_device_init,
+	.arch_init = rbtx4938_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4938_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
index 4d6b4ade5e8c..a7ea8b041c1d 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * spi_eeprom.c
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
  * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
-#include <asm/tx4938/spi.h>
+#include <asm/txx9/spi.h>
 
 #define AT250X0_PAGE_SIZE	8
 
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 559acc09c819..c1be6b37fb2a 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -23,16 +23,6 @@ config IBM_WORKPAD
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-	bool "NEC CMB-VR4133"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config TANBAC_TB022X
 	bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
 	select CEVT_R4K
@@ -73,13 +63,6 @@ config ZAO_CAPCELLA
 
 endchoice
 
-config ROCKHOPPER
-	bool "Support for Rockhopper base board"
-	depends on NEC_CMBVR4133
-	select PCI_VR41XX
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
-
 choice
 	prompt "Base board type"
 	depends on TANBAC_TB022X
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile
deleted file mode 100644
index 5835cae54aca..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the NEC-CMBVR4133
-#
-
-obj-y				:= init.o setup.o
-
-obj-$(CONFIG_PCI)		+= m1535plus.o
-obj-$(CONFIG_ROCKHOPPER)	+= irq.o
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c
deleted file mode 100644
index 7c5e18ee2231..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/init.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/init.c
- *
- * PROM library initialisation code for NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Jun Sun <jsun@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-
-#ifdef CONFIG_ROCKHOPPER
-#include <asm/io.h>
-#include <linux/pci.h>
-
-#define PCICONFDREG	0xaf000c14
-#define PCICONFAREG	0xaf000c18
-
-void disable_pcnet(void)
-{
-	u32 data;
-
-	/*
-	 * Workaround for the bug in PMON on VR4133. PMON leaves
-	 * AMD PCNet controller (on Rockhopper) initialized and running in
-	 * bus master mode. We have do disable it before doing any
-	 * further initialization. Or we get problems with PCI bus 2
-	 * and random lockups and crashes.
-	 */
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (0 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data &= ~4;
-
-	writel(data, PCICONFDREG);
-}
-#endif
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c
deleted file mode 100644
index 7d2d076b0f54..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/irq.c
- *
- * Interrupt routines for the NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-
-static int i8259_get_irq_number(int irq)
-{
-	return i8259_irq();
-}
-
-void __init rockhopper_init_irq(void)
-{
-	int i;
-
-	if(!vr4133_rockhopper) {
-		printk(KERN_ERR "Not a Rockhopper Board \n");
-		return;
-	}
-
-	vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH);
-	vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number);
-}
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
deleted file mode 100644
index 1341f3287d04..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
- *
- * Initialize for ALi M1535+(included M5229 and M5237).
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/vr41xx/cmbvr4133.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-#define CONFIG_PORT(port)	((port) ? 0x3f0 : 0x370)
-#define DATA_PORT(port)		((port) ? 0x3f1 : 0x371)
-#define INDEX_PORT(port)	CONFIG_PORT(port)
-
-#define ENTER_CONFIG_MODE(port)				\
-	do {						\
-		outb_p(0x51, CONFIG_PORT(port));	\
-		outb_p(0x23, CONFIG_PORT(port));	\
-	} while(0)
-
-#define SELECT_LOGICAL_DEVICE(port, dev_no)		\
-	do {						\
-		outb_p(0x07, INDEX_PORT(port));		\
-		outb_p((dev_no), DATA_PORT(port));	\
-	} while(0)
-
-#define WRITE_CONFIG_DATA(port, index, data)		\
-	do {						\
-		outb_p((index), INDEX_PORT(port));	\
-		outb_p((data), DATA_PORT(port));	\
-	} while(0)
-
-#define EXIT_CONFIG_MODE(port)	outb(0xbb, CONFIG_PORT(port))
-
-#define PCI_CONFIG_ADDR	KSEG1ADDR(0x0f000c18)
-#define PCI_CONFIG_DATA	KSEG1ADDR(0x0f000c14)
-
-#ifdef CONFIG_BLK_DEV_FD
-
-void __devinit ali_m1535plus_fdc_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0);		/* FDC */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* FDC: enable */
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x3f0 */
-	WRITE_CONFIG_DATA(port, 0x61, 0xf0);
-	WRITE_CONFIG_DATA(port, 0x70, 0x06);	/* IRQ: 6 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x02);	/* DMA: channel 2 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x08);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf2, 0xff);
-	WRITE_CONFIG_DATA(port, 0xf4, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-#endif
-
-void __devinit ali_m1535plus_parport_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 3);		/* Parallel Port */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x378 */
-	WRITE_CONFIG_DATA(port, 0x61, 0x78);
-	WRITE_CONFIG_DATA(port, 0x70, 0x07);	/* IRQ: 7 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x04);	/* DMA: None */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x8c);	/* IRQ polarity: Active Low */
-	WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_keyboard_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 7);		/* KEYBOARD */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* KEYBOARD: eable */
-	WRITE_CONFIG_DATA(port, 0x70, 0x01);	/* IRQ: 1 */
-	WRITE_CONFIG_DATA(port, 0x72, 0x0c);	/* PS/2 Mouse IRQ: 12 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_hotkey_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0xc);	/* HOTKEY */
-	WRITE_CONFIG_DATA(port, 0x30, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf0, 0x35);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x14);
-	WRITE_CONFIG_DATA(port, 0xf2, 0x11);
-	WRITE_CONFIG_DATA(port, 0xf3, 0x71);
-	WRITE_CONFIG_DATA(port, 0xf5, 0x05);
-	EXIT_CONFIG_MODE(port);
-}
-
-void ali_m1535plus_init(struct pci_dev *dev)
-{
-	pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
-	pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
-	pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
-	pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
-	pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
-	pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
-	pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
-
-	/* IRQ routing */
-	pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
-	pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
-	pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
-	pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
-
-	pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
-	pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
-	pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
-	pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
-
-	pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
-	pci_write_config_byte(dev, 0x5a, 0x00);
-	pci_write_config_byte(dev, 0x5b, 0x00);
-	pci_write_config_word(dev, 0x5c, 0x0000);
-	pci_write_config_byte(dev, 0x5e, 0x00);
-	pci_write_config_byte(dev, 0x5f, 0x00);
-	pci_write_config_word(dev, 0x60, 0x0000);
-
-	pci_write_config_byte(dev, 0x6c, 0x00);
-	pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
-	pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
-
-	pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
-	pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
-	pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
-	pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
-
-	/*
-	 * IRQ setup ALi M5237 USB Host Controller
-	 * IRQ: 9
-	 */
-	pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
-
-	pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15  */
-	pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
-	pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
-	pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
-	pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
-	pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
-	pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
-	pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
-
-#ifdef CONFIG_BLK_DEV_FD
-	ali_m1535plus_fdc_init(1);
-#endif
-
-	ali_m1535plus_keyboard_init(1);
-	ali_m1535plus_hotkey_init(1);
-}
-
-static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
-{
-	u32 data;
-	int shift;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-        data = readl(PCI_CONFIG_DATA);
-
-	shift = (reg & 3) << 3;
-	data &= ~(0xff << shift);
-	data |= (((u32)val) << shift);
-
-	writel(data, PCI_CONFIG_DATA);
-}
-
-static inline u8 ali_config_readb(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u8)(data >> ((reg & 3) << 3));
-}
-
-static inline u16 ali_config_readw(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u16)(data >> ((reg & 2) << 3));
-}
-
-int vr4133_rockhopper = 0;
-void __init ali_m5229_preinit(void)
-{
-	if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL &&
-	    ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) {
-		printk(KERN_INFO "Found an NEC Rockhopper \n");
-		vr4133_rockhopper = 1;
-		/*
-		 * Enable ALi M5229 IDE Controller (both channels)
-		 * IDSEL: A27
-		 */
-		ali_config_writeb(0x58, 0x4c, 16);
-	}
-}
-
-void __init ali_m5229_init(struct pci_dev *dev)
-{
-	/*
-	 * Enable Primary/Secondary Channel Cable Detect 40-Pin
-	 */
-	pci_write_config_word(dev, 0x4a, 0xc023);
-
-	/*
-	 * Set only the 3rd byteis for the master IDE's cycle and
-	 * enable Internal IDE Function
-	 */
-	pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
-
-	pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
-	pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
-	pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
-	pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
-	pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
-	pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
-	pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
-	pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-	pci_write_config_word(dev, PCI_COMMAND,
-	                           PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
-				   PCI_COMMAND_IO);
-}
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
deleted file mode 100644
index 7723d2011b08..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/setup.c
- *
- * Setup for the NEC CMB-VR4133.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for CMBVR4133 board in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/vr41xx/cmbvr4133.h>
-#include <asm/bootinfo.h>
-
-#ifdef CONFIG_MTD
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-static struct mtd_partition cmbvr4133_mtd_parts[] = {
-	{
-		.name =		"User FS",
-		.size =		0x1be0000,
-		.offset =	0,
-		.mask_flags = 	0,
-	},
-	{
-		.name =		"PMON",
-		.size =		0x140000,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
-	},
-	{
-		.name =		"User FS2",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags = 	0,
-	}
-};
-
-#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts)
-#endif
-
-extern void i8259_init(void);
-
-static void __init nec_cmbvr4133_setup(void)
-{
-#ifdef CONFIG_ROCKHOPPER
-	extern void disable_pcnet(void);
-
-	disable_pcnet();
-#endif
-	set_io_port_base(KSEG1ADDR(0x16000000));
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_ROCKHOPPER
-	ali_m5229_preinit();
-#endif
-#endif
-
-#ifdef CONFIG_ROCKHOPPER
-	rockhopper_init_irq();
-#endif
-
-#ifdef CONFIG_MTD
-	/* we use generic physmap mapping driver and we use partitions */
-	physmap_configure(0x1C000000, 0x02000000, 4, NULL);
-	physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions);
-#endif
-
-	/* 128 MB memory support */
-	add_memory_region(0, 0x08000000, BOOT_MEM_RAM);
-
-#ifdef CONFIG_ROCKHOPPER
-	i8259_init();
-#endif
-}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 20eacf2a8424..de88972c5896 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -53,6 +53,9 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	depends on PPC64
@@ -111,6 +114,7 @@ config PPC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_LMB
+	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 
@@ -311,8 +315,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "Build a kdump crash kernel (EXPERIMENTAL)"
-	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
+	bool "Build a kdump crash kernel"
+	depends on PPC_MULTIPLATFORM && PPC64
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The kernel will be linked at a different address than normal, and
@@ -461,6 +465,19 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
+config EXTRA_TARGETS
+	string "Additional default image types"
+	help
+	  List additional targets to be built by the bootwrapper here (separated
+	  by spaces).  This is useful for targets that depend of device tree
+	  files in the .dts directory.
+
+	  Targets in this list will be build as part of the default build
+	  target, or when the user does a 'make zImage' or a
+	  'make zImage.initrd'.
+
+	  If unsure, leave blank
+
 if !44x || BROKEN
 config ARCH_WANTS_FREEZER_CONTROL
 	def_bool y
@@ -541,6 +558,12 @@ config FSL_LBC
 	help
 	  Freescale Localbus support
 
+config FSL_GTM
+	bool
+	depends on PPC_83xx || QUICC_ENGINE || CPM2
+	help
+	  Freescale General-purpose Timers support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a7d24e692bab..2840ab69ef4e 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -57,6 +57,16 @@ config KGDB
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
 	  Unless you are intending to debug the kernel, say N here.
 
+config CODE_PATCHING_SELFTEST
+	bool "Run self-tests of the code-patching code."
+	depends on DEBUG_KERNEL
+	default n
+
+config FTR_FIXUP_SELFTEST
+	bool "Run self-tests of the feature-fixup code."
+	depends on DEBUG_KERNEL
+	default n
+
 choice
 	prompt "Serial Port"
 	depends on KGDB
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b7d4c4ce2fe6..9155c9312c1e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -18,22 +18,16 @@ HAS_BIARCH	:= $(call cc-option-yn, -m32)
 CROSS32_COMPILE ?=
 
 CROSS32CC		:= $(CROSS32_COMPILE)gcc
-CROSS32AS		:= $(CROSS32_COMPILE)as
-CROSS32LD		:= $(CROSS32_COMPILE)ld
 CROSS32AR		:= $(CROSS32_COMPILE)ar
-CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
 
 ifeq ($(HAS_BIARCH),y)
 ifeq ($(CROSS32_COMPILE),)
 CROSS32CC	:= $(CC) -m32
-CROSS32AS	:= $(AS) -a32
-CROSS32LD	:= $(LD) -m elf32ppc
-CROSS32OBJCOPY	:= $(OBJCOPY)
 CROSS32AR	:= GNUTARGET=elf32-powerpc $(AR)
 endif
 endif
 
-export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY
+export CROSS32CC CROSS32AR
 
 ifeq ($(CROSS_COMPILE),)
 KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
@@ -169,12 +163,25 @@ bootwrapper_install %.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '* zImage          - Build default images selected by kernel config'
+  @echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '  uImage          - U-Boot native image format'
+  @echo '  cuImage.<dt>    - Backwards compatible U-Boot image for older'
+  @echo '                    versions which do not support device trees'
+  @echo '  dtbImage.<dt>   - zImage with an embedded device tree blob'
+  @echo '  simpleImage.<dt> - Firmware independent image.'
+  @echo '  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)'
   @echo '  install         - Install kernel using'
   @echo '                    (your) ~/bin/installkernel or'
   @echo '                    (distribution) /sbin/installkernel or'
   @echo '                    install to $$(INSTALL_PATH) and run lilo'
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+  @echo ''
+  @echo '  Targets with <dt> embed a device tree blob inside the image'
+  @echo '  These targets support board with firmware that does not'
+  @echo '  support passing a device tree directly.  Replace <dt> with the'
+  @echo '  name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+  @echo '  (minus the .dts extension).'
 endef
 
 install:
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 095e04db1c0e..19f83c8f219d 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -35,6 +35,8 @@ endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
 
+DTS_FLAGS	?= -p 1024
+
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
@@ -63,10 +65,10 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
-		fixed-head.S ep88xc.c ep405.c \
+		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -213,6 +215,7 @@ image-$(CONFIG_WALNUT)			+= treeImage.walnut
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP)		+= cuImage.sam440ep
 image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
 image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
@@ -242,6 +245,7 @@ image-$(CONFIG_MPC834x_ITX)		+= cuImage.mpc8349emitx \
 					   cuImage.mpc8349emitxgp
 image-$(CONFIG_MPC834x_MDS)		+= cuImage.mpc834x_mds
 image-$(CONFIG_MPC836x_MDS)		+= cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 
 # Board ports in arch/powerpc/platform/85xx/Kconfig
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
@@ -254,6 +258,7 @@ image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
 					   cuImage.mpc8572ds
 image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
+image-$(CONFIG_TQM8548)			+= cuImage.tqm8548
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
@@ -263,6 +268,7 @@ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
+image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -270,6 +276,9 @@ ifeq ($(CONFIG_PPC32),y)
 image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
+# Allow extra targets to be added to the defconfig
+image-y	+= $(subst ",,$(CONFIG_EXTRA_TARGETS))
+
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 		$(patsubst dtbImage%, dtbImage.initrd%, \
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 8041a9845ab7..b1e5611b2ab1 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -25,7 +25,7 @@ char arch[] = "PowerPC";
 #define N_DESCR	6
 unsigned int descr[N_DESCR] = {
 	0xffffffff,		/* real-mode = true */
-	0x00c00000,		/* real-base, i.e. where we expect OF to be */
+	0x02000000,		/* real-base, i.e. where we expect OF to be */
 	0xffffffff,		/* real-size */
 	0xffffffff,		/* virt-base */
 	0xffffffff,		/* virt-size */
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
new file mode 100644
index 000000000000..e43594950ba3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-c2k.c
@@ -0,0 +1,190 @@
+/*
+ * GEFanuc C2K platform code.
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "types.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "elf.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+#include "cuboot.h"
+#include "ppcboot.h"
+
+static u8 *bridge_base;
+
+static void c2k_bridge_setup(u32 mem_size)
+{
+	u32 i, v[30], enables, acc_bits;
+	u32 pci_base_hi, pci_base_lo, size, buf[2];
+	unsigned long cpu_base;
+	int rc;
+	void *devp, *mv64x60_devp;
+	u8 *bridge_pbase, is_coherent;
+	struct mv64x60_cpu2pci_win *tbl;
+	int bus;
+
+	bridge_pbase = mv64x60_get_bridge_pbase();
+	is_coherent = mv64x60_is_coherent();
+
+	if (is_coherent)
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+	else
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+	mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
+	if (mv64x60_devp == NULL)
+		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+
+	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+	enables |= 0x007ffe00; /* Disable all cpu->pci windows */
+	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+	devp = NULL;
+	for (bus = 0; ; bus++) {
+		char name[] = "pci ";
+
+		name[strlen(name)-1] = bus+'0';
+
+		devp = find_node_by_alias(name);
+		if (devp == NULL)
+			break;
+
+		if (bus >= 2)
+			fatal("Error: Only 2 PCI controllers are supported at" \
+				" this time.\n");
+
+		mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
+				mem_size, acc_bits);
+
+		rc = getprop(devp, "ranges", v, sizeof(v));
+		if (rc == 0)
+			fatal("Error: Can't find marvell,mv64360-pci ranges"
+				" property\n\r");
+
+		/* Get the cpu -> pci i/o & mem mappings from the device tree */
+
+		for (i = 0; i < rc; i += 6) {
+			switch (v[i] & 0xff000000) {
+			case 0x01000000: /* PCI I/O Space */
+				tbl = mv64x60_cpu2pci_io;
+				break;
+			case 0x02000000: /* PCI MEM Space */
+				tbl = mv64x60_cpu2pci_mem;
+				break;
+			default:
+				continue;
+			}
+
+			pci_base_hi = v[i+1];
+			pci_base_lo = v[i+2];
+			cpu_base = v[i+3];
+			size = v[i+5];
+
+			buf[0] = cpu_base;
+			buf[1] = size;
+
+			if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+				fatal("Error: Can't translate PCI address " \
+						"0x%x\n\r", (u32)cpu_base);
+
+			mv64x60_config_cpu2pci_window(bridge_base, bus,
+				pci_base_hi, pci_base_lo, cpu_base, size, tbl);
+		}
+
+		enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
+						cpu->pci<bus> mem0 */
+		out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
+			enables);
+	};
+}
+
+static void c2k_fixups(void)
+{
+	u32 mem_size;
+
+	mem_size = mv64x60_get_mem_size(bridge_base);
+	c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
+}
+
+#define MV64x60_MPP_CNTL_0	0xf000
+#define MV64x60_MPP_CNTL_2	0xf008
+#define MV64x60_GPP_IO_CNTL	0xf100
+#define MV64x60_GPP_LEVEL_CNTL	0xf110
+#define MV64x60_GPP_VALUE_SET	0xf118
+
+static void c2k_reset(void)
+{
+	u32 temp;
+
+	udelay(5000000);
+
+	if (bridge_base != 0) {
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+				0x00080004);
+	}
+
+	for (;;);
+}
+
+static bd_t bd;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+
+	fdt_init(_dtb_start);
+
+	bridge_base = mv64x60_get_bridge_base();
+
+	platform_ops.fixups = c2k_fixups;
+	platform_ops.exit = c2k_reset;
+
+	if (serial_console_init() < 0)
+		exit();
+}
diff --git a/arch/powerpc/boot/cuboot-sam440ep.c b/arch/powerpc/boot/cuboot-sam440ep.c
new file mode 100644
index 000000000000..ec10a47460dd
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-sam440ep.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for Sam440ep based off bamboo.c code
+ * original copyrights below
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Based on cuboot-ebony.c
+ *
+ * Modified from cuboot-bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void sam440ep_fixups(void)
+{
+       unsigned long sysclk = 66666666;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+       ibm4xx_sdram_fixup_memsize();
+       ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = sam440ep_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index eb108a877492..21780210057d 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -10,6 +10,7 @@
 #include "ops.h"
 #include "4xx.h"
 #include "cuboot.h"
+#include "stdio.h"
 
 #define TARGET_4xx
 #define TARGET_44x
@@ -17,14 +18,54 @@
 
 static bd_t bd;
 
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
 {
-	unsigned long sysclk = 66000000;
+	void *devp;
+	char name[50];
+	u32 v[2];
+
+	sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
+
+	devp = finddevice(name);
+	if (!devp)
+		return;
+
+	if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+		v[0] = to;
+		setprop(devp, "reg", v, sizeof(v));
+
+		printf("NOR 64M fixup %x -> %x\r\n", from, to);
+	}
+}
+
 
-	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+	ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+	/* Fixup for 64M flash on Rev A boards. */
+	if (bd.bi_flashsize == 0x4000000) {
+		void *devp;
+		u32 v[3];
+
+		devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
+		if (!devp)
+			return;
+
+		/* Fixup the size */
+		if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+			v[2] = bd.bi_flashsize;
+			setprop(devp, "reg", v, sizeof(v));
+		}
+
+		/* Fixup parition offsets */
+		warp_fixup_one_nor(0x300000, 0x3f00000);
+		warp_fixup_one_nor(0x340000, 0x3f40000);
+		warp_fixup_one_nor(0x380000, 0x3f80000);
+	}
 }
 
 
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
new file mode 100644
index 000000000000..8b1bb0e41905
--- /dev/null
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -0,0 +1,282 @@
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		linux,stdout-path = &serial0;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index ba2521bdaab1..6ce0cc2c0208 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,bamboo";
 	compatible = "amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -34,13 +36,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -48,14 +50,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,22 +67,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -92,29 +94,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -124,101 +126,101 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -227,26 +229,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -258,35 +260,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
new file mode 100644
index 000000000000..f5d625fa3e52
--- /dev/null
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -0,0 +1,371 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "C2K";
+	compatible = "GEFanuc,C2K";
+	coherency-off;
+
+	aliases {
+		pci0 = &PCI0;
+		pci1 = &PCI1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "PowerPC,7447";
+			reg = <0>;
+			clock-frequency = <996000000>;	/* 996 MHz */
+			bus-frequency = <166666667>;	/* 166.6666 MHz */
+			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	/* 1GB */
+	};
+
+	system-controller@d8000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		model = "mv64460";
+		compatible = "marvell,mv64360";
+		clock-frequency = <166666667>;		/* 166.66... MHz */
+		reg = <0xd8000000 0x00010000>;
+		virtual-reg = <0xd8000000>;
+		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
+			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
+			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
+			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
+			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
+			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
+			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
+			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
+
+		mdio@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-mdio";
+			reg = <0x2000 4>;
+			PHY0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <0>;
+			};
+			PHY1: ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <1>;
+			};
+			PHY2: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <2>;
+			};
+		};
+
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@1 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@2 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <2>;
+				interrupts = <34>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY2>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xd8004000>;
+			interrupt-base = <0>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
+		};
+
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xd8006000>;
+			interrupt-base = <0>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
+		};
+
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
+		};
+
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
+		};
+
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xd800b800>;
+		};
+
+		MPSC0: mpsc@8000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xd8008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
+		};
+
+		MPSC1: mpsc@9000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xd8009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
+		};
+
+		wdt@b410 {			/* watchdog timer */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
+		};
+
+		i2c@c000 {
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xd800c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
+		};
+
+		PIC: pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0000 0x88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
+		};
+
+		PCI0: pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0cf8 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0c34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* Only one interrupt line for PMC0 slot (INTA) */
+				0x0000 0 0 1 &PIC 88
+			>;
+		};
+
+
+		PCI1: pci@a0000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0c78 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0cb4>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+			interrupt-map = <
+				/* IDSEL 0x01: PMC1 ? */
+				0x0800 0 0 1 &PIC 88
+				/* IDSEL 0x02: cPCI bridge */
+				0x1000 0 0 1 &PIC 88
+				/* IDSEL 0x03: USB controller */
+				0x1800 0 0 1 &PIC 91
+				/* IDSEL 0x04: SATA controller */
+				0x2000 0 0 1 &PIC 95
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x0070 0x10 0x0128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x0380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0x0c28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1dc0 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1dc0 0x40 0x0ca8 0x4>;
+			interrupts = <16>;
+			interrupt-parent = <&PIC>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
+		};
+		/* Devices attached to the device controller */
+		devicebus@045c {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "marvell,mv64306-devctrl";
+			reg = <0x45C 0x88>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			ranges = 	<0 0 0xd8100000 0x10000
+					 2 0 0xd8110000 0x10000
+					 4 0 0xf8000000 0x8000000>;
+			fpga@0,0 {
+				compatible = "sbs,fpga-c2k";
+				reg = <0 0 0x10000>;
+			};
+			fpga_usart@2,0 {
+				compatible = "sbs,fpga_usart-c2k";
+				reg = <2 0 0x10000>;
+			};
+			nor_flash@4,0 {
+				compatible = "cfi-flash";
+				reg = <4 0 0x8000000>; /* 128MB */
+				bank-width = <4>;
+				device-width = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "boot";
+					reg = <0x00000000 0x00080000>;
+				};
+				partition@40000 {
+					label = "kernel";
+					reg = <0x00080000 0x00400000>;
+				};
+				partition@440000 {
+					label = "initrd";
+					reg = <0x00480000 0x00B80000>;
+				};
+				partition@1000000 {
+					label = "rootfs";
+					reg = <0x01000000 0x06800000>;
+				};
+				partition@7800000 {
+					label = "recovery";
+					reg = <0x07800000 0x00800000>;
+					read-only;
+				};
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = &MPSC0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 39634124929b..79fe412c11c9 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,canyonlands";
 	compatible = "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -84,22 +86,22 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460ex";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460ex";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -111,74 +113,74 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
-			num-rx-chans = <10>;
+			num-rx-chans = <16>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -186,103 +188,103 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -293,25 +295,25 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -331,27 +333,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -361,23 +363,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -387,12 +389,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -402,23 +404,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -428,12 +430,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0e..ec2d142291b4 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "ibm,ebony";
 	compatible = "ibm,ebony";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; // Filled in by zImage
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
@@ -87,37 +89,37 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -126,34 +128,34 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; // Filled in by zImage
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; // Filled in by zImage
 				// ranges property is supplied by zImage
 				// based on firmware's configuration of the
 				// EBC bridge
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				small-flash@0,80000 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <0 80000 80000>;
+					reg = <0x00000000 0x00080000 0x00080000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "OpenBIOS";
-						reg = <0 80000>;
+						reg = <0x00000000 0x00080000>;
 						read-only;
 					};
 				};
@@ -161,101 +163,101 @@
 				nvram@1,0 {
 					/* NVRAM & RTC */
 					compatible = "ds1743-nvram";
-					#bytes = <2000>;
-					reg = <1 0 2000>;
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
 				};
 
 				large-flash@2,0 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <2 0 400000>;
+					reg = <0x00000002 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "fs";
-						reg = <0 380000>;
+						reg = <0x00000000 0x00380000>;
 					};
 					partition@380000 {
 						label = "firmware";
-						reg = <380000 80000>;
+						reg = <0x00380000 0x00080000>;
 					};
 				};
 
 				ir@3,0 {
-					reg = <3 0 10>;
+					reg = <0x00000003 0x00000000 0x00000010>;
 				};
 
 				fpga@7,0 {
 					compatible = "Ebony-FPGA";
-					reg = <7 0 10>;
-					virtual-reg = <e8300000>;
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
 				};
 			};
 
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			EMAC0: ethernet@40000800 {
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -263,18 +265,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -282,9 +284,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -296,35 +298,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
 			primary;
-			reg = <2 0ec00000 8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000 4     /* Special cycles */
-			       2 0ec80000 f0	/* Internal registers */
-			       2 0ec80100 fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 17 8
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 18 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 19 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1a 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 92938557ac8a..53ef06cc2134 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ep405";
 	compatible = "ep405";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 
@@ -163,13 +165,13 @@
 			/* NVRAM and RTC */
 			nvrtc@4,200000 {
 				compatible = "ds1742";
-				reg = <4 200000 0>; /* size fixed up by zImage */
+				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
 			};
 
 			/* "BCSR" CPLD contains a PCI irq controller */
 			bcsr@4,0 {
 				compatible = "ep405-bcsr";
-				reg = <4 0 10>;
+				reg = <0x00000004 0x00000000 0x00000010>;
 				interrupt-controller;
 				/* Routing table */
 				irq-routing = [	00	/* SYSERR */
@@ -198,26 +200,26 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* That's all I know about IRQs on that thing ... */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* USB */
-				7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 0f2fc077d8db..24cf0dba120c 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
 	compatible = "amcc,glacier", "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460GT";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,14 +47,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -62,11 +64,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -74,11 +76,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -86,22 +88,22 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460gt";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460gt";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -113,75 +115,75 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
-			num-rx-chans = <20>;
+			num-rx-chans = <32>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
-			desc-base-addr-high = <8>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460gt", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -189,109 +191,109 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460gt", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			RGMII1: emac-rgmii@ef601600 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601600 8>;
+				reg = <0xef601600 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -304,23 +306,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -334,23 +336,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC2>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 12 4
-						 /*Wake*/   1 &UIC2 16 4>;
-				reg = <ef601100 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
-				mal-rx-channel = <10>;
+				mal-rx-channel = <16>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -362,23 +364,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC3>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 13 4
-						 /*Wake*/   1 &UIC2 17 4>;
-				reg = <ef601200 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
-				mal-rx-channel = <18>;
+				mal-rx-channel = <24>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -396,27 +398,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -426,23 +428,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -452,12 +454,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -467,23 +469,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -493,12 +495,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index b5d95ac24dbf..513bc43a71af 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
 	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EXr";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405exr", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,11 +61,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -71,11 +73,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,72 +90,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405exr";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405exr", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -161,68 +163,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4";
+				compatible = "ibm,emac-405exr", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -237,23 +239,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -263,12 +265,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index b5d87895fe06..f87fe7b9ced9 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -10,6 +10,8 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	model = "41K7339";
 	compatible = "ibm,holly";
@@ -21,22 +23,22 @@
 		#size-cells =<0>;
 		PowerPC,750CL@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <8000>;
-			i-cache-size = <8000>;
-			d-cache-sets = <80>;
-			i-cache-sets = <80>;
-			timebase-frequency = <2faf080>;
-			clock-frequency = <23c34600>;
-			bus-frequency = <bebc200>;
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
 		};
 	};
 
 	memory@0 {
 		device_type = "memory";
-		reg = <00000000 20000000>;
+		reg = <0x00000000 0x20000000>;
 	};
 
   	tsi109@c0000000 {
@@ -44,33 +46,33 @@
 		compatible = "tsi109-bridge", "tsi108-bridge";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
 
 		i2c@7000 {
 			device_type = "i2c";
 			compatible  = "tsi109-i2c", "tsi108-i2c";
 			interrupt-parent = <&MPIC>;
-			interrupts = <e 2>;
-			reg = <7000 400>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
 		};
 
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi109-mdio", "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x00006000 0x00000050>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY1: ethernet-phy@1 {
 				compatible = "bcm5461a";
-				reg = <1>;
+				reg = <0x00000001>;
 				txc-rxc-delay-disable;
 			};
 
 			PHY2: ethernet-phy@2 {
 				compatible = "bcm5461a";
-				reg = <2>;
+				reg = <0x00000002>;
 				txc-rxc-delay-disable;
 			};
 		};
@@ -80,10 +82,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6000 200>;
+			reg = <0x00006000 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <10 2>;
+			interrupts = <0x10 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY1>;
 		};
@@ -93,10 +95,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6400 200>;
+			reg = <0x00006400 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <11 2>;
+			interrupts = <0x11 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY2>;
 		};
@@ -104,23 +106,23 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			virtual-reg = <c0007808>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <c 2>;
+			interrupts = <0xc 0x2>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			virtual-reg = <c0007c08>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <d 2>;
+			interrupts = <0xd 0x2>;
 		};
 
 	  	MPIC: pic@7400 {
@@ -128,7 +130,7 @@
 			compatible = "chrp,open-pic";
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
 
@@ -138,42 +140,42 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
-			bus-range = <0 0>;
+			reg = <0x00001000 0x00001000>;
+			bus-range = <0x0 0x0>;
 			/*----------------------------------------------------+
 			| PCI memory range.
 			| 01 denotes I/O space
 			| 02 denotes 32-bit memory space
 			+----------------------------------------------------*/
-			ranges = <02000000 0 40000000 40000000 0 10000000
-				  01000000 0 00000000 7e000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <0x17 0x2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			/*----------------------------------------------------+
 			| The INTA, INTB, INTC, INTD are shared.
 			+----------------------------------------------------*/
 			interrupt-map = <
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
-
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
-
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
-
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -183,7 +185,7 @@
  				clock-frequency = <0>;
  				#address-cells = <0>;
  				#interrupt-cells = <2>;
- 				interrupts = <17 2>;
+ 				interrupts = <0x17 0x2>;
 				interrupt-parent = <&MPIC>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index cc2873a531d2..077819bc3cbd 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -12,12 +12,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,katmai";
 	compatible = "amcc,katmai";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -33,13 +35,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440SPe";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -47,14 +49,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -76,11 +78,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,22 +90,22 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440spe";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440spe";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -115,108 +117,108 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
-					 /*RXEOB*/ 1 &UIC1 7 4
-					 /*SERR*/  2 &UIC1 1 4
-					 /*TXDE*/  3 &UIC1 2 4
-					 /*RXDE*/  4 &UIC1 3 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <00000000 4 e0000000 20000000>;
+			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@10000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000200 8>;
-				virtual-reg = <a0000200>;
+				reg = <0x10000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@10000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000300 8>;
-				virtual-reg = <a0000300>;
+				reg = <0x10000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 
 			UART2: serial@10000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000600 8>;
-				virtual-reg = <a0000600>;
+				reg = <0x10000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC1>;
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 			};
 
 			IIC0: i2c@10000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000400 14>;
+				reg = <0x10000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@10000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000500 14>;
+				reg = <0x10000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			EMAC0: ethernet@10000800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <10000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x10000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "gmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
@@ -231,23 +233,23 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0xf */
-			bus-range = <0 f>;
+			bus-range = <0x0 0xf>;
 
 			/*
 			 * On Katmai, the following PCI-X interrupts signals
@@ -258,13 +260,13 @@
 			 * INTC: J2: 1-2
 			 * INTD: J1: 1-2
 			 */
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC1 14 8
-				0800 0 0 2 &UIC1 13 8
-				0800 0 0 3 &UIC1 12 8
-				0800 0 0 4 &UIC1 11 8
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
 			>;
 		};
 
@@ -275,23 +277,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 10000000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <10 1f>;
+			bus-range = <0x10 0x1f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -301,12 +303,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -316,23 +318,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 10001000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <20 2f>;
+			bus-range = <0x20 0x2f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -342,12 +344,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 4 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 5 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 6 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
 		};
 
 		PCIE2: pciex@d40000000 {
@@ -357,23 +359,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <2>; /* port number */
-			reg = <d 40000000 20000000	/* Config space access */
-			       c 10002000 00001000>;	/* Registers */
-			dcr-reg = <140 020>;
-			sdr-base = <370>;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80020000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <30 3f>;
+			bus-range = <0x30 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -383,12 +385,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 8 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 9 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 a 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 48c9a6e71f1a..dececc4b5ff2 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,kilauea";
 	compatible = "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index f869ce3ca0b7..49737589ffc8 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;		/* From U-boot */
 			bus-frequency = <0>;			/* From U-boot */
 			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -58,16 +59,16 @@
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x10 0x2>;
 		};
 
@@ -78,10 +79,51 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {					/* For TSECs */
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -89,13 +131,13 @@
 			reg = <0x24520 0x20>;
 
 			PHY1: ethernet-phy@1 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
@@ -109,7 +151,7 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY1>;
 		};
 
@@ -121,11 +163,11 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY2>;
 		};
 
-		MPIC: pic@40000 {
+		mpic: pic@40000 {
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -164,7 +206,7 @@
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
@@ -202,7 +244,7 @@
 				fsl,mdc-pin = <25>;
 
 				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&MPIC>;
+					interrupt-parent = <&mpic>;
 					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 84cc5e72ddd8..945508c7e7d8 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,makalu";
 	compatible = "amcc,makalu";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <0000003f>;	/* Start at 6 */
+				phy-map = <0x0000003f>;	/* Start at 6 */
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 94ad7b2b241e..1f9036c317b4 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,10 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		pci = &pci;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,8 +43,41 @@
 		reg = <0x00000000 0x10000000>;	// 256MB at 0
 	};
 
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		interrupt-parent = < &ipic >;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
+		interrupts = <6 8>;
+		interrupt-parent = < &ipic >;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <1>;
+		// ADS has two Hynix 512MB Nand flash chips in a single
+		// stacked package .
+		chips = <2>;
+		nand0@0 {
+			label = "nand0";
+			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
+		};
+		nand1@20000000 {
+			label = "nand1";
+			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		};
+	};
+
 	localbus@80000020 {
-		compatible = "fsl,mpc5121ads-localbus";
+		compatible = "fsl,mpc5121-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0x80000020 0x40>;
@@ -51,14 +88,51 @@
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			bank-width = <4>;
-			device-width = <1>;
+			device-width = <2>;
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
 		};
 
 		board-control@2,0 {
 			compatible = "fsl,mpc5121ads-cpld";
 			reg = <0x2 0x0 0x8000>;
 		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			interrupt-parent = < &ipic >;
+			// irq routing
+			//	all irqs but touch screen are routed to irq0 (ipic 48)
+			//	touch screen is statically routed to irq1 (ipic 17)
+			//	so don't use it here
+			interrupts = <48 0x8>;
+		};
 	};
 
 	soc@80000000 {
@@ -85,38 +159,252 @@
 			reg = <0xc00 0x100>;
 		};
 
-		// 512x PSCs are not 52xx PSCs compatible
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{  //Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+			interrupt-parent = < &ipic >;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mscan@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <0>;
+			interrupts = <12 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1300 0x80>;
+		};
+
+		mscan@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <1>;
+			interrupts = <13 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <0>;
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <1>;
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <2>;
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy >;
+			fsl,align-tx-packets = <4>;
+		};
+
+		// 5121e has two dr usb modules
+		// mpc5121_ads only uses USB0
+
+		// USB1 using external ULPI PHY
+		//usb@3000 {
+		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	reg = <0x3000 0x1000>;
+		//	#address-cells = <1>;
+		//	#size-cells = <0>;
+		//	interrupt-parent = < &ipic >;
+		//	interrupts = <43 0x8>;
+		//	dr_mode = "otg";
+		//	phy_type = "ulpi";
+		//	port1;
+		//};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			reg = <0x4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			port0;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		// 512x PSCs are not 52xx PSC compatible
 		// PSC3 serial port A aka ttyPSC0
 		serial@11300 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <0>;
 			cell-index = <3>;
 			reg = <0x11300 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
 		// PSC4 serial port B aka ttyPSC1
 		serial@11400 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <1>;
 			cell-index = <4>;
 			reg = <0x11400 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
-		pscsfifo@11f00 {
+		// PSC5 in ac97 mode
+		ac97@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			cell-index = <5>;
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl,mode = "ac97-slave";
+			rx-fifo-size = <384>;
+			tx-fifo-size = <384>;
+		};
+
+		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
-			interrupts = <0x28 0x8>;
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
 		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma2";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				// IDSEL 0x15 - Slot 1 PCI
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				// IDSEL 0x16 - Slot 2 MiniPCI
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				// IDSEL 0x17 - Slot 3 MiniPCI
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+		interrupt-parent = < &ipic >;
+		interrupts = <1 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x80008500 0x100>;
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 4936349b87cd..705c23c14f32 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -124,14 +124,12 @@
 		};
 
 	  	mpic: pic@7400 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                       	big-endian;
 		};
 		pci@1000 {
 			compatible = "tsi108-pci";
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da30c3dd..2a1929acaabd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,17 @@
 				linux,network-index = <1>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
@@ -226,22 +237,15 @@
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
-/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "fsl,mpc8272-talitos-sec2",
-			             "fsl,talitos-sec2",
-			             "fsl,talitos",
-			             "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			compatible = "fsl,sec1.0";
+			reg = <0x40000 0x13000>;
+			interrupts = <47 0x8>;
 			interrupt-parent = <&PIC>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x1010415>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca8ac39..3664fb584026 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -144,6 +144,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
@@ -219,17 +254,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ececa30f..f704513fb930 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -132,6 +132,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -206,17 +241,16 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3ab0abf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02fb3526..7345743d3d96 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -114,18 +114,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c6a7ac..e74c045a0f8c 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -79,7 +79,7 @@
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial@4600 {
@@ -89,24 +89,56 @@
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
-			interrupt-parent = <&pic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
-		pic:pic@700 {
+		ipic:pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -240,13 +272,13 @@
 			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy04:ethernet-phy@04 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x4>;
 				device_type = "ethernet-phy";
@@ -261,7 +293,7 @@
 			reg = <0x80 0x80>;
 			big-endian;
 			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 	};
 
@@ -270,21 +302,21 @@
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
-				 0x8000 0x0 0x0 0x1 &pic 17 0x8
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
 
 				/* IDSEL 0x11 AD17 (Mini1)*/
-				 0x8800 0x0 0x0 0x1 &pic 18 0x8
-				 0x8800 0x0 0x0 0x2 &pic 19 0x8
-				 0x8800 0x0 0x0 0x3 &pic 20 0x8
-				 0x8800 0x0 0x0 0x4 &pic 48 0x8
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
 
 				/* IDSEL 0x12 AD18 (PCI/Mini2) */
-				 0x9000 0x0 0x0 0x1 &pic 19 0x8
-				 0x9000 0x0 0x0 0x2 &pic 20 0x8
-				 0x9000 0x0 0x0 0x3 &pic 48 0x8
-				 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
 
-		interrupt-parent = <&pic>;
+		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0x0 0x0>;
 		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676b0b7d..8dfab5662585 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -93,6 +93,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@22000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x22000 0x1000>;
@@ -178,16 +213,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735e6e72..49ca3497eefb 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -91,6 +91,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,16 +186,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c548d8..ba586cb7afbb 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -193,20 +228,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff24e87e..3701dae1ee02 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -118,18 +118,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 000000000000..8acd1d6577f2
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2-crypto";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x7e>;
+			/*
+			 * desc mask is for rev1.x, we need runtime fixup
+			 * for >=2.x
+			 */
+			descriptor-types-mask = <0x1010ebf>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				/* filled by u-boot */
+				clock-frequency = <0>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea592574004..0a700cb5f611 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,41 +233,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
-		};
-
-		sdhc@2e000 {
-			model = "eSDHC";
-			compatible = "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <42 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
 		dma@82a8 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -303,6 +268,40 @@
 			};
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <42 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index f3083c779b66..ed137aa83d5f 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea080ad73..29c8c76a58f7 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 0e872a60e091..34a7f2f935e1 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9fd9826..d641a8985ea3 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 1eb8defaff6f..e4d7030d50e5 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
new file mode 100644
index 000000000000..02cfa24a1695
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 00000000>;	// Filled by U-Boot
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <14 0x2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <15 0x2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <16 0x2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <17 0x2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@26000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@ffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe08000 0x1000>;
+	};
+
+	pci1: pcie@ffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		cell-index = <2>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		cell-index = <3>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0b000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 18033ed0b535..f2273a872b11 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,14 +207,12 @@
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 663c7c50ca45..c4469f19ff82 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6a0d8db96d97..7d3829d3495e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -41,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -65,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -209,15 +210,40 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4811b8107415..d84466bb7eca 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -45,6 +45,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -68,7 +69,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -99,6 +100,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -207,15 +249,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index b025c566c10d..e03a78006283 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 0cc16ab305d1..ba8159de040b 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -64,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -73,6 +73,47 @@
 			interrupts = <16 2>;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,6 +175,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a025a8ededc5..9c30a34821dc 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -70,7 +71,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -106,6 +107,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -189,27 +231,23 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0xf000>;
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0xfe>;
-			descriptor-types-mask = <0x12b0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		par_io@e0100 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 66f27ab613a2..08c61e3daecc 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 
 		PowerPC,8572@1 {
@@ -54,6 +55,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -84,7 +86,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -115,6 +117,88 @@
 			dfsrr;
 		};
 
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -221,15 +305,41 @@
 			fsl,has-rstcr;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index fa9b6bbeb5af..981941e5d7a5 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -172,14 +172,28 @@
 		};
 
 		mpic: interrupt-controller@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {
@@ -349,7 +363,7 @@
 			0xe000 0 0 4 &mpic 1 1
 
 			/* IDSEL 0x1f */
-			0xf800 0 0 1 &mpic 3 0
+			0xf800 0 0 1 &mpic 3 2
 			0xf800 0 0 2 &mpic 0 1
 		>;
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 1e4bfe9cadb9..ae08761ffff1 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -239,14 +280,12 @@
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 
 		global-utilities@e0000 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c997da..bd700651f360 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,17 @@
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043722b9..b123e9f7a5a8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,17 @@
 				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
index 379ded282d5e..96ba5b512afe 100644
--- a/arch/powerpc/boot/dts/ps3.dts
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -18,6 +18,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/dts-v1/;
+
 / {
 	model = "SonyPS3";
 	compatible = "sony,ps3";
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0 0>;
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
 	};
 
 	/*
@@ -55,14 +57,14 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			ibm,ppc-interrupt-server#s = <0 1>;
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
 			clock-frequency = <0>;
 			timebase-frequency = <0>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
-			i-cache-line-size = <80>;
-			d-cache-line-size = <80>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index 6a8fa7089ea2..9684c80e4093 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,rainier";
 	compatible = "amcc,rainier";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GRx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,80 +107,80 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440grx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440grx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -187,69 +189,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440grx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -257,23 +259,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -286,23 +288,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -319,24 +321,25 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
new file mode 100644
index 000000000000..f0663be10421
--- /dev/null
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b7d6a7..45f789b56709 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -186,19 +221,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 22d967178fe9..333552b4e90d 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -44,6 +44,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -161,7 +162,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -192,6 +193,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -262,15 +304,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 0476802fba60..db3632ef9888 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -43,6 +43,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -66,7 +67,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -97,6 +98,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -155,8 +197,8 @@
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
+			compatible = "chrp,open-pic";
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec157b3..9652456158fb 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d67564bdfc..72d15f075d34 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,sequoia";
 	compatible = "amcc,sequoia";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EPx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,44 +107,44 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		USB1: usb@e0000400 {
 			compatible = "ohci-be";
-			reg = <0 e0000400 60>;
+			reg = <0x00000000 0xe0000400 0x00000060>;
 			interrupt-parent = <&UIC0>;
-			interrupts = <15 8>;
+			interrupts = <0x15 0x8>;
 		};
 
 		USB0: ehci@e0000300 {
 			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
 			interrupt-parent = <&UIC0>;
-			interrupts = <1a 4>;
-			reg = <0 e0000300 90 0 e0000390 70>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
 			big-endian;
 		};
 
@@ -150,50 +152,50 @@
 		  	compatible = "ibm,opb-440epx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440epx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -202,69 +204,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440epx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -272,23 +274,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -301,23 +303,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -334,10 +336,10 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
@@ -347,16 +349,16 @@
 			 * I/O              1 E800 0000     1 E800 FFFF     64KB
 			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 40000000
-				01000000 0 00000000 1 e8000000 0 00010000
-				01000000 0 00000000 1 e8800000 0 03800000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index 5893816c0bce..eab680ce10da 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -95,6 +95,7 @@
 
 		mpic: interrupt-controller@40000 {
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index f81fd7fdb29e..fcd1db6ca0a8 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -38,6 +38,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -62,7 +63,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -82,6 +83,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -131,6 +173,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index e808e1c5593a..058438f9629b 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -10,12 +10,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,taishan";
 	compatible = "amcc,taishan";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC2;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GX";
-			reg = <0>;
-			clock-frequency = <2FAF0800>; // 800MHz
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,7 +47,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 
@@ -53,7 +55,7 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <200 009>;
+		dcr-reg = <0x200 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <01 4 00 4>; /* cascade - first non-critical */
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
 		interrupt-parent = <&UICB0>;
 
 	};
@@ -77,11 +79,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <03 4 02 4>; /* cascade */
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
@@ -89,29 +91,29 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <2>; /* was 1 */
-		dcr-reg = <210 009>;
+		dcr-reg = <0x210 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <05 4 04 4>; /* cascade */
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
 	L2C0: l2c {
 		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
-		dcr-reg = <20 8			/* Internal SRAM DCR's */
-			   30 8>;		/* L2 cache DCR's */
-		cache-line-size = <20>;		/* 32 bytes */
-		cache-size = <40000>;		/* L2, 256K */
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
 		interrupt-parent = <&UIC2>;
-		interrupts = <17 1>;
+		interrupts = <0x17 0x1>;
 	};
 
 	plb {
@@ -119,41 +121,41 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges;
-		clock-frequency = <9896800>; // 160MHz
+		clock-frequency = <160000000>; // 160MHz
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -162,29 +164,56 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
-			clock-frequency = <4C4B400>; // 80MHz
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
 
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
-				clock-frequency = <4C4B400>; // 80MHz
+				clock-frequency = <80000000>; // 80MHz
 
 				/* ranges property is supplied by zImage
 				 * based on firmware's configuration of the
 				 * EBC bridge */
 
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
-				/* TODO: Add other EBC devices */
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
 			};
 
 
@@ -192,103 +221,103 @@
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
- 				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gx", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@40000790 {
 				compatible = "ibm,rgmii";
-				reg = <40000790 8>;
+				reg = <0x40000790 0x00000008>;
 			};
 
 			TAH0: emac-tah@40000b50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000b50 30>;
+				reg = <0x40000b50 0x00000030>;
 			};
 
 			TAH1: emac-tah@40000d50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000d50 30>;
+				reg = <0x40000d50 0x00000030>;
 			};
 
 			EMAC0: ethernet@40000800 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 		 	EMAC1: ethernet@40000900 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -297,18 +326,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <0 4 1 4>;
-				reg = <40000c00 70>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
@@ -321,18 +350,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <2 4 3 4>;
-				reg = <40000e00 70>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000003>;
+				phy-map = <0x00000003>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
@@ -344,9 +373,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -360,34 +389,34 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <2 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000   4   /* Special cycles */
-			       2 0ec80000 100	/* Internal registers */
-			       2 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC0 17 8
-				0800 0 0 2 &UIC0 18 8
-				0800 0 0 3 &UIC0 19 8
-				0800 0 0 4 &UIC0 1a 8
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 1 &UIC0 18 8
-				1000 0 0 2 &UIC0 19 8
-				1000 0 0 3 &UIC0 1a 8
-				1000 0 0 4 &UIC0 17 8
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 773a68e00058..3008bf8830c1 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -70,6 +70,20 @@
 			fsl,has-wdt;
 		};
 
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x980 0x80>;
+		};
+
 		gpio@b00 {
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 1addb3ae719e..e1d260b9085e 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8540";
-	compatible = "tqm,8540", "tqm,85xx";
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +90,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -177,6 +219,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 9e01093f496e..d76441ec5dc7 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8541";
-	compatible = "tqm,8541", "tqm,85xx";
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
new file mode 100644
index 000000000000..64d2d5bbcdf1
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -0,0 +1,406 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		reg = <0xa0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
new file mode 100644
index 000000000000..2563112cabd3
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,411 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index a20eb06c482f..6f7ea59c4846 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8555";
-	compatible = "tqm,8555", "tqm,85xx";
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b9ac6c943b89..3fe35208907b 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -2,6 +2,7 @@
  * TQM 8560 Device Tree Source
  *
  * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -12,8 +13,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8560";
-	compatible = "tqm,8560", "tqm,85xx";
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +91,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,6 +188,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
@@ -221,6 +265,70 @@
 		};
 	};
 
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
 	pci0: pci@e0008000 {
 		cell-index = <0>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
new file mode 100644
index 000000000000..dc8e78e2dceb
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -0,0 +1,296 @@
+/*
+ * This file supports the Xilinx ML507 board with the 440 processor.
+ * A reference design for the FPGA is provided at http://git.xilinx.com.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	model = "testing";
+	DDR2_SDRAM: memory@0 {
+		device_type = "memory";
+		reg = < 0 0x10000000 >;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			clock-frequency = <400000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <400000000>;
+			xlnx,apu-control = <1>;
+			xlnx,apu-udi-0 = <0>;
+			xlnx,apu-udi-1 = <0>;
+			xlnx,apu-udi-10 = <0>;
+			xlnx,apu-udi-11 = <0>;
+			xlnx,apu-udi-12 = <0>;
+			xlnx,apu-udi-13 = <0>;
+			xlnx,apu-udi-14 = <0>;
+			xlnx,apu-udi-15 = <0>;
+			xlnx,apu-udi-2 = <0>;
+			xlnx,apu-udi-3 = <0>;
+			xlnx,apu-udi-4 = <0>;
+			xlnx,apu-udi-5 = <0>;
+			xlnx,apu-udi-6 = <0>;
+			xlnx,apu-udi-7 = <0>;
+			xlnx,apu-udi-8 = <0>;
+			xlnx,apu-udi-9 = <0>;
+			xlnx,dcr-autolock-enable = <1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0>;
+			xlnx,dcu-rd-touch-plb-prio = <0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0>;
+			xlnx,dcu-wr-flush-plb-prio = <0>;
+			xlnx,dcu-wr-store-plb-prio = <0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0>;
+			xlnx,dma0-control = <0>;
+			xlnx,dma0-plb-prio = <0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0>;
+			xlnx,dma1-plb-prio = <0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0>;
+			xlnx,dma2-plb-prio = <0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0>;
+			xlnx,dma3-plb-prio = <0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0>;
+			xlnx,generate-plb-timespecs = <1>;
+			xlnx,icu-rd-fetch-plb-prio = <0>;
+			xlnx,icu-rd-spec-plb-prio = <0>;
+			xlnx,icu-rd-touch-plb-prio = <0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <1>;
+			xlnx,mplb-arb-mode = <0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0>;
+			xlnx,mplb-prio-dcur = <2>;
+			xlnx,mplb-prio-dcuw = <3>;
+			xlnx,mplb-prio-icu = <4>;
+			xlnx,mplb-prio-splb0 = <1>;
+			xlnx,mplb-prio-splb1 = <0>;
+			xlnx,mplb-read-pipe-enable = <1>;
+			xlnx,mplb-sync-tattribute = <0>;
+			xlnx,mplb-wdog-enable = <1>;
+			xlnx,mplb-write-pipe-enable = <1>;
+			xlnx,mplb-write-post-enable = <1>;
+			xlnx,num-dma = <1>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0>;
+			xlnx,ppc440mc-addr-high = <0xfffffff>;
+			xlnx,ppc440mc-arb-mode = <0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <8>;
+			xlnx,ppc440mc-prio-dcur = <2>;
+			xlnx,ppc440mc-prio-dcuw = <3>;
+			xlnx,ppc440mc-prio-icu = <4>;
+			xlnx,ppc440mc-prio-splb0 = <1>;
+			xlnx,ppc440mc-prio-splb1 = <0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+			xlnx,ppcdm-asyncmode = <0>;
+			xlnx,ppcds-asyncmode = <0>;
+			xlnx,user-reset = <0>;
+			DMA0: sdma@80 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				dcr-reg = < 0x80 0x11 >;
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 9 2 0xa 2 >;
+			} ;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+		ranges ;
+		DIP_Switches_8Bit: gpio@81460000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81460000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&DMA0>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <1>;
+				xlnx,phy-type = <1>;
+				xlnx,phyaddr = <1>;
+				xlnx,rxcsum = <1>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0>;
+				xlnx,txcsum = <1>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_Positions: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Push_Buttons_5Bit: gpio@81440000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81440000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+			current-speed = <0x2580>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <3>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0>;
+			xlnx,has-external-xin = <0>;
+			xlnx,is-a-16550 = <1>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xb>;
+		} ;
+		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 2 0 1 2 >;
+			reg = < 0x83a00000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,wdt-enable-once = <0>;
+			xlnx,wdt-interval = <0x1e>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <1>;
+			xlnx,gen1-assert = <1>;
+			xlnx,one-timer-only = <1>;
+			xlnx,trig0-assert = <1>;
+			xlnx,trig1-assert = <1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index a328607c8f84..4a9f726ada13 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ibm,walnut";
 	compatible = "ibm,walnut";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,63 +67,63 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
@@ -129,26 +131,26 @@
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			/* The ranges property is supplied by the bootwrapper
@@ -158,18 +160,18 @@
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			sram@0,0 {
-				reg = <0 0 80000>;
+				reg = <0x00000000 0x00000000 0x00080000>;
 			};
 
 			flash@0,80000 {
 				compatible = "jedec-flash";
 				bank-width = <1>;
-				reg = <0 80000 80000>;
+				reg = <0x00000000 0x00080000 0x00080000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				partition@0 {
 					label = "OpenBIOS";
-					reg = <0 80000>;
+					reg = <0x00000000 0x00080000>;
 					read-only;
 				};
 			};
@@ -177,24 +179,24 @@
 			nvram@1,0 {
 				/* NVRAM and RTC */
 				compatible = "ds1743-nvram";
-				#bytes = <2000>;
-				reg = <1 0 2000>;
+				#bytes = <0x2000>;
+				reg = <0x00000001 0x00000000 0x00002000>;
 			};
 
 			keyboard@2,0 {
 				compatible = "intel,82C42PC";
-				reg = <2 0 2>;
+				reg = <0x00000002 0x00000000 0x00000002>;
 			};
 
 			ir@3,0 {
 				compatible = "ti,TIR2000PAG";
-				reg = <3 0 10>;
+				reg = <0x00000003 0x00000000 0x00000010>;
 			};
 
 			fpga@7,0 {
 				compatible = "Walnut-FPGA";
-				reg = <7 0 10>;
-				virtual-reg = <f0300005>;
+				reg = <0x00000007 0x00000000 0x00000010>;
+				virtual-reg = <0xf0300005>;
 			};
 		};
 
@@ -205,35 +207,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Walnut has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1d 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1e 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1f 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e22bf5..340018cf16b7 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "pika,warp";
 	compatible = "pika,warp";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,22 +61,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -86,86 +88,79 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				fpga@2,0 {
 					compatible = "pika,fpga";
-			   		reg = <2 0 2200>;
-					interrupts = <18 8>;
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00000A00>;
+				};
+
 				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
+					compatible = "amd,s29gl032a", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 0 4000000>;
+					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0 180000>;
-					};
-					partition@180000 {
-						label = "root";
-						reg = <180000 3480000>;
-					};
-					partition@3600000 {
-						label = "user";
-						reg = <3600000 900000>;
-					};
-					partition@3f00000 {
+					partition@300000 {
 						label = "fpga";
-						reg = <3f00000 40000>;
+						reg = <0x0030000 0x00040000>;
 					};
-					partition@3f40000 {
+					partition@340000 {
 						label = "env";
-						reg = <3f40000 40000>;
+						reg = <0x0340000 0x00040000>;
 					};
-					partition@3f80000 {
+					partition@380000 {
 						label = "u-boot";
-						reg = <3f80000 80000>;
+						reg = <0x0380000 0x00080000>;
 					};
 				};
 			};
@@ -173,60 +168,80 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
+				index = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600b00 48>;
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600c00 48>;
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				led@31 {
+					compatible = "linux,gpio-led";
+					linux,name = ":green:";
+					gpios = <&GPIO1 0x30 0>;
+				};
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 0d6d332814e0..e39422aa0d85 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
 	compatible = "amcc,yosemite","amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -63,22 +65,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -90,29 +92,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -122,110 +124,110 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-			ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 				status = "disabled";
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <4 4>;
+				interrupts = <0x4 0x4>;
 				status = "disabled";
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			spi@ef600900 {
 				compatible = "amcc,spi-440ep";
-				reg = <ef600900 6>;
-				interrupts = <8 4>;
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
 				interrupt-parent = <&UIC0>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -234,26 +236,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 4 9 4>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -265,35 +267,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index 95b8fd69a403..b0ec9cf3eaaf 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -168,8 +168,19 @@ void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
 
 void *of_vmlinux_alloc(unsigned long size)
 {
-	void *p = malloc(size);
-
+	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
+	void *addr;
+	void *p;
+
+	/* With some older POWER4 firmware we need to claim the area the kernel
+	 * will reside in.  Newer firmwares don't need this so we just ignore
+	 * the return value.
+	 */
+	addr = of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	       start, end, end - start, addr);
+
+	p = malloc(size);
 	if (!p)
 		fatal("Can't allocate memory for kernel image!\n\r");
 
diff --git a/arch/powerpc/boot/redboot-83xx.c b/arch/powerpc/boot/redboot-83xx.c
new file mode 100644
index 000000000000..79aa9e151fa7
--- /dev/null
+++ b/arch/powerpc/boot/redboot-83xx.c
@@ -0,0 +1,60 @@
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x)	((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+	void *node;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node) {
+		printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+		       bd.bi_busfreq, MHZ(bd.bi_busfreq));
+		setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
+	}
+
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	memcpy(&bd, (char *)r3, sizeof(bd));
+
+	if (bd.bi_tag != 0x42444944)
+		return;
+
+	simple_alloc_init(_end,
+			  bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+			  32, 64);
+
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+
+	loader_info.cmdline = (char *)bd.bi_cmdline;
+	loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index 86cd285bccc6..c58a0dada992 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -23,6 +23,8 @@
 
 BSS_STACK(4*1024);
 
+extern int platform_specific_init(void) __attribute__((weak));
+
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		   unsigned long r6, unsigned long r7)
 {
@@ -80,5 +82,9 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	/* prepare the device tree and find the console */
 	fdt_init(_dtb_start);
+
+	if (platform_specific_init)
+		platform_specific_init();
+
 	serial_console_init();
 }
diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c
new file mode 100644
index 000000000000..f622805f8000
--- /dev/null
+++ b/arch/powerpc/boot/virtex.c
@@ -0,0 +1,100 @@
+/*
+ * The platform specific code for virtex devices since a boot loader is not
+ * always used.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "stdio.h"
+
+#define UART_DLL		0	/* Out: Divisor Latch Low */
+#define UART_DLM		1	/* Out: Divisor Latch High */
+#define UART_FCR		2	/* Out: FIFO Control Register */
+#define UART_FCR_CLEAR_RCVR 	0x02 	/* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 	/* Clear the XMIT FIFO */
+#define UART_LCR		3	/* Out: Line Control Register */
+#define UART_MCR		4	/* Out: Modem Control Register */
+#define UART_MCR_RTS		0x02 	/* RTS complement */
+#define UART_MCR_DTR		0x01 	/* DTR complement */
+#define UART_LCR_DLAB		0x80 	/* Divisor latch access bit */
+#define UART_LCR_WLEN8		0x03 	/* Wordlength: 8 bits */
+
+static int virtex_ns16550_console_init(void *devp)
+{
+	unsigned char *reg_base;
+	u32 reg_shift, reg_offset, clk, spd;
+	u16 divisor;
+	int n;
+
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
+
+	n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
+	if (n == sizeof(reg_offset))
+		reg_base += reg_offset;
+
+	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
+	if (n != sizeof(reg_shift))
+		reg_shift = 0;
+
+	n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd));
+	if (n != sizeof(spd))
+		spd = 9600;
+
+	/* should there be a default clock rate?*/
+	n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk));
+	if (n != sizeof(clk))
+		return -1;
+
+	divisor = clk / (16 * spd);
+
+	/* Access baud rate */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB);
+
+	/* Baud rate based on input clock */
+	out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF);
+	out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8);
+
+	/* 8 data, 1 stop, no parity */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8);
+
+	/* RTS/DTR */
+	out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR);
+
+	/* Clear transmitter and receiver */
+	out_8(reg_base + (UART_FCR << reg_shift),
+				UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
+	return 0;
+}
+
+/* For virtex, the kernel may be loaded without using a bootloader and if so
+   some UARTs need more setup than is provided in the normal console init
+*/
+int platform_specific_init(void)
+{
+	void *devp;
+	char devtype[MAX_PROP_LEN];
+	char path[MAX_PATH_LEN];
+
+	devp = finddevice("/chosen");
+	if (devp == NULL)
+		return -1;
+
+	if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
+		devp = finddevice(path);
+		if (devp == NULL)
+			return -1;
+
+		if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+				&& !strcmp(devtype, "serial")
+				&& (dt_is_compatible(devp, "ns16550")))
+				virtex_ns16550_console_init(devp);
+	}
+	return 0;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d6c96d9ab291..644bf9d4ea00 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -138,14 +138,20 @@ objflags=-S
 tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
+link_address='0x400000'
 
 case "$platform" in
-pmac|pseries|chrp)
+pseries)
+    platformo=$object/of.o
+    link_address='0x4000000'
+    ;;
+pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
     platformo=$object/of.o
     lds=$object/zImage.coff.lds
+    link_address='0x500000'
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -171,13 +177,13 @@ cuboot*)
     *-mpc824*)
         platformo=$object/cuboot-824x.o
         ;;
-    *-mpc83*)
+    *-mpc83*|*-asp834x*)
         platformo=$object/cuboot-83xx.o
         ;;
     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*|*-tqm8540|*-sbc85*)
+    *-mpc85*|*-tqm85*|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
@@ -190,6 +196,7 @@ ps3)
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
+    link_address=''
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -200,7 +207,19 @@ adder875-redboot)
     binary=y
     ;;
 simpleboot-virtex405-*)
-    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-virtex440-*)
+    platformo="$object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-*)
+    platformo="$object/simpleboot.o"
+    binary=y
+    ;;
+asp834x-redboot)
+    platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
 esac
@@ -268,7 +287,10 @@ if [ -n "$dtb" ]; then
 fi
 
 if [ "$platform" != "miboot" ]; then
-    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+    if [ -n "$link_address" ] ; then
+        text_start="-Ttext $link_address --defsym _start=$link_address"
+    fi
+    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index fe87a90ce7f1..856dc78b14ef 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  . = (5*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index f6e380fdb388..0962d62bdb50 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  . = (4*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
new file mode 100644
index 000000000000..9ce5cbc2a4e7
--- /dev/null
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -0,0 +1,1192 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon May  5 13:43:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+CONFIG_SAM440EP=y
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_440EP=y
+CONFIG_IBM440EP_ERR42=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 087aedce1338..e53c92655bd6 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -348,7 +348,83 @@ CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -660,6 +736,7 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
new file mode 100644
index 000000000000..9c41f66b5a7d
--- /dev/null
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -0,0 +1,1107 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 15:36:41 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
new file mode 100644
index 000000000000..d2c435f0da42
--- /dev/null
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -0,0 +1,1128 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Mon May 19 21:12:32 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+CONFIG_MPC836x_RDK=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+CONFIG_UGETH_NAPI=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
new file mode 100644
index 000000000000..b3b770be3cc9
--- /dev/null
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -0,0 +1,1225 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Thu Jun 26 14:40:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+CONFIG_TQM8548=y
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_FSL_UPM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/asp8347_defconfig
new file mode 100644
index 000000000000..60bb4d106c87
--- /dev/null
+++ b/arch/powerpc/configs/asp8347_defconfig
@@ -0,0 +1,1214 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Tue May  6 02:21:00 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
new file mode 100644
index 000000000000..dc599c7e97d5
--- /dev/null
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -0,0 +1,1872 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Thu May 15 11:00:14 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_CHECK_CACHE_COHERENCY=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+# CONFIG_PPC_PRPMC2800 is not set
+CONFIG_PPC_C2K=y
+CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=m
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_ISDN=m
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+# CONFIG_ISDN_PPP_BSDCOMP is not set
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DRV_LOOP=m
+# CONFIG_ISDN_DIVERSION is not set
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFC4S8S is not set
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+# CONFIG_ISDN_DRV_GIGASET is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MPSC=y
+CONFIG_SERIAL_MPSC_CONSOLE=y
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_NVRAM=m
+CONFIG_GEN_RTC=m
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+# CONFIG_SENSORS_ADM1029 is not set
+CONFIG_SENSORS_ADM1031=m
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+CONFIG_SENSORS_GL518SM=m
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1619=m
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+CONFIG_SENSORS_SMSC47M1=m
+# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+CONFIG_SENSORS_VIA686A=m
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SENSORS_W83627HF=m
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MV64X60_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc8536_ds_defconfig
new file mode 100644
index 000000000000..f1e2931de5da
--- /dev/null
+++ b/arch/powerpc/configs/mpc8536_ds_defconfig
@@ -0,0 +1,1637 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 01:34:26 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8536_DS=y
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=524288
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 12f9b5a80220..f9d279bb700b 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Sat Apr  5 09:35:48 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  9 13:50:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -115,12 +118,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -157,6 +162,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 CONFIG_EBONY=y
+CONFIG_SAM440EP=y
 CONFIG_SEQUOIA=y
 CONFIG_TAISHAN=y
 CONFIG_KATMAI=y
@@ -164,6 +170,7 @@ CONFIG_RAINIER=y
 CONFIG_WARP=y
 CONFIG_CANYONLANDS=y
 CONFIG_YOSEMITE=y
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
 CONFIG_440EP=y
 CONFIG_440EPX=y
 CONFIG_440GRX=y
@@ -172,6 +179,8 @@ CONFIG_440GX=y
 CONFIG_440SPe=y
 CONFIG_460EX=y
 CONFIG_IBM440EP_ERR42=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -220,13 +229,16 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -246,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -255,13 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
 
 #
 # Networking
@@ -303,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -366,6 +377,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -478,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -528,7 +544,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -546,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -553,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -579,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,22 +629,19 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -639,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,6 +696,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -679,14 +706,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -701,7 +725,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -770,7 +793,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -798,6 +820,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -818,6 +841,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -828,6 +852,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -840,6 +865,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -851,6 +877,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -861,50 +890,80 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index adaa05fb0478..fe6ffa683d78 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -946,6 +946,7 @@ CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index f3f5e2641432..bf0b1fd0ec34 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -50,12 +50,13 @@ obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
 				   swsusp_$(CONFIG_WORD_SIZE).o
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
-obj-$(CONFIG_MODULES)		+= module_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index e06f75daeba3..367129789cc0 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -48,6 +48,7 @@ struct aligninfo {
 #define HARD	0x80	/* string, stwcx. */
 #define E4	0x40	/* SPE endianness is word */
 #define E8	0x80	/* SPE endianness is double word */
+#define SPLT	0x80	/* VSX SPLAT load */
 
 /* DSISR bits reported for a DCBZ instruction: */
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
@@ -363,10 +364,10 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
  * Only POWER6 has these instructions, and it does true little-endian,
  * so we don't need the address swizzling.
  */
-static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr,
-			   unsigned int reg, unsigned int flags)
+static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
+			   unsigned int flags)
 {
-	char *ptr = (char *) &current->thread.fpr[reg];
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
 	int i, ret;
 
 	if (!(flags & F))
@@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 }
 #endif /* CONFIG_SPE */
 
+#ifdef CONFIG_VSX
+/*
+ * Emulate VSX instructions...
+ */
+static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
+		       unsigned int areg, struct pt_regs *regs,
+		       unsigned int flags, unsigned int length)
+{
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
+	int ret;
+
+	flush_vsx_to_thread(current);
+
+	if (flags & ST)
+		ret = __copy_to_user(addr, ptr, length);
+        else {
+		if (flags & SPLT){
+			ret = __copy_from_user(ptr, addr, length);
+			ptr += length;
+		}
+		ret |= __copy_from_user(ptr, addr, length);
+	}
+	if (flags & U)
+		regs->gpr[areg] = regs->dar;
+	if (ret)
+		return -EFAULT;
+	return 1;
+}
+#endif
+
 /*
  * Called on alignment exception. Attempts to fixup
  *
@@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 
 int fix_alignment(struct pt_regs *regs)
 {
-	unsigned int instr, nb, flags;
+	unsigned int instr, nb, flags, instruction = 0;
 	unsigned int reg, areg;
 	unsigned int dsisr;
 	unsigned char __user *addr;
@@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
 			instr = cpu_to_le32(instr);
 		dsisr = make_dsisr(instr);
+		instruction = instr;
 	}
 
 	/* extract the operation and registers from the dsisr */
@@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs)
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
+#ifdef CONFIG_VSX
+	if ((instruction & 0xfc00003e) == 0x7c000018) {
+		/* Additional register addressing bit (64 VSX vs 32 FPR/GPR */
+		reg |= (instruction & 0x1) << 5;
+		/* Simple inline decoder instead of a table */
+		if (instruction & 0x200)
+			nb = 16;
+		else if (instruction & 0x080)
+			nb = 8;
+		else
+			nb = 4;
+		flags = 0;
+		if (instruction & 0x100)
+			flags |= ST;
+		if (instruction & 0x040)
+			flags |= U;
+		/* splat load needs a special decoder */
+		if ((instruction & 0x400) == 0){
+			flags |= SPLT;
+			nb = 8;
+		}
+		return emulate_vsx(addr, reg, areg, regs, flags, nb);
+	}
+#endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
 	 */
@@ -759,7 +815,7 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16)
-		return emulate_fp_pair(regs, addr, reg, flags);
+		return emulate_fp_pair(addr, reg, flags);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
@@ -784,7 +840,7 @@ int fix_alignment(struct pt_regs *regs)
 				return -EFAULT;
 		}
 	} else if (flags & F) {
-		data.dd = current->thread.fpr[reg];
+		data.dd = current->thread.TS_FPR(reg);
 		if (flags & S) {
 			/* Single-precision FP store requires conversion... */
 #ifdef CONFIG_PPC_FPU
@@ -862,7 +918,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (unlikely(ret))
 			return -EFAULT;
 	} else if (flags & F)
-		current->thread.fpr[reg] = data.dd;
+		current->thread.TS_FPR(reg) = data.dd;
 	else
 		regs->gpr[reg] = data.ll;
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ec9228d687b0..92768d3006f7 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,6 +52,10 @@
 #include <asm/iseries/alpaca.h>
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include "head_booke.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -74,6 +78,10 @@ int main(void)
 	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
+	DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
 #else /* CONFIG_PPC64 */
@@ -242,6 +250,25 @@ int main(void)
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
+	DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	/* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
+	DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
+	DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
+	DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
+	DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
+	DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
+	DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
+	DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
+	DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
+	DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
+	DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
+	DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
+	DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
+#endif
+
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index e3623e3e3451..5465e8de0e61 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -33,6 +33,7 @@ _GLOBAL(__setup_cpu_440grx)
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
 	b	__init_fpu_44x
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e44d5530f0a6..f7f3c215d06f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -37,6 +37,7 @@ extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -52,6 +53,8 @@ extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
+extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power7(void);
 #endif /* CONFIG_PPC64 */
 
 /* This table only contains "desktop" CPUs, it need to be filled with embedded
@@ -67,7 +70,12 @@ extern void __restore_cpu_ppc970(void);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
-				 PPC_FEATURE_TRUE_LE)
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER7	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
@@ -380,6 +388,37 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power6",
 	},
+	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x0f000003,
+		.cpu_name		= "POWER7 (architected)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_generic,
+		.platform		= "power7",
+	},
+	{	/* Power7 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003f0000,
+		.cpu_name		= "POWER7 (raw)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
+		.oprofile_cpu_type	= "ppc64/power7",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
+		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
+		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
+			POWER6_MMCRA_OTHER,
+		.platform		= "power7",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,
@@ -1410,6 +1449,16 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 440 in Xilinx Virtex-5 FXT */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x7ff21910,
+		.cpu_name		= "440 in Virtex-5 FXT",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.platform		= "ppc440",
+	},
 	{ /* 460EX */
 		.pvr_mask		= 0xffff0002,
 		.pvr_value		= 0x13020002,
@@ -1427,9 +1476,10 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_value		= 0x13020000,
 		.cpu_name		= "460GT",
 		.cpu_features		= CPU_FTRS_44X,
-		.cpu_user_features	= COMMON_USER_BOOKE,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
@@ -1491,7 +1541,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80200000,
 		.cpu_name		= "e500",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1508,7 +1557,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80210000,
 		.cpu_name		= "e500v2",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500_2,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1522,6 +1570,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
 	},
+	{	/* e500mc */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80230000,
+		.cpu_name		= "e500mc",
+		.cpu_features		= CPU_FTRS_E500MC,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
+		.machine_check		= machine_check_e500,
+		.platform		= "ppce500mc",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1587,38 +1649,3 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 	BUG();
 	return NULL;
 }
-
-void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
-{
-	struct fixup_entry {
-		unsigned long	mask;
-		unsigned long	value;
-		long		start_off;
-		long		end_off;
-	} *fcur, *fend;
-
-	fcur = fixup_start;
-	fend = fixup_end;
-
-	for (; fcur < fend; fcur++) {
-		unsigned int *pstart, *pend, *p;
-
-		if ((value & fcur->mask) == fcur->value)
-			continue;
-
-		/* These PTRRELOCs will disappear once the new scheme for
-		 * modules and vdso is implemented
-		 */
-		pstart = ((unsigned int *)fcur) + (fcur->start_off / 4);
-		pend = ((unsigned int *)fcur) + (fcur->end_off / 4);
-
-		for (p = pstart; p < pend; p++) {
-			*p = 0x60000000u;
-			asm volatile ("dcbst 0, %0" : : "r" (p));
-		}
-		asm volatile ("sync" : : : "memory");
-		for (p = pstart; p < pend; p++)
-			asm volatile ("icbi 0,%0" : : "r" (p));
-		asm volatile ("sync; isync" : : : "memory");
-	}
-}
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index eae401de3f76..0a8439aafdd1 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -48,7 +48,7 @@ int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
 cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
-#define CRASH_HANDLER_MAX 1
+#define CRASH_HANDLER_MAX 2
 /* NULL terminated list of shutdown handles */
 static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
 static DEFINE_SPINLOCK(crash_handlers_lock);
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 9ee3c5278db0..e0debcca0bfa 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -14,6 +14,7 @@
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
 #include <linux/lmb.h>
+#include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
 #include <asm/firmware.h>
@@ -33,6 +34,8 @@ void __init reserve_kdump_trampoline(void)
 
 static void __init create_trampoline(unsigned long addr)
 {
+	unsigned int *p = (unsigned int *)addr;
+
 	/* The maximum range of a single instruction branch, is the current
 	 * instruction's address + (32 MB - 4) bytes. For the trampoline we
 	 * need to branch to current address + 32 MB. So we insert a nop at
@@ -41,8 +44,8 @@ static void __init create_trampoline(unsigned long addr)
 	 * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
 	 * two instructions it doesn't require any registers.
 	 */
-	create_instruction(addr, 0x60000000); /* nop */
-	create_branch(addr + 4, addr + PHYSICAL_START, 0);
+	patch_instruction(p, PPC_NOP_INSTR);
+	patch_branch(++p, addr + PHYSICAL_START, 0);
 }
 
 void __init setup_kdump_trampoline(void)
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
index 3a317cb0636a..ae5708e3a312 100644
--- a/arch/powerpc/kernel/dma_64.c
+++ b/arch/powerpc/kernel/dma_64.c
@@ -15,15 +15,6 @@
  * Generic iommu implementation
  */
 
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -50,32 +41,38 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
  */
 static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
 				       size_t size,
-				       enum dma_data_direction direction)
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
 {
 	return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
-			        device_to_mask(dev), direction);
+				device_to_mask(dev), direction, attrs);
 }
 
 
 static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
 				   size_t size,
-				   enum dma_data_direction direction)
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
 {
-	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction);
+	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
+			   attrs);
 }
 
 
 static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, sglist, nelems,
-			    device_to_mask(dev), direction);
+	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+			    device_to_mask(dev), direction, attrs);
 }
 
 static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction);
+	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -148,19 +145,22 @@ static void dma_direct_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
 					size_t size,
-					enum dma_data_direction direction)
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
 {
 	return virt_to_abs(ptr) + get_dma_direct_offset(dev);
 }
 
 static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
 				    size_t size,
-				    enum dma_data_direction direction)
+				    enum dma_data_direction direction,
+				    struct dma_attrs *attrs)
 {
 }
 
 static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -174,7 +174,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 }
 
 static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
 }
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 7231a708af0d..da52269aec1e 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -45,29 +45,54 @@
 #endif
 
 #ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
 	.globl	mcheck_transfer_to_handler
 mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_DSRR0
+	stw	r0,_DSRR0(r11)
+	mfspr	r0,SPRN_DSRR1
+	stw	r0,_DSRR1(r11)
+	/* fall through */
 
 	.globl	debug_transfer_to_handler
 debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_CSRR0
+	stw	r0,_CSRR0(r11)
+	mfspr	r0,SPRN_CSRR1
+	stw	r0,_CSRR1(r11)
+	/* fall through */
 
 	.globl	crit_transfer_to_handler
 crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
+#ifdef CONFIG_FSL_BOOKE
+	mfspr	r0,SPRN_MAS0
+	stw	r0,MAS0(r11)
+	mfspr	r0,SPRN_MAS1
+	stw	r0,MAS1(r11)
+	mfspr	r0,SPRN_MAS2
+	stw	r0,MAS2(r11)
+	mfspr	r0,SPRN_MAS3
+	stw	r0,MAS3(r11)
+	mfspr	r0,SPRN_MAS6
+	stw	r0,MAS6(r11)
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r0,SPRN_MAS7
+	stw	r0,MAS7(r11)
+#endif /* CONFIG_PHYS_64BIT */
+#endif /* CONFIG_FSL_BOOKE */
+#ifdef CONFIG_44x
+	mfspr	r0,SPRN_MMUCR
+	stw	r0,MMUCR(r11)
+#endif
+	mfspr	r0,SPRN_SRR0
+	stw	r0,_SRR0(r11)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,_SRR1(r11)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,SAVED_KSP_LIMIT(r11)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -78,6 +103,16 @@ crit_transfer_to_handler:
 	stw	r0,GPR10(r11)
 	lwz	r0,crit_r11@l(0)
 	stw	r0,GPR11(r11)
+	mfspr	r0,SPRN_SRR0
+	stw	r0,crit_srr0@l(0)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,crit_srr1@l(0)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,saved_ksp_limit@l(0)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -142,13 +177,14 @@ transfer_to_handler:
 	cmplw	r1,r9			/* if r1 <= ksp_limit */
 	ble-	stack_ovf		/* then the kernel stack overflowed */
 5:
-#ifdef CONFIG_6xx
+#if defined(CONFIG_6xx) || defined(CONFIG_E500)
 	rlwinm	r9,r1,0,0,31-THREAD_SHIFT
 	tophys(r9,r9)			/* check local flags */
 	lwz	r12,TI_LOCAL_FLAGS(r9)
 	mtcrf	0x01,r12
 	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
+	bt-	31-TLF_SLEEPING,7f
+#endif /* CONFIG_6xx || CONFIG_E500 */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
 3:
@@ -161,10 +197,17 @@ transfer_to_handler_cont:
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
-#ifdef CONFIG_6xx
+#if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
 	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
+	b	power_save_ppc32_restore
+
+7:	rlwinm	r12,r12,0,~_TLF_SLEEPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	lwz	r9,_MSR(r11)		/* if sleeping, clear MSR.EE */
+	rlwinm	r9,r9,0,~MSR_EE
+	lwz	r12,_LINK(r11)		/* and return to address in LR */
+	b	fast_exception_return
 #endif
 
 /*
@@ -669,7 +712,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	bne	do_work
 
 restore_user:
@@ -860,17 +903,90 @@ exc_exit_restart_end:
 	exc_lvl_rfi;							\
 	b	.;		/* prevent prefetch past exc_lvl_rfi */
 
+#define	RESTORE_xSRR(exc_lvl_srr0, exc_lvl_srr1)			\
+	lwz	r9,_##exc_lvl_srr0(r1);					\
+	lwz	r10,_##exc_lvl_srr1(r1);				\
+	mtspr	SPRN_##exc_lvl_srr0,r9;					\
+	mtspr	SPRN_##exc_lvl_srr1,r10;
+
+#if defined(CONFIG_FSL_BOOKE)
+#ifdef CONFIG_PHYS_64BIT
+#define	RESTORE_MAS7							\
+	lwz	r11,MAS7(r1);						\
+	mtspr	SPRN_MAS7,r11;
+#else
+#define	RESTORE_MAS7
+#endif /* CONFIG_PHYS_64BIT */
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MAS0(r1);						\
+	lwz	r10,MAS1(r1);						\
+	lwz	r11,MAS2(r1);						\
+	mtspr	SPRN_MAS0,r9;						\
+	lwz	r9,MAS3(r1);						\
+	mtspr	SPRN_MAS1,r10;						\
+	lwz	r10,MAS6(r1);						\
+	mtspr	SPRN_MAS2,r11;						\
+	mtspr	SPRN_MAS3,r9;						\
+	mtspr	SPRN_MAS6,r10;						\
+	RESTORE_MAS7;
+#elif defined(CONFIG_44x)
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MMUCR(r1);						\
+	mtspr	SPRN_MMUCR,r9;
+#else
+#define RESTORE_MMU_REGS
+#endif
+
+#ifdef CONFIG_40x
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lis	r10,saved_ksp_limit@ha;
+	lwz	r10,saved_ksp_limit@l(r10);
+	tovirt(r9,r9);
+	stw	r10,KSP_LIMIT(r9)
+	lis	r9,crit_srr0@ha;
+	lwz	r9,crit_srr0@l(r9);
+	lis	r10,crit_srr1@ha;
+	lwz	r10,crit_srr1@l(r10);
+	mtspr	SPRN_SRR0,r9;
+	mtspr	SPRN_SRR1,r10;
 	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+#endif /* CONFIG_40x */
 
 #ifdef CONFIG_BOOKE
+	.globl	ret_from_crit_exc
+ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_MMU_REGS;
+	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+
 	.globl	ret_from_debug_exc
 ret_from_debug_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	lwz	r9,THREAD_INFO-THREAD(r9)
+	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r10,TI_PREEMPT(r10)
+	stw	r10,TI_PREEMPT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
 
 	.globl	ret_from_mcheck_exc
 ret_from_mcheck_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_xSRR(DSRR0,DSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
 #endif /* CONFIG_BOOKE */
 
@@ -926,7 +1042,7 @@ recheck:
 	lwz	r9,TI_FLAGS(r9)
 	andi.	r0,r9,_TIF_NEED_RESCHED
 	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	beq	restore_user
 do_user_signal:			/* r10 contains MSR_KERNEL here */
 	ori	r10,r10,MSR_EE
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2f511a969d2c..d7369243ae44 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -354,6 +354,11 @@ _GLOBAL(_switch)
 	mflr	r20		/* Return to switch caller */
 	mfmsr	r22
 	li	r0, MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r0,r0,MSR_VSX@h	/* Disable VSX */
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
@@ -384,16 +389,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 	ld	r8,KSP(r4)	/* new stack pointer */
 BEGIN_FTR_SECTION
-	b	2f
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-BEGIN_FTR_SECTION
+  BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
 	clrrdi	r9,r1,28	/* get current sp ESID */
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
-BEGIN_FTR_SECTION
+  FTR_SECTION_ELSE_NESTED(95)
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+FTR_SECTION_ELSE
+	b	2f
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 821e152e093c..a088c064ae40 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -24,6 +24,29 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_VSX
+#define REST_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	REST_32FPRS(n,base);						\
+	b	3f;							\
+2:	REST_32VSRS(n,c,base);						\
+3:
+
+#define SAVE_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	SAVE_32FPRS(n,base);						\
+	b	3f;							\
+2:	SAVE_32VSRS(n,c,base);						\
+3:
+#else
+#define REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
+#define SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
+#endif
+
 /*
  * This task wants to use the FPU now.
  * On UP, disable FP for the task which had the FPU previously,
@@ -34,6 +57,11 @@
 _GLOBAL(load_up_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
@@ -50,7 +78,7 @@ _GLOBAL(load_up_fpu)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	SAVE_32FPRS(0, r4)
+	SAVE_32FPVSRS(0, r5, r4)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r4)
 	PPC_LL	r5,PT_REGS(r4)
@@ -77,7 +105,7 @@ _GLOBAL(load_up_fpu)
 #endif
 	lfd	fr0,THREAD_FPSCR(r5)
 	MTFSF_L(fr0)
-	REST_32FPRS(0, r5)
+	REST_32FPVSRS(0, r4, r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
@@ -85,7 +113,7 @@ _GLOBAL(load_up_fpu)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
+	blr
 
 /*
  * giveup_fpu(tsk)
@@ -96,6 +124,11 @@ _GLOBAL(load_up_fpu)
 _GLOBAL(giveup_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC_601
 	ISYNC_601
 	MTMSRD(r5)			/* enable use of fpu now */
@@ -106,7 +139,7 @@ _GLOBAL(giveup_fpu)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32FPRS(0, r3)
+	SAVE_32FPVSRS(0, r4 ,r3)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 785af9b56591..99ee2f0f0f2b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -421,8 +421,10 @@ BEGIN_FTR_SECTION
 	b 	ProgramCheck
 END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+	beq	1f
+	bl	load_up_fpu		/* if from user, just load it up */
+	b	fast_exception_return
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 8552e67e3a8b..56d8e5d90c5b 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -93,6 +93,12 @@ _ENTRY(crit_r10)
 	.space	4
 _ENTRY(crit_r11)
 	.space	4
+_ENTRY(crit_srr0)
+	.space	4
+_ENTRY(crit_srr1)
+	.space	4
+_ENTRY(saved_ksp_limit)
+	.space	4
 
 /*
  * Exception vector entry code. This code runs with address translation
@@ -148,14 +154,14 @@ _ENTRY(crit_r11)
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
+	lis	r11,critirq_ctx@ha;					     \
+	tophys(r11,r11);						     \
+	lwz	r11,critirq_ctx@l(r11);					     \
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
@@ -996,16 +1002,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
 /* Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
  */
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 22b5d2c459a3..f3a1ea9d7fe4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -293,119 +293,9 @@ interrupt_base:
 	MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception)
 
 	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r11,r11,0,20,10
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
+	DATA_STORAGE_EXCEPTION
 
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
+		/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
@@ -423,7 +313,6 @@ interrupt_base:
 #else
 	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
 #endif
-
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
 	NORMAL_EXCEPTION_PROLOG
@@ -484,18 +373,57 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,10,30,30
+
+	/* Load the PTE */
 	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_D
+tlb_44x_patch_hwater_D:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_DEAR
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -510,7 +438,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -554,18 +482,42 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_I
+tlb_44x_patch_hwater_I:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_SRR0
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -587,86 +539,40 @@ interrupt_base:
 
 /*
  * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+  */
 
 /*
 
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
+ * 	r11 - PTE high word value
+ *	r12 - PTE low word value
+ *	r13 - TLB index
  *	MMUCR - loaded with proper value when we get here
  *	Upon exit, we reload everything and RFI.
  */
 finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
+	/* Combine RPN & ERPN an write WS 0 */
+	rlwimi	r11,r12,0,0,19
+	tlbwe	r11,r13,PPC44x_TLB_XLAT
 
 	/*
-	 * Create PAGEID. This is the faulting address,
+	 * Create WS1. This is the faulting address (EPN),
 	 * page size, and valid flag.
 	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r12, r12, 0, 20, 10
-
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+	li	r11,PPC44x_TLB_VALID | PPC44x_TLB_4K
+	rlwimi	r10,r11,0,20,31			/* Insert valid and page size*/
+	tlbwe	r10,r13,PPC44x_TLB_PAGEID	/* Write PAGEID */
+
+	/* And WS 2 */
+	li	r10,0xf85			/* Mask to apply from PTE */
+	rlwimi	r10,r12,29,30,30		/* DIRTY -> SW position */
+	and	r11,r12,r10			/* Mask PTE bits to keep */
+	andi.	r10,r12,_PAGE_USER		/* User page ? */
+	beq	1f				/* nope, leave U bits empty */
+	rlwimi	r11,r11,3,26,28			/* yes, copy S bits to U */
+1:	tlbwe	r11,r13,PPC44x_TLB_ATTRIB	/* Write ATTRIB */
 
 	/* Done...restore registers and get out of here.
 	*/
@@ -742,15 +648,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 25e84c0e1166..cc8fb474d520 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -275,7 +275,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	. = 0xf00
 	b	performance_monitor_pSeries
 
-	STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
+	. = 0xf20
+	b	altivec_unavailable_pSeries
+
+	. = 0xf40
+	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
 	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
@@ -295,6 +299,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 
 	/* moved from 0xf00 */
 	STD_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., vsx_unavailable)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -739,7 +745,8 @@ fp_unavailable_common:
 	ENABLE_INTS
 	bl	.kernel_fp_unavailable_exception
 	BUG_OPCODE
-1:	b	.load_up_fpu
+1:	bl	.load_up_fpu
+	b	fast_exception_return
 
 	.align	7
 	.globl altivec_unavailable_common
@@ -747,7 +754,10 @@ altivec_unavailable_common:
 	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
-	bne	.load_up_altivec	/* if from user, just load it up */
+	beq	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
 	bl	.save_nvgprs
@@ -827,9 +837,70 @@ _STATIC(load_up_altivec)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
-	b	fast_exception_return
+	blr
 #endif /* CONFIG_ALTIVEC */
 
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+#ifdef CONFIG_VSX
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ * On entry: r13 == 'current' && last_task_used_vsx != 'current'
+ */
+_STATIC(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+	andi.	r5,r12,MSR_FP
+	beql+	load_up_fpu		/* skip if already loaded */
+	andis.	r5,r12,MSR_VEC@h
+	beql+	load_up_altivec		/* skip if already loaded */
+
+#ifndef CONFIG_SMP
+	ld	r3,last_task_used_vsx@got(r2)
+	ld	r4,0(r3)
+	cmpdi	0,r4,0
+	beq	1f
+	/* Disable VSX for last_task_used_vsx */
+	addi	r4,r4,THREAD
+	ld	r5,PT_REGS(r4)
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r6,MSR_VSX@h
+	andc	r6,r4,r6
+	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	ld	r4,PACACURRENT(r13)
+	addi	r4,r4,THREAD		/* Get THREAD */
+	li	r6,1
+	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+	/* enable use of VSX after return */
+	oris	r12,r12,MSR_VSX@h
+	std	r12,_MSR(r1)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	ld	r4,PACACURRENT(r13)
+	std	r4,0(r3)
+#endif /* CONFIG_SMP */
+	b	fast_exception_return
+#endif /* CONFIG_VSX */
+
 /*
  * Hash table stuff
  */
@@ -1127,7 +1198,6 @@ _GLOBAL(generic_secondary_smp_init)
 3:	HMT_LOW
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
 					/* start.			 */
-	sync
 
 #ifndef CONFIG_SMP
 	b	3b			/* Never go on non-SMP		 */
@@ -1135,6 +1205,8 @@ _GLOBAL(generic_secondary_smp_init)
 	cmpwi	0,r23,0
 	beq	3b			/* Loop until told to go	 */
 
+	sync				/* order paca.run and cur_cpu_spec */
+
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
 	ld	r23,0(r23)
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index aefafc6330c9..fce2df988504 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -43,9 +43,7 @@
 	SAVE_2GPRS(7, r11)
 
 /* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
+ * processors we allocate a stack per additional priority level.
  *
  * On 40x critical is the only additional level
  * On 44x/e500 we have critical and machine check
@@ -61,36 +59,37 @@
  * going to critical or their own debug level we aren't currently
  * providing configurations that micro-optimize space usage.
  */
-#ifdef CONFIG_44x
-#define NUM_EXCEPTION_LVLS	2
-#else
-#define NUM_EXCEPTION_LVLS	3
-#endif
-#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
 
 /* CRIT_SPRG only used in critical exception handling */
 #define CRIT_SPRG	SPRN_SPRG2
 /* MCHECK_SPRG only used in machine check exception handling */
 #define MCHECK_SPRG	SPRN_SPRG6W
 
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
+#define MCHECK_STACK_BASE	mcheckirq_ctx
+#define CRIT_STACK_BASE		critirq_ctx
 
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
+/* only on e500mc/e200 */
+#define DEBUG_STACK_BASE	dbgirq_ctx
+#ifdef CONFIG_PPC_E500MC
+#define DEBUG_SPRG		SPRN_SPRG9
+#else
 #define DEBUG_SPRG		SPRN_SPRG6W
+#endif
+
+#define EXC_LVL_FRAME_OVERHEAD	(THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
 
 #ifdef CONFIG_SMP
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
 	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
+	slwi	r8,r8,2;				\
+	addis	r8,r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #else
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
+	lis	r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #endif
 
 /*
@@ -104,22 +103,36 @@
 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
 	mtspr	exc_level##_SPRG,r8;					     \
 	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
+	stw	r9,GPR9(r8);		/* save various registers	   */\
+	mfcr	r9;			/* save CR in r9 for now	   */\
+	stw	r10,GPR10(r8);						     \
+	stw	r11,GPR11(r8);						     \
+	stw	r9,_CCR(r8);		/* save CR on stack		   */\
+	mfspr	r10,exc_level_srr1;	/* check whether user or kernel    */\
+	andi.	r10,r10,MSR_PR;						     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
+	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	stw	r9,_CCR(r11);		/* save CR			   */\
+	lwz	r10,GPR10(r8);		/* copy regs from exception stack  */\
+	lwz	r9,GPR9(r8);						     \
+	stw	r10,GPR10(r11);						     \
+	lwz	r10,GPR11(r8);						     \
 	stw	r9,GPR9(r11);						     \
+	stw	r10,GPR11(r11);						     \
+	b	2f;							     \
+	/* COMING FROM PRIV MODE */					     \
+1:	lwz	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	lwz	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	stw	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	stw	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8);		     \
+	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
+	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	mr	r11,r8;							     \
+2:	mfspr	r8,exc_level##_SPRG;					     \
+	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
 	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
@@ -231,7 +244,7 @@ label:
 	 * the code where the exception occurred (since exception entry	      \
 	 * doesn't turn off DE automatically).  We simulate the effect	      \
 	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
+	 * off DE in the DSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
 	andis.	r10,r10,DBSR_IC@h;					      \
@@ -262,17 +275,17 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	DEBUG_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,DEBUG_SPRG;						      \
 									      \
 	RFDI;								      \
 	b	.;							      \
 									      \
-	/* continue normal handling for a critical exception... */	      \
+	/* continue normal handling for a debug exception... */		      \
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+	EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
 
 #define DEBUG_CRIT_EXCEPTION						      \
 	START_EXCEPTION(DebugCrit);					      \
@@ -315,8 +328,8 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	CRIT_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,CRIT_SPRG;						      \
 									      \
 	rfci;								      \
@@ -327,6 +340,14 @@ label:
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
 
+#define DATA_STORAGE_EXCEPTION						      \
+	START_EXCEPTION(DataStorage)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
+	stw	r5,_ESR(r11);						      \
+	mfspr	r4,SPRN_DEAR;		/* Grab the DEAR */		      \
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
 	NORMAL_EXCEPTION_PROLOG;					      \
@@ -363,8 +384,31 @@ label:
 #define FP_UNAVAILABLE_EXCEPTION					      \
 	START_EXCEPTION(FloatingPointUnavailable)			      \
 	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+	beq	1f;							      \
+	bl	load_up_fpu;		/* if from user, just load it up */   \
+	b	fast_exception_return;					      \
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
+#ifndef __ASSEMBLY__
+struct exception_regs {
+	unsigned long mas0;
+	unsigned long mas1;
+	unsigned long mas2;
+	unsigned long mas3;
+	unsigned long mas6;
+	unsigned long mas7;
+	unsigned long srr0;
+	unsigned long srr1;
+	unsigned long csrr0;
+	unsigned long csrr1;
+	unsigned long dsrr0;
+	unsigned long dsrr1;
+	unsigned long saved_ksp_limit;
+};
+
+/* ensure this structure is always sized to a multiple of the stack alignment */
+#define STACK_EXC_LVL_FRAME_SIZE	_ALIGN_UP(sizeof (struct exception_regs), 16)
+
+#endif /* __ASSEMBLY__ */
 #endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index e581524d85bc..c4268500e856 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -39,6 +39,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 #include "head_booke.h"
 
 /* As with the other PowerPC ports, it is expected that when code
@@ -304,7 +305,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
 	SET_IVOR(15, DebugDebug);
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	SET_IVOR(15, DebugCrit);
 #endif
 	SET_IVOR(32, SPEUnavailable);
@@ -313,6 +314,9 @@ skpinv:	addi	r6,r6,1				/* Increment */
 #ifndef CONFIG_E200
 	SET_IVOR(35, PerformanceMonitor);
 #endif
+#ifdef CONFIG_PPC_E500MC
+	SET_IVOR(36, Doorbell);
+#endif
 
 	/* Establish the interrupt vector base */
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
@@ -750,10 +754,13 @@ interrupt_base:
 	/* Performance Monitor */
 	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
+#ifdef CONFIG_PPC_E500MC
+	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+#endif
 
 	/* Debug Interrupt */
 	DEBUG_DEBUG_EXCEPTION
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	DEBUG_CRIT_EXCEPTION
 #endif
 
@@ -1065,6 +1072,52 @@ _GLOBAL(set_context)
 	isync			/* Force context change */
 	blr
 
+_GLOBAL(flush_dcache_L1)
+	mfspr	r3,SPRN_L1CFG0
+
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+	
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	blr
+
 /*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.
@@ -1080,15 +1133,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-	.align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9971159c8040..9d42eb57aea3 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -53,7 +53,7 @@ static struct device ibmebus_bus_device = { /* fake "parent" device */
 struct bus_type ibmebus_bus_type;
 
 /* These devices will automatically be added to the bus during init */
-static struct of_device_id __initdata builtin_matches[] = {
+static struct of_device_id __initdata ibmebus_matches[] = {
 	{ .compatible = "IBM,lhca" },
 	{ .compatible = "IBM,lhea" },
 	{},
@@ -82,7 +82,8 @@ static void ibmebus_free_coherent(struct device *dev,
 static dma_addr_t ibmebus_map_single(struct device *dev,
 				     void *ptr,
 				     size_t size,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
 	return (dma_addr_t)(ptr);
 }
@@ -90,14 +91,16 @@ static dma_addr_t ibmebus_map_single(struct device *dev,
 static void ibmebus_unmap_single(struct device *dev,
 				 dma_addr_t dma_addr,
 				 size_t size,
-				 enum dma_data_direction direction)
+				 enum dma_data_direction direction,
+				 struct dma_attrs *attrs)
 {
 	return;
 }
 
 static int ibmebus_map_sg(struct device *dev,
 			  struct scatterlist *sgl,
-			  int nents, enum dma_data_direction direction)
+			  int nents, enum dma_data_direction direction,
+			  struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -112,7 +115,8 @@ static int ibmebus_map_sg(struct device *dev,
 
 static void ibmebus_unmap_sg(struct device *dev,
 			     struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	return;
 }
@@ -350,7 +354,7 @@ static int __init ibmebus_bus_init(void)
 		return err;
 	}
 
-	err = ibmebus_create_devices(builtin_matches);
+	err = ibmebus_create_devices(ibmebus_matches);
 	if (err) {
 		device_unregister(&ibmebus_bus_device);
 		bus_unregister(&ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 01bcd52bbf8e..019b02d8844f 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -153,7 +153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  * address of current.  R11 points to the exception frame (physical
  * address).  We have to preserve r10.
  */
-_GLOBAL(power_save_6xx_restore)
+_GLOBAL(power_save_ppc32_restore)
 	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
new file mode 100644
index 000000000000..06304034b393
--- /dev/null
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Dave Liu <daveliu@freescale.com>
+ * copy from idle_6xx.S and modify for e500 based processor,
+ * implement the power_save function in idle.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+	.text
+
+_GLOBAL(e500_idle)
+	rlwinm	r3,r1,0,0,31-THREAD_SHIFT	/* current thread_info */
+	lwz	r4,TI_LOCAL_FLAGS(r3)	/* set napping bit */
+	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
+	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
+
+	/* Check if we can nap or doze, put HID0 mask in r3 */
+	lis	r3,0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+
+BEGIN_FTR_SECTION
+	/* Now check if user enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	stwu	r1,-16(r1)
+	mflr	r0
+	stw	r0,20(r1)
+	bl	flush_dcache_L1
+	lwz	r0,20(r1)
+	addi	r1,r1,16
+	mtlr	r0
+	lis	r3,HID0_NAP@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+BEGIN_FTR_SECTION
+	msync
+	li	r7,L2CSR0_L2FL@l
+	mtspr	SPRN_L2CSR0,r7
+2:
+	mfspr	r7,SPRN_L2CSR0
+	andi.	r4,r7,L2CSR0_L2FL@l
+	bne	2b
+END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
+1:
+	/* Go to NAP or DOZE now */
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
+	or	r4,r4,r3
+	isync
+	mtspr	SPRN_HID0,r4
+	isync
+
+	mfmsr	r7
+	oris	r7,r7,MSR_WE@h
+	ori	r7,r7,MSR_EE
+	msync
+	mtmsr	r7
+	isync
+2:	b	2b
+
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * r2 containing physical address of current.
+ * r11 points to the exception frame (physical address).
+ * We have to preserve r10.
+ */
+_GLOBAL(power_save_ppc32_restore)
+	lwz	r9,_LINK(r11)		/* interrupted in e500_idle */
+	stw	r9,_NIP(r11)		/* make it do a blr */
+
+#ifdef CONFIG_SMP
+	mfspr	r12,SPRN_SPRG3
+	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
+	slwi	r11,r11,2
+#else
+	li	r11,0
+#endif
+	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 0c663669bc32..8c68ee9e5d1c 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -267,11 +267,11 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
-int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-		 int nelems, unsigned long mask,
-		 enum dma_data_direction direction)
+int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+		 struct scatterlist *sglist, int nelems,
+		 unsigned long mask, enum dma_data_direction direction,
+		 struct dma_attrs *attrs)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
@@ -412,7 +412,8 @@ int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 
 
 void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	unsigned long flags;
@@ -554,7 +555,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
  */
 dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			    void *vaddr, size_t size, unsigned long mask,
-			    enum dma_data_direction direction)
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	dma_addr_t dma_handle = DMA_ERROR_CODE;
 	unsigned long uaddr;
@@ -587,7 +588,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 }
 
 void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	unsigned int npages;
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index dcc946e67099..6ac8612da3c3 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -356,9 +356,42 @@ void __init init_IRQ(void)
 {
 	if (ppc_md.init_IRQ)
 		ppc_md.init_IRQ();
+
+	exc_lvl_ctx_init();
+
 	irq_ctx_init();
 }
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
+
+void exc_lvl_ctx_init(void)
+{
+	struct thread_info *tp;
+	int i;
+
+	for_each_possible_cpu(i) {
+		memset((void *)critirq_ctx[i], 0, THREAD_SIZE);
+		tp = critirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+#ifdef CONFIG_BOOKE
+		memset((void *)dbgirq_ctx[i], 0, THREAD_SIZE);
+		tp = dbgirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+		memset((void *)mcheckirq_ctx[i], 0, THREAD_SIZE);
+		tp = mcheckirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = HARDIRQ_OFFSET;
+#endif
+	}
+}
+#endif
 
 #ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
@@ -465,7 +498,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	host->revmap_type = revmap_type;
 	host->inval_irq = inval_irq;
 	host->ops = ops;
-	host->of_node = of_node;
+	host->of_node = of_node_get(of_node);
 
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c176c513566b..4ba2af125450 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -34,6 +34,13 @@
 #include <asm/cacheflush.h>
 #include <asm/sstep.h>
 #include <asm/uaccess.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_BOOKE
+#define MSR_SINGLESTEP	(MSR_DE)
+#else
+#define MSR_SINGLESTEP	(MSR_SE)
+#endif
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -53,7 +60,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		ret = -EINVAL;
 	}
 
-	/* insn must be on a special executable page on ppc64 */
+	/* insn must be on a special executable page on ppc64.  This is
+	 * not explicitly required on ppc32 (right now), but it doesn't hurt */
 	if (!ret) {
 		p->ainsn.insn = get_insn_slot();
 		if (!p->ainsn.insn)
@@ -95,7 +103,16 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	regs->msr |= MSR_SE;
+	/* We turn off async exceptions to ensure that the single step will
+	 * be for the instruction we have the kprobe on, if we dont its
+	 * possible we'd get the single step reported for an exception handler
+	 * like Decrementer or External Interrupt */
+	regs->msr &= ~MSR_EE;
+	regs->msr |= MSR_SINGLESTEP;
+#ifdef CONFIG_BOOKE
+	regs->msr &= ~MSR_CE;
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+#endif
 
 	/*
 	 * On powerpc we should single step on the original
@@ -158,7 +175,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kprobe_opcode_t insn = *p->ainsn.insn;
 			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 					is_trap(insn)) {
-				regs->msr &= ~MSR_SE;
+				/* Turn off 'trace' bits */
+				regs->msr &= ~MSR_SINGLESTEP;
 				regs->msr |= kcb->kprobe_saved_msr;
 				goto no_kprobe;
 			}
@@ -376,6 +394,10 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 	if (!cur)
 		return 0;
 
+	/* make sure we got here for instruction we have a kprobe on */
+	if (((unsigned long)cur->ainsn.insn + 4) != regs->nip)
+		return 0;
+
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
 		cur->post_handler(cur, regs, 0);
@@ -395,10 +417,10 @@ out:
 
 	/*
 	 * if somebody else is singlestepping across a probe point, msr
-	 * will have SE set, in which case, continue the remaining processing
+	 * will have DE/SE set, in which case, continue the remaining processing
 	 * of do_debug, as if this is not a probe hit.
 	 */
-	if (regs->msr & MSR_SE)
+	if (regs->msr & MSR_SINGLESTEP)
 		return 0;
 
 	return 1;
@@ -421,7 +443,7 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * normal page fault.
 		 */
 		regs->nip = (unsigned long)cur->addr;
-		regs->msr &= ~MSR_SE;
+		regs->msr &= ~MSR_SINGLESTEP; /* Turn off 'trace' bits */
 		regs->msr |= kcb->kprobe_saved_msr;
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
@@ -498,7 +520,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 #ifdef CONFIG_PPC64
 unsigned long arch_deref_entry_point(void *entry)
 {
-	return (unsigned long)(((func_descr_t *)entry)->entry);
+	return ((func_descr_t *)entry)->entry;
 }
 #endif
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1e656b43ad7f..827a5726a035 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -573,7 +573,7 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 	return single_open(file, lparcfg_data, NULL);
 }
 
-const struct file_operations lparcfg_fops = {
+static const struct file_operations lparcfg_fops = {
 	.owner		= THIS_MODULE,
 	.read		= seq_read,
 	.write		= lparcfg_write,
@@ -581,7 +581,7 @@ const struct file_operations lparcfg_fops = {
 	.release	= single_release,
 };
 
-int __init lparcfg_init(void)
+static int __init lparcfg_init(void)
 {
 	struct proc_dir_entry *ent;
 	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
@@ -601,7 +601,7 @@ int __init lparcfg_init(void)
 	return 0;
 }
 
-void __exit lparcfg_cleanup(void)
+static void __exit lparcfg_cleanup(void)
 {
 	if (proc_ppc64_lparcfg)
 		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index b732b5f8e356..a168514d8609 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -158,7 +158,7 @@ void kexec_copy_flush(struct kimage *image)
  * on calling the interrupts, but we would like to call it off irq level
  * so that the interrupt controller is clean.
  */
-void kexec_smp_down(void *arg)
+static void kexec_smp_down(void *arg)
 {
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 1);
@@ -249,7 +249,7 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-union thread_union kexec_stack
+static union thread_union kexec_stack
 	__attribute__((__section__(".data.init_task"))) = { };
 
 /* Our assembly helper, in kexec_stub.S */
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 7b9160220698..85cb6f340846 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -116,3 +116,8 @@ _GLOBAL(longjmp)
 	mtlr	r0
 	mr	r3,r4
 	blr
+
+_GLOBAL(__setup_cpu_power7)
+_GLOBAL(__restore_cpu_power7)
+	/* place holder */
+	blr
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 89aaaa6f3561..6321ae36f729 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -489,7 +489,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(__flush_icache_range)
+_KPROBE(__flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 942951e76586..4dd70cf7bb4e 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -506,6 +506,39 @@ _GLOBAL(giveup_altivec)
 
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+	mfmsr	r5
+	oris	r5,r5,MSR_VSX@h
+	mtmsrd	r5			/* enable use of VSX now */
+	isync
+
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VSX@h
+	andc	r4,r4,r3		/* disable VSX for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_vsx@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_VSX */
+
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
new file mode 100644
index 000000000000..af07003573c4
--- /dev/null
+++ b/arch/powerpc/kernel/module.c
@@ -0,0 +1,116 @@
+/*  Kernel module help for powerpc.
+    Copyright (C) 2001, 2003 Rusty Russell IBM Corporation.
+    Copyright (C) 2008 Freescale Semiconductor, Inc.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/module.h>
+#include <linux/elf.h>
+#include <linux/moduleloader.h>
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/bug.h>
+#include <asm/module.h>
+#include <asm/uaccess.h>
+#include <asm/firmware.h>
+#include <linux/sort.h>
+
+#include "setup.h"
+
+LIST_HEAD(module_bug_list);
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+
+	return vmalloc_exec(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
+{
+	char *secstrings;
+	unsigned int i;
+
+	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	for (i = 1; i < hdr->e_shnum; i++)
+		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
+			return &sechdrs[i];
+	return NULL;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		const Elf_Shdr *sechdrs, struct module *me)
+{
+	const Elf_Shdr *sect;
+	int err;
+
+	err = module_bug_finalize(hdr, sechdrs, me);
+	if (err)
+		return err;
+
+	/* Apply feature fixups */
+	sect = find_section(hdr, sechdrs, "__ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(cur_cpu_spec->cpu_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+
+#ifdef CONFIG_PPC64
+	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(powerpc_firmware_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+#endif
+
+	sect = find_section(hdr, sechdrs, "__lwsync_fixup");
+	if (sect != NULL)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 (void *)sect->sh_addr,
+				 (void *)sect->sh_addr + sect->sh_size);
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	module_bug_cleanup(mod);
+}
+
+struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+	struct mod_arch_specific *mod;
+	unsigned int i;
+	struct bug_entry *bug;
+
+	list_for_each_entry(mod, &module_bug_list, bug_list) {
+		bug = mod->bug_table;
+		for (i = 0; i < mod->num_bugs; ++i, ++bug)
+			if (bugaddr == bug->bug_addr)
+				return bug;
+	}
+	return NULL;
+}
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index eab313858315..2df91a03462a 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -34,23 +34,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-LIST_HEAD(module_bug_list);
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 /* Count how many different relocations (different symbol, different
    addend) */
 static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
@@ -325,58 +308,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 	}
 	return 0;
 }
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)		/* never true, currently */
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 3a82b02b784b..ee6a2982d567 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -24,6 +24,7 @@
 #include <asm/module.h>
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
+#include <asm/code-patching.h>
 #include <linux/sort.h>
 
 #include "setup.h"
@@ -101,22 +102,6 @@ static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
 	return _count_relocs;
 }
 
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 static int relacmp(const void *_x, const void *_y)
 {
 	const Elf64_Rela *x, *y;
@@ -346,7 +331,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
    restore r2. */
 static int restore_r2(u32 *instruction, struct module *me)
 {
-	if (*instruction != 0x60000000) {
+	if (*instruction != PPC_NOP_INSTR) {
 		printk("%s: Expect noop after relocate, got %08x\n",
 		       me->name, *instruction);
 		return 0;
@@ -466,65 +451,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
-
-LIST_HEAD(module_bug_list);
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		const Elf_Shdr *sechdrs, struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(powerpc_firmware_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index c62d1012c013..3bb7d3dd28be 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -34,5 +34,5 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 void arch_teardown_msi_irqs(struct pci_dev *dev)
 {
-	return ppc_md.teardown_msi_irqs(dev);
+	ppc_md.teardown_msi_irqs(dev);
 }
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index 5748ddb47d9f..e9be908f199b 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -89,54 +89,6 @@ struct of_device *of_device_alloc(struct device_node *np,
 }
 EXPORT_SYMBOL(of_device_alloc);
 
-ssize_t of_device_get_modalias(struct of_device *ofdev,
-				char *str, ssize_t len)
-{
-	const char *compat;
-	int cplen, i;
-	ssize_t tsize, csize, repend;
-
-	/* Name & Type */
-	csize = snprintf(str, len, "of:N%sT%s",
-				ofdev->node->name, ofdev->node->type);
-
-	/* Get compatible property if any */
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
-	if (!compat)
-		return csize;
-
-	/* Find true end (we tolerate multiple \0 at the end */
-	for (i=(cplen-1); i>=0 && !compat[i]; i--)
-		cplen--;
-	if (!cplen)
-		return csize;
-	cplen++;
-
-	/* Check space (need cplen+1 chars including final \0) */
-	tsize = csize + cplen;
-	repend = tsize;
-
-	if (csize>=len)		/* @ the limit, all is already filled */
-		return tsize;
-
-	if (tsize>=len) {		/* limit compat list */
-		cplen = len-csize-1;
-		repend = len;
-	}
-
-	/* Copy and do char replacement */
-	memcpy(&str[csize+1], compat, cplen);
-	for (i=csize; i<repend; i++) {
-		char c = str[i];
-		if (c=='\0')
-			str[i] = 'C';
-		else if (c==' ')
-			str[i] = '_';
-	}
-
-	return tsize;
-}
-
 int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct of_device *ofdev;
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index 90e562771791..dc16aefe1dd0 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -120,6 +120,7 @@ struct mcontext32 {
 	elf_fpregset_t		mc_fregs;
 	unsigned int		mc_pad[2];
 	elf_vrregset_t32	mc_vregs __attribute__((__aligned__(16)));
+	elf_vsrreghalf_t32      mc_vsregs __attribute__((__aligned__(16)));
 };
 
 struct ucontext32 { 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index a8d02506468a..e1ea4fe5cfbd 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -107,6 +107,9 @@ EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL(giveup_vsx);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 EXPORT_SYMBOL(giveup_spe);
 #endif /* CONFIG_SPE */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7de41c3948ec..219f3634115e 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -53,6 +53,7 @@ extern unsigned long _get_SP(void);
 #ifndef CONFIG_SMP
 struct task_struct *last_task_used_math = NULL;
 struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_vsx = NULL;
 struct task_struct *last_task_used_spe = NULL;
 #endif
 
@@ -104,17 +105,6 @@ void enable_kernel_fp(void)
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
-int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
-{
-	if (!tsk->thread.regs)
-		return 0;
-	flush_fp_to_thread(current);
-
-	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
-
-	return 1;
-}
-
 #ifdef CONFIG_ALTIVEC
 void enable_kernel_altivec(void)
 {
@@ -148,36 +138,48 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
+#endif /* CONFIG_ALTIVEC */
 
-int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs)
+#ifdef CONFIG_VSX
+#if 0
+/* not currently used, but some crazy RAID module might want to later */
+void enable_kernel_vsx(void)
 {
-	/* ELF_NVRREG includes the VSCR and VRSAVE which we need to save
-	 * separately, see below */
-	const int nregs = ELF_NVRREG - 2;
-	elf_vrreg_t *reg;
-	u32 *dest;
-
-	if (tsk == current)
-		flush_altivec_to_thread(tsk);
-
-	reg = (elf_vrreg_t *)vrregs;
-
-	/* copy the 32 vr registers */
-	memcpy(reg, &tsk->thread.vr[0], nregs * sizeof(*reg));
-	reg += nregs;
+	WARN_ON(preemptible());
 
-	/* copy the vscr */
-	memcpy(reg, &tsk->thread.vscr, sizeof(*reg));
-	reg++;
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
+		giveup_vsx(current);
+	else
+		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
+#else
+	giveup_vsx(last_task_used_vsx);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_vsx);
+#endif
 
-	/* vrsave is stored in the high 32bit slot of the final 128bits */
-	memset(reg, 0, sizeof(*reg));
-	dest = (u32 *)reg;
-	*dest = tsk->thread.vrsave;
+void giveup_vsx(struct task_struct *tsk)
+{
+	giveup_fpu(tsk);
+	giveup_altivec(tsk);
+	__giveup_vsx(tsk);
+}
 
-	return 1;
+void flush_vsx_to_thread(struct task_struct *tsk)
+{
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_VSX) {
+#ifdef CONFIG_SMP
+			BUG_ON(tsk != current);
+#endif
+			giveup_vsx(tsk);
+		}
+		preempt_enable();
+	}
 }
-#endif /* CONFIG_ALTIVEC */
+#endif /* CONFIG_VSX */
 
 #ifdef CONFIG_SPE
 
@@ -209,14 +211,6 @@ void flush_spe_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
-
-int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
-{
-	flush_spe_to_thread(current);
-	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
-	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
-	return 1;
-}
 #endif /* CONFIG_SPE */
 
 #ifndef CONFIG_SMP
@@ -233,6 +227,10 @@ void discard_lazy_cpu_state(void)
 	if (last_task_used_altivec == current)
 		last_task_used_altivec = NULL;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (last_task_used_vsx == current)
+		last_task_used_vsx = NULL;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
@@ -297,6 +295,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX))
+		/* VMX and FPU registers are already save here */
+		__giveup_vsx(prev);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/*
 	 * If the previous thread used spe in the last quantum
@@ -317,6 +320,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (new->thread.regs && last_task_used_altivec == new)
 		new->thread.regs->msr |= MSR_VEC;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (new->thread.regs && last_task_used_vsx == new)
+		new->thread.regs->msr |= MSR_VSX;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_spe
@@ -417,6 +424,8 @@ static struct regbit {
 	{MSR_EE,	"EE"},
 	{MSR_PR,	"PR"},
 	{MSR_FP,	"FP"},
+	{MSR_VEC,	"VEC"},
+	{MSR_VSX,	"VSX"},
 	{MSR_ME,	"ME"},
 	{MSR_IR,	"IR"},
 	{MSR_DR,	"DR"},
@@ -484,10 +493,8 @@ void show_regs(struct pt_regs * regs)
 	 * Lookup NIP late so we have the best change of getting the
 	 * above info out without failing
 	 */
-	printk("NIP ["REG"] ", regs->nip);
-	print_symbol("%s\n", regs->nip);
-	printk("LR ["REG"] ", regs->link);
-	print_symbol("%s\n", regs->link);
+	printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
+	printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
 #endif
 	show_stack(current, (unsigned long *) regs->gpr[1]);
 	if (!user_mode(regs))
@@ -534,6 +541,7 @@ void prepare_to_copy(struct task_struct *tsk)
 {
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
+	flush_vsx_to_thread(current);
 	flush_spe_to_thread(current);
 }
 
@@ -689,6 +697,9 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #endif
 
 	discard_lazy_cpu_state();
+#ifdef CONFIG_VSX
+	current->thread.used_vsr = 0;
+#endif
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
 	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC
@@ -971,8 +982,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
-			printk("["REG"] ["REG"] ", sp, ip);
-			print_symbol("%s", ip);
+			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 			if (firstframe)
 				printk(" (unreliable)");
 			printk("\n");
@@ -987,10 +997,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		    && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
-			printk("--- Exception: %lx", regs->trap);
-			print_symbol(" at %s\n", regs->nip);
 			lr = regs->link;
-			print_symbol("    LR = %s\n", lr);
+			printk("--- Exception: %lx at %pS\n    LR = %pS\n",
+			       regs->trap, (void *)regs->nip, (void *)lr);
 			firstframe = 1;
 		}
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 2aefe2a4129a..87d83c56b31e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -609,6 +609,10 @@ static struct feature_property {
 	{"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 	{"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
+	{"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	{"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
 	{"ibm,purr", 1, CPU_FTR_PURR, 0},
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 6d6df1e60325..1ea8c8d3ce89 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -620,6 +620,7 @@ static void __init early_cmdline_parse(void)
 #define OV1_PPC_2_03		0x10	/* set if we support PowerPC 2.03 */
 #define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
 #define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
+#define OV1_PPC_2_06		0x02	/* set if we support PowerPC 2.06 */
 
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
@@ -650,6 +651,8 @@ static void __init early_cmdline_parse(void)
 static unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
+	W(0xffff0000), W(0x003f0000),	/* POWER7 */
+	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
 	5 - 1,				/* 5 option vectors */
@@ -658,7 +661,7 @@ static unsigned char ibm_architecture_vec[] = {
 	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
-	OV1_PPC_2_04 | OV1_PPC_2_05,
+	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
 
 	/* option vector 2: Open Firmware options supported */
 	34 - 2,				/* length */
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 2a9fe97e4521..8feb93e7890c 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -215,29 +215,56 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   void *kbuf, void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fpr, 0, -1);
+#endif
 }
 
 static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+	if (i)
+		return i;
+	for (i = 0; i < 32 ; i++)
+		target->thread.TS_FPR(i) = buf[i];
+	memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
+	return 0;
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpr, 0, -1);
+#endif
 }
 
-
 #ifdef CONFIG_ALTIVEC
 /*
  * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
@@ -323,6 +350,56 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls aswell.  This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+static int vsr_active(struct task_struct *target,
+		      const struct user_regset *regset)
+{
+	flush_vsx_to_thread(target);
+	return target->thread.used_vsr ? regset->n : 0;
+}
+
+static int vsr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	double buf[32];
+	int ret, i;
+
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  buf, 0, 32 * sizeof(double));
+
+	return ret;
+}
+
+static int vsr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	double buf[32];
+	int ret,i;
+
+	flush_vsx_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 buf, 0, 32 * sizeof(double));
+	for (i = 0; i < 32 ; i++)
+		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+
+	return ret;
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_SPE
 
 /*
@@ -399,6 +476,9 @@ enum powerpc_regset {
 #ifdef CONFIG_ALTIVEC
 	REGSET_VMX,
 #endif
+#ifdef CONFIG_VSX
+	REGSET_VSX,
+#endif
 #ifdef CONFIG_SPE
 	REGSET_SPE,
 #endif
@@ -422,6 +502,13 @@ static const struct user_regset native_regsets[] = {
 		.active = vr_active, .get = vr_get, .set = vr_set
 	},
 #endif
+#ifdef CONFIG_VSX
+	[REGSET_VSX] = {
+		.core_note_type = NT_PPC_VSX, .n = 32,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = vsr_active, .get = vsr_get, .set = vsr_set
+	},
+#endif
 #ifdef CONFIG_SPE
 	[REGSET_SPE] = {
 		.n = 35,
@@ -728,7 +815,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			tmp = ptrace_get_reg(child, (int) index);
 		} else {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)];
 		}
 		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
@@ -755,7 +843,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = ptrace_put_reg(child, index, data);
 		} else {
 			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
 			ret = 0;
 		}
 		break;
@@ -820,6 +909,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 						 sizeof(u32)),
 					     (const void __user *) data);
 #endif
+#ifdef CONFIG_VSX
+	case PTRACE_GETVSRREGS:
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_VSX,
+					   0, (32 * sizeof(vector128) +
+					       sizeof(u32)),
+					   (void __user *) data);
+
+	case PTRACE_SETVSRREGS:
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_VSX,
+					     0, (32 * sizeof(vector128) +
+						 sizeof(u32)),
+					     (const void __user *) data);
+#endif
 #ifdef CONFIG_SPE
 	case PTRACE_GETEVRREGS:
 		/* Get the child spe register state. */
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 4c1de6af4c09..67bf1a1e7e14 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -64,6 +64,11 @@ static long compat_ptrace_old(struct task_struct *child, long request,
 	return -EPERM;
 }
 
+/* Macros to workout the correct index for the FPR in the thread struct */
+#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
+#define FPRHALF(i) (((i) - PT_FPR0) & 1)
+#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i)
+
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
@@ -122,7 +127,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			tmp = ((unsigned int *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)];
 		}
 		ret = put_user((unsigned int)tmp, (u32 __user *)data);
 		break;
@@ -162,7 +168,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		CHECK_FULL_REGS(child->thread.regs);
 		if (numReg >= PT_FPR0) {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long int *)child->thread.fpr)[numReg - PT_FPR0];
+			tmp = ((unsigned long int *)child->thread.fpr)
+				[FPRINDEX(numReg)];
 		} else { /* register within PT_REGS struct */
 			tmp = ptrace_get_reg(child, numReg);
 		} 
@@ -217,7 +224,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			((unsigned int *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)] = data;
 			ret = 0;
 		}
 		break;
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index f9c6abc84a94..1be9fe38bcb5 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -160,7 +160,7 @@ static int sensors_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_sensors_show, NULL);
 }
 
-const struct file_operations ppc_rtas_sensors_operations = {
+static const struct file_operations ppc_rtas_sensors_operations = {
 	.open		= sensors_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -172,7 +172,7 @@ static int poweron_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_poweron_show, NULL);
 }
 
-const struct file_operations ppc_rtas_poweron_operations = {
+static const struct file_operations ppc_rtas_poweron_operations = {
 	.open		= poweron_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -185,7 +185,7 @@ static int progress_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_progress_show, NULL);
 }
 
-const struct file_operations ppc_rtas_progress_operations = {
+static const struct file_operations ppc_rtas_progress_operations = {
 	.open		= progress_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -198,7 +198,7 @@ static int clock_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_clock_show, NULL);
 }
 
-const struct file_operations ppc_rtas_clock_operations = {
+static const struct file_operations ppc_rtas_clock_operations = {
 	.open		= clock_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -211,7 +211,7 @@ static int tone_freq_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_freq_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_freq_operations = {
+static const struct file_operations ppc_rtas_tone_freq_operations = {
 	.open		= tone_freq_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -224,7 +224,7 @@ static int tone_volume_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_volume_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_volume_operations = {
+static const struct file_operations ppc_rtas_tone_volume_operations = {
 	.open		= tone_volume_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -237,7 +237,7 @@ static int rmo_buf_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_rmo_buf_show, NULL);
 }
 
-const struct file_operations ppc_rtas_rmo_buf_ops = {
+static const struct file_operations ppc_rtas_rmo_buf_ops = {
 	.open		= rmo_buf_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 647f3e8677dc..c680f1bbd387 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -340,8 +340,8 @@ int rtas_get_error_log_max(void)
 EXPORT_SYMBOL(rtas_get_error_log_max);
 
 
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-int rtas_last_error_token;
+static char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+static int rtas_last_error_token;
 
 /** Return a copy of the detailed error text associated with the
  *  most recent failed call to rtas.  Because the error text
@@ -484,7 +484,7 @@ unsigned int rtas_busy_delay(int status)
 }
 EXPORT_SYMBOL(rtas_busy_delay);
 
-int rtas_error_rc(int rtas_rc)
+static int rtas_error_rc(int rtas_rc)
 {
 	int rc;
 
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 0a5e22b22729..09ded5c424a9 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -731,7 +731,7 @@ static const struct file_operations validate_flash_operations = {
 	.release	= validate_flash_release,
 };
 
-int __init rtas_flash_init(void)
+static int __init rtas_flash_init(void)
 {
 	int rc;
 
@@ -817,7 +817,7 @@ cleanup:
 	return rc;
 }
 
-void __exit rtas_flash_cleanup(void)
+static void __exit rtas_flash_cleanup(void)
 {
 	rtas_flash_term_hook = NULL;
 
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 3ab88a9dc70d..589a2797eac2 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -155,12 +155,12 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	return PCIBIOS_DEVICE_NOT_FOUND;
 }
 
-struct pci_ops rtas_pci_ops = {
+static struct pci_ops rtas_pci_ops = {
 	.read = rtas_pci_read_config,
 	.write = rtas_pci_write_config,
 };
 
-int is_python(struct device_node *dev)
+static int is_python(struct device_node *dev)
 {
 	const char *model = of_get_property(dev, "model", NULL);
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index db540eab09f4..61a3f4132087 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -500,6 +500,7 @@ void __init smp_setup_cpu_sibling_map(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PCSPKR_PLATFORM
 static __init int add_pcspkr(void)
 {
 	struct device_node *np;
@@ -522,6 +523,7 @@ static __init int add_pcspkr(void)
 	return ret;
 }
 device_initcall(add_pcspkr);
+#endif	/* CONFIG_PCSPKR_PLATFORM */
 
 void probe_machine(void)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 19e8fcb9cea8..4efebe88e64a 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -101,6 +101,10 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
 			  PTRRELOC(&__start___ftr_fixup),
 			  PTRRELOC(&__stop___ftr_fixup));
 
+	do_lwsync_fixups(spec->cpu_features,
+			 PTRRELOC(&__start___lwsync_fixup),
+			 PTRRELOC(&__stop___lwsync_fixup));
+
 	return KERNELBASE + offset;
 }
 
@@ -127,6 +131,11 @@ notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 		ppc_md.power_save = ppc6xx_idle;
 #endif
 
+#ifdef CONFIG_E500
+	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+	    cpu_has_feature(CPU_FTR_CAN_NAP))
+		ppc_md.power_save = e500_idle;
+#endif
 	if (ppc_md.progress)
 		ppc_md.progress("id mach(): done", 0x200);
 }
@@ -248,6 +257,28 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	/* interrupt stacks must be in lowmem, we get that for free on ppc32
+	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#ifdef CONFIG_BOOKE
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#endif
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /* Warning, IO base is not yet inited */
 void __init setup_arch(char **cmdline_p)
 {
@@ -305,6 +336,8 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
 
+	exc_lvl_early_init();
+
 	irqstack_early_init();
 
 	/* set up the bootmem stuff with available memory */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 098fd96a394a..04d8de9f0fc6 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -363,6 +363,8 @@ void __init setup_system(void)
 			  &__start___ftr_fixup, &__stop___ftr_fixup);
 	do_feature_fixups(powerpc_firmware_features,
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+	do_lwsync_fixups(cur_cpu_spec->cpu_features,
+			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index a65a44fbe523..ad55488939c3 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -120,7 +120,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	int ret;
 	int is32 = is_32bit_task();
 
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
 	else if (!oldset)
 		oldset = &current->blocked;
@@ -131,9 +131,10 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	check_syscall_restart(regs, &ka, signr > 0);
 
 	if (signr <= 0) {
+		struct thread_info *ti = current_thread_info();
 		/* No signal to deliver -- put the saved sigmask back */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		if (ti->local_flags & _TLF_RESTORE_SIGMASK) {
+			ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
 			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 		}
 		return 0;               /* no signals delivered */
@@ -169,10 +170,9 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 
 		/*
 		 * A signal was successfully delivered; the saved sigmask is in
-		 * its frame, and we can clear the TIF_RESTORE_SIGMASK flag.
+		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
 	}
 
 	return ret;
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 77efb3d5465a..28f4b9f5fe5e 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -24,6 +24,16 @@ extern int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 			      siginfo_t *info, sigset_t *oldset,
 			      struct pt_regs *regs);
 
+extern unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from);
+#ifdef CONFIG_VSX
+extern unsigned long copy_vsx_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_vsx_from_user(struct task_struct *task,
+					void __user *from);
+#endif
 
 #ifdef CONFIG_PPC64
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index ad6943468ee9..3e80aa32b8b0 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -68,6 +68,13 @@
 #define ucontext	ucontext32
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32))
+
+/*
  * Returning 0 means we return to userspace via
  * ret_from_except and thus restore all user
  * registers from *regs.  This is what we need
@@ -243,7 +250,7 @@ long sys_sigsuspend(old_sigset_t mask)
 
  	current->state = TASK_INTERRUPTIBLE;
  	schedule();
- 	set_thread_flag(TIF_RESTORE_SIGMASK);
+	set_restore_sigmask();
  	return -ERESTARTNOHAND;
 }
 
@@ -328,6 +335,75 @@ struct rt_sigframe {
 	int			abigap[56];
 };
 
+#ifdef CONFIG_VSX
+unsigned long copy_fpr_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		buf[i] = task->thread.TS_FPR(i);
+	memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
+	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_fpr_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		task->thread.TS_FPR(i) = buf[i];
+	memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
+
+	return 0;
+}
+
+unsigned long copy_vsx_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < ELF_NVSRHALFREG; i++)
+		buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
+	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_vsx_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < ELF_NVSRHALFREG ; i++)
+		task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	return 0;
+}
+#else
+inline unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task)
+{
+	return __copy_to_user(to, task->thread.fpr,
+			      ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from)
+{
+	return __copy_from_user(task->thread.fpr, from,
+			      ELF_NFPREG * sizeof(double));
+}
+#endif
+
 /*
  * Save the current user registers on the user stack.
  * We only save the altivec/spe registers if the process has used
@@ -336,13 +412,13 @@ struct rt_sigframe {
 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		int sigret)
 {
+	unsigned long msr = regs->msr;
+
 	/* Make sure floating point registers are stored in regs */
 	flush_fp_to_thread(current);
 
-	/* save general and floating-point registers */
-	if (save_general_regs(regs, frame) ||
-	    __copy_to_user(&frame->mc_fregs, current->thread.fpr,
-		    ELF_NFPREG * sizeof(double)))
+	/* save general registers */
+	if (save_general_regs(regs, frame))
 		return 1;
 
 #ifdef CONFIG_ALTIVEC
@@ -354,8 +430,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_VEC in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_VEC;
 	}
 	/* else assert((regs->msr & MSR_VEC) == 0) */
 
@@ -367,7 +442,22 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
-
+	if (copy_fpr_to_user(&frame->mc_fregs, current))
+		return 1;
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSR 0-31 upper half from thread_struct to local
+	 * buffer, then write that to userspace.  Also set MSR_VSX in
+	 * the saved MSR value to indicate that frame->mc_vregs
+	 * contains valid data
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		if (copy_vsx_to_user(&frame->mc_vsregs, current))
+			return 1;
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* save spe registers */
 	if (current->thread.used_spe) {
@@ -377,8 +467,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_SPE in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_SPE;
 	}
 	/* else assert((regs->msr & MSR_SPE) == 0) */
 
@@ -387,6 +476,8 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		return 1;
 #endif /* CONFIG_SPE */
 
+	if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
+		return 1;
 	if (sigret) {
 		/* Set up the sigreturn trampoline: li r0,sigret; sc */
 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
@@ -409,6 +500,9 @@ static long restore_user_regs(struct pt_regs *regs,
 	long err;
 	unsigned int save_r2 = 0;
 	unsigned long msr;
+#ifdef CONFIG_VSX
+	int i;
+#endif
 
 	/*
 	 * restore general registers but not including MSR or SOFTE. Also
@@ -436,16 +530,11 @@ static long restore_user_regs(struct pt_regs *regs,
 	 */
 	discard_lazy_cpu_state();
 
-	/* force the process to reload the FP registers from
-	   current->thread when it next does FP instructions */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
-	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
-			     sizeof(sr->mc_fregs)))
-		return 1;
-
 #ifdef CONFIG_ALTIVEC
-	/* force the process to reload the altivec registers from
-	   current->thread when it next does altivec instructions */
+	/*
+	 * Force the process to reload the altivec registers from
+	 * current->thread when it next does altivec instructions
+	 */
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
@@ -459,6 +548,31 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
+	if (copy_fpr_from_user(current, &sr->mc_fregs))
+		return 1;
+
+#ifdef CONFIG_VSX
+	/*
+	 * Force the process to reload the VSX registers from
+	 * current->thread when it next does VSX instruction.
+	 */
+	regs->msr &= ~MSR_VSX;
+	if (msr & MSR_VSX) {
+		/*
+		 * Restore altivec registers from the stack to a local
+		 * buffer, then write this out to the thread_struct
+		 */
+		if (copy_vsx_from_user(current, &sr->mc_vsregs))
+			return 1;
+	} else if (current->thread.used_vsr)
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
+#endif /* CONFIG_VSX */
+	/*
+	 * force the process to reload the FP registers from
+	 * current->thread when it next does FP instructions
+	 */
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
 
 #ifdef CONFIG_SPE
 	/* force the process to reload the spe registers from
@@ -823,12 +937,42 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 
+#ifdef CONFIG_PPC64
+	unsigned long new_msr = 0;
+
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
+	 */
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
+		return -EINVAL;
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
+#else
 	/* Context size is for future use. Right now, we only make sure
 	 * we are passed something we understand
 	 */
 	if (ctx_size < sizeof(struct ucontext))
 		return -EINVAL;
-
+#endif
 	if (old_ctx != NULL) {
 		struct mcontext __user *mctx;
 
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index da7c058e3731..65ad925c3a8f 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -112,11 +112,29 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 #else /* CONFIG_ALTIVEC */
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
+	flush_fp_to_thread(current);
+	/* copy fpr regs and fpscr */
+	err |= copy_fpr_to_user(&sc->fp_regs, current);
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSX low doubleword to local buffer for formatting,
+	 * then out to userspace.  Update v_regs to point after the
+	 * VMX data.
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		v_regs += ELF_NVRREG;
+		err |= copy_vsx_to_user(v_regs, current);
+		/* set MSR_VSX in the MSR value in the frame to
+		 * indicate that sc->vs_reg) contains valid data.
+		 */
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 	err |= __put_user(&sc->gp_regs, &sc->regs);
 	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
-	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);
 	err |= __put_user(handler, &sc->handler);
 	if (set != NULL)
@@ -137,29 +155,32 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 #endif
 	unsigned long err = 0;
 	unsigned long save_r13 = 0;
-	elf_greg_t *gregs = (elf_greg_t *)regs;
 	unsigned long msr;
+#ifdef CONFIG_VSX
 	int i;
+#endif
 
 	/* If this is not a signal return, we preserve the TLS in r13 */
 	if (!sig)
 		save_r13 = regs->gpr[13];
 
-	/* copy everything before MSR */
-	err |= __copy_from_user(regs, &sc->gp_regs,
-				PT_MSR*sizeof(unsigned long));
-
+	/* copy the GPRs */
+	err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr));
+	err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]);
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
-
+	err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]);
+	err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]);
+	err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]);
+	err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
+	err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
 	/* skip SOFTE */
-	for (i = PT_MSR+1; i <= PT_RESULT; i++) {
-		if (i == PT_SOFTE)
-			continue;
-		err |= __get_user(gregs[i], &sc->gp_regs[i]);
-	}
+	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
+	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
+	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
+	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
 	if (!sig)
 		regs->gpr[13] = save_r13;
@@ -180,9 +201,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
 	 */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
-
-	err |= __copy_from_user(&current->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
 
 #ifdef CONFIG_ALTIVEC
 	err |= __get_user(v_regs, &sc->v_regs);
@@ -202,7 +221,23 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	else
 		current->thread.vrsave = 0;
 #endif /* CONFIG_ALTIVEC */
+	/* restore floating point */
+	err |= copy_fpr_from_user(current, &sc->fp_regs);
+#ifdef CONFIG_VSX
+	/*
+	 * Get additional VSX data. Update v_regs to point after the
+	 * VMX data.  Copy VSX low doubleword from userspace to local
+	 * buffer for formatting, then into the taskstruct.
+	 */
+	v_regs += ELF_NVRREG;
+	if ((msr & MSR_VSX) != 0)
+		err |= copy_vsx_from_user(current, v_regs);
+	else
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
 
+#else
+#endif
 	return err;
 }
 
@@ -233,6 +268,13 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp)
 }
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - 32*sizeof(long))
+
+/*
  * Handle {get,set,swap}_context operations
  */
 int sys_swapcontext(struct ucontext __user *old_ctx,
@@ -241,13 +283,34 @@ int sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 	sigset_t set;
+	unsigned long new_msr = 0;
 
-	/* Context size is for future use. Right now, we only make sure
-	 * we are passed something we understand
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
 	 */
-	if (ctx_size < sizeof(struct ucontext))
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
 		return -EINVAL;
-
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
 	if (old_ctx != NULL) {
 		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
 		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5191b46a611e..f5ae9fa222ea 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -171,12 +171,8 @@ void smp_send_stop(void)
 	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
-extern struct gettimeofday_struct do_gtod;
-
 struct thread_info *current_set[NR_CPUS];
 
-DECLARE_PER_CPU(unsigned int, pvr);
-
 static void __devinit smp_store_cpu_info(int id)
 {
 	per_cpu(pvr, id) = mfspr(SPRN_PVR);
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
index 67d6f6890edc..c906c4bf6835 100644
--- a/arch/powerpc/kernel/softemu8xx.c
+++ b/arch/powerpc/kernel/softemu8xx.c
@@ -124,7 +124,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 	disp = instword & 0xffff;
 
 	ea = (u32 *)(regs->gpr[idxreg] + disp);
-	ip = (u32 *)&current->thread.fpr[flreg];
+	ip = (u32 *)&current->thread.TS_FPR(flreg);
 
 	switch ( inst )
 	{
@@ -168,7 +168,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 		break;
 	case FMR:
 		/* assume this is a fp move -- Cort */
-		memcpy(ip, &current->thread.fpr[(instword>>11)&0x1f],
+		memcpy(ip, &current->thread.TS_FPR((instword>>11)&0x1f),
 		       sizeof(double));
 		break;
 	default:
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 3cf0d94ba340..071bee3ec749 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -10,34 +10,35 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/module.h>
 #include <asm/ptrace.h>
+#include <asm/processor.h>
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
-void save_stack_trace(struct stack_trace *trace)
+static void save_context_stack(struct stack_trace *trace, unsigned long sp,
+			struct task_struct *tsk, int savesched)
 {
-	unsigned long sp;
-
-	asm("mr %0,1" : "=r" (sp));
-
 	for (;;) {
 		unsigned long *stack = (unsigned long *) sp;
 		unsigned long newsp, ip;
 
-		if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
 			return;
 
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 
-		if (!trace->skip)
-			trace->entries[trace->nr_entries++] = ip;
-		else
-			trace->skip--;
+		if (savesched || !in_sched_functions(ip)) {
+			if (!trace->skip)
+				trace->entries[trace->nr_entries++] = ip;
+			else
+				trace->skip--;
+		}
 
 		if (trace->nr_entries >= trace->max_entries)
 			return;
@@ -45,4 +46,19 @@ void save_stack_trace(struct stack_trace *trace)
 		sp = newsp;
 	}
 }
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long sp;
+
+	asm("mr %0,1" : "=r" (sp));
+
+	save_context_stack(trace, sp, current, 1);
+}
 EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	save_context_stack(trace, tsk->thread.regs->gpr[1], tsk, 0);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 4fe69ca24481..c04832c4a02e 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -143,6 +143,9 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 	struct file * file = NULL;
 	unsigned long ret = -EINVAL;
 
+	if (!arch_validate_prot(prot))
+		goto out;
+
 	if (shift) {
 		if (off & ((1 << shift) - 1))
 			goto out;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index f1a38a6c1e2d..e2ee66b5831d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -129,7 +129,7 @@ static unsigned long __initdata iSeries_recal_titan;
 static signed long __initdata iSeries_recal_tb;
 
 /* Forward declaration is only needed for iSereis compiles */
-void __init clocksource_init(void);
+static void __init clocksource_init(void);
 #endif
 
 #define XSEC_PER_SEC (1024*1024)
@@ -150,8 +150,8 @@ u64 tb_to_xs;
 unsigned tb_to_us;
 
 #define TICKLEN_SCALE	NTP_SCALE_SHIFT
-u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
-u64 ticklen_to_xs;	/* 0.64 fraction */
+static u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
+static u64 ticklen_to_xs;	/* 0.64 fraction */
 
 /* If last_tick_len corresponds to about 1/HZ seconds, then
    last_tick_len << TICKLEN_SHIFT will be about 2^63. */
@@ -164,7 +164,7 @@ static u64 tb_to_ns_scale __read_mostly;
 static unsigned tb_to_ns_shift __read_mostly;
 static unsigned long boot_tb __read_mostly;
 
-struct gettimeofday_struct do_gtod;
+static struct gettimeofday_struct do_gtod;
 
 extern struct timezone sys_tz;
 static long timezone_offset;
@@ -742,10 +742,6 @@ void __init generic_calibrate_decr(void)
 	}
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
 	/* Clear any pending timer interrupts */
 	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
 
@@ -832,7 +828,7 @@ void update_vsyscall_tz(void)
 	++vdso_data->tb_update_count;
 }
 
-void __init clocksource_init(void)
+static void __init clocksource_init(void)
 {
 	struct clocksource *clock;
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4b5b7ff4f78b..878fbddb6ae1 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -967,6 +967,20 @@ void altivec_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
 }
 
+void vsx_unavailable_exception(struct pt_regs *regs)
+{
+	if (user_mode(regs)) {
+		/* A user program has executed an vsx instruction,
+		   but this kernel doesn't support vsx. */
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+
+	printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception "
+			"%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
+}
+
 void performance_monitor_exception(struct pt_regs *regs)
 {
 	perf_irq(regs);
@@ -1030,21 +1044,29 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
+void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
 	if (debug_status & DBSR_IC) {	/* instruction completion */
 		regs->msr &= ~MSR_DE;
+
+		/* Disable instruction completion */
+		mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+		/* Clear the instruction completion event */
+		mtspr(SPRN_DBSR, DBSR_IC);
+
+		if (notify_die(DIE_SSTEP, "single_step", regs, 5,
+			       5, SIGTRAP) == NOTIFY_STOP) {
+			return;
+		}
+
+		if (debugger_sstep(regs))
+			return;
+
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
-		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
 		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+
+		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
@@ -1091,6 +1113,21 @@ void altivec_assist_exception(struct pt_regs *regs)
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+void vsx_assist_exception(struct pt_regs *regs)
+{
+	if (!user_mode(regs)) {
+		printk(KERN_EMERG "VSX assist exception in kernel mode"
+		       " at %lx\n", regs->nip);
+		die("Kernel VSX assist exception", regs, SIGILL);
+	}
+
+	flush_vsx_to_thread(current);
+	printk(KERN_INFO "VSX assist not supported at %lx\n", regs->nip);
+	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_FSL_BOOKE
 void CacheLockingException(struct pt_regs *regs, unsigned long address,
 			   unsigned long error_code)
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ce245a850db2..f177c60ea766 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -571,6 +571,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 	if (start64)
 		do_feature_fixups(powerpc_firmware_features,
 				  start64, start64 + size64);
+
+	start64 = find_section64(v64->hdr, "__lwsync_fixup", &size64);
+	if (start64)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start64, start64 + size64);
 #endif /* CONFIG_PPC64 */
 
 	start32 = find_section32(v32->hdr, "__ftr_fixup", &size32);
@@ -585,6 +590,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 				  start32, start32 + size32);
 #endif /* CONFIG_PPC64 */
 
+	start32 = find_section32(v32->hdr, "__lwsync_fixup", &size32);
+	if (start32)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start32, start32 + size32);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 9352ab5200e5..be3b6a41dc09 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 	}
 	PROVIDE(__etext = .);
 	PROVIDE(_etext = .);
@@ -33,6 +33,9 @@ SECTIONS
 	. = ALIGN(8);
 	__ftr_fixup	: { *(__ftr_fixup) }
 
+	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index 932b3fdb34b9..d0b2526dd38d 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 		*(.sfpr .glink)
 	}						:text
 	PROVIDE(__etext = .);
@@ -35,6 +35,9 @@ SECTIONS
 	__ftr_fixup	: { *(__ftr_fixup) }
 
 	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
+	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
 
 	/*
@@ -43,15 +46,15 @@ SECTIONS
 	.rodata		: { *(.rodata .rodata.* .gnu.linkonce.r.*) }
 	.rodata1	: { *(.rodata1) }
 
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
 	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
 	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
 	.gcc_except_table : { *(.gcc_except_table) }
+	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
 
 	.opd ALIGN(8)	: { KEEP (*(.opd)) }
 	.got ALIGN(8)	: { *(.got .toc) }
-	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
-
-	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
 	_end = .;
 	PROVIDE(end = .);
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 53d57d17a894..87a72c66ce27 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -35,7 +35,7 @@ SECTIONS
 		ALIGN_FUNCTION();
 		*(.text.head)
 		_text = .;
-		*(.text .fixup .text.init.refok .exit.text.refok)
+		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
@@ -125,6 +125,12 @@ SECTIONS
 		*(__ftr_fixup)
 		__stop___ftr_fixup = .;
 	}
+	. = ALIGN(8);
+	__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
+		__start___lwsync_fixup = .;
+		*(__lwsync_fixup)
+		__stop___lwsync_fixup = .;
+	}
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e522b06cc42f..2a88e8b9a3c6 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -24,3 +24,7 @@ obj-$(CONFIG_SMP)	+= locks.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
+
+obj-y			+= code-patching.o
+obj-y			+= feature-fixups.o
+obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
new file mode 100644
index 000000000000..0559fe086eb4
--- /dev/null
+++ b/arch/powerpc/lib/code-patching.c
@@ -0,0 +1,448 @@
+/*
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/code-patching.h>
+
+
+void patch_instruction(unsigned int *addr, unsigned int instr)
+{
+	*addr = instr;
+	asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
+}
+
+void patch_branch(unsigned int *addr, unsigned long target, int flags)
+{
+	patch_instruction(addr, create_branch(addr, target, flags));
+}
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x2000000 || offset > 0x1fffffc || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x48000000 | (flags & 0x3) | (offset & 0x03FFFFFC);
+
+	return instruction;
+}
+
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x40000000 | (flags & 0x3FF0003) | (offset & 0xFFFC);
+
+	return instruction;
+}
+
+static unsigned int branch_opcode(unsigned int instr)
+{
+	return (instr >> 26) & 0x3F;
+}
+
+static int instr_is_branch_iform(unsigned int instr)
+{
+	return branch_opcode(instr) == 18;
+}
+
+static int instr_is_branch_bform(unsigned int instr)
+{
+	return branch_opcode(instr) == 16;
+}
+
+int instr_is_relative_branch(unsigned int instr)
+{
+	if (instr & BRANCH_ABSOLUTE)
+		return 0;
+
+	return instr_is_branch_iform(instr) || instr_is_branch_bform(instr);
+}
+
+static unsigned long branch_iform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0x3FFFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x2000000)
+		imm -= 0x4000000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+static unsigned long branch_bform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0xFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x8000)
+		imm -= 0x10000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+unsigned long branch_target(const unsigned int *instr)
+{
+	if (instr_is_branch_iform(*instr))
+		return branch_iform_target(instr);
+	else if (instr_is_branch_bform(*instr))
+		return branch_bform_target(instr);
+
+	return 0;
+}
+
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr)
+{
+	if (instr_is_branch_iform(*instr) || instr_is_branch_bform(*instr))
+		return branch_target(instr) == addr;
+
+	return 0;
+}
+
+unsigned int translate_branch(const unsigned int *dest, const unsigned int *src)
+{
+	unsigned long target;
+
+	target = branch_target(src);
+
+	if (instr_is_branch_iform(*src))
+		return create_branch(dest, target, *src);
+	else if (instr_is_branch_bform(*src))
+		return create_cond_branch(dest, target, *src);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_CODE_PATCHING_SELFTEST
+
+static void __init test_trampoline(void)
+{
+	asm ("nop;\n");
+}
+
+#define check(x)	\
+	if (!(x)) printk("code-patching: test failed at line %d\n", __LINE__);
+
+static void __init test_branch_iform(void)
+{
+	unsigned int instr;
+	unsigned long addr;
+
+	addr = (unsigned long)&instr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_iform(0x48000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_iform(0x4bffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0xcbffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0x7bffffff));
+
+	/* Simplest case, branch to self with link */
+	check(instr_is_branch_iform(0x48000001));
+	/* All bits of targets set */
+	check(instr_is_branch_iform(0x4bfffffd));
+	/* Some bits of targets set */
+	check(instr_is_branch_iform(0x4bff00fd));
+	/* Must be a valid branch to start with */
+	check(!instr_is_branch_iform(0x7bfffffd));
+
+	/* Absolute branch to 0x100 */
+	instr = 0x48000103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute branch to 0x420fc */
+	instr = 0x480420ff;
+	check(instr_is_branch_to_addr(&instr, 0x420fc));
+	/* Maximum positive relative branch, + 20MB - 4B */
+	instr = 0x49fffffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x1FFFFFC));
+	/* Smallest negative relative branch, - 4B */
+	instr = 0x4bfffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative branch, - 32 MB */
+	instr = 0x4a000000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Branch to self, with link */
+	instr = create_branch(&instr, addr, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100, with link */
+	instr = create_branch(&instr, addr - 0x100, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100, no link */
+	instr = create_branch(&instr, addr + 0x100, 0);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 MB */
+	instr = create_branch(&instr, addr - 0x2000000, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Out of range relative negative offset, - 32 MB + 4*/
+	instr = create_branch(&instr, addr - 0x2000004, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 MB */
+	instr = create_branch(&instr, addr + 0x2000000, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_branch(&instr, addr + 3, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_branch(&instr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x48000000);
+}
+
+static void __init test_create_function_call(void)
+{
+	unsigned int *iptr;
+	unsigned long dest;
+
+	/* Check we can create a function call */
+	iptr = (unsigned int *)ppc_function_entry(test_trampoline);
+	dest = ppc_function_entry(test_create_function_call);
+	patch_instruction(iptr, create_branch(iptr, dest, BRANCH_SET_LINK));
+	check(instr_is_branch_to_addr(iptr, dest));
+}
+
+static void __init test_branch_bform(void)
+{
+	unsigned long addr;
+	unsigned int *iptr, instr, flags;
+
+	iptr = &instr;
+	addr = (unsigned long)iptr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_bform(0x40000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_bform(0x43ffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0xc3ffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0x7bffffff));
+
+	/* Absolute conditional branch to 0x100 */
+	instr = 0x43ff0103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute conditional branch to 0x20fc */
+	instr = 0x43ff20ff;
+	check(instr_is_branch_to_addr(&instr, 0x20fc));
+	/* Maximum positive relative conditional branch, + 32 KB - 4B */
+	instr = 0x43ff7ffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x7FFC));
+	/* Smallest negative relative conditional branch, - 4B */
+	instr = 0x43fffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative conditional branch, - 32 KB */
+	instr = 0x43ff8000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* All condition code bits set & link */
+	flags = 0x3ff000 | BRANCH_SET_LINK;
+
+	/* Branch to self */
+	instr = create_cond_branch(iptr, addr, flags);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100 */
+	instr = create_cond_branch(iptr, addr - 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100 */
+	instr = create_cond_branch(iptr, addr + 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 KB */
+	instr = create_cond_branch(iptr, addr - 0x8000, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* Out of range relative negative offset, - 32 KB + 4*/
+	instr = create_cond_branch(iptr, addr - 0x8004, flags);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 KB */
+	instr = create_cond_branch(iptr, addr + 0x8000, flags);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_cond_branch(iptr, addr + 3, flags);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_cond_branch(iptr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x43FF0000);
+}
+
+static void __init test_translate_branch(void)
+{
+	unsigned long addr;
+	unsigned int *p, *q;
+	void *buf;
+
+	buf = vmalloc(PAGE_ALIGN(0x2000000 + 1));
+	check(buf);
+	if (!buf)
+		return;
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 MB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 0x2000000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x4a000000);
+
+	/* Maximum positive case, move x to x - 32 MB + 4 */
+	p = buf + 0x2000000;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x49fffffc);
+
+	/* Jump to x + 16 MB moved to x + 20 MB */
+	p = buf;
+	addr = 0x1000000 + (unsigned long)buf;
+	patch_branch(p, addr, BRANCH_SET_LINK);
+	q = buf + 0x1400000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 16 MB moved to x - 16 MB + 4 */
+	p = buf + 0x1000000;
+	addr = 0x2000000 + (unsigned long)buf;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+
+	/* Conditional branch tests */
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 KB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 0x8000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff8000);
+
+	/* Maximum positive case, move x to x - 32 KB + 4 */
+	p = buf + 0x8000;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff7ffc);
+
+	/* Jump to x + 12 KB moved to x + 20 KB */
+	p = buf;
+	addr = 0x3000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, BRANCH_SET_LINK));
+	q = buf + 0x5000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 8 KB moved to x - 8 KB + 4 */
+	p = buf + 0x2000;
+	addr = 0x4000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Free the buffer we were using */
+	vfree(buf);
+}
+
+static int __init test_code_patching(void)
+{
+	printk(KERN_DEBUG "Running code patching self-tests ...\n");
+
+	test_branch_iform();
+	test_branch_bform();
+	test_create_function_call();
+	test_translate_branch();
+
+	return 0;
+}
+late_initcall(test_code_patching);
+
+#endif /* CONFIG_CODE_PATCHING_SELFTEST */
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 6656d47841d0..5d83907f6591 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -348,8 +348,15 @@ void __dma_sync(void *vaddr, size_t size, int direction)
 	switch (direction) {
 	case DMA_NONE:
 		BUG();
-	case DMA_FROM_DEVICE:	/* invalidate only */
-		invalidate_dcache_range(start, end);
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
 		clean_dcache_range(start, end);
diff --git a/arch/powerpc/lib/feature-fixups-test.S b/arch/powerpc/lib/feature-fixups-test.S
new file mode 100644
index 000000000000..cb737484c5aa
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups-test.S
@@ -0,0 +1,742 @@
+/*
+ * Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/feature-fixups.h>
+#include <asm/ppc_asm.h>
+#include <asm/synch.h>
+
+	.text
+
+#define globl(x)		\
+	.globl x;	\
+x:
+
+globl(ftr_fixup_test1)
+	or	1,1,1
+	or	2,2,2	/* fixup will nop out this instruction */
+	or	3,3,3
+
+globl(end_ftr_fixup_test1)
+
+globl(ftr_fixup_test1_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test1_expected)
+	or	1,1,1
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test2)
+	or	1,1,1
+	or	2,2,2	/* fixup will replace this with ftr_fixup_test2_alt */
+	or	3,3,3
+
+globl(end_ftr_fixup_test2)
+
+globl(ftr_fixup_test2_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test2_alt)
+	or	31,31,31
+
+globl(ftr_fixup_test2_expected)
+	or	1,1,1
+	or	31,31,31
+	or	3,3,3
+
+globl(ftr_fixup_test3)
+	or	1,1,1
+	or	2,2,2	/* fixup will fail to replace this */
+	or	3,3,3
+
+globl(end_ftr_fixup_test3)
+
+globl(ftr_fixup_test3_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test3_alt)
+	or	31,31,31
+	or	31,31,31
+
+globl(ftr_fixup_test4)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(end_ftr_fixup_test4)
+
+globl(ftr_fixup_test4_expected)
+	or	1,1,1
+	or	31,31,31
+	or	31,31,31
+	nop
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test4_orig)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test4_alt)
+	or	31,31,31
+	or	31,31,31
+
+
+globl(ftr_fixup_test5)
+	or	1,1,1
+BEGIN_FTR_SECTION
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+FTR_SECTION_ELSE
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+ALT_FTR_SECTION_END(0, 1)
+	or	1,1,1
+
+globl(end_ftr_fixup_test5)
+
+globl(ftr_fixup_test5_expected)
+	or	1,1,1
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+	or	1,1,1
+
+globl(ftr_fixup_test6)
+1:	or	1,1,1
+BEGIN_FTR_SECTION
+	or	5,5,5
+2:	PPC_LCMPI	r3,0
+	beq	4f
+	blt	2b
+	b	1b
+	b	4f
+FTR_SECTION_ELSE
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+ALT_FTR_SECTION_END(0, 1)
+3:	or	1,1,1
+	or	2,2,2
+4:	or	3,3,3
+
+globl(end_ftr_fixup_test6)
+
+globl(ftr_fixup_test6_expected)
+1:	or	1,1,1
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+2:	or	1,1,1
+	or	2,2,2
+3:	or	3,3,3
+
+
+#define	MAKE_MACRO_TEST(TYPE)						\
+globl(ftr_fixup_test_ ##TYPE##_macros)					\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE 							\
+BEGIN_##TYPE##_SECTION_NESTED(94) 					\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94) 					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;
+
+#define	MAKE_MACRO_TEST_EXPECTED(TYPE)					\
+globl(ftr_fixup_test_ ##TYPE##_macros_expected)				\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+	/* NB. inner section is not nop'ed, but then entire outer is */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	nop;								\
+	nop;								\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	3,3,3; */						\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	5,5,5;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	or	5,5,5;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;
+
+MAKE_MACRO_TEST(FTR);
+MAKE_MACRO_TEST_EXPECTED(FTR);
+
+#ifdef CONFIG_PPC64
+MAKE_MACRO_TEST(FW_FTR);
+MAKE_MACRO_TEST_EXPECTED(FW_FTR);
+#endif
+
+globl(lwsync_fixup_test)
+1:	or	1,1,1
+	LWSYNC
+globl(end_lwsync_fixup_test)
+
+globl(lwsync_fixup_test_expected_LWSYNC)
+1:	or	1,1,1
+	lwsync
+
+globl(lwsync_fixup_test_expected_SYNC)
+1:	or	1,1,1
+	sync
+
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
new file mode 100644
index 000000000000..4e43702b9813
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -0,0 +1,351 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/cputable.h>
+#include <asm/code-patching.h>
+
+
+struct fixup_entry {
+	unsigned long	mask;
+	unsigned long	value;
+	long		start_off;
+	long		end_off;
+	long		alt_start_off;
+	long		alt_end_off;
+};
+
+static unsigned int *calc_addr(struct fixup_entry *fcur, long offset)
+{
+	/*
+	 * We store the offset to the code as a negative offset from
+	 * the start of the alt_entry, to support the VDSO. This
+	 * routine converts that back into an actual address.
+	 */
+	return (unsigned int *)((unsigned long)fcur + offset);
+}
+
+static int patch_alt_instruction(unsigned int *src, unsigned int *dest,
+				 unsigned int *alt_start, unsigned int *alt_end)
+{
+	unsigned int instr;
+
+	instr = *src;
+
+	if (instr_is_relative_branch(*src)) {
+		unsigned int *target = (unsigned int *)branch_target(src);
+
+		/* Branch within the section doesn't need translating */
+		if (target < alt_start || target >= alt_end) {
+			instr = translate_branch(dest, src);
+			if (!instr)
+				return 1;
+		}
+	}
+
+	patch_instruction(dest, instr);
+
+	return 0;
+}
+
+static int patch_feature_section(unsigned long value, struct fixup_entry *fcur)
+{
+	unsigned int *start, *end, *alt_start, *alt_end, *src, *dest;
+
+	start = calc_addr(fcur, fcur->start_off);
+	end = calc_addr(fcur, fcur->end_off);
+	alt_start = calc_addr(fcur, fcur->alt_start_off);
+	alt_end = calc_addr(fcur, fcur->alt_end_off);
+
+	if ((alt_end - alt_start) > (end - start))
+		return 1;
+
+	if ((value & fcur->mask) == fcur->value)
+		return 0;
+
+	src = alt_start;
+	dest = start;
+
+	for (; src < alt_end; src++, dest++) {
+		if (patch_alt_instruction(src, dest, alt_start, alt_end))
+			return 1;
+	}
+
+	for (; dest < end; dest++)
+		patch_instruction(dest, PPC_NOP_INSTR);
+
+	return 0;
+}
+
+void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	struct fixup_entry *fcur, *fend;
+
+	fcur = fixup_start;
+	fend = fixup_end;
+
+	for (; fcur < fend; fcur++) {
+		if (patch_feature_section(value, fcur)) {
+			__WARN();
+			printk("Unable to patch feature section at %p - %p" \
+				" with %p - %p\n",
+				calc_addr(fcur, fcur->start_off),
+				calc_addr(fcur, fcur->end_off),
+				calc_addr(fcur, fcur->alt_start_off),
+				calc_addr(fcur, fcur->alt_end_off));
+		}
+	}
+}
+
+void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	unsigned int *start, *end, *dest;
+
+	if (!(value & CPU_FTR_LWSYNC))
+		return ;
+
+	start = fixup_start;
+	end = fixup_end;
+
+	for (; start < end; start++) {
+		dest = (void *)start + *start;
+		patch_instruction(dest, PPC_LWSYNC_INSTR);
+	}
+}
+
+#ifdef CONFIG_FTR_FIXUP_SELFTEST
+
+#define check(x)	\
+	if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__);
+
+/* This must be after the text it fixes up, vmlinux.lds.S enforces that atm */
+static struct fixup_entry fixup;
+
+static long calc_offset(struct fixup_entry *entry, unsigned int *p)
+{
+	return (unsigned long)p - (unsigned long)entry;
+}
+
+void test_basic_patching(void)
+{
+	extern unsigned int ftr_fixup_test1;
+	extern unsigned int end_ftr_fixup_test1;
+	extern unsigned int ftr_fixup_test1_orig;
+	extern unsigned int ftr_fixup_test1_expected;
+	int size = &end_ftr_fixup_test1 - &ftr_fixup_test1;
+
+	fixup.value = fixup.mask = 8;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test1 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test1 + 2);
+	fixup.alt_start_off = fixup.alt_end_off = 0;
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test1, &ftr_fixup_test1_orig, size);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+	patch_feature_section(~8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+}
+
+static void test_alternative_patching(void)
+{
+	extern unsigned int ftr_fixup_test2;
+	extern unsigned int end_ftr_fixup_test2;
+	extern unsigned int ftr_fixup_test2_orig;
+	extern unsigned int ftr_fixup_test2_alt;
+	extern unsigned int ftr_fixup_test2_expected;
+	int size = &end_ftr_fixup_test2 - &ftr_fixup_test2;
+
+	fixup.value = fixup.mask = 0xF;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test2 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test2 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test2_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test2_alt + 1);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test2, &ftr_fixup_test2_orig, size);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+	patch_feature_section(~0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+}
+
+static void test_alternative_case_too_big(void)
+{
+	extern unsigned int ftr_fixup_test3;
+	extern unsigned int end_ftr_fixup_test3;
+	extern unsigned int ftr_fixup_test3_orig;
+	extern unsigned int ftr_fixup_test3_alt;
+	int size = &end_ftr_fixup_test3 - &ftr_fixup_test3;
+
+	fixup.value = fixup.mask = 0xC;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test3 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test3 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test3_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test3_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+
+	/* Expect nothing to be patched, and the error returned to us */
+	check(patch_feature_section(0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(0, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(~0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+}
+
+static void test_alternative_case_too_small(void)
+{
+	extern unsigned int ftr_fixup_test4;
+	extern unsigned int end_ftr_fixup_test4;
+	extern unsigned int ftr_fixup_test4_orig;
+	extern unsigned int ftr_fixup_test4_alt;
+	extern unsigned int ftr_fixup_test4_expected;
+	int size = &end_ftr_fixup_test4 - &ftr_fixup_test4;
+	unsigned long flag;
+
+	/* Check a high-bit flag */
+	flag = 1UL << ((sizeof(unsigned long) - 1) * 8);
+	fixup.value = fixup.mask = flag;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test4 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test4 + 5);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test4_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test4_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test4, &ftr_fixup_test4_orig, size);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+	patch_feature_section(~flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+}
+
+static void test_alternative_case_with_branch(void)
+{
+	extern unsigned int ftr_fixup_test5;
+	extern unsigned int end_ftr_fixup_test5;
+	extern unsigned int ftr_fixup_test5_expected;
+	int size = &end_ftr_fixup_test5 - &ftr_fixup_test5;
+
+	check(memcmp(&ftr_fixup_test5, &ftr_fixup_test5_expected, size) == 0);
+}
+
+static void test_alternative_case_with_external_branch(void)
+{
+	extern unsigned int ftr_fixup_test6;
+	extern unsigned int end_ftr_fixup_test6;
+	extern unsigned int ftr_fixup_test6_expected;
+	int size = &end_ftr_fixup_test6 - &ftr_fixup_test6;
+
+	check(memcmp(&ftr_fixup_test6, &ftr_fixup_test6_expected, size) == 0);
+}
+
+static void test_cpu_macros(void)
+{
+	extern void ftr_fixup_test_FTR_macros;
+	extern void ftr_fixup_test_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
+			     &ftr_fixup_test_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FTR_macros,
+		     &ftr_fixup_test_FTR_macros_expected, size) == 0);
+}
+
+static void test_fw_macros(void)
+{
+#ifdef CONFIG_PPC64
+	extern void ftr_fixup_test_FW_FTR_macros;
+	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
+			     &ftr_fixup_test_FW_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FW_FTR_macros,
+		     &ftr_fixup_test_FW_FTR_macros_expected, size) == 0);
+#endif
+}
+
+static void test_lwsync_macros(void)
+{
+	extern void lwsync_fixup_test;
+	extern void end_lwsync_fixup_test;
+	extern void lwsync_fixup_test_expected_LWSYNC;
+	extern void lwsync_fixup_test_expected_SYNC;
+	unsigned long size = &end_lwsync_fixup_test -
+			     &lwsync_fixup_test;
+
+	/* The fixups have already been done for us during boot */
+	if (cur_cpu_spec->cpu_features & CPU_FTR_LWSYNC) {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_LWSYNC, size) == 0);
+	} else {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_SYNC, size) == 0);
+	}
+}
+
+static int __init test_feature_fixups(void)
+{
+	printk(KERN_DEBUG "Running feature fixup self-tests ...\n");
+
+	test_basic_patching();
+	test_alternative_patching();
+	test_alternative_case_too_big();
+	test_alternative_case_too_small();
+	test_alternative_case_with_branch();
+	test_alternative_case_with_external_branch();
+	test_cpu_macros();
+	test_fw_macros();
+	test_lwsync_macros();
+
+	return 0;
+}
+late_initcall(test_feature_fixups);
+
+#endif /* CONFIG_FTR_FIXUP_SELFTEST */
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 381306bb1590..29e545e0272e 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -230,14 +230,14 @@ do_mathemu(struct pt_regs *regs)
 	case LFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		break;
 	case LFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
@@ -245,21 +245,21 @@ do_mathemu(struct pt_regs *regs)
 	case STFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		break;
 	case STFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
 		break;
 	case OP63:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		fmr(op0, op1, op2, op3);
 		break;
 	default:
@@ -356,28 +356,28 @@ do_mathemu(struct pt_regs *regs)
 
 	switch (type) {
 	case AB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case AC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case ABC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case D:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		break;
 
@@ -387,27 +387,27 @@ do_mathemu(struct pt_regs *regs)
 			goto illegal;
 
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)(regs->gpr[idx] + sdisp);
 		break;
 
 	case X:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		break;
 
 	case XA:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
 		break;
 
 	case XB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XE:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		if (!idx) {
 			if (((insn >> 1) & 0x3ff) == STFIWX)
 				op1 = (void *)(regs->gpr[(insn >> 11) & 0x1f]);
@@ -421,7 +421,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XEU:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0)
 				+ regs->gpr[(insn >> 11) & 0x1f]);
 		break;
@@ -429,8 +429,8 @@ do_mathemu(struct pt_regs *regs)
 	case XCR:
 		op0 = (void *)&regs->ccr;
 		op1 = (void *)((insn >> 23) & 0x7);
-		op2 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op2 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XCRL:
@@ -450,7 +450,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XFLB:
 		op0 = (void *)((insn >> 17) & 0xff);
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	default:
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 953fb919eb06..98052ac96580 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -27,6 +27,7 @@
 #include <asm/mmu.h>
 #include <asm/system.h>
 #include <asm/page.h>
+#include <asm/cacheflush.h>
 
 #include "mmu_decl.h"
 
@@ -37,11 +38,35 @@ unsigned int tlb_44x_index; /* = 0 */
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
+static void __init ppc44x_update_tlb_hwater(void)
+{
+	extern unsigned int tlb_44x_patch_hwater_D[];
+	extern unsigned int tlb_44x_patch_hwater_I[];
+
+	/* The TLB miss handlers hard codes the watermark in a cmpli
+	 * instruction to improve performances rather than loading it
+	 * from the global variable. Thus, we patch the instructions
+	 * in the 2 TLB miss handlers when updating the value
+	 */
+	tlb_44x_patch_hwater_D[0] = (tlb_44x_patch_hwater_D[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_D[0],
+			   (unsigned long)&tlb_44x_patch_hwater_D[1]);
+	tlb_44x_patch_hwater_I[0] = (tlb_44x_patch_hwater_I[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_I[0],
+			   (unsigned long)&tlb_44x_patch_hwater_I[1]);
+}
+
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
  */
 static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
+	unsigned int entry = tlb_44x_hwater--;
+
+	ppc44x_update_tlb_hwater();
+
 	__asm__ __volatile__(
 		"tlbwe	%2,%3,%4\n"
 		"tlbwe	%1,%3,%5\n"
@@ -50,7 +75,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
+	  "r" (entry),
 	  "i" (PPC44x_TLB_PAGEID),
 	  "i" (PPC44x_TLB_XLAT),
 	  "i" (PPC44x_TLB_ATTRIB));
@@ -58,6 +83,8 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 
 void __init MMU_init_hw(void)
 {
+	ppc44x_update_tlb_hwater();
+
 	flush_instruction_cache();
 }
 
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 7b2510799266..1707d00331fc 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -306,7 +306,8 @@ good_area:
 					flush_dcache_icache_page(page);
 					set_bit(PG_arch_1, &page->flags);
 				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
+				pte_update(ptep, 0, _PAGE_HWEXEC |
+					   _PAGE_ACCESSED);
 				_tlbie(address, mm->context.id);
 				pte_unmap_unlock(ptep, ptl);
 				up_read(&mm->mmap_sem);
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 70f4c833fa32..a719f53921a5 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -388,7 +388,7 @@ _GLOBAL(__hash_page_4K)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	oris	r30,r30,_PAGE_COMBO@h
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
@@ -468,7 +468,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	 * go to out-of-line code to try to modify the HPTE. We look for
 	 * the bit at (1 >> (index + 32))
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	li	r26,0			/* Default hidx */
 	beq	htab_insert_pte
 
@@ -726,11 +726,11 @@ BEGIN_FTR_SECTION
 	bne-	ht64_bail_ok
 END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY,HASHPTE and ACCESSED)
+	 * add BUSY and ACCESSED)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
 	bne-	1b
@@ -798,18 +798,21 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* Check if we may already be in the hashtable, in this case, we
 	 * go to out-of-line code to try to modify the HPTE
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	bne	ht64_modify_pte
 
 ht64_insert_pte:
 	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HASHPTE
+	 * add _PAGE_HPTE_SUB0
 	 */
 	lis	r0,_PAGE_HPTEFLAGS@h
 	ori	r0,r0,_PAGE_HPTEFLAGS@l
 	andc	r30,r30,r0
+#ifdef CONFIG_PPC_64K_PAGES
+	oris	r30,r30,_PAGE_HPTE_SUB0@h
+#else
 	ori	r30,r30,_PAGE_HASHPTE
-
+#endif
 	/* Phyical address in r5 */
 	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
 	sldi	r5,r5,PAGE_SHIFT
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 0f2d239d94c4..8d3b58ebd38e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(linear_map_hash_lock);
 
 /* Pre-POWER4 CPUs (4k pages only)
  */
-struct mmu_psize_def mmu_psize_defaults_old[] = {
+static struct mmu_psize_def mmu_psize_defaults_old[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -134,7 +134,7 @@ struct mmu_psize_def mmu_psize_defaults_old[] = {
  *
  * Support for 16Mb large pages
  */
-struct mmu_psize_def mmu_psize_defaults_gp[] = {
+static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -533,8 +533,6 @@ void __init htab_initialize(void)
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
-	extern unsigned long tce_alloc_start, tce_alloc_end;
-
 	DBG(" -> htab_initialize()\n");
 
 	/* Initialize segment sizes */
@@ -697,6 +695,28 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 	return pp;
 }
 
+#ifdef CONFIG_PPC_MM_SLICES
+unsigned int get_paca_psize(unsigned long addr)
+{
+	unsigned long index, slices;
+
+	if (addr < SLICE_LOW_TOP) {
+		slices = get_paca()->context.low_slices_psize;
+		index = GET_LOW_SLICE_INDEX(addr);
+	} else {
+		slices = get_paca()->context.high_slices_psize;
+		index = GET_HIGH_SLICE_INDEX(addr);
+	}
+	return (slices >> (index * 4)) & 0xF;
+}
+
+#else
+unsigned int get_paca_psize(unsigned long addr)
+{
+	return get_paca()->context.user_psize;
+}
+#endif
+
 /*
  * Demote a segment to using 4k pages.
  * For now this makes the whole process use 4k pages.
@@ -704,13 +724,13 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 #ifdef CONFIG_PPC_64K_PAGES
 void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
 {
-	if (mm->context.user_psize == MMU_PAGE_4K)
+	if (get_slice_psize(mm, addr) == MMU_PAGE_4K)
 		return;
-	slice_set_user_psize(mm, MMU_PAGE_4K);
+	slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
-	if (get_paca()->context.user_psize != MMU_PAGE_4K) {
+	if (get_paca_psize(addr) != MMU_PAGE_4K) {
 		get_paca()->context = mm->context;
 		slb_flush_and_rebolt();
 	}
@@ -794,11 +814,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 			DBG_LOW(" user region with no mm !\n");
 			return 1;
 		}
-#ifdef CONFIG_PPC_MM_SLICES
 		psize = get_slice_psize(mm, ea);
-#else
-		psize = mm->context.user_psize;
-#endif
 		ssize = user_segment_size(ea);
 		vsid = get_vsid(mm->context.id, ea, ssize);
 		break;
@@ -870,7 +886,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
-	if (pte_val(*ptep) & _PAGE_4K_PFN) {
+	if ((pte_val(*ptep) & _PAGE_4K_PFN) && psize == MMU_PAGE_64K) {
 		demote_segment_4k(mm, ea);
 		psize = MMU_PAGE_4K;
 	}
@@ -899,7 +915,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		}
 	}
 	if (user_region) {
-		if (psize != get_paca()->context.user_psize) {
+		if (psize != get_paca_psize(ea)) {
 			get_paca()->context = mm->context;
 			slb_flush_and_rebolt();
 		}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a02266dad215..0d12fba31bc5 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -458,8 +458,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 		old_pte = pte_val(*ptep);
 		if (old_pte & _PAGE_BUSY)
 			goto out;
-		new_pte = old_pte | _PAGE_BUSY |
-			_PAGE_ACCESSED | _PAGE_HASHPTE;
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -499,12 +498,14 @@ repeat:
 			      HPTES_PER_GROUP) & ~0x7UL;
 
 		/* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-
+#endif
 		/* Add in WIMG bits */
-		/* XXX We should store these in the pte */
-		/* --BenH: I think they are ... */
-		rflags |= _PAGE_COHERENT;
+		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+				      _PAGE_COHERENT | _PAGE_GUARDED));
 
 		/* Insert into the hash table, primary slot */
 		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 1952b4d3fa7f..388ceda632f3 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -43,6 +43,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/system.h>
 
 #include "mmu_decl.h"
 
@@ -56,8 +57,8 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long total_memory;
-unsigned long total_lowmem;
+phys_addr_t total_memory;
+phys_addr_t total_lowmem;
 
 phys_addr_t memstart_addr = (phys_addr_t)~0ull;
 EXPORT_SYMBOL(memstart_addr);
@@ -76,8 +77,6 @@ void MMU_init(void);
 /* XXX should be in current.h  -- paulus */
 extern struct task_struct *current_set[NR_CPUS];
 
-extern int init_bootmem_done;
-
 /*
  * this tells the system to map all of ram with the segregs
  * (i.e. page tables) instead of the bats.
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6aa65375abf5..6ef63caca682 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -185,7 +185,7 @@ void pgtable_cache_init(void)
  * do this by hand as the proffered address may not be correctly aligned.
  * Subtraction of non-aligned pointers produces undefined results.
  */
-unsigned long __meminit vmemmap_section_start(unsigned long page)
+static unsigned long __meminit vmemmap_section_start(unsigned long page)
 {
 	unsigned long offset = page - ((unsigned long)(vmemmap));
 
@@ -198,7 +198,7 @@ unsigned long __meminit vmemmap_section_start(unsigned long page)
  * which overlaps this vmemmap page is initialised then this page is
  * initialised already.
  */
-int __meminit vmemmap_populated(unsigned long start, int page_size)
+static int __meminit vmemmap_populated(unsigned long start, int page_size)
 {
 	unsigned long end = start + page_size;
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 51f82d83bf14..1ca2235f0965 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -44,6 +44,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/sparsemem.h>
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
 
@@ -329,7 +330,7 @@ static int __init mark_nonram_nosave(void)
 void __init paging_init(void)
 {
 	unsigned long total_ram = lmb_phys_mem_size();
-	unsigned long top_of_ram = lmb_end_of_DRAM();
+	phys_addr_t top_of_ram = lmb_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -348,10 +349,10 @@ void __init paging_init(void)
 	kmap_prot = PAGE_KERNEL;
 #endif /* CONFIG_HIGHMEM */
 
-	printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
-	       top_of_ram, total_ram);
+	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
+	       (u64)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
-	       (top_of_ram - total_ram) >> 20);
+	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 #ifdef CONFIG_HIGHMEM
 	max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 04802252a64f..fab3cfad4099 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -29,7 +29,7 @@ extern void hash_preload(struct mm_struct *mm, unsigned long ea,
 #ifdef CONFIG_PPC32
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
+extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
 extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		      unsigned int size, int flags, unsigned int pid);
@@ -49,8 +49,8 @@ extern unsigned int num_tlbcam_entries;
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
 extern phys_addr_t __initial_memory_limit_addr;
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
+extern phys_addr_t total_memory;
+extern phys_addr_t total_lowmem;
 extern phys_addr_t memstart_addr;
 extern phys_addr_t lowmem_end_addr;
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index dc704da363eb..cf4bffba6f7c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -268,6 +268,144 @@ static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
 	return result;
 }
 
+struct of_drconf_cell {
+	u64	base_addr;
+	u32	drc_index;
+	u32	reserved;
+	u32	aa_index;
+	u32	flags;
+};
+
+#define DRCONF_MEM_ASSIGNED	0x00000008
+#define DRCONF_MEM_AI_INVALID	0x00000040
+#define DRCONF_MEM_RESERVED	0x00000080
+
+/*
+ * Read the next lmb list entry from the ibm,dynamic-memory property
+ * and return the information in the provided of_drconf_cell structure.
+ */
+static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
+{
+	const u32 *cp;
+
+	drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp);
+
+	cp = *cellp;
+	drmem->drc_index = cp[0];
+	drmem->reserved = cp[1];
+	drmem->aa_index = cp[2];
+	drmem->flags = cp[3];
+
+	*cellp = cp + 4;
+}
+
+/*
+ * Retreive and validate the ibm,dynamic-memory property of the device tree.
+ *
+ * The layout of the ibm,dynamic-memory property is a number N of lmb
+ * list entries followed by N lmb list entries.  Each lmb list entry
+ * contains information as layed out in the of_drconf_cell struct above.
+ */
+static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
+{
+	const u32 *prop;
+	u32 len, entries;
+
+	prop = of_get_property(memory, "ibm,dynamic-memory", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	entries = *prop++;
+
+	/* Now that we know the number of entries, revalidate the size
+	 * of the property read in to ensure we have everything
+	 */
+	if (len < (entries * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int))
+		return 0;
+
+	*dm = prop;
+	return entries;
+}
+
+/*
+ * Retreive and validate the ibm,lmb-size property for drconf memory
+ * from the device tree.
+ */
+static u64 of_get_lmb_size(struct device_node *memory)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,lmb-size", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	return read_n_cells(n_mem_size_cells, &prop);
+}
+
+struct assoc_arrays {
+	u32	n_arrays;
+	u32	array_sz;
+	const u32 *arrays;
+};
+
+/*
+ * Retreive and validate the list of associativity arrays for drconf
+ * memory from the ibm,associativity-lookup-arrays property of the
+ * device tree..
+ *
+ * The layout of the ibm,associativity-lookup-arrays property is a number N
+ * indicating the number of associativity arrays, followed by a number M
+ * indicating the size of each associativity array, followed by a list
+ * of N associativity arrays.
+ */
+static int of_get_assoc_arrays(struct device_node *memory,
+			       struct assoc_arrays *aa)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
+	if (!prop || len < 2 * sizeof(unsigned int))
+		return -1;
+
+	aa->n_arrays = *prop++;
+	aa->array_sz = *prop++;
+
+	/* Now that we know the number of arrrays and size of each array,
+	 * revalidate the size of the property read in.
+	 */
+	if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
+		return -1;
+
+	aa->arrays = prop;
+	return 0;
+}
+
+/*
+ * This is like of_node_to_nid_single() for memory represented in the
+ * ibm,dynamic-reconfiguration-memory node.
+ */
+static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
+				   struct assoc_arrays *aa)
+{
+	int default_nid = 0;
+	int nid = default_nid;
+	int index;
+
+	if (min_common_depth > 0 && min_common_depth <= aa->array_sz &&
+	    !(drmem->flags & DRCONF_MEM_AI_INVALID) &&
+	    drmem->aa_index < aa->n_arrays) {
+		index = drmem->aa_index * aa->array_sz + min_common_depth - 1;
+		nid = aa->arrays[index];
+
+		if (nid == 0xffff || nid >= MAX_NUMNODES)
+			nid = default_nid;
+	}
+
+	return nid;
+}
+
 /*
  * Figure out to which domain a cpu belongs and stick it there.
  * Return the id of the domain used.
@@ -355,57 +493,50 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const unsigned int *lm, *dm, *aa;
-	unsigned int ls, ld, la;
-	unsigned int n, aam, aalen;
-	unsigned long lmb_size, size, start;
-	int nid, default_nid = 0;
-	unsigned int ai, flags;
-
-	lm = of_get_property(memory, "ibm,lmb-size", &ls);
-	dm = of_get_property(memory, "ibm,dynamic-memory", &ld);
-	aa = of_get_property(memory, "ibm,associativity-lookup-arrays", &la);
-	if (!lm || !dm || !aa ||
-	    ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
-	    la < 2 * sizeof(unsigned int))
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size, size;
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
 		return;
 
-	lmb_size = read_n_cells(n_mem_size_cells, &lm);
-	n = *dm++;		/* number of LMBs */
-	aam = *aa++;		/* number of associativity lists */
-	aalen = *aa++;		/* length of each associativity list */
-	if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
-	    la < (aam * aalen + 2) * sizeof(unsigned int))
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
 		return;
 
 	for (; n != 0; --n) {
-		start = read_n_cells(n_mem_addr_cells, &dm);
-		ai = dm[2];
-		flags = dm[3];
-		dm += 4;
-		/* 0x80 == reserved, 0x8 = assigned to us */
-		if ((flags & 0x80) || !(flags & 0x8))
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if the reserved bit is set in flags (0x80)
+		   or if the block is not assigned to this partition (0x8) */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
 			continue;
-		nid = default_nid;
-		/* flags & 0x40 means associativity index is invalid */
-		if (min_common_depth > 0 && min_common_depth <= aalen &&
-		    (flags & 0x40) == 0 && ai < aam) {
-			/* this is like of_node_to_nid_single */
-			nid = aa[ai * aalen + min_common_depth - 1];
-			if (nid == 0xffff || nid >= MAX_NUMNODES)
-				nid = default_nid;
-		}
 
-		fake_numa_create_new_node(((start + lmb_size) >> PAGE_SHIFT),
-						&nid);
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		fake_numa_create_new_node(
+				((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
+					   &nid);
+
 		node_set_online(nid);
 
-		size = numa_enforce_memory_limit(start, lmb_size);
+		size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
 		if (!size)
 			continue;
 
-		add_active_range(nid, start >> PAGE_SHIFT,
-				 (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+		add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
+				 (drmem.base_addr >> PAGE_SHIFT)
+				 + (size >> PAGE_SHIFT));
 	}
 }
 
@@ -770,6 +901,79 @@ early_param("numa", early_numa);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
+ * Validate the node associated with the memory section we are
+ * trying to add.
+ */
+int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size,
+		      unsigned long scn_addr)
+{
+	nodemask_t nodes;
+
+	if (*nid < 0 || !node_online(*nid))
+		*nid = any_online_node(NODE_MASK_ALL);
+
+	if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) {
+		nodes_setall(nodes);
+		while (NODE_DATA(*nid)->node_spanned_pages == 0) {
+			node_clear(*nid, nodes);
+			*nid = any_online_node(nodes);
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Find the node associated with a hot added memory section represented
+ * by the ibm,dynamic-reconfiguration-memory node.
+ */
+static int hot_add_drconf_scn_to_nid(struct device_node *memory,
+				     unsigned long scn_addr)
+{
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size;
+	int default_nid = any_online_node(NODE_MASK_ALL);
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return default_nid;;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
+		return default_nid;
+
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
+		return default_nid;
+
+	for (; n != 0; --n) {
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if it is reserved or not assigned to
+		 * this partition */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
+			continue;
+
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size,
+				      scn_addr))
+			return nid;
+	}
+
+	BUG();	/* section address should be found above */
+	return 0;
+}
+
+/*
  * Find the node associated with a hot added memory section.  Section
  * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
  * sections are fully contained within a single LMB.
@@ -777,12 +981,17 @@ early_param("numa", early_numa);
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
 	struct device_node *memory = NULL;
-	nodemask_t nodes;
-	int default_nid = any_online_node(NODE_MASK_ALL);
 	int nid;
 
 	if (!numa_enabled || (min_common_depth < 0))
-		return default_nid;
+		return any_online_node(NODE_MASK_ALL);
+
+	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (memory) {
+		nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
+		of_node_put(memory);
+		return nid;
+	}
 
 	while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
 		unsigned long start, size;
@@ -801,13 +1010,9 @@ ha_new_range:
 		size = read_n_cells(n_mem_size_cells, &memcell_buf);
 		nid = of_node_to_nid_single(memory);
 
-		/* Domains not present at boot default to 0 */
-		if (nid < 0 || !node_online(nid))
-			nid = default_nid;
-
-		if ((scn_addr >= start) && (scn_addr < (start + size))) {
+		if (valid_hot_add_scn(&nid, start, size, scn_addr)) {
 			of_node_put(memory);
-			goto got_nid;
+			return nid;
 		}
 
 		if (--ranges)		/* process all ranges in cell */
@@ -815,14 +1020,5 @@ ha_new_range:
 	}
 	BUG();	/* section address should be found above */
 	return 0;
-
-	/* Temporary code to ensure that returned node is not empty */
-got_nid:
-	nodes_setall(nodes);
-	while (NODE_DATA(nid)->node_spanned_pages == 0) {
-		node_clear(nid, nodes);
-		nid = any_online_node(nodes);
-	}
-	return nid;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index e0ff59f21135..c7584072dfcc 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -53,9 +53,9 @@ extern void hash_page_sync(void);
 #endif
 
 #ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
+extern phys_addr_t v_mapped_by_bats(unsigned long va);
+extern unsigned long p_mapped_by_bats(phys_addr_t pa);
+void setbat(int index, unsigned long virt, phys_addr_t phys,
 	    unsigned int size, int flags);
 
 #else /* !HAVE_BATS */
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index cef9f156874b..c53145f61942 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -38,21 +38,18 @@ struct hash_pte *Hash, *Hash_end;
 unsigned long Hash_size, Hash_mask;
 unsigned long _SDR1;
 
-union ubat {			/* BAT register values to be loaded */
-	struct ppc_bat bat;
-	u32	word[2];
-} BATS[8][2];			/* 8 pairs of IBAT, DBAT */
+struct ppc_bat BATS[8][2];	/* 8 pairs of IBAT, DBAT */
 
 struct batrange {		/* stores address ranges mapped by BATs */
 	unsigned long start;
 	unsigned long limit;
-	unsigned long phys;
+	phys_addr_t phys;
 } bat_addrs[8];
 
 /*
  * Return PA for this VA if it is mapped by a BAT, or 0
  */
-unsigned long v_mapped_by_bats(unsigned long va)
+phys_addr_t v_mapped_by_bats(unsigned long va)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -64,7 +61,7 @@ unsigned long v_mapped_by_bats(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_bats(unsigned long pa)
+unsigned long p_mapped_by_bats(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -119,12 +116,12 @@ unsigned long __init mmu_mapin_ram(void)
  * The parameters are not checked; in particular size must be a power
  * of 2 between 128k and 256M.
  */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
+void __init setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags)
 {
 	unsigned int bl;
 	int wimgxpp;
-	union ubat *bat = BATS[index];
+	struct ppc_bat *bat = BATS[index];
 
 	if (((flags & _PAGE_NO_CACHE) == 0) &&
 	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
@@ -137,15 +134,15 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
 				   | _PAGE_COHERENT | _PAGE_GUARDED);
 		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
+		bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+		bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
 #ifndef CONFIG_KGDB /* want user access for breakpoints */
 		if (flags & _PAGE_USER)
 #endif
-			bat[1].bat.batu.vp = 1;
+			bat[1].batu |= 1; 	/* Vp = 1 */
 		if (flags & _PAGE_GUARDED) {
 			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
+			bat[0].batu = bat[0].batl = 0;
 		} else {
 			/* make IBAT same as DBAT */
 			bat[0] = bat[1];
@@ -158,8 +155,8 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 				   | _PAGE_COHERENT);
 		wimgxpp |= (flags & _PAGE_RW)?
 			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
+		bat->batu = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
+		bat->batl = phys | bl | 0x40;	/* V=1 */
 	}
 
 	bat_addrs[index].start = virt;
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 2bd12d965db1..db44e02e045b 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -215,10 +215,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 		  mm->context.high_slices_psize);
 
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
-	mb();
 
-	/* XXX this is sub-optimal but will do for now */
-	on_each_cpu(slice_flush_segments, mm, 1);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
@@ -384,17 +381,34 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
 		return slice_find_area_bottomup(mm, len, mask, psize, use_cache);
 }
 
+#define or_mask(dst, src)	do {			\
+	(dst).low_slices |= (src).low_slices;		\
+	(dst).high_slices |= (src).high_slices;		\
+} while (0)
+
+#define andnot_mask(dst, src)	do {			\
+	(dst).low_slices &= ~(src).low_slices;		\
+	(dst).high_slices &= ~(src).high_slices;	\
+} while (0)
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define MMU_PAGE_BASE	MMU_PAGE_64K
+#else
+#define MMU_PAGE_BASE	MMU_PAGE_4K
+#endif
+
 unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 				      unsigned long flags, unsigned int psize,
 				      int topdown, int use_cache)
 {
-	struct slice_mask mask;
+	struct slice_mask mask = {0, 0};
 	struct slice_mask good_mask;
 	struct slice_mask potential_mask = {0,0} /* silence stupid warning */;
-	int pmask_set = 0;
+	struct slice_mask compat_mask = {0, 0};
 	int fixed = (flags & MAP_FIXED);
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	struct mm_struct *mm = current->mm;
+	unsigned long newaddr;
 
 	/* Sanity checks */
 	BUG_ON(mm->task_size == 0);
@@ -416,21 +430,48 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	if (!fixed && addr) {
 		addr = _ALIGN_UP(addr, 1ul << pshift);
 		slice_dbg(" aligned addr=%lx\n", addr);
+		/* Ignore hint if it's too large or overlaps a VMA */
+		if (addr > mm->task_size - len ||
+		    !slice_area_is_free(mm, addr, len))
+			addr = 0;
 	}
 
-	/* First makeup a "good" mask of slices that have the right size
+	/* First make up a "good" mask of slices that have the right size
 	 * already
 	 */
 	good_mask = slice_mask_for_size(mm, psize);
 	slice_print_mask(" good_mask", good_mask);
 
-	/* First check hint if it's valid or if we have MAP_FIXED */
-	if ((addr != 0 || fixed) && (mm->task_size - len) >= addr) {
+	/*
+	 * Here "good" means slices that are already the right page size,
+	 * "compat" means slices that have a compatible page size (i.e.
+	 * 4k in a 64k pagesize kernel), and "free" means slices without
+	 * any VMAs.
+	 *
+	 * If MAP_FIXED:
+	 *	check if fits in good | compat => OK
+	 *	check if fits in good | compat | free => convert free
+	 *	else bad
+	 * If have hint:
+	 *	check if hint fits in good => OK
+	 *	check if hint fits in good | free => convert free
+	 * Otherwise:
+	 *	search in good, found => OK
+	 *	search in good | free, found => convert free
+	 *	search in good | compat | free, found => convert free.
+	 */
 
-		/* Don't bother with hint if it overlaps a VMA */
-		if (!fixed && !slice_area_is_free(mm, addr, len))
-			goto search;
+#ifdef CONFIG_PPC_64K_PAGES
+	/* If we support combo pages, we can allow 64k pages in 4k slices */
+	if (psize == MMU_PAGE_64K) {
+		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		if (fixed)
+			or_mask(good_mask, compat_mask);
+	}
+#endif
 
+	/* First check hint if it's valid or if we have MAP_FIXED */
+	if (addr != 0 || fixed) {
 		/* Build a mask for the requested range */
 		mask = slice_range_to_mask(addr, len);
 		slice_print_mask(" mask", mask);
@@ -442,54 +483,66 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 			slice_dbg(" fits good !\n");
 			return addr;
 		}
-
-		/* We don't fit in the good mask, check what other slices are
-		 * empty and thus can be converted
+	} else {
+		/* Now let's see if we can find something in the existing
+		 * slices for that size
 		 */
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
-		if (slice_check_fit(mask, potential_mask)) {
-			slice_dbg(" fits potential !\n");
-			goto convert;
+		newaddr = slice_find_area(mm, len, good_mask, psize, topdown,
+					  use_cache);
+		if (newaddr != -ENOMEM) {
+			/* Found within the good mask, we don't have to setup,
+			 * we thus return directly
+			 */
+			slice_dbg(" found area at 0x%lx\n", newaddr);
+			return newaddr;
 		}
 	}
 
-	/* If we have MAP_FIXED and failed the above step, then error out */
+	/* We don't fit in the good mask, check what other slices are
+	 * empty and thus can be converted
+	 */
+	potential_mask = slice_mask_for_free(mm);
+	or_mask(potential_mask, good_mask);
+	slice_print_mask(" potential", potential_mask);
+
+	if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) {
+		slice_dbg(" fits potential !\n");
+		goto convert;
+	}
+
+	/* If we have MAP_FIXED and failed the above steps, then error out */
 	if (fixed)
 		return -EBUSY;
 
- search:
 	slice_dbg(" search...\n");
 
-	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	/* If we had a hint that didn't work out, see if we can fit
+	 * anywhere in the good area.
 	 */
-	addr = slice_find_area(mm, len, good_mask, psize, topdown, use_cache);
-	if (addr != -ENOMEM) {
-		/* Found within the good mask, we don't have to setup,
-		 * we thus return directly
-		 */
-		slice_dbg(" found area at 0x%lx\n", addr);
-		return addr;
-	}
-
-	/* Won't fit, check what can be converted */
-	if (!pmask_set) {
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
+	if (addr) {
+		addr = slice_find_area(mm, len, good_mask, psize, topdown,
+				       use_cache);
+		if (addr != -ENOMEM) {
+			slice_dbg(" found area at 0x%lx\n", addr);
+			return addr;
+		}
 	}
 
 	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	 * for that size plus free slices
 	 */
 	addr = slice_find_area(mm, len, potential_mask, psize, topdown,
 			       use_cache);
+
+#ifdef CONFIG_PPC_64K_PAGES
+	if (addr == -ENOMEM && psize == MMU_PAGE_64K) {
+		/* retry the search with 4k-page slices included */
+		or_mask(potential_mask, compat_mask);
+		addr = slice_find_area(mm, len, potential_mask, psize,
+				       topdown, use_cache);
+	}
+#endif
+
 	if (addr == -ENOMEM)
 		return -ENOMEM;
 
@@ -498,7 +551,13 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	slice_print_mask(" mask", mask);
 
  convert:
-	slice_convert(mm, mask, psize);
+	andnot_mask(mask, good_mask);
+	andnot_mask(mask, compat_mask);
+	if (mask.low_slices || mask.high_slices) {
+		slice_convert(mm, mask, psize);
+		if (psize > MMU_PAGE_BASE)
+			on_each_cpu(slice_flush_segments, mm, 1);
+	}
 	return addr;
 
 }
@@ -598,6 +657,36 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
 }
 
+void slice_set_psize(struct mm_struct *mm, unsigned long address,
+		     unsigned int psize)
+{
+	unsigned long i, flags;
+	u64 *p;
+
+	spin_lock_irqsave(&slice_convert_lock, flags);
+	if (address < SLICE_LOW_TOP) {
+		i = GET_LOW_SLICE_INDEX(address);
+		p = &mm->context.low_slices_psize;
+	} else {
+		i = GET_HIGH_SLICE_INDEX(address);
+		p = &mm->context.high_slices_psize;
+	}
+	*p = (*p & ~(0xful << (i * 4))) | ((unsigned long) psize << (i * 4));
+	spin_unlock_irqrestore(&slice_convert_lock, flags);
+
+#ifdef CONFIG_SPU_BASE
+	spu_flush_all_slbs(mm);
+#endif
+}
+
+void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+			   unsigned long len, unsigned int psize)
+{
+	struct slice_mask mask = slice_range_to_mask(start, len);
+
+	slice_convert(mm, mask, psize);
+}
+
 /*
  * is_hugepage_only_range() is used by generic code to verify wether
  * a normal mmap mapping (non hugetlbfs) is valid on a given area.
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index efbbd13d93e5..60e6032a8088 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -30,8 +30,8 @@ struct stab_entry {
 };
 
 #define NR_STAB_CACHE_ENTRIES 8
-DEFINE_PER_CPU(long, stab_cache_ptr);
-DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long, stab_cache_ptr);
+static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
 
 /*
  * Create a segment table entry for the given esid/vsid pair.
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index 69ad829a7fa3..a01b5c608ff9 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -37,8 +37,8 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
  * include/asm-powerpc/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
+static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
+static unsigned long pte_freelist_forced_free;
 
 struct pte_freelist_batch
 {
@@ -47,9 +47,6 @@ struct pte_freelist_batch
 	pgtable_free_t	tables[0];
 };
 
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
-
 #define PTE_FREELIST_SIZE \
 	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
 	  / sizeof(pgtable_free_t))
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 6abe91357eee..249ba01c6674 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -17,6 +17,15 @@ config EBONY
 	help
 	  This option enables support for the IBM PPC440GP evaluation board.
 
+config SAM440EP
+        bool "Sam440ep"
+	depends on 44x
+        default n
+        select 440EP
+        select PCI
+        help
+          This option enables support for the ACube Sam440ep board.
+
 config SEQUOIA
 	bool "Sequoia"
 	depends on 44x
@@ -102,6 +111,22 @@ config YOSEMITE
 #	help
 #	  This option enables support for the IBM PPC440GX evaluation board.
 
+config XILINX_VIRTEX440_GENERIC_BOARD
+	bool "Generic Xilinx Virtex 440 board"
+	depends on 44x
+	default n
+	select XILINX_VIRTEX_5_FXT
+	help
+	  This option enables generic support for Xilinx Virtex based boards
+	  that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
+
+	  The generic virtex board support matches any device tree which
+	  specifies 'xlnx,virtex440' in its compatible field.  This includes
+	  the Xilinx ML5xx reference designs using the powerpc core.
+
+	  Most Virtex 5 designs should use this unless it needs to do some
+	  special configuration at board probe time.
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
@@ -152,3 +177,13 @@ config 460EX
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
+
+# Xilinx specific config options.
+config XILINX_VIRTEX
+	bool
+
+# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
+config XILINX_VIRTEX_5_FXT
+	bool
+	select XILINX_VIRTEX
+
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 774165f9acdd..8d0b1a192d62 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,9 +3,11 @@ obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_TAISHAN)	+= taishan.o
 obj-$(CONFIG_BAMBOO)	+= bamboo.o
 obj-$(CONFIG_YOSEMITE)	+= bamboo.o
+obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
 obj-$(CONFIG_KATMAI)	+= katmai.o
 obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_CANYONLANDS) += canyonlands.o
+obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/sam440ep.c b/arch/powerpc/platforms/44x/sam440ep.c
new file mode 100644
index 000000000000..47f10e647735
--- /dev/null
+++ b/arch/powerpc/platforms/44x/sam440ep.c
@@ -0,0 +1,79 @@
+/*
+ * Sam440ep board specific routines based off bamboo.c code
+ * original copyrights below
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * Modified from bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <linux/i2c.h>
+
+static __initdata struct of_device_id sam440ep_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init sam440ep_device_probe(void)
+{
+	of_platform_bus_probe(NULL, sam440ep_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(sam440ep, sam440ep_device_probe);
+
+static int __init sam440ep_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "acube,sam440ep"))
+		return 0;
+
+	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+	return 1;
+}
+
+define_machine(sam440ep) {
+	.name 			= "Sam440ep",
+	.probe 			= sam440ep_probe,
+	.progress 		= udbg_progress,
+	.init_IRQ 		= uic_init_tree,
+	.get_irq 		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr 	= generic_calibrate_decr,
+};
+
+static struct i2c_board_info sam440ep_rtc_info = {
+	.type = "m41st85",
+	.addr = 0x68,
+	.irq = -1,
+};
+
+static int sam440ep_setup_rtc(void)
+{
+	return i2c_register_board_info(0, &sam440ep_rtc_info, 1);
+}
+machine_device_initcall(sam440ep, sam440ep_setup_rtc);
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
new file mode 100644
index 000000000000..68637faf70ae
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * Xilinx Virtex 5FXT based board support, derived from
+ * the Xilinx Virtex (IIpro & 4FX) based board support
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/xilinx_intc.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+#include "44x.h"
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "xlnx,plb-v46-1.00.a", },
+	{ .compatible = "xlnx,plb-v46-1.02.a", },
+	{ .compatible = "xlnx,plb-v34-1.01.a", },
+	{ .compatible = "xlnx,plb-v34-1.02.a", },
+	{ .compatible = "xlnx,opb-v20-1.10.c", },
+	{ .compatible = "xlnx,dcr-v29-1.00.a", },
+	{ .compatible = "xlnx,compound", },
+	{}
+};
+
+static int __init virtex_device_probe(void)
+{
+	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(virtex, virtex_device_probe);
+
+static int __init virtex_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "xlnx,virtex440"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(virtex) {
+	.name			= "Xilinx Virtex440",
+	.probe			= virtex_probe,
+	.init_IRQ		= xilinx_intc_init_tree,
+	.get_irq		= xilinx_intc_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= ppc4xx_reset_system,
+};
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 9150318cfc56..e55746b824b4 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,8 +11,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/ndfc.h>
+#include <linux/of.h>
 #include <asm/machdep.h>
 
+
 #ifdef CONFIG_MTD_NAND_NDFC
 
 #define CS_NAND_0	1	/* use chip select 1 for NAND device 0 */
@@ -35,13 +37,23 @@ static struct mtd_partition nand_parts[] = {
 	{
 		.name   = "root",
 		.offset = 0x0200000,
-		.size   = 0x3400000
+		.size   = 0x3E00000
+	},
+	{
+		.name   = "persistent",
+		.offset = 0x4000000,
+		.size   = 0x4000000
 	},
 	{
-		.name   = "user",
-		.offset = 0x3600000,
-		.size   = 0x0A00000
+		.name   = "persistent1",
+		.offset = 0x8000000,
+		.size   = 0x4000000
 	},
+	{
+		.name   = "persistent2",
+		.offset = 0xC000000,
+		.size   = 0x4000000
+	}
 };
 
 struct ndfc_controller_settings warp_ndfc_settings = {
@@ -67,27 +79,22 @@ static struct platform_device warp_ndfc_device = {
 	.resource = &warp_ndfc,
 };
 
-static struct nand_ecclayout nand_oob_16 = {
-	.eccbytes = 3,
-	.eccpos = { 0, 1, 2, 3, 6, 7 },
-	.oobfree = { {.offset = 8, .length = 16} }
-};
-
+/* Do NOT set the ecclayout: let it default so it is correct for both
+ * 64M and 256M flash chips.
+ */
 static struct platform_nand_chip warp_nand_chip0 = {
 	.nr_chips = 1,
 	.chip_offset = CS_NAND_0,
 	.nr_partitions = ARRAY_SIZE(nand_parts),
 	.partitions = nand_parts,
-	.chip_delay = 50,
-	.ecclayout = &nand_oob_16,
+	.chip_delay = 20,
 	.priv = &warp_chip0_settings,
 };
 
 static struct platform_device warp_nand_device = {
 	.name = "ndfc-chip",
 	.id = 0,
-	.num_resources = 1,
-	.resource = &warp_ndfc,
+	.num_resources = 0,
 	.dev = {
 		.platform_data = &warp_nand_chip0,
 		.parent = &warp_ndfc_device.dev,
@@ -96,6 +103,28 @@ static struct platform_device warp_nand_device = {
 
 static int warp_setup_nand_flash(void)
 {
+	struct device_node *np;
+
+	/* Try to detect a rev A based on NOR size. */
+	np = of_find_compatible_node(NULL, NULL, "cfi-flash");
+	if (np) {
+		struct property *pp;
+
+		pp = of_find_property(np, "reg", NULL);
+		if (pp && (pp->length == 12)) {
+			u32 *v = pp->value;
+			if (v[2] == 0x4000000) {
+				/* Rev A = 64M NAND */
+				warp_nand_chip0.nr_partitions = 3;
+
+				nand_parts[1].size   = 0x3000000;
+				nand_parts[2].offset = 0x3200000;
+				nand_parts[2].size   = 0x0e00000;
+			}
+		}
+		of_node_put(np);
+	}
+
 	platform_device_register(&warp_ndfc_device);
 	platform_device_register(&warp_nand_device);
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 39cf6150a72b..9565995cba7f 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -12,6 +12,9 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -27,6 +30,18 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+	{ I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+	/* This should go away once support is moved to the dts. */
+	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+	return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -52,61 +67,232 @@ define_machine(warp) {
 };
 
 
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED   (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+	struct device_node *np;
+	void __iomem *fpga;
+	u32 post1, post2;
+
+	/* Sighhhh... POST information is in the sd area. */
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+	if (np == NULL)
+		return -ENOENT;
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (fpga == NULL)
+		return -ENOENT;
+
+	post1 = in_be32(fpga + 0x40);
+	post2 = in_be32(fpga + 0x44);
+
+	iounmap(fpga);
+
+	if (post1 || post2)
+		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+	else
+		printk(KERN_INFO "Warp POST OK\n");
+
+	return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
+
+
+struct dtm_shutdown {
+	struct list_head list;
+	void (*func)(void *arg);
+	void *arg;
+};
 
 
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
 {
-	static void __iomem *gpio_base = NULL;
-	unsigned leds;
-
-	if (gpio_base == NULL) {
-		struct device_node *np;
-
-		/* Power LEDS are on the second GPIO controller */
-		np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
-		if (np)
-			np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
-		if (np == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
-			return;
+	struct dtm_shutdown *shutdown;
+
+	shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+	if (shutdown == NULL)
+		return -ENOMEM;
+
+	shutdown->func = func;
+	shutdown->arg = arg;
+
+	list_add(&shutdown->list, &dtm_shutdown_list);
+
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	struct dtm_shutdown *shutdown;
+
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		if (shutdown->func == func && shutdown->arg == arg) {
+			list_del(&shutdown->list);
+			kfree(shutdown);
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+	struct dtm_shutdown *shutdown;
+
+	local_irq_disable();
+
+	/* Run through the shutdown list. */
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		shutdown->func(shutdown->arg);
+
+	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+	while (1) {
+		if (dtm_fpga) {
+			unsigned reset = in_be32(dtm_fpga + 0x14);
+			out_be32(dtm_fpga + 0x14, reset);
 		}
 
-		gpio_base = of_iomap(np, 0);
-		of_node_put(np);
-		if (gpio_base == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to map gpio");
-			return;
+		if (gpio_base) {
+			unsigned leds = in_be32(gpio_base);
+
+			/* green off, red toggle */
+			leds &= ~0x80000000;
+			leds ^=  0x40000000;
+
+			out_be32(gpio_base, leds);
 		}
+
+		mdelay(500);
+	}
+}
+
+static int pika_setup_leds(void)
+{
+	struct device_node *np;
+	const u32 *gpios;
+	int len;
+
+	np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
+		return -ENOENT;
 	}
 
-	leds = in_be32(gpio_base);
+	gpios = of_get_property(np, "gpios", &len);
+	of_node_put(np);
+	if (!gpios || len < 4) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to get gpios property (%d)\n", len);
+		return -ENOENT;
+	}
 
-	switch (green) {
-	case 0: leds &= ~LED_GREEN; break;
-	case 1: leds |=  LED_GREEN; break;
+	np = of_find_node_by_phandle(gpios[0]);
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+		return -ENOENT;
 	}
-	switch (red) {
-	case 0: leds &= ~LED_RED; break;
-	case 1: leds |=  LED_RED; break;
+
+	gpio_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!gpio_base) {
+		printk(KERN_ERR __FILE__ ": Unable to map gpio");
+		return -ENOMEM;
 	}
 
-	out_be32(gpio_base, leds);
+	return 0;
 }
-EXPORT_SYMBOL(warp_set_power_leds);
 
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+	struct device_node *np;
+	int irq, rc;
+
+	/* Do this before enabling critical temp interrupt since we
+	 * may immediately interrupt.
+	 */
+	pika_setup_leds();
+
+	/* These registers are in 1 degree increments. */
+	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL) {
+		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if (irq  == NO_IRQ) {
+		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+		return;
+	}
+
+	rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+	if (rc) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+		return;
+	}
+}
+
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+	static int fan_state;
+	u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+	if (fan_state != fan) {
+		fan_state = fan;
+		if (fan)
+			printk(KERN_WARNING "Fan rotation error detected."
+				   " Please check hardware.\n");
+	}
+}
 
-#ifdef CONFIG_SENSORS_AD7414
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	extern int ad7414_get_temp(int index);
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	/* We loop in case either driver was compiled as a module and
+	 * has not been insmoded yet.
+	 */
+	while (!(adap = i2c_get_adapter(0))) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+	while (1) {
+		list_for_each_entry(client, &adap->clients, list)
+			if (client->addr == 0x4a)
+				goto found_it;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+found_it:
+	i2c_put_adapter(adap);
+
+	pika_setup_critical_temp(client);
+
+	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		int temp = ad7414_get_temp(0);
+		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+		out_be32(fpga + 0x20, temp);
 
-		out_be32(fpga, temp);
+		pika_dtm_check_fan(fpga);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ);
@@ -115,37 +301,44 @@ static int pika_dtm_thread(void __iomem *fpga)
 	return 0;
 }
 
+
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
 	struct device_node *np;
-	struct resource res;
-	void __iomem *fpga;
 
 	np = of_find_compatible_node(NULL, NULL, "pika,fpga");
 	if (np == NULL)
 		return -ENOENT;
 
-	/* We do not call of_iomap here since it would map in the entire
-	 * fpga space, which is over 8k.
-	 */
-	if (of_address_to_resource(np, 0, &res)) {
-		of_node_put(np);
-		return -ENOENT;
-	}
+	dtm_fpga = of_iomap(np, 0);
 	of_node_put(np);
-
-	fpga = ioremap(res.start, 0x24);
-	if (fpga == NULL)
+	if (dtm_fpga == NULL)
 		return -ENOENT;
 
-	dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+	dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
 	if (IS_ERR(dtm_thread)) {
-		iounmap(fpga);
+		iounmap(dtm_fpga);
 		return PTR_ERR(dtm_thread);
 	}
 
 	return 0;
 }
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
 #endif
+
+EXPORT_SYMBOL(pika_dtm_register_shutdown);
+EXPORT_SYMBOL(pika_dtm_unregister_shutdown);
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4c0da0c079e9..c62f893ede19 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,18 +2,29 @@ config PPC_MPC512x
 	bool
 	select FSL_SOC
 	select IPIC
-	default n
+	select PPC_CLOCK
 
 config PPC_MPC5121
 	bool
 	select PPC_MPC512x
-	default n
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MULTIPLATFORM && PPC32
 	select DEFAULT_UIMAGE
 	select PPC_MPC5121
+	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
-	default n
+
+config MPC5121_GENERIC
+	bool "Generic support for simple MPC5121 based boards"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select DEFAULT_UIMAGE
+	select PPC_MPC5121
+	help
+	  This option enables support for simple MPC5121 based boards
+	  which do not need custom platform specific setup.
+
+	  Compatible boards include:  Protonic LVT base boards (ZANMCU
+	  and VICVT2).
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 232c89f2039a..90be2f5717e6 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,4 +1,6 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
-obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
+obj-y				+= clock.o mpc512x_shared.o
+obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
+obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
new file mode 100644
index 000000000000..f416014ee727
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Implements the clk api defined in include/linux/clk.h
+ *
+ *    Original based on linux/arch/arm/mach-integrator/clock.c
+ *
+ *    Copyright (C) 2004 ARM Limited.
+ *    Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <asm/mpc512x.h>
+#include <asm/clk_interface.h>
+
+#undef CLK_DEBUG
+
+static int clocks_initialized;
+
+#define CLK_HAS_RATE	0x1	/* has rate in MHz */
+#define CLK_HAS_CTRL	0x2	/* has control reg and bit */
+
+struct clk {
+	struct list_head node;
+	char name[32];
+	int flags;
+	struct device *dev;
+	unsigned long rate;
+	struct module *owner;
+	void (*calc) (struct clk *);
+	struct clk *parent;
+	int reg, bit;		/* CLK_HAS_CTRL */
+	int div_shift;		/* only used by generic_div_clk_calc */
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int dev_match = 0;
+	int id_match = 0;
+
+	if (dev == NULL && id == NULL)
+		return NULL;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (dev && dev == p->dev)
+			dev_match++;
+		if (strcmp(id, p->name) == 0)
+			id_match++;
+		if ((dev_match || id_match) && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+
+#ifdef CLK_DEBUG
+static void dump_clocks(void)
+{
+	struct clk *p;
+
+	mutex_lock(&clocks_mutex);
+	printk(KERN_INFO "CLOCKS:\n");
+	list_for_each_entry(p, &clocks, node) {
+		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		if (p->parent)
+			printk(KERN_INFO " %s %ld", p->parent->name,
+			       p->parent->rate);
+		if (p->flags & CLK_HAS_CTRL)
+			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
+		printk("\n");
+	}
+	mutex_unlock(&clocks_mutex);
+}
+#define	DEBUG_CLK_DUMP() dump_clocks()
+#else
+#define	DEBUG_CLK_DUMP()
+#endif
+
+
+static void mpc5121_clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+#define NRPSC 12
+
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[NRPSC];	/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+};
+
+struct mpc512x_clockctl __iomem *clockctl;
+
+static int mpc5121_clk_enable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask |= 1 << clk->bit;
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+	return 0;
+}
+
+static void mpc5121_clk_disable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask &= ~(1 << clk->bit);
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+}
+
+static unsigned long mpc5121_clk_get_rate(struct clk *clk)
+{
+	if (clk->flags & CLK_HAS_RATE)
+		return clk->rate;
+	else
+		return 0;
+}
+
+static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+static unsigned long spmf_mult(void)
+{
+	/*
+	 * Convert spmf to multiplier
+	 */
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16,
+		20, 24, 28, 32,
+		36, 40, 44, 48,
+		52, 56, 60, 64
+	};
+	int spmf = (clockctl->spmr >> 24) & 0xf;
+	return spmf_to_mult[spmf];
+}
+
+static unsigned long sysdiv_div_x_2(void)
+{
+	/*
+	 * Convert sysdiv to divisor x 2
+	 * Some divisors have fractional parts so
+	 * multiply by 2 then divide by this value
+	 */
+	static int sysdiv_to_div_x_2[] = {
+		4, 5, 6, 7,
+		8, 9, 10, 14,
+		12, 16, 18, 22,
+		20, 24, 26, 30,
+		28, 32, 34, 38,
+		36, 40, 42, 46,
+		44, 48, 50, 54,
+		52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	return sysdiv_to_div_x_2[sysdiv];
+}
+
+static unsigned long ref_to_sys(unsigned long rate)
+{
+	rate *= spmf_mult();
+	rate *= 2;
+	rate /= sysdiv_div_x_2();
+
+	return rate;
+}
+
+static unsigned long sys_to_ref(unsigned long rate)
+{
+	rate *= sysdiv_div_x_2();
+	rate /= 2;
+	rate /= spmf_mult();
+
+	return rate;
+}
+
+static long ips_to_ref(unsigned long rate)
+{
+	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+
+	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
+	rate *= 2;		/* sys_clk = csb_clk * 2 */
+	return sys_to_ref(rate);
+}
+
+static unsigned long devtree_getfreq(char *clockname)
+{
+	struct device_node *np;
+	const unsigned int *prop;
+	unsigned int val = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+	if (np) {
+		prop = of_get_property(np, clockname, NULL);
+		if (prop)
+			val = *prop;
+	    of_node_put(np);
+	}
+	return val;
+}
+
+static void ref_clk_calc(struct clk *clk)
+{
+	unsigned long rate;
+
+	rate = devtree_getfreq("bus-frequency");
+	if (rate == 0) {
+		printk(KERN_ERR "No bus-frequency in dev tree\n");
+		clk->rate = 0;
+		return;
+	}
+	clk->rate = ips_to_ref(rate);
+}
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.calc = ref_clk_calc,
+};
+
+
+static void sys_clk_calc(struct clk *clk)
+{
+	clk->rate = ref_to_sys(ref_clk.rate);
+}
+
+static struct clk sys_clk = {
+	.name = "sys_clk",
+	.calc = sys_clk_calc,
+};
+
+static void diu_clk_calc(struct clk *clk)
+{
+	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	unsigned long rate;
+
+	rate = sys_clk.rate;
+
+	rate *= 2;
+	rate /= diudiv_x_2;
+
+	clk->rate = rate;
+}
+
+static void half_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / 2;
+}
+
+static void generic_div_clk_calc(struct clk *clk)
+{
+	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+
+	clk->rate = clk->parent->rate / div;
+}
+
+static void unity_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk csb_clk = {
+	.name = "csb_clk",
+	.calc = half_clk_calc,
+	.parent = &sys_clk,
+};
+
+static void e300_clk_calc(struct clk *clk)
+{
+	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int ratex2 = clk->parent->rate * spmf;
+
+	clk->rate = ratex2 / 2;
+}
+
+static struct clk e300_clk = {
+	.name = "e300_clk",
+	.calc = e300_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk ips_clk = {
+	.name = "ips_clk",
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 23,
+};
+
+/*
+ * Clocks controlled by SCCR1 (.reg = 0)
+ */
+static struct clk lpc_clk = {
+	.name = "lpc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 30,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 11,
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 29,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 8,
+};
+
+static struct clk pata_clk = {
+	.name = "pata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+/*
+ * PSC clocks (bits 27 - 16)
+ * are setup elsewhere
+ */
+
+static struct clk sata_clk = {
+	.name = "sata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 14,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk fec_clk = {
+	.name = "fec_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 13,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk pci_clk = {
+	.name = "pci_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 11,
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 20,
+};
+
+/*
+ * Clocks controlled by SCCR2 (.reg = 1)
+ */
+static struct clk diu_clk = {
+	.name = "diu_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 31,
+	.calc = diu_clk_calc,
+};
+
+static struct clk axe_clk = {
+	.name = "axe_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 30,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb1_clk = {
+	.name = "usb1_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb2_clk = {
+	.name = "usb2_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 27,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 26,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mscan_clk = {
+	.name = "mscan_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 25,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk sdhc_clk = {
+	.name = "sdhc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 24,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mbx_bus_clk = {
+	.name = "mbx_bus_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 22,
+	.calc = half_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_clk = {
+	.name = "mbx_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 21,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_3d_clk = {
+	.name = "mbx_3d_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 20,
+	.calc = generic_div_clk_calc,
+	.parent = &mbx_bus_clk,
+	.div_shift = 14,
+};
+
+static void psc_mclk_in_calc(struct clk *clk)
+{
+	clk->rate = devtree_getfreq("psc_mclk_in");
+	if (!clk->rate)
+		clk->rate = 25000000;
+}
+
+static struct clk psc_mclk_in = {
+	.name = "psc_mclk_in",
+	.calc = psc_mclk_in_calc,
+};
+
+static struct clk spdif_txclk = {
+	.name = "spdif_txclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static struct clk spdif_rxclk = {
+	.name = "spdif_rxclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static void ac97_clk_calc(struct clk *clk)
+{
+	/* ac97 bit clock is always 24.567 MHz */
+	clk->rate = 24567000;
+}
+
+static struct clk ac97_clk = {
+	.name = "ac97_clk_in",
+	.calc = ac97_clk_calc,
+};
+
+struct clk *rate_clks[] = {
+	&ref_clk,
+	&sys_clk,
+	&diu_clk,
+	&csb_clk,
+	&e300_clk,
+	&ips_clk,
+	&fec_clk,
+	&sata_clk,
+	&pata_clk,
+	&nfc_clk,
+	&lpc_clk,
+	&mbx_bus_clk,
+	&mbx_clk,
+	&mbx_3d_clk,
+	&axe_clk,
+	&usb1_clk,
+	&usb2_clk,
+	&i2c_clk,
+	&mscan_clk,
+	&sdhc_clk,
+	&pci_clk,
+	&psc_mclk_in,
+	&spdif_txclk,
+	&spdif_rxclk,
+	&ac97_clk,
+	NULL
+};
+
+static void rate_clk_init(struct clk *clk)
+{
+	if (clk->calc) {
+		clk->calc(clk);
+		clk->flags |= CLK_HAS_RATE;
+		clk_register(clk);
+	} else {
+		printk(KERN_WARNING
+		       "Could not initialize clk %s without a calc routine\n",
+		       clk->name);
+	}
+}
+
+static void rate_clks_init(void)
+{
+	struct clk **cpp, *clk;
+
+	cpp = rate_clks;
+	while ((clk = *cpp++))
+		rate_clk_init(clk);
+}
+
+/*
+ * There are two clk enable registers with 32 enable bits each
+ * psc clocks and device clocks are all stored in dev_clks
+ */
+struct clk dev_clks[2][32];
+
+/*
+ * Given a psc number return the dev_clk
+ * associated with it
+ */
+static struct clk *psc_dev_clk(int pscnum)
+{
+	int reg, bit;
+	struct clk *clk;
+
+	reg = 0;
+	bit = 27 - pscnum;
+
+	clk = &dev_clks[reg][bit];
+	clk->reg = 0;
+	clk->bit = bit;
+	return clk;
+}
+
+/*
+ * PSC clock rate calculation
+ */
+static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
+{
+	unsigned long mclk_src = sys_clk.rate;
+	unsigned long mclk_div;
+
+	/*
+	 * Can only change value of mclk divider
+	 * when the divider is disabled.
+	 *
+	 * Zero is not a valid divider so minimum
+	 * divider is 1
+	 *
+	 * disable/set divider/enable
+	 */
+	out_be32(&clockctl->pccr[pscnum], 0);
+	out_be32(&clockctl->pccr[pscnum], 0x00020000);
+	out_be32(&clockctl->pccr[pscnum], 0x00030000);
+
+	if (clockctl->pccr[pscnum] & 0x80) {
+		clk->rate = spdif_rxclk.rate;
+		return;
+	}
+
+	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	case 0:
+		mclk_src = sys_clk.rate;
+		break;
+	case 1:
+		mclk_src = ref_clk.rate;
+		break;
+	case 2:
+		mclk_src = psc_mclk_in.rate;
+		break;
+	case 3:
+		mclk_src = spdif_txclk.rate;
+		break;
+	}
+
+	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	clk->rate = mclk_src / mclk_div;
+}
+
+/*
+ * Find all psc nodes in device tree and assign a clock
+ * with name "psc%d_mclk" and dev pointing at the device
+ * returned from of_find_device_by_node
+ */
+static void psc_clks_init(void)
+{
+	struct device_node *np;
+	const u32 *cell_index;
+	struct of_device *ofdev;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		cell_index = of_get_property(np, "cell-index", NULL);
+		if (cell_index) {
+			int pscnum = *cell_index;
+			struct clk *clk = psc_dev_clk(pscnum);
+
+			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
+			ofdev = of_find_device_by_node(np);
+			clk->dev = &ofdev->dev;
+			/*
+			 * AC97 is special rate clock does
+			 * not go through normal path
+			 */
+			if (strcmp("ac97", np->name) == 0)
+				clk->rate = ac97_clk.rate;
+			else
+				psc_calc_rate(clk, pscnum, np);
+			sprintf(clk->name, "psc%d_mclk", pscnum);
+			clk_register(clk);
+			clk_enable(clk);
+		}
+	}
+}
+
+static struct clk_interface mpc5121_clk_functions = {
+	.clk_get		= mpc5121_clk_get,
+	.clk_enable		= mpc5121_clk_enable,
+	.clk_disable		= mpc5121_clk_disable,
+	.clk_get_rate		= mpc5121_clk_get_rate,
+	.clk_put		= mpc5121_clk_put,
+	.clk_round_rate		= mpc5121_clk_round_rate,
+	.clk_set_rate		= mpc5121_clk_set_rate,
+	.clk_set_parent		= NULL,
+	.clk_get_parent		= NULL,
+};
+
+static int
+mpc5121_clk_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (np) {
+		clockctl = of_iomap(np, 0);
+		of_node_put(np);
+	}
+
+	if (!clockctl) {
+		printk(KERN_ERR "Could not map clock control registers\n");
+		return 0;
+	}
+
+	rate_clks_init();
+	psc_clks_init();
+
+	/* leave clockctl mapped forever */
+	/*iounmap(clockctl); */
+	DEBUG_CLK_DUMP();
+	clocks_initialized++;
+	clk_functions = mpc5121_clk_functions;
+	return 0;
+}
+
+
+arch_initcall(mpc5121_clk_init);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 50bd3a319022..5ebf6939a697 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
  *
@@ -15,7 +15,6 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
@@ -23,65 +22,22 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
-/**
- * 	mpc512x_find_ips_freq - Find the IPS bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .name = "localbus", },
-	{},
-};
+#include "mpc512x.h"
+#include "mpc5121_ads.h"
 
-static void __init mpc5121_ads_declare_of_platform_devices(void)
+static void __init mpc5121_ads_setup_arch(void)
 {
-	/* Find every child of the SOC node and add it to of_platform */
-	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
-		printk(KERN_ERR __FILE__ ": "
-			"Error while probing of_platform bus\n");
+	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+	/*
+	 * cpld regs are needed early
+	 */
+	mpc5121_ads_cpld_map();
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
 {
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-	of_node_put(np);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
+	mpc512x_init_IRQ();
+	mpc5121_ads_cpld_pic_init();
 }
 
 /*
@@ -97,7 +53,8 @@ static int __init mpc5121_ads_probe(void)
 define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
-	.init			= mpc5121_ads_declare_of_platform_devices,
+	.setup_arch		= mpc5121_ads_setup_arch,
+	.init			= mpc512x_declare_of_platform_devices,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 000000000000..662076cfee2f
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for ADS5121 specific code
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif				/* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 000000000000..a6ce80566625
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_host *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+	u8 pci_mask;
+	u8 pci_status;
+	u8 route;
+	u8 misc_mask;
+	u8 misc_status;
+	u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+	return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+	return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+	.typename = " CPLD PIC ",
+	.mask = cpld_mask_irq,
+	.ack = cpld_mask_irq,
+	.unmask = cpld_unmask_irq,
+};
+
+static int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+			    u8 __iomem *maskp)
+{
+	int cpld_irq;
+	u8 status = in_8(statusp);
+	u8 mask = in_8(maskp);
+
+	/* ignore don't cares and masked irqs */
+	status |= (ignore | mask);
+
+	if (status == 0xff)
+		return NO_IRQ_IGNORE;
+
+	cpld_irq = ffz(status) + offset;
+
+	return irq_linear_revmap(cpld_pic_host, cpld_irq);
+}
+
+static void
+cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+		&cpld_regs->pci_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+
+	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+		&cpld_regs->misc_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+}
+
+static int
+cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+			     irq_hw_number_t hw)
+{
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+	return 0;
+}
+
+static struct
+irq_host_ops cpld_pic_host_ops = {
+	.match = cpld_pic_host_match,
+	.map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+	struct device_node *np = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	cpld_regs = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+	unsigned int cascade_irq;
+	struct device_node *np = NULL;
+
+	pr_debug("cpld_ic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	if (!cpld_regs)
+		goto end;
+
+	cascade_irq = irq_of_parse_and_map(np, 0);
+	if (cascade_irq == NO_IRQ)
+		goto end;
+
+	/*
+	 * statically route touch screen pendown through 1
+	 * and ignore it here
+	 * route all others through our cascade irq
+	 */
+	out_8(&cpld_regs->route, 0xfd);
+	out_8(&cpld_regs->pci_mask, 0xff);
+	/* unmask pci ints in misc mask */
+	out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+	cpld_pic_node = of_node_get(np);
+
+	cpld_pic_host =
+	    irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+	if (!cpld_pic_host) {
+		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+		goto end;
+	}
+
+	set_irq_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+	of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
new file mode 100644
index 000000000000..2479de9e2d12
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121 SoC setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+/*
+ * list of supported boards
+ */
+static char *board[] __initdata = {
+	"prt,prtlvt",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_generic_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+	int i = 0;
+
+	while (board[i]) {
+		if (of_flat_dt_is_compatible(node, board[i]))
+			break;
+		i++;
+	}
+
+	return board[i] != NULL;
+}
+
+define_machine(mpc5121_generic) {
+	.name			= "MPC5121 generic",
+	.probe			= mpc5121_generic_probe,
+	.init			= mpc512x_declare_of_platform_devices,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 000000000000..9c03693cb009
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for MPC512x shared code
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern void __init mpc512x_init_IRQ(void);
+void __init mpc512x_declare_of_platform_devices(void);
+#endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 000000000000..d8cd579f3191
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+	struct device_node *np;
+	const unsigned int *p_ips_freq = NULL;
+
+	of_node_get(node);
+	while (node) {
+		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+		if (p_ips_freq)
+			break;
+
+		np = of_get_parent(node);
+		of_node_put(node);
+		node = np;
+	}
+	if (node)
+		of_node_put(node);
+
+	return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+void __init mpc512x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+	of_node_put(np);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Nodes to do bus probe on, soc and localbus
+ */
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .compatible = "fsl,mpc5121-immr", },
+	{ .compatible = "fsl,mpc5121-localbus", },
+	{},
+};
+
+void __init mpc512x_declare_of_platform_devices(void)
+{
+	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+		printk(KERN_ERR __FILE__ ": "
+			"Error while probing of_platform bus\n");
+}
+
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index e3428ddd9040..5a382bb15f62 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -63,6 +63,7 @@
 
 #define MPC52xx_PCI_TCR_P		0x01000000
 #define MPC52xx_PCI_TCR_LD		0x00010000
+#define MPC52xx_PCI_TCR_WCT8		0x00000008
 
 #define MPC52xx_PCI_TBATR_DISABLE	0x0
 #define MPC52xx_PCI_TBATR_ENABLE	0x1
@@ -313,7 +314,7 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	out_be32(&pci_regs->tbatr1,
 		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
 
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
 
 	tmp = in_be32(&pci_regs->gscr);
 #if 0
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 917ac8891555..1c8034bfa796 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,7 +1,8 @@
-choice
-	prompt "82xx Board Type"
-	depends on PPC_82xx
-	default MPC8272_ADS
+menuconfig PPC_82xx
+	bool "82xx-based boards (PQ II)"
+	depends on 6xx && PPC_MULTIPLATFORM
+
+if PPC_82xx
 
 config MPC8272_ADS
 	bool "Freescale MPC8272 ADS"
@@ -36,7 +37,7 @@ config EP8248E
 	  This board is also resold by Freescale as the QUICCStart
 	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
 
-endchoice
+endif
 
 config PQ2ADS
 	bool
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index d5770fdf7f09..373e993a5ed5 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -59,6 +59,7 @@ static void __init ep8248e_pic_init(void)
 	of_node_put(np);
 }
 
+#ifdef CONFIG_FS_ENET_MDIO_FCC
 static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
 {
 	if (level)
@@ -164,6 +165,7 @@ static struct of_platform_driver ep8248e_mdio_driver = {
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
+#endif
 
 struct cpm_pin {
 	int port, pin, flags;
@@ -296,7 +298,9 @@ static  __initdata struct of_device_id of_bus_ids[] = {
 static int __init declare_of_platform_devices(void)
 {
 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+#ifdef CONFIG_FS_ENET_MDIO_FCC
 	of_register_platform_driver(&ep8248e_mdio_driver);
+#endif
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 7d3018751988..8054c685d323 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[] = {
 	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index a8013816125c..9876d7e072f4 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -109,7 +109,7 @@ static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
 {
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip(virq, &pq2ads_pci_ic);
+	set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 13587e2e8680..27d9bf86de01 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,10 +1,12 @@
-menuconfig MPC83xx
-	bool "83xx Board Type"
-	depends on PPC_83xx
+menuconfig PPC_83xx
+	bool "83xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
+	select FSL_SOC
+	select IPIC
 
-if MPC83xx
+if PPC_83xx
 
 config MPC831x_RDB
 	bool "Freescale MPC831x RDB"
@@ -58,6 +60,17 @@ config MPC836x_MDS
 	help
 	  This option enables support for the MPC836x MDS Processor Board.
 
+config MPC836x_RDK
+	bool "Freescale/Logic MPC836x RDK"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	select QE_GPIO
+	select FSL_GTM
+	select FSL_LBC
+	help
+	  This option enables support for the MPC836x RDK Processor Board,
+	  also known as ZOOM PowerQUICC Kit.
+
 config MPC837x_MDS
 	bool "Freescale MPC837x MDS"
 	select DEFAULT_UIMAGE
@@ -79,6 +92,15 @@ config SBC834x
 	help
 	  This option enables support for the Wind River SBC834x board.
 
+config ASP834x
+	bool "Analogue & Micro ASP 834x"
+	select PPC_MPC834x
+	select REDBOOT
+	help
+	  This enables support for the Analogue & Micro ASP 83xx
+	  board.
+
+
 endif
 
 # used for usb
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 7e6dd3e259d8..f331fd7dd836 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -8,7 +8,9 @@ obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)	+= mpc836x_mds.o
+obj-$(CONFIG_MPC836x_RDK)	+= mpc836x_rdk.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
 obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
+obj-$(CONFIG_ASP834x)		+= asp834x.o
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
new file mode 100644
index 000000000000..bb30d67ad0a2
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -0,0 +1,90 @@
+/*
+ * arch/powerpc/platforms/83xx/asp834x.c
+ *
+ * Analogue & Micro ASP8347 board specific routines
+ * clone of mpc834x_itx
+ *
+ * Copyright 2008 Codehermit
+ *
+ * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init asp834x_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("asp834x_setup_arch()", 0);
+
+	mpc834x_usb_cfg();
+}
+
+static void __init asp834x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	of_node_put(np);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+static struct __initdata of_device_id asp8347_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init asp8347_declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, asp8347_ids, NULL);
+	return 0;
+}
+machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init asp834x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "analogue-and-micro,asp8347e");
+}
+
+define_machine(asp834x) {
+	.name			= "ASP8347E",
+	.probe			= asp834x_probe,
+	.setup_arch		= asp834x_setup_arch,
+	.init_IRQ		= asp834x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
new file mode 100644
index 000000000000..c10dec4bf178
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -0,0 +1,102 @@
+/*
+ * MPC8360E-RDK board file.
+ *
+ * Copyright (c) 2006  Freescale Semicondutor, Inc.
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+static struct of_device_id __initdata mpc836x_rdk_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init mpc836x_rdk_declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
+}
+machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+
+static void __init mpc836x_rdk_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+	qe_reset();
+}
+
+static void __init mpc836x_rdk_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np)
+		return;
+
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened.
+ */
+static int __init mpc836x_rdk_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8360rdk");
+}
+
+define_machine(mpc836x_rdk) {
+	.name		= "MPC836x RDK",
+	.probe		= mpc836x_rdk_probe,
+	.setup_arch	= mpc836x_rdk_setup_arch,
+	.init_IRQ	= mpc836x_rdk_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index ecbe580c3f32..cebea5cadbc1 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -38,6 +38,12 @@ config MPC85xx_MDS
 	help
 	  This option enables support for the MPC85xx MDS board
 
+config MPC8536_DS
+	bool "Freescale MPC8536 DS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8536 DS board
+
 config MPC85xx_DS
 	bool "Freescale MPC85xx DS"
 	select PPC_I8259
@@ -75,6 +81,14 @@ config TQM8541
 	select TQM85xx
 	select CPM2
 
+config TQM8548
+	bool "TQ Components TQM8548"
+	help
+	  This option enables support for the TQ Components TQM8548 board.
+	select DEFAULT_UIMAGE
+	select PPC_CPM_NEW_BINDING
+	select TQM85xx
+
 config TQM8555
 	bool "TQ Components TQM8555"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 6cea185f62b2..cb3054e1001d 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
new file mode 100644
index 000000000000..6b846aa1ced9
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -0,0 +1,125 @@
+/*
+ * MPC8536 DS Board Setup
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init mpc8536_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc8536_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0x8000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+		}
+	}
+
+#endif
+
+	printk("MPC8536 DS board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc8536_ds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{},
+};
+
+static int __init mpc8536_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
+}
+machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8536_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8536ds");
+}
+
+define_machine(mpc8536_ds) {
+	.name			= "MPC8536 DS",
+	.probe			= mpc8536_ds_probe,
+	.setup_arch		= mpc8536_ds_setup_arch,
+	.init_IRQ		= mpc8536_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3582c841844b..ba498d6f2d02 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -119,6 +119,8 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 
 	/* SCC2 */
+	{2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -145,7 +147,6 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -156,8 +157,9 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
+	{2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 8b1de7884be6..50d7ea8f922b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -335,6 +336,19 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, of_bus_ids, NULL);
+}
+machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
 	.probe		= mpc85xx_cds_probe,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index dfd8b4ad9b28..25f41cd2d33a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -58,14 +58,13 @@ void __init mpc85xx_ds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
-	struct device_node *np = NULL;
+	struct device_node *np;
 #ifdef CONFIG_PPC_I8259
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
-	np = of_find_node_by_type(np, "open-pic");
-
+	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL) {
 		printk(KERN_ERR "Could not find open-pic node\n");
 		return;
@@ -78,9 +77,11 @@ void __init mpc85xx_ds_pic_init(void)
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
+	of_node_put(np);
 
 	mpic_init(mpic);
 
@@ -184,7 +185,7 @@ static int __init mpc8544_ds_probe(void)
 	}
 }
 
-static struct of_device_id mpc85xxds_ids[] = {
+static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{},
@@ -195,6 +196,7 @@ static int __init mpc85xxds_publish_devices(void)
 	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 77681acf1bae..d850880d6964 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -120,8 +120,18 @@ static void __init tqm85xx_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			if (!of_address_to_resource(np, 0, &rsrc)) {
+				if ((rsrc.start & 0xfffff) == 0x8000)
+					fsl_add_bridge(np, 1);
+				else
+					fsl_add_bridge(np, 0);
+			}
+		}
+	}
 #endif
 }
 
@@ -165,10 +175,11 @@ static int __init tqm85xx_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if ((of_flat_dt_is_compatible(root, "tqm,8540")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8541")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8555")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8560")))
+	if ((of_flat_dt_is_compatible(root, "tqc,tqm8540")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8541")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8548")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8555")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8560")))
 		return 1;
 
 	return 0;
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a1dcae..80a81e02bb55 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,13 @@
-choice
-	prompt "86xx Board Type"
-	depends on PPC_86xx
-	default MPC8641_HPCN
+config PPC_86xx
+menuconfig PPC_86xx
+	bool "86xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
+	select FSL_SOC
+	select ALTIVEC
+	help
+	  The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
 
 config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
@@ -24,7 +30,7 @@ config MPC8610_HPCD
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
-endchoice
+endif
 
 config MPC8641
 	bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 1b9b4a9b2525..8fee37dec795 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 86xx linux kernel.
 #
 
+obj-y				:= pic.o
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index dea13208bf64..30725302884a 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -39,6 +39,8 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 
+#include "mpc86xx.h"
+
 static unsigned char *pixis_bdcfg0, *pixis_arch;
 
 static struct of_device_id __initdata mpc8610_ids[] = {
@@ -56,27 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-static void __init mpc86xx_hpcd_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
 #ifdef CONFIG_PCI
 static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
@@ -404,7 +385,7 @@ define_machine(mpc86xx_hpcd) {
 	.name			= "MPC86xx HPCD",
 	.probe			= mpc86xx_hpcd_probe,
 	.setup_arch		= mpc86xx_hpcd_setup_arch,
-	.init_IRQ		= mpc86xx_hpcd_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.time_init		= mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 525ffa1904f9..08efb57559d1 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -15,6 +15,7 @@
  * mpc86xx_* files. Mostly for use by mpc86xx_setup().
  */
 
-extern void __init mpc86xx_smp_init(void);
+extern void mpc86xx_smp_init(void);
+extern void mpc86xx_init_irq(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f13704aabbea..7916599c9126 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -28,7 +28,6 @@
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
-#include <asm/i8259.h>
 
 #include <asm/mpic.h>
 
@@ -46,67 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int cascade_irq = i8259_irq();
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-	desc->chip->eoi(irq);
-}
-#endif	/* CONFIG_PCI */
-
-static void __init
-mpc86xx_hpcn_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-#ifdef CONFIG_PCI
-	struct device_node *cascade_node = NULL;
-	int cascade_irq;
-#endif
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-
-#ifdef CONFIG_PCI
-	/* Initialize i8259 controller */
-	for_each_node_by_type(np, "interrupt-controller")
-		if (of_device_is_compatible(np, "chrp,iic")) {
-			cascade_node = np;
-			break;
-		}
-	if (cascade_node == NULL) {
-		printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
-		return;
-	}
-
-	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
-		printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
-		return;
-	}
-	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
-
-	i8259_init(cascade_node, 0);
-	of_node_put(cascade_node);
-
-	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
-#endif
-}
-
-#ifdef CONFIG_PCI
 extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
@@ -237,7 +175,7 @@ define_machine(mpc86xx_hpcn) {
 	.name			= "MPC86xx HPCN",
 	.probe			= mpc86xx_hpcn_probe,
 	.setup_arch		= mpc86xx_hpcn_setup_arch,
-	.init_IRQ		= mpc86xx_hpcn_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index ba55b0ff0f74..835f2dc24dc9 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
+#include <asm/code-patching.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
@@ -56,8 +57,7 @@ smp_86xx_kick_cpu(int nr)
 	unsigned int save_vector;
 	unsigned long target, flags;
 	int n = 0;
-	volatile unsigned int *vector
-		 = (volatile unsigned int *)(KERNELBASE + 0x100);
+	unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
 
 	if (nr < 0 || nr >= NR_CPUS)
 		return;
@@ -71,7 +71,7 @@ smp_86xx_kick_cpu(int nr)
 
 	/* Setup fake reset vector to call __secondary_start_mpc86xx. */
 	target = (unsigned long) __secondary_start_mpc86xx;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Kick that CPU */
 	smp_86xx_release_core(nr);
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
new file mode 100644
index 000000000000..8881c5de500d
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#ifdef CONFIG_PPC_I8259
+static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+	desc->chip->eoi(irq);
+}
+#endif	/* CONFIG_PPC_I8259 */
+
+void __init mpc86xx_init_irq(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct resource res;
+#ifdef CONFIG_PPC_I8259
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	mpic = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET |
+			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " MPIC     ");
+	of_node_put(np);
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 510a06ef0b55..00e6fad3b3ca 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -38,29 +38,6 @@
 #include "mpc86xx.h"
 
 static void __init
-sbc8641_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	of_node_put(np);
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
-static void __init
 sbc8641_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -151,7 +128,7 @@ define_machine(sbc8641) {
 	.name			= "SBC8641D",
 	.probe			= sbc8641_probe,
 	.setup_arch		= sbc8641_setup_arch,
-	.init_IRQ		= sbc8641_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= sbc8641_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index c028a5b71bbb..caaec29796b7 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] = {
 	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 6e7ded0233f6..45ed6cdc1310 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] = {
 	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
 	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
 #endif
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c526973..690c1f46e698 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,36 +1,9 @@
 menu "Platform support"
 
-choice
-	prompt "Machine type"
-	depends on PPC64 || 6xx
-	default PPC_MULTIPLATFORM
-
 config PPC_MULTIPLATFORM
-	bool "Generic desktop/server/laptop"
-	help
-	  Select this option if configuring for an IBM pSeries or
-	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
-	  Maple or Cell-based machine.
-
-config PPC_82xx
-	bool "Freescale 82xx"
-	depends on 6xx
-
-config PPC_83xx
-	bool "Freescale 83xx"
-	depends on 6xx
-	select FSL_SOC
-	select MPC83xx
-	select IPIC
-
-config PPC_86xx
-	bool "Freescale 86xx"
-	depends on 6xx
-	select FSL_SOC
-	select ALTIVEC
-	help
-	  The Freescale E600 SoCs have 74xx cores.
-endchoice
+	bool
+	depends on PPC64 || 6xx
+	default y
 
 config CLASSIC32
 	def_bool y
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f7efaa925a13..5bc4b611ff88 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -95,6 +95,11 @@ config E500
 	select FSL_EMB_PERFMON
 	bool
 
+config PPC_E500MC
+	bool "e500mc Support"
+	select PPC_FPU
+	depends on E500
+
 config PPC_FPU
 	bool
 	default y if PPC64
@@ -155,9 +160,25 @@ config ALTIVEC
 
 	  If in doubt, say Y here.
 
+config VSX
+	bool "VSX Support"
+	depends on POWER4 && ALTIVEC && PPC_FPU
+	---help---
+
+	  This option enables kernel support for the Vector Scaler extensions
+	  to the PowerPC processor. The kernel currently supports saving and
+	  restoring VSX registers, and turning on the 'VSX enable' bit so user
+	  processes can execute VSX instructions.
+
+	  This option is only useful if you have a processor that supports
+	  VSX (P7 and above), but does not have any affect on a non-VSX
+	  CPUs (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
 config SPE
 	bool "SPE Support"
-	depends on E200 || E500
+	depends on E200 || (E500 && !PPC_E500MC)
 	default y
 	---help---
 	  This option enables kernel support for the Signal Processing
@@ -182,7 +203,7 @@ config PPC_STD_MMU_32
 
 config PPC_MM_SLICES
 	bool
-	default y if HUGETLB_PAGE
+	default y if HUGETLB_PAGE || PPC_64K_PAGES
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c39f5c225f2e..896548ba1ca1 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_platform.h>
+#include <linux/debugfs.h>
 
 #include <asm/dcr.h>
 #include <asm/machdep.h>
@@ -69,8 +70,19 @@ struct axon_msic {
 	dma_addr_t fifo_phys;
 	dcr_host_t dcr_host;
 	u32 read_offset;
+#ifdef DEBUG
+	u32 __iomem *trigger;
+#endif
 };
 
+#ifdef DEBUG
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic);
+#else
+static inline void axon_msi_debug_setup(struct device_node *dn,
+					struct axon_msic *msic) { }
+#endif
+
+
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
 	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
@@ -346,7 +358,14 @@ static int axon_msi_probe(struct of_device *device,
 		goto out_free_msic;
 	}
 
-	msic->irq_host = irq_alloc_host(of_node_get(dn), IRQ_HOST_MAP_NOMAP,
+	virq = irq_of_parse_and_map(dn, 0);
+	if (virq == NO_IRQ) {
+		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
+		       dn->full_name);
+		goto out_free_fifo;
+	}
+
+	msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
 					NR_IRQS, &msic_host_ops, 0);
 	if (!msic->irq_host) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_host for %s\n",
@@ -356,13 +375,6 @@ static int axon_msi_probe(struct of_device *device,
 
 	msic->irq_host->host_data = msic;
 
-	virq = irq_of_parse_and_map(dn, 0);
-	if (virq == NO_IRQ) {
-		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
-		       dn->full_name);
-		goto out_free_host;
-	}
-
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
 	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
@@ -381,12 +393,12 @@ static int axon_msi_probe(struct of_device *device,
 	ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
 	ppc_md.msi_check_device = axon_msi_check_device;
 
+	axon_msi_debug_setup(dn, msic);
+
 	printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name);
 
 	return 0;
 
-out_free_host:
-	kfree(msic->irq_host);
 out_free_fifo:
 	dma_free_coherent(&device->dev, MSIC_FIFO_SIZE_BYTES, msic->fifo_virt,
 			  msic->fifo_phys);
@@ -418,3 +430,47 @@ static int __init axon_msi_init(void)
 	return of_register_platform_driver(&axon_msi_driver);
 }
 subsys_initcall(axon_msi_init);
+
+
+#ifdef DEBUG
+static int msic_set(void *data, u64 val)
+{
+	struct axon_msic *msic = data;
+	out_le32(msic->trigger, val);
+	return 0;
+}
+
+static int msic_get(void *data, u64 *val)
+{
+	*val = 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n");
+
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
+{
+	char name[8];
+	u64 addr;
+
+	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
+	if (addr == OF_BAD_ADDR) {
+		pr_debug("axon_msi: couldn't translate reg property\n");
+		return;
+	}
+
+	msic->trigger = ioremap(addr, 0x4);
+	if (!msic->trigger) {
+		pr_debug("axon_msi: ioremap failed\n");
+		return;
+	}
+
+	snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
+
+	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
+				 msic, &fops_msic)) {
+		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		return;
+	}
+}
+#endif /* DEBUG */
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 81467ff055c8..2e67bd840e01 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -112,7 +112,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	spin_lock(&beat_htab_lock);
@@ -334,7 +334,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	/* insert into not-volted entry */
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 45646b2b4af4..eeacb3a52ca1 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -540,7 +540,7 @@ static unsigned long cell_dma_direct_offset;
 static unsigned long dma_iommu_fixed_base;
 struct dma_mapping_ops dma_iommu_fixed_ops;
 
-static void cell_dma_dev_setup_iommu(struct device *dev)
+static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
 	struct iommu_window *window;
 	struct cbe_iommu *iommu;
@@ -555,11 +555,11 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
 		       archdata->of_node ? archdata->of_node->full_name : "?",
 		       archdata->numa_node);
-		return;
+		return NULL;
 	}
 	window = list_entry(iommu->windows.next, struct iommu_window, list);
 
-	archdata->dma_data = &window->table;
+	return &window->table;
 }
 
 static void cell_dma_dev_setup_fixed(struct device *dev);
@@ -572,7 +572,7 @@ static void cell_dma_dev_setup(struct device *dev)
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		cell_dma_dev_setup_iommu(dev);
+		archdata->dma_data = cell_get_iommu_table(dev);
 	else if (get_pci_dma_ops() == &dma_direct_ops)
 		archdata->dma_data = (void *)cell_dma_direct_offset;
 	else
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 655704ad03cf..505f9b9bdf0c 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -17,6 +17,7 @@
 #include <asm/reg.h>
 #include <asm/io.h>
 #include <asm/prom.h>
+#include <asm/kexec.h>
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/cell-regs.h>
@@ -226,6 +227,11 @@ static int cbe_ptcal_notify_reboot(struct notifier_block *nb,
 	return cbe_ptcal_disable();
 }
 
+static void cbe_ptcal_crash_shutdown(void)
+{
+	cbe_ptcal_disable();
+}
+
 static struct notifier_block cbe_ptcal_reboot_notifier = {
 	.notifier_call = cbe_ptcal_notify_reboot
 };
@@ -241,12 +247,20 @@ int __init cbe_ptcal_init(void)
 		return -ENODEV;
 
 	ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier);
-	if (ret) {
-		printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
-		return ret;
-	}
+	if (ret)
+		goto out1;
+
+	ret = crash_shutdown_register(&cbe_ptcal_crash_shutdown);
+	if (ret)
+		goto out2;
 
 	return cbe_ptcal_enable();
+
+out2:
+	unregister_reboot_notifier(&cbe_ptcal_reboot_notifier);
+out1:
+	printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
+	return ret;
 }
 
 arch_initcall(cbe_ptcal_init);
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 3f4b4aef756d..4e5655624ae8 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -300,7 +300,7 @@ static void __init spider_init_one(struct device_node *of_node, int chip,
 		panic("spider_pic: can't map registers !");
 
 	/* Allocate a host */
-	pic->host = irq_alloc_host(of_node_get(of_node), IRQ_HOST_MAP_LINEAR,
+	pic->host = irq_alloc_host(of_node, IRQ_HOST_MAP_LINEAR,
 				   SPIDER_SRC_COUNT, &spider_host_ops,
 				   SPIDER_IRQ_INVALID);
 	if (pic->host == NULL)
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 177735f79317..6653ddbed048 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -130,17 +130,17 @@ void spu_unmap_mappings(struct spu_context *ctx)
 	if (ctx->local_store)
 		unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
 	if (ctx->mfc)
-		unmap_mapping_range(ctx->mfc, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mfc, 0, SPUFS_MFC_MAP_SIZE, 1);
 	if (ctx->cntl)
-		unmap_mapping_range(ctx->cntl, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->cntl, 0, SPUFS_CNTL_MAP_SIZE, 1);
 	if (ctx->signal1)
-		unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal1, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->signal2)
-		unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal2, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->mss)
-		unmap_mapping_range(ctx->mss, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mss, 0, SPUFS_MSS_MAP_SIZE, 1);
 	if (ctx->psmap)
-		unmap_mapping_range(ctx->psmap, 0, 0x20000, 1);
+		unmap_mapping_range(ctx->psmap, 0, SPUFS_PS_MAP_SIZE, 1);
 	mutex_unlock(&ctx->mapping_lock);
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c81341ff75b5..99c73066b82f 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -238,11 +238,13 @@ spufs_mem_write(struct file *file, const char __user *buffer,
 	return size;
 }
 
-static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct spu_context *ctx	= vma->vm_file->private_data;
-	unsigned long pfn, offset, addr0 = address;
+	unsigned long address = (unsigned long)vmf->virtual_address;
+	unsigned long pfn, offset;
+
 #ifdef CONFIG_SPU_FS_64K_LS
 	struct spu_state *csa = &ctx->csa;
 	int psize;
@@ -260,15 +262,15 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 	}
 #endif /* CONFIG_SPU_FS_64K_LS */
 
-	offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
+	offset = vmf->pgoff << PAGE_SHIFT;
 	if (offset >= LS_SIZE)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
-	pr_debug("spufs_mem_mmap_nopfn address=0x%lx -> 0x%lx, offset=0x%lx\n",
-		 addr0, address, offset);
+	pr_debug("spufs_mem_mmap_fault address=0x%lx, offset=0x%lx\n",
+			address, offset);
 
 	if (spu_acquire(ctx))
-		return NOPFN_REFAULT;
+		return VM_FAULT_NOPAGE;
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
@@ -283,12 +285,12 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 
 	spu_release(ctx);
 
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
-	.nopfn = spufs_mem_mmap_nopfn,
+	.fault = spufs_mem_mmap_fault,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
@@ -351,20 +353,19 @@ static const struct file_operations spufs_mem_fops = {
 #endif
 };
 
-static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
-				    unsigned long address,
+static int spufs_ps_fault(struct vm_area_struct *vma,
+				    struct vm_fault *vmf,
 				    unsigned long ps_offs,
 				    unsigned long ps_size)
 {
 	struct spu_context *ctx = vma->vm_file->private_data;
-	unsigned long area, offset = address - vma->vm_start;
+	unsigned long area, offset = vmf->pgoff << PAGE_SHIFT;
 	int ret = 0;
 
-	spu_context_nospu_trace(spufs_ps_nopfn__enter, ctx);
+	spu_context_nospu_trace(spufs_ps_fault__enter, ctx);
 
-	offset += vma->vm_pgoff << PAGE_SHIFT;
 	if (offset >= ps_size)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
 	/*
 	 * Because we release the mmap_sem, the context may be destroyed while
@@ -378,7 +379,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	 * pages to hand out to the user, but we don't want to wait
 	 * with the mmap_sem held.
 	 * It is possible to drop the mmap_sem here, but then we need
-	 * to return NOPFN_REFAULT because the mappings may have
+	 * to return VM_FAULT_NOPAGE because the mappings may have
 	 * hanged.
 	 */
 	if (spu_acquire(ctx))
@@ -386,14 +387,15 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		up_read(&current->mm->mmap_sem);
-		spu_context_nospu_trace(spufs_ps_nopfn__sleep, ctx);
+		spu_context_nospu_trace(spufs_ps_fault__sleep, ctx);
 		ret = spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE);
-		spu_context_trace(spufs_ps_nopfn__wake, ctx, ctx->spu);
+		spu_context_trace(spufs_ps_fault__wake, ctx, ctx->spu);
 		down_read(&current->mm->mmap_sem);
 	} else {
 		area = ctx->spu->problem_phys + ps_offs;
-		vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
-		spu_context_trace(spufs_ps_nopfn__insert, ctx, ctx->spu);
+		vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
+					(area + offset) >> PAGE_SHIFT);
+		spu_context_trace(spufs_ps_fault__insert, ctx, ctx->spu);
 	}
 
 	if (!ret)
@@ -401,18 +403,18 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 refault:
 	put_spu_context(ctx);
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma,
-					   unsigned long address)
+static int spufs_cntl_mmap_fault(struct vm_area_struct *vma,
+					   struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x4000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_cntl_mmap_vmops = {
-	.nopfn = spufs_cntl_mmap_nopfn,
+	.fault = spufs_cntl_mmap_fault,
 };
 
 /*
@@ -1097,23 +1099,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
 	return 4;
 }
 
-static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal1_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x14000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x14000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal1_mmap_vmops = {
-	.nopfn = spufs_signal1_mmap_nopfn,
+	.fault = spufs_signal1_mmap_fault,
 };
 
 static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1234,23 +1236,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal2_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x1c000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal2_mmap_vmops = {
-	.nopfn = spufs_signal2_mmap_nopfn,
+	.fault = spufs_signal2_mmap_fault,
 };
 
 static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1362,14 +1364,14 @@ DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
 		       spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mss_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mss_mmap_vmops = {
-	.nopfn = spufs_mss_mmap_nopfn,
+	.fault = spufs_mss_mmap_fault,
 };
 
 /*
@@ -1424,14 +1426,14 @@ static const struct file_operations spufs_mss_fops = {
 	.mmap	 = spufs_mss_mmap,
 };
 
-static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma,
-					    unsigned long address)
+static int
+spufs_psmap_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x20000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_psmap_mmap_vmops = {
-	.nopfn = spufs_psmap_mmap_nopfn,
+	.fault = spufs_psmap_mmap_fault,
 };
 
 /*
@@ -1484,14 +1486,14 @@ static const struct file_operations spufs_psmap_fops = {
 
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mfc_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x3000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mfc_mmap_vmops = {
-	.nopfn = spufs_mfc_mmap_nopfn,
+	.fault = spufs_mfc_mmap_fault,
 };
 
 /*
@@ -2553,22 +2555,74 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 	wake_up(&ctx->switch_log->wait);
 }
 
-struct tree_descr spufs_dir_contents[] = {
+static int spufs_show_ctx(struct seq_file *s, void *private)
+{
+	struct spu_context *ctx = s->private;
+	u64 mfc_control_RW;
+
+	mutex_lock(&ctx->state_mutex);
+	if (ctx->spu) {
+		struct spu *spu = ctx->spu;
+		struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+		spin_lock_irq(&spu->register_lock);
+		mfc_control_RW = in_be64(&priv2->mfc_control_RW);
+		spin_unlock_irq(&spu->register_lock);
+	} else {
+		struct spu_state *csa = &ctx->csa;
+
+		mfc_control_RW = csa->priv2.mfc_control_RW;
+	}
+
+	seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
+		" %c %lx %lx %lx %lx %x %x\n",
+		ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
+		ctx->flags,
+		ctx->sched_flags,
+		ctx->prio,
+		ctx->time_slice,
+		ctx->spu ? ctx->spu->number : -1,
+		!list_empty(&ctx->rq) ? 'q' : ' ',
+		ctx->csa.class_0_pending,
+		ctx->csa.class_0_dar,
+		ctx->csa.class_1_dsisr,
+		mfc_control_RW,
+		ctx->ops->runcntl_read(ctx),
+		ctx->ops->status_read(ctx));
+
+	mutex_unlock(&ctx->state_mutex);
+
+	return 0;
+}
+
+static int spufs_ctx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, spufs_show_ctx, SPUFS_I(inode)->i_ctx);
+}
+
+static const struct file_operations spufs_ctx_fops = {
+	.open           = spufs_ctx_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+struct spufs_tree_descr spufs_dir_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
-	{ "regs", &spufs_regs_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
+	{ "regs", &spufs_regs_fops,  0666, sizeof(struct spu_reg128[128]), },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_fops, 0666, },
 	{ "signal2", &spufs_signal2_fops, 0666, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
 	{ "signal2_type", &spufs_signal2_type, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
-	{ "fpcr", &spufs_fpcr_fops, 0666, },
+	{ "fpcr", &spufs_fpcr_fops, 0666, sizeof(struct spu_reg128), },
 	{ "lslr", &spufs_lslr_ops, 0444, },
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "mss", &spufs_mss_fops, 0666, },
@@ -2578,29 +2632,31 @@ struct tree_descr spufs_dir_contents[] = {
 	{ "decr_status", &spufs_decr_status_ops, 0666, },
 	{ "event_mask", &spufs_event_mask_ops, 0666, },
 	{ "event_status", &spufs_event_status_ops, 0444, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
-	{ "mbox_info", &spufs_mbox_info_fops, 0444, },
-	{ "ibox_info", &spufs_ibox_info_fops, 0444, },
-	{ "wbox_info", &spufs_wbox_info_fops, 0444, },
-	{ "dma_info", &spufs_dma_info_fops, 0444, },
-	{ "proxydma_info", &spufs_proxydma_info_fops, 0444, },
+	{ "mbox_info", &spufs_mbox_info_fops, 0444, sizeof(u32), },
+	{ "ibox_info", &spufs_ibox_info_fops, 0444, sizeof(u32), },
+	{ "wbox_info", &spufs_wbox_info_fops, 0444, sizeof(u32), },
+	{ "dma_info", &spufs_dma_info_fops, 0444,
+		sizeof(struct spu_dma_info), },
+	{ "proxydma_info", &spufs_proxydma_info_fops, 0444,
+		sizeof(struct spu_proxydma_info)},
 	{ "tid", &spufs_tid_fops, 0444, },
 	{ "stat", &spufs_stat_fops, 0444, },
 	{ "switch_log", &spufs_switch_log_fops, 0444 },
 	{},
 };
 
-struct tree_descr spufs_dir_nosched_contents[] = {
+struct spufs_tree_descr spufs_dir_nosched_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_nosched_fops, 0222, },
 	{ "signal2", &spufs_signal2_nosched_fops, 0222, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
@@ -2609,7 +2665,7 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
 	{ "npc", &spufs_npc_ops, 0666, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
 	{ "tid", &spufs_tid_fops, 0444, },
@@ -2617,6 +2673,11 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{},
 };
 
+struct spufs_tree_descr spufs_dir_debug_contents[] = {
+	{ ".ctx", &spufs_ctx_fops, 0444, },
+	{},
+};
+
 struct spufs_coredump_reader spufs_coredump_read[] = {
 	{ "regs", __spufs_regs_read, NULL, sizeof(struct spu_reg128[128])},
 	{ "fpcr", __spufs_fpcr_read, NULL, sizeof(struct spu_reg128) },
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index f407b2471855..7123472801d9 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -42,10 +42,19 @@
 
 #include "spufs.h"
 
+struct spufs_sb_info {
+	int debug;
+};
+
 static struct kmem_cache *spufs_inode_cache;
 char *isolated_loader;
 static int isolated_loader_size;
 
+static struct spufs_sb_info *spufs_get_sb_info(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
 static struct inode *
 spufs_alloc_inode(struct super_block *sb)
 {
@@ -109,7 +118,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
 static int
 spufs_new_file(struct super_block *sb, struct dentry *dentry,
 		const struct file_operations *fops, int mode,
-		struct spu_context *ctx)
+		size_t size, struct spu_context *ctx)
 {
 	static struct inode_operations spufs_file_iops = {
 		.setattr = spufs_setattr,
@@ -125,6 +134,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry,
 	ret = 0;
 	inode->i_op = &spufs_file_iops;
 	inode->i_fop = fops;
+	inode->i_size = size;
 	inode->i_private = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
 	d_add(dentry, inode);
 out:
@@ -177,7 +187,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir)
 	return simple_rmdir(parent, dir);
 }
 
-static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
+static int spufs_fill_dir(struct dentry *dir, struct spufs_tree_descr *files,
 			  int mode, struct spu_context *ctx)
 {
 	struct dentry *dentry, *tmp;
@@ -189,7 +199,7 @@ static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
 		if (!dentry)
 			goto out;
 		ret = spufs_new_file(dir->d_sb, dentry, files->ops,
-					files->mode & mode, ctx);
+					files->mode & mode, files->size, ctx);
 		if (ret)
 			goto out;
 		files++;
@@ -279,6 +289,13 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 	if (ret)
 		goto out_free_ctx;
 
+	if (spufs_get_sb_info(dir->i_sb)->debug)
+		ret = spufs_fill_dir(dentry, spufs_dir_debug_contents,
+				mode, ctx);
+
+	if (ret)
+		goto out_free_ctx;
+
 	d_instantiate(dentry, inode);
 	dget(dentry);
 	dir->i_nlink++;
@@ -639,18 +656,19 @@ out:
 
 /* File system initialization */
 enum {
-	Opt_uid, Opt_gid, Opt_mode, Opt_err,
+	Opt_uid, Opt_gid, Opt_mode, Opt_debug, Opt_err,
 };
 
 static match_table_t spufs_tokens = {
-	{ Opt_uid,  "uid=%d" },
-	{ Opt_gid,  "gid=%d" },
-	{ Opt_mode, "mode=%o" },
-	{ Opt_err,   NULL  },
+	{ Opt_uid,   "uid=%d" },
+	{ Opt_gid,   "gid=%d" },
+	{ Opt_mode,  "mode=%o" },
+	{ Opt_debug, "debug" },
+	{ Opt_err,    NULL  },
 };
 
 static int
-spufs_parse_options(char *options, struct inode *root)
+spufs_parse_options(struct super_block *sb, char *options, struct inode *root)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -678,6 +696,9 @@ spufs_parse_options(char *options, struct inode *root)
 				return 0;
 			root->i_mode = option | S_IFDIR;
 			break;
+		case Opt_debug:
+			spufs_get_sb_info(sb)->debug = 1;
+			break;
 		default:
 			return 0;
 		}
@@ -736,7 +757,7 @@ spufs_create_root(struct super_block *sb, void *data)
 	SPUFS_I(inode)->i_ctx = NULL;
 
 	ret = -EINVAL;
-	if (!spufs_parse_options(data, inode))
+	if (!spufs_parse_options(sb, data, inode))
 		goto out_iput;
 
 	ret = -ENOMEM;
@@ -754,6 +775,7 @@ out:
 static int
 spufs_fill_super(struct super_block *sb, void *data, int silent)
 {
+	struct spufs_sb_info *info;
 	static struct super_operations s_ops = {
 		.alloc_inode = spufs_alloc_inode,
 		.destroy_inode = spufs_destroy_inode,
@@ -765,11 +787,16 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
 
 	save_mount_options(sb, data);
 
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	sb->s_blocksize = PAGE_CACHE_SIZE;
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
 	sb->s_magic = SPUFS_MAGIC;
 	sb->s_op = &s_ops;
+	sb->s_fs_info = info;
 
 	return spufs_create_root(sb, data);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index e929e70a84e3..34654743363d 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -899,7 +899,8 @@ static noinline void spusched_tick(struct spu_context *ctx)
 			spu_add_to_rq(ctx);
 	} else {
 		spu_context_nospu_trace(spusched_tick__newslice, ctx);
-		ctx->time_slice++;
+		if (!ctx->time_slice)
+			ctx->time_slice++;
 	}
 out:
 	spu_release(ctx);
@@ -993,6 +994,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 	struct timespec ts;
 	struct spu *spu;
 	enum spu_utilization_state old_state;
+	int node;
 
 	ktime_get_ts(&ts);
 	curtime = timespec_to_ns(&ts);
@@ -1014,6 +1016,11 @@ void spuctx_switch_state(struct spu_context *ctx,
 		spu->stats.times[old_state] += delta;
 		spu->stats.util_state = new_state;
 		spu->stats.tstamp = curtime;
+		node = spu->node;
+		if (old_state == SPU_UTIL_USER)
+			atomic_dec(&cbe_spu_info[node].busy_spus);
+		if (new_state == SPU_UTIL_USER);
+			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 454c277c1457..8ae8ef9dfc22 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -32,6 +32,13 @@
 #include <asm/spu_csa.h>
 #include <asm/spu_info.h>
 
+#define SPUFS_PS_MAP_SIZE	0x20000
+#define SPUFS_MFC_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_SIGNAL_MAP_SIZE	PAGE_SIZE
+#define SPUFS_MSS_MAP_SIZE	0x1000
+
 /* The magic number for our file system */
 enum {
 	SPUFS_MAGIC = 0x23c9b64e,
@@ -228,8 +235,16 @@ struct spufs_inode_info {
 #define SPUFS_I(inode) \
 	container_of(inode, struct spufs_inode_info, vfs_inode)
 
-extern struct tree_descr spufs_dir_contents[];
-extern struct tree_descr spufs_dir_nosched_contents[];
+struct spufs_tree_descr {
+	const char *name;
+	const struct file_operations *ops;
+	int mode;
+	size_t size;
+};
+
+extern struct spufs_tree_descr spufs_dir_contents[];
+extern struct spufs_tree_descr spufs_dir_nosched_contents[];
+extern struct spufs_tree_descr spufs_dir_debug_contents[];
 
 /* system call implementation */
 extern struct spufs_calls spufs_calls;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 53202422ba72..8c0e95766a62 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -182,10 +182,10 @@ struct spu_probe spu_probes[] = {
 	{ "spu_yield__enter", "ctx %p", spu_context_nospu_event },
 	{ "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
 	{ "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__sleep", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__wake", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__insert", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
 	{ "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
 	{ "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
 	{ "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 116babbaaf81..1ba7ce5aafae 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -63,13 +63,6 @@ static struct mpic *chrp_mpic;
 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
 unsigned long event_scan_interval;
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 extern unsigned long loops_per_jiffy;
 
 /* To be replaced by RTAS when available */
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 429088967813..4f9f8184d164 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -59,6 +59,16 @@ config PPC_PRPMC2800
 	help
 	  This option enables support for the Motorola PrPMC2800 board
 
+config PPC_C2K
+	bool "SBS/GEFanuc C2K board"
+	depends on EMBEDDED6xx
+	select MV64X60
+	select NOT_COHERENT_CACHE
+	select MTD_CFI_I4
+	help
+	  This option enables support for the GE Fanuc C2K board (formerly
+	  an SBS board).
+
 config TSI108_BRIDGE
 	bool
 	select PCI
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 06524d3ffd2e..0773c08bd444 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
 obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
 obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
+obj-$(CONFIG_PPC_C2K)		+= c2k.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
new file mode 100644
index 000000000000..d0b25b8c39d1
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -0,0 +1,158 @@
+/*
+ * Board setup routines for the GEFanuc C2K board
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/kexec.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/time.h>
+
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mv64x60.h>
+
+#define MV64x60_MPP_CNTL_0	0x0000
+#define MV64x60_MPP_CNTL_2	0x0008
+
+#define MV64x60_GPP_IO_CNTL	0x0000
+#define MV64x60_GPP_LEVEL_CNTL	0x0010
+#define MV64x60_GPP_VALUE_SET	0x0018
+
+static void __iomem *mv64x60_mpp_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+static void __init c2k_setup_arch(void)
+{
+	struct device_node *np;
+	phys_addr_t paddr;
+	const unsigned int *reg;
+
+	/*
+	 * ioremap mpp and gpp registers in case they are later
+	 * needed by c2k_reset_board().
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+
+#ifdef CONFIG_PCI
+	mv64x60_pci_init();
+#endif
+}
+
+static void c2k_reset_board(void)
+{
+	u32 temp;
+
+	local_irq_disable();
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
+}
+
+static void c2k_restart(char *cmd)
+{
+	c2k_reset_board();
+	msleep(100);
+	panic("restart failed\n");
+}
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define COHERENCY_SETTING "off"
+#else
+#define COHERENCY_SETTING "on"
+#endif
+
+void c2k_show_cpuinfo(struct seq_file *m)
+{
+	uint memsize = total_memory;
+
+	seq_printf(m, "Vendor\t\t: GEFanuc\n");
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init c2k_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K"))
+		return 0;
+
+	printk(KERN_INFO "Detected a GEFanuc C2K board\n");
+
+	_set_L2CR(0);
+	_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
+	return 1;
+}
+
+define_machine(c2k) {
+	.name			= "C2K",
+	.probe			= c2k_probe,
+	.setup_arch		= c2k_setup_arch,
+	.init_early		= mv64x60_init_early,
+	.show_cpuinfo		= c2k_show_cpuinfo,
+	.init_IRQ		= mv64x60_init_irq,
+	.get_irq		= mv64x60_get_irq,
+	.restart		= c2k_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+	.machine_kexec		= default_machine_kexec,
+	.machine_kexec_prepare	= default_machine_kexec_prepare,
+	.machine_crash_shutdown	= default_machine_crash_shutdown,
+#endif
+};
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 11fa3c772ed5..ab5d8687c3cf 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -214,13 +214,13 @@ dma_addr_t iseries_hv_map(void *vaddr, size_t size,
 			enum dma_data_direction direction)
 {
 	return iommu_map_single(NULL, &vio_iommu_table, vaddr, size,
-				DMA_32BIT_MASK, direction);
+				DMA_32BIT_MASK, direction, NULL);
 }
 
 void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
 			enum dma_data_direction direction)
 {
-	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction);
+	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction, NULL);
 }
 
 void __init iommu_vio_init(void)
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 9f7579b38c72..53bca132fb48 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -41,8 +41,6 @@
 #define DBG(x...)
 #endif
 
-extern void GregorianDay(struct rtc_time * tm);
-
 static int maple_rtc_addr;
 
 static int maple_clock_read(int addr)
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 829b8b02527b..6d149ae8ffa7 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -34,16 +34,10 @@
 #include <asm/time.h>
 #include <asm/pmac_feature.h>
 #include <asm/mpic.h>
+#include <asm/xmon.h>
 
 #include "pmac.h"
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 #ifdef CONFIG_PPC32
 struct pmac_irq_hw {
         unsigned int    event;
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cb2d894541c6..4ae3d00e0bdd 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -36,6 +36,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/atomic.h>
+#include <asm/code-patching.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -786,8 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
-	volatile unsigned int *vector
-		 = ((volatile unsigned int *)(KERNELBASE+0x100));
+	unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
 
 	if (nr < 0 || nr > 3)
 		return;
@@ -804,7 +804,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
 	 */
 	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Put some life in our friend */
 	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 43c493fca2d0..d66c3628a112 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -349,9 +349,14 @@ static int ps3_system_bus_match(struct device *_dev,
 
 	result = dev->match_id == drv->match_id;
 
-	pr_info("%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__, __LINE__,
-		dev->match_id, dev->core.bus_id, drv->match_id, drv->core.name,
-		(result ? "match" : "miss"));
+	if (result)
+		pr_info("%s:%d: dev=%u(%s), drv=%u(%s): match\n", __func__,
+			__LINE__, dev->match_id, dev->core.bus_id,
+			drv->match_id, drv->core.name);
+	else
+		pr_debug("%s:%d: dev=%u(%s), drv=%u(%s): miss\n", __func__,
+			__LINE__, dev->match_id, dev->core.bus_id,
+			drv->match_id, drv->core.name);
 	return result;
 }
 
@@ -362,7 +367,7 @@ static int ps3_system_bus_probe(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -370,10 +375,10 @@ static int ps3_system_bus_probe(struct device *_dev)
 	if (drv->probe)
 		result = drv->probe(dev);
 	else
-		pr_info("%s:%d: %s no probe method\n", __func__, __LINE__,
+		pr_debug("%s:%d: %s no probe method\n", __func__, __LINE__,
 			dev->core.bus_id);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -384,7 +389,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -395,7 +400,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 		dev_dbg(&dev->core, "%s:%d %s: no remove method\n",
 			__func__, __LINE__, drv->core.name);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -550,7 +555,7 @@ static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr,
  */
 
 static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
+	enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -570,7 +575,8 @@ static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
 
 static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 				      size_t size,
-				      enum dma_data_direction direction)
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -603,7 +609,7 @@ static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 }
 
 static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
+	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -617,7 +623,7 @@ static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
 }
 
 static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -646,14 +652,15 @@ static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
 
 static int ps3_ioc0_map_sg(struct device *_dev, struct scatterlist *sg,
 			   int nents,
-			   enum dma_data_direction direction)
+			   enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
 {
 	BUG();
 	return 0;
 }
 
 static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -661,7 +668,8 @@ static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
 }
 
 static void ps3_ioc0_unmap_sg(struct device *_dev, struct scatterlist *sg,
-			    int nents, enum dma_data_direction direction)
+			    int nents, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	BUG();
 }
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6f544ba4b37f..c027f0a70a04 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -812,6 +812,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
 static inline void __restore_bars (struct pci_dn *pdn)
 {
 	int i;
+	u32 cmd;
 
 	if (NULL==pdn->phb) return;
 	for (i=4; i<10; i++) {
@@ -832,6 +833,19 @@ static inline void __restore_bars (struct pci_dn *pdn)
 
 	/* max latency, min grant, interrupt pin and line */
 	rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+
+	/* Restore PERR & SERR bits, some devices require it,
+	   don't touch the other command bits */
+	rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
+	if (pdn->config_space[1] & PCI_COMMAND_PARITY)
+		cmd |= PCI_COMMAND_PARITY;
+	else
+		cmd &= ~PCI_COMMAND_PARITY;
+	if (pdn->config_space[1] & PCI_COMMAND_SERR)
+		cmd |= PCI_COMMAND_SERR;
+	else
+		cmd &= ~PCI_COMMAND_SERR;
+	rtas_write_config(pdn, PCI_COMMAND, 4, cmd);
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 9d3a40f45974..5a707da3f5c2 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -26,6 +26,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 
+#include "pseries.h"
 
 typedef struct {
     unsigned long val;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 3c5727dd5aa5..a1a368dd2d99 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -15,34 +15,13 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 
-static int pseries_remove_memory(struct device_node *np)
+static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 {
-	const char *type;
-	const unsigned int *my_index;
-	const unsigned int *regs;
-	u64 start_pfn, start;
+	unsigned long start, start_pfn;
 	struct zone *zone;
-	int ret = -EINVAL;
-
-	/*
-	 * Check to see if we are actually removing memory
-	 */
-	type = of_get_property(np, "device_type", NULL);
-	if (type == NULL || strcmp(type, "memory") != 0)
-		return 0;
+	int ret;
 
-	/*
-	 * Find the memory index and size of the removing section
-	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
-		return ret;
-
-	regs = of_get_property(np, "reg", NULL);
-	if (!regs)
-		return ret;
-
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	start_pfn = base >> PFN_SECTION_SHIFT;
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
@@ -54,56 +33,111 @@ static int pseries_remove_memory(struct device_node *np)
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, regs[3] >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(start_pfn << PAGE_SHIFT, regs[3]);
+	lmb_remove(base, lmb_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
-	start = (unsigned long)__va(start_pfn << PAGE_SHIFT);
-	ret = remove_section_mapping(start, start + regs[3]);
+	start = (unsigned long)__va(base);
+	ret = remove_section_mapping(start, start + lmb_size);
 	return ret;
 }
 
-static int pseries_add_memory(struct device_node *np)
+static int pseries_remove_memory(struct device_node *np)
 {
 	const char *type;
-	const unsigned int *my_index;
 	const unsigned int *regs;
-	u64 start_pfn;
+	unsigned long base;
+	unsigned int lmb_size;
 	int ret = -EINVAL;
 
 	/*
-	 * Check to see if we are actually adding memory
+	 * Check to see if we are actually removing memory
 	 */
 	type = of_get_property(np, "device_type", NULL);
 	if (type == NULL || strcmp(type, "memory") != 0)
 		return 0;
 
 	/*
-	 * Find the memory index and size of the added section
+	 * Find the bae address and size of the lmb
 	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
+	regs = of_get_property(np, "reg", NULL);
+	if (!regs)
 		return ret;
 
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
+
+	ret = pseries_remove_lmb(base, lmb_size);
+	return ret;
+}
+
+static int pseries_add_memory(struct device_node *np)
+{
+	const char *type;
+	const unsigned int *regs;
+	unsigned long base;
+	unsigned int lmb_size;
+	int ret = -EINVAL;
+
+	/*
+	 * Check to see if we are actually adding memory
+	 */
+	type = of_get_property(np, "device_type", NULL);
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/*
+	 * Find the base and size of the lmb
+	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
 		return ret;
 
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
 
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	lmb_add(start_pfn << PAGE_SHIFT, regs[3]);
-	return 0;
+	ret = lmb_add(base, lmb_size);
+	return (ret < 0) ? -EINVAL : 0;
+}
+
+static int pseries_drconf_memory(unsigned long *base, unsigned int action)
+{
+	struct device_node *np;
+	const unsigned long *lmb_size;
+	int rc;
+
+	np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (!np)
+		return -EINVAL;
+
+	lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
+	if (!lmb_size) {
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	if (action == PSERIES_DRCONF_MEM_ADD) {
+		rc = lmb_add(*base, *lmb_size);
+		rc = (rc < 0) ? -EINVAL : 0;
+	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
+		rc = pseries_remove_lmb(*base, *lmb_size);
+	} else {
+		rc = -EINVAL;
+	}
+
+	of_node_put(np);
+	return rc;
 }
 
 static int pseries_memory_notifier(struct notifier_block *nb,
@@ -120,6 +154,11 @@ static int pseries_memory_notifier(struct notifier_block *nb,
 		if (pseries_remove_memory(node))
 			err = NOTIFY_BAD;
 		break;
+	case PSERIES_DRCONF_MEM_ADD:
+	case PSERIES_DRCONF_MEM_REMOVE:
+		if (pseries_drconf_memory(node, action))
+			err = NOTIFY_BAD;
+		break;
 	default:
 		err = NOTIFY_DONE;
 		break;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 176f1f39d2d5..9a12908510fb 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -135,9 +135,10 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	u64 rpn;
 	long l, limit;
 
-	if (npages == 1)
-		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					   direction);
+	if (npages == 1) {
+		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction);
+		return;
+	}
 
 	tcep = __get_cpu_var(tce_page);
 
@@ -147,9 +148,11 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	if (!tcep) {
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
-		if (!tcep)
-			return tce_build_pSeriesLP(tbl, tcenum, npages,
-						   uaddr, direction);
+		if (!tcep) {
+			tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+					    direction);
+			return;
+		}
 		__get_cpu_var(tce_page) = tcep;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index e9dd5fe081c9..53cbd53d8740 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -70,4 +70,4 @@ static int __init pseries_kexec_setup(void)
 
 	return 0;
 }
-__initcall(pseries_kexec_setup);
+machine_device_initcall(pseries, pseries_kexec_setup);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 2cbaedb17f3e..52a80e5840e8 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(plpar_hcall_norets);
 extern void pSeries_find_serial_port(void);
 
 
-int vtermno;	/* virtual terminal# for udbg  */
+static int vtermno;	/* virtual terminal# for udbg  */
 
 #define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
 static void udbg_hvsi_putc(char c)
@@ -305,7 +305,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	flags = 0;
 
 	/* Make pHyp happy */
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
 
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 2b548afd1003..d20b96e22c2e 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -55,7 +55,7 @@
 static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(ras_log_buf_lock);
 
-char mce_data_buf[RTAS_ERROR_LOG_MAX];
+static char mce_data_buf[RTAS_ERROR_LOG_MAX];
 
 static int ras_get_sensor_state_token;
 static int ras_check_exception_token;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 75769aae41d5..7637bd38c795 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -365,7 +365,7 @@ static char *parse_node(char *buf, size_t bufsize, struct device_node **npp)
 	*buf = '\0';
 	buf++;
 
-	handle = simple_strtoul(handle_str, NULL, 10);
+	handle = simple_strtoul(handle_str, NULL, 0);
 
 	*npp = of_find_node_by_phandle(handle);
 	return buf;
@@ -422,8 +422,8 @@ static int do_update_property(char *buf, size_t bufsize)
 {
 	struct device_node *np;
 	unsigned char *value;
-	char *name, *end;
-	int length;
+	char *name, *end, *next_prop;
+	int rc, length;
 	struct property *newprop, *oldprop;
 	buf = parse_node(buf, bufsize, &np);
 	end = buf + bufsize;
@@ -431,7 +431,8 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!np)
 		return -ENODEV;
 
-	if (parse_next_property(buf, end, &name, &length, &value) == NULL)
+	next_prop = parse_next_property(buf, end, &name, &length, &value);
+	if (!next_prop)
 		return -EINVAL;
 
 	newprop = new_property(name, length, value, NULL);
@@ -442,7 +443,34 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!oldprop)
 		return -ENODEV;
 
-	return prom_update_property(np, newprop, oldprop);
+	rc = prom_update_property(np, newprop, oldprop);
+	if (rc)
+		return rc;
+
+	/* For memory under the ibm,dynamic-reconfiguration-memory node
+	 * of the device tree, adding and removing memory is just an update
+	 * to the ibm,dynamic-memory property instead of adding/removing a
+	 * memory node in the device tree.  For these cases we still need to
+	 * involve the notifier chain.
+	 */
+	if (!strcmp(name, "ibm,dynamic-memory")) {
+		int action;
+
+		next_prop = parse_next_property(next_prop, end, &name,
+						&length, &value);
+		if (!next_prop)
+			return -EINVAL;
+
+		if (!strcmp(name, "add"))
+			action = PSERIES_DRCONF_MEM_ADD;
+		else
+			action = PSERIES_DRCONF_MEM_REMOVE;
+
+		blocking_notifier_call_chain(&pSeries_reconfig_chain,
+					     action, value);
+	}
+
+	return 0;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index 7d3e2b0bd4d2..c9ffd8c225f1 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -32,7 +32,7 @@
 
 static DEFINE_SPINLOCK(rtasd_log_lock);
 
-DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
 
 static char *rtas_log_buf;
 static unsigned long rtas_log_start;
@@ -329,7 +329,7 @@ static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
 	return 0;
 }
 
-const struct file_operations proc_rtas_log_operations = {
+static const struct file_operations proc_rtas_log_operations = {
 	.read =		rtas_log_read,
 	.poll =		rtas_log_poll,
 	.open =		rtas_log_open,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index f5d29f5b13c1..90beb444e1dd 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -109,7 +109,7 @@ static void __init fwnmi_init(void)
 		fwnmi_active = 1;
 }
 
-void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
+static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq = i8259_irq();
 	if (cascade_irq != NO_IRQ)
@@ -482,7 +482,7 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
  * possible with power button press. If ibm,power-off-ups token is used
  * it will allow auto poweron after power is restored.
  */
-void pSeries_power_off(void)
+static void pSeries_power_off(void)
 {
 	int rc;
 	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
new file mode 100644
index 000000000000..21cda085d926
--- /dev/null
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -0,0 +1,52 @@
+/*
+ * Enter and leave sleep state on chips with 6xx-style HID0
+ * power management bits, which don't leave sleep state via reset.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(mpc6xx_enter_standby)
+	mflr	r4
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	lis	r5, ret_from_standby@h
+	ori	r5, r5, ret_from_standby@l
+	mtlr	r5
+
+	rlwinm	r5, r1, 0, 0, 31-THREAD_SHIFT
+	lwz	r6, TI_LOCAL_FLAGS(r5)
+	ori	r6, r6, _TLF_SLEEPING
+	stw	r6, TI_LOCAL_FLAGS(r5)
+
+	mfmsr	r5
+	ori	r5, r5, MSR_EE
+	oris	r5, r5, MSR_POW@h
+	sync
+	mtmsr	r5
+	isync
+
+1:	b	1b
+
+ret_from_standby:
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~HID0_SLEEP
+	mtspr	SPRN_HID0, r5
+
+	mtlr	r4
+	blr
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 6d386d0071a0..16a0ed28eb00 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,6 +4,7 @@ endif
 
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
 
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -11,8 +12,9 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
@@ -40,7 +42,12 @@ endif
 ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
+obj-$(CONFIG_QUICC_ENGINE)	+= cpm_common.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
 endif
+
+ifeq ($(CONFIG_SUSPEND),y)
+obj-$(CONFIG_6xx)		+= 6xx-suspend.o
+endif
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 64ec7d629363..446c9ea85b30 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -443,7 +443,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
 
 	/* Done ! */
 	printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
-		bcom_eng->regs_base);
+		(long)bcom_eng->regs_base);
 
 	return 0;
 
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index 8d33eafbb3f4..a3a134c35b0a 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -20,6 +20,7 @@
 #include <asm/io.h>
 
 #include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
 
 #include "bestcomm.h"
 #include "bestcomm_priv.h"
@@ -253,6 +254,100 @@ bcom_gen_bd_tx_release(struct bcom_task *tsk)
 }
 EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
 
+/* ---------------------------------------------------------------------
+ * PSC support code
+ */
+
+/**
+ * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
+ *
+ * This structure is only used internally.  It is a lookup table for PSC
+ * specific parameters to bestcomm tasks.
+ */
+static struct bcom_psc_params {
+	int rx_initiator;
+	int rx_ipr;
+	int tx_initiator;
+	int tx_ipr;
+} bcom_psc_params[] = {
+	[0] = {
+		.rx_initiator = BCOM_INITIATOR_PSC1_RX,
+		.rx_ipr = BCOM_IPR_PSC1_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC1_TX,
+		.tx_ipr = BCOM_IPR_PSC1_TX,
+	},
+	[1] = {
+		.rx_initiator = BCOM_INITIATOR_PSC2_RX,
+		.rx_ipr = BCOM_IPR_PSC2_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC2_TX,
+		.tx_ipr = BCOM_IPR_PSC2_TX,
+	},
+	[2] = {
+		.rx_initiator = BCOM_INITIATOR_PSC3_RX,
+		.rx_ipr = BCOM_IPR_PSC3_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC3_TX,
+		.tx_ipr = BCOM_IPR_PSC3_TX,
+	},
+	[3] = {
+		.rx_initiator = BCOM_INITIATOR_PSC4_RX,
+		.rx_ipr = BCOM_IPR_PSC4_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC4_TX,
+		.tx_ipr = BCOM_IPR_PSC4_TX,
+	},
+	[4] = {
+		.rx_initiator = BCOM_INITIATOR_PSC5_RX,
+		.rx_ipr = BCOM_IPR_PSC5_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC5_TX,
+		.tx_ipr = BCOM_IPR_PSC5_TX,
+	},
+	[5] = {
+		.rx_initiator = BCOM_INITIATOR_PSC6_RX,
+		.rx_ipr = BCOM_IPR_PSC6_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC6_TX,
+		.tx_ipr = BCOM_IPR_PSC6_TX,
+	},
+};
+
+/**
+ * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ * @maxbufsize:	Maximum receive data size in bytes.
+ *
+ * Allocate a bestcomm task structure for receiving data from a PSC.
+ */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize)
+{
+	if (psc_num >= MPC52xx_PSC_MAXNUM)
+		return NULL;
+
+	return bcom_gen_bd_rx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].rx_initiator,
+				   bcom_psc_params[psc_num].rx_ipr,
+				   maxbufsize);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
+
+/**
+ * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ *
+ * Allocate a bestcomm task structure for transmitting data to a PSC.
+ */
+struct bcom_task *
+bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
+{
+	struct psc;
+	return bcom_gen_bd_tx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].tx_initiator,
+				   bcom_psc_params[psc_num].tx_ipr);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
+
 
 MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
 MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h
index 5b6fa803c6aa..de47260e69da 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.h
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h
@@ -44,5 +44,10 @@ extern void
 bcom_gen_bd_tx_release(struct bcom_task *tsk);
 
 
+/* PSC support utility wrappers */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize);
+struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo);
 #endif  /* __BESTCOMM_GEN_BD_H__ */
 
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 99784383a843..5d74ef7a651f 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -86,7 +86,7 @@ int bcom_sram_init(struct device_node *sram_node, char *owner)
 	if (!bcom_sram->base_virt) {
 		printk(KERN_ERR "%s: bcom_sram_init: "
 			"Map error SRAM zone 0x%08lx (0x%0x)!\n",
-			owner, bcom_sram->base_phys, bcom_sram->size );
+			owner, (long)bcom_sram->base_phys, bcom_sram->size );
 		rv = -ENOMEM;
 		goto error_release;
 	}
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 58292a086c16..661df42830b9 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -159,7 +159,7 @@ unsigned int cpm_pic_init(void)
 
 	out_be32(&cpic_reg->cpic_cimr, 0);
 
-	cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR,
+	cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
 				      64, &cpm_pic_host_ops, 64);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 5fe65b2f8f3a..b16ca3ed65d2 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -266,7 +266,7 @@ void cpm2_pic_init(struct device_node *node)
 	out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
 
 	/* create a legacy host */
-	cpm2_pic_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	cpm2_pic_host = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       64, &cpm2_pic_host_ops, 64);
 	if (cpm2_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index cb7df2dce44f..e4b7296acb2c 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -37,7 +37,7 @@ static void udbg_putc_cpm(char c)
 	u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
 
 	if (c == '\n')
-		udbg_putc('\r');
+		udbg_putc_cpm('\r');
 
 	while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
 		;
@@ -53,7 +53,6 @@ void __init udbg_init_cpm(void)
 		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
 #endif
 		udbg_putc = udbg_putc_cpm;
-		udbg_putc('X');
 	}
 }
 #endif
@@ -85,9 +84,13 @@ int __init cpm_muram_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
 	if (!np) {
-		printk(KERN_ERR "Cannot find CPM muram data node");
-		ret = -ENODEV;
-		goto out;
+		/* try legacy bindings */
+		np = of_find_node_by_name(NULL, "data-only");
+		if (!np) {
+			printk(KERN_ERR "Cannot find CPM muram data node");
+			ret = -ENODEV;
+			goto out;
+		}
 	}
 
 	muram_pbase = of_translate_address(np, zero);
@@ -189,6 +192,12 @@ void __iomem *cpm_muram_addr(unsigned long offset)
 }
 EXPORT_SYMBOL(cpm_muram_addr);
 
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index 437e48d3ae33..a8ba9983dd5a 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -23,6 +23,107 @@
 #include <asm/prom.h>
 #include <asm/dcr.h>
 
+#ifdef CONFIG_PPC_DCR_MMIO
+static struct device_node *find_dcr_parent(struct device_node *node)
+{
+	struct device_node *par, *tmp;
+	const u32 *p;
+
+	for (par = of_node_get(node); par;) {
+		if (of_get_property(par, "dcr-controller", NULL))
+			break;
+		p = of_get_property(par, "dcr-parent", NULL);
+		tmp = par;
+		if (p == NULL)
+			par = of_get_parent(par);
+		else
+			par = of_find_node_by_phandle(*p);
+		of_node_put(tmp);
+	}
+	return par;
+}
+#endif
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+bool dcr_map_ok_generic(dcr_host_t host)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_map_ok_native(host.host.native);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_map_ok_mmio(host.host.mmio);
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_map_ok_generic);
+
+dcr_host_t dcr_map_generic(struct device_node *dev,
+			   unsigned int dcr_n,
+			   unsigned int dcr_c)
+{
+	dcr_host_t host;
+	struct device_node *dp;
+	const char *prop;
+
+	host.type = DCR_HOST_INVALID;
+
+	dp = find_dcr_parent(dev);
+	if (dp == NULL)
+		return host;
+
+	prop = of_get_property(dp, "dcr-access-method", NULL);
+
+	pr_debug("dcr_map_generic(dcr-access-method = %s)\n", prop);
+
+	if (!strcmp(prop, "native")) {
+		host.type = DCR_HOST_NATIVE;
+		host.host.native = dcr_map_native(dev, dcr_n, dcr_c);
+	} else if (!strcmp(prop, "mmio")) {
+		host.type = DCR_HOST_MMIO;
+		host.host.mmio = dcr_map_mmio(dev, dcr_n, dcr_c);
+	}
+
+	of_node_put(dp);
+	return host;
+}
+EXPORT_SYMBOL_GPL(dcr_map_generic);
+
+void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_unmap_native(host.host.native, dcr_c);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_unmap_mmio(host.host.mmio, dcr_c);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_unmap_generic);
+
+u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_read_native(host.host.native, dcr_n);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_read_mmio(host.host.mmio, dcr_n);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_read_generic);
+
+void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_write_native(host.host.native, dcr_n, value);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_write_mmio(host.host.mmio, dcr_n, value);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_write_generic);
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
 unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
 {
 	unsigned int ds;
@@ -47,26 +148,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index)
 }
 EXPORT_SYMBOL_GPL(dcr_resource_len);
 
-#ifndef CONFIG_PPC_DCR_NATIVE
-
-static struct device_node * find_dcr_parent(struct device_node * node)
-{
-	struct device_node *par, *tmp;
-	const u32 *p;
-
-	for (par = of_node_get(node); par;) {
-		if (of_get_property(par, "dcr-controller", NULL))
-			break;
-		p = of_get_property(par, "dcr-parent", NULL);
-		tmp = par;
-		if (p == NULL)
-			par = of_get_parent(par);
-		else
-			par = of_find_node_by_phandle(*p);
-		of_node_put(tmp);
-	}
-	return par;
-}
+#ifdef CONFIG_PPC_DCR_MMIO
 
 u64 of_translate_dcr_address(struct device_node *dev,
 			     unsigned int dcr_n,
@@ -75,7 +157,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	struct device_node *dp;
 	const u32 *p;
 	unsigned int stride;
-	u64 ret;
+	u64 ret = OF_BAD_ADDR;
 
 	dp = find_dcr_parent(dev);
 	if (dp == NULL)
@@ -90,7 +172,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	if (p == NULL)
 		p = of_get_property(dp, "dcr-mmio-space", NULL);
 	if (p == NULL)
-		return OF_BAD_ADDR;
+		goto done;
 
 	/* Maybe could do some better range checking here */
 	ret = of_translate_address(dp, p);
@@ -98,21 +180,25 @@ u64 of_translate_dcr_address(struct device_node *dev,
 		ret += (u64)(stride) * (u64)dcr_n;
 	if (out_stride)
 		*out_stride = stride;
+
+ done:
+	of_node_put(dp);
 	return ret;
 }
 
-dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
-		   unsigned int dcr_c)
+dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+			     unsigned int dcr_n,
+			     unsigned int dcr_c)
 {
-	dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
+	dcr_host_mmio_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
 	u64 addr;
 
 	pr_debug("dcr_map(%s, 0x%x, 0x%x)\n",
 		 dev->full_name, dcr_n, dcr_c);
 
 	addr = of_translate_dcr_address(dev, dcr_n, &ret.stride);
-	pr_debug("translates to addr: 0x%lx, stride: 0x%x\n",
-		 addr, ret.stride);
+	pr_debug("translates to addr: 0x%llx, stride: 0x%x\n",
+		 (unsigned long long) addr, ret.stride);
 	if (addr == OF_BAD_ADDR)
 		return ret;
 	pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride);
@@ -124,11 +210,11 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
 	ret.token -= dcr_n * ret.stride;
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dcr_map);
+EXPORT_SYMBOL_GPL(dcr_map_mmio);
 
-void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
+void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c)
 {
-	dcr_host_t h = host;
+	dcr_host_mmio_t h = host;
 
 	if (h.token == NULL)
 		return;
@@ -136,7 +222,11 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
 	iounmap(h.token);
 	h.token = NULL;
 }
-EXPORT_SYMBOL_GPL(dcr_unmap);
-#else	/* defined(CONFIG_PPC_DCR_NATIVE) */
+EXPORT_SYMBOL_GPL(dcr_unmap_mmio);
+
+#endif /* defined(CONFIG_PPC_DCR_MMIO) */
+
+#ifdef CONFIG_PPC_DCR_NATIVE
 DEFINE_SPINLOCK(dcr_ind_lock);
-#endif	/* !defined(CONFIG_PPC_DCR_NATIVE) */
+#endif	/* defined(CONFIG_PPC_DCR_NATIVE) */
+
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
new file mode 100644
index 000000000000..714ec02fed2e
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -0,0 +1,434 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/fsl_gtm.h>
+
+#define GTCFR_STP(x)		((x) & 1 ? 1 << 5 : 1 << 1)
+#define GTCFR_RST(x)		((x) & 1 ? 1 << 4 : 1 << 0)
+
+#define GTMDR_ICLK_MASK		(3 << 1)
+#define GTMDR_ICLK_ICAS		(0 << 1)
+#define GTMDR_ICLK_ICLK		(1 << 1)
+#define GTMDR_ICLK_SLGO		(2 << 1)
+#define GTMDR_FRR		(1 << 3)
+#define GTMDR_ORI		(1 << 4)
+#define GTMDR_SPS(x)		((x) << 8)
+
+struct gtm_timers_regs {
+	u8	gtcfr1;		/* Timer 1, Timer 2 global config register */
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3, timer 4 global config register */
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtpsr1;		/* Timer 1 prescale register */
+	__be16	gtpsr2;		/* Timer 2 prescale register */
+	__be16	gtpsr3;		/* Timer 3 prescale register */
+	__be16	gtpsr4;		/* Timer 4 prescale register */
+	u8 res2[0x40];
+} __attribute__ ((packed));
+
+struct gtm {
+	unsigned int clock;
+	struct gtm_timers_regs __iomem *regs;
+	struct gtm_timer timers[4];
+	spinlock_t lock;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(gtms);
+
+/**
+ * gtm_get_timer - request GTM timer to use it with the rest of GTM API
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_timer16(void)
+{
+	struct gtm *gtm = NULL;
+	int i;
+
+	list_for_each_entry(gtm, &gtms, list_node) {
+		spin_lock_irq(&gtm->lock);
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			if (!gtm->timers[i].requested) {
+				gtm->timers[i].requested = true;
+				spin_unlock_irq(&gtm->lock);
+				return &gtm->timers[i];
+			}
+		}
+
+		spin_unlock_irq(&gtm->lock);
+	}
+
+	if (gtm)
+		return ERR_PTR(-EBUSY);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(gtm_get_timer16);
+
+/**
+ * gtm_get_specific_timer - request specific GTM timer
+ * @gtm:	specific GTM, pass here GTM's device_node->data
+ * @timer:	specific timer number, Timer1 is 0.
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+					   unsigned int timer)
+{
+	struct gtm_timer *ret = ERR_PTR(-EBUSY);
+
+	if (timer > 3)
+		return ERR_PTR(-EINVAL);
+
+	spin_lock_irq(&gtm->lock);
+
+	if (gtm->timers[timer].requested)
+		goto out;
+
+	ret = &gtm->timers[timer];
+	ret->requested = true;
+
+out:
+	spin_unlock_irq(&gtm->lock);
+	return ret;
+}
+EXPORT_SYMBOL(gtm_get_specific_timer16);
+
+/**
+ * gtm_put_timer16 - release 16 bits GTM timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function releases GTM timer so others may request it.
+ */
+void gtm_put_timer16(struct gtm_timer *tmr)
+{
+	gtm_stop_timer16(tmr);
+
+	spin_lock_irq(&tmr->gtm->lock);
+	tmr->requested = false;
+	spin_unlock_irq(&tmr->gtm->lock);
+}
+EXPORT_SYMBOL(gtm_put_timer16);
+
+/*
+ * This is back-end for the exported functions, it's used to reset single
+ * timer in reference mode.
+ */
+static int gtm_set_ref_timer16(struct gtm_timer *tmr, int frequency,
+			       int reference_value, bool free_run)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned int prescaler;
+	u8 iclk = GTMDR_ICLK_ICLK;
+	u8 psr;
+	u8 sps;
+	unsigned long flags;
+	int max_prescaler = 256 * 256 * 16;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!tmr->gtpsr)
+		max_prescaler /= 256;
+
+	prescaler = gtm->clock / frequency;
+	/*
+	 * We have two 8 bit prescalers -- primary and secondary (psr, sps),
+	 * plus "slow go" mode (clk / 16). So, total prescale value is
+	 * 16 * (psr + 1) * (sps + 1). Though, for CPM2 GTMs we losing psr.
+	 */
+	if (prescaler > max_prescaler)
+		return -EINVAL;
+
+	if (prescaler > max_prescaler / 16) {
+		iclk = GTMDR_ICLK_SLGO;
+		prescaler /= 16;
+	}
+
+	if (prescaler <= 256) {
+		psr = 0;
+		sps = prescaler - 1;
+	} else {
+		psr = 256 - 1;
+		sps = prescaler / 256 - 1;
+	}
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	/*
+	 * Properly reset timers: stop, reset, set up prescalers, reference
+	 * value and clear event register.
+	 */
+	clrsetbits_8(tmr->gtcfr, ~(GTCFR_STP(num) | GTCFR_RST(num)),
+				 GTCFR_STP(num) | GTCFR_RST(num));
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	if (tmr->gtpsr)
+		out_be16(tmr->gtpsr, psr);
+	clrsetbits_be16(tmr->gtmdr, 0xFFFF, iclk | GTMDR_SPS(sps) |
+			GTMDR_ORI | (free_run ? GTMDR_FRR : 0));
+	out_be16(tmr->gtcnr, 0);
+	out_be16(tmr->gtrfr, reference_value);
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	/* Let it be. */
+	clrbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+
+	return 0;
+}
+
+/**
+ * gtm_set_timer16 - (re)set 16 bit timer with arbitrary precision
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets the GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. This
+ * function will reduce the precision of the timer as needed in order for the
+ * requested timeout to fit in a 16-bit register.
+ */
+int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	int freq = 1000000;
+	unsigned int bit;
+
+	bit = fls_long(usec);
+	if (bit > 15) {
+		freq >>= bit - 15;
+		usec >>= bit - 15;
+	}
+
+	if (!freq)
+		return -EINVAL;
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_timer16);
+
+/**
+ * gtm_set_exact_utimer16 - (re)set 16 bits timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. If reload
+ * flag was set, timer will also reset itself upon reference value, otherwise
+ * it continues to increment.
+ *
+ * The _exact_ bit in the function name states that this function will not
+ * crop precision of the "usec" argument, thus usec is limited to 16 bits
+ * (single timer width).
+ */
+int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	const int freq = 1000000;
+
+	/*
+	 * We can lower the frequency (and probably power consumption) by
+	 * dividing both frequency and usec by 2 until there is no remainder.
+	 * But we won't bother with this unless savings are measured, so just
+	 * run the timer as is.
+	 */
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_exact_timer16);
+
+/**
+ * gtm_stop_timer16 - stop single timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function simply stops the GTM timer.
+ */
+void gtm_stop_timer16(struct gtm_timer *tmr)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned long flags;
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+}
+EXPORT_SYMBOL(gtm_stop_timer16);
+
+/**
+ * gtm_ack_timer16 - acknowledge timer event (free-run timers only)
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @events:	events mask to ack
+ * Context:	any
+ *
+ * Thus function used to acknowledge timer interrupt event, use it inside the
+ * interrupt handler.
+ */
+void gtm_ack_timer16(struct gtm_timer *tmr, u16 events)
+{
+	out_be16(tmr->gtevr, events);
+}
+EXPORT_SYMBOL(gtm_ack_timer16);
+
+static void __init gtm_set_shortcuts(struct device_node *np,
+				     struct gtm_timer *timers,
+				     struct gtm_timers_regs __iomem *regs)
+{
+	/*
+	 * Yeah, I don't like this either, but timers' registers a bit messed,
+	 * so we have to provide shortcuts to write timer independent code.
+	 * Alternative option is to create gt*() accessors, but that will be
+	 * even uglier and cryptic.
+	 */
+	timers[0].gtcfr = &regs->gtcfr1;
+	timers[0].gtmdr = &regs->gtmdr1;
+	timers[0].gtcnr = &regs->gtcnr1;
+	timers[0].gtrfr = &regs->gtrfr1;
+	timers[0].gtevr = &regs->gtevr1;
+
+	timers[1].gtcfr = &regs->gtcfr1;
+	timers[1].gtmdr = &regs->gtmdr2;
+	timers[1].gtcnr = &regs->gtcnr2;
+	timers[1].gtrfr = &regs->gtrfr2;
+	timers[1].gtevr = &regs->gtevr2;
+
+	timers[2].gtcfr = &regs->gtcfr2;
+	timers[2].gtmdr = &regs->gtmdr3;
+	timers[2].gtcnr = &regs->gtcnr3;
+	timers[2].gtrfr = &regs->gtrfr3;
+	timers[2].gtevr = &regs->gtevr3;
+
+	timers[3].gtcfr = &regs->gtcfr2;
+	timers[3].gtmdr = &regs->gtmdr4;
+	timers[3].gtcnr = &regs->gtcnr4;
+	timers[3].gtrfr = &regs->gtrfr4;
+	timers[3].gtevr = &regs->gtevr4;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!of_device_is_compatible(np, "fsl,cpm2-gtm")) {
+		timers[0].gtpsr = &regs->gtpsr1;
+		timers[1].gtpsr = &regs->gtpsr2;
+		timers[2].gtpsr = &regs->gtpsr3;
+		timers[3].gtpsr = &regs->gtpsr4;
+	}
+}
+
+static int __init fsl_gtm_init(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,gtm") {
+		int i;
+		struct gtm *gtm;
+		const u32 *clock;
+		int size;
+
+		gtm = kzalloc(sizeof(*gtm), GFP_KERNEL);
+		if (!gtm) {
+			pr_err("%s: unable to allocate memory\n",
+				np->full_name);
+			continue;
+		}
+
+		spin_lock_init(&gtm->lock);
+
+		clock = of_get_property(np, "clock-frequency", &size);
+		if (!clock || size != sizeof(*clock)) {
+			pr_err("%s: no clock-frequency\n", np->full_name);
+			goto err;
+		}
+		gtm->clock = *clock;
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			int ret;
+			struct resource irq;
+
+			ret = of_irq_to_resource(np, i, &irq);
+			if (ret == NO_IRQ) {
+				pr_err("%s: not enough interrupts specified\n",
+				       np->full_name);
+				goto err;
+			}
+			gtm->timers[i].irq = irq.start;
+			gtm->timers[i].gtm = gtm;
+		}
+
+		gtm->regs = of_iomap(np, 0);
+		if (!gtm->regs) {
+			pr_err("%s: unable to iomap registers\n",
+			       np->full_name);
+			goto err;
+		}
+
+		gtm_set_shortcuts(np, gtm->timers, gtm->regs);
+		list_add(&gtm->list_node, &gtms);
+
+		/* We don't want to lose the node and its ->data */
+		np->data = gtm;
+		of_node_get(np);
+
+		continue;
+err:
+		kfree(gtm);
+	}
+	return 0;
+}
+arch_initcall(fsl_gtm_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
new file mode 100644
index 000000000000..2c5187cc8a24
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * The hwirq alloc and free code reuse from sysdev/mpic_msi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/bitmap.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include "fsl_msi.h"
+
+struct fsl_msi_feature {
+	u32 fsl_pic_ip;
+	u32 msiir_offset;
+};
+
+static struct fsl_msi *fsl_msi;
+
+static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+/*
+ * We do not need this actually. The MSIR register has been read once
+ * in the cascade interrupt. So, this MSI interrupt has been acked
+*/
+static void fsl_msi_end_irq(unsigned int virq)
+{
+}
+
+static struct irq_chip fsl_msi_chip = {
+	.mask		= mask_msi_irq,
+	.unmask		= unmask_msi_irq,
+	.ack		= fsl_msi_end_irq,
+	.typename	= " FSL-MSI  ",
+};
+
+static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	struct irq_chip *chip = &fsl_msi_chip;
+
+	get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+
+	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
+
+	return 0;
+}
+
+static struct irq_host_ops fsl_msi_host_ops = {
+	.map = fsl_msi_host_map,
+};
+
+static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+	int offset;
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+
+	offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
+					NR_MSI_IRQS, order);
+
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+
+	pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	return offset;
+}
+
+static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+
+	pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+	bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+}
+
+static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
+{
+	int i;
+	int len;
+	const u32 *p;
+
+	bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
+		       get_count_order(NR_MSI_IRQS));
+
+	p = of_get_property(msi->of_node, "msi-available-ranges", &len);
+
+	if (!p) {
+		/* No msi-available-ranges property,
+		 * All the 256 MSI interrupts can be used
+		 */
+		fsl_msi_free_hwirqs(msi, 0, 0x100);
+		return 0;
+	}
+
+	if ((len % (2 * sizeof(u32))) != 0) {
+		printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
+		       "property on %s\n", msi->of_node->full_name);
+		return -EINVAL;
+	}
+
+	/* Format is: (<u32 start> <u32 count>)+ */
+	len /= 2 * sizeof(u32);
+	for (i = 0; i < len; i++, p += 2)
+		fsl_msi_free_hwirqs(msi, *p, *(p + 1));
+
+	return 0;
+}
+
+static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
+{
+	int rc;
+	int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
+
+	msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+
+	if (msi_data->fsl_msi_bitmap == NULL) {
+		pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	rc = fsl_msi_free_dt_hwirqs(msi_data);
+	if (rc)
+		goto out_free;
+
+	return 0;
+out_free:
+	kfree(msi_data->fsl_msi_bitmap);
+
+	msi_data->fsl_msi_bitmap = NULL;
+	return rc;
+
+}
+
+static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("fslmsi: MSI-X untested, trying anyway.\n");
+
+	return 0;
+}
+
+static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
+{
+	struct msi_desc *entry;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+		set_irq_msi(entry->irq, NULL);
+		fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+		irq_dispose_mapping(entry->irq);
+	}
+
+	return;
+}
+
+static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
+				  struct msi_msg *msg)
+{
+	struct fsl_msi *msi_data = fsl_msi;
+
+	msg->address_lo = msi_data->msi_addr_lo;
+	msg->address_hi = msi_data->msi_addr_hi;
+	msg->data = hwirq;
+
+	pr_debug("%s: allocated srs: %d, ibs: %d\n",
+		__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+}
+
+static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	irq_hw_number_t hwirq;
+	int rc;
+	unsigned int virq;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+		if (hwirq < 0) {
+			rc = hwirq;
+			pr_debug("%s: fail allocating msi interrupt\n",
+					__func__);
+			goto out_free;
+		}
+
+		virq = irq_create_mapping(msi_data->irqhost, hwirq);
+
+		if (virq == NO_IRQ) {
+			pr_debug("%s: fail mapping hwirq 0x%lx\n",
+					__func__, hwirq);
+			fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+			rc = -ENOSPC;
+			goto out_free;
+		}
+		set_irq_msi(virq, entry);
+
+		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		write_msi_msg(virq, &msg);
+	}
+	return 0;
+
+out_free:
+	return rc;
+}
+
+static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+	struct fsl_msi *msi_data = fsl_msi;
+	int msir_index = -1;
+	u32 msir_value = 0;
+	u32 intr_index;
+	u32 have_shift = 0;
+
+	spin_lock(&desc->lock);
+	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
+		if (desc->chip->mask_ack)
+			desc->chip->mask_ack(irq);
+		else {
+			desc->chip->mask(irq);
+			desc->chip->ack(irq);
+		}
+	}
+
+	if (unlikely(desc->status & IRQ_INPROGRESS))
+		goto unlock;
+
+	msir_index = (int)desc->handler_data;
+
+	if (msir_index >= NR_MSI_REG)
+		cascade_irq = NO_IRQ;
+
+	desc->status |= IRQ_INPROGRESS;
+	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs,
+			msir_index * 0x10);
+		break;
+	case FSL_PIC_IP_IPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
+		break;
+	}
+
+	while (msir_value) {
+		intr_index = ffs(msir_value) - 1;
+
+		cascade_irq = irq_linear_revmap(msi_data->irqhost,
+				msir_index * IRQS_PER_MSI_REG +
+					intr_index + have_shift);
+		if (cascade_irq != NO_IRQ)
+			generic_handle_irq(cascade_irq);
+		have_shift += intr_index + 1;
+		msir_value = msir_value >> (intr_index + 1);
+	}
+	desc->status &= ~IRQ_INPROGRESS;
+
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		desc->chip->eoi(irq);
+		break;
+	case FSL_PIC_IP_IPIC:
+		if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+			desc->chip->unmask(irq);
+		break;
+	}
+unlock:
+	spin_unlock(&desc->lock);
+}
+
+static int __devinit fsl_of_msi_probe(struct of_device *dev,
+				const struct of_device_id *match)
+{
+	struct fsl_msi *msi;
+	struct resource res;
+	int err, i, count;
+	int rc;
+	int virt_msir;
+	const u32 *p;
+	struct fsl_msi_feature *features = match->data;
+
+	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
+
+	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
+	if (!msi) {
+		dev_err(&dev->dev, "No memory for MSI structure\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	msi->of_node = of_node_get(dev->node);
+
+	msi->irqhost = irq_alloc_host(of_node_get(dev->node),
+				IRQ_HOST_MAP_LINEAR,
+				NR_MSI_IRQS, &fsl_msi_host_ops, 0);
+	if (msi->irqhost == NULL) {
+		dev_err(&dev->dev, "No memory for MSI irqhost\n");
+		of_node_put(dev->node);
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	/* Get the MSI reg base */
+	err = of_address_to_resource(dev->node, 0, &res);
+	if (err) {
+		dev_err(&dev->dev, "%s resource error!\n",
+				dev->node->full_name);
+		goto error_out;
+	}
+
+	msi->msi_regs = ioremap(res.start, res.end - res.start + 1);
+	if (!msi->msi_regs) {
+		dev_err(&dev->dev, "ioremap problem failed\n");
+		goto error_out;
+	}
+
+	msi->feature = features->fsl_pic_ip;
+
+	msi->irqhost->host_data = msi;
+
+	msi->msi_addr_hi = 0x0;
+	msi->msi_addr_lo = res.start + features->msiir_offset;
+
+	rc = fsl_msi_init_allocator(msi);
+	if (rc) {
+		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+		goto error_out;
+	}
+
+	p = of_get_property(dev->node, "interrupts", &count);
+	if (!p) {
+		dev_err(&dev->dev, "no interrupts property found on %s\n",
+				dev->node->full_name);
+		err = -ENODEV;
+		goto error_out;
+	}
+	if (count % 8 != 0) {
+		dev_err(&dev->dev, "Malformed interrupts property on %s\n",
+				dev->node->full_name);
+		err = -EINVAL;
+		goto error_out;
+	}
+
+	count /= sizeof(u32);
+	for (i = 0; i < count / 2; i++) {
+		if (i > NR_MSI_REG)
+			break;
+		virt_msir = irq_of_parse_and_map(dev->node, i);
+		if (virt_msir != NO_IRQ) {
+			set_irq_data(virt_msir, (void *)i);
+			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
+		}
+	}
+
+	fsl_msi = msi;
+
+	WARN_ON(ppc_md.setup_msi_irqs);
+	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+	ppc_md.msi_check_device = fsl_msi_check_device;
+	return 0;
+error_out:
+	kfree(msi);
+	return err;
+}
+
+static const struct fsl_msi_feature mpic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_MPIC,
+	.msiir_offset = 0x140,
+};
+
+static const struct fsl_msi_feature ipic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_IPIC,
+	.msiir_offset = 0x38,
+};
+
+static const struct of_device_id fsl_of_msi_ids[] = {
+	{
+		.compatible = "fsl,mpic-msi",
+		.data = (void *)&mpic_msi_feature,
+	},
+	{
+		.compatible = "fsl,ipic-msi",
+		.data = (void *)&ipic_msi_feature,
+	},
+	{}
+};
+
+static struct of_platform_driver fsl_of_msi_driver = {
+	.name = "fsl-msi",
+	.match_table = fsl_of_msi_ids,
+	.probe = fsl_of_msi_probe,
+};
+
+static __init int fsl_of_msi_init(void)
+{
+	return of_register_platform_driver(&fsl_of_msi_driver);
+}
+
+subsys_initcall(fsl_of_msi_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
new file mode 100644
index 000000000000..a653468521fa
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#ifndef _POWERPC_SYSDEV_FSL_MSI_H
+#define _POWERPC_SYSDEV_FSL_MSI_H
+
+#define NR_MSI_REG		8
+#define IRQS_PER_MSI_REG	32
+#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+
+#define FSL_PIC_IP_MASK	0x0000000F
+#define FSL_PIC_IP_MPIC	0x00000001
+#define FSL_PIC_IP_IPIC	0x00000002
+
+struct fsl_msi {
+	/* Device node of the MSI interrupt*/
+	struct device_node *of_node;
+
+	struct irq_host *irqhost;
+
+	unsigned long cascade_irq;
+
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	u32 feature;
+
+	unsigned long *fsl_msi_bitmap;
+	spinlock_t bitmap_lock;
+};
+
+#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
+
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index bf13c2174a4e..87b0aa13ab48 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -106,6 +106,16 @@ void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
+static void __init setup_pci_pcsrbar(struct pci_controller *hose)
+{
+#ifdef CONFIG_PCI_MSI
+	phys_addr_t immr_base;
+
+	immr_base = get_immrbase();
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
+#endif
+}
+
 static int fsl_pcie_bus_fixup;
 
 static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
@@ -211,6 +221,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
+	/* Setup PEXCSRBAR */
+	setup_pci_pcsrbar(hose);
 	return 0;
 }
 
@@ -231,6 +243,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 019657c110b6..ebcec7362f95 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -414,128 +414,6 @@ err:
 
 arch_initcall(gfar_of_init);
 
-#ifdef CONFIG_I2C_BOARDINFO
-#include <linux/i2c.h>
-struct i2c_driver_device {
-	char	*of_device;
-	char	*i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] __initdata = {
-	{"ricoh,rs5c372a", "rs5c372a"},
-	{"ricoh,rs5c372b", "rs5c372b"},
-	{"ricoh,rv5c386",  "rv5c386"},
-	{"ricoh,rv5c387a", "rv5c387a"},
-	{"dallas,ds1307",  "ds1307"},
-	{"dallas,ds1337",  "ds1337"},
-	{"dallas,ds1338",  "ds1338"},
-	{"dallas,ds1339",  "ds1339"},
-	{"dallas,ds1340",  "ds1340"},
-	{"stm,m41t00",     "m41t00"},
-	{"dallas,ds1374",  "ds1374"},
-};
-
-static int __init of_find_i2c_driver(struct device_node *node,
-				     struct i2c_board_info *info)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
-		if (!of_device_is_compatible(node, i2c_devices[i].of_device))
-			continue;
-		if (strlcpy(info->type, i2c_devices[i].i2c_type,
-			    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-			return -ENOMEM;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static void __init of_register_i2c_devices(struct device_node *adap_node,
-					   int bus_num)
-{
-	struct device_node *node = NULL;
-
-	while ((node = of_get_next_child(adap_node, node))) {
-		struct i2c_board_info info = {};
-		const u32 *addr;
-		int len;
-
-		addr = of_get_property(node, "reg", &len);
-		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
-			printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
-			continue;
-		}
-
-		info.irq = irq_of_parse_and_map(node, 0);
-		if (info.irq == NO_IRQ)
-			info.irq = -1;
-
-		if (of_find_i2c_driver(node, &info) < 0)
-			continue;
-
-		info.addr = *addr;
-
-		i2c_register_board_info(bus_num, &info, 1);
-	}
-}
-
-static int __init fsl_i2c_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i = 0;
-	struct platform_device *i2c_dev;
-	int ret;
-
-	for_each_compatible_node(np, NULL, "fsl-i2c") {
-		struct resource r[2];
-		struct fsl_i2c_platform_data i2c_data;
-		const unsigned char *flags = NULL;
-
-		memset(&r, 0, sizeof(r));
-		memset(&i2c_data, 0, sizeof(i2c_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
-		if (IS_ERR(i2c_dev)) {
-			ret = PTR_ERR(i2c_dev);
-			goto err;
-		}
-
-		i2c_data.device_flags = 0;
-		flags = of_get_property(np, "dfsrr", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
-		flags = of_get_property(np, "fsl5200-clocking", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
-
-		ret =
-		    platform_device_add_data(i2c_dev, &i2c_data,
-					     sizeof(struct
-						    fsl_i2c_platform_data));
-		if (ret)
-			goto unreg;
-
-		of_register_i2c_devices(np, i++);
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(i2c_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fsl_i2c_of_init);
-#endif
 
 #ifdef CONFIG_PPC_83xx
 static int __init mpc83xx_wdt_init(void)
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 216c0f5680d2..a96584ab33dd 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -276,7 +276,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
-	i8259_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				    0, &i8259_host_ops, 0);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index cfbd2aae93e8..7fd49c97501a 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -123,6 +123,12 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			(bus->number == hose->first_busno))
 		val &= 0xffffff00;
 
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
 	/*
 	 * Note: the caller has already checked that offset is
 	 * suitably aligned and that len is 1, 2 or 4.
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 0f2dfb0aaa6a..caba1c0be5a7 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -725,25 +725,21 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	struct resource res;
 	u32 temp = 0, ret;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return NULL;
+
 	ipic = alloc_bootmem(sizeof(struct ipic));
 	if (ipic == NULL)
 		return NULL;
 
 	memset(ipic, 0, sizeof(struct ipic));
 
-	ipic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
-	if (ipic->irqhost == NULL) {
-		of_node_put(node);
-		return NULL;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret) {
-		of_node_put(node);
+	if (ipic->irqhost == NULL)
 		return NULL;
-	}
 
 	ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6c90c95b454e..8e3478c995ef 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1016,13 +1016,11 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       isu_size, &mpic_host_ops,
 				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL) {
-		of_node_put(node);
+	if (mpic->irqhost == NULL)
 		return NULL;
-	}
 
 	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
@@ -1143,10 +1141,14 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
 	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
-	if (isu_size == 0)
-		mpic->num_sources =
-			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	if (isu_size == 0) {
+		if (flags & MPIC_BROKEN_FRR_NIRQS)
+			mpic->num_sources = mpic->irq_count;
+		else
+			mpic->num_sources =
+				((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+				 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	}
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index d272a52ecd24..de3e5e8bc324 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -16,6 +16,7 @@
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
 
+#include <sysdev/mpic.h>
 
 static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
 {
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 33cbfb22ce3e..68aff6076675 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -95,6 +95,7 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
+	int ret;
 
 	pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
 		 pdev, nvec, type);
@@ -108,8 +109,9 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		 * few MSIs for someone, but restrictions will apply to how the
 		 * sources can be changed independently.
 		 */
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+		hwirq = ret;
+		if (ret < 0) {
 			pr_debug("pasemi_msi: failed allocating hwirq\n");
 			return hwirq;
 		}
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 1d5a40899b74..6e2f8686fdfc 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -115,17 +115,19 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	u64 addr;
+	int ret;
 
 	addr = find_ht_magic_addr(pdev);
 	msg.address_lo = addr & 0xFFFFFFFF;
 	msg.address_hi = addr >> 32;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
+		if (ret < 0) {
 			pr_debug("u3msi: failed allocating hwirq\n");
-			return hwirq;
+			return ret;
 		}
+		hwirq = ret;
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index a132e0de8ca5..32e0ad0ebea8 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -15,6 +15,7 @@
 #include <linux/console.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 
@@ -25,6 +26,11 @@
  * PowerPC of_platform_bus_type.  They support platform_bus_type instead.
  */
 
+static struct of_device_id __initdata of_mv64x60_devices[] = {
+	{ .compatible = "marvell,mv64306-devctrl", },
+	{}
+};
+
 /*
  * Create MPSC platform devices
  */
@@ -484,6 +490,10 @@ static int __init mv64x60_device_setup(void)
 		of_node_put(np);
 	}
 
+	/* Now add every node that is on the device bus */
+	for_each_compatible_node(np, NULL, "marvell,mv64360")
+		of_platform_bus_probe(np, of_mv64x60_devices, NULL);
+
 	return 0;
 }
 arch_initcall(mv64x60_device_setup);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index b4a54c52e880..fb368dfde5d4 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -75,6 +75,11 @@ static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 	    !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
 		return;
 
+	if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
+		of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
+		hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+	}
+
 	/* Hide the PCI host BARs from the kernel as their content doesn't
 	 * fit well in the resource management
 	 */
@@ -1634,6 +1639,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 	port = &ppc4xx_pciex_ports[portno];
 	port->index = portno;
+
+	/*
+	 * Check if device is enabled
+	 */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
+		return;
+	}
+
 	port->node = of_node_get(np);
 	pval = of_get_property(np, "sdr-base", NULL);
 	if (pval == NULL) {
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index adc66212a419..4bb18f57901e 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -20,3 +20,16 @@ config UCC
 	bool
 	default y if UCC_FAST || UCC_SLOW
 
+config QE_USB
+	bool
+	help
+	  QE USB Host Controller support
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index 874fe1a5b1cf..f1855c185291 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
 obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
+obj-$(CONFIG_QE_USB)	+= usb.o
+obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
new file mode 100644
index 000000000000..8e5a0bc36d0b
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -0,0 +1,149 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+
+struct qe_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+	qe_gc->cpdata = in_be32(&regs->cpdata);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	return in_be32(&regs->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	if (val)
+		qe_gc->cpdata |= pin_mask;
+	else
+		qe_gc->cpdata &= ~pin_mask;
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	qe_gpio_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int __init qe_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+		int ret;
+		struct qe_gpio_chip *qe_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+		if (!qe_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&qe_gc->lock);
+
+		mm_gc = &qe_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		mm_gc->save_regs = qe_gpio_save_regs;
+		of_gc->gpio_cells = 2;
+		gc->ngpio = QE_PIO_PINS;
+		gc->direction_input = qe_gpio_dir_in;
+		gc->direction_output = qe_gpio_dir_out;
+		gc->get = qe_gpio_get;
+		gc->set = qe_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(qe_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cff550eec7e8..9e82d7e725a5 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -35,7 +35,6 @@
 #include <asm/rheap.h>
 
 static void qe_snums_init(void);
-static void qe_muram_init(void);
 static int qe_sdma_init(void);
 
 static DEFINE_SPINLOCK(qe_lock);
@@ -88,7 +87,7 @@ phys_addr_t get_qe_base(void)
 
 EXPORT_SYMBOL(get_qe_base);
 
-void qe_reset(void)
+void __init qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
@@ -325,97 +324,6 @@ static int qe_sdma_init(void)
 	return 0;
 }
 
-/*
- * muram_alloc / muram_free bits.
- */
-static DEFINE_SPINLOCK(qe_muram_lock);
-
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t qe_boot_muram_rh_block[16];
-static rh_info_t qe_muram_info;
-
-static void qe_muram_init(void)
-{
-	struct device_node *np;
-	const u32 *address;
-	u64 size;
-	unsigned int flags;
-
-	/* initialize the info header */
-	rh_init(&qe_muram_info, 1,
-		sizeof(qe_boot_muram_rh_block) /
-		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
-
-	/* Attach the usable muram area */
-	/* XXX: This is a subset of the available muram. It
-	 * varies with the processor and the microcode patches activated.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			WARN_ON(1);
-			return;
-		}
-	}
-
-	address = of_get_address(np, 0, &size, &flags);
-	WARN_ON(!address);
-
-	of_node_put(np);
-	if (address)
-		rh_attach_region(&qe_muram_info, *address, (int)size);
-}
-
-/* This function returns an index into the MURAM area.
- */
-unsigned long qe_muram_alloc(int size, int align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc);
-
-int qe_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	ret = rh_free(&qe_muram_info, offset);
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(qe_muram_free);
-
-/* not sure if this is ever needed */
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc_fixed);
-
-void qe_muram_dump(void)
-{
-	rh_dump(&qe_muram_info);
-}
-EXPORT_SYMBOL(qe_muram_dump);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index f59444d3be75..63cdf9887f36 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -329,21 +329,19 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	struct resource res;
 	u32 temp = 0, ret, high_active = 0;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
 	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
 	if (qe_ic == NULL)
 		return;
 
 	memset(qe_ic, 0, sizeof(struct qe_ic));
 
-	qe_ic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
-	if (qe_ic->irqhost == NULL) {
-		of_node_put(node);
-		return;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
+	if (qe_ic->irqhost == NULL)
 		return;
 
 	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 93916a48afec..7c87460179ef 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -28,21 +28,7 @@
 
 #undef DEBUG
 
-#define NUM_OF_PINS	32
-
-struct port_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-static struct port_regs __iomem *par_io;
+static struct qe_pio_regs __iomem *par_io;
 static int num_par_io_ports = 0;
 
 int par_io_init(struct device_node *np)
@@ -64,69 +50,79 @@ int par_io_init(struct device_node *np)
 	return 0;
 }
 
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		      int assignment, int has_irq)
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+			 int open_drain, int assignment, int has_irq)
 {
-	u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
-
-	if (!par_io)
-		return -1;
+	u32 pin_mask1bit;
+	u32 pin_mask2bits;
+	u32 new_mask2bits;
+	u32 tmp_val;
 
 	/* calculate pin location for single and 2 bits information */
-	pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
 
 	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io[port].cpodr);
+	tmp_val = in_be32(&par_io->cpodr);
 	if (open_drain)
-		out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
 	else
-		out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
 
 	/* define direction */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cpdir2) :
-		in_be32(&par_io[port].cpdir1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cpdir2) :
+		in_be32(&par_io->cpdir1);
 
 	/* get all bits mask for 2 bit per port */
-	pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* Get the final mask we need for the right definition */
-	new_mask2bits = (u32) (dir << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cpdir2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cpdir2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cpdir1,
+		out_be32(&par_io->cpdir1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
 	}
 	/* define pin assignment */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cppar2) :
-		in_be32(&par_io[port].cppar1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cppar2) :
+		in_be32(&par_io->cppar1);
 
-	new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
-			(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+			(pin % (QE_PIO_PINS / 2) + 1) * 2));
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cppar2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cppar2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cppar1,
+		out_be32(&par_io->cppar1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
 	}
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	if (!par_io || port >= num_par_io_ports)
+		return -EINVAL;
 
+	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+			    has_irq);
 	return 0;
 }
 EXPORT_SYMBOL(par_io_config_pin);
@@ -137,10 +133,10 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
 
 	if (port >= num_par_io_ports)
 		return -EINVAL;
-	if (pin >= NUM_OF_PINS)
+	if (pin >= QE_PIO_PINS)
 		return -EINVAL;
 	/* calculate pin location */
-	pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
 
 	tmp_val = in_be32(&par_io[port].cpdata);
 
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index 0e348d9af8a6..d3c7f5af9bc8 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -26,7 +26,8 @@
 #include <asm/qe.h>
 #include <asm/ucc.h>
 
-static DEFINE_SPINLOCK(ucc_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
 
 int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 {
@@ -35,10 +36,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 	if (ucc_num > UCC_MAX_NUM - 1)
 		return -EINVAL;
 
-	spin_lock_irqsave(&ucc_lock, flags);
+	spin_lock_irqsave(&cmxgcr_lock, flags);
 	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
 		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
-	spin_unlock_irqrestore(&ucc_lock, flags);
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
 
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
new file mode 100644
index 000000000000..8105462078eb
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/usb.c
@@ -0,0 +1,55 @@
+/*
+ * QE USB routines
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+	struct qe_mux __iomem *mux = &qe_immr->qmx;
+	unsigned long flags;
+	u32 val;
+
+	switch (clk) {
+	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
+	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
+	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
+	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
+	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
+	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+	default:
+		pr_err("%s: requested unknown clock %d\n", __func__, clk);
+		return -EINVAL;
+	}
+
+	if (qe_clock_is_brg(clk))
+		qe_setbrg(clk, rate, 1);
+
+	spin_lock_irqsave(&cmxgcr_lock, flags);
+
+	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index ac1a72dc21e5..24e1f5a197ae 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -426,11 +426,10 @@ void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-	pci_irq_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				      0, &pci_irq_host_ops, 0);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
-		of_node_put(node);
 		return;
 	}
 
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 625b275c3795..d35405c59434 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -280,12 +280,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 	}
 	uic->dcrbase = *dcrreg;
 
-	uic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	uic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				      NR_UIC_INTS, &uic_host_ops, -1);
-	if (! uic->irqhost) {
-		of_node_put(node);
+	if (! uic->irqhost)
 		return NULL; /* FIXME: panic? */
-	}
 
 	uic->irqhost->host_data = uic;
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index bfcf70ee8959..34c3d0688fe0 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -54,7 +54,7 @@
 #define skipbl	xmon_skipbl
 
 #ifdef CONFIG_SMP
-cpumask_t cpus_in_xmon = CPU_MASK_NONE;
+static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
 static unsigned long xmon_taken = 1;
 static int xmon_owner;
 static int xmon_gate;
@@ -154,7 +154,7 @@ static int do_spu_cmd(void);
 static void dump_tlb_44x(void);
 #endif
 
-int xmon_no_auto_backtrace;
+static int xmon_no_auto_backtrace;
 
 extern void xmon_enter(void);
 extern void xmon_leave(void);
@@ -327,6 +327,11 @@ static void release_output_lock(void)
 {
 	xmon_speaker = 0;
 }
+
+int cpus_are_in_xmon(void)
+{
+	return !cpus_empty(cpus_in_xmon);
+}
 #endif
 
 static int xmon_core(struct pt_regs *regs, int fromipi)
@@ -593,7 +598,7 @@ static int xmon_iabr_match(struct pt_regs *regs)
 {
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
 		return 0;
-	if (iabr == 0)
+	if (iabr == NULL)
 		return 0;
 	xmon_core(regs, 0);
 	return 1;
@@ -1142,7 +1147,7 @@ bpt_cmds(void)
 		} else {
 			/* assume a breakpoint address */
 			bp = at_breakpoint(a);
-			if (bp == 0) {
+			if (bp == NULL) {
 				printf("No breakpoint at %x\n", a);
 				break;
 			}
@@ -1370,7 +1375,7 @@ static void print_bug_trap(struct pt_regs *regs)
 #endif
 }
 
-void excprint(struct pt_regs *fp)
+static void excprint(struct pt_regs *fp)
 {
 	unsigned long trap;
 
@@ -1408,7 +1413,7 @@ void excprint(struct pt_regs *fp)
 		print_bug_trap(fp);
 }
 
-void prregs(struct pt_regs *fp)
+static void prregs(struct pt_regs *fp)
 {
 	int n, trap;
 	unsigned long base;
@@ -1463,7 +1468,7 @@ void prregs(struct pt_regs *fp)
 		printf("dar = "REG"   dsisr = %.8lx\n", fp->dar, fp->dsisr);
 }
 
-void cacheflush(void)
+static void cacheflush(void)
 {
 	int cmd;
 	unsigned long nflush;
@@ -1495,7 +1500,7 @@ void cacheflush(void)
 	catch_memory_errors = 0;
 }
 
-unsigned long
+static unsigned long
 read_spr(int n)
 {
 	unsigned int instrs[2];
@@ -1533,7 +1538,7 @@ read_spr(int n)
 	return ret;
 }
 
-void
+static void
 write_spr(int n, unsigned long val)
 {
 	unsigned int instrs[2];
@@ -1571,7 +1576,7 @@ static unsigned long regno;
 extern char exc_prolog;
 extern char dec_exc;
 
-void super_regs(void)
+static void super_regs(void)
 {
 	int cmd;
 	unsigned long val;
@@ -1629,7 +1634,7 @@ void super_regs(void)
 /*
  * Stuff for reading and writing memory safely
  */
-int
+static int
 mread(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1666,7 +1671,7 @@ mread(unsigned long adrs, void *buf, int size)
 	return n;
 }
 
-int
+static int
 mwrite(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1731,7 +1736,7 @@ static int handle_fault(struct pt_regs *regs)
 
 #define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
 
-void
+static void
 byterev(unsigned char *val, int size)
 {
 	int t;
@@ -1793,7 +1798,7 @@ static char *memex_subcmd_help_string =
     "  x        exit this mode\n"
     "";
 
-void
+static void
 memex(void)
 {
 	int cmd, inc, i, nslash;
@@ -1944,7 +1949,7 @@ memex(void)
 	}
 }
 
-int
+static int
 bsesc(void)
 {
 	int c;
@@ -1984,7 +1989,7 @@ static void xmon_rawdump (unsigned long adrs, long ndump)
 #define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
 			 || ('a' <= (c) && (c) <= 'f') \
 			 || ('A' <= (c) && (c) <= 'F'))
-void
+static void
 dump(void)
 {
 	int c;
@@ -2022,7 +2027,7 @@ dump(void)
 	}
 }
 
-void
+static void
 prdump(unsigned long adrs, long ndump)
 {
 	long n, m, c, r, nr;
@@ -2066,7 +2071,7 @@ prdump(unsigned long adrs, long ndump)
 
 typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
 
-int
+static int
 generic_inst_dump(unsigned long adr, long count, int praddr,
 			instruction_dump_func dump_func)
 {
@@ -2104,7 +2109,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
 	return adr - first_adr;
 }
 
-int
+static int
 ppc_inst_dump(unsigned long adr, long count, int praddr)
 {
 	return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
@@ -2126,7 +2131,7 @@ static unsigned long mval;		/* byte value to set memory to */
 static unsigned long mcount;		/* # bytes to affect */
 static unsigned long mdiffs;		/* max # differences to print */
 
-void
+static void
 memops(int cmd)
 {
 	scanhex((void *)&mdest);
@@ -2152,7 +2157,7 @@ memops(int cmd)
 	}
 }
 
-void
+static void
 memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 {
 	unsigned n, prt;
@@ -2170,7 +2175,7 @@ memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 static unsigned mend;
 static unsigned mask;
 
-void
+static void
 memlocate(void)
 {
 	unsigned a, n;
@@ -2203,7 +2208,7 @@ memlocate(void)
 static unsigned long mskip = 0x1000;
 static unsigned long mlim = 0xffffffff;
 
-void
+static void
 memzcan(void)
 {
 	unsigned char v;
@@ -2230,7 +2235,7 @@ memzcan(void)
 		printf("%.8x\n", a - mskip);
 }
 
-void proccall(void)
+static void proccall(void)
 {
 	unsigned long args[8];
 	unsigned long ret;
@@ -2388,7 +2393,7 @@ scanhex(unsigned long *vp)
 	return 1;
 }
 
-void
+static void
 scannl(void)
 {
 	int c;
@@ -2399,7 +2404,7 @@ scannl(void)
 		c = inchar();
 }
 
-int hexdigit(int c)
+static int hexdigit(int c)
 {
 	if( '0' <= c && c <= '9' )
 		return c - '0';
@@ -2430,13 +2435,13 @@ getstring(char *s, int size)
 static char line[256];
 static char *lineptr;
 
-void
+static void
 flush_input(void)
 {
 	lineptr = NULL;
 }
 
-int
+static int
 inchar(void)
 {
 	if (lineptr == NULL || *lineptr == 0) {
@@ -2449,7 +2454,7 @@ inchar(void)
 	return *lineptr++;
 }
 
-void
+static void
 take_input(char *str)
 {
 	lineptr = str;
@@ -2618,7 +2623,8 @@ static void dump_tlb_44x(void)
 	}
 }
 #endif /* CONFIG_44x */
-void xmon_init(int enable)
+
+static void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
diff --git a/arch/ppc/.gitignore b/arch/ppc/.gitignore
deleted file mode 100644
index 1e79a0ae4473..000000000000
--- a/arch/ppc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/include
diff --git a/arch/ppc/4xx_io/Makefile b/arch/ppc/4xx_io/Makefile
deleted file mode 100644
index 6a8cd575f382..000000000000
--- a/arch/ppc/4xx_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux MPC4xx ppc-specific parts
-#
-
-
-obj-$(CONFIG_SERIAL_SICC)		+= serial_sicc.o
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
deleted file mode 100644
index efa0a56e230b..000000000000
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/*
- *  Driver for IBM STB3xxx SICC serial port
- *
- *  Based on drivers/char/serial_amba.c, by ARM Ltd.
- *
- *  Copyright 2001 IBM Corp.
- *  Author: IBM China Research Lab
- *            Yudong Yang <yangyud@cn.ibm.com>
- *            Yi Ge       <geyi@cn.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
- * The driver support both as a console device and normal serial device and
- * is compatible with normal ttyS* devices.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/serial.h>
-
-
-#include <linux/serialP.h>
-
-
-/* -----------------------------------------------------------------------------
- *  From STB03xxx SICC UART Specification
- * -----------------------------------------------------------------------------
- *  UART Register Offsets.
- */
-
-#define BL_SICC_LSR   0x0000000      /* line status register read/clear */
-#define BL_SICC_LSRS  0x0000001      /* set line status register read/set */
-#define BL_SICC_HSR   0x0000002      /* handshake status register r/clear */
-#define BL_SICC_HSRS  0x0000003      /* set handshake status register r/set */
-#define BL_SICC_BRDH  0x0000004      /* baudrate divisor high reg r/w */
-#define BL_SICC_BRDL  0x0000005      /* baudrate divisor low reg r/w */
-#define BL_SICC_LCR   0x0000006      /* control register r/w */
-#define BL_SICC_RCR   0x0000007      /* receiver command register r/w */
-#define BL_SICC_TxCR  0x0000008      /* transmitter command register r/w */
-#define BL_SICC_RBR   0x0000009      /* receive buffer r */
-#define BL_SICC_TBR   0x0000009      /* transmit buffer w */
-#define BL_SICC_CTL2  0x000000A      /* added for Vesta */
-#define BL_SICC_IrCR  0x000000B      /* added for Vesta IR */
-
-/* masks and definitions for serial port control register */
-
-#define _LCR_LM_MASK  0xc0            /* loop back modes */
-#define _LCR_DTR_MASK 0x20            /* data terminal ready 0-inactive */
-#define _LCR_RTS_MASK 0x10            /* request to send 0-inactive */
-#define _LCR_DB_MASK  0x08            /* data bits mask */
-#define _LCR_PE_MASK  0x04            /* parity enable */
-#define _LCR_PTY_MASK 0x02            /* parity */
-#define _LCR_SB_MASK  0x01            /* stop bit mask */
-
-#define _LCR_LM_NORM  0x00            /* normal operation */
-#define _LCR_LM_LOOP  0x40            /* internal loopback mode */
-#define _LCR_LM_ECHO  0x80            /* automatic echo mode */
-#define _LCR_LM_RES   0xc0            /* reserved */
-
-#define _LCR_DTR_ACTIVE       _LCR_DTR_MASK /* DTR is active */
-#define _LCR_RTS_ACTIVE       _LCR_RTS_MASK /* RTS is active */
-#define _LCR_DB_8_BITS        _LCR_DB_MASK  /*  8 data bits */
-#define _LCR_DB_7_BITS        0x00          /*  7 data bits */
-#define _LCR_PE_ENABLE        _LCR_PE_MASK  /* parity enabled */
-#define _LCR_PE_DISABLE       0x00          /* parity disabled */
-#define _LCR_PTY_EVEN         0x00          /* even parity */
-#define _LCR_PTY_ODD          _LCR_PTY_MASK /* odd parity */
-#define _LCR_SB_1_BIT         0x00          /* one stop bit */
-#define _LCR_SB_2_BIT         _LCR_SB_MASK  /* two stop bit */
-
-/* serial port handshake register */
-
-#define _HSR_DIS_MASK  0x80            /* DSR input inactive error mask */
-#define _HSR_CS_MASK   0x40            /* CTS input inactive error mask */
-#define _HSR_DIS_ACT   0x00            /* dsr input is active */
-#define _HSR_DIS_INACT _HSR_DIS_MASK   /* dsr input is inactive */
-#define _HSR_CS_ACT    0x00            /* cts input is active */
-#define _HSR_CS_INACT  _HSR_CS_MASK    /* cts input is active */
-
-/* serial port line status register */
-
-#define _LSR_RBR_MASK  0x80            /* receive buffer ready mask */
-#define _LSR_FE_MASK   0x40            /* framing error */
-#define _LSR_OE_MASK   0x20            /* overrun error */
-#define _LSR_PE_MASK   0x10            /* parity error */
-#define _LSR_LB_MASK   0x08            /* line break */
-#define _LSR_TBR_MASK  0x04            /* transmit buffer ready */
-#define _LSR_TSR_MASK  0x02            /* transmit shift register ready */
-
-#define _LSR_RBR_FULL  _LSR_RBR_MASK  /* receive buffer is full */
-#define _LSR_FE_ERROR  _LSR_FE_MASK   /* framing error detected */
-#define _LSR_OE_ERROR  _LSR_OE_MASK   /* overrun error detected */
-#define _LSR_PE_ERROR  _LSR_PE_MASK   /* parity error detected */
-#define _LSR_LB_BREAK  _LSR_LB_MASK   /* line break detected */
-#define _LSR_TBR_EMPTY _LSR_TBR_MASK  /* transmit buffer is ready */
-#define _LSR_TSR_EMPTY _LSR_TSR_MASK  /* transmit shift register is empty */
-#define _LSR_TX_ALL    0x06           /* all physical transmit is done */
-
-#define _LSR_RX_ERR    (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
-			 _LSR_PE_MASK )
-
-/* serial port receiver command register */
-
-#define _RCR_ER_MASK   0x80           /* enable receiver mask */
-#define _RCR_DME_MASK  0x60           /* dma mode */
-#define _RCR_EIE_MASK  0x10           /* error interrupt enable mask */
-#define _RCR_PME_MASK  0x08           /* pause mode mask */
-
-#define _RCR_ER_ENABLE _RCR_ER_MASK   /* receiver enabled */
-#define _RCR_DME_DISABLE 0x00         /* dma disabled */
-#define _RCR_DME_RXRDY 0x20           /* dma disabled, RxRDY interrupt enabled*/
-#define _RCR_DME_ENABLE2 0x40         /* dma enabled,receiver src channel 2 */
-#define _RCR_DME_ENABLE3 0x60         /* dma enabled,receiver src channel 3 */
-#define _RCR_PME_HARD  _RCR_PME_MASK  /* RTS controlled by hardware */
-#define _RCR_PME_SOFT  0x00           /* RTS controlled by software */
-
-/* serial port transmit command register */
-
-#define _TxCR_ET_MASK   0x80           /* transmitter enable mask */
-#define _TxCR_DME_MASK  0x60           /* dma mode mask */
-#define _TxCR_TIE_MASK  0x10           /* empty interrupt enable mask */
-#define _TxCR_EIE_MASK  0x08           /* error interrupt enable mask */
-#define _TxCR_SPE_MASK  0x04           /* stop/pause mask */
-#define _TxCR_TB_MASK   0x02           /* transmit break mask */
-
-#define _TxCR_ET_ENABLE _TxCR_ET_MASK  /* transmitter enabled */
-#define _TxCR_DME_DISABLE 0x00         /* transmitter disabled, TBR intr disabled */
-#define _TxCR_DME_TBR   0x20           /* transmitter disabled, TBR intr enabled */
-#define _TxCR_DME_CHAN_2 0x40          /* dma enabled, destination chann 2 */
-#define _TxCR_DME_CHAN_3 0x60          /* dma enabled, destination chann 3 */
-
-/* serial ctl reg 2 - added for Vesta */
-
-#define _CTL2_EXTERN  0x80            /*  */
-#define _CTL2_USEFIFO 0x40            /*  */
-#define _CTL2_RESETRF 0x08            /*  */
-#define _CTL2_RESETTF 0x04            /*  */
-
-
-
-#define SERIAL_SICC_NAME    "ttySICC"
-#define SERIAL_SICC_MAJOR   150
-#define SERIAL_SICC_MINOR   1
-#define SERIAL_SICC_NR      1
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * Things needed by tty driver
- */
-static struct tty_driver *siccnormal_driver;
-
-#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-/*
- * Things needed internally to this driver
- */
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static u_char *tmp_buf;
-
-#define HIGH_BITS_OFFSET    ((sizeof(long)-sizeof(int))*8)
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS        256
-#define SICC_ISR_PASS_LIMIT 256
-
-#define EVT_WRITE_WAKEUP    0
-
-struct SICC_icount {
-    __u32   cts;
-    __u32   dsr;
-    __u32   rng;
-    __u32   dcd;
-    __u32   rx;
-    __u32   tx;
-    __u32   frame;
-    __u32   overrun;
-    __u32   parity;
-    __u32   brk;
-    __u32   buf_overrun;
-};
-
-/*
- * Static information about the port
- */
-struct SICC_port {
-    unsigned int        uart_base;
-    unsigned int        uart_base_phys;
-    unsigned int        irqrx;
-    unsigned int        irqtx;
-    unsigned int        uartclk;
-    unsigned int        fifosize;
-    unsigned int        tiocm_support;
-    void (*set_mctrl)(struct SICC_port *, u_int mctrl);
-};
-
-/*
- * This is the state information which is persistent across opens
- */
-struct SICC_state {
-    struct SICC_icount  icount;
-    unsigned int        line;
-    unsigned int        close_delay;
-    unsigned int        closing_wait;
-    unsigned int        custom_divisor;
-    unsigned int        flags;
-    int         count;
-    struct SICC_info    *info;
-    spinlock_t		sicc_lock;
-};
-
-#define SICC_XMIT_SIZE 1024
-/*
- * This is the state information which is only valid when the port is open.
- */
-struct SICC_info {
-    struct SICC_port    *port;
-    struct SICC_state   *state;
-    struct tty_struct   *tty;
-    unsigned char       x_char;
-    unsigned char       old_status;
-    unsigned char       read_status_mask;
-    unsigned char       ignore_status_mask;
-    struct circ_buf     xmit;
-    unsigned int        flags;
-#ifdef SUPPORT_SYSRQ
-    unsigned long       sysrq;
-#endif
-
-    unsigned int        event;
-    unsigned int        timeout;
-    unsigned int        lcr_h;
-    unsigned int        mctrl;
-    int         blocked_open;
-
-    struct tasklet_struct   tlet;
-
-    wait_queue_head_t   open_wait;
-    wait_queue_head_t   close_wait;
-    wait_queue_head_t   delta_msr_wait;
-};
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-static struct console siccuart_cons;
-#endif
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-
-static void powerpcMtcic_cr(unsigned long value)
-{
-    mtdcr(DCRN_CICCR, value);
-}
-
-static unsigned long powerpcMfcic_cr(void)
-{
-    return mfdcr(DCRN_CICCR);
-}
-
-static unsigned long powerpcMfclkgpcr(void)
-{
-    return mfdcr(DCRN_SCCR);
-}
-
-static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
-{
-}
-
-static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
-    {
-        .uart_base = 0,
-        .uart_base_phys = SICC0_IO_BASE,
-        .irqrx =    SICC0_INTRX,
-        .irqtx =    SICC0_INTTX,
-//      .uartclk =    0,
-        .fifosize = 1,
-        .set_mctrl = sicc_set_mctrl_null,
-    }
-};
-
-static struct SICC_state sicc_state[SERIAL_SICC_NR];
-
-static void siccuart_enable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |= _RCR_DME_RXRDY;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-static void siccuart_disable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |=  _RCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-
-static void siccuart_enable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |= _TxCR_DME_TBR;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-static void siccuart_disable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |=  _TxCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-
-static void siccuart_stop(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while stopping serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_disable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_start(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while starting serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (info->xmit.head != info->xmit.tail
-        && info->xmit.buf)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void siccuart_event(struct SICC_info *info, int event)
-{
-    info->event |= 1 << event;
-    tasklet_schedule(&info->tlet);
-}
-
-static void
-siccuart_rx_chars(struct SICC_info *info)
-{
-    struct tty_struct *tty = info->tty;
-    unsigned int status, ch, rsr, flg, ignored = 0;
-    struct SICC_icount *icount = &info->state->icount;
-    struct SICC_port *port = info->port;
-
-    status = readb(port->uart_base+BL_SICC_LSR );
-    while (status & _LSR_RBR_FULL) {
-        ch = readb(port->uart_base+BL_SICC_RBR);
-
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        icount->rx++;
-
-        flg = TTY_NORMAL;
-
-        /*
-         * Note that the error handling code is
-         * out of the main execution path
-         */
-        rsr = readb(port->uart_base+BL_SICC_LSR);
-        if (rsr & _LSR_RX_ERR)
-            goto handle_error;
-#ifdef SUPPORT_SYSRQ
-        if (info->sysrq) {
-            if (ch && time_before(jiffies, info->sysrq)) {
-                handle_sysrq(ch, NULL);
-                info->sysrq = 0;
-                goto ignore_char;
-            }
-            info->sysrq = 0;
-        }
-#endif
-    error_return:
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-    ignore_char:
-        status = readb(port->uart_base+BL_SICC_LSR );
-    }
-out:
-    tty_flip_buffer_push(tty);
-    return;
-
-handle_error:
-    if (rsr & _LSR_LB_BREAK) {
-        rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
-        icount->brk++;
-
-#ifdef SUPPORT_SYSRQ
-        if (info->state->line == siccuart_cons.index) {
-            if (!info->sysrq) {
-                info->sysrq = jiffies + HZ*5;
-                goto ignore_char;
-            }
-        }
-#endif
-    } else if (rsr & _LSR_PE_MASK)
-        icount->parity++;
-    else if (rsr & _LSR_FE_MASK)
-        icount->frame++;
-    if (rsr & _LSR_OE_MASK)
-        icount->overrun++;
-
-    if (rsr & info->ignore_status_mask) {
-        if (++ignored > 100)
-            goto out;
-        goto ignore_char;
-    }
-    rsr &= info->read_status_mask;
-
-    if (rsr & _LSR_LB_BREAK)
-        flg = TTY_BREAK;
-    else if (rsr &  _LSR_PE_MASK)
-        flg = TTY_PARITY;
-    else if (rsr &  _LSR_FE_MASK)
-        flg = TTY_FRAME;
-
-    if (rsr &  _LSR_OE_MASK) {
-        /*
-         * CHECK: does overrun affect the current character?
-         * ASSUMPTION: it does not.
-         */
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        ch = 0;
-        flg = TTY_OVERRUN;
-    }
-#ifdef SUPPORT_SYSRQ
-    info->sysrq = 0;
-#endif
-    goto error_return;
-}
-
-static void siccuart_tx_chars(struct SICC_info *info)
-{
-    struct SICC_port *port = info->port;
-    int count;
-        unsigned char status;
-
-
-    if (info->x_char) {
-        writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
-        info->state->icount.tx++;
-        info->x_char = 0;
-        return;
-    }
-    if (info->xmit.head == info->xmit.tail
-        || info->tty->stopped
-        || info->tty->hw_stopped) {
-        siccuart_disable_tx_interrupt(info);
-                writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
-        return;
-    }
-
-    count = port->fifosize;
-    do {
-        writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
-        info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
-        info->state->icount.tx++;
-        if (info->xmit.head == info->xmit.tail)
-            break;
-    } while (--count > 0);
-
-    if (CIRC_CNT(info->xmit.head,
-             info->xmit.tail,
-             SICC_XMIT_SIZE) < WAKEUP_CHARS)
-        siccuart_event(info, EVT_WRITE_WAKEUP);
-
-    if (info->xmit.head == info->xmit.tail) {
-        siccuart_disable_tx_interrupt(info);
-    }
-}
-
-
-static irqreturn_t siccuart_int_rx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_rx_chars(info)
-    return IRQ_HANDLED;
-}
-
-
-static irqreturn_t siccuart_int_tx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_tx_chars(info);
-    return IRQ_HANDLED;
-}
-
-static void siccuart_tasklet_action(unsigned long data)
-{
-    struct SICC_info *info = (struct SICC_info *)data;
-    struct tty_struct *tty;
-
-    tty = info->tty;
-    if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
-        return;
-
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-    wake_up_interruptible(&tty->write_wait);
-}
-
-static int siccuart_startup(struct SICC_info *info)
-{
-    unsigned long flags;
-    unsigned long page;
-    int retval = 0;
-
-    if (info->flags & ASYNC_INITIALIZED) {
-        return 0;
-    }
-
-    page = get_zeroed_page(GFP_KERNEL);
-    if (!page)
-        return -ENOMEM;
-
-    if (info->port->uart_base == 0)
-	info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
-    if (info->port->uart_base == 0) {
-	free_page(page);
-	return -ENOMEM;
-    }
-
-    /* lock access to info while doing setup */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (info->xmit.buf)
-        free_page(page);
-    else
-        info->xmit.buf = (unsigned char *) page;
-
-
-    info->mctrl = 0;
-    if (info->tty->termios->c_cflag & CBAUD)
-        info->mctrl = TIOCM_RTS | TIOCM_DTR;
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /*
-     * initialise the old status of the modem signals
-     */
-    info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
-
-
-    if (info->tty)
-        clear_bit(TTY_IO_ERROR, &info->tty->flags);
-    info->xmit.head = info->xmit.tail = 0;
-
-    /*
-     * Set up the tty->alt_speed kludge
-     */
-    if (info->tty) {
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-            info->tty->alt_speed = 57600;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-            info->tty->alt_speed = 115200;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-            info->tty->alt_speed = 230400;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-            info->tty->alt_speed = 460800;
-    }
-
-
-    writeb( 0x00, info->port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-
-    /*
-     * and set the speed of the serial port
-     */
-    siccuart_change_speed(info, 0);
-
-    // enable rx/tx ports
-    writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
-    writeb(_TxCR_ET_ENABLE               , info->port->uart_base + BL_SICC_TxCR);
-
-    readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
-
-    writeb(0xf8, info->port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /*
-     * Finally, enable interrupts
-     */
-
-     /*
-     * Allocate the IRQ
-     */
-        retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
-        if (retval) {
-             if (capable(CAP_SYS_ADMIN)) {
-                   if (info->tty)
-                          set_bit(TTY_IO_ERROR, &info->tty->flags);
-                   retval = 0;
-             }
-              goto errout;
-         }
-    retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
-    if (retval) {
-        if (capable(CAP_SYS_ADMIN)) {
-            if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
-            retval = 0;
-        }
-        free_irq(info->port->irqrx, info);
-        goto errout;
-    }
-
-    siccuart_enable_rx_interrupt(info);
-
-    info->flags |= ASYNC_INITIALIZED;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-
-
-errout:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void siccuart_shutdown(struct SICC_info *info)
-{
-    unsigned long flags;
-
-    if (!(info->flags & ASYNC_INITIALIZED))
-        return;
-
-    /* lock while shutting down port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
-
-    /*
-     * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
-     * here so the queue might never be woken up
-     */
-    wake_up_interruptible(&info->delta_msr_wait);
-
-    /*
-     * disable all interrupts, disable the port
-     */
-    siccuart_disable_rx_interrupt(info);
-    siccuart_disable_tx_interrupt(info);
-
-    /*
-     * Free the IRQ
-     */
-    free_irq(info->port->irqtx, info);
-    free_irq(info->port->irqrx, info);
-
-    if (info->xmit.buf) {
-        unsigned long pg = (unsigned long) info->xmit.buf;
-        info->xmit.buf = NULL;
-        free_page(pg);
-    }
-
-
-    if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-        info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /* kill off our tasklet */
-    tasklet_kill(&info->tlet);
-    if (info->tty)
-        set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-    info->flags &= ~ASYNC_INITIALIZED;
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
-{
-    unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
-    unsigned long flags;
-
-    if (!info->tty || !info->tty->termios)
-        return;
-
-    cflag = info->tty->termios->c_cflag;
-
-    pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
-    /* byte size and parity */
-    switch (cflag & CSIZE) {
-    case CS7: lcr_h =   _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9;  break;
-    default:  lcr_h =   _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
-    }
-    if (cflag & CSTOPB) {
-        lcr_h |= _LCR_SB_2_BIT;
-        bits ++;
-    }
-    if (cflag & PARENB) {
-        lcr_h |=  _LCR_PE_ENABLE;
-        bits++;
-        if (!(cflag & PARODD))
-            lcr_h |=  _LCR_PTY_ODD;
-        else
-            lcr_h |=  _LCR_PTY_EVEN;
-    }
-
-    do {
-        /* Determine divisor based on baud rate */
-        baud = tty_get_baud_rate(info->tty);
-        if (!baud)
-            baud = 9600;
-
-
-        {
-           // here is ppc403SetBaud(com_port, baud);
-           unsigned long divisor, clockSource, temp;
-
-           /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-           powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-           /* Determine Internal Baud Clock Frequency */
-           /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-           /* SCCR (Serial Clock Control Register) on Vesta */
-           temp = powerpcMfclkgpcr();
-
-           if(temp & 0x00000080) {
-               clockSource = 324000000;
-           }
-           else {
-               clockSource = 216000000;
-           }
-           clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-           divisor = clockSource/(16*baud) - 1;
-           /* divisor has only 12 bits of resolution */
-           if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-           }
-
-           quot = divisor;
-        }
-
-        if (baud == 38400 &&
-            ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-            quot = info->state->custom_divisor;
-
-        if (!quot && old_termios) {
-            info->tty->termios->c_cflag &= ~CBAUD;
-            info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-            old_termios = NULL;
-        }
-    } while (quot == 0 && old_termios);
-
-    /* As a last resort, if the quotient is zero, default to 9600 bps */
-    if (!quot)
-        quot = (info->port->uartclk / (16 * 9600)) - 1;
-
-    info->timeout = info->port->fifosize * HZ * bits / baud;
-    info->timeout += HZ/50;     /* Add .02 seconds of slop */
-
-    if (cflag & CRTSCTS)
-        info->flags |= ASYNC_CTS_FLOW;
-    else
-        info->flags &= ~ASYNC_CTS_FLOW;
-    if (cflag & CLOCAL)
-        info->flags &= ~ASYNC_CHECK_CD;
-    else
-        info->flags |= ASYNC_CHECK_CD;
-
-    /*
-     * Set up parity check flag
-     */
-#define RELEVENT_IFLAG(iflag)   ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-    info->read_status_mask = _LSR_OE_MASK;
-    if (I_INPCK(info->tty))
-        info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
-        info->read_status_mask |= _LSR_LB_MASK;
-
-    /*
-     * Characters to ignore
-     */
-    info->ignore_status_mask = 0;
-    if (I_IGNPAR(info->tty))
-        info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_IGNBRK(info->tty)) {
-        info->ignore_status_mask |=  _LSR_LB_MASK;
-        /*
-         * If we're ignoring parity and break indicators,
-         * ignore overruns to (for real raw support).
-         */
-        if (I_IGNPAR(info->tty))
-            info->ignore_status_mask |=  _LSR_OE_MASK;
-    }
-
-    /* disable interrupts while reading and clearing registers */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
-    old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
-
-
-    writeb(0, info->port->uart_base + BL_SICC_RCR);
-    writeb(0, info->port->uart_base + BL_SICC_TxCR);
-
-    /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
-
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-
-
-    /* Set baud rate */
-    writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      info->port->uart_base + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
-
-    writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
-
-    writeb(old_rcr, info->port->uart_base + BL_SICC_RCR);  // restore rcr
-    writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
-
-}
-
-
-static void siccuart_put_char(struct tty_struct *tty, u_char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (!tty || !info->xmit.buf)
-        return;
-
-    /* lock info->xmit while adding character to tx buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
-        info->xmit.buf[info->xmit.head] = ch;
-        info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_flush_chars(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (info->xmit.head == info->xmit.tail
-        || tty->stopped
-        || tty->hw_stopped
-        || !info->xmit.buf)
-        return;
-
-    /* disable interrupts while transmitting characters */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_write(struct tty_struct *tty,
-              const u_char * buf, int count)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    int c, ret = 0;
-
-    if (!tty || !info->xmit.buf || !tmp_buf)
-        return 0;
-
-    /* lock info->xmit while removing characters from buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    while (1) {
-        c = CIRC_SPACE_TO_END(info->xmit.head,
-                      info->xmit.tail,
-                      SICC_XMIT_SIZE);
-        if (count < c)
-            c = count;
-        if (c <= 0)
-            break;
-        memcpy(info->xmit.buf + info->xmit.head, buf, c);
-        info->xmit.head = (info->xmit.head + c) &
-                  (SICC_XMIT_SIZE - 1);
-        buf += c;
-        count -= c;
-        ret += c;
-    }
-    if (info->xmit.head != info->xmit.tail
-        && !tty->stopped
-        && !tty->hw_stopped)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return ret;
-}
-
-static int siccuart_write_room(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static int siccuart_chars_in_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static void siccuart_flush_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
-    /* lock info->xmit while zeroing buffer counts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    info->xmit.head = info->xmit.tail = 0;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    wake_up_interruptible(&tty->write_wait);
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void siccuart_send_xchar(struct tty_struct *tty, char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    info->x_char = ch;
-    if (ch)
-       siccuart_enable_tx_interrupt(info);
-}
-
-static void siccuart_throttle(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty))
-        siccuart_send_xchar(tty, STOP_CHAR(tty));
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static void siccuart_unthrottle(struct tty_struct *tty)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty)) {
-        if (info->x_char)
-            info->x_char = 0;
-        else
-            siccuart_send_xchar(tty, START_CHAR(tty));
-    }
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
-{
-    struct SICC_state *state = info->state;
-    struct SICC_port *port = info->port;
-    struct serial_struct tmp;
-
-    memset(&tmp, 0, sizeof(tmp));
-    tmp.type       = 0;
-    tmp.line       = state->line;
-    tmp.port       = port->uart_base;
-    if (HIGH_BITS_OFFSET)
-        tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
-    tmp.irq        = port->irqrx;
-    tmp.flags      = 0;
-    tmp.xmit_fifo_size = port->fifosize;
-    tmp.baud_base      = port->uartclk / 16;
-    tmp.close_delay    = state->close_delay;
-    tmp.closing_wait   = state->closing_wait;
-    tmp.custom_divisor = state->custom_divisor;
-
-    if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-        return -EFAULT;
-    return 0;
-}
-
-static int set_serial_info(struct SICC_info *info,
-               struct serial_struct *newinfo)
-{
-    struct serial_struct new_serial;
-    struct SICC_state *state, old_state;
-    struct SICC_port *port;
-    unsigned long new_port;
-    unsigned int i, change_irq, change_port;
-    int retval = 0;
-
-    if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
-        return -EFAULT;
-
-    state = info->state;
-    old_state = *state;
-    port = info->port;
-
-    new_port = new_serial.port;
-    if (HIGH_BITS_OFFSET)
-        new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
-
-    change_irq  = new_serial.irq != port->irqrx;
-    change_port = new_port != port->uart_base;
-
-    if (!capable(CAP_SYS_ADMIN)) {
-        if (change_irq || change_port ||
-            (new_serial.baud_base != port->uartclk / 16) ||
-            (new_serial.close_delay != state->close_delay) ||
-            (new_serial.xmit_fifo_size != port->fifosize) ||
-            ((new_serial.flags & ~ASYNC_USR_MASK) !=
-             (state->flags & ~ASYNC_USR_MASK)))
-            return -EPERM;
-        state->flags = ((state->flags & ~ASYNC_USR_MASK) |
-                (new_serial.flags & ASYNC_USR_MASK));
-        info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-                   (new_serial.flags & ASYNC_USR_MASK));
-        state->custom_divisor = new_serial.custom_divisor;
-        goto check_and_exit;
-    }
-
-    if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
-        (new_serial.baud_base < 9600))
-        return -EINVAL;
-
-    if (new_serial.type && change_port) {
-        for (i = 0; i < SERIAL_SICC_NR; i++)
-            if ((port != sicc_ports + i) &&
-                sicc_ports[i].uart_base != new_port)
-                return -EADDRINUSE;
-    }
-
-    if ((change_port || change_irq) && (state->count > 1))
-        return -EBUSY;
-
-    /*
-     * OK, past this point, all the error checking has been done.
-     * At this point, we start making changes.....
-     */
-    port->uartclk = new_serial.baud_base * 16;
-    state->flags = ((state->flags & ~ASYNC_FLAGS) |
-            (new_serial.flags & ASYNC_FLAGS));
-    info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
-               (info->flags & ASYNC_INTERNAL_FLAGS));
-    state->custom_divisor = new_serial.custom_divisor;
-    state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
-    state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-    port->fifosize = new_serial.xmit_fifo_size;
-
-    if (change_port || change_irq) {
-        /*
-         * We need to shutdown the serial port at the old
-         * port/irq combination.
-         */
-        siccuart_shutdown(info);
-        port->irqrx = new_serial.irq;
-        port->uart_base = new_port;
-    }
-
-check_and_exit:
-    if (!port->uart_base)
-        return 0;
-    if (info->flags & ASYNC_INITIALIZED) {
-        if ((old_state.flags & ASYNC_SPD_MASK) !=
-            (state->flags & ASYNC_SPD_MASK) ||
-            (old_state.custom_divisor != state->custom_divisor)) {
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                info->tty->alt_speed = 57600;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                info->tty->alt_speed = 115200;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                info->tty->alt_speed = 230400;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                info->tty->alt_speed = 460800;
-            siccuart_change_speed(info, NULL);
-        }
-    } else
-        retval = siccuart_startup(info);
-    return retval;
-}
-
-
-/*
- * get_lsr_info - get line status register info
- */
-static int get_lsr_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result, status;
-    unsigned long flags;
-
-    /* disable interrupts while reading status from port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    status = readb(info->port->uart_base +  BL_SICC_LSR);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
-
-    /*
-     * If we're about to load something into the transmit
-     * register, we'll pretend the transmitter isn't empty to
-     * avoid a race condition (depending on when the transmit
-     * interrupt happens).
-     */
-    if (info->x_char ||
-        ((CIRC_CNT(info->xmit.head, info->xmit.tail,
-               SICC_XMIT_SIZE) > 0) &&
-         !info->tty->stopped && !info->tty->hw_stopped))
-        result &= TIOCSER_TEMT;
-
-    return put_user(result, value);
-}
-
-static int get_modem_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result = info->mctrl;
-
-    return put_user(result, value);
-}
-
-static int set_modem_info(struct SICC_info *info, unsigned int cmd,
-              unsigned int *value)
-{
-    unsigned int arg, old;
-    unsigned long flags;
-
-    if (get_user(arg, value))
-        return -EFAULT;
-
-    old = info->mctrl;
-    switch (cmd) {
-    case TIOCMBIS:
-        info->mctrl |= arg;
-        break;
-
-    case TIOCMBIC:
-        info->mctrl &= ~arg;
-        break;
-
-    case TIOCMSET:
-        info->mctrl = arg;
-        break;
-
-    default:
-        return -EINVAL;
-    }
-    /* disable interrupts while setting modem control lines */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (old != info->mctrl)
-        info->port->set_mctrl(info->port, info->mctrl);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-}
-
-static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int lcr_h;
-
-
-    /* disable interrupts while setting break state */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    lcr_h = readb(info->port + BL_SICC_LSR);
-    if (break_state == -1)
-        lcr_h |=  _LSR_LB_MASK;
-    else
-        lcr_h &= ~_LSR_LB_MASK;
-    writeb(lcr_h, info->port + BL_SICC_LSRS);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
-               unsigned int cmd, unsigned long arg)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_icount cnow;
-    struct serial_icounter_struct icount;
-    unsigned long flags;
-
-    if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-        (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-        (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
-        if (tty->flags & (1 << TTY_IO_ERROR))
-            return -EIO;
-    }
-
-    switch (cmd) {
-        case TIOCMGET:
-            return get_modem_info(info, (unsigned int *)arg);
-        case TIOCMBIS:
-        case TIOCMBIC:
-        case TIOCMSET:
-            return set_modem_info(info, cmd, (unsigned int *)arg);
-        case TIOCGSERIAL:
-            return get_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSSERIAL:
-            return set_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSERGETLSR: /* Get line status register */
-            return get_lsr_info(info, (unsigned int *)arg);
-        /*
-         * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-         * - mask passed in arg for lines of interest
-         *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-         * Caller should use TIOCGICOUNT to see which one it was
-         */
-        case TIOCMIWAIT:
-            return 0;
-        /*
-         * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-         * Return: write counters to the user passed counter struct
-         * NB: both 1->0 and 0->1 transitions are counted except for
-         *     RI where only 0->1 is counted.
-         */
-        case TIOCGICOUNT:
-            /* disable interrupts while getting interrupt count */
-            spin_lock_irqsave(&info->state->sicc_lock,flags);
-            cnow = info->state->icount;
-            spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-            icount.cts = cnow.cts;
-            icount.dsr = cnow.dsr;
-            icount.rng = cnow.rng;
-            icount.dcd = cnow.dcd;
-            icount.rx  = cnow.rx;
-            icount.tx  = cnow.tx;
-            icount.frame = cnow.frame;
-            icount.overrun = cnow.overrun;
-            icount.parity = cnow.parity;
-            icount.brk = cnow.brk;
-            icount.buf_overrun = cnow.buf_overrun;
-
-            return copy_to_user((void *)arg, &icount, sizeof(icount))
-                    ? -EFAULT : 0;
-
-        default:
-            return -ENOIOCTLCMD;
-    }
-    return 0;
-}
-
-static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int cflag = tty->termios->c_cflag;
-
-    if ((cflag ^ old_termios->c_cflag) == 0 &&
-        RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
-        return;
-
-    siccuart_change_speed(info, old_termios);
-
-    /* Handle transition to B0 status */
-    if ((old_termios->c_cflag & CBAUD) &&
-        !(cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle transition away from B0 status */
-    if (!(old_termios->c_cflag & CBAUD) &&
-        (cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_DTR;
-        if (!(cflag & CRTSCTS) ||
-            !test_bit(TTY_THROTTLED, &tty->flags))
-            info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle turning off CRTSCTS */
-    if ((old_termios->c_cflag & CRTSCTS) &&
-        !(cflag & CRTSCTS)) {
-        tty->hw_stopped = 0;
-        siccuart_start(tty);
-    }
-
-#if 0
-    /*
-     * No need to wake up processes in open wait, since they
-     * sample the CLOCAL flag once, and don't recheck it.
-     * XXX  It's not clear whether the current behavior is correct
-     * or not.  Hence, this may change.....
-     */
-    if (!(old_termios->c_cflag & CLOCAL) &&
-        (tty->termios->c_cflag & CLOCAL))
-        wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-static void siccuart_close(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state;
-    unsigned long flags;
-
-    if (!info)
-        return;
-
-    state = info->state;
-
-    //pr_debug("siccuart_close() called\n");
-
-    /* lock tty->driver_data while closing port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (tty_hung_up_p(filp)) {
-        goto quick_close;
-    }
-
-    if ((tty->count == 1) && (state->count != 1)) {
-        /*
-         * Uh, oh.  tty->count is 1, which means that the tty
-         * structure will be freed.  state->count should always
-         * be one in these conditions.  If it's greater than
-         * one, we've got real problems, since it means the
-         * serial port won't be shutdown.
-         */
-        printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
-        state->count = 1;
-    }
-    if (--state->count < 0) {
-        printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
-        state->count = 0;
-    }
-    if (state->count) {
-        goto quick_close;
-    }
-    info->flags |= ASYNC_CLOSING;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    /*
-     * Now we wait for the transmit buffer to clear; and we notify
-     * the line discipline to only process XON/XOFF characters.
-     */
-    tty->closing = 1;
-    if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-        tty_wait_until_sent(tty, info->state->closing_wait);
-    /*
-     * At this point, we stop accepting input.  To do this, we
-     * disable the receive line status interrupts.
-     */
-    if (info->flags & ASYNC_INITIALIZED) {
-        siccuart_disable_rx_interrupt(info);
-        /*
-         * Before we drop DTR, make sure the UART transmitter
-         * has completely drained; this is especially
-         * important if there is a transmit FIFO!
-         */
-        siccuart_wait_until_sent(tty, info->timeout);
-    }
-    siccuart_shutdown(info);
-    if (tty->driver->flush_buffer)
-        tty->driver->flush_buffer(tty);
-    if (tty->ldisc.flush_buffer)
-        tty->ldisc.flush_buffer(tty);
-    tty->closing = 0;
-    info->event = 0;
-    info->tty = NULL;
-    if (info->blocked_open) {
-        if (info->state->close_delay)
-            schedule_timeout_interruptible(info->state->close_delay);
-        wake_up_interruptible(&info->open_wait);
-    }
-    info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-    wake_up_interruptible(&info->close_wait);
-    return;
-
-quick_close:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return;
-}
-
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long char_time, expire;
-
-    if (info->port->fifosize == 0)
-        return;
-
-    /*
-     * Set the check interval to be 1/5 of the estimated time to
-     * send a single character, and make it at least 1.  The check
-     * interval should also be less than the timeout.
-     *
-     * Note: we have to use pretty tight timings here to satisfy
-     * the NIST-PCTS.
-     */
-    char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
-    char_time = char_time / 5;
-    if (char_time == 0)
-        char_time = 1;
-
-    // Crazy!!   sometimes the input arg 'timeout' can be negtive numbers  :-(
-    if (timeout >= 0 && timeout < char_time)
-        char_time = timeout;
-    /*
-     * If the transmitter hasn't cleared in twice the approximate
-     * amount of time to send the entire FIFO, it probably won't
-     * ever clear.  This assumes the UART isn't doing flow
-     * control, which is currently the case.  Hence, if it ever
-     * takes longer than info->timeout, this is probably due to a
-     * UART bug of some kind.  So, we clamp the timeout parameter at
-     * 2*info->timeout.
-     */
-    if (!timeout || timeout > 2 * info->timeout)
-        timeout = 2 * info->timeout;
-
-    expire = jiffies + timeout;
-    pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu  char_time=%lu...\n",
-           tty->index, jiffies,
-           expire, char_time);
-    while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
-        schedule_timeout_interruptible(char_time);
-        if (signal_pending(current))
-            break;
-        if (timeout && time_after(jiffies, expire))
-            break;
-    }
-    set_current_state(TASK_RUNNING);
-}
-
-static void siccuart_hangup(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state = info->state;
-
-    siccuart_flush_buffer(tty);
-    if (info->flags & ASYNC_CLOSING)
-        return;
-    siccuart_shutdown(info);
-    info->event = 0;
-    state->count = 0;
-    info->flags &= ~ASYNC_NORMAL_ACTIVE;
-    info->tty = NULL;
-    wake_up_interruptible(&info->open_wait);
-}
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-               struct SICC_info *info)
-{
-    DECLARE_WAITQUEUE(wait, current);
-    struct SICC_state *state = info->state;
-    unsigned long flags;
-    int do_clocal = 0, extra_count = 0, retval;
-
-    /*
-     * If the device is in the middle of being closed, then block
-     * until it's done, and then try again.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return (info->flags & ASYNC_HUP_NOTIFY) ?
-            -EAGAIN : -ERESTARTSYS;
-    }
-
-    /*
-     * If non-blocking mode is set, or the port is not enabled,
-     * then make the check up front and then exit.
-     */
-    if ((filp->f_flags & O_NONBLOCK) ||
-        (tty->flags & (1 << TTY_IO_ERROR))) {
-        info->flags |= ASYNC_NORMAL_ACTIVE;
-        return 0;
-    }
-
-    if (tty->termios->c_cflag & CLOCAL)
-	do_clocal = 1;
-
-    /*
-     * Block waiting for the carrier detect and the line to become
-     * free (i.e., not in use by the callout).  While we are in
-     * this loop, state->count is dropped by one, so that
-     * rs_close() knows when to free things.  We restore it upon
-     * exit, either normal or abnormal.
-     */
-    retval = 0;
-    add_wait_queue(&info->open_wait, &wait);
-    /* lock while decrementing state->count */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (!tty_hung_up_p(filp)) {
-        extra_count = 1;
-        state->count--;
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    info->blocked_open++;
-    while (1) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        if (tty->termios->c_cflag & CBAUD) {
-            info->mctrl = TIOCM_DTR | TIOCM_RTS;
-            info->port->set_mctrl(info->port, info->mctrl);
-        }
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-        set_current_state(TASK_INTERRUPTIBLE);
-        if (tty_hung_up_p(filp) ||
-            !(info->flags & ASYNC_INITIALIZED)) {
-            if (info->flags & ASYNC_HUP_NOTIFY)
-                retval = -EAGAIN;
-            else
-                retval = -ERESTARTSYS;
-            break;
-        }
-        if (!(info->flags & ASYNC_CLOSING) &&
-            (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
-            break;
-        if (signal_pending(current)) {
-            retval = -ERESTARTSYS;
-            break;
-        }
-        schedule();
-    }
-    set_current_state(TASK_RUNNING);
-    remove_wait_queue(&info->open_wait, &wait);
-    if (extra_count)
-        state->count++;
-    info->blocked_open--;
-    if (retval)
-        return retval;
-    info->flags |= ASYNC_NORMAL_ACTIVE;
-    return 0;
-}
-
-static struct SICC_info *siccuart_get(int line)
-{
-    struct SICC_info *info;
-    struct SICC_state *state = sicc_state + line;
-
-    state->count++;
-    if (state->info)
-        return state->info;
-    info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL);
-    if (info) {
-        init_waitqueue_head(&info->open_wait);
-        init_waitqueue_head(&info->close_wait);
-        init_waitqueue_head(&info->delta_msr_wait);
-        info->flags = state->flags;
-        info->state = state;
-        info->port  = sicc_ports + line;
-        tasklet_init(&info->tlet, siccuart_tasklet_action,
-                 (unsigned long)info);
-    }
-    if (state->info) {
-        kfree(info);
-        return state->info;
-    }
-    state->info = info;
-    return info;
-}
-
-static int siccuart_open(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info;
-    int retval, line = tty->index;
-
-
-    // is this a line that we've got?
-    if (line >= SERIAL_SICC_NR) {
-        return -ENODEV;
-    }
-
-    info = siccuart_get(line);
-    if (!info)
-        return -ENOMEM;
-
-    tty->driver_data = info;
-    info->tty = tty;
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-    /*
-     * Make sure we have the temporary buffer allocated
-     */
-    if (!tmp_buf) {
-        unsigned long page = get_zeroed_page(GFP_KERNEL);
-        if (tmp_buf)
-            free_page(page);
-        else if (!page) {
-            return -ENOMEM;
-        }
-        tmp_buf = (u_char *)page;
-    }
-
-    /*
-     * If the port is in the middle of closing, bail out now.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return -EAGAIN;
-    }
-
-    /*
-     * Start up the serial port
-     */
-    retval = siccuart_startup(info);
-    if (retval) {
-        return retval;
-    }
-
-    retval = block_til_ready(tty, filp, info);
-    if (retval) {
-        return retval;
-    }
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-    if (siccuart_cons.cflag && siccuart_cons.index == line) {
-        tty->termios->c_cflag = siccuart_cons.cflag;
-        siccuart_cons.cflag = 0;
-        siccuart_change_speed(info, NULL);
-    }
-#endif
-    return 0;
-}
-
-static const struct tty_operations sicc_ops = {
-	.open = siccuart_open,
-	.close = siccuart_close,
-	.write = siccuart_write,
-	.put_char = siccuart_put_char,
-	.flush_chars = siccuart_flush_chars,
-	.write_room = siccuart_write_room,
-	.chars_in_buffer = siccuart_chars_in_buffer,
-	.flush_buffer  = siccuart_flush_buffer,
-	.ioctl = siccuart_ioctl,
-	.throttle = siccuart_throttle,
-	.unthrottle = siccuart_unthrottle,
-	.send_xchar = siccuart_send_xchar,
-	.set_termios = siccuart_set_termios,
-	.stop = siccuart_stop,
-	.start = siccuart_start,
-	.hangup = siccuart_hangup,
-	.break_ctl = siccuart_break_ctl,
-	.wait_until_sent = siccuart_wait_until_sent,
-};
-
-int __init siccuart_init(void)
-{
-    int i;
-    siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
-    if (!siccnormal_driver)
-	return -ENOMEM;
-    printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
-    siccnormal_driver->driver_name = "serial_sicc";
-    siccnormal_driver->owner = THIS_MODULE;
-    siccnormal_driver->name = SERIAL_SICC_NAME;
-    siccnormal_driver->major = SERIAL_SICC_MAJOR;
-    siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
-    siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
-    siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
-    siccnormal_driver->init_termios = tty_std_termios;
-    siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-    siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-    tty_set_operations(siccnormal_driver, &sicc_ops);
-
-    if (tty_register_driver(siccnormal_driver))
-        panic("Couldn't register SICC serial driver\n");
-
-    for (i = 0; i < SERIAL_SICC_NR; i++) {
-        struct SICC_state *state = sicc_state + i;
-        state->line     = i;
-        state->close_delay  = msecs_to_jiffies(500);
-        state->closing_wait = 30 * HZ;
-	spin_lock_init(&state->sicc_lock);
-    }
-
-
-    return 0;
-}
-
-__initcall(siccuart_init);
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-/************** console driver *****************/
-
-/*
- * This code is currently never used; console->read is never called.
- * Therefore, although we have an implementation, we don't use it.
- * FIXME: the "const char *s" should be fixed to "char *s" some day.
- * (when the definition in include/linux/console.h is also fixed)
- */
-#ifdef used_and_not_const_char_pointer
-static int siccuart_console_read(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int status;
-    char *w;
-    int c;
-
-    pr_debug("siccuart_console_read() called\n");
-
-    c = 0;
-    w = s;
-    while (c < count) {
-        if(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL) {
-            *w++ = readb(port->uart_base +  BL_SICC_RBR);
-            c++;
-        } else {
-            // nothing more to get, return
-            return c;
-        }
-    }
-    // return the count
-    return c;
-}
-#endif
-
-/*
- *  Print a string to the serial port trying not to disturb
- *  any possible real use of the port...
- *
- *  The console_lock must be held when we get here.
- */
-static void siccuart_console_write(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int old_cr;
-    int i;
-
-    /*
-     *  First save the CR then disable the interrupts
-     */
-    old_cr = readb(port->uart_base +  BL_SICC_TxCR);
-    writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base +  BL_SICC_TxCR);
-
-    /*
-     *  Now, do each character
-     */
-    for (i = 0; i < count; i++) {
-        while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-        writeb(s[i], port->uart_base +  BL_SICC_TBR);
-        if (s[i] == '\n') {
-            while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-            writeb('\r', port->uart_base +  BL_SICC_TBR);
-        }
-    }
-
-    /*
-     *  Finally, wait for transmitter to become empty
-     *  and restore the TCR
-     */
-    while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-    writeb(old_cr, port->uart_base +  BL_SICC_TxCR);
-}
-
-/*
- *  Receive character from the serial port
- */
-static int siccuart_console_wait_key(struct console *co)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    int c;
-
-    while(!(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL));
-    c = readb(port->uart_base +  BL_SICC_RBR);
-    return c;
-}
-
-static struct tty_driver *siccuart_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return siccnormal_driver;
-}
-
-static int __init siccuart_console_setup(struct console *co, char *options)
-{
-    struct SICC_port *port;
-    int baud = 9600;
-    int bits = 8;
-    int parity = 'n';
-    u_int cflag = CREAD | HUPCL | CLOCAL;
-    u_int lcr_h, quot;
-
-
-    if (co->index >= SERIAL_SICC_NR)
-        co->index = 0;
-
-    port = &sicc_ports[co->index];
-
-    if (port->uart_base == 0)
-	port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
-
-    if (options) {
-        char *s = options;
-        baud = simple_strtoul(s, NULL, 10);
-        while (*s >= '0' && *s <= '9')
-            s++;
-        if (*s) parity = *s++;
-        if (*s) bits = *s - '0';
-    }
-
-    /*
-     *    Now construct a cflag setting.
-     */
-    switch (baud) {
-    case 1200:  cflag |= B1200;         break;
-    case 2400:  cflag |= B2400;         break;
-    case 4800:  cflag |= B4800;         break;
-    default:    cflag |= B9600;   baud = 9600;  break;
-    case 19200: cflag |= B19200;        break;
-    case 38400: cflag |= B38400;        break;
-    case 57600: cflag |= B57600;        break;
-    case 115200:    cflag |= B115200;       break;
-    }
-    switch (bits) {
-    case 7:   cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT;   break;
-    default:  cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT;   break;
-    }
-    switch (parity) {
-    case 'o':
-    case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD;   break;
-    case 'e':
-    case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE |  _LCR_PTY_ODD; break;
-    }
-
-    co->cflag = cflag;
-
-
-       {
-           // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
-           unsigned long divisor, clockSource, temp;
-           unsigned int rate = baud;
-
-          /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-          powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-          /* Determine Internal Baud Clock Frequency */
-          /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-          /* SCCR (Serial Clock Control Register) on Vesta */
-          temp = powerpcMfclkgpcr();
-
-          if(temp & 0x00000080) {
-              clockSource = 324000000;
-          }
-          else {
-              clockSource = 216000000;
-          }
-          clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-          divisor = clockSource/(16*rate) - 1;
-          /* divisor has only 12 bits of resolution */
-          if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-          }
-
-          quot = divisor;
-       }
-
-    writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      port->uart_base   + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, port->uart_base  + BL_SICC_CTL2);
-
-    writeb(lcr_h, port->uart_base + BL_SICC_LCR);
-    writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
-    writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
-
-    // writeb(, info->port->uart_base + BL_SICC_RCR );
-    /*
-     * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
-     * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
-     * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
-     * mode disabled.
-     */
-
-    writeb( 0x00, port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-    readb(port->uart_base + BL_SICC_RBR);
-
-    writeb(0xf8, port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /* we will enable the port as we need it */
-
-    return 0;
-}
-
-static struct console siccuart_cons =
-{
-    .name =     SERIAL_SICC_NAME,
-    .write =    siccuart_console_write,
-#ifdef used_and_not_const_char_pointer
-    .read =     siccuart_console_read,
-#endif
-    .device =   siccuart_console_device,
-    .wait_key = siccuart_console_wait_key,
-    .setup =    siccuart_console_setup,
-    .flags =    CON_PRINTBUFFER,
-    .index =    -1,
-};
-
-void __init sicc_console_init(void)
-{
-    register_console(&siccuart_cons);
-}
-
-#endif /* CONFIG_SERIAL_SICC_CONSOLE */
diff --git a/arch/ppc/8260_io/Kconfig b/arch/ppc/8260_io/Kconfig
deleted file mode 100644
index ea9651e2dd6a..000000000000
--- a/arch/ppc/8260_io/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# CPM2 Communication options
-#
-
-menu "CPM2 Options"
-	depends on CPM2
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-
-#
-#  CONFIG_FEC_ENET is only used to get netdevices to call our init
-#    function.  Any combination of FCC1,2,3 are supported.
-#
-config FEC_ENET
-	bool "FCC Ethernet"
-	depends on NET_ETHERNET
-
-config FCC1_ENET
-	bool "Ethernet on FCC1"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 1 to drive Ethernet (default).
-
-config FCC2_ENET
-	bool "Ethernet on FCC2"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 2 to drive Ethernet.
-
-config FCC3_ENET
-	bool "Ethernet on FCC3"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 3 to drive Ethernet.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-
-choice
-	prompt "Type of PHY"
-	depends on 8260 && USE_MDIO
-	default FCC_GENERIC_PHY
-
-config FCC_LXT970
-	bool "LXT970"
-
-config FCC_LXT971
-	bool "LXT971"
-
-config FCC_QS6612
-	bool "QS6612"
-
-config FCC_DM9131
-	bool "DM9131"
-
-config FCC_DM9161
-	bool "DM9161"
-
-config FCC_GENERIC_PHY
-	bool "Generic"
-endchoice
-endmenu
diff --git a/arch/ppc/8260_io/Makefile b/arch/ppc/8260_io/Makefile
deleted file mode 100644
index 971f292c5d48..000000000000
--- a/arch/ppc/8260_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of comm processor (v2)
-#
-
-obj-$(CONFIG_FEC_ENET)	+= fcc_enet.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c
deleted file mode 100644
index ec1defea9c1e..000000000000
--- a/arch/ppc/8260_io/enet.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8260.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software Inc. (source@mvista.com)
- *	2.3.99 Updates
- *
- * I copied this from the 8xx CPM Ethernet driver, so follow the
- * credits back through that.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/uaccess.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8260 CPM performs the Ethernet processing on an SCC.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static irqreturn_t scc_enet_interrupt(int irq, void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* These will be configurable for the SCC choice.
-*/
-#define CPM_ENET_BLOCK	CPM_CR_SCC1_SBLOCK
-#define CPM_ENET_PAGE	CPM_CR_SCC1_PAGE
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0
-#define SIU_INT_ENET	SIU_INT_SCC1
-
-/* These are both board and SCC dependent....
-*/
-#define PD_ENET_RXD	((uint)0x00000001)
-#define PD_ENET_TXD	((uint)0x00000002)
-#define PD_ENET_TENA	((uint)0x00000004)
-#define PC_ENET_RENA	((uint)0x00020000)
-#define PC_ENET_CLSN	((uint)0x00000004)
-#define PC_ENET_TXCLK	((uint)0x00000800)
-#define PC_ENET_RXCLK	((uint)0x00000400)
-#define CMX_CLK_ROUTE	((uint)0x25000000)
-#define CMX_CLK_MASK	((uint)0xff000000)
-
-/* Specific to a board.
-*/
-#define PC_EST8260_ENET_LOOPBACK	((uint)0x80000000)
-#define PC_EST8260_ENET_SQE		((uint)0x40000000)
-#define PC_EST8260_ENET_NOTFD		((uint)0x20000000)
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_full should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static irqreturn_t
-scc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-		    			CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("SCC ENET: BSY can't happen.\n");
-	}
-
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE,
-						CPM_ENET_BLOCK, 0,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, err;
-	uint dp_offset;
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	bd = (bd_t *)__res;
-
-	/* Create an Ethernet device instance.
-	*/
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&immap->im_dprambase[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&immap->im_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Configure port C and D pins for SCC Ethernet.  This
-	 * won't work for all SCC possibilities....it will be
-	 * board/port specific.
-	 */
-	io->iop_pparc |=
-		(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_pdirc &=
-		~(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc &=
-		~(PC_ENET_RENA | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc |= PC_ENET_CLSN;
-
-	io->iop_ppard |= (PD_ENET_RXD | PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird |= (PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird &= ~PD_ENET_RXD;
-	io->iop_psord |= PD_ENET_TXD;
-	io->iop_psord &= ~(PD_ENET_RXD | PD_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_scr &= ~CMX_CLK_MASK;
-	immap->im_cpmux.cmx_scr |= CMX_CLK_ROUTE;
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->sen_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	ep->sen_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	request_irq(SIU_INT_ENET, scc_enet_interrupt, 0, "enet", dev);
-	/* BUG: no check for failure */
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-	io->iop_pparc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_psorc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdirc |= (PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdatc &= ~(PC_EST8260_ENET_LOOPBACK | PC_EST8260_ENET_SQE);
-	io->iop_pdatc |= PC_EST8260_ENET_NOTFD;
-
-	dev->base_addr = (unsigned long)ep;
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk("%s: SCC ENET Version 0.1, ", dev->name);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
deleted file mode 100644
index d38b57e24cee..000000000000
--- a/arch/ppc/8260_io/fcc_enet.c
+++ /dev/null
@@ -1,2379 +0,0 @@
-/*
- * Fast Ethernet Controller (FCC) driver for Motorola MPC8260.
- * Copyright (c) 2000 MontaVista Software, Inc.   Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is a combination of the 8xx fec and
- * 8260 SCC Ethernet drivers.  This version has some additional
- * configuration options, which should probably be moved out of
- * here.  This driver currently works for the EST SBC8260,
- * SBS Diablo/BCM, Embedded Planet RPX6, TQM8260, and others.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.  Since this is a cache coherent processor and CPM,
- * I could also preallocate SKB's and use them directly on the interface.
- *
- * 2004-12	Leo Li (leoli@freescale.com)
- * - Rework the FCC clock configuration part, make it easier to configure.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/signal.h>
-
-/* We can't use the PHY interrupt if we aren't using MDIO. */
-#if !defined(CONFIG_USE_MDIO)
-#undef PHY_INTERRUPT
-#endif
-
-/* If we have a PHY interrupt, we will advertise both full-duplex and half-
- * duplex capabilities.  If we don't have a PHY interrupt, then we will only
- * advertise half-duplex capabilities.
- */
-#define MII_ADVERTISE_HALF	(ADVERTISE_100HALF | ADVERTISE_10HALF | \
-				 ADVERTISE_CSMA)
-#define MII_ADVERTISE_ALL	(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				 MII_ADVERTISE_HALF)
-#ifdef PHY_INTERRUPT
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_ALL
-#else
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_HALF
-#endif
-#include <asm/cpm2.h>
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs */
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define FCC_ENET_RX_PAGES	16
-#define FCC_ENET_RX_FRSIZE	2048
-#define FCC_ENET_RX_FRPPG	(PAGE_SIZE / FCC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FCC_ENET_RX_FRPPG * FCC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets.
- * size includes support for VLAN
- */
-#define PKT_MAXBUF_SIZE		1522
-#define PKT_MINBUF_SIZE		64
-
-/* Maximum input DMA size.  Must be a should(?) be a multiple of 4.
- * size includes support for VLAN
- */
-#define PKT_MAXDMA_SIZE		1524
-
-/* Maximum input buffer size.  Must be a multiple of 32.
-*/
-#define PKT_MAXBLR_SIZE		1536
-
-static int fcc_enet_open(struct net_device *dev);
-static int fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int fcc_enet_rx(struct net_device *dev);
-static irqreturn_t fcc_enet_interrupt(int irq, void *dev_id);
-static int fcc_enet_close(struct net_device *dev);
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev);
-/* static void set_multicast_list(struct net_device *dev); */
-static void fcc_restart(struct net_device *dev, int duplex);
-static void fcc_stop(struct net_device *dev);
-static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
-
-/* These will be configurable for the FCC choice.
- * Multiple ports can be configured.  There is little choice among the
- * I/O pins to the PHY, except the clocks.  We will need some board
- * dependent clock selection.
- * Why in the hell did I put these inside #ifdef's?  I dunno, maybe to
- * help show what pins are used for each device.
- */
-
-/* Since the CLK setting changes greatly from board to board, I changed
- * it to a easy way.  You just need to specify which CLK number to use.
- * Note that only limited choices can be make on each port.
- */
-
-/* FCC1 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK9-12 */
-#ifdef CONFIG_SBC82xx
-#define F1_RXCLK	9
-#define F1_TXCLK	10
-#else
-#define F1_RXCLK	12
-#define F1_TXCLK	11
-#endif
-
-/* FCC2 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F2_RXCLK	13
-#define F2_TXCLK	14
-
-/* FCC3 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F3_RXCLK	15
-#define F3_TXCLK	16
-
-/* Automatically generates register configurations */
-#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK	((uint)0xff000000)
-
-#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK	((uint)0x00ff0000)
-
-#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK	((uint)0x0000ff00)
-
-
-/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL		((uint)0x00000001)
-#define PA1_CRS		((uint)0x00000002)
-#define PA1_TXER	((uint)0x00000004)
-#define PA1_TXEN	((uint)0x00000008)
-#define PA1_RXDV	((uint)0x00000010)
-#define PA1_RXER	((uint)0x00000020)
-#define PA1_TXDAT	((uint)0x00003c00)
-#define PA1_RXDAT	((uint)0x0003c000)
-#define PA1_PSORA_BOUT	(PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA_BIN	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
-				PA1_RXDV | PA1_RXER)
-#define PA1_DIRA_BOUT	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA_BIN	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER	((uint)0x00000001)
-#define PB2_RXDV	((uint)0x00000002)
-#define PB2_TXEN	((uint)0x00000004)
-#define PB2_RXER	((uint)0x00000008)
-#define PB2_COL		((uint)0x00000010)
-#define PB2_CRS		((uint)0x00000020)
-#define PB2_TXDAT	((uint)0x000003c0)
-#define PB2_RXDAT	((uint)0x00003c00)
-#define PB2_PSORB_BOUT	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
-				PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB_BIN	(PB2_TXEN)
-#define PB2_DIRB_BOUT	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB_BIN	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV	((uint)0x00004000)
-#define PB3_RXER	((uint)0x00008000)
-#define PB3_TXER	((uint)0x00010000)
-#define PB3_TXEN	((uint)0x00020000)
-#define PB3_COL		((uint)0x00040000)
-#define PB3_CRS		((uint)0x00080000)
-#ifndef CONFIG_RPX8260
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	((uint)0x00000000)
-#else
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	0
-#endif
-#define PB3_RXDAT	((uint)0x00f00000)
-#define PB3_PSORB_BOUT	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
-				PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB_BIN	(0)
-#define PB3_DIRB_BOUT	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB_BIN	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
-
-#define PC3_PSORC_BOUT	(PC3_TXDAT)
-#define PC3_PSORC_BIN	(0)
-#define PC3_DIRC_BOUT	(0)
-#define PC3_DIRC_BIN	(PC3_TXDAT)
-
-
-/* MII status/control serial interface.
-*/
-#if defined(CONFIG_RPX8260)
-/* The EP8260 doesn't use Port C for MDIO */
-#define PC_MDIO		((uint)0x00000000)
-#define PC_MDCK		((uint)0x00000000)
-#elif defined(CONFIG_TQM8260)
-/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
-#define PC_MDIO		((uint)0x00000002)
-#define PC_MDCK		((uint)0x00000001)
-#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
-#define PC_MDIO		((uint)0x00400000)
-#define PC_MDCK		((uint)0x00200000)
-#else
-#define PC_MDIO		((uint)0x00000004)
-#define PC_MDCK		((uint)0x00000020)
-#endif
-
-#if defined(CONFIG_USE_MDIO) && (!defined(PC_MDIO) || !defined(PC_MDCK))
-#error "Must define PC_MDIO and PC_MDCK if using MDIO"
-#endif
-
-/* PHY addresses */
-/* default to dynamic config of phy addresses */
-#define FCC1_PHY_ADDR 0
-#ifdef CONFIG_PQ2FADS
-#define FCC2_PHY_ADDR 0
-#else
-#define FCC2_PHY_ADDR 2
-#endif
-#define FCC3_PHY_ADDR 3
-
-/* A table of information for supporting FCCs.  This does two things.
- * First, we know how many FCCs we have and they are always externally
- * numbered from zero.  Second, it holds control register and I/O
- * information that could be different among board designs.
- */
-typedef struct fcc_info {
-	uint	fc_fccnum;
-	uint	fc_phyaddr;
-	uint	fc_cpmblock;
-	uint	fc_cpmpage;
-	uint	fc_proff;
-	uint	fc_interrupt;
-	uint	fc_trxclocks;
-	uint	fc_clockroute;
-	uint	fc_clockmask;
-	uint	fc_mdio;
-	uint	fc_mdck;
-} fcc_info_t;
-
-static fcc_info_t fcc_ports[] = {
-#ifdef CONFIG_FCC1_ENET
-	{ 0, FCC1_PHY_ADDR, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, PROFF_FCC1, SIU_INT_FCC1,
-		(PC_F1RXCLK | PC_F1TXCLK), CMX1_CLK_ROUTE, CMX1_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC2_ENET
-	{ 1, FCC2_PHY_ADDR, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, PROFF_FCC2, SIU_INT_FCC2,
-		(PC_F2RXCLK | PC_F2TXCLK), CMX2_CLK_ROUTE, CMX2_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC3_ENET
-	{ 2, FCC3_PHY_ADDR, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, PROFF_FCC3, SIU_INT_FCC3,
-		(PC_F3RXCLK | PC_F3TXCLK), CMX3_CLK_ROUTE, CMX3_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-};
-
-/* The FCC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fcc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	volatile fcc_t	*fccp;
-	volatile fcc_enet_t	*ep;
-	struct	net_device_stats stats;
-	uint	tx_free;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	phy_info_t	*phy;
-	struct work_struct phy_relink;
-	struct work_struct phy_display_config;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-	fcc_info_t	*fip;
-};
-
-static void init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-	volatile cpm2_map_t *immap);
-static void init_fcc_startup(fcc_info_t *fip, struct net_device *dev);
-static void init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-	volatile cpm2_map_t *immap);
-static void init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-	volatile cpm2_map_t *immap);
-
-#ifdef	CONFIG_USE_MDIO
-static int	mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *));
-static uint	mii_send_receive(fcc_info_t *fip, uint cmd);
-static void	mii_do_cmd(struct net_device *dev, const phy_cmd_t *c);
-
-/* Make MII read/write commands for the FCC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | (((REG) & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | (((REG) & 0x1f) << 18) | \
-						((VAL) & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-
-static int
-fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (!cep->tx_free || (bdp->cbd_sc & BD_ENET_TX_READY)) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since the tx queue should be stopped.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags. */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it. */
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer. */
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	spin_lock_irq(&cep->lock);
-
-	/* Save skb pointer. */
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-#if 0
-	/* Errata says don't do this. */
-	cep->fccp->fcc_ftodr = 0x8000;
-#endif
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again. */
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (!--cep->tx_free)
-		netif_stop_queue(dev);
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-
-static void
-fcc_enet_timeout(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p tx_free %d cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_free,
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (cep->tx_free)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler. */
-static irqreturn_t
-fcc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->fccp->fcc_fcce;
-	cep->fccp->fcc_fcce = (int_events & cep->fccp->fcc_fccm);
-	must_restart = 0;
-
-#ifdef PHY_INTERRUPT
-	/* We have to be careful here to make sure that we aren't
-	 * interrupted by a PHY interrupt.
-	 */
-	disable_irq_nosync(PHY_INTERRUPT);
-#endif
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & FCC_ENET_RXF)
-		fcc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (FCC_ENET_TXE | FCC_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if (cep->tx_free == TX_RING_SIZE)
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit. */
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->tx_skbuff[cep->skb_dirty] = NULL;
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted. */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (!cep->tx_free++) {
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.  Also, To workaround 8260 device erratum
-		 * CPM37, we must disable and then re-enable the transmitter
-		 * following a Late Collision, Underrun, or Retry Limit error.
-		 */
-		cep->fccp->fcc_gfmr &= ~FCC_GFMR_ENT;
-		udelay(10); /* wait a few microseconds just on principle */
-		cep->fccp->fcc_gfmr |=  FCC_GFMR_ENT;
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(cep->fip->fc_cpmpage, cep->fip->fc_cpmblock,
-		    		0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.
-	 */
-	if (int_events & FCC_ENET_BSY) {
-		cep->fccp->fcc_fcce = FCC_ENET_BSY;
-		cep->stats.rx_dropped++;
-	}
-
-#ifdef PHY_INTERRUPT
-	enable_irq(PHY_INTERRUPT);
-#endif
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-fcc_enet_rx(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CL)	/* Late Collision */
-		cep->stats.rx_frame_errors++;
-
-	if (!(bdp->cbd_sc &
-	      (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR
-	       | BD_ENET_RX_OV | BD_ENET_RX_CL)))
-	{
-		/* Process the incoming frame. */
-		cep->stats.rx_packets++;
-
-		/* Remove the FCS from the packet length. */
-		pkt_len = bdp->cbd_datlen - 4;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need. */
-		skb = dev_alloc_skb(pkt_len);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer. */
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty. */
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry. */
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-fcc_enet_close(struct net_device *dev)
-{
-#ifdef	CONFIG_USE_MDIO
-	struct fcc_enet_private *fep = dev->priv;
-#endif
-
-	netif_stop_queue(dev);
-	fcc_stop(dev);
-#ifdef	CONFIG_USE_MDIO
-	if (fep->phy)
-		mii_do_cmd(dev, fep->phy->shutdown);
-#endif
-
-	return 0;
-}
-
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-#ifdef	CONFIG_USE_MDIO
-
-/* NOTE: Most of the following comes from the FEC driver for 860. The
- * overall structure of MII code has been retained (as it's proved stable
- * and well-tested), but actual transfer requests are processed "at once"
- * instead of being queued (there's no interrupt-driven MII transfer
- * mechanism, one has to toggle the data/clock bits manually).
- */
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fcc_enet_private *fep;
-	int		retval, tmp;
-
-	/* Add PHY address to register command. */
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	tmp = mii_send_receive(fep->fip, regval);
-	if (func)
-		func(tmp, dev);
-
-	return retval;
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & BMSR_LSTATUS)
-		s |= PHY_STAT_LINK;
-	if (mii_reg & BMSR_RFAULT)
-		s |= PHY_STAT_FAULT;
-	if (mii_reg & BMSR_ANEGCOMPLETE)
-		s |= PHY_STAT_ANC;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & BMCR_ANENABLE)
-		s |= PHY_CONF_ANE;
-	if (mii_reg & BMCR_LOOPBACK)
-		s |= PHY_CONF_LOOP;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & ADVERTISE_10HALF)
-		s |= PHY_CONF_10HDX;
-	if (mii_reg & ADVERTISE_10FULL)
-		s |= PHY_CONF_10FDX;
-	if (mii_reg & ADVERTISE_100HALF)
-		s |= PHY_CONF_100HDX;
-	if (mii_reg & ADVERTISE_100FULL)
-		s |= PHY_CONF_100FDX;
-
-	fep->phy_status = s;
-}
-
-/* ------------------------------------------------------------------------- */
-/* Generic PHY support.  Should work for all PHYs, but does not support link
- * change interrupts.
- */
-#ifdef CONFIG_FCC_GENERIC_PHY
-
-static phy_info_t phy_info_generic = {
-	0x00000000, /* 0-->match any PHY */
-	"GENERIC",
-
-	(const phy_cmd_t []) {  /* config */
-		/* advertise only half-duplex capabilities */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_HALF),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup */
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* We don't actually use the ack_int table with a generic
-		 * PHY, but putting a reference to mii_parse_sr here keeps
-		 * us from getting a compiler warning about unused static
-		 * functions in the case where we only compile in generic
-		 * PHY support.
-		 */
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown */
-		{ mk_mii_end, }
-	},
-};
-#endif	/* ifdef CONFIG_FCC_GENERIC_PHY */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FCC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_ADVERTISE, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FCC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		s |= PHY_STAT_FAULT;
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-		/* configure link capabilities to advertise */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_DEFAULT),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-		{ mk_mii_read(MII_BMSR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FCC_LXT971 */
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FCC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_100HDX; break;
-	case 5: s |= PHY_STAT_10FDX;  break;
-	case 6: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_ADVERTISE, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_QS6612 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Davicom DM9131 is used on the HYMOD board			     */
-
-#ifdef CONFIG_FCC_DM9131
-
-/* register definitions */
-
-#define MII_DM9131_ACR		16	/* Aux. Config Register		*/
-#define MII_DM9131_ACSR		17	/* Aux. Config/Status Register	*/
-#define MII_DM9131_10TCSR	18	/* 10BaseT Config/Status Reg.	*/
-#define MII_DM9131_INTR		21	/* Interrupt Register		*/
-#define MII_DM9131_RECR		22	/* Receive Error Counter Reg.	*/
-#define MII_DM9131_DISCR	23	/* Disconnect Counter Register	*/
-
-static void mii_parse_dm9131_acsr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch ((mii_reg >> 12) & 0xf) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_10FDX;  break;
-	case 4: s |= PHY_STAT_100HDX; break;
-	case 8: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_dm9131 = {
-	0x00181b80,
-	"DM9131",
-
-	(const phy_cmd_t []) {  /* config */
-		/* parse cr and anar to get some info */
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read INTR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_DM9131_INTR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read acsr to get info */
-
-		{ mk_mii_read(MII_DM9131_ACSR), mii_parse_dm9131_acsr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0f00), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_DM9131 */
-#ifdef CONFIG_FCC_DM9161
-/* ------------------------------------------------------------------------- */
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP     0x0400
-#define MIIM_DM9161_CR_RSTAN    0x1200
-
-#define MIIM_DM9161_SCR         0x10
-#define MIIM_DM9161_SCR_INIT    0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR        0x11
-#define MIIM_DM9161_SCSR_100F   0x8000
-#define MIIM_DM9161_SCSR_100H   0x4000
-#define MIIM_DM9161_SCSR_10F    0x2000
-#define MIIM_DM9161_SCSR_10H    0x1000
-/* DM9161 10BT register */
-#define MIIM_DM9161_10BTCSR 	0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-/* DM9161 Interrupt Register */
-#define MIIM_DM9161_INTR        0x15
-#define MIIM_DM9161_INTR_PEND           0x8000
-#define MIIM_DM9161_INTR_DPLX_MASK      0x0800
-#define MIIM_DM9161_INTR_SPD_MASK       0x0400
-#define MIIM_DM9161_INTR_LINK_MASK      0x0200
-#define MIIM_DM9161_INTR_MASK           0x0100
-#define MIIM_DM9161_INTR_DPLX_CHANGE    0x0010
-#define MIIM_DM9161_INTR_SPD_CHANGE     0x0008
-#define MIIM_DM9161_INTR_LINK_CHANGE    0x0004
-#define MIIM_DM9161_INTR_INIT           0x0000
-#define MIIM_DM9161_INTR_STOP   \
-(MIIM_DM9161_INTR_DPLX_MASK | MIIM_DM9161_INTR_SPD_MASK \
-  | MIIM_DM9161_INTR_LINK_MASK | MIIM_DM9161_INTR_MASK)
-
-static void mii_parse_dm9161_sr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint regstat,  timeout=0xffff;
-
-	while(!(mii_reg & 0x0020) && timeout--)
-	{
-		regstat=mk_mii_read(MII_BMSR);
-	        regstat |= fep->phy_addr <<23;
-	        mii_reg = mii_send_receive(fep->fip,regstat);
-	}
-
-	mii_parse_sr(mii_reg, dev);
-}
-
-static void mii_parse_dm9161_scsr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-	switch((mii_reg >>12) & 0xf) {
-		case 1:
-		{
-			s |= PHY_STAT_10HDX;
-			printk("10BaseT Half Duplex\n");
-			break;
-		}
-		case 2:
-		{
-			s |= PHY_STAT_10FDX;
-		        printk("10BaseT Full Duplex\n");
-			break;
-		}
-		case 4:
-	        {
-			s |= PHY_STAT_100HDX;
-		        printk("100BaseT Half Duplex\n");
-			break;
-		}
-		case 8:
-		{
-			s |= PHY_STAT_100FDX;
-			printk("100BaseT Full Duplex\n");
-			break;
-		}
-	}
-
-	fep->phy_status = s;
-
-}
-
-static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
-{
-	int timeout = HZ;
-
-	/* Davicom takes a bit to come up after a reset,
-	 * so wait here for a bit */
-	schedule_timeout_uninterruptible(timeout);
-}
-
-static phy_info_t phy_info_dm9161 = {
-        0x00181b88,
-        "Davicom DM9161E",
-        (const phy_cmd_t[]) { /* config */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_STOP), NULL},
-                /* Do not bypass the scrambler/descrambler */
-                { mk_mii_write(MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT), NULL},
-		/* Configure 10BTCSR register */
-		{ mk_mii_write(MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT),NULL},
-                /* Configure some basic stuff */
-                { mk_mii_write(MII_BMCR, 0x1000), NULL},
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* startup */
-                /* Restart Auto Negotiation */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_RSTAN), NULL},
-                /* Status is read once to clear old link state */
-                { mk_mii_read(MII_BMSR), mii_dm9161_wait},
-                /* Auto-negotiate */
-                { mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-                /* Read the status */
-                { mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-                /* Clear any pending interrupts */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-                /* Enable Interrupts */
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_INIT), NULL},
-                { mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* ack_int */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-#if 0
-		{ mk_mii_read(MII_BMSR), NULL},
-		{ mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-		{ mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-#endif
-                { mk_mii_end,}
-        },
-        (const phy_cmd_t[]) { /* shutdown */
-	        { mk_mii_read(MIIM_DM9161_INTR),NULL},
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_STOP), NULL},
-	        { mk_mii_end,}
-	},
-};
-#endif /* CONFIG_FCC_DM9161 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FCC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FCC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FCC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FCC_DM9131
-	&phy_info_dm9131,
-#endif /* CONFIG_FEC_DM9131 */
-
-#ifdef CONFIG_FCC_DM9161
-	&phy_info_dm9161,
-#endif /* CONFIG_FCC_DM9161 */
-
-#ifdef CONFIG_FCC_GENERIC_PHY
-	/* Generic PHY support.  This must be the last PHY in the table.
-	 * It will be used to support any PHY that doesn't match a previous
-	 * entry in the table.
-	 */
-	&phy_info_generic,
-#endif /* CONFIG_FCC_GENERIC_PHY */
-
-	NULL
-};
-
-static void mii_display_status(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private, phy_relink);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX:  printk(", 10 Mbps Full Duplex");  break;
-		case PHY_STAT_10HDX:  printk(", 10 Mbps Half Duplex");  break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private,
-			     phy_display_config);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-	int duplex = 0;
-
-	fep->old_link = fep->link;
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-
-#ifdef MDIO_DEBUG
-	printk("  mii_relink:  link=%d\n", fep->link);
-#endif
-
-	if (fep->link) {
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fcc_restart(dev, duplex);
-#ifdef MDIO_DEBUG
-		printk("  mii_relink:  duplex=%d\n", duplex);
-#endif
-	}
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	mii_relink(dev);
-
-	schedule_work(&fep->phy_relink);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	schedule_work(&fep->phy_display_config);
-}
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_BMCR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_BMCR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	printk("mii_reg: %08x\n", mii_reg);
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if((phy_info[i]->id == (fep->phy_id >> 4)) || !phy_info[i]->id)
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder. */
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_PHYSID2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_PHYSID1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef PHY_INTERRUPT
-/* This interrupt occurs when the PHY detects a link change. */
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id)
-{
-	struct	net_device *dev = dev_id;
-	struct fcc_enet_private *fep = dev->priv;
-	fcc_info_t *fip = fep->fip;
-
-	if (fep->phy) {
-		/* We don't want to be interrupted by an FCC
-		 * interrupt here.
-		 */
-		disable_irq_nosync(fip->fc_interrupt);
-
-		mii_do_cmd(dev, fep->phy->ack_int);
-		/* restart and display status */
-		mii_do_cmd(dev, phy_cmd_relink);
-
-		enable_irq(fip->fc_interrupt);
-	}
-	return IRQ_HANDLED;
-}
-#endif	/* ifdef PHY_INTERRUPT */
-
-#if 0 /* This should be fixed someday */
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile fcc_enet_t *ep;
-	int	i, j;
-
-	cep = (struct fcc_enet_private *)dev->priv;
-
-return;
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->fccp->fcc_fpsmr |= FCC_PSMR_PRO;
-	} else {
-
-		cep->fccp->fcc_fpsmr &= ~FCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fen_gaddrh = 0xffffffff;
-			ep->fen_gaddrl = 0xffffffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->fen_gaddrh = 0;
-			ep->fen_gaddrl = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++, dmi = dmi->next) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->fen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(cep->fip->fc_cpmpage,
-						cep->fip->fc_cpmblock, 0x0c,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-#endif /* if 0 */
-
-
-/* Set the individual MAC address.
- */
-int fcc_enet_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr= (struct sockaddr *) p;
-	struct fcc_enet_private *cep;
-	volatile fcc_enet_t *ep;
-	unsigned char *eap;
-	int i;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-
-        if (netif_running(dev))
-                return -EBUSY;
-
-        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	eap = (unsigned char *) &(ep->fen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = addr->sa_data[i];
-
-        return 0;
-}
-
-
-/* Initialize the CPM Ethernet on FCC.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fcc_enet_private *cep;
-	fcc_info_t	*fip;
-	int	i, np, err;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	np = sizeof(fcc_ports) / sizeof(fcc_info_t);
-	fip = fcc_ports;
-
-	while (np-- > 0) {
-		/* Create an Ethernet device instance.
-		*/
-		dev = alloc_etherdev(sizeof(*cep));
-		if (!dev)
-			return -ENOMEM;
-
-		cep = dev->priv;
-		spin_lock_init(&cep->lock);
-		cep->fip = fip;
-
-		init_fcc_shutdown(fip, cep, immap);
-		init_fcc_ioports(fip, io, immap);
-		init_fcc_param(fip, dev, immap);
-
-		dev->base_addr = (unsigned long)(cep->ep);
-
-		/* The CPM Ethernet specific entries in the device
-		 * structure.
-		 */
-		dev->open = fcc_enet_open;
-		dev->hard_start_xmit = fcc_enet_start_xmit;
-		dev->tx_timeout = fcc_enet_timeout;
-		dev->watchdog_timeo = TX_TIMEOUT;
-		dev->stop = fcc_enet_close;
-		dev->get_stats = fcc_enet_get_stats;
-		/* dev->set_multicast_list = set_multicast_list; */
-		dev->set_mac_address = fcc_enet_set_mac_address;
-
-		init_fcc_startup(fip, dev);
-
-		err = register_netdev(dev);
-		if (err) {
-			free_netdev(dev);
-			return err;
-		}
-
-		printk("%s: FCC ENET Version 0.3, ", dev->name);
-		for (i=0; i<5; i++)
-			printk("%02x:", dev->dev_addr[i]);
-		printk("%02x\n", dev->dev_addr[5]);
-
-#ifdef	CONFIG_USE_MDIO
-		/* Queue up command to detect the PHY and initialize the
-	 	* remainder of the interface.
-	 	*/
-		cep->phy_id_done = 0;
-		cep->phy_addr = fip->fc_phyaddr;
-		mii_queue(dev, mk_mii_read(MII_PHYSID1), mii_discover_phy);
-		INIT_WORK(&cep->phy_relink, mii_display_status);
-		INIT_WORK(&cep->phy_display_config, mii_display_config);
-		cep->dev = dev;
-#endif	/* CONFIG_USE_MDIO */
-
-		fip++;
-	}
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* Make sure the device is shut down during initialization.
-*/
-static void __init
-init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-						volatile cpm2_map_t *immap)
-{
-	volatile	fcc_enet_t	*ep;
-	volatile	fcc_t		*fccp;
-
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)(&immap->im_dprambase[fip->fc_proff]);
-
-	/* And another to the FCC register area.
-	*/
-	fccp = (volatile fcc_t *)(&immap->im_fcc[fip->fc_fccnum]);
-	cep->fccp = fccp;		/* Keep the pointers handy */
-	cep->ep = ep;
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-}
-
-/* Initialize the I/O pins for the FCC Ethernet.
-*/
-static void __init
-init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-						volatile cpm2_map_t *immap)
-{
-
-	/* FCC1 pins are on port A/C.  FCC2/3 are port B/C.
-	*/
-	if (fip->fc_proff == PROFF_FCC1) {
-		/* Configure port A and C pins for FCC1 Ethernet.
-		 */
-		io->iop_pdira &= ~PA1_DIRA_BOUT;
-		io->iop_pdira |= PA1_DIRA_BIN;
-		io->iop_psora &= ~PA1_PSORA_BOUT;
-		io->iop_psora |= PA1_PSORA_BIN;
-		io->iop_ppara |= (PA1_DIRA_BOUT | PA1_DIRA_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC2) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB2_DIRB_BOUT;
-		io->iop_pdirb |= PB2_DIRB_BIN;
-		io->iop_psorb &= ~PB2_PSORB_BOUT;
-		io->iop_psorb |= PB2_PSORB_BIN;
-		io->iop_pparb |= (PB2_DIRB_BOUT | PB2_DIRB_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC3) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB3_DIRB_BOUT;
-		io->iop_pdirb |= PB3_DIRB_BIN;
-		io->iop_psorb &= ~PB3_PSORB_BOUT;
-		io->iop_psorb |= PB3_PSORB_BIN;
-		io->iop_pparb |= (PB3_DIRB_BOUT | PB3_DIRB_BIN);
-
-		io->iop_pdirc &= ~PC3_DIRC_BOUT;
-		io->iop_pdirc |= PC3_DIRC_BIN;
-		io->iop_psorc &= ~PC3_PSORC_BOUT;
-		io->iop_psorc |= PC3_PSORC_BIN;
-		io->iop_pparc |= (PC3_DIRC_BOUT | PC3_DIRC_BIN);
-
-	}
-
-	/* Port C has clocks......
-	*/
-	io->iop_psorc &= ~(fip->fc_trxclocks);
-	io->iop_pdirc &= ~(fip->fc_trxclocks);
-	io->iop_pparc |= fip->fc_trxclocks;
-
-#ifdef	CONFIG_USE_MDIO
-	/* ....and the MII serial clock/data.
-	*/
-	io->iop_pdatc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_podrc &= ~(fip->fc_mdio | fip->fc_mdck);
-	io->iop_pdirc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_pparc &= ~(fip->fc_mdio | fip->fc_mdck);
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all FCC bits to zero,
-	 * then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_fcr &= ~(fip->fc_clockmask);
-	immap->im_cpmux.cmx_fcr |= fip->fc_clockroute;
-}
-
-static void __init
-init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-						volatile cpm2_map_t *immap)
-{
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	int		i, j;
-	struct		fcc_enet_private *cep;
-	volatile	fcc_enet_t	*ep;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-	cp = cpmp;
-
-	bd = (bd_t *)__res;
-
-	/* Zero the whole thing.....I must have missed some individually.
-	 * It works when I do this.
-	 */
-	memset((char *)ep, 0, sizeof(fcc_enet_t));
-
-	/* Allocate space for the buffer descriptors from regular memory.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	cep->rx_bd_base = kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_rbase = __pa(cep->rx_bd_base);
-	cep->tx_bd_base = kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_tbase = __pa(cep->tx_bd_base);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-	ep->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-
-	/* Set maximum bytes per receive buffer.
-	 * It must be a multiple of 32.
-	 */
-	ep->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Allocate space in the reserved FCC area of DPRAM for the
-	 * internal buffers.  No one uses this space (yet), so we
-	 * can do this.  Later, we will add resource management for
-	 * this area.
-	 */
-	mem_addr = CPM_FCC_SPECIAL_BASE + (fip->fc_fccnum * 128);
-	ep->fen_genfcc.fcc_riptr = mem_addr;
-	ep->fen_genfcc.fcc_tiptr = mem_addr+32;
-	ep->fen_padptr = mem_addr+64;
-	memset((char *)(&(immap->im_dprambase[(mem_addr+64)])), 0x88, 32);
-
-	ep->fen_genfcc.fcc_rbptr = 0;
-	ep->fen_genfcc.fcc_tbptr = 0;
-	ep->fen_genfcc.fcc_rcrc = 0;
-	ep->fen_genfcc.fcc_tcrc = 0;
-	ep->fen_genfcc.fcc_res1 = 0;
-	ep->fen_genfcc.fcc_res2 = 0;
-
-	ep->fen_camptr = 0;	/* CAM isn't used in this driver */
-
-	/* Set CRC preset and mask.
-	*/
-	ep->fen_cmask = 0xdebb20e3;
-	ep->fen_cpres = 0xffffffff;
-
-	ep->fen_crcec = 0;	/* CRC Error counter */
-	ep->fen_alec = 0;	/* alignment error counter */
-	ep->fen_disfc = 0;	/* discard frame counter */
-	ep->fen_retlim = 15;	/* Retry limit threshold */
-	ep->fen_pper = 0;	/* Normal persistence */
-
-	/* Clear hash filter tables.
-	*/
-	ep->fen_gaddrh = 0;
-	ep->fen_gaddrl = 0;
-	ep->fen_iaddrh = 0;
-	ep->fen_iaddrl = 0;
-
-	/* Clear the Out-of-sequence TxBD.
-	*/
-	ep->fen_tfcstat = 0;
-	ep->fen_tfclen = 0;
-	ep->fen_tfcptr = 0;
-
-	ep->fen_mflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->fen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 * So, far we have only been given one Ethernet address. We make
-	 * it unique by setting a few bits in the upper byte of the
-	 * non-static part of the address.
-	 */
-	eap = (unsigned char *)&(ep->fen_paddrh);
-	for (i=5; i>=0; i--) {
-
-/*
- * The EP8260 only uses FCC3, so we can safely give it the real
- * MAC address.
- */
-#ifdef CONFIG_SBC82xx
-		if (i == 5) {
-			/* bd->bi_enetaddr holds the SCC0 address; the FCC
-			   devices count up from there */
-			dev->dev_addr[i] = bd->bi_enetaddr[i] & ~3;
-			dev->dev_addr[i] += 1 + fip->fc_fccnum;
-			*eap++ = dev->dev_addr[i];
-		}
-#else
-#ifndef CONFIG_RPX8260
-		if (i == 3) {
-			dev->dev_addr[i] = bd->bi_enetaddr[i];
-			dev->dev_addr[i] |= (1 << (7 - fip->fc_fccnum));
-			*eap++ = dev->dev_addr[i];
-		} else
-#endif
-		{
-			*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-		}
-#endif
-	}
-
-	ep->fen_taddrh = 0;
-	ep->fen_taddrm = 0;
-	ep->fen_taddrl = 0;
-
-	ep->fen_maxd1 = PKT_MAXDMA_SIZE;	/* maximum DMA1 length */
-	ep->fen_maxd2 = PKT_MAXDMA_SIZE;	/* maximum DMA2 length */
-
-	/* Clear stat counters, in case we ever enable RMON.
-	*/
-	ep->fen_octc = 0;
-	ep->fen_colc = 0;
-	ep->fen_broc = 0;
-	ep->fen_mulc = 0;
-	ep->fen_uspc = 0;
-	ep->fen_frgc = 0;
-	ep->fen_ospc = 0;
-	ep->fen_jbrc = 0;
-	ep->fen_p64c = 0;
-	ep->fen_p65c = 0;
-	ep->fen_p128c = 0;
-	ep->fen_p256c = 0;
-	ep->fen_p512c = 0;
-	ep->fen_p1024c = 0;
-
-	ep->fen_rfthr = 0;	/* Suggested by manual */
-	ep->fen_rfcnt = 0;
-	ep->fen_cftype = 0;
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<FCC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FCC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_datlen = 0;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += FCC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock, 0x0c,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-}
-
-/* Let 'er rip.
-*/
-static void __init
-init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
-{
-	volatile fcc_t	*fccp;
-	struct fcc_enet_private *cep;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	fccp = cep->fccp;
-
-#ifdef CONFIG_RPX8260
-#ifdef PHY_INTERRUPT
-	/* Route PHY interrupt to IRQ.  The following code only works for
-	 * IRQ1 - IRQ7.  It does not work for Port C interrupts.
-	 */
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) &= ~BCSR13_FETH_IRQMASK;
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) |=
-		((PHY_INTERRUPT - SIU_INT_IRQ1 + 1) << 4);
-#endif
-	/* Initialize MDIO pins. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) &= ~BCSR4_MII_MDC;
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |=
-		BCSR4_MII_READ | BCSR4_MII_MDIO;
-	/* Enable external LXT971 PHY. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |= BCSR4_EN_PHY;
-	udelay(1000);
-	*((volatile u_char *) (RPX_CSR_ADDR+ 4)) |= BCSR4_EN_MII;
-	udelay(1000);
-#endif	/* ifdef CONFIG_RPX8260 */
-
-	fccp->fcc_fcce = 0xffff;	/* Clear any pending events */
-
-	/* Leave FCC interrupts masked for now.  Will be unmasked by
-	 * fcc_restart().
-	 */
-	fccp->fcc_fccm = 0;
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(fip->fc_interrupt, fcc_enet_interrupt, 0, "fenet",
-				dev) < 0)
-		printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
-
-#ifdef	PHY_INTERRUPT
-	/* Make IRQn edge triggered.  This does not work if PHY_INTERRUPT is
-	 * on Port C.
-	 */
-	((volatile cpm2_map_t *) CPM_MAP_ADDR)->im_intctl.ic_siexr |=
-		(1 << (14 - (PHY_INTERRUPT - SIU_INT_IRQ1)));
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
-							"mii", dev) < 0)
-		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#endif	/* PHY_INTERRUPT */
-
-	/* Set GFMR to enable Ethernet operating mode.
-	 */
-	fccp->fcc_gfmr = (FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	fccp->fcc_fdsr = 0xd555;
-
-	/* Set protocol specific processing mode for Ethernet.
-	 * This has to be adjusted for Full Duplex operation after we can
-	 * determine how to detect that.
-	 */
-	fccp->fcc_fpsmr = FCC_PSMR_ENCRC;
-
-#ifdef CONFIG_PQ2ADS
-	/* Enable the PHY. */
-	*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
-	*(volatile uint *)(BCSR_ADDR + 4) |=  BCSR1_FETH_RST;
-#endif
-#if defined(CONFIG_PQ2ADS) || defined(CONFIG_PQ2FADS)
-	/* Enable the 2nd PHY. */
-	*(volatile uint *)(BCSR_ADDR + 12) &= ~BCSR3_FETHIEN2;
-	*(volatile uint *)(BCSR_ADDR + 12) |=  BCSR3_FETH2_RST;
-#endif
-
-#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260)
-	/* start in full duplex mode, and negotiate speed
-	 */
-	fcc_restart (dev, 1);
-#else
-	/* start in half duplex mode
-	 */
-	fcc_restart (dev, 0);
-#endif
-}
-
-#ifdef	CONFIG_USE_MDIO
-/* MII command/status interface.
- * I'm not going to describe all of the details.  You can find the
- * protocol definition in many other places, including the data sheet
- * of most PHY parts.
- * I wonder what "they" were thinking (maybe weren't) when they leave
- * the I2C in the CPM but I have to toggle these bits......
- */
-#ifdef CONFIG_RPX8260
-	/* The EP8260 has the MDIO pins in a BCSR instead of on Port C
-	 * like most other boards.
-	 */
-#define MDIO_ADDR ((volatile u_char *)(RPX_CSR_ADDR + 4))
-#define MAKE_MDIO_OUTPUT *MDIO_ADDR &= ~BCSR4_MII_READ
-#define MAKE_MDIO_INPUT  *MDIO_ADDR |=  BCSR4_MII_READ | BCSR4_MII_MDIO
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDIO;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDIO;
-#define IN_MDIO (*MDIO_ADDR & BCSR4_MII_MDIO)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDC;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDC;
-#else	/* ifdef CONFIG_RPX8260 */
-	/* This is for the usual case where the MDIO pins are on Port C.
-	 */
-#define MDIO_ADDR (((volatile cpm2_map_t *)CPM_MAP_ADDR)->im_ioport)
-#define MAKE_MDIO_OUTPUT MDIO_ADDR.iop_pdirc |= fip->fc_mdio
-#define MAKE_MDIO_INPUT MDIO_ADDR.iop_pdirc &= ~fip->fc_mdio
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdio;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdio;
-#define IN_MDIO ((MDIO_ADDR.iop_pdatc) & fip->fc_mdio)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdck;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdck;
-#endif	/* ifdef CONFIG_RPX8260 */
-
-static uint
-mii_send_receive(fcc_info_t *fip, uint cmd)
-{
-	uint		retval;
-	int		read_op, i, off;
-	const int	us = 1;
-
-	read_op = ((cmd & 0xf0000000) == 0x60000000);
-
-	/* Write preamble
-	 */
-	OUT_MDIO(1);
-	MAKE_MDIO_OUTPUT;
-	OUT_MDIO(1);
-	for (i = 0; i < 32; i++)
-	{
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	/* Write data
-	 */
-	for (i = 0, off = 31; i < (read_op ? 14 : 32); i++, --off)
-	{
-		OUT_MDIO((cmd >> off) & 0x00000001);
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	retval = cmd;
-
-	if (read_op)
-	{
-		retval >>= 16;
-
-		MAKE_MDIO_INPUT;
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-
-		for (i = 0; i < 16; i++)
-		{
-			udelay(us);
-			OUT_MDC(1);
-			udelay(us);
-			retval <<= 1;
-			if (IN_MDIO)
-				retval++;
-			OUT_MDC(0);
-		}
-	}
-
-	MAKE_MDIO_INPUT;
-	udelay(us);
-	OUT_MDC(1);
-	udelay(us);
-	OUT_MDC(0);
-
-	return retval;
-}
-#endif	/* CONFIG_USE_MDIO */
-
-static void
-fcc_stop(struct net_device *dev)
-{
-	struct fcc_enet_private	*fep= (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-	fcc_info_t *fip = fep->fip;
-	volatile fcc_enet_t *ep = fep->ep;
-	volatile cpm_cpm2_t *cp = cpmp;
-	volatile cbd_t *bdp;
-	int i;
-
-	if ((fccp->fcc_gfmr & (FCC_GFMR_ENR | FCC_GFMR_ENT)) == 0)
-		return;	/* already down */
-
-	fccp->fcc_fccm = 0;
-
-	/* issue the graceful stop tx command */
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_GRA_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Disable transmit/receive */
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-
-	/* issue the restart tx command */
-	fccp->fcc_fcce = FCC_ENET_GRA;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* free tx buffers */
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->tx_free = TX_RING_SIZE;
-	ep->fen_genfcc.fcc_tbptr = ep->fen_genfcc.fcc_tbase;
-
-	/* Initialize the tx buffer descriptors. */
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-	/* Set the last buffer to wrap. */
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-}
-
-static void
-fcc_restart(struct net_device *dev, int duplex)
-{
-	struct fcc_enet_private	*fep = (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-
-	/* stop any transmissions in progress */
-	fcc_stop(dev);
-
-	if (duplex)
-		fccp->fcc_fpsmr |= FCC_PSMR_FDE | FCC_PSMR_LPB;
-	else
-		fccp->fcc_fpsmr &= ~(FCC_PSMR_FDE | FCC_PSMR_LPB);
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	fccp->fcc_fccm = (FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
-
-	/* Enable transmit/receive */
-	fccp->fcc_gfmr |= FCC_GFMR_ENR | FCC_GFMR_ENT;
-}
-
-static int
-fcc_enet_open(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		fcc_restart(dev, 0);	/* always start in half-duplex */
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	fcc_restart(dev, 0);	/* always start in half-duplex */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-#endif	/* CONFIG_USE_MDIO */
-}
-
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
deleted file mode 100644
index c623e44f01ad..000000000000
--- a/arch/ppc/8xx_io/Kconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# MPC8xx Communication options
-#
-
-menu "MPC8xx CPM Options"
-	depends on 8xx
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Motorola MPC8xx serial
-	  communications controller.
-
-choice
-	prompt "SCC used for Ethernet"
-	depends on SCC_ENET
-	default SCC1_ENET
-
-config SCC1_ENET
-	bool "SCC1"
-	help
-	  Use MPC8xx serial communications controller 1 to drive Ethernet
-	  (default).
-
-config SCC2_ENET
-	bool "SCC2"
-	help
-	  Use MPC8xx serial communications controller 2 to drive Ethernet.
-
-config SCC3_ENET
-	bool "SCC3"
-	help
-	  Use MPC8xx serial communications controller 3 to drive Ethernet.
-
-endchoice
-
-config FEC_ENET
-	bool "860T FEC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
-	  the Motorola MPC8260.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-	help
-	  On some boards the hardware configuration of the ethernet PHY can be
-	  used without any software interaction over the MDIO interface, so
-	  all MII code can be omitted. Say N here if unsure or if you don't
-	  need link status reports.
-
-config  FEC_AM79C874
-	bool "Support AMD79C874 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT970
-	bool "Support LXT970 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT971
-	bool "Support LXT971 PHY"
-	depends on USE_MDIO
-	
-config FEC_QS6612
-	bool "Support QS6612 PHY"
-	depends on USE_MDIO
-	
-config ENET_BIG_BUFFERS
-	bool "Use Big CPM Ethernet Buffers"
-	depends on SCC_ENET || FEC_ENET
-	help
-	  Allocate large buffers for MPC8xx Ethernet. Increases throughput
-	  and decreases the likelihood of dropped packets, but costs memory.
-
-# This doesn't really belong here, but it is convenient to ask
-# 8xx specific questions.
-comment "Generic MPC8xx Options"
-
-config 8xx_COPYBACK
-	bool "Copy-Back Data Cache (else Writethrough)"
-	help
-	  Saying Y here will cause the cache on an MPC8xx processor to be used
-	  in Copy-Back mode.  If you say N here, it is used in Writethrough
-	  mode.
-
-	  If in doubt, say Y here.
-
-config 8xx_CPU6
-	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
-	help
-	  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
-	  require workarounds for Linux (and most other OSes to work).  If you
-	  get a BUG() very early in boot, this might fix the problem.  For
-	  more details read the document entitled "MPC860 Family Device Errata
-	  Reference" on Motorola's website.  This option also incurs a
-	  performance hit.
-
-	  If in doubt, say N here.
-
-choice
-	prompt "Microcode patch selection"
-	default NO_UCODE_PATCH
-	help
-	  Help not implemented yet, coming soon.
-
-config NO_UCODE_PATCH
-	bool "None"
-
-config USB_SOF_UCODE_PATCH
-	bool "USB SOF patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_UCODE_PATCH
-	bool "I2C/SPI relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_SMC1_UCODE_PATCH
-	bool "I2C/SPI/SMC1 relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-endchoice
-
-config UCODE_PATCH
-	bool
-	default y
-	depends on !NO_UCODE_PATCH
-
-endmenu
-
diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile
deleted file mode 100644
index 1051a06df7e0..000000000000
--- a/arch/ppc/8xx_io/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux MPC8xx ppc-specific parts of comm processor
-#
-
-obj-y			:= commproc.o
-
-obj-$(CONFIG_FEC_ENET)	+= fec.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
-obj-$(CONFIG_UCODE_PATCH) += micropatch.o
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
deleted file mode 100644
index 752443df5ecf..000000000000
--- a/arch/ppc/8xx_io/commproc.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent.  On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose.  Current, the first 512 bytes and the last 256 bytes of
- * memory are used.  Right now I am conservative and only use the
- * memory that can never be used for microcode.  If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-#include <asm/rheap.h>
-
-#define immr_map(member)						\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      FIELD_SIZEOF(immap_t, member));		\
-	addr;								\
-})
-
-#define immr_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset, size);		\
-	addr;								\
-})
-
-static void m8xx_cpm_dpinit(void);
-cpm8xx_t	*cpmp;		/* Pointer to comm processor space */
-
-/* CPM interrupt vector functions.
-*/
-struct	cpm_action {
-	void	(*handler)(void *);
-	void	*dev_id;
-};
-static	struct	cpm_action cpm_vecs[CPMVEC_NR];
-static	irqreturn_t cpm_interrupt(int irq, void * dev);
-static	irqreturn_t cpm_error_interrupt(int irq, void *dev);
-/* Define a table of names to identify CPM interrupt handlers in
- * /proc/interrupts.
- */
-const char *cpm_int_name[] =
-	{ "error",	"PC4",		"PC5",		"SMC2",
-	  "SMC1",	"SPI",		"PC6",		"Timer 4",
-	  "",		"PC7",		"PC8",		"PC9",
-	  "Timer 3",	"",		"PC10",		"PC11",
-	  "I2C",	"RISC Timer",	"Timer 2",	"",
-	  "IDMA2",	"IDMA1",	"SDMA error",	"PC12",
-	  "PC13",	"Timer 1",	"PC14",		"SCC4",
-	  "SCC3",	"SCC2",		"SCC1",		"PC15"
-	};
-
-static void
-cpm_mask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_unmask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_ack(unsigned int irq)
-{
-	/* We do not need to do anything here. */
-}
-
-static void
-cpm_eoi(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr, (1 << cpm_vec));
-}
-
-struct hw_interrupt_type cpm_pic = {
-	.typename	= " CPM      ",
-	.enable		= cpm_unmask_irq,
-	.disable	= cpm_mask_irq,
-	.ack		= cpm_ack,
-	.end		= cpm_eoi,
-};
-
-void
-m8xx_cpm_reset(void)
-{
-	volatile immap_t	 *imp;
-	volatile cpm8xx_t	*commproc;
-
-	imp = (immap_t *)IMAP_ADDR;
-	commproc = (cpm8xx_t *)&imp->im_cpm;
-
-#ifdef CONFIG_UCODE_PATCH
-	/* Perform a reset.
-	*/
-	commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (commproc->cp_cpcr & CPM_CR_FLG);
-
-	cpm_load_patch(imp);
-#endif
-
-	/* Set SDMA Bus Request priority 5.
-	 * On 860T, this also enables FEC priority 6.  I am not sure
-	 * this is what we really want for some applications, but the
-	 * manual recommends it.
-	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
-	 */
-	out_be32(&imp->im_siu_conf.sc_sdcr, 1),
-
-	/* Reclaim the DP memory for our use. */
-	m8xx_cpm_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	*/
-	cpmp = (cpm8xx_t *)commproc;
-}
-
-/* This is called during init_IRQ.  We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.mask = CPU_MASK_NONE,
-};
-static struct irqaction cpm_interrupt_irqaction = {
-	.handler = cpm_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "CPM cascade",
-};
-
-void
-cpm_interrupt_init(void)
-{
-	int i;
-
-	/* Initialize the CPM interrupt controller.
-	*/
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr,
-	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, 0);
-
-        /* install the CPM interrupt controller routines for the CPM
-         * interrupt vectors
-         */
-        for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ )
-                irq_desc[i].chip = &cpm_pic;
-
-	/* Set our interrupt handler with the core CPU.	*/
-	if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction))
-		panic("Could not allocate CPM IRQ!");
-
-	/* Install our own error handler. */
-	cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR];
-	if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
-		panic("Could not allocate CPM error IRQ!");
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, CICR_IEN);
-}
-
-/*
- * Get the CPM interrupt vector.
- */
-int
-cpm_get_irq(void)
-{
-	int cpm_vec;
-
-	/* Get the vector by setting the ACK bit and then reading
-	 * the register.
-	 */
-	out_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr, 1);
-	cpm_vec = in_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr);
-	cpm_vec >>= 11;
-
-	return cpm_vec;
-}
-
-/* CPM interrupt controller cascade interrupt.
-*/
-static	irqreturn_t
-cpm_interrupt(int irq, void * dev)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the CPM cascade interrupt in the SIU
-	 * and to make the CPM cascade interrupt visible in /proc/interrupts.
-	 */
-	return IRQ_HANDLED;
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts.  All we have to do is ACK it
- * and return.  This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static	irqreturn_t
-cpm_error_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-/* A helper function to translate the handler prototype required by
- * request_irq() to the handler prototype required by cpm_install_handler().
- */
-static irqreturn_t
-cpm_handler_helper(int irq, void *dev_id)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	(*cpm_vecs[cpm_vec].handler)(dev_id);
-
-	return IRQ_HANDLED;
-}
-
-/* Install a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.  Rather than using
- * this routine to install a CPM interrupt handler, you can now use
- * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to
- * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47).
- *
- * Notice that the prototype of the interrupt handler function must be
- * different depending on whether you install the handler with
- * request_irq() or cpm_install_handler().
- */
-void
-cpm_install_handler(int cpm_vec, void (*handler)(void *), void *dev_id)
-{
-	int err;
-
-	/* If null handler, assume we are trying to free the IRQ.
-	*/
-	if (!handler) {
-		free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id);
-		return;
-	}
-
-	if (cpm_vecs[cpm_vec].handler != 0)
-		printk(KERN_INFO "CPM interrupt %x replacing %x\n",
-			(uint)handler, (uint)cpm_vecs[cpm_vec].handler);
-	cpm_vecs[cpm_vec].handler = handler;
-	cpm_vecs[cpm_vec].dev_id = dev_id;
-
-	if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper,
-					0, cpm_int_name[cpm_vec], dev_id)))
-		printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n",
-				err, cpm_vec);
-}
-
-/* Free a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.
- */
-void
-cpm_free_handler(int cpm_vec)
-{
-	request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0,
-		cpm_vecs[cpm_vec].dev_id);
-
-	cpm_vecs[cpm_vec].handler = NULL;
-	cpm_vecs[cpm_vec].dev_id = NULL;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-#define BRG_INT_CLK		(((bd_t *)__res)->bi_intfreq)
-#define BRG_UART_CLK		(BRG_INT_CLK/16)
-#define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)
-
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	bp = (uint *)&cpmp->cp_brgc1;
-	bp += brg;
-	/* The BRG has a 12-bit counter.  For really slow baud rates (or
-	 * really fast processors), we may have to further divide by 16.
-	 */
-	if (((BRG_UART_CLK / rate) - 1) < 4096)
-		*bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
-	else
-		*bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
-						CPM_BRG_EN | CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT	8
-static u8* dpram_vbase;
-static uint dpram_pbase;
-
-void m8xx_cpm_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
-	dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
-
-	/* Initialize the info header */
-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/*
-	 * Attach the usable dpmem area.
-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
-	 * with the processor and the microcode patches applied / activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8* addr)
-{
-	return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
deleted file mode 100644
index 5899aea1644b..000000000000
--- a/arch/ppc/8xx_io/enet.c
+++ /dev/null
@@ -1,982 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * I copied the basic skeleton from the lance driver, because I did not
- * know how to write the Linux driver, but I did know how the LANCE worked.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-#include <asm/cacheflush.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8xx CPM performs the Ethernet processing on SCC1.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- *
- * The send packet thread has partial control over the Tx ring and the
- * 'cep->tx_busy' flag.  It sets the tx_busy flag whenever it's queuing a Tx
- * packet. If the next queue slot is empty, it clears the tx_busy flag when
- * finished otherwise it sets the 'lp->tx_full' flag.
- *
- * The MBX has a control register external to the MPC8xx that has some
- * control of the Ethernet interface.  Information is in the manual for
- * your board.
- *
- * The RPX boards have an external control/status register.  Consult the
- * programming documents for details unique to your board.
- *
- * For the TQM8xx(L) modules, there is no control register interface.
- * All functions are directly controlled using I/O pins.  See <asm/cpm1.h>.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define CPM_ENET_RX_PAGES	32
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		64	/* Must be power of two */
-#define TX_RING_MOD_MASK	63	/*   for this to work */
-#else
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static void scc_enet_interrupt(void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* Get this from various configuration locations (depends on board).
-*/
-/*static	ushort	my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
-
-/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
- * use SCC2. Some even may use SCC3.
- * This is easily extended if necessary.
- */
-#if defined(CONFIG_SCC3_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC3
-#define PROFF_ENET	PROFF_SCC3
-#define SCC_ENET	2		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC3
-#elif defined(CONFIG_SCC2_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC2
-#define PROFF_ENET	PROFF_SCC2
-#define SCC_ENET	1		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC2
-#elif defined(CONFIG_SCC1_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC1
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC1
-#else
-#error CONFIG_SCCx_ENET not defined
-#endif
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_busy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)(skb->data),
-					(unsigned long)(skb->data + skb->len));
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static void
-scc_enet_interrupt(void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm8xx_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("CPM ENET: BSY can't happen.\n");
-	}
-
-	return;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				cep->rx_vaddr[bdp - cep->rx_bd_base],
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.  If EPPC-Bug loaded us, or performed
- * some other network I/O, a whole bunch of this has already been set up.
- * It is no big deal if we do it again, we just have to disable the
- * transmit and receive to make sure we don't catch the CPM with some
- * inconsistent control information.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, k, err;
-	uint dp_offset;
-	unsigned char	*eap, *ba;
-	dma_addr_t	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm8xx_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	immap_t		*immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000);	/* and to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Cookbook style from the MPC860 manual.....
-	 * Not all of this is necessary if EPPC-Bug has initialized
-	 * the network.
-	 * So far we are lucky, all board configurations use the same
-	 * pins, or at least the same I/O Port for these functions.....
-	 * It can't last though......
-	 */
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
-	/* Configure port A pins for Txd and Rxd.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_paodr &=                ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
-	/* Configure port B pins for Txd and Rxd.
-	*/
-	immap->im_cpm.cp_pbpar |=  (PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbodr &=		 ~PB_ENET_TXD;
-#else
-#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
-	/* Configure port C pins to disable External Loopback
-	 */
-	immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdir |=  PC_ENET_LBK;
-	immap->im_ioport.iop_pcso  &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
-#endif	/* PC_ENET_LBK */
-
-#ifdef PE_ENET_TCLK
-	/* Configure port E for TCLK and RCLK.
-	*/
-	cp->cp_pepar |=  (PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_peso  &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-#else
-	/* Configure port A for TCLK and RCLK.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_TCLK | PA_ENET_RCLK);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-#endif
-
-	/* Configure port C pins to enable CLSN and RENA.
-	*/
-	immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcso  |=  (PC_ENET_CLSN | PC_ENET_RENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	cp->cp_sicr &= ~SICR_ENET_MASK;
-	cp->cp_sicr |=  SICR_ENET_CLKRT;
-
-	/* Manual says set SDDR, but I can't find anything with that
-	 * name.  I think it is a misprint, and should be SDCR.  This
-	 * has already been set by the communication processor initialization.
-	 */
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	/* Issue init Rx BD command for SCC.
-	 * Manual says to perform an Init Rx parameters here.  We have
-	 * to perform both Rx and Tx because the SCC may have been
-	 * already running.
-	 * In addition, we have to do it later because we don't yet have
-	 * all of the BD control/status set properly.
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	 */
-
-	/* Initialize function code registers for big-endian.
-	*/
-	ep->sen_genscc.scc_rfcr = SCC_EB;
-	ep->sen_genscc.scc_tfcr = SCC_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	k = 0;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
-				&mem_addr, GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = mem_addr;
-			cep->rx_vaddr[k++] = ba;
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			ba += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev);
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-#if   (!defined (PB_ENET_TENA) &&  defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	immap->im_ioport.iop_pcpar |=  PC_ENET_TENA;
-	immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA))
-	cp->cp_pepar |=  PE_ENET_TENA;
-	cp->cp_pedir &= ~PE_ENET_TENA;
-	cp->cp_peso  |=  PE_ENET_TENA;
-#else
-#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	/* And while we are here, set the configuration to enable ethernet.
-	*/
-	*((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
-	*((volatile uint *)RPX_CSR_ADDR) |=
-			(BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
-#endif
-
-#ifdef CONFIG_BSEIP
-	/* BSE uses port B and C for PHY control.
-	*/
-	cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-
-	immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
-#endif
-
-#ifdef CONFIG_FADS
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-
-	/* Enable the EEST PHY.
-	*/
-	*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
-#endif
-
-	dev->base_addr = (unsigned long)ep;
-#if 0
-	dev->name = "CPM_ENET";
-#endif
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
-
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
deleted file mode 100644
index 2c604d4f6e8b..000000000000
--- a/arch/ppc/8xx_io/fec.c
+++ /dev/null
@@ -1,1983 +0,0 @@
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
- * Includes support for the following PHYs: QS6612, LXT970, LXT971/2.
- *
- * Right now, I am very wasteful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- * Much better multiple PHY support by Magnus Damm.
- * Copyright (c) 2000 Ericsson Radio Systems AB.
- *
- * Make use of MII for PHY control configurable.
- * Some fixes.
- * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering.
- *
- * Support for AMD AM79C874 added.
- * Thomas Lange, thomas@corelatus.com
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#ifdef CONFIG_FEC_PACKETHOOK
-#include <linux/pkthook.h>
-#endif
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs
-*/
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define FEC_ENET_RX_PAGES	16
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-#else
-#define FEC_ENET_RX_PAGES	4
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
-#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
-#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
-#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */
-#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */
-#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */
-#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */
-#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */
-#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
-#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
-
-/*
-*/
-#define FEC_ECNTRL_PINMUX	0x00000004
-#define FEC_ECNTRL_ETHER_EN	0x00000002
-#define FEC_ECNTRL_RESET	0x00000001
-
-#define FEC_RCNTRL_BC_REJ	0x00000010
-#define FEC_RCNTRL_PROM		0x00000008
-#define FEC_RCNTRL_MII_MODE	0x00000004
-#define FEC_RCNTRL_DRT		0x00000002
-#define FEC_RCNTRL_LOOP		0x00000001
-
-#define FEC_TCNTRL_FDEN		0x00000004
-#define FEC_TCNTRL_HBC		0x00000002
-#define FEC_TCNTRL_GTS		0x00000001
-
-/* Delay to wait for FEC reset command to complete (in us)
-*/
-#define FEC_RESET_DELAY		50
-
-/* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fec_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	uint	phy_speed;
-	phy_info_t	*phy;
-	struct work_struct phy_task;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	unsigned long	ph_lock;
-	fec_ph_func	*ph_rxhandler;
-	fec_ph_func	*ph_txhandler;
-	__u16		ph_proto;
-	volatile __u32	*ph_regaddr;
-	void 		*ph_priv;
-#endif
-};
-
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-#ifdef	CONFIG_USE_MDIO
-static void fec_enet_mii(struct net_device *dev);
-#endif	/* CONFIG_USE_MDIO */
-#ifdef CONFIG_FEC_PACKETHOOK
-static void  fec_enet_tx(struct net_device *dev, __u32 regval);
-static void  fec_enet_rx(struct net_device *dev, __u32 regval);
-#else
-static void  fec_enet_tx(struct net_device *dev);
-static void  fec_enet_rx(struct net_device *dev);
-#endif
-static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void fec_restart(struct net_device *dev, int duplex);
-static void fec_stop(struct net_device *dev);
-static	ushort	my_enet_addr[3];
-
-#ifdef	CONFIG_USE_MDIO
-/* MII processing.  We keep this as simple as possible.  Requests are
- * placed on the list (if there is room).  When the request is finished
- * by the MII, an optional function may be called.
- */
-typedef struct mii_list {
-	uint	mii_regval;
-	void	(*mii_func)(uint val, struct net_device *dev);
-	struct	mii_list *mii_next;
-} mii_list_t;
-
-#define		NMII	20
-mii_list_t	mii_cmds[NMII];
-mii_list_t	*mii_free;
-mii_list_t	*mii_head;
-mii_list_t	*mii_tail;
-
-static int	mii_queue(struct net_device *dev, int request,
-				void (*func)(uint, struct net_device *));
-
-/* Make MII read/write commands for the FEC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | ((REG & 0x1f) << 18) | \
-						(VAL & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Register definitions for the PHY.
-*/
-
-#define MII_REG_CR          0  /* Control Register                         */
-#define MII_REG_SR          1  /* Status Register                          */
-#define MII_REG_PHYIR1      2  /* PHY Identification Register 1            */
-#define MII_REG_PHYIR2      3  /* PHY Identification Register 2            */
-#define MII_REG_ANAR        4  /* A-N Advertisement Register               */
-#define MII_REG_ANLPAR      5  /* A-N Link Partner Ability Register        */
-#define MII_REG_ANER        6  /* A-N Expansion Register                   */
-#define MII_REG_ANNPTR      7  /* A-N Next Page Transmit Register          */
-#define MII_REG_ANLPRNPR    8  /* A-N Link Partner Received Next Page Reg. */
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef CONFIG_FEC_PACKETHOOK
-int
-fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun,
-		__u16 proto, volatile __u32 *regaddr, void *priv)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-	if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) {
-		retval = -EBUSY;
-		goto out;
-	}
-	fep->ph_rxhandler = rxfun;
-	fep->ph_txhandler = txfun;
-	fep->ph_proto = proto;
-	fep->ph_regaddr = regaddr;
-	fep->ph_priv = priv;
-
-	out:
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-
-int
-fec_unregister_ph(struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-EXPORT_SYMBOL(fec_register_ph);
-EXPORT_SYMBOL(fec_unregister_ph);
-
-#endif /* CONFIG_FEC_PACKETHOOK */
-
-static int
-fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t	*bdp;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	if (!fep->link) {
-		/* Link is down or autonegotiation is in progress. */
-		return 1;
-	}
-
-	/* Fill in a Tx ring entry */
-	bdp = fep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since dev->tbusy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_bufaddr = __pa(skb->data);
-	bdp->cbd_datlen = skb->len;
-
-	/* Save skb pointer.
-	*/
-	fep->tx_skbuff[fep->skb_cur] = skb;
-
-	fep->stats.tx_bytes += skb->len;
-	fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)skb->data,
-			   (unsigned long)skb->data + skb->len);
-
-	/* disable interrupts while triggering transmit */
-	spin_lock_irq(&fep->lock);
-
-	/* Send it on its way.  Tell FEC its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
-			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* Trigger transmission start */
-	fecp->fec_x_des_active = 0x01000000;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
-		bdp = fep->tx_bd_base;
-	} else {
-		bdp++;
-	}
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		fep->tx_full = 1;
-	}
-
-	fep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&fep->lock);
-
-	return 0;
-}
-
-static void
-fec_timeout(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	fep->stats.tx_errors++;
-#ifndef final_version
-	{
-	int	i;
-	cbd_t	*bdp;
-
-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
-	       (unsigned long)fep->dirty_tx,
-	       (unsigned long)fep->cur_rx);
-
-	bdp = fep->tx_bd_base;
-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
-	for (i = 0 ; i < TX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-
-	bdp = fep->rx_bd_base;
-	printk(" rx: %lu buffers\n",  RX_RING_SIZE);
-	for (i = 0 ; i < RX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-	}
-#endif
-	if (!fep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
-static	irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile fec_t	*fecp;
-	uint	int_events;
-#ifdef CONFIG_FEC_PACKETHOOK
-	struct	fec_enet_private *fep = dev->priv;
-	__u32 regval;
-
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	while ((int_events = fecp->fec_ievent) != 0) {
-		fecp->fec_ievent = int_events;
-		if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
-				   FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) {
-			printk("FEC ERROR %x\n", int_events);
-		}
-
-		/* Handle receive event in its own function.
-		 */
-		if (int_events & FEC_ENET_RXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_rx(dev, regval);
-#else
-			fec_enet_rx(dev);
-#endif
-		}
-
-		/* Transmit OK, or non-fatal error. Update the buffer
-		   descriptors. FEC handles all errors, we just discover
-		   them as part of the transmit process.
-		*/
-		if (int_events & FEC_ENET_TXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_tx(dev, regval);
-#else
-			fec_enet_tx(dev);
-#endif
-		}
-
-		if (int_events & FEC_ENET_MII) {
-#ifdef	CONFIG_USE_MDIO
-			fec_enet_mii(dev);
-#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-		}
-
-	}
-	return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_tx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_tx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff	*skb;
-
-	fep = dev->priv;
-	/* lock while transmitting */
-	spin_lock(&fep->lock);
-	bdp = fep->dirty_tx;
-
-	while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
-		if (bdp == fep->cur_tx && fep->tx_full == 0) break;
-
-		skb = fep->tx_skbuff[fep->skb_dirty];
-		/* Check for errors. */
-		if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
-				   BD_ENET_TX_RL | BD_ENET_TX_UN |
-				   BD_ENET_TX_CSL)) {
-			fep->stats.tx_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_HB)  /* No heartbeat */
-				fep->stats.tx_heartbeat_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_LC)  /* Late collision */
-				fep->stats.tx_window_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_RL)  /* Retrans limit */
-				fep->stats.tx_aborted_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_UN)  /* Underrun */
-				fep->stats.tx_fifo_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
-				fep->stats.tx_carrier_errors++;
-		} else {
-#ifdef CONFIG_FEC_PACKETHOOK
-			/* Packet hook ... */
-			if (fep->ph_txhandler &&
-			    ((struct ethhdr *)skb->data)->h_proto
-			    == fep->ph_proto) {
-				fep->ph_txhandler((__u8*)skb->data, skb->len,
-						  regval, fep->ph_priv);
-			}
-#endif
-			fep->stats.tx_packets++;
-		}
-
-#ifndef final_version
-		if (bdp->cbd_sc & BD_ENET_TX_READY)
-			printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			fep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		 */
-#if 0
-printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty);
-#endif
-		dev_kfree_skb_irq (skb/*, FREE_WRITE*/);
-		fep->tx_skbuff[fep->skb_dirty] = NULL;
-		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = fep->tx_bd_base;
-		else
-			bdp++;
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (fep->tx_full) {
-			fep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-#ifdef CONFIG_FEC_PACKETHOOK
-		/* Re-read register. Not exactly guaranteed to be correct,
-		   but... */
-		if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	}
-	fep->dirty_tx = (cbd_t *)bdp;
-	spin_unlock(&fep->lock);
-}
-
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_rx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_rx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t *bdp;
-	struct	sk_buff	*skb;
-	ushort	pkt_len;
-	__u8 *data;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = fep->cur_rx;
-
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame,
-	 * the last indicator should be set.
-	 */
-	if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
-		printk("FEC ENET: rcv is not +last\n");
-#endif
-
-	/* Check for errors. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
-			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-		fep->stats.rx_errors++;
-		if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-		/* Frame too long or too short. */
-			fep->stats.rx_length_errors++;
-		}
-		if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-			fep->stats.rx_frame_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-			fep->stats.rx_crc_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-			fep->stats.rx_crc_errors++;
-	}
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		fep->stats.rx_errors++;
-		fep->stats.rx_frame_errors++;
-		goto rx_processing_done;
-	}
-
-	/* Process the incoming frame.
-	 */
-	fep->stats.rx_packets++;
-	pkt_len = bdp->cbd_datlen;
-	fep->stats.rx_bytes += pkt_len;
-	data = fep->rx_vaddr[bdp - fep->rx_bd_base];
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Packet hook ... */
-	if (fep->ph_rxhandler) {
-		if (((struct ethhdr *)data)->h_proto == fep->ph_proto) {
-			switch (fep->ph_rxhandler(data, pkt_len, regval,
-						  fep->ph_priv)) {
-			case 1:
-				goto rx_processing_done;
-				break;
-			case 0:
-				break;
-			default:
-				fep->stats.rx_errors++;
-				goto rx_processing_done;
-			}
-		}
-	}
-
-	/* If it wasn't filtered - copy it to an sk buffer. */
-#endif
-
-	/* This does 16 byte alignment, exactly what we need.
-	 * The packet length includes FCS, but we don't want to
-	 * include that when passing upstream as it messes up
-	 * bridging applications.
-	 */
-	skb = dev_alloc_skb(pkt_len-4);
-
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		fep->stats.rx_dropped++;
-	} else {
-		skb_put(skb,pkt_len-4);	/* Make room */
-		skb_copy_to_linear_data(skb, data, pkt_len-4);
-		skb->protocol=eth_type_trans(skb,dev);
-		netif_rx(skb);
-	}
-  rx_processing_done:
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = fep->rx_bd_base;
-	else
-		bdp++;
-
-#if 1
-	/* Doing this here will keep the FEC running while we process
-	 * incoming frames.  On a heavily loaded network, we should be
-	 * able to keep up at the expense of system resources.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Re-read register. Not exactly guaranteed to be correct,
-	   but... */
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-   } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
-	fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
-	/* Doing this here will allow us to process all frames in the
-	 * ring before the FEC is allowed to put more there.  On a heavily
-	 * loaded network, some frames may be lost.  Unfortunately, this
-	 * increases the interrupt overhead since we can potentially work
-	 * our way back to the interrupt return only to come right back
-	 * here.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-}
-
-
-#ifdef	CONFIG_USE_MDIO
-static void
-fec_enet_mii(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*ep;
-	mii_list_t	*mip;
-	uint		mii_reg;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-	mii_reg = ep->fec_mii_data;
-
-	if ((mip = mii_head) == NULL) {
-		printk("MII and no head!\n");
-		return;
-	}
-
-	if (mip->mii_func != NULL)
-		(*(mip->mii_func))(mii_reg, dev);
-
-	mii_head = mip->mii_next;
-	mip->mii_next = mii_free;
-	mii_free = mip;
-
-	if ((mip = mii_head) != NULL) {
-		ep->fec_mii_data = mip->mii_regval;
-
-	}
-}
-
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fec_enet_private *fep;
-	unsigned long	flags;
-	mii_list_t	*mip;
-	int		retval;
-
-	/* Add PHY address to register command.
-	*/
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	/* lock while modifying mii_list */
-	spin_lock_irqsave(&fep->lock, flags);
-
-	if ((mip = mii_free) != NULL) {
-		mii_free = mip->mii_next;
-		mip->mii_regval = regval;
-		mip->mii_func = func;
-		mip->mii_next = NULL;
-		if (mii_head) {
-			mii_tail->mii_next = mip;
-			mii_tail = mip;
-		} else {
-			mii_head = mii_tail = mip;
-			(&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval;
-		}
-	} else {
-		retval = 1;
-	}
-
-	spin_unlock_irqrestore(&fep->lock, flags);
-
-	return(retval);
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & 0x0004)
-		*s |= PHY_STAT_LINK;
-	if (mii_reg & 0x0010)
-		*s |= PHY_STAT_FAULT;
-	if (mii_reg & 0x0020)
-		*s |= PHY_STAT_ANC;
-
-	fep->link = (*s & PHY_STAT_LINK) ? 1 : 0;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & 0x1000)
-		*s |= PHY_CONF_ANE;
-	if (mii_reg & 0x4000)
-		*s |= PHY_CONF_LOOP;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & 0x0020)
-		*s |= PHY_CONF_10HDX;
-	if (mii_reg & 0x0040)
-		*s |= PHY_CONF_10FDX;
-	if (mii_reg & 0x0080)
-		*s |= PHY_CONF_100HDX;
-	if (mii_reg & 0x00100)
-		*s |= PHY_CONF_100FDX;
-}
-#if 0
-static void mii_disp_reg(uint mii_reg, struct net_device *dev)
-{
-	printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff);
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FEC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_REG_ANAR, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FEC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		*s |= PHY_STAT_FAULT;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-
-		/* Somehow does the 971 tell me that the link is down
-		 * the first read after power-up.
-		 * read here to get a valid value in ack_int */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FEC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: *s |= PHY_STAT_10HDX; break;
-	case 2: *s |= PHY_STAT_100HDX; break;
-	case 5: *s |= PHY_STAT_10FDX; break;
-	case 6: *s |= PHY_STAT_100FDX; break;
-	}
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_REG_ANER), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_QS6612 */
-
-/* ------------------------------------------------------------------------- */
-/* The Advanced Micro Devices AM79C874 is used on the ICU862		     */
-
-#ifdef CONFIG_FEC_AM79C874
-
-/* register definitions for the 79C874 */
-
-#define MII_AM79C874_MFR	16  /* Miscellaneous Features Register      */
-#define MII_AM79C874_ICSR	17  /* Interrupt Control/Status Register    */
-#define MII_AM79C874_DR		18  /* Diagnostic Register		    */
-#define MII_AM79C874_PMLR	19  /* Power Management & Loopback Register */
-#define MII_AM79C874_MCR	21  /* Mode Control Register		    */
-#define MII_AM79C874_DC		23  /* Disconnect Counter		    */
-#define MII_AM79C874_REC	24  /* Receiver Error Counter		    */
-
-static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data)
-{
-	volatile struct fec_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	/* Register 18: Bit 10 is data rate, 11 is Duplex */
-	switch ((mii_reg >> 10) & 3) {
-	case 0:	s |= PHY_STAT_10HDX;	break;
-	case 1:	s |= PHY_STAT_100HDX;	break;
-	case 2:	s |= PHY_STAT_10FDX;	break;
-	case 3:	s |= PHY_STAT_100FDX;	break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_amd79c874 = {
-	0x00022561,
-	"AM79C874",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr },
-
-		/* we only need to read ICSR to acknowledge */
-
-		{ mk_mii_read(MII_AM79C874_ICSR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_AM79C874 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FEC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FEC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FEC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FEC_AM79C874
-	&phy_info_amd79c874,
-#endif /* CONFIG_FEC_AM79C874 */
-
-	NULL
-};
-
-static void mii_display_status(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(*s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
-		case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (*s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (*s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	volatile uint *s = &(fep->phy_status);
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (*s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (*s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (*s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (*s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (*s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(*s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (*s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	int duplex;
-
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-	mii_display_status(dev);
-	fep->old_link = fep->link;
-
-	if (fep->link) {
-		duplex = 0;
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fec_restart(dev, duplex);
-	}
-	else
-		fec_stop(dev);
-
-#if 0
-	enable_irq(fep->mii_irq);
-#endif
-
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_relink);
-	schedule_work(&fep->phy_task);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_display_config);
-	schedule_work(&fep->phy_task);
-}
-
-
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if(phy_info[i]->id == (fep->phy_id >> 4))
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder.
-		*/
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-/* This interrupt occurs when the PHY detects a link change.
-*/
-static
-#ifdef CONFIG_RPXCLASSIC
-void mii_link_interrupt(void *dev_id)
-#else
-irqreturn_t mii_link_interrupt(int irq, void * dev_id)
-#endif
-{
-#ifdef	CONFIG_USE_MDIO
-	struct	net_device *dev = dev_id;
-	struct fec_enet_private *fep = dev->priv;
-	volatile immap_t *immap = (immap_t *)IMAP_ADDR;
-	volatile fec_t *fecp = &(immap->im_cpm.cp_fec);
-	unsigned int ecntrl = fecp->fec_ecntrl;
-
-	/* We need the FEC enabled to access the MII
-	*/
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN;
-	}
-#endif	/* CONFIG_USE_MDIO */
-
-#if 0
-	disable_irq(fep->mii_irq);  /* disable now, enable later */
-#endif
-
-
-#ifdef	CONFIG_USE_MDIO
-	mii_do_cmd(dev, fep->phy->ack_int);
-	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
-
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
-	}
-#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-
-#ifndef CONFIG_RPXCLASSIC
-	return IRQ_RETVAL(IRQ_HANDLED);
-#endif	/* CONFIG_RPXCLASSIC */
-}
-
-static int
-fec_enet_open(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	netif_start_queue(dev);
-	return 0;	/* Success */
-#endif	/* CONFIG_USE_MDIO */
-
-}
-
-static int
-fec_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-	fec_stop(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
-	struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv;
-
-	return &fep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t *ep;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-
-	if (dev->flags&IFF_PROMISC) {
-
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		ep->fec_r_cntrl |= FEC_RCNTRL_PROM;
-	} else {
-
-		ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fec_hash_table_high = 0xffffffff;
-			ep->fec_hash_table_low = 0xffffffff;
-		}
-#if 0
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-#endif
-	}
-}
-
-/* Initialize the FEC Ethernet on 860T.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fec_enet_private *fep;
-	int i, j, k, err;
-	unsigned char	*eap, *iap, *ba;
-	dma_addr_t	mem_addr;
-	volatile	cbd_t	*bdp;
-	cbd_t		*cbd_base;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	bd_t		*bd;
-#ifdef CONFIG_SCC_ENET
-	unsigned char	tmpaddr[6];
-#endif
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*fep));
-	if (!dev)
-		return -ENOMEM;
-
-	fep = dev->priv;
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set the Ethernet address.  If using multiple Enets on the 8xx,
-	 * this needs some work to get unique addresses.
-	 */
-	eap = (unsigned char *)my_enet_addr;
-	iap = bd->bi_enetaddr;
-
-#ifdef CONFIG_SCC_ENET
-	/*
-         * If a board has Ethernet configured both on a SCC and the
-         * FEC, it needs (at least) 2 MAC addresses (we know that Sun
-         * disagrees, but anyway). For the FEC port, we create
-         * another address by setting one of the address bits above
-         * something that would have (up to now) been allocated.
-	 */
-	for (i=0; i<6; i++)
-		tmpaddr[i] = *iap++;
-	tmpaddr[3] |= 0x80;
-	iap = tmpaddr;
-#endif
-
-	for (i=0; i<6; i++) {
-		dev->dev_addr[i] = *eap++ = *iap++;
-	}
-
-	/* Allocate memory for buffer descriptors.
-	*/
-	if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
-		printk("FEC init error.  Need more space.\n");
-		printk("FEC initialization failed.\n");
-		return 1;
-	}
-	cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
-					       &mem_addr, GFP_KERNEL);
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fep->rx_bd_base = cbd_base;
-	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-
-	fep->skb_cur = fep->skb_dirty = 0;
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	k = 0;
-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
-							 PAGE_SIZE,
-							 &mem_addr,
-							 GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
-			bdp->cbd_bufaddr = mem_addr;
-			fep->rx_vaddr[k++] = ba;
-			mem_addr += FEC_ENET_RX_FRSIZE;
-			ba += FEC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	fep->ph_lock = 0;
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-#endif
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
-		panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
-	/* Make Port C, bit 15 an input that causes interrupts.
-	*/
-	immap->im_ioport.iop_pcpar &= ~0x0001;
-	immap->im_ioport.iop_pcdir &= ~0x0001;
-	immap->im_ioport.iop_pcso  &= ~0x0001;
-	immap->im_ioport.iop_pcint |=  0x0001;
-	cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
-	/* Make LEDS reflect Link status.
-	*/
-	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-
-#ifdef PHY_INTERRUPT
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
-		(0x80000000 >> PHY_INTERRUPT);
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
-		panic("Could not allocate MII IRQ!");
-#endif
-
-	dev->base_addr = (unsigned long)fecp;
-
-	/* The FEC Ethernet specific entries in the device structure. */
-	dev->open = fec_enet_open;
-	dev->hard_start_xmit = fec_enet_start_xmit;
-	dev->tx_timeout = fec_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = fec_enet_close;
-	dev->get_stats = fec_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-#ifdef	CONFIG_USE_MDIO
-	for (i=0; i<NMII-1; i++)
-		mii_cmds[i].mii_next = &mii_cmds[i+1];
-	mii_free = mii_cmds;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure all of port D for MII.
-	*/
-	immap->im_ioport.iop_pdpar = 0x1fff;
-
-	/* Bits moved from Rev. D onward.
-	*/
-	if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501)
-		immap->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
-	else
-		immap->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed to 2.5 MHz
-	*/
-	fecp->fec_mii_speed = fep->phy_speed =
-		(( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1;
-#else
-	fecp->fec_mii_speed = 0;	/* turn off MDIO */
-#endif	/* CONFIG_USE_MDIO */
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk ("%s: FEC ENET Version 0.2, FEC irq %d"
-#ifdef PHY_INTERRUPT
-		", MII irq %d"
-#endif
-		", addr ",
-		dev->name, FEC_INTERRUPT
-#ifdef PHY_INTERRUPT
-		, PHY_INTERRUPT
-#endif
-	);
-	for (i=0; i<6; i++)
-		printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':');
-
-#ifdef	CONFIG_USE_MDIO	/* start in full duplex mode, and negotiate speed */
-	fec_restart (dev, 1);
-#else			/* always use half duplex mode only */
-	fec_restart (dev, 0);
-#endif
-
-#ifdef	CONFIG_USE_MDIO
-	/* Queue up command to detect the PHY and initialize the
-	 * remainder of the interface.
-	 */
-	fep->phy_id_done = 0;
-	fep->phy_addr = 0;
-	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
-#endif	/* CONFIG_USE_MDIO */
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* This function is called to start or restart the FEC during a link
- * change.  This only happens when switching between half and full
- * duplex.
- */
-static void
-fec_restart(struct net_device *dev, int duplex)
-{
-	struct fec_enet_private *fep;
-	int i;
-	volatile	cbd_t	*bdp;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	fep = dev->priv;
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set station address.
-	*/
-	fecp->fec_addr_low  = (my_enet_addr[0] << 16) | my_enet_addr[1];
-	fecp->fec_addr_high =  my_enet_addr[2];
-
-	/* Reset all multicast.
-	*/
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low  = 0;
-
-	/* Set maximum receive buffer size.
-	*/
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-	fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base));
-	fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base));
-
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->cur_rx = fep->rx_bd_base;
-
-	/* Reset SKB transmit buffers.
-	*/
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	for (i=0; i<RX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = BD_ENET_RX_EMPTY;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmit.
-	*/
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Enable MII mode.
-	*/
-	if (duplex) {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;	/* MII enable */
-		fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;		/* FD enable */
-	}
-	else {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
-		fecp->fec_x_cntrl = 0;
-	}
-	fep->full_duplex = duplex;
-
-	/* Enable big endian and don't care about SDMA FC.
-	*/
-	fecp->fec_fun_code = 0x78000000;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Clear any outstanding interrupt.
-	*/
-	fecp->fec_ievent = 0xffc0;
-
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-
-	/* Enable interrupts we wish to service.
-	*/
-	fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
-			    FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-	fecp->fec_r_des_active = 0x01000000;
-}
-
-static void
-fec_stop(struct net_device *dev)
-{
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	struct fec_enet_private *fep;
-	int i;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0)
-		return;	/* already down */
-
-	fep = dev->priv;
-
-
-	fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
-
-	for (i = 0;
-	     ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC timeout on graceful transmit stop\n");
-	}
-
-	/* Clear outstanding MII command interrupts.
-	*/
-	fecp->fec_ievent = FEC_ENET_MII;
-
-	/* Enable MII command finished interrupt
-	*/
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-	fecp->fec_imask = FEC_ENET_MII;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Disable FEC
-	*/
-	fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN);
-}
diff --git a/arch/ppc/8xx_io/micropatch.c b/arch/ppc/8xx_io/micropatch.c
deleted file mode 100644
index 9a5d95da7c28..000000000000
--- a/arch/ppc/8xx_io/micropatch.c
+++ /dev/null
@@ -1,743 +0,0 @@
-
-/* Microcode patches for the CPM as supplied by Motorola.
- * This is the one for IIC/SPI.  There is a newer one that
- * also relocates SMC2, but this would require additional changes
- * to uart.c, so I am holding off on that for a moment.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-
-/*
- * I2C/SPI relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7FFFEFD9,
-	0x3FFD0000,
-	0x7FFB49F7,
-	0x7FF90000,
-	0x5FEFADF7,
-	0x5F89ADF7,
-	0x5FEFAFF7,
-	0x5F89AFF7,
-	0x3A9CFBC8,
-	0xE7C0EDF0,
-	0x77C1E1BB,
-	0xF4DC7F1D,
-	0xABAD932F,
-	0x4E08FDCF,
-	0x6E0FAFF8,
-	0x7CCF76CF,
-	0xFD1FF9CF,
-	0xABF88DC6,
-	0xAB5679F7,
-	0xB0937383,
-	0xDFCE79F7,
-	0xB091E6BB,
-	0xE5BBE74F,
-	0xB3FA6F0F,
-	0x6FFB76CE,
-	0xEE0DF9CF,
-	0x2BFBEFEF,
-	0xCFEEF9CF,
-	0x76CEAD24,
-	0x90B2DF9A,
-	0x7FDDD0BF,
-	0x4BF847FD,
-	0x7CCF76CE,
-	0xCFEF7E1F,
-	0x7F1D7DFD,
-	0xF0B6EF71,
-	0x7FC177C1,
-	0xFBC86079,
-	0xE722FBC8,
-	0x5FFFDFFF,
-	0x5FB2FFFB,
-	0xFBC8F3C8,
-	0x94A67F01,
-	0x7F1D5F39,
-	0xAFE85F5E,
-	0xFFDFDF96,
-	0xCB9FAF7D,
-	0x5FC1AFED,
-	0x8C1C5FC1,
-	0xAFDD5FC3,
-	0xDF9A7EFD,
-	0xB0B25FB2,
-	0xFFFEABAD,
-	0x5FB2FFFE,
-	0x5FCE600B,
-	0xE6BB600B,
-	0x5FCEDFC6,
-	0x27FBEFDF,
-	0x5FC8CFDE,
-	0x3A9CE7C0,
-	0xEDF0F3C8,
-	0x7F0154CD,
-	0x7F1D2D3D,
-	0x363A7570,
-	0x7E0AF1CE,
-	0x37EF2E68,
-	0x7FEE10EC,
-	0xADF8EFDE,
-	0xCFEAE52F,
-	0x7D0FE12B,
-	0xF1CE5F65,
-	0x7E0A4DF8,
-	0xCFEA5F72,
-	0x7D0BEFEE,
-	0xCFEA5F74,
-	0xE522EFDE,
-	0x5F74CFDA,
-	0x0B627385,
-	0xDF627E0A,
-	0x30D8145B,
-	0xBFFFF3C8,
-	0x5FFFDFFF,
-	0xA7F85F5E,
-	0xBFFE7F7D,
-	0x10D31450,
-	0x5F36BFFF,
-	0xAF785F5E,
-	0xBFFDA7F8,
-	0x5F36BFFE,
-	0x77FD30C0,
-	0x4E08FDCF,
-	0xE5FF6E0F,
-	0xAFF87E1F,
-	0x7E0FFD1F,
-	0xF1CF5F1B,
-	0xABF80D5E,
-	0x5F5EFFEF,
-	0x79F730A2,
-	0xAFDD5F34,
-	0x47F85F34,
-	0xAFED7FDD,
-	0x50B24978,
-	0x47FD7F1D,
-	0x7DFD70AD,
-	0xEF717EC1,
-	0x6BA47F01,
-	0x2D267EFD,
-	0x30DE5F5E,
-	0xFFFD5F5E,
-	0xFFEF5F5E,
-	0xFFDF0CA0,
-	0xAFED0A9E,
-	0xAFDD0C3A,
-	0x5F3AAFBD,
-	0x7FBDB082,
-	0x5F8247F8
-};
-
-uint patch_2f00[] = {
-	0x3E303430,
-	0x34343737,
-	0xABF7BF9B,
-	0x994B4FBD,
-	0xBD599493,
-	0x349FFF37,
-	0xFB9B177D,
-	0xD9936956,
-	0xBBFDD697,
-	0xBDD2FD11,
-	0x31DB9BB3,
-	0x63139637,
-	0x93733693,
-	0x193137F7,
-	0x331737AF,
-	0x7BB9B999,
-	0xBB197957,
-	0x7FDFD3D5,
-	0x73B773F7,
-	0x37933B99,
-	0x1D115316,
-	0x99315315,
-	0x31694BF4,
-	0xFBDBD359,
-	0x31497353,
-	0x76956D69,
-	0x7B9D9693,
-	0x13131979,
-	0x79376935
-};
-#endif
-
-/*
- * I2C/SPI/SMC1 relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x3fff0000,
-	0x3ffd0000,
-	0x3ffb0000,
-	0x3ff90000,
-	0x5f13eff8,
-	0x5eb5eff8,
-	0x5f88adf7,
-	0x5fefadf7,
-	0x3a9cfbc8,
-	0x77cae1bb,
-	0xf4de7fad,
-	0xabae9330,
-	0x4e08fdcf,
-	0x6e0faff8,
-	0x7ccf76cf,
-	0xfdaff9cf,
-	0xabf88dc8,
-	0xab5879f7,
-	0xb0925d8d,
-	0xdfd079f7,
-	0xb090e6bb,
-	0xe5bbe74f,
-	0x9e046f0f,
-	0x6ffb76ce,
-	0xee0cf9cf,
-	0x2bfbefef,
-	0xcfeef9cf,
-	0x76cead23,
-	0x90b3df99,
-	0x7fddd0c1,
-	0x4bf847fd,
-	0x7ccf76ce,
-	0xcfef77ca,
-	0x7eaf7fad,
-	0x7dfdf0b7,
-	0xef7a7fca,
-	0x77cafbc8,
-	0x6079e722,
-	0xfbc85fff,
-	0xdfff5fb3,
-	0xfffbfbc8,
-	0xf3c894a5,
-	0xe7c9edf9,
-	0x7f9a7fad,
-	0x5f36afe8,
-	0x5f5bffdf,
-	0xdf95cb9e,
-	0xaf7d5fc3,
-	0xafed8c1b,
-	0x5fc3afdd,
-	0x5fc5df99,
-	0x7efdb0b3,
-	0x5fb3fffe,
-	0xabae5fb3,
-	0xfffe5fd0,
-	0x600be6bb,
-	0x600b5fd0,
-	0xdfc827fb,
-	0xefdf5fca,
-	0xcfde3a9c,
-	0xe7c9edf9,
-	0xf3c87f9e,
-	0x54ca7fed,
-	0x2d3a3637,
-	0x756f7e9a,
-	0xf1ce37ef,
-	0x2e677fee,
-	0x10ebadf8,
-	0xefdecfea,
-	0xe52f7d9f,
-	0xe12bf1ce,
-	0x5f647e9a,
-	0x4df8cfea,
-	0x5f717d9b,
-	0xefeecfea,
-	0x5f73e522,
-	0xefde5f73,
-	0xcfda0b61,
-	0x5d8fdf61,
-	0xe7c9edf9,
-	0x7e9a30d5,
-	0x1458bfff,
-	0xf3c85fff,
-	0xdfffa7f8,
-	0x5f5bbffe,
-	0x7f7d10d0,
-	0x144d5f33,
-	0xbfffaf78,
-	0x5f5bbffd,
-	0xa7f85f33,
-	0xbffe77fd,
-	0x30bd4e08,
-	0xfdcfe5ff,
-	0x6e0faff8,
-	0x7eef7e9f,
-	0xfdeff1cf,
-	0x5f17abf8,
-	0x0d5b5f5b,
-	0xffef79f7,
-	0x309eafdd,
-	0x5f3147f8,
-	0x5f31afed,
-	0x7fdd50af,
-	0x497847fd,
-	0x7f9e7fed,
-	0x7dfd70a9,
-	0xef7e7ece,
-	0x6ba07f9e,
-	0x2d227efd,
-	0x30db5f5b,
-	0xfffd5f5b,
-	0xffef5f5b,
-	0xffdf0c9c,
-	0xafed0a9a,
-	0xafdd0c37,
-	0x5f37afbd,
-	0x7fbdb081,
-	0x5f8147f8,
-	0x3a11e710,
-	0xedf0ccdd,
-	0xf3186d0a,
-	0x7f0e5f06,
-	0x7fedbb38,
-	0x3afe7468,
-	0x7fedf4fc,
-	0x8ffbb951,
-	0xb85f77fd,
-	0xb0df5ddd,
-	0xdefe7fed,
-	0x90e1e74d,
-	0x6f0dcbf7,
-	0xe7decfed,
-	0xcb74cfed,
-	0xcfeddf6d,
-	0x91714f74,
-	0x5dd2deef,
-	0x9e04e7df,
-	0xefbb6ffb,
-	0xe7ef7f0e,
-	0x9e097fed,
-	0xebdbeffa,
-	0xeb54affb,
-	0x7fea90d7,
-	0x7e0cf0c3,
-	0xbffff318,
-	0x5fffdfff,
-	0xac59efea,
-	0x7fce1ee5,
-	0xe2ff5ee1,
-	0xaffbe2ff,
-	0x5ee3affb,
-	0xf9cc7d0f,
-	0xaef8770f,
-	0x7d0fb0c6,
-	0xeffbbfff,
-	0xcfef5ede,
-	0x7d0fbfff,
-	0x5ede4cf8,
-	0x7fddd0bf,
-	0x49f847fd,
-	0x7efdf0bb,
-	0x7fedfffd,
-	0x7dfdf0b7,
-	0xef7e7e1e,
-	0x5ede7f0e,
-	0x3a11e710,
-	0xedf0ccab,
-	0xfb18ad2e,
-	0x1ea9bbb8,
-	0x74283b7e,
-	0x73c2e4bb,
-	0x2ada4fb8,
-	0xdc21e4bb,
-	0xb2a1ffbf,
-	0x5e2c43f8,
-	0xfc87e1bb,
-	0xe74ffd91,
-	0x6f0f4fe8,
-	0xc7ba32e2,
-	0xf396efeb,
-	0x600b4f78,
-	0xe5bb760b,
-	0x53acaef8,
-	0x4ef88b0e,
-	0xcfef9e09,
-	0xabf8751f,
-	0xefef5bac,
-	0x741f4fe8,
-	0x751e760d,
-	0x7fdbf081,
-	0x741cafce,
-	0xefcc7fce,
-	0x751e70ac,
-	0x741ce7bb,
-	0x3372cfed,
-	0xafdbefeb,
-	0xe5bb760b,
-	0x53f2aef8,
-	0xafe8e7eb,
-	0x4bf8771e,
-	0x7e247fed,
-	0x4fcbe2cc,
-	0x7fbc30a9,
-	0x7b0f7a0f,
-	0x34d577fd,
-	0x308b5db7,
-	0xde553e5f,
-	0xaf78741f,
-	0x741f30f0,
-	0xcfef5e2c,
-	0x741f3eac,
-	0xafb8771e,
-	0x5e677fed,
-	0x0bd3e2cc,
-	0x741ccfec,
-	0xe5ca53cd,
-	0x6fcb4f74,
-	0x5dadde4b,
-	0x2ab63d38,
-	0x4bb3de30,
-	0x751f741c,
-	0x6c42effa,
-	0xefea7fce,
-	0x6ffc30be,
-	0xefec3fca,
-	0x30b3de2e,
-	0xadf85d9e,
-	0xaf7daefd,
-	0x5d9ede2e,
-	0x5d9eafdd,
-	0x761f10ac,
-	0x1da07efd,
-	0x30adfffe,
-	0x4908fb18,
-	0x5fffdfff,
-	0xafbb709b,
-	0x4ef85e67,
-	0xadf814ad,
-	0x7a0f70ad,
-	0xcfef50ad,
-	0x7a0fde30,
-	0x5da0afed,
-	0x3c12780f,
-	0xefef780f,
-	0xefef790f,
-	0xa7f85e0f,
-	0xffef790f,
-	0xefef790f,
-	0x14adde2e,
-	0x5d9eadfd,
-	0x5e2dfffb,
-	0xe79addfd,
-	0xeff96079,
-	0x607ae79a,
-	0xddfceff9,
-	0x60795dff,
-	0x607acfef,
-	0xefefefdf,
-	0xefbfef7f,
-	0xeeffedff,
-	0xebffe7ff,
-	0xafefafdf,
-	0xafbfaf7f,
-	0xaeffadff,
-	0xabffa7ff,
-	0x6fef6fdf,
-	0x6fbf6f7f,
-	0x6eff6dff,
-	0x6bff67ff,
-	0x2fef2fdf,
-	0x2fbf2f7f,
-	0x2eff2dff,
-	0x2bff27ff,
-	0x4e08fd1f,
-	0xe5ff6e0f,
-	0xaff87eef,
-	0x7e0ffdef,
-	0xf11f6079,
-	0xabf8f542,
-	0x7e0af11c,
-	0x37cfae3a,
-	0x7fec90be,
-	0xadf8efdc,
-	0xcfeae52f,
-	0x7d0fe12b,
-	0xf11c6079,
-	0x7e0a4df8,
-	0xcfea5dc4,
-	0x7d0befec,
-	0xcfea5dc6,
-	0xe522efdc,
-	0x5dc6cfda,
-	0x4e08fd1f,
-	0x6e0faff8,
-	0x7c1f761f,
-	0xfdeff91f,
-	0x6079abf8,
-	0x761cee24,
-	0xf91f2bfb,
-	0xefefcfec,
-	0xf91f6079,
-	0x761c27fb,
-	0xefdf5da7,
-	0xcfdc7fdd,
-	0xd09c4bf8,
-	0x47fd7c1f,
-	0x761ccfcf,
-	0x7eef7fed,
-	0x7dfdf093,
-	0xef7e7f1e,
-	0x771efb18,
-	0x6079e722,
-	0xe6bbe5bb,
-	0xae0ae5bb,
-	0x600bae85,
-	0xe2bbe2bb,
-	0xe2bbe2bb,
-	0xaf02e2bb,
-	0xe2bb2ff9,
-	0x6079e2bb
-};
-
-uint patch_2f00[] = {
-	0x30303030,
-	0x3e3e3434,
-	0xabbf9b99,
-	0x4b4fbdbd,
-	0x59949334,
-	0x9fff37fb,
-	0x9b177dd9,
-	0x936956bb,
-	0xfbdd697b,
-	0xdd2fd113,
-	0x1db9f7bb,
-	0x36313963,
-	0x79373369,
-	0x3193137f,
-	0x7331737a,
-	0xf7bb9b99,
-	0x9bb19795,
-	0x77fdfd3d,
-	0x573b773f,
-	0x737933f7,
-	0xb991d115,
-	0x31699315,
-	0x31531694,
-	0xbf4fbdbd,
-	0x35931497,
-	0x35376956,
-	0xbd697b9d,
-	0x96931313,
-	0x19797937,
-	0x6935af78,
-	0xb9b3baa3,
-	0xb8788683,
-	0x368f78f7,
-	0x87778733,
-	0x3ffffb3b,
-	0x8e8f78b8,
-	0x1d118e13,
-	0xf3ff3f8b,
-	0x6bd8e173,
-	0xd1366856,
-	0x68d1687b,
-	0x3daf78b8,
-	0x3a3a3f87,
-	0x8f81378f,
-	0xf876f887,
-	0x77fd8778,
-	0x737de8d6,
-	0xbbf8bfff,
-	0xd8df87f7,
-	0xfd876f7b,
-	0x8bfff8bd,
-	0x8683387d,
-	0xb873d87b,
-	0x3b8fd7f8,
-	0xf7338883,
-	0xbb8ee1f8,
-	0xef837377,
-	0x3337b836,
-	0x817d11f8,
-	0x7378b878,
-	0xd3368b7d,
-	0xed731b7d,
-	0x833731f3,
-	0xf22f3f23
-};
-
-uint patch_2e00[] = {
-	0x27eeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xee4bf4fb,
-	0xdbd259bb,
-	0x1979577f,
-	0xdfd2d573,
-	0xb773f737,
-	0x4b4fbdbd,
-	0x25b9b177,
-	0xd2d17376,
-	0x956bbfdd,
-	0x697bdd2f,
-	0xff9f79ff,
-	0xff9ff22f
-};
-#endif
-
-/*
- *  USB SOF patch arrays.
- */
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7fff0000,
-	0x7ffd0000,
-	0x7ffb0000,
-	0x49f7ba5b,
-	0xba383ffb,
-	0xf9b8b46d,
-	0xe5ab4e07,
-	0xaf77bffe,
-	0x3f7bbf79,
-	0xba5bba38,
-	0xe7676076,
-	0x60750000
-};
-
-uint patch_2f00[] = {
-	0x3030304c,
-	0xcab9e441,
-	0xa1aaf220
-};
-#endif
-
-void
-cpm_load_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;		/* Dual-ported RAM. */
-	volatile cpm8xx_t	*commproc;
-	volatile iic_t		*iip;
-	volatile spi_t		*spp;
-	volatile smc_uart_t	*smp;
-	int	i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	commproc->cp_rccr = 0x0009;
-
-	printk("USB SOF microcode patch installed\n");
-#endif /* CONFIG_USB_SOF_UCODE_PATCH */
-
-#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
-    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-# define RPBASE 0x0500
-	iip->iic_rpbase = RPBASE;
-
-	/* Put SPI above the IIC, also 32-byte aligned.
-	*/
-	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
-
-# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
-	commproc->cp_cpmcr1 = 0x802a;
-	commproc->cp_cpmcr2 = 0x8028;
-	commproc->cp_cpmcr3 = 0x802e;
-	commproc->cp_cpmcr4 = 0x802c;
-	commproc->cp_rccr = 1;
-
-	printk("I2C/SPI microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
-
-# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0e00]);
-	for (i=0; i<(sizeof(patch_2e00)/4); i++)
-		*dp++ = patch_2e00[i];
-
-	commproc->cp_cpmcr1 = 0x8080;
-	commproc->cp_cpmcr2 = 0x808a;
-	commproc->cp_cpmcr3 = 0x8028;
-	commproc->cp_cpmcr4 = 0x802a;
-	commproc->cp_rccr = 3;
-
-	smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
-	smp->smc_rpbase = 0x1FC0;
-
-	printk("I2C/SPI/SMC1 microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
-
-#endif /* some variation of the I2C/SPI patch was selected */
-}
-
-/*
- *  Take this entire routine out, since no one calls it and its 
- * logic is suspect.
- */
-
-#if 0
-void
-verify_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;
-	volatile cpm8xx_t	*commproc;
-	int i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-	printk("cp_rccr %x\n", commproc->cp_rccr);
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		if (*dp++ != patch_2000[i]) {
-			printk("patch_2000 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2000[i]);
-			break;
-		}
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		if (*dp++ != patch_2f00[i]) {
-			printk("patch_2f00 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2f00[i]);
-			break;
-		}
-
-	commproc->cp_rccr = 0x0009;
-}
-#endif
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
deleted file mode 100644
index 0f1863ed9c1c..000000000000
--- a/arch/ppc/Kconfig
+++ /dev/null
@@ -1,1186 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/PowerPC Kernel Configuration"
-
-config WORD_SIZE
-	int
-	default 32
-
-config MMU
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config PPC
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_KPROBES
-
-config PPC32
-	bool
-	default y
-
-# All PPCs use generic nvram driver through ppc_md
-config GENERIC_NVRAM
-	bool
-	default y
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-source "init/Kconfig"
-
-menu "Processor"
-
-choice
-	prompt "Processor Type"
-	default 6xx
-
-config 6xx
-	bool "6xx/7xx/74xx/52xx/82xx"
-	select PPC_FPU
-	help
-	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the older Freescale
-	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
-	  52xx, 82xx), the IBM embedded versions (403 and 405) and
-	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
-	  For support for 64-bit processors, set ARCH=powerpc.
-	  Unless you are building a kernel for one of the embedded processor
-	  systems, choose 6xx.
-	  Also note that because the 52xx, 82xx family have a 603e
-	  core, specific support for that chipset is asked later on.
-
-config 40x
-	bool "40x"
-	select PPC_DCR_NATIVE
-
-config 44x
-	bool "44x"
-	select PPC_DCR_NATIVE
-
-config 8xx
-	bool "8xx"
-	select PPC_LIB_RHEAP
-
-endchoice
-
-config PPC_FPU
-	bool
-
-config PPC_DCR_NATIVE
-	bool
-	default n
-
-config PPC_DCR
-	bool
-	depends on PPC_DCR_NATIVE
-	default y
-
-config PTE_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-
-config PHYS_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-	---help---
-	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
-
-	  If in doubt, say N here.
-
-config ALTIVEC
-	bool "AltiVec Support"
-	depends on 6xx
-	depends on !8260
-	---help---
-	  This option enables kernel support for the Altivec extensions to the
-	  PowerPC processor. The kernel currently supports saving and restoring
-	  altivec registers, and turning on the 'altivec enable' bit so user
-	  processes can execute altivec instructions.
-
-	  This option is only usefully if you have a processor that supports
-	  altivec (G4, otherwise known as 74xx series), but does not have
-	  any affect on a non-altivec cpu (it does, however add code to the
-	  kernel).
-
-	  If in doubt, say Y here.
-
-config TAU
-	bool "Thermal Management Support"
-	depends on 6xx && !8260
-	help
-	  G3 and G4 processors have an on-chip temperature sensor called the
-	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-	  temperature within 2-4 degrees Celsius. This option shows the current
-	  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in some cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
-	depends on TAU
-	---help---
-	  The TAU supports an interrupt driven mode which causes an interrupt
-	  whenever the temperature goes out of range. This is the fastest way
-	  to get notified the temp has exceeded a range. With this option off,
-	  a timer is used to re-check the temperature periodically.
-
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
-
-config TAU_AVERAGE
-	bool "Average high and low temp"
-	depends on TAU
-	---help---
-	  The TAU hardware can compare the temperature to an upper and lower
-	  bound.  The default behavior is to show both the upper and lower
-	  bound in /proc/cpuinfo. If the range is large, the temperature is
-	  either changing a lot, or the TAU hardware is broken (likely on some
-	  G4's). If the range is small (around 4 degrees), the temperature is
-	  relatively stable.  If you say Y here, a single temperature value,
-	  halfway between the upper and lower bounds, will be reported in
-	  /proc/cpuinfo.
-
-	  If in doubt, say N here.
-
-config MATH_EMULATION
-	bool "Math emulation"
-	depends on 4xx || 8xx
-	---help---
-	  Some PowerPC chips designed for embedded applications do not have
-	  a floating-point unit and therefore do not implement the
-	  floating-point instructions in the PowerPC instruction set.  If you
-	  say Y here, the kernel will include code to emulate a floating-point
-	  unit, which will allow programs that use floating-point
-	  instructions to run.
-
-	  If you have an Apple machine or an IBM RS/6000 or pSeries machine,
-	  or any machine with a 6xx, 7xx or 7xxx series processor, say N
-	  here.  Saying Y here will not hurt performance (on any machine) but
-	  will increase the size of the kernel.
-
-config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-	  In the GameCube implementation, kexec allows you to load and
-	  run DOL files, including kernel and homebrew DOLs.
-
-source "drivers/cpufreq/Kconfig"
-
-config PPC601_SYNC_FIX
-	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && PPC_PREP
-	help
-	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-	  mean that extra synchronization instructions are required near
-	  certain instructions, typically those that make major changes to the
-	  CPU state.  These extra instructions reduce performance slightly.
-	  If you say N here, these extra instructions will not be included,
-	  resulting in a kernel which will run faster but may not run at all
-	  on some systems with the PPC601 chip.
-
-	  If in doubt, say Y here.
-
-source arch/ppc/platforms/4xx/Kconfig
-
-config PPC_STD_MMU
-	bool
-	depends on 6xx
-	default y
-
-config NOT_COHERENT_CACHE
-	bool
-	depends on 4xx || 8xx
-	default y
-
-endmenu
-
-menu "Platform options"
-
-config FADS
-	bool
-
-choice
-	prompt "8xx Machine Type"
-	depends on 8xx
-	default RPXLITE
-
-config RPXLITE
-	bool "RPX-Lite"
-	---help---
-	  Single-board computers based around the PowerPC MPC8xx chips and
-	  intended for embedded applications.  The following types are
-	  supported:
-
-	  RPX-Lite:
-	  Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
-	  RPX-Classic:
-	  Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
-	  the MPC 860
-
-	  BSE-IP:
-	  Bright Star Engineering ip-Engine.
-
-	  TQM823L:
-	  TQM850L:
-	  TQM855L:
-	  TQM860L:
-	  MPC8xx based family of mini modules, half credit card size,
-	  up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
-	  2 x CAN bus interface, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: October (?) 1999
-	  End of Life: not yet :-)
-	  URL:
-	  - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
-	  - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
-	  - images: <http://www.denx.de/embedded-ppc-en.html>
-
-	  FPS850L:
-	  FingerPrint Sensor System (based on TQM850L)
-	  Manufacturer: IKENDI AG, <http://www.ikendi.com/>
-	  Date of Release: November 1999
-	  End of life: end 2000 ?
-	  URL: see TQM850L
-
-	  IVMS8:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Small Version (8 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: December 2000 (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  IVML24:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Large Version (24 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: March 2001  (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  HERMES:
-	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
-	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
-	  <http://www.multidata.de/>
-	  Date of Release: 2000 (?)
-	  End of life: -
-	  URL: <http://www.multidata.de/english/products/hpro.htm>
-
-	  IP860:
-	  VMEBus IP (Industry Pack) carrier board with MPC860
-	  Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-	  Date of Release: ?
-	  End of life: -
-	  URL: <http://www.microsys.de/html/ip860.html>
-
-	  PCU_E:
-	  PCU = Peripheral Controller Unit, Extended
-	  Manufacturer: Siemens AG, ICN (Information and Communication Networks)
-	  	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-	  Date of Release: April 2001
-	  End of life: August 2001
-	  URL: n. a.
-
-config RPXCLASSIC
-	bool "RPX-Classic"
-	help
-	  The RPX-Classic is a single-board computer based on the Motorola
-	  MPC860.  It features 16MB of DRAM and a variable amount of flash,
-	  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
-	  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
-	  directly.
-
-config BSEIP
-	bool "BSE-IP"
-	help
-	  Say Y here to support the Bright Star Engineering ipEngine SBC.
-	  This is a credit-card-sized device featuring a MPC823 processor,
-	  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
-	  controller, and two RS232 ports.
-
-config MPC8XXFADS
-	bool "FADS"
-	select FADS
-
-config TQM823L
-	bool "TQM823L"
-	help
-	  Say Y here to support the TQM823L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
-	bool "TQM850L"
-	help
-	  Say Y here to support the TQM850L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
-	bool "TQM855L"
-	help
-	  Say Y here to support the TQM855L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
-	bool "TQM860L"
-	help
-	  Say Y here to support the TQM860L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
-	bool "FPS850L"
-
-config IVMS8
-	bool "IVMS8"
-	help
-	  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config IVML24
-	bool "IVML24"
-	help
-	  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config HERMES_PRO
-	bool "HERMES"
-
-config IP860
-	bool "IP860"
-
-config LWMON
-	bool "LWMON"
-
-config PCU_E
-	bool "PCU_E"
-
-config CCM
-	bool "CCM"
-
-config LANTEC
-	bool "LANTEC"
-
-config MBX
-	bool "MBX"
-	help
-	  MBX is a line of Motorola single-board computer based around the
-	  MPC821 and MPC860 processors, and intended for embedded-controller
-	  applications.  Say Y here to support these boards directly.
-
-config WINCEPT
-	bool "WinCept"
-	help
-	  The Wincept 100/110 is a Motorola single-board computer based on the
-	  MPC821 PowerPC, introduced in 1998 and designed to be used in
-	  thin-client machines.  Say Y to support it directly.
-
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 6xx
-	default PPC_PREP
-	---help---
-	  Linux currently supports several different kinds of PowerPC-based
-	  machines: Apple Power Macintoshes and clones (such as the Motorola
-	  Starmax series), PReP (PowerPC Reference Platform) machines (such
-	  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
-	  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
-	  Platform) machines (including all of the recent IBM RS/6000 and
-	  pSeries machines), and several embedded PowerPC systems containing
-	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP.
-
-	  Note that support for Apple and CHRP machines is now only available
-	  with ARCH=powerpc, and has been removed from this menu.  If you
-	  wish to build a kernel for an Apple or CHRP machine, exit this
-	  configuration process and re-run it with ARCH=powerpc.
-
-	  Select PReP if configuring for a PReP machine.
-
-config PPC_PREP
-	bool "PReP"
-
-config KATANA
-	bool "Artesyn-Katana"
-	help
-	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
-	  cPCI board.
-
-config WILLOW
-	bool "Cogent-Willow"
-
-config CPCI690
-	bool "Force-CPCI690"
-	help
-	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-	bool "Force-PowerPMC250"
-
-config CHESTNUT
-	bool "IBM 750FX Eval board or 750GX Eval board"
-	help
-	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-	  IBM 750GX Eval board.
-
-config SPRUCE
-	bool "IBM-Spruce"
-	select PPC_INDIRECT_PCI
-
-config HDPU
-	bool "Sky-HDPU"
-	help
-	  Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-	depends on HDPU
-	tristate "HDPU-Features"
-	help
-	  Select to enable HDPU enhanced features.
-
-config EV64260
-	bool "Marvell-EV64260BP"
-	help
-	  Select EV64260 if configuring a Marvell (formerly Galileo)
-	  EV64260BP Evaluation platform.
-
-config LOPEC
-	bool "Motorola-LoPEC"
-	select PPC_I8259
-
-config MVME5100
-	bool "Motorola-MVME5100"
-	select PPC_INDIRECT_PCI
-
-config PPLUS
-	bool "Motorola-PowerPlus"
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-
-config PRPMC750
-	bool "Motorola-PrPMC750"
-	select PPC_INDIRECT_PCI
-
-config PRPMC800
-	bool "Motorola-PrPMC800"
-	select PPC_INDIRECT_PCI
-
-config SANDPOINT
-	bool "Motorola-Sandpoint"
-	select PPC_I8259
-	help
-	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
-	  (any flavor).
-
-config RADSTONE_PPC7D
-	bool "Radstone Technology PPC7D board"
-	select PPC_I8259
-
-config PAL4
-	bool "SBS-Palomar4"
-
-config EST8260
-	bool "EST8260"
-	---help---
-	  The EST8260 is a single-board computer manufactured by Wind River
-	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-	  the MPC8260.  Wind River Systems has a website at
-	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
-	  and has probably been discontinued or rebadged.
-
-config SBC82xx
-	bool "SBC82xx"
-	---help---
-	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
-	  Manufacturer: Wind River Systems, Inc.
-	  Date of Release: May 2003
-	  End of Life: -
-	  URL: <http://www.windriver.com/>
-
-config SBS8260
-	bool "SBS8260"
-
-config RPX8260
-	bool "RPXSUPER"
-
-config TQM8260
-	bool "TQM8260"
-	---help---
-	  MPC8260 based module, little larger than credit card,
-	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-	  2 x serial ports, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: June 2001
-	  End of Life: not yet :-)
-	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config PQ2FADS
-	bool "Freescale-PQ2FADS"
-	help
-	  Select PQ2FADS if you wish to configure for a Freescale
-	  PQ2FADS board (-VR or -ZU).
-
-config LITE5200
-	bool "Freescale LITE5200 / (IceCube)"
-	select PPC_MPC52xx
-	help
-	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
-	  This is for the LITE5200 version 2.0 board. Don't know if it changes
-	  much but it's only been tested on this board version. I think this
-	  board is also known as IceCube.
-
-config LITE5200B
-	bool "Freescale LITE5200B"
-	depends on LITE5200
-	help
-	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
-	  This is the new board with 2 PCI slots.
-
-config EV64360
-	bool "Marvell-EV64360BP"
-	help
-	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
-	  platform.
-endchoice
-
-config TQM8xxL
-	bool
-	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-	default y
-
-config EMBEDDEDBOOT
-	bool
-	depends on 8xx || 8260
-	default y
-
-config PPC_MPC52xx
-	bool
-
-config 8260
-	bool "CPM2 Support" if WILLOW
-	depends on 6xx
-	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-	  this option means that you wish to build a kernel for a machine with
-	  an 8260 class CPU.
-
-config CPM1
-	bool
-	depends on 8xx
-	default y
-	help
-	  The CPM1 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM1 coprocessor
-	  on it (8xx, 827x, 8560).
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	select PPC_LIB_RHEAP
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-
-config PPC_GEN550
-	bool
-	depends on SANDPOINT || SPRUCE || PPLUS || \
-		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
-	default y
-
-config FORCE
-	bool
-	depends on 6xx && POWERPMC250
-	default y
-
-config GT64260
-	bool
-	depends on EV64260 || CPCI690
-	default y
-
-config MV64360		# Really MV64360 & MV64460
-	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-	default y
-
-config MV64X60
-	bool
-	depends on (GT64260 || MV64360)
-	select PPC_INDIRECT_PCI
-	default y
-
-config MV643XX_ETH_0
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
-	default y
-
-config MV643XX_ETH_1
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-config MV643XX_ETH_2
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-menu "Set bridge options"
-	depends on MV64X60
-
-config NOT_COHERENT_CACHE
-	bool "Turn off Cache Coherency"
-	default n
-	help
-	  Some 64x60 bridges lock up when trying to enforce cache coherency.
-	  When this option is selected, cache coherency will be turned off.
-	  Note that this can cause other problems (e.g., stale data being
-	  speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-	hex "Set bridge base used by firmware"
-	default "0xf1000000"
-	help
-	  A firmware can leave the base address of the bridge's registers at
-	  a non-standard location.  If so, set this value to reflect the
-	  address of that non-standard location.
-
-config MV64X60_NEW_BASE
-	hex "Set bridge base used by kernel"
-	default "0xf1000000"
-	help
-	  If the current base address of the bridge's registers is not where
-	  you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-	bool "Enable Non-Monarch Support"
-	depends on PRPMC800
-
-config HARRIER
-	bool
-	depends on PRPMC800
-	default y
-
-config EPIC_SERIAL_MODE
-	bool
-	depends on 6xx && (LOPEC || SANDPOINT)
-	default y
-
-config MPC10X_BRIDGE
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	select PPC_INDIRECT_PCI
-	default y
-
-config MPC10X_OPENPIC
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	default y
-
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-	bool "Enable DUART mode on Sandpoint"
-	depends on SANDPOINT
-	help
-	  If this option is enabled then the MPC824x processor will run
-	  in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-	bool "Enable Harrier store gathering"
-	depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-	bool "MVME5100 configured with an IPMC761"
-	depends on MVME5100
-	select PPC_I8259
-
-config SPRUCE_BAUD_33M
-	bool "Spruce baud clock support"
-	depends on SPRUCE
-
-config PC_KEYBOARD
-	bool "PC PS/2 style Keyboard"
-	depends on 4xx || CPM2
-
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
-config SMP
-	depends on PPC_STD_MMU
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.  Note that the kernel does not currently
-	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
-	  since they have inadequate hardware support for multiprocessor
-	  operation.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on single-processor machines.
-	  On a single-processor machine, the kernel will run faster if you say
-	  N here.
-
-	  If you don't know what to do here, say N.
-
-config IRQ_ALL_CPUS
-	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
-	help
-	  This option gives the kernel permission to distribute IRQs across
-	  multiple CPUs.  Saying N here will route all IRQs to the first
-	  CPU.  Generally saying Y is safe, although some problems have been
-	  reported with SMP Power Macintoshes with this option enabled.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "4"
-
-config HIGHMEM
-	bool "High memory support"
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
-source "mm/Kconfig"
-
-source "fs/Kconfig.binfmt"
-
-config PREP_RESIDUAL
-	bool "Support for PReP Residual Data"
-	depends on PPC_PREP
-	help
-	  Some PReP systems have residual data passed to the kernel by the
-	  firmware.  This allows detection of memory size, devices present and
-	  other useful pieces of information.  Sometimes this information is
-	  not present or incorrect, in which case it could lead to the machine 
-	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
-	  or pass the 'noresidual' option to the kernel.
-
-	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
-if BROKEN
-source kernel/power/Kconfig
-endif
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "Bus options"
-
-config ISA
-	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
-
-config ZONE_DMA
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	depends on 6xx && !CPM2
-	default y
-
-config PPC_I8259
-	bool
-	default y if PPC_PREP
-	default n
-
-config PPC_INDIRECT_PCI
-	bool
-	depends on PCI
-	default y if 40x || 44x || PPC_PREP
-	default n
-
-config EISA
-	bool
-	help
-	  The Extended Industry Standard Architecture (EISA) bus is a bus
-	  architecture used on some older intel-based PCs.
-
-config SBUS
-	bool
-
-# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
-config MCA
-	bool
-
-config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx
-	default PCI_QSPAN if !4xx && !CPM2 && 8xx
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
-	def_bool PCI
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_QSPAN
-	bool "QSpan PCI"
-	depends on !4xx && !CPM2 && 8xx
-	select PPC_I8259
-	help
-	  Say Y here if you have a system based on a Motorola 8xx-series
-	  embedded processor with a QSPAN PCI interface, otherwise say N.
-
-config PCI_8260
-	bool
-	depends on PCI && 8260
-	select PPC_INDIRECT_PCI
-	default y
-
-config 8260_PCI9
-	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260
-	default y
-
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config RAPIDIO
-	bool "RapidIO support" if MPC8540 || MPC8560
-	help
-	  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
-endmenu
-
-menu "Advanced setup"
-
-config ADVANCED_OPTIONS
-	bool "Prompt for advanced kernel configuration options"
-	help
-	  This option will enable prompting for a variety of advanced kernel
-	  configuration options.  These options can cause the kernel to not
-	  work if they are set incorrectly, but can be used to optimize certain
-	  aspects of kernel memory management.
-
-	  Unless you know what you are doing, say N here.
-
-comment "Default settings for advanced configuration options are used"
-	depends on !ADVANCED_OPTIONS
-
-config HIGHMEM_START_BOOL
-	bool "Set high memory pool address"
-	depends on ADVANCED_OPTIONS && HIGHMEM
-	help
-	  This option allows you to set the base address of the kernel virtual
-	  area used to map high memory pages.  This can be useful in
-	  optimizing the layout of kernel virtual memory.
-
-	  Say N here unless you know what you are doing.
-
-config HIGHMEM_START
-	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
-	default "0xfe000000"
-
-config LOWMEM_SIZE_BOOL
-	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the maximum amount of memory which
-	  will be used as "low memory", that is, memory which the kernel can
-	  access directly, without having to set up a kernel virtual mapping.
-	  This can be useful in optimizing the layout of kernel virtual
-	  memory.
-
-	  Say N here unless you know what you are doing.
-
-config LOWMEM_SIZE
-	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	default "0x30000000"
-
-config KERNEL_START_BOOL
-	bool "Set custom kernel base address"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the kernel virtual address at which
-	  the kernel will map low memory (the kernel image will be linked at
-	  this address).  This can be useful in optimizing the virtual memory
-	  layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config KERNEL_START
-	hex "Virtual address of kernel base" if KERNEL_START_BOOL
-	default "0xc0000000"
-
-config TASK_SIZE_BOOL
-	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the amount of virtual address space
-	  allocated to user tasks.  This can be useful in optimizing the
-	  virtual memory layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config TASK_SIZE
-	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000"
-
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	default "0x00200000" if NOT_COHERENT_CACHE
-
-config BOOT_LOAD_BOOL
-	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_PREP
-	help
-	  This option allows you to set the initial load address of the zImage
-	  or zImage.initrd file.  This can be useful if you are on a board
-	  which has a small amount of memory.
-
-	  Say N here unless you know what you are doing.
-
-config BOOT_LOAD
-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
-	default "0x00400000" if 40x || 8xx || 8260
-	default "0x01000000" if 44x
-	default "0x00800000"
-
-config PIN_TLB
-	bool "Pinned Kernel TLBs (860 ONLY)"
-	depends on ADVANCED_OPTIONS && 8xx
-
-config PPC_LIB_RHEAP
-	bool
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/ppc/8xx_io/Kconfig"
-
-source "arch/ppc/8260_io/Kconfig"
-
-
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-endmenu
-
-source "lib/Kconfig"
-
-source "arch/ppc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
deleted file mode 100644
index f94b87740973..000000000000
--- a/arch/ppc/Kconfig.debug
+++ /dev/null
@@ -1,66 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUG_KERNEL && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
-
-config XMON
-	bool "Include xmon kernel debugger"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for the xmon kernel monitor/debugger.
-	  Unless you are intending to debug the kernel, say N here.
-
-config BDI_SWITCH
-	bool "Include BDI-2000 user context switcher"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel support for the Abatron BDI2000 debugger.
-	  Unless you are intending to debug the kernel with one of these
-	  machines, say N here.
-
-config SERIAL_TEXT_DEBUG
-	bool "Support for early boot texts over serial port"
-	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
-		PPC_GEN550 || PPC_MPC52xx
-
-config PPC_OCP
-	bool
-	depends on IBM_OCP
-	default y
-
-endmenu
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
deleted file mode 100644
index 2352d139b262..000000000000
--- a/arch/ppc/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-#
-
-# This must match PAGE_OFFSET in include/asm-ppc/page.h.
-KERNELLOAD	:= $(CONFIG_KERNEL_START)
-
-HAS_BIARCH	:= $(call cc-option-yn, -m32)
-ifeq ($(HAS_BIARCH),y)
-AS		:= $(AS) -a32
-LD		:= $(LD) -m elf32ppc
-CC		:= $(CC) -m32
-endif
-
-LDFLAGS_vmlinux	:= -Ttext $(KERNELLOAD) -Bstatic
-# The -Iarch/$(ARCH)/include is temporary while we are merging
-KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) -Iarch/$(ARCH)/include
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
-KBUILD_CFLAGS	+= -Iarch/$(ARCH) -msoft-float -pipe \
-		-ffixed-r2 -mmultiple
-
-# No AltiVec instruction when building kernel
-KBUILD_CFLAGS	+= $(call cc-option, -mno-altivec)
-
-CPP		= $(CC) -E $(KBUILD_CFLAGS)
-# Temporary hack until we have migrated to asm-powerpc
-LINUXINCLUDE    += -Iarch/$(ARCH)/include
-
-CHECKFLAGS	+= -D__powerpc__
-
-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
-cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-
-KBUILD_AFLAGS += $(cpu-as-y)
-KBUILD_CFLAGS += $(cpu-as-y)
-
-# Default to the common case.
-KBUILD_DEFCONFIG := ebony_defconfig
-
-head-y				:= arch/ppc/kernel/head.o
-head-$(CONFIG_8xx)		:= arch/ppc/kernel/head_8xx.o
-head-$(CONFIG_4xx)		:= arch/ppc/kernel/head_4xx.o
-head-$(CONFIG_44x)		:= arch/ppc/kernel/head_44x.o
-
-head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
-
-core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
-				   arch/ppc/platforms/ \
-				   arch/ppc/mm/ arch/ppc/lib/ \
-				   arch/ppc/syslib/ arch/powerpc/sysdev/ \
-				   arch/powerpc/lib/
-core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
-core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
-core-$(CONFIG_XMON)		+= arch/ppc/xmon/
-drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
-
-drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
-
-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
-
-PHONY += $(BOOT_TARGETS)
-
-all: uImage zImage
-
-CPPFLAGS_vmlinux.lds	:= -Upowerpc
-
-# All the instructions talk about "make bzImage".
-bzImage: zImage
-
-boot := arch/$(ARCH)/boot
-
-$(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
-
-uImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot)/images $(boot)/images/$@
-
-define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
-  @echo '  uImage          - Create a bootable image for U-Boot / PPCBoot'
-  @echo '  install         - Install kernel using'
-  @echo '                    (your) ~/bin/installkernel or'
-  @echo '                    (distribution) /sbin/installkernel or'
-  @echo '                    install to $$(INSTALL_PATH) and run lilo'
-  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/ppc/configs'
-endef
-
-archclean:
-	$(Q)$(MAKE) $(clean)=arch/ppc/boot
-	# Temporary hack until we have migrated to asm-powerpc
-	$(Q)rm -rf arch/$(ARCH)/include
-
-archprepare: checkbin
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
-	$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
-	$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
-# to stdout and these checks are run even on install targets.
-TOUT	:= .tmp_gas_check
-# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
-# instructions.
-# gcc-3.4 and binutils-2.14 are a fatal combination.
-
-checkbin:
-	@if test "$(call cc-version)" = "0304" ; then \
-		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
-			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
-			echo 'correctly with gcc-3.4 and your version of binutils.'; \
-			echo '*** Please upgrade your binutils or downgrade your gcc'; \
-			false; \
-		fi ; \
-	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
-
-CLEAN_FILES += $(TOUT)
-
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile
deleted file mode 100644
index 500497e3c72d..000000000000
--- a/arch/ppc/boot/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# arch/ppc/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Adapted for PowerPC by Gary Thomas
-# modified by Cort (cort@cs.nmt.edu)
-#
-
-# KBUILD_CFLAGS used when building rest of boot (takes effect recursively)
-KBUILD_CFLAGS 	+= -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include
-HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
-
-BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
-
-bootdir-y			:= simple
-subdir-y			:= lib common images
-subdir-$(CONFIG_PPC_PREP)	+= of1275
-
-# for cleaning
-subdir-				+= simple
-
-hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
-
-PHONY += $(BOOT_TARGETS) $(bootdir-y)
-
-$(BOOT_TARGETS): $(bootdir-y)
-
-$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
-		$(addprefix $(obj)/,$(hostprogs-y))
-	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile
deleted file mode 100644
index a2e85e3beb88..000000000000
--- a/arch/ppc/boot/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Tom Rini	January 2001
-#
-
-lib-y					:= string.o util.o misc-common.o \
-						serial_stub.o bootinfo.o
-lib-$(CONFIG_SERIAL_8250_CONSOLE)	+= ns16550.o
diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c
deleted file mode 100644
index f4dc9b9fab9c..000000000000
--- a/arch/ppc/boot/common/bootinfo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * General bootinfo record utilities
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * 2002 (c) MontaVista Software, Inc. This file is licensed under the terms
- * of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-
-#include "nonstdio.h"
-
-static struct bi_record * birec = NULL;
-
-static struct bi_record *
-__bootinfo_build(struct bi_record *rec, unsigned long tag, unsigned long size,
-		 void *data)
-{
-	/* set the tag */
-	rec->tag = tag;
-
-	/* if the caller has any data, copy it */
-	if (size)
-		memcpy(rec->data, (char *)data, size);
-
-	/* set the record size */
-	rec->size = sizeof(struct bi_record) + size;
-
-	/* advance to the next available space */
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	return rec;
-}
-
-void
-bootinfo_init(struct bi_record *rec)
-{
-
-	/* save start of birec area */
-	birec = rec;
-
-	/* create an empty list */
-	rec = __bootinfo_build(rec, BI_FIRST, 0, NULL);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-
-}
-
-void
-bootinfo_append(unsigned long tag, unsigned long size, void * data)
-{
-
-	struct bi_record *rec = birec;
-
-	/* paranoia */
-	if ((rec == NULL) || (rec->tag != BI_FIRST))
-		return;
-
-	/* find the last entry in the list */
-	while (rec->tag != BI_LAST)
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-
-	/* overlay BI_LAST record with new one and tag on a new BI_LAST */
-	rec = __bootinfo_build(rec, tag, size, data);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-}
diff --git a/arch/ppc/boot/common/crt0.S b/arch/ppc/boot/common/crt0.S
deleted file mode 100644
index 8f0ef04b8de5..000000000000
--- a/arch/ppc/boot/common/crt0.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*    Copyright (c) 1997 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Initial Power Macintosh COFF version.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      Modifications for IBM PowerPC 400-class processor evaluation
- *      boards.
- *
- *    Module name: crt0.S
- *
- *    Description:
- *      Boot loader execution entry point. Clears out .bss section as per
- *      ANSI C requirements. Invalidates and flushes the caches over the
- *      range covered by the boot loader's .text section. Sets up a stack
- *      below the .text section entry point.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-
-	.text
-
-	.globl	_start
-_start:
-#ifdef XCOFF
-	.long	__start,0,0
-
-	.globl	__start
-__start:
-#endif
-
-	## Flush and invalidate the caches for the range in memory covering
-	## the .text section of the boot loader
-
-	lis	r9,_start@h		# r9 = &_start
-	lis	r8,_etext@ha		#
-	addi	r8,r8,_etext@l		# r8 = &_etext
-3:	dcbf	r0,r9			# Flush the data cache
-	icbi	r0,r9			# Invalidate the instruction cache
-	addi	r9,r9,0x10		# Increment by one cache line
-	cmplw	cr0,r9,r8		# Are we at the end yet?
-	blt	3b			# No, keep flushing and invalidating
-	sync				# sync ; isync after flushing the icache
-	isync
-
-	## Clear out the BSS as per ANSI C requirements
-
-	lis	r7,_end@ha
-	addi	r7,r7,_end@l		# r7 = &_end
-	lis	r8,__bss_start@ha	#
-	addi	r8,r8,__bss_start@l	# r8 = &_bss_start
-
-	## Determine how large an area, in number of words, to clear
-
-	subf	r7,r8,r7		# r7 = &_end - &_bss_start + 1
-	addi	r7,r7,3			# r7 += 3
-	srwi.	r7,r7,2			# r7 = size in words.
-	beq	2f			# If the size is zero, do not bother
-	addi	r8,r8,-4		# r8 -= 4
-	mtctr	r7			# SPRN_CTR = number of words to clear
-	li	r0,0			# r0 = 0
-1:	stwu	r0,4(r8)		# Clear out a word
-	bdnz	1b			# If we are not done yet, keep clearing
-2:
-
-#ifdef CONFIG_40x
-	## Set up the stack
-
-	lis	r9,_start@h		# r9 = &_start (text section entry)
-	ori	r9,r9,_start@l
-	subi	r1,r9,64		# Start the stack 64 bytes below _start
-	clrrwi	r1,r1,4			# Make sure it is aligned on 16 bytes.
-	li	r0,0
-	stwu	r0,-16(r1)
-	mtlr	r9
-#endif
-
-	b	start			# All done, start the real work.
diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c
deleted file mode 100644
index 9589969cec72..000000000000
--- a/arch/ppc/boot/common/misc-common.c
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * Misc. bootloader code (almost) all platforms can use
- *
- * Author: Johnnie Peters <jpeters@mvista.com>
- * Editor: Tom Rini <trini@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>	/* for va_ bits */
-#include <linux/string.h>
-#include <linux/zlib.h>
-#include "nonstdio.h"
-
-/* If we're on a PReP, assume we have a keyboard controller
- * Also note, if we're not PReP, we assume you are a serial
- * console - Tom */
-#if defined(CONFIG_PPC_PREP) && defined(CONFIG_VGA_CONSOLE)
-extern void cursor(int x, int y);
-extern void scroll(void);
-extern char *vidmem;
-extern int lines, cols;
-extern int orig_x, orig_y;
-extern int keyb_present;
-extern int CRT_tstc(void);
-extern int CRT_getc(void);
-#else
-int cursor(int x, int y) {return 0;}
-void scroll(void) {}
-char vidmem[1];
-#define lines 0
-#define cols 0
-int orig_x = 0;
-int orig_y = 0;
-#define keyb_present 0
-int CRT_tstc(void) {return 0;}
-int CRT_getc(void) {return 0;}
-#endif
-
-extern char *avail_ram;
-extern char *end_avail;
-extern char _end[];
-
-void puts(const char *);
-void putc(const char c);
-void puthex(unsigned long val);
-void gunzip(void *, int, unsigned char *, int *);
-static int _cvt(unsigned long val, char *buf, long radix, char *digits);
-
-void _vprintk(void(*putc)(const char), const char *fmt0, va_list ap);
-unsigned char *ISA_io = NULL;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-extern unsigned long com_port;
-
-extern int serial_tstc(unsigned long com_port);
-extern unsigned char serial_getc(unsigned long com_port);
-extern void serial_putc(unsigned long com_port, unsigned char c);
-#endif
-
-void pause(void)
-{
-	puts("pause\n");
-}
-
-void exit(void)
-{
-	puts("exit\n");
-	while(1);
-}
-
-int tstc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	if(keyb_present)
-		return (CRT_tstc() || serial_tstc(com_port));
-	else
-		return (serial_tstc(com_port));
-#else
-	return CRT_tstc();
-#endif
-}
-
-int getc(void)
-{
-	while (1) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-		if (serial_tstc(com_port))
-			return (serial_getc(com_port));
-#endif /* serial console */
-		if (keyb_present)
-			if(CRT_tstc())
-				return (CRT_getc());
-	}
-}
-
-void
-putc(const char c)
-{
-	int x,y;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	serial_putc(com_port, c);
-	if ( c == '\n' )
-		serial_putc(com_port, '\r');
-#endif /* serial console */
-
-	x = orig_x;
-	y = orig_y;
-
-	if ( c == '\n' ) {
-		x = 0;
-		if ( ++y >= lines ) {
-			scroll();
-			y--;
-		}
-	} else if (c == '\r') {
-		x = 0;
-	} else if (c == '\b') {
-		if (x > 0) {
-			x--;
-		}
-	} else {
-		vidmem [ ( x + cols * y ) * 2 ] = c;
-		if ( ++x >= cols ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void puts(const char *s)
-{
-	int x,y;
-	char c;
-
-	x = orig_x;
-	y = orig_y;
-
-	while ( ( c = *s++ ) != '\0' ) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	        serial_putc(com_port, c);
-	        if ( c == '\n' ) serial_putc(com_port, '\r');
-#endif /* serial console */
-
-		if ( c == '\n' ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		} else if (c == '\b') {
-		  if (x > 0) {
-		    x--;
-		  }
-		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c;
-			if ( ++x >= cols ) {
-				x = 0;
-				if ( ++y >= lines ) {
-					scroll();
-					y--;
-				}
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-static void *zalloc(unsigned size)
-{
-	void *p = avail_ram;
-
-	size = (size + 7) & -8;
-	avail_ram += size;
-	if (avail_ram > end_avail) {
-		puts("oops... out of memory\n");
-		pause();
-	}
-	return p;
-}
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-		puts("bad gzipped data\n");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		puts("gunzip: ran out of data in header\n");
-		exit();
-	}
-
-	/* Initialize ourself. */
-	s.workspace = zalloc(zlib_inflate_workspacesize());
-	r = zlib_inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = zlib_inflate(&s, Z_FINISH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		puts("inflate returned "); puthex(r); puts("\n");
-		exit();
-	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	zlib_inflateEnd(&s);
-}
-
-void
-puthex(unsigned long val)
-{
-
-	unsigned char buf[10];
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789ABCDEF"[val & 0x0F];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	puts(buf);
-}
-
-#define FALSE 0
-#define TRUE  1
-
-void
-_printk(char const *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	_vprintk(putc, fmt, ap);
-	va_end(ap);
-	return;
-}
-
-#define is_digit(c) ((c >= '0') && (c <= '9'))
-
-void
-_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
-{
-	char c, sign, *cp = 0;
-	int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
-	char buf[32];
-	long val;
-	while ((c = *fmt0++))
-	{
-		if (c == '%')
-		{
-			c = *fmt0++;
-			left_prec = right_prec = pad_on_right = 0;
-			if (c == '-')
-			{
-				c = *fmt0++;
-				pad_on_right++;
-			}
-			if (c == '0')
-			{
-				zero_fill = TRUE;
-				c = *fmt0++;
-			} else
-			{
-				zero_fill = FALSE;
-			}
-			while (is_digit(c))
-			{
-				left_prec = (left_prec * 10) + (c - '0');
-				c = *fmt0++;
-			}
-			if (c == '.')
-			{
-				c = *fmt0++;
-				zero_fill++;
-				while (is_digit(c))
-				{
-					right_prec = (right_prec * 10) + (c - '0');
-					c = *fmt0++;
-				}
-			} else
-			{
-				right_prec = left_prec;
-			}
-			sign = '\0';
-			switch (c)
-			{
-			case 'd':
-			case 'x':
-			case 'X':
-				val = va_arg(ap, long);
-				switch (c)
-				{
-				case 'd':
-					if (val < 0)
-					{
-						sign = '-';
-						val = -val;
-					}
-					length = _cvt(val, buf, 10, "0123456789");
-					break;
-				case 'x':
-					length = _cvt(val, buf, 16, "0123456789abcdef");
-					break;
-				case 'X':
-					length = _cvt(val, buf, 16, "0123456789ABCDEF");
-					break;
-				}
-				cp = buf;
-				break;
-			case 's':
-				cp = va_arg(ap, char *);
-				length = strlen(cp);
-				break;
-			case 'c':
-				c = va_arg(ap, long /*char*/);
-				(*putc)(c);
-				continue;
-			default:
-				(*putc)('?');
-			}
-			pad = left_prec - length;
-			if (sign != '\0')
-			{
-				pad--;
-			}
-			if (zero_fill)
-			{
-				c = '0';
-				if (sign != '\0')
-				{
-					(*putc)(sign);
-					sign = '\0';
-				}
-			} else
-			{
-				c = ' ';
-			}
-			if (!pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-			if (sign != '\0')
-			{
-				(*putc)(sign);
-			}
-			while (length-- > 0)
-			{
-				(*putc)(c = *cp++);
-				if (c == '\n')
-				{
-					(*putc)('\r');
-				}
-			}
-			if (pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-		} else
-		{
-			(*putc)(c);
-			if (c == '\n')
-			{
-				(*putc)('\r');
-			}
-		}
-	}
-}
-
-int
-_cvt(unsigned long val, char *buf, long radix, char *digits)
-{
-	char temp[80];
-	char *cp = temp;
-	int length = 0;
-	if (val == 0)
-	{ /* Special case */
-		*cp++ = '0';
-	} else
-		while (val)
-		{
-			*cp++ = digits[val % radix];
-			val /= radix;
-		}
-	while (cp != temp)
-	{
-		*buf++ = *--cp;
-		length++;
-	}
-	*buf = '\0';
-	return (length);
-}
-
-void
-_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
-{
-	int i, c;
-	if ((unsigned int)s > (unsigned int)p)
-	{
-		s = (unsigned int)s - (unsigned int)p;
-	}
-	while (s > 0)
-	{
-		if (base)
-		{
-			_printk("%06X: ", (int)p - (int)base);
-		} else
-		{
-			_printk("%06X: ", p);
-		}
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				_printk("%02X", p[i] & 0xFF);
-			} else
-			{
-				_printk("  ");
-			}
-			if ((i % 2) == 1) _printk(" ");
-			if ((i % 8) == 7) _printk(" ");
-		}
-		_printk(" |");
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				c = p[i] & 0xFF;
-				if ((c < 0x20) || (c >= 0x7F)) c = '.';
-			} else
-			{
-				c = ' ';
-			}
-			_printk("%c", c);
-		}
-		_printk("|\n");
-		s -= 16;
-		p += 16;
-	}
-}
-
-void
-_dump_buf(unsigned char *p, int s)
-{
-	_printk("\n");
-	_dump_buf_with_offset(p, s, 0);
-}
-
-/* Very simple inb/outb routines.  We declare ISA_io to be 0 above, and
- * then modify it on platforms which need to.  We do it like this
- * because on some platforms we give inb/outb an exact location, and
- * on others it's an offset from a given location. -- Tom
- */
-
-void ISA_init(unsigned long base)
-{
-	ISA_io = (unsigned char *)base;
-}
-
-void
-outb(int port, unsigned char val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	ISA_io[port] = val;
-}
-
-unsigned char
-inb(int port)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	return (ISA_io[port]);
-}
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
deleted file mode 100644
index fc5b72041948..000000000000
--- a/arch/ppc/boot/common/ns16550.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * COM1 NS16550 support
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-
-#if defined(CONFIG_XILINX_VIRTEX)
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-#include "nonstdio.h"
-#include "serial.h"
-
-#define SERIAL_BAUD	9600
-
-extern unsigned long ISA_io;
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* Defined in <asm/serial.h> */
-};
-
-static int shift;
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port, base_baud;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-	/* Base baud.. */
-	base_baud = rs_table[chan].baud_base;
-	
-	/* save the LCR */
-	lcr = inb(com_port + (UART_LCR << shift));
-	/* Access baud rate */
-	outb(com_port + (UART_LCR << shift), 0x80);
-	dlm = inb(com_port + (UART_DLM << shift));
-	/*
-	 * Test if serial port is unconfigured.
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-
-	if ((dlm <= 4) && (lcr & 2))
-		/* port is configured, put the old LCR back */
-		outb(com_port + (UART_LCR << shift), lcr);
-	else {
-		/* Input clock. */
-		outb(com_port + (UART_DLL << shift),
-		     (base_baud / SERIAL_BAUD) & 0xFF);
-		outb(com_port + (UART_DLM << shift),
-		     (base_baud / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		outb(com_port + (UART_MCR << shift), 0x03);
-	}
-	/* Clear & enable FIFOs */
-	outb(com_port + (UART_FCR << shift), 0x07);
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c
deleted file mode 100644
index 5cc9ae66a8ba..000000000000
--- a/arch/ppc/boot/common/serial_stub.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This is a few stub routines to make the boot code cleaner looking when
- * there is no serial port support doesn't need to be closed, for example.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed "as
- * is" without any warranty of any kind, whether express or implied.
- */
-
-unsigned long __attribute__ ((weak))
-serial_init(int chan, void *ignored)
-{
-	return 0;
-}
-
-void __attribute__ ((weak))
-serial_close(unsigned long com_port)
-{
-}
diff --git a/arch/ppc/boot/common/string.S b/arch/ppc/boot/common/string.S
deleted file mode 100644
index 8016e43c4771..000000000000
--- a/arch/ppc/boot/common/string.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#define r0	0
-#define r3	3
-#define r4	4
-#define r5	5
-#define r6	6
-#define r7	7
-#define r8	8
-
-	.globl	strlen
-strlen:
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-	.globl	memset
-memset:
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	rlwinm	r0,r5,32-2,2,31
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-	.globl	memmove
-memmove:
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-	.globl	memcpy
-memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	backwards_memcpy
-backwards_memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	memcmp
-memcmp:
-	cmpwi	0,r5,0
-	blelr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S
deleted file mode 100644
index 0c5e43c4ae06..000000000000
--- a/arch/ppc/boot/common/util.S
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Useful bootup functions, which are more easily done in asm than C.
- *
- * NOTE:  Be very very careful about the registers you use here.
- *	We don't follow any ABI calling convention among the
- *	assembler functions that call each other, especially early
- *	in the initialization.  Please preserve at least r3 and r4
- *	for these early functions, as they often contain information
- *	passed from boot roms into the C decompress function.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-
-	.text
-
-#ifdef CONFIG_6xx
-	.globl	disable_6xx_mmu
-disable_6xx_mmu:
-	/* Establish default MSR value, exception prefix 0xFFF.
-	 * If necessary, this function must fix up the LR if we
-	 * return to a different address space once the MMU is
-	 * disabled.
-	 */
-	li	r8,MSR_IP|MSR_FP
-	mtmsr	r8
-	isync
-
-	/* Test for a 601 */
-	mfpvr	r10
-	srwi	r10,r10,16
-	cmpwi	0,r10,1		/* 601 ? */
-	beq	.clearbats_601
-
-	/* Clear BATs */
-	li	r8,0
-	mtspr	SPRN_DBAT0U,r8
-	mtspr	SPRN_DBAT0L,r8
-	mtspr	SPRN_DBAT1U,r8
-	mtspr	SPRN_DBAT1L,r8
-	mtspr	SPRN_DBAT2U,r8
-	mtspr	SPRN_DBAT2L,r8
-	mtspr	SPRN_DBAT3U,r8
-	mtspr	SPRN_DBAT3L,r8
-.clearbats_601:
-	mtspr	SPRN_IBAT0U,r8
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT1U,r8
-	mtspr	SPRN_IBAT1L,r8
-	mtspr	SPRN_IBAT2U,r8
-	mtspr	SPRN_IBAT2L,r8
-	mtspr	SPRN_IBAT3U,r8
-	mtspr	SPRN_IBAT3L,r8
-	isync
-	sync
-	sync
-
-	/* Set segment registers */
-	li	r8,16		/* load up segment register values */
-	mtctr	r8		/* for context 0 */
-	lis	r8,0x2000	/* Ku = 1, VSID = 0 */
-	li	r10,0
-3:	mtsrin	r8,r10
-	addi	r8,r8,0x111	/* increment VSID */
-	addis	r10,r10,0x1000	/* address of next segment */
-	bdnz	3b
-	blr
-
-	.globl	disable_6xx_l1cache
-disable_6xx_l1cache:
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r8,0
-	ori	r8,r8,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r11,SPRN_HID0
-	or	r11,r11,r8
-	andc	r10,r11,r8
-	isync
-	mtspr	SPRN_HID0,r8
-	sync
-	isync
-	mtspr	SPRN_HID0,r10
-	sync
-	isync
-	blr
-#endif
-
-	.globl	_setup_L2CR
-_setup_L2CR:
-/*
- * We should be skipping this section on CPUs where this results in an
- * illegal instruction.  If not, please send trini@kernel.crashing.org
- * the PVR of your CPU.
- */
-	/* Invalidate/disable L2 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L2CR
-	rlwinm	r8,r8,0,1,31
-	oris	r8,r8,L2CR_L2I@h
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-	mfspr   r8,SPRN_PVR
-	srwi    r8,r8,16
-	cmplwi	cr0,r8,0x8000			/* 7450 */
-	cmplwi	cr1,r8,0x8001			/* 7455 */
-	cmplwi	cr2,r8,0x8002			/* 7457 */
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq	/* Now test if any are true. */
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
-	bne     2f
-
-1:	mfspr	r8,SPRN_L2CR	/* On 745x, poll L2I bit (bit 10) */
-	rlwinm.	r9,r8,0,10,10
-	bne	1b
-	b	3f
-
-2:      mfspr   r8,SPRN_L2CR	/* On 75x & 74[01]0, poll L2IP bit (bit 31) */
-	rlwinm. r9,r8,0,31,31
-	bne     2b
-
-3:	rlwinm	r8,r8,0,11,9	/* Turn off L2I bit */
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-	blr
-
-	.globl	_setup_L3CR
-_setup_L3CR:
-	/* Invalidate/disable L3 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L3CR
-	rlwinm	r8,r8,0,1,31
-	ori	r8,r8,L3CR_L3I@l
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-1:	mfspr	r8,SPRN_L3CR
-	rlwinm.	r9,r8,0,21,21
-	bne	1b
-
-	rlwinm	r8,r8,0,22,20		/* Turn off L3I bit */
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-	blr
-
-
-/* udelay (on non-601 processors) needs to know the period of the
- * timebase in nanoseconds.  This used to be hardcoded to be 60ns
- * (period of 66MHz/4).  Now a variable is used that is initialized to
- * 60 for backward compatibility, but it can be overridden as necessary
- * with code something like this:
- *    extern unsigned long timebase_period_ns;
- *    timebase_period_ns = 1000000000 / bd->bi_tbfreq;
- */
-	.data
-	.globl timebase_period_ns
-timebase_period_ns:
-	.long	60
-
-	.text
-/*
- * Delay for a number of microseconds
- */
-	.globl	udelay
-udelay:
-	mfspr	r4,SPRN_PVR
-	srwi	r4,r4,16
-	cmpwi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
-00:	li	r0,86	/* Instructions / microsecond? */
-	mtctr	r0
-10:	addi	r0,r0,0 /* NOP */
-	bdnz	10b
-	subic.	r3,r3,1
-	bne	00b
-	blr
-
-.udelay_not_601:
-	mulli	r4,r3,1000	/* nanoseconds */
-	/*  Change r4 to be the number of ticks using:	
-	 *	(nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
-	 *  timebase_period_ns defaults to 60 (16.6MHz) */
-	lis	r5,timebase_period_ns@ha
-	lwz	r5,timebase_period_ns@l(r5)
-	add	r4,r4,r5
-	addi	r4,r4,-1
-	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
-	cmpw	0,r5,r7
-	bne	1b		/* Get [synced] base time */
-	addc	r9,r6,r4	/* Compute end time */
-	addze	r8,r5
-2:	mftbu	r5
-	cmpw	0,r5,r8
-	blt	2b
-	bgt	3f
-	mftb	r6
-	cmpw	0,r6,r9
-	blt	2b
-3:	blr
-
-	.section ".relocate_code","xa"
-/*
- * Flush and enable instruction cache
- * First, flush the data cache in case it was enabled and may be
- * holding instructions for copy back.
- */
-        .globl flush_instruction_cache
-flush_instruction_cache:        
-	mflr	r6
-	bl	flush_data_cache
-
-#ifdef CONFIG_8xx
-	lis	r3, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_DISABLE@h
-	mtspr	SPRN_DC_CST, r3
-#elif CONFIG_4xx
-	lis	r3,start@h		# r9 = &_start
-	lis	r4,_etext@ha
-	addi	r4,r4,_etext@l		# r8 = &_etext
-1:	dcbf	r0,r3			# Flush the data cache
-	icbi	r0,r3			# Invalidate the instruction cache
-	addi	r3,r3,0x10		# Increment by one cache line
-	cmplw	cr0,r3,r4		# Are we at the end yet?
-	blt	1b			# No, keep flushing and invalidating
-#else
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r3,0
-	ori	r3,r3,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r4,SPRN_HID0
-	or	r5,r4,r3
-	isync
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-	ori	r5,r4,HID0_ICE	/* Enable cache */
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-#endif
-	mtlr	r6
-	blr
-
-#define NUM_CACHE_LINES 128*8
-#define cache_flush_buffer 0x1000
-
-/*
- * Flush data cache
- * Do this by just reading lots of stuff into the cache.
- */
-        .globl flush_data_cache
-flush_data_cache:       
-	lis	r3,cache_flush_buffer@h
-	ori	r3,r3,cache_flush_buffer@l
-	li	r4,NUM_CACHE_LINES
-	mtctr	r4
-00:	lwz	r4,0(r3)
-	addi	r3,r3,L1_CACHE_BYTES	/* Next line, please */
-	bdnz	00b
-10:	blr
-
-	.previous
-
diff --git a/arch/ppc/boot/images/.gitignore b/arch/ppc/boot/images/.gitignore
deleted file mode 100644
index 21c2dc5b6b78..000000000000
--- a/arch/ppc/boot/images/.gitignore
+++ /dev/null
@@ -1,6 +0,0 @@
-sImage
-vmapus
-vmlinux*
-miboot*
-zImage*
-uImage
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
deleted file mode 100644
index 58415d5718e3..000000000000
--- a/arch/ppc/boot/images/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# This dir holds all of the images for PPC machines.
-# Tom Rini	January 2001
-
-MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
-
-extra-y		:= vmlinux.bin vmlinux.gz
-
-# two make processes may write to vmlinux.gz at the same time with make -j
-quiet_cmd_mygzip = GZIP    $@
-cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
-
-
-OBJCOPYFLAGS_vmlinux.bin := -O binary
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,mygzip)
-
-quiet_cmd_uimage = UIMAGE  $@
-      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
-               -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-               -d $< $@
-
-targets += uImage
-$(obj)/uImage: $(obj)/vmlinux.gz
-	$(Q)rm -f $@
-	$(call cmd,uimage)
-	@echo -n '  Image: $@ '
-	@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
-
-# Files generated that shall be removed upon make clean
-clean-files	:= sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/boot/include/cpc700.h b/arch/ppc/boot/include/cpc700.h
deleted file mode 100644
index 28cfcde44909..000000000000
--- a/arch/ppc/boot/include/cpc700.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-#ifndef __PPC_BOOT_CPC700_H
-#define __PPC_BOOT_CPC700_H
-
-#define CPC700_MEM_CFGADDR    0xff500008
-#define CPC700_MEM_CFGDATA    0xff50000c
-
-#define CPC700_MB0SA            0x38
-#define CPC700_MB0EA            0x58
-#define CPC700_MB1SA            0x3c
-#define CPC700_MB1EA            0x5c
-#define CPC700_MB2SA            0x40
-#define CPC700_MB2EA            0x60
-#define CPC700_MB3SA            0x44
-#define CPC700_MB3EA            0x64
-#define CPC700_MB4SA            0x48
-#define CPC700_MB4EA            0x68
-
-static inline long
-cpc700_read_memreg(int reg)
-{
-	out_be32((volatile unsigned int *) CPC700_MEM_CFGADDR, reg);
-	return in_be32((volatile unsigned int *) CPC700_MEM_CFGDATA);
-}
-
-#endif
diff --git a/arch/ppc/boot/include/iso_font.h b/arch/ppc/boot/include/iso_font.h
deleted file mode 100644
index bff050e002b7..000000000000
--- a/arch/ppc/boot/include/iso_font.h
+++ /dev/null
@@ -1,257 +0,0 @@
-static const unsigned char font[] = {
-/* 0x00 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x01 */ 0x00,0x00,0x7E,0x81,0xA5,0x81,0x81,0xBD,0x99,0x81,0x81,0x7E,0x00,0x00,0x00,0x00,
-/* 0x02 */ 0x00,0x00,0x7E,0xFF,0xDB,0xFF,0xFF,0xC3,0xC3,0xE7,0xFF,0x7E,0x00,0x00,0x00,0x00,
-/* 0x03 */ 0x00,0x00,0x00,0x00,0x6C,0xFE,0xFE,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x04 */ 0x00,0x00,0x00,0x00,0x10,0x38,0x7C,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x05 */ 0x00,0x00,0x00,0x18,0x3C,0x3C,0xE7,0xE7,0xE7,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x06 */ 0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xFF,0x7E,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x07 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x08 */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x09 */ 0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x42,0x42,0x66,0x3C,0x00,0x00,0x00,0x00,0x00,
-/* 0x0A */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0x99,0xBD,0xBD,0x99,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x0B */ 0x00,0x00,0x3E,0x0E,0x1A,0x32,0x78,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x0C */ 0x00,0x00,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x0D */ 0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00,
-/* 0x0E */ 0x00,0x00,0x7F,0x63,0x7F,0x63,0x63,0x63,0x63,0x67,0xE7,0xE6,0xC0,0x00,0x00,0x00,
-/* 0x0F */ 0x00,0x00,0x00,0x18,0x18,0xDB,0x3C,0xE7,0x3C,0xDB,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x10 */ 0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFE,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x11 */ 0x00,0x02,0x06,0x0E,0x1E,0x3E,0xFE,0x3E,0x1E,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x12 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x13 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x14 */ 0x00,0x00,0x7F,0xDB,0xDB,0xDB,0x7B,0x1B,0x1B,0x1B,0x1B,0x1B,0x00,0x00,0x00,0x00,
-/* 0x15 */ 0x00,0x7C,0xC6,0x60,0x38,0x6C,0xC6,0xC6,0x6C,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,
-/* 0x16 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,
-/* 0x17 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x18 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x19 */ 0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x1A */ 0x00,0x00,0x00,0x00,0x00,0x18,0x0C,0xFE,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1B */ 0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xFE,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1C */ 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1D */ 0x00,0x00,0x00,0x00,0x00,0x28,0x6C,0xFE,0x6C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1E */ 0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7C,0x7C,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x1F */ 0x00,0x00,0x00,0x00,0xFE,0xFE,0x7C,0x7C,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x20 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x21 */ 0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x22 */ 0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x23 */ 0x00,0x00,0x00,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0x24 */ 0x18,0x18,0x7C,0xC6,0xC2,0xC0,0x7C,0x06,0x06,0x86,0xC6,0x7C,0x18,0x18,0x00,0x00,
-/* 0x25 */ 0x00,0x00,0x00,0x00,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC6,0x86,0x00,0x00,0x00,0x00,
-/* 0x26 */ 0x00,0x00,0x38,0x6C,0x6C,0x38,0x76,0xDC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x27 */ 0x00,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x28 */ 0x00,0x00,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0C,0x00,0x00,0x00,0x00,
-/* 0x29 */ 0x00,0x00,0x30,0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x2A */ 0x00,0x00,0x00,0x00,0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2B */ 0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2C */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00,
-/* 0x2D */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2E */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x2F */ 0x00,0x00,0x00,0x00,0x02,0x06,0x0C,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x30 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xD6,0xD6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0x31 */ 0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x32 */ 0x00,0x00,0x7C,0xC6,0x06,0x0C,0x18,0x30,0x60,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x33 */ 0x00,0x00,0x7C,0xC6,0x06,0x06,0x3C,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x34 */ 0x00,0x00,0x0C,0x1C,0x3C,0x6C,0xCC,0xFE,0x0C,0x0C,0x0C,0x1E,0x00,0x00,0x00,0x00,
-/* 0x35 */ 0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xFC,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x36 */ 0x00,0x00,0x38,0x60,0xC0,0xC0,0xFC,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x37 */ 0x00,0x00,0xFE,0xC6,0x06,0x06,0x0C,0x18,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,
-/* 0x38 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7C,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x39 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00,
-/* 0x3A */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x3B */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x3C */ 0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00,
-/* 0x3D */ 0x00,0x00,0x00,0x00,0x00,0x7E,0x00,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x3E */ 0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0x00,0x00,0x00,0x00,
-/* 0x3F */ 0x00,0x00,0x7C,0xC6,0xC6,0x0C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x40 */ 0x00,0x00,0x00,0x7C,0xC6,0xC6,0xDE,0xDE,0xDE,0xDC,0xC0,0x7C,0x00,0x00,0x00,0x00,
-/* 0x41 */ 0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x42 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x66,0x66,0x66,0x66,0xFC,0x00,0x00,0x00,0x00,
-/* 0x43 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0x44 */ 0x00,0x00,0xF8,0x6C,0x66,0x66,0x66,0x66,0x66,0x66,0x6C,0xF8,0x00,0x00,0x00,0x00,
-/* 0x45 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x46 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x47 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xDE,0xC6,0xC6,0x66,0x3A,0x00,0x00,0x00,0x00,
-/* 0x48 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x49 */ 0x00,0x00,0x3C,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x4A */ 0x00,0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x4B */ 0x00,0x00,0xE6,0x66,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x4C */ 0x00,0x00,0xF0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x4D */ 0x00,0x00,0xC6,0xEE,0xFE,0xFE,0xD6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4E */ 0x00,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4F */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x50 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x51 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xDE,0x7C,0x0C,0x0E,0x00,0x00,
-/* 0x52 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x6C,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x53 */ 0x00,0x00,0x7C,0xC6,0xC6,0x60,0x38,0x0C,0x06,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x54 */ 0x00,0x00,0x7E,0x7E,0x5A,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x55 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x56 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x6C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x57 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0xEE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x58 */ 0x00,0x00,0xC6,0xC6,0x6C,0x7C,0x38,0x38,0x7C,0x6C,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x59 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5A */ 0x00,0x00,0xFE,0xC6,0x86,0x0C,0x18,0x30,0x60,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x5B */ 0x00,0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5C */ 0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x5D */ 0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5E */ 0x10,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x5F */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
-/* 0x60 */ 0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x61 */ 0x00,0x00,0x00,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x62 */ 0x00,0x00,0xE0,0x60,0x60,0x78,0x6C,0x66,0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,
-/* 0x63 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC0,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x64 */ 0x00,0x00,0x1C,0x0C,0x0C,0x3C,0x6C,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x65 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x66 */ 0x00,0x00,0x38,0x6C,0x64,0x60,0xF0,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x67 */ 0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,0x66,0x66,0x66,0x3E,0x06,0x66,0x3C,0x00,
-/* 0x68 */ 0x00,0x00,0xE0,0x60,0x60,0x6C,0x76,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x69 */ 0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6A */ 0x00,0x00,0x06,0x06,0x00,0x0E,0x06,0x06,0x06,0x06,0x06,0x06,0x66,0x66,0x3C,0x00,
-/* 0x6B */ 0x00,0x00,0xE0,0x60,0x60,0x66,0x6C,0x78,0x78,0x6C,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x6C */ 0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6D */ 0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xD6,0xD6,0xD6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x6E */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x6F */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x70 */ 0x00,0x00,0x00,0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0xF0,0x00,
-/* 0x71 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0x1E,0x00,
-/* 0x72 */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x76,0x66,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x73 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0x60,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x74 */ 0x00,0x00,0x10,0x30,0x30,0xFC,0x30,0x30,0x30,0x30,0x36,0x1C,0x00,0x00,0x00,0x00,
-/* 0x75 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x76 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x77 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x78 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0x6C,0x38,0x38,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,
-/* 0x79 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0xF8,0x00,
-/* 0x7A */ 0x00,0x00,0x00,0x00,0x00,0xFE,0xCC,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x7B */ 0x00,0x00,0x0E,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x0E,0x00,0x00,0x00,0x00,
-/* 0x7C */ 0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x7D */ 0x00,0x00,0x70,0x18,0x18,0x18,0x0E,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00,
-/* 0x7E */ 0x00,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x7F */ 0x00,0x00,0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x80 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x0C,0x06,0x7C,0x00,0x00,
-/* 0x81 */ 0x00,0x00,0xCC,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x82 */ 0x00,0x0C,0x18,0x30,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x83 */ 0x00,0x10,0x38,0x6C,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x84 */ 0x00,0x00,0xCC,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x85 */ 0x00,0x60,0x30,0x18,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x86 */ 0x00,0x38,0x6C,0x38,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x87 */ 0x00,0x00,0x00,0x00,0x3C,0x66,0x60,0x60,0x66,0x3C,0x0C,0x06,0x3C,0x00,0x00,0x00,
-/* 0x88 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x89 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8A */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8B */ 0x00,0x00,0x66,0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8C */ 0x00,0x18,0x3C,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8D */ 0x00,0x60,0x30,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8E */ 0x00,0xC6,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x8F */ 0x38,0x6C,0x38,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x90 */ 0x18,0x30,0x60,0x00,0xFE,0x66,0x60,0x7C,0x60,0x60,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x91 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0x76,0x36,0x7E,0xD8,0xD8,0x6E,0x00,0x00,0x00,0x00,
-/* 0x92 */ 0x00,0x00,0x3E,0x6C,0xCC,0xCC,0xFE,0xCC,0xCC,0xCC,0xCC,0xCE,0x00,0x00,0x00,0x00,
-/* 0x93 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x94 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x95 */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x96 */ 0x00,0x30,0x78,0xCC,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x97 */ 0x00,0x60,0x30,0x18,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x98 */ 0x00,0x00,0xC6,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0x78,0x00,
-/* 0x99 */ 0x00,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9A */ 0x00,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9B */ 0x00,0x18,0x18,0x3C,0x66,0x60,0x60,0x60,0x66,0x3C,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9C */ 0x00,0x38,0x6C,0x64,0x60,0xF8,0x60,0x60,0x60,0x60,0xE6,0xFC,0x00,0x00,0x00,0x00,
-/* 0x9D */ 0x00,0x00,0x66,0x66,0x3C,0x18,0x7E,0x18,0x7E,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9E */ 0x00,0xF8,0xCC,0xCC,0xF8,0xC4,0xCC,0xDE,0xCC,0xCC,0xCC,0xC6,0x00,0x00,0x00,0x00,
-/* 0x9F */ 0x00,0x0E,0x1B,0x18,0x18,0x18,0x7E,0x18,0x18,0x18,0x18,0x18,0xD8,0x70,0x00,0x00,
-/* 0xA0 */ 0x00,0x18,0x30,0x60,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA1 */ 0x00,0x0C,0x18,0x30,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0xA2 */ 0x00,0x18,0x30,0x60,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA3 */ 0x00,0x18,0x30,0x60,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA4 */ 0x00,0x00,0x76,0xDC,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0xA5 */ 0x76,0xDC,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xA6 */ 0x00,0x3C,0x6C,0x6C,0x3E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA7 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA8 */ 0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x60,0xC0,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
-/* 0xAA */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00,
-/* 0xAB */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x60,0xDC,0x86,0x0C,0x18,0x3E,0x00,0x00,
-/* 0xAC */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x66,0xCE,0x9E,0x3E,0x06,0x06,0x00,0x00,
-/* 0xAD */ 0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0xAE */ 0x00,0x00,0x00,0x00,0x00,0x36,0x6C,0xD8,0x6C,0x36,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xAF */ 0x00,0x00,0x00,0x00,0x00,0xD8,0x6C,0x36,0x6C,0xD8,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xB0 */ 0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,
-/* 0xB1 */ 0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,
-/* 0xB2 */ 0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,
-/* 0xB3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB4 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB5 */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB6 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB7 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB8 */ 0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB9 */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBA */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBB */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBC */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBD */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBE */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBF */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC0 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC1 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC4 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC6 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xC8 */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC9 */ 0x00,0x00,0x00,0x00,0x00,0x3F,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCA */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCB */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCC */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCD */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCE */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCF */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD0 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD1 */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD3 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD4 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD5 */ 0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD6 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD8 */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD9 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xDA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xDB */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDC */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDD */ 0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
-/* 0xDE */ 0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,
-/* 0xDF */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xE0 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0xD8,0xD8,0xD8,0xDC,0x76,0x00,0x00,0x00,0x00,
-/* 0xE1 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xFC,0xC6,0xC6,0xC6,0xC6,0xDC,0xC0,0xC0,0x00,0x00,
-/* 0xE2 */ 0x00,0x00,0xFE,0xC6,0xC6,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,
-/* 0xE3 */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0xE4 */ 0x00,0x00,0xFE,0xC6,0x60,0x30,0x18,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0xE5 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xD8,0xD8,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xE6 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0xC0,0x00,0x00,0x00,
-/* 0xE7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0xE8 */ 0x00,0x00,0x7E,0x18,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0xE9 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0xEA */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0x6C,0x6C,0x6C,0x6C,0xEE,0x00,0x00,0x00,0x00,
-/* 0xEB */ 0x00,0x00,0x1E,0x30,0x18,0x0C,0x3E,0x66,0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0xEC */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xDB,0xDB,0xDB,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xED */ 0x00,0x00,0x00,0x03,0x06,0x7E,0xDB,0xDB,0xF3,0x7E,0x60,0xC0,0x00,0x00,0x00,0x00,
-/* 0xEE */ 0x00,0x00,0x1C,0x30,0x60,0x60,0x7C,0x60,0x60,0x60,0x30,0x1C,0x00,0x00,0x00,0x00,
-/* 0xEF */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xF0 */ 0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0xF1 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
-/* 0xF2 */ 0x00,0x00,0x00,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF3 */ 0x00,0x00,0x00,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF4 */ 0x00,0x0E,0x1B,0x1B,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xF5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xF6 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7E,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0xF7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF8 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFB */ 0x00,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0xEC,0x6C,0x6C,0x3C,0x1C,0x00,0x00,0x00,0x00,
-/* 0xFC */ 0x00,0xD8,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFD */ 0x00,0x70,0xD8,0x30,0x60,0xC8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFE */ 0x00,0x00,0x00,0x00,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x00,0x00,0x00,0x00,0x00,
-};
diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h
deleted file mode 100644
index 6e5d540d8d3e..000000000000
--- a/arch/ppc/boot/include/mpc10x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
- * ctrl/EPIC/etc.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * This is a heavily stripped down version of:
- * include/asm-ppc/mpc10x.h
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __BOOT_MPC10X_H__
-#define __BOOT_MPC10X_H__
-
-/*
- * The values here don't completely map everything but should work in most
- * cases.
- *
- * MAP A (PReP Map)
- *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
- *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
- *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- *
- * MAP B (CHRP Map)
- *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
- *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
- *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- */
-
-/* Define the type of map to use */
-#define	MPC10X_MEM_MAP_A		1
-#define	MPC10X_MEM_MAP_B		2
-
-/* Map A (PReP Map) Defines */
-#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
-#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
-
-/* Map B (CHRP Map) Defines */
-#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
-#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
-
-/* Define offsets for the memory controller registers in the config space */
-#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
-
-#endif	/* __BOOT_MPC10X_H__ */
diff --git a/arch/ppc/boot/include/mpsc_defs.h b/arch/ppc/boot/include/mpsc_defs.h
deleted file mode 100644
index 9f37e1355b17..000000000000
--- a/arch/ppc/boot/include/mpsc_defs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/ppc/boot/include/mpsc_defs.h
- *
- * Register definitions for the Marvell Multi-Protocol Serial Controller (MPSC),
- * Serial DMA Controller (SDMA), and Baud Rate Generator (BRG).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef	_PPC_BOOT_MPSC_DEFS_H__
-#define	_PPC_BOOT_MPSC_DEFS_H__
-
-#define	MPSC_NUM_CTLRS		2
-
-/*
- *****************************************************************************
- *
- *	Multi-Protocol Serial Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* Main Configuratino Register Offsets */
-#define	MPSC_MMCRL			0x0000
-#define	MPSC_MMCRH			0x0004
-#define	MPSC_MPCR			0x0008
-#define	MPSC_CHR_1			0x000c
-#define	MPSC_CHR_2			0x0010
-#define	MPSC_CHR_3			0x0014
-#define	MPSC_CHR_4			0x0018
-#define	MPSC_CHR_5			0x001c
-#define	MPSC_CHR_6			0x0020
-#define	MPSC_CHR_7			0x0024
-#define	MPSC_CHR_8			0x0028
-#define	MPSC_CHR_9			0x002c
-#define	MPSC_CHR_10			0x0030
-#define	MPSC_CHR_11			0x0034
-
-#define	MPSC_MPCR_CL_5			0
-#define	MPSC_MPCR_CL_6			1
-#define	MPSC_MPCR_CL_7			2
-#define	MPSC_MPCR_CL_8			3
-#define	MPSC_MPCR_SBL_1			0
-#define	MPSC_MPCR_SBL_2			3
-
-#define	MPSC_CHR_2_TEV			(1<<1)
-#define	MPSC_CHR_2_TA			(1<<7)
-#define	MPSC_CHR_2_TTCS			(1<<9)
-#define	MPSC_CHR_2_REV			(1<<17)
-#define	MPSC_CHR_2_RA			(1<<23)
-#define	MPSC_CHR_2_CRD			(1<<25)
-#define	MPSC_CHR_2_EH			(1<<31)
-#define	MPSC_CHR_2_PAR_ODD		0
-#define	MPSC_CHR_2_PAR_SPACE		1
-#define	MPSC_CHR_2_PAR_EVEN		2
-#define	MPSC_CHR_2_PAR_MARK		3
-
-/* MPSC Signal Routing */
-#define	MPSC_MRR			0x0000
-#define	MPSC_RCRR			0x0004
-#define	MPSC_TCRR			0x0008
-
-/*
- *****************************************************************************
- *
- *	Serial DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define	SDMA_SDC			0x0000
-#define	SDMA_SDCM			0x0008
-#define	SDMA_RX_DESC			0x0800
-#define	SDMA_RX_BUF_PTR			0x0808
-#define	SDMA_SCRDP			0x0810
-#define	SDMA_TX_DESC			0x0c00
-#define	SDMA_SCTDP			0x0c10
-#define	SDMA_SFTDP			0x0c14
-
-#define	SDMA_DESC_CMDSTAT_PE		(1<<0)
-#define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
-#define	SDMA_DESC_CMDSTAT_FR		(1<<3)
-#define	SDMA_DESC_CMDSTAT_OR		(1<<6)
-#define	SDMA_DESC_CMDSTAT_BR		(1<<9)
-#define	SDMA_DESC_CMDSTAT_MI		(1<<10)
-#define	SDMA_DESC_CMDSTAT_A		(1<<11)
-#define	SDMA_DESC_CMDSTAT_AM		(1<<12)
-#define	SDMA_DESC_CMDSTAT_CT		(1<<13)
-#define	SDMA_DESC_CMDSTAT_C		(1<<14)
-#define	SDMA_DESC_CMDSTAT_ES		(1<<15)
-#define	SDMA_DESC_CMDSTAT_L		(1<<16)
-#define	SDMA_DESC_CMDSTAT_F		(1<<17)
-#define	SDMA_DESC_CMDSTAT_P		(1<<18)
-#define	SDMA_DESC_CMDSTAT_EI		(1<<23)
-#define	SDMA_DESC_CMDSTAT_O		(1<<31)
-
-#define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O |	\
-					SDMA_DESC_CMDSTAT_EI)
-
-#define	SDMA_SDC_RFT			(1<<0)
-#define	SDMA_SDC_SFM			(1<<1)
-#define	SDMA_SDC_BLMR			(1<<6)
-#define	SDMA_SDC_BLMT			(1<<7)
-#define	SDMA_SDC_POVR			(1<<8)
-#define	SDMA_SDC_RIFB			(1<<9)
-
-#define	SDMA_SDCM_ERD			(1<<7)
-#define	SDMA_SDCM_AR			(1<<15)
-#define	SDMA_SDCM_STD			(1<<16)
-#define	SDMA_SDCM_TXD			(1<<23)
-#define	SDMA_SDCM_AT			(1<<31)
-
-#define	SDMA_0_CAUSE_RXBUF		(1<<0)
-#define	SDMA_0_CAUSE_RXERR		(1<<1)
-#define	SDMA_0_CAUSE_TXBUF		(1<<2)
-#define	SDMA_0_CAUSE_TXEND		(1<<3)
-#define	SDMA_1_CAUSE_RXBUF		(1<<8)
-#define	SDMA_1_CAUSE_RXERR		(1<<9)
-#define	SDMA_1_CAUSE_TXBUF		(1<<10)
-#define	SDMA_1_CAUSE_TXEND		(1<<11)
-
-#define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
-	SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
-#define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
-	SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
-
-/* SDMA Interrupt registers */
-#define	SDMA_INTR_CAUSE			0x0000
-#define	SDMA_INTR_MASK			0x0080
-
-/*
- *****************************************************************************
- *
- *	Baud Rate Generator Interface Registers
- *
- *****************************************************************************
- */
-
-#define	BRG_BCR				0x0000
-#define	BRG_BTR				0x0004
-
-#endif /*_PPC_BOOT_MPSC_DEFS_H__ */
diff --git a/arch/ppc/boot/include/nonstdio.h b/arch/ppc/boot/include/nonstdio.h
deleted file mode 100644
index f2b5526faef3..000000000000
--- a/arch/ppc/boot/include/nonstdio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * This is sort of a catchall for I/O related functions.  Stuff that
- * wouldn't be in 'stdio.h' normally is here, and it's 'nonstdio.h'
- * for a reason.  -- Tom
- */
-typedef int FILE;
-extern FILE *stdin, *stdout;
-#define NULL ((void *)0)
-#define EOF (-1)
-#define fopen(n, m) NULL
-#define fflush(f) 0
-#define fclose(f) 0
-#define perror(s) printf("%s: no files!\n", (s))
-
-extern int getc(void);
-extern int printf(const char *format, ...);
-extern int sprintf(char *str, const char *format, ...);
-extern int tstc(void);
-extern void exit(void);
-extern void outb(int port, unsigned char val);
-extern void putc(const char c);
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-extern void udelay(long delay);
-extern unsigned char inb(int port);
-extern void board_isa_init(void);
-extern void ISA_init(unsigned long base);
diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h
deleted file mode 100644
index 4ed88acfa73a..000000000000
--- a/arch/ppc/boot/include/of1275.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-typedef void *prom_handle;
-typedef void *ihandle;
-typedef void *phandle;
-typedef int (*prom_entry)(void *);
-
-#define OF_INVALID_HANDLE	((prom_handle)-1UL)
-
-extern prom_entry of_prom_entry;
-
-/* function declarations */
-
-int	call_prom(const char *service, int nargs, int nret, ...);
-int	call_prom_ret(const char *service, int nargs, int nret,
-		      unsigned int *rets, ...);
-void *	claim(unsigned int virt, unsigned int size, unsigned int align);
-int	map(unsigned int phys, unsigned int virt, unsigned int size);
-void	enter(void);
-void	exit(void);
-phandle	finddevice(const char *name);
-int	getprop(phandle node, const char *name, void *buf, int buflen);
-void	ofinit(prom_entry entry);
-int	ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr);
-int	read(ihandle instance, void *buf, int buflen);
-void	release(void *virt, unsigned int size);
-int	write(ihandle instance, void *buf, int buflen);
-
-/* inlines */
-
-extern inline void pause(void)
-{
-	enter();
-}
diff --git a/arch/ppc/boot/include/rs6000.h b/arch/ppc/boot/include/rs6000.h
deleted file mode 100644
index 433f45084e41..000000000000
--- a/arch/ppc/boot/include/rs6000.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/* IBM RS/6000 "XCOFF" file definitions for BFD.
-   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-   FIXME: Can someone provide a transliteration of this name into ASCII?
-   Using the following chars caused a compiler warning on HIUX (so I replaced
-   them with octal escapes), and isn't useful without an understanding of what
-   character set it is.
-   Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM
-   and John Gilmore of Cygnus Support.  */
-
-/********************** FILE HEADER **********************/
-
-struct external_filehdr {
-	char f_magic[2];	/* magic number			*/
-	char f_nscns[2];	/* number of sections		*/
-	char f_timdat[4];	/* time & date stamp		*/
-	char f_symptr[4];	/* file pointer to symtab	*/
-	char f_nsyms[4];	/* number of symtab entries	*/
-	char f_opthdr[2];	/* sizeof(optional hdr)		*/
-	char f_flags[2];	/* flags			*/
-};
-
-        /* IBM RS/6000 */
-#define U802WRMAGIC     0730    /* writeable text segments **chh**      */
-#define U802ROMAGIC     0735    /* readonly sharable text segments      */
-#define U802TOCMAGIC    0737    /* readonly text segments and TOC       */
-
-#define BADMAG(x)	\
-	((x).f_magic != U802ROMAGIC && (x).f_magic != U802WRMAGIC && \
-	 (x).f_magic != U802TOCMAGIC)
-
-#define	FILHDR	struct external_filehdr
-#define	FILHSZ	20
-
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-
-typedef struct
-{
-  unsigned char	magic[2];	/* type of file			*/
-  unsigned char	vstamp[2];	/* version stamp		*/
-  unsigned char	tsize[4];	/* text size in bytes, padded to FW bdry */
-  unsigned char	dsize[4];	/* initialized data "  "	*/
-  unsigned char	bsize[4];	/* uninitialized data "   "	*/
-  unsigned char	entry[4];	/* entry pt.			*/
-  unsigned char	text_start[4];	/* base of text used for this file */
-  unsigned char	data_start[4];	/* base of data used for this file */
-  unsigned char	o_toc[4];	/* address of TOC */
-  unsigned char	o_snentry[2];	/* section number of entry point */
-  unsigned char	o_sntext[2];	/* section number of .text section */
-  unsigned char	o_sndata[2];	/* section number of .data section */
-  unsigned char	o_sntoc[2];	/* section number of TOC */
-  unsigned char	o_snloader[2];	/* section number of .loader section */
-  unsigned char	o_snbss[2];	/* section number of .bss section */
-  unsigned char	o_algntext[2];	/* .text alignment */
-  unsigned char	o_algndata[2];	/* .data alignment */
-  unsigned char	o_modtype[2];	/* module type (??) */
-  unsigned char o_cputype[2];	/* cpu type */
-  unsigned char	o_maxstack[4];	/* max stack size (??) */
-  unsigned char o_maxdata[4];	/* max data size (??) */
-  unsigned char	o_resv2[12];	/* reserved */
-}
-AOUTHDR;
-
-#define AOUTSZ 72
-#define SMALL_AOUTSZ (28)
-#define AOUTHDRSZ 72
-
-#define	RS6K_AOUTHDR_OMAGIC	0x0107	/* old: text & data writeable */
-#define	RS6K_AOUTHDR_NMAGIC	0x0108	/* new: text r/o, data r/w */
-#define	RS6K_AOUTHDR_ZMAGIC	0x010B	/* paged: text r/o, both page-aligned */
-
-
-/********************** SECTION HEADER **********************/
-
-
-struct external_scnhdr {
-	char		s_name[8];	/* section name			*/
-	char		s_paddr[4];	/* physical address, aliased s_nlib */
-	char		s_vaddr[4];	/* virtual address		*/
-	char		s_size[4];	/* section size			*/
-	char		s_scnptr[4];	/* file ptr to raw data for section */
-	char		s_relptr[4];	/* file ptr to relocation	*/
-	char		s_lnnoptr[4];	/* file ptr to line numbers	*/
-	char		s_nreloc[2];	/* number of relocation entries	*/
-	char		s_nlnno[2];	/* number of line number entries*/
-	char		s_flags[4];	/* flags			*/
-};
-
-/*
- * names of "special" sections
- */
-#define _TEXT	".text"
-#define _DATA	".data"
-#define _BSS	".bss"
-#define _PAD	".pad"
-#define _LOADER	".loader"
-
-#define	SCNHDR	struct external_scnhdr
-#define	SCNHSZ	40
-
-/* XCOFF uses a special .loader section with type STYP_LOADER.  */
-#define STYP_LOADER 0x1000
-
-/* XCOFF uses a special .debug section with type STYP_DEBUG.  */
-#define STYP_DEBUG 0x2000
-
-/* XCOFF handles line number or relocation overflow by creating
-   another section header with STYP_OVRFLO set.  */
-#define STYP_OVRFLO 0x8000
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-struct external_lineno {
-	union {
-		char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-		char l_paddr[4];	/* (physical) address of line number	*/
-	} l_addr;
-	char l_lnno[2];	/* line number		*/
-};
-
-
-#define	LINENO	struct external_lineno
-#define	LINESZ	6
-
-
-/********************** SYMBOLS **********************/
-
-#define E_SYMNMLEN	8	/* # characters in a symbol name	*/
-#define E_FILNMLEN	14	/* # characters in a file name		*/
-#define E_DIMNUM	4	/* # array dimensions in auxiliary entry */
-
-struct external_syment
-{
-  union {
-    char e_name[E_SYMNMLEN];
-    struct {
-      char e_zeroes[4];
-      char e_offset[4];
-    } e;
-  } e;
-  char e_value[4];
-  char e_scnum[2];
-  char e_type[2];
-  char e_sclass[1];
-  char e_numaux[1];
-};
-
-
-
-#define N_BTMASK	(017)
-#define N_TMASK		(060)
-#define N_BTSHFT	(4)
-#define N_TSHIFT	(2)
-
-
-union external_auxent {
-	struct {
-		char x_tagndx[4];	/* str, un, or enum tag indx */
-		union {
-			struct {
-			    char  x_lnno[2]; /* declaration line number */
-			    char  x_size[2]; /* str/union/array size */
-			} x_lnsz;
-			char x_fsize[4];	/* size of function */
-		} x_misc;
-		union {
-			struct {		/* if ISFCN, tag, or .bb */
-			    char x_lnnoptr[4];	/* ptr to fcn line # */
-			    char x_endndx[4];	/* entry ndx past block end */
-			} x_fcn;
-			struct {		/* if ISARY, up to 4 dimen. */
-			    char x_dimen[E_DIMNUM][2];
-			} x_ary;
-		} x_fcnary;
-		char x_tvndx[2];		/* tv index */
-	} x_sym;
-
-	union {
-		char x_fname[E_FILNMLEN];
-		struct {
-			char x_zeroes[4];
-			char x_offset[4];
-		} x_n;
-	} x_file;
-
-	struct {
-		char x_scnlen[4];			/* section length */
-		char x_nreloc[2];	/* # relocation entries */
-		char x_nlinno[2];	/* # line numbers */
-	} x_scn;
-
-        struct {
-		char x_tvfill[4];	/* tv fill value */
-		char x_tvlen[2];	/* length of .tv */
-		char x_tvran[2][2];	/* tv range */
-	} x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-
-	struct {
-		unsigned char x_scnlen[4];
-		unsigned char x_parmhash[4];
-		unsigned char x_snhash[2];
-		unsigned char x_smtyp[1];
-		unsigned char x_smclas[1];
-		unsigned char x_stab[4];
-		unsigned char x_snstab[2];
-	} x_csect;
-
-};
-
-#define	SYMENT	struct external_syment
-#define	SYMESZ	18
-#define	AUXENT	union external_auxent
-#define	AUXESZ	18
-#define DBXMASK 0x80		/* for dbx storage mask */
-#define SYMNAME_IN_DEBUG(symptr) ((symptr)->n_sclass & DBXMASK)
-
-
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-
-struct external_reloc {
-  char r_vaddr[4];
-  char r_symndx[4];
-  char r_size[1];
-  char r_type[1];
-};
-
-
-#define RELOC struct external_reloc
-#define RELSZ 10
-
-#define DEFAULT_DATA_SECTION_ALIGNMENT 4
-#define DEFAULT_BSS_SECTION_ALIGNMENT 4
-#define DEFAULT_TEXT_SECTION_ALIGNMENT 4
-/* For new sections we havn't heard of before */
-#define DEFAULT_SECTION_ALIGNMENT 4
diff --git a/arch/ppc/boot/include/serial.h b/arch/ppc/boot/include/serial.h
deleted file mode 100644
index d710eabb4256..000000000000
--- a/arch/ppc/boot/include/serial.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * A really private header file for the (dumb) serial driver in arch/ppc/boot
- *
- * Shamelessly taken from include/linux/serialP.h:
- *
- * Copyright (C) 1997 by Theodore Ts'o.
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- */
-
-#ifndef _PPC_BOOT_SERIALP_H
-#define _PPC_BOOT_SERIALP_H
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * Given that this is how SERIAL_PORT_DFNS are done, and that we need
- * to use a few of their fields, we need to have our own copy of it.
- */
-struct serial_state {
-	int	magic;
-	int	baud_base;
-	unsigned long	port;
-	int	irq;
-	int	flags;
-	int	hub6;
-	int	type;
-	int	line;
-	int	revision;	/* Chip revision (950) */
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	count;
-	u8	*iomem_base;
-	u16	iomem_reg_shift;
-	unsigned short	close_delay;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned long	icount;
-	int	io_type;
-	void    *info;
-	void    *dev;
-};
-#endif /* _PPC_BOOT_SERIAL_H */
diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script
deleted file mode 100644
index d4dd8f15395e..000000000000
--- a/arch/ppc/boot/ld.script
+++ /dev/null
@@ -1,85 +0,0 @@
-OUTPUT_ARCH(powerpc:common)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    *(.text)
-    *(.fixup)
-    __relocate_start = .;
-    *(.relocate_code)
-    __relocate_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.data.boot)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    *(.rodata)
-    *(.rodata.*)
-    *(.rodata1)
-    *(.got1)
-    __image_begin = .;
-    *(.image)
-    __image_end = .;
-    . = ALIGN(4096);
-    __ramdisk_begin = .;
-    *(.ramdisk)
-    __ramdisk_end = .;
-    . = ALIGN(4096);
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(4096);
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-
-  /DISCARD/ : {
-    *(__ksymtab)
-    *(__ksymtab_strings)
-    *(__bug_table)
-    *(__kcrctab)
-  }
-
-}
diff --git a/arch/ppc/boot/lib/.gitignore b/arch/ppc/boot/lib/.gitignore
deleted file mode 100644
index 1629a6167755..000000000000
--- a/arch/ppc/boot/lib/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-inffast.c
-inflate.c
-inftrees.c
diff --git a/arch/ppc/boot/lib/Makefile b/arch/ppc/boot/lib/Makefile
deleted file mode 100644
index 2f995f712ec5..000000000000
--- a/arch/ppc/boot/lib/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for some libs needed by zImage.
-#
-
-CFLAGS_kbd.o	:= -Idrivers/char
-CFLAGS_vreset.o := -Iarch/ppc/boot/include
-
-zlib  := inffast.c inflate.c inftrees.c
-	 
-lib-y += $(zlib:.c=.o) div64.o
-lib-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o
-
-
-# zlib files needs header from their original place
-EXTRA_CFLAGS += -Ilib/zlib_inflate
-
-quiet_cmd_copy_zlib = COPY    $@
-      cmd_copy_zlib = cat $< > $@
-
-$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
-	$(call cmd,copy_zlib)
-
-clean-files := $(zlib)
diff --git a/arch/ppc/boot/lib/div64.S b/arch/ppc/boot/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/boot/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/boot/lib/kbd.c b/arch/ppc/boot/lib/kbd.c
deleted file mode 100644
index 3931727434de..000000000000
--- a/arch/ppc/boot/lib/kbd.c
+++ /dev/null
@@ -1,248 +0,0 @@
-#include <linux/keyboard.h>
-
-#include "defkeymap.c"	/* yeah I know it's bad -- Cort */
-
-
-unsigned char shfts, ctls, alts, caps;
-
-#define	KBDATAP		0x60	/* kbd data port */
-#define	KBSTATUSPORT	0x61	/* kbd status */
-#define	KBSTATP		0x64	/* kbd status port */
-#define	KBINRDY		0x01
-#define	KBOUTRDY	0x02
-
-extern unsigned char inb(int port);
-extern void outb(int port, char val);
-extern void puts(const char *);
-extern void puthex(unsigned long val);
-extern void udelay(long x);
-
-static int kbd(int noblock)
-{
-	unsigned char dt, brk, val;
-	unsigned code;
-loop:
-	if (noblock) {
-	    if ((inb(KBSTATP) & KBINRDY) == 0)
-		return (-1);
-	} else while((inb(KBSTATP) & KBINRDY) == 0) ;
-
-	dt = inb(KBDATAP);
-
-	brk = dt & 0x80;	/* brk == 1 on key release */
-	dt = dt & 0x7f;		/* keycode */
-
-	if (shfts)
-	    code = shift_map[dt];
-	else if (ctls)
-	    code = ctrl_map[dt];
-	else
-	    code = plain_map[dt];
-
-	val = KVAL(code);
-	switch (KTYP(code) & 0x0f) {
-	    case KT_LATIN:
-		if (brk)
-		    break;
-		if (alts)
-		    val |= 0x80;
-		if (val == 0x7f)	/* map delete to backspace */
-		    val = '\b';
-		return val;
-
-	    case KT_LETTER:
-		if (brk)
-		    break;
-		if (caps)
-		    val -= 'a'-'A';
-		return val;
-
-	    case KT_SPEC:
-		if (brk)
-		    break;
-		if (val == KVAL(K_CAPS))
-		    caps = !caps;
-		else if (val == KVAL(K_ENTER)) {
-enter:		    /* Wait for key up */
-		    while (1) {
-			while((inb(KBSTATP) & KBINRDY) == 0) ;
-			dt = inb(KBDATAP);
-			if (dt & 0x80) /* key up */ break;
-		    }
-		    return 10;
-		}
-		break;
-
-	    case KT_PAD:
-		if (brk)
-		    break;
-		if (val < 10)
-		    return val;
-		if (val == KVAL(K_PENTER))
-		    goto enter;
-		break;
-
-	    case KT_SHIFT:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			shfts = brk ? 0 : 1;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			alts = brk ? 0 : 1;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			ctls = brk ? 0 : 1;
-			break;
-		}
-		break;
-
-	    case KT_LOCK:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			if (brk)
-			    shfts = !shfts;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			if (brk)
-			    alts = !alts;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			if (brk)
-			    ctls = !ctls;
-			break;
-		}
-		break;
-	}
-	if (brk) return (-1);  /* Ignore initial 'key up' codes */
-	goto loop;
-}
-
-static int __kbdreset(void)
-{
-	unsigned char c;
-	int i, t;
-
-	/* flush input queue */
-	t = 2000;
-	while ((inb(KBSTATP) & KBINRDY))
-	{
-		(void)inb(KBDATAP);
-		if (--t == 0)
-			return 1;
-	}
-	/* Send self-test */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0)
-			return 2;
-	outb(KBSTATP,0xAA);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0)
-			return 3;
-	if ((c = inb(KBDATAP)) != 0x55)
-	{
-		puts("Keyboard self test failed - result:");
-		puthex(c);
-		puts("\n");
-	}
-	/* Enable interrupts and keyboard controller */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 4;
-	outb(KBSTATP,0x60);
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 5;
-	outb(KBDATAP,0x45);
-	for (i = 0;  i < 10000;  i++) udelay(1);
-
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 6;
-	outb(KBSTATP,0x20);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0) return 7;
-	if (! (inb(KBDATAP) & 0x40)) {
-		/*
-		 * Quote from PS/2 System Reference Manual:
-		 *
-		 * "Address hex 0060 and address hex 0064 should be
-		 * written only when the input-buffer-full bit and
-		 * output-buffer-full bit in the Controller Status
-		 * register are set 0." (KBINRDY and KBOUTRDY)
-		 */
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 8;
-		outb(KBDATAP,0xF0);
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 9;
-		outb(KBDATAP,0x01);
-	}
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 10;
-	outb(KBSTATP,0xAE);
-	return 0;
-}
-
-static void kbdreset(void)
-{
-	int ret = __kbdreset();
-
-	if (ret) {
-		puts("__kbdreset failed: ");
-		puthex(ret);
-		puts("\n");
-	}
-}
-
-/* We have to actually read the keyboard when CRT_tstc is called,
- * since the pending data might be a key release code, and therefore
- * not valid data.  In this case, kbd() will return -1, even though there's
- * data to be read.  Of course, we might actually read a valid key press,
- * in which case it gets queued into key_pending for use by CRT_getc.
- */
-
-static int kbd_reset = 0;
-
-static int key_pending = -1;
-
-int CRT_getc(void)
-{
-	int c;
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        if (key_pending != -1) {
-                c = key_pending;
-                key_pending = -1;
-                return c;
-        } else {
-	while ((c = kbd(0)) == 0) ;
-                return c;
-        }
-}
-
-int CRT_tstc(void)
-{
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        while (key_pending == -1 && ((inb(KBSTATP) & KBINRDY) != 0)) {
-                key_pending = kbd(1);
-        }
-
-        return (key_pending != -1);
-}
diff --git a/arch/ppc/boot/lib/vreset.c b/arch/ppc/boot/lib/vreset.c
deleted file mode 100644
index 98539e9f7f96..000000000000
--- a/arch/ppc/boot/lib/vreset.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * vreset.c
- *
- * Initialize the VGA control registers to 80x25 text mode.
- *
- * Adapted from a program by:
- *                                      Steve Sellgren
- *                                      San Francisco Indigo Company
- *                                      sfindigo!sellgren@uunet.uu.net
- *
- * Original concept by:
- *                                      Gary Thomas <gdt@linuxppc.org>
- * Adapted for Moto boxes by:
- *                                      Pat Kane & Mark Scott, 1996
- * Adapted for IBM portables by:
- *                                      Takeshi Ishimoto
- * Multi-console support:
- *                                      Terje Malmedal <terje.malmedal@usit.uio.no>
- */
-
-#include "iso_font.h"
-#include "nonstdio.h"
-
-extern char *vidmem;
-extern int lines, cols;
-struct VaRegs;
-
-/*
- * VGA Register
- */
-struct VgaRegs
-{
-	unsigned short io_port;
-	unsigned char  io_index;
-	unsigned char  io_value;
-};
-
-void unlockVideo(int slot);
-void setTextRegs(struct VgaRegs *svp);
-void setTextCLUT(int shift);
-void clearVideoMemory(void);
-void loadFont(unsigned char *ISA_mem);
-
-static void mdelay(int ms)
-{
-	for (; ms > 0; --ms)
-		udelay(1000);
-}
-
-/*
- * Default console text mode registers  used to reset
- * graphics adapter.
- */
-#define NREGS 54
-#define ENDMK  0xFFFF  /* End marker */
-
-#define S3Vendor	0x5333
-#define CirrusVendor    0x1013
-#define DiamondVendor   0x100E
-#define MatroxVendor    0x102B
-#define ParadiseVendor  0x101C
-
-struct VgaRegs GenVgaTextRegs[NREGS+1] = {
-	/* port		index	value  */
-	/* SR Regs */
-	{ 0x3c4,	0x1,	0x0 },
-	{ 0x3c4,	0x2,	0x3 },
-	{ 0x3c4,	0x3,	0x0 },
-	{ 0x3c4,	0x4,	0x2 },
-	 /* CR Regs */
-	{ 0x3d4,	0x0,	0x5f },
-	{ 0x3d4,	0x1,	0x4f },
-	{ 0x3d4,	0x2,	0x50 },
-	{ 0x3d4,	0x3,	0x82 },
-	{ 0x3d4,	0x4,	0x55 },
-	{ 0x3d4,	0x5,	0x81 },
-	{ 0x3d4,	0x6,	0xbf },
-	{ 0x3d4,	0x7,	0x1f },
-	{ 0x3d4,	0x8,	0x00 },
-	{ 0x3d4,	0x9,	0x4f },
-	{ 0x3d4,	0xa,	0x0d },
-	{ 0x3d4,	0xb,	0x0e },
-	{ 0x3d4,	0xc,	0x00 },
-	{ 0x3d4,	0xd,	0x00 },
-	{ 0x3d4,	0xe,	0x00 },
-	{ 0x3d4,	0xf,	0x00 },
-	{ 0x3d4,	0x10,	0x9c },
-	{ 0x3d4,	0x11,	0x8e },
-	{ 0x3d4,	0x12,	0x8f },
-	{ 0x3d4,	0x13,	0x28 },
-	{ 0x3d4,	0x14,	0x1f },
-	{ 0x3d4,	0x15,	0x96 },
-	{ 0x3d4,	0x16,	0xb9 },
-	{ 0x3d4,	0x17,	0xa3 },
-	 /* GR Regs */
-	{ 0x3ce,	0x0,	0x0 },
-	{ 0x3ce,	0x1,	0x0 },
-	{ 0x3ce,	0x2,	0x0 },
-	{ 0x3ce,	0x3,	0x0 },
-	{ 0x3ce,	0x4,	0x0 },
-	{ 0x3ce,	0x5,	0x10 },
-	{ 0x3ce,	0x6,	0xe },
-	{ 0x3ce,	0x7,	0x0 },
-	{ 0x3ce,	0x8,	0xff },
-	{ ENDMK }
-};
-
-struct RGBColors
-{
-  unsigned char r, g, b;
-};
-
-/*
- * Default console text mode color table.
- * These values were obtained by booting Linux with
- * text mode firmware & then dumping the registers.
- */
-struct RGBColors TextCLUT[256] =
-{
-	/* red	green	blue  */
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x2a },
-	{ 0x0,	0x2a,	0x0 },
-	{ 0x0,	0x2a,	0x2a },
-	{ 0x2a,	0x0,	0x0 },
-	{ 0x2a,	0x0,	0x2a },
-	{ 0x2a,	0x2a,	0x0 },
-	{ 0x2a,	0x2a,	0x2a },
-	{ 0x0,	0x0,	0x15 },
-	{ 0x0,	0x0,	0x3f },
-	{ 0x0,	0x2a,	0x15 },
-	{ 0x0,	0x2a,	0x3f },
-	{ 0x2a,	0x0,	0x15 },
-	{ 0x2a,	0x0,	0x3f },
-	{ 0x2a,	0x2a,	0x15 },
-	{ 0x2a,	0x2a,	0x3f },
-	{ 0x0,	0x15,	0x0 },
-	{ 0x0,	0x15,	0x2a },
-	{ 0x0,	0x3f,	0x0 },
-	{ 0x0,	0x3f,	0x2a },
-	{ 0x2a,	0x15,	0x0 },
-	{ 0x2a,	0x15,	0x2a },
-	{ 0x2a,	0x3f,	0x0 },
-	{ 0x2a,	0x3f,	0x2a },
-	{ 0x0,	0x15,	0x15 },
-	{ 0x0,	0x15,	0x3f },
-	{ 0x0,	0x3f,	0x15 },
-	{ 0x0,	0x3f,	0x3f },
-	{ 0x2a,	0x15,	0x15 },
-	{ 0x2a,	0x15,	0x3f },
-	{ 0x2a,	0x3f,	0x15 },
-	{ 0x2a,	0x3f,	0x3f },
-	{ 0x15,	0x0,	0x0 },
-	{ 0x15,	0x0,	0x2a },
-	{ 0x15,	0x2a,	0x0 },
-	{ 0x15,	0x2a,	0x2a },
-	{ 0x3f,	0x0,	0x0 },
-	{ 0x3f,	0x0,	0x2a },
-	{ 0x3f,	0x2a,	0x0 },
-	{ 0x3f,	0x2a,	0x2a },
-	{ 0x15,	0x0,	0x15 },
-	{ 0x15,	0x0,	0x3f },
-	{ 0x15,	0x2a,	0x15 },
-	{ 0x15,	0x2a,	0x3f },
-	{ 0x3f,	0x0,	0x15 },
-	{ 0x3f,	0x0,	0x3f },
-	{ 0x3f,	0x2a,	0x15 },
-	{ 0x3f,	0x2a,	0x3f },
-	{ 0x15,	0x15,	0x0 },
-	{ 0x15,	0x15,	0x2a },
-	{ 0x15,	0x3f,	0x0 },
-	{ 0x15,	0x3f,	0x2a },
-	{ 0x3f,	0x15,	0x0 },
-	{ 0x3f,	0x15,	0x2a },
-	{ 0x3f,	0x3f,	0x0 },
-	{ 0x3f,	0x3f,	0x2a },
-	{ 0x15,	0x15,	0x15 },
-	{ 0x15,	0x15,	0x3f },
-	{ 0x15,	0x3f,	0x15 },
-	{ 0x15,	0x3f,	0x3f },
-	{ 0x3f,	0x15,	0x15 },
-	{ 0x3f,	0x15,	0x3f },
-	{ 0x3f,	0x3f,	0x15 },
-	{ 0x3f,	0x3f,	0x3f },
-	{ 0x39,	0xc,	0x5 },
-	{ 0x15,	0x2c,	0xf },
-	{ 0x26,	0x10,	0x3d },
-	{ 0x29,	0x29,	0x38 },
-	{ 0x4,	0x1a,	0xe },
-	{ 0x2,	0x1e,	0x3a },
-	{ 0x3c,	0x25,	0x33 },
-	{ 0x3c,	0xc,	0x2c },
-	{ 0x3f,	0x3,	0x2b },
-	{ 0x1c,	0x9,	0x13 },
-	{ 0x25,	0x2a,	0x35 },
-	{ 0x1e,	0xa,	0x38 },
-	{ 0x24,	0x8,	0x3 },
-	{ 0x3,	0xe,	0x36 },
-	{ 0xc,	0x6,	0x2a },
-	{ 0x26,	0x3,	0x32 },
-	{ 0x5,	0x2f,	0x33 },
-	{ 0x3c,	0x35,	0x2f },
-	{ 0x2d,	0x26,	0x3e },
-	{ 0xd,	0xa,	0x10 },
-	{ 0x25,	0x3c,	0x11 },
-	{ 0xd,	0x4,	0x2e },
-	{ 0x5,	0x19,	0x3e },
-	{ 0xc,	0x13,	0x34 },
-	{ 0x2b,	0x6,	0x24 },
-	{ 0x4,	0x3,	0xd },
-	{ 0x2f,	0x3c,	0xc },
-	{ 0x2a,	0x37,	0x1f },
-	{ 0xf,	0x12,	0x38 },
-	{ 0x38,	0xe,	0x2a },
-	{ 0x12,	0x2f,	0x19 },
-	{ 0x29,	0x2e,	0x31 },
-	{ 0x25,	0x13,	0x3e },
-	{ 0x33,	0x3e,	0x33 },
-	{ 0x1d,	0x2c,	0x25 },
-	{ 0x15,	0x15,	0x5 },
-	{ 0x32,	0x25,	0x39 },
-	{ 0x1a,	0x7,	0x1f },
-	{ 0x13,	0xe,	0x1d },
-	{ 0x36,	0x17,	0x34 },
-	{ 0xf,	0x15,	0x23 },
-	{ 0x2,	0x35,	0xd },
-	{ 0x15,	0x3f,	0xc },
-	{ 0x14,	0x2f,	0xf },
-	{ 0x19,	0x21,	0x3e },
-	{ 0x27,	0x11,	0x2f },
-	{ 0x38,	0x3f,	0x3c },
-	{ 0x36,	0x2d,	0x15 },
-	{ 0x16,	0x17,	0x2 },
-	{ 0x1,	0xa,	0x3d },
-	{ 0x1b,	0x11,	0x3f },
-	{ 0x21,	0x3c,	0xd },
-	{ 0x1a,	0x39,	0x3d },
-	{ 0x8,	0xe,	0xe },
-	{ 0x22,	0x21,	0x23 },
-	{ 0x1e,	0x30,	0x5 },
-	{ 0x1f,	0x22,	0x3d },
-	{ 0x1e,	0x2f,	0xa },
-	{ 0x0,	0x1c,	0xe },
-	{ 0x0,	0x1c,	0x15 },
-	{ 0x0,	0x1c,	0x1c },
-	{ 0x0,	0x15,	0x1c },
-	{ 0x0,	0xe,	0x1c },
-	{ 0x0,	0x7,	0x1c },
-	{ 0xe,	0xe,	0x1c },
-	{ 0x11,	0xe,	0x1c },
-	{ 0x15,	0xe,	0x1c },
-	{ 0x18,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x18 },
-	{ 0x1c,	0xe,	0x15 },
-	{ 0x1c,	0xe,	0x11 },
-	{ 0x1c,	0xe,	0xe },
-	{ 0x1c,	0x11,	0xe },
-	{ 0x1c,	0x15,	0xe },
-	{ 0x1c,	0x18,	0xe },
-	{ 0x1c,	0x1c,	0xe },
-	{ 0x18,	0x1c,	0xe },
-	{ 0x15,	0x1c,	0xe },
-	{ 0x11,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0x11 },
-	{ 0xe,	0x1c,	0x15 },
-	{ 0xe,	0x1c,	0x18 },
-	{ 0xe,	0x1c,	0x1c },
-	{ 0xe,	0x18,	0x1c },
-	{ 0xe,	0x15,	0x1c },
-	{ 0xe,	0x11,	0x1c },
-	{ 0x14,	0x14,	0x1c },
-	{ 0x16,	0x14,	0x1c },
-	{ 0x18,	0x14,	0x1c },
-	{ 0x1a,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1a },
-	{ 0x1c,	0x14,	0x18 },
-	{ 0x1c,	0x14,	0x16 },
-	{ 0x1c,	0x14,	0x14 },
-	{ 0x1c,	0x16,	0x14 },
-	{ 0x1c,	0x18,	0x14 },
-	{ 0x1c,	0x1a,	0x14 },
-	{ 0x1c,	0x1c,	0x14 },
-	{ 0x1a,	0x1c,	0x14 },
-	{ 0x18,	0x1c,	0x14 },
-	{ 0x16,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x16 },
-	{ 0x14,	0x1c,	0x18 },
-	{ 0x14,	0x1c,	0x1a },
-	{ 0x14,	0x1c,	0x1c },
-	{ 0x14,	0x1a,	0x1c },
-	{ 0x14,	0x18,	0x1c },
-	{ 0x14,	0x16,	0x1c },
-	{ 0x0,	0x0,	0x10 },
-	{ 0x4,	0x0,	0x10 },
-	{ 0x8,	0x0,	0x10 },
-	{ 0xc,	0x0,	0x10 },
-	{ 0x10,	0x0,	0x10 },
-	{ 0x10,	0x0,	0xc },
-	{ 0x10,	0x0,	0x8 },
-	{ 0x10,	0x0,	0x4 },
-	{ 0x10,	0x0,	0x0 },
-	{ 0x10,	0x4,	0x0 },
-	{ 0x10,	0x8,	0x0 },
-	{ 0x10,	0xc,	0x0 },
-	{ 0x10,	0x10,	0x0 },
-	{ 0xc,	0x10,	0x0 },
-	{ 0x8,	0x10,	0x0 },
-	{ 0x4,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x4 },
-	{ 0x0,	0x10,	0x8 },
-	{ 0x0,	0x10,	0xc },
-	{ 0x0,	0x10,	0x10 },
-	{ 0x0,	0xc,	0x10 },
-	{ 0x0,	0x8,	0x10 },
-	{ 0x0,	0x4,	0x10 },
-	{ 0x8,	0x8,	0x10 },
-	{ 0xa,	0x8,	0x10 },
-	{ 0xc,	0x8,	0x10 },
-	{ 0xe,	0x8,	0x10 },
-	{ 0x10,	0x8,	0x10 },
-	{ 0x10,	0x8,	0xe },
-	{ 0x10,	0x8,	0xc },
-	{ 0x10,	0x8,	0xa },
-	{ 0x10,	0x8,	0x8 },
-	{ 0x10,	0xa,	0x8 },
-	{ 0x10,	0xc,	0x8 },
-	{ 0x10,	0xe,	0x8 },
-	{ 0x10,	0x10,	0x8 },
-	{ 0xe,	0x10,	0x8 },
-	{ 0xc,	0x10,	0x8 },
-	{ 0xa,	0x10,	0x8 },
-	{ 0x8,	0x10,	0x8 },
-	{ 0x8,	0x10,	0xa },
-	{ 0x8,	0x10,	0xc },
-	{ 0x8,	0x10,	0xe },
-	{ 0x8,	0x10,	0x10 },
-	{ 0x8,	0xe,	0x10 },
-	{ 0x8,	0xc,	0x10 },
-	{ 0x8,	0xa,	0x10 },
-	{ 0xb,	0xb,	0x10 },
-	{ 0xc,	0xb,	0x10 },
-	{ 0xd,	0xb,	0x10 },
-	{ 0xf,	0xb,	0x10 },
-	{ 0x10,	0xb,	0x10 },
-	{ 0x10,	0xb,	0xf },
-	{ 0x10,	0xb,	0xd },
-	{ 0x10,	0xb,	0xc },
-	{ 0x10,	0xb,	0xb },
-	{ 0x10,	0xc,	0xb },
-	{ 0x10,	0xd,	0xb },
-	{ 0x10,	0xf,	0xb },
-	{ 0x10,	0x10,	0xb },
-	{ 0xf,	0x10,	0xb },
-	{ 0xd,	0x10,	0xb },
-	{ 0xc,	0x10,	0xb },
-	{ 0xb,	0x10,	0xb },
-	{ 0xb,	0x10,	0xc },
-	{ 0xb,	0x10,	0xd },
-	{ 0xb,	0x10,	0xf },
-	{ 0xb,	0x10,	0x10 },
-	{ 0xb,	0xf,	0x10 },
-	{ 0xb,	0xd,	0x10 },
-	{ 0xb,	0xc,	0x10 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 }
-};
-
-unsigned char AC[21] = {
-    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-    0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
-    0x0C, 0x00, 0x0F, 0x08, 0x00};
-
-static int scanPCI(int start_slt);
-static int PCIVendor(int);
-#ifdef DEBUG
-static void printslots(void);
-#endif
-extern void puthex(unsigned long);
-extern void puts(const char *);
-static void unlockS3(void);
-
-static inline void
-outw(int port, unsigned short val)
-{
-	outb(port, val >> 8);
-	outb(port+1, val);
-}
-
-int
-vga_init(unsigned char *ISA_mem)
-{
-	int slot;
-	struct VgaRegs *VgaTextRegs;
-
-	/* See if VGA already in TEXT mode - exit if so! */
-	outb(0x3CE, 0x06);
-	if ((inb(0x3CF) & 0x01) == 0){
-		puts("VGA already in text mode\n");
-		return 0;
-	}
-
-	/* If no VGA responding in text mode, then we have some work to do...
-	 */
-	slot = -1;
-	while((slot = scanPCI(slot)) > -1) { /* find video card in use  */
-		unlockVideo(slot);           /* enable I/O to card      */
-		VgaTextRegs = GenVgaTextRegs;
-
-		switch (PCIVendor(slot)) {
-		default:
-			break;
-		case(S3Vendor):
-			unlockS3();
-			break;
-
-		case(CirrusVendor):
-			outw(0x3C4, 0x0612);       /* unlock ext regs */
-			outw(0x3C4, 0x0700);       /* reset ext sequence mode */
-			break;
-
-		case(ParadiseVendor):                 /* IBM Portable 850 */
-			outw(0x3ce, 0x0f05);      /* unlock pardise registers */
-			outw(0x3c4, 0x0648);
-			outw(0x3d4, 0x2985);
-			outw(0x3d4, 0x34a6);
-			outb(0x3ce, 0x0b);       /* disable linear addressing */
-			outb(0x3cf, inb(0x3cf) & ~0x30);
-			outw(0x3c4, 0x1400);
-			outb(0x3ce, 0x0e);       /* disable 256 color mode */
-			outb(0x3cf, inb(0x3cf) & ~0x01);
-			outb(0xd00, 0xff);       /* enable auto-centering */
-			if (!(inb(0xd01) & 0x03)) {
-				outb(0x3d4, 0x33);
-				outb(0x3d5, inb(0x3d5) & ~0x90);
-				outb(0x3d4, 0x32);
-				outb(0x3d5, inb(0x3d5) | 0x04);
-				outw(0x3d4, 0x0250);
-				outw(0x3d4, 0x07ba);
-				outw(0x3d4, 0x0900);
-				outw(0x3d4, 0x15e7);
-				outw(0x3d4, 0x2a95);
-			}
-			outw(0x3d4, 0x34a0);
-			break;
-
-	#if 0 /* Untested - probably doesn't work */
-		case(MatroxVendor):
-		case(DiamondVendor):
-			puts("VGA Chip Vendor ID: ");
-			puthex(PCIVendor(slot));
-			puts("\n");
-			mdelay(1000);
-	#endif
-		};
-
-		outw(0x3C4, 0x0120);           /* disable video              */
-		setTextRegs(VgaTextRegs);      /* initial register setup     */
-		setTextCLUT(0);                /* load color lookup table    */
-		loadFont(ISA_mem);             /* load font                  */
-		setTextRegs(VgaTextRegs);      /* reload registers           */
-		outw(0x3C4, 0x0100);           /* re-enable video            */
-		clearVideoMemory();
-
-		if (PCIVendor(slot) == S3Vendor) {
-			outb(0x3c2, 0x63);                  /* MISC */
-		} /* endif */
-
-	#ifdef DEBUG
-		printslots();
-		mdelay(5000);
-	#endif
-
-		mdelay(1000);	/* give time for the video monitor to come up */
-        }
-	return (1);  /* 'CRT' I/O supported */
-}
-
-/*
- * Write to VGA Attribute registers.
- */
-void
-writeAttr(unsigned char index, unsigned char data, unsigned char videoOn)
-{
-	unsigned char v;
-	v = inb(0x3da);   /* reset attr. address toggle */
-	if (videoOn)
-		outb(0x3c0, (index & 0x1F) | 0x20);
-	else
-		outb(0x3c0, (index & 0x1F));
-	outb(0x3c0, data);
-}
-
-void
-setTextRegs(struct VgaRegs *svp)
-{
-	int i;
-
-	/*
-	 *  saved settings
-	 */
-	while( svp->io_port != ENDMK ) {
-		outb(svp->io_port,   svp->io_index);
-		outb(svp->io_port+1, svp->io_value);
-		svp++;
-	}
-
-	outb(0x3c2, 0x67);  /* MISC */
-	outb(0x3c6, 0xff);  /* MASK */
-
-	for ( i = 0; i < 0x10; i++)
-		writeAttr(i, AC[i], 0);  /* palette */
-	writeAttr(0x10, 0x0c, 0);    /* text mode */
-	writeAttr(0x11, 0x00, 0);    /* overscan color (border) */
-	writeAttr(0x12, 0x0f, 0);    /* plane enable */
-	writeAttr(0x13, 0x08, 0);    /* pixel panning */
-	writeAttr(0x14, 0x00, 1);    /* color select; video on  */
-}
-
-void
-setTextCLUT(int shift)
-{
-	int i;
-
-	outb(0x3C6, 0xFF);
-	i = inb(0x3C7);
-	outb(0x3C8, 0);
-	i = inb(0x3C7);
-
-	for ( i = 0; i < 256; i++) {
-		outb(0x3C9, TextCLUT[i].r << shift);
-		outb(0x3C9, TextCLUT[i].g << shift);
-		outb(0x3C9, TextCLUT[i].b << shift);
-	}
-}
-
-void
-loadFont(unsigned char *ISA_mem)
-{
-	int i, j;
-	unsigned char *font_page = (unsigned char *) &ISA_mem[0xA0000];
-
-	outb(0x3C2, 0x67);
-	/*
-	 * Load font
-	 */
-	i = inb(0x3DA);  /* Reset Attr toggle */
-
-	outb(0x3C0,0x30);
-	outb(0x3C0, 0x01);      /* graphics mode */
-
-	outw(0x3C4, 0x0001);    /* reset sequencer */
-	outw(0x3C4, 0x0204);    /* write to plane 2 */
-	outw(0x3C4, 0x0406);    /* enable plane graphics */
-	outw(0x3C4, 0x0003);    /* reset sequencer */
-	outw(0x3CE, 0x0402);    /* read plane 2 */
-	outw(0x3CE, 0x0500);    /* write mode 0, read mode 0 */
-	outw(0x3CE, 0x0605);    /* set graphics mode */
-
-	for (i = 0;  i < sizeof(font);  i += 16) {
-		for (j = 0;  j < 16;  j++) {
-			__asm__ volatile("eieio");
-			font_page[(2*i)+j] = font[i+j];
-		}
-	}
-}
-
-static void
-unlockS3(void)
-{
-        int s3_device_id;
-	outw(0x3d4, 0x3848);
-	outw(0x3d4, 0x39a5);
-	outb(0x3d4, 0x2d);
-	s3_device_id = inb(0x3d5) << 8;
-	outb(0x3d4, 0x2e);
-	s3_device_id |= inb(0x3d5);
-
-	if (s3_device_id != 0x8812) {
-		/* From the S3 manual */
-		outb(0x46E8, 0x10);  /* Put into setup mode */
-		outb(0x3C3, 0x10);
-		outb(0x102, 0x01);   /* Enable registers */
-		outb(0x46E8, 0x08);  /* Enable video */
-		outb(0x3C3, 0x08);
-		outb(0x4AE8, 0x00);
-
-#if 0
-		outb(0x42E8, 0x80);  /* Reset graphics engine? */
-#endif
-
-		outb(0x3D4, 0x38);  /* Unlock all registers */
-		outb(0x3D5, 0x48);
-		outb(0x3D4, 0x39);
-		outb(0x3D5, 0xA5);
-		outb(0x3D4, 0x40);
-		outb(0x3D5, inb(0x3D5)|0x01);
-		outb(0x3D4, 0x33);
-		outb(0x3D5, inb(0x3D5)&~0x52);
-		outb(0x3D4, 0x35);
-		outb(0x3D5, inb(0x3D5)&~0x30);
-		outb(0x3D4, 0x3A);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x53);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x31);
-		outb(0x3D5, inb(0x3D5)&~0x4B);
-		outb(0x3D4, 0x58);
-
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x54);
-		outb(0x3D5, 0x38);
-		outb(0x3D4, 0x60);
-		outb(0x3D5, 0x07);
-		outb(0x3D4, 0x61);
-		outb(0x3D5, 0x80);
-		outb(0x3D4, 0x62);
-		outb(0x3D5, 0xA1);
-		outb(0x3D4, 0x69);  /* High order bits for cursor address */
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x32);
-		outb(0x3D5, inb(0x3D5)&~0x10);
-	} else {
-                outw(0x3c4, 0x0806);            /* IBM Portable 860 */
-                outw(0x3c4, 0x1041);
-                outw(0x3c4, 0x1128);
-                outw(0x3d4, 0x4000);
-                outw(0x3d4, 0x3100);
-                outw(0x3d4, 0x3a05);
-                outw(0x3d4, 0x6688);
-                outw(0x3d4, 0x5800);            /* disable linear addressing */
-                outw(0x3d4, 0x4500);            /* disable H/W cursor */
-                outw(0x3c4, 0x5410);            /* enable auto-centering */
-                outw(0x3c4, 0x561f);
-                outw(0x3c4, 0x1b80);            /* lock DCLK selection */
-                outw(0x3d4, 0x3900);            /* lock S3 registers */
-                outw(0x3d4, 0x3800);
-	} /* endif */
-}
-
-/*
- * cursor() sets an offset (0-1999) into the 80x25 text area.
- */
-void
-cursor(int x, int y)
-{
-	int pos = (y*cols)+x;
-	outb(0x3D4, 14);
-	outb(0x3D5, pos >> 8);
-	outb(0x3D4, 15);
-	outb(0x3D5, pos);
-}
-
-void
-clearVideoMemory(void)
-{
-	int i, j;
-	for (i = 0;  i < lines;  i++) {
-		for (j = 0;  j < cols;  j++) {
-			vidmem[((i*cols)+j)*2] = 0x20;	/* fill with space character */
-			vidmem[((i*cols)+j)*2+1] = 0x07;  /* set bg & fg attributes */
-		}
-	}
-}
-
-/* ============ */
-
-
-#define NSLOTS 8
-#define NPCIREGS  5
-
-
-/*
- should use devfunc number/indirect method to be totally safe on
- all machines, this works for now on 3 slot Moto boxes
-*/
-
-struct PCI_ConfigInfo {
-  unsigned long * config_addr;
-  unsigned long regs[NPCIREGS];
-} PCI_slots [NSLOTS] = {
-
-    { (unsigned long *)0x80808000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80800800, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80801000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80802000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80804000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80810000, {0xDEADBEEF,} },   /* slot A/1 */
-    { (unsigned long *)0x80820000, {0xDEADBEEF,} },   /* slot B/2 */
-    { (unsigned long *)0x80840000, {0xDEADBEEF,} }    /* slot C/3 */
-};
-
-
-
-/*
- * The following code modifies the PCI Command register
- * to enable memory and I/O accesses.
- */
-void
-unlockVideo(int slot)
-{
-       volatile unsigned char * ppci;
-
-        ppci =  (unsigned char * )PCI_slots[slot].config_addr;
-	ppci[4] = 0x0003;         /* enable memory and I/O accesses */
-	ppci[0x10] = 0x00000;     /* turn off memory mapping */
-	ppci[0x11] = 0x00000;     /* mem_base = 0 */
-	ppci[0x12] = 0x00000;
-	ppci[0x13] = 0x00000;
-	__asm__ volatile("eieio");
-
-	outb(0x3d4, 0x11);
-	outb(0x3d5, 0x0e);   /* unlock CR0-CR7 */
-}
-
-long
-SwapBytes(long lv)   /* turn little endian into big indian long */
-{
-    long t;
-    t  = (lv&0x000000FF) << 24;
-    t |= (lv&0x0000FF00) << 8;
-    t |= (lv&0x00FF0000) >> 8;
-    t |= (lv&0xFF000000) >> 24;
-    return(t);
-}
-
-
-#define DEVID   0
-#define CMD     1
-#define CLASS   2
-#define MEMBASE 4
-
-int
-scanPCI(int start_slt)
-{
-	int slt, r;
-	struct PCI_ConfigInfo *pslot;
-	int theSlot = -1;
-	int highVgaSlot = 0;
-
-	for ( slt = start_slt + 1; slt < NSLOTS; slt++) {
-		pslot = &PCI_slots[slt];
-		for ( r = 0; r < NPCIREGS; r++) {
-			pslot->regs[r] = SwapBytes ( pslot->config_addr[r] );
-		}
-		/* card in slot ? */
-		if ( pslot->regs[DEVID] != 0xFFFFFFFF ) {
-			/* VGA ? */
-			if ( ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x03000000) ||
-			     ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x00010000)) {
-				highVgaSlot = slt;
-				/* did firmware enable it ? */
-				if ( (pslot->regs[CMD] & 0x03) ) {
-					theSlot = slt;
-					break;
-				}
-			}
-		}
-	}
-
-	return ( theSlot );
-}
-
-/* return Vendor ID of card in the slot */
-static
-int PCIVendor(int slotnum) {
- struct PCI_ConfigInfo *pslot;
-
- pslot = &PCI_slots[slotnum];
-
-return (pslot->regs[DEVID] & 0xFFFF);
-}
-
-#ifdef DEBUG
-static
-void printslots(void)
-{
-	int i;
-#if 0
-	struct PCI_ConfigInfo *pslot;
-#endif
-	for(i=0; i < NSLOTS; i++) {
-#if 0
-		pslot = &PCI_slots[i];
-		printf("Slot: %d, Addr: %x, Vendor: %08x, Class: %08x\n",
-		       i, pslot->config_addr, pslot->regs[0], pslot->regs[2]);
-#else
-		puts("PCI Slot number: "); puthex(i);
-		puts(" Vendor ID: ");
-		puthex(PCIVendor(i)); puts("\n");
-#endif
-	}
-}
-#endif /* DEBUG */
diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile
deleted file mode 100644
index 0b979c004972..000000000000
--- a/arch/ppc/boot/of1275/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile of1275 stuff
-#
-
-lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
-	 ofstdio.o read.o release.o write.o map.o call_prom.o
diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c
deleted file mode 100644
index 9479a3a2b8c7..000000000000
--- a/arch/ppc/boot/of1275/call_prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include <stdarg.h>
-
-int call_prom(const char *service, int nargs, int nret, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, nret);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
-
-int call_prom_ret(const char *service, int nargs, int nret,
-		  unsigned int *rets, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, rets);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	if (rets != (void *) 0)
-		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c
deleted file mode 100644
index 1ed3aeeff8ae..000000000000
--- a/arch/ppc/boot/of1275/claim.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-/*
- * Older OF's require that when claiming a specific range of addresses,
- * we claim the physical space in the /memory node and the virtual
- * space in the chosen mmu node, and then do a map operation to
- * map virtual to physical.
- */
-static int need_map = -1;
-static ihandle chosen_mmu;
-static phandle memory;
-
-/* returns true if s2 is a prefix of s1 */
-static int string_match(const char *s1, const char *s2)
-{
-	for (; *s2; ++s2)
-		if (*s1++ != *s2)
-			return 0;
-	return 1;
-}
-
-static int check_of_version(void)
-{
-	phandle oprom, chosen;
-	char version[64];
-
-	oprom = finddevice("/openprom");
-	if (oprom == OF_INVALID_HANDLE)
-		return 0;
-	if (getprop(oprom, "model", version, sizeof(version)) <= 0)
-		return 0;
-	version[sizeof(version)-1] = 0;
-	printf("OF version = '%s'\n", version);
-	if (!string_match(version, "Open Firmware, 1.")
-	    && !string_match(version, "FirmWorks,3."))
-		return 0;
-	chosen = finddevice("/chosen");
-	if (chosen == OF_INVALID_HANDLE) {
-		chosen = finddevice("/chosen@0");
-		if (chosen == OF_INVALID_HANDLE) {
-			printf("no chosen\n");
-			return 0;
-		}
-	}
-	if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) {
-		printf("no mmu\n");
-		return 0;
-	}
-	memory = (ihandle) call_prom("open", 1, 1, "/memory");
-	if (memory == OF_INVALID_HANDLE) {
-		memory = (ihandle) call_prom("open", 1, 1, "/memory@0");
-		if (memory == OF_INVALID_HANDLE) {
-			printf("no memory node\n");
-			return 0;
-		}
-	}
-	printf("old OF detected\n");
-	return 1;
-}
-
-void *claim(unsigned int virt, unsigned int size, unsigned int align)
-{
-	int ret;
-	unsigned int result;
-
-	if (need_map < 0)
-		need_map = check_of_version();
-	if (align || !need_map)
-		return (void *) call_prom("claim", 3, 1, virt, size, align);
-	
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory,
-			    align, size, virt);
-	if (ret != 0 || result == -1)
-		return (void *) -1;
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
-			    align, size, virt);
-	/* 0x12 == coherent + read/write */
-	ret = call_prom("call-method", 6, 1, "map", chosen_mmu,
-			0x12, size, virt, virt);
-	return virt;
-}
diff --git a/arch/ppc/boot/of1275/enter.c b/arch/ppc/boot/of1275/enter.c
deleted file mode 100644
index abe87a8fe2db..000000000000
--- a/arch/ppc/boot/of1275/enter.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-enter(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    args.service = "enter";
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/exit.c b/arch/ppc/boot/of1275/exit.c
deleted file mode 100644
index b9f89b6a8b45..000000000000
--- a/arch/ppc/boot/of1275/exit.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*of_prom_entry)(&args);
-    }
-}
diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c
deleted file mode 100644
index 0dcb1201b772..000000000000
--- a/arch/ppc/boot/of1275/finddevice.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-phandle finddevice(const char *name)
-{
-	return (phandle) call_prom("finddevice", 1, 1, name);
-}
diff --git a/arch/ppc/boot/of1275/getprop.c b/arch/ppc/boot/of1275/getprop.c
deleted file mode 100644
index 0cf75f035e4e..000000000000
--- a/arch/ppc/boot/of1275/getprop.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-getprop(phandle node, const char *name, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	phandle node;
-	const char *name;
-	void *buf;
-	int buflen;
-	int size;
-    } args;
-
-    args.service = "getprop";
-    args.nargs = 4;
-    args.nret = 1;
-    args.node = node;
-    args.name = name;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.size = -1;
-    (*of_prom_entry)(&args);
-    return args.size;
-}
diff --git a/arch/ppc/boot/of1275/map.c b/arch/ppc/boot/of1275/map.c
deleted file mode 100644
index 443256c6f6d6..000000000000
--- a/arch/ppc/boot/of1275/map.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern ihandle of_prom_mmu;
-
-int
-map(unsigned int phys, unsigned int virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	char *method;
-	ihandle mmu_ihandle;
-	int misc;
-	unsigned int size;
-	unsigned int virt;
-	unsigned int phys;
-	int ret0;
-    } args;
-
-    if (of_prom_mmu == 0) {
-    	printf("map() called, no MMU found\n");
-    	return -1;
-    }
-    args.service = "call-method";
-    args.nargs = 6;
-    args.nret = 1;
-    args.method = "map";
-    args.mmu_ihandle = of_prom_mmu;
-    args.misc = 0;
-    args.phys = phys;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-
-    return (int)args.ret0;
-}
diff --git a/arch/ppc/boot/of1275/ofinit.c b/arch/ppc/boot/of1275/ofinit.c
deleted file mode 100644
index 0ee8af7639e9..000000000000
--- a/arch/ppc/boot/of1275/ofinit.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-prom_entry of_prom_entry;
-ihandle of_prom_mmu;
-
-void
-ofinit(prom_entry prom_ptr)
-{
-    phandle chosen;
-
-    of_prom_entry = prom_ptr;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	return;
-    if (getprop(chosen, "mmu", &of_prom_mmu, sizeof(ihandle)) != 4)
-	return;
-}
diff --git a/arch/ppc/boot/of1275/ofstdio.c b/arch/ppc/boot/of1275/ofstdio.c
deleted file mode 100644
index 10abbe32b31f..000000000000
--- a/arch/ppc/boot/of1275/ofstdio.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr)
-{
-    ihandle in, out;
-    phandle chosen;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	goto err;
-    if (getprop(chosen, "stdout", &out, sizeof(out)) != 4)
-	goto err;
-    if (getprop(chosen, "stdin", &in, sizeof(in)) != 4)
-	goto err;
-
-    *stdin  = in;
-    *stdout = out;
-    *stderr = out;
-    return 0;
-err:
-    return -1;
-}
diff --git a/arch/ppc/boot/of1275/read.c b/arch/ppc/boot/of1275/read.c
deleted file mode 100644
index 122813649fce..000000000000
--- a/arch/ppc/boot/of1275/read.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-read(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "read";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/of1275/release.c b/arch/ppc/boot/of1275/release.c
deleted file mode 100644
index 28032d37145d..000000000000
--- a/arch/ppc/boot/of1275/release.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-release(void *virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	void *virt;
-	unsigned int size;
-    } args;
-
-    args.service = "release";
-    args.nargs = 2;
-    args.nret = 0;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/write.c b/arch/ppc/boot/of1275/write.c
deleted file mode 100644
index 7361b9b2fca5..000000000000
--- a/arch/ppc/boot/of1275/write.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-write(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "write";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
deleted file mode 100644
index 5b877792d14f..000000000000
--- a/arch/ppc/boot/simple/Makefile
+++ /dev/null
@@ -1,277 +0,0 @@
-# This is far from simple, but I couldn't think of a good name.  This is
-# for making the 'zImage' or 'zImage.initrd' on a number of targets.
-#
-# Author: Tom Rini <trini@mvista.com>
-#
-# Notes:
-# (1) For machines that do not want to use the ELF image directly (including
-# stripping just the ELF header off), they must set the variables
-# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target
-# that produces the desired image and they must set end-$(CONFIG_MACHINE)
-# to what will be suffixed to the image filename.
-# (2) Regardless of (1), to have the resulting image be something other
-# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for
-# the zImage, znetboot, and znetbootrd targets.
-# (3) For machine targets which use the mktree program, you can optionally
-# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be
-# loaded at.  The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link
-# address.
-# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
-# get_mem_size(), which is memory controller dependent.  Add in the correct
-# XXX_memory.o file for this to work, as well as editing the
-# misc-$(CONFIG_MACHINE) variable.
-
-boot				:= arch/ppc/boot
-common				:= $(boot)/common
-utils				:= $(boot)/utils
-bootlib				:= $(boot)/lib
-images				:= $(boot)/images
-of1275				:= $(boot)/of1275
-tftpboot			:= /tftpboot
-
-# Normally, we use the 'misc.c' file for decompress_kernel and
-# whatnot.  Sometimes we need to override this however.
-misc-y	:= misc.o
-
-# Normally, we have our images end in .elf, but something we want to
-# change this.
-end-y := elf
-
-# Additionally, we normally don't need to mess with the L2 / L3 caches
-# if present on 'classic' PPC.
-cacheflag-y	:= -DCLEAR_CACHES=""
-# This file will flush / disable the L2, and L3 if present.
-clear_L2_L3	:= $(srctree)/$(boot)/simple/clear.S
-
-#
-# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
-# for definition of what platform each config option refer to.
-#----------------------------------------------------------------------------
-      zimage-$(CONFIG_CPCI690)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_CPCI690)		:= zImage.initrd-STRIPELF
-     extra.o-$(CONFIG_CPCI690)		:= misc-cpci690.o
-         end-$(CONFIG_CPCI690)		:= cpci690
-   cacheflag-$(CONFIG_CPCI690)		:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_IBM_OPENBIOS)	:= zImage-TREE
-zimageinitrd-$(CONFIG_IBM_OPENBIOS)	:= zImage.initrd-TREE
-         end-$(CONFIG_IBM_OPENBIOS)	:= treeboot
-        misc-$(CONFIG_IBM_OPENBIOS)	:= misc-embedded.o
-
-         end-$(CONFIG_EMBEDDEDBOOT)	:= embedded
-        misc-$(CONFIG_EMBEDDEDBOOT)	:= misc-embedded.o
-
-      zimage-$(CONFIG_BAMBOO)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
-         end-$(CONFIG_BAMBOO)		:= bamboo
-  entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
-     extra.o-$(CONFIG_BAMBOO)		:= pibs.o
-
-      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE
-         end-$(CONFIG_BUBINGA)		:= bubinga
-  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000
-     extra.o-$(CONFIG_BUBINGA)		:= openbios.o
-
-      zimage-$(CONFIG_EBONY)		:= zImage-TREE
-zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
-         end-$(CONFIG_EBONY)		:= ebony
-  entrypoint-$(CONFIG_EBONY)		:= 0x01000000
-     extra.o-$(CONFIG_EBONY)		:= openbios.o
-
-      zimage-$(CONFIG_LUAN)		:= zImage-TREE
-zimageinitrd-$(CONFIG_LUAN)		:= zImage.initrd-TREE
-         end-$(CONFIG_LUAN)		:= luan
-  entrypoint-$(CONFIG_LUAN)		:= 0x01000000
-     extra.o-$(CONFIG_LUAN)		:= pibs.o
-
-      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
-         end-$(CONFIG_YUCCA)		:= yucca
-  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
-     extra.o-$(CONFIG_YUCCA)		:= pibs.o
-
-      zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
-         end-$(CONFIG_OCOTEA)		:= ocotea
-  entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000
-     extra.o-$(CONFIG_OCOTEA)		:= pibs.o
-
-      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SYCAMORE)		:= sycamore
-  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000
-     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o
-
-      zimage-$(CONFIG_WALNUT)		:= zImage-TREE
-zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE
-         end-$(CONFIG_WALNUT)		:= walnut
-  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000
-     extra.o-$(CONFIG_WALNUT)		:= openbios.o
-
-     extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o
-         end-$(CONFIG_EV64260)		:= ev64260
-   cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_CHESTNUT)		:= misc-chestnut.o
-         end-$(CONFIG_CHESTNUT)		:= chestnut
-
-     extra.o-$(CONFIG_KATANA)		:= misc-katana.o
-         end-$(CONFIG_KATANA)		:= katana
-   cacheflag-$(CONFIG_KATANA)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_RADSTONE_PPC7D)	:= misc-radstone_ppc7d.o
-         end-$(CONFIG_RADSTONE_PPC7D)	:= radstone_ppc7d
-   cacheflag-$(CONFIG_RADSTONE_PPC7D)	:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_EV64360)          := misc-ev64360.o
-         end-$(CONFIG_EV64360)          := ev64360
-   cacheflag-$(CONFIG_EV64360)          := -include $(clear_L2_L3)
-
-# kconfig 'feature', only one of these will ever be 'y' at a time.
-# The rest will be unset.
-motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
-$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
-motorola := $(strip $(motorola))
-
-      zimage-$(motorola)		:= zImage-PPLUS
-zimageinitrd-$(motorola)		:= zImage.initrd-PPLUS
-         end-$(motorola)		:= pplus
-
-# Overrides previous assingment
-     extra.o-$(CONFIG_PPLUS)		:= prepmap.o
-     extra.o-$(CONFIG_LOPEC)		:= mpc10x_memory.o
-
-# Really only valid if CONFIG_6xx=y
-      zimage-$(CONFIG_PPC_PREP)		:= zImage-PPLUS
-zimageinitrd-$(CONFIG_PPC_PREP)		:= zImage.initrd-PPLUS
-ifeq ($(CONFIG_6xx),y)
-     extra.o-$(CONFIG_PPC_PREP)		:= prepmap.o
-        misc-$(CONFIG_PPC_PREP)		+= misc-prep.o mpc10x_memory.o
-endif
-         end-$(CONFIG_PPC_PREP)		:= prep
-
-         end-$(CONFIG_SANDPOINT)	:= sandpoint
-   cacheflag-$(CONFIG_SANDPOINT)	:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_SPRUCE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SPRUCE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SPRUCE)		:= spruce
-  entrypoint-$(CONFIG_SPRUCE)		:= 0x00800000
-        misc-$(CONFIG_SPRUCE)		+= misc-spruce.o
-
-      zimage-$(CONFIG_LITE5200)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_LITE5200)		:= zImage.initrd-STRIPELF
-         end-$(CONFIG_LITE5200)		:= lite5200
-   cacheflag-$(CONFIG_LITE5200)		:= -include $(clear_L2_L3)
-
-
-# SMP images should have a '.smp' suffix.
-         end-$(CONFIG_SMP)             := $(end-y).smp
-
-# This is a treeboot that needs init functions until the
-# boot rom is sorted out (i.e. this is short lived)
-EXTRA_AFLAGS := $(extra-aflags-y)
-# head.o needs to get the cacheflags defined.
-AFLAGS_head.o				+= $(cacheflag-y)
-
-# Linker args.  This specifies where the image will be run at.
-LD_ARGS					:= -T $(srctree)/$(boot)/ld.script \
-				   -Ttext $(CONFIG_BOOT_LOAD) -Bstatic
-OBJCOPY_ARGS			:= -O elf32-powerpc
-
-# head.o and relocate.o must be at the start.
-boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_REDWOOD_5)	+= embed_config.o
-boot-$(CONFIG_REDWOOD_6)	+= embed_config.o
-boot-$(CONFIG_8xx)		+= embed_config.o
-boot-$(CONFIG_8260)		+= embed_config.o
-boot-$(CONFIG_EP405)		+= embed_config.o
-boot-$(CONFIG_XILINX_ML300)	+= embed_config.o
-boot-$(CONFIG_XILINX_ML403)	+= embed_config.o
-boot-$(CONFIG_BSEIP)		+= iic.o
-boot-$(CONFIG_MBX)		+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_MV64X60)		+= misc-mv64x60.o
-boot-$(CONFIG_RPXCLASSIC)	+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_RPXLITE)		+= iic.o
-# Different boards need different serial implementations.
-ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y)
-boot-$(CONFIG_8xx)		+= m8xx_tty.o
-boot-$(CONFIG_8260)		+= m8260_tty.o
-endif
-boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE)	+= mpc52xx_tty.o
-boot-$(CONFIG_SERIAL_MPSC_CONSOLE)	+= mv64x60_tty.o
-boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE)	+= uartlite_tty.o
-
-LIBS				:= $(common)/lib.a $(bootlib)/lib.a
-ifeq ($(CONFIG_PPC_PREP),y)
-LIBS 				+= $(of1275)/lib.a
-endif
-
-OBJS				:= $(addprefix $(obj)/,$(boot-y))
-
-# Tools
-MKBUGBOOT			:= $(utils)/mkbugboot
-MKPREP				:= $(utils)/mkprep
-MKTREE				:= $(utils)/mktree
-
-targets := dummy.o
-
-$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr -R .ramdisk
-
-$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.ramdisk=$(images)/ramdisk.image.gz \
-		--set-section-flags=.ramdisk=contents,alloc,load,readonly,data \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr
-
-# Sort-of dummy rules, that let us format the image we want.
-zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
-	cp -f $(obj)/zvmlinux $(images)/zImage.elf
-	rm -f $(obj)/zvmlinux
-
-zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd
-	cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf
-	rm -f $(obj)/zvmlinux.initrd
-
-znetboot: zImage
-	cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y)
-
-znetboot.initrd: zImage.initrd
-	cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y)
-
-$(images)/zImage-STRIPELF: $(obj)/zvmlinux
-	dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
-
-$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
-	dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \
-		skip=64 bs=1k
-
-$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
-
-$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
-		$(entrypoint-y)
-
-$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
-
-$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
diff --git a/arch/ppc/boot/simple/chrpmap.c b/arch/ppc/boot/simple/chrpmap.c
deleted file mode 100644
index 14d9e05d98bb..000000000000
--- a/arch/ppc/boot/simple/chrpmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0xFE000000);
-}
diff --git a/arch/ppc/boot/simple/clear.S b/arch/ppc/boot/simple/clear.S
deleted file mode 100644
index 95c5647a0f51..000000000000
--- a/arch/ppc/boot/simple/clear.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Code to call _setup_L2CR to flus, invalidate and disable the L2,
- * and if present, do the same to the L3.
- */
-
-#define CLEAR_CACHES						\
-	bl	_setup_L2CR;					\
-								\
-	/* If 745x, turn off L3CR as well */			\
-	mfspr	r8,SPRN_PVR;					\
-	srwi	r8,r8,16;					\
-								\
-	cmpli	cr0,r8,0x8000;			/* 7450 */	\
-	cmpli	cr1,r8,0x8001;			/* 7455 */	\
-	cmpli	cr2,r8,0x8002;			/* 7457 */	\
-	/* Now test if any are true. */				\
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq;			\
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq;			\
-	beql	_setup_L3CR
diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c
deleted file mode 100644
index d75420a45a59..000000000000
--- a/arch/ppc/boot/simple/cpc700_memory.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Find memory based upon settings in the CPC700 bridge
- *
- * Author: Dan Cox
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include "cpc700.h"
-
-unsigned long
-cpc700_get_mem_size(void)
-{
-	int i;
-	unsigned long len, amt;
-
-	/* Start at MB1EA, since MB0EA will most likely be the ending address
-	   for ROM space. */
-	for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) {
-		amt = cpc700_read_memreg(i);
-		if (amt == 0)
-			break;
-		len = amt;
-	}
-
-	return len;
-}
-
-
diff --git a/arch/ppc/boot/simple/dummy.c b/arch/ppc/boot/simple/dummy.c
deleted file mode 100644
index 31dbf45bf99c..000000000000
--- a/arch/ppc/boot/simple/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
-	return 0;
-}
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
deleted file mode 100644
index 3b46792d7b8b..000000000000
--- a/arch/ppc/boot/simple/embed_config.c
+++ /dev/null
@@ -1,938 +0,0 @@
-/* Board specific functions for those embedded 8xx boards that do
- * not have boot monitor support for board information.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/reg.h>
-#ifdef CONFIG_8xx
-#include <asm/mpc8xx.h>
-#endif
-#ifdef CONFIG_8260
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#endif
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-#ifdef CONFIG_XILINX_VIRTEX
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-extern unsigned long timebase_period_ns;
-
-/* For those boards that don't provide one.
-*/
-#if !defined(CONFIG_MBX)
-static	bd_t	bdinfo;
-#endif
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-extern void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-#if defined(CONFIG_MBX)
-
-/* The MBX hands us a pretty much ready to go board descriptor.  This
- * is where the idea started in the first place.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*mp;
-	u_char	eebuf[128];
-	int i = 8;
-	bd_t    *bd;
-
-	bd = *bdp;
-
-	/* Read the first 128 bytes of the EEPROM.  There is more,
-	 * but this is all we need.
-	 */
-	iic_read(0xa4, eebuf, 0, 128);
-
-	/* All we are looking for is the Ethernet MAC address.  The
-	 * first 8 bytes are 'MOTOROLA', so check for part of that.
-	 * Next, the VPD describes a MAC 'packet' as being of type 08
-	 * and size 06.  So we look for that and the MAC must follow.
-	 * If there are more than one, we still only care about the first.
-	 * If it's there, assume we have a valid MAC address.  If not,
-	 * grab our default one.
-	 */
-	if ((*(uint *)eebuf) == 0x4d4f544f) {
-		while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06))
-			 i += eebuf[i + 1] + 2;  /* skip this packet */
-
-		if (i == 127)	/* Couldn't find. */
-			mp = (u_char *)def_enet_addr;
-		else
-			mp = &eebuf[i + 2];
-	}
-	else
-		mp = (u_char *)def_enet_addr;
-
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *mp++;
-
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-
-	/* Stuff a baud rate here as well.
-	*/
-	bd->bi_baudrate = 9600;
-}
-#endif /* CONFIG_MBX */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || \
-	defined(CONFIG_RPX8260) || defined(CONFIG_EP405)
-/* Helper functions for Embedded Planet boards.
-*/
-/* Because I didn't find anything that would do this.......
-*/
-u_char
-aschex_to_byte(u_char *cp)
-{
-	u_char	byte, c;
-
-	c = *cp++;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte = c * 16;
-
-	c = *cp;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte += c;
-
-	return(byte);
-}
-
-static void
-rpx_eth(bd_t *bd, u_char *cp)
-{
-	int	i;
-
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = aschex_to_byte(cp);
-		cp += 2;
-	}
-}
-
-#ifdef CONFIG_RPX8260
-static uint
-rpx_baseten(u_char *cp)
-{
-	uint	retval;
-
-	retval = 0;
-
-	while (*cp != '\n') {
-		retval *= 10;
-		retval += (*cp) - '0';
-		cp++;
-	}
-	return(retval);
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-static void
-rpx_brate(bd_t *bd, u_char *cp)
-{
-	uint	rate;
-
-	rate = 0;
-
-	while (*cp != '\n') {
-		rate *= 10;
-		rate += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_baudrate = rate * 100;
-}
-
-static void
-rpx_cpuspeed(bd_t *bd, u_char *cp)
-{
-	uint	num, den;
-
-	num = den = 0;
-
-	while (*cp != '\n') {
-		num *= 10;
-		num += (*cp) - '0';
-		cp++;
-		if (*cp == '/') {
-			cp++;
-			den = (*cp) - '0';
-			break;
-		}
-	}
-
-	/* I don't know why the RPX just can't state the actual
-	 * CPU speed.....
-	 */
-	if (den) {
-		num /= den;
-		num *= den;
-	}
-	bd->bi_intfreq = bd->bi_busfreq = num * 1000000;
-
-	/* The 8xx can only run a maximum 50 MHz bus speed (until
-	 * Motorola changes this :-).  Greater than 50 MHz parts
-	 * run internal/2 for bus speed.
-	 */
-	if (num > 50)
-		bd->bi_busfreq /= 2;
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_EP405)
-static void
-rpx_memsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_memsize = size * 1024 * 1024;
-}
-#endif /* LITE || CLASSIC || EP405 */
-#if defined(CONFIG_EP405)
-static void
-rpx_nvramsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_nvramsize = size * 1024;
-}
-#endif /* CONFIG_EP405 */
-
-#endif	/* Embedded Planet boards */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-
-/* Read the EEPROM on the RPX-Lite board.
-*/
-void
-embed_config(bd_t **bdp)
-{
-	u_char	eebuf[256], *cp;
-	bd_t	*bd;
-
-	/* Read the first 256 bytes of the EEPROM.  I think this
-	 * is really all there is, and I hope if it gets bigger the
-	 * info we want is still up front.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-
-#if 1
-	iic_read(0xa8, eebuf, 0, 128);
-	iic_read(0xa8, &eebuf[128], 128, 128);
-
-	/* We look for two things, the Ethernet address and the
-	 * serial baud rate.  The records are separated by
-	 * newlines.
-	 */
-	cp = eebuf;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				rpx_brate(bd, cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				rpx_memsize(bd, cp);
-			}
-		}
-		if (*cp == 'H') {
-			cp++;
-			if (*cp == 'Z') {
-				cp += 2;
-				rpx_cpuspeed(bd, cp);
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-#else
-	/* For boards without initialized EEPROM.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-	bd->bi_baudrate = 9600;
-#endif
-}
-#endif /* RPXLITE || RPXCLASSIC */
-
-#ifdef CONFIG_BSEIP
-/* Build a board information structure for the BSE ip-Engine.
- * There is more to come since we will add some environment
- * variables and a function to read them.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Baud rate and processor speed will eventually come
-	 * from the environment variables.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Get the Ethernet station address from the Flash ROM.
-	*/
-	cp = (u_char *)0xfe003ffa;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	/* The rest of this should come from the environment as well.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (16 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-}
-#endif /* BSEIP */
-
-#ifdef CONFIG_FADS
-/* Build a board information structure for the FADS.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Just fill in some known values.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Use default enet.
-	*/
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 40000000;
-	bd->bi_busfreq = 40000000;
-}
-#endif /* FADS */
-
-#ifdef CONFIG_8260
-/* Compute 8260 clock values if the rom doesn't provide them.
- */
-static unsigned char bus2core_8260[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  4, 15,  2,  3, 11,  8, 10, 16, 12,  7,  2,
-};
-
-static void
-clk_8260(bd_t *bd)
-{
-	uint	scmr, vco_out, clkin;
-	uint	plldf, pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	plldf = (scmr >> 12) & 1;
-	pllmf = scmr & 0xfff;
-	corecnf = (scmr >> 24) &0x1f;
-
-	/* This is arithmetic from the 8260 manual.
-	*/
-	vco_out = clkin / (plldf + 1);
-	vco_out *= 2 * (pllmf + 1);
-	bd->bi_vco = vco_out;		/* Save for later */
-
-	bd->bi_cpmfreq = vco_out / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8260[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = 1;	/* DIV 16 BRG */
-	bd->bi_brgfreq = vco_out / 16;
-}
-
-static unsigned char bus2core_8280[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  2, 15,  2,  3,  2,  2,  2, 16,  2,  2,  2,
-};
-
-static void
-clk_8280(bd_t *bd)
-{
-	uint	scmr, main_clk, clkin;
-	uint	pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	pllmf = scmr & 0xf;
-	corecnf = (scmr >> 24) & 0x1f;
-
-	/* This is arithmetic from the 8280 manual.
-	*/
-	main_clk = clkin * (pllmf + 1);
-
-	bd->bi_cpmfreq = main_clk / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8280[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = (ip->im_clkrst.car_sccr & 0x3) | 0x1;
-	bd->bi_brgfreq = main_clk / 16;
-}
-#endif
-
-#ifdef CONFIG_SBC82xx
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-	unsigned long pvr;
-
-	bd = *bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 256 * 1024 * 1024;	/* just a guess */
-
-	cp = (void*)SBC82xx_MACADDR_NVRAM_SCC1;
-	memcpy(bd->bi_enetaddr, cp, 6);
-
-	/* can busfreq be calculated? */
-	pvr = mfspr(SPRN_PVR);
-	if ((pvr & 0xffff0000) == 0x80820000) {
-		bd->bi_busfreq = 100000000;
-		clk_8280(bd);
-	} else {
-		bd->bi_busfreq = 66000000;
-		clk_8260(bd);
-	}
-
-}
-#endif /* SBC82xx */
-
-#if defined(CONFIG_EST8260) || defined(CONFIG_TQM8260)
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = *bdp;
-#if 0
-	/* This is actually provided by my boot rom.  I have it
-	 * here for those people that may load the kernel with
-	 * a JTAG/COP tool and not the rom monitor.
-	 */
-	bd->bi_baudrate = 115200;
-	bd->bi_intfreq = 200000000;
-	bd->bi_busfreq = 66666666;
-	bd->bi_cpmfreq = 66666666;
-	bd->bi_brgfreq = 33333333;
-	bd->bi_memsize = 16 * 1024 * 1024;
-#else
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-	bd->bi_cpmfreq *= 1000000;
-	bd->bi_brgfreq *= 1000000;
-#endif
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* EST8260 */
-
-#ifdef CONFIG_SBS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 64 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 133000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* SBS8260 */
-
-#ifdef CONFIG_RPX8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp, *keyvals;
-	int	i;
-	bd_t	*bd;
-
-	keyvals = (u_char *)*bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* This is almost identical to the RPX-Lite/Classic functions
-	 * on the 8xx boards.  It would be nice to have a key lookup
-	 * function in a string, but the format of all of the fields
-	 * is slightly different.
-	 */
-	cp = keyvals;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				bd->bi_baudrate = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				bd->bi_memsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-		if (*cp == 'X') {
-			cp++;
-			if (*cp == 'T') {
-				cp += 2;
-				bd->bi_busfreq = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'N') {
-			cp++;
-			if (*cp == 'V') {
-				cp += 2;
-				bd->bi_nvsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-
-	/* The memory size includes both the 60x and local bus DRAM.
-	 * I don't want to use the local bus DRAM for real memory,
-	 * so subtract it out.  It would be nice if they were separate
-	 * keys.
-	 */
-	bd->bi_memsize -= 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.
-	 */
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-}
-#endif /* RPX6 for testing */
-
-#ifdef CONFIG_ADS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 16 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* ADS8260 */
-
-#ifdef CONFIG_WILLOW
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* Willow has Open Firmware....I should learn how to get this
-	 * information from it.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* WILLOW */
-
-#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403)
-void
-embed_config(bd_t ** bdp)
-{
-	static const unsigned long line_size = 32;
-	static const unsigned long congruence_classes = 256;
-	unsigned long addr;
-	unsigned long dccr;
-	uint8_t* cp;
-	bd_t *bd;
-	int i;
-
-	/*
-	 * Invalidate the data cache if the data cache is turned off.
-	 * - The 405 core does not invalidate the data cache on power-up
-	 *   or reset but does turn off the data cache. We cannot assume
-	 *   that the cache contents are valid.
-	 * - If the data cache is turned on this must have been done by
-	 *   a bootloader and we assume that the cache contents are
-	 *   valid.
-	 */
-	__asm__("mfdccr %0": "=r" (dccr));
-	if (dccr == 0) {
-		for (addr = 0;
-		     addr < (congruence_classes * line_size);
-		     addr += line_size) {
-			__asm__("dccci 0,%0": :"b"(addr));
-		}
-	}
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_memsize = XPAR_DDR_0_SIZE;
-	bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ;
-	bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ;
-	bd->bi_pci_busfreq = XPAR_PCI_0_CLOCK_FREQ_HZ;
-
-	/* Copy the default ethernet address */
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *cp++;
-
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-	/* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
-}
-#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */
-
-#ifdef CONFIG_IBM_OPENBIOS
-/* This could possibly work for all treeboot roms.
-*/
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd, *treeboot_bd;
-	bd_t *(*get_board_info)(void) =
-	    (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-#if !defined(CONFIG_STB03xxx)
-
-	/* shut down the Ethernet controller that the boot rom
-	 * sometimes leaves running.
-	 */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((volatile u32*)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-#endif
-
-	bd = &bdinfo;
-	*bdp = bd;
-	if ((treeboot_bd = get_board_info()) != NULL) {
-		memcpy(bd, treeboot_bd, sizeof(bd_t));
-	}
-	else {
-		/* Hmmm...better try to stuff some defaults.
-		*/
-		bd->bi_memsize = 16 * 1024 * 1024;
-		cp = (u_char *)def_enet_addr;
-		for (i=0; i<6; i++) {
-			/* I should probably put different ones here,
-			 * hopefully only one is used.
-			 */
-			bd->BD_EMAC_ADDR(0,i) = *cp;
-
-#ifdef CONFIG_PCI
-			bd->bi_pci_enetaddr[i] = *cp++;
-#endif
-		}
-		bd->bi_tbfreq = 200 * 1000 * 1000;
-		bd->bi_intfreq = 200000000;
-		bd->bi_busfreq = 100000000;
-#ifdef CONFIG_PCI
-		bd->bi_pci_busfreq = 66666666;
-#endif
-	}
-	/* Yeah, this look weird, but on Redwood 4 they are
-	 * different object in the structure.  Sincr Redwwood 5
-	 * and Redwood 6 use OpenBIOS, it requires a special value.
-	 */
-#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6)
-	bd->bi_tbfreq = 27 * 1000 * 1000;
-#endif
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-}
-#endif /* CONFIG_IBM_OPENBIOS */
-
-#ifdef CONFIG_EP405
-#include <linux/serial_reg.h>
-
-void
-embed_config(bd_t **bdp)
-{
-	u32 chcr0;
-	u_char *cp;
-	bd_t	*bd;
-
-	/* Different versions of the PlanetCore firmware vary in how
-	   they set up the serial port - in particular whether they
-	   use the internal or external serial clock for UART0.  Make
-	   sure the UART is in a known state. */
-	/* FIXME: We should use the board's 11.0592MHz external serial
-	   clock - it will be more accurate for serial rates.  For
-	   now, however the baud rates in ep405.h are for the internal
-	   clock. */
-	chcr0 = mfdcr(DCRN_CHCR0);
-	if ( (chcr0 & 0x1fff) != 0x103e ) {
-		mtdcr(DCRN_CHCR0, (chcr0 & 0xffffe000) | 0x103e);
-		/* The following tricks serial_init() into resetting the baud rate */
-		writeb(0, UART0_IO_BASE + UART_LCR);
-	}
-
-	/* We haven't seen actual problems with the EP405 leaving the
-	 * EMAC running (as we have on Walnut).  But the registers
-	 * suggest it may not be left completely quiescent.  Reset it
-	 * just to be sure. */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((unsigned *)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-
-	bd = &bdinfo;
-	*bdp = bd;
-#if 1
-	        cp = (u_char *)0xF0000EE0;
-	        for (;;) {
-	                if (*cp == 'E') {
-	                        cp++;
-	                        if (*cp == 'A') {
-                                  cp += 2;
-                                  rpx_eth(bd, cp);
-	                        }
-		         }
-
-	         	if (*cp == 'D') {
-	                        	cp++;
-	                        	if (*cp == '1') {
-		                                cp += 2;
-		                                rpx_memsize(bd, cp);
-	        	                }
-                	}
-
-			if (*cp == 'N') {
-				cp++;
-				if (*cp == 'V') {
-					cp += 2;
-					rpx_nvramsize(bd, cp);
-				}
-			}
-			while ((*cp != '\n') && (*cp != 0xff))
-			      cp++;
-
-	                cp++;
-	                if ((*cp == 0) || (*cp == 0xff))
-	                   break;
-	       }
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#else
-
-	bd->bi_memsize   = 64000000;
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#endif
-}
-#endif
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
deleted file mode 100644
index 1b4d7b1d4ec1..000000000000
--- a/arch/ppc/boot/simple/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Initial board bringup code for many different boards.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/reg.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- *      Begin at some arbitrary location in RAM or Flash
- *	  Initialize core registers
- *	  Configure memory controller (Not executing from RAM)
- *	Move the boot code to the link address (8M)
- *	  Setup C stack
- *	  Initialize UART
- *      Decompress the kernel to 0x0
- *      Jump to the kernel entry
- *
- */
-
-	.globl	start
-start:
-	bl	start_
-#ifdef CONFIG_IBM_OPENBIOS
-	/* The IBM "Tree" bootrom knows that the address of the bootrom
-	 * read only structure is 4 bytes after _start.
-	 */
-	.long	0x62726f6d		# structure ID - "brom"
-	.long	0x5f726f00		#              - "_ro\0"
-	.long	1			# structure version
-	.long	bootrom_cmdline		# address of *bootrom_cmdline
-#endif
-
-start_:
-#ifdef CONFIG_FORCE
-	/* We have some really bad firmware.  We must disable the L1
-	 * icache/dcache now or the board won't boot.
-	 */
-	li	r4,0x0000
-	isync
-	mtspr	SPRN_HID0,r4
-	sync
-	isync
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r29,r3	/* On the MBX860, r3 is the board info pointer.
-			 * On the RPXSUPER, r3 points to the NVRAM
-			 * configuration keys.
-			 * On PReP, r3 is the pointer to the residual data.
-			 */
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX_4_FX)
-	/* PPC errata 213: only for Virtex-4 FX */
-	mfccr0  0
-	oris    0,0,0x50000000@h
-	mtccr0  0
-#endif
-
-	mflr	r3	/* Save our actual starting address. */
-
-	/* The following functions we call must not modify r3 or r4.....
-	*/
-#ifdef CONFIG_6xx
-	/* On PReP we must look at the OpenFirmware pointer and sanity
-	 * test it.  On other platforms, we disable the MMU right now
-	 * and other bits.
-	 */
-#ifdef CONFIG_PPC_PREP
-/*
- * Save the OF pointer to r25, but only if the entry point is in a sane
- * location; if not we store 0.  If there is no entry point, or it is
- * invalid, we establish the default MSR value immediately.  Otherwise,
- * we defer doing that, to allow OF functions to be called, until we
- * begin uncompressing the kernel.
- */
-	lis	r8,0x0fff		/* r8 = 0x0fffffff */
-	ori	r8,r8,0xffff
-
-	subc	r8,r8,r5		/* r8 = (r5 <= r8) ? ~0 : 0 */
-	subfe	r8,r8,r8
-	nand	r8,r8,r8
-
-	and.	r5,r5,r8		/* r5 will be cleared if (r5 > r8) */
-	bne+	haveOF
-
-	li	r8,MSR_IP|MSR_FP	/* Not OF: set MSR immediately */
-  	mtmsr	r8
-	isync
-haveOF:
-	mr	r25,r5
-#else
-	bl	disable_6xx_mmu
-#endif
-	bl	disable_6xx_l1cache
-
-	CLEAR_CACHES
-#endif
-
-#ifdef CONFIG_8xx
-	mfmsr	r8		/* Turn off interrupts */
-	li	r9,0
-	ori	r9,r9,MSR_EE
-	andc	r8,r8,r9
-	mtmsr	r8
-
-	/* We do this because some boot roms don't initialize the
-	 * processor correctly. Don't do this if you want to debug
-	 * using a BDM device.
-	 */
-	li	r4,0		/* Zero DER to prevent FRZ */
-	mtspr	SPRN_DER,r4
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r4,r29	/* put the board info pointer where the relocate
-			 * routine will find it
-			 */
-#endif
-
-	/* Get the load address.
-	*/
-	subi	r3, r3, 4	/* Get the actual IP, not NIP */
-	b	relocate
-
diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c
deleted file mode 100644
index 5e91489426b4..000000000000
--- a/arch/ppc/boot/simple/iic.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* Minimal support functions to read configuration from IIC EEPROMS
- * on MPC8xx boards.  Originally written for RPGC RPX-Lite.
- * Dan Malek (dmalek@jlc.net).
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-static	int	iic_init_done;
-
-static void
-iic_init(void)
-{
-	volatile iic_t *iip;
-	volatile i2c8xx_t *i2c;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	uint	dpaddr;
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	/* Reset the CPM.  This is necessary on the 860 processors
-	 * that may have started the SCC1 ethernet without relocating
-	 * the IIC.
-	 * This also stops the Ethernet in case we were loaded by a
-	 * BOOTP rom monitor.
-	 */
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG));
-
-	/* Remove any microcode patches.  We will install our own
-	 * later.
-	 */
-	cp->cp_cpmcr1 = 0;
-	cp->cp_cpmcr2 = 0;
-	cp->cp_cpmcr3 = 0;
-	cp->cp_cpmcr4 = 0;
-	cp->cp_rccr = 0;
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Initialize the parameter ram.
-	*/
-
-	/* Allocate space for a two transmit and one receive buffer
-	 * descriptor in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0840;
-
-	/* Set up the IIC parameters in the parameter ram.
-	*/
-	iip->iic_tbase = dpaddr;
-	iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t));
-
-	iip->iic_tfcr = SMC_EB;
-	iip->iic_rfcr = SMC_EB;
-
-	/* This should really be done by the reader/writer.
-	*/
-	iip->iic_mrblr = 128;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Select an arbitrary address.  Just make sure it is unique.
-	*/
-	i2c->i2c_i2add = 0x34;
-
-	/* Make clock run maximum slow.
-	*/
-	i2c->i2c_i2brg = 7;
-
-	/* Disable interrupts.
-	*/
-	i2c->i2c_i2cmr = 0;
-	i2c->i2c_i2cer = 0xff;
-
-	/* Enable SDMA.
-	*/
-	immap->im_siu_conf.sc_sdcr = 1;
-
-	iic_init_done = 1;
-}
-
-/* Read from IIC.
- * Caller provides device address, memory buffer, and byte count.
- */
-static	u_char	iitemp[32];
-
-void
-iic_read(uint devaddr, u_char *buf, uint offset, uint count)
-{
-	volatile iic_t		*iip;
-	volatile i2c8xx_t	*i2c;
-	volatile cbd_t		*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	u_char			*tb;
-	uint			temp;
-
-	/* If the interface has not been initialized, do that now.
-	*/
-	if (!iic_init_done)
-		iic_init();
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
-	rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
-
-	/* Send a "dummy write" operation.  This is a write request with
-	 * only the offset sent, followed by another start condition.
-	 * This will ensure we start reading from the first location
-	 * of the EEPROM.
-	 */
-	tb = iitemp;
-	tb = (u_char *)(((uint)tb + 15) & ~15);
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr & 0xfe;	/* Device address */
-	*(tb+1) = offset;		/* Offset */
-	tbdf->cbd_datlen = 2;		/* Length */
-	tbdf->cbd_sc =
-	      BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 3) == 0);
-
-	if (tbdf->cbd_sc & BD_SC_READY)
-		printf("IIC ra complete but tbuf ready\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#if 0
-	/* We can't do this...there is no serial port yet!
-	*/
-	if (temp == 0) {
-		printf("Timeout reading EEPROM\n");
-		return;
-	}
-#endif
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-
-	/* To read, we need an empty buffer of the proper length.
-	 * All that is used is the first byte for address, the remainder
-	 * is just used for timing (and doesn't really have to exist).
-	 */
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr | 1;	/* Device address */
-	rbdf->cbd_bufaddr = (uint)buf;		/* Desination buffer */
-	tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1;	/* Length */
-	tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Chip bug, set enable here.
-	*/
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 1) == 0);
-
-	if (rbdf->cbd_sc & BD_SC_EMPTY)
-		printf("IIC read complete but rbuf empty\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-}
diff --git a/arch/ppc/boot/simple/m8260_tty.c b/arch/ppc/boot/simple/m8260_tty.c
deleted file mode 100644
index d770947e9b8f..000000000000
--- a/arch/ppc/boot/simple/m8260_tty.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on SMC1.
- */
-#include <linux/types.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/immap_cpm2.h>
-
-uint	no_print;
-extern char	*params[];
-extern int	nparams;
-static		u_char	cons_hold[128], *sgptr;
-static		int	cons_hold_cnt;
-
-/* If defined, enables serial console.  The value (1 through 4)
- * should designate which SCC is used, but this isn't complete.  Only
- * SCC1 is known to work at this time.
- * We're only linked if SERIAL_CPM_CONSOLE=y, so we only need to test
- * SERIAL_CPM_SCC1.
- */
-#ifdef CONFIG_SERIAL_CPM_SCC1
-#define SCC_CONSOLE 1
-#endif
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-#ifdef SCC_CONSOLE
-	volatile scc_t		*sccp;
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-#endif
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm2_map_t	*ip;
-	volatile iop_cpm2_t	*io;
-	volatile cpm_cpm2_t	*cp;
-	uint	dpaddr, memaddr;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	cp = &ip->im_cpm;
-	io = &ip->im_ioport;
-
-	/* Perform a reset.
-	*/
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_ADS8260
-	/* Enable the RS-232 transceivers.
-	*/
-	*(volatile uint *)(BCSR_ADDR + 4) &=
-					~(BCSR1_RS232_EN1 | BCSR1_RS232_EN2);
-#endif
-
-#ifdef SCC_CONSOLE
-	sccp = (scc_t *)&(ip->im_scc[SCC_CONSOLE-1]);
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Use Port D for SCC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00000003;
-	io->iop_psord &= ~0x00000001;	/* Rx */
-	io->iop_psord |= 0x00000002;	/* Tx */
-	io->iop_pdird &= ~0x00000001;	/* Rx */
-	io->iop_pdird |= 0x00000002;	/* Tx */
-
-#else
-	sp = (smc_t*)&(ip->im_smc[0]);
-	*(ushort *)(&ip->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
-	up = (smc_uart_t *)&ip->im_dprambase[PROFF_SMC1];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* Use Port D for SMC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00c00000;
-	io->iop_pdird |= 0x00400000;
-	io->iop_pdird &= ~0x00800000;
-	io->iop_psord &= ~0x00c00000;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory.
-	 */
-	memaddr = (bd->bi_memsize - 256) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&ip->im_dprambase[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+128;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-#ifdef SCC_CONSOLE
-	sup->scc_genscc.scc_rbase = dpaddr;
-	sup->scc_genscc.scc_tbase = dpaddr + sizeof(cbd_t);
-
-	/* Set up the uart parameters in the
-	 * parameter ram.
-	 */
-	sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	sup->scc_genscc.scc_mrblr = 128;
-	sup->scc_maxidl = 8;
-	sup->scc_brkcr = 1;
-	sup->scc_parec = 0;
-	sup->scc_frmec = 0;
-	sup->scc_nosec = 0;
-	sup->scc_brkec = 0;
-	sup->scc_uaddr1 = 0;
-	sup->scc_uaddr2 = 0;
-	sup->scc_toseq = 0;
-	sup->scc_char1 = 0x8000;
-	sup->scc_char2 = 0x8000;
-	sup->scc_char3 = 0x8000;
-	sup->scc_char4 = 0x8000;
-	sup->scc_char5 = 0x8000;
-	sup->scc_char6 = 0x8000;
-	sup->scc_char7 = 0x8000;
-	sup->scc_char8 = 0x8000;
-	sup->scc_rccm = 0xc0ff;
-
-	/* Send the CPM an initialize command.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl =
-		(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-	/* Disable all interrupts and clear all pending
-	 * events.
-	 */
-	sccp->scc_sccm = 0;
-	sccp->scc_scce = 0xffff;
-	sccp->scc_dsr = 0x7e7e;
-	sccp->scc_psmr = 0x3000;
-
-	/* Wire BRG1 to SCC1.  The console driver will take care of
-	 * others.
-	 */
-	ip->im_cpmux.cmx_scr = 0;
-#else
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = CPMFCR_EB;
-	up->smc_tfcr = CPMFCR_EB;
-	up->smc_brklen = 0;
-	up->smc_brkec = 0;
-	up->smc_brkcr = 0;
-	up->smc_mrblr = 128;
-	up->smc_maxidl = 8;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 */
-	ip->im_cpmux.cmx_smr = 0;
-#endif
-
-	/* The baud rate divisor needs to be coordinated with clk_8260().
-	*/
-	ip->im_brgc1 =
-		(((bd->bi_brgfreq/16) / bd->bi_baudrate) << 1) |
-								CPM_BRG_EN;
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-#ifdef SCC_CONSOLE
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#else
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-int
-serial_readbuf(u_char *cbuf)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-	int	i, nc;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	nc = rbdf->cbd_datlen;
-	for (i=0; i<nc; i++)
-		*cbuf++ = *buf++;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(nc);
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	tbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_tbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	tbdf = (cbd_t *)&ip->im_dprambase[up->smc_tbase];
-#endif
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	char	c;
-
-	if (cons_hold_cnt <= 0) {
-		cons_hold_cnt = serial_readbuf(cons_hold);
-		sgptr = cons_hold;
-	}
-	c = *sgptr++;
-	cons_hold_cnt--;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c
deleted file mode 100644
index f28924e6aeb4..000000000000
--- a/arch/ppc/boot/simple/m8xx_tty.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on the MBX console.
- *
- * The MBX uses SMC1 for the serial port.  We reset the port and use
- * only the first BD that EPPC-Bug set up as a character FIFO.
- *
- * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
- * use COM1 instead of SMC1 as the console port.  This kinda sucks
- * for the rest of the kernel, so here we force the use of SMC1 again.
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-#ifdef CONFIG_MBX
-#define MBX_CSR1	((volatile u_char *)0xfa100000)
-#define CSR1_COMEN	(u_char)0x02
-#endif
-
-#ifdef TQM_SMC2_CONSOLE
-#define PROFF_CONS	PROFF_SMC2
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC2
-#define SMC_INDEX	1
-static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport);
-#else
-#define PROFF_CONS	PROFF_SMC1
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC1
-#define SMC_INDEX	0
-#endif
-
-static cpm8xx_t	*cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	uint	dpaddr, memaddr;
-#ifndef CONFIG_MBX
-	uint	ui;
-#endif
-
-	cp = cpmp;
-	sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]);
-	up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-#ifdef CONFIG_FADS
-	/* Enable SMC1/2 transceivers.
-	*/
-	*((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2);
-#endif
-
-#ifndef CONFIG_MBX
-	{
-	/* Initialize SMCx and use it for the console port.
-	 */
-
-	/* Enable SDMA.
-	*/
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-#ifdef TQM_SMC2_CONSOLE
-	/* Use Port A for SMC2 instead of other functions.
-	*/
-	iopp->iop_papar |=  0x00c0;
-	iopp->iop_padir &= ~0x00c0;
-	iopp->iop_paodr &= ~0x00c0;
-#else
-	/* Use Port B for SMCs instead of other functions.
-	*/
-	cp->cp_pbpar |= 0x00000cc0;
-	cp->cp_pbdir &= ~0x00000cc0;
-	cp->cp_pbodr &= ~0x00000cc0;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory for SMC FIFOs.
-	 */
-	memaddr = (bd->bi_memsize - 32) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+4;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 * This wires BRG1 to SMC1 and BRG2 to SMC2;
-	 */
-	cp->cp_simode = 0x10000000;
-	ui = bd->bi_intfreq / 16 / bd->bi_baudrate;
-#ifdef TQM_SMC2_CONSOLE
-	cp->cp_brgc2 =
-#else
-	cp->cp_brgc1 =
-#endif
-		((ui - 1) < 4096)
-		? (((ui - 1) << 1) | CPM_BRG_EN)
-		: ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16);
-
-#else /* CONFIG_MBX */
-	if (*MBX_CSR1 & CSR1_COMEN) {
-		/* COM1 is enabled.  Initialize SMC1 and use it for
-		 * the console port.
-		 */
-
-		/* Enable SDMA.
-		*/
-		((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-		/* Use Port B for SMCs instead of other functions.
-		*/
-		cp->cp_pbpar |= 0x00000cc0;
-		cp->cp_pbdir &= ~0x00000cc0;
-		cp->cp_pbodr &= ~0x00000cc0;
-
-		/* Allocate space for two buffer descriptors in the DP ram.
-		 * For now, this address seems OK, but it may have to
-		 * change with newer versions of the firmware.
-		 */
-		dpaddr = 0x0800;
-
-		/* Grab a few bytes from the top of memory.  EPPC-Bug isn't
-		 * running any more, so we can do this.
-		 */
-		memaddr = (bd->bi_memsize - 32) & ~15;
-
-		/* Set the physical address of the host memory buffers in
-		 * the buffer descriptors.
-		 */
-		rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-		rbdf->cbd_bufaddr = memaddr;
-		rbdf->cbd_sc = 0;
-		tbdf = rbdf + 1;
-		tbdf->cbd_bufaddr = memaddr+4;
-		tbdf->cbd_sc = 0;
-
-		/* Set up the uart parameters in the parameter ram.
-		*/
-		up->smc_rbase = dpaddr;
-		up->smc_tbase = dpaddr+sizeof(cbd_t);
-		up->smc_rfcr = SMC_EB;
-		up->smc_tfcr = SMC_EB;
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* Mask all interrupts and remove anything pending.
-		*/
-		sp->smc_smcm = 0;
-		sp->smc_smce = 0xff;
-
-		/* Set up the baud rate generator.
-		 * See 8xx_io/commproc.c for details.
-		 */
-		cp->cp_simode = 0x10000000;
-		cp->cp_brgc1 =
-			(((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN;
-
-		/* Enable SMC1 for console output.
-		*/
-		*MBX_CSR1 &= ~CSR1_COMEN;
-	}
-	else {
-#endif /* ndef CONFIG_MBX */
-		/* SMCx is used as console port.
-		*/
-		tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase];
-		rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase];
-
-		/* Issue a stop transmit, and wait for it.
-		*/
-		cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS,
-					CPM_CR_STOP_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	}
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Single character receive.
-	*/
-	up->smc_mrblr = 1;
-	up->smc_maxidl = 0;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-	char			c;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	c = *buf;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c
deleted file mode 100644
index 14a4b56d4f84..000000000000
--- a/arch/ppc/boot/simple/misc-chestnut.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Setup for the IBM Chestnut (ibm-750fxgx_eval)
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/chestnut.h>
-
-/* Not in the kernel so won't include kernel.h to get its 'max' definition */
-#define max(a,b)	(((a) > (b)) ? (a) : (b))
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, CHESTNUT_UART_BASE >> 16);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, CHESTNUT_UART_SIZE >> 16);
-	__asm__ __volatile__("sync");
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c
deleted file mode 100644
index 8a8614d11a32..000000000000
--- a/arch/ppc/boot/simple/misc-cpci690.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Add birec data for Force CPCI690 board.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <platforms/cpci690.h>
-
-#define	KB	(1024UL)
-#define	MB	(1024UL*KB)
-#define	GB	(1024UL*MB)
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-u32 mag = 0xffff;
-
-unsigned long
-get_mem_size(void)
-{
-	u32	size;
-
-	switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR))
-			& 0x07) {
-	case 0x01:
-		size = 256*MB;
-		break;
-	case 0x02:
-		size = 512*MB;
-		break;
-	case 0x03:
-		size = 768*MB;
-		break;
-	case 0x04:
-		size = 1*GB;
-		break;
-	case 0x05:
-		size = 1*GB + 512*MB;
-		break;
-	case 0x06:
-		size = 2*GB;
-		break;
-	default:
-		size = 0;
-	}
-
-	return size;
-}
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = CPCI690_MPSC_BAUD;
-	mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		(get_mem_size() >= (1*GB)) ? 100000000 : 133333333;
-}
diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c
deleted file mode 100644
index d5a00eb0e4eb..000000000000
--- a/arch/ppc/boot/simple/misc-embedded.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Originally adapted by Gary Thomas.  Much additional work by
- * Cort Dougan <cort@fsmlabs.com>.  On top of that still more work by
- * Dan Malek <dmalek@jlc.net>.
- *
- * Currently maintained by: Tom Rini <trini@kernel.crashing.org>
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/residual.h>
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#include "nonstdio.h"
-
-/* The linker tells us where the image is. */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-
-/* Because of the limited amount of memory on embedded, it presents
- * loading problems.  The biggest is that we load this boot program
- * into a relatively low memory address, and the Linux kernel Bss often
- * extends into this space when it get loaded.  When the kernel starts
- * and zeros the BSS space, it also writes over the information we
- * save here and pass to the kernel (usually board info).
- * On these boards, we grab some known memory holes to hold this information.
- */
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-
-/* This is for 4xx treeboot.  It provides a place for the bootrom
- * give us a pointer to a rom environment command line.
- */
-char *bootrom_cmdline = "";
-
-/* This is the default cmdline that will be given to the user at boot time..
- * If none was specified at compile time, we'll give it one that should work.
- * -- Tom */
-#ifdef CONFIG_CMDLINE_BOOL
-char compiled_string[] = CONFIG_CMDLINE;
-#endif
-char ramroot_string[] = "root=/dev/ram";
-char netroot_string[] = "root=/dev/nfs rw ip=on";
-
-/* Serial port to use. */
-unsigned long com_port;
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-extern unsigned long serial_init(int chan, bd_t *bp);
-extern void serial_close(unsigned long com_port);
-extern unsigned long start;
-extern void flush_instruction_cache(void);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void embed_config(bd_t **bp);
-
-/* Weak function for boards which don't need to build the
- * board info struct because they are using PPCBoot/U-Boot.
- */
-void __attribute__ ((weak))
-embed_config(bd_t **bdp)
-{
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
-{
-	char *cp, ch;
-	int timer = 0, zimage_size;
-	unsigned long initrd_size;
-
-	/* First, capture the embedded board information.  Then
-	 * initialize the serial console port.
-	 */
-	embed_config(&bp);
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \
-    defined(CONFIG_SERIAL_8250_CONSOLE) || \
-    defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	com_port = serial_init(0, bp);
-#endif
-
-	/* Grab some space for the command line and board info.  Since
-	 * we no longer use the ELF header, but it was loaded, grab
-	 * that space.
-	 */
-#ifdef CONFIG_MBX
-	/* Because of the way the MBX loads the ELF image, we can't
-	 * tell where we started.  We read a magic variable from the NVRAM
-	 * that gives us the intermediate buffer load address.
-	 */
-	load_addr = *(uint *)0xfa000020;
-	load_addr += 0x10000;		/* Skip ELF header */
-#endif
-	/* copy board data */
-	if (bp)
-		memcpy(hold_residual,bp,sizeof(bd_t));
-
-	/* Set end of memory available to us.  It is always the highest
-	 * memory address provided by the board information.
-	 */
-	end_avail = (char *)(bp->bi_memsize);
-
-	puts("\nloaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start ) {
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	if ( bp ) {
-		puts("board data at: "); puthex((unsigned long)bp);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)bp + sizeof(bd_t)));
-		puts("\nrelocated to:  ");
-		puthex((unsigned long)hold_residual);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to an arbitrary low address.  When we run, we
-	 * relocate ourself to that address.  __image_being points to
-	 * the part of the image where the zImage is. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-	/*
-	 * setup avail_ram - this is the first part of ram usable
-	 * by the uncompress code.  Anything after this program in RAM
-	 * is now fair game. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	/* This is where we try and pick the right command line for booting.
-	 * If we were given one at compile time, use it.  It Is Right.
-	 * If we weren't, see if we have a ramdisk.  If so, thats root.
-	 * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom
-	 */
-#ifdef CONFIG_CMDLINE_BOOL
-	memcpy (cmd_line, compiled_string, sizeof(compiled_string));
-#else
-	if ( initrd_size )
-		memcpy (cmd_line, ramroot_string, sizeof(ramroot_string));
-	else
-		memcpy (cmd_line, netroot_string, sizeof(netroot_string));
-#endif
-	while ( *cp )
-		putc(*cp++);
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else if (ch == '\030'		/* ^x */
-					   || ch == '\025') {	/* ^u */
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-	puts("\nUncompressing Linux...");
-
-	gunzip(0, 0x400000, zimage_start, &zimage_size);
-	flush_instruction_cache();
-	puts("done.\n");
-	{
-		struct bi_record *rec;
-		unsigned long initrd_loc = 0;
-		unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) +
-				(1 << 20) - 1, (1 << 20));
-		rec = (struct bi_record *)rec_loc;
-
-		/* We need to make sure that the initrd and bi_recs do not
-		 * overlap. */
-		if ( initrd_size ) {
-			initrd_loc = (unsigned long)(&__ramdisk_begin);
-			/* If the bi_recs are in the middle of the current
-			 * initrd, move the initrd to the next MB
-			 * boundary. */
-			if ((rec_loc > initrd_loc) &&
-					((initrd_loc + initrd_size)
-					 > rec_loc)) {
-				initrd_loc = _ALIGN((unsigned long)(zimage_size)
-						+ (2 << 20) - 1, (2 << 20));
-			 	memmove((void *)initrd_loc, &__ramdisk_begin,
-					 initrd_size);
-		         	puts("initrd moved:  "); puthex(initrd_loc);
-			 	puts(" "); puthex(initrd_loc + initrd_size);
-			 	puts("\n");
-			}
-		}
-
-		rec->tag = BI_FIRST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		rec->tag = BI_CMD_LINE;
-		memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-		rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		if ( initrd_size ) {
-			rec->tag = BI_INITRD;
-			rec->data[0] = initrd_loc;
-			rec->data[1] = initrd_size;
-			rec->size = sizeof(struct bi_record) + 2 *
-				sizeof(unsigned long);
-			rec = (struct bi_record *)((unsigned long)rec +
-					rec->size);
-		}
-
-		rec->tag = BI_LAST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
-	puts("Now booting the kernel\n");
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
-	serial_close(com_port);
-#endif
-
-	return (unsigned long)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c
deleted file mode 100644
index 0b3978632aca..000000000000
--- a/arch/ppc/boot/simple/misc-ev64260.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board
- * with a GT64260 onboard.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64260.h>
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	p, v;
-
-	/* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */
-	p = mfspr(SPRN_PVR);
-	p >>= 16;
-
-	/* Reasonable SWAG at a 745x PVR value */
-	if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) {
-		v = mfspr(SPRN_HID0);
-		v |= HID0_TBEN;
-		mtspr(SPRN_HID0, v);
-	}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20);
-	__asm__ __volatile__("sync");
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = EV64260_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c
deleted file mode 100644
index 96eaebb78df5..000000000000
--- a/arch/ppc/boot/simple/misc-ev64360.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2005 Lee Nicks <allinux@gmail.com>
- *
- * Based on arch/ppc/boot/simple/misc-katana.c from:
- * Mark A. Greer <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64360.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud  = EV64360_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src  = EV64360_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-}
diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c
deleted file mode 100644
index 79a1bbcbc6c5..000000000000
--- a/arch/ppc/boot/simple/misc-katana.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Set up MPSC values to bootwrapper can prompt user.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/katana.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-unsigned long mv64360_get_mem_size(void);
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = KATANA_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = KATANA_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE),
-			MV64x60_TCLK_FREQ_MAX);
-}
-
-unsigned long
-get_mem_size(void)
-{
-	return mv64360_get_mem_size();
-}
diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c
deleted file mode 100644
index 28b3108083ed..000000000000
--- a/arch/ppc/boot/simple/misc-mv64x60.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Relocate bridge's register base and call board specific routine.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-	int num_words, unsigned long cksum);
-
-
-u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = {
-	MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE,
-	MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE
-};
-
-/* Read mem ctlr to get the amount of mem in system */
-unsigned long
-mv64360_get_mem_size(void)
-{
-	u32	enables, i, v;
-	u32	mem = 0;
-
-	enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE +
-		MV64360_CPU_BAR_ENABLE) & 0xf;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		if (!(enables & (1<<i))) {
-			v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE
-				+ size_reg[i]) & 0xffff;
-			v = (v + 1) << 16;
-			mem += v;
-		}
-
-	return mem;
-}
-
-void
-mv64x60_move_base(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	bits, mask, b;
-
-	if (old_base != new_base) {
-#ifdef CONFIG_GT64260
-		bits = 12;
-		mask = 0x07000000;
-#else /* Must be mv64[34]60 */
-		bits = 16;
-		mask = 0x03000000;
-#endif
-		b = in_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE);
-		b &= mask;
-		b |= ((u32)new_base >> (32 - bits));
-		out_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE, b);
-
-		__asm__ __volatile__("sync");
-
-		/* Wait for change to happen (in accordance with the manual) */
-		while (in_le32(new_base + MV64x60_INTERNAL_SPACE_DECODE) != b);
-	}
-}
-
-void __attribute__ ((weak))
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	mv64x60_move_base((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	mv64x60_board_init((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c
deleted file mode 100644
index 0086e1cfb48c..000000000000
--- a/arch/ppc/boot/simple/misc-prep.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu>
- */
-
-#include <linux/pci_ids.h>
-#include <linux/types.h>
-#include <asm/residual.h>
-#include <asm/string.h>
-#include <asm/byteorder.h>
-#include "mpc10x.h"
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern int keyb_present;	/* keyboard controller is present by default */
-RESIDUAL hold_resid_buf;
-RESIDUAL *hold_residual = &hold_resid_buf;
-static void *OFW_interface;	/* Pointer to OF, if available. */
-
-#ifdef CONFIG_VGA_CONSOLE
-char *vidmem = (char *)0xC00B8000;
-int lines = 25, cols = 80;
-int orig_x, orig_y = 24;
-#endif /* CONFIG_VGA_CONSOLE */
-
-extern int CRT_tstc(void);
-extern int vga_init(unsigned char *ISA_mem);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_fixups(void);
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-		int num_words, unsigned long cksum);
-extern void disable_6xx_mmu(void);
-extern unsigned long mpc10x_get_mem_size(void);
-
-static void
-writel(unsigned int val, unsigned int address)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)address = cpu_to_le32(val);
-}
-
-#define PCI_CFG_ADDR(dev,off)	((0x80<<24) | (dev<<8) | (off&0xfc))
-#define PCI_CFG_DATA(off)	(MPC10X_MAPA_CNFG_DATA+(off&3))
-
-static void
-pci_read_config_32(unsigned char devfn,
-		unsigned char offset,
-		unsigned int *val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)PCI_CFG_ADDR(devfn,offset) =
-		cpu_to_le32(MPC10X_MAPA_CNFG_ADDR);
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*val = le32_to_cpu(*(unsigned int *)PCI_CFG_DATA(offset));
-	return;
-}
-
-#ifdef CONFIG_VGA_CONSOLE
-void
-scroll(void)
-{
-	int i;
-
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
-		vidmem[i] = ' ';
-}
-#endif /* CONFIG_VGA_CONSOLE */
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		  RESIDUAL *residual, void *OFW)
-{
-	int start_multi = 0;
-	unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base;
-
-	/* If we have Open Firmware, initialise it immediately */
-	if (OFW) {
-		OFW_interface = OFW;
-		ofinit(OFW_interface);
-	}
-
-	board_isa_init();
-#if defined(CONFIG_VGA_CONSOLE)
-	vga_init((unsigned char *)0xC0000000);
-#endif /* CONFIG_VGA_CONSOLE */
-
-	if (residual) {
-		/* Is this Motorola PPCBug? */
-		if ((1 & residual->VitalProductData.FirmwareSupports) &&
-		    (1 == residual->VitalProductData.FirmwareSupplier)) {
-			unsigned char base_mod;
-			unsigned char board_type = inb(0x801) & 0xF0;
-
-			/*
-			 * Reset the onboard 21x4x Ethernet
-			 * Motorola Ethernet is at IDSEL 14 (devfn 0x70)
-			 */
-			pci_read_config_32(0x70, 0x00, &pci_viddid);
-			pci_did = (pci_viddid & 0xffff0000) >> 16;
-			/* Be sure we've really found a 21x4x chip */
-			if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_DEC) &&
-				((pci_did == PCI_DEVICE_ID_DEC_TULIP_FAST) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP_PLUS) ||
-				(pci_did == PCI_DEVICE_ID_DEC_21142))) {
-				pci_read_config_32(0x70,
-						0x10,
-						&tulip_pci_base);
-				/* Get the physical base address */
-				tulip_base =
-					(tulip_pci_base & ~0x03UL) + 0x80000000;
-				/* Strobe the 21x4x reset bit in CSR0 */
-				writel(0x1, tulip_base);
-			}
-
-			/* If this is genesis 2 board then check for no
-			 * keyboard controller and more than one processor.
-			 */
-			if (board_type == 0xe0) {
-				base_mod = inb(0x803);
-				/* if a MVME2300/2400 or a Sitka then no keyboard */
-				if((base_mod == 0xFA) || (base_mod == 0xF9) ||
-				   (base_mod == 0xE1)) {
-					keyb_present = 0;	/* no keyboard */
-				}
-			}
-			/* If this is a multiprocessor system then
-			 * park the other processor so that the
-			 * kernel knows where to find them.
-			 */
-			if (residual->MaxNumCpus > 1)
-				start_multi = 1;
-		}
-		memcpy(hold_residual,residual,sizeof(RESIDUAL));
-        }
-
-	/* Call decompress_kernel */
-	decompress_kernel(load_addr, num_words, cksum);
-
-	if (start_multi) {
-		residual->VitalProductData.SmpIar = (unsigned long)0xc0;
-		residual->Cpus[1].CpuState = CPU_GOOD;
-		hold_residual->VitalProductData.Reserved5 = 0xdeadbeef;
-	}
-
-	/* Now go and clear out the BATs and ensure that our MSR is
-	 * correct .*/
-	disable_6xx_mmu();
-
-	/* Make r3 be a pointer to the residual data. */
-	return (unsigned long)hold_residual;
-}
-
-unsigned long
-get_mem_size(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	/* First, figure out what kind of host bridge we are on.  If it's
-	 * an MPC10x, we can ask it directly how much memory it has.
-	 * Otherwise, see if the residual data has anything.  This isn't
-	 * the best way, but it can be the only way.  If there's nothing,
-	 * assume 32MB. -- Tom.
-	 */
-	/* See what our host bridge is. */
-	pci_read_config_32(0x00, 0x00, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	/* See if we are on an MPC10x. */
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_MPC105)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC106)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC107)))
-		return mpc10x_get_mem_size();
-	/* If it's not, see if we have anything in the residual data. */
-	else if (hold_residual && hold_residual->TotalMemory)
-		return hold_residual->TotalMemory;
-	else if (OFW_interface) {
-		/*
-		 * This is a 'best guess' check.  We want to make sure
-		 * we don't try this on a PReP box without OF
-		 *     -- Cort
-		 */
-		while (OFW_interface)
-		{
-			phandle dev_handle;
-			int mem_info[2];
-
-			/* get handle to memory description */
-			if (!(dev_handle = finddevice("/memory@0")))
-				break;
-
-			/* get the info */
-			if (getprop(dev_handle, "reg", mem_info,
-						sizeof(mem_info)) != 8)
-				break;
-
-			return mem_info[1];
-		}
-	}
-
-	/* Fall back to hard-coding 32MB. */
-	return 32*1024*1024;
-}
diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c
deleted file mode 100644
index 0f302ea9c3d1..000000000000
--- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Misc data for Radstone PPC7D board.
- *
- * Author: James Chapman <jchapman@katalix.com>
- */
-
-#include <linux/types.h>
-#include <platforms/radstone_ppc7d.h>
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = PPC7D_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = PPC7D_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = PPC7D_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c
deleted file mode 100644
index 5b3a6c6f113b..000000000000
--- a/arch/ppc/boot/simple/misc-spruce.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Misc. bootloader code for IBM Spruce reference platform
- *
- * Authors: Johnnie Peters <jpeters@mvista.com>
- *	    Matt Porter <mporter@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* Define some important locations of the Spruce. */
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-/* PCI configuration space access routines. */
-unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR;
-unsigned char *pci_config_data   = (unsigned char *)SPRUCE_PCI_CONFIG_DATA;
-
-void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff;
-}
-
-void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_8(pci_config_data + (offset&3), val);
-}
-
-void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le16((unsigned short *)(pci_config_data + (offset&3)));
-}
-
-void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le16((unsigned short *)(pci_config_data + (offset&3)), val);
-}
-
-void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le32((unsigned *)pci_config_data);
-}
-
-void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le32((unsigned *)pci_config_data, val);
-}
-
-#define PCNET32_WIO_RDP		0x10
-#define PCNET32_WIO_RAP		0x12
-#define PCNET32_WIO_RESET	0x14
-
-#define PCNET32_DWIO_RDP	0x10
-#define PCNET32_DWIO_RAP	0x14
-#define PCNET32_DWIO_RESET	0x18
-
-/* Processor interface config register access */
-#define PIFCFGADDR 0xff500000
-#define PIFCFGDATA 0xff500004
-
-#define PLBMIFOPT 0x18 /* PLB Master Interface Options */
-
-#define MEM_MBEN	0x24
-#define MEM_TYPE	0x28
-#define MEM_B1SA	0x3c
-#define MEM_B1EA	0x5c
-#define MEM_B2SA	0x40
-#define MEM_B2EA	0x60
-
-unsigned long
-get_mem_size(void)
-{
-	int loop;
-	unsigned long mem_size = 0;
-	unsigned long mem_mben;
-	unsigned long mem_type;
-	unsigned long mem_start;
-	unsigned long mem_end;
-	volatile int *mem_addr = (int *)0xff500008;
-	volatile int *mem_data = (int *)0xff50000c;
-
-	/* Get the size of memory from the memory controller. */
-	*mem_addr = MEM_MBEN;
-	asm("sync");
-	mem_mben = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	asm("sync");
-	mem_type = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	/* Confirm bank 1 has DRAM memory */
-	if ((mem_mben & 0x40000000) &&
-				((mem_type & 0x30000000) == 0x10000000)) {
-		*mem_addr = MEM_B1SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B1EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size = mem_end - mem_start + 0x100000;
-	}
-
-	/* Confirm bank 2 has DRAM memory */
-	if ((mem_mben & 0x20000000) &&
-				((mem_type & 0xc000000) == 0x4000000)) {
-		*mem_addr = MEM_B2SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B2EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size += mem_end - mem_start + 0x100000;
-	}
-	return mem_size;
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	int csr0;
-	int csr_id;
-	int pci_devfn;
-	int found_multi = 0;
-	unsigned short vendor;
-	unsigned short device;
-	unsigned short command;
-	unsigned char header_type;
-	unsigned int bar0;
-	volatile int *pif_addr = (int *)0xff500000;
-	volatile int *pif_data = (int *)0xff500004;
-
-	/*
-	 * Gah, these firmware guys need to learn that hardware
-	 * byte swapping is evil! Disable all hardware byte
-	 * swapping so it doesn't hurt anyone.
-	 */
-	*pif_addr = PLBMIFOPT;
-	asm("sync");
-	*pif_data = 0x00000000;
-	asm("sync");
-
-	/* Search out and turn off the PcNet ethernet boot device. */
-	for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) {
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		cpc700_pcibios_read_config_byte(0, pci_devfn,
-				PCI_HEADER_TYPE, &header_type);
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID,
-				&vendor);
-
-		if (vendor != 0xffff) {
-			cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_DEVICE_ID, &device);
-
-			/* If this PCI device is the Lance PCNet board then turn it off */
-			if ((vendor == PCI_VENDOR_ID_AMD) &&
-					(device == PCI_DEVICE_ID_AMD_LANCE)) {
-
-				/* Turn on I/O Space on the board. */
-				cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_COMMAND, &command);
-				command |= 0x1;
-				cpc700_pcibios_write_config_word(0, pci_devfn,
-						PCI_COMMAND, command);
-
-				/* Get the I/O space address */
-				cpc700_pcibios_read_config_dword(0, pci_devfn,
-						PCI_BASE_ADDRESS_0, &bar0);
-				bar0 &= 0xfffffffe;
-
-				/* Reset the PCNet Board */
-				inl (bar0+PCNET32_DWIO_RESET);
-				inw (bar0+PCNET32_WIO_RESET);
-
-				/* First do a work oriented read of csr0.  If the value is
-				 * 4 then this is the correct mode to access the board.
-				 * If not try a double word ortiented read.
-				 */
-				outw(0, bar0 + PCNET32_WIO_RAP);
-				csr0 = inw(bar0 + PCNET32_WIO_RDP);
-
-				if (csr0 == 4) {
-					/* Check the Chip id register */
-					outw(88, bar0 + PCNET32_WIO_RAP);
-					csr_id = inw(bar0 + PCNET32_WIO_RDP);
-
-					if (csr_id) {
-						/* This is the valid mode - set the stop bit */
-						outw(0, bar0 + PCNET32_WIO_RAP);
-						outw(csr0, bar0 + PCNET32_WIO_RDP);
-					}
-				} else {
-					outl(0, bar0 + PCNET32_DWIO_RAP);
-					csr0 = inl(bar0 + PCNET32_DWIO_RDP);
-					if (csr0 == 4) {
-						/* Check the Chip id register */
-						outl(88, bar0 + PCNET32_WIO_RAP);
-						csr_id = inl(bar0 + PCNET32_WIO_RDP);
-
-						if (csr_id) {
-							/* This is the valid mode  - set the stop bit*/
-							outl(0, bar0 + PCNET32_WIO_RAP);
-							outl(csr0, bar0 + PCNET32_WIO_RDP);
-						}
-					}
-				}
-			}
-		}
-	}
-
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
deleted file mode 100644
index c3d3305eb5ca..000000000000
--- a/arch/ppc/boot/simple/misc.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Misc. bootloader code for many machines.  This assumes you have are using
- * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
- * below 8MB is free.  Finally, it assumes you have a NS16550-style uart for
- * your serial console.  If a machine meets these requirements, it can quite
- * likely use this code during boot.
- *
- * Author: Matt Porter <mporter@mvista.com>
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/bootinfo.h>
-#ifdef CONFIG_4xx
-#include <asm/ibm4xx.h>
-#endif
-#include <asm/reg.h>
-
-#include "nonstdio.h"
-
-/* Default cmdline */
-#ifdef CONFIG_CMDLINE
-#define CMDLINE CONFIG_CMDLINE
-#else
-#define CMDLINE ""
-#endif
-
-/* Keyboard (and VGA console)? */
-#ifdef CONFIG_VGA_CONSOLE
-#define HAS_KEYB 1
-#else
-#define HAS_KEYB 0
-#endif
-
-/* Will / Can the user give input?
- */
-#if (defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_VGA_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE))
-#define INTERACTIVE_CONSOLE	1
-#endif
-
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-char cmd_preset[] = CMDLINE;
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-int keyb_present = HAS_KEYB;
-int zimage_size;
-
-unsigned long com_port;
-unsigned long initrd_size = 0;
-
-/* The linker tells us various locations in the image */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-/* Original location */
-extern unsigned long start;
-
-extern int CRT_tstc(void);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_close(unsigned long com_port);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void serial_fixups(void);
-
-/* Allow get_mem_size to be hooked into.  This is the default. */
-unsigned long __attribute__ ((weak))
-get_mem_size(void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_40x)
-#define PPC4xx_EMAC0_MR0	EMAC0_BASE
-#endif
-
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0
-#endif
-
-struct bi_record *
-decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
-{
-#ifdef INTERACTIVE_CONSOLE
-	int timer = 0;
-	char ch;
-#endif
-	char *cp;
-	struct bi_record *rec;
-	unsigned long initrd_loc = 0, TotalMemory = 0;
-
-#if defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	com_port = serial_init(0, NULL);
-#endif
-
-#if defined(PPC4xx_EMAC0_MR0)
-	/* Reset MAL */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
-	/* Wait for reset */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
-	/* Reset EMAC */
-	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
-	__asm__ __volatile__("eieio");
-#endif
-
-	/*
-	 * Call get_mem_size(), which is memory controller dependent,
-	 * and we must have the correct file linked in here.
-	 */
-	TotalMemory = get_mem_size();
-
-	/* assume the chunk below 8M is free */
-	end_avail = (char *)0x00800000;
-
-	/*
-	 * Reveal where we were loaded at and where we
-	 * were relocated to.
-	 */
-	puts("loaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words)));
-	puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start )
-	{
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to 0x00800000.  When we run, we relocate
-	 * ourselves there.  So we just need __image_begin for the
-	 * start. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
-	avail_ram = (char *)0x00400000;
-#endif
-	end_avail = (char *)0x00800000;
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-
-	if (keyb_present)
-		CRT_tstc();  /* Forces keyboard to be initialized */
-
-	/* Display standard Linux/PPC boot prompt for kernel args */
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
-	while ( *cp ) putc(*cp++);
-
-#ifdef INTERACTIVE_CONSOLE
-	/*
-	 * If they have a console, allow them to edit the command line.
-	 * Otherwise, don't bother wasting the five seconds.
-	 */
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				/* Test for backspace/delete */
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				/* Test for ^x/^u (and wipe the line) */
-				} else if (ch == '\030' || ch == '\025') {
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-#endif
-	puts("\n");
-
-	puts("Uncompressing Linux...");
-	gunzip(NULL, 0x400000, zimage_start, &zimage_size);
-	puts("done.\n");
-
-	/* get the bi_rec address */
-	rec = bootinfo_addr(zimage_size);
-
-	/* We need to make sure that the initrd and bi_recs do not
-	 * overlap. */
-	if ( initrd_size ) {
-		unsigned long rec_loc = (unsigned long) rec;
-		initrd_loc = (unsigned long)(&__ramdisk_begin);
-		/* If the bi_recs are in the middle of the current
-		 * initrd, move the initrd to the next MB
-		 * boundary. */
-		if ((rec_loc > initrd_loc) &&
-				((initrd_loc + initrd_size) > rec_loc)) {
-			initrd_loc = _ALIGN((unsigned long)(zimage_size)
-					+ (2 << 20) - 1, (2 << 20));
-		 	memmove((void *)initrd_loc, &__ramdisk_begin,
-				 initrd_size);
-	         	puts("initrd moved:  "); puthex(initrd_loc);
-		 	puts(" "); puthex(initrd_loc + initrd_size);
-		 	puts("\n");
-		}
-	}
-
-	bootinfo_init(rec);
-	if ( TotalMemory )
-		bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory);
-
-	bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line);
-
-	/* add a bi_rec for the initrd if it exists */
-	if (initrd_size) {
-		unsigned long initrd[2];
-
-		initrd[0] = initrd_loc;
-		initrd[1] = initrd_size;
-
-		bootinfo_append(BI_INITRD, sizeof(initrd), &initrd);
-	}
-	puts("Now booting the kernel\n");
-	serial_close(com_port);
-
-	return rec;
-}
-
-void __attribute__ ((weak))
-board_isa_init(void)
-{
-}
-
-/* Allow decompress_kernel to be hooked into.  This is the default. */
-void * __attribute__ ((weak))
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-		board_isa_init();
-		return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c
deleted file mode 100644
index 8da8f576031d..000000000000
--- a/arch/ppc/boot/simple/mpc10x_memory.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * A routine to find out how much memory the machine has.
- *
- * Based on:
- * arch/ppc/kernel/mpc10x_common.c
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pci.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include "mpc10x.h"
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-/*
- * PCI config space macros, similar to indirect_xxx and early_xxx macros.
- * We assume bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, 			\
-		unsigned int *cfg_data, int devfn, int offset,		\
-		type val)						\
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read, byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.  On CONFIG_PPC_PREP, we know we are being called
- * under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map.  Further, on CONFIG_PPC_PREP we must rename
- * this function.
- */
-#ifdef CONFIG_PPC_PREP
-#define get_mem_size mpc10x_get_mem_size
-#endif
-unsigned long
-get_mem_size(void)
-{
-	unsigned int *config_addr, *config_data, val;
-	unsigned long start, end, total, offset;
-	int i;
-	unsigned char bank_enables;
-
-#ifdef CONFIG_PPC_PREP
-	config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA;
-#else
-	config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA;
-#endif
-
-	mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
-			MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
-
-	total = 0;
-
-	for (i = 0; i < 8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c
deleted file mode 100644
index 6955891fb031..000000000000
--- a/arch/ppc/boot/simple/mpc52xx_tty.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Minimal serial functions needed to send messages out a MPC52xx
- * Programmable Serial Controller (PSC).
- *
- * Author: Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-
-#ifdef MPC52xx_PF_CONSOLE_PORT
-#define MPC52xx_CONSOLE MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT)
-#define MPC52xx_PSC_CONFIG_SHIFT ((MPC52xx_PF_CONSOLE_PORT-1)<<2)
-#else
-#error "MPC52xx_PF_CONSOLE_PORT not defined"
-#endif
-
-static struct mpc52xx_psc __iomem *psc =
-	(struct mpc52xx_psc __iomem *) MPC52xx_PA(MPC52xx_CONSOLE);
-
-/* The decrementer counts at the system bus clock frequency
- * divided by four.  The most accurate time base is connected to the
- * rtc.  We read the decrementer change during one rtc tick
- * and multiply by 4 to get the system bus clock frequency. Since a
- * rtc tick is one seconds, and that's pretty long, we change the rtc
- * dividers temporarily to set them 64x faster ;)
- */
-static int
-mpc52xx_ipbfreq(void)
-{
-	struct mpc52xx_rtc __iomem *rtc =
-		(struct mpc52xx_rtc __iomem *) MPC52xx_PA(MPC52xx_RTC_OFFSET);
-	struct mpc52xx_cdm __iomem *cdm =
-		(struct mpc52xx_cdm __iomem *) MPC52xx_PA(MPC52xx_CDM_OFFSET);
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	int xlbfreq, ipbfreq;
-
-	out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-	previous_time = in_be32(&rtc->time);
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_start = get_tbl();
-	previous_time = current_time;
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_end = get_tbl();
-	out_be32(&rtc->dividers, 0xffff0000);   /* Restore RTC */
-
-	xlbfreq = (tbl_end - tbl_start) << 8;
-	ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ? xlbfreq / 2 : xlbfreq;
-
-	return ipbfreq;
-}
-
-unsigned long
-serial_init(int ignored, void *ignored2)
-{
-	struct mpc52xx_gpio __iomem *gpio =
-		(struct mpc52xx_gpio __iomem *) MPC52xx_PA(MPC52xx_GPIO_OFFSET);
-	int divisor;
-	int mode1;
-	int mode2;
-	u32 val32;
-
-	static int been_here = 0;
-
-	if (been_here)
-		return 0;
-
-	been_here = 1;
-
-	val32 = in_be32(&gpio->port_config);
-	val32 &= ~(0x7 << MPC52xx_PSC_CONFIG_SHIFT);
-	val32 |= MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD
-				<< MPC52xx_PSC_CONFIG_SHIFT;
-	out_be32(&gpio->port_config, val32);
-
-	out_8(&psc->command, MPC52xx_PSC_RST_TX
-			| MPC52xx_PSC_RX_DISABLE | MPC52xx_PSC_TX_ENABLE);
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-
-	out_be32(&psc->sicr, 0x0);
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-	out_be16(&psc->tfalarm, 0xf8);
-
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1
-			| MPC52xx_PSC_RX_ENABLE
-			| MPC52xx_PSC_TX_ENABLE);
-
-	divisor = ((mpc52xx_ipbfreq()
-			/ (CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD * 16)) + 1) >> 1;
-
-	mode1 = MPC52xx_PSC_MODE_8_BITS | MPC52xx_PSC_MODE_PARNONE
-			| MPC52xx_PSC_MODE_ERR;
-	mode2 = MPC52xx_PSC_MODE_ONE_STOP;
-
-	out_8(&psc->ctur, divisor>>8);
-	out_8(&psc->ctlr, divisor);
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
-	out_8(&psc->mode, mode1);
-	out_8(&psc->mode, mode2);
-
-	return 0;	/* ignored */
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	serial_init(0, NULL);
-
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-}
-
-char
-serial_getc(void *ignored)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY)) ;
-
-	return in_8(&psc->mpc52xx_psc_buffer_8);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	return (in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY) != 0;
-}
diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c
deleted file mode 100644
index 8a735787a6e9..000000000000
--- a/arch/ppc/boot/simple/mv64x60_tty.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60.
- * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* This code assumes that the data cache has been disabled (L1, L2, L3). */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <mpsc_defs.h>
-
-#ifdef CONFIG_EV64360
-#include <platforms/ev64360.h>
-u32	mv64x60_console_baud = EV64360_DEFAULT_BAUD;
-u32	mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-#else
-u32	mv64x60_console_baud = 9600;
-u32	mv64x60_mpsc_clk_src = 8; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = 100000000;
-#endif
-
-extern void udelay(long);
-static void stop_dma(int chan);
-
-static void __iomem *mv64x60_base = (void __iomem *)CONFIG_MV64X60_NEW_BASE;
-
-struct sdma_regs {
-	u32	sdc;
-	u32	sdcm;
-	u32	rx_desc;
-	u32	rx_buf_ptr;
-	u32	scrdp;
-	u32	tx_desc;
-	u32	sctdp;
-	u32	sftdp;
-};
-
-static struct sdma_regs	sdma_regs[2];
-
-#define	SDMA_REGS_INIT(s, reg_base) {			\
-	(s)->sdc	= (reg_base) + SDMA_SDC;	\
-	(s)->sdcm	= (reg_base) + SDMA_SDCM;	\
-	(s)->rx_desc	= (reg_base) + SDMA_RX_DESC;	\
-	(s)->rx_buf_ptr = (reg_base) + SDMA_RX_BUF_PTR;	\
-	(s)->scrdp	= (reg_base) + SDMA_SCRDP;	\
-	(s)->tx_desc	= (reg_base) + SDMA_TX_DESC;	\
-	(s)->sctdp	= (reg_base) + SDMA_SCTDP;	\
-	(s)->sftdp	= (reg_base) + SDMA_SFTDP;	\
-}
-
-static u32	mpsc_base[2] = { MV64x60_MPSC_0_OFFSET, MV64x60_MPSC_1_OFFSET };
-
-struct mv64x60_rx_desc {
-	u16	bufsize;
-	u16	bytecnt;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-struct mv64x60_tx_desc {
-	u16	bytecnt;
-	u16	shadow;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-#define	MAX_RESET_WAIT	10000
-#define	MAX_TX_WAIT	10000
-
-#define	RX_NUM_DESC	2
-#define	TX_NUM_DESC	2
-
-#define	RX_BUF_SIZE	32
-#define	TX_BUF_SIZE	32
-
-static struct mv64x60_rx_desc rd[2][RX_NUM_DESC] __attribute__ ((aligned(32)));
-static struct mv64x60_tx_desc td[2][TX_NUM_DESC] __attribute__ ((aligned(32)));
-
-static char rx_buf[2][RX_NUM_DESC * RX_BUF_SIZE] __attribute__ ((aligned(32)));
-static char tx_buf[2][TX_NUM_DESC * TX_BUF_SIZE] __attribute__ ((aligned(32)));
-
-static int cur_rd[2] = { 0, 0 };
-static int cur_td[2] = { 0, 0 };
-
-static char chan_initialized[2] = { 0, 0 };
-
-
-#define	RX_INIT_RDP(rdp) {			\
-	(rdp)->bufsize = 2;			\
-	(rdp)->bytecnt = 0;			\
-	(rdp)->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |	\
-		SDMA_DESC_CMDSTAT_O;	\
-}
-
-#ifdef CONFIG_MV64360
-static u32 cpu2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64x60_CPU2MEM_0_BASE, MV64x60_CPU2MEM_0_SIZE },
-		{ MV64x60_CPU2MEM_1_BASE, MV64x60_CPU2MEM_1_SIZE },
-		{ MV64x60_CPU2MEM_2_BASE, MV64x60_CPU2MEM_2_SIZE },
-		{ MV64x60_CPU2MEM_3_BASE, MV64x60_CPU2MEM_3_SIZE }
-};
-
-static u32 com2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64360_MPSC2MEM_0_BASE, MV64360_MPSC2MEM_0_SIZE },
-		{ MV64360_MPSC2MEM_1_BASE, MV64360_MPSC2MEM_1_SIZE },
-		{ MV64360_MPSC2MEM_2_BASE, MV64360_MPSC2MEM_2_SIZE },
-		{ MV64360_MPSC2MEM_3_BASE, MV64360_MPSC2MEM_3_SIZE }
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] = { 0xe, 0xd, 0xb, 0x7 };
-#endif
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	u32		mpsc_routing_base, sdma_base, brg_bcr, cdv;
-	int		i;
-
-	chan = (chan == 1); /* default to chan 0 if anything but 1 */
-
-	if (chan_initialized[chan])
-		return chan;
-
-	chan_initialized[chan] = 1;
-
-	if (chan == 0) {
-		sdma_base = MV64x60_SDMA_0_OFFSET;
-		brg_bcr = MV64x60_BRG_0_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_0_OFFSET);
-	} else {
-		sdma_base = MV64x60_SDMA_1_OFFSET;
-		brg_bcr = MV64x60_BRG_1_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_1_OFFSET);
-	}
-
-	mpsc_routing_base = MV64x60_MPSC_ROUTING_OFFSET;
-
-	stop_dma(chan);
-
-	/* Set up ring buffers */
-	for (i=0; i<RX_NUM_DESC; i++) {
-		RX_INIT_RDP(&rd[chan][i]);
-		rd[chan][i].buffer = (u32)&rx_buf[chan][i * RX_BUF_SIZE];
-		rd[chan][i].next_desc_ptr = (u32)&rd[chan][i+1];
-	}
-	rd[chan][RX_NUM_DESC - 1].next_desc_ptr = (u32)&rd[chan][0];
-
-	for (i=0; i<TX_NUM_DESC; i++) {
-		td[chan][i].bytecnt = 0;
-		td[chan][i].shadow = 0;
-		td[chan][i].buffer = (u32)&tx_buf[chan][i * TX_BUF_SIZE];
-		td[chan][i].cmd_stat = SDMA_DESC_CMDSTAT_F|SDMA_DESC_CMDSTAT_L;
-		td[chan][i].next_desc_ptr = (u32)&td[chan][i+1];
-	}
-	td[chan][TX_NUM_DESC - 1].next_desc_ptr = (u32)&td[chan][0];
-
-	/* Set MPSC Routing */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_MRR, 0x3ffffe38);
-
-#ifdef CONFIG_GT64260
-	out_le32(mv64x60_base + GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-#else /* Must be MV64360 or MV64460 */
-	{
-	u32	enables, prot_bits, v;
-
-	/* Set up comm unit to memory mapping windows */
-	/* Note: Assumes MV64x60_CPU2MEM_WINDOWS == 4 */
-
-	enables = in_le32(mv64x60_base + MV64360_CPU_BAR_ENABLE) & 0xf;
-	prot_bits = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		if (!(enables & (1 << i))) {
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][0]);
-			v = ((v & 0xffff) << 16) | (dram_selects[i] << 8);
-			out_le32(mv64x60_base + com2mem_tab[i][0], v);
-
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][1]);
-			v = (v & 0xffff) << 16;
-			out_le32(mv64x60_base + com2mem_tab[i][1], v);
-
-			prot_bits |= (0x3 << (i << 1)); /* r/w access */
-		}
-	}
-
-	out_le32(mv64x60_base + MV64360_MPSC_0_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC_1_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_0, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_1, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_BAR_ENABLE, enables);
-	}
-#endif
-
-	/* MPSC 0/1 Rx & Tx get clocks BRG0/1 */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_RCRR, 0x00000100);
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_TCRR, 0x00000100);
-
-	/* clear pending interrupts */
-	out_le32(mv64x60_base + MV64x60_SDMA_INTR_OFFSET + SDMA_INTR_MASK, 0);
-
-	out_le32(mv64x60_base + SDMA_SCRDP + sdma_base, (int)&rd[chan][0]);
-	out_le32(mv64x60_base + SDMA_SCTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-	out_le32(mv64x60_base + SDMA_SFTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-
-	out_le32(mv64x60_base + SDMA_SDC + sdma_base,
-		SDMA_SDC_RFT | SDMA_SDC_SFM | SDMA_SDC_BLMR | SDMA_SDC_BLMT |
-		(3 << 12));
-
-	cdv = ((mv64x60_mpsc_clk_freq/(32*mv64x60_console_baud))-1);
-	out_le32(mv64x60_base + brg_bcr,
-		((mv64x60_mpsc_clk_src << 18) | (1 << 16) | cdv));
-
-	/* Put MPSC into UART mode, no null modem, 16x clock mode */
-	out_le32(mv64x60_base + MPSC_MMCRL + mpsc_base[chan], 0x000004c4);
-	out_le32(mv64x60_base + MPSC_MMCRH + mpsc_base[chan], 0x04400400);
-
-	out_le32(mv64x60_base + MPSC_CHR_1 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_9 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_10 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_3 + mpsc_base[chan], 4);
-	out_le32(mv64x60_base + MPSC_CHR_4 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_5 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_6 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_7 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_8 + mpsc_base[chan], 0);
-
-	/* 8 data bits, 1 stop bit */
-	out_le32(mv64x60_base + MPSC_MPCR + mpsc_base[chan], (3 << 12));
-	out_le32(mv64x60_base + SDMA_SDCM + sdma_base, SDMA_SDCM_ERD);
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_EH);
-
-	udelay(100);
-
-	return chan;
-}
-
-static void
-stop_dma(int chan)
-{
-	int	i;
-
-	/* Abort MPSC Rx (aborting Tx messes things up) */
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_RA);
-
-	/* Abort SDMA Rx, Tx */
-	out_le32(mv64x60_base + sdma_regs[chan].sdcm,
-		SDMA_SDCM_AR | SDMA_SDCM_STD);
-
-	for (i=0; i<MAX_RESET_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				(SDMA_SDCM_AR | SDMA_SDCM_AT)) == 0)
-			break;
-
-		udelay(100);
-	}
-}
-
-static int
-wait_for_ownership(int chan)
-{
-	int	i;
-
-	for (i=0; i<MAX_TX_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				SDMA_SDCM_TXD) == 0)
-			break;
-
-		udelay(1000);
-	}
-
-	return (i < MAX_TX_WAIT);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	struct mv64x60_tx_desc	*tdp;
-
-	if (wait_for_ownership(com_port) == 0)
-		return;
-
-	tdp = &td[com_port][cur_td[com_port]];
-	if (++cur_td[com_port] >= TX_NUM_DESC)
-		cur_td[com_port] = 0;
-
-	*(unchar *)(tdp->buffer ^ 7) = c;
-	tdp->bytecnt = 1;
-	tdp->shadow = 1;
-	tdp->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |
-		SDMA_DESC_CMDSTAT_O;
-
-	out_le32(mv64x60_base + sdma_regs[com_port].sctdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sftdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sdcm,
-		in_le32(mv64x60_base + sdma_regs[com_port].sdcm) |
-			SDMA_SDCM_TXD);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	unchar			c = '\0';
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	if ((rdp->cmd_stat & (SDMA_DESC_CMDSTAT_O|SDMA_DESC_CMDSTAT_ES)) == 0) {
-		c = *(unchar *)(rdp->buffer ^ 7);
-		RX_INIT_RDP(rdp);
-		if (++cur_rd[com_port] >= RX_NUM_DESC)
-			cur_rd[com_port] = 0;
-	}
-
-	return c;
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	int			loop_count = 0;
-	int			rc = 0;
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	/* Go through rcv descs until empty looking for one with data (no error)*/
-	while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) &&
-		(loop_count++ < RX_NUM_DESC)) {
-
-		/* If there was an error, reinit the desc & continue */
-		if ((rdp->cmd_stat & SDMA_DESC_CMDSTAT_ES) != 0) {
-			RX_INIT_RDP(rdp);
-			if (++cur_rd[com_port] >= RX_NUM_DESC)
-				cur_rd[com_port] = 0;
-			rdp = (struct mv64x60_rx_desc *)rdp->next_desc_ptr;
-		} else {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-void
-serial_close(unsigned long com_port)
-{
-	stop_dma(com_port);
-}
diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
deleted file mode 100644
index 6ff2701598f2..000000000000
--- a/arch/ppc/boot/simple/openbios.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *      2005 (c) SYSGO AG - g.jaeger@sysgo.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-#include <asm/reg.h>
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-#ifdef CONFIG_40x
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-extern unsigned long timebase_period_ns;
-#endif /* CONFIG_40x */
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-typedef struct openbios_board_info {
-        unsigned char    bi_s_version[4];       /* Version of this structure */
-        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
-        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
-#ifdef CONFIG_405EP
-        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */
-#else /* CONFIG_405EP */
-        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */
-#endif /* CONFIG_405EP */
-        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
-        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
-        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
-        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
-#ifdef CONFIG_405EP
-        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
-        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
-#endif /* CONFIG_405EP */
-} openbios_bd_t;
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-#ifdef CONFIG_40x
-	openbios_bd_t *openbios_bd = NULL;
-	openbios_bd_t *(*get_board_info)(void) =
-		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-
-	/*
-	 * On 40x platforms we not only need the MAC-addresses, but also the
-	 * clocks and memsize. Now try to get all values using the OpenBIOS
-	 * "get_board_info()" callback.
-	 */
-	if ((openbios_bd = get_board_info()) != NULL) {
-		/*
-		 * Copy bd_info from OpenBIOS struct into U-Boot struct
-		 * used by kernel
-		 */
-	        hold_residual->bi_memsize = openbios_bd->bi_memsize;
-	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
-	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
-	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
-		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
-#ifdef CONFIG_405EP
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
-		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
-	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
-	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
-#else /* CONFIG_405EP */
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
-#endif /* CONFIG_405EP */
-	} else {
-		/* Hmmm...better try to stuff some defaults.
-		 */
-		hold_residual->bi_memsize = 16 * 1024 * 1024;
-		hold_residual->bi_intfreq = 200000000;
-		hold_residual->bi_busfreq = 100000000;
-		hold_residual->bi_pci_busfreq = 66666666;
-
-		/*
-		 * Only supply one mac-address in this fallback
-		 */
-		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
-#ifdef CONFIG_405EP
-	        hold_residual->bi_opbfreq = 50000000;
-	        hold_residual->bi_procfreq = 200000000;
-#endif /* CONFIG_405EP */
-	}
-
-	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
-#endif /* CONFIG_40x */
-
-#ifdef CONFIG_440GP
-	/* simply copy the MAC addresses */
-	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);
-	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
-#endif /* CONFIG_440GP */
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c
deleted file mode 100644
index b0f673c8b7d9..000000000000
--- a/arch/ppc/boot/simple/pci.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Stand alone funtions for QSpan Tundra support.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-
-/* To map PCI devices, you first write 0xffffffff into the device
- * base address registers.  When the register is read back, the
- * number of most significant '1' bits describes the amount of address
- * space needed for mapping.  If the most significant bit is not set,
- * either the device does not use that address register, or it has
- * a fixed address that we can't change.  After the address is assigned,
- * the command register has to be written to enable the card.
- */
-typedef struct {
-	u_char	pci_bus;
-	u_char	pci_devfn;
-	ushort	pci_command;
-	uint	pci_addrs[6];
-} pci_map_t;
-
-/* We should probably dynamically allocate these structures.
-*/
-#define MAX_PCI_DEVS	32
-int	pci_dev_cnt;
-pci_map_t	pci_map[MAX_PCI_DEVS];
-
-void pci_conf_write(int bus, int device, int func, int reg, uint writeval);
-void pci_conf_read(int bus, int device, int func, int reg, void *readval);
-void probe_addresses(int bus, int devfn);
-void map_pci_addrs(void);
-
-extern int
-qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned char *val);
-extern int
-qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned short *val);
-extern int
-qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned int *val);
-extern int
-qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned char val);
-extern int
-qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned short val);
-extern int
-qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			  unsigned char offset, unsigned int val);
-
-
-/* This is a really stripped version of PCI bus scan.  All we are
- * looking for are devices that exist.
- */
-void
-pci_scanner(int addr_probe)
-{
-	unsigned int devfn, l, class, bus_number;
-	unsigned char hdr_type, is_multi;
-
-	is_multi = 0;
-	bus_number = 0;
-	for (devfn = 0; devfn < 0xff; ++devfn) {
-		/* The device numbers are comprised of upper 5 bits of
-		 * device number and lower 3 bits of multi-function number.
-		 */
-		if ((devfn & 7) && !is_multi) {
-			/* Don't scan multifunction addresses if this is
-			 * not a multifunction device.
-			 */
-			continue;
-		}
-
-		/* Read the header to determine card type.
-		*/
-		qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE,
-								&hdr_type);
-
-		/* If this is a base device number, check the header to
-		 * determine if it is mulifunction.
-		 */
-		if ((devfn & 7) == 0)
-			is_multi = hdr_type & 0x80;
-
-		/* Check to see if the board is really in the slot.
-		*/
-		qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l);
-		/* some broken boards return 0 if a slot is empty: */
-		if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff ||
-							l == 0xffff0000) {
-			/* Nothing there.
-			*/
-			is_multi = 0;
-			continue;
-		}
-
-		/* If we are not performing an address probe,
-		 * just simply print out some information.
-		 */
-		if (!addr_probe) {
-			qs_pci_read_config_dword(bus_number, devfn,
-						PCI_CLASS_REVISION, &class);
-
-			class >>= 8;	    /* upper 3 bytes */
-
-#if 0
-			printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n",
-				(devfn >> 3), (devfn & 7),
-				(l & 0xffff),  (l >> 16) & 0xffff, class);
-#else
-			puts("Found ("); puthex(devfn >> 3);
-			puts(":"); puthex(devfn & 7);
-			puts("): vendor "); puthex(l & 0xffff);
-			puts(", device "); puthex((l >> 16) & 0xffff);
-			puts(", class "); puthex(class); puts("\n");
-#endif
-		}
-		else {
-			/* If this is a "normal" device, build address list.
-			*/
-			if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
-				probe_addresses(bus_number, devfn);
-		}
-	}
-
-	/* Now map the boards.
-	*/
-	if (addr_probe)
-		map_pci_addrs();
-}
-
-/* Probe addresses for the specified device.  This is a destructive
- * operation because it writes the registers.
- */
-void
-probe_addresses(bus, devfn)
-{
-	int	i;
-	uint	pciaddr;
-	ushort	pcicmd;
-	pci_map_t	*pm;
-
-	if (pci_dev_cnt >= MAX_PCI_DEVS) {
-		puts("Too many PCI devices\n");
-		return;
-	}
-
-	pm = &pci_map[pci_dev_cnt++];
-
-	pm->pci_bus = bus;
-	pm->pci_devfn = devfn;
-
-	for (i=0; i<6; i++) {
-		qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1);
-		qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4),
-								&pciaddr);
-		pm->pci_addrs[i] = pciaddr;
-		qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd);
-		pm->pci_command = pcicmd;
-	}
-}
-
-/* Map the cards into the PCI space.  The PCI has separate memory
- * and I/O spaces.  In addition, some memory devices require mapping
- * below 1M.  The least significant 4 bits of the address register
- * provide information.  If this is an I/O device, only the LS bit
- * is used to indicate that, so I/O devices can be mapped to a two byte
- * boundard.  Memory addresses can be mapped to a 32 byte boundary.
- * The QSpan implementations usually have a 1Gbyte space for each
- * memory and I/O spaces.
- *
- * This isn't a terribly fancy algorithm.  I just map the spaces from
- * the top starting with the largest address space.  When finished,
- * the registers are written and the card enabled.
- *
- * While the Tundra can map a large address space on most boards, we
- * need to be careful because it may overlap other devices (like IMMR).
- */
-#define MEMORY_SPACE_SIZE	0x20000000
-#define IO_SPACE_SIZE		0x20000000
-
-void
-map_pci_addrs()
-{
-	uint	pci_mem_top, pci_mem_low;
-	uint	pci_io_top;
-	uint	addr_mask, reg_addr, space;
-	int	i, j;
-	pci_map_t *pm;
-
-	pci_mem_top = MEMORY_SPACE_SIZE;
-	pci_io_top = IO_SPACE_SIZE;
-	pci_mem_low = (1 * 1024 * 1024);	/* Below one meg addresses */
-
-	/* We can't map anything more than the maximum space, but test
-	 * for it anyway to catch devices out of range.
-	 */
-	addr_mask = 0x80000000;
-
-	do {
-		space = (~addr_mask) + 1;	/* Size of the space */
-		for (i=0; i<pci_dev_cnt; i++) {
-			pm = &pci_map[i];
-			for (j=0; j<6; j++) {
-				/* If the MS bit is not set, this has either
-				 * already been mapped, or is not used.
-				 */
-				reg_addr = pm->pci_addrs[j];
-				if ((reg_addr & 0x80000000) == 0)
-					continue;
-				if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) {
-					if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask)
-						continue;
-					if (pci_io_top < space) {
-						puts("Out of PCI I/O space\n");
-					}
-					else {
-						pci_io_top -= space;
-						pm->pci_addrs[j] = pci_io_top;
-						pm->pci_command |= PCI_COMMAND_IO;
-					}
-				}
-				else {
-					if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask)
-						continue;
-
-					/* Memory space.  Test if below 1M.
-					*/
-					if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) {
-						if (pci_mem_low < space) {
-							puts("Out of PCI 1M space\n");
-						}
-						else {
-							pci_mem_low -= space;
-							pm->pci_addrs[j] = pci_mem_low;
-						}
-					}
-					else {
-						if (pci_mem_top < space) {
-							puts("Out of PCI Mem space\n");
-						}
-						else {
-							pci_mem_top -= space;
-							pm->pci_addrs[j] = pci_mem_top;
-						}
-					}
-					pm->pci_command |= PCI_COMMAND_MEMORY;
-				}
-			}
-		}
-		addr_mask >>= 1;
-		addr_mask |= 0x80000000;
-	} while (addr_mask != 0xfffffffe);
-	
-	/* Now, run the list one more time and map everything.
-	*/
-	for (i=0; i<pci_dev_cnt; i++) {
-		pm = &pci_map[i];
-		for (j=0; j<6; j++) {
-			qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn,
-				PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]);
-		}
-
-		/* Enable memory or address mapping.
-		*/
-		qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND,
-			pm->pci_command);
-	}
-}
-
diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c
deleted file mode 100644
index f39d01e0619d..000000000000
--- a/arch/ppc/boot/simple/pibs.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * 2004-2005 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-/* String functions lifted from lib/vsprintf.c and lib/ctype.c */
-unsigned char _ctype[] = {
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 0-7 */
-_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C,		/* 8-15 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 16-23 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 24-31 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,			/* 32-39 */
-_P,_P,_P,_P,_P,_P,_P,_P,			/* 40-47 */
-_D,_D,_D,_D,_D,_D,_D,_D,			/* 48-55 */
-_D,_D,_P,_P,_P,_P,_P,_P,			/* 56-63 */
-_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U,	/* 64-71 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 72-79 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 80-87 */
-_U,_U,_U,_P,_P,_P,_P,_P,			/* 88-95 */
-_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L,	/* 96-103 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 104-111 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 112-119 */
-_L,_L,_L,_P,_P,_P,_P,_C,			/* 120-127 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,   /* 160-175 */
-_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,       /* 176-191 */
-_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,       /* 192-207 */
-_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L,       /* 208-223 */
-_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,       /* 224-239 */
-_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L};      /* 240-255 */
-
-/**
- * simple_strtoull - convert a string to an unsigned long long
- * @cp: The start of the string
- * @endp: A pointer to the end of the parsed string will be placed here
- * @base: The number base to use
- */
-unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long long result = 0,value;
-
-	if (!base) {
-		base = 10;
-		if (*cp == '0') {
-			base = 8;
-			cp++;
-			if ((toupper(*cp) == 'X') && isxdigit(cp[1])) {
-				cp++;
-				base = 16;
-			}
-		}
-	} else if (base == 16) {
-		if (cp[0] == '0' && toupper(cp[1]) == 'X')
-			cp += 2;
-	}
-	while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
-	    ? toupper(*cp) : *cp)-'A'+10) < base) {
-		result = result*base + value;
-		cp++;
-	}
-	if (endp)
-		*endp = (char *)cp;
-	return result;
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	unsigned long long mac64;
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
-	memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
-	memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
-#endif
-#ifdef CONFIG_440GX
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
-	memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
-	memcpy(hold_residual->bi_enet3addr, (char *)&mac64+2, 6);
-#endif
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/prepmap.c b/arch/ppc/boot/simple/prepmap.c
deleted file mode 100644
index c871a4db6e8c..000000000000
--- a/arch/ppc/boot/simple/prepmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0x80000000);
-}
diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c
deleted file mode 100644
index d2966d032a4c..000000000000
--- a/arch/ppc/boot/simple/qspan_pci.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * LinuxPPC arch/ppc/kernel/qspan_pci.c   Dan Malek (dmalek@jlc.net)
- *
- * QSpan Motorola bus to PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-/*
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr))
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-/* Initialize the QSpan device registers after power up.
-*/
-void
-qspan_init(void)
-{
-	uint	*qptr;
-
-
-
-	qptr = (uint *)PCI_CSR_ADDR;
-
-	/* PCI Configuration/status.  Upper bits written to clear
-	 * pending interrupt or status.  Lower bits enable QSPAN as
-	 * PCI master, enable memory and I/O cycles, and enable PCI
-	 * parity error checking.
-	 * IMPORTANT:  The last two bits of this word enable PCI
-	 * master cycles into the QBus.  The QSpan is broken and can't
-	 * meet the timing specs of the PQ bus for this to work.  Therefore,
-	 * if you don't have external bus arbitration, you can't use
-	 * this function.
-	 */
-#ifdef EXTERNAL_PQ_ARB
-	qptr[1] = 0xf9000147;
-#else
-	qptr[1] = 0xf9000144;
-#endif
-
-	/* PCI Misc configuration.  Set PCI latency timer resolution
-	 * of 8 cycles, set cache size to 4 x 32.
-	 */
-	qptr[3] = 0;
-
-	/* Set up PCI Target address mapping.  Enable, Posted writes,
-	 * 2Gbyte space (processor memory controller determines actual size).
-	 */
-	qptr[64] = 0x8f000080;
-
-	/* Map processor 0x80000000 to PCI 0x00000000.
-	 * Processor address bit 1 determines I/O type access (0x80000000)
-	 * or memory type access (0xc0000000).
-	 */
-	qptr[65] = 0x80000000;
-
-	/* Enable error logging and clear any pending error status.
-	*/
-	qptr[80] = 0x90000000;
-
-	qptr[512] = 0x000c0003;
-
-	/* Set up Qbus slave image.
-	*/
-	qptr[960] = 0x01000000;
-	qptr[961] = 0x000000d1;
-	qptr[964] = 0x00000000;
-	qptr[965] = 0x000000d1;
-
-}
-
-/* Functions to support PCI bios-like features to read/write configuration
- * space.  If the function fails for any reason, a -1 (0xffffffff) value
- * must be returned.
- */
-#define DEVICE_NOT_FOUND	(-1)
-#define SUCCESSFUL		0
-
-int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return DEVICE_NOT_FOUND;
-	}
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(*val, QS_CONFIG_DATA, "lwz");
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-	return SUCCESSFUL;
-}
-
diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
deleted file mode 100644
index 1bbbcd2f2bcb..000000000000
--- a/arch/ppc/boot/simple/relocate.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This is the common part of the loader relocation and initialization
- * process.  All of the board/processor specific initialization is
- * done before we get here.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-#define GETSYM(reg, sym)	\
-	lis	reg, sym@h; ori	reg, reg, sym@l
-
-	.text
-	/* We get called from the early initialization code.
-	 * Register 3 has the address where we were loaded,
-	 * Register 4 contains any residual data passed from the
-	 * boot rom.
-	 */
-	.globl	relocate
-relocate:
-	/* Save r3, r4 for later.
-	 * The r8/r11 are legacy registers so I don't have to
-	 * rewrite the code below :-).
-	 */
-	mr	r8, r3
-	mr	r11, r4
-
-	/* compute the size of the whole image in words. */
-	GETSYM(r4,start)
-	GETSYM(r5,end)
-
-	addi	r5,r5,3		/* round up */
-	sub	r5,r5,r4	/* end - start */
-	srwi	r5,r5,2
-	mr	r7,r5		/* Save for later use. */
-
-	/*
-	 * Check if we need to relocate ourselves to the link addr or were
-	 * we loaded there to begin with.
-	 */
-	cmpw	cr0,r3,r4
-	beq	start_ldr	/* If 0, we don't need to relocate */
-
-	/* Move this code somewhere safe.  This is max(load + size, end)
-	 * r8 == load address
-	 */
-	GETSYM(r4, start)
-	GETSYM(r5, end)
-
-	sub	r6,r5,r4
-	add	r6,r8,r6	/* r6 == phys(load + size) */
-
-	cmpw	r5,r6
-	bgt	1f
-	b	2f
-1:
-	mr	r6, r5
-2:
-	/* dest is in r6 */
-	/* Ensure alignment --- this code is precautionary */
-	addi	r6,r6,4
-	li	r5,0x0003
-	andc	r6,r6,r5
-
-	/* Find physical address and size of do_relocate */
-	GETSYM(r5, __relocate_start)
-	GETSYM(r4, __relocate_end)
-	GETSYM(r3, start)
-
-	/* Size to copy */
-	sub	r4,r4,r5
-	srwi	r4,r4,2
-
-	/* Src addr to copy (= __relocate_start - start + where_loaded) */
-	sub	r3,r5,r3
-	add	r5,r8,r3
-
-	/* Save dest */
-	mr	r3, r6
-
-	/* Do the copy */
-	mtctr	r4
-3:	lwz	r4,0(r5)
-	stw	r4,0(r3)
-	addi	r3,r3,4
-	addi	r5,r5,4
-	bdnz	3b
-
-	GETSYM(r4, __relocate_start)
-	GETSYM(r5, do_relocate)
-
-	sub	r4,r5,r4	/* Get entry point for do_relocate in */
-	add	r6,r6,r4	/* relocated section */
-
-	/* This will return to the relocated do_relocate */
-	mtlr	r6
-	b	flush_instruction_cache
-
-	.section ".relocate_code","xa"
-	
-do_relocate:
-	/* We have 2 cases --- start < load, or start > load
-	 * This determines whether we copy from the end, or the start.
-	 * Its easier to have 2 loops than to have paramaterised
-	 * loops.  Sigh.
-	 */
-	li	r6,0		/* Clear checksum */
-	mtctr	r7		/* Setup for a loop */
-	
-	GETSYM(r4, start)
-	mr	r3,r8		/* Get the load addr */
-
-	cmpw	cr0,r4,r3	/* If we need to copy from the end, do so */
-	bgt	do_relocate_from_end
-
-do_relocate_from_start:
-1:	lwz	r5,0(r3)	/* Load and decrement */
-	stw	r5,0(r4)	/* Store and decrement */
-	addi	r3,r3,4
-	addi	r4,r4,4
-	xor	r6,r6,r5	/* Update checksum */
-	bdnz	1b		/* Are we done? */
-	b	do_relocate_out	/* Finished */
-
-do_relocate_from_end:
-	GETSYM(r3, end)
-	slwi	r4,r7,2
-	add	r4,r8,r4	/* Get the physical end */
-1:	lwzu	r5,-4(r4)
-	stwu	r5, -4(r3)
-	xor	r6,r6,r5
-	bdnz	1b
-
-do_relocate_out:
-	GETSYM(r3,start_ldr)
-	mtlr	r3		/* Easiest way to do an absolute jump */
-/* Some boards don't boot up with the I-cache enabled.  Do that
- * now because the decompress runs much faster that way.
- * As a side effect, we have to ensure the data cache is not enabled
- * so we can access the serial I/O without trouble.
- */
-	b	flush_instruction_cache
-
-	.previous
-
-start_ldr:
-/* Clear all of BSS and set up stack for C calls */
-	lis	r3,__bss_start@h
-	ori	r3,r3,__bss_start@l
-	lis	r4,end@h
-	ori	r4,r4,end@l
-	subi	r3,r3,4
-	subi	r4,r4,4
-	li	r0,0
-50:	stwu	r0,4(r3)
-	cmpw	cr0,r3,r4
-	blt	50b
-90:	mr	r9,r1		/* Save old stack pointer (in case it matters) */
-	lis	r1,.stack@h
-	ori	r1,r1,.stack@l
-	addi	r1,r1,4096*2
-	subi	r1,r1,256
-	li	r2,0x000F	/* Mask pointer to 16-byte boundary */
-	andc	r1,r1,r2
-
-	/*
-	 * Exec kernel loader
-	 */
-	mr	r3,r8		/* Load point */
-	mr	r4,r7		/* Program length */
-	mr	r5,r6		/* Checksum */
-	mr	r6,r11		/* Residual data */
-	mr	r7,r25		/* Validated OFW interface */
-	bl	load_kernel
-
-	/*
-	 * Make sure the kernel knows we don't have things set in
-	 * registers.  -- Tom
-	 */
-	li	r4,0
-	li	r5,0
-	li	r6,0
-
-	/*
-	 * Start at the begining.
-	 */
-#ifdef CONFIG_PPC_PREP
-	li	r9,0xc
-	mtlr	r9
-	/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
-	 * and tell the kernel to start on the 4th instruction since we
-	 * overwrite the first 3 sometimes (which are 'nop').
-	 */
-	lis	r10,0xdeadc0de@h
-	ori	r10,r10,0xdeadc0de@l
-	li	r9,0
-	stw	r10,0(r9)
-#else
-	li	r9,0
-	mtlr	r9
-#endif
-	blr
-
-	.comm	.stack,4096*2,4
diff --git a/arch/ppc/boot/simple/rw4/ppc_40x.h b/arch/ppc/boot/simple/rw4/ppc_40x.h
deleted file mode 100644
index 561fb26f5a93..000000000000
--- a/arch/ppc/boot/simple/rw4/ppc_40x.h
+++ /dev/null
@@ -1,664 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: Assembler include file.
-| File:      ppc_40x.h
-| Purpose:   Include file containing PPC DCR defines.
-|
-| Changes:
-| Date       Author  Comment
-| ---------  ------  --------------------------------------------------------
-| 01-Mar-00  tjc     Created
-+----------------------------------------------------------------------------*/
-/* added by linguohui*/
-#define MW
-/*----------------------------------------------------------------------------+
-| PPC Special purpose registers Numbers
-+----------------------------------------------------------------------------*/
-#define ccr0            0x3b3               /* core configuration reg        */
-#define ctr             0x009               /* count register                */
-#define ctrreg          0x009               /* count register                */
-#define dbcr0           0x3f2               /* debug control register 0      */
-#define dbcr1           0x3bd               /* debug control register 1      */
-#define dbsr            0x3f0               /* debug status register         */
-#define dccr            0x3fa               /* data cache control reg.       */
-#define dcwr            0x3ba               /* data cache write-thru reg     */
-#define dear            0x3d5               /* data exception address reg    */
-#define esr             0x3d4               /* exception syndrome register   */
-#define evpr            0x3d6               /* exception vector prefix reg   */
-#define iccr            0x3fb               /* instruction cache cntrl re    */
-#define icdbdr          0x3d3               /* instr cache dbug data reg     */
-#define lrreg           0x008               /* link register                 */
-#define pid             0x3b1               /* process id reg                */
-#define pit             0x3db               /* programmable interval time    */
-#define pvr             0x11f               /* processor version register    */
-#define sgr             0x3b9               /* storage guarded reg           */
-#define sler            0x3bb               /* storage little endian reg     */
-#define sprg0           0x110               /* special general purpose 0     */
-#define sprg1           0x111               /* special general purpose 1     */
-#define sprg2           0x112               /* special general purpose 2     */
-#define sprg3           0x113               /* special general purpose 3     */
-#define sprg4           0x114               /* special general purpose 4     */
-#define sprg5           0x115               /* special general purpose 5     */
-#define sprg6           0x116               /* special general purpose 6     */
-#define sprg7           0x117               /* special general purpose 7     */
-#define srr0            0x01a               /* save/restore register 0       */
-#define srr1            0x01b               /* save/restore register 1       */
-#define srr2            0x3de               /* save/restore register 2       */
-#define srr3            0x3df               /* save/restore register 3       */
-#define tbhi            0x11D
-#define tblo            0x11C
-#define tcr             0x3da               /* timer control register        */
-#define tsr             0x3d8               /* timer status register         */
-#define xerreg          0x001               /* fixed point exception         */
-#define xer             0x001               /* fixed point exception         */
-#define zpr             0x3b0               /* zone protection reg           */
-
-/*----------------------------------------------------------------------------+
-| Decompression Controller
-+----------------------------------------------------------------------------*/
-#define kiar            0x014               /* Decompression cntl addr reg   */
-#define kidr            0x015               /* Decompression cntl data reg   */
-#define kitor0          0x00                /* index table origin Reg 0      */
-#define kitor1          0x01                /* index table origin Reg 1      */
-#define kitor2          0x02                /* index table origin Reg 2      */
-#define kitor3          0x03                /* index table origin Reg 3      */
-#define kaddr0          0x04                /* addr decode Definition Reg 0  */
-#define kaddr1          0x05                /* addr decode Definition Reg 1  */
-#define kconf           0x40                /* Decompression cntl config reg */
-#define kid             0x41                /* Decompression cntl id reg     */
-#define kver            0x42                /* Decompression cntl ver number */
-#define kpear           0x50                /* bus error addr reg (PLB)      */
-#define kbear           0x51                /* bus error addr reg (DCP-EBC)  */
-#define kesr0           0x52                /* bus error status reg 0        */
-
-/*----------------------------------------------------------------------------+
-| Romeo Specific Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-#ifndef VESTA
-#define cdbcr           0x3d7                   /* cache debug cntrl reg     */
-
-#define a_latcnt        0x1a9                   /* PLB Latency count         */
-#define a_tgval         0x1ac                   /* tone generation value     */
-#define a_plb_pr        0x1bf                   /* PLB priority              */
-
-#define cic_sel1        0x031                   /* select register 1         */
-#define cic_sel2        0x032                   /* select register 2         */
-
-#define clkgcrst        0x122                   /* chip reset register */
-
-#define cp_cpmsr        0x100                   /*rstatus register           */
-#define cp_cpmer        0x101                   /* enable register           */
-
-#define dcp_kiar        0x190                   /* indirect address register */
-#define dcp_kidr        0x191                   /* indirect data register    */
-
-#define hsmc_mcgr       0x1c0                   /* HSMC global register      */
-#define hsmc_mcbesr     0x1c1                   /* bus error status register */
-#define hsmc_mcbear     0x1c2                   /* bus error address register*/
-#define hsmc_mcbr0      0x1c4                   /* SDRAM sub-ctrl bank reg 0 */
-#define hsmc_mccr0      0x1c5                   /* SDRAM sub-ctrl ctrl reg 0 */
-#define hsmc_mcbr1      0x1c7                   /* SDRAM sub-ctrl bank reg 1 */
-#define hsmc_mccr1      0x1c8                   /* SDRAM sub-ctrl ctrl reg 1 */
-#define hsmc_sysr       0x1d1                   /* system register           */
-#define hsmc_data       0x1d2                   /* data register             */
-#define hsmc_mccrr      0x1d3                   /* refresh register          */
-
-#define ocm_pbar        0x1E0                   /* base address register     */
-
-#define plb0_pacr0      0x057                   /* PLB arbiter control reg   */
-#define plb1_pacr1      0x067                   /* PLB arbiter control reg   */
-
-#define v_displb        0x157                   /* set left border of display*/
-#define v_disptb        0x158                   /* top border of display     */
-#define v_osd_la        0x159                   /* first link address for OSD*/
-#define v_ptsdlta       0x15E                   /* PTS delta register        */
-#define v_v0base        0x16C                   /* base mem add for VBI-0    */
-#define v_v1base        0x16D                   /* base mem add for VBI-1    */
-#define v_osbase        0x16E                   /* base mem add for OSD data */
-#endif
-
-/*----------------------------------------------------------------------------+
-| Vesta Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Cross bar switch.
-+----------------------------------------------------------------------------*/
-#define cbs0_cr         0x010               /* CBS configuration register    */
-
-/*----------------------------------------------------------------------------+
-| DCR external master (DCRX).
-+----------------------------------------------------------------------------*/
-#define dcrx0_icr       0x020               /* internal control register     */
-#define dcrx0_isr       0x021               /* internal status register      */
-#define dcrx0_ecr       0x022               /* external control register     */
-#define dcrx0_esr       0x023               /* external status register      */
-#define dcrx0_tar       0x024               /* target address register       */
-#define dcrx0_tdr       0x025               /* target data register          */
-#define dcrx0_igr       0x026               /* interrupt generation register */
-#define dcrx0_bcr       0x027               /* buffer control register       */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define cic0_cr         0x030               /* CIC control register          */
-#define cic0_vcr        0x033               /* video macro control reg       */
-#define cic0_sel3       0x035               /* select register 3             */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define sgpo0_sgpO      0x036               /* simplified GPIO output        */
-#define sgpo0_gpod      0x037               /* simplified GPIO open drain    */
-#define sgpo0_gptc      0x038               /* simplified GPIO tristate cntl */
-#define sgpo0_gpi       0x039               /* simplified GPIO input         */
-
-/*----------------------------------------------------------------------------+
-| Universal interrupt controller.
-+----------------------------------------------------------------------------*/
-#define uic0_sr         0x040               /* status register               */
-#define uic0_srs        0x041               /* status register set           */
-#define uic0_er         0x042               /* enable register               */
-#define uic0_cr         0x043               /* critical register             */
-#define uic0_pr         0x044               /* parity register               */
-#define uic0_tr         0x045               /* triggering register           */
-#define uic0_msr        0x046               /* masked status register        */
-#define uic0_vr         0x047               /* vector register               */
-#define uic0_vcr        0x048               /* enable config register        */
-
-/*----------------------------------------------------------------------------+
-| PLB 0 and 1.
-+----------------------------------------------------------------------------*/
-#define pb0_pesr        0x054               /* PLB error status reg 0        */
-#define pb0_pesrs       0x055               /* PLB error status reg 0 set    */
-#define pb0_pear        0x056               /* PLB error address reg         */
-
-#define pb1_pesr        0x064               /* PLB error status reg 1        */
-#define pb1_pesrs       0x065               /* PLB error status reg 1 set    */
-#define pb1_pear        0x066               /* PLB error address reg         */
-
-/*----------------------------------------------------------------------------+
-| EBIU DCR registers.
-+----------------------------------------------------------------------------*/
-#define ebiu0_brcrh0    0x070               /* bus region register 0 high    */
-#define ebiu0_brcrh1    0x071               /* bus region register 1 high    */
-#define ebiu0_brcrh2    0x072               /* bus region register 2 high    */
-#define ebiu0_brcrh3    0x073               /* bus region register 3 high    */
-#define ebiu0_brcrh4    0x074               /* bus region register 4 high    */
-#define ebiu0_brcrh5    0x075               /* bus region register 5 high    */
-#define ebiu0_brcrh6    0x076               /* bus region register 6 high    */
-#define ebiu0_brcrh7    0x077               /* bus region register 7 high    */
-#define ebiu0_brcr0     0x080               /* bus region register 0         */
-#define ebiu0_brcr1     0x081               /* bus region register 1         */
-#define ebiu0_brcr2     0x082               /* bus region register 2         */
-#define ebiu0_brcr3     0x083               /* bus region register 3         */
-#define ebiu0_brcr4     0x084               /* bus region register 4         */
-#define ebiu0_brcr5     0x085               /* bus region register 5         */
-#define ebiu0_brcr6     0x086               /* bus region register 6         */
-#define ebiu0_brcr7     0x087               /* bus region register 7         */
-#define ebiu0_bear      0x090               /* bus error address register    */
-#define ebiu0_besr      0x091               /* bus error syndrome reg        */
-#define ebiu0_besr0s    0x093               /* bus error syndrome reg        */
-#define ebiu0_biucr     0x09a               /* bus interface control reg     */
-
-/*----------------------------------------------------------------------------+
-| OPB bridge.
-+----------------------------------------------------------------------------*/
-#define opbw0_gesr      0x0b0               /* error status reg              */
-#define opbw0_gesrs     0x0b1               /* error status reg              */
-#define opbw0_gear      0x0b2               /* error address reg             */
-
-/*----------------------------------------------------------------------------+
-| DMA.
-+----------------------------------------------------------------------------*/
-#define dma0_cr0        0x0c0               /* DMA channel control reg 0     */
-#define dma0_ct0        0x0c1               /* DMA count register 0          */
-#define dma0_da0        0x0c2               /* DMA destination addr reg 0    */
-#define dma0_sa0        0x0c3               /* DMA source addr register 0    */
-#define dma0_cc0        0x0c4               /* DMA chained count 0           */
-#define dma0_cr1        0x0c8               /* DMA channel control reg 1     */
-#define dma0_ct1        0x0c9               /* DMA count register 1          */
-#define dma0_da1        0x0ca               /* DMA destination addr reg 1    */
-#define dma0_sa1        0x0cb               /* DMA source addr register 1    */
-#define dma0_cc1        0x0cc               /* DMA chained count 1           */
-#define dma0_cr2        0x0d0               /* DMA channel control reg 2     */
-#define dma0_ct2        0x0d1               /* DMA count register 2          */
-#define dma0_da2        0x0d2               /* DMA destination addr reg 2    */
-#define dma0_sa2        0x0d3               /* DMA source addr register 2    */
-#define dma0_cc2        0x0d4               /* DMA chained count 2           */
-#define dma0_cr3        0x0d8               /* DMA channel control reg 3     */
-#define dma0_ct3        0x0d9               /* DMA count register 3          */
-#define dma0_da3        0x0da               /* DMA destination addr reg 3    */
-#define dma0_sa3        0x0db               /* DMA source addr register 3    */
-#define dma0_cc3        0x0dc               /* DMA chained count 3           */
-#define dma0_sr         0x0e0               /* DMA status register           */
-#define dma0_srs        0x0e1               /* DMA status register           */
-#define dma0_s1         0x031               /* DMA select1 register          */
-#define dma0_s2         0x032               /* DMA select2 register          */
-
-/*---------------------------------------------------------------------------+
-| Clock and power management.
-+----------------------------------------------------------------------------*/
-#define cpm0_fr         0x102               /* force register                */
-
-/*----------------------------------------------------------------------------+
-| Serial Clock Control.
-+----------------------------------------------------------------------------*/
-#define ser0_ccr        0x120               /* serial clock control register */
-
-/*----------------------------------------------------------------------------+
-| Audio Clock Control.
-+----------------------------------------------------------------------------*/
-#define aud0_apcr       0x121               /* audio clock ctrl register     */
-
-/*----------------------------------------------------------------------------+
-| DENC.
-+----------------------------------------------------------------------------*/
-#define denc0_idr       0x130               /* DENC ID register              */
-#define denc0_cr1       0x131               /* control register 1            */
-#define denc0_rr1       0x132               /* microvision 1 (reserved 1)    */
-#define denc0_cr2       0x133               /* control register 2            */
-#define denc0_rr2       0x134               /* microvision 2 (reserved 2)    */
-#define denc0_rr3       0x135               /* microvision 3 (reserved 3)    */
-#define denc0_rr4       0x136               /* microvision 4 (reserved 4)    */
-#define denc0_rr5       0x137               /* microvision 5 (reserved 5)    */
-#define denc0_ccdr      0x138               /* closed caption data           */
-#define denc0_cccr      0x139               /* closed caption control        */
-#define denc0_trr       0x13A               /* teletext request register     */
-#define denc0_tosr      0x13B               /* teletext odd field line se    */
-#define denc0_tesr      0x13C               /* teletext even field line s    */
-#define denc0_rlsr      0x13D               /* RGB rhift left register       */
-#define denc0_vlsr      0x13E               /* video level shift register    */
-#define denc0_vsr       0x13F               /* video scaling register        */
-
-/*----------------------------------------------------------------------------+
-| Video decoder.  Suspect 0x179, 0x169, 0x16a, 0x152 (rc).
-+----------------------------------------------------------------------------*/
-#define vid0_ccntl      0x140               /* control decoder operation     */
-#define vid0_cmode      0x141               /* video operational mode        */
-#define vid0_sstc0      0x142               /* STC high order bits 31:0      */
-#define vid0_sstc1      0x143               /* STC low order bit 32          */
-#define vid0_spts0      0x144               /* PTS high order bits 31:0      */
-#define vid0_spts1      0x145               /* PTS low order bit 32          */
-#define vid0_fifo       0x146               /* FIFO data port                */
-#define vid0_fifos      0x147               /* FIFO status                   */
-#define vid0_cmd        0x148               /* send command to decoder       */
-#define vid0_cmdd       0x149               /* port for command params       */
-#define vid0_cmdst      0x14A               /* command status                */
-#define vid0_cmdad      0x14B               /* command address               */
-#define vid0_procia     0x14C               /* instruction store             */
-#define vid0_procid     0x14D               /* data port for I_Store         */
-#define vid0_osdm       0x151               /* OSD mode control              */
-#define vid0_hosti      0x152               /* base interrupt register       */
-#define vid0_mask       0x153               /* interrupt mask register       */
-#define vid0_dispm      0x154               /* operational mode for Disp     */
-#define vid0_dispd      0x155               /* setting for 'Sync' delay      */
-#define vid0_vbctl      0x156               /* VBI                           */
-#define vid0_ttxctl     0x157               /* teletext control              */
-#define vid0_disptb     0x158               /* display left/top border       */
-#define vid0_osdgla     0x159               /* Graphics plane link addr      */
-#define vid0_osdila     0x15A               /* Image plane link addr         */
-#define vid0_rbthr      0x15B               /* rate buffer threshold         */
-#define vid0_osdcla     0x15C               /* Cursor link addr              */
-#define vid0_stcca      0x15D               /* STC common address            */
-#define vid0_ptsctl     0x15F               /* PTS Control                   */
-#define vid0_wprot      0x165               /* write protect for I_Store     */
-#define vid0_vcqa       0x167               /* video clip queued block Ad    */
-#define vid0_vcql       0x168               /* video clip queued block Le    */
-#define vid0_blksz      0x169               /* block size bytes for copy op  */
-#define vid0_srcad      0x16a               /* copy source address bits 6-31 */
-#define vid0_udbas      0x16B               /* base mem add for user data    */
-#define vid0_vbibas     0x16C               /* base mem add for VBI 0/1      */
-#define vid0_osdibas    0x16D               /* Image plane base address      */
-#define vid0_osdgbas    0x16E               /* Graphic plane base address    */
-#define vid0_rbbase     0x16F               /* base mem add for video buf    */
-#define vid0_dramad     0x170               /* DRAM address                  */
-#define vid0_dramdt     0x171               /* data port for DRAM access     */
-#define vid0_dramcs     0x172               /* DRAM command and statusa      */
-#define vid0_vcwa       0x173               /* v clip work address           */
-#define vid0_vcwl       0x174               /* v clip work length            */
-#define vid0_mseg0      0x175               /* segment address 0             */
-#define vid0_mseg1      0x176               /* segment address 1             */
-#define vid0_mseg2      0x177               /* segment address 2             */
-#define vid0_mseg3      0x178               /* segment address 3             */
-#define vid0_fbbase     0x179               /* frame buffer base memory      */
-#define vid0_osdcbas    0x17A               /* Cursor base addr              */
-#define vid0_lboxtb     0x17B               /* top left border               */
-#define vid0_trdly      0x17C               /* transparency gate delay       */
-#define vid0_sbord      0x17D               /* left/top small pict. bord.    */
-#define vid0_zoffs      0x17E               /* hor/ver zoom window           */
-#define vid0_rbsz       0x17F               /* rate buffer size read         */
-
-/*----------------------------------------------------------------------------+
-| Transport demultiplexer.
-+----------------------------------------------------------------------------*/
-#define xpt0_lr         0x180               /* demux location register       */
-#define xpt0_data       0x181               /* demux data register           */
-#define xpt0_ir         0x182               /* demux interrupt register      */
-
-#define xpt0_config1    0x0000              /* configuration 1               */
-#define xpt0_control1   0x0001              /* control 1                     */
-#define xpt0_festat     0x0002              /* Front-end status              */
-#define xpt0_feimask    0x0003              /* Front_end interrupt Mask      */
-#define xpt0_ocmcnfg    0x0004              /* OCM Address                   */
-#define xpt0_settapi    0x0005              /* Set TAP Interrupt             */
-
-#define xpt0_pcrhi      0x0010              /* PCR High                      */
-#define xpt0_pcrlow     0x0011              /* PCR Low                       */
-#define xpt0_lstchi     0x0012              /* Latched STC High              */
-#define xpt0_lstclow    0x0013              /* Latched STC Low               */
-#define xpt0_stchi      0x0014              /* STC High                      */
-#define xpt0_stclow     0x0015              /* STC Low                       */
-#define xpt0_pwm        0x0016              /* PWM                           */
-#define xpt0_pcrstct    0x0017              /* PCR-STC Threshold             */
-#define xpt0_pcrstcd    0x0018              /* PCR-STC Delta                 */
-#define xpt0_stccomp    0x0019              /* STC Compare                   */
-#define xpt0_stccmpd    0x001a              /* STC Compare Disarm            */
-
-#define xpt0_dsstat     0x0048              /* Descrambler Status            */
-#define xpt0_dsimask    0x0049              /* Descrambler Interrupt Mask    */
-
-#define xpt0_vcchng     0x01f0              /* Video Channel Change          */
-#define xpt0_acchng     0x01f1              /* Audio Channel Change          */
-#define xpt0_axenable   0x01fe              /* Aux PID Enables               */
-#define xpt0_pcrpid     0x01ff              /* PCR PID                       */
-
-#define xpt0_config2    0x1000              /* Configuration 2               */
-#define xpt0_pbuflvl    0x1002              /* Packet Buffer Level           */
-#define xpt0_intmask    0x1003              /* Interrupt Mask                */
-#define xpt0_plbcnfg    0x1004              /* PLB Configuration             */
-
-#define xpt0_qint       0x1010              /* Queues Interrupts             */
-#define xpt0_qintmsk    0x1011              /* Queues Interrupts Mask        */
-#define xpt0_astatus    0x1012              /* Audio Status                  */
-#define xpt0_aintmask   0x1013              /* Audio Interrupt Mask          */
-#define xpt0_vstatus    0x1014              /* Video Status                  */
-#define xpt0_vintmask   0x1015              /* Video Interrupt Mask          */
-
-#define xpt0_qbase      0x1020              /* Queue Base                    */
-#define xpt0_bucketq    0x1021              /* Bucket Queue                  */
-#define xpt0_qstops     0x1024              /* Queue Stops                   */
-#define xpt0_qresets    0x1025              /* Queue Resets                  */
-#define xpt0_sfchng     0x1026              /* Section Filter Change         */
-
-/*----------------------------------------------------------------------------+
-| Audio decoder. Suspect 0x1ad, 0x1b4, 0x1a3, 0x1a5 (read/write status)
-+----------------------------------------------------------------------------*/
-#define aud0_ctrl0      0x1a0               /* control 0                     */
-#define aud0_ctrl1      0x1a1               /* control 1                     */
-#define aud0_ctrl2      0x1a2               /* control 2                     */
-#define aud0_cmd        0x1a3               /* command register              */
-#define aud0_isr        0x1a4               /* interrupt status register     */
-#define aud0_imr        0x1a5               /* interrupt mask register       */
-#define aud0_dsr        0x1a6               /* decoder status register       */
-#define aud0_stc        0x1a7               /* system time clock             */
-#define aud0_csr        0x1a8               /* channel status register       */
-#define aud0_lcnt       0x1a9               /* queued address register 2     */
-#define aud0_pts        0x1aa               /* presentation time stamp       */
-#define aud0_tgctrl     0x1ab               /* tone generation control       */
-#define aud0_qlr2       0x1ac               /* queued length register 2      */
-#define aud0_auxd       0x1ad               /* aux data                      */
-#define aud0_strmid     0x1ae               /* stream ID                     */
-#define aud0_qar        0x1af               /* queued address register       */
-#define aud0_dsps       0x1b0               /* DSP status                    */
-#define aud0_qlr        0x1b1               /* queued len address            */
-#define aud0_dspc       0x1b2               /* DSP control                   */
-#define aud0_wlr2       0x1b3               /* working length register 2     */
-#define aud0_instd      0x1b4               /* instruction download          */
-#define aud0_war        0x1b5               /* working address register      */
-#define aud0_seg1       0x1b6               /* segment 1 base register       */
-#define aud0_seg2       0x1b7               /* segment 2 base register       */
-#define aud0_avf        0x1b9               /* audio att value front         */
-#define aud0_avr        0x1ba               /* audio att value rear          */
-#define aud0_avc        0x1bb               /* audio att value center        */
-#define aud0_seg3       0x1bc               /* segment 3 base register       */
-#define aud0_offset     0x1bd               /* offset address                */
-#define aud0_wrl        0x1be               /* working length register       */
-#define aud0_war2       0x1bf               /* working address register 2    */
-
-/*----------------------------------------------------------------------------+
-| High speed memory controller 0 and 1.
-+----------------------------------------------------------------------------*/
-#define hsmc0_gr        0x1e0               /* HSMC global register          */
-#define hsmc0_besr      0x1e1               /* bus error status register     */
-#define hsmc0_bear      0x1e2               /* bus error address register    */
-#define hsmc0_br0       0x1e4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc0_cr0       0x1e5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc0_br1       0x1e7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc0_cr1       0x1e8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc0_sysr      0x1f1               /* system register               */
-#define hsmc0_data      0x1f2               /* data register                 */
-#define hsmc0_crr       0x1f3               /* refresh register              */
-
-#define hsmc1_gr        0x1c0               /* HSMC global register          */
-#define hsmc1_besr      0x1c1               /* bus error status register     */
-#define hsmc1_bear      0x1c2               /* bus error address register    */
-#define hsmc1_br0       0x1c4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc1_cr0       0x1c5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc1_br1       0x1c7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc1_cr1       0x1c8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc1_sysr      0x1d1               /* system register               */
-#define hsmc1_data      0x1d2               /* data register                 */
-#define hsmc1_crr       0x1d3               /* refresh register              */
-
-/*----------------------------------------------------------------------------+
-| Machine State Register bit definitions.
-+----------------------------------------------------------------------------*/
-#define msr_ape         0x00100000
-#define msr_apa         0x00080000
-#define msr_we          0x00040000
-#define msr_ce          0x00020000
-#define msr_ile         0x00010000
-#define msr_ee          0x00008000
-#define msr_pr          0x00004000
-#define msr_me          0x00001000
-#define msr_de          0x00000200
-#define msr_ir          0x00000020
-#define msr_dr          0x00000010
-#define msr_le          0x00000001
-
-/*----------------------------------------------------------------------------+
-| Used during interrupt processing.
-+----------------------------------------------------------------------------*/
-#define stack_reg_image_size            160
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Metaware (EABI) defines.
-+----------------------------------------------------------------------------*/
-#ifdef MW
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other DIAB (Elf) defines.
-+----------------------------------------------------------------------------*/
-#ifdef ELF_DIAB
-
-fprolog:        macro   f_name
-                .text
-                .align  2
-                .globl  f_name
-f_name:
-                endm
-
-fepilog:        macro   f_name
-                .type   f_name,@function
-                .size   f_name,.-f_name
-                endm
-
-#define function_prolog(func_name)      fprolog func_name
-#define function_epilog(func_name)      fepilog func_name
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Xlc (XCOFF) defines.
-+----------------------------------------------------------------------------*/
-#ifdef XCOFF
-
-.machine "403ga"
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .csect .func_name[PR]; \
-                                        .globl .func_name[PR]; \
-                                        func_name:
-
-#define function_epilog(func_name)      .toc; \
-                                        .csect  func_name[DS]; \
-                                        .globl  func_name[DS]; \
-                                        .long   .func_name[PR]; \
-                                        .long   TOC[tc0]
-
-#define function_call(func_name)        .extern .func_name[PR]; \
-                                        stw     r2,stack_frame_toc(r1); \
-                                        mfspr   r2,sprg0; \
-                                        bl      .func_name[PR]; \
-                                        lwz     r2,stack_frame_toc(r1)
-
-#define stack_frame_min                 56
-#define stack_frame_bc                  0
-#define stack_frame_lr                  8
-#define stack_frame_toc                 20
-#define stack_neg_off                   276
-
-#endif
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition for GNU
-+----------------------------------------------------------------------------*/
-#ifdef _GNU_TOOL
-
-#define function_prolog(func_name)      .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)
-
-#endif
diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S
deleted file mode 100644
index b1061962e46b..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init.S
+++ /dev/null
@@ -1,78 +0,0 @@
-#define VESTA
-#include "ppc_40x.h"
-#
-        .align 2
-        .text
-#
-# added by linguohui
-        .extern   initb_ebiu0, initb_config, hdw_init_finish
-        .extern   initb_hsmc0, initb_hsmc1, initb_cache
-# end added
-       .globl    HdwInit
-#
-HdwInit:
-#
-#-----------------------------------------------------------------------*
-# If we are not executing from the FLASH get out                        *
-#-----------------------------------------------------------------------*
-# SAW keep this or comment out a la Hawthorne?
-# r3 contains NIP when used with Linux
-#        rlwinm r28, r3, 8, 24, 31    # if MSB == 0xFF -> FLASH address
-#        cmpwi  r28, 0xff
-#        bne    locn01
-#
-#
-#------------------------------------------------------------------------
-# Init_cpu. Bank registers are setup for the IBM STB.
-#------------------------------------------------------------------------
-#
-# Setup processor core clock to be driven off chip.  This is GPI4 bit
-# twenty.  Setup Open Drain, Output Select, Three-State Control,  and
-# Three-State Select registers.
-#
-
-
-        pb0pesr  =        0x054
-        pb0pear  =        0x056
-
-	mflr	r30
-
-#-----------------------------------------------------------------------------
-# Vectors will be at 0x1F000000
-# Dummy Machine check handler just does RFI before true handler gets installed
-#-----------------------------------------------------------------------------
-#if 1  /* xuwentao added*/
-#ifdef SDRAM16MB
-         lis     r10,0x0000
-	addi 	r10,r10,0x0000
-#else
-        lis      r10,0x1F00
-	addi	r10,r10,0x0000
-#endif
-
-        mtspr   evpr,r10              #EVPR: 0x0 or 0x1f000000 depending
-        isync                         # on SDRAM memory model used.
-
-        lis     r10,0xFFFF                # clear PB0_PESR because some
-        ori    r10,r10,0xFFFF            #  transitions from flash,changed by linguohui
-        mtdcr   pb0pesr,r10               #  to load RAM image via RiscWatch
-        lis     r10,0x0000                #  cause PB0_PESR machine checks
-        mtdcr   pb0pear,r10
-        addis   r10,r10,0x0000            # clear the
-        mtxer   r10                       #           XER just in case...
-#endif /* xuwentao*/
-
-        bl      initb_ebiu0                      # init EBIU
-
-        bl      initb_config                     # config PPC and board
-
-
-
-
-#------------------------------------------------------------------------
-# EVPR  setup moved to top of this function.
-#------------------------------------------------------------------------
-#
-	mtlr	r30
-	blr
-        .end
diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S
deleted file mode 100644
index 386afdaad6c7..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init_brd.S
+++ /dev/null
@@ -1,1125 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: BSPS
-| File:      init_brd.s
-| Purpose:   Vesta Evaluation Board initialization subroutines.  The following
-|            routines are available:
-|              1. INITB_EBIU0:    Initialize EBIU0.
-|              2. INITB_CONFIG:   Configure board.
-|              3. INITB_HSMC0:    Initialize HSMC0 (SDRAM).
-|              4. INITB_HSMC1:    Initialize HSMC1 (SDRAM).
-|              5. INITB_CACHE:    Initialize Data and Instruction Cache.
-|              6. INITB_DCACHE:   Initialize Data Cache.
-|              7. INITB_ICACHE:   Initialize Instruction Cache.
-|              8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed)
-|
-| Changes:
-| Date:      Author  Comment:
-| ---------  ------  --------
-| 01-Mar-00  tjc     Created
-| 04-Mar-00  jfh     Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28)
-| 19-May-00  rlb     Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous
-|                    SDRAM space.  Changed cache ctl regs to reflect this.
-| 22-May-00  tjc     Changed initb_get_cspd interface and eliminated
-|                    initb_get_bspd routines.
-| 26-May-00  tjc     Added two nop instructions after all mtxxx/mfxxx
-|                    instructions due to PPC405 bug.
-+----------------------------------------------------------------------------*/
-#define VESTA
-#include "ppc_40x.h"
-#include "stb.h"
-
-/*----------------------------------------------------------------------------+
-| BOARD CONFIGURATION DEFINES
-+----------------------------------------------------------------------------*/
-#define CBS0_CR_VAL          0x00000002          /* CBS control reg value    */
-#define CIC0_CR_VAL          0xD0800448          /* CIC control reg value    */
-#define CIC0_SEL3_VAL        0x11500000          /* CIC select 3 reg value   */
-#define CIC0_VCR_VAL         0x00631700          /* CIC video cntl reg value */
-
-/*----------------------------------------------------------------------------+
-| EBIU0 BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#define EBIU0_BRCRH0_VAL     0x00000000          /* BR High 0 (Extension Reg)*/
-#define EBIU0_BRCRH1_VAL     0x00000000          /* BR High 1 (Extension Reg)*/
-#define EBIU0_BRCRH2_VAL     0x40000000          /* BR High 2 (Extension Reg)*/
-#define EBIU0_BRCRH3_VAL     0x40000000          /* BR High 3 (Extension Reg)*/
-#define EBIU0_BRCRH4_VAL     0x00000000          /* BR High 4 (Extension Reg)*/
-#define EBIU0_BRCRH5_VAL     0x00000000          /* BR High 5 (Extension Reg)*/
-#define EBIU0_BRCRH6_VAL     0x00000000          /* BR High 6 (Extension Reg)*/
-#define EBIU0_BRCRH7_VAL     0x40000000          /* BR High 7 (Extension Reg)*/
-
-#define EBIU0_BRCR0_VAL      0xFC58BFFE          /* BR 0: 16 bit Flash  4 MB */
-#define EBIU0_BRCR1_VAL      0xFF00BFFE          /* BR 1: Ext Connector 1 MB */
-#if 1
-#define EBIU0_BRCR2_VAL      0x207CFFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x3f              */
-#else
-#define EBIU0_BRCR2_VAL      0x207CCFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x0f              */
-#endif
-#define EBIU0_BRCR3_VAL      0x407CBFBE          /* BR 3: IDE Drive     8 MB */
-#define EBIU0_BRCR4_VAL      0xFF00BFFF          /* BR 4: Disabled.     0 MB */
-#define EBIU0_BRCR5_VAL      0xFF00BFFF          /* BR 5: Disabled.     0 MB */
-#define EBIU0_BRCR6_VAL      0xFF00BFFF          /* BR 6: Disabled.     0 MB */
-#define EBIU0_BRCR7_VAL      0xCE3F0003          /* BR 7: Line Mode DMA 2 MB */
-
-/*----------------------------------------------------------------------------+
-| GPIO DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_GPIO0_OUTPUT     (STB_GPIO0_BASE_ADDRESS+ 0x00)
-#define STB_GPIO0_TC         (STB_GPIO0_BASE_ADDRESS+ 0x04)
-#define STB_GPIO0_OS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x08)
-#define STB_GPIO0_OS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x0C)
-#define STB_GPIO0_TS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x10)
-#define STB_GPIO0_TS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x14)
-#define STB_GPIO0_OD         (STB_GPIO0_BASE_ADDRESS+ 0x18)
-#define STB_GPIO0_INPUT      (STB_GPIO0_BASE_ADDRESS+ 0x1C)
-#define STB_GPIO0_R1         (STB_GPIO0_BASE_ADDRESS+ 0x20)
-#define STB_GPIO0_R2         (STB_GPIO0_BASE_ADDRESS+ 0x24)
-#define STB_GPIO0_R3         (STB_GPIO0_BASE_ADDRESS+ 0x28)
-#define STB_GPIO0_IS_1_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x30)
-#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34)
-#define STB_GPIO0_IS_2_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x38)
-#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C)
-#define STB_GPIO0_IS_3_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x40)
-#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44)
-#define STB_GPIO0_SS_1       (STB_GPIO0_BASE_ADDRESS+ 0x50)
-#define STB_GPIO0_SS_2       (STB_GPIO0_BASE_ADDRESS+ 0x54)
-#define STB_GPIO0_SS_3       (STB_GPIO0_BASE_ADDRESS+ 0x58)
-
-#define GPIO0_TC_VAL         0x0C020004          /* three-state control val  */
-#define GPIO0_OS_0_31_VAL    0x51A00004          /* output select 0-31  val  */
-#define GPIO0_OS_32_63_VAL   0x0000002F          /* output select 32-63 val  */
-#define GPIO0_TS_0_31_VAL    0x51A00000          /* three-state sel 0-31  val*/
-#define GPIO0_TS_32_63_VAL   0x0000000F          /* three-state sel 32-63 val*/
-#define GPIO0_OD_VAL         0xC0000004          /* open drain val           */
-#define GPIO0_IS_1_0_31_VAL  0x50000151          /* input select 1 0-31  val */
-#define GPIO0_IS_1_32_63_VAL 0x00000000          /* input select 1 32-63 val */
-#define GPIO0_IS_2_0_31_VAL  0x00000000          /* input select 2 0-31  val */
-#define GPIO0_IS_2_32_63_VAL 0x00000000          /* input select 2 32-63 val */
-#define GPIO0_IS_3_0_31_VAL  0x00000440          /* input select 3 0-31  val */
-#define GPIO0_IS_3_32_63_VAL 0x00000000          /* input select 3 32-63 val */
-#define GPIO0_SS_1_VAL       0x00000000          /* sync select 1 val        */
-#define GPIO0_SS_2_VAL       0x00000000          /* sync select 2 val        */
-#define GPIO0_SS_3_VAL       0x00000000          /* sync select 3 val        */
-
-/*----------------------------------------------------------------------------+
-| XILINX DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_XILINX_LED       (STB_FPGA_BASE_ADDRESS+ 0x0100)
-#define STB_XILINX1_REG0     (STB_FPGA_BASE_ADDRESS+ 0x40000)
-#define STB_XILINX1_REG1     (STB_FPGA_BASE_ADDRESS+ 0x40002)
-#define STB_XILINX1_REG2     (STB_FPGA_BASE_ADDRESS+ 0x40004)
-#define STB_XILINX1_REG3     (STB_FPGA_BASE_ADDRESS+ 0x40006)
-#define STB_XILINX1_REG4     (STB_FPGA_BASE_ADDRESS+ 0x40008)
-#define STB_XILINX1_REG5     (STB_FPGA_BASE_ADDRESS+ 0x4000A)
-#define STB_XILINX1_REG6     (STB_FPGA_BASE_ADDRESS+ 0x4000C)
-#define STB_XILINX1_ID       (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX1_FLUSH    (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX2_REG0     (STB_FPGA_BASE_ADDRESS+ 0x80000)
-#define STB_XILINX2_REG1     (STB_FPGA_BASE_ADDRESS+ 0x80002)
-#define STB_XILINX2_REG2     (STB_FPGA_BASE_ADDRESS+ 0x80004)
-
-#define XILINX1_R0_VAL       0x2440              /* Xilinx 1 Register 0 Val  */
-#define XILINX1_R1_VAL       0x0025              /* Xilinx 1 Register 1 Val  */
-#define XILINX1_R2_VAL       0x0441              /* Xilinx 1 Register 2 Val  */
-#define XILINX1_R3_VAL       0x0008              /* Xilinx 1 Register 3 Val  */
-#define XILINX1_R4_VAL       0x0100              /* Xilinx 1 Register 4 Val  */
-#define XILINX1_R5_VAL       0x6810              /* Xilinx 1 Register 5 Val  */
-#define XILINX1_R6_VAL       0x0000              /* Xilinx 1 Register 6 Val  */
-#if 0
-#define XILINX2_R0_VAL       0x0008              /* Xilinx 2 Register 0 Val  */
-#define XILINX2_R1_VAL       0x0000              /* Xilinx 2 Register 1 Val  */
-#else
-#define XILINX2_R0_VAL       0x0018              /* disable IBM IrDA RxD     */
-#define XILINX2_R1_VAL       0x0008              /* enable SICC MAX chip     */
-#endif
-#define XILINX2_R2_VAL       0x0000              /* Xilinx 2 Register 2 Val  */
-
-/*----------------------------------------------------------------------------+
-| HSMC BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#ifdef SDRAM16MB
-#define HSMC0_BR0_VAL        0x000D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x008D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#else
-#define HSMC0_BR0_VAL        0x1F0D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x1F8D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#endif
-#define HSMC1_BR0_VAL        0xA00D2D55          /* 0xA0000000-A07FFFFF R/W  */
-#define HSMC1_BR1_VAL        0xA08D2D55          /* 0xA0800000-A0FFFFFF R/W  */
-
-/*----------------------------------------------------------------------------+
-| CACHE DEFINES
-+----------------------------------------------------------------------------*/
-#define DCACHE_NLINES               128          /* no. D-cache lines        */
-#define DCACHE_NBYTES                32          /* no. bytes/ D-cache line  */
-#define ICACHE_NLINES               256          /* no. I-cache lines        */
-#define ICACHE_NBYTES                32          /* no. bytes/ I-cache line  */
-#ifdef SDRAM16MB
-#define DCACHE_ENABLE        0x80000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x80000001          /* I-cache regions to enable*/
-#else
-#define DCACHE_ENABLE        0x18000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x18000001          /* I-cache regions to enable*/
-#endif
-
-/*----------------------------------------------------------------------------+
-| CPU CORE SPEED CALCULATION DEFINES
-+----------------------------------------------------------------------------*/
-#define GCS_LCNT                 500000          /* CPU speed loop count     */
-#define GCS_TROW_BYTES                8          /* no. bytes in table row   */
-#define GCS_CTICK_TOL               100          /* allowable clock tick tol */
-#define GCS_NMULT                     4          /* no. of core speed mults  */
-
-        /*--------------------------------------------------------------------+
-        |        No. 13.5Mhz
-        |        Clock Ticks
-        |        based on a
-        |        loop count    Bus
-        |        of 100,000    Speed
-        +--------------------------------------------------------------------*/
-gcs_lookup_table:
-        .int           50000,  54000000          /* 54.0 Mhz                 */
-        .int           66667,  40500000          /* 40.5 Mhz                 */
-        .int           54545,  49500000          /* 49.5 Mhz                 */
-        .int           46154,  58500000          /* 58.5 Mhz                 */
-        .int               0,         0          /* end of table flag        */
-
-
-/*****************************************************************************+
-| XXXXXXX  XXX XXX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX   X   XX XX    X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX X      XXX       XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XXXX       X        XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX X      XXX       XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX   X   XX XX      XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXXXXX  XXX XXX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    INITB_EBIU0.
-|
-| Purpose:    Initialize all the EBIU0 Bank Registers
-| Parameters: None.
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_ebiu0)
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 0
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR0_VAL@h
-        ori     r10,r10,EBIU0_BRCR0_VAL@l
-        mtdcr   ebiu0_brcr0,r10
-        lis     r10,EBIU0_BRCRH0_VAL@h
-        ori     r10,r10,EBIU0_BRCRH0_VAL@l
-        mtdcr   ebiu0_brcrh0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 1
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR1_VAL@h
-        ori     r10,r10,EBIU0_BRCR1_VAL@l
-        mtdcr   ebiu0_brcr1,r10
-        lis     r10,EBIU0_BRCRH1_VAL@h
-        ori     r10,r10,EBIU0_BRCRH1_VAL@l
-        mtdcr   ebiu0_brcrh1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 2
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR2_VAL@h
-        ori     r10,r10,EBIU0_BRCR2_VAL@l
-        mtdcr   ebiu0_brcr2,r10
-        lis     r10,EBIU0_BRCRH2_VAL@h
-        ori     r10,r10,EBIU0_BRCRH2_VAL@l
-        mtdcr   ebiu0_brcrh2,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 3
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR3_VAL@h
-        ori     r10,r10,EBIU0_BRCR3_VAL@l
-        mtdcr   ebiu0_brcr3,r10
-        lis     r10,EBIU0_BRCRH3_VAL@h
-        ori     r10,r10,EBIU0_BRCRH3_VAL@l
-        mtdcr   ebiu0_brcrh3,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 4
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR4_VAL@h
-        ori     r10,r10,EBIU0_BRCR4_VAL@l
-        mtdcr   ebiu0_brcr4,r10
-        lis     r10,EBIU0_BRCRH4_VAL@h
-        ori     r10,r10,EBIU0_BRCRH4_VAL@l
-        mtdcr   ebiu0_brcrh4,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 5
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR5_VAL@h
-        ori     r10,r10,EBIU0_BRCR5_VAL@l
-        mtdcr   ebiu0_brcr5,r10
-        lis     r10,EBIU0_BRCRH5_VAL@h
-        ori     r10,r10,EBIU0_BRCRH5_VAL@l
-        mtdcr   ebiu0_brcrh5,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 6
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR6_VAL@h
-        ori     r10,r10,EBIU0_BRCR6_VAL@l
-        mtdcr   ebiu0_brcr6,r10
-        lis     r10,EBIU0_BRCRH6_VAL@h
-        ori     r10,r10,EBIU0_BRCRH6_VAL@l
-        mtdcr   ebiu0_brcrh6,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 7
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR7_VAL@h
-        ori     r10,r10,EBIU0_BRCR7_VAL@l
-        mtdcr   ebiu0_brcr7,r10
-        lis     r10,EBIU0_BRCRH7_VAL@h
-        ori     r10,r10,EBIU0_BRCRH7_VAL@l
-        mtdcr   ebiu0_brcrh7,r10
-
-        blr
-        function_epilog(initb_ebiu0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CONFIG
-|
-| Purpose:    Configure the Vesta Evaluation Board.  The following items
-|             will be configured:
-|               1.  Cross-Bar Switch.
-|               2.  Chip Interconnect.
-|               3.  Clear/reset key PPC registers.
-|               4.  Xilinx and GPIO Registers.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_config)
-        /*--------------------------------------------------------------------+
-        |  Init CROSS-BAR SWITCH
-        +--------------------------------------------------------------------*/
-        lis     r10,CBS0_CR_VAL@h                /* r10 <- CBS Cntl Reg val  */
-        ori     r10,r10,CBS0_CR_VAL@l
-        mtdcr   cbs0_cr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init Chip-Interconnect (CIC) Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,CIC0_CR_VAL@h                /* r10 <- CIC Cntl Reg val  */
-        ori     r10,r10,CIC0_CR_VAL@l
-        mtdcr   cic0_cr,r10
-
-        lis     r10,CIC0_SEL3_VAL@h              /* r10 <- CIC SEL3 Reg val  */
-        ori     r10,r10,CIC0_SEL3_VAL@l
-        mtdcr   cic0_sel3,r10
-
-        lis     r10,CIC0_VCR_VAL@h               /* r10 <- CIC Vid C-Reg val */
-        ori     r10,r10,CIC0_VCR_VAL@l
-        mtdcr   cic0_vcr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear SGR and DCWR
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtspr   sgr,r10
-        mtspr   dcwr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear/set up some machine state registers.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000                       /* r10 <- 0                 */
-        mtdcr   ebiu0_besr,r10                   /* clr Bus Err Syndrome Reg */
-        mtspr   esr,r10                          /* clr Exceptn Syndrome Reg */
-        mttcr   r10                              /* timer control register   */
-
-        mtdcr   uic0_er,r10                      /* disable all interrupts   */
-
-	/* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */
-	lis	r10,    0x00600e00@h
-	ori	r10,r10,0x00600e00@l
-	mtdcr	uic0_pr,r10
-
-	li	r10,0x00000020			/* UIC_EIR1 */
-	mtdcr	uic0_tr,r10
-
-        lis     r10,0xFFFF                       /* r10 <- 0xFFFFFFFF        */
-        ori     r10,r10,0xFFFF                   /*                          */
-        mtdbsr  r10                              /* clear/reset the dbsr     */
-        mtdcr   uic0_sr,r10                      /* clear pending interrupts */
-
-        li      r10,0x1000                       /* set Machine Exception bit*/
-        oris    r10,r10,0x2                      /* set Criticl Exception bit*/
-        mtmsr   r10                              /* change MSR               */
-
-        /*--------------------------------------------------------------------+
-        |  Clear XER.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtxer   r10
-
-        /*--------------------------------------------------------------------+
-        |  Init GPIO0 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_GPIO0_TC@h           /* Three-state control      */
-        ori     r10,r10,STB_GPIO0_TC@l
-        lis     r11,    GPIO0_TC_VAL@h
-        ori     r11,r11,GPIO0_TC_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_0_31@h      /* output select 0-31       */
-        ori     r10,r10,STB_GPIO0_OS_0_31@l
-        lis     r11,    GPIO0_OS_0_31_VAL@h
-        ori     r11,r11,GPIO0_OS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_32_63@h     /* output select 32-63      */
-        ori     r10,r10,STB_GPIO0_OS_32_63@l
-        lis     r11,    GPIO0_OS_32_63_VAL@h
-        ori     r11,r11,GPIO0_OS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_0_31@h      /* three-state select 0-31  */
-        ori     r10,r10,STB_GPIO0_TS_0_31@l
-        lis     r11,    GPIO0_TS_0_31_VAL@h
-        ori     r11,r11,GPIO0_TS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_32_63@h     /* three-state select 32-63 */
-        ori     r10,r10,STB_GPIO0_TS_32_63@l
-        lis     r11,    GPIO0_TS_32_63_VAL@h
-        ori     r11,r11,GPIO0_TS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OD@h           /* open drain               */
-        ori     r10,r10,STB_GPIO0_OD@l
-        lis     r11,    GPIO0_OD_VAL@h
-        ori     r11,r11,GPIO0_OD_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_0_31@h    /* input select 1, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_1_0_31@l
-        lis     r11,    GPIO0_IS_1_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_1_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_32_63@h   /* input select 1, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_1_32_63@l
-        lis     r11,    GPIO0_IS_1_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_1_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_0_31@h    /* input select 2, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_2_0_31@l
-        lis     r11,    GPIO0_IS_2_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_2_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_32_63@h   /* input select 2, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_2_32_63@l
-        lis     r11,    GPIO0_IS_2_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_2_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_0_31@h    /* input select 3, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_3_0_31@l
-        lis     r11,    GPIO0_IS_3_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_3_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_32_63@h   /* input select 3, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_3_32_63@l
-        lis     r11,    GPIO0_IS_3_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_3_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_1@h         /* sync select 1            */
-        ori     r10,r10,STB_GPIO0_SS_1@l
-        lis     r11,    GPIO0_SS_1_VAL@h
-        ori     r11,r11,GPIO0_SS_1_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_2@h         /* sync select 2            */
-        ori     r10,r10,STB_GPIO0_SS_2@l
-        lis     r11,    GPIO0_SS_2_VAL@h
-        ori     r11,r11,GPIO0_SS_2_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_3@h         /* sync select 3            */
-        ori     r10,r10,STB_GPIO0_SS_3@l
-        lis     r11,    GPIO0_SS_3_VAL@h
-        ori     r11,r11,GPIO0_SS_3_VAL@l
-        stw     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #1 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX1_REG0@h       /* init Xilinx1 Reg 0       */
-        ori     r10,r10,STB_XILINX1_REG0@l
-        li      r11,XILINX1_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG1@h       /* init Xilinx1 Reg 1       */
-        ori     r10,r10,STB_XILINX1_REG1@l
-        li      r11,XILINX1_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG2@h       /* init Xilinx1 Reg 2       */
-        ori     r10,r10,STB_XILINX1_REG2@l
-        li      r11,XILINX1_R2_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG3@h       /* init Xilinx1 Reg 3       */
-        ori     r10,r10,STB_XILINX1_REG3@l
-        li      r11,XILINX1_R3_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG4@h       /* init Xilinx1 Reg 4       */
-        ori     r10,r10,STB_XILINX1_REG4@l
-        li      r11,XILINX1_R4_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG5@h       /* init Xilinx1 Reg 5       */
-        ori     r10,r10,STB_XILINX1_REG5@l
-        li      r11,XILINX1_R5_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG6@h       /* init Xilinx1 Reg 6       */
-        ori     r10,r10,STB_XILINX1_REG6@l
-        li      r11,XILINX1_R6_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_FLUSH@h      /* latch registers in Xilinx*/
-        ori     r10,r10,STB_XILINX1_FLUSH@l
-        li      r11,0x0000
-        sth     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #2 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX2_REG0@h       /* init Xilinx2 Reg 0       */
-        ori     r10,r10,STB_XILINX2_REG0@l
-        li      r11,XILINX2_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG1@h       /* init Xilinx2 Reg 1       */
-        ori     r10,r10,STB_XILINX2_REG1@l
-        li      r11,XILINX2_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG2@h       /* init Xilinx2 Reg 2       */
-        ori     r10,r10,STB_XILINX2_REG2@l
-        li      r11,XILINX2_R2_VAL
-        sth     r11,0(r10)
-
-        blr
-        function_epilog(initb_config)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC0.
-|
-| Purpose:    Initialize the HSMC0 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc0)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h
-        ori     r10,r10,HSMC0_BR0_VAL@l
-        mtdcr   hsmc0_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR1_VAL@h
-        ori     r10,r10,HSMC0_BR1_VAL@l
-        mtdcr   hsmc0_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_crr,r10
-        li      r3,0
-
-hsmc0_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC1.
-|
-| Purpose:    Initialize the HSMC1 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc1)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR0_VAL@h
-        ori     r10,r10,HSMC1_BR0_VAL@l
-        mtdcr   hsmc1_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR1_VAL@h
-        ori     r10,r10,HSMC1_BR1_VAL@l
-        mtdcr   hsmc1_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BANKS    */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH                  */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROGRAM MODE W/DATA REG VALUE */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_crr,r10
-        xor     r3,r3,r3
-
-hsmc1_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc1)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CACHE
-|
-| Purpose:    This routine will enable Data and Instruction Cache.
-|             The Data Cache is an 8K two-way set associative and the
-|             Instruction Cache is an 16K two-way set associative cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_cache)
-        mflr    r0                               /* Save return addr         */
-
-        bl      initb_Dcache                     /* enable D-Cache           */
-        bl      initb_Icache                     /* enable I-Cache           */
-
-        mtlr    r0
-        blr
-       function_epilog(initb_cache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_DCACHE
-|
-| Purpose:    This routine will invalidate all data in the Data Cache and
-|             then enable D-Cache.  If cache is enabled already, the D-Cache
-|             will be flushed before the data is invalidated.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Dcache)
-        /*--------------------------------------------------------------------+
-        |  Flush Data Cache if enabled
-        +--------------------------------------------------------------------*/
-        mfdccr  r10                              /* r10 <- DCCR              */
-        isync                                    /* ensure prev insts done   */
-        cmpwi   r10,0x00
-        beq     ic_dcinv                         /* D-cache off, invalidate  */
-
-        /*--------------------------------------------------------------------+
-        |  Data Cache enabled, force known memory addresses to be Cached
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        li      r11,DCACHE_NLINES                /* r11 <- # A-way addresses */
-        addi    r11,r11,DCACHE_NLINES            /* r11 <- # B-way addresses */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcload:
-        lwz     r12,0(r10)                       /* force cache of address   */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcload
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Flush the known memory addresses from Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcflush:
-        dcbf    0,r10                            /* flush D-cache line       */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcflush
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Disable then invalidate Data Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- 0                 */
-        mtdccr  r10                              /* disable the D-Cache      */
-        isync                                    /* ensure prev insts done   */
-
-ic_dcinv:
-        li      r10,0                            /* r10 <- line address      */
-        li      r11,DCACHE_NLINES                /* r11 <- # lines in cache  */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcloop:
-        dccci   0,r10                            /* invalidate A/B cache lns */
-        addi    r10,r10,DCACHE_NBYTES            /* bump to next line        */
-        bdnz    ic_dcloop
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Data Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,DCACHE_ENABLE@h              /* r10 <- D-cache enable msk*/
-        ori     r10,r10,DCACHE_ENABLE@l
-        mtdccr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Dcache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_ICACHE
-|
-| Purpose:    This routine will invalidate all data in the Instruction
-|             Cache then enable I-Cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Icache)
-        /*--------------------------------------------------------------------+
-        |  Invalidate Instruction Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- lines address     */
-        iccci   0,r10                            /* invalidate all I-cache   */
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Instruction Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,ICACHE_ENABLE@h              /* r10 <- I-cache enable msk*/
-        ori     r10,r10,ICACHE_ENABLE@l
-        mticcr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Icache)
-
-#if 0
-/******************************************************************************
-|
-| Routine:    INITB_GET_CSPD
-|
-| Purpose:    Determine the CPU Core Speed.  The 13.5 Mhz Time Base
-|             Counter (TBC) is used to measure a conditional branch
-|             instruction.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       1. This routine assumes the bdnz branch instruction takes
-|                two instruction cycles to complete.
-|             2. This routine must be called before interrupts are enabled.
-|
-******************************************************************************/
-        function_prolog(initb_get_cspd)
-        mflr    r0                               /* Save return address      */
-        /*--------------------------------------------------------------------+
-        |  Set-up timed loop
-        +--------------------------------------------------------------------*/
-        lis     r9,gcs_time_loop@h               /* r9  <- addr loop instr   */
-        ori     r9,r9,gcs_time_loop@l
-        lis     r10,GCS_LCNT@h                   /* r10 <- loop count        */
-        ori     r10,r10,GCS_LCNT@l
-        mtctr   r10                              /* ctr <- loop count        */
-        lis     r11,STB_TIMERS_TBC@h             /* r11 <- TBC register addr */
-        ori     r11,r11,STB_TIMERS_TBC@l
-        li      r12,0                            /* r12 <- 0                 */
-
-        /*--------------------------------------------------------------------+
-        |  Cache timed-loop instruction
-        +--------------------------------------------------------------------*/
-        icbt    0,r9
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Get number of 13.5 Mhz cycles to execute time-loop
-        +--------------------------------------------------------------------*/
-        stw     r12,0(r11)                       /* reset TBC                */
-gcs_time_loop:
-        bdnz+   gcs_time_loop                    /* force branch pred taken  */
-        lwz     r5,0(r11)                        /* r5 <- num 13.5 Mhz ticks */
-        li      r6,5                             /* LUT based on 1/5th the...*/
-        divw    r5,r5,r6                         /*..loop count used         */
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Look-up core speed based on TBC value
-        +--------------------------------------------------------------------*/
-        lis     r6,gcs_lookup_table@h            /* r6 <- pts at core spd LUT*/
-        ori     r6,r6,gcs_lookup_table@l
-        bl      gcs_cspd_lookup                  /* find core speed in LUT   */
-
-        mtlr    r0                               /* set return address       */
-        blr
-        function_epilog(initb_get_cspd)
-
-#endif
-/*****************************************************************************+
-| XXXX   XX   XX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX    XXX  XX   X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX    XXXX XX     XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XX    XX XXXX     XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX    XX  XXX     XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX    XX   XX     XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXX   XX   XX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    HSMC_CR_WAIT
-|
-| Purpose:    Wait for the HSMC Control Register (bits 12-16) to be reset
-|             after an auto-refresh, pre-charge or program mode register
-|             command execution.
-|
-| Parameters: R3 = HSMC Control Register ID.
-|                  0: HSMC0 CR0
-|                  1: HSMC0 CR1
-|                  2: HSMC1 CR0
-|                  3: HSMC1 CR1
-|
-| Returns:    R3 = 0: Successful
-|                 -1: Unsuccessful
-|
-******************************************************************************/
-hsmc_cr_wait:
-
-        li      r11,10                           /* r11 <- retry counter     */
-        mtctr   r11                              /* set retry counter        */
-        mr      r11,r3                           /* r11 <- HSMC CR reg id    */
-
-hsmc_cr_rep:
-        bdz     hsmc_cr_err                      /* branch if max retries hit*/
-
-        /*--------------------------------------------------------------------+
-        |  GET HSMCx_CRx value based on HSMC Control Register ID
-        +--------------------------------------------------------------------*/
-try_hsmc0_cr0:                                   /* CHECK IF ID=HSMC0 CR0 REG*/
-        cmpwi   cr0,r11,0x0000
-        bne     cr0,try_hsmc0_cr1
-        mfdcr   r10,hsmc0_cr0                    /* r11 <- HSMC0 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc0_cr1:                                   /* CHECK IF ID=HSMC0 CR1 REG*/
-        cmpwi   cr0,r11,0x0001
-        bne     cr0,try_hsmc1_cr0
-        mfdcr   r10,hsmc0_cr1                    /* r10 <- HSMC0 CR1 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr0:                                   /* CHECK IF ID=HSMC1 CR0 REG*/
-        cmpwi   cr0,r11,0x0002
-        bne     cr0,try_hsmc1_cr1
-        mfdcr   r10,hsmc1_cr0                    /* r10 <- HSMC1 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr1:                                   /* CHECK IF ID=HSMC1 CR1 REG*/
-        cmpwi   cr0,r11,0x0003
-        bne     cr0,hsmc_cr_err
-        mfdcr   r10,hsmc1_cr1                    /* r10 <- HSMC1 CR1 value   */
-
-        /*--------------------------------------------------------------------+
-        |  Check if HSMC CR register was reset after command execution
-        +--------------------------------------------------------------------*/
-hsmc_cr_read:
-        lis     r12,0x000F                       /* create "AND" mask        */
-        ori     r12,r12,0x8000
-        and.    r10,r10,r12                      /* r10 <- HSMC CR bits 12-16*/
-        bne     cr0,hsmc_cr_rep                  /* wait for bits to reset   */
-        li      r3,0                             /* set return code = success*/
-        b       hsmc_cr_done
-
-hsmc_cr_err:                                     /* ERROR: SDRAM didn't reset*/
-        li      r3,-1                            /* set RC=unsuccessful      */
-
-hsmc_cr_done:
-        blr
-
-#if 0
-/******************************************************************************
-|
-| Routine:    GCS_CSPD_LOOKUP
-|
-| Purpose:    Uses the number of 13.5 Mhz clock ticks found after executing
-|             the branch instruction time loop to look-up the CPU Core Speed
-|             in the Core Speed Look-up Table.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|             R5 = Number of 13.5 Mhz clock ticks found in time loop.
-|             R6 = Pointer to Core-Speed Look-Up Table
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       Core Speed = Bus Speed * Mult Factor (1-4x).
-|
-******************************************************************************/
-gcs_cspd_lookup:
-
-        li      r9,1                             /* r9 <- core speed mult    */
-        /*--------------------------------------------------------------------+
-        |  Get theoritical number 13.5 Mhz ticks for a given Bus Speed from
-        |  Look-up Table.  Check all mult factors to determine if calculated
-        |  value matches theoretical value (within a tolerance).
-        +--------------------------------------------------------------------*/
-gcs_cspd_loop:
-        lwz     r10,0(r6)                        /* r10 <- no. ticks from LUT*/
-        divw    r10,r10,r9                       /* r10 <- div mult (1-4x)   */
-        subi    r11,r10,GCS_CTICK_TOL            /* r11 <- no. tks low range */
-        addi    r12,r10,GCS_CTICK_TOL            /* r12 <- no. tks high range*/
-
-        cmpw    cr0,r5,r11                       /* calc value within range? */
-        blt     gcs_cspd_retry                   /* less than low range      */
-        cmpw    cr0,r5,r12
-        bgt     gcs_cspd_retry                   /* greater than high range  */
-        b       gcs_cspd_fnd                     /* calc value within range  */
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Check next mult factor
-        +--------------------------------------------------------------------*/
-gcs_cspd_retry:
-        addi    r9,r9,1                          /* bump mult factor (1-4x)  */
-        cmpwi   cr0,r9,GCS_NMULT
-        ble     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT
-        +--------------------------------------------------------------------*/
-        li      r9,1                             /* reset mult factor        */
-        addi    r6,r6,GCS_TROW_BYTES             /* point at next table entry*/
-        lwz     r10,0(r6)
-        cmpwi   cr0,r10,0                        /* check for EOT flag       */
-        bne     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE
-        +--------------------------------------------------------------------*/
-gcs_cspd_fnd:
-        lwz     r5,4(r6)                         /*  r5  <- Bus Speed in LUT */
-        mullw   r6,r5,r9                         /*  r6  <- Core speed       */
-        stw     r5,0(r3)                         /* (r3) <- Bus Speed        */
-        stw     r6,0(r4)                         /* (r4) <- Core Speed       */
-
-        blr
-#endif
diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h
deleted file mode 100644
index 9afa5ab24d26..000000000000
--- a/arch/ppc/boot/simple/rw4/stb.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1999
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author: Maciej P. Tyrlik
-| Component: Include file.
-| File: stb.h
-| Purpose: Common Set-tob-box definitions.
-| Changes:
-| Date:         Comment:
-| -----         --------
-| 14-Jan-97     Created for ElPaso pass 1                                   MPT
-| 13-May-97     Added function prototype and global variables               MPT
-| 08-Dec-98     Added RAW IR task information                               MPT
-| 19-Jan-99     Port to Romeo                                               MPT
-| 19-May-00     Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF    RLB
-+----------------------------------------------------------------------------*/
-
-#ifndef _stb_h_
-#define _stb_h_
-
-/*----------------------------------------------------------------------------+
-| Read/write from I/O macros.
-+----------------------------------------------------------------------------*/
-#define inbyte(port)            (*((unsigned char volatile *)(port)))
-#define outbyte(port,data)      *(unsigned char volatile *)(port)=\
-                                (unsigned char)(data)
-
-#define inshort(port)           (*((unsigned short volatile *)(port)))
-#define outshort(port,data)     *(unsigned short volatile *)(port)=\
-                                (unsigned short)(data)
-
-#define inword(port)            (*((unsigned long volatile *)(port)))
-#define outword(port,data)      *(unsigned long volatile *)(port)=\
-                                (unsigned long)(data)
-
-/*----------------------------------------------------------------------------+
-| STB interrupts.
-+----------------------------------------------------------------------------*/
-#define STB_XP_TP_INT           0
-#define STB_XP_APP_INT          1
-#define STB_AUD_INT             2
-#define STB_VID_INT             3
-#define STB_DMA0_INT            4
-#define STB_DMA1_INT            5
-#define STB_DMA2_INT            6
-#define STB_DMA3_INT            7
-#define STB_SCI_INT             8
-#define STB_I2C1_INT            9
-#define STB_I2C2_INT            10
-#define STB_GPT_PWM0            11
-#define STB_GPT_PWM1            12
-#define STB_SCP_INT             13
-#define STB_SSP_INT             14
-#define STB_GPT_PWM2            15
-#define STB_EXT5_INT            16
-#define STB_EXT6_INT            17
-#define STB_EXT7_INT            18
-#define STB_EXT8_INT            19
-#define STB_SCC_INT             20
-#define STB_SICC_RECV_INT       21
-#define STB_SICC_TRAN_INT       22
-#define STB_PPU_INT             23
-#define STB_DCRX_INT            24
-#define STB_EXT0_INT            25
-#define STB_EXT1_INT            26
-#define STB_EXT2_INT            27
-#define STB_EXT3_INT            28
-#define STB_EXT4_INT            29
-#define STB_REDWOOD_ENET_INT    STB_EXT1_INT
-
-/*----------------------------------------------------------------------------+
-| STB tasks, task stack sizes, and task priorities.  The actual task priority
-| is 1 more than the specified number since priority 0 is reserved (system
-| internally adds 1 to supplied priority number).
-+----------------------------------------------------------------------------*/
-#define STB_IDLE_TASK_SS        (5* 1024)
-#define STB_IDLE_TASK_PRIO      0
-#define STB_LEDTEST_SS          (2* 1024)
-#define STB_LEDTEST_PRIO        0
-#define STB_CURSOR_TASK_SS      (10* 1024)
-#define STB_CURSOR_TASK_PRIO    7
-#define STB_MPEG_TASK_SS        (10* 1024)
-#define STB_MPEG_TASK_PRIO      9
-#define STB_DEMUX_TASK_SS       (10* 1024)
-#define STB_DEMUX_TASK_PRIO     20
-#define RAW_STB_IR_TASK_SS      (10* 1024)
-#define RAW_STB_IR_TASK_PRIO    20
-
-#define STB_SERIAL_ER_TASK_SS   (10* 1024)
-#define STB_SERIAL_ER_TASK_PRIO 1
-#define STB_CA_TASK_SS          (10* 1024)
-#define STB_CA_TASK_PRIO        8
-
-#define INIT_DEFAULT_VIDEO_SS   (10* 1024)
-#define INIT_DEFAULT_VIDEO_PRIO 8
-#define INIT_DEFAULT_SERVI_SS   (10* 1024)
-#define INIT_DEFAULT_SERVI_PRIO 8
-#define INIT_DEFAULT_POST_SS    (10* 1024)
-#define INIT_DEFAULT_POST_PRIO  8
-#define INIT_DEFAULT_INTER_SS   (10* 1024)
-#define INIT_DEFAULT_INTER_PRIO 8
-#define INIT_DEFAULT_BR_SS      (10* 1024)
-#define INIT_DEFAULT_BR_PRIO    8
-#define INITIAL_TASK_STACK_SIZE (32* 1024)
-
-#ifdef VESTA
-/*----------------------------------------------------------------------------+
-| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.
-|
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F200,0000 - F210,FFFF        FPGA logic
-|                                   Ethernet       = F200,0000
-|                                   LED Display    = F200,0100
-|                                   Xilinx #1 Regs = F204,0000
-|                                   Xilinx #2 Regs = F208,0000
-|                                   Spare          = F20C,0000
-|                                   IDE CS0        = F210,0000
-|    F410,0000 - F410,FFFF        IDE CS1
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC  (16550 + infra red)
-|    C001,0000 - C001,0018        PPU   (Parallel Port)
-|    C002,0000 - C002,001B        SC0   (Smart Card 0)
-|    C003,0000 - C003,000F        I2C0
-|    C004,0000 - C004,0009        SCC   (16550 UART)
-|    C005,0000 - C005,0124        GPT   (Timers)
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,001b        SC1   (Smart Card 1)
-|    C008,0000 - C008,FFFF        Unused
-|    C009,0000 - C009,FFFF        Unused
-|    C00A,0000 - C00A,FFFF        Unused
-|    C00B,0000 - C00B,000F        I2C1
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0010        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM1  (16M)
-|    0000,0000 - 00FF,FFFF        SDRAM0  (16M)
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF2000000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC0_BASE_ADDRESS    0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_SC1_BASE_ADDRESS    0xC0070000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-/*----------------------------------------------------------------------------+
-|The following are used by the IBM RTOS SW.
-|15-May-00 Changed these values to reflect movement of base addresses in
-|order to support 32MB of contiguous SDRAM space.
-|Points to the cacheable region since these values are used in IBM RTOS
-|to establish the vector address.
-+----------------------------------------------------------------------------*/
-#define STB_SDRAM1_BASE_ADDRESS 0x20000000
-#define STB_SDRAM1_SIZE         0x01000000
-#define STB_SDRAM0_BASE_ADDRESS 0x1F000000
-#define STB_SDRAM0_SIZE         0x01000000
-
-#else
-/*----------------------------------------------------------------------------+
-| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.  OPB
-| devices are inside the ElPaso chip.
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F144,0000 - F104,FFFF        FPGA logic
-|    F140,0000 - F100,0000        ethernet (through FPGA logic)
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC (16550+ infra red)
-|    C001,0000 - C001,0016        PPU (parallel port)
-|    C002,0000 - C002,001B        SC (smart card)
-|    C003,0000 - C003,000F        I2C 1
-|    C004,0000 - C004,0009        SCC (16550 UART)
-|    C005,0000 - C005,0124        Timers
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,0058        GPIO1
-|    C008,0000 - C008,0058        GPIO2
-|    C009,0000 - C009,0058        GPIO3
-|    C00A,0000 - C00A,0058        GPIO4
-|    C00B,0000 - C00B,000F        I2C 2
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0006        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM 16M
-|    0000,0000 - 00FF,FFFF        DRAM 16M
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF1440000
-#define STB_ENET_BASE_ADDRESS   0xF1400000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC_BASE_ADDRESS     0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_GPIO1_BASE_ADDRESS  0xC0070000
-#define STB_GPIO2_BASE_ADDRESS  0xC0080000
-#define STB_GPIO3_BASE_ADDRESS  0xC0090000
-#define STB_GPIO4_BASE_ADDRESS  0xC00A0000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-#define STB_SDRAM_BASE_ADDRESS  0xA0000000
-#endif
-
-/*----------------------------------------------------------------------------+
-| Other common defines.
-+----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE    1
-#endif
-
-#ifndef FALSE
-#define FALSE   0
-#endif
-
-#endif /* _stb_h_ */
diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c
deleted file mode 100644
index ca1743e3e912..000000000000
--- a/arch/ppc/boot/simple/uartlite_tty.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Xilinx UARTLITE bootloader driver
- *
- * Copyright (c) 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR))
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	/* Clear the RX FIFO */
-	out_be32(UARTLITE_BASEADDR + 0x0C, 0x2);
-	return 0;
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */
-	out_be32(UARTLITE_BASEADDR + 0x4, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */
-	return in_be32(UARTLITE_BASEADDR);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0);
-}
diff --git a/arch/ppc/boot/utils/.gitignore b/arch/ppc/boot/utils/.gitignore
deleted file mode 100644
index bbdfb3b9c532..000000000000
--- a/arch/ppc/boot/utils/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-mkprep
-mkbugboot
-mktree
diff --git a/arch/ppc/boot/utils/elf.pl b/arch/ppc/boot/utils/elf.pl
deleted file mode 100644
index d3e9d9d5b84e..000000000000
--- a/arch/ppc/boot/utils/elf.pl
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# ELF header field numbers
-#
-
-$e_ident	=  0;	# Identification bytes / magic number
-$e_type		=  1;	# ELF file type
-$e_machine	=  2;	# Target machine type
-$e_version	=  3;	# File version
-$e_entry	=  4;	# Start address
-$e_phoff	=  5;	# Program header file offset
-$e_shoff	=  6;	# Section header file offset
-$e_flags	=  7;	# File flags
-$e_ehsize	=  8;	# Size of ELF header
-$e_phentsize	=  9;	# Size of program header
-$e_phnum	= 10;	# Number of program header entries
-$e_shentsize	= 11;	# Size of section header
-$e_shnum	= 12;	# Number of section header entries
-$e_shstrndx	= 13;	# Section header table string index
-
-#
-# Section header field numbers
-#
-
-$sh_name	=  0;	# Section name
-$sh_type	=  1;	# Section header type
-$sh_flags	=  2;	# Section header flags
-$sh_addr	=  3;	# Virtual address
-$sh_offset	=  4;	# File offset
-$sh_size	=  5;	# Section size
-$sh_link	=  6;	# Miscellaneous info
-$sh_info	=  7;	# More miscellaneous info
-$sh_addralign	=  8;	# Memory alignment
-$sh_entsize	=  9;	# Entry size if this is a table
diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c
deleted file mode 100644
index 1640c4199ca6..000000000000
--- a/arch/ppc/boot/utils/mkbugboot.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Makes a Motorola PPCBUG ROM bootable image which can be flashed
- * into one of the FLASH banks on a Motorola PowerPlus board.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#define ELF_HEADER_SIZE	65536
-
-#include <unistd.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/* PPCBUG ROM boot header */
-typedef struct bug_boot_header {
-  uint8_t	magic_word[4];		/* "BOOT" */
-  uint32_t	entry_offset;		/* Offset from top of header to code */
-  uint32_t	routine_length;		/* Length of code */
-  uint8_t	routine_name[8];	/* Name of the boot code */
-} bug_boot_header_t;
-
-#define HEADER_SIZE	sizeof(bug_boot_header_t)
-
-void update_checksum(void *buf, size_t size, uint16_t *sum)
-{
-	uint32_t csum = *sum;
-
-	while (size) {
-		csum += *(uint16_t *)buf;
-		if (csum > 0xffff)
-			csum -= 0xffff;
-		buf = (uint16_t *)buf + 1;
-		size -= 2;
-	}
-	*sum = csum;
-}
-
-uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum)
-{
-	uint8_t buf[SIZE];
-	int offset = 0;
-	int n;
-	uint32_t image_size = 0;
-
-	lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET);
-
-	/* Copy an image while recording its size */
-	while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) {
-		n += offset;
-		offset = n & 1;
-		n -= offset;
-		image_size = image_size + n;
-		/* who's going to deal with short writes? */
-		write(out_fd, buf, n);
-		update_checksum(buf, n, sum);
-		if (offset)
-			buf[0] = buf[n];
-	}
-
-	/* BUG romboot requires that our size is divisible by 2 */
-	/* align image to 2 byte boundary */
-	if (offset) {
-		image_size += 2;
-		buf[1] = '\0';
-		write(out_fd, buf, 2);
-		update_checksum(buf, 2, sum);
-	}
-	return image_size;
-}
-
-void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum)
-{
-	static bug_boot_header_t bbh = {
-		.magic_word = "BOOT",
-		.routine_name = "LINUXROM"
-	};
-
-	/* Fill in the PPCBUG ROM boot header */
-	bbh.entry_offset = htonl(HEADER_SIZE);	/* Entry address */
-	bbh.routine_length= htonl(HEADER_SIZE+boot_size+2);	/* Routine length */
-
-	/* Output the header and bootloader to the file */
-	write(out_fd, &bbh, sizeof(bug_boot_header_t));
-	update_checksum(&bbh, sizeof(bug_boot_header_t), sum);
-}
-
-int main(int argc, char *argv[])
-{
-	int image_fd, bugboot_fd;
-	uint32_t kernel_size = 0;
-	uint16_t checksum = 0;
-
-	if (argc != 3) {
-		fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]);
-		exit(-1);
-	}
-
-	/* Get file args */
-
-	/* kernel image file */
-	if ((image_fd = open(argv[1] , 0)) < 0)
-		exit(-1);
-
-	/* bugboot file */
-	if (!strcmp(argv[2], "-"))
-		bugboot_fd = 1;			/* stdout */
-	else if ((bugboot_fd = creat(argv[2] , 0755)) < 0)
-		exit(-1);
-
-	/* Set file position after ROM header block where zImage will be written */
-	lseek(bugboot_fd, HEADER_SIZE, SEEK_SET);
-
-	/* Copy kernel image into bugboot image */
-	kernel_size = copy_image(image_fd, bugboot_fd, &checksum);
-
-	/* Set file position to beginning where header/romboot will be written */
-	lseek(bugboot_fd, 0, SEEK_SET);
-
-	/* Write out BUG header/romboot */
-	write_bugboot_header(bugboot_fd, kernel_size, &checksum);
-
-	/* Write out the calculated checksum */
-	lseek(bugboot_fd, 0, SEEK_END);
-	write(bugboot_fd, &checksum, 2);
-
-	/* Close bugboot file */
-	close(bugboot_fd);
-	return 0;
-}
diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c
deleted file mode 100644
index 192bb397126f..000000000000
--- a/arch/ppc/boot/utils/mkprep.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Makes a prep bootable image which can be dd'd onto
- * a disk device to make a bootdisk.  Will take
- * as input a elf executable, strip off the header
- * and write out a boot image as:
- * 1) default - strips elf header
- *      suitable as a network boot image
- * 2) -pbp - strips elf header and writes out prep boot partition image
- *      cat or dd onto disk for booting
- * 3) -asm - strips elf header and writes out as asm data
- *      useful for generating data for a compressed image
- *                  -- Cort
- *
- * Modified for x86 hosted builds by Matt Porter <porter@neta.com>
- * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de>
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/*
- * Partition table entry
- *  - from the PReP spec
- */
-typedef struct partition_entry {
-	unsigned char boot_indicator;
-	unsigned char starting_head;
-	unsigned char starting_sector;
-	unsigned char starting_cylinder;
-
-	unsigned char system_indicator;
-	unsigned char ending_head;
-	unsigned char ending_sector;
-	unsigned char ending_cylinder;
-
-	unsigned char beginning_sector[4];
-	unsigned char number_of_sectors[4];
-} partition_entry_t;
-
-#define BootActive	0x80
-#define SystemPrep	0x41
-
-void copy_image(FILE *, FILE *);
-void write_prep_partition(FILE *, FILE *);
-void write_asm_data(FILE *, FILE *);
-
-unsigned int elfhdr_size = 65536;
-
-int main(int argc, char *argv[])
-{
-	FILE *in, *out;
-	int argptr = 1;
-	int prep = 0;
-	int asmoutput = 0;
-
-	if (argc < 3 || argc > 4) {
-		fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",
-			argv[0]);
-		exit(-1);
-	}
-
-/* needs to handle args more elegantly -- but this is a small/simple program */
-
-	/* check for -pbp */
-	if (!strcmp(argv[argptr], "-pbp")) {
-		prep = 1;
-		argptr++;
-	}
-
-	/* check for -asm */
-	if (!strcmp(argv[argptr], "-asm")) {
-		asmoutput = 1;
-		argptr++;
-	}
-
-	/* input file */
-	if (!strcmp(argv[argptr], "-"))
-		in = stdin;
-	else if (!(in = fopen(argv[argptr], "r")))
-		exit(-1);
-	argptr++;
-
-	/* output file */
-	if (!strcmp(argv[argptr], "-"))
-		out = stdout;
-	else if (!(out = fopen(argv[argptr], "w")))
-		exit(-1);
-	argptr++;
-
-	/* skip elf header in input file */
-	/*if ( !prep )*/
-	fseek(in, elfhdr_size, SEEK_SET);
-
-	/* write prep partition if necessary */
-	if (prep)
-		write_prep_partition(in, out);
-
-	/* write input image to bootimage */
-	if (asmoutput)
-		write_asm_data(in, out);
-	else
-		copy_image(in, out);
-
-	return 0;
-}
-
-void store_le32(unsigned int v, unsigned char *p)
-{
-	p[0] = v;
-	p[1] = v >>= 8;
-	p[2] = v >>= 8;
-	p[3] = v >> 8;
-}
-
-void write_prep_partition(FILE *in, FILE *out)
-{
-	unsigned char block[512];
-	partition_entry_t pe;
-	unsigned char *entry  = block;
-	unsigned char *length = block + 4;
-	long pos = ftell(in), size;
-
-	if (fseek(in, 0, SEEK_END) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-	size = ftell(in);
-	if (fseek(in, pos, SEEK_SET) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-
-	memset(block, '\0', sizeof(block));
-
-	/* set entry point and boot image size skipping over elf header */
-	store_le32(0x400/*+65536*/, entry);
-	store_le32(size-elfhdr_size+0x400, length);
-
-	/* sets magic number for msdos partition (used by linux) */
-	block[510] = 0x55;
-	block[511] = 0xAA;
-
-	/*
-	* Build a "PReP" partition table entry in the boot record
-	*  - "PReP" may only look at the system_indicator
-	*/
-	pe.boot_indicator   = BootActive;
-	pe.system_indicator = SystemPrep;
-	/*
-	* The first block of the diskette is used by this "boot record" which
-	* actually contains the partition table. (The first block of the
-	* partition contains the boot image, but I digress...)  We'll set up
-	* one partition on the diskette and it shall contain the rest of the
-	* diskette.
-	*/
-	pe.starting_head     = 0;	/* zero-based			     */
-	pe.starting_sector   = 2;	/* one-based			     */
-	pe.starting_cylinder = 0;	/* zero-based			     */
-	pe.ending_head       = 1;	/* assumes two heads		     */
-	pe.ending_sector     = 18;	/* assumes 18 sectors/track	     */
-	pe.ending_cylinder   = 79;	/* assumes 80 cylinders/diskette     */
-
-	/*
-	* The "PReP" software ignores the above fields and just looks at
-	* the next two.
-	*   - size of the diskette is (assumed to be)
-	*     (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
-	*   - unlike the above sector numbers, the beginning sector is zero-based!
-	*/
-#if 0
-	store_le32(1, pe.beginning_sector);
-#else
-	/* This has to be 0 on the PowerStack? */
-	store_le32(0, pe.beginning_sector);
-#endif
-
-	store_le32(2*18*80-1, pe.number_of_sectors);
-
-	memcpy(&block[0x1BE], &pe, sizeof(pe));
-
-	fwrite(block, sizeof(block), 1, out);
-	fwrite(entry, 4, 1, out);
-	fwrite(length, 4, 1, out);
-	/* set file position to 2nd sector where image will be written */
-	fseek( out, 0x400, SEEK_SET );
-}
-
-
-
-void copy_image(FILE *in, FILE *out)
-{
-	char buf[SIZE];
-	int n;
-
-	while ( (n = fread(buf, 1, SIZE, in)) > 0 )
-		fwrite(buf, 1, n, out);
-}
-
-
-void
-write_asm_data(FILE *in, FILE *out)
-{
-	int i, cnt, pos = 0;
-	unsigned int cksum = 0, val;
-	unsigned char *lp;
-	unsigned char buf[SIZE];
-	size_t len;
-
-	fputs("\t.data\n\t.globl input_data\ninput_data:\n", out);
-	while ((len = fread(buf, 1, sizeof(buf), in)) > 0) {
-		cnt = 0;
-		lp = buf;
-		/* Round up to longwords */
-		while (len & 3)
-			buf[len++] = '\0';
-		for (i = 0;  i < len;  i += 4) {
-			if (cnt == 0)
-				fputs("\t.long\t", out);
-			fprintf(out, "0x%02X%02X%02X%02X",
-				lp[0], lp[1], lp[2], lp[3]);
-			val = *(unsigned long *)lp;
-			cksum ^= val;
-			lp += 4;
-			if (++cnt == 4) {
-				cnt = 0;
-				fprintf(out, " # %x \n", pos+i-12);
-			} else {
-				fputs(",", out);
-			}
-		}
-		if (cnt)
-			fputs("0\n", out);
-		pos += len;
-	}
-	fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
-	fprintf(stderr, "cksum = %x\n", cksum);
-}
diff --git a/arch/ppc/boot/utils/mktree.c b/arch/ppc/boot/utils/mktree.c
deleted file mode 100644
index 2be22e28f2b3..000000000000
--- a/arch/ppc/boot/utils/mktree.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Makes a tree bootable image for IBM Evaluation boards.
- * Basically, just take a zImage, skip the ELF header, and stuff
- * a 32 byte header on the front.
- *
- * We use htonl, which is a network macro, to make sure we're doing
- * The Right Thing on an LE machine.  It's non-obvious, but it should
- * work on anything BSD'ish.
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* This gets tacked on the front of the image.  There are also a few
- * bytes allocated after the _start label used by the boot rom (see
- * head.S for details).
- */
-typedef struct boot_block {
-	uint32_t bb_magic;		/* 0x0052504F */
-	uint32_t bb_dest;		/* Target address of the image */
-	uint32_t bb_num_512blocks;	/* Size, rounded-up, in 512 byte blks */
-	uint32_t bb_debug_flag;	/* Run debugger or image after load */
-	uint32_t bb_entry_point;	/* The image address to start */
-	uint32_t bb_checksum;	/* 32 bit checksum including header */
-	uint32_t reserved[2];
-} boot_block_t;
-
-#define IMGBLK	512
-char	tmpbuf[IMGBLK];
-
-int main(int argc, char *argv[])
-{
-	int	in_fd, out_fd;
-	int	nblks, i;
-	uint	cksum, *cp;
-	struct	stat	st;
-	boot_block_t	bt;
-
-	if (argc < 3) {
-		fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
-		exit(1);
-	}
-
-	if (stat(argv[1], &st) < 0) {
-		perror("stat");
-		exit(2);
-	}
-
-	nblks = (st.st_size + IMGBLK) / IMGBLK;
-
-	bt.bb_magic = htonl(0x0052504F);
-
-	/* If we have the optional entry point parameter, use it */
-	if (argc == 4)
-		bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
-	else
-		bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
-
-	/* We know these from the linker command.
-	 * ...and then move it up into memory a little more so the
-	 * relocation can happen.
-	 */
-	bt.bb_num_512blocks = htonl(nblks);
-	bt.bb_debug_flag = 0;
-
-	bt.bb_checksum = 0;
-
-	/* To be neat and tidy :-).
-	*/
-	bt.reserved[0] = 0;
-	bt.reserved[1] = 0;
-
-	if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
-		perror("zImage open");
-		exit(3);
-	}
-
-	if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
-		perror("bootfile open");
-		exit(3);
-	}
-
-	cksum = 0;
-	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
-		cksum += *cp++;
-	
-	/* Assume zImage is an ELF file, and skip the 64K header.
-	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
-		fprintf(stderr, "%s is too small to be an ELF image\n",
-				argv[1]);
-		exit(4);
-	}
-
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
-		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
-		fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	nblks -= (64 * 1024) / IMGBLK;
-
-	/* And away we go......
-	*/
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image write");
-		exit(5);
-	}
-
-	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
-			perror("zImage read");
-			exit(5);
-		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
-			cksum += *cp++;
-		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-			perror("boot-image write");
-			exit(5);
-		}
-	}
-
-	/* rewrite the header with the computed checksum.
-	*/
-	bt.bb_checksum = htonl(cksum);
-	if (lseek(out_fd, 0, SEEK_SET) < 0) {
-		perror("rewrite seek");
-		exit(1);
-	}
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image rewrite");
-		exit(1);
-	}
-
-	exit(0);
-}
diff --git a/arch/ppc/configs/FADS_defconfig b/arch/ppc/configs/FADS_defconfig
deleted file mode 100644
index c1934f828a4b..000000000000
--- a/arch/ppc/configs/FADS_defconfig
+++ /dev/null
@@ -1,520 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-CONFIG_FADS=y
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-# CONFIG_SERIAL_CPM_ALT_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/IVMS8_defconfig b/arch/ppc/configs/IVMS8_defconfig
deleted file mode 100644
index 66bbefe8e9b3..000000000000
--- a/arch/ppc/configs/IVMS8_defconfig
+++ /dev/null
@@ -1,548 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-CONFIG_IVMS8=y
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-CONFIG_USE_MDIO=y
-CONFIG_FEC_AM79C874=y
-CONFIG_FEC_LXT970=y
-CONFIG_FEC_LXT971=y
-CONFIG_FEC_QS6612=y
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM823L_defconfig b/arch/ppc/configs/TQM823L_defconfig
deleted file mode 100644
index 3b44f3d79bf6..000000000000
--- a/arch/ppc/configs/TQM823L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-CONFIG_TQM823L=y
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM8260_defconfig b/arch/ppc/configs/TQM8260_defconfig
deleted file mode 100644
index 57cfa83d12d9..000000000000
--- a/arch/ppc/configs/TQM8260_defconfig
+++ /dev/null
@@ -1,499 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-CONFIG_TQM8260=y
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-# CONFIG_FCC1_ENET is not set
-CONFIG_FCC2_ENET=y
-# CONFIG_FCC3_ENET is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM850L_defconfig b/arch/ppc/configs/TQM850L_defconfig
deleted file mode 100644
index b02d19630e31..000000000000
--- a/arch/ppc/configs/TQM850L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-CONFIG_TQM850L=y
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM860L_defconfig b/arch/ppc/configs/TQM860L_defconfig
deleted file mode 100644
index 857e4ab28011..000000000000
--- a/arch/ppc/configs/TQM860L_defconfig
+++ /dev/null
@@ -1,549 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-CONFIG_TQM860L=y
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig
deleted file mode 100644
index 41fd3938fa5c..000000000000
--- a/arch/ppc/configs/bamboo_defconfig
+++ /dev/null
@@ -1,944 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 28 15:24:25 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_BAMBOO=y
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_OCOTEA is not set
-CONFIG_440EP=y
-CONFIG_440=y
-CONFIG_IBM440EP_ERR42=y
-CONFIG_IBM_OCP=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/bseip_defconfig b/arch/ppc/configs/bseip_defconfig
deleted file mode 100644
index ce9f9f77f2ee..000000000000
--- a/arch/ppc/configs/bseip_defconfig
+++ /dev/null
@@ -1,517 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-CONFIG_BSEIP=y
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bubinga_defconfig b/arch/ppc/configs/bubinga_defconfig
deleted file mode 100644
index ebec8013102c..000000000000
--- a/arch/ppc/configs/bubinga_defconfig
+++ /dev/null
@@ -1,592 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_BUBINGA=y
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405EP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/chestnut_defconfig b/arch/ppc/configs/chestnut_defconfig
deleted file mode 100644
index e219aad4d0e3..000000000000
--- a/arch/ppc/configs/chestnut_defconfig
+++ /dev/null
@@ -1,794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Fri Mar 11 14:32:49 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-CONFIG_CHESTNUT=y
-# CONFIG_SPRUCE is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MPSC is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/cpci405_defconfig b/arch/ppc/configs/cpci405_defconfig
deleted file mode 100644
index a336ffa8ff41..000000000000
--- a/arch/ppc/configs/cpci405_defconfig
+++ /dev/null
@@ -1,631 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_CPCI405=y
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_405GP=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/cpci690_defconfig b/arch/ppc/configs/cpci690_defconfig
deleted file mode 100644
index ff3f7e02ab0f..000000000000
--- a/arch/ppc/configs/cpci690_defconfig
+++ /dev/null
@@ -1,798 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:10:37 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-CONFIG_CPCI690=y
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ebony_defconfig b/arch/ppc/configs/ebony_defconfig
deleted file mode 100644
index c8deca3b4545..000000000000
--- a/arch/ppc/configs/ebony_defconfig
+++ /dev/null
@@ -1,585 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EBONY=y
-# CONFIG_OCOTEA is not set
-CONFIG_440GP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ep405_defconfig b/arch/ppc/configs/ep405_defconfig
deleted file mode 100644
index 880b5f8d30c3..000000000000
--- a/arch/ppc/configs/ep405_defconfig
+++ /dev/null
@@ -1,572 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-CONFIG_EP405=y
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_EP405PC is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/est8260_defconfig b/arch/ppc/configs/est8260_defconfig
deleted file mode 100644
index b3f6446bb083..000000000000
--- a/arch/ppc/configs/est8260_defconfig
+++ /dev/null
@@ -1,491 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_EST8260=y
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_SCC_ENET=y
-# CONFIG_FEC_ENET is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64260_defconfig b/arch/ppc/configs/ev64260_defconfig
deleted file mode 100644
index 587e9a3b9491..000000000000
--- a/arch/ppc/configs/ev64260_defconfig
+++ /dev/null
@@ -1,758 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Fri Nov 19 11:17:02 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_EV64260=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xfbe00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig
deleted file mode 100644
index f297c4bb632b..000000000000
--- a/arch/ppc/configs/ev64360_defconfig
+++ /dev/null
@@ -1,817 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Fri Oct 28 19:15:34 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_EV64360=y
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xff000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_MV64X60_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/hdpu_defconfig b/arch/ppc/configs/hdpu_defconfig
deleted file mode 100644
index 956a17897e33..000000000000
--- a/arch/ppc/configs/hdpu_defconfig
+++ /dev/null
@@ -1,890 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar 16 12:43:19 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-CONFIG_HDPU=y
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_NR_CPUS is not set
-CONFIG_PREEMPT=y
-CONFIG_HIGHMEM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/nfs ip=auto"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START_BOOL=y
-CONFIG_KERNEL_START=0x80000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/katana_defconfig b/arch/ppc/configs/katana_defconfig
deleted file mode 100644
index 7311fe6b42de..000000000000
--- a/arch/ppc/configs/katana_defconfig
+++ /dev/null
@@ -1,948 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:16:03 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-CONFIG_KATANA=y
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf8100000
-CONFIG_MV64X60_NEW_BASE=0xf8100000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START_BOOL=y
-CONFIG_CONSISTENT_START=0xf0000000
-CONFIG_CONSISTENT_SIZE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00400000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xe0000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-CONFIG_MV643XX_ETH_2=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_M41T00=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/lite5200_defconfig b/arch/ppc/configs/lite5200_defconfig
deleted file mode 100644
index 7e7a943d8cfe..000000000000
--- a/arch/ppc/configs/lite5200_defconfig
+++ /dev/null
@@ -1,436 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_FSL_OCP=y
-CONFIG_PPC_STD_MMU=y
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_LITE5200=y
-CONFIG_PPC_MPC52xx=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 root=/dev/ram0 rw"
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_MPC52xx=y
-CONFIG_SERIAL_MPC52xx_CONSOLE=y
-CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# Misc devices
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-# CONFIG_USB is not set
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Library routines
-#
-# CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_SERIAL_TEXT_DEBUG=y
-CONFIG_PPC_OCP=y
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/lopec_defconfig b/arch/ppc/configs/lopec_defconfig
deleted file mode 100644
index 85ea06b3b5c6..000000000000
--- a/arch/ppc/configs/lopec_defconfig
+++ /dev/null
@@ -1,814 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_LOPEC=y
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_ADMA=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-CONFIG_USB_HID=m
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/luan_defconfig b/arch/ppc/configs/luan_defconfig
deleted file mode 100644
index 71d7bf192e0e..000000000000
--- a/arch/ppc/configs/luan_defconfig
+++ /dev/null
@@ -1,668 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Mon Jan 31 16:26:31 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_LUAN=y
-# CONFIG_OCOTEA is not set
-CONFIG_440SP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mbx_defconfig b/arch/ppc/configs/mbx_defconfig
deleted file mode 100644
index 52c3799e67ba..000000000000
--- a/arch/ppc/configs/mbx_defconfig
+++ /dev/null
@@ -1,512 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-CONFIG_MBX=y
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig
deleted file mode 100644
index d66cacdb95be..000000000000
--- a/arch/ppc/configs/ml300_defconfig
+++ /dev/null
@@ -1,739 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 00:49:20 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_XILINX_ML300=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig
deleted file mode 100644
index 71bcfa7ab7f7..000000000000
--- a/arch/ppc/configs/ml403_defconfig
+++ /dev/null
@@ -1,740 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 01:11:41 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_XILINX_ML300 is not set
-CONFIG_XILINX_ML403=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mvme5100_defconfig b/arch/ppc/configs/mvme5100_defconfig
deleted file mode 100644
index 46776b9c1a33..000000000000
--- a/arch/ppc/configs/mvme5100_defconfig
+++ /dev/null
@@ -1,746 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.9-rc2
-# Wed Sep 22 09:53:26 2004
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-CONFIG_MVME5100=y
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MVME5100_IPMC761_PRESENT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=32
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ocotea_defconfig b/arch/ppc/configs/ocotea_defconfig
deleted file mode 100644
index 9dcf575c706f..000000000000
--- a/arch/ppc/configs/ocotea_defconfig
+++ /dev/null
@@ -1,599 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_OCOTEA=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/pplus_defconfig b/arch/ppc/configs/pplus_defconfig
deleted file mode 100644
index 5e459bcbf591..000000000000
--- a/arch/ppc/configs/pplus_defconfig
+++ /dev/null
@@ -1,720 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-CONFIG_PPLUS=y
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PPCBUG_NVRAM is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_CRC32=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prep_defconfig b/arch/ppc/configs/prep_defconfig
deleted file mode 100644
index b7cee2d71405..000000000000
--- a/arch/ppc/configs/prep_defconfig
+++ /dev/null
@@ -1,1679 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Wed Sep  6 15:09:32 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-prep"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_PREP=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PREP_RESIDUAL=y
-CONFIG_PROC_PREPRESIDUAL=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
-CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=y
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=y
-CONFIG_FB_MATROX_MAVEN=m
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-CONFIG_SND_CS4231_LIB=m
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# Apple Onboard Audio driver
-#
-# CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/prpmc750_defconfig b/arch/ppc/configs/prpmc750_defconfig
deleted file mode 100644
index 82d52f66b742..000000000000
--- a/arch/ppc/configs/prpmc750_defconfig
+++ /dev/null
@@ -1,594 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-CONFIG_PRPMC750=y
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prpmc800_defconfig b/arch/ppc/configs/prpmc800_defconfig
deleted file mode 100644
index 613c2664d3e8..000000000000
--- a/arch/ppc/configs/prpmc800_defconfig
+++ /dev/null
@@ -1,656 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-CONFIG_PRPMC800=y
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_NONMONARCH_SUPPORT is not set
-CONFIG_HARRIER=y
-# CONFIG_HARRIER_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/radstone_ppc7d_defconfig b/arch/ppc/configs/radstone_ppc7d_defconfig
deleted file mode 100644
index 9f64532f2a81..000000000000
--- a/arch/ppc/configs/radstone_ppc7d_defconfig
+++ /dev/null
@@ -1,991 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Tue Jul 26 00:02:09 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-CONFIG_RADSTONE_PPC7D=y
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xfef00000
-CONFIG_MV64X60_NEW_BASE=0xfef00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-CONFIG_R8169=y
-CONFIG_R8169_NAPI=y
-# CONFIG_SKGE is not set
-CONFIG_SK98LIN=y
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-# CONFIG_SERIAL_MPSC_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SENSOR=y
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-CONFIG_SENSORS_LM90=y
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/redwood5_defconfig b/arch/ppc/configs/redwood5_defconfig
deleted file mode 100644
index 4c5486da4139..000000000000
--- a/arch/ppc/configs/redwood5_defconfig
+++ /dev/null
@@ -1,557 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-CONFIG_REDWOOD_5=y
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/redwood6_defconfig b/arch/ppc/configs/redwood6_defconfig
deleted file mode 100644
index 5752845c2601..000000000000
--- a/arch/ppc/configs/redwood6_defconfig
+++ /dev/null
@@ -1,535 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-CONFIG_REDWOOD_6=y
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpx8260_defconfig b/arch/ppc/configs/rpx8260_defconfig
deleted file mode 100644
index a9c4544ae560..000000000000
--- a/arch/ppc/configs/rpx8260_defconfig
+++ /dev/null
@@ -1,555 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-CONFIG_RPX8260=y
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_8260=y
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# CPM2 Options
-#
-# CONFIG_FCC1_ENET is not set
-# CONFIG_FCC2_ENET is not set
-CONFIG_FCC3_ENET=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxcllf_defconfig b/arch/ppc/configs/rpxcllf_defconfig
deleted file mode 100644
index cf932f13fa86..000000000000
--- a/arch/ppc/configs/rpxcllf_defconfig
+++ /dev/null
@@ -1,582 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:04 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_RPXLITE is not set
-CONFIG_RPXCLASSIC=y
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxlite_defconfig b/arch/ppc/configs/rpxlite_defconfig
deleted file mode 100644
index 828dd6eb5b43..000000000000
--- a/arch/ppc/configs/rpxlite_defconfig
+++ /dev/null
@@ -1,581 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:09 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-CONFIG_RPXLITE=y
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
deleted file mode 100644
index 9525e34138fc..000000000000
--- a/arch/ppc/configs/sandpoint_defconfig
+++ /dev/null
@@ -1,737 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-CONFIG_SANDPOINT=y
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_TASKFILE_IO=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_SL82C105=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-# CONFIG_USB_HID is not set
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/spruce_defconfig b/arch/ppc/configs/spruce_defconfig
deleted file mode 100644
index 430dd9c59feb..000000000000
--- a/arch/ppc/configs/spruce_defconfig
+++ /dev/null
@@ -1,577 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-CONFIG_SPRUCE=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_SPRUCE_BAUD_33M=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PCIPS2=y
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sycamore_defconfig b/arch/ppc/configs/sycamore_defconfig
deleted file mode 100644
index 6996cca18f3e..000000000000
--- a/arch/ppc/configs/sycamore_defconfig
+++ /dev/null
@@ -1,663 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-CONFIG_SYCAMORE=y
-# CONFIG_WALNUT is not set
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GPR=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig
deleted file mode 100644
index 1ca0204267b1..000000000000
--- a/arch/ppc/configs/taishan_defconfig
+++ /dev/null
@@ -1,1077 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Mon Feb 12 11:11:58 2007
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_DCR_NATIVE=y
-CONFIG_PPC_DCR=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-CONFIG_WANT_EARLY_SERIAL=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_BAMBOO is not set
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_YUCCA is not set
-# CONFIG_OCOTEA is not set
-CONFIG_TAISHAN=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-CONFIG_PPC4xx_DMA=y
-CONFIG_PPC4xx_EDMA=y
-CONFIG_PPC_GEN550=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_PPC_I8259 is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
-# CONFIG_IBM_EMAC_DEBUG is not set
-CONFIG_IBM_EMAC_ZMII=y
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/walnut_defconfig b/arch/ppc/configs/walnut_defconfig
deleted file mode 100644
index bf9721a7a818..000000000000
--- a/arch/ppc/configs/walnut_defconfig
+++ /dev/null
@@ -1,578 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-CONFIG_WALNUT=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
deleted file mode 100644
index 7b739054968f..000000000000
--- a/arch/ppc/kernel/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-extra-$(CONFIG_PPC_STD_MMU)	:= head.o
-extra-$(CONFIG_40x)		:= head_4xx.o
-extra-$(CONFIG_44x)		:= head_44x.o
-extra-$(CONFIG_8xx)		:= head_8xx.o
-extra-y				+= vmlinux.lds
-
-obj-y				:= entry.o traps.o time.o misc.o \
-					setup.o \
-					ppc_htab.o
-obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-
-ifndef CONFIG_MATH_EMULATION
-obj-$(CONFIG_8xx)		+= softemu8xx.o
-endif
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
deleted file mode 100644
index 8dcbdd6c2d2c..000000000000
--- a/arch/ppc/kernel/asm-offsets.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/suspend.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/vdso_datapage.h>
-
-int
-main(void)
-{
-	DEFINE(THREAD, offsetof(struct task_struct, thread));
-	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(MM, offsetof(struct task_struct, mm));
-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
-	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
-	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
-	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-#endif
-#ifdef CONFIG_ALTIVEC
-	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
-	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
-	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
-	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
-#endif /* CONFIG_ALTIVEC */
-	/* Interrupt register frame */
-	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
-	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
-	/* in fact we only use gpr0 - gpr9 and gpr20 - gpr23 */
-	DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
-	DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
-	DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
-	DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
-	DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
-	DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
-	DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
-	DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
-	DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
-	DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
-	DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
-	DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
-	DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
-	DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
-	DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
-	DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
-	DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
-	DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
-	DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
-	DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
-	DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
-	DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
-	DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
-	DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
-	DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
-	DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
-	DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
-	DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
-	DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
-	DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
-	DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
-	DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
-	/* Note: these symbols include _ because they overlap with special
-	 * register names
-	 */
-	DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
-	DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
-	DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
-	DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
-	DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
-	DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
-	DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
-	DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	/* The PowerPC 400-class & Book-E processors have neither the DAR nor the DSISR
-	 * SPRs. Hence, we overload them to hold the similar DEAR and ESR SPRs
-	 * for such processors.  For critical interrupts we use them to
-	 * hold SRR0 and SRR1.
-	 */
-	DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
-	DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
-	DEFINE(TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
-
-	/* About the CPU features table */
-	DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
-	DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
-	DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
-	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
-	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
-
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
-	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-
-	DEFINE(pbe_address, offsetof(struct pbe, address));
-	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
-	DEFINE(pbe_next, offsetof(struct pbe, next));
-
-	DEFINE(TASK_SIZE, TASK_SIZE);
-	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
-
-	/* datapage offsets for use by vdso */
-	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
-	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
-	DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
-	DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
-	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
-	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
-	DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
-	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
-	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
-	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
-	DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
-	DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
-	DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec));
-	DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
-
-	/* timeval/timezone offsets for use by vdso */
-	DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
-	DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
-
-	/* Other bits used by the vdso */
-	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
-	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
-	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
-	DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
-
-	return 0;
-}
diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S
deleted file mode 100644
index 6a674e834eeb..000000000000
--- a/arch/ppc/kernel/cpu_setup_power4.S
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/ppc_asm.h>
-#include <asm/cputable.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__970_cpu_preinit)
-	/*
-	 * Deal only with PPC970 and PPC970FX.
-	 */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bnelr
-
-	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
-	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
-	 * HID5:DCBZ32_ill
-	 */
-	li	r0,0
-	mfspr	r11,SPRN_HID4
-	rldimi	r11,r0,40,23	/* clear bit 23 (rm_ci) */
-	rldimi	r11,r0,2,61	/* clear bit 61 (lg_pg_en) */
-	sync
-	mtspr	SPRN_HID4,r11
-	isync
-	sync
-	mfspr	r11,SPRN_HID5
-	rldimi	r11,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
-	sync
-	mtspr	SPRN_HID5,r11
-	isync
-	sync
-
-	/* Setup some basic HID1 features */
-	mfspr	r0,SPRN_HID1
-	li	r11,0x1200		/* enable i-fetch cacheability */
-	sldi	r11,r11,44		/* and prefetch */
-	or	r0,r0,r11
-	mtspr	SPRN_HID1,r0
-	mtspr	SPRN_HID1,r0
-	isync
-
-	/* Clear HIOR */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */
-	isync
-	blr
-
-_GLOBAL(__setup_cpu_ppc970)
-	mfspr	r0,SPRN_HID0
-	li	r11,5			/* clear DOZE and SLEEP */
-	rldimi	r0,r11,52,8		/* set NAP and DPM */
-	mtspr	SPRN_HID0,r0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	sync
-	isync
-	blr
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0		0
-#define CS_HID1		8
-#define	CS_HID4		16
-#define CS_HID5		24
-#define CS_SIZE		32
-
-	.data
-	.balign	L1_CACHE_BYTES
-cpu_state_storage:	
-	.space	CS_SIZE
-	.balign	L1_CACHE_BYTES,0
-	.text
-	
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, HID4, etc...
- */
-_GLOBAL(__save_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,cpu_state_storage@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Save HID0,1,4 and 5 */
-	mfspr	r3,SPRN_HID0
-	std	r3,CS_HID0(r5)
-	mfspr	r3,SPRN_HID1
-	std	r3,CS_HID1(r5)
-	mfspr	r3,SPRN_HID4
-	std	r3,CS_HID4(r5)
-	mfspr	r3,SPRN_HID5
-	std	r3,CS_HID5(r5)
-	
-1:
-	mtcr	r7
-	blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,(cpu_state_storage-KERNELBASE)@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Clear interrupt prefix */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0
-	isync
-
-	/* Restore HID0 */
-	ld	r3,CS_HID0(r5)
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	sync
-	isync
-
-	/* Restore HID1 */
-	ld	r3,CS_HID1(r5)
-	sync
-	isync
-	mtspr	SPRN_HID1,r3
-	mtspr	SPRN_HID1,r3
-	sync
-	isync
-	
-	/* Restore HID4 */
-	ld	r3,CS_HID4(r5)
-	sync
-	isync
-	mtspr	SPRN_HID4,r3
-	sync
-	isync
-
-	/* Restore HID5 */
-	ld	r3,CS_HID5(r5)
-	sync
-	isync
-	mtspr	SPRN_HID5,r3
-	sync
-	isync
-1:
-	mtcr	r7
-	blr
-
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
deleted file mode 100644
index 5f3a5d068a5c..000000000000
--- a/arch/ppc/kernel/entry.S
+++ /dev/null
@@ -1,960 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains the system call entry code, context switch
- *  code, and exception/interrupt return code for PowerPC.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sys.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-
-#undef SHOW_SYSCALLS
-#undef SHOW_SYSCALLS_TASK
-
-/*
- * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
- */
-#if MSR_KERNEL >= 0x10000
-#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
-#else
-#define LOAD_MSR_KERNEL(r, x)	li r,(x)
-#endif
-
-#ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
-	.globl	mcheck_transfer_to_handler
-mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
-
-	.globl	debug_transfer_to_handler
-debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
-
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
-	/* fall through */
-#endif
-
-#ifdef CONFIG_40x
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	lwz	r0,crit_r10@l(0)
-	stw	r0,GPR10(r11)
-	lwz	r0,crit_r11@l(0)
-	stw	r0,GPR11(r11)
-	/* fall through */
-#endif
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception, turning
- * on address translation.
- * Note that we rely on the caller having set cr0.eq iff the exception
- * occurred in kernel mode (i.e. MSR:PR = 0).
- */
-	.globl	transfer_to_handler_full
-transfer_to_handler_full:
-	SAVE_NVGPRS(r11)
-	/* fall through */
-
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r2,GPR2(r11)
-	stw	r12,_NIP(r11)
-	stw	r9,_MSR(r11)
-	andi.	r2,r9,MSR_PR
-	mfctr	r12
-	mfspr	r2,SPRN_XER
-	stw	r12,_CTR(r11)
-	stw	r2,_XER(r11)
-	mfspr	r12,SPRN_SPRG3
-	addi	r2,r12,-THREAD
-	tovirt(r2,r2)			/* set r2 to current */
-	beq	2f			/* if from user, fix up THREAD.regs */
-	addi	r11,r1,STACK_FRAME_OVERHEAD
-	stw	r11,PT_REGS(r12)
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	/* Check to see if the dbcr0 register is set up to debug.  Use the
-	   single-step bit to do this. */
-	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IC@h
-	beq+	3f
-	/* From user and task is ptraced - load up global dbcr0 */
-	li	r12,-1			/* clear all pending debug events */
-	mtspr	SPRN_DBSR,r12
-	lis	r11,global_dbcr0@ha
-	tophys(r11,r11)
-	addi	r11,r11,global_dbcr0@l
-	lwz	r12,0(r11)
-	mtspr	SPRN_DBCR0,r12
-	lwz	r12,4(r11)
-	addi	r12,r12,-1
-	stw	r12,4(r11)
-#endif
-	b	3f
-
-2:	/* if from kernel, check interrupted DOZE/NAP mode and
-         * check for stack overflow
-         */
-	lwz	r9,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r9			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
-5:
-#ifdef CONFIG_6xx
-	tophys(r9,r9)			/* check local flags */
-	lwz	r12,TI_LOCAL_FLAGS(r9)
-	mtcrf	0x01,r12
-	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
-	.globl transfer_to_handler_cont
-transfer_to_handler_cont:
-3:
-	mflr	r9
-	lwz	r11,0(r9)		/* virtual address of handler */
-	lwz	r9,4(r9)		/* where to go when done */
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r10
-	mtlr	r9
-	SYNC
-	RFI				/* jump to handler, enable MMU */
-
-#ifdef CONFIG_6xx
-4:	rlwinm	r12,r12,0,~_TLF_NAPPING
-	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
-#endif
-
-/*
- * On kernel stack overflow, load up an initial stack pointer
- * and call StackOverflow(regs), which should not return.
- */
-stack_ovf:
-	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r12,_end@h
-	ori	r12,r12,_end@l
-	cmplw	r1,r12
-	ble	5b			/* r1 <= &_end is OK */
-	SAVE_NVGPRS(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	lis	r9,StackOverflow@ha
-	addi	r9,r9,StackOverflow@l
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	FIX_SRR1(r10,r12)
-	mtspr	SPRN_SRR0,r9
-	mtspr	SPRN_SRR1,r10
-	SYNC
-	RFI
-
-/*
- * Handle a system call.
- */
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"entry.S",N_SO,0,0,0f
-0:
-
-_GLOBAL(DoSyscall)
-	stw	r3,ORIG_GPR3(r1)
-	li	r12,0
-	stw	r12,RESULT(r1)
-	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
-	rlwinm	r11,r11,0,4,2
-	stw	r11,_CCR(r1)
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall
-#endif /* SHOW_SYSCALLS */
-	rlwinm	r10,r1,0,0,18	/* current_thread_info() */
-	lwz	r11,TI_FLAGS(r10)
-	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
-	bne-	syscall_dotrace
-syscall_dotrace_cont:
-	cmplwi	0,r0,NR_syscalls
-	lis	r10,sys_call_table@h
-	ori	r10,r10,sys_call_table@l
-	slwi	r0,r0,2
-	bge-	66f
-	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
-	mtlr	r10
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-	PPC440EP_ERR42
-	blrl			/* Call handler */
-	.globl	ret_from_syscall
-ret_from_syscall:
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall_exit
-#endif
-	mr	r6,r3
-	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
-	/* disable interrupts so current_thread_info()->flags can't change */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)
-	lwz	r9,TI_FLAGS(r12)
-	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
-	bne-	syscall_exit_work
-	cmplw	0,r3,r8
-	blt+	syscall_exit_cont
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-syscall_exit_cont:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* If the process has its own DBCR0 value, load it up.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	bne-	2f
-1:
-#endif /* CONFIG_44x */
-BEGIN_FTR_SECTION
-	lwarx	r7,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-	lwz	r4,_LINK(r1)
-	lwz	r5,_CCR(r1)
-	mtlr	r4
-	mtcr	r5
-	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
-	FIX_SRR1(r8, r0)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
-	SYNC
-	RFI
-#ifdef CONFIG_44x
-2:	li	r7,0
-	iccci	r0,r0
-	stw	r7,icache_44x_need_flush@l(r4)
-	b	1b
-#endif  /* CONFIG_44x */
-
-66:	li	r3,-ENOSYS
-	b	ret_from_syscall
-
-	.globl	ret_from_fork
-ret_from_fork:
-	REST_NVGPRS(r1)
-	bl	schedule_tail
-	li	r3,0
-	b	ret_from_syscall
-
-/* Traced system call support */
-syscall_dotrace:
-	SAVE_NVGPRS(r1)
-	li	r0,0xc00
-	stw	r0,TRAP(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	REST_NVGPRS(r1)
-	b	syscall_dotrace_cont
-
-syscall_exit_work:
-	andi.	r0,r9,_TIF_RESTOREALL
-	beq+	0f
-	REST_NVGPRS(r1)
-	b	2f
-0:	cmplw	0,r3,r8
-	blt+	1f
-	andi.	r0,r9,_TIF_NOERROR
-	bne-	1f
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-
-1:	stw	r6,RESULT(r1)	/* Save result */
-	stw	r3,GPR3(r1)	/* Update return value */
-2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
-	beq	4f
-
-	/* Clear per-syscall TIF flags if any are set.  */
-
-	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
-3:	lwarx	r8,0,r12
-	andc	r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
-	dcbt	0,r12
-#endif
-	stwcx.	r8,0,r12
-	bne-	3b
-	subi	r12,r12,TI_FLAGS
-	
-4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	ret_from_except
-
-	/* Re-enable interrupts */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	/* Save NVGPRS if they're not saved already */
-	lwz	r4,TRAP(r1)
-	andi.	r4,r4,1
-	beq	5f
-	SAVE_NVGPRS(r1)
-	li	r4,0xc00
-	stw	r4,TRAP(r1)
-5:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_leave
-	b	ret_from_except_full
-
-#ifdef SHOW_SYSCALLS
-do_show_syscall:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	lis	r3,7f@ha
-	addi	r3,r3,7f@l
-	lwz	r4,GPR0(r1)
-	lwz	r5,GPR3(r1)
-	lwz	r6,GPR4(r1)
-	lwz	r7,GPR5(r1)
-	lwz	r8,GPR6(r1)
-	lwz	r9,GPR7(r1)
-	bl	printk
-	lis	r3,77f@ha
-	addi	r3,r3,77f@l
-	lwz	r4,GPR8(r1)
-	mr	r5,r2
-	bl	printk
-	lwz	r0,GPR0(r1)
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-do_show_syscall_exit:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	stw	r3,RESULT(r1)	/* Save result */
-	mr	r4,r3
-	lis	r3,79f@ha
-	addi	r3,r3,79f@l
-	bl	printk
-	lwz	r3,RESULT(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-7:	.string	"syscall %d(%x, %x, %x, %x, %x, "
-77:	.string	"%x), current=%p\n"
-79:	.string	" -> %x\n"
-	.align	2,0
-
-#ifdef SHOW_SYSCALLS_TASK
-	.data
-	.globl	show_syscalls_task
-show_syscalls_task:
-	.long	-1
-	.text
-#endif
-#endif /* SHOW_SYSCALLS */
-
-/*
- * The fork/clone functions need to copy the full register set into
- * the child process. Therefore we need to save all the nonvolatile
- * registers (r13 - r31) before calling the C code.
- */
-	.globl	ppc_fork
-ppc_fork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_fork
-
-	.globl	ppc_vfork
-ppc_vfork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_vfork
-
-	.globl	ppc_clone
-ppc_clone:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_clone
-
-	.globl	ppc_swapcontext
-ppc_swapcontext:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_swapcontext
-
-/*
- * Top-level page fault handling.
- * This is in assembler because if do_page_fault tells us that
- * it is a bad kernel page fault, we want to save the non-volatile
- * registers before calling bad_page_fault.
- */
-	.globl	handle_page_fault
-handle_page_fault:
-	stw	r4,_DAR(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_page_fault
-	cmpwi	r3,0
-	beq+	ret_from_except
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	clrrwi	r0,r0,1
-	stw	r0,TRAP(r1)
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
-	bl	bad_page_fault
-	b	ret_from_except_full
-
-/*
- * This routine switches between two different tasks.  The process
- * state of one is saved on its kernel stack.  Then the state
- * of the other is restored from its kernel stack.  The memory
- * management hardware is updated to the second process's state.
- * Finally, we can return to the second process.
- * On entry, r3 points to the THREAD for the current task, r4
- * points to the THREAD for the new task.
- *
- * This routine is always called with interrupts disabled.
- *
- * Note: there are two ways to get to the "going out" portion
- * of this code; either by coming in via the entry (_switch)
- * or via "fork" which must set up an environment equivalent
- * to the "_switch" path.  If you change this , you'll have to
- * change the fork code also.
- *
- * The code which creates the new task context is in 'copy_thread'
- * in arch/ppc/kernel/process.c
- */
-_GLOBAL(_switch)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	/* r3-r12 are caller saved -- Cort */
-	SAVE_NVGPRS(r1)
-	stw	r0,_NIP(r1)	/* Return to switch caller */
-	mfmsr	r11
-	li	r0,MSR_FP	/* Disable floating-point */
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
-	mfspr	r12,SPRN_VRSAVE	/* save vrsave register value */
-	stw	r12,THREAD+THREAD_VRSAVE(r2)
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	and.	r0,r0,r11	/* FP or altivec enabled? */
-	beq+	1f
-	andc	r11,r11,r0
-	MTMSRD(r11)
-	isync
-1:	stw	r11,_MSR(r1)
-	mfcr	r10
-	stw	r10,_CCR(r1)
-	stw	r1,KSP(r3)	/* Set old stack pointer */
-
-#ifdef CONFIG_SMP
-	/* We need a sync somewhere here to make sure that if the
-	 * previous task gets rescheduled on another CPU, it sees all
-	 * stores it has performed on this one.
-	 */
-	sync
-#endif /* CONFIG_SMP */
-
-	tophys(r0,r4)
-	CLR_TOP32(r0)
-	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
-	lwz	r1,KSP(r4)	/* Load new stack pointer */
-
-	/* save the old current 'last' for return value */
-	mr	r3,r2
-	addi	r2,r4,-THREAD	/* Update current */
-
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	lwz	r0,THREAD+THREAD_VRSAVE(r2)
-	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	lwz	r0,_CCR(r1)
-	mtcrf	0xFF,r0
-	/* r3-r12 are destroyed -- Cort */
-	REST_NVGPRS(r1)
-
-	lwz	r4,_NIP(r1)	/* Return to _switch caller in new task */
-	mtlr	r4
-	addi	r1,r1,INT_FRAME_SIZE
-	blr
-
-	.globl	fast_exception_return
-fast_exception_return:
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	andi.	r10,r9,MSR_RI		/* check for recoverable interrupt */
-	beq	1f			/* if not, we've got problems */
-#endif
-
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	SYNC
-	RFI
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-/* check if the exception happened in a restartable section */
-1:	lis	r3,exc_exit_restart_end@ha
-	addi	r3,r3,exc_exit_restart_end@l
-	cmplw	r12,r3
-	bge	3f
-	lis	r4,exc_exit_restart@ha
-	addi	r4,r4,exc_exit_restart@l
-	cmplw	r12,r4
-	blt	3f
-	lis	r3,fee_restarts@ha
-	tophys(r3,r3)
-	lwz	r5,fee_restarts@l(r3)
-	addi	r5,r5,1
-	stw	r5,fee_restarts@l(r3)
-	mr	r12,r4		/* restart at exc_exit_restart */
-	b	2b
-
-	.section .bss
-	.align	2
-fee_restarts:
-	.space	4
-	.previous
-
-/* aargh, a nonrecoverable interrupt, panic */
-/* aargh, we don't know which trap this is */
-/* but the 601 doesn't implement the RI bit, so assume it's OK */
-3:
-BEGIN_FTR_SECTION
-	b	2b
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	li	r10,-1
-	stw	r10,TRAP(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r10,MSR_KERNEL@h
-	ori	r10,r10,MSR_KERNEL@l
-	bl	transfer_to_handler_full
-	.long	nonrecoverable_exception
-	.long	ret_from_except
-#endif
-
-	.globl	ret_from_except_full
-ret_from_except_full:
-	REST_NVGPRS(r1)
-	/* fall through */
-
-	.globl	ret_from_except
-ret_from_except:
-	/* Hard-disable interrupts so that current_thread_info()->flags
-	 * can't change between when we test it and when we return
-	 * from the interrupt. */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC			/* Some chip revs have problems here... */
-	MTMSRD(r10)		/* disable interrupts */
-
-	lwz	r3,_MSR(r1)	/* Returning to user mode? */
-	andi.	r0,r3,MSR_PR
-	beq	resume_kernel
-
-user_exc_return:		/* r10 contains MSR_KERNEL here */
-	/* Check current_thread_info()->flags */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
-	bne	do_work
-
-restore_user:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* Check whether this process has its own DBCR0 value.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-
-#ifdef CONFIG_PREEMPT
-	b	restore
-
-/* N.B. the only way to get here is from the beq following ret_from_except. */
-resume_kernel:
-	/* check current_thread_info->preempt_count */
-	rlwinm	r9,r1,0,0,18
-	lwz	r0,TI_PREEMPT(r9)
-	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
-	bne	restore
-	lwz	r0,TI_FLAGS(r9)
-	andi.	r0,r0,_TIF_NEED_RESCHED
-	beq+	restore
-	andi.	r0,r3,MSR_EE	/* interrupts off? */
-	beq	restore		/* don't schedule if so */
-1:	bl	preempt_schedule_irq
-	rlwinm	r9,r1,0,0,18
-	lwz	r3,TI_FLAGS(r9)
-	andi.	r0,r3,_TIF_NEED_RESCHED
-	bne-	1b
-#else
-resume_kernel:
-#endif /* CONFIG_PREEMPT */
-
-	/* interrupts are hard-disabled at this point */
-restore:
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	beq+	1f
-	li	r6,0
-	iccci	r0,r0
-	stw	r6,icache_44x_need_flush@l(r4)
-1:
-#endif  /* CONFIG_44x */
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	REST_4GPRS(3, r1)
-	REST_2GPRS(7, r1)
-
-	lwz	r10,_XER(r1)
-	lwz	r11,_CTR(r1)
-	mtspr	SPRN_XER,r10
-	mtctr	r11
-
-	PPC405_ERR77(0,r1)
-BEGIN_FTR_SECTION
-	lwarx	r11,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
-	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
-	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
-
-	lwz	r10,_CCR(r1)
-	lwz	r11,_LINK(r1)
-	mtcrf	0xFF,r10
-	mtlr	r11
-
-	/*
-	 * Once we put values in SRR0 and SRR1, we are in a state
-	 * where exceptions are not recoverable, since taking an
-	 * exception will trash SRR0 and SRR1.  Therefore we clear the
-	 * MSR:RI bit to indicate this.  If we do take an exception,
-	 * we can't return to the point of the exception but we
-	 * can restart the exception exit path at the label
-	 * exc_exit_restart below.  -- paulus
-	 */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
-	SYNC
-	MTMSRD(r10)		/* clear the RI bit */
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r9,_MSR(r1)
-	lwz	r12,_NIP(r1)
-	FIX_SRR1(r9,r10)
-	mtspr	SPRN_SRR0,r12
-	mtspr	SPRN_SRR1,r9
-	REST_4GPRS(9, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	SYNC
-	RFI
-
-#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
-	/*
-	 * This is a bit different on 4xx/Book-E because it doesn't have
-	 * the RI bit in the MSR.
-	 * The TLB miss handler checks if we have interrupted
-	 * the exception exit path and restarts it if so
-	 * (well maybe one day it will... :).
-	 */
-	lwz	r11,_LINK(r1)
-	mtlr	r11
-	lwz	r10,_CCR(r1)
-	mtcrf	0xff,r10
-	REST_2GPRS(9, r1)
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r11,_NIP(r1)
-	lwz	r12,_MSR(r1)
-exc_exit_start:
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	REST_2GPRS(11, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	PPC405_ERR77_SYNC
-	rfi
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * Returning from a critical interrupt in user mode doesn't need
- * to be any different from a normal exception.  For a critical
- * interrupt in the kernel, we just return (without checking for
- * preemption) since the interrupt may have happened at some crucial
- * place (e.g. inside the TLB miss handler), and because we will be
- * running with r1 pointing into critical_stack, not the current
- * process's kernel stack (and therefore current_thread_info() will
- * give the wrong answer).
- * We have to restore various SPRs that may have been in use at the
- * time of the critical interrupt.
- *
- */
-#ifdef CONFIG_40x
-#define PPC_40x_TURN_OFF_MSR_DR						    \
-	/* avoid any possible TLB misses here by turning off MSR.DR, we	    \
-	 * assume the instructions here are mapped by a pinned TLB entry */ \
-	li	r10,MSR_IR;						    \
-	mtmsr	r10;							    \
-	isync;								    \
-	tophys(r1, r1);
-#else
-#define PPC_40x_TURN_OFF_MSR_DR
-#endif
-
-#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi)	\
-	REST_NVGPRS(r1);						\
-	lwz	r3,_MSR(r1);						\
-	andi.	r3,r3,MSR_PR;						\
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL);				\
-	bne	user_exc_return;					\
-	lwz	r0,GPR0(r1);						\
-	lwz	r2,GPR2(r1);						\
-	REST_4GPRS(3, r1);						\
-	REST_2GPRS(7, r1);						\
-	lwz	r10,_XER(r1);						\
-	lwz	r11,_CTR(r1);						\
-	mtspr	SPRN_XER,r10;						\
-	mtctr	r11;							\
-	PPC405_ERR77(0,r1);						\
-	stwcx.	r0,0,r1;		/* to clear the reservation */	\
-	lwz	r11,_LINK(r1);						\
-	mtlr	r11;							\
-	lwz	r10,_CCR(r1);						\
-	mtcrf	0xff,r10;						\
-	PPC_40x_TURN_OFF_MSR_DR;					\
-	lwz	r9,_DEAR(r1);						\
-	lwz	r10,_ESR(r1);						\
-	mtspr	SPRN_DEAR,r9;						\
-	mtspr	SPRN_ESR,r10;						\
-	lwz	r11,_NIP(r1);						\
-	lwz	r12,_MSR(r1);						\
-	mtspr	exc_lvl_srr0,r11;					\
-	mtspr	exc_lvl_srr1,r12;					\
-	lwz	r9,GPR9(r1);						\
-	lwz	r12,GPR12(r1);						\
-	lwz	r10,GPR10(r1);						\
-	lwz	r11,GPR11(r1);						\
-	lwz	r1,GPR1(r1);						\
-	PPC405_ERR77_SYNC;						\
-	exc_lvl_rfi;							\
-	b	.;		/* prevent prefetch past exc_lvl_rfi */
-
-	.globl	ret_from_crit_exc
-ret_from_crit_exc:
-	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
-
-#ifdef CONFIG_BOOKE
-	.globl	ret_from_debug_exc
-ret_from_debug_exc:
-	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
-
-	.globl	ret_from_mcheck_exc
-ret_from_mcheck_exc:
-	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
-#endif /* CONFIG_BOOKE */
-
-/*
- * Load the DBCR0 value for a task that is being ptraced,
- * having first saved away the global DBCR0.  Note that r0
- * has the dbcr0 value to set upon entry to this.
- */
-load_dbcr0:
-	mfmsr	r10		/* first disable debug exceptions */
-	rlwinm	r10,r10,0,~MSR_DE
-	mtmsr	r10
-	isync
-	mfspr	r10,SPRN_DBCR0
-	lis	r11,global_dbcr0@ha
-	addi	r11,r11,global_dbcr0@l
-	stw	r10,0(r11)
-	mtspr	SPRN_DBCR0,r0
-	lwz	r10,4(r11)
-	addi	r10,r10,1
-	stw	r10,4(r11)
-	li	r11,-1
-	mtspr	SPRN_DBSR,r11	/* clear all pending debug events */
-	blr
-
-	.section .bss
-	.align	4
-global_dbcr0:
-	.space	8
-	.previous
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
-
-do_work:			/* r10 contains MSR_KERNEL here */
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	beq	do_user_signal
-
-do_resched:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	bl	schedule
-recheck:
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC
-	MTMSRD(r10)		/* disable interrupts */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING
-	beq	restore_user
-do_user_signal:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	/* save r13-r31 in the exception frame, if not already done */
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	2f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
-	bl	do_signal
-	REST_NVGPRS(r1)
-	b	recheck
-
-/*
- * We come here when we are at the end of handling an exception
- * that occurred at a place where taking an exception will lose
- * state information, such as the contents of SRR0 and SRR1.
- */
-nonrecoverable:
-	lis	r10,exc_exit_restart_end@ha
-	addi	r10,r10,exc_exit_restart_end@l
-	cmplw	r12,r10
-	bge	3f
-	lis	r11,exc_exit_restart@ha
-	addi	r11,r11,exc_exit_restart@l
-	cmplw	r12,r11
-	blt	3f
-	lis	r10,ee_restarts@ha
-	lwz	r12,ee_restarts@l(r10)
-	addi	r12,r12,1
-	stw	r12,ee_restarts@l(r10)
-	mr	r12,r11		/* restart at exc_exit_restart */
-	blr
-3:	/* OK, we can't recover, kill this process */
-	/* but the 601 doesn't implement the RI bit, so assume it's OK */
-BEGIN_FTR_SECTION
-	blr
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	4f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-4:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	nonrecoverable_exception
-	/* shouldn't return */
-	b	4b
-
-	.section .bss
-	.align	2
-ee_restarts:
-	.space	4
-	.previous
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
deleted file mode 100644
index e7e642b95138..000000000000
--- a/arch/ppc/kernel/head.S
+++ /dev/null
@@ -1,1220 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC platform, including trap and interrupt dispatch.
- *  (The PPC 8xx embedded CPUs use head_8xx.S instead.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
-#define LOAD_BAT(n, reg, RA, RB)	\
-	/* see the comment for clear_bats() -- Cort */ \
-	li	RA,0;			\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	lwz	RA,(n*16)+0(reg);	\
-	lwz	RB,(n*16)+4(reg);	\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_IBAT##n##L,RB;	\
-	beq	1f;			\
-	lwz	RA,(n*16)+8(reg);	\
-	lwz	RB,(n*16)+12(reg);	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##L,RB;	\
-1:
-
-	.text
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"head.S",N_SO,0,0,0f
-0:
-	.globl	_stext
-_stext:
-
-/*
- * _start is defined this way because the XCOFF loader in the OpenFirmware
- * on the powermac expects the entry point to be a procedure descriptor.
- */
-	.text
-	.globl	_start
-_start:
-	/*
-	 * These are here for legacy reasons, the kernel used to
-	 * need to look like a coff function entry for the pmac
-	 * but we're always started by some kind of bootloader now.
-	 *  -- Cort
-	 */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop
-
-/* PMAC
- * Enter here with the kernel text, data and bss loaded starting at
- * 0, running with virtual == physical mapping.
- * r5 points to the prom entry point (the client interface handler
- * address).  Address translation is turned on, with the prom
- * managing the hash table.  Interrupts are disabled.  The stack
- * pointer (r1) points to just below the end of the half-meg region
- * from 0x380000 - 0x400000, which is mapped in already.
- *
- * If we are booted from MacOS via BootX, we enter with the kernel
- * image loaded somewhere, and the following values in registers:
- *  r3: 'BooX' (0x426f6f58)
- *  r4: virtual address of boot_infos_t
- *  r5: 0
- *
- * APUS
- *   r3: 'APUS'
- *   r4: physical address of memory base
- *   Linux/m68k style BootInfo structure at &_end.
- *
- * PREP
- * This is jumped to on prep systems right after the kernel is relocated
- * to its proper place in memory by the boot loader.  The expected layout
- * of the regs is:
- *   r3: ptr to residual data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * This just gets a minimal mmu environment setup so we can call
- * start_here() to do the real work.
- * -- Cort
- */
-
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0			/* cpu # */
-
-/*
- * early_init() does the early machine identification and does
- * the necessary low-level setup and clears the BSS
- *  -- Cort <cort@fsmlabs.com>
- */
-	bl	early_init
-
-/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
- * the physical address we are running at, returned by early_init()
- */
- 	bl	mmu_off
-__after_mmu_off:
-	bl	clear_bats
-	bl	flush_tlbs
-
-	bl	initial_bats
-#ifdef CONFIG_BOOTX_TEXT
-	bl	setup_disp_bat
-#endif
-
-/*
- * Call setup_cpu for CPU 0 and initialize 6xx Idle
- */
-	bl	reloc_offset
-	li	r24,0			/* cpu# */
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	bl	reloc_offset
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-
-/*
- * We need to run with _start at physical address 0.
- * If the MMU is already turned on, we copy stuff to KERNELBASE,
- * otherwise we copy it to 0.
- */
-	bl	reloc_offset
-	mr	r26,r3
-	addis	r4,r3,KERNELBASE@h	/* current address of _start */
-	cmpwi	0,r4,0			/* are we already running at 0? */
-	bne	relocate_kernel
-
-/*
- * we now have the 1st 16M of ram mapped with the bats.
- * prep needs the mmu to be turned on here, but pmac already has it on.
- * this shouldn't bother the pmac since it just gets turned on again
- * as we jump to our code at KERNELBASE. -- Cort
- * Actually no, pmac doesn't have it on any more. BootX enters with MMU
- * off, and in other cases, we now turn it off before changing BATs above.
- */
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	RFI				/* enables MMU */
-
-/*
- * We need __secondary_hold as a place to hold the other cpus on
- * an SMP machine, even when we are running a UP kernel.
- */
-	. = 0xc0			/* for prep bootloader */
-	li	r3,1			/* MTX only has 1 cpu */
-	.globl	__secondary_hold
-__secondary_hold:
-	/* tell the master we're here */
-	stw	r3,4(0)
-#ifdef CONFIG_SMP
-100:	lwz	r4,0(0)
-	/* wait until we're told to start */
-	cmpw	0,r4,r3
-	bne	100b
-	/* our cpu # was at addr 0 - go */
-	mr	r24,r3			/* cpu # */
-	b	__secondary_start
-#else
-	b	.
-#endif /* CONFIG_SMP */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-/* core99 pmac starts the seconary here by changing the vector, and
-   putting it back to what it was (unknown_exception) when done.  */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-	mtspr	SPRN_SPRG0,r10
-	mtspr	SPRN_SPRG1,r11
-	mfcr	r10
-	EXCEPTION_PROLOG_1
-7:	EXCEPTION_PROLOG_2
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception. */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	andis.	r0,r10,0xa470		/* weird error? */
-	bne	1f			/* if not, try to put a PTE */
-	mfspr	r4,SPRN_DAR		/* into the hash table */
-	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
-	bl	hash_page
-1:	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception. */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	andis.	r0,r9,0x4000		/* no pte found? */
-	beq	1f			/* if so, try to put a PTE */
-	li	r3,0			/* into the hash table */
-	mr	r4,r12			/* SRR0 is fault address */
-	bl	hash_page
-1:	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* Floating-point unavailable */
-	. = 0x800
-FPUnavailable:
-	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-
-/*
- * The Altivec unavailable trap is at 0x0f20.  Foo.
- * We effectively remap it to 0x3000.
- * We include an altivec unavailable exception vector even if
- * not configured for Altivec, so that you can't panic a
- * non-altivec kernel running on a machine with altivec just
- * by executing an altivec instruction.
- */
-	. = 0xf00
-	b	Trap_0f
-
-	. = 0xf20
-	b	AltiVecUnavailable
-
-Trap_0f:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0xf00, unknown_exception)
-
-/*
- * Handle TLB miss for instruction on 603/603e.
- * Note: we get an alternate set of r0 - r3 to use automatically.
- */
-	. = 0x1000
-InstructionTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_IMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	InstructionAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	InstructionAddressInvalid /* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_IMISS
-	tlbli	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-InstructionAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1	/* (shouldn't be needed) */
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	or	r2,r2,r1
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_IMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	rlwimi	r2,r2,1,30,30	/* change 1 -> 3 */
-	xor	r1,r1,r2
-	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	InstructionAccess
-
-/*
- * Handle TLB miss for DATA Load operation on 603/603e
- */
-	. = 0x1100
-DataLoadTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-DataAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_DMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	beq	20f		/* Jump if big endian */
-	xori	r1,r1,3
-20:	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	DataAccess
-
-/*
- * Handle TLB miss for DATA Store on 603/603e
- */
-	. = 0x1200
-DataStoreTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	li	r1,0xe15		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? 2: 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-
-#ifndef CONFIG_ALTIVEC
-#define altivec_assist_exception	unknown_exception
-#endif
-
-	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
-	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
-
-	.globl mol_trampoline
-	.set mol_trampoline, i0x2f00
-
-	. = 0x3000
-
-AltiVecUnavailable:
-	EXCEPTION_PROLOG
-#ifdef CONFIG_ALTIVEC
-	bne	load_up_altivec		/* if from user, just load it up */
-#endif /* CONFIG_ALTIVEC */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
-
-/*
- * This code is jumped to from the startup code to copy
- * the kernel image to physical address 0.
- */
-relocate_kernel:
-	addis	r9,r26,klimit@ha	/* fetch klimit */
-	lwz	r25,klimit@l(r9)
-	addis	r25,r25,-KERNELBASE@h
-	li	r3,0			/* Destination base address */
-	li	r6,0			/* Destination offset */
-	li	r5,0x4000		/* # bytes of memory to copy */
-	bl	copy_and_flush		/* copy the first 0x4000 bytes */
-	addi	r0,r3,4f@l		/* jump to the address of 4f */
-	mtctr	r0			/* in copy and do the rest. */
-	bctr				/* jump to the copy */
-4:	mr	r5,r25
-	bl	copy_and_flush		/* copy the rest */
-	b	turn_on_mmu
-
-/*
- * Copy routine used to copy the kernel to start at physical address 0
- * and flush and invalidate the caches as needed.
- * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
- * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
- */
-copy_and_flush:
-	addi	r5,r5,-4
-	addi	r6,r6,-4
-4:	li	r0,L1_CACHE_BYTES/4
-	mtctr	r0
-3:	addi	r6,r6,4			/* copy a cache line */
-	lwzx	r0,r6,r4
-	stwx	r0,r6,r3
-	bdnz	3b
-	dcbst	r6,r3			/* write it to memory */
-	sync
-	icbi	r6,r3			/* flush the icache line */
-	cmplw	0,r6,r5
-	blt	4b
-	sync				/* additional sync needed on g4 */
-	isync
-	addi	r5,r5,4
-	addi	r6,r6,4
-	blr
-
-#ifdef CONFIG_SMP
-	.globl	__secondary_start_pmac_0
-__secondary_start_pmac_0:
-	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
-	li	r24,0
-	b	1f
-	li	r24,1
-	b	1f
-	li	r24,2
-	b	1f
-	li	r24,3
-1:
-	/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
-	   set to map the 0xf0000000 - 0xffffffff region */
-	mfmsr	r0
-	rlwinm	r0,r0,0,28,26		/* clear DR (0x10) */
-	SYNC
-	mtmsr	r0
-	isync
-
-	.globl	__secondary_start
-__secondary_start:
-	/* Copy some CPU settings from CPU 0 */
-	bl	__restore_cpu_setup
-
-	lis	r3,-KERNELBASE@h
-	mr	r4,r24
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	lis	r3,-KERNELBASE@h
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-	/* get current_thread_info and current */
-	lis	r1,secondary_ti@ha
-	tophys(r1,r1)
-	lwz	r1,secondary_ti@l(r1)
-	tophys(r2,r1)
-	lwz	r2,TI_TASK(r2)
-
-	/* stack */
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	li	r0,0
-	tophys(r3,r1)
-	stw	r0,0(r3)
-
-	/* load up the MMU */
-	bl	load_up_mmu
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* phys address of our thread_struct */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* enable MMU and jump to start_secondary */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_secondary@h
-	ori	r3,r3,start_secondary@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-#endif /* CONFIG_SMP */
-
-/*
- * Those generic dummy functions are kept for CPUs not
- * included in CONFIG_6xx
- */
-#if !defined(CONFIG_6xx)
-_GLOBAL(__save_cpu_setup)
-	blr
-_GLOBAL(__restore_cpu_setup)
-	blr
-#endif /* !defined(CONFIG_6xx) */
-
-
-/*
- * Load stuff into the MMU.  Intended to be called with
- * IR=0 and DR=0.
- */
-load_up_mmu:
-	sync			/* Force all PTE updates to finish */
-	isync
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-	/* Load the SDR1 register (hash table base & size) */
-	lis	r6,_SDR1@ha
-	tophys(r6,r6)
-	lwz	r6,_SDR1@l(r6)
-	mtspr	SPRN_SDR1,r6
-	li	r0,16		/* load up segment register values */
-	mtctr	r0		/* for context 0 */
-	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
-	li	r4,0
-3:	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* increment VSID */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-
-/* Load the BAT registers with the values set up by MMU_init.
-   MMU_init takes care of whether we're on a 601 or not. */
-	mfpvr	r3
-	srwi	r3,r3,16
-	cmpwi	r3,1
-	lis	r3,BATS@ha
-	addi	r3,r3,BATS@l
-	tophys(r3,r3)
-	LOAD_BAT(0,r3,r4,r5)
-	LOAD_BAT(1,r3,r4,r5)
-	LOAD_BAT(2,r3,r4,r5)
-	LOAD_BAT(3,r3,r4,r5)
-
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-	/* Set up for using our exception vectors */
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-/*
- * Do early bootinfo parsing, platform-specific initialization,
- * and set up the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * for SDR1 (hash table pointer) and the segment registers
- * and change to using our exception vectors.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	FIX_SRR1(r3,r5)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	SYNC
-	RFI
-/* Load up the kernel context */
-2:	bl	load_up_mmu
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Add helper information for the Abatron bdiGDB debugger.
-	 * We do this here because we know the mmu is disabled, and
-	 * will be enabled for real in just a few instructions.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* This much match your Abatron config */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r5, r5)
-	stw	r6, 0(r5)
-#endif /* CONFIG_BDI_SWITCH */
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-
-/*
- * Set up the segment registers for a new context.
- */
-_GLOBAL(set_context)
-	mulli	r3,r3,897	/* multiply context by skew factor */
-	rlwinm	r3,r3,4,8,27	/* VSID = (context & 0xfffff) << 4 */
-	addis	r3,r3,0x6000	/* Set Ks, Ku bits */
-	li	r0,NUM_USER_SEGMENTS
-	mtctr	r0
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	li	r4,0
-	isync
-3:
-	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* next VSID */
-	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-	sync
-	isync
-	blr
-
-/*
- * An undocumented "feature" of 604e requires that the v bit
- * be cleared before changing BAT values.
- *
- * Also, newer IBM firmware does not clear bat3 and 4 so
- * this makes sure it's done.
- *  -- Cort
- */
-clear_bats:
-	li	r10,0
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	r9, 1
-	beq	1f
-
-	mtspr	SPRN_DBAT0U,r10
-	mtspr	SPRN_DBAT0L,r10
-	mtspr	SPRN_DBAT1U,r10
-	mtspr	SPRN_DBAT1L,r10
-	mtspr	SPRN_DBAT2U,r10
-	mtspr	SPRN_DBAT2L,r10
-	mtspr	SPRN_DBAT3U,r10
-	mtspr	SPRN_DBAT3L,r10
-1:
-	mtspr	SPRN_IBAT0U,r10
-	mtspr	SPRN_IBAT0L,r10
-	mtspr	SPRN_IBAT1U,r10
-	mtspr	SPRN_IBAT1L,r10
-	mtspr	SPRN_IBAT2U,r10
-	mtspr	SPRN_IBAT2L,r10
-	mtspr	SPRN_IBAT3U,r10
-	mtspr	SPRN_IBAT3L,r10
-BEGIN_FTR_SECTION
-	/* Here's a tweak: at this point, CPU setup have
-	 * not been called yet, so HIGH_BAT_EN may not be
-	 * set in HID0 for the 745x processors. However, it
-	 * seems that doesn't affect our ability to actually
-	 * write to these SPRs.
-	 */
-	mtspr	SPRN_DBAT4U,r10
-	mtspr	SPRN_DBAT4L,r10
-	mtspr	SPRN_DBAT5U,r10
-	mtspr	SPRN_DBAT5L,r10
-	mtspr	SPRN_DBAT6U,r10
-	mtspr	SPRN_DBAT6L,r10
-	mtspr	SPRN_DBAT7U,r10
-	mtspr	SPRN_DBAT7L,r10
-	mtspr	SPRN_IBAT4U,r10
-	mtspr	SPRN_IBAT4L,r10
-	mtspr	SPRN_IBAT5U,r10
-	mtspr	SPRN_IBAT5L,r10
-	mtspr	SPRN_IBAT6U,r10
-	mtspr	SPRN_IBAT6L,r10
-	mtspr	SPRN_IBAT7U,r10
-	mtspr	SPRN_IBAT7L,r10
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
-	blr
-
-flush_tlbs:
-	lis	r10, 0x40
-1:	addic.	r10, r10, -0x1000
-	tlbie	r10
-	blt	1b
-	sync
-	blr
-
-mmu_off:
- 	addi	r4, r3, __after_mmu_off - _start
-	mfmsr	r3
-	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
-	beqlr
-	andc	r3,r3,r0
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	sync
-	RFI
-
-/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to KERNELBASE.  From this point on we can't safely
- * call OF any more.
- */
-initial_bats:
-	lis	r11,KERNELBASE@h
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	bne	4f
-	ori	r11,r11,4		/* set up BAT registers for 601 */
-	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
-	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
-	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
-	isync
-	blr
-
-4:	tophys(r8,r11)
-#ifdef CONFIG_SMP
-	ori	r8,r8,0x12		/* R/W access, M=1 */
-#else
-	ori	r8,r8,2			/* R/W access */
-#endif /* CONFIG_SMP */
-	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
-
-	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
-	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT0U,r11
-	isync
-	blr
-
-#ifdef CONFIG_BOOTX_TEXT
-setup_disp_bat:
-	/*
-	 * setup the display bat prepared for us in prom.c
-	 */
-	mflr	r8
-	bl	reloc_offset
-	mtlr	r8
-	addis	r8,r3,disp_BAT@ha
-	addi	r8,r8,disp_BAT@l
-	lwz	r11,0(r8)
-	lwz	r8,4(r8)
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	beq	1f
-	mtspr	SPRN_DBAT3L,r8
-	mtspr	SPRN_DBAT3U,r11
-	blr
-1:	mtspr	SPRN_IBAT3L,r8
-	mtspr	SPRN_IBAT3U,r11
-	blr
-
-#endif /* defined(CONFIG_BOOTX_TEXT) */
-
-#ifdef CONFIG_8260
-/* Jump into the system reset for the rom.
- * We first disable the MMU, and then jump to the ROM reset address.
- *
- * r3 is the board info structure, r4 is the location for starting.
- * I use this for building a small kernel that can load other kernels,
- * rather than trying to write or rely on a rom monitor that can tftp load.
- */
-       .globl  m8260_gorom
-m8260_gorom:
-	mfmsr	r0
-	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
-	sync
-	mtmsr	r0
-	sync
-	mfspr	r11, SPRN_HID0
-	lis	r10, 0
-	ori	r10,r10,HID0_ICE|HID0_DCE
-	andc	r11, r11, r10
-	mtspr	SPRN_HID0, r11
-	isync
-	li	r5, MSR_ME|MSR_RI
-	lis	r6,2f@h
-	addis	r6,r6,-KERNELBASE@h
-	ori	r6,r6,2f@l
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r5
-	isync
-	sync
-	rfi
-2:
-	mtlr	r4
-	blr
-#endif
-
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-	.globl intercept_table
-intercept_table:
-	.long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
-	.long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
-	.long 0, 0, 0, i0x1300, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
deleted file mode 100644
index ebb5a403829f..000000000000
--- a/arch/ppc/kernel/head_44x.S
+++ /dev/null
@@ -1,769 +0,0 @@
-/*
- * Kernel execution entry point code.
- *
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *    Copyright 2002-2005 MontaVista Software, Inc.
- *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/ibm44x.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include "head_booke.h"
-
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=128")
- *   r7 - End of kernel command line string
- *
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-	/*
-	 * Reserve a word at a fixed location to store the address
-	 * of abatron_pteptrs
-	 */
-	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0		/* CPU number */
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from.  We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- *	 determine which physical region we are located
- *	 in.  This can be used to determine where in RAM
- *	 (on a shared CPU system) or PCI memory space
- *	 (on a DRAMless system) we are located.
- *       For now, we assume a perfect world which means
- *	 we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
-	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
-	mfspr	r3,SPRN_PID			/* Get PID */
-	mfmsr	r4				/* Get MSR */
-	andi.	r4,r4,MSR_IS@l			/* TS=1? */
-	beq	wmmucr				/* If not, leave STS=0 */
-	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
-	sync
-
-	bl	invstr				/* Find our address */
-invstr:	mflr	r5				/* Make it accessible */
-	tlbsx	r23,0,r5			/* Find entry we are in */
-	li	r4,0				/* Start at TLB entry 0 */
-	li	r3,0				/* Set PAGEID inval value */
-1:	cmpw	r23,r4				/* Is this our entry? */
-	beq	skpinv				/* If so, skip the inval */
-	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
-skpinv:	addi	r4,r4,1				/* Increment */
-	cmpwi	r4,64				/* Are we done? */
-	bne	1b				/* If not, repeat */
-	isync					/* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
-	/* Load the kernel PID = 0 */
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Initialize MMUCR */
-	li	r5,0
-	mtspr	SPRN_MMUCR,r5
-	sync
-
- 	/* pageid fields */
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
-	/* xlat fields */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
-
-	/* attrib fields */
-	/* Added guarded bit to protect against speculative loads/stores */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	mfmsr	r0
-	mtspr	SPRN_SRR1, r0
-	lis	r0,3f@h
-	ori	r0,r0,3f@l
-	mtspr	SPRN_SRR0,r0
-	sync
-	rfi
-
-	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,63
-	beq	4f
-	li	r6,0
-	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	isync
-
-4:
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/*
-	 * Add temporary UART mapping for early debug.
-	 * We can map UART registers wherever we want as long as they don't
-	 * interfere with other system mappings (e.g. with pinned entries).
-	 * For an example of how we handle this - see ocotea.h.       --ebs
-	 */
- 	/* pageid fields */
-	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
-
-	/* xlat fields */
-	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifdef UART0_PHYS_ERPN
-	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
-#endif
-
-	/* attrib fields */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
-
-	li	r0,62			/* TLB slot 62 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	isync
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
-
-	/*
-	 * This is where the main kernel code starts.
-	 */
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to current thread */
-	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@h
-	ori	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-	/* Setup PTE pointers for the Abatron bdiGDB */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	lis	r4, KERNELBASE@h
-	ori	r4, r4, KERNELBASE@l
-	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
-	stw	r6, 0(r5)
-
-	/* Let's move on */
-	lis	r4,start_kernel@h
-	ori	r4,r4,start_kernel@l
-	lis	r3,MSR_KERNEL@h
-	ori	r3,r3,MSR_KERNEL@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi			/* change context and jump to start_kernel */
-
-/*
- * Interrupt vector entry code
- *
- * The Book E MMUs are always on so we don't need to handle
- * interrupts in real mode as with previous PPC processors. In
- * this case we handle interrupts in the kernel virtual address
- * space.
- *
- * Interrupt vectors are dynamically placed relative to the
- * interrupt prefix as determined by the address of interrupt_base.
- * The interrupt vectors offsets are programmed using the labels
- * for each interrupt vector entry.
- *
- * Interrupt vectors must be aligned on a 16 byte boundary.
- * We align on a 32 byte cache line boundary for good measure.
- */
-
-interrupt_base:
-	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
-
-	/* Machine Check Interrupt */
-#ifdef CONFIG_440A
-	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
-
-	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	rlwinm	r11,r11,0,20,15		/* Clear U0-U3 */
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
-	INSTRUCTION_STORAGE_EXCEPTION
-
-	/* External Input Interrupt */
-	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
-	/* Alignment Interrupt */
-	ALIGNMENT_EXCEPTION
-
-	/* Program Interrupt */
-	PROGRAM_EXCEPTION
-
-	/* Floating Point Unavailable Interrupt */
-#ifdef CONFIG_PPC_FPU
-	FP_UNAVAILABLE_EXCEPTION
-#else
-	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
-#endif
-
-	/* System Call Interrupt */
-	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
-
-	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
-
-	/* Decrementer Interrupt */
-	DECREMENTER_EXCEPTION
-
-	/* Fixed Internal Timer Interrupt */
-	/* TODO: Add FIT support */
-	EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
-
-	/* Watchdog Timer Interrupt */
-	/* TODO: Add watchdog support */
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
-#endif
-
-	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	 /* Jump to common tlb load */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction TLB Error Interrupt */
-	/*
-	 * Nearly the same as above, except we get our
-	 * information from different registers and bailout
-	 * to a different point.
-	 */
-	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	/* Jump to common TLB load point */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionStorage
-
-	/* Debug Interrupt */
-	DEBUG_EXCEPTION
-
-/*
- * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-
-/*
-
- * Both the instruction and data TLB miss get to this
- * point to load the TLB.
- * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
- *	MMUCR - loaded with proper value when we get here
- *	Upon exit, we reload everything and RFI.
- */
-finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
-
-	/*
-	 * Create PAGEID. This is the faulting address,
-	 * page size, and valid flag.
-	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi					/* Force context change */
-
-/*
- * Global functions
- */
-
-/*
- * extern void giveup_altivec(struct task_struct *prev)
- *
- * The 44x core does not have an AltiVec unit.
- */
-_GLOBAL(giveup_altivec)
-	blr
-
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * The 44x core does not have an FPU.
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r4, 0x4(r5)
-#endif
-	mtspr	SPRN_PID,r3
-	isync			/* Force context change */
-	blr
-
-/*
- * We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-/*
- * To support >32-bit physical addresses, we use an 8KB pgdir.
- */
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	8192
-
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/*
- * Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S
deleted file mode 100644
index 51da157a629e..000000000000
--- a/arch/ppc/kernel/head_4xx.S
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *
- *
- *    Module name: head_4xx.S
- *
- *    Description:
- *      Kernel execution entry point code.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=96m")
- *   r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs.......  -- Dan
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
-	lis	r0,MSR_KERNEL@h
-	ori	r0,r0,MSR_KERNEL@l
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
-	. = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
-	.space	4
-_GLOBAL(crit_r11)
-	.space	4
-
-/*
- * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
- */
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r1);							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions.  This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-#define CRITICAL_EXCEPTION_PROLOG					     \
-	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
-	stw	r11,crit_r11@l(0);					     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r11);						     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,SPRN_SRR2;						     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR3;						     \
-	stw	r1,0(r11);						     \
-	tovirt(r1,r11);							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-	/*
-	 * State at this point:
-	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
-	 * r10 saved in crit_r10 and in stack frame, trashed
-	 * r11 saved in crit_r11 and in stack frame,
-	 *	now phys stack/exception frame pointer
-	 * r12 saved in stack frame, now saved SRR2
-	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
-	 * LR, DEAR, ESR in stack frame
-	 * r1 saved in stack frame, now virt stack/excframe pointer
-	 * r0, r3-r8 saved in stack frame
-	 */
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(n, label)					     \
-	. = n;								     \
-label:
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(n, label);				\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(n, label);				\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler,	\
-			  ret_from_crit_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
-	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons.  U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit.  Otherwise, we call heavywight functions to do the work.
- */
-	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-
-	/* First, check if it was a zone fault (which means a user
-	* tried to access a kernel or read-protected page - always
-	* a SEGV).  All other faults here must be stores, so no
-	* need to check ESR_DST as well. */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_DIZ@h
-	bne	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r11, 0(r11)		/* Get L1 entry */
-	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-
-	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 0(r12)		/* Update Linux page table */
-
-	/* Most of the Linux PTE is ready to load into the TLB LO.
-	 * We set ZSEL, where only the LS-bit determines user access.
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
-
-	/* find the TLB index that caused the fault.  It has to be here.
-	*/
-	tlbsx	r9, 0, r10
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
-	START_EXCEPTION(0x0400, InstructionAccess)
-	NORMAL_EXCEPTION_PROLOG
-	mr	r4,r12			/* Pass SRR0 as arg2 */
-	li	r5,0			/* Pass zero as arg3 */
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* 0x0500 - External Interrupt Exception */
-	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* 0x0600 - Alignment Exception */
-	START_EXCEPTION(0x0600, Alignment)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
-	stw	r4,_DEAR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* 0x0700 - Program Exception */
-	START_EXCEPTION(0x0700, ProgramCheck)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
-	stw	r4,_ESR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x700, program_check_exception)
-
-	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
-
-/* 0x0C00 - System Call Exception */
-	START_EXCEPTION(0x0C00,	SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
-	START_EXCEPTION(0x1000, Decrementer)
-	NORMAL_EXCEPTION_PROLOG
-	lis	r0,TSR_PIS@h
-	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_LITE(0x1000, timer_interrupt)
-
-#if 0
-/* NOTE:
- * FIT and WDT handlers are not implemented yet.
- */
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception
-*/
-	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
-
-/* 0x1020 - Watchdog Timer (WDT) Exception
-*/
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
-#endif
-#endif
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it.  The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
-	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
-	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionAccess
-
-	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_IBM405_ERR51
-	/* 405GP errata 51 */
-	START_EXCEPTION(0x1700, Trap_17)
-	b DTLBMiss
-#else
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-#endif
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
-	/* 0x2000 - Debug Exception */
-	START_EXCEPTION(0x2000, DebugTrap)
-	CRITICAL_EXCEPTION_PROLOG
-
-	/*
-	 * If this is a single step or branch-taken exception in an
-	 * exception entry sequence, it was probably meant to apply to
-	 * the code where the exception occurred (since exception entry
-	 * doesn't turn off DE automatically).  We simulate the effect
-	 * of turning off DE on entry to an exception handler by turning
-	 * off DE in the SRR3 value and clearing the debug status.
-	 */
-	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
-	andis.	r10,r10,DBSR_IC@h
-	beq+	2f
-
-	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
-	beq	1f			/* branch and fix it up */
-
-	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
-	cmplwi  r10,0x2100
-	bgt+    2f			/* address above exception vectors */
-
-	/* here it looks like we got an inappropriate debug exception. */
-1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
-	lis	r10,DBSR_IC@h		/* clear the IC event */
-	mtspr	SPRN_DBSR,r10
-	/* restore state and get out */
-	lwz	r10,_CCR(r11)
-	lwz	r0,GPR0(r11)
-	lwz	r1,GPR1(r11)
-	mtcrf	0x80,r10
-	mtspr	SPRN_SRR2,r12
-	mtspr	SPRN_SRR3,r9
-	lwz	r9,GPR9(r11)
-	lwz	r12,GPR12(r11)
-	lwz	r10,crit_r10@l(0)
-	lwz	r11,crit_r11@l(0)
-	PPC405_ERR77_SYNC
-	rfci
-	b	.
-
-	/* continue normal handling for a critical exception... */
-2:	mfspr	r4,SPRN_DBSR
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
-		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
-	/* Damn, I came up one instruction too many to fit into the
-	 * exception space :-).  Both the instruction and data TLB
-	 * miss get to this point to load the TLB.
-	 * 	r10 - TLB_TAG value
-	 * 	r11 - Linux PTE
-	 *	r12, r9 - avilable to use
-	 *	PID - loaded with proper value when we get here
-	 *	Upon exit, we reload everything and RFI.
-	 * Actually, it will fit now, but oh well.....a common place
-	 * to load the TLB.
-	 */
-tlb_4xx_index:
-	.long	0
-finish_tlb_load:
-	/* load the next available TLB index.
-	*/
-	lwz	r9, tlb_4xx_index@l(0)
-	addi	r9, r9, 1
-	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
-	stw	r9, tlb_4xx_index@l(0)
-
-6:
-	/*
-	 * Clear out the software-only bits in the PTE to generate the
-	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
-	 * top 3 bits of the zone field, and M.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_GLOBAL(giveup_fpu)
-	blr
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
-	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-	b	.		/* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
-	sync			/* Flush to memory before changing TLB */
-	tlbia
-	isync			/* Flush shadow TLBs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	lis	r4,MSR_KERNEL@h
-	ori	r4,r4,MSR_KERNEL@l
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-	b	.		/* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 16 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-	isync
-
-	/* We should still be executing code at physical address 0x0000xxxx
-	 * at this point. However, start_here is at virtual address
-	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
-	 * translation is enabled.
-	 */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-	tophys(r4,r3)			/* Load the kernel physical address */
-
-	iccci	r0,r3			/* Invalidate the i-cache before use */
-
-	/* Load the kernel PID.
-	*/
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Configure and load two entries into TLB slots 62 and 63.
-	 * In case we are pinning TLBs, these are reserved in by the
-	 * other TLB functions.  If not reserving, then it doesn't
-	 * matter where they are loaded.
-	 */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
-
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
-	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
-
-	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
-	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
-
-	lis	r3,SERIAL_DEBUG_IO_BASE@h
-	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
-	mr	r4,r3
-	clrrwi	r4,r4,12
-	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
-
-	clrrwi	r3,r3,12
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
-
-	li	r0,0			/* TLB slot 0 */
-	tlbwe	r4,r0,TLB_DATA
-	tlbwe	r3,r0,TLB_TAG
-#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
-
-	isync
-
-	/* Establish the exception vector base
-	*/
-	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
-	tophys(r0,r4)			/* Use the physical address */
-	mtspr	SPRN_EVPR,r0
-
-	blr
-
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	sync
-	mtspr	SPRN_PID,r3
-	isync				/* Need an isync to flush shadow */
-					/* TLBs after changing PID */
-	blr
-
-/* We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
-/* This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
deleted file mode 100644
index 321bda2de2cb..000000000000
--- a/arch/ppc/kernel/head_8xx.S
+++ /dev/null
@@ -1,959 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications by Dan Malek
- *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains low-level support and setup for PowerPC 8xx
- *  embedded processors, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* Macro to make the code more readable. */
-#ifdef CONFIG_8xx_CPU6
-#define DO_8xx_CPU6(val, reg)	\
-	li	reg, val;	\
-	stw	reg, 12(r0);	\
-	lwz	reg, 12(r0);
-#else
-#define DO_8xx_CPU6(val, reg)
-#endif
-	.text
-	.globl	_stext
-_stext:
-	.text
-	.globl	_start
-_start:
-
-/* MPC8xx
- * This port was done on an MBX board with an 860.  Right now I only
- * support an ELF compressed (zImage) boot from EPPC-Bug because the
- * code there loads up some registers before calling us:
- *   r3: ptr to board info data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * I decided to use conditional compilation instead of checking PVR and
- * adding more processor specific branches around code I don't need.
- * Since this is an embedded processor, I also appreciate any memory
- * savings I can get.
- *
- * The MPC8xx does not have any BATs, but it supports large page sizes.
- * We first initialize the MMU to support 8M byte pages, then load one
- * entry into each of the instruction and data TLBs to map the first
- * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
- * the "internal" processor registers before MMU_init is called.
- *
- * The TLB code currently contains a major hack.  Since I use the condition
- * code register, I have to save and restore it.  I am out of registers, so
- * I just store it in memory location 0 (the TLB handlers are not reentrant).
- * To avoid making any decisions, I need to use the "segment" valid bit
- * in the first level table, but that would require many changes to the
- * Linux page directory/table functions that I don't want to do right now.
- *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
- *	-- Dan
- */
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 8 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-MachineCheck:
-	EXCEPTION_PROLOG
-	mfspr r4,SPRN_DAR
-	stw r4,_DAR(r11)
-	mfspr r5,SPRN_DSISR
-	stw r5,_DSISR(r11)
-	addi r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* No FPU on MPC8xx.  This exception is not supposed to happen.
-*/
-	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, this is a software emulation interrupt.  It occurs
- * for all unimplemented and illegal instructions.
- */
-	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
-
-	. = 0x1100
-/*
- * For the MPC8xx, this is a software tablewalk to load the instruction
- * TLB.  It is modelled after the example in the Motorola manual.  The task
- * switch loads the M_TWB register with the pointer to the first level table.
- * If we discover there is no second level table (value is zero) or if there
- * is an invalid pte, we load that into the TLB, which causes another fault
- * into the TLB Error interrupt where we can handle such problems.
- * We have to use the MD_xxx registers for the tablewalk because the
- * equivalent MI_xxx registers only perform the attribute functions.
- */
-InstructionTLBMiss:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load the MI_TWC with the attributes
-	 * for this "segment."
-	 */
-	ori	r11,r11,1		/* Set valid bit */
-	DO_8xx_CPU6(0x2b80, r3)
-	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r11)	/* Get the pte */
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-4:
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-	stw	r10, 0(r11)
-#endif
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x2d80, r3)
-	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-
-	. = 0x1200
-DataStoreTLBMiss:
-	stw	r3, 8(r0)
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-	stw	r12, 16(r0)
-	b LoadLargeDTLB
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-	/* and update pte in table */
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-#endif
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is an instruction TLB error on the MPC8xx.  This could be due
- * to many reasons, such as executing guarded memory or illegal instruction
- * addresses.  There is nothing to do but handle a big time error fault.
- */
-	. = 0x1300
-InstructionTLBError:
-	b	InstructionAccess
-
-LoadLargeDTLB:
-	li	r12, 0
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	3f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-
-	rlwimi  r12, r10, 0, 0, 9	/* extract phys. addr */
-	mfspr	r3, SPRN_MD_EPN
-	rlwinm	r3, r3, 0, 0, 9		/* extract virtual address */
-	tophys(r3, r3)
-	cmpw	r3, r12			/* only use 8M page if it is a direct 
-					   kernel mapping */
-	bne	1f
-	ori     r11, r11, MD_PS8MEG
-	li	r12, 1
-	b	2f
-1:
-	li	r12, 0		/* can't use 8MB TLB, so zero r12. */
-2:
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-3:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	cmpwi   r12, 1
-	bne 4f
-	ori     r10, r10, 0x8
-
-	mfspr	r12, SPRN_MD_EPN
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r12, r3, r12
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r12
-
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r10, r3, r10
-4:
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-
-	lwz	r12, 16(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is the data TLB error on the MPC8xx.  This could be due to
- * many reasons, including a dirty update to a pte.  We can catch that
- * one here, but anything else is an error.  First, we track down the
- * Linux pte.  If it is valid, write access is allowed, but the
- * page dirty bit is not set, we will set it and reload the TLB.  For
- * any other case, we bail out to a higher level function that can
- * handle it.
- */
-	. = 0x1400
-DataTLBError:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-
-	/* First, make sure this was a store operation.
-	*/
-	mfspr	r10, SPRN_DSISR
-	andis.	r11, r10, 0x0200	/* If set, indicates store op */
-	beq	2f
-
-	/* The EA of a data TLB miss is automatically stored in the MD_EPN
-	 * register.  The EA of a data TLB error is automatically stored in
-	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
-	 * significant bits of the EA from the DAR to MD_EPN before we
-	 * start walking the page tables.  We also need to copy the CASID
-	 * value from the M_CASID register.
-	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
-	 * in DAR, but it seems that this doesn't happen in some cases, such
-	 * as when the error is due to a dcbi instruction to a page with a
-	 * TLB that doesn't have the changed bit set.  In such cases, there
-	 * does not appear to be any way  to recover the EA of the error
-	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
-	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
-	 * are initialized in mapin_ram().  This will avoid the problem,
-	 * assuming we only use the dcbi instruction on kernel addresses.
-	 */
-	mfspr	r10, SPRN_DAR
-	rlwinm	r11, r10, 0, 0, 19
-	ori	r11, r11, MD_EVALID
-	mfspr	r10, SPRN_M_CASID
-	rlwimi	r11, r10, 0, 28, 31
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r11
-
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, bail */
-
-	/* We have a pte table, so fetch the pte from the table.
-	 */
-	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
-	lwz	r10, 0(r11)		/* Get the pte */
-
-	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail out if not */
-
-	/* Update 'changed', among others.
-	*/
-#ifdef CONFIG_SWAP
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-#else
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
-	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
-	stw	r10, 0(r11)		/* and update pte in table */
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-2:
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	b	DataAccess
-
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, these next four traps are used for development
- * support of breakpoints and such.  Someday I will get around to
- * using them.
- */
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-
-	. = 0x2000
-
-	.globl	giveup_fpu
-giveup_fpu:
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 8xx, all we have to do is invalidate the TLB to clear
- * the old 8M byte TLB mappings and load the page table base register.
- */
-	/* The right way to do this would be to track it down through
-	 * init's THREAD like the context switch code does, but this is
-	 * easier......until someone changes init's static structures.
-	 */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r6,r6)
-#ifdef CONFIG_8xx_CPU6
-	lis	r4, cpu6_errata_word@h
-	ori	r4, r4, cpu6_errata_word@l
-	li	r3, 0x3980
-	stw	r3, 12(r4)
-	lwz	r3, 12(r4)
-#endif
-	mtspr	SPRN_M_TWB, r6
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-/* Load up the kernel context */
-2:
-	SYNC			/* Force all PTE updates to finish */
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	tovirt(r6,r6)
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 8 MBytes of memory 1:1
- * virtual to physical.  Also, set the cache mode since that is defined
- * by TLB entries and perform any additional mapping (like of the IMMR).
- * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
- * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
- * these mappings is mapped by page tables.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
-	lis	r8, MI_RSV4I@h
-	ori	r8, r8, 0x1c00
-#else
-	li	r8, 0
-#endif
-	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
-
-#ifdef CONFIG_PIN_TLB
-	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
-	ori	r10, r10, 0x1c00
-	mr	r8, r10
-#else
-	lis	r10, MD_RESETVAL@h
-#endif
-#ifndef CONFIG_8xx_COPYBACK
-	oris	r10, r10, MD_WTDEF@h
-#endif
-	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
-
-	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
-	 * we can load the instruction and data TLB registers with the
-	 * same values.
-	 */
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MI_EPN, r8
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MI_TWC, r8
-	mtspr	SPRN_MD_TWC, r8
-	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
-	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
-	mtspr	SPRN_MD_RPN, r8
-	lis	r8, MI_Kp@h		/* Set the protection mode */
-	mtspr	SPRN_MI_AP, r8
-	mtspr	SPRN_MD_AP, r8
-
-	/* Map another 8 MByte at the IMMR to get the processor
-	 * internal registers (among other things).
-	 */
-#ifdef CONFIG_PIN_TLB
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-#endif
-	mfspr	r9, 638			/* Get current IMMR */
-	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
-
-	mr	r8, r9			/* Create vaddr for TLB */
-	ori	r8, r8, MD_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MD_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MD_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r8
-	mr	r8, r9			/* Create paddr for TLB */
-	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
-	mtspr	SPRN_MD_RPN, r8
-
-#ifdef CONFIG_PIN_TLB
-	/* Map two more 8M kernel data pages.
-	*/
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	addis	r8, r8, 0x0080		/* Add 8M */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r9, MI_PS8MEG		/* Set 8M byte page */
-	ori	r9, r9, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r9
-	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	addis	r8, r8, 0x0080		/* Add 8M */
-	mtspr	SPRN_MD_EPN, r8
-	mtspr	SPRN_MD_TWC, r9
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-#endif
-
-	/* Since the cache is enabled according to the information we
-	 * just loaded into the TLB, invalidate and enable the caches here.
-	 * We should probably check/set other modes....later.
-	 */
-	lis	r8, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r8
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r8
-#ifdef CONFIG_8xx_COPYBACK
-	mtspr	SPRN_DC_CST, r8
-#else
-	/* For a debug option, I left this here to easily enable
-	 * the write through cache mode
-	 */
-	lis	r8, DC_SFWT@h
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_DC_CST, r8
-#endif
-	blr
-
-
-/*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-
-#ifdef CONFIG_8xx_CPU6
-	lis	r6, cpu6_errata_word@h
-	ori	r6, r6, cpu6_errata_word@l
-	tophys	(r4, r4)
-	li	r7, 0x3980
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
-	li	r7, 0x3380
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_CASID, r3             /* Update context */
-#else
-        mtspr   SPRN_M_CASID,r3		/* Update context */
-	tophys	(r4, r4)
-	mtspr	SPRN_M_TWB, r4		/* and pgd */
-#endif
-	SYNC
-	blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled.  I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
-	.globl	set_dec_cpu6
-set_dec_cpu6:
-	lis	r7, cpu6_errata_word@h
-	ori	r7, r7, cpu6_errata_word@l
-	li	r4, 0x2c00
-	stw	r4, 8(r7)
-	lwz	r4, 8(r7)
-        mtspr   22, r3		/* Update Decrementer */
-	SYNC
-	blr
-#endif
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE table poiners, usually the kernel and current user
- * pointer to their respective root page table (pgdir).
- */
-abatron_pteptrs:
-	.space	8
-
-#ifdef CONFIG_8xx_CPU6
-	.globl	cpu6_errata_word
-cpu6_errata_word:
-	.space	16
-#endif
-
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
deleted file mode 100644
index 166d597b6db2..000000000000
--- a/arch/ppc/kernel/head_booke.h
+++ /dev/null
@@ -1,308 +0,0 @@
-#ifndef __HEAD_BOOKE_H__
-#define __HEAD_BOOKE_H__
-
-/*
- * Macros used for common Book-e exception handling
- */
-
-#define SET_IVOR(vector_number, vector_label)		\
-		li	r26,vector_label@l; 		\
-		mtspr	SPRN_IVOR##vector_number,r26;	\
-		sync
-
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG4W,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	mr	r11,r1;							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG4R;					     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
- *
- * On 40x critical is the only additional level
- * On 44x/e500 we have critical and machine check
- * On e200 we have critical and debug (machine check occurs via critical)
- *
- * Additionally we reserve a SPRG for each priority level so we can free up a
- * GPR to use as the base for indirect access to the exception stacks.  This
- * is necessary since the MMU is always on, for Book-E parts, and the stacks
- * are offset from KERNELBASE.
- *
- */
-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
-
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG	SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG	SPRN_SPRG6W
-
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
-
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
-#define DEBUG_SPRG		SPRN_SPRG6W
-
-#ifdef CONFIG_SMP
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
-#else
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
-#endif
-
-/*
- * Exception prolog for critical/machine check exceptions.  This is a
- * little different from the normal exception prolog above since a
- * critical/machine check exception can potentially occur at any point
- * during normal exception processing. Thus we cannot use the same SPRG
- * registers as the normal prolog above. Instead we use a portion of the
- * critical/machine check exception stack at low physical addresses.
- */
-#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
-	mtspr	exc_level##_SPRG,r8;					     \
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,exc_level_srr0;					     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,exc_level_srr1;					     \
-	stw	r1,0(r11);						     \
-	mr	r1,r11;							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-#define CRITICAL_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
-#define DEBUG_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
-#define MCHECK_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(label)						     \
-        .align 5;              						     \
-label:
-
-#define FINISH_EXCEPTION(func)					\
-	bl	transfer_to_handler_full;			\
-	.long	func;						\
-	.long	ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(label);					\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler, \
-			  ret_from_crit_exc)
-
-#define MCHECK_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	MCHECK_EXCEPTION_PROLOG;				\
-	mfspr	r5,SPRN_ESR;					\
-	stw	r5,_ESR(r11);					\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, mcheck_transfer_to_handler,   \
-			  ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_CSRR1, which will still have
- * the MSR_DE bit set.
- */
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
-	CRITICAL_EXCEPTION_PROLOG;					      \
-									      \
-	/*								      \
-	 * If there is a single step or branch-taken exception in an	      \
-	 * exception entry sequence, it was probably meant to apply to	      \
-	 * the code where the exception occurred (since exception entry	      \
-	 * doesn't turn off DE automatically).  We simulate the effect	      \
-	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
-	 */								      \
-	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
-	beq+	2f;							      \
-									      \
-	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
-	ori	r10,r10,KERNELBASE@l;					      \
-	cmplw	r12,r10;						      \
-	blt+	2f;			/* addr below exception vectors */    \
-									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
-	cmplw	r12,r10;						      \
-	bgt+	2f;			/* addr above exception vectors */    \
-									      \
-	/* here it looks like we got an inappropriate debug exception. */     \
-1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
-	mtspr	SPRN_DBSR,r10;						      \
-	/* restore state and get out */					      \
-	lwz	r10,_CCR(r11);						      \
-	lwz	r0,GPR0(r11);						      \
-	lwz	r1,GPR1(r11);						      \
-	mtcrf	0x80,r10;						      \
-	mtspr	SPRN_CSRR0,r12;						      \
-	mtspr	SPRN_CSRR1,r9;						      \
-	lwz	r9,GPR9(r11);						      \
-	lwz	r12,GPR12(r11);						      \
-	mtspr	CRIT_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
-	mfspr	r8,CRIT_SPRG;						      \
-									      \
-	rfci;								      \
-	b	.;							      \
-									      \
-	/* continue normal handling for a critical exception... */	      \
-2:	mfspr	r4,SPRN_DBSR;						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-#define INSTRUCTION_STORAGE_EXCEPTION					      \
-	START_EXCEPTION(InstructionStorage)				      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r5,_ESR(r11);						      \
-	mr      r4,r12;                 /* Pass SRR0 as arg2 */		      \
-	li      r5,0;                   /* Pass zero as arg3 */		      \
-	EXC_XFER_EE_LITE(0x0400, handle_page_fault)
-
-#define ALIGNMENT_EXCEPTION						      \
-	START_EXCEPTION(Alignment)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
-	stw     r4,_DEAR(r11);						      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE(0x0600, alignment_exception)
-
-#define PROGRAM_EXCEPTION						      \
-	START_EXCEPTION(Program)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r4,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r4,_ESR(r11);						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_STD(0x0700, program_check_exception)
-
-#define DECREMENTER_EXCEPTION						      \
-	START_EXCEPTION(Decrementer)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
-	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_LITE(0x0900, timer_interrupt)
-
-#define FP_UNAVAILABLE_EXCEPTION					      \
-	START_EXCEPTION(FloatingPointUnavailable)			      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-#endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c
deleted file mode 100644
index a469ba438cbe..000000000000
--- a/arch/ppc/kernel/machine_kexec.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/cacheflush.h>
-#include <asm/machdep.h>
-
-typedef NORET_TYPE void (*relocate_new_kernel_t)(
-				unsigned long indirection_page,
-				unsigned long reboot_code_buffer,
-				unsigned long start_address) ATTRIB_NORET;
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-
-void machine_shutdown(void)
-{
-	if (ppc_md.machine_shutdown)
-		ppc_md.machine_shutdown();
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-	if (ppc_md.machine_crash_shutdown)
-		ppc_md.machine_crash_shutdown();
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_prepare)
-		return ppc_md.machine_kexec_prepare(image);
-	/*
-	 * Fail if platform doesn't provide its own machine_kexec_prepare
-	 * implementation.
-	 */
-	return -ENOSYS;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_cleanup)
-		ppc_md.machine_kexec_cleanup(image);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-NORET_TYPE void machine_kexec(struct kimage *image)
-{
-	if (ppc_md.machine_kexec)
-		ppc_md.machine_kexec(image);
-	else {
-		/*
-		 * Fall back to normal restart if platform doesn't provide
-		 * its own kexec function, and user insist to kexec...
-		 */
-		machine_restart(NULL);
-	}
-	for(;;);
-}
-
-/*
- * This is a generic machine_kexec function suitable at least for
- * non-OpenFirmware embedded platforms.
- * It merely copies the image relocation code to the control page and
- * jumps to it.
- * A platform specific function may just call this one.
- */
-void machine_kexec_simple(struct kimage *image)
-{
-	unsigned long page_list;
-	unsigned long reboot_code_buffer, reboot_code_buffer_phys;
-	relocate_new_kernel_t rnk;
-
-	/* Interrupts aren't acceptable while we reboot */
-	local_irq_disable();
-
-	page_list = image->head;
-
-	/* we need both effective and real address here */
-	reboot_code_buffer =
-			(unsigned long)page_address(image->control_code_page);
-	reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer);
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
-						relocate_new_kernel_size);
-
-	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
-	printk(KERN_INFO "Bye!\n");
-
-	/* now call it */
-	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer_phys, image->start);
-}
-
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
deleted file mode 100644
index d5e0dfc9ffec..000000000000
--- a/arch/ppc/kernel/misc.S
+++ /dev/null
@@ -1,868 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/cputable.h>
-#include <asm/mmu.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_8xx
-#define ISYNC_8xx isync
-#else
-#define ISYNC_8xx
-#endif
-	.text
-
-	.align	5
-_GLOBAL(__delay)
-	cmpwi	0,r3,0
-	mtctr	r3
-	beqlr
-1:	bdnz	1b
-	blr
-
-/*
- * Returns (address we're running at) - (address we were linked at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-_GLOBAL(reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r3
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r3,r4,r3
-	mtlr	r0
-	blr
-
-/*
- * add_reloc_offset(x) returns x + reloc_offset().
- */
-_GLOBAL(add_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	add	r3,r3,r5
-	mtlr	r0
-	blr
-
-/*
- * sub_reloc_offset(x) returns x - reloc_offset().
- */
-_GLOBAL(sub_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	subf	r3,r5,r3
-	mtlr	r0
-	blr
-
-/*
- * reloc_got2 runs through the .got2 section adding an offset
- * to each entry.
- */
-_GLOBAL(reloc_got2)
-	mflr	r11
-	lis	r7,__got2_start@ha
-	addi	r7,r7,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf	r8,r7,r8
-	srwi.	r8,r8,2
-	beqlr
-	mtctr	r8
-	bl	1f
-1:	mflr	r0
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r0,r4,r0
-	add	r7,r0,r7
-2:	lwz	r0,0(r7)
-	add	r0,r0,r3
-	stw	r0,0(r7)
-	addi	r7,r7,4
-	bdnz	2b
-	mtlr	r11
-	blr
-
-/*
- * call_setup_cpu - call the setup_cpu function for this cpu
- * r3 = data offset, r24 = cpu number
- *
- * Setup function is called with:
- *   r3 = data offset
- *   r4 = ptr to CPU spec (relocated)
- */
-_GLOBAL(call_setup_cpu)
-	addis	r4,r3,cur_cpu_spec@ha
-	addi	r4,r4,cur_cpu_spec@l
-	lwz	r4,0(r4)
-	add	r4,r4,r3
-	lwz	r5,CPU_SPEC_SETUP(r4)
-	cmpi	0,r5,0
-	add	r5,r5,r3
-	beqlr
-	mtctr	r5
-	bctr
-
-/*
- * complement mask on the msr then "or" some values on.
- *     _nmask_and_or_msr(nmask, value_to_or)
- */
-_GLOBAL(_nmask_and_or_msr)
-	mfmsr	r0		/* Get current msr */
-	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
-	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
-	SYNC			/* Some chip revs have problems here... */
-	mtmsr	r0		/* Update machine state */
-	isync
-	blr			/* Done */
-
-
-/*
- * Flush MMU TLB
- */
-_GLOBAL(_tlbia)
-#if defined(CONFIG_40x)
-	sync			/* Flush to memory before changing mapping */
-	tlbia
-	isync			/* Flush shadow TLB */
-#elif defined(CONFIG_44x)
-	li	r3,0
-	sync
-
-	/* Load high watermark */
-	lis	r4,tlb_44x_hwater@ha
-	lwz	r5,tlb_44x_hwater@l(r4)
-
-1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
-	addi	r3,r3,1
-	cmpw	0,r3,r5
-	ble	1b
-
-	isync
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,10
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	sync
-	tlbia
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	sync
-	tlbia
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! defined(CONFIG_40x) */
-	blr
-
-/*
- * Flush MMU TLB for a particular address
- */
-_GLOBAL(_tlbie)
-#if defined(CONFIG_40x)
-	/* We run the search with interrupts disabled because we have to change
-	 * the PID and I don't want to preempt when that happens.
-	 */
-	mfmsr	r5
-	mfspr	r6,SPRN_PID
-	wrteei	0
-	mtspr	SPRN_PID,r4
-	tlbsx.	r3, 0, r3
-	mtspr	SPRN_PID,r6
-	wrtee	r5
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
-	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
-	 * the TLB entry. */
-	tlbwe	r3, r3, TLB_TAG
-	isync
-10:
-#elif defined(CONFIG_44x)
-	mfspr	r5,SPRN_MMUCR
-	rlwimi	r5,r4,0,24,31			/* Set TID */
-
-	/* We have to run the search with interrupts disabled, even critical
-	 * and debug interrupts (in fact the only critical exceptions we have
-	 * are debug and machine check).  Otherwise  an interrupt which causes
-	 * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
-	mfmsr	r4
-	lis	r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
-	addi	r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
-	andc	r6,r4,r6
-	mtmsr	r6
-	mtspr	SPRN_MMUCR,r5
-	tlbsx.	r3, 0, r3
-	mtmsr	r4
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64,
-	 * which means bit 22, is clear.  Since 22 is
-	 * the V bit in the TLB_PAGEID, loading this
-	 * value will invalidate the TLB entry.
-	 */
-	tlbwe	r3, r3, PPC44x_TLB_PAGEID
-	isync
-10:
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,11
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	eieio
-	tlbie	r3
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	tlbie	r3
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! CONFIG_40x */
-	blr
-
-/*
- * Flush instruction cache.
- * This is a no-op on the 601.
- */
-_GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
-	isync
-	lis	r5, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
-#ifdef CONFIG_403GCX
-	li      r3, 512
-	mtctr   r3
-	lis     r4, KERNELBASE@h
-1:	iccci   0, r4
-	addi    r4, r4, 16
-	bdnz    1b
-#else
-	lis	r3, KERNELBASE@h
-	iccci	0,r3
-#endif
-#else
-	mfspr	r3,SPRN_PVR
-	rlwinm	r3,r3,16,16,31
-	cmpwi	0,r3,1
-	beqlr			/* for 601, do nothing */
-	/* 603/604 processor - use invalidate-all bit in HID0 */
-	mfspr	r3,SPRN_HID0
-	ori	r3,r3,HID0_ICFI
-	mtspr	SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
-	isync
-	blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * __flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(__flush_icache_range)
-BEGIN_FTR_SECTION
-	blr				/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-	mr	r6,r3
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	mtctr	r4
-2:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	2b
-	sync				/* additional sync needed on g4 */
-	isync
-	blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Like above, but invalidate the D-cache.  This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbi's to get to ram */
-	blr
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS	64
-#define CACHE_NLINES	16
-
-_GLOBAL(flush_dcache_all)
-	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
-	mtctr	r4
-	lis     r5, KERNELBASE@h
-1:	lwz	r3, 0(r5)		/* Load one word from every line */
-	addi	r5, r5, L1_CACHE_BYTES
-	bdnz    1b
-	blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- *	void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-#ifndef CONFIG_44x
-	/* We don't flush the icache on 44x. Those have a virtual icache
-	 * and we don't have access to the virtual address here (it's
-	 * not the page vaddr but where it's mapped in user space). The
-	 * flushing of the icache on these is handled elsewhere, when
-	 * a change in the address space occurs, before returning to
-	 * user space
-	 */
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	isync
-#endif /* CONFIG_44x */
-	blr
-
-/*
- * Flush a particular page from the data cache to RAM, identified
- * by its physical address.  We turn off the MMU so we can just use
- * the physical address (this may be a highmem page without a kernel
- * mapping).
- *
- *	void __flush_dcache_icache_phys(unsigned long physaddr)
- */
-_GLOBAL(__flush_dcache_icache_phys)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	mfmsr	r10
-	rlwinm	r0,r10,0,28,26			/* clear DR */
-	mtmsr	r0
-	isync
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	mtmsr	r10				/* restore DR */
-	isync
-	blr
-
-/*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced).  This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
-	li	r0,4096/L1_CACHE_BYTES
-	slw	r0,r0,r4
-	mtctr	r0
-#ifdef CONFIG_8xx
-	li	r4, 0
-1:	stw	r4, 0(r3)
-	stw	r4, 4(r3)
-	stw	r4, 8(r3)
-	stw	r4, 12(r3)
-#else
-1:	dcbz	0,r3
-#endif
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	blr
-
-/*
- * Copy a whole page.  We use the dcbz instruction on the destination
- * to reduce memory traffic (it eliminates the unnecessary reads of
- * the destination into cache).  This requires that the destination
- * is cacheable.
- */
-#define COPY_16_BYTES		\
-	lwz	r6,4(r4);	\
-	lwz	r7,8(r4);	\
-	lwz	r8,12(r4);	\
-	lwzu	r9,16(r4);	\
-	stw	r6,4(r3);	\
-	stw	r7,8(r3);	\
-	stw	r8,12(r3);	\
-	stwu	r9,16(r3)
-
-_GLOBAL(copy_page)
-	addi	r3,r3,-4
-	addi	r4,r4,-4
-
-#ifdef CONFIG_8xx
-	/* don't use prefetch on 8xx */
-    	li	r0,4096/L1_CACHE_BYTES
-	mtctr	r0
-1:	COPY_16_BYTES
-	bdnz	1b
-	blr
-
-#else	/* not 8xx, we can prefetch */
-	li	r5,4
-
-#if MAX_COPY_PREFETCH > 1
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	mtctr	r0
-11:	dcbt	r11,r4
-	addi	r11,r11,L1_CACHE_BYTES
-	bdnz	11b
-#else /* MAX_COPY_PREFETCH == 1 */
-	dcbt	r5,r4
-	li	r11,L1_CACHE_BYTES+4
-#endif /* MAX_COPY_PREFETCH */
-	li	r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
-	crclr	4*cr0+eq
-2:
-	mtctr	r0
-1:
-	dcbt	r11,r4
-	dcbz	r5,r3
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	1b
-	beqlr
-	crnot	4*cr0+eq,4*cr0+eq
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	b	2b
-#endif	/* CONFIG_8xx */
-
-/*
- * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
- * void atomic_set_mask(atomic_t mask, atomic_t *addr);
- */
-_GLOBAL(atomic_clear_mask)
-10:	lwarx	r5,0,r4
-	andc	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-_GLOBAL(atomic_set_mask)
-10:	lwarx	r5,0,r4
-	or	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-
-/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbz	r5,0(r3)
-01:	eieio
-02:	stbu	r5,1(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbzu	r5,1(r4)
-01:	stb	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhz	r5,0(r3)
-01:	eieio
-02:	sthu	r5,2(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhzu	r5,2(r4)
-01:	sth	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwz	r5,0(r3)
-01:	eieio
-02:	stwu	r5,4(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwzu	r5,4(r4)
-01:	stw	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-/*
- * Extended precision shifts.
- *
- * Updated to be valid for shift counts from 0 to 63 inclusive.
- * -- Gabriel
- *
- * R3/R4 has 64 bit value
- * R5    has shift count
- * result in R3/R4
- *
- *  ashrdi3: arithmetic right shift (sign propagation)	
- *  lshrdi3: logical right shift
- *  ashldi3: left shift
- */
-_GLOBAL(__ashrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
-	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
-	sraw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(__ashldi3)
-	subfic	r6,r5,32
-	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
-	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
-	or	r3,r3,r6	# MSW |= t1
-	slw	r4,r4,r5	# LSW = LSW << count
-	or	r3,r3,r7	# MSW |= t2
-	blr
-
-_GLOBAL(__lshrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	srw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(abs)
-	srawi	r4,r3,31
-	xor	r3,r3,r4
-	sub	r3,r3,r4
-	blr
-
-_GLOBAL(_get_SP)
-	mr	r3,r1		/* Close enough */
-	blr
-
-/*
- * Create a kernel thread
- *   kernel_thread(fn, arg, flags)
- */
-_GLOBAL(kernel_thread)
-	stwu	r1,-16(r1)
-	stw	r30,8(r1)
-	stw	r31,12(r1)
-	mr	r30,r3		/* function */
-	mr	r31,r4		/* argument */
-	ori	r3,r5,CLONE_VM	/* flags */
-	oris	r3,r3,CLONE_UNTRACED>>16
-	li	r4,0		/* new sp (unused) */
-	li	r0,__NR_clone
-	sc
-	cmpwi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
-	li	r0,0		/* make top-level stack frame */
-	stwu	r0,-16(r1)
-	mtlr	r30		/* fn addr in lr */
-	mr	r3,r31		/* load arg and call fn */
-	PPC440EP_ERR42
-	blrl
-	li	r0,__NR_exit	/* exit if function returns */
-	li	r3,0
-	sc
-1:	lwz	r30,8(r1)
-	lwz	r31,12(r1)
-	addi	r1,r1,16
-	blr
-
-_GLOBAL(kernel_execve)
-	li	r0,__NR_execve
-	sc
-	bnslr
-	neg	r3,r3
-	blr
-
-/*
- * This routine is just here to keep GCC happy - sigh...
- */
-_GLOBAL(__main)
-	blr
-
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
deleted file mode 100644
index df3ef6db072c..000000000000
--- a/arch/ppc/kernel/pci.c
+++ /dev/null
@@ -1,1233 +0,0 @@
-/*
- * Common prep/chrp pci routines. -- Cort
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/bootmem.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-unsigned long isa_io_base     = 0;
-unsigned long isa_mem_base    = 0;
-unsigned long pci_dram_offset = 0;
-int pcibios_assign_bus_offset = 1;
-
-void pcibios_make_OF_bus_map(void);
-
-static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
-static int probe_resource(struct pci_bus *parent, struct resource *pr,
-			  struct resource *res, struct resource **conflict);
-static void update_bridge_base(struct pci_bus *bus, int i);
-static void pcibios_fixup_resources(struct pci_dev* dev);
-static void fixup_broken_pcnet32(struct pci_dev* dev);
-static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_cpc710_pci64(struct pci_dev* dev);
-
-/* By default, we don't re-assign bus numbers.
- */
-int pci_assign_all_buses;
-
-struct pci_controller* hose_head;
-struct pci_controller** hose_tail = &hose_head;
-
-static int pci_bus_count;
-
-static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
-
-static void
-fixup_cpc710_pci64(struct pci_dev* dev)
-{
-	/* Hide the PCI64 BARs from the kernel as their content doesn't
-	 * fit well in the resource management
-	 */
-	dev->resource[0].start = dev->resource[0].end = 0;
-	dev->resource[0].flags = 0;
-	dev->resource[1].start = dev->resource[1].end = 0;
-	dev->resource[1].flags = 0;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
-
-static void
-pcibios_fixup_resources(struct pci_dev *dev)
-{
-	struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
-	int i;
-	unsigned long offset;
-
-	if (!hose) {
-		printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
-		return;
-	}
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = dev->resource + i;
-		if (!res->flags)
-			continue;
-		if (res->end == 0xffffffff) {
-			DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
-				pci_name(dev), i,
-				(unsigned long long)res->start,
-				(unsigned long long)res->end);
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-			continue;
-		}
-		offset = 0;
-		if (res->flags & IORESOURCE_MEM) {
-			offset = hose->pci_mem_offset;
-		} else if (res->flags & IORESOURCE_IO) {
-			offset = (unsigned long) hose->io_base_virt
-				- isa_io_base;
-		}
-		if (offset != 0) {
-			res->start += offset;
-			res->end += offset;
-#ifdef DEBUG
-			printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
-			       i, res->flags, pci_name(dev),
-			       res->start - offset, res->start);
-#endif
-		}
-	}
-
-	/* Call machine specific resource fixup */
-	if (ppc_md.pcibios_fixup_resources)
-		ppc_md.pcibios_fixup_resources(dev);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,		PCI_ANY_ID,			pcibios_fixup_resources);
-
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			     struct pci_bus_region *region)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	res->start = region->start + offset;
-	res->end = region->end + offset;
-}
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	struct pci_dev *dev = data;
-
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
-		if (size > 0x100) {
-			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-			       " (%lld bytes)\n", pci_name(dev),
-			       dev->resource - res, (unsigned long long)size);
-		}
-
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
-}
-EXPORT_SYMBOL(pcibios_align_resource);
-
-/*
- *  Handle resources of PCI devices.  If the world were perfect, we could
- *  just allocate all the resource regions and do nothing more.  It isn't.
- *  On the other hand, we cannot just re-allocate all devices, as it would
- *  require us to know lots of host bridge internals.  So we attempt to
- *  keep as much of the original configuration as possible, but tweak it
- *  when it's found to be wrong.
- *
- *  Known BIOS problems we have to work around:
- *	- I/O or memory regions not configured
- *	- regions configured, but not enabled in the command register
- *	- bogus I/O addresses above 64K used
- *	- expansion ROMs left enabled (this may sound harmless, but given
- *	  the fact the PCI specs explicitly allow address decoders to be
- *	  shared between expansion ROMs and other resource regions, it's
- *	  at least dangerous)
- *
- *  Our solution:
- *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
- *	    This gives us fixed barriers on where we can allocate.
- *	(2) Allocate resources for all enabled devices.  If there is
- *	    a collision, just mark the resource as unallocated. Also
- *	    disable expansion ROMs during this step.
- *	(3) Try to allocate resources for disabled devices.  If the
- *	    resources were assigned correctly, everything goes well,
- *	    if they weren't, they won't disturb allocation of other
- *	    resources.
- *	(4) Assign new addresses to resources which were either
- *	    not configured at all or misconfigured.  If explicitly
- *	    requested by the user, configure expansion ROM address
- *	    as well.
- */
-
-static void __init
-pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
-	struct pci_bus *bus;
-	int i;
-	struct resource *res, *pr;
-
-	/* Depth-First Search on bus tree */
-	list_for_each_entry(bus, bus_list, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL || !res->flags
-			    || res->start > res->end)
-				continue;
-			if (bus->parent == NULL)
-				pr = (res->flags & IORESOURCE_IO)?
-					&ioport_resource: &iomem_resource;
-			else {
-				pr = pci_find_parent_resource(bus->self, res);
-				if (pr == res) {
-					/* this happens when the generic PCI
-					 * code (wrongly) decides that this
-					 * bridge is transparent  -- paulus
-					 */
-					continue;
-				}
-			}
-
-			DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
-				(unsigned long long)res->start,
-				(unsigned long long)res->end, res->flags, pr);
-			if (pr) {
-				if (request_resource(pr, res) == 0)
-					continue;
-				/*
-				 * Must be a conflict with an existing entry.
-				 * Move that entry (or entries) under the
-				 * bridge resource and try again.
-				 */
-				if (reparent_resources(pr, res) == 0)
-					continue;
-			}
-			printk(KERN_ERR "PCI: Cannot allocate resource region "
-			       "%d of PCI bridge %d\n", i, bus->number);
-			if (pci_relocate_bridge_resource(bus, i))
-				bus->resource[i] = NULL;
-		}
-		pcibios_allocate_bus_resources(&bus->children);
-	}
-}
-
-/*
- * Reparent resource children of pr that conflict with res
- * under res, and make res replace those children.
- */
-static int __init
-reparent_resources(struct resource *parent, struct resource *res)
-{
-	struct resource *p, **pp;
-	struct resource **firstpp = NULL;
-
-	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
-		if (p->end < res->start)
-			continue;
-		if (res->end < p->start)
-			break;
-		if (p->start < res->start || p->end > res->end)
-			return -1;	/* not completely contained */
-		if (firstpp == NULL)
-			firstpp = pp;
-	}
-	if (firstpp == NULL)
-		return -1;	/* didn't find any conflicting entries? */
-	res->parent = parent;
-	res->child = *firstpp;
-	res->sibling = *pp;
-	*firstpp = res;
-	*pp = NULL;
-	for (p = res->child; p != NULL; p = p->sibling) {
-		p->parent = res;
-		DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
-			p->name, (unsigned long long)p->start,
-			(unsigned long long)p->end, res->name);
-	}
-	return 0;
-}
-
-/*
- * A bridge has been allocated a range which is outside the range
- * of its parent bridge, so it needs to be moved.
- */
-static int __init
-pci_relocate_bridge_resource(struct pci_bus *bus, int i)
-{
-	struct resource *res, *pr, *conflict;
-	unsigned long try, size;
-	int j;
-	struct pci_bus *parent = bus->parent;
-
-	if (parent == NULL) {
-		/* shouldn't ever happen */
-		printk(KERN_ERR "PCI: can't move host bridge resource\n");
-		return -1;
-	}
-	res = bus->resource[i];
-	if (res == NULL)
-		return -1;
-	pr = NULL;
-	for (j = 0; j < 4; j++) {
-		struct resource *r = parent->resource[j];
-		if (!r)
-			continue;
-		if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
-			continue;
-		if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
-			pr = r;
-			break;
-		}
-		if (res->flags & IORESOURCE_PREFETCH)
-			pr = r;
-	}
-	if (pr == NULL)
-		return -1;
-	size = res->end - res->start;
-	if (pr->start > pr->end || size > pr->end - pr->start)
-		return -1;
-	try = pr->end;
-	for (;;) {
-		res->start = try - size;
-		res->end = try;
-		if (probe_resource(bus->parent, pr, res, &conflict) == 0)
-			break;
-		if (conflict->start <= pr->start + size)
-			return -1;
-		try = conflict->start - 1;
-	}
-	if (request_resource(pr, res)) {
-		DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
-			(unsigned long long)res->start,
-			(unsigned long long)res->end);
-		return -1;		/* "can't happen" */
-	}
-	update_bridge_base(bus, i);
-	printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
-		bus->number, i, (unsigned long long)res->start,
-		(unsigned long long)res->end);
-	return 0;
-}
-
-static int __init
-probe_resource(struct pci_bus *parent, struct resource *pr,
-	       struct resource *res, struct resource **conflict)
-{
-	struct pci_bus *bus;
-	struct pci_dev *dev;
-	struct resource *r;
-	int i;
-
-	for (r = pr->child; r != NULL; r = r->sibling) {
-		if (r->end >= res->start && res->end >= r->start) {
-			*conflict = r;
-			return 1;
-		}
-	}
-	list_for_each_entry(bus, &parent->children, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((r = bus->resource[i]) == NULL)
-				continue;
-			if (!r->flags || r->start > r->end || r == res)
-				continue;
-			if (pci_find_parent_resource(bus->self, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	list_for_each_entry(dev, &parent->devices, bus_list) {
-		for (i = 0; i < 6; ++i) {
-			r = &dev->resource[i];
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;
-			if (pci_find_parent_resource(dev, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init
-update_bridge_base(struct pci_bus *bus, int i)
-{
-	struct resource *res = bus->resource[i];
-	u8 io_base_lo, io_limit_lo;
-	u16 mem_base, mem_limit;
-	u16 cmd;
-	unsigned long start, end, off;
-	struct pci_dev *dev = bus->self;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (!hose) {
-		printk("update_bridge_base: no hose?\n");
-		return;
-	}
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	pci_write_config_word(dev, PCI_COMMAND,
-			      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
-	if (res->flags & IORESOURCE_IO) {
-		off = (unsigned long) hose->io_base_virt - isa_io_base;
-		start = res->start - off;
-		end = res->end - off;
-		io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
-		io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
-		if (end > 0xffff) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
-					      start >> 16);
-			pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
-					      end >> 16);
-			io_base_lo |= PCI_IO_RANGE_TYPE_32;
-		} else
-			io_base_lo |= PCI_IO_RANGE_TYPE_16;
-		pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
-		pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == IORESOURCE_MEM) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
-		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
-
-	} else {
-		DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
-		    pci_name(dev), i, res->flags);
-	}
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-static inline void alloc_resource(struct pci_dev *dev, int idx)
-{
-	struct resource *pr, *r = &dev->resource[idx];
-
-	DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
-	    pci_name(dev), idx, (unsigned long long)r->start,
-	    (unsigned long long)r->end, r->flags);
-	pr = pci_find_parent_resource(dev, r);
-	if (!pr || request_resource(pr, r) < 0) {
-		printk(KERN_ERR "PCI: Cannot allocate resource region %d"
-		       " of device %s\n", idx, pci_name(dev));
-		if (pr)
-			DBG("PCI:  parent is %p: %016llx-%016llx (f=%lx)\n",
-				pr, (unsigned long long)pr->start,
-				(unsigned long long)pr->end, pr->flags);
-		/* We'll assign a new address later */
-		r->flags |= IORESOURCE_UNSET;
-		r->end -= r->start;
-		r->start = 0;
-	}
-}
-
-static void __init
-pcibios_allocate_resources(int pass)
-{
-	struct pci_dev *dev = NULL;
-	int idx, disabled;
-	u16 command;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-			if (r->parent)		/* Already allocated */
-				continue;
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;	/* Not assigned at all */
-			if (r->flags & IORESOURCE_IO)
-				disabled = !(command & PCI_COMMAND_IO);
-			else
-				disabled = !(command & PCI_COMMAND_MEMORY);
-			if (pass == disabled)
-				alloc_resource(dev, idx);
-		}
-		if (pass)
-			continue;
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
-			/* Turn the ROM off, leave the resource region, but keep it unregistered. */
-			u32 reg;
-			DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
-			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
-		}
-	}
-}
-
-static void __init
-pcibios_assign_resources(void)
-{
-	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-
-			/*
-			 * We shall assign a new address to this resource,
-			 * either because the BIOS (sic) forgot to do so
-			 * or because we have decided the old address was
-			 * unusable for some reason.
-			 */
-			if ((r->flags & IORESOURCE_UNSET) && r->end &&
-			    (!ppc_md.pcibios_enable_device_hook ||
-			     !ppc_md.pcibios_enable_device_hook(dev, 1))) {
-				r->flags &= ~IORESOURCE_UNSET;
-				pci_assign_resource(dev, idx);
-			}
-		}
-
-#if 0 /* don't assign ROMs */
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		r->end -= r->start;
-		r->start = 0;
-		if (r->end)
-			pci_assign_resource(dev, PCI_ROM_RESOURCE);
-#endif
-	}
-}
-
-
-static int next_controller_index;
-
-struct pci_controller * __init
-pcibios_alloc_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
-	memset(hose, 0, sizeof(struct pci_controller));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	hose->index = next_controller_index++;
-
-	return hose;
-}
-
-void pcibios_make_OF_bus_map(void)
-{
-}
-
-static int __init
-pcibios_init(void)
-{
-	struct pci_controller *hose;
-	struct pci_bus *bus;
-	int next_busno;
-
-	printk(KERN_INFO "PCI: Probing PCI hardware\n");
-
-	/* Scan all of the recorded PCI controllers.  */
-	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-		if (pci_assign_all_buses)
-			hose->first_busno = next_busno;
-		hose->last_busno = 0xff;
-		bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
-		hose->last_busno = bus->subordinate;
-		if (pci_assign_all_buses || next_busno <= hose->last_busno)
-			next_busno = hose->last_busno + pcibios_assign_bus_offset;
-	}
-	pci_bus_count = next_busno;
-
-	/* OpenFirmware based machines need a map of OF bus
-	 * numbers vs. kernel bus numbers since we may have to
-	 * remap them.
-	 */
-	if (pci_assign_all_buses && have_of)
-		pcibios_make_OF_bus_map();
-
-	/* Do machine dependent PCI interrupt routing */
-	if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
-		pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
-
-	/* Allocate and assign resources */
-	pcibios_allocate_bus_resources(&pci_root_buses);
-	pcibios_allocate_resources(0);
-	pcibios_allocate_resources(1);
-	pcibios_assign_resources();
-
-	/* Call machine dependent post-init code */
-	if (ppc_md.pcibios_after_init)
-		ppc_md.pcibios_after_init();
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-unsigned char __init
-common_swizzle(struct pci_dev *dev, unsigned char *pinp)
-{
-	struct pci_controller *hose = dev->sysdata;
-
-	if (dev->bus->number != hose->first_busno) {
-		u8 pin = *pinp;
-		do {
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-			/* Move up the chain of bridges. */
-			dev = dev->bus->self;
-		} while (dev->bus->self);
-		*pinp = pin;
-
-		/* The slot is the idsel of the last bridge. */
-	}
-	return PCI_SLOT(dev->devfn);
-}
-
-unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
-			     unsigned long start, unsigned long size)
-{
-	return start;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
-	unsigned long io_offset;
-	struct resource *res;
-	int i;
-
-	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	if (bus->parent == NULL) {
-		/* This is a host bridge - fill in its resources */
-		hose->bus = bus;
-
-		bus->resource[0] = res = &hose->io_resource;
-		if (!res->flags) {
-			if (io_offset)
-				printk(KERN_ERR "I/O resource not set for host"
-				       " bridge %d\n", hose->index);
-			res->start = 0;
-			res->end = IO_SPACE_LIMIT;
-			res->flags = IORESOURCE_IO;
-		}
-		res->start += io_offset;
-		res->end += io_offset;
-
-		for (i = 0; i < 3; ++i) {
-			res = &hose->mem_resources[i];
-			if (!res->flags) {
-				if (i > 0)
-					continue;
-				printk(KERN_ERR "Memory resource not set for "
-				       "host bridge %d\n", hose->index);
-				res->start = hose->pci_mem_offset;
-				res->end = ~0U;
-				res->flags = IORESOURCE_MEM;
-			}
-			bus->resource[i+1] = res;
-		}
-	} else {
-		/* This is a subordinate bridge */
-		pci_read_bridge_bases(bus);
-
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL)
-				continue;
-			if (!res->flags)
-				continue;
-			if (io_offset && (res->flags & IORESOURCE_IO)) {
-				res->start += io_offset;
-				res->end += io_offset;
-			} else if (hose->pci_mem_offset
-				   && (res->flags & IORESOURCE_MEM)) {
-				res->start += hose->pci_mem_offset;
-				res->end += hose->pci_mem_offset;
-			}
-		}
-	}
-
-	if (ppc_md.pcibios_fixup_bus)
-		ppc_md.pcibios_fixup_bus(bus);
-}
-
-char __init *pcibios_setup(char *str)
-{
-	return str;
-}
-
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	/* XXX FIXME - update OF device tree node interrupt property */
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (ppc_md.pcibios_enable_device_hook)
-		if (ppc_md.pcibios_enable_device_hook(dev, 0))
-			return -EINVAL;
-
-	return pci_enable_resources(dev, mask);
-}
-
-struct pci_controller*
-pci_bus_to_hose(int bus)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next)
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	return NULL;
-}
-
-void __iomem *
-pci_bus_io_base(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return NULL;
-	return hose->io_base_virt;
-}
-
-unsigned long
-pci_bus_io_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->io_base_phys;
-}
-
-unsigned long
-pci_bus_mem_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->pci_mem_offset;
-}
-
-unsigned long
-pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
-{
-	/* Hack alert again ! See comments in chrp_pci.c
-	 */
-	struct pci_controller* hose =
-		(struct pci_controller *)pdev->sysdata;
-	if (hose && res->flags & IORESOURCE_MEM)
-		return res->start - hose->pci_mem_offset;
-	/* We may want to do something with IOs here... */
-	return res->start;
-}
-
-
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       resource_size_t *offset,
-					       enum pci_mmap_state mmap_state)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	unsigned long io_offset = 0;
-	int i, res_bit;
-
-	if (hose == 0)
-		return NULL;		/* should never happen */
-
-	/* If memory, add on the PCI bridge address offset */
-	if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
-		*offset += hose->pci_mem_offset;
-#endif
-		res_bit = IORESOURCE_MEM;
-	} else {
-		io_offset = hose->io_base_virt - ___IO_BASE;
-		*offset += io_offset;
-		res_bit = IORESOURCE_IO;
-	}
-
-	/*
-	 * Check that the offset requested corresponds to one of the
-	 * resources of the device.
-	 */
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		struct resource *rp = &dev->resource[i];
-		int flags = rp->flags;
-
-		/* treat ROM as memory (should be already) */
-		if (i == PCI_ROM_RESOURCE)
-			flags |= IORESOURCE_MEM;
-
-		/* Active and same type? */
-		if ((flags & res_bit) == 0)
-			continue;
-
-		/* In the range of this resource? */
-		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
-			continue;
-
-		/* found it! construct the final physical address */
-		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
-		return rp;
-	}
-
-	return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
-				      pgprot_t protection,
-				      enum pci_mmap_state mmap_state,
-				      int write_combine)
-{
-	unsigned long prot = pgprot_val(protection);
-
-	/* Write combine is always 0 on non-memory space mappings. On
-	 * memory space, if the user didn't pass 1, we check for a
-	 * "prefetchable" resource. This is a bit hackish, but we use
-	 * this to workaround the inability of /sysfs to provide a write
-	 * combine bit
-	 */
-	if (mmap_state != pci_mmap_mem)
-		write_combine = 0;
-	else if (write_combine == 0) {
-		if (rp->flags & IORESOURCE_PREFETCH)
-			write_combine = 1;
-	}
-
-	/* XXX would be nice to have a way to ask for write-through */
-	prot |= _PAGE_NO_CACHE;
-	if (write_combine)
-		prot &= ~_PAGE_GUARDED;
-	else
-		prot |= _PAGE_GUARDED;
-
-	printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
-		(unsigned long long)rp->start, prot);
-
-	return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
-				  unsigned long pfn,
-				  unsigned long size,
-				  pgprot_t protection)
-{
-	struct pci_dev *pdev = NULL;
-	struct resource *found = NULL;
-	unsigned long prot = pgprot_val(protection);
-	unsigned long offset = pfn << PAGE_SHIFT;
-	int i;
-
-	if (page_is_ram(pfn))
-		return prot;
-
-	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
-	for_each_pci_dev(pdev) {
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-			struct resource *rp = &pdev->resource[i];
-			int flags = rp->flags;
-
-			/* Active and same type? */
-			if ((flags & IORESOURCE_MEM) == 0)
-				continue;
-			/* In the range of this resource? */
-			if (offset < (rp->start & PAGE_MASK) ||
-			    offset > rp->end)
-				continue;
-			found = rp;
-			break;
-		}
-		if (found)
-			break;
-	}
-	if (found) {
-		if (found->flags & IORESOURCE_PREFETCH)
-			prot &= ~_PAGE_GUARDED;
-		pci_dev_put(pdev);
-	}
-
-	DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
-	return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture.  The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state,
-			int write_combine)
-{
-	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
-	struct resource *rp;
-	int ret;
-
-	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
-	if (rp == NULL)
-		return -EINVAL;
-
-	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
-						  vma->vm_page_prot,
-						  mmap_state, write_combine);
-
-	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
-	return ret;
-}
-
-/* Obsolete functions. Should be removed once the symbios driver
- * is fixed
- */
-unsigned long
-phys_to_bus(unsigned long pa)
-{
-	struct pci_controller *hose;
-	int i;
-
-	for (hose = hose_head; hose; hose = hose->next) {
-		for (i = 0; i < 3; ++i) {
-			if (pa >= hose->mem_resources[i].start
-			    && pa <= hose->mem_resources[i].end) {
-				/*
-				 * XXX the hose->pci_mem_offset really
-				 * only applies to mem_resources[0].
-				 * We need a way to store an offset for
-				 * the others.  -- paulus
-				 */
-				if (i == 0)
-					pa -= hose->pci_mem_offset;
-				return pa;
-			}
-		}
-	}
-	/* hmmm, didn't find it */
-	return 0;
-}
-
-unsigned long
-pci_phys_to_bus(unsigned long pa, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return pa;
-	return pa - hose->pci_mem_offset;
-}
-
-unsigned long
-pci_bus_to_phys(unsigned int ba, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return ba;
-	return ba + hose->pci_mem_offset;
-}
-
-/* Provide information on locations of various I/O regions in physical
- * memory.  Do this on a per-card basis so that we choose the right
- * root bridge.
- * Note that the returned IO or memory base is a physical address
- */
-
-long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
-{
-	struct pci_controller* hose;
-	long result = -EOPNOTSUPP;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return -ENODEV;
-
-	switch (which) {
-	case IOBASE_BRIDGE_NUMBER:
-		return (long)hose->first_busno;
-	case IOBASE_MEMORY:
-		return (long)hose->pci_mem_offset;
-	case IOBASE_IO:
-		return (long)hose->io_base_phys;
-	case IOBASE_ISA_IO:
-		return (long)isa_io_base;
-	case IOBASE_ISA_MEM:
-		return (long)isa_mem_base;
-	}
-
-	return result;
-}
-
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
-			  const struct resource *rsrc,
-			  resource_size_t *start, resource_size_t *end)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	resource_size_t offset = 0;
-
-	if (hose == NULL)
-		return;
-
-	if (rsrc->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	/* We pass a fully fixed up address to userland for MMIO instead of
-	 * a BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem !
-	 *
-	 * That means that we'll have potentially 64 bits values where some
-	 * userland apps only expect 32 (like X itself since it thinks only
-	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
-	 * 32 bits CHRPs :-(
-	 *
-	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
-	 * has been fixed (and the fix spread enough), we can re-enable the
-	 * 2 lines below and pass down a BAR value to userland. In that case
-	 * we'll also have to re-enable the matching code in
-	 * __pci_mmap_make_offset().
-	 *
-	 * BenH.
-	 */
-#if 0
-	else if (rsrc->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-#endif
-
-	*start = rsrc->start - offset;
-	*end = rsrc->end - offset;
-}
-
-void __init pci_init_resource(struct resource *res, resource_size_t start,
-			      resource_size_t end, int flags, char *name)
-{
-	res->start = start;
-	res->end = end;
-	res->flags = flags;
-	res->name = name;
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start(dev, bar);
-	resource_size_t len = pci_resource_len(dev, bar);
-	unsigned long flags = pci_resource_flags(dev, bar);
-
-	if (!len)
-		return NULL;
-	if (max && len > max)
-		len = max;
-	if (flags & IORESOURCE_IO)
-		return ioport_map(start, len);
-	if (flags & IORESOURCE_MEM)
-		/* Not checking IORESOURCE_CACHEABLE because PPC does
-		 * not currently distinguish between ioremap and
-		 * ioremap_nocache.
-		 */
-		return ioremap(start, len);
-	/* What? */
-	return NULL;
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(pci_iomap);
-EXPORT_SYMBOL(pci_iounmap);
-
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next) {
-		unsigned int size = hose->io_resource.end -
-			hose->io_resource.start + 1;
-		if (address >= hose->io_base_phys &&
-		    address < (hose->io_base_phys + size)) {
-			unsigned long base =
-				(unsigned long)hose->io_base_virt - _IO_BASE;
-			return base + (address - hose->io_base_phys);
-		}
-	}
-	return (unsigned int)-1;
-}
-EXPORT_SYMBOL(pci_address_to_pio);
-
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	null_read_config,
-	null_write_config
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
diff --git a/arch/ppc/kernel/ppc-stub.c b/arch/ppc/kernel/ppc-stub.c
deleted file mode 100644
index 5f9ee7bb67ec..000000000000
--- a/arch/ppc/kernel/ppc-stub.c
+++ /dev/null
@@ -1,866 +0,0 @@
-/*
- * ppc-stub.c:  KGDB support for the Linux kernel.
- *
- * adapted from arch/sparc/kernel/sparc-stub.c for the PowerPC
- * some stuff borrowed from Paul Mackerras' xmon
- * Copyright (C) 1998 Michael AK Tesch (tesch@cs.wisc.edu)
- *
- * Modifications to run under Linux
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * This file originally came from the gdb sources, and the
- * copyright notices have been retained below.
- */
-
-/****************************************************************************
-
-		THIS SOFTWARE IS NOT COPYRIGHTED
-
-   HP offers the following for use in the public domain.  HP makes no
-   warranty with regard to the software or its performance and the
-   user accepts the software "AS IS" with all faults.
-
-   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
-   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
- *
- *  Module name: remcom.c $
- *  Revision: 1.34 $
- *  Date: 91/03/09 12:29:49 $
- *  Contributor:     Lake Stevens Instrument Division$
- *
- *  Description:     low level support for gdb debugger. $
- *
- *  Considerations:  only works on target hardware $
- *
- *  Written by:      Glenn Engel $
- *  ModuleState:     Experimental $
- *
- *  NOTES:           See Below $
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  This code has been extensively tested on the Fujitsu SPARClite demo board.
- *
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a trap #1.
- *
- *************
- *
- *    The following gdb commands are supported:
- *
- * command          function		          Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- ****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/sysrq.h>
-
-#include <asm/cacheflush.h>
-#include <asm/system.h>
-#include <asm/signal.h>
-#include <asm/kgdb.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-void breakinst(void);
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-static char remcomInBuffer[BUFMAX];
-static char remcomOutBuffer[BUFMAX];
-
-static int initialized;
-static int kgdb_active;
-static int kgdb_started;
-static u_int fault_jmp_buf[100];
-static int kdebug;
-
-
-static const char hexchars[]="0123456789abcdef";
-
-/* Place where we save old trap entries for restoration - sparc*/
-/* struct tt_entry kgdb_savettable[256]; */
-/* typedef void (*trapfunc_t)(void); */
-
-static void kgdb_fault_handler(struct pt_regs *regs);
-static int handle_exception (struct pt_regs *regs);
-
-#if 0
-/* Install an exception handler for kgdb */
-static void exceptionHandler(int tnum, unsigned int *tfunc)
-{
-	/* We are dorking with a live trap table, all irqs off */
-}
-#endif
-
-int
-kgdb_setjmp(long *buf)
-{
-	asm ("mflr 0; stw 0,0(%0);"
-	     "stw 1,4(%0); stw 2,8(%0);"
-	     "mfcr 0; stw 0,12(%0);"
-	     "stmw 13,16(%0)"
-	     : : "r" (buf));
-	/* XXX should save fp regs as well */
-	return 0;
-}
-void
-kgdb_longjmp(long *buf, int val)
-{
-	if (val == 0)
-		val = 1;
-	asm ("lmw 13,16(%0);"
-	     "lwz 0,12(%0); mtcrf 0x38,0;"
-	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	     "mtlr 0; mr 3,%1"
-	     : : "r" (buf), "r" (val));
-}
-/* Convert ch from a hex digit to an int */
-static int
-hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- */
-static unsigned char *
-mem2hex(const char *mem, char *buf, int count)
-{
-	unsigned char ch;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** load instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = *(unsigned short *)mem;
-			mem += 2;
-			*buf++ = hexchars[(tmp_s >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 4) & 0xf];
-			*buf++ = hexchars[tmp_s & 0xf];
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = *(unsigned int *)mem;
-			mem += 4;
-			*buf++ = hexchars[(tmp_l >> 28) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 24) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 20) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 16) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 4) & 0xf];
-			*buf++ = hexchars[tmp_l & 0xf];
-
-		} else {
-			while (count-- > 0) {
-				ch = *mem++;
-				*buf++ = hexchars[ch >> 4];
-				*buf++ = hexchars[ch & 0xf];
-			}
-		}
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	*buf = 0;
-	return buf;
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written.
-*/
-static char *
-hex2mem(char *buf, char *mem, int count)
-{
-	unsigned char ch;
-	int i;
-	char *orig_mem;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	orig_mem = mem;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** store instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = hex(*buf++) << 12;
-			tmp_s |= hex(*buf++) << 8;
-			tmp_s |= hex(*buf++) << 4;
-			tmp_s |= hex(*buf++);
-
-			*(unsigned short *)mem = tmp_s;
-			mem += 2;
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = hex(*buf++) << 28;
-			tmp_l |= hex(*buf++) << 24;
-			tmp_l |= hex(*buf++) << 20;
-			tmp_l |= hex(*buf++) << 16;
-			tmp_l |= hex(*buf++) << 12;
-			tmp_l |= hex(*buf++) << 8;
-			tmp_l |= hex(*buf++) << 4;
-			tmp_l |= hex(*buf++);
-
-			*(unsigned long *)mem = tmp_l;
-			mem += 4;
-
-		} else {
-			for (i=0; i<count; i++) {
-				ch = hex(*buf++) << 4;
-				ch |= hex(*buf++);
-				*mem++ = ch;
-			}
-		}
-
-
-		/*
-		** Flush the data cache, invalidate the instruction cache.
-		*/
-		flush_icache_range((int)orig_mem, (int)orig_mem + count - 1);
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	return mem;
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int
-hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-		while (**ptr) {
-			hexValue = hex(**ptr);
-			if (hexValue < 0)
-				break;
-
-			*intValue = (*intValue << 4) | hexValue;
-			numChars ++;
-
-			(*ptr)++;
-		}
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-
-	return (numChars);
-}
-
-/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/* wait around for the start character, ignore all other
-		 * characters */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-
-		count = 0;
-
-		/* now, read until a # or end of buffer is found */
-		while (count < BUFMAX) {
-			ch = getDebugChar() & 0x7f;
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-				/* if a sequence char is present, reply the ID */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-					/* remove sequence chars from buffer */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	} while (checksum != xmitcsum);
-}
-
-/* send the packet in buffer. */
-static void putpacket(unsigned char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch, recv;
-
-	/* $<packet info>#<checksum>. */
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count])) {
-			putDebugChar(ch);
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-		recv = getDebugChar();
-	} while ((recv & 0x7f) != '+');
-}
-
-static void kgdb_flush_cache_all(void)
-{
-	flush_instruction_cache();
-}
-
-/* Set up exception handlers for tracing and breakpoints
- * [could be called kgdb_init()]
- */
-void set_debug_traps(void)
-{
-#if 0
-	unsigned char c;
-
-	save_and_cli(flags);
-
-	/* In case GDB is started before us, ack any packets (presumably
-	 * "$?#xx") sitting there.
-	 *
-	 * I've found this code causes more problems than it solves,
-	 * so that's why it's commented out.  GDB seems to work fine
-	 * now starting either before or after the kernel   -bwb
-	 */
-
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-#endif
-	debugger = kgdb;
-	debugger_bpt = kgdb_bpt;
-	debugger_sstep = kgdb_sstep;
-	debugger_iabr_match = kgdb_iabr_match;
-	debugger_dabr_match = kgdb_dabr_match;
-
-	initialized = 1;
-}
-
-static void kgdb_fault_handler(struct pt_regs *regs)
-{
-	kgdb_longjmp((long*)fault_jmp_buf, 1);
-}
-
-int kgdb_bpt(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-int kgdb_sstep(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-void kgdb(struct pt_regs *regs)
-{
-	handle_exception(regs);
-}
-
-int kgdb_iabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support iabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-int kgdb_dabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support dabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-/* Convert the hardware trap type code to a unix signal number. */
-/*
- * This table contains the mapping between PowerPC hardware trap types, and
- * signals, which are primarily what GDB understands.
- */
-static struct hard_trap_info
-{
-	unsigned int tt;		/* Trap type code for powerpc */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	{ 0x100, SIGINT  },		/* critical input interrupt */
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* data storage */
-	{ 0x400, SIGBUS  },		/* instruction storage */
-	{ 0x500, SIGINT  },		/* interrupt */
-	{ 0x600, SIGBUS  },		/* alignment */
-	{ 0x700, SIGILL  },		/* program */
-	{ 0x800, SIGILL  },		/* reserved */
-	{ 0x900, SIGILL  },		/* reserved */
-	{ 0xa00, SIGILL  },		/* reserved */
-	{ 0xb00, SIGILL  },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGILL  },		/* reserved */
-	{ 0xe00, SIGILL  },		/* reserved */
-	{ 0xf00, SIGILL  },		/* reserved */
-	/*
-	** 0x1000  PIT
-	** 0x1010  FIT
-	** 0x1020  watchdog
-	** 0x1100  data TLB miss
-	** 0x1200  instruction TLB miss
-	*/
-	{ 0x2002, SIGTRAP},		/* debug */
-#else
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* address error (store) */
-	{ 0x400, SIGBUS },		/* instruction bus error */
-	{ 0x500, SIGINT },		/* interrupt */
-	{ 0x600, SIGBUS },		/* alingment */
-	{ 0x700, SIGTRAP },		/* breakpoint trap */
-	{ 0x800, SIGFPE },		/* fpu unavail */
-	{ 0x900, SIGALRM },		/* decrementer */
-	{ 0xa00, SIGILL },		/* reserved */
-	{ 0xb00, SIGILL },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGTRAP },		/* single-step/watch */
-	{ 0xe00, SIGFPE },		/* fp assist */
-#endif
-	{ 0, 0}				/* Must be last */
-
-};
-
-static int computeSignal(unsigned int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP; /* default for things we don't know about */
-}
-
-#define PC_REGNUM 64
-#define SP_REGNUM 1
-
-/*
- * This function does all command processing for interfacing to gdb.
- */
-static int
-handle_exception (struct pt_regs *regs)
-{
-	int sigval;
-	int addr;
-	int length;
-	char *ptr;
-	unsigned int msr;
-
-	/* We don't handle user-mode breakpoints. */
-	if (user_mode(regs))
-		return 0;
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		panic("kgdb longjump failed!\n");
-	}
-	if (kgdb_active) {
-		printk(KERN_ERR "interrupt while in kgdb, returning\n");
-		return 0;
-	}
-
-	kgdb_active = 1;
-	kgdb_started = 1;
-
-#ifdef KGDB_DEBUG
-	printk("kgdb: entering handle_exception; trap [0x%x]\n",
-			(unsigned int)regs->trap);
-#endif
-
-	kgdb_interruptible(0);
-	lock_kernel();
-	msr = mfmsr();
-	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
-
-	if (regs->nip == (unsigned long)breakinst) {
-		/* Skip over breakpoint trap insn */
-		regs->nip += 4;
-	}
-
-	/* reply to host that an exception has occurred */
-	sigval = computeSignal(regs->trap);
-	ptr = remcomOutBuffer;
-
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-	*ptr++ = hexchars[PC_REGNUM >> 4];
-	*ptr++ = hexchars[PC_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->nip, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = hexchars[SP_REGNUM >> 4];
-	*ptr++ = hexchars[SP_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex(((char *)regs) + SP_REGNUM*4, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = 0;
-
-	putpacket(remcomOutBuffer);
-	if (kdebug)
-		printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-
-	/* XXX We may want to add some features dealing with poking the
-	 * XXX page tables, ... (look at sparc-stub.c for more info)
-	 * XXX also required hacking to the gdb sources directly...
-	 */
-
-	while (1) {
-		remcomOutBuffer[0] = 0;
-
-		getpacket(remcomInBuffer);
-		switch (remcomInBuffer[0]) {
-		case '?': /* report most recent signal */
-			remcomOutBuffer[0] = 'S';
-			remcomOutBuffer[1] = hexchars[sigval >> 4];
-			remcomOutBuffer[2] = hexchars[sigval & 0xf];
-			remcomOutBuffer[3] = 0;
-			break;
-#if 0
-		case 'q': /* this screws up gdb for some reason...*/
-		{
-			extern long _start, sdata, __bss_start;
-
-			ptr = &remcomInBuffer[1];
-			if (strncmp(ptr, "Offsets", 7) != 0)
-				break;
-
-			ptr = remcomOutBuffer;
-			sprintf(ptr, "Text=%8.8x;Data=%8.8x;Bss=%8.8x",
-				&_start, &sdata, &__bss_start);
-			break;
-		}
-#endif
-		case 'd':
-			/* toggle debug flag */
-			kdebug ^= 1;
-			break;
-
-		case 'g':	/* return the value of the CPU registers.
-				 * some of them are non-PowerPC names :(
-				 * they are stored in gdb like:
-				 * struct {
-				 *     u32 gpr[32];
-				 *     f64 fpr[32];
-				 *     u32 pc, ps, cnd, lr; (ps=msr)
-				 *     u32 cnt, xer, mq;
-				 * }
-				 */
-		{
-			int i;
-			ptr = remcomOutBuffer;
-			/* General Purpose Regs */
-			ptr = mem2hex((char *)regs, ptr, 32 * 4);
-			/* Floating Point Regs - FIXME */
-			/*ptr = mem2hex((char *), ptr, 32 * 8);*/
-			for(i=0; i<(32*8*2); i++) { /* 2chars/byte */
-				ptr[i] = '0';
-			}
-			ptr += 32*8*2;
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = mem2hex((char *)&regs->nip, ptr, 4);
-			ptr = mem2hex((char *)&regs->msr, ptr, 4);
-			ptr = mem2hex((char *)&regs->ccr, ptr, 4);
-			ptr = mem2hex((char *)&regs->link, ptr, 4);
-			ptr = mem2hex((char *)&regs->ctr, ptr, 4);
-			ptr = mem2hex((char *)&regs->xer, ptr, 4);
-		}
-			break;
-
-		case 'G': /* set the value of the CPU registers */
-		{
-			ptr = &remcomInBuffer[1];
-
-			/*
-			 * If the stack pointer has moved, you should pray.
-			 * (cause only god can help you).
-			 */
-
-			/* General Purpose Regs */
-			hex2mem(ptr, (char *)regs, 32 * 4);
-
-			/* Floating Point Regs - FIXME?? */
-			/*ptr = hex2mem(ptr, ??, 32 * 8);*/
-			ptr += 32*8*2;
-
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = hex2mem(ptr, (char *)&regs->nip, 4);
-			ptr = hex2mem(ptr, (char *)&regs->msr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ccr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->link, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ctr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->xer, 4);
-
-			strcpy(remcomOutBuffer,"OK");
-		}
-			break;
-		case 'H':
-			/* don't do anything, yet, just acknowledge */
-			hexToInt(&ptr, &addr);
-			strcpy(remcomOutBuffer,"OK");
-			break;
-
-		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-				/* Try to read %x,%x.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, remcomOutBuffer,
-							length))
-					break;
-				strcpy(remcomOutBuffer, "E03");
-			} else
-				strcpy(remcomOutBuffer, "E01");
-			break;
-
-		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
-			/* Try to read '%x,%x:'.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)
-					&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length))
-					strcpy(remcomOutBuffer, "OK");
-				else
-					strcpy(remcomOutBuffer, "E03");
-				flush_icache_range(addr, addr+length);
-			} else
-				strcpy(remcomOutBuffer, "E02");
-			break;
-
-
-		case 'k': /* kill the program, actually just continue */
-		case 'c': /* cAA..AA  Continue; address AA..AA optional */
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &remcomInBuffer[1];
-			if (hexToInt(&ptr, &addr))
-				regs->nip = addr;
-
-/* Need to flush the instruction cache here, as we may have deposited a
- * breakpoint, and the icache probably has no way of knowing that a data ref to
- * some location may have changed something that is in the instruction cache.
- */
-			kgdb_flush_cache_all();
-			mtmsr(msr);
-
-			kgdb_interruptible(1);
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 's':
-			kgdb_flush_cache_all();
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC);
-			regs->msr |= MSR_DE;
-#else
-			regs->msr |= MSR_SE;
-#endif
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 'r':		/* Reset (if user process..exit ???)*/
-			panic("kgdb reset.");
-			break;
-		}			/* switch */
-		if (remcomOutBuffer[0] && kdebug) {
-			printk("remcomInBuffer: %s\n", remcomInBuffer);
-			printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-		}
-		/* reply to the request */
-		putpacket(remcomOutBuffer);
-	} /* while(1) */
-}
-
-/* This function will generate a breakpoint exception.  It is used at the
-   beginning of a program to sync up with a debugger and can be used
-   otherwise as a quick means to stop program execution and "break" into
-   the debugger. */
-
-void
-breakpoint(void)
-{
-	if (!initialized) {
-		printk("breakpoint() called b4 kgdb init\n");
-		return;
-	}
-
-	asm("	.globl breakinst	\n\
-	     breakinst: .long 0x7d821008");
-}
-
-#ifdef CONFIG_KGDB_CONSOLE
-/* Output string in GDB O-packet format if GDB has connected. If nothing
-   output, returns 0 (caller must then handle output). */
-int
-kgdb_output_string (const char* s, unsigned int count)
-{
-	char buffer[512];
-
-	if (!kgdb_started)
-		return 0;
-
-	count = (count <= (sizeof(buffer) / 2 - 2))
-		? count : (sizeof(buffer) / 2 - 2);
-
-	buffer[0] = 'O';
-	mem2hex (s, &buffer[1], count);
-	putpacket(buffer);
-
-	return 1;
-}
-#endif
-
-static void sysrq_handle_gdb(int key, struct pt_regs *pt_regs,
-			     struct tty_struct *tty)
-{
-	printk("Entering GDB stub\n");
-	breakpoint();
-}
-static struct sysrq_key_op sysrq_gdb_op = {
-        .handler        = sysrq_handle_gdb,
-        .help_msg       = "Gdb",
-        .action_msg     = "GDB",
-};
-
-static int gdb_register_sysrq(void)
-{
-	printk("Registering GDB sysrq handler\n");
-	register_sysrq_key('g', &sysrq_gdb_op);
-	return 0;
-}
-module_init(gdb_register_sysrq);
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
deleted file mode 100644
index 9ed36dd9cbff..000000000000
--- a/arch/ppc/kernel/ppc_htab.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * PowerPC hash table management proc entry.  Will show information
- * about the current hash table and will allow changes to it.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/sysctl.h>
-#include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/threads.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/mmu.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/system.h>
-#include <asm/reg.h>
-
-static int ppc_htab_show(struct seq_file *m, void *v);
-static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
-			      size_t count, loff_t *ppos);
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern unsigned long _SDR1;
-extern unsigned long htab_reloads;
-extern unsigned long htab_preloads;
-extern unsigned long htab_evicts;
-extern unsigned long pte_misses;
-extern unsigned long pte_errors;
-extern unsigned int primary_pteg_full;
-extern unsigned int htab_hash_searches;
-
-static int ppc_htab_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ppc_htab_show, NULL);
-}
-
-const struct file_operations ppc_htab_operations = {
-	.open		= ppc_htab_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_htab_write,
-	.release	= single_release,
-};
-
-static char *pmc1_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & (0x7f<<7) )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC1_CYCLES:
-		return "cycles";
-	case MMCR0_PMC1_ICACHEMISS:
-		return "ic miss";
-	case MMCR0_PMC1_DTLB:
-		return "dtlb miss";
-	default:
-		return "unknown";
-	}
-}
-
-static char *pmc2_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & 0x3f )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC2_CYCLES:
-		return "cycles";
-	case MMCR0_PMC2_DCACHEMISS:
-		return "dc miss";
-	case MMCR0_PMC2_ITLB:
-		return "itlb miss";
-	case MMCR0_PMC2_LOADMISSTIME:
-		return "load miss time";
-	default:
-		return "unknown";
-	}
-}
-
-/*
- * print some useful info about the hash table.  This function
- * is _REALLY_ slow (see the nested for loops below) but nothing
- * in here should be really timing critical. -- Cort
- */
-static int ppc_htab_show(struct seq_file *m, void *v)
-{
-	unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU)
-	unsigned int kptes = 0, uptes = 0;
-	PTE *ptr;
-#endif /* CONFIG_PPC_STD_MMU */
-
-	if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-		mmcr0 = mfspr(SPRN_MMCR0);
-		pmc1 = mfspr(SPRN_PMC1);
-		pmc2 = mfspr(SPRN_PMC2);
-		seq_printf(m,
-			      "604 Performance Monitoring\n"
-			      "MMCR0\t\t: %08lx %s%s ",
-			      mmcr0,
-			      ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
-			      ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
-		seq_printf(m,
-			      "\nPMC1\t\t: %08lx (%s)\n"
-			      "PMC2\t\t: %08lx (%s)\n",
-			      pmc1, pmc1_lookup(mmcr0),
-			      pmc2, pmc2_lookup(mmcr0));
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* if we don't have a htab */
-	if ( Hash_size == 0 ) {
-		seq_printf(m, "No Hash Table used\n");
-		return 0;
-	}
-
-	for (ptr = Hash; ptr < Hash_end; ptr++) {
-		unsigned int mctx, vsid;
-
-		if (!ptr->v)
-			continue;
-		/* undo the esid skew */
-		vsid = ptr->vsid;
-		mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
-		if (mctx == 0)
-			kptes++;
-		else
-			uptes++;
-	}
-
-	seq_printf(m,
-		      "PTE Hash Table Information\n"
-		      "Size\t\t: %luKb\n"
-		      "Buckets\t\t: %lu\n"
- 		      "Address\t\t: %08lx\n"
-		      "Entries\t\t: %lu\n"
-		      "User ptes\t: %u\n"
-		      "Kernel ptes\t: %u\n"
-		      "Percent full\t: %lu%%\n"
-                      , (unsigned long)(Hash_size>>10),
-		      (Hash_size/(sizeof(PTE)*8)),
-		      (unsigned long)Hash,
-		      Hash_size/sizeof(PTE)
-                      , uptes,
-		      kptes,
-		      ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-		);
-
-	seq_printf(m,
-		      "Reloads\t\t: %lu\n"
-		      "Preloads\t: %lu\n"
-		      "Searches\t: %u\n"
-		      "Overflows\t: %u\n"
-		      "Evicts\t\t: %lu\n",
-		      htab_reloads, htab_preloads, htab_hash_searches,
-		      primary_pteg_full, htab_evicts);
-#endif /* CONFIG_PPC_STD_MMU */
-
-	seq_printf(m,
-		      "Non-error misses: %lu\n"
-		      "Error misses\t: %lu\n",
-		      pte_misses, pte_errors);
-	return 0;
-}
-
-/*
- * Allow user to define performance counters and resize the hash table
- */
-static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
-			      size_t count, loff_t *ppos)
-{
-#ifdef CONFIG_PPC_STD_MMU
-	unsigned long tmp;
-	char buffer[16];
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-	if (strncpy_from_user(buffer, ubuffer, 15))
-		return -EFAULT;
-	buffer[15] = 0;
-
-	/* don't set the htab size for now */
-	if ( !strncmp( buffer, "size ", 5) )
-		return -EBUSY;
-
-	if ( !strncmp( buffer, "reset", 5) )
-	{
-		if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-			/* reset PMC1 and PMC2 */
-			mtspr(SPRN_PMC1, 0);
-			mtspr(SPRN_PMC2, 0);
-		}
-		htab_reloads = 0;
-		htab_evicts = 0;
-		pte_misses = 0;
-		pte_errors = 0;
-	}
-
-	/* Everything below here requires the performance monitor feature. */
-	if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
-		return count;
-
-	/* turn off performance monitoring */
-	if ( !strncmp( buffer, "off", 3) )
-	{
-		mtspr(SPRN_MMCR0, 0);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "user", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "kernel", 6) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	/* PMC1 values */
-	if ( !strncmp( buffer, "dtlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	if ( !strncmp( buffer, "ic miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	/* PMC2 values */
-	if ( !strncmp( buffer, "load miss time", 14) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0),
-		       "i" (MMCR0_PMC2_LOADMISSTIME),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "itlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "dc miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	return count;
-#else /* CONFIG_PPC_STD_MMU */
-	return 0;
-#endif /* CONFIG_PPC_STD_MMU */
-}
-
-int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
-		  void __user *buffer_arg, size_t *lenp, loff_t *ppos)
-{
-	int vleft, first=1, len, left, val;
-	char __user *buffer = (char __user *) buffer_arg;
-	#define TMPBUFLEN 256
-	char buf[TMPBUFLEN], *p;
-	static const char *sizestrings[4] = {
-		"2MB", "256KB", "512KB", "1MB"
-	};
-	static const char *clockstrings[8] = {
-		"clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
-		"+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
-	};
-	static const char *typestrings[4] = {
-		"flow-through burst SRAM", "reserved SRAM",
-		"pipelined burst SRAM", "pipelined late-write SRAM"
-	};
-	static const char *holdstrings[4] = {
-		"0.5", "1.0", "(reserved2)", "(reserved3)"
-	};
-
-	if (!cpu_has_feature(CPU_FTR_L2CR))
-		return -EFAULT;
-
-	if ( /*!table->maxlen ||*/ (*ppos && !write)) {
-		*lenp = 0;
-		return 0;
-	}
-
-	vleft = table->maxlen / sizeof(int);
-	left = *lenp;
-
-	for (; left /*&& vleft--*/; first=0) {
-		if (write) {
-			while (left) {
-				char c;
-				if(get_user(c, buffer))
-					return -EFAULT;
-				if (!isspace(c))
-					break;
-				left--;
-				buffer++;
-			}
-			if (!left)
-				break;
-			len = left;
-			if (len > TMPBUFLEN-1)
-				len = TMPBUFLEN-1;
-			if(copy_from_user(buf, buffer, len))
-				return -EFAULT;
-			buf[len] = 0;
-			p = buf;
-			if (*p < '0' || *p > '9')
-				break;
-			val = simple_strtoul(p, &p, 0);
-			len = p-buf;
-			if ((len < left) && *p && !isspace(*p))
-				break;
-			buffer += len;
-			left -= len;
-			_set_L2CR(val);
-		} else {
-			p = buf;
-			if (!first)
-				*p++ = '\t';
-			val = _get_L2CR();
-			p += sprintf(p, "0x%08x: ", val);
-			p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
-				     	"disabled");
-			p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
-			p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
-			p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
-			p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
-			p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
-			p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
-			p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
-					"copy-back");
-			p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
-			p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
-			p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
-			p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
-			p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
-
-			p += sprintf(p,"\n");
-
-			len = strlen(buf);
-			if (len > left)
-				len = left;
-			if (copy_to_user(buffer, buf, len))
-				return -EFAULT;
-			left -= len;
-			buffer += len;
-			break;
-		}
-	}
-
-	if (!write && !first && left) {
-		if(put_user('\n', (char __user *) buffer))
-			return -EFAULT;
-		left--, buffer++;
-	}
-	if (write) {
-		char __user *s = (char __user *) buffer;
-		while (left) {
-			char c;
-			if(get_user(c, s++))
-				return -EFAULT;
-			if (!isspace(c))
-				break;
-			left--;
-		}
-	}
-	if (write && first)
-		return -EINVAL;
-	*lenp -= left;
-	*ppos += *lenp;
-	return 0;
-}
-
-#ifdef CONFIG_SYSCTL
-/*
- * Register our sysctl.
- */
-static ctl_table htab_ctl_table[]={
-	{
-		.procname	= "l2cr",
-		.mode		= 0644,
-		.proc_handler	= &proc_dol2crvec,
-	},
-	{}
-};
-static ctl_table htab_sysctl_root[] = {
-	{
-		.ctl_name	= CTL_KERN,
-		.procname	= "kernel",
-		.mode		= 0555,
-		.child		= htab_ctl_table,
-	},
-	{}
-};
-
-static int __init
-register_ppc_htab_sysctl(void)
-{
-	register_sysctl_table(htab_sysctl_root);
-
-	return 0;
-}
-
-__initcall(register_ppc_htab_sysctl);
-#endif
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
deleted file mode 100644
index 5d529bcbeee9..000000000000
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ /dev/null
@@ -1,258 +0,0 @@
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/elfcore.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <linux/vt_kern.h>
-#include <linux/nvram.h>
-#include <linux/console.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/ide.h>
-#include <asm/atomic.h>
-#include <asm/checksum.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/nvram.h>
-#include <asm/mmu_context.h>
-#include <asm/backlight.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/btext.h>
-#include <asm/xmon.h>
-#include <asm/signal.h>
-#include <asm/dcr.h>
-
-#ifdef  CONFIG_8xx
-#include <asm/cpm1.h>
-#endif
-
-extern void transfer_to_handler(void);
-extern void do_IRQ(struct pt_regs *regs);
-extern void machine_check_exception(struct pt_regs *regs);
-extern void alignment_exception(struct pt_regs *regs);
-extern void program_check_exception(struct pt_regs *regs);
-extern void single_step_exception(struct pt_regs *regs);
-extern int sys_sigreturn(struct pt_regs *regs);
-
-long long __ashrdi3(long long, int);
-long long __ashldi3(long long, int);
-long long __lshrdi3(long long, int);
-
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(clear_user_page);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(transfer_to_handler);
-EXPORT_SYMBOL(do_IRQ);
-EXPORT_SYMBOL(machine_check_exception);
-EXPORT_SYMBOL(alignment_exception);
-EXPORT_SYMBOL(program_check_exception);
-EXPORT_SYMBOL(single_step_exception);
-EXPORT_SYMBOL(sys_sigreturn);
-EXPORT_SYMBOL(ppc_n_lost_interrupts);
-
-EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
-EXPORT_SYMBOL(DMA_MODE_READ);
-EXPORT_SYMBOL(DMA_MODE_WRITE);
-
-#if !defined(__INLINE_BITOPS)
-EXPORT_SYMBOL(set_bit);
-EXPORT_SYMBOL(clear_bit);
-EXPORT_SYMBOL(change_bit);
-EXPORT_SYMBOL(test_and_set_bit);
-EXPORT_SYMBOL(test_and_clear_bit);
-EXPORT_SYMBOL(test_and_change_bit);
-#endif /* __INLINE_BITOPS */
-
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
-
-EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/*
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(outb);
-EXPORT_SYMBOL(outw);
-EXPORT_SYMBOL(outl);
-EXPORT_SYMBOL(outsl);*/
-
-EXPORT_SYMBOL(_insb);
-EXPORT_SYMBOL(_outsb);
-EXPORT_SYMBOL(_insw_ns);
-EXPORT_SYMBOL(_outsw_ns);
-EXPORT_SYMBOL(_insl_ns);
-EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(iopa);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(isa_io_base);
-EXPORT_SYMBOL(isa_mem_base);
-EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-EXPORT_SYMBOL(pci_bus_io_base);
-EXPORT_SYMBOL(pci_bus_io_base_phys);
-EXPORT_SYMBOL(pci_bus_mem_base_phys);
-EXPORT_SYMBOL(pci_bus_to_hose);
-EXPORT_SYMBOL(pci_resource_to_bus);
-EXPORT_SYMBOL(pci_phys_to_bus);
-EXPORT_SYMBOL(pci_bus_to_phys);
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-extern void flush_dcache_all(void);
-EXPORT_SYMBOL(flush_dcache_all);
-#endif
-
-EXPORT_SYMBOL(start_thread);
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(__flush_icache_range);
-EXPORT_SYMBOL(flush_dcache_range);
-EXPORT_SYMBOL(flush_icache_user_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(flush_tlb_kernel_range);
-EXPORT_SYMBOL(flush_tlb_page);
-EXPORT_SYMBOL(_tlbie);
-#ifdef CONFIG_ALTIVEC
-#ifndef CONFIG_SMP
-EXPORT_SYMBOL(last_task_used_altivec);
-#endif
-EXPORT_SYMBOL(giveup_altivec);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
-EXPORT_SYMBOL(smp_hw_index);
-#endif
-
-EXPORT_SYMBOL(ppc_md);
-
-#ifdef CONFIG_ADB
-EXPORT_SYMBOL(adb_request);
-EXPORT_SYMBOL(adb_register);
-EXPORT_SYMBOL(adb_unregister);
-EXPORT_SYMBOL(adb_poll);
-EXPORT_SYMBOL(adb_try_handler_change);
-#endif /* CONFIG_ADB */
-#ifdef CONFIG_ADB_CUDA
-EXPORT_SYMBOL(cuda_request);
-EXPORT_SYMBOL(cuda_poll);
-#endif /* CONFIG_ADB_CUDA */
-#if defined(CONFIG_BOOTX_TEXT)
-EXPORT_SYMBOL(btext_update_display);
-#endif
-EXPORT_SYMBOL(to_tm);
-
-EXPORT_SYMBOL(pm_power_off);
-
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(cacheable_memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memchr);
-
-#if defined(CONFIG_FB_VGA16_MODULE)
-EXPORT_SYMBOL(screen_info);
-#endif
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
-EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
-#ifdef CONFIG_XMON
-EXPORT_SYMBOL(xmon);
-EXPORT_SYMBOL(xmon_printf);
-#endif
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
-extern void (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-EXPORT_SYMBOL(debugger);
-EXPORT_SYMBOL(debugger_bpt);
-EXPORT_SYMBOL(debugger_sstep);
-EXPORT_SYMBOL(debugger_iabr_match);
-EXPORT_SYMBOL(debugger_dabr_match);
-EXPORT_SYMBOL(debugger_fault_handler);
-#endif
-
-#ifdef  CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx) || defined(CONFIG_40x)
-EXPORT_SYMBOL(__res);
-#endif
-
-EXPORT_SYMBOL(next_mmu_context);
-EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
-#ifdef CONFIG_PPC_STD_MMU
-extern long mol_trampoline;
-EXPORT_SYMBOL(mol_trampoline); /* For MOL */
-EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
-#ifdef CONFIG_SMP
-extern int mmu_hash_lock;
-EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
-#endif /* CONFIG_SMP */
-extern long *intercept_table;
-EXPORT_SYMBOL(intercept_table);
-#endif /* CONFIG_PPC_STD_MMU */
-#ifdef CONFIG_PPC_DCR_NATIVE
-EXPORT_SYMBOL(__mtdcr);
-EXPORT_SYMBOL(__mfdcr);
-#endif
diff --git a/arch/ppc/kernel/relocate_kernel.S b/arch/ppc/kernel/relocate_kernel.S
deleted file mode 100644
index 9b2ad48e988c..000000000000
--- a/arch/ppc/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * relocate_kernel.S - put the kernel image in place to boot
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <asm/reg.h>
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#include <asm/kexec.h>
-
-#define PAGE_SIZE      4096 /* must be same value as in <asm/page.h> */
-
-	/*
-	 * Must be relocatable PIC code callable as a C function.
-	 */
-	.globl relocate_new_kernel
-relocate_new_kernel:
-	/* r3 = page_list   */
-	/* r4 = reboot_code_buffer */
-	/* r5 = start_address      */
-
-	li	r0, 0
-
-	/*
-	 * Set Machine Status Register to a known status,
-	 * switch the MMU off and jump to 1: in a single step.
-	 */
-
-	mr	r8, r0
-	ori     r8, r8, MSR_RI|MSR_ME
-	mtspr	SPRN_SRR1, r8
-	addi	r8, r4, 1f - relocate_new_kernel
-	mtspr	SPRN_SRR0, r8
-	sync
-	rfi
-
-1:
-	/* from this point address translation is turned off */
-	/* and interrupts are disabled */
-
-	/* set a new stack at the bottom of our page... */
-	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
-	stw	r0, 0(r1)
-
-	/* Do the copies */
-	li	r6, 0 /* checksum */
-	mr	r0, r3
-	b	1f
-
-0:	/* top, read another word for the indirection page */
-	lwzu	r0, 4(r3)
-
-1:
-	/* is it a destination page? (r8) */
-	rlwinm.	r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */
-	beq	2f
-
-	rlwinm	r8, r0, 0, 0, 19 /* clear kexec flags, page align */
-	b	0b
-
-2:	/* is it an indirection page? (r3) */
-	rlwinm.	r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */
-	beq	2f
-
-	rlwinm	r3, r0, 0, 0, 19 /* clear kexec flags, page align */
-	subi	r3, r3, 4
-	b	0b
-
-2:	/* are we done? */
-	rlwinm.	r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */
-	beq	2f
-	b	3f
-
-2:	/* is it a source page? (r9) */
-	rlwinm.	r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */
-	beq	0b
-
-	rlwinm	r9, r0, 0, 0, 19 /* clear kexec flags, page align */
-
-	li	r7, PAGE_SIZE / 4
-	mtctr   r7
-	subi    r9, r9, 4
-	subi    r8, r8, 4
-9:
-	lwzu    r0, 4(r9)  /* do the copy */
-	xor	r6, r6, r0
-	stwu    r0, 4(r8)
-	dcbst	0, r8
-	sync
-	icbi	0, r8
-	bdnz    9b
-
-	addi    r9, r9, 4
-	addi    r8, r8, 4
-	b	0b
-
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * execute a serializing instruction here.
-	 */
-	isync
-	sync
-
-	/* jump to the entry point, usually the setup routine */
-	mtlr	r5
-	blrl
-
-1:	b	1b
-
-relocate_new_kernel_end:
-
-	.globl relocate_new_kernel_size
-relocate_new_kernel_size:
-	.long relocate_new_kernel_end - relocate_new_kernel
-
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
deleted file mode 100644
index 51e8094f52d6..000000000000
--- a/arch/ppc/kernel/setup.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Common prep boot and setup code.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/screen_info.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/console.h>
-
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/smp.h>
-#include <asm/elf.h>
-#include <asm/cputable.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sections.h>
-#include <asm/nvram.h>
-#include <asm/xmon.h>
-#include <asm/ocp.h>
-#include <asm/irq.h>
-
-#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
-		      defined(CONFIG_PPC_MPC52xx))
-
-#if USES_PPC_SYS
-#include <asm/ppc_sys.h>
-#endif
-
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
-extern void platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-extern void reloc_got2(unsigned long offset);
-
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
-extern boot_infos_t *boot_infos;
-
-/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
-   size value reported by the boot loader. */
-unsigned long boot_mem_size;
-
-unsigned long ISA_DMA_THRESHOLD;
-unsigned int DMA_MODE_READ;
-unsigned int DMA_MODE_WRITE;
-
-#ifdef CONFIG_PPC_PREP
-extern void prep_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-
-dev_t boot_dev;
-#endif /* CONFIG_PPC_PREP */
-
-int have_of;
-EXPORT_SYMBOL(have_of);
-
-#ifdef __DO_IRQ_CANON
-int ppc_do_canonicalize_irqs;
-EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
-#endif
-
-#ifdef CONFIG_VGA_CONSOLE
-unsigned long vgacon_remap_base;
-#endif
-
-struct machdep_calls ppc_md;
-
-/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
-    defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
-struct screen_info screen_info = {
-	0, 25,			/* orig-x, orig-y */
-	0,			/* unused */
-	0,			/* orig-video-page */
-	0,			/* orig-video-mode */
-	80,			/* orig-video-cols */
-	0,0,0,			/* ega_ax, ega_bx, ega_cx */
-	25,			/* orig-video-lines */
-	1,			/* orig-video-isVGA */
-	16			/* orig-video-points */
-};
-#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
-
-void machine_restart(char *cmd)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.restart(cmd);
-}
-
-static void ppc_generic_power_off(void)
-{
-	ppc_md.power_off();
-}
-
-void machine_halt(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.halt();
-}
-
-void (*pm_power_off)(void) = ppc_generic_power_off;
-
-void machine_power_off(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	if (pm_power_off)
-		pm_power_off();
-	ppc_generic_power_off();
-}
-
-#ifdef CONFIG_TAU
-extern u32 cpu_temp(unsigned long cpu);
-extern u32 cpu_temp_both(unsigned long cpu);
-#endif /* CONFIG_TAU */
-
-int show_cpuinfo(struct seq_file *m, void *v)
-{
-	int i = (int) v - 1;
-	int err = 0;
-	unsigned int pvr;
-	unsigned short maj, min;
-	unsigned long lpj;
-
-	if (i >= NR_CPUS) {
-		/* Show summary information */
-#ifdef CONFIG_SMP
-		unsigned long bogosum = 0;
-		for_each_online_cpu(i)
-			bogosum += cpu_data[i].loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
-#endif /* CONFIG_SMP */
-
-		if (ppc_md.show_cpuinfo != NULL)
-			err = ppc_md.show_cpuinfo(m);
-		return err;
-	}
-
-#ifdef CONFIG_SMP
-	if (!cpu_online(i))
-		return 0;
-	pvr = cpu_data[i].pvr;
-	lpj = cpu_data[i].loops_per_jiffy;
-#else
-	pvr = mfspr(SPRN_PVR);
-	lpj = loops_per_jiffy;
-#endif
-
-	seq_printf(m, "processor\t: %d\n", i);
-	seq_printf(m, "cpu\t\t: ");
-
-	if (cur_cpu_spec->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-	else
-		seq_printf(m, "unknown (%08x)", pvr);
-#ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
-		seq_printf(m, ", altivec supported");
-#endif
-	seq_printf(m, "\n");
-
-#ifdef CONFIG_TAU
-	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
-#ifdef CONFIG_TAU_AVERAGE
-		/* more straightforward, but potentially misleading */
-		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
-			   cpu_temp(i));
-#else
-		/* show the actual temp sensor range */
-		u32 temp;
-		temp = cpu_temp_both(i);
-		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
-			   temp & 0xff, temp >> 16);
-#endif
-	}
-#endif /* CONFIG_TAU */
-
-	if (ppc_md.show_percpuinfo != NULL) {
-		err = ppc_md.show_percpuinfo(m, i);
-		if (err)
-			return err;
-	}
-
-	/* If we are a Freescale core do a simple check so
-	 * we dont have to keep adding cases in the future */
-	if ((PVR_VER(pvr) & 0x8000) == 0x8000) {
-		maj = PVR_MAJ(pvr);
-		min = PVR_MIN(pvr);
-	} else {
-		switch (PVR_VER(pvr)) {
-			case 0x0020:	/* 403 family */
-				maj = PVR_MAJ(pvr) + 1;
-				min = PVR_MIN(pvr);
-				break;
-			case 0x1008:	/* 740P/750P ?? */
-				maj = ((pvr >> 8) & 0xFF) - 1;
-				min = pvr & 0xFF;
-				break;
-			default:
-				maj = (pvr >> 8) & 0xFF;
-				min = pvr & 0xFF;
-				break;
-		}
-	}
-
-	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
-		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-
-#if USES_PPC_SYS
-	if (cur_ppc_sys_spec->ppc_sys_name)
-		seq_printf(m, "chipset\t\t: %s\n",
-			cur_ppc_sys_spec->ppc_sys_name);
-#endif
-
-#ifdef CONFIG_SMP
-	seq_printf(m, "\n");
-#endif
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	int i = *pos;
-
-	return i <= NR_CPUS? (void *) (i + 1): NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
-
-/*
- * We're called here very early in the boot.  We determine the machine
- * type and call the appropriate low-level setup functions.
- *  -- Cort <cort@fsmlabs.com>
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings).  -- paulus
- */
-__init
-unsigned long
-early_init(int r3, int r4, int r5)
-{
- 	unsigned long phys;
-	unsigned long offset = reloc_offset();
-	struct cpu_spec *spec;
-
- 	/* Default */
- 	phys = offset + KERNELBASE;
-
-	/* First zero the BSS -- use memset, some arches don't have
-	 * caches on yet */
-	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
-
-	/*
-	 * Identify the CPU type and fix up code sections
-	 * that depend on which cpu we have.
-	 */
-#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU)
-	/* We pass the virtual PVR here for 440EP as 440EP and 440GR have
-	 * identical PVRs and there is no reliable way to check for the FPU
-	 */
-	spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8));
-#else
-	spec = identify_cpu(offset, mfspr(SPRN_PVR));
-#endif
-	do_feature_fixups(spec->cpu_features,
-			  PTRRELOC(&__start___ftr_fixup),
-			  PTRRELOC(&__stop___ftr_fixup));
-
-	return phys;
-}
-
-#ifdef CONFIG_PPC_PREP
-/*
- * The PPC_PREP version of platform_init...
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	if (boot_text_mapped) {
-		btext_clearscreen();
-		btext_welcome();
-	}
-#endif
-
-	parse_bootinfo(find_bootinfo());
-
-	prep_init(r3, r4, r5, r6, r7);
-}
-#endif /* CONFIG_PPC_PREP */
-
-struct bi_record *find_bootinfo(void)
-{
-	struct bi_record *rec;
-
-	rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20));
-	if ( rec->tag != BI_FIRST ) {
-		/*
-		 * This 0x10000 offset is a terrible hack but it will go away when
-		 * we have the bootloader handle all the relocation and
-		 * prom calls -- Cort
-		 */
-		rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20));
-		if ( rec->tag != BI_FIRST )
-			return NULL;
-	}
-	return rec;
-}
-
-void parse_bootinfo(struct bi_record *rec)
-{
-	if (rec == NULL || rec->tag != BI_FIRST)
-		return;
-	while (rec->tag != BI_LAST) {
-		ulong *data = rec->data;
-		switch (rec->tag) {
-		case BI_CMD_LINE:
-			strlcpy(cmd_line, (void *)data, sizeof(cmd_line));
-			break;
-#ifdef CONFIG_BLK_DEV_INITRD
-		case BI_INITRD:
-			initrd_start = data[0] + KERNELBASE;
-			initrd_end = data[0] + data[1] + KERNELBASE;
-			break;
-#endif /* CONFIG_BLK_DEV_INITRD */
-		case BI_MEMSIZE:
-			boot_mem_size = data[0];
-			break;
-		}
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-	}
-}
-
-/*
- * Find out what kind of machine we're on and save any data we need
- * from the early boot process (devtree is copied on pmac by prom_init()).
- * This is called very early on the boot process, after a minimal
- * MMU environment has been set up but before MMU_init is called.
- */
-void __init
-machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	     unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_CMDLINE
-	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
-#endif /* CONFIG_CMDLINE */
-
-#ifdef CONFIG_6xx
-	ppc_md.power_save = ppc6xx_idle;
-#endif
-
-	platform_init(r3, r4, r5, r6, r7);
-
-	if (ppc_md.progress)
-		ppc_md.progress("id mach(): done", 0x200);
-}
-#ifdef CONFIG_BOOKE_WDT
-/* Checks wdt=x and wdt_period=xx command-line option */
-int __init early_parse_wdt(char *p)
-{
-	if (p && strncmp(p, "0", 1) != 0)
-	       booke_wdt_enabled = 1;
-
-	return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
-	if (p)
-		booke_wdt_period = simple_strtoul(p, NULL, 0);
-
-	return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif	/* CONFIG_BOOKE_WDT */
-
-/* Checks "l2cr=xxxx" command-line option */
-int __init ppc_setup_l2cr(char *str)
-{
-	if (cpu_has_feature(CPU_FTR_L2CR)) {
-		unsigned long val = simple_strtoul(str, NULL, 0);
-		printk(KERN_INFO "l2cr set to %lx\n", val);
-		_set_L2CR(0);		/* force invalidate by disable cache */
-		_set_L2CR(val);		/* and enable it */
-	}
-	return 1;
-}
-__setup("l2cr=", ppc_setup_l2cr);
-
-#ifdef CONFIG_GENERIC_NVRAM
-
-/* Generic nvram hooks used by drivers/char/gen_nvram.c */
-unsigned char nvram_read_byte(int addr)
-{
-	if (ppc_md.nvram_read_val)
-		return ppc_md.nvram_read_val(addr);
-	return 0xff;
-}
-EXPORT_SYMBOL(nvram_read_byte);
-
-void nvram_write_byte(unsigned char val, int addr)
-{
-	if (ppc_md.nvram_write_val)
-		ppc_md.nvram_write_val(addr, val);
-}
-EXPORT_SYMBOL(nvram_write_byte);
-
-void nvram_sync(void)
-{
-	if (ppc_md.nvram_sync)
-		ppc_md.nvram_sync();
-}
-EXPORT_SYMBOL(nvram_sync);
-
-#endif /* CONFIG_NVRAM */
-
-static struct cpu cpu_devices[NR_CPUS];
-
-int __init ppc_init(void)
-{
-	int i;
-
-	/* clear the progress line */
-	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
-
-	/* register CPU devices */
-	for_each_possible_cpu(i)
-		register_cpu(&cpu_devices[i], i);
-
-	/* call platform init */
-	if (ppc_md.init != NULL) {
-		ppc_md.init();
-	}
-	return 0;
-}
-
-arch_initcall(ppc_init);
-
-/* Warning, IO base is not yet inited */
-void __init setup_arch(char **cmdline_p)
-{
-	extern char *klimit;
-	extern void do_init_bootmem(void);
-
-	/* so udelay does something sensible, assume <= 1000 bogomips */
-	loops_per_jiffy = 500000000 / HZ;
-
-	if (ppc_md.init_early)
-		ppc_md.init_early();
-
-#ifdef CONFIG_XMON
-	xmon_init(1);
-	if (strstr(cmd_line, "xmon"))
-		xmon(NULL);
-#endif /* CONFIG_XMON */
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
-
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
-	/*
-	 * Set cache line size based on type of cpu as a default.
-	 * Systems with OF can look in the properties on the cpu node(s)
-	 * for a possibly more accurate value.
-	 */
-	if (! cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE)) {
-		dcache_bsize = cur_cpu_spec->dcache_bsize;
-		icache_bsize = cur_cpu_spec->icache_bsize;
-		ucache_bsize = 0;
-	} else
-		ucache_bsize = dcache_bsize = icache_bsize
-			= cur_cpu_spec->dcache_bsize;
-
-	/* reboot on panic */
-	panic_timeout = 180;
-
-	init_mm.start_code = PAGE_OFFSET;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) klimit;
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	/* set up the bootmem stuff with available memory */
-	do_init_bootmem();
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-
-#ifdef CONFIG_PPC_OCP
-	/* Initialize OCP device list */
-	ocp_early_init();
-	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	ppc_md.setup_arch();
-	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
-
-	paging_init();
-}
diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c
deleted file mode 100644
index d0cf3f86931d..000000000000
--- a/arch/ppc/kernel/smp-tbsync.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Smp timebase synchronization for ppc.
- *
- * Copyright (C) 2003 Samuel Rydh (samuel@ibrium.se)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/unistd.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-
-#define NUM_ITER		300
-
-enum {
-	kExit=0, kSetAndTest, kTest
-};
-
-static struct {
-	volatile int		tbu;
-	volatile int		tbl;
-	volatile int		mark;
-	volatile int		cmd;
-	volatile int		handshake;
-	int			filler[3];
-
-	volatile int		ack;
-	int			filler2[7];
-
-	volatile int		race_result;
-} *tbsync;
-
-static volatile int		running;
-
-static void __devinit
-enter_contest( int mark, int add )
-{
-	while( (int)(get_tbl() - mark) < 0 )
-		tbsync->race_result = add;
-}
-
-void __devinit
-smp_generic_take_timebase( void )
-{
-	int cmd, tbl, tbu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	while( !running )
-		;
-	rmb();
-
-	for( ;; ) {
-		tbsync->ack = 1;
-		while( !tbsync->handshake )
-			;
-		rmb();
-
-		cmd = tbsync->cmd;
-		tbl = tbsync->tbl;
-		tbu = tbsync->tbu;
-		tbsync->ack = 0;
-		if( cmd == kExit )
-			break;
-
-		if( cmd == kSetAndTest ) {
-			while( tbsync->handshake )
-				;
-			asm volatile ("mttbl %0" :: "r" (tbl) );
-			asm volatile ("mttbu %0" :: "r" (tbu) );
-		} else {
-			while( tbsync->handshake )
-				;
-		}
-		enter_contest( tbsync->mark, -1 );
-	}
-	local_irq_restore(flags);
-}
-
-static int __devinit
-start_contest( int cmd, int offset, int num )
-{
-	int i, tbu, tbl, mark, score=0;
-
-	tbsync->cmd = cmd;
-
-	local_irq_disable();
-	for( i=-3; i<num; ) {
-		tbl = get_tbl() + 400;
-		tbsync->tbu = tbu = get_tbu();
-		tbsync->tbl = tbl + offset;
-		tbsync->mark = mark = tbl + 400;
-
-		wmb();
-
-		tbsync->handshake = 1;
-		while( tbsync->ack )
-			;
-
-		while( (int)(get_tbl() - tbl) <= 0 )
-			;
-		tbsync->handshake = 0;
-		enter_contest( mark, 1 );
-
-		while( !tbsync->ack )
-			;
-
-		if( tbsync->tbu != get_tbu() || ((tbsync->tbl ^ get_tbl()) & 0x80000000) )
-			continue;
-		if( i++ > 0 )
-			score += tbsync->race_result;
-	}
-	local_irq_enable();
-	return score;
-}
-
-void __devinit
-smp_generic_give_timebase( void )
-{
-	int i, score, score2, old, min=0, max=5000, offset=1000;
-
-	printk("Synchronizing timebase\n");
-
-	/* if this fails then this kernel won't work anyway... */
-	tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL );
-	mb();
-	running = 1;
-
-	while( !tbsync->ack )
-		;
-
-	/* binary search */
-	for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
-		score = start_contest( kSetAndTest, offset, NUM_ITER );
-
-		printk("score %d, offset %d\n", score, offset );
-
-		if( score > 0 )
-			max = offset;
-		else
-			min = offset;
-		old = offset;
-	}
-	score = start_contest( kSetAndTest, min, NUM_ITER );
-	score2 = start_contest( kSetAndTest, max, NUM_ITER );
-
-	printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
-	score = abs( score );
-	score2 = abs( score2 );
-	offset = (score < score2) ? min : max;
-
-	/* guard against inaccurate mttb */
-	for( i=0; i<10; i++ ) {
-		start_contest( kSetAndTest, offset, NUM_ITER/10 );
-
-		if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
-			score2 = -score2;
-		if( score2 <= score || score2 < 20 )
-			break;
-	}
-	printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
-
-	/* exiting */
-	tbsync->cmd = kExit;
-	wmb();
-	tbsync->handshake = 1;
-	while( tbsync->ack )
-		;
-	tbsync->handshake = 0;
-	kfree( tbsync );
-	tbsync = NULL;
-	running = 0;
-
-	/* all done */
-	smp_tb_synchronized = 1;
-}
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
deleted file mode 100644
index bcab0d210e30..000000000000
--- a/arch/ppc/kernel/smp.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Smp support for ppc.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/thread_info.h>
-#include <asm/tlbflush.h>
-#include <asm/xmon.h>
-#include <asm/machdep.h>
-
-volatile int smp_commenced;
-int smp_tb_synchronized;
-struct cpuinfo_PPC cpu_data[NR_CPUS];
-atomic_t ipi_recv;
-atomic_t ipi_sent;
-cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-static struct task_struct *idle_tasks[NR_CPUS];
-
-EXPORT_SYMBOL(cpu_online_map);
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* SMP operations for this machine */
-struct smp_ops_t *smp_ops;
-
-/* all cpu mappings are 1-1 -- Cort */
-volatile unsigned long cpu_callin_map[NR_CPUS];
-
-int start_secondary(void *);
-void smp_call_function_interrupt(void);
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target);
-
-/* Low level assembly function used to backup CPU 0 state */
-extern void __save_cpu_setup(void);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION	0
-#define PPC_MSG_RESCHEDULE	1
-#define PPC_MSG_INVALIDATE_TLB	2
-#define PPC_MSG_XMON_BREAK	3
-
-static inline void
-smp_message_pass(int target, int msg)
-{
-	if (smp_ops) {
-		atomic_inc(&ipi_sent);
-		smp_ops->message_pass(target, msg);
-	}
-}
-
-/*
- * Common functions
- */
-void smp_message_recv(int msg)
-{
-	atomic_inc(&ipi_recv);
-
-	switch( msg ) {
-	case PPC_MSG_CALL_FUNCTION:
-		smp_call_function_interrupt();
-		break;
-	case PPC_MSG_RESCHEDULE:
-		set_need_resched();
-		break;
-	case PPC_MSG_INVALIDATE_TLB:
-		_tlbia();
-		break;
-#ifdef CONFIG_XMON
-	case PPC_MSG_XMON_BREAK:
-		xmon(get_irq_regs());
-		break;
-#endif /* CONFIG_XMON */
-	default:
-		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
-		       smp_processor_id(), msg);
-		break;
-	}
-}
-
-/*
- * 750's don't broadcast tlb invalidates so
- * we have to emulate that behavior.
- *   -- Cort
- */
-void smp_send_tlb_invalidate(int cpu)
-{
-	if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
-		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB);
-}
-
-void smp_send_reschedule(int cpu)
-{
-	/*
-	 * This is only used if `cpu' is running an idle task,
-	 * so it will reschedule itself anyway...
-	 *
-	 * This isn't the case anymore since the other CPU could be
-	 * sleeping and won't reschedule until the next interrupt (such
-	 * as the timer).
-	 *  -- Cort
-	 */
-	/* This is only used if `cpu' is running an idle task,
-	   so it will reschedule itself anyway... */
-	smp_message_pass(cpu, PPC_MSG_RESCHEDULE);
-}
-
-#ifdef CONFIG_XMON
-void smp_send_xmon_break(int cpu)
-{
-	smp_message_pass(cpu, PPC_MSG_XMON_BREAK);
-}
-#endif /* CONFIG_XMON */
-
-static void stop_this_cpu(void *dummy)
-{
-	local_irq_disable();
-	while (1)
-		;
-}
-
-void smp_send_stop(void)
-{
-	smp_call_function(stop_this_cpu, NULL, 0);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} *call_data;
-
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-/*
- * [SUMMARY] Run a function on all other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-{
-	/* FIXME: get cpu lock with hotplug cpus, or change this to
-           bitmask. --RR */
-	if (num_online_cpus() <= 1)
-		return 0;
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-	return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
-}
-
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target)
-{
-	struct call_data_struct data;
-	int ret = -1;
-	int timeout;
-	int ncpus = 1;
-
-	if (target == MSG_ALL_BUT_SELF)
-		ncpus = num_online_cpus() - 1;
-	else if (target == MSG_ALL)
-		ncpus = num_online_cpus();
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	/* Send a message to all other CPUs and wait for them to respond */
-	smp_message_pass(target, PPC_MSG_CALL_FUNCTION);
-
-	/* Wait for response */
-	timeout = 1000000;
-	while (atomic_read(&data.started) != ncpus) {
-		if (--timeout == 0) {
-			printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
-			       smp_processor_id(), atomic_read(&data.started));
-			goto out;
-		}
-		barrier();
-		udelay(1);
-	}
-
-	if (wait) {
-		timeout = 1000000;
-		while (atomic_read(&data.finished) != ncpus) {
-			if (--timeout == 0) {
-				printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
-				       smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
-				goto out;
-			}
-			barrier();
-			udelay(1);
-		}
-	}
-	ret = 0;
-
- out:
-	spin_unlock(&call_lock);
-	return ret;
-}
-
-void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	(*func)(info);
-	if (wait)
-		atomic_inc(&call_data->finished);
-}
-
-static void __devinit smp_store_cpu_info(int id)
-{
-        struct cpuinfo_PPC *c = &cpu_data[id];
-
-	/* assume bogomips are same for everything */
-        c->loops_per_jiffy = loops_per_jiffy;
-        c->pvr = mfspr(SPRN_PVR);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	int num_cpus, i, cpu;
-	struct task_struct *p;
-
-	/* Fixup boot cpu */
-        smp_store_cpu_info(smp_processor_id());
-	cpu_callin_map[smp_processor_id()] = 1;
-
-	if (smp_ops == NULL) {
-		printk("SMP not supported on this machine.\n");
-		return;
-	}
-
-	/* Probe platform for CPUs: always linear. */
-	num_cpus = smp_ops->probe();
-	
-	if (num_cpus < 2)
-		smp_tb_synchronized = 1;
-	
-	for (i = 0; i < num_cpus; ++i)
-		cpu_set(i, cpu_possible_map);
-
-	/* Backup CPU 0 state */
-	__save_cpu_setup();
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == smp_processor_id())
-			continue;
-		/* create a process for the processor */
-		p = fork_idle(cpu);
-		if (IS_ERR(p))
-			panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-		task_thread_info(p)->cpu = cpu;
-		idle_tasks[cpu] = p;
-	}
-}
-
-void __devinit smp_prepare_boot_cpu(void)
-{
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), cpu_possible_map);
-}
-
-int __init setup_profiling_timer(unsigned int multiplier)
-{
-	return 0;
-}
-
-/* Processor coming up starts here */
-int __devinit start_secondary(void *unused)
-{
-	int cpu;
-
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-
-	cpu = smp_processor_id();
-        smp_store_cpu_info(cpu);
-	set_dec(tb_ticks_per_jiffy);
-	preempt_disable();
-	cpu_callin_map[cpu] = 1;
-
-	printk("CPU %d done callin...\n", cpu);
-	smp_ops->setup_cpu(cpu);
-	printk("CPU %d done setup...\n", cpu);
-	smp_ops->take_timebase();
-	printk("CPU %d done timebase take...\n", cpu);
-
-	spin_lock(&call_lock);
-	cpu_set(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
-	local_irq_enable();
-
-	cpu_idle();
-	return 0;
-}
-
-int __cpu_up(unsigned int cpu)
-{
-	char buf[32];
-	int c;
-
-	secondary_ti = task_thread_info(idle_tasks[cpu]);
-	mb();
-
-	/*
-	 * There was a cache flush loop here to flush the cache
-	 * to memory for the first 8MB of RAM.  The cache flush
-	 * has been pushed into the kick_cpu function for those
-	 * platforms that need it.
-	 */
-
-	/* wake up cpu */
-	smp_ops->kick_cpu(cpu);
-	
-	/*
-	 * wait to see if the cpu made a callin (is actually up).
-	 * use this value that I found through experimentation.
-	 * -- Cort
-	 */
-	for (c = 1000; c && !cpu_callin_map[cpu]; c--)
-		udelay(100);
-
-	if (!cpu_callin_map[cpu]) {
-		sprintf(buf, "didn't find cpu %u", cpu);
-		if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu);
-		printk("Processor %u is stuck.\n", cpu);
-		return -ENOENT;
-	}
-
-	sprintf(buf, "found cpu %u", cpu);
-	if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu);
-	printk("Processor %d found.\n", cpu);
-
-	smp_ops->give_timebase();
-
-	/* Wait until cpu puts itself in the online map */
-	while (!cpu_online(cpu))
-		cpu_relax();
-
-	return 0;
-}
-
-void smp_cpus_done(unsigned int max_cpus)
-{
-	smp_ops->setup_cpu(0);
-}
diff --git a/arch/ppc/kernel/softemu8xx.c b/arch/ppc/kernel/softemu8xx.c
deleted file mode 100644
index 9bbb6bf7b645..000000000000
--- a/arch/ppc/kernel/softemu8xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Software emulation of some PPC instructions for the 8xx core.
- *
- * Copyright (C) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Software floating emuation for the MPC8xx processor.  I did this mostly
- * because it was easier than trying to get the libraries compiled for
- * software floating point.  The goal is still to get the libraries done,
- * but I lost patience and needed some hacks to at least get init and
- * shells running.  The first problem is the setjmp/longjmp that save
- * and restore the floating point registers.
- *
- * For this emulation, our working registers are found on the register
- * save area.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-extern void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr);
-extern int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr);
-
-/* Eventually we may need a look-up table, but this works for now.
-*/
-#define LFS	48
-#define LFD	50
-#define LFDU	51
-#define STFD	54
-#define STFDU	55
-#define FMR	63
-
-/*
- * We return 0 on success, 1 on unimplemented instruction, and EFAULT
- * if a load/store faulted.
- */
-int
-Soft_emulate_8xx(struct pt_regs *regs)
-{
-	uint	inst, instword;
-	uint	flreg, idxreg, disp;
-	uint	retval;
-	signed short sdisp;
-	uint	*ea, *ip;
-
-	retval = 0;
-
-	instword = *((uint *)regs->nip);
-	inst = instword >> 26;
-
-	flreg = (instword >> 21) & 0x1f;
-	idxreg = (instword >> 16) & 0x1f;
-	disp = instword & 0xffff;
-
-	ea = (uint *)(regs->gpr[idxreg] + disp);
-	ip = (uint *)&current->thread.fpr[flreg];
-
-	switch ( inst )
-	{
-	case LFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		break;
-		
-	case LFDU:
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case LFS:
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(float)))
-			retval = -EFAULT;
-		break;
-	case STFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		break;
-
-	case STFDU:
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case FMR:
-		/* assume this is a fp move -- Cort */
-		memcpy( ip, &current->thread.fpr[(instword>>11)&0x1f],
-			sizeof(double) );
-		break;
-	default:
-		retval = 1;
-		printk("Bad emulation %s/%d\n"
-		       " NIP: %08lx instruction: %08x opcode: %x "
-		       "A: %x B: %x C: %x code: %x rc: %x\n",
-		       current->comm,current->pid,
-		       regs->nip,
-		       instword,inst,
-		       (instword>>16)&0x1f,
-		       (instword>>11)&0x1f,
-		       (instword>>6)&0x1f,
-		       (instword>>1)&0x3ff,
-		       instword&1);
-		{
-			int pa;
-			print_8xx_pte(current->mm,regs->nip);
-			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
-			pa |= (regs->nip & ~PAGE_MASK);
-			pa = (unsigned long)__va(pa);
-			printk("Kernel VA for NIP %x ", pa);
-			print_8xx_pte(current->mm,pa);
-		}
-		
-	}
-
-	if (retval == 0)
-		regs->nip += 4;
-	return(retval);
-}
-
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
deleted file mode 100644
index 18ee851e33e3..000000000000
--- a/arch/ppc/kernel/time.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Common time routines among all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
- *
- * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
- * to make clock more stable (2.4.0-test5). The only thing
- * that this code assumes is that the timebases have been synchronized
- * by firmware on SMP and are never stopped (never do sleep
- * on SMP then, nap and doze are OK).
- *
- * TODO (not necessarily in this file):
- * - improve precision and reproducibility of timebase frequency
- * measurement at boot time.
- * - get rid of xtime_lock for gettimeofday (generic kernel problem
- * to be implemented on all architectures for SMP scalability and
- * eventually implementing gettimeofday without entering the kernel).
- * - put all time/clock related variables in a single structure
- * to minimize number of cache lines touched by gettimeofday()
- * - for astronomical applications: add a new function to get
- * non ambiguous timestamps even around leap seconds. This needs
- * a new timestamp format and a good name.
- *
- *
- * The following comment is partially obsolete (at least the long wait
- * is no more a valid reason):
- * Since the MPC8xx has a programmable interrupt timer, I decided to
- * use that rather than the decrementer.  Two reasons: 1.) the clock
- * frequency is low, causing 2.) a long wait in the timer interrupt
- *		while ((d = get_dec()) == dval)
- * loop.  The MPC8xx can be driven from a variety of input clocks,
- * so a number of assumptions have been made here because the kernel
- * parameter HZ is a constant.  We assume (correctly, today :-) that
- * the MPC8xx on the MBX board is driven from a 32.768 kHz crystal.
- * This is then divided by 4, providing a 8192 Hz clock into the PIT.
- * Since it is not possible to get a nice 100 Hz clock out of this, without
- * creating a software PLL, I have set HZ to 128.  -- Dan
- *
- * 1997-09-10  Updated NTP code according to technical memorandum Jan '96
- *             "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/irq_regs.h>
-
-#include <asm/time.h>
-
-unsigned long disarm_decr[NR_CPUS];
-
-extern struct timezone sys_tz;
-
-/* keep track of when we need to update the rtc */
-time_t last_rtc_update;
-
-/* The decrementer counts down by 128 every 128ns on a 601. */
-#define DECREMENTER_COUNT_601	(1000000000 / HZ)
-
-unsigned tb_ticks_per_jiffy;
-unsigned tb_to_us;
-unsigned tb_last_stamp;
-unsigned long tb_to_ns_scale;
-
-/* used for timezone offset */
-static long timezone_offset;
-
-DEFINE_SPINLOCK(rtc_lock);
-
-EXPORT_SYMBOL(rtc_lock);
-
-/* Timer interrupt helper function */
-static inline int tb_delta(unsigned *jiffy_stamp) {
-	int delta;
-	if (__USE_RTC()) {
-		delta = get_rtcl();
-		if (delta < *jiffy_stamp) *jiffy_stamp -= 1000000000;
-		delta -= *jiffy_stamp;
-	} else {
-		delta = get_tbl() - *jiffy_stamp;
-	}
-	return delta;
-}
-
-#ifdef CONFIG_SMP
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	if (in_lock_functions(pc))
-		return regs->link;
-
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-#endif
-
-void wakeup_decrementer(void)
-{
-	set_dec(tb_ticks_per_jiffy);
-	/* No currently-supported powerbook has a 601,
-	 * so use get_tbl, not native
-	 */
-	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * We set it up to overflow again in 1/HZ seconds.
- */
-void timer_interrupt(struct pt_regs * regs)
-{
-	struct pt_regs *old_regs;
-	int next_dec;
-	unsigned long cpu = smp_processor_id();
-	unsigned jiffy_stamp = last_jiffy_stamp(cpu);
-	extern void do_IRQ(struct pt_regs *);
-
-	if (atomic_read(&ppc_n_lost_interrupts) != 0)
-		do_IRQ(regs);
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-
-	while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) {
-		jiffy_stamp += tb_ticks_per_jiffy;
-		
-		profile_tick(CPU_PROFILING);
-		update_process_times(user_mode(regs));
-
-	  	if (smp_processor_id())
-			continue;
-
-		/* We are in an interrupt, no need to save/restore flags */
-		write_seqlock(&xtime_lock);
-		tb_last_stamp = jiffy_stamp;
-		do_timer(1);
-
-		/*
-		 * update the rtc when needed, this should be performed on the
-		 * right fraction of a second. Half or full second ?
-		 * Full second works on mk48t59 clocks, others need testing.
-		 * Note that this update is basically only used through
-		 * the adjtimex system calls. Setting the HW clock in
-		 * any other way is a /dev/rtc and userland business.
-		 * This is still wrong by -0.5/+1.5 jiffies because of the
-		 * timer interrupt resolution and possible delay, but here we
-		 * hit a quantization limit which can only be solved by higher
-		 * resolution timers and decoupling time management from timer
-		 * interrupts. This is also wrong on the clocks
-		 * which require being written at the half second boundary.
-		 * We should have an rtc call that only sets the minutes and
-		 * seconds like on Intel to avoid problems with non UTC clocks.
-		 */
-		if ( ppc_md.set_rtc_time && ntp_synced() &&
-		     xtime.tv_sec - last_rtc_update >= 659 &&
-		     abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ) {
-		  	if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0)
-				last_rtc_update = xtime.tv_sec+1;
-			else
-				/* Try again one minute later */
-				last_rtc_update += 60;
-		}
-		write_sequnlock(&xtime_lock);
-	}
-	if ( !disarm_decr[smp_processor_id()] )
-		set_dec(next_dec);
-	last_jiffy_stamp(cpu) = jiffy_stamp;
-
-	if (ppc_md.heartbeat && !ppc_md.heartbeat_count--)
-		ppc_md.heartbeat();
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned delta, usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		sec = xtime.tv_sec;
-		usec = (xtime.tv_nsec / 1000);
-		delta = tb_ticks_since(tb_last_stamp);
-#ifdef CONFIG_SMP
-		/* As long as timebases are not in sync, gettimeofday can only
-		 * have jiffy resolution on SMP.
-		 */
-		if (!smp_tb_synchronized)
-			delta = 0;
-#endif /* CONFIG_SMP */
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	usec += mulhwu(tb_to_us, delta);
-	while (usec >= 1000000) {
-	  	sec++;
-		usec -= 1000000;
-	}
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, new_sec = tv->tv_sec;
-	long wtm_nsec, new_nsec = tv->tv_nsec;
-	unsigned long flags;
-	int tb_delta;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-	/* Updating the RTC is not the job of this code. If the time is
-	 * stepped under NTP, the RTC will be update after STA_UNSYNC
-	 * is cleared. Tool like clock/hwclock either copy the RTC
-	 * to the system time, in which case there is no point in writing
-	 * to the RTC again, or write to the RTC but then they don't call
-	 * settimeofday to perform this operation. Note also that
-	 * we don't touch the decrementer since:
-	 * a) it would lose timer interrupt synchronization on SMP
-	 * (if it is working one day)
-	 * b) it could make one jiffy spuriously shorter or longer
-	 * which would introduce another source of uncertainty potentially
-	 * harmful to relatively short timers.
-	 */
-
-	/* This works perfectly on SMP only if the tb are in sync but
-	 * guarantees an error < 1 jiffy even if they are off by eons,
-	 * still reasonable when gettimeofday resolution is 1 jiffy.
-	 */
-	tb_delta = tb_ticks_since(last_jiffy_stamp(smp_processor_id()));
-
-	new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
-	set_normalized_timespec(&xtime, new_sec, new_nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	/* In case of a large backwards jump in time with NTP, we want the
-	 * clock to be updated as soon as the PLL is again in lock.
-	 */
-	last_rtc_update = new_sec - 658;
-
-	ntp_clear();
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/* This function is only called on the boot processor */
-void __init time_init(void)
-{
-	time_t sec, old_sec;
-	unsigned old_stamp, stamp, elapsed;
-
-        if (ppc_md.time_init != NULL)
-                timezone_offset = ppc_md.time_init();
-
-	if (__USE_RTC()) {
-		/* 601 processor: dec counts down by 128 every 128ns */
-		tb_ticks_per_jiffy = DECREMENTER_COUNT_601;
-		/* mulhwu_scale_factor(1000000000, 1000000) is 0x418937 */
-		tb_to_us = 0x418937;
-        } else {
-                ppc_md.calibrate_decr();
-		tb_to_ns_scale = mulhwu(tb_to_us, 1000 << 10);
-	}
-
-	/* Now that the decrementer is calibrated, it can be used in case the
-	 * clock is stuck, but the fact that we have to handle the 601
-	 * makes things more complex. Repeatedly read the RTC until the
-	 * next second boundary to try to achieve some precision.  If there
-	 * is no RTC, we still need to set tb_last_stamp and
-	 * last_jiffy_stamp(cpu 0) to the current stamp.
-	 */
-	stamp = get_native_tbl();
-	if (ppc_md.get_rtc_time) {
-		sec = ppc_md.get_rtc_time();
-		elapsed = 0;
-		do {
-			old_stamp = stamp;
-			old_sec = sec;
-			stamp = get_native_tbl();
-			if (__USE_RTC() && stamp < old_stamp)
-				old_stamp -= 1000000000;
-			elapsed += stamp - old_stamp;
-			sec = ppc_md.get_rtc_time();
-		} while ( sec == old_sec && elapsed < 2*HZ*tb_ticks_per_jiffy);
-		if (sec==old_sec)
-			printk("Warning: real time clock seems stuck!\n");
-		xtime.tv_sec = sec;
-		xtime.tv_nsec = 0;
-		/* No update now, we just read the time from the RTC ! */
-		last_rtc_update = xtime.tv_sec;
-	}
-	last_jiffy_stamp(0) = tb_last_stamp = stamp;
-
-	/* Not exact, but the timer interrupt takes care of this */
-	set_dec(tb_ticks_per_jiffy);
-
-	/* If platform provided a timezone (pmac), we correct the time */
-        if (timezone_offset) {
-		sys_tz.tz_minuteswest = -timezone_offset / 60;
-		sys_tz.tz_dsttime = 0;
-		xtime.tv_sec -= timezone_offset;
-        }
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-}
-
-#define FEBRUARY		2
-#define	STARTOFTIME		1970
-#define SECDAY			86400L
-#define SECYR			(SECDAY * 365)
-
-/*
- * Note: this is wrong for 2100, but our signed 32-bit time_t will
- * have overflowed long before that, so who cares.  -- paulus
- */
-#define	leapyear(year)		((year) % 4 == 0)
-#define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
-#define	days_in_month(a) 	(month_days[(a) - 1])
-
-static int month_days[12] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-void to_tm(int tim, struct rtc_time * tm)
-{
-	register int i;
-	register long hms, day, gday;
-
-	gday = day = tim / SECDAY;
-	hms = tim % SECDAY;
-
-	/* Hours, minutes, seconds are easy */
-	tm->tm_hour = hms / 3600;
-	tm->tm_min = (hms % 3600) / 60;
-	tm->tm_sec = (hms % 3600) % 60;
-
-	/* Number of years in days */
-	for (i = STARTOFTIME; day >= days_in_year(i); i++)
-		day -= days_in_year(i);
-	tm->tm_year = i;
-
-	/* Number of months in days left */
-	if (leapyear(tm->tm_year))
-		days_in_month(FEBRUARY) = 29;
-	for (i = 1; day >= days_in_month(i); i++)
-		day -= days_in_month(i);
-	days_in_month(FEBRUARY) = 28;
-	tm->tm_mon = i;
-
-	/* Days are what is left over (+1) from all that. */
-	tm->tm_mday = day + 1;
-
-	/*
-	 * Determine the day of week. Jan. 1, 1970 was a Thursday.
-	 */
-	tm->tm_wday = (gday + 4) % 7;
-}
-
-/* Auxiliary function to compute scaling factors */
-/* Actually the choice of a timebase running at 1/4 the of the bus
- * frequency giving resolution of a few tens of nanoseconds is quite nice.
- * It makes this computation very precise (27-28 bits typically) which
- * is optimistic considering the stability of most processor clock
- * oscillators and the precision with which the timebase frequency
- * is measured but does not harm.
- */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
-	unsigned mlt=0, tmp, err;
-	/* No concern for performance, it's done once: use a stupid
-	 * but safe and compact method to find the multiplier.
-	 */
-	for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
-		if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
-	}
-	/* We might still be off by 1 for the best approximation.
-	 * A side effect of this is that if outscale is too large
-	 * the returned value will be zero.
-	 * Many corner cases have been checked and seem to work,
-	 * some might have been forgotten in the test however.
-	 */
-	err = inscale*(mlt+1);
-	if (err <= inscale/2) mlt++;
-	return mlt;
-}
-
-unsigned long long sched_clock(void)
-{
-	unsigned long lo, hi, hi2;
-	unsigned long long tb;
-
-	if (!__USE_RTC()) {
-		do {
-			hi = get_tbu();
-			lo = get_tbl();
-			hi2 = get_tbu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi << 32) | lo;
-		tb = (tb * tb_to_ns_scale) >> 10;
-	} else {
-		do {
-			hi = get_rtcu();
-			lo = get_rtcl();
-			hi2 = get_rtcu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi) * 1000000000 + lo;
-	}
-	return tb;
-}
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
deleted file mode 100644
index a467a429c2fe..000000000000
--- a/arch/ppc/kernel/traps.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  and Paul Mackerras (paulus@cs.anu.edu.au)
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/prctl.h>
-#include <linux/bug.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/xmon.h>
-#include <asm/pmc.h>
-
-#ifdef CONFIG_XMON
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-
-int (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#ifdef CONFIG_KGDB
-int (*debugger)(struct pt_regs *regs);
-int (*debugger_bpt)(struct pt_regs *regs);
-int (*debugger_sstep)(struct pt_regs *regs);
-int (*debugger_iabr_match)(struct pt_regs *regs);
-int (*debugger_dabr_match)(struct pt_regs *regs);
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#define debugger(regs)			do { } while (0)
-#define debugger_bpt(regs)		0
-#define debugger_sstep(regs)		0
-#define debugger_iabr_match(regs)	0
-#define debugger_dabr_match(regs)	0
-#define debugger_fault_handler		((void (*)(struct pt_regs *))0)
-#endif
-#endif
-
-/*
- * Trap & Exception support
- */
-
-DEFINE_SPINLOCK(die_lock);
-
-int die(const char * str, struct pt_regs * fp, long err)
-{
-	static int die_counter;
-	int nl = 0;
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-	nl = 1;
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP NR_CPUS=%d ", NR_CPUS);
-	nl = 1;
-#endif
-	if (nl)
-		printk("\n");
-	show_regs(fp);
-	add_taint(TAINT_DIE);
-	spin_unlock_irq(&die_lock);
-	/* do_exit() should take care of panic'ing from an interrupt
-	 * context so we don't handle it here
-	 */
-	do_exit(err);
-}
-
-void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
-{
-	siginfo_t info;
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Exception in kernel mode", regs, signr);
-	}
-	info.si_signo = signr;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = (void __user *) addr;
-	force_sig_info(signr, &info, current);
-
-	/*
-	 * Init gets no signals that it doesn't have a handler for.
-	 * That's all very well, but if it has caused a synchronous
-	 * exception and we ignore the resulting signal, it will just
-	 * generate the same exception over and over again and we get
-	 * nowhere.  Better to kill it and let the kernel panic.
-	 */
-	if (is_global_init(current)) {
-		__sighandler_t handler;
-
-		spin_lock_irq(&current->sighand->siglock);
-		handler = current->sighand->action[signr-1].sa.sa_handler;
-		spin_unlock_irq(&current->sighand->siglock);
-		if (handler == SIG_DFL) {
-			/* init has generated a synchronous exception
-			   and it doesn't have a handler for the signal */
-			printk(KERN_CRIT "init has generated signal %d "
-			       "but has no handler for it\n", signr);
-			do_exit(signr);
-		}
-	}
-}
-
-/*
- * I/O accesses can cause machine checks on powermacs.
- * Check if the NIP corresponds to the address of a sync
- * instruction for which there is an entry in the exception
- * table.
- * Note that the 601 only takes a machine check on TEA
- * (transfer error ack) signal assertion, and does not
- * set any of the top 16 bits of SRR1.
- *  -- paulus.
- */
-static inline int check_io_access(struct pt_regs *regs)
-{
-#if defined CONFIG_8xx
-	unsigned long msr = regs->msr;
-	const struct exception_table_entry *entry;
-	unsigned int *nip = (unsigned int *)regs->nip;
-
-	if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
-	    && (entry = search_exception_tables(regs->nip)) != NULL) {
-		/*
-		 * Check that it's a sync instruction, or somewhere
-		 * in the twi; isync; nop sequence that inb/inw/inl uses.
-		 * As the address is in the exception table
-		 * we should be able to read the instr there.
-		 * For the debug message, we look at the preceding
-		 * load or store.
-		 */
-		if (*nip == 0x60000000)		/* nop */
-			nip -= 2;
-		else if (*nip == 0x4c00012c)	/* isync */
-			--nip;
-		/* eieio from I/O string functions */
-		else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac)
-			nip += 2;
-		if (*nip == 0x7c0004ac || (*nip >> 26) == 3 ||
-			(*(nip+1) >> 26) == 3) {
-			/* sync or twi */
-			unsigned int rb;
-
-			--nip;
-			rb = (*nip >> 11) & 0x1f;
-			printk(KERN_DEBUG "%s bad port %lx at %p\n",
-			       (*nip & 0x100)? "OUT to": "IN from",
-			       regs->gpr[rb] - _IO_BASE, nip);
-			regs->msr |= MSR_RI;
-			regs->nip = entry->fixup;
-			return 1;
-		}
-	}
-#endif /* CONFIG_8xx */
-	return 0;
-}
-
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-/* On 4xx, the reason for the machine check or program exception
-   is in the ESR. */
-#define get_reason(regs)	((regs)->dsisr)
-#define get_mc_reason(regs)	((regs)->dsisr)
-#define REASON_FP		ESR_FP
-#define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
-#define REASON_PRIVILEGED	ESR_PPR
-#define REASON_TRAP		ESR_PTR
-
-/* single-step stuff */
-#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
-#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
-
-#else
-/* On non-4xx, the reason for the machine check or program
-   exception is in the MSR. */
-#define get_reason(regs)	((regs)->msr)
-#define get_mc_reason(regs)	((regs)->msr)
-#define REASON_FP		0x100000
-#define REASON_ILLEGAL		0x80000
-#define REASON_PRIVILEGED	0x40000
-#define REASON_TRAP		0x20000
-
-#define single_stepping(regs)	((regs)->msr & MSR_SE)
-#define clear_single_step(regs)	((regs)->msr &= ~MSR_SE)
-#endif
-
-/*
- * This is "fall-back" implementation for configurations
- * which don't provide platform-specific machine check info
- */
-void __attribute__ ((weak))
-platform_machine_check(struct pt_regs *regs)
-{
-}
-
-#if defined(CONFIG_4xx)
-int machine_check_4xx(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	if (reason & ESR_IMCP) {
-		printk("Instruction");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	} else
-		printk("Data");
-	printk(" machine check in kernel mode.\n");
-
-	return 0;
-}
-
-int machine_check_440A(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	if (reason & ESR_IMCP){
-		printk("Instruction Synchronous Machine Check exception\n");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	}
-	else {
-		u32 mcsr = mfspr(SPRN_MCSR);
-		if (mcsr & MCSR_IB)
-			printk("Instruction Read PLB Error\n");
-		if (mcsr & MCSR_DRB)
-			printk("Data Read PLB Error\n");
-		if (mcsr & MCSR_DWB)
-			printk("Data Write PLB Error\n");
-		if (mcsr & MCSR_TLBP)
-			printk("TLB Parity Error\n");
-		if (mcsr & MCSR_ICP){
-			flush_instruction_cache();
-			printk("I-Cache Parity Error\n");
-		}
-		if (mcsr & MCSR_DCSP)
-			printk("D-Cache Search Parity Error\n");
-		if (mcsr & MCSR_DCFP)
-			printk("D-Cache Flush Parity Error\n");
-		if (mcsr & MCSR_IMPE)
-			printk("Machine Check exception is imprecise\n");
-
-		/* Clear MCSR */
-		mtspr(SPRN_MCSR, mcsr);
-	}
-	return 0;
-}
-#else
-int machine_check_generic(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	printk("Caused by (from SRR1=%lx): ", reason);
-	switch (reason & 0x601F0000) {
-	case 0x80000:
-		printk("Machine check signal\n");
-		break;
-	case 0:		/* for 601 */
-	case 0x40000:
-	case 0x140000:	/* 7450 MSS error and TEA */
-		printk("Transfer error ack signal\n");
-		break;
-	case 0x20000:
-		printk("Data parity error signal\n");
-		break;
-	case 0x10000:
-		printk("Address parity error signal\n");
-		break;
-	case 0x20000000:
-		printk("L1 Data Cache error\n");
-		break;
-	case 0x40000000:
-		printk("L1 Instruction Cache error\n");
-		break;
-	case 0x00100000:
-		printk("L2 data cache parity error\n");
-		break;
-	default:
-		printk("Unknown values in msr\n");
-	}
-	return 0;
-}
-#endif /* everything else */
-
-void machine_check_exception(struct pt_regs *regs)
-{
-	int recover = 0;
-
-	if (cur_cpu_spec->machine_check)
-		recover = cur_cpu_spec->machine_check(regs);
-	if (recover > 0)
-		return;
-
-	if (user_mode(regs)) {
-		regs->msr |= MSR_RI;
-		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
-		return;
-	}
-
-#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
-	/* the qspan pci read routines can cause machine checks -- Cort */
-	bad_page_fault(regs, regs->dar, SIGBUS);
-	return;
-#endif
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		regs->msr |= MSR_RI;
-		return;
-	}
-
-	if (check_io_access(regs))
-		return;
-
-	/*
-	 * Optional platform-provided routine to print out
-	 * additional info, e.g. bus error registers.
-	 */
-	platform_machine_check(regs);
-
-	debugger(regs);
-	die("machine check", regs, SIGBUS);
-}
-
-void SMIException(struct pt_regs *regs)
-{
-	debugger(regs);
-#if !(defined(CONFIG_XMON) || defined(CONFIG_KGDB))
-	show_regs(regs);
-	panic("System Management Interrupt");
-#endif
-}
-
-void unknown_exception(struct pt_regs *regs)
-{
-	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-void instruction_breakpoint_exception(struct pt_regs *regs)
-{
-	if (debugger_iabr_match(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-}
-
-void RunModeException(struct pt_regs *regs)
-{
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-/* Illegal instruction emulation support.  Originally written to
- * provide the PVR to user applications using the mfspr rd, PVR.
- * Return non-zero if we can't emulate, or -EFAULT if the associated
- * memory access caused an access fault.  Return zero on success.
- *
- * There are a couple of ways to do this, either "decode" the instruction
- * or directly match lots of bits.  In this case, matching lots of
- * bits is faster and easier.
- *
- */
-#define INST_MFSPR_PVR		0x7c1f42a6
-#define INST_MFSPR_PVR_MASK	0xfc1fffff
-
-#define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
-
-#define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
-
-#define INST_STRING		0x7c00042a
-#define INST_STRING_MASK	0x7c0007fe
-#define INST_STRING_GEN_MASK	0x7c00067e
-#define INST_LSWI		0x7c0004aa
-#define INST_LSWX		0x7c00042a
-#define INST_STSWI		0x7c0005aa
-#define INST_STSWX		0x7c00052a
-
-static int emulate_string_inst(struct pt_regs *regs, u32 instword)
-{
-	u8 rT = (instword >> 21) & 0x1f;
-	u8 rA = (instword >> 16) & 0x1f;
-	u8 NB_RB = (instword >> 11) & 0x1f;
-	u32 num_bytes;
-	unsigned long EA;
-	int pos = 0;
-
-	/* Early out if we are an invalid form of lswx */
-	if ((instword & INST_STRING_MASK) == INST_LSWX)
-		if ((rT == rA) || (rT == NB_RB))
-			return -EINVAL;
-
-	EA = (rA == 0) ? 0 : regs->gpr[rA];
-
-	switch (instword & INST_STRING_MASK) {
-		case INST_LSWX:
-		case INST_STSWX:
-			EA += NB_RB;
-			num_bytes = regs->xer & 0x7f;
-			break;
-		case INST_LSWI:
-		case INST_STSWI:
-			num_bytes = (NB_RB == 0) ? 32 : NB_RB;
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	while (num_bytes != 0)
-	{
-		u8 val;
-		u32 shift = 8 * (3 - (pos & 0x3));
-
-		switch ((instword & INST_STRING_MASK)) {
-			case INST_LSWX:
-			case INST_LSWI:
-				if (get_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				/* first time updating this reg,
-				 * zero it out */
-				if (pos == 0)
-					regs->gpr[rT] = 0;
-				regs->gpr[rT] |= val << shift;
-				break;
-			case INST_STSWI:
-			case INST_STSWX:
-				val = regs->gpr[rT] >> shift;
-				if (put_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				break;
-		}
-		/* move EA to next address */
-		EA += 1;
-		num_bytes--;
-
-		/* manage our position within the register */
-		if (++pos == 4) {
-			pos = 0;
-			if (++rT == 32)
-				rT = 0;
-		}
-	}
-
-	return 0;
-}
-
-static int emulate_instruction(struct pt_regs *regs)
-{
-	u32 instword;
-	u32 rd;
-
-	if (!user_mode(regs))
-		return -EINVAL;
-	CHECK_FULL_REGS(regs);
-
-	if (get_user(instword, (u32 __user *)(regs->nip)))
-		return -EFAULT;
-
-	/* Emulate the mfspr rD, PVR.
-	 */
-	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
-		rd = (instword >> 21) & 0x1f;
-		regs->gpr[rd] = mfspr(SPRN_PVR);
-		return 0;
-	}
-
-	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & INST_DCBA_MASK) == INST_DCBA)
-		return 0;
-
-	/* Emulate the mcrxr insn.  */
-	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
-		int shift = (instword >> 21) & 0x1c;
-		unsigned long msk = 0xf0000000UL >> shift;
-
-		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
-		regs->xer &= ~0xf0000000UL;
-		return 0;
-	}
-
-	/* Emulate load/store string insn. */
-	if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
-		return emulate_string_inst(regs, instword);
-
-	return -EINVAL;
-}
-
-/*
- * After we have successfully emulated an instruction, we have to
- * check if the instruction was being single-stepped, and if so,
- * pretend we got a single-step exception.  This was pointed out
- * by Kumar Gala.  -- paulus
- */
-static void emulate_single_step(struct pt_regs *regs)
-{
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
-	return addr >= PAGE_OFFSET;
-}
-
-void program_check_exception(struct pt_regs *regs)
-{
-	unsigned int reason = get_reason(regs);
-	extern int do_mathemu(struct pt_regs *regs);
-
-#ifdef CONFIG_MATH_EMULATION
-	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
-	 * but there seems to be a hardware bug on the 405GP (RevD)
-	 * that means ESR is sometimes set incorrectly - either to
-	 * ESR_DST (!?) or 0.  In the process of chasing this with the
-	 * hardware people - not sure if it can happen on any illegal
-	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurrences etc. -dgibson 31/Mar/2003 */
-	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
-		emulate_single_step(regs);
-		return;
-	}
-#endif /* CONFIG_MATH_EMULATION */
-
-	if (reason & REASON_FP) {
-		/* IEEE FP exception */
-		int code = 0;
-		u32 fpscr;
-
-		/* We must make sure the FP state is consistent with
-		 * our MSR_FP in regs
-		 */
-		preempt_disable();
-		if (regs->msr & MSR_FP)
-			giveup_fpu(current);
-		preempt_enable();
-
-		fpscr = current->thread.fpscr.val;
-		fpscr &= fpscr << 22;	/* mask summary bits with enables */
-		if (fpscr & FPSCR_VX)
-			code = FPE_FLTINV;
-		else if (fpscr & FPSCR_OX)
-			code = FPE_FLTOVF;
-		else if (fpscr & FPSCR_UX)
-			code = FPE_FLTUND;
-		else if (fpscr & FPSCR_ZX)
-			code = FPE_FLTDIV;
-		else if (fpscr & FPSCR_XX)
-			code = FPE_FLTRES;
-		_exception(SIGFPE, regs, code, regs->nip);
-		return;
-	}
-
-	if (reason & REASON_TRAP) {
-		/* trap exception */
-		if (debugger_bpt(regs))
-			return;
-
-		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
-		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
-			regs->nip += 4;
-			return;
-		}
-		_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-		return;
-	}
-
-	/* Try to emulate it if we should. */
-	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
-		switch (emulate_instruction(regs)) {
-		case 0:
-			regs->nip += 4;
-			emulate_single_step(regs);
-			return;
-		case -EFAULT:
-			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-			return;
-		}
-	}
-
-	if (reason & REASON_PRIVILEGED)
-		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
-	else
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-}
-
-void single_step_exception(struct pt_regs *regs)
-{
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
-	if (debugger_sstep(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-}
-
-void alignment_exception(struct pt_regs *regs)
-{
-	int sig, code, fixed = 0;
-
-	fixed = fix_alignment(regs);
-	if (fixed == 1) {
-		regs->nip += 4;	/* skip over emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-	if (fixed == -EFAULT) {
-		sig = SIGSEGV;
-		code = SEGV_ACCERR;
-	} else {
-		sig = SIGBUS;
-		code = BUS_ADRALN;
-	}
-	if (user_mode(regs))
-		_exception(sig, regs, code, regs->dar);
-	else
-		bad_page_fault(regs, regs->dar, sig);
-}
-
-void StackOverflow(struct pt_regs *regs)
-{
-	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
-	       current, regs->gpr[1]);
-	debugger(regs);
-	show_regs(regs);
-	panic("kernel stack overflow");
-}
-
-void nonrecoverable_exception(struct pt_regs *regs)
-{
-	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
-	       regs->nip, regs->msr);
-	debugger(regs);
-	die("nonrecoverable exception", regs, SIGKILL);
-}
-
-void trace_syscall(struct pt_regs *regs)
-{
-	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
-	       current, current->pid, regs->nip, regs->link, regs->gpr[0],
-	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
-}
-
-#ifdef CONFIG_8xx
-void SoftwareEmulation(struct pt_regs *regs)
-{
-	extern int do_mathemu(struct pt_regs *);
-	extern int Soft_emulate_8xx(struct pt_regs *);
-	int errcode;
-
-	CHECK_FULL_REGS(regs);
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
-	}
-
-#ifdef CONFIG_MATH_EMULATION
-	errcode = do_mathemu(regs);
-#else
-	errcode = Soft_emulate_8xx(regs);
-#endif
-	if (errcode) {
-		if (errcode > 0)
-			_exception(SIGFPE, regs, 0, 0);
-		else if (errcode == -EFAULT)
-			_exception(SIGSEGV, regs, 0, 0);
-		else
-			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-	} else
-		emulate_single_step(regs);
-}
-#endif /* CONFIG_8xx */
-
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
-{
-	if (debug_status & DBSR_IC) {	/* instruction completion */
-		regs->msr &= ~MSR_DE;
-		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
-		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if !defined(CONFIG_TAU_INT)
-void TAUException(struct pt_regs *regs)
-{
-	printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-}
-#endif /* CONFIG_INT_TAU */
-
-/*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
-void kernel_fp_unavailable_exception(struct pt_regs *regs)
-{
-	regs->msr |= MSR_FP;
-	printk(KERN_ERR "floating point used in kernel (task=%p, pc=%lx)\n",
-	       current, regs->nip);
-}
-
-void altivec_unavailable_exception(struct pt_regs *regs)
-{
-	static int kernel_altivec_count;
-
-#ifndef CONFIG_ALTIVEC
-	if (user_mode(regs)) {
-		/* A user program has executed an altivec instruction,
-		   but this kernel doesn't support altivec. */
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	}
-#endif
-	/* The kernel has executed an altivec instruction without
-	   first enabling altivec.  Whinge but let it do it. */
-	if (++kernel_altivec_count < 10)
-		printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n",
-		       current, regs->nip);
-	regs->msr |= MSR_VEC;
-}
-
-#ifdef CONFIG_ALTIVEC
-void altivec_assist_exception(struct pt_regs *regs)
-{
-	int err;
-
-	preempt_disable();
-	if (regs->msr & MSR_VEC)
-		giveup_altivec(current);
-	preempt_enable();
-	if (!user_mode(regs)) {
-		printk(KERN_ERR "altivec assist exception in kernel mode"
-		       " at %lx\n", regs->nip);
-		debugger(regs);
-		die("altivec assist exception", regs, SIGFPE);
-		return;
-	}
-
-	err = emulate_altivec(regs);
-	if (err == 0) {
-		regs->nip += 4;		/* skip emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-
-	if (err == -EFAULT) {
-		/* got an error reading the instruction */
-		_exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
-	} else {
-		/* didn't recognize the instruction */
-		/* XXX quick hack for now: set the non-Java bit in the VSCR */
-		printk(KERN_ERR "unrecognized altivec instruction "
-		       "in %s at %lx\n", current->comm, regs->nip);
-		current->thread.vscr.u[3] |= 0x10000;
-	}
-}
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_BOOKE_WDT
-/*
- * Default handler for a Watchdog exception,
- * spins until a reboot occurs
- */
-void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
-{
-	/* Generic WatchdogHandler, implement your own */
-	mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE));
-	return;
-}
-
-void WatchdogException(struct pt_regs *regs)
-{
-	printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
-	WatchdogHandler(regs);
-}
-#endif
-
-void __init trap_init(void)
-{
-}
diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S
deleted file mode 100644
index 8a24bc47eb6c..000000000000
--- a/arch/ppc/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,164 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(powerpc:common)
-jiffies = jiffies_64 + 4;
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .gnu.hash      : { *(.gnu.hash)	}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-/*  .init          : { *(.init)	} =0*/
-  .plt : { *(.plt) }
-  .text      :
-  {
-    _text = .;
-    TEXT_TEXT
-    SCHED_TEXT
-    LOCK_TEXT
-    *(.fixup)
-    *(.got1)
-    __got2_start = .;
-    *(.got2)
-    __got2_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  RODATA
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  .fixup   : { *(.fixup) }
-
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
-
-	__bug_table : {
-		__start___bug_table = .;
-		*(__bug_table)
-		__stop___bug_table = .;
-	}
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    DATA_DATA
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
-  NOTES
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  /* .exit.text is discarded at runtime, not link time,
-     to deal with references from __bug_table */
-  .exit.text : { EXIT_TEXT }
-  .init.data : {
-    INIT_DATA
-    __vtop_table_begin = .;
-    *(.vtop_fixup);
-    __vtop_table_end = .;
-    __ptov_table_begin = .;
-    *(.ptov_fixup);
-    __ptov_table_end = .;
-  }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-  __start___ftr_fixup = .;
-  __ftr_fixup : { *(__ftr_fixup) }
-  __stop___ftr_fixup = .;
-
-  PERCPU(4096)
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  . = ALIGN(4096);
-  __init_end = .;
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_stop = .;
-
-  _end = . ;
-  PROVIDE (end = .);
-
-  /* Sections to be discarded. */
-  /DISCARD/ : {
-    *(.exitcall.exit)
-    EXIT_DATA
-  }
-}
diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile
deleted file mode 100644
index 095e661e79dd..000000000000
--- a/arch/ppc/lib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for ppc-specific library files..
-#
-
-obj-y			:= checksum.o string.o div64.o
diff --git a/arch/ppc/lib/checksum.S b/arch/ppc/lib/checksum.S
deleted file mode 100644
index 7874e8a80455..000000000000
--- a/arch/ppc/lib/checksum.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * This file contains assembly-language implementations
- * of IP-style 1's complement checksum routines.
- *	
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/sys.h>
-#include <asm/processor.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- * ip_fast_csum(buf, len) -- Optimized for IP header
- * len is in words and is always >= 5.
- */
-_GLOBAL(ip_fast_csum)
-	lwz	r0,0(r3)
-	lwzu	r5,4(r3)
-	addic.	r4,r4,-2
-	addc	r0,r0,r5
-	mtctr	r4
-	blelr-
-1:	lwzu	r4,4(r3)
-	adde	r0,r0,r4
-	bdnz	1b
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * Compute checksum of TCP or UDP pseudo-header:
- *   csum_tcpudp_magic(saddr, daddr, len, proto, sum)
- */	
-_GLOBAL(csum_tcpudp_magic)
-	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
-	addc	r0,r3,r4	/* add 4 32-bit words together */
-	adde	r0,r0,r5
-	adde	r0,r0,r7
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * csum_partial(buff, len, sum)
- */
-_GLOBAL(csum_partial)
-	addic	r0,r5,0
-	subi	r3,r3,4
-	srwi.	r6,r4,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r5,r3,2		/* Align buffer to longword boundary */
-	beq+	1f
-	lhz	r5,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r4,r4,2
-	addc	r0,r0,r5
-	srwi.	r6,r4,2		/* # words to do */
-	beq	3f
-1:	mtctr	r6
-2:	lwzu	r5,4(r3)	/* the bdnz has zero overhead, so it should */
-	adde	r0,r0,r5	/* be unnecessary to unroll this loop */
-	bdnz	2b
-	andi.	r4,r4,3
-3:	cmpwi	0,r4,2
-	blt+	4f
-	lhz	r5,4(r3)
-	addi	r3,r3,2
-	subi	r4,r4,2
-	adde	r0,r0,r5
-4:	cmpwi	0,r4,1
-	bne+	5f
-	lbz	r5,4(r3)
-	slwi	r5,r5,8		/* Upper byte of word */
-	adde	r0,r0,r5
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/*
- * Computes the checksum of a memory block at src, length len,
- * and adds in "sum" (32-bit), while copying the block to dst.
- * If an access exception occurs on src or dst, it stores -EFAULT
- * to *src_err or *dst_err respectively, and (for an error on
- * src) zeroes the rest of dst.
- *
- * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
- */
-_GLOBAL(csum_partial_copy_generic)
-	addic	r0,r6,0
-	subi	r3,r3,4
-	subi	r4,r4,4
-	srwi.	r6,r5,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r9,r4,2		/* Align dst to longword boundary */
-	beq+	1f
-81:	lhz	r6,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r5,r5,2
-91:	sth	r6,4(r4)
-	addi	r4,r4,2
-	addc	r0,r0,r6
-	srwi.	r6,r5,2		/* # words to do */
-	beq	3f
-1:	srwi.	r6,r5,4		/* # groups of 4 words to do */
-	beq	10f
-	mtctr	r6
-71:	lwz	r6,4(r3)
-72:	lwz	r9,8(r3)
-73:	lwz	r10,12(r3)
-74:	lwzu	r11,16(r3)
-	adde	r0,r0,r6
-75:	stw	r6,4(r4)
-	adde	r0,r0,r9
-76:	stw	r9,8(r4)
-	adde	r0,r0,r10
-77:	stw	r10,12(r4)
-	adde	r0,r0,r11
-78:	stwu	r11,16(r4)
-	bdnz	71b
-10:	rlwinm.	r6,r5,30,30,31	/* # words left to do */
-	beq	13f
-	mtctr	r6
-82:	lwzu	r9,4(r3)
-92:	stwu	r9,4(r4)
-	adde	r0,r0,r9
-	bdnz	82b
-13:	andi.	r5,r5,3
-3:	cmpwi	0,r5,2
-	blt+	4f
-83:	lhz	r6,4(r3)
-	addi	r3,r3,2
-	subi	r5,r5,2
-93:	sth	r6,4(r4)
-	addi	r4,r4,2
-	adde	r0,r0,r6
-4:	cmpwi	0,r5,1
-	bne+	5f
-84:	lbz	r6,4(r3)
-94:	stb	r6,4(r4)
-	slwi	r6,r6,8		/* Upper byte of word */
-	adde	r0,r0,r6
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/* These shouldn't go in the fixup section, since that would
-   cause the ex_table addresses to get out of order. */
-
-src_error_4:
-	mfctr	r6		/* update # bytes remaining from ctr */
-	rlwimi	r5,r6,4,0,27
-	b	79f
-src_error_1:
-	li	r6,0
-	subi	r5,r5,2
-95:	sth	r6,4(r4)
-	addi	r4,r4,2
-79:	srwi.	r6,r5,2
-	beq	3f
-	mtctr	r6
-src_error_2:
-	li	r6,0
-96:	stwu	r6,4(r4)
-	bdnz	96b
-3:	andi.	r5,r5,3
-	beq	src_error
-src_error_3:
-	li	r6,0
-	mtctr	r5
-	addi	r4,r4,3
-97:	stbu	r6,1(r4)
-	bdnz	97b
-src_error:
-	cmpwi	0,r7,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r7)
-1:	addze	r3,r0
-	blr
-
-dst_error:
-	cmpwi	0,r8,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r8)
-1:	addze	r3,r0
-	blr
-
-.section __ex_table,"a"
-	.long	81b,src_error_1
-	.long	91b,dst_error
-	.long	71b,src_error_4
-	.long	72b,src_error_4
-	.long	73b,src_error_4
-	.long	74b,src_error_4
-	.long	75b,dst_error
-	.long	76b,dst_error
-	.long	77b,dst_error
-	.long	78b,dst_error
-	.long	82b,src_error_2
-	.long	92b,dst_error
-	.long	83b,src_error_3
-	.long	93b,dst_error
-	.long	84b,src_error_3
-	.long	94b,dst_error
-	.long	95b,dst_error
-	.long	96b,dst_error
-	.long	97b,dst_error
diff --git a/arch/ppc/lib/div64.S b/arch/ppc/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/lib/locks.c b/arch/ppc/lib/locks.c
deleted file mode 100644
index ea4aee6b20e6..000000000000
--- a/arch/ppc/lib/locks.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Locks for smp ppc
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/ppc_asm.h>
-#include <asm/smp.h>
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-
-#undef INIT_STUCK
-#define INIT_STUCK 200000000 /*0xffffffff*/
-
-/*
- * Try to acquire a spinlock.
- * Only does the stwcx. if the load returned 0 - the Programming
- * Environments Manual suggests not doing unnecessary stcwx.'s
- * since they may inhibit forward progress by other CPUs in getting
- * a lock.
- */
-static inline unsigned long __spin_trylock(volatile unsigned long *lock)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__ ("\n\
-1:	lwarx	%0,0,%1\n\
-	cmpwi	0,%0,0\n\
-	bne	2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%2,0,%1\n\
-	bne-	1b\n\
-	isync\n\
-2:"
-	: "=&r"(ret)
-	: "r"(lock), "r"(1)
-	: "cr0", "memory");
-
-	return ret;
-}
-
-void _raw_spin_lock(spinlock_t *lock)
-{
-	int cpu = smp_processor_id();
-	unsigned int stuck = INIT_STUCK;
-	while (__spin_trylock(&lock->lock)) {
-		while ((unsigned volatile long)lock->lock != 0) {
-			if (!--stuck) {
-				printk("_spin_lock(%p) CPU#%d NIP %p"
-				       " holder: cpu %ld pc %08lX\n",
-				       lock, cpu, __builtin_return_address(0),
-				       lock->owner_cpu,lock->owner_pc);
-				stuck = INIT_STUCK;
-				/* steal the lock */
-				/*xchg_u32((void *)&lock->lock,0);*/
-			}
-		}
-	}
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	lock->owner_cpu = cpu;
-}
-EXPORT_SYMBOL(_raw_spin_lock);
-
-int _raw_spin_trylock(spinlock_t *lock)
-{
-	if (__spin_trylock(&lock->lock))
-		return 0;
-	lock->owner_cpu = smp_processor_id();
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	return 1;
-}
-EXPORT_SYMBOL(_raw_spin_trylock);
-
-void _raw_spin_unlock(spinlock_t *lp)
-{
-  	if ( !lp->lock )
-		printk("_spin_unlock(%p): no lock cpu %d curr PC %p %s/%d\n",
-		       lp, smp_processor_id(), __builtin_return_address(0),
-		       current->comm, current->pid);
-	if ( lp->owner_cpu != smp_processor_id() )
-		printk("_spin_unlock(%p): cpu %d trying clear of cpu %d pc %lx val %lx\n",
-		      lp, smp_processor_id(), (int)lp->owner_cpu,
-		      lp->owner_pc,lp->lock);
-	lp->owner_pc = lp->owner_cpu = 0;
-	wmb();
-	lp->lock = 0;
-}
-EXPORT_SYMBOL(_raw_spin_unlock);
-
-/*
- * For rwlocks, zero is unlocked, -1 is write-locked,
- * positive is read-locked.
- */
-static __inline__ int __read_trylock(rwlock_t *rw)
-{
-	signed int tmp;
-
-	__asm__ __volatile__(
-"2:	lwarx	%0,0,%1		# __read_trylock\n\
-	addic.	%0,%0,1\n\
-	ble-	1f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	2b\n\
-	isync\n\
-1:"
-	: "=&r"(tmp)
-	: "r"(&rw->lock)
-	: "cr0", "memory");
-
-	return tmp;
-}
-
-int _raw_read_trylock(rwlock_t *rw)
-{
-	return __read_trylock(rw) > 0;
-}
-EXPORT_SYMBOL(_raw_read_trylock);
-
-void _raw_read_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (__read_trylock(rw) <= 0) {
-		stuck = INIT_STUCK;
-		while (!read_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("_read_lock(%p) CPU#%d lock %d\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-}
-EXPORT_SYMBOL(_raw_read_lock);
-
-void _raw_read_unlock(rwlock_t *rw)
-{
-	if ( rw->lock == 0 )
-		printk("_read_unlock(): %s/%d (nip %08lX) lock %d\n",
-		       current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	atomic_dec((atomic_t *) &(rw)->lock);
-}
-EXPORT_SYMBOL(_raw_read_unlock);
-
-void _raw_write_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (cmpxchg(&rw->lock, 0, -1) != 0) {
-		stuck = INIT_STUCK;
-		while (!write_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("write_lock(%p) CPU#%d lock %d)\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-	wmb();
-}
-EXPORT_SYMBOL(_raw_write_lock);
-
-int _raw_write_trylock(rwlock_t *rw)
-{
-	if (cmpxchg(&rw->lock, 0, -1) != 0)
-		return 0;
-	wmb();
-	return 1;
-}
-EXPORT_SYMBOL(_raw_write_trylock);
-
-void _raw_write_unlock(rwlock_t *rw)
-{
-	if (rw->lock >= 0)
-		printk("_write_lock(): %s/%d (nip %08lX) lock %d\n",
-		      current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	rw->lock = 0;
-}
-EXPORT_SYMBOL(_raw_write_unlock);
-
-#endif
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
deleted file mode 100644
index 927253bfc826..000000000000
--- a/arch/ppc/lib/string.S
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-#define COPY_16_BYTES		\
-	lwz	r7,4(r4);	\
-	lwz	r8,8(r4);	\
-	lwz	r9,12(r4);	\
-	lwzu	r10,16(r4);	\
-	stw	r7,4(r6);	\
-	stw	r8,8(r6);	\
-	stw	r9,12(r6);	\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_WITHEX(n)	\
-8 ## n ## 0:			\
-	lwz	r7,4(r4);	\
-8 ## n ## 1:			\
-	lwz	r8,8(r4);	\
-8 ## n ## 2:			\
-	lwz	r9,12(r4);	\
-8 ## n ## 3:			\
-	lwzu	r10,16(r4);	\
-8 ## n ## 4:			\
-	stw	r7,4(r6);	\
-8 ## n ## 5:			\
-	stw	r8,8(r6);	\
-8 ## n ## 6:			\
-	stw	r9,12(r6);	\
-8 ## n ## 7:			\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_EXCODE(n)			\
-9 ## n ## 0:					\
-	addi	r5,r5,-(16 * n);		\
-	b	104f;				\
-9 ## n ## 1:					\
-	addi	r5,r5,-(16 * n);		\
-	b	105f;				\
-.section __ex_table,"a";			\
-	.align	2;				\
-	.long	8 ## n ## 0b,9 ## n ## 0b;	\
-	.long	8 ## n ## 1b,9 ## n ## 0b;	\
-	.long	8 ## n ## 2b,9 ## n ## 0b;	\
-	.long	8 ## n ## 3b,9 ## n ## 0b;	\
-	.long	8 ## n ## 4b,9 ## n ## 1b;	\
-	.long	8 ## n ## 5b,9 ## n ## 1b;	\
-	.long	8 ## n ## 6b,9 ## n ## 1b;	\
-	.long	8 ## n ## 7b,9 ## n ## 1b;	\
-	.text
-
-	.text
-	.stabs	"arch/ppc/lib/",N_SO,0,0,0f
-	.stabs	"string.S",N_SO,0,0,0f
-
-CACHELINE_BYTES = L1_CACHE_BYTES
-LG_CACHELINE_BYTES = L1_CACHE_SHIFT
-CACHELINE_MASK = (L1_CACHE_BYTES-1)
-
-_GLOBAL(strcpy)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-/* This clears out any unused part of the destination buffer,
-   just as the libc version does.  -- paulus */
-_GLOBAL(strncpy)
-	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	bnelr			/* if we didn't hit a null char, we're done */
-	mfctr	r5
-	cmpwi	0,r5,0		/* any space left in destination buffer? */
-	beqlr			/* we know r0 == 0 here */
-2:	stbu	r0,1(r6)	/* clear it out if so */
-	bdnz	2b
-	blr
-
-_GLOBAL(strcat)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r5)
-	cmpwi	0,r0,0
-	bne	1b
-	addi	r5,r5,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-_GLOBAL(strcmp)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	beq	1b
-	blr
-
-_GLOBAL(strncmp)
-	PPC_LCMPI r5,0
-	beqlr
-	mtctr	r5
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	bdnzt	eq,1b
-	blr
-
-_GLOBAL(strlen)
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-/*
- * Use dcbz on the complete cache lines in the destination
- * to set them to zero.  This requires that the destination
- * area is cacheable.  -- paulus
- */
-_GLOBAL(cacheable_memzero)
-	mr	r5,r4
-	li	r4,0
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
-	add	r8,r7,r5
-	srwi	r9,r8,LG_CACHELINE_BYTES
-	addic.	r9,r9,-1	/* total number of complete cachelines */
-	ble	2f
-	xori	r0,r7,CACHELINE_MASK & ~3
-	srwi.	r0,r0,2
-	beq	3f
-	mtctr	r0
-4:	stwu	r4,4(r6)
-	bdnz	4b
-3:	mtctr	r9
-	li	r7,4
-#if !defined(CONFIG_8xx)
-10:	dcbz	r7,r6
-#else
-10:	stw	r4, 4(r6)
-	stw	r4, 8(r6)
-	stw	r4, 12(r6)
-	stw	r4, 16(r6)
-#if CACHE_LINE_SIZE >= 32
-	stw	r4, 20(r6)
-	stw	r4, 24(r6)
-	stw	r4, 28(r6)
-	stw	r4, 32(r6)
-#endif /* CACHE_LINE_SIZE */
-#endif
-	addi	r6,r6,CACHELINE_BYTES
-	bdnz	10b
-	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
-	addi	r5,r5,4
-2:	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-_GLOBAL(memset)
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-/*
- * This version uses dcbz on the complete cache lines in the
- * destination area to reduce memory traffic.  This requires that
- * the destination area is cacheable.
- * We only use this version if the source and dest don't overlap.
- * -- paulus.
- */
-_GLOBAL(cacheable_memcpy)
-	add	r7,r3,r5		/* test if the src & dst overlap */
-	add	r8,r4,r5
-	cmplw	0,r4,r7
-	cmplw	1,r3,r8
-	crand	0,0,4			/* cr0.lt &= cr1.lt */
-	blt	memcpy			/* if regions overlap */
-
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	subf	r5,r0,r5
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-	stwu	r9,4(r6)
-	bdnz	72b
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	mtctr	r0
-	beq	63f
-53:
-#if !defined(CONFIG_8xx)
-	dcbz	r11,r6
-#endif
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	53b
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	blr
-
-_GLOBAL(memmove)
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-_GLOBAL(memcpy)
-	srwi.	r7,r5,3
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(backwards_memcpy)
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(memcmp)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
-2:	li	r3,0
-	blr
-
-_GLOBAL(memchr)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r3,r3,-1
-1:	lbzu	r0,1(r3)
-	cmpw	0,r0,r4
-	bdnzf	2,1b
-	beqlr
-2:	li	r3,0
-	blr
-
-_GLOBAL(__copy_tofrom_user)
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-71:	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	subf	r5,r0,r5
-	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-73:	stwu	r9,4(r6)
-	bdnz	72b
-
-	.section __ex_table,"a"
-	.align	2
-	.long	70b,100f
-	.long	71b,101f
-	.long	72b,102f
-	.long	73b,103f
-	.text
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	beq	63f
-
-#ifdef CONFIG_8xx
-	/* Don't use prefetch on 8xx */
-	mtctr	r0
-	li	r0,0
-53:	COPY_16_BYTES_WITHEX(0)
-	bdnz	53b
-
-#else /* not CONFIG_8xx */
-	/* Here we decide how far ahead to prefetch the source */
-	li	r3,4
-	cmpwi	r0,1
-	li	r7,0
-	ble	114f
-	li	r7,1
-#if MAX_COPY_PREFETCH > 1
-	/* Heuristically, for large transfers we prefetch
-	   MAX_COPY_PREFETCH cachelines ahead.  For small transfers
-	   we prefetch 1 cacheline ahead. */
-	cmpwi	r0,MAX_COPY_PREFETCH
-	ble	112f
-	li	r7,MAX_COPY_PREFETCH
-112:	mtctr	r7
-111:	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-	bdnz	111b
-#else
-	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-#endif /* MAX_COPY_PREFETCH > 1 */
-
-114:	subf	r8,r7,r0
-	mr	r0,r7
-	mtctr	r8
-
-53:	dcbt	r3,r4
-54:	dcbz	r11,r6
-	.section __ex_table,"a"
-	.align	2
-	.long	54b,105f
-	.text
-/* the main body of the cacheline loop */
-	COPY_16_BYTES_WITHEX(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_WITHEX(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_WITHEX(2)
-	COPY_16_BYTES_WITHEX(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_WITHEX(4)
-	COPY_16_BYTES_WITHEX(5)
-	COPY_16_BYTES_WITHEX(6)
-	COPY_16_BYTES_WITHEX(7)
-#endif
-#endif
-#endif
-	bdnz	53b
-	cmpwi	r0,0
-	li	r3,4
-	li	r7,0
-	bne	114b
-#endif /* CONFIG_8xx */
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-31:	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-41:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	li	r3,0
-	blr
-
-/* read fault, initial single-byte copy */
-100:	li	r9,0
-	b	90f
-/* write fault, initial single-byte copy */
-101:	li	r9,1
-90:	subf	r5,r8,r5
-	li	r3,0
-	b	99f
-/* read fault, initial word copy */
-102:	li	r9,0
-	b	91f
-/* write fault, initial word copy */
-103:	li	r9,1
-91:	li	r3,2
-	b	99f
-
-/*
- * this stuff handles faults in the cacheline loop and branches to either
- * 104f (if in read part) or 105f (if in write part), after updating r5
- */
-	COPY_16_BYTES_EXCODE(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_EXCODE(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_EXCODE(2)
-	COPY_16_BYTES_EXCODE(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_EXCODE(4)
-	COPY_16_BYTES_EXCODE(5)
-	COPY_16_BYTES_EXCODE(6)
-	COPY_16_BYTES_EXCODE(7)
-#endif
-#endif
-#endif
-
-/* read fault in cacheline loop */
-104:	li	r9,0
-	b	92f
-/* fault on dcbz (effectively a write fault) */
-/* or write fault in cacheline loop */
-105:	li	r9,1
-92:	li	r3,LG_CACHELINE_BYTES
-	mfctr	r8
-	add	r0,r0,r8
-	b	106f
-/* read fault in final word loop */
-108:	li	r9,0
-	b	93f
-/* write fault in final word loop */
-109:	li	r9,1
-93:	andi.	r5,r5,3
-	li	r3,2
-	b	99f
-/* read fault in final byte loop */
-110:	li	r9,0
-	b	94f
-/* write fault in final byte loop */
-111:	li	r9,1
-94:	li	r5,0
-	li	r3,0
-/*
- * At this stage the number of bytes not copied is
- * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
- */
-99:	mfctr	r0
-106:	slw	r3,r0,r3
-	add.	r3,r3,r5
-	beq	120f			/* shouldn't happen */
-	cmpwi	0,r9,0
-	bne	120f
-/* for a read fault, first try to continue the copy one byte at a time */
-	mtctr	r3
-130:	lbz	r0,4(r4)
-131:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	130b
-/* then clear out the destination: r3 bytes starting at 4(r6) */
-132:	mfctr	r3
-	srwi.	r0,r3,2
-	li	r9,0
-	mtctr	r0
-	beq	113f
-112:	stwu	r9,4(r6)
-	bdnz	112b
-113:	andi.	r0,r3,3
-	mtctr	r0
-	beq	120f
-114:	stb	r9,4(r6)
-	addi	r6,r6,1
-	bdnz	114b
-120:	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	30b,108b
-	.long	31b,109b
-	.long	40b,110b
-	.long	41b,111b
-	.long	130b,132b
-	.long	131b,120b
-	.long	112b,120b
-	.long	114b,120b
-	.text
-
-_GLOBAL(__clear_user)
-	addi	r6,r3,-4
-	li	r3,0
-	li	r5,0
-	cmplwi	0,r4,4
-	blt	7f
-	/* clear a single word */
-11:	stwu	r5,4(r6)
-	beqlr
-	/* clear word sized chunks */
-	andi.	r0,r6,3
-	add	r4,r0,r4
-	subf	r6,r0,r6
-	srwi	r0,r4,2
-	andi.	r4,r4,3
-	mtctr	r0
-	bdz	7f
-1:	stwu	r5,4(r6)
-	bdnz	1b
-	/* clear byte sized chunks */
-7:	cmpwi	0,r4,0
-	beqlr
-	mtctr	r4
-	addi	r6,r6,3
-8:	stbu	r5,1(r6)
-	bdnz	8b
-	blr
-90:	mr	r3,r4
-	blr
-91:	mfctr	r3
-	slwi	r3,r3,2
-	add	r3,r3,r4
-	blr
-92:	mfctr	r3
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	11b,90b
-	.long	1b,91b
-	.long	8b,92b
-	.text
-
-_GLOBAL(__strncpy_from_user)
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-	cmpwi	0,r5,0
-	beq	2f
-	mtctr	r5
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	beq	3f
-2:	addi	r6,r6,1
-3:	subf	r3,r3,r6
-	blr
-99:	li	r3,-EFAULT
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
-	.text
-
-/* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
-_GLOBAL(__strnlen_user)
-	addi	r7,r3,-1
-	subf	r6,r7,r5	/* top+1 - str */
-	cmplw	0,r4,r6
-	bge	0f
-	mr	r6,r4
-0:	mtctr	r6		/* ctr = min(len, top - str) */
-1:	lbzu	r0,1(r7)	/* get next byte */
-	cmpwi	0,r0,0
-	bdnzf	2,1b		/* loop if --ctr != 0 && byte != 0 */
-	addi	r7,r7,1
-	subf	r3,r3,r7	/* number of bytes we have looked at */
-	beqlr			/* return if we found a 0 byte */
-	cmpw	0,r3,r4		/* did we look at all len bytes? */
-	blt	99f		/* if not, must have hit top */
-	addi	r3,r4,1		/* return len + 1 to indicate no null found */
-	blr
-99:	li	r3,0		/* bad address, return 0 */
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
deleted file mode 100644
index fbb577a0d165..000000000000
--- a/arch/ppc/mm/44x_mmu.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Modifications by Matt Porter (mporter@mvista.com) to support
- * PPC44x Book E processors.
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include "mmu_decl.h"
-
-extern char etext[], _stext[];
-
-/* Used by the 44x TLB replacement exception handler.
- * Just needed it declared someplace.
- */
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
-int icache_44x_need_flush;
-
-/*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
- */
-static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
-{
-	__asm__ __volatile__(
-		"tlbwe	%2,%3,%4\n"
-		"tlbwe	%1,%3,%5\n"
-		"tlbwe	%0,%3,%6\n"
-	:
-	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-	  "r" (phys),
-	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
-	  "i" (PPC44x_TLB_PAGEID),
-	  "i" (PPC44x_TLB_XLAT),
-	  "i" (PPC44x_TLB_ATTRIB));
-}
-
-void __init MMU_init_hw(void)
-{
-	flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long addr;
-
-	/* Pin in enough TLBs to cover any lowmem not covered by the
-	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
-
-	return total_lowmem;
-}
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
deleted file mode 100644
index ea785dbaac7c..000000000000
--- a/arch/ppc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	/*
-	 * The Zone Protection Register (ZPR) defines how protection will
-	 * be applied to every page which is a member of a given zone. At
-	 * present, we utilize only two of the 4xx's zones.
-	 * The zone index bits (of ZSEL) in the PTE are used for software
-	 * indicators, except the LSB.  For user access, zone 1 is used,
-	 * for kernel access, zone 0 is used.  We set all but zone 1
-	 * to zero, allowing only kernel access as indicated in the PTE.
-	 * For zone 1, we set a 01 binary (a value of 10 will not work)
-	 * to allow user access as indicated in the PTE.  This also allows
-	 * kernel access as indicated in the PTE.
-	 */
-
-        mtspr(SPRN_ZPR, 0x10000000);
-
-	flush_instruction_cache();
-
-	/*
-	 * Set up the real-mode cache parameters for the exception vector
-	 * handlers (which are run in real-mode).
-	 */
-
-        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
-
-        /*
-	 * Cache instruction and data space where the exception
-	 * vectors and the kernel live in real-mode.
-	 */
-
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M	(1<<24)
-#define LARGE_PAGE_SIZE_4M	(1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long v, s;
-	phys_addr_t p;
-
-	v = KERNELBASE;
-	p = PPC_MEMSTART;
-	s = total_lowmem;
-
-	if (__map_without_ltlbs)
-		return 0;
-
-	while (s >= LARGE_PAGE_SIZE_16M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-
-		v += LARGE_PAGE_SIZE_16M;
-		p += LARGE_PAGE_SIZE_16M;
-		s -= LARGE_PAGE_SIZE_16M;
-	}
-
-	while (s >= LARGE_PAGE_SIZE_4M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp) = val;
-
-		v += LARGE_PAGE_SIZE_4M;
-		p += LARGE_PAGE_SIZE_4M;
-		s -= LARGE_PAGE_SIZE_4M;
-	}
-
-	return total_lowmem - s;
-}
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
deleted file mode 100644
index 691ba2bae05d..000000000000
--- a/arch/ppc/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of the memory manager.
-#
-
-obj-y				:= fault.o init.o mem_pieces.o \
-					mmu_context.o pgtable.o
-
-obj-$(CONFIG_PPC_STD_MMU)	+= hashtable.o ppc_mmu.o tlb.o
-obj-$(CONFIG_40x)		+= 4xx_mmu.o
-obj-$(CONFIG_44x)		+= 44x_mmu.o
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
deleted file mode 100644
index 36c0e7529edb..000000000000
--- a/arch/ppc/mm/fault.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/i386/mm/fault.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  Modified by Cort Dougan and Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/tlbflush.h>
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-extern void (*debugger)(struct pt_regs *);
-extern void (*debugger_fault_handler)(struct pt_regs *);
-extern int (*debugger_dabr_match)(struct pt_regs *);
-int debugger_kernel_faults = 1;
-#endif
-
-unsigned long htab_reloads;	/* updated by hashtable.S:hash_page() */
-unsigned long htab_evicts; 	/* updated by hashtable.S:hash_page() */
-unsigned long htab_preloads;	/* updated by hashtable.S:add_hash_page() */
-unsigned long pte_misses;	/* updated by do_page_fault() */
-unsigned long pte_errors;	/* updated by do_page_fault() */
-unsigned int probingmem;
-
-/*
- * Check whether the instruction at regs->nip is a store using
- * an update addressing form which will update r1.
- */
-static int store_updates_sp(struct pt_regs *regs)
-{
-	unsigned int inst;
-
-	if (get_user(inst, (unsigned int __user *)regs->nip))
-		return 0;
-	/* check for 1 in the rA field */
-	if (((inst >> 16) & 0x1f) != 1)
-		return 0;
-	/* check major opcode */
-	switch (inst >> 26) {
-	case 37:	/* stwu */
-	case 39:	/* stbu */
-	case 45:	/* sthu */
-	case 53:	/* stfsu */
-	case 55:	/* stfdu */
-		return 1;
-	case 31:
-		/* check minor opcode */
-		switch ((inst >> 1) & 0x3ff) {
-		case 183:	/* stwux */
-		case 247:	/* stbux */
-		case 439:	/* sthux */
-		case 695:	/* stfsux */
-		case 759:	/* stfdux */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * For 600- and 800-family processors, the error_code parameter is DSISR
- * for a data fault, SRR1 for an instruction fault. For 400-family processors
- * the error_code parameter is ESR for a data fault, 0 for an instruction
- * fault.
- */
-int do_page_fault(struct pt_regs *regs, unsigned long address,
-		  unsigned long error_code)
-{
-	struct vm_area_struct * vma;
-	struct mm_struct *mm = current->mm;
-	siginfo_t info;
-	int code = SEGV_MAPERR;
-	int fault;
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	int is_write = error_code & ESR_DST;
-#else
-	int is_write = 0;
-
-	/*
-	 * Fortunately the bit assignments in SRR1 for an instruction
-	 * fault and DSISR for a data fault are mostly the same for the
-	 * bits we are interested in.  But there are some bits which
-	 * indicate errors in DSISR but can validly be set in SRR1.
-	 */
-	if (TRAP(regs) == 0x400)
-		error_code &= 0x48200000;
-	else
-		is_write = error_code & 0x02000000;
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_fault_handler && TRAP(regs) == 0x300) {
-		debugger_fault_handler(regs);
-		return 0;
-	}
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	if (error_code & 0x00400000) {
-		/* DABR match */
-		if (debugger_dabr_match(regs))
-			return 0;
-	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-#endif /* CONFIG_XMON || CONFIG_KGDB */
-
-	if (in_atomic() || mm == NULL)
-		return SIGSEGV;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (!is_write)
-                goto bad_area;
-
-	/*
-	 * N.B. The rs6000/xcoff ABI allows programs to access up to
-	 * a few hundred bytes below the stack pointer.
-	 * The kernel signal delivery code writes up to about 1.5kB
-	 * below the stack pointer (r1) before decrementing it.
-	 * The exec code can write slightly over 640kB to the stack
-	 * before setting the user r1.  Thus we allow the stack to
-	 * expand to 1MB without further checks.
-	 */
-	if (address + 0x100000 < vma->vm_end) {
-		/* get user regs even if this fault is in kernel mode */
-		struct pt_regs *uregs = current->thread.regs;
-		if (uregs == NULL)
-			goto bad_area;
-
-		/*
-		 * A user-mode access to an address a long way below
-		 * the stack pointer is only valid if the instruction
-		 * is one which would update the stack pointer to the
-		 * address accessed if the instruction completed,
-		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
-		 * (or the byte, halfword, float or double forms).
-		 *
-		 * If we don't check this then any write to the area
-		 * between the last mapped region and the stack will
-		 * expand the stack rather than segfaulting.
-		 */
-		if (address + 2048 < uregs->gpr[1]
-		    && (!user_mode(regs) || !store_updates_sp(regs)))
-			goto bad_area;
-	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-good_area:
-	code = SEGV_ACCERR;
-#if defined(CONFIG_6xx)
-	if (error_code & 0x95700000)
-		/* an error such as lwarx to I/O controller space,
-		   address matching DABR, eciwx, etc. */
-		goto bad_area;
-#endif /* CONFIG_6xx */
-#if defined(CONFIG_8xx)
-        /* The MPC8xx seems to always set 0x80000000, which is
-         * "undefined".  Of those that can be set, this is the only
-         * one which seems bad.
-         */
-	if (error_code & 0x10000000)
-                /* Guarded storage error. */
-		goto bad_area;
-#endif /* CONFIG_8xx */
-
-	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* an exec  - 4xx/Book-E allows for per-page execute permission */
-	} else if (TRAP(regs) == 0x400) {
-		pte_t *ptep;
-		pmd_t *pmdp;
-
-#if 0
-		/* It would be nice to actually enforce the VM execute
-		   permission on CPUs which can do so, but far too
-		   much stuff in userspace doesn't get the permissions
-		   right, so we let any page be executed for now. */
-		if (! (vma->vm_flags & VM_EXEC))
-			goto bad_area;
-#endif
-
-		/* Since 4xx/Book-E supports per-page execute permission,
-		 * we lazily flush dcache to icache. */
-		ptep = NULL;
-		if (get_pteptr(mm, address, &ptep, &pmdp)) {
-			spinlock_t *ptl = pte_lockptr(mm, pmdp);
-			spin_lock(ptl);
-			if (pte_present(*ptep)) {
-				struct page *page = pte_page(*ptep);
-
-				if (!test_bit(PG_arch_1, &page->flags)) {
-					flush_dcache_icache_page(page);
-					set_bit(PG_arch_1, &page->flags);
-				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address, mm->context.id);
-				pte_unmap_unlock(ptep, ptl);
-				up_read(&mm->mmap_sem);
-				return 0;
-			}
-			pte_unmap_unlock(ptep, ptl);
-		}
-#endif
-	/* a read */
-	} else {
-		/* protection fault */
-		if (error_code & 0x08000000)
-			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
- survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-
-	up_read(&mm->mmap_sem);
-	/*
-	 * keep track of tlb+htab misses that are good addrs but
-	 * just need pte's created via handle_mm_fault()
-	 * -- Cort
-	 */
-	pte_misses++;
-	return 0;
-
-bad_area:
-	up_read(&mm->mmap_sem);
-	pte_errors++;
-
-	/* User mode accesses cause a SIGSEGV */
-	if (user_mode(regs)) {
-		_exception(SIGSEGV, regs, code, address);
-		return 0;
-	}
-
-	return SIGSEGV;
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *)address;
-	force_sig_info (SIGBUS, &info, current);
-	if (!user_mode(regs))
-		return SIGBUS;
-	return 0;
-}
-
-/*
- * bad_page_fault is called when we have a bad access from the kernel.
- * It is called from the DSI and ISI handlers in head.S and from some
- * of the procedures in traps.c.
- */
-void
-bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
-{
-	const struct exception_table_entry *entry;
-
-	/* Are we prepared to handle this fault?  */
-	if ((entry = search_exception_tables(regs->nip)) != NULL) {
-		regs->nip = entry->fixup;
-		return;
-	}
-
-	/* kernel has accessed a bad area */
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_kernel_faults)
-		debugger(regs);
-#endif
-	die("kernel access of bad area", regs, sig);
-}
-
-#ifdef CONFIG_8xx
-
-/* The pgtable.h claims some functions generically exist, but I
- * can't find them......
- */
-pte_t *va_to_pte(unsigned long address)
-{
-	pgd_t *dir;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	if (address < TASK_SIZE)
-		return NULL;
-
-	dir = pgd_offset(&init_mm, address);
-	if (dir) {
-		pmd = pmd_offset(dir, address & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, address & PAGE_MASK);
-			if (pte && pte_present(*pte))
-				return(pte);
-		}
-	}
-	return NULL;
-}
-
-unsigned long va_to_phys(unsigned long address)
-{
-	pte_t *pte;
-
-	pte = va_to_pte(address);
-	if (pte)
-		return(((unsigned long)(pte_val(*pte)) & PAGE_MASK) | (address & ~(PAGE_MASK)));
-	return (0);
-}
-
-void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-
-        printk(" pte @ 0x%8lx: ", addr);
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-                                printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n",
-                                        (long)pgd, (long)pte, (long)pte_val(*pte));
-#define pp ((long)pte_val(*pte))			
-				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx "
-				       "CI: %lx v: %lx\n",
-				       pp>>12,    /* rpn */
-				       (pp>>10)&3, /* pp */
-				       (pp>>3)&1, /* small */
-				       (pp>>2)&1, /* shared */
-				       (pp>>1)&1, /* cache inhibit */
-				       pp&1       /* valid */
-				       );
-#undef pp			
-                        }
-                        else {
-                                printk("no pte\n");
-                        }
-                }
-                else {
-                        printk("no pmd\n");
-                }
-        }
-        else {
-                printk("no pgd\n");
-        }
-}
-
-int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = (int)pte_val(*pte);
-                        }
-                }
-        }
-        return(retval);
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
deleted file mode 100644
index 5f364dc50154..000000000000
--- a/arch/ppc/mm/hashtable.S
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  This file contains low-level assembler routines for managing
- *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
- *  hash table, so this file is not used on them.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_SMP
-	.section .bss
-	.align	2
-	.globl mmu_hash_lock
-mmu_hash_lock:
-	.space	4
-#endif /* CONFIG_SMP */
-
-/*
- * Sync CPUs with hash_page taking & releasing the hash
- * table lock
- */
-#ifdef CONFIG_SMP
-	.text
-_GLOBAL(hash_page_sync)
-	lis	r8,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-	eieio
-	li	r0,0
-	stw	r0,0(r8)
-	blr	
-#endif
-
-/*
- * Load a PTE into the hash table, if possible.
- * The address is in r4, and r3 contains an access flag:
- * _PAGE_RW (0x400) if a write.
- * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
- *
- * Returns to the caller if the access is illegal or there is no
- * mapping for the address.  Otherwise it places an appropriate PTE
- * in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
- */
-	.text
-_GLOBAL(hash_page)
-	tophys(r7,0)			/* gets -KERNELBASE into r7 */
-#ifdef CONFIG_SMP
-	addis	r8,r7,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-#endif
-	/* Get PTE (linux-style) and check access */
-	lis	r0,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
-	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
-	lwz	r5,PGDIR(r8)		/* virt page-table root */
-	blt+	112f			/* assume user more likely */
-	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
-	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
-112:	add	r5,r5,r7		/* convert to phys addr */
-	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
-	lwz	r8,0(r5)		/* get pmd entry */
-	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
-#ifdef CONFIG_SMP
-	beq-	hash_page_out		/* return if no mapping */
-#else
-	/* XXX it seems like the 601 will give a machine fault on the
-	   rfi if its alignment is wrong (bottom 4 bits of address are
-	   8 or 0xc) and we have had a not-taken conditional branch
-	   to the address following the rfi. */
-	beqlr-
-#endif
-	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
-	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
-	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
-
-	/*
-	 * Update the linux PTE atomically.  We do the lwarx up-front
-	 * because almost always, there won't be a permission violation
-	 * and there won't already be an HPTE, and thus we will have
-	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
-	 */
-retry:
-	lwarx	r6,0,r8			/* get linux-style pte */
-	andc.	r5,r3,r6		/* check access & ~permission */
-#ifdef CONFIG_SMP
-	bne-	hash_page_out		/* return if access not permitted */
-#else
-	bnelr-
-#endif
-	or	r5,r0,r6		/* set accessed/dirty bits */
-	stwcx.	r5,0,r8			/* attempt to update PTE */
-	bne-	retry			/* retry if someone got there first */
-
-	mfsrin	r3,r4			/* get segment reg for segment */
-	mfctr	r0
-	stw	r0,_CTR(r11)
-	bl	create_hpte		/* add the hash table entry */
-
-/*
- * htab_reloads counts the number of times we have to fault an
- * HPTE into the hash table.  This should only happen after a
- * fork (because fork does a flush_tlb_mm) or a vmalloc or ioremap.
- * Where a page is faulted into a process's address space,
- * update_mmu_cache gets called to put the HPTE into the hash table
- * and those are counted as preloads rather than reloads.
- */
-	addis	r8,r7,htab_reloads@ha
-	lwz	r3,htab_reloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_reloads@l(r8)
-
-#ifdef CONFIG_SMP
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-#endif
-
-	/* Return from the exception */
-	lwz	r5,_CTR(r11)
-	mtctr	r5
-	lwz	r0,GPR0(r11)
-	lwz	r7,GPR7(r11)
-	lwz	r8,GPR8(r11)
-	b	fast_exception_return
-
-#ifdef CONFIG_SMP
-hash_page_out:
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-	blr
-#endif /* CONFIG_SMP */
-
-/*
- * Add an entry for a particular page to the hash table.
- *
- * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
- *
- * We assume any necessary modifications to the pte (e.g. setting
- * the accessed bit) have already been done and that there is actually
- * a hash table in use (i.e. we're not on a 603).
- */
-_GLOBAL(add_hash_page)
-	mflr	r0
-	stw	r0,4(r1)
-
-	/* Convert context and va to VSID */
-	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
-
-#ifdef CONFIG_SMP
-	rlwinm	r8,r1,0,0,18		/* use cpu number to make tag */
-	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
-	oris	r8,r8,12
-#endif /* CONFIG_SMP */
-
-	/*
-	 * We disable interrupts here, even on UP, because we don't
-	 * want to race with hash_page, and because we want the
-	 * _PAGE_HASHPTE bit to be a reliable indication of whether
-	 * the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	tophys(r7,0)
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
-	 * If _PAGE_HASHPTE was already set, we don't replace the existing
-	 * HPTE, so we just unlock and return.
-	 */
-	mr	r8,r5
-	rlwimi	r8,r4,22,20,29
-1:	lwarx	r6,0,r8
-	andi.	r0,r6,_PAGE_HASHPTE
-	bne	9f			/* if HASHPTE already set, done */
-	ori	r5,r6,_PAGE_HASHPTE
-	stwcx.	r5,0,r8
-	bne-	1b
-
-	bl	create_hpte
-
-	addis	r8,r7,htab_preloads@ha
-	lwz	r3,htab_preloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_preloads@l(r8)
-
-9:
-#ifdef CONFIG_SMP
-	eieio
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-	/* reenable interrupts and DR */
-	mtmsr	r10
-	SYNC_601
-	isync
-
-	lwz	r0,4(r1)
-	mtlr	r0
-	blr
-
-/*
- * This routine adds a hardware PTE to the hash table.
- * It is designed to be called with the MMU either on or off.
- * r3 contains the VSID, r4 contains the virtual address,
- * r5 contains the linux PTE, r6 contains the old value of the
- * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
- * offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
- * On SMP, the caller should have the mmu_hash_lock held.
- * We assume that the caller has (or will) set the _PAGE_HASHPTE
- * bit in the linux PTE in memory.  The value passed in r6 should
- * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
- * this routine will skip the search for an existing HPTE.
- * This procedure modifies r0, r3 - r6, r8, cr0.
- *  -- paulus.
- *
- * For speed, 4 of the instructions get patched once the size and
- * physical address of the hash table are known.  These definitions
- * of Hash_base and Hash_bits below are just an example.
- */
-Hash_base = 0xc0180000
-Hash_bits = 12				/* e.g. 256kB hash table */
-Hash_msk = (((1 << Hash_bits) - 1) * 64)
-
-/* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE	8
-#define PTEG_SIZE	64
-#define LG_PTEG_SIZE	6
-#define LDPTEu		lwzu
-#define STPTE		stw
-#define CMPPTE		cmpw
-#define PTE_H		0x40
-#define PTE_V		0x80000000
-#define TST_V(r)	rlwinm. r,r,0,0,0
-#define SET_V(r)	oris r,r,PTE_V@h
-#define CLR_V(r,t)	rlwinm r,r,0,1,31
-
-#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
-#define HASH_RIGHT	31-LG_PTEG_SIZE
-
-_GLOBAL(create_hpte)
-	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
-	rlwinm	r8,r5,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r0,r5,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r8,r8,r0		/* writable if _RW & _DIRTY */
-	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r8,r8,0xe14		/* clear out reserved bits and M */
-	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
-BEGIN_FTR_SECTION
-	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
-
-	/* Construct the high word of the PPC-style PTE (r5) */
-	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r5)			/* set V (valid) bit */
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(hash_page_patch_A)
-	addis	r0,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r3,r3,r0		/* make primary hash */
-	li	r0,8			/* PTEs/group */
-
-	/*
-	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
-	 * if it is clear, meaning that the HPTE isn't there already...
-	 */
-	andi.	r6,r6,_PAGE_HASHPTE
-	beq+	10f			/* no PTE: go look for an empty slot */
-	tlbie	r4
-
-	addis	r4,r7,htab_hash_searches@ha
-	lwz	r6,htab_hash_searches@l(r4)
-	addi	r6,r6,1			/* count how many searches we do */
-	stw	r6,htab_hash_searches@l(r4)
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	mtctr	r0
-	addi	r4,r3,-PTE_SIZE
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	CMPPTE	0,r6,r5
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_slot
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_B)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	CMPPTE	0,r6,r5
-	bdnzf	2,2b
-	beq+	found_slot
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/* Search the primary PTEG for an empty slot */
-10:	mtctr	r0
-	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	TST_V(r6)			/* test valid bit */
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_empty
-
-	/* update counter of times that the primary PTEG is full */
-	addis	r4,r7,primary_pteg_full@ha
-	lwz	r6,primary_pteg_full@l(r4)
-	addi	r6,r6,1
-	stw	r6,primary_pteg_full@l(r4)
-
-	/* Search the secondary PTEG for an empty slot */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_C)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	TST_V(r6)
-	bdnzf	2,2b
-	beq+	found_empty
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/*
-	 * Choose an arbitrary slot in the primary PTEG to overwrite.
-	 * Since both the primary and secondary PTEGs are full, and we
-	 * have no information that the PTEs in the primary PTEG are
-	 * more important or useful than those in the secondary PTEG,
-	 * and we know there is a definite (although small) speed
-	 * advantage to putting the PTE in the primary PTEG, we always
-	 * put the PTE in the primary PTEG.
-	 */
-	addis	r4,r7,next_slot@ha
-	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE
-	andi.	r6,r6,7*PTE_SIZE
-	stw	r6,next_slot@l(r4)
-	add	r4,r3,r6
-
-	/* update counter of evicted pages */
-	addis	r6,r7,htab_evicts@ha
-	lwz	r3,htab_evicts@l(r6)
-	addi	r3,r3,1
-	stw	r3,htab_evicts@l(r6)
-
-#ifndef CONFIG_SMP
-	/* Store PTE in PTEG */
-found_empty:
-	STPTE	r5,0(r4)
-found_slot:
-	STPTE	r8,PTE_SIZE/2(r4)
-
-#else /* CONFIG_SMP */
-/*
- * Between the tlbie above and updating the hash table entry below,
- * another CPU could read the hash table entry and put it in its TLB.
- * There are 3 cases:
- * 1. using an empty slot
- * 2. updating an earlier entry to change permissions (i.e. enable write)
- * 3. taking over the PTE for an unrelated address
- *
- * In each case it doesn't really matter if the other CPUs have the old
- * PTE in their TLB.  So we don't need to bother with another tlbie here,
- * which is convenient as we've overwritten the register that had the
- * address. :-)  The tlbie above is mainly to make sure that this CPU comes
- * and gets the new PTE from the hash table.
- *
- * We do however have to make sure that the PTE is never in an invalid
- * state with the V bit set.
- */
-found_empty:
-found_slot:
-	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
-	STPTE	r5,0(r4)
-	sync
-	TLBSYNC
-	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
-	sync
-	SET_V(r5)
-	STPTE	r5,0(r4)	/* finally set V bit in PTE */
-#endif /* CONFIG_SMP */
-
-	sync		/* make sure pte updates get to memory */
-	blr
-
-	.section .bss
-	.align	2
-next_slot:
-	.space	4
-	.globl primary_pteg_full
-primary_pteg_full:
-	.space	4
-	.globl htab_hash_searches
-htab_hash_searches:
-	.space	4
-	.previous
-
-/*
- * Flush the entry for a particular page from the hash table.
- *
- * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
- *		    int count)
- *
- * We assume that there is a hash table in use (Hash != 0).
- */
-_GLOBAL(flush_hash_pages)
-	tophys(r7,0)
-
-	/*
-	 * We disable interrupts here, even on UP, because we want
-	 * the _PAGE_HASHPTE bit to be a reliable indication of
-	 * whether the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	/* First find a PTE in the range that has _PAGE_HASHPTE set */
-	rlwimi	r5,r4,22,20,29
-1:	lwz	r0,0(r5)
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	2f
-	ble	cr1,19f
-	addi	r4,r4,0x1000
-	addi	r5,r5,4
-	addi	r6,r6,-1
-	b	1b
-
-	/* Convert context and va to VSID */
-2:	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note code below trims to 24 bits */
-
-	/* Construct the high word of the PPC-style PTE (r11) */
-	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r11)			/* set V (valid) bit */
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-	rlwinm	r8,r1,0,0,18
-	add	r8,r8,r7
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,9
-10:	lwarx	r0,0,r9
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
-	 * already clear, we're done (for this pte).  If not,
-	 * clear it (atomically) and proceed.  -- paulus.
-	 */
-33:	lwarx	r8,0,r5			/* fetch the pte */
-	andi.	r0,r8,_PAGE_HASHPTE
-	beq	8f			/* done if HASHPTE is already clear */
-	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
-	stwcx.	r8,0,r5			/* update the pte */
-	bne-	33b
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(flush_hash_patch_A)
-	addis	r8,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r8,r0,r8		/* make primary hash */
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	li	r0,8			/* PTEs/group */
-	mtctr	r0
-	addi	r12,r8,-PTE_SIZE
-1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
-	CMPPTE	0,r0,r11
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	3f
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
-	li	r0,8			/* PTEs/group */
-_GLOBAL(flush_hash_patch_B)
-	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
-	xori	r12,r12,(-PTEG_SIZE & 0xffff)
-	addi	r12,r12,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r0,PTE_SIZE(r12)
-	CMPPTE	0,r0,r11
-	bdnzf	2,2b
-	xori	r11,r11,PTE_H		/* clear H again */
-	bne-	4f			/* should rarely fail to find it */
-
-3:	li	r0,0
-	STPTE	r0,0(r12)		/* invalidate entry */
-4:	sync
-	tlbie	r4			/* in hw tlb too */
-	sync
-
-8:	ble	cr1,9f			/* if all ptes checked */
-81:	addi	r6,r6,-1
-	addi	r5,r5,4			/* advance to next pte */
-	addi	r4,r4,0x1000
-	lwz	r0,0(r5)		/* check next pte */
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	33b
-	bgt	cr1,81b
-
-9:
-#ifdef CONFIG_SMP
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-19:	mtmsr	r10
-	SYNC_601
-	isync
-	blr
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
deleted file mode 100644
index 1a63711081b5..000000000000
--- a/arch/ppc/mm/init.c
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/btext.h>
-#include <asm/tlb.h>
-#include <asm/bootinfo.h>
-
-#include "mem_pieces.h"
-#include "mmu_decl.h"
-
-#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
-#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
-#endif
-#endif
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-unsigned long total_memory;
-unsigned long total_lowmem;
-
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
-
-int mem_init_done;
-int init_bootmem_done;
-int boot_mapsize;
-
-extern char _end[];
-extern char etext[], _stext[];
-extern char __init_begin, __init_end;
-
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-EXPORT_SYMBOL(kmap_prot);
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
-void MMU_init(void);
-void set_phys_avail(unsigned long total_ram);
-
-/* XXX should be in current.h  -- paulus */
-extern struct task_struct *current_set[NR_CPUS];
-
-char *klimit = _end;
-struct mem_pieces phys_avail;
-
-/*
- * this tells the system to map all of ram with the segregs
- * (i.e. page tables) instead of the bats.
- * -- Cort
- */
-int __map_without_bats;
-int __map_without_ltlbs;
-
-/* max amount of RAM to use */
-unsigned long __max_memory;
-/* max amount of low RAM to map in */
-unsigned long __max_low_memory = MAX_LOW_MEM;
-
-void show_mem(void)
-{
-	int i,free = 0,total = 0,reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageHighMem(mem_map+i))
-			highmem++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
-/* Free up now-unused memory */
-static void free_sec(unsigned long start, unsigned long end, const char *name)
-{
-	unsigned long cnt = 0;
-
-	while (start < end) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		cnt++;
-		start += PAGE_SIZE;
- 	}
-	if (cnt) {
-		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
-		totalram_pages += cnt;
-	}
-}
-
-void free_initmem(void)
-{
-#define FREESEC(TYPE) \
-	free_sec((unsigned long)(&__ ## TYPE ## _begin), \
-		 (unsigned long)(&__ ## TYPE ## _end), \
-		 #TYPE);
-
-	printk ("Freeing unused kernel memory:");
-	FREESEC(init);
- 	printk("\n");
-	ppc_md.progress = NULL;
-#undef FREESEC
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-	}
-}
-#endif
-
-/*
- * Check for command-line options that affect what MMU_init will do.
- */
-void MMU_setup(void)
-{
-	/* Check for nobats option (used in mapin_ram). */
-	if (strstr(cmd_line, "nobats")) {
-		__map_without_bats = 1;
-	}
-
-	if (strstr(cmd_line, "noltlbs")) {
-		__map_without_ltlbs = 1;
-	}
-
-	/* Look for mem= option on command line */
-	if (strstr(cmd_line, "mem=")) {
-		char *p, *q;
-		unsigned long maxmem = 0;
-
-		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
-			q = p + 4;
-			if (p > cmd_line && p[-1] != ' ')
-				continue;
-			maxmem = simple_strtoul(q, &q, 0);
-			if (*q == 'k' || *q == 'K') {
-				maxmem <<= 10;
-				++q;
-			} else if (*q == 'm' || *q == 'M') {
-				maxmem <<= 20;
-				++q;
-			}
-		}
-		__max_memory = maxmem;
-	}
-}
-
-/*
- * MMU_init sets up the basic memory mappings for the kernel,
- * including both RAM and possibly some I/O regions,
- * and sets up the page tables and the MMU hardware ready to go.
- */
-void __init MMU_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:enter", 0x111);
-
-	/* parse args from command line */
-	MMU_setup();
-
-	/*
-	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.  If we were
-	 * passed the total memory size from the bootloader,
-	 * just use it.
-	 */
-	if (boot_mem_size)
-		total_memory = boot_mem_size;
-	else
-		total_memory = ppc_md.find_end_of_memory();
-
-	if (__max_memory && total_memory > __max_memory)
-		total_memory = __max_memory;
-	total_lowmem = total_memory;
-	if (total_lowmem > __max_low_memory) {
-		total_lowmem = __max_low_memory;
-#ifndef CONFIG_HIGHMEM
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-	set_phys_avail(total_lowmem);
-
-	/* Initialize the MMU hardware */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:hw init", 0x300);
-	MMU_init_hw();
-
-	/* Map in all of RAM starting at KERNELBASE */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:mapin", 0x301);
-	mapin_ram();
-
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
-
-	/* Map in I/O resources */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:setio", 0x302);
-	if (ppc_md.setup_io_mappings)
-		ppc_md.setup_io_mappings();
-
-	/* Initialize the context management stuff */
-	mmu_context_init();
-
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:exit", 0x211);
-
-#ifdef CONFIG_BOOTX_TEXT
-	/* By default, we are no longer mapped */
-       	boot_text_mapped = 0;
-	/* Must be done last, or ppc_md.progress will die. */
-	map_boot_text();
-#endif
-}
-
-/* This is only called until mem_init is done. */
-void __init *early_get_page(void)
-{
-	void *p;
-
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
-	}
-	return p;
-}
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-void __init do_init_bootmem(void)
-{
-	unsigned long start, size;
-	int i;
-
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	start = 0;
-	size = 0;
-	for (i = 0; i < phys_avail.n_regions; ++i) {
-		unsigned long a = phys_avail.regions[i].address;
-		unsigned long s = phys_avail.regions[i].size;
-		if (s <= size)
-			continue;
-		start = a;
-		size = s;
-		if (s >= 33 * PAGE_SIZE)
-			break;
-	}
-	start = PAGE_ALIGN(start);
-
-	min_low_pfn = start >> PAGE_SHIFT;
-	max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
-	max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
-	boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
-					 PPC_MEMSTART >> PAGE_SHIFT,
-					 max_low_pfn);
-
-	/* remove the bootmem bitmap from the available memory */
-	mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
-
-	/* add everything in phys_avail into the bootmem map */
-	for (i = 0; i < phys_avail.n_regions; ++i)
-		free_bootmem(phys_avail.regions[i].address,
-			     phys_avail.regions[i].size);
-
-	init_bootmem_done = 1;
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
-	unsigned long start_pfn, end_pfn;
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-#ifdef CONFIG_HIGHMEM
-	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
-	pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
-	map_page(KMAP_FIX_BEGIN, 0, 0);	/* XXX gross */
-	kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
-	kmap_prot = PAGE_KERNEL;
-#endif /* CONFIG_HIGHMEM */
-	/* All pages are DMA-able so we put them all in the DMA zone. */
-	start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-	end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
-	add_active_range(0, start_pfn, end_pfn);
-
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
-#else
-	max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	free_area_init_nodes(max_zone_pfns);
-}
-
-void __init mem_init(void)
-{
-	unsigned long addr;
-	int codepages = 0;
-	int datapages = 0;
-	int initpages = 0;
-#ifdef CONFIG_HIGHMEM
-	unsigned long highmem_mapnr;
-
-	highmem_mapnr = total_lowmem >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	max_mapnr = total_memory >> PAGE_SHIFT;
-
-	high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
-	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
-
-	totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* if we are booted from BootX with an initial ramdisk,
-	   make sure the ramdisk pages aren't reserved. */
-	if (initrd_start) {
-		for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
-			ClearPageReserved(virt_to_page(addr));
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
-	     addr += PAGE_SIZE) {
-		if (!PageReserved(virt_to_page(addr)))
-			continue;
-		if (addr < (ulong) etext)
-			codepages++;
-		else if (addr >= (unsigned long)&__init_begin
-			 && addr < (unsigned long)&__init_end)
-			initpages++;
-		else if (addr < (ulong) klimit)
-			datapages++;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	{
-		unsigned long pfn;
-
-		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
-			struct page *page = mem_map + pfn;
-
-			ClearPageReserved(page);
-			init_page_count(page);
-			__free_page(page);
-			totalhigh_pages++;
-		}
-		totalram_pages += totalhigh_pages;
-	}
-#endif /* CONFIG_HIGHMEM */
-
-        printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
-	       (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
-	       codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
-	       initpages<< (PAGE_SHIFT-10),
-	       (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
-
-	mem_init_done = 1;
-}
-
-/*
- * Set phys_avail to the amount of physical memory,
- * less the kernel text/data/bss.
- */
-void __init
-set_phys_avail(unsigned long total_memory)
-{
-	unsigned long kstart, ksize;
-
-	/*
-	 * Initially, available physical memory is equivalent to all
-	 * physical memory.
-	 */
-
-	phys_avail.regions[0].address = PPC_MEMSTART;
-	phys_avail.regions[0].size = total_memory;
-	phys_avail.n_regions = 1;
-
-	/*
-	 * Map out the kernel text/data/bss from the available physical
-	 * memory.
-	 */
-
-	kstart = __pa(_stext);	/* should be 0 */
-	ksize = PAGE_ALIGN(klimit - _stext);
-
-	mem_pieces_remove(&phys_avail, kstart, ksize, 0);
-	mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/* Remove the init RAM disk from the available memory. */
-	if (initrd_start) {
-		mem_pieces_remove(&phys_avail, __pa(initrd_start),
-				  initrd_end - initrd_start, 1);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-/* Mark some memory as reserved by removing it from phys_avail. */
-void __init reserve_phys_mem(unsigned long start, unsigned long size)
-{
-	mem_pieces_remove(&phys_avail, start, size, 1);
-}
-
-/*
- * This is called when a page has been modified by the kernel.
- * It just marks the page as not i-cache clean.  We do the i-cache
- * flush later when the page is given to a user process, if necessary.
- */
-void flush_dcache_page(struct page *page)
-{
-	clear_bit(PG_arch_1, &page->flags);
-}
-
-void flush_dcache_icache_page(struct page *page)
-{
-#ifdef CONFIG_BOOKE
-	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
-	__flush_dcache_icache(start);
-	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
-#elif defined(CONFIG_8xx)
-	/* On 8xx there is no need to kmap since highmem is not supported */
-	__flush_dcache_icache(page_address(page)); 
-#else
-	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
-#endif
-
-}
-void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
-{
-	clear_page(page);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *pg)
-{
-	copy_page(vto, vfrom);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	unsigned long maddr;
-
-	maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(maddr, maddr + len);
-	kunmap(page);
-}
-
-/*
- * This is called at the end of handling a user page fault, when the
- * fault has been handled by updating a PTE in the linux page tables.
- * We use it to preload an HPTE into the hash table corresponding to
- * the updated linux PTE.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t pte)
-{
-	/* handle i-cache coherency */
-	unsigned long pfn = pte_pfn(pte);
-
-	if (pfn_valid(pfn)) {
-		struct page *page = pfn_to_page(pfn);
-#ifdef CONFIG_8xx
-		/* On 8xx, the TLB handlers work in 2 stages:
-	 	 * First, a zeroed entry is loaded by TLBMiss handler,
-		 * which causes the TLBError handler to be triggered.
-		 * That means the zeroed TLB has to be invalidated
-		 * whenever a page miss occurs.
-		 */
-		_tlbie(address, 0 /* 8xx doesn't care about PID */);
-#endif
-		if (!PageReserved(page)
-		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm)
-				__flush_dcache_icache((void *) address);
-			else
-				flush_dcache_icache_page(page);
-			set_bit(PG_arch_1, &page->flags);
-		}
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (Hash != 0 && pte_young(pte)) {
-		struct mm_struct *mm;
-		pmd_t *pmd;
-
-		mm = (address < TASK_SIZE)? vma->vm_mm: &init_mm;
-		pmd = pmd_offset(pgd_offset(mm, address), address);
-		if (!pmd_none(*pmd))
-			add_hash_page(mm->context.id, address, pmd_val(*pmd));
-	}
-#endif
-}
-
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
-int page_is_ram(unsigned long pfn)
-{
-	return pfn < max_pfn;
-}
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
-
-	if (!page_is_ram(pfn))
-		vma_prot = __pgprot(pgprot_val(vma_prot)
-				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/ppc/mm/mem_pieces.c b/arch/ppc/mm/mem_pieces.c
deleted file mode 100644
index 6030a0ddfbb4..000000000000
--- a/arch/ppc/mm/mem_pieces.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.c
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <asm/page.h>
-
-#include "mem_pieces.h"
-
-extern struct mem_pieces phys_avail;
-
-static void mem_pieces_print(struct mem_pieces *);
-
-/*
- * Scan a region for a piece of a given size with the required alignment.
- */
-void __init *
-mem_pieces_find(unsigned int size, unsigned int align)
-{
-	int i;
-	unsigned a, e;
-	struct mem_pieces *mp = &phys_avail;
-
-	for (i = 0; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		e = a + mp->regions[i].size;
-		a = (a + align - 1) & -align;
-		if (a + size <= e) {
-			mem_pieces_remove(mp, a, size, 1);
-			return (void *) __va(a);
-		}
-	}
-	panic("Couldn't find %u bytes at %u alignment\n", size, align);
-
-	return NULL;
-}
-
-/*
- * Remove some memory from an array of pieces
- */
-void __init
-mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
-		  int must_exist)
-{
-	int i, j;
-	unsigned int end, rs, re;
-	struct reg_property *rp;
-
-	end = start + size;
-	for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
-		if (end > rp->address && start < rp->address + rp->size)
-			break;
-	}
-	if (i >= mp->n_regions) {
-		if (must_exist)
-			printk("mem_pieces_remove: [%x,%x) not in any region\n",
-			       start, end);
-		return;
-	}
-	for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
-		rs = rp->address;
-		re = rs + rp->size;
-		if (must_exist && (start < rs || end > re)) {
-			printk("mem_pieces_remove: bad overlap [%x,%x) with",
-			       start, end);
-			mem_pieces_print(mp);
-			must_exist = 0;
-		}
-		if (start > rs) {
-			rp->size = start - rs;
-			if (end < re) {
-				/* need to split this entry */
-				if (mp->n_regions >= MEM_PIECES_MAX)
-					panic("eek... mem_pieces overflow");
-				for (j = mp->n_regions; j > i + 1; --j)
-					mp->regions[j] = mp->regions[j-1];
-				++mp->n_regions;
-				rp[1].address = end;
-				rp[1].size = re - end;
-			}
-		} else {
-			if (end < re) {
-				rp->address = end;
-				rp->size = re - end;
-			} else {
-				/* need to delete this entry */
-				for (j = i; j < mp->n_regions - 1; ++j)
-					mp->regions[j] = mp->regions[j+1];
-				--mp->n_regions;
-				--i;
-				--rp;
-			}
-		}
-	}
-}
-
-static void __init
-mem_pieces_print(struct mem_pieces *mp)
-{
-	int i;
-
-	for (i = 0; i < mp->n_regions; ++i)
-		printk(" [%x, %x)", mp->regions[i].address,
-		       mp->regions[i].address + mp->regions[i].size);
-	printk("\n");
-}
-
-void __init
-mem_pieces_sort(struct mem_pieces *mp)
-{
-	unsigned long a, s;
-	int i, j;
-
-	for (i = 1; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i - 1; j >= 0; --j) {
-			if (a >= mp->regions[j].address)
-				break;
-			mp->regions[j+1] = mp->regions[j];
-		}
-		mp->regions[j+1].address = a;
-		mp->regions[j+1].size = s;
-	}
-}
-
-void __init
-mem_pieces_coalesce(struct mem_pieces *mp)
-{
-	unsigned long a, s, ns;
-	int i, j, d;
-
-	d = 0;
-	for (i = 0; i < mp->n_regions; i = j) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i + 1; j < mp->n_regions
-			     && mp->regions[j].address - a <= s; ++j) {
-			ns = mp->regions[j].address + mp->regions[j].size - a;
-			if (ns > s)
-				s = ns;
-		}
-		mp->regions[d].address = a;
-		mp->regions[d].size = s;
-		++d;
-	}
-	mp->n_regions = d;
-}
diff --git a/arch/ppc/mm/mem_pieces.h b/arch/ppc/mm/mem_pieces.h
deleted file mode 100644
index e2b700dc7f18..000000000000
--- a/arch/ppc/mm/mem_pieces.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.h
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#ifndef __MEM_PIECES_H__
-#define	__MEM_PIECES_H__
-
-#include <asm/prom.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Type Definitions */
-
-#define	MEM_PIECES_MAX	32
-
-struct mem_pieces {
-    int n_regions;
-    struct reg_property regions[MEM_PIECES_MAX];
-};
-
-/* Function Prototypes */
-
-extern void	*mem_pieces_find(unsigned int size, unsigned int align);
-extern void	 mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
-				   unsigned int size, int must_exist);
-extern void	 mem_pieces_coalesce(struct mem_pieces *mp);
-extern void	 mem_pieces_sort(struct mem_pieces *mp);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MEM_PIECES_H__ */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
deleted file mode 100644
index dacf45ced473..000000000000
--- a/arch/ppc/mm/mmu_context.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-unsigned long next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-#ifdef FEW_CONTEXTS
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-void steal_context(void);
-#endif /* FEW_CONTEXTS */
-
-/*
- * Initialize the context management stuff.
- */
-void __init
-mmu_context_init(void)
-{
-	/*
-	 * Some processors have too few contexts to reserve one for
-	 * init_mm, and require using context 0 for a normal task.
-	 * Other processors reserve the use of context zero for the kernel.
-	 * This code assumes FIRST_CONTEXT < 32.
-	 */
-	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-	next_mmu_context = FIRST_CONTEXT;
-#ifdef FEW_CONTEXTS
-	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-#endif /* FEW_CONTEXTS */
-}
-
-#ifdef FEW_CONTEXTS
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP.  If they do then this will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :).  This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- *  -- paulus
- */
-void
-steal_context(void)
-{
-	struct mm_struct *mm;
-
-	/* free up context `next_mmu_context' */
-	/* if we shouldn't free context 0, don't... */
-	if (next_mmu_context < FIRST_CONTEXT)
-		next_mmu_context = FIRST_CONTEXT;
-	mm = context_mm[next_mmu_context];
-	flush_tlb_mm(mm);
-	destroy_context(mm);
-}
-#endif /* FEW_CONTEXTS */
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
deleted file mode 100644
index 5f813e386b87..000000000000
--- a/arch/ppc/mm/mmu_decl.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Declarations of procedures and variables shared between files
- * in arch/ppc/mm/.
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-extern void mapin_ram(void);
-extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags);
-extern void reserve_phys_mem(unsigned long start, unsigned long size);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
-
-extern int __map_without_bats;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
-extern unsigned int rtas_data, rtas_size;
-
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
-extern int mem_init_done;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
-
-/* ...and now those things that may be slightly different between processor
- * architectures.  -- Dan
- */
-#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
-#define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram()		(0UL)
-
-#elif defined(CONFIG_4xx)
-#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-#else
-/* anything except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
- * which includes all new 82xx processors.  We need tlbie/tlbsync here
- * in that case (I think). -- Dan.
- */
-static inline void flush_HPTE(unsigned context, unsigned long va,
-			      unsigned long pdval)
-{
-	if ((Hash != 0) &&
-	    cpu_has_feature(CPU_FTR_HPTE_TABLE))
-		flush_hash_pages(0, va, pdval, 1);
-	else
-		_tlbie(va);
-}
-#endif
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
deleted file mode 100644
index 03a79bff1271..000000000000
--- a/arch/ppc/mm/pgtable.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * This file contains the routines setting up the linux page tables.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#include "mmu_decl.h"
-
-unsigned long ioremap_base;
-unsigned long ioremap_bot;
-int io_bat_index;
-
-#if defined(CONFIG_6xx)
-#define HAVE_BATS	1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef CONFIG_SMP
-extern void hash_page_sync(void);
-#endif
-
-#ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
-	    unsigned int size, int flags);
-
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x)	(0UL)
-#define p_mapped_by_bats(x)	(0UL)
-#endif /* HAVE_BATS */
-
-#ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
-#define PGDIR_ORDER	1
-#else
-#define PGDIR_ORDER	0
-#endif
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *ret;
-
-	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
-	return ret;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, PGDIR_ORDER);
-}
-
-__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte;
-	extern int mem_init_done;
-	extern void *early_get_page(void);
-
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
-
-pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *ptepage;
-
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
-#else
-	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
-#endif
-
-	ptepage = alloc_pages(flags, 0);
-	if (ptepage) {
-		clear_highpage(ptepage);
-		pgtable_page_ctor(ptepage);
-	}
-	return ptepage;
-}
-
-void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	free_page((unsigned long)pte);
-}
-
-void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	pgtable_page_dtor(ptepage);
-	__free_page(ptepage);
-}
-
-#ifndef CONFIG_PHYS_64BIT
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-#else /* CONFIG_PHYS_64BIT */
-void __iomem *
-ioremap64(unsigned long long addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
-
-	return ioremap64(addr64, size);
-}
-#endif /* CONFIG_PHYS_64BIT */
-
-void __iomem *
-__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
-{
-	unsigned long v, i;
-	phys_addr_t p;
-	int err;
-
-	/*
-	 * Choose an address to map it to.
-	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
-	 * (ioremap_bot records where we're up to).
-	 */
-	p = addr & PAGE_MASK;
-	size = PAGE_ALIGN(addr + size) - p;
-
-	/*
-	 * If the address lies within the first 16 MB, assume it's in ISA
-	 * memory space
-	 */
-	if (p < 16*1024*1024)
-		p += _ISA_MEM_BASE;
-
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using.
-	 * mem_init() sets high_memory so only do the check after that.
-	 */
-	if ( mem_init_done && (p < virt_to_phys(high_memory)) )
-	{
-		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
-		       __builtin_return_address(0));
-		return NULL;
-	}
-
-	if (size == 0)
-		return NULL;
-
-	/*
-	 * Is it already mapped?  Perhaps overlapped by a previous
-	 * BAT mapping.  If the whole area is mapped then we're done,
-	 * otherwise remap it since we want to keep the virt addrs for
-	 * each request contiguous.
-	 *
-	 * We make the assumption here that if the bottom and top
-	 * of the range we want are mapped then it's mapped to the
-	 * same virt address (and this is contiguous).
-	 *  -- Cort
-	 */
-	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
-		goto out;
-
-	if (mem_init_done) {
-		struct vm_struct *area;
-		area = get_vm_area(size, VM_IOREMAP);
-		if (area == 0)
-			return NULL;
-		v = (unsigned long) area->addr;
-	} else {
-		v = (ioremap_bot -= size);
-	}
-
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
-	/*
-	 * Should check if it is a candidate for a BAT mapping
-	 */
-
-	err = 0;
-	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
-		err = map_page(v+i, p+i, flags);
-	if (err) {
-		if (mem_init_done)
-			vunmap((void *)v);
-		return NULL;
-	}
-
-out:
-	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
-}
-
-void iounmap(volatile void __iomem *addr)
-{
-	/*
-	 * If mapped by BATs then there is nothing to do.
-	 * Calling vfree() generates a benign warning.
-	 */
-	if (v_mapped_by_bats((unsigned long)addr)) return;
-
-	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
-		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
-}
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port + _IO_BASE);
-}
-
-void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
-
-int
-map_page(unsigned long va, phys_addr_t pa, int flags)
-{
-	pmd_t *pd;
-	pte_t *pg;
-	int err = -ENOMEM;
-
-	/* Use upper 10 bits of VA to index the first level map */
-	pd = pmd_offset(pgd_offset_k(va), va);
-	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(pd, va);
-	if (pg != 0) {
-		err = 0;
-		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
-		if (mem_init_done)
-			flush_HPTE(0, va, pmd_val(*pd));
-	}
-	return err;
-}
-
-/*
- * Map in all of physical memory starting at KERNELBASE.
- */
-void __init mapin_ram(void)
-{
-	unsigned long v, p, s, f;
-
-	s = mmu_mapin_ram();
-	v = KERNELBASE + s;
-	p = PPC_MEMSTART + s;
-	for (; s < total_lowmem; s += PAGE_SIZE) {
-		if ((char *) v >= _stext && (char *) v < etext)
-			f = _PAGE_RAM_TEXT;
-		else
-			f = _PAGE_RAM;
-		map_page(v, p, f);
-		v += PAGE_SIZE;
-		p += PAGE_SIZE;
-	}
-}
-
-/* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
-
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > KERNELBASE && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-#ifdef HAVE_BATS
-	/*
-	 * Use a BAT for this if possible...
-	 */
-	if (io_bat_index < 2 && is_power_of_2(size)
-	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
-		setbat(io_bat_index, virt, phys, size, flags);
-		++io_bat_index;
-		return;
-	}
-#endif /* HAVE_BATS */
-
-	/* No BATs available, put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
-/* Scan the real Linux page tables and return a PTE pointer for
- * a virtual address in a context.
- * Returns true (1) if PTE was found, zero otherwise.  The pointer to
- * the PTE pointer is unmodified if PTE is not found.
- */
-int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
-{
-        pgd_t	*pgd;
-        pmd_t	*pmd;
-        pte_t	*pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd_present(*pmd)) {
-                        pte = pte_offset_map(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = 1;
-				*ptep = pte;
-				if (pmdp)
-					*pmdp = pmd;
-				/* XXX caller needs to do pte_unmap, yuck */
-                        }
-                }
-        }
-        return(retval);
-}
-
-/* Find physical address for this virtual address.  Normally used by
- * I/O functions, but anyone can call it.
- */
-unsigned long iopa(unsigned long addr)
-{
-	unsigned long pa;
-
-	/* I don't know why this won't work on PMacs or CHRP.  It
-	 * appears there is some bug, or there is some implicit
-	 * mapping done not properly represented by BATs or in page
-	 * tables.......I am actively working on resolving this, but
-	 * can't hold up other stuff.  -- Dan
-	 */
-	pte_t *pte;
-	struct mm_struct *mm;
-
-	/* Check the BATs */
-	pa = v_mapped_by_bats(addr);
-	if (pa)
-		return pa;
-
-	/* Allow mapping of user addresses (within the thread)
-	 * for DMA if necessary.
-	 */
-	if (addr < TASK_SIZE)
-		mm = current->mm;
-	else
-		mm = &init_mm;
-
-	pa = 0;
-	if (get_pteptr(mm, addr, &pte, NULL)) {
-		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
-		pte_unmap(pte);
-	}
-
-	return(pa);
-}
-
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
deleted file mode 100644
index 0c1dc155996a..000000000000
--- a/arch/ppc/mm/ppc_mmu.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/prom.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-
-#include "mmu_decl.h"
-#include "mem_pieces.h"
-
-PTE *Hash, *Hash_end;
-unsigned long Hash_size, Hash_mask;
-unsigned long _SDR1;
-
-union ubat {			/* BAT register values to be loaded */
-	BAT	bat;
-	u32	word[2];
-} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
-
-struct batrange {		/* stores address ranges mapped by BATs */
-	unsigned long start;
-	unsigned long limit;
-	unsigned long phys;
-} bat_addrs[4];
-
-/*
- * Return PA for this VA if it is mapped by a BAT, or 0
- */
-unsigned long v_mapped_by_bats(unsigned long va)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
-			return bat_addrs[b].phys + (va - bat_addrs[b].start);
-	return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_bats(unsigned long pa)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (pa >= bat_addrs[b].phys
-	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
-		              +bat_addrs[b].phys)
-			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
-	return 0;
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long tot, bl, done;
-	unsigned long max_size = (256<<20);
-	unsigned long align;
-
-	if (__map_without_bats)
-		return 0;
-
-	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
-
-	/* Make sure we don't map a block larger than the
-	   smallest alignment of the physical address. */
-	/* alignment of PPC_MEMSTART */
-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
-	/* set BAT block size to MIN(max_size, align) */
-	if (align && align < max_size)
-		max_size = align;
-
-	tot = total_lowmem;
-	for (bl = 128<<10; bl < max_size; bl <<= 1) {
-		if (bl * 2 > tot)
-			break;
-	}
-
-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
-	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
-	if ((done < tot) && !bat_addrs[3].limit) {
-		/* use BAT3 to cover a bit more */
-		tot -= done;
-		for (bl = 128<<10; bl < max_size; bl <<= 1)
-			if (bl * 2 > tot)
-				break;
-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
-		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
-	}
-
-	return done;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 2 between 128k and 256M.
- */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags)
-{
-	unsigned int bl;
-	int wimgxpp;
-	union ubat *bat = BATS[index];
-
-	if (((flags & _PAGE_NO_CACHE) == 0) &&
-	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
-		flags |= _PAGE_COHERENT;
-
-	bl = (size >> 17) - 1;
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, etc. */
-		/* Do DBAT first */
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT | _PAGE_GUARDED);
-		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
-		if (flags & _PAGE_USER)
-#endif
-			bat[1].bat.batu.vp = 1;
-		if (flags & _PAGE_GUARDED) {
-			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
-		} else {
-			/* make IBAT same as DBAT */
-			bat[0] = bat[1];
-		}
-	} else {
-		/* 601 cpu */
-		if (bl > BL_8M)
-			bl = BL_8M;
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT);
-		wimgxpp |= (flags & _PAGE_RW)?
-			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
-	}
-
-	bat_addrs[index].start = virt;
-	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-	bat_addrs[index].phys = phys;
-}
-
-/*
- * Initialize the hash table and patch the instructions in hashtable.S.
- */
-void __init MMU_init_hw(void)
-{
-	unsigned int hmask, mb, mb2;
-	unsigned int n_hpteg, lg_n_hpteg;
-
-	extern unsigned int hash_page_patch_A[];
-	extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
-	extern unsigned int hash_page[];
-	extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
-
-	if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
-		/*
-		 * Put a blr (procedure return) instruction at the
-		 * start of hash_page, since we can still get DSI
-		 * exceptions on a 603.
-		 */
-		hash_page[0] = 0x4e800020;
-		flush_icache_range((unsigned long) &hash_page[0],
-				   (unsigned long) &hash_page[1]);
-		return;
-	}
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
-
-#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
-#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
-#define MIN_N_HPTEG	1024		/* min 64kB hash table */
-
-	/*
-	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
-	 * This is less than the recommended amount, but then
-	 * Linux ain't AIX.
-	 */
-	n_hpteg = total_memory / (PAGE_SIZE * 8);
-	if (n_hpteg < MIN_N_HPTEG)
-		n_hpteg = MIN_N_HPTEG;
-	lg_n_hpteg = __ilog2(n_hpteg);
-	if (n_hpteg & (n_hpteg - 1)) {
-		++lg_n_hpteg;		/* round up if not power of 2 */
-		n_hpteg = 1 << lg_n_hpteg;
-	}
-	Hash_size = n_hpteg << LG_HPTEG_SIZE;
-
-	/*
-	 * Find some memory for the hash table.
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = mem_pieces_find(Hash_size, Hash_size);
-	cacheable_memzero(Hash, Hash_size);
-	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-
-	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
-
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
-
-
-	/*
-	 * Patch up the instructions in hashtable.S:create_hpte
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
-	Hash_mask = n_hpteg - 1;
-	hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
-	mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
-	if (lg_n_hpteg > 16)
-		mb2 = 16 - LG_HPTEG_SIZE;
-
-	hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
-	hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
-	hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
-
-	/*
-	 * Ensure that the locations we've patched have been written
-	 * out from the data cache and invalidated in the instruction
-	 * cache, on those machines with split caches.
-	 */
-	flush_icache_range((unsigned long) &hash_page_patch_A[0],
-			   (unsigned long) &hash_page_patch_C[1]);
-
-	/*
-	 * Patch up the instructions in hashtable.S:flush_hash_page
-	 */
-	flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
-	flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
-	flush_icache_range((unsigned long) &flush_hash_patch_A[0],
-			   (unsigned long) &flush_hash_patch_B[1]);
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
-}
diff --git a/arch/ppc/mm/tlb.c b/arch/ppc/mm/tlb.c
deleted file mode 100644
index 4ff260bc9dd1..000000000000
--- a/arch/ppc/mm/tlb.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This file contains the routines for TLB flushing.
- * On machines where the MMU uses a hash table to store virtual to
- * physical translations, these routines flush entries from the
- * hash table also.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/tlbflush.h>
-#include <asm/tlb.h>
-
-#include "mmu_decl.h"
-
-/*
- * Called when unmapping pages to flush entries from the TLB/hash table.
- */
-void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
-{
-	unsigned long ptephys;
-
-	if (Hash != 0) {
-		ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(mm->context.id, addr, ptephys, 1);
-	}
-}
-
-/*
- * Called by ptep_set_access_flags, must flush on CPUs for which the
- * DSI handler can't just "fixup" the TLB on a write fault
- */
-void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
-{
-	if (Hash != 0)
-		return;
-	_tlbie(addr);
-}
-
-/*
- * Called at the end of a mmu_gather operation to make sure the
- * TLB flush is completely done.
- */
-void tlb_flush(struct mmu_gather *tlb)
-{
-	if (Hash == 0) {
-		/*
-		 * 603 needs to flush the whole TLB here since
-		 * it doesn't use a hash table.
-		 */
-		_tlbia();
-	}
-}
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes kernel pages
- *
- * since the hardware hash table functions as an extension of the
- * tlb as far as the linux tables are concerned, flush it too.
- *    -- Cort
- */
-
-/*
- * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
- * the cache operations on the bus.  Hence we need to use an IPI
- * to get the other CPU(s) to invalidate their TLBs.
- */
-#ifdef CONFIG_SMP_750
-#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
-#else
-#define FINISH_FLUSH	do { } while (0)
-#endif
-
-static void flush_range(struct mm_struct *mm, unsigned long start,
-			unsigned long end)
-{
-	pmd_t *pmd;
-	unsigned long pmd_end;
-	int count;
-	unsigned int ctx = mm->context.id;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-	start &= PAGE_MASK;
-	if (start >= end)
-		return;
-	end = (end - 1) | ~PAGE_MASK;
-	pmd = pmd_offset(pgd_offset(mm, start), start);
-	for (;;) {
-		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
-		if (pmd_end > end)
-			pmd_end = end;
-		if (!pmd_none(*pmd)) {
-			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
-			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
-		}
-		if (pmd_end == end)
-			break;
-		start = pmd_end + 1;
-		++pmd;
-	}
-}
-
-/*
- * Flush kernel TLB entries in the given range
- */
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_range(&init_mm, start, end);
-	FINISH_FLUSH;
-}
-
-/*
- * Flush all the (user) entries for the address space described by mm.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	struct vm_area_struct *mp;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-
-	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
-		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
-	FINISH_FLUSH;
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-	struct mm_struct *mm;
-	pmd_t *pmd;
-
-	if (Hash == 0) {
-		_tlbie(vmaddr);
-		return;
-	}
-	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
-	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
-	if (!pmd_none(*pmd))
-		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
-	FINISH_FLUSH;
-}
-
-/*
- * For each address in the range, find the pte for the address
- * and check _PAGE_HASHPTE bit; if it is set, find and destroy
- * the corresponding HPTE.
- */
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-{
-	flush_range(vma->vm_mm, start, end);
-	FINISH_FLUSH;
-}
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
deleted file mode 100644
index 76551b679030..000000000000
--- a/arch/ppc/platforms/4xx/Kconfig
+++ /dev/null
@@ -1,285 +0,0 @@
-config 4xx
-	bool
-	depends on 40x || 44x
-	default y
-
-config WANT_EARLY_SERIAL
-	bool
-	select SERIAL_8250
-	default n
-
-menu "IBM 4xx options"
-	depends on 4xx
-
-choice
-	prompt "Machine Type"
-	depends on 40x
-	default WALNUT
-
-config BUBINGA
-	bool "Bubinga"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-	bool "CPCI405"
-	help
-	  This option enables support for the CPCI405 board.
-
-config EP405
-	bool "EP405/EP405PC"
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-	bool "Redwood-5"
-	help
-	  This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-	bool "Redwood-6"
-	help
-	  This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-	bool "Sycamore"
-	help
-	  This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-	bool "Walnut"
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-	bool "Xilinx-ML300"
-	select XILINX_VIRTEX_II_PRO
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML300 evaluation board.
-
-config XILINX_ML403
-	bool "Xilinx-ML403"
-	select XILINX_VIRTEX_4_FX
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML403 evaluation board.
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 44x
-	default EBONY
-
-config BAMBOO
-	bool "Bamboo"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-	bool "Luan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440SP evaluation board.
-
-config YUCCA
-	bool "Yucca"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440SPe evaluation board.
-
-config OCOTEA
-	bool "Ocotea"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GX evaluation board.
-
-config TAISHAN
-	bool "Taishan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440GX evaluation board.
-
-endchoice
-
-config EP405PC
-	bool "EP405PC Support"
-	depends on EP405
-
-
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
-config NP405H
-	bool
-	depends on ASH
-	default y
-
-config 440EP
-	bool
-	depends on BAMBOO
-	select PPC_FPU
-	default y
-
-config 440GP
-	bool
-	depends on EBONY
-	default y
-
-config 440GX
-	bool
-	depends on OCOTEA || TAISHAN
-	default y
-
-config 440SP
-	bool
-	depends on LUAN
-	default y
-
-config 440SPE
-	bool
-	depends on YUCCA
-	default y
-
-config 440
-	bool
-	depends on 440GP || 440SP || 440SPE || 440EP
-	default y
-
-config 440A
-	bool
-	depends on 440GX
-	default y
-
-config IBM440EP_ERR42
-	bool
-	depends on 440EP
-	default y
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
-	bool
-	depends on 40x && !403GCX && !405GPR && !405EP
-	default y
-
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
-	bool
-	depends on 40x && !405GPR && !405EP
-	default y
-
-config BOOKE
-	bool
-	depends on 44x
-	default y
-
-config IBM_OCP
-	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
-	default y
-
-config IBM_EMAC4
-	bool
-	depends on 440GX || 440SP || 440SPE
-	default y
-
-config BIOS_FIXUP
-	bool
-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
-	default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	depends on OAK
-	default y
-
-config 405EP
-	bool
-	depends on BUBINGA
-	default y
-
-config 405GP
-	bool
-	depends on CPCI405 || EP405 || WALNUT
-	default y
-
-config 405GPR
-	bool
-	depends on SYCAMORE
-	default y
-
-config XILINX_VIRTEX_II_PRO
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX_4_FX
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX
-	bool
-
-config STB03xxx
-	bool
-	depends on REDWOOD_5 || REDWOOD_6
-	default y
-
-config EMBEDDEDBOOT
-	bool
-
-config IBM_OPENBIOS
-	bool
-	depends on ASH || REDWOOD_5 || REDWOOD_6
-	default y
-
-config PPC4xx_DMA
-	bool "PPC4xx DMA controller support"
-	depends on 4xx
-
-config PPC4xx_EDMA
-	bool
-	depends on !STB03xxx && PPC4xx_DMA
-	default y
-
-config PPC_GEN550
-	bool
-	depends on 4xx
-	default y
-
-choice
-	prompt "TTYS0 device and default console"
-	depends on 40x
-	default UART0_TTYS0
-
-config UART0_TTYS0
-	bool "UART0"
-
-config UART0_TTYS1
-	bool "UART1"
-
-endchoice
-
-config SERIAL_SICC
-	bool "SICC Serial port support"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-endmenu
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
deleted file mode 100644
index 723ad7985cc6..000000000000
--- a/arch/ppc/platforms/4xx/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Makefile for the PowerPC 4xx linux kernel.
-
-obj-$(CONFIG_BAMBOO)		+= bamboo.o
-obj-$(CONFIG_CPCI405)		+= cpci405.o
-obj-$(CONFIG_EBONY)		+= ebony.o
-obj-$(CONFIG_EP405)		+= ep405.o
-obj-$(CONFIG_BUBINGA)		+= bubinga.o
-obj-$(CONFIG_LUAN)		+= luan.o
-obj-$(CONFIG_YUCCA)		+= yucca.o
-obj-$(CONFIG_OCOTEA)		+= ocotea.o
-obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
-obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
-obj-$(CONFIG_SYCAMORE)		+= sycamore.o
-obj-$(CONFIG_TAISHAN)		+= taishan.o
-obj-$(CONFIG_WALNUT)		+= walnut.o
-obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
-obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
-
-obj-$(CONFIG_405GP)		+= ibm405gp.o
-obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
-obj-$(CONFIG_NP405H)		+= ibmnp405h.o
-obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
-obj-$(CONFIG_440EP)		+= ibm440ep.o
-obj-$(CONFIG_440GP)		+= ibm440gp.o
-obj-$(CONFIG_440GX)		+= ibm440gx.o
-obj-$(CONFIG_440SP)		+= ibm440sp.o
-obj-$(CONFIG_440SPE)		+= ppc440spe.o
-obj-$(CONFIG_405EP)		+= ibm405ep.o
-obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
deleted file mode 100644
index 01f20f4c14fe..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/ethtool.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Bamboo external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
-};
-
-static void __init
-bamboo_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = BAMBOO_TMRCLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-
-}
-
-static int
-bamboo_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
-
-	return 0;
-}
-
-static inline int
-bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 28, 28, 28, 28 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 27, 27, 27, 27 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 26, 26, 26, 26 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 25, 25, 25, 25 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init bamboo_set_emacdata(void)
-{
-	u8 * base_addr;
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	u8 val;
-	int mode;
-	u32 excluded = 0;
-
-	base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (BAMBOO_SEL_MII(val))
-		mode = PHY_MODE_MII;
-	else if (BAMBOO_SEL_RMII(val))
-		mode = PHY_MODE_RMII;
-	else
-		mode = PHY_MODE_SMII;
-
-	/*
-	 * SW2 on the Bamboo is used for ethernet configuration and is accessed
-	 * via the CONFIG2 register in the FPGA.  If the ANEG pin is set,
-	 * overwrite the supported features with the settings in SW2.
-	 *
-	 * This is used as a workaround for the improperly biased RJ-45 sockets
-	 * on the Rev. 0 Bamboo.  By default only 10baseT is functional.
-	 * Removing inductors L17 and L18 from the board allows 100baseT, but
-	 * disables 10baseT.  The Rev. 1 has no such limitations.
-	 */
-
-	base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (!BAMBOO_AUTONEGOTIATE(val)) {
-		excluded |= SUPPORTED_Autoneg;
-		if (BAMBOO_FORCE_100Mbps(val)) {
-			excluded |= SUPPORTED_10baseT_Full;
-			excluded |= SUPPORTED_10baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_100baseT_Half;
-			else
-				excluded |= SUPPORTED_100baseT_Full;
-		} else {
-			excluded |= SUPPORTED_100baseT_Full;
-			excluded |= SUPPORTED_100baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_10baseT_Half;
-			else
-				excluded |= SUPPORTED_10baseT_Full;
-		}
-	}
-
-	/* Set mac_addr, phy mode and unsupported phy features for each EMAC */
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-}
-
-static int
-bamboo_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	return (bus == 0 && devfn == 0);
-}
-
-#define PCI_READW(offset) \
-        (readw((void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pci_reg_base+offset)))
-
-static void __init
-bamboo_setup_pci(void)
-{
-	void *pci_reg_base;
-	unsigned long memory_size;
-	memory_size = ppc_md.find_end_of_memory();
-
-	pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
-
-	/* Enable PCI I/O, Mem, and Busmaster cycles */
-	PCI_WRITEW(PCI_READW(PCI_COMMAND) |
-		   PCI_COMMAND_MEMORY |
-		   PCI_COMMAND_MASTER, PCI_COMMAND);
-
-	/* Disable region first */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
-
-	/* PLB starting addr: 0x00000000A0000000 */
-	PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
-
-	/* PCI start addr, 0xA0000000 (PCI Address) */
-	PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
-
-	/* Enable no pre-fetch, enable region */
-	PCI_WRITEL(((0xffffffff -
-		     (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
-		      BAMBOO_PCIL0_PMM0MA);
-
-	/* Disable region one */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-
-	/* Disable region two */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-
-	/* Now configure the PCI->PLB windows, we only use PTM1
-	 *
-	 * For Inbound flow, set the window size to all available memory
-	 * This is required because if size is smaller,
-	 * then Eth/PCI DD would fail as PCI card not able to access
-	 * the memory allocated by DD.
-	 */
-
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);	/* disabled region 1 */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);	/* begin of address map */
-
-	memory_size = 1 << fls(memory_size - 1);
-
-	/* Size low + Enabled */
-	PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
-
-	eieio();
-	iounmap(pci_reg_base);
-}
-
-static void __init
-bamboo_setup_hose(void)
-{
-	unsigned int bar_response, bar;
-	struct pci_controller *hose;
-
-	bamboo_setup_pci();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			BAMBOO_PCI_LOWER_IO,
-			BAMBOO_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			BAMBOO_PCI_LOWER_MEM,
-			BAMBOO_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	ppc_md.pci_exclude_device = bamboo_exclude_device;
-
-	hose->io_space.start = BAMBOO_PCI_LOWER_IO;
-	hose->io_space.end = BAMBOO_PCI_UPPER_IO;
-	hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
-	hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
-	isa_io_base =
-		(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
-	hose->io_base_virt = (void *)isa_io_base;
-
-	setup_indirect_pci(hose,
-			BAMBOO_PCI_CFGA_PLB32,
-			BAMBOO_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = bamboo_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-bamboo_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
-	port.irq = 3;
-	port.uartclk = clocks.uart2;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(2, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
-	port.irq = 4;
-	port.uartclk = clocks.uart3;
-	port.line = 3;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 3 failed\n");
-	}
-}
-
-static void __init
-bamboo_setup_arch(void)
-{
-
-	bamboo_set_emacdata();
-
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	bamboo_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	bamboo_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bamboo_setup_arch;
-	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = bamboo_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bamboo_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
deleted file mode 100644
index dcd3d09a0a71..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Bamboo board definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_BAMBOO_H__
-#define __ASM_BAMBOO_H__
-
-#include <platforms/4xx/ibm440ep.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0		0x0EF600E00
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE			0xfff00000
-#define PIBS_MAC_BASE			(PIBS_FLASH_BASE+0xc0400)
-#define PIBS_MAC_SIZE			0x200
-#define PIBS_MAC_OFFSET			0x100
-
-/* Default clock rate */
-#define BAMBOO_TMRCLK			25000000
-
-/* RTC/NVRAM location */
-#define BAMBOO_RTC_ADDR			0x080000000ULL
-#define BAMBOO_RTC_SIZE			0x2000
-
-/* FPGA Registers */
-#define BAMBOO_FPGA_ADDR		0x080002000ULL
-
-#define BAMBOO_FPGA_CONFIG2_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x1)
-#define BAMBOO_FULL_DUPLEX_EN(x)	(x & 0x08)
-#define BAMBOO_FORCE_100Mbps(x)		(x & 0x04)
-#define BAMBOO_AUTONEGOTIATE(x)		(x & 0x02)
-
-#define BAMBOO_FPGA_SETTING_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x3)
-#define BAMBOO_BOOT_SMALL_FLASH(x)	(!(x & 0x80))
-#define BAMBOO_LARGE_FLASH_EN(x)	(!(x & 0x40))
-#define BAMBOO_BOOT_NAND_FLASH(x)	(!(x & 0x20))
-
-#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
-#define BAMBOO_SEL_MII(x)		(x & 0x80)
-#define BAMBOO_SEL_RMII(x)		(x & 0x40)
-#define BAMBOO_SEL_SMII(x)		(x & 0x20)
-
-/* Flash */
-#define BAMBOO_SMALL_FLASH_LOW		0x087f00000ULL
-#define BAMBOO_SMALL_FLASH_HIGH		0x0fff00000ULL
-#define BAMBOO_SMALL_FLASH_SIZE		0x100000
-#define BAMBOO_LARGE_FLASH_LOW		0x087800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH1	0x0ff800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH2	0x0ffc00000ULL
-#define BAMBOO_LARGE_FLASH_SIZE		0x400000
-#define BAMBOO_SRAM_LOW			0x087f00000ULL
-#define BAMBOO_SRAM_HIGH1		0x0fff00000ULL
-#define BAMBOO_SRAM_HIGH2		0x0ff800000ULL
-#define BAMBOO_SRAM_SIZE		0x100000
-#define BAMBOO_NAND_FLASH_REG_ADDR	0x090000000ULL
-#define BAMBOO_NAND_FLASH_REG_SIZE	0x2000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE			4
-
-#define UART0_IO_BASE			0xEF600300
-#define UART1_IO_BASE			0xEF600400
-#define UART2_IO_BASE			0xEF600500
-#define UART3_IO_BASE			0xEF600600
-
-#define BASE_BAUD			33177600/3/16
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)		\
-	STD_UART_OP(3)
-
-/* PCI support */
-#define BAMBOO_PCI_CFGA_PLB32		0xeec00000
-#define BAMBOO_PCI_CFGD_PLB32		0xeec00004
-
-#define BAMBOO_PCI_IO_BASE		0x00000000e8000000ULL
-#define BAMBOO_PCI_IO_SIZE		0x00010000
-#define BAMBOO_PCI_MEM_OFFSET		0x00000000
-#define BAMBOO_PCI_PHY_MEM_BASE		0x00000000a0000000ULL
-
-#define BAMBOO_PCI_LOWER_IO		0x00000000
-#define BAMBOO_PCI_UPPER_IO		0x0000ffff
-#define BAMBOO_PCI_LOWER_MEM		0xa0000000
-#define BAMBOO_PCI_UPPER_MEM		0xafffffff
-#define BAMBOO_PCI_MEM_BASE		0xa0000000
-
-#define BAMBOO_PCIL0_BASE		0x00000000ef400000ULL
-#define BAMBOO_PCIL0_SIZE		0x40
-
-#define BAMBOO_PCIL0_PMM0LA		0x000
-#define BAMBOO_PCIL0_PMM0MA		0x004
-#define BAMBOO_PCIL0_PMM0PCILA		0x008
-#define BAMBOO_PCIL0_PMM0PCIHA		0x00C
-#define BAMBOO_PCIL0_PMM1LA		0x010
-#define BAMBOO_PCIL0_PMM1MA		0x014
-#define BAMBOO_PCIL0_PMM1PCILA		0x018
-#define BAMBOO_PCIL0_PMM1PCIHA		0x01C
-#define BAMBOO_PCIL0_PMM2LA		0x020
-#define BAMBOO_PCIL0_PMM2MA		0x024
-#define BAMBOO_PCIL0_PMM2PCILA		0x028
-#define BAMBOO_PCIL0_PMM2PCIHA		0x02C
-#define BAMBOO_PCIL0_PTM1MS		0x030
-#define BAMBOO_PCIL0_PTM1LA		0x034
-#define BAMBOO_PCIL0_PTM2MS		0x038
-#define BAMBOO_PCIL0_PTM2LA		0x03C
-
-#endif                          /* __ASM_BAMBOO_H__ */
-#endif                          /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
deleted file mode 100644
index cd696be55aca..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
- *
- * Author: SAW (IBM), derived from walnut.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/kgdb.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-extern bd_t __res;
-
-void *bubinga_rtc_base;
-
-/* Some IRQs unique to the board
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-bubinga_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The base baud is the PLL OUTA (provided in the board info
-          * structure) divided by the external UART Divisor, divided
-          * by 16.
-          */
-	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = (void*)ACTING_UART0_IO_BASE;
-	port.irq = ACTING_UART0_INT;
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = (void*)ACTING_UART1_IO_BASE;
-	port.irq = ACTING_UART1_INT;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-bubinga_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 1);
-
-        bubinga_early_serial_map();
-
-        /* RTC step for the evb405ep */
-        bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
-        TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
-                  bubinga_rtc_base, 8);
-        /* Identify the system */
-        printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init
-bubinga_map_io(void)
-{
-	ppc4xx_map_io();
-     	io_block_mapping(BUBINGA_RTC_VADDR,
-                         BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bubinga_setup_arch;
-	ppc_md.setup_io_mappings = bubinga_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bubinga_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
deleted file mode 100644
index 5c408060eb35..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Bubinga board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *	SAW (IBM)
- *	2003 (c) MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __BUBINGA_H__
-#define __BUBINGA_H__
-
-#include <platforms/4xx/ibm405ep.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the Bubinga board.
- * Generic 4xx plus RTC.
- */
-
-#define BUBINGA_RTC_PADDR	((uint)0xf0000000)
-#define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR
-#define BUBINGA_RTC_SIZE	((uint)8*1024)
-
-/* The UART clock is based off an internal clock -
- * define BASE_BAUD based on the internal clock and divider(s).
- * Since BASE_BAUD must be a constant, we will initialize it
- * using clock/divider values which OpenBIOS initializes
- * for typical configurations at various CPU speeds.
- * The base baud is calculated as (FWDA / EXT UART DIV / 16)
- */
-#define BASE_BAUD		0
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Bubinga"
-
-#endif /* __BUBINGA_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c
deleted file mode 100644
index 2e7e25dd84cb..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Board setup routines for the esd CPCI-405 cPCI Board.
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <platforms/4xx/ibm405gp.h>
-
-#ifdef CONFIG_GEN_RTC
-void *cpci405_nvram;
-#endif
-
-extern bd_t __res;
-
-/*
- * Some IRQs unique to CPCI-405.
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{28,	29,	30,	27},	/* IDSEL 15 - cPCI slot 8 */
-		{29,	30,	27,	28},	/* IDSEL 16 - cPCI slot 7 */
-		{30,	27,	28,	29},	/* IDSEL 17 - cPCI slot 6 */
-		{27,	28,	29,	30},	/* IDSEL 18 - cPCI slot 5 */
-		{28,	29,	30,	27},	/* IDSEL 19 - cPCI slot 4 */
-		{29,	30,	27,	28},	/* IDSEL 20 - cPCI slot 3 */
-		{30,	27,	28,	29},	/* IDSEL 21 - cPCI slot 2 */
-        };
-	const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-cpci405_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The uart clock is the cpu frequency (provided in the board info
-          * structure) divided by the external UART Divisor.
-          */
-	uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#else
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#endif
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#else
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#endif
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-cpci405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-        cpci405_early_serial_map();
-
-#ifdef CONFIG_GEN_RTC
-	TODC_INIT(TODC_TYPE_MK48T35,
-		  cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
-#endif
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-#endif
-}
-
-void __init
-cpci405_map_io(void)
-{
-	ppc4xx_map_io();
-
-#ifdef CONFIG_GEN_RTC
-	cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = cpci405_setup_arch;
-	ppc_md.setup_io_mappings = cpci405_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/cpci405.h b/arch/ppc/platforms/4xx/cpci405.h
deleted file mode 100644
index a6c0a138b0d7..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * CPCI-405 board specific definitions
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- */
-
-#ifdef __KERNEL__
-#ifndef __CPCI405_H__
-#define __CPCI405_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Map for the NVRAM space */
-#define CPCI405_NVRAM_PADDR	((uint)0xf0200000)
-#define CPCI405_NVRAM_SIZE	((uint)32*1024)
-
-#define BASE_BAUD		0
-
-#define PPC4xx_MACHINE_NAME     "esd CPCI-405"
-
-#endif	/* __CPCI405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
deleted file mode 100644
index 8027a36fc5bb..000000000000
--- a/arch/ppc/platforms/4xx/ebony.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Ebony board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Ebony external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ0: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ1: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ2: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ3: PCI slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ4: IRDA */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE),	/* IRQ5: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ6: PHYs */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ7: AUX */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ9: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ10: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ11: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ12: EXT */
-};
-
-static void __init
-ebony_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	/*
-	 * Determine system clock speed
-	 *
-	 * If we are on Rev. B silicon, then use
-	 * default external system clock.  If we are
-	 * on Rev. C silicon then errata forces us to
-	 * use the internal clock.
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GP Rev. B") == 0)
-		freq = EBONY_440GP_RB_SYSCLK;
-	else
-		freq = EBONY_440GP_RC_SYSCLK;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ebony_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Ebony\n");
-
-	return 0;
-}
-
-static inline int
-ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base + offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ebony_setup_pcix(void)
-{
-	void __iomem *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ebony_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ebony_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			EBONY_PCI_LOWER_IO,
-			EBONY_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			EBONY_PCI_LOWER_MEM,
-			EBONY_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = EBONY_PCI_LOWER_IO;
-	hose->io_space.end = EBONY_PCI_UPPER_IO;
-	hose->mem_space.start = EBONY_PCI_LOWER_MEM;
-	hose->mem_space.end = EBONY_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
-	isa_io_base = (unsigned long)hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			EBONY_PCI_CFGA_PLB32,
-			EBONY_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ebony_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-ebony_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ebony_setup_arch(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set mac_addr for each EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ebony_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ebony_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ebony_setup_arch;
-	ppc_md.show_cpuinfo = ebony_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ebony_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ebony_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
deleted file mode 100644
index f40e33d39d76..000000000000
--- a/arch/ppc/platforms/4xx/ebony.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Ebony board definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EBONY_H__
-#define __ASM_EBONY_H__
-
-#include <platforms/4xx/ibm440gp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xE0000800
-
-/* Where to find the MAC info */
-#define OPENBIOS_MAC_BASE	0xfffffe0c
-#define OPENBIOS_MAC_OFFSET	0x0c
-
-/* Default clock rates for Rev. B and Rev. C silicon */
-#define EBONY_440GP_RB_SYSCLK	33000000
-#define EBONY_440GP_RC_SYSCLK	400000000
-
-/* RTC/NVRAM location */
-#define EBONY_RTC_ADDR		0x0000000148000000ULL
-#define EBONY_RTC_SIZE		0x2000
-
-/* Flash */
-#define EBONY_FPGA_ADDR		0x0000000148300000ULL
-#define EBONY_BOOT_SMALL_FLASH(x)	(x & 0x20)
-#define EBONY_ONBRD_FLASH_EN(x)		(x & 0x02)
-#define EBONY_FLASH_SEL(x)		(x & 0x01)
-#define EBONY_SMALL_FLASH_LOW1	0x00000001ff800000ULL
-#define EBONY_SMALL_FLASH_LOW2	0x00000001ff880000ULL
-#define EBONY_SMALL_FLASH_HIGH1	0x00000001fff00000ULL
-#define EBONY_SMALL_FLASH_HIGH2	0x00000001fff80000ULL
-#define EBONY_SMALL_FLASH_SIZE	0x80000
-#define EBONY_LARGE_FLASH_LOW	0x00000001ff800000ULL
-#define EBONY_LARGE_FLASH_HIGH	0x00000001ffc00000ULL
-#define EBONY_LARGE_FLASH_SIZE	0x400000
-
-#define EBONY_SMALL_FLASH_BASE	0x00000001fff80000ULL
-#define EBONY_LARGE_FLASH_BASE	0x00000001ff800000ULL
-
-/*
- * Serial port defines
- */
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-/* external Epson SG-615P */
-#define BASE_BAUD	691200
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define EBONY_PCI_LOWER_IO	0x00000000
-#define EBONY_PCI_UPPER_IO	0x0000ffff
-#define EBONY_PCI_LOWER_MEM	0x80002000
-#define EBONY_PCI_UPPER_MEM	0xffffefff
-
-#define EBONY_PCI_CFGREGS_BASE	0x000000020ec00000
-#define EBONY_PCI_CFGA_PLB32	0x0ec00000
-#define EBONY_PCI_CFGD_PLB32	0x0ec00004
-
-#define EBONY_PCI_IO_BASE	0x0000000208000000ULL
-#define EBONY_PCI_IO_SIZE	0x00010000
-#define EBONY_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_EBONY_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c
deleted file mode 100644
index 5aa295022804..000000000000
--- a/arch/ppc/platforms/4xx/ep405.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-u8 *ep405_bcsr;
-u8 *ep405_nvram;
-
-static struct {
-	u8 cpld_xirq_select;
-	int pci_idsel;
-	int irq;
-} ep405_devtable[] = {
-#ifdef CONFIG_EP405PC
-	{0x07, 0x0E, 25},		/* EP405PC: USB */
-#endif
-};
-
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int i;
-
-	/* AFAICT this is only called a few times during PCI setup, so
-	   performance is not critical */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if (idsel == ep405_devtable[i].pci_idsel)
-			return ep405_devtable[i].irq;
-	}
-	return -1;
-};
-
-void __init
-ep405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	if (__res.bi_nvramsize == 512*1024) {
-		/* FIXME: we should properly handle NVRTCs of different sizes */
-		TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8);
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 */
-
-	/* Disable region zero first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Configure PTM (PCI->PLB) region 1 */
-	out_le32((void *) &(pcip->ptm1la), 0x00000000); /* PLB base address */
-	/* Disable PTM region 2 */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-#endif
-}
-
-void __init
-ep405_map_io(void)
-{
-	bd_t *bip = &__res;
-
-	ppc4xx_map_io();
-
-	ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE);
-
-	if (bip->bi_nvramsize > 0) {
-		ep405_nvram = ioremap(EP405_NVRAM_PADDR, bip->bi_nvramsize);
-	}
-}
-
-void __init
-ep405_init_IRQ(void)
-{
-	int i;
-
-	ppc4xx_init_IRQ();
-
-	/* Workaround for a bug in the firmware it incorrectly sets
-	   the IRQ polarities for XIRQ0 and XIRQ1 */
-	mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */
-	mtdcr(DCRN_UIC_SR(DCRN_UIC0_BASE), 0x00000060); /* clear bogus interrupts */
-
-	/* Activate the XIRQs from the CPLD */
-	writeb(0xf0, ep405_bcsr+10);
-
-	/* Set up IRQ routing */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if ( (ep405_devtable[i].irq >= 25)
-		     && (ep405_devtable[i].irq) <= 31) {
-			writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5);
-			writeb(ep405_devtable[i].irq - 25, ep405_bcsr+6);
-		}
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ep405_setup_arch;
-	ppc_md.setup_io_mappings = ep405_map_io;
-	ppc_md.init_IRQ = ep405_init_IRQ;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	if (__res.bi_nvramsize == 512*1024) {
-		ppc_md.time_init = todc_time_init;
-		ppc_md.set_rtc_time = todc_set_rtc_time;
-		ppc_md.get_rtc_time = todc_get_rtc_time;
-	} else {
-		printk("EP405: NVRTC size is not 512k (not a DS1557).  Not sure what to do with it\n");
-	}
-}
diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h
deleted file mode 100644
index 9814fc431725..000000000000
--- a/arch/ppc/platforms/4xx/ep405.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EP405_H__
-#define __ASM_EP405_H__
-
-/* We have a 405GP core */
-#include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-typedef struct board_info {
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-	unsigned int	 bi_nvramsize;		/* Size of the NVRAM/RTC */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-extern u8 *ep405_bcsr;
-extern u8 *ep405_nvram;
-
-/* Map for the BCSR and NVRAM space */
-#define EP405_BCSR_PADDR	((uint)0xf4000000)
-#define EP405_BCSR_SIZE		((uint)16)
-#define EP405_NVRAM_PADDR	((uint)0xf4200000)
-
-/* serial defines */
-#define BASE_BAUD		399193
-
-#define PPC4xx_MACHINE_NAME "Embedded Planet 405GP"
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_EP405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c
deleted file mode 100644
index fb3630a1608d..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Support for IBM PPC 405EP processors.
- *
- * Author: SAW (IBM), derived from ibmnp405l.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-static struct ocp_func_mal_data ibm405ep_mal0_def = {
-	.num_tx_chans	= 4,		/* Number of TX channels */
-	.num_rx_chans	= 2,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_emac_data ibm405ep_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm405ep_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_iic_data ibm405ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_mal0_def,
-	  .show		= &ocp_show_mal_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac0_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 17,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac1_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff7f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h
deleted file mode 100644
index 3ef20a547080..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * IBM PPC 405EP processor defines.
- *
- * Author: SAW (IBM), derived from ibm405gp.h.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405EP_H__
-#define __ASM_IBM405EP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#if defined(CONFIG_UART0_TTYS0)
-#define ACTING_UART0_IO_BASE	UART0_IO_BASE
-#define ACTING_UART1_IO_BASE	UART1_IO_BASE
-#define ACTING_UART0_INT	UART0_INT
-#define ACTING_UART1_INT	UART1_INT
-#else
-#define ACTING_UART0_IO_BASE	UART1_IO_BASE
-#define ACTING_UART1_IO_BASE	UART0_IO_BASE
-#define ACTING_UART0_INT	UART1_INT
-#define ACTING_UART1_INT	UART0_INT
-#endif
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, ACTING_UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)ACTING_UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_DEBUG_IO_BASE	ACTING_UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* DCR defines */
-#define DCRN_CPMSR_BASE         0x0BA
-#define DCRN_CPMFR_BASE         0x0B9
-
-#define DCRN_CPC0_PLLMR0_BASE   0x0F0
-#define DCRN_CPC0_BOOT_BASE     0x0F1
-#define DCRN_CPC0_CR1_BASE      0x0F2
-#define DCRN_CPC0_EPRCSR_BASE   0x0F3
-#define DCRN_CPC0_PLLMR1_BASE   0x0F4
-#define DCRN_CPC0_UCR_BASE      0x0F5
-#define DCRN_CPC0_UCR_U0DIV     0x07F
-#define DCRN_CPC0_SRR_BASE      0x0F6
-#define DCRN_CPC0_JTAGID_BASE   0x0F7
-#define DCRN_CPC0_SPARE_BASE    0x0F8
-#define DCRN_CPC0_PCI_BASE      0x0F9
-
-
-#define IBM_CPM_GPT             0x80000000      /* GPT interface */
-#define IBM_CPM_PCI             0x40000000      /* PCI bridge */
-#define IBM_CPM_UIC             0x00010000      /* Universal Int Controller */
-#define IBM_CPM_CPU             0x00008000      /* processor core */
-#define IBM_CPM_EBC             0x00002000      /* EBC controller */
-#define IBM_CPM_SDRAM0          0x00004000      /* SDRAM memory controller */
-#define IBM_CPM_GPIO0           0x00001000      /* General Purpose IO */
-#define IBM_CPM_TMRCLK          0x00000400      /* CPU timers */
-#define IBM_CPM_PLB             0x00000100      /* PLB bus arbiter */
-#define IBM_CPM_OPB             0x00000080      /* PLB to OPB bridge */
-#define IBM_CPM_DMA             0x00000040      /* DMA controller */
-#define IBM_CPM_IIC0            0x00000010      /* IIC interface */
-#define IBM_CPM_UART1           0x00000002      /* serial port 0 */
-#define IBM_CPM_UART0           0x00000001      /* serial port 1 */
-#define DFLT_IBM4xx_PM          ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-                                        | IBM_CPM_OPB | IBM_CPM_EBC \
-                                        | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-                                        | IBM_CPM_UIC | IBM_CPM_TMRCLK)
-#define DCRN_DMA0_BASE          0x100
-#define DCRN_DMA1_BASE          0x108
-#define DCRN_DMA2_BASE          0x110
-#define DCRN_DMA3_BASE          0x118
-#define DCRNCAP_DMA_SG          1       /* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE         0x120
-#define DCRN_EBC_BASE           0x012
-#define DCRN_DCP0_BASE          0x014
-#define DCRN_MAL_BASE           0x180
-#define DCRN_OCM0_BASE          0x018
-#define DCRN_PLB0_BASE          0x084
-#define DCRN_PLLMR_BASE         0x0B0
-#define DCRN_POB0_BASE          0x0A0
-#define DCRN_SDRAM0_BASE        0x010
-#define DCRN_UIC0_BASE          0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405EP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c
deleted file mode 100644
index 2ac67a2f0ba6..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Original author: Armin Kuster akuster@mvista.com
- *
- *    Module name: ibm405gp.c
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gp_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gp_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffff80,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h
deleted file mode 100644
index 9f15e5518719..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster akuster@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GP_H__
-#define __ASM_IBM405GP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c
deleted file mode 100644
index 9f4dacffdbb3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gpr_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gpr_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gpr_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gpr_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gpr_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gpr_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffe000,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x00001fff,	/* IRQ7 - IRQ12, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h
deleted file mode 100644
index 9e01f1515de3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GPR_H__
-#define __ASM_IBM405GPR_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GPR_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
deleted file mode 100644
index 0de91532aabb..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * PPC440EP I/O descriptions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <platforms/4xx/ibm440ep.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440ep_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440ep_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440ep_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440ep_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0EF600000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440EP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440EP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440EP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 3,
-	  .paddr	= PPC440EP_UART3_ADDR,
-	  .irq		= UART3_INT,
-	  .pm		= IBM_CPM_UART3,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600700ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600800ULL,
-	  .irq		= 7,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440ep_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0EF600B00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 1,
-	  .paddr	= 0x0EF600C00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600E00ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600F00ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0EF600D00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity	= 0xffbffe03,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity	= 0xffffc6af,
-	  .triggering	= 0x06000140,
-	  .ext_irq_mask = 0x00003800,	/* IRQ7 - IRQ9 */
-	},
-};
-
-static struct resource usb_gadget_resources[] = {
-	[0] = {
-		.start	= 0x050000100ULL,
-		.end 	= 0x05000017FULL,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 55,
-		.end	= 55,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device usb_gadget_device = {
-	.name		= "musbhsfc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(usb_gadget_resources),
-	.resource       = usb_gadget_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibm440ep_devs[] __initdata = {
-	&usb_gadget_device,
-};
-
-static int __init
-ibm440ep_platform_add_devices(void)
-{
-	return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
-}
-arch_initcall(ibm440ep_platform_add_devices);
-
diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h
deleted file mode 100644
index d92572727d20..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440EP definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440EP_H
-#define __PPC_PLATFORMS_IBM440EP_H
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440EP_UART0_ADDR		0x0EF600300
-#define PPC440EP_UART1_ADDR		0x0EF600400
-#define PPC440EP_UART2_ADDR		0x0EF600500
-#define PPC440EP_UART3_ADDR		0x0EF600600
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_USB1H		0x08000000	/* USB 1.1 Host */
-#define IBM_CPM_FPU		0x04000000	/* floating point unit */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bus Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB4		0x00040000	/* PLB4 bus arbiter */
-#define IBM_CPM_PLB4x3		0x00020000	/* PLB4 to PLB3 bridge controller */
-#define IBM_CPM_PLB3x4		0x00010000	/* PLB3 to PLB4 bridge controller */
-#define IBM_CPM_PLB3		0x00008000	/* PLB3 bus arbiter */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00000020	/* ethernet port 0 */
-#define IBM_CPM_EMAC1		0x00000010	/* ethernet port 1 */
-#define IBM_CPM_UART2		0x00000008	/* serial port 2 */
-#define IBM_CPM_UART3		0x00000004	/* serial port 3 */
-#define IBM_CPM_USB2D		0x00000002	/* USB 2.0 Device */
-#define IBM_CPM_USB2H		0x00000001	/* USB 2.0 Host */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
-				| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
-				| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
-				| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
-				| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
-
-
-#endif /* __PPC_PLATFORMS_IBM440EP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c
deleted file mode 100644
index b67a72e5c6fe..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * PPC440GP I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gp.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gp_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gp_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gp_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h
deleted file mode 100644
index 391c90e1f5ea..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440GP definitions
- *
- * Roland Dreier <roland@digitalvampire.org>
- *
- * Copyright 2002 Roland Dreier
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This file contains code that was originally in the files ibm44x.h
- * and ebony.h, which were written by Matt Porter of MontaVista Software Inc.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GP_H
-#define __PPC_PLATFORMS_IBM440GP_H
-
-
-/* UART */
-#define PPC440GP_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GP_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI)
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#include <asm/ibm44x.h>
-#include <syslib/ibm440gp_common.h>
-
-#endif /* __PPC_PLATFORMS_IBM440GP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c
deleted file mode 100644
index 685abffcb6ce..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * PPC440GX I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gx_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,   	/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 1,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac2_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 0,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 2,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 2,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 65,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 0,		/* TAH device index */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac3_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 1,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 3,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 3,            /* MAL rx channel number */
-	.mal_tx_chan    = 3,            /* MAL tx channel number */
-	.wol_irq        = 67,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 1,		/* TAH device index */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gx_mal0_def = {
-	.num_tx_chans   = 4,    	/* Number of TX channels */
-	.num_rx_chans   = 4,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gx_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gx_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GX_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GX_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gx_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gx_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0x0000000140000C00ULL,
-	  .irq		= 64,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0x0000000140000E00ULL,
-	  .irq		= 66,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_RGMII,
-	  .paddr	= 0x0000000140000790ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000b50ULL,
-	  .irq		= 68,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000d50ULL,
-	  .irq		= 69,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-	{ .polarity 	= 0xffff83ff,
-	  .triggering	= 0x000f83c0,
-	  .ext_irq_mask	= 0x00007c00,	/* IRQ13 - IRQ17 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h
deleted file mode 100644
index 599c4289b9c2..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * PPC440GX definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GX_H
-#define __PPC_PLATFORMS_IBM440GX_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440GX_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GX_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_RGMII		0x10000000	/* RGMII */
-#define IBM_CPM_TAHOE0		0x08000000	/* TAHOE 0 */
-#define IBM_CPM_TAHOE1		0x04000000	/* TAHOE 1 */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-#define IBM_CPM_EMAC1  		0x00000010	/* EMAC 1     */
-#define IBM_CPM_EMAC2  		0x00000008	/* EMAC 2     */
-#define IBM_CPM_EMAC3  		0x00000004	/* EMAC 3     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#endif /* __PPC_PLATFORMS_IBM440GX_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c
deleted file mode 100644
index de8f7ac5623c..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * PPC440SP I/O descriptions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440sp.h>
-#include <asm/ocp.h>
-
-static struct ocp_func_emac_data ibm440sp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440sp_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440sp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440sp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440sp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000001f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440sp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h
deleted file mode 100644
index 2978682f1720..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * PPC440SP definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440SP_H
-#define __PPC_PLATFORMS_IBM440SP_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SP_UART0_ADDR	0x00000001f0000200ULL
-#define PPC440SP_UART1_ADDR	0x00000001f0000300ULL
-#define PPC440SP_UART2_ADDR	0x00000001f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		2
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_IBM440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
deleted file mode 100644
index 1afc3642e5b1..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmnp405h.h>
-
-static struct ocp_func_emac_data ibmnp405h_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibmnp405h_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 1,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac2_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 2,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 2,		/* MAL rx channel number */
-	.mal_tx_chan	= 4,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac3_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 3,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 3,		/* MAL rx channel number */
-	.mal_tx_chan	= 6,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibmnp405h_mal0_def = {
-	.num_tx_chans	= 8,		/* Number of TX channels */
-	.num_rx_chans	= 4,		/* Number of RX channels */
-	.txeob_irq	= 17,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 18,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 46,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 47,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 45,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibmnp405h_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmnp405h_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibmnp405h_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 37,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibmnp405h_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 38,
-	  .pm		= IBM_CPM_EMAC1,
-	  .additions	= &ibmnp405h_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0xEF600a00,
-	  .irq		= 39,
-	  .pm		= IBM_CPM_EMAC2,
-	  .additions	= &ibmnp405h_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0xEF600b00,
-	  .irq		= 40,
-	  .pm		= IBM_CPM_EMAC3,
-	  .additions	= &ibmnp405h_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0xEF600C10,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
deleted file mode 100644
index 08a6a7791903..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP405H_H__
-#define __ASM_IBMNP405H_H__
-
-
-/* ibm405.h at bottom of this file */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x00000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_ADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_ADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_ADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_ADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	4
-
-#define UART0_INT	0
-#define UART1_INT	1
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define OPB0_BASE	0xEF600600
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base:(u8 *) UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(1)          \
-        STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_CHCR_BASE	0x0F1
-#define DCRN_CHPSR_BASE	0x0B4
-#define DCRN_CPMSR_BASE	0x0BA
-#define DCRN_CPMFR_BASE	0x0B9
-#define DCRN_CPMER_BASE	0x0B8
-
-/* CPM Clocking & Power Management defines */
-#define IBM_CPM_PCI		0x40000000	/* PCI */
-#define IBM_CPM_EMAC2	0x20000000	/* EMAC 2 MII */
-#define IBM_CPM_EMAC3	0x04000000	/* EMAC 3 MII */
-#define IBM_CPM_EMAC0	0x00800000	/* EMAC 0 MII */
-#define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
-#define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
-#define IBM_CPM_CPU	0x00008000	/* processor core */
-#define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
-#define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
-#define IBM_CPM_HDLC	0x00000800	/* HDCL */
-#define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
-#define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
-#define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
-#define IBM_CPM_DMA	0x00000040	/* DMA controller */
-#define IBM_CPM_IIC0	0x00000010	/* IIC interface */
-#define IBM_CPM_UART0	0x00000002	/* serial port 0 */
-#define IBM_CPM_UART1	0x00000001	/* serial port 1 */
-/* this is the default setting for devices put to sleep when booting */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU 	\
-			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB 	\
-			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
-			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2	\
-			| IBM_CPM_EMAC3 | IBM_CPM_PCI)
-
-#define DCRN_DMA0_BASE	0x100
-#define DCRN_DMA1_BASE	0x108
-#define DCRN_DMA2_BASE	0x110
-#define DCRN_DMA3_BASE	0x118
-#define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE	0x120
-#define DCRN_EBC_BASE	0x012
-#define DCRN_DCP0_BASE	0x014
-#define DCRN_MAL_BASE	0x180
-#define DCRN_OCM0_BASE	0x018
-#define DCRN_PLB0_BASE	0x084
-#define DCRN_PLLMR_BASE	0x0B0
-#define DCRN_POB0_BASE	0x0A0
-#define DCRN_SDRAM0_BASE 0x010
-#define DCRN_UIC0_BASE	0x0C0
-#define DCRN_UIC1_BASE	0x0D0
-#define DCRN_CPC0_EPRCSR 0x0F3
-
-#define UIC0_UIC1NC	0x00000002
-
-#define CHR1_CETE	0x00000004	/* CPU external timer enable */
-#define UIC0	DCRN_UIC0_BASE
-#define UIC1	DCRN_UIC1_BASE
-
-#undef NR_UICS
-#define NR_UICS	2
-
-/* EMAC DCRN's FIXME: armin */
-#define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP405H_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c
deleted file mode 100644
index 799a2eccccc3..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <platforms/4xx/ibmstb4.h>
-
-static struct ocp_func_iic_data ibmstb4_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibmstb4_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstb4_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC1_BASE,
-	  .irq		= IIC1_IRQ,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibmstb4_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IDE,
-	  .paddr	= IDE0_BASE,
-	  .irq		= IDE0_IRQ,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID,
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0x7fffff01,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007e,	/* IRQ0 - IRQ5 */
-	}
-};
-
-static struct resource ohci_usb_resources[] = {
-	[0] = {
-		.start	= USB0_BASE,
-		.end	= USB0_BASE + USB0_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= USB0_IRQ,
-		.end	= USB0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device ohci_usb_device = {
-	.name		= "ppc-soc-ohci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ohci_usb_resources),
-	.resource	= ohci_usb_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibmstb4_devs[] __initdata = {
-	&ohci_usb_device,
-};
-
-static int __init
-ibmstb4_platform_add_devices(void)
-{
-	return platform_add_devices(ibmstb4_devs, ARRAY_SIZE(ibmstb4_devs));
-}
-arch_initcall(ibmstb4_platform_add_devices);
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h
deleted file mode 100644
index 31a08abaa4a2..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTB4_H__
-#define __ASM_IBMSTB4_H__
-
-
-/* serial port defines */
-#define STB04xxx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_PCI_IO_ADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_PADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STB04xxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	ppu
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STB04xxx_MAP_IO_ADDR(a)	(((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE		3
-#define UART0_INT		20
-
-#ifdef __BOOTER__
-#define UART0_IO_BASE		0x40040000
-#else
-#define UART0_IO_BASE		0xe0040000
-#endif
-
-#define UART1_INT		21
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE		0x40000000
-#else
-#define UART1_IO_BASE		0xe0000000
-#endif
-
-#define UART2_INT		31
-#ifdef __BOOTER__
-#define UART2_IO_BASE		0x400e0000
-#else
-#define UART2_IO_BASE		0xe00e0000
-#endif
-
-#define IDE0_BASE	0x400F0000
-#define IDE0_SIZE	0x200
-#define IDE0_IRQ	25
-#define IIC0_BASE	0x40030000
-#define IIC1_BASE	0x400b0000
-#define OPB0_BASE	0x40000000
-#define GPIO0_BASE	0x40060000
-
-#define USB0_BASE	0x40010000
-#define USB0_SIZE	0xA0
-#define USB0_IRQ	18
-
-#define IIC_NUMS 2
-#define UART_NUMS	3
-#define IIC0_IRQ	9
-#define IIC1_IRQ	10
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_USB0	0x40000000	/* IEEE-1284 */
-#define IBM_CPM_IIC1	0x20000000	/* IIC 1 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_SDRAM1	0x02000000	/* SDRAM 1 memory controller */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_DMA1	0x00800000	/* reserved */
-#define IBM_CPM_XPT1	0x00400000	/* reserved */
-#define IBM_CPM_XPT2	0x00200000	/* reserved */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_CPM_EPI	0x00040000	/* DCR Extension */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 1 */
-#define IBM_CPM_USBSDRA	0x00004000	/* SDRAM 0 memory controller */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_TMRCLK	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_UART2	0x00000008	/* Serial Control Port */
-#define IBM_CPM_DDIO	0x00000004	/* Descrambler */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
-			| IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
-			| IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
-			| IBM_CPM_XPT27 | IBM_CPM_UIC )
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTB4_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c
deleted file mode 100644
index 090ddcbecc5e..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmstbx25.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_iic_data ibmstbx25_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index        = 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstbx25_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff8f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000707f,	/* IRQ7 - IRQ9, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h
deleted file mode 100644
index 31b63343e641..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTBX25_H__
-#define __ASM_IBMSTBX25_H__
-
-
-/* serial port defines */
-#define STBx25xx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_PADDR	STBx25xx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STBxxxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	uart2
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STBx25xx_MAP_IO_ADDR(a)	(((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE	3
-
-#define OPB_BASE_START	0x40000000
-#define EBIU_BASE_START	0xF0100000
-#define DCR_BASE_START  0x0000
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE	0x40000000
-#define UART2_IO_BASE	0x40010000
-#else
-#define UART1_IO_BASE	0xe0000000
-#define UART2_IO_BASE	0xe0010000
-#endif
-#define SC0_BASE	0x40020000	/* smart card #0 */
-#define IIC0_BASE	0x40030000
-#ifdef __BOOTER__
-#define UART0_IO_BASE	0x40040000
-#else
-#define UART0_IO_BASE	0xe0040000
-#endif
-#define SCC0_BASE	0x40040000	/* Serial 0 controller IrdA */
-#define GPT0_BASE	0x40050000	/* General purpose timers */
-#define GPIO0_BASE	0x40060000
-#define SC1_BASE	0x40070000	/* smart card #1 */
-#define SCP0_BASE	0x400C0000	/* Serial Controller Port */
-#define SSP0_BASE	0x400D0000	/* Sync serial port */
-
-#define IDE0_BASE		0xf0100000
-#define REDWOOD_IDE_CTRL	0xf1100000
-
-#define RTCFPC_IRQ	0
-#define XPORT_IRQ	1
-#define AUD_IRQ		2
-#define AID_IRQ		3
-#define DMA0		4
-#define DMA1_IRQ	5
-#define DMA2_IRQ	6
-#define DMA3_IRQ	7
-#define SC0_IRQ		8
-#define IIC0_IRQ	9
-#define IIR0_IRQ	10
-#define GPT0_IRQ	11
-#define GPT1_IRQ	12
-#define SCP0_IRQ	13
-#define SSP0_IRQ	14
-#define GPT2_IRQ	15	/* count down timer */
-#define SC1_IRQ		16
-/* IRQ 17 - 19  external */
-#define UART0_INT	20
-#define UART1_INT	21
-#define UART2_INT	22
-#define XPTDMA_IRQ	23
-#define DCRIDE_IRQ	24
-/* IRQ 25 - 30 external */
-#define IDE0_IRQ	26
-
-#define IIC_NUMS	1
-#define UART_NUMS	3
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_RTCFP_BASE		0x310
-
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_IRR	0x02000000	/* Infrared receiver */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_UART2	0x00200000	/* Serial Control Port */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_PM_DCRIDE	0x00040000	/* DCR timeout & IDE line Mode clock */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 0 */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_C405T	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_RTCFPC	0x00000020	/* Realtime clock and front panel */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA	\
-			| IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T 	\
-			| IBM_CPM_XPT27 | IBM_CPM_UIC)
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#define DCRN_RTC_FPC0_CNTL 	(DCRN_RTCFP_BASE + 0x00)	/* RTC cntl */
-#define DCRN_RTC_FPC0_INT 	(DCRN_RTCFP_BASE + 0x01)	/* RTC Interrupt */
-#define DCRN_RTC_FPC0_TIME 	(DCRN_RTCFP_BASE + 0x02)	/* RTC time reg */
-#define DCRN_RTC_FPC0_ALRM 	(DCRN_RTCFP_BASE + 0x03)	/* RTC Alarm reg */
-#define DCRN_RTC_FPC0_D1 	(DCRN_RTCFP_BASE + 0x04)	/* LED Data 1 */
-#define DCRN_RTC_FPC0_D2 	(DCRN_RTCFP_BASE + 0x05)	/* LED Data 2 */
-#define DCRN_RTC_FPC0_D3 	(DCRN_RTCFP_BASE + 0x06)	/* LED Data 3 */
-#define DCRN_RTC_FPC0_D4 	(DCRN_RTCFP_BASE + 0x07)	/* LED Data 4 */
-#define DCRN_RTC_FPC0_D5 	(DCRN_RTCFP_BASE + 0x08)	/* LED Data 5 */
-#define DCRN_RTC_FPC0_FCNTL 	(DCRN_RTCFP_BASE + 0x09)	/* LED control */
-#define DCRN_RTC_FPC0_BRT 	(DCRN_RTCFP_BASE + 0x0A)	/* Brightness cntl */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTBX25_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
deleted file mode 100644
index f6d8c2e8b6b7..000000000000
--- a/arch/ppc/platforms/4xx/luan.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * Luan board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-luan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = LUAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-luan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
-
-	return 0;
-}
-
-static inline int
-luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	/* PCIX0 in adapter mode, no host interrupt routing */
-
-	/* PCIX1 */
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 49, 49, 49, 49 },	/* IDSEL 1 - PCIX1 Slot 0 */
-			{ 49, 49, 49, 49 },	/* IDSEL 2 - PCIX1 Slot 1 */
-			{ 49, 49, 49, 49 },	/* IDSEL 3 - PCIX1 Slot 2 */
-			{ 49, 49, 49, 49 },	/* IDSEL 4 - PCIX1 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	/* PCIX2 */
-	} else if (hose->index == 1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 50, 50, 50, 50 },	/* IDSEL 1 - PCIX2 Slot 0 */
-			{ 50, 50, 50, 50 },	/* IDSEL 2 - PCIX2 Slot 1 */
-			{ 50, 50, 50, 50 },	/* IDSEL 3 - PCIX2 Slot 2 */
-			{ 50, 50, 50, 50 },	/* IDSEL 4 - PCIX2 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init luan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-#define PCIX_READW(offset) \
-	(readw((void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pcix_reg_base+offset)))
-
-static void __init
-luan_setup_pcix(void)
-{
-	int i;
-	void *pcix_reg_base;
-
-	for (i=0;i<3;i++) {
-		pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
-
-		/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-		PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-		/* Disable all windows */
-		PCIX_WRITEL(0, PCIX0_POM0SA);
-		PCIX_WRITEL(0, PCIX0_POM1SA);
-		PCIX_WRITEL(0, PCIX0_POM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SAH);
-		PCIX_WRITEL(0, PCIX0_PIM1SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-		/*
-		 * Setup 512MB PLB->PCI outbound mem window
-		 * (a_n000_0000->0_n000_0000)
-		 * */
-		PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
-		PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
-		PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
-
-		/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-		PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
-		PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-		iounmap(pcix_reg_base);
-	}
-
-	eieio();
-}
-
-static void __init
-luan_setup_hose(struct pci_controller *hose,
-		int lower_mem,
-		int upper_mem,
-		int cfga,
-		int cfgd,
-		u64 pcix_io_base)
-{
-	char name[20];
-
-	sprintf(name, "PCIX%d host bridge", hose->index);
-
-	hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			LUAN_PCIX_LOWER_IO,
-			LUAN_PCIX_UPPER_IO,
-			IORESOURCE_IO,
-			name);
-
-	pci_init_resource(&hose->mem_resources[0],
-			lower_mem,
-			upper_mem,
-			IORESOURCE_MEM,
-			name);
-
-	hose->io_space.start = LUAN_PCIX_LOWER_IO;
-	hose->io_space.end = LUAN_PCIX_UPPER_IO;
-	hose->mem_space.start = lower_mem;
-	hose->mem_space.end = upper_mem;
-	hose->io_base_virt = ioremap64(pcix_io_base, PCIX_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose, cfga, cfgd);
-	hose->set_cfg_type = 1;
-}
-
-static void __init
-luan_setup_hoses(void)
-{
-	struct pci_controller *hose1, *hose2;
-
-	/* Configure windows on the PCI-X host bridge */
-	luan_setup_pcix();
-
-	/* Allocate hoses for PCIX1 and PCIX2 */
-	hose1 = pcibios_alloc_controller();
-	if (!hose1)
-		return;
-
-	hose2 = pcibios_alloc_controller();
-	if (!hose2) {
-		pcibios_free_controller(hose1);
-		return;
-	}
-
-	/* Setup PCIX1 */
-	hose1->first_busno = 0;
-	hose1->last_busno = 0xff;
-
-	luan_setup_hose(hose1,
-			LUAN_PCIX1_LOWER_MEM,
-			LUAN_PCIX1_UPPER_MEM,
-			PCIX1_CFGA,
-			PCIX1_CFGD,
-			PCIX1_IO_BASE);
-
-	hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
-
-	/* Setup PCIX2 */
-	hose2->first_busno = hose1->last_busno + 1;
-	hose2->last_busno = 0xff;
-
-	luan_setup_hose(hose2,
-			LUAN_PCIX2_LOWER_MEM,
-			LUAN_PCIX2_UPPER_MEM,
-			PCIX2_CFGA,
-			PCIX2_CFGD,
-			PCIX2_IO_BASE);
-
-	hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = luan_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-luan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-luan_setup_arch(void)
-{
-	luan_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SP clocking is the same -mdp */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	luan_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	luan_early_serial_map();
-
-	/* Identify the system */
-	printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = luan_setup_arch;
-	ppc_md.show_cpuinfo = luan_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = luan_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = luan_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
deleted file mode 100644
index 68dd46b0a5c4..000000000000
--- a/arch/ppc/platforms/4xx/luan.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Luan board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_LUAN_H__
-#define __ASM_LUAN_H__
-
-#include <platforms/4xx/ibm440sp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define LUAN_TMR_CLK		25000000
-
-/* Flash */
-#define LUAN_FPGA_REG_0			0x0000000148300000ULL
-#define LUAN_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define LUAN_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define LUAN_SMALL_FLASH_HIGH		0x00000001ffe00000ULL
-#define LUAN_SMALL_FLASH_SIZE		0x100000
-#define LUAN_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define LUAN_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define LUAN_LARGE_FLASH_SIZE		0x400000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define LUAN_PCIX_LOWER_IO	0x00000000
-#define LUAN_PCIX_UPPER_IO	0x0000ffff
-#define LUAN_PCIX0_LOWER_MEM	0x80000000
-#define LUAN_PCIX0_UPPER_MEM	0x9fffffff
-#define LUAN_PCIX1_LOWER_MEM	0xa0000000
-#define LUAN_PCIX1_UPPER_MEM	0xbfffffff
-#define LUAN_PCIX2_LOWER_MEM	0xc0000000
-#define LUAN_PCIX2_UPPER_MEM	0xdfffffff
-
-#define LUAN_PCIX_MEM_SIZE	0x20000000
-#define LUAN_PCIX_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_LUAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
deleted file mode 100644
index 308386ef6f77..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Ocotea board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-ocotea_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = OCOTEA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ocotea_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init ocotea_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/*
-	 * Note: Current rev. board only operates in Group 4a
-	 * mode, so we always set EMAC0-1 for SMII and EMAC2-3
-	 * for RGMII (though these could run in RTBI just the same).
-	 *
-	 * The FPGA reg 3 information isn't even suitable for
-	 * determining the phy_mode, so if the board becomes
-	 * usable in !4a, it will be necessary to parse an environment
-	 * variable from the firmware or similar to properly configure
-	 * the phy_map/phy_mode.
-	 */
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=0; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		}
-		else {
-			emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ocotea_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ocotea_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ocotea_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			OCOTEA_PCI_LOWER_IO,
-			OCOTEA_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			OCOTEA_PCI_LOWER_MEM,
-			OCOTEA_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = OCOTEA_PCI_LOWER_IO;
-	hose->io_space.end = OCOTEA_PCI_UPPER_IO;
-	hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
-	hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			OCOTEA_PCI_CFGA_PLB32,
-			OCOTEA_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ocotea_map_irq;
-}
-
-
-TODC_ALLOC();
-
-static void __init
-ocotea_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ocotea_setup_arch(void)
-{
-	ocotea_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ocotea_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ocotea_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-static void __init ocotea_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm440gx_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ocotea_setup_arch;
-	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ocotea_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ocotea_early_serial_map;
-#endif
-	ppc_md.init = ocotea_init;
-}
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
deleted file mode 100644
index 89730ce2322c..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Ocotea board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_OCOTEA_H__
-#define __ASM_OCOTEA_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xe0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xfff00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0xb0500)
-#define PIBS_MAC_SIZE		0x200
-#define PIBS_MAC_OFFSET		0x100
-
-/* External timer clock frequency */
-#define OCOTEA_TMR_CLK	25000000
-
-/* RTC/NVRAM location */
-#define OCOTEA_RTC_ADDR		0x0000000148000000ULL
-#define OCOTEA_RTC_SIZE		0x2000
-
-/* Flash */
-#define OCOTEA_FPGA_REG_0		0x0000000148300000ULL
-#define OCOTEA_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define OCOTEA_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define OCOTEA_SMALL_FLASH_HIGH		0x00000001fff00000ULL
-#define OCOTEA_SMALL_FLASH_SIZE		0x100000
-#define OCOTEA_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define OCOTEA_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define OCOTEA_LARGE_FLASH_SIZE		0x400000
-
-/* FPGA_REG_3 (Ethernet Groups) */
-#define OCOTEA_FPGA_REG_3		0x0000000148300003ULL
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define OCOTEA_PCI_LOWER_IO	0x00000000
-#define OCOTEA_PCI_UPPER_IO	0x0000ffff
-#define OCOTEA_PCI_LOWER_MEM	0x80000000
-#define OCOTEA_PCI_UPPER_MEM	0xffffefff
-
-#define OCOTEA_PCI_CFGREGS_BASE	0x000000020ec00000ULL
-#define OCOTEA_PCI_CFGA_PLB32	0x0ec00000
-#define OCOTEA_PCI_CFGD_PLB32	0x0ec00004
-
-#define OCOTEA_PCI_IO_BASE	0x0000000208000000ULL
-#define OCOTEA_PCI_IO_SIZE	0x00010000
-#define OCOTEA_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_OCOTEA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
deleted file mode 100644
index 1be5d1c8e266..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * PPC440SPe I/O descriptions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ppc440spe.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ppc440spe_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ppc440spe_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ppc440spe_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ppc440spe_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SPE_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SPE_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SPE_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ppc440spe_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000004f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ppc440spe_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x010f0004,
-	  .ext_irq_mask = 0x00000000,
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x001f8040,
-	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x00000000,
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
deleted file mode 100644
index f1e867c4c9fc..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440SPe definitions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_PPC440SPE_H
-#define __PPC_PLATFORMS_PPC440SPE_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
-#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
-#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		37
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_PPC440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c
deleted file mode 100644
index edf4d37d1a52..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for the IBM redwood5 eval board file
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood5_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood5_platform_add_devices(void)
-{
-	return platform_add_devices(redwood5_devs, ARRAY_SIZE(redwood5_devs));
-}
-
-void __init
-redwood5_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_DEBUG_BRINGUP
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n",      bip->bi_s_version);
-	printk("bi_r_version\t %s\n",      bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	bip->bi_enetaddr[0], bip->bi_enetaddr[1],
-	bip->bi_enetaddr[2], bip->bi_enetaddr[3],
-	bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq/ 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-		bip->bi_busfreq, bip->bi_busfreq / 1000000 );
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq/1000000);
-
-	printk("\n");
-#endif
-	device_initcall(redwood5_platform_add_devices);
-}
-
-void __init
-redwood5_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-	 unsigned long v, p;
-
-	/* 0x400x0000 -> 0xe00x0000 */
-	p = 0x40000000 | (i << 16);
-	v = STB04xxx_IO_BASE | (i << 16);
-
-	io_block_mapping(v, p, PAGE_SIZE,
-		 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) | _PAGE_GUARDED);
-	}
-
-
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood5_setup_arch;
-	ppc_md.setup_io_mappings = redwood5_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h
deleted file mode 100644
index 49edd4818970..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STB03xxx "Redwood" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood5 has an STB04xxx core */
-#include <platforms/4xx/ibmstb4.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char	bi_s_version[4];	/* Version of this structure */
-	unsigned char	bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	bi_memsize;		/* DRAM installed, in bytes */
-	unsigned int	bi_dummy;		/* field shouldn't exist */
-	unsigned char	bi_enetaddr[6];		/* Ethernet MAC address */
-	unsigned int	bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	bi_busfreq;		/* Bus speed, in Hz */
-	unsigned int	bi_tbfreq;		/* Software timebase freq */
-} bd_t;
-#endif /* !__ASSEMBLY__ */
-
-
-#define SMC91111_BASE_ADDR	0xf2000300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		28
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood5"
-
-#endif /* __ASM_REDWOOD5_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c
deleted file mode 100644
index 006e29f83a1a..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_pic.h>
-#include <linux/delay.h>
-#include <asm/machdep.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood6_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood6_platform_add_devices(void)
-{
-	return platform_add_devices(redwood6_devs, ARRAY_SIZE(redwood6_devs));
-}
-
-
-void __init
-redwood6_setup_arch(void)
-{
-#ifdef CONFIG_IDE
-	void *xilinx, *xilinx_1, *xilinx_2;
-	unsigned short us_reg5;
-#endif
-
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_IDE
-	xilinx = (unsigned long) ioremap(IDE_XLINUX_MUX_BASE, 0x10);
-	/* init xilinx control registers - enable ide mux, clear reset bit */
-	if (!xilinx) {
-		printk(KERN_CRIT
-		       "redwood6_setup_arch() xilinxi ioremap failed\n");
-		return;
-	}
-	xilinx_1 = xilinx + 0xa;
-	xilinx_2 = xilinx + 0xe;
-
-	us_reg5 = readb(xilinx_1);
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-
-	udelay(10 * 1000);
-
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-#endif
-
-#ifdef DEBUG_BRINGUP
-	bd_t *bip = (bd_t *) __res;
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n", bip->bi_s_version);
-	printk("bi_r_version\t %s\n", bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
-	       bip->bi_memsize / (1024 * 1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	       bip->bi_enetaddr[0], bip->bi_enetaddr[1], bip->bi_enetaddr[2],
-	       bip->bi_enetaddr[3], bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq / 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-	       bip->bi_busfreq, bip->bi_busfreq / 1000000);
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq / 1000000);
-
-	printk("\n");
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Redwood6 (STBx25XX) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	device_initcall(redwood6_platform_add_devices);
-}
-
-void __init
-redwood6_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-		unsigned long v, p;
-
-		/* 0x400x0000 -> 0xe00x0000 */
-		p = 0x40000000 | (i << 16);
-		v = STBx25xx_IO_BASE | (i << 16);
-
-		io_block_mapping(v, p, PAGE_SIZE,
-				 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) |
-				 _PAGE_GUARDED);
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood6_setup_arch;
-	ppc_md.setup_io_mappings = redwood6_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h
deleted file mode 100644
index 1edcbe5c51c7..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STBx25xx "Redwood6" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood6 has an STBx25xx core */
-#include <platforms/4xx/ibmstbx25.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char bi_s_version[4];	/* Version of this structure */
-	unsigned char bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int bi_memsize;	/* DRAM installed, in bytes */
-	unsigned int bi_dummy;	/* field shouldn't exist */
-	unsigned char bi_enetaddr[6];	/* Ethernet MAC address */
-	unsigned int bi_intfreq;	/* Processor speed, in Hz */
-	unsigned int bi_busfreq;	/* Bus speed, in Hz */
-	unsigned int bi_tbfreq;	/* Software timebase freq */
-} bd_t;
-#endif				/* !__ASSEMBLY__ */
-
-#define SMC91111_BASE_ADDR	0xf2030300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		27
-#define IDE_XLINUX_MUX_BASE        0xf2040000
-#define IDE_DMA_ADDR	0xfce00000
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood6"
-
-#endif				/* __ASM_REDWOOD5_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
deleted file mode 100644
index 8689f3e8ef3a..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *sycamore_rtc_base;
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-
-/* Some IRQs unique to Sycamore.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-sycamore_setup_arch(void)
-{
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the sycamore */
-	sycamore_rtc_base = (void *) SYCAMORE_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, sycamore_rtc_base, sycamore_rtc_base,
-		  sycamore_rtc_base, 8);
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Sycamore (IBM405GPr) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Enable inbound region one - 1GB size */
-	out_le32((void *) &(pcip->ptm1ms), 0xc0000001);
-
-	/* Disable outbound region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-
-	/* Disable inbound region two */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Disable outbound region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-
-}
-
-void __init
-sycamore_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(SYCAMORE_RTC_VADDR,
-			 SYCAMORE_RTC_PADDR, SYCAMORE_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = sycamore_setup_arch;
-	ppc_md.setup_io_mappings = sycamore_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
deleted file mode 100644
index 69b169eac053..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Sycamore board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Armin Kuster <akuster@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SYCAMORE_H__
-#define __ASM_SYCAMORE_H__
-
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define SYCAMORE_RTC_PADDR	((uint)0xf0000000)
-#define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE	((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define SYCAMORE_PS2_BASE	0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Sycamore"
-
-#endif /* __ASM_SYCAMORE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
deleted file mode 100644
index 115694275083..000000000000
--- a/arch/ppc/platforms/4xx/taishan.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.c
- *
- * AMCC Taishan board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * NOR FLASH configuration (using mtd physmap driver)
- */
-
-/* start will be added dynamically, end is always fixed */
-static struct resource taishan_nor_resource = {
-	.start = TAISHAN_FLASH_ADDR,
-	.end   = 0x1ffffffffULL,
-	.flags = IORESOURCE_MEM,
-};
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x180000
-#define RW_PART1_SZ	0x200000
-/* Partition 2 will be autosized dynamically... */
-#define RW_PART3_SZ	0x80000
-#define RW_PART4_SZ	0x40000
-
-static struct mtd_partition taishan_nor_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "root",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART1_SZ,
-	},
-	{
-		.name = "user",
-		.offset = MTDPART_OFS_APPEND,
-/*		.size = RW_PART2_SZ */ /* will be adjusted dynamically */
-	},
-	{
-		.name = "env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART3_SZ,
-	},
-	{
-		.name = "u-boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART4_SZ,
-	}
-};
-
-static struct physmap_flash_data taishan_nor_data = {
-	.width		= 4,
-	.parts		= taishan_nor_parts,
-	.nr_parts	= ARRAY_SIZE(taishan_nor_parts),
-};
-
-static struct platform_device taishan_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &taishan_nor_data,
-		},
-	.num_resources	= 1,
-	.resource	= &taishan_nor_resource,
-};
-
-static int taishan_setup_flash(void)
-{
-	/*
-	 * Adjust partition 2 to flash size
-	 */
-	taishan_nor_parts[2].size = __res.bi_flashsize -
-		RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ;
-
-	platform_device_register(&taishan_nor_device);
-
-	return 0;
-}
-arch_initcall(taishan_setup_flash);
-
-static void __init
-taishan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = TAISHAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-taishan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 24, 25, 26 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 25, 26, 23 },	/* IDSEL 2 - PCI Slot 1 */
-	};
-
-	const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init taishan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=2; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		} else {
-			emacdata->phy_map = 0x00000001; /* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-taishan_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-	PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-	iounmap(pcix_reg_base);
-
-	eieio();
-}
-
-static void __init
-taishan_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	taishan_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			TAISHAN_PCI_LOWER_IO,
-			TAISHAN_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			TAISHAN_PCI_LOWER_MEM,
-			TAISHAN_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = TAISHAN_PCI_LOWER_IO;
-	hose->io_space.end = TAISHAN_PCI_UPPER_IO;
-	hose->mem_space.start = TAISHAN_PCI_LOWER_MEM;
-	hose->mem_space.end = TAISHAN_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			TAISHAN_PCI_CFGA_PLB32,
-			TAISHAN_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = taishan_map_irq;
-}
-
-
-static void __init
-taishan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-taishan_setup_arch(void)
-{
-	taishan_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	taishan_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	taishan_early_serial_map();
-
-	/* Identify the system */
-	printk("AMCC PowerPC 440GX Taishan Platform\n");
-}
-
-static void __init taishan_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = taishan_setup_arch;
-	ppc_md.show_cpuinfo = taishan_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = taishan_calibrate_decr;
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = taishan_early_serial_map;
-#endif
-	ppc_md.init = taishan_init;
-}
-
diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h
deleted file mode 100644
index ea7561a80457..000000000000
--- a/arch/ppc/platforms/4xx/taishan.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.h
- *
- * AMCC Taishan board definitions
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_TAISHAN_H__
-#define __ASM_TAISHAN_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* External timer clock frequency */
-#define TAISHAN_TMR_CLK	25000000
-
-/* Flash */
-#define TAISHAN_FPGA_ADDR		0x0000000141000000ULL
-#define TAISHAN_LCM_ADDR		0x0000000142000000ULL
-#define TAISHAN_FLASH_ADDR		0x00000001fc000000ULL
-#define TAISHAN_FLASH_SIZE		0x4000000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define TAISHAN_PCI_LOWER_IO	0x00000000
-#define TAISHAN_PCI_UPPER_IO	0x0000ffff
-#define TAISHAN_PCI_LOWER_MEM	0x80000000
-#define TAISHAN_PCI_UPPER_MEM	0xffffefff
-
-#define TAISHAN_PCI_CFGA_PLB32	0x0ec00000
-#define TAISHAN_PCI_CFGD_PLB32	0x0ec00004
-
-#define TAISHAN_PCI_IO_BASE	0x0000000208000000ULL
-#define TAISHAN_PCI_IO_SIZE	0x00010000
-#define TAISHAN_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_TAISHAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
deleted file mode 100644
index 738280420be5..000000000000
--- a/arch/ppc/platforms/4xx/virtex.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Basic Virtex platform defines, included by <asm/ibm4xx.h>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEX_H__
-#define __ASM_VIRTEX_H__
-
-#include <asm/ibm405.h>
-#include <asm/ppcboot.h>
-
-/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
-#if !defined(BASE_BAUD)
- #define BASE_BAUD		(0) /* dummy value; not used */
-#endif
-
-#ifndef __ASSEMBLY__
-extern const char* virtex_machine_name;
-#define PPC4xx_MACHINE_NAME (virtex_machine_name)
-#endif /* !__ASSEMBLY__ */
-
-/* We don't need anything mapped.  Size of zero will accomplish that. */
-#define PPC4xx_ONB_IO_PADDR	0u
-#define PPC4xx_ONB_IO_VADDR	0u
-#define PPC4xx_ONB_IO_SIZE	0u
-
-#endif				/* __ASM_VIRTEX_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
deleted file mode 100644
index 2f9772340854..000000000000
--- a/arch/ppc/platforms/4xx/walnut.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *walnut_rtc_base;
-
-/* Some IRQs unique to Walnut.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-walnut_setup_arch(void)
-{
-
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(WALNUT_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the walnut */
-	walnut_rtc_base = (void *) WALNUT_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base,
-		  walnut_rtc_base, 8);
-	/* Identify the system */
-	printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end work around */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-walnut_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(WALNUT_RTC_VADDR,
-			 WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = walnut_setup_arch;
-	ppc_md.setup_io_mappings = walnut_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
deleted file mode 100644
index d9c4eb788940..000000000000
--- a/arch/ppc/platforms/4xx/walnut.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Walnut board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *	Frank Rowand <frank_rowand@mvista.com>
- *	Debbie Chu <debbie_chu@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_WALNUT_H__
-#define __ASM_WALNUT_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Walnut" 405GP evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define WALNUT_RTC_PADDR	((uint)0xf0000000)
-#define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR
-#define WALNUT_RTC_SIZE		((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define WALNUT_PS2_BASE		0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE
-
-#define PPC4xx_MACHINE_NAME	"IBM Walnut"
-
-#endif /* __ASM_WALNUT_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
deleted file mode 100644
index 6e522fefc26f..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Xilinx ML300 evaluation board initialization
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml300_map_io, ml300_setup_arch and ml300_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml300_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml300_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml300_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML300 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml300_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml300_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML300 Reference System (Virtex-II Pro)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml300_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml300_setup_arch;
-	ppc_md.setup_io_mappings = ml300_map_io;
-	ppc_md.init_IRQ = ml300_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
deleted file mode 100644
index bc3ace3762e7..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml403.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Xilinx ML403 evaluation board initialization
- *
- * Author: Grant Likely <grant.likely@secretlab.ca>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml403_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml403_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml403_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML403 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml403_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml403_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml403_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml403_setup_arch;
-	ppc_md.setup_io_mappings = ml403_map_io;
-	ppc_md.init_IRQ = ml403_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
deleted file mode 100644
index 650888b00fb0..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/xparameters/xparameters.h
- *
- * This file includes the correct xparameters.h for the CONFIG'ed board plus
- * fixups to translate board specific XPAR values to a common set of names
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-
-#if defined(CONFIG_XILINX_ML300)
-  #include "xparameters_ml300.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#elif defined(CONFIG_XILINX_ML403)
-  #include "xparameters_ml403.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#else
-  /* Add other board xparameter includes here before the #else */
-  #error No xparameters_*.h file included
-#endif
-
-#ifndef SERIAL_PORT_DFNS
-  /* zImage serial port definitions */
-  #define RS_TABLE_SIZE 1
-  #define SERIAL_PORT_DFNS {						\
-	.baud_base	 = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16,		\
-	.irq		 = XPAR_INTC_0_UARTNS550_0_VEC_ID,		\
-	.flags		 = ASYNC_BOOT_AUTOCONF,				\
-	.iomem_base	 = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3,		\
-	.iomem_reg_shift = 2,						\
-	.io_type	 = SERIAL_IO_MEM,				\
-  },
-#endif
-
-/*
- * A few reasonable defaults for the #defines which could be missing depending
- * on the IP version or variant (e.g. OPB vs PLB)
- */
-
-#ifndef XPAR_EMAC_0_CAM_EXIST
-#define XPAR_EMAC_0_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_JUMBO_EXIST
-#define XPAR_EMAC_0_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_TX_DRE_TYPE
-#define XPAR_EMAC_0_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_RX_DRE_TYPE
-#define XPAR_EMAC_0_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM
-#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM
-#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_EMAC_1_CAM_EXIST
-#define XPAR_EMAC_1_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_JUMBO_EXIST
-#define XPAR_EMAC_1_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_TX_DRE_TYPE
-#define XPAR_EMAC_1_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_RX_DRE_TYPE
-#define XPAR_EMAC_1_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM
-#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM
-#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_GPIO_0_IS_DUAL
-#define XPAR_GPIO_0_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_1_IS_DUAL
-#define XPAR_GPIO_1_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_2_IS_DUAL
-#define XPAR_GPIO_2_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_3_IS_DUAL
-#define XPAR_GPIO_3_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_4_IS_DUAL
-#define XPAR_GPIO_4_IS_DUAL 0
-#endif
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
deleted file mode 100644
index 97e3f4d4bd54..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*******************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_DCR_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_DCR_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_DCR_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_UARTNS550_1_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_SPI_0_VEC_ID XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_TOUCHSCREEN_0_VEC_ID XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_A XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_B XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_C XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_D XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SPI_0_BASEADDR XPAR_OPB_SPI_0_BASEADDR
-#define XPAR_SPI_0_HIGHADDR XPAR_OPB_SPI_0_HIGHADDR
-#define XPAR_SPI_0_DEVICE_ID XPAR_OPB_SPI_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TOUCHSCREEN_0_BASEADDR XPAR_OPB_TSD_REF_0_BASEADDR
-#define XPAR_TOUCHSCREEN_0_HIGHADDR XPAR_OPB_TSD_REF_0_HIGHADDR
-#define XPAR_TOUCHSCREEN_0_DEVICE_ID XPAR_OPB_TSD_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_PCI_0_BASEADDR XPAR_OPB_PCI_REF_0_BASEADDR
-#define XPAR_PCI_0_HIGHADDR XPAR_OPB_PCI_REF_0_HIGHADDR
-#define XPAR_PCI_0_CONFIG_ADDR XPAR_OPB_PCI_REF_0_CONFIG_ADDR
-#define XPAR_PCI_0_CONFIG_DATA XPAR_OPB_PCI_REF_0_CONFIG_DATA
-#define XPAR_PCI_0_LCONFIG_ADDR XPAR_OPB_PCI_REF_0_LCONFIG_ADDR
-#define XPAR_PCI_0_MEM_BASEADDR XPAR_OPB_PCI_REF_0_MEM_BASEADDR
-#define XPAR_PCI_0_MEM_HIGHADDR XPAR_OPB_PCI_REF_0_MEM_HIGHADDR
-#define XPAR_PCI_0_IO_BASEADDR XPAR_OPB_PCI_REF_0_IO_BASEADDR
-#define XPAR_PCI_0_IO_HIGHADDR XPAR_OPB_PCI_REF_0_IO_HIGHADDR
-#define XPAR_PCI_0_CLOCK_FREQ_HZ XPAR_XPCI_CLOCK_HZ
-#define XPAR_PCI_0_DEVICE_ID XPAR_OPB_PCI_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x08000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_POWER_0_POWERDOWN_BASEADDR 0x90000004
-#define XPAR_POWER_0_POWERDOWN_HIGHADDR 0x90000007
-#define XPAR_POWER_0_POWERDOWN_VALUE 0xFF
-
-/******************************************************************/
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
deleted file mode 100644
index 5cacdcb3964d..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
+++ /dev/null
@@ -1,243 +0,0 @@
-
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1
-* DO NOT EDIT.
-*
-* Copyright (c) 2005 Xilinx, Inc.  All rights reserved. 
-* 
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000
-#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
-
-/******************************************************************/
-
-#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000
-#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF
-#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000
-#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000
-#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF
-#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 1
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XGPIO_NUM_INSTANCES 3
-#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
-#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
-#define XPAR_OPB_GPIO_0_DEVICE_ID 0
-#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000
-#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF
-#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000
-#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF
-#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2
-#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-#define XPAR_OPB_IIC_0_GPO_WIDTH 1
-
-/******************************************************************/
-
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0
-#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF
-#define XPAR_OPB_INTC_0_DEVICE_ID 0
-#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
-
-/******************************************************************/
-
-#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0
-#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF
-#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001
-#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0
-#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002
-#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1
-#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004
-#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2
-#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008
-#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5
-#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040
-#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200
-#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 16
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1
-#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0
-#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0
-#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0
-#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1
-#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1
-#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1
-#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR
-#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR
-#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x4000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_PCI_0_CLOCK_FREQ_HZ    0
-
-/******************************************************************/
-
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
deleted file mode 100644
index f6cfd44281fc..000000000000
--- a/arch/ppc/platforms/4xx/yucca.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * Yucca board specific routines
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-#include <syslib/ppc440spe_pcie.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-yucca_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = YUCCA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-yucca_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
-
-	return 0;
-}
-
-static enum {
-	HOSE_UNKNOWN,
-	HOSE_PCIX,
-	HOSE_PCIE0,
-	HOSE_PCIE1,
-	HOSE_PCIE2
-} hose_type[4];
-
-static inline int
-yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose_type[hose->index] == HOSE_PCIX) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 96, 97, 98, 99 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 100, 101, 102, 103 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE2) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 104, 105, 106, 107 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init yucca_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-static int __init yucca_pcie_card_present(int port)
-{
-   void __iomem *pcie_fpga_base;
-   u16 reg;
-
-   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
-   iounmap(pcie_fpga_base);
-
-   switch(port) {
-   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
-   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
-   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
-   default: return 0;
-   }
-}
-
-/*
- * For the given slot, set rootpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * and turn off reset.
- */
-static void __init yucca_setup_pcie_fpga_rootpoint(int port)
-{
-	void __iomem *pcie_reg_fpga_base;
-	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
-
-	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-
-	switch(port) {
-	case 0:
-		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
-		endpoint    = 0;
-		power 	    = FPGA_REG1A_PE0_PWRON;
-		green_led   = FPGA_REG1A_PE0_GLED;
-		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE0_YLED;
-		reset_off   = FPGA_REG1C_PE0_PERST;
-		break;
-	case 1:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
-		power 	    = FPGA_REG1A_PE1_PWRON;
-		green_led   = FPGA_REG1A_PE1_GLED;
-		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE1_YLED;
-		reset_off   = FPGA_REG1C_PE1_PERST;
-		break;
-	case 2:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
-		power 	    = FPGA_REG1A_PE2_PWRON;
-		green_led   = FPGA_REG1A_PE2_GLED;
-		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE2_YLED;
-		reset_off   = FPGA_REG1C_PE2_PERST;
-		break;
-
-	default:
-		iounmap(pcie_reg_fpga_base);
-		return;
-	}
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
-		 ~(power | clock | green_led) &
-		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 ~(endpoint | reset_off) &
-		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
-
-	/*
-	 * Leave device in reset for a while after powering on the
-	 * slot to give it a chance to initialize.
-	 */
-	mdelay(250);
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
-
-	iounmap(pcie_reg_fpga_base);
-}
-
-static void __init
-yucca_setup_hoses(void)
-{
-	struct pci_controller *hose;
-	char name[20];
-	int i;
-
-	if (0 && ppc440spe_init_pcie()) {
-		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
-		return;
-	}
-
-	for (i = 0; i <= 2; ++i) {
-		if (!yucca_pcie_card_present(i))
-			continue;
-
-		printk(KERN_INFO "PCIE%d: card present\n", i);
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
-			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
-			continue;
-		}
-
-		hose = pcibios_alloc_controller();
-		if (!hose)
-			return;
-
-		sprintf(name, "PCIE%d host bridge", i);
-		pci_init_resource(&hose->io_resource,
-				  YUCCA_PCIX_LOWER_IO,
-				  YUCCA_PCIX_UPPER_IO,
-				  IORESOURCE_IO,
-				  name);
-
-		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
-			i * YUCCA_PCIE_MEM_SIZE;
-		hose->mem_space.end   = hose->mem_space.start +
-			YUCCA_PCIE_MEM_SIZE - 1;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  hose->mem_space.start,
-				  hose->mem_space.end,
-				  IORESOURCE_MEM,
-				  name);
-
-		hose->first_busno = 0;
-		hose->last_busno  = 15;
-		hose_type[hose->index] = HOSE_PCIE0 + i;
-
-		ppc440spe_setup_pcie(hose, i);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = yucca_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-yucca_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-yucca_setup_arch(void)
-{
-	yucca_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SPe clocking is the same - rd */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	yucca_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	yucca_early_serial_map();
-
-	/* Identify the system */
-	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = yucca_setup_arch;
-	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = yucca_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = yucca_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
deleted file mode 100644
index bc9684e66a84..000000000000
--- a/arch/ppc/platforms/4xx/yucca.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Yucca board definitions
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_YUCCA_H__
-#define __ASM_YUCCA_H__
-
-#include <platforms/4xx/ppc440spe.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define YUCCA_TMR_CLK		25000000
-
-/*
- * FPGA registers
- */
-#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
-#define YUCCA_FPGA_REG_SIZE			0x24
-
-#define FPGA_REG1A				0x1a
-
-#define FPGA_REG1A_PE0_GLED			0x8000
-#define FPGA_REG1A_PE1_GLED			0x4000
-#define FPGA_REG1A_PE2_GLED			0x2000
-#define FPGA_REG1A_PE0_YLED			0x1000
-#define FPGA_REG1A_PE1_YLED			0x0800
-#define FPGA_REG1A_PE2_YLED			0x0400
-#define FPGA_REG1A_PE0_PWRON			0x0200
-#define FPGA_REG1A_PE1_PWRON			0x0100
-#define FPGA_REG1A_PE2_PWRON			0x0080
-#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
-#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
-#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
-#define FPGA_REG1A_PE_SPREAD0			0x0008
-#define FPGA_REG1A_PE_SPREAD1			0x0004
-#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
-#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
-
-#define FPGA_REG1C				0x1c
-
-#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
-#define FPGA_REG1C_PE1_ENDPOINT			0x4000
-#define FPGA_REG1C_PE2_ENDPOINT			0x2000
-#define FPGA_REG1C_PE0_PRSNT			0x1000
-#define FPGA_REG1C_PE1_PRSNT			0x0800
-#define FPGA_REG1C_PE2_PRSNT			0x0400
-#define FPGA_REG1C_PE0_WAKE			0x0080
-#define FPGA_REG1C_PE1_WAKE			0x0040
-#define FPGA_REG1C_PE2_WAKE			0x0020
-#define FPGA_REG1C_PE0_PERST			0x0010
-#define FPGA_REG1C_PE1_PERST			0x0008
-#define FPGA_REG1C_PE2_PERST			0x0004
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define YUCCA_PCIX_LOWER_IO	0x00000000
-#define YUCCA_PCIX_UPPER_IO	0x0000ffff
-#define YUCCA_PCIX_LOWER_MEM	0x80000000
-#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
-#define YUCCA_PCIE_LOWER_MEM	0x90000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-
-#define YUCCA_PCIX_MEM_SIZE	0x10000000
-#define YUCCA_PCIX_MEM_OFFSET	0x00000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-#define YUCCA_PCIE_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_YUCCA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
deleted file mode 100644
index 6260231987cb..000000000000
--- a/arch/ppc/platforms/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
-obj-$(CONFIG_PREP_RESIDUAL)	+= residual.o
-obj-$(CONFIG_TQM8260)		+= tqm8260_setup.o
-obj-$(CONFIG_CPCI690)		+= cpci690.o
-obj-$(CONFIG_EV64260)		+= ev64260.o
-obj-$(CONFIG_CHESTNUT)		+= chestnut.o
-obj-$(CONFIG_LOPEC)		+= lopec.o
-obj-$(CONFIG_KATANA)		+= katana.o
-obj-$(CONFIG_HDPU)		+= hdpu.o
-obj-$(CONFIG_MVME5100)		+= mvme5100.o
-obj-$(CONFIG_PAL4)		+= pal4_setup.o pal4_pci.o
-obj-$(CONFIG_POWERPMC250)	+= powerpmc250.o
-obj-$(CONFIG_PPLUS)		+= pplus.o
-obj-$(CONFIG_PRPMC750)		+= prpmc750.o
-obj-$(CONFIG_PRPMC800)		+= prpmc800.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= radstone_ppc7d.o
-obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
-obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
-obj-$(CONFIG_SPRUCE)		+= spruce.o
-obj-$(CONFIG_LITE5200)		+= lite5200.o
-obj-$(CONFIG_EV64360)		+= ev64360.o
diff --git a/arch/ppc/platforms/bseip.h b/arch/ppc/platforms/bseip.h
deleted file mode 100644
index 691f4a52b0a5..000000000000
--- a/arch/ppc/platforms/bseip.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Bright Star Engineering ip-Engine board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifndef __MACH_BSEIP_DEFS
-#define __MACH_BSEIP_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * All we need to get started is the IMMR.
- */
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#endif	/* !__ASSEMBLY__ */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif
diff --git a/arch/ppc/platforms/ccm.h b/arch/ppc/platforms/ccm.h
deleted file mode 100644
index 69000b1c7a4c..000000000000
--- a/arch/ppc/platforms/ccm.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens Card Controller Module specific definitions
- *
- * Copyright (C) 2001-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_CCM_H
-#define __MACH_CCM_H
-
-
-#include <asm/ppcboot.h>
-
-#define	CCM_IMMR_BASE    0xF0000000	/* phys. addr of IMMR			*/
-#define	CCM_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     CCM_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     CCM_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	DEC_INTERRUPT	11		/* = SIU_LEVEL5				*/
-#define	CPM_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_CCM_H */
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
deleted file mode 100644
index 27c140f218ed..000000000000
--- a/arch/ppc/platforms/chestnut.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Board setup routines for IBM Chestnut
- *
- * Author: <source@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/machdep.h>
-#include <asm/kgdb.h>
-#include <asm/bootinfo.h>
-#include <asm/mv64x60.h>
-#include <platforms/chestnut.h>
-
-static void __iomem *sram_base; /* Virtual addr of Internal SRAM */
-static void __iomem *cpld_base; /* Virtual addr of CPLD Regs */
-
-static mv64x60_handle_t	bh;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void mv64360_pcibios_fixup(mv64x60_handle_t *bh);
-
-#define CHESTNUT_PRESERVE_MASK (BIT(MV64x60_CPU2DEV_0_WIN) | \
-				BIT(MV64x60_CPU2DEV_1_WIN) | \
-				BIT(MV64x60_CPU2DEV_2_WIN) | \
-				BIT(MV64x60_CPU2DEV_3_WIN) | \
-				BIT(MV64x60_CPU2BOOT_WIN))
-/**************************************************************************
- * FUNCTION: chestnut_calibrate_decr
- *
- * DESCRIPTION: initialize decrementer interrupt frequency (used as system
- *              timer)
- *
- ****/
-static void __init
-chestnut_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = CHESTNUT_BUS_SPEED / 4;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-static int
-chestnut_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: 750FX/GX Eval Board (Chestnut/Buckeye)\n");
-
-	return 0;
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_find_end_of_memory
- *
- * DESCRIPTION: ppc_md memory size callback
- *
- ****/
-unsigned long __init
-chestnut_find_end_of_memory(void)
-{
-   	static int  mem_size = 0;
-
-   	if (mem_size == 0) {
-      		mem_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				MV64x60_TYPE_MV64460);
-   	}
-   	return mem_size;
-}
-
-#if defined(CONFIG_SERIAL_8250)
-static void __init
-chestnut_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.uartclk = BASE_BAUD * 16;
-	port.irq = UART0_INT;
-	port.flags = STD_COM_FLAGS | UPF_IOREMAP;
-	port.iotype = UPIO_MEM;
-	port.mapbase = CHESTNUT_UART0_IO_BASE;
-	port.regshift = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	port.line = 1;
-	port.irq = UART1_INT;
-	port.mapbase = CHESTNUT_UART1_IO_BASE;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_map_irq
- *
- * DESCRIPTION: 0 return since PCI IRQs not needed
- *
- ****/
-static int __init
-chestnut_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		{CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ,
-		 CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ},
-		{CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ,
-		 CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ},
-		{CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ,
-		 CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ},
-		{CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ,
-		 CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ},
-	};
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_bridge
- *
- * DESCRIPTION: initalize board-specific settings on the MV64360
- *
- ****/
-static void __init
-chestnut_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int i;
-
-   	if ( ppc_md.progress )
-		ppc_md.progress("chestnut_setup_bridge: enter", 0);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	/* setup only PCI bus 0 (bus 1 not used) */
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CHESTNUT_PCI0_IO_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CHESTNUT_PCI0_IO_PCI_ADDR;
-	si.pci_0.pci_io.size = CHESTNUT_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_mem[0].cpu_base = CHESTNUT_PCI0_MEM_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CHESTNUT_PCI0_MEM_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CHESTNUT_PCI0_MEM_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CHESTNUT_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-   	/* Lookup host bridge - on CPU 0 - no SMP support */
-   	if (mv64x60_init(&bh, &si)) {
-        	printk("\n\nPCI Bridge initialization failed!\n");
-   	}
-
-	pci_dram_offset = 0;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = chestnut_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-}
-
-void __init
-chestnut_setup_peripherals(void)
-{
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-			CHESTNUT_BOOT_8BIT_BASE, CHESTNUT_BOOT_8BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			CHESTNUT_32BIT_BASE, CHESTNUT_32BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	cpld_base = ioremap(CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-			CHESTNUT_UART_BASE, CHESTNUT_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-			CHESTNUT_FRAM_BASE, CHESTNUT_FRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-			CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#else
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-	sram_base = ioremap(CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-   	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/*
-	 * Configure MPP pins for PCI DMA
-	 *
-	 * PCI Slot	GNT pin		REQ pin
-	 *	0	MPP16		MPP17
-	 *	1	MPP18		MPP19
-	 *	2	MPP20		MPP21
-	 *	3	MPP22		MPP23
-	 */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2,
-			(0x1 << 0)  |	/* MPPSel16 PCI0_GNT[0] */
-			(0x1 << 4)  |	/* MPPSel17 PCI0_REQ[0] */
-			(0x1 << 8)  |	/* MPPSel18 PCI0_GNT[1] */
-			(0x1 << 12) |	/* MPPSel19 PCI0_REQ[1] */
-			(0x1 << 16) |	/* MPPSel20 PCI0_GNT[2] */
-			(0x1 << 20) |	/* MPPSel21 PCI0_REQ[2] */
-			(0x1 << 24) |	/* MPPSel22 PCI0_GNT[3] */
-			(0x1 << 28));	/* MPPSel23 PCI0_REQ[3] */
-	/*
-	 * Set unused MPP pins for output, as per schematic note
-	 *
-	 * Unused Pins: MPP01, MPP02, MPP04, MPP05, MPP06
-	 *		MPP09, MPP10, MPP13, MPP14, MPP15
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_0,
-			(0xf << 4)  |	/* MPPSel01 GPIO[1] */
-			(0xf << 8)  |	/* MPPSel02 GPIO[2] */
-			(0xf << 16) |	/* MPPSel04 GPIO[4] */
-			(0xf << 20) |	/* MPPSel05 GPIO[5] */
-			(0xf << 24));	/* MPPSel06 GPIO[6] */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1,
-			(0xf << 4)  |	/* MPPSel09 GPIO[9] */
-			(0xf << 8)  |	/* MPPSel10 GPIO[10] */
-			(0xf << 20) |	/* MPPSel13 GPIO[13] */
-			(0xf << 24) |	/* MPPSel14 GPIO[14] */
-			(0xf << 28));	/* MPPSel15 GPIO[15] */
-	mv64x60_set_bits(&bh, MV64x60_GPP_IO_CNTL, /* Output */
-			BIT(1)  | BIT(2)  | BIT(4)  | BIT(5)  | BIT(6)  |
-			BIT(9)  | BIT(10) | BIT(13) | BIT(14) | BIT(15));
-
-   	/*
-    	 * Configure the following MPP pins to indicate a level
-    	 * triggered interrupt
-    	 *
-       	 * MPP24 - Board Reset (just map the MPP & GPP for chestnut_reset)
-       	 * MPP25 - UART A  (high)
-       	 * MPP26 - UART B  (high)
-	 * MPP28 - PCI Slot 3 (low)
-	 * MPP29 - PCI Slot 2 (low)
-	 * MPP30 - PCI Slot 1 (low)
-	 * MPP31 - PCI Slot 0 (low)
-    	 */
-        mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3,
-                        BIT(3) | BIT(2) | BIT(1) | BIT(0)	 | /* MPP 24 */
-                        BIT(7) | BIT(6) | BIT(5) | BIT(4)	 | /* MPP 25 */
-                        BIT(11) | BIT(10) | BIT(9) | BIT(8)	 | /* MPP 26 */
-			BIT(19) | BIT(18) | BIT(17) | BIT(16)	 | /* MPP 28 */
-			BIT(23) | BIT(22) | BIT(21) | BIT(20)	 | /* MPP 29 */
-			BIT(27) | BIT(26) | BIT(25) | BIT(24)	 | /* MPP 30 */
-			BIT(31) | BIT(30) | BIT(29) | BIT(28));    /* MPP 31 */
-
-   	/*
-	 * Define GPP 25 (high), 26 (high), 28 (low), 29 (low), 30 (low),
-	 * 31 (low) interrupt polarity input signal and level triggered
-    	 */
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_LEVEL_CNTL, BIT(25) | BIT(26));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL,
-			BIT(28) | BIT(29) | BIT(30) | BIT(31));
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/* Config GPP interrupt controller to respond to level trigger */
-   	mv64x60_set_bits(&bh, MV64360_COMM_ARBITER_CNTL, BIT(10));
-
-   	/*
-    	 * Dismiss and then enable interrupt on GPP interrupt cause for CPU #0
-    	 */
-   	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE,
-			~(BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			  BIT(31)));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/*
-    	 * Dismiss and then enable interrupt on CPU #0 high cause register
-    	 * BIT27 summarizes GPP interrupts 24-31
-    	 */
-   	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, BIT(27));
-
-   	if (ppc_md.progress)
-		ppc_md.progress("chestnut_setup_bridge: exit", 0);
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_arch
- *
- * DESCRIPTION: ppc_md machine configuration callback
- *
- ****/
-static void __init
-chestnut_setup_arch(void)
-{
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-   	/* if the time base value is greater than bus freq/4 (the TB and
-    	* decrementer tick rate) + signed integer rollover value, we
-    	* can spend a fair amount of time waiting for the rollover to
-    	* happen.  To get around this, initialize the time base register
-    	* to a "safe" value.
-    	*/
-   	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-   	/*
-    	* Set up the L2CR register.
-    	*/
- 	_set_L2CR(_get_L2CR() | L2CR_L2E);
-
-	chestnut_setup_bridge();
-	chestnut_setup_peripherals();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_SERIAL_8250)
-	chestnut_early_serial_map();
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM 750FX/GX Eval Board\n");
-	printk(KERN_INFO "IBM 750FX/GX port (C) 2004 MontaVista Software, Inc."
-		" (source@mvista.com)\n");
-
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: exit", 0);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition ptbl;
-
-static int __init
-chestnut_setup_mtd(void)
-{
-	memset(&ptbl, 0, sizeof(ptbl));
-
-	ptbl.name = "User FS";
-	ptbl.size = CHESTNUT_32BIT_SIZE;
-
-	physmap_map.size = CHESTNUT_32BIT_SIZE;
-	physmap_set_partitions(&ptbl, 1);
-	return 0;
-}
-
-arch_initcall(chestnut_setup_mtd);
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_restart
- *
- * DESCRIPTION: ppc_md machine reset callback
- *              reset the board via the CPLD command register
- *
- ****/
-static void
-chestnut_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	local_irq_disable();
-
-        /*
-         * Set CPLD Reg 3 bit 0 to 1 to allow MPP signals on reset to work
-         *
-         * MPP24 - board reset
-         */
-   	writeb(0x1, cpld_base + 3);
-
-	/* GPP pin tied to MPP earlier */
-        mv64x60_set_bits(&bh, MV64x60_GPP_VALUE_SET, BIT(24));
-
-   	while (i-- > 0);
-   	panic("restart failed\n");
-}
-
-static void
-chestnut_halt(void)
-{
-	local_irq_disable();
-	for (;;);
-	/* NOTREACHED */
-}
-
-static void
-chestnut_power_off(void)
-{
-	chestnut_halt();
-	/* NOTREACHED */
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_map_io
- *
- * DESCRIPTION: configure fixed memory-mapped IO
- *
- ****/
-static void __init
-chestnut_map_io(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	io_block_mapping(CHESTNUT_UART_BASE, CHESTNUT_UART_BASE, 0x100000,
-		_PAGE_IO);
-#endif
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_set_bat
- *
- * DESCRIPTION: configures a (temporary) bat mapping for early access to
- *              device I/O
- *
- ****/
-static __inline__ void
-chestnut_set_bat(void)
-{
-        mb();
-        mtspr(SPRN_DBAT3U, 0xf0001ffe);
-        mtspr(SPRN_DBAT3L, 0xf000002a);
-        mb();
-}
-
-/**************************************************************************
- * FUNCTION: platform_init
- *
- * DESCRIPTION: main entry point for configuring board-specific machine
- *              callbacks
- *
- ****/
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-        /* Copy the kernel command line arguments to a safe place. */
-
-        if (r6) {
-                *(char *) (r7 + KERNELBASE) = 0;
-                strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-        }
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = chestnut_setup_arch;
-	ppc_md.show_cpuinfo = chestnut_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.init = NULL;
-
-	ppc_md.find_end_of_memory = chestnut_find_end_of_memory;
-	ppc_md.setup_io_mappings  = chestnut_map_io;
-
-	ppc_md.restart = chestnut_restart;
-   	ppc_md.power_off = chestnut_power_off;
-   	ppc_md.halt = chestnut_halt;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = chestnut_calibrate_decr;
-
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = NULL;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	chestnut_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	if (ppc_md.progress)
-                ppc_md.progress("chestnut_init(): exit", 0);
-}
diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h
deleted file mode 100644
index e00fd9f8bbd0..000000000000
--- a/arch/ppc/platforms/chestnut.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Definitions for IBM 750FXGX Eval (Chestnut)
- *
- * Author: <source@mvista.com>
- *
- * Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com>
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in
- * only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to
- * implement at 0xf1000000 only at this time
- *
- *    0xfff00000-0xffffffff      - 8 Flash
- *    0xffe00000-0xffefffff      - BOOT SRAM
- *    0xffd00000-0xffd00004      - CPLD
- *    0xffc00000-0xffc0000f      - UART
- *    0xffb00000-0xffb07fff      - FRAM
- *    0xff840000-0xffafffff      - *** HOLE ***
- *    0xff800000-0xff83ffff      - MV64460 Integrated SRAM
- *    0xfe000000-0xff8fffff      - *** HOLE ***
- *    0xfc000000-0xfdffffff      - 32bit Flash
- *    0xf1010000-0xfbffffff      - *** HOLE ***
- *    0xf1000000-0xf100ffff      - MV64460 Registers
- */
-
-#ifndef __PPC_PLATFORMS_CHESTNUT_H__
-#define __PPC_PLATFORMS_CHESTNUT_H__
-
-#define CHESTNUT_BOOT_8BIT_BASE			0xfff00000
-#define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_BOOT_SRAM_BASE			0xffe00000
-#define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_CPLD_BASE			0xffd00000
-#define CHESTNUT_CPLD_SIZE_ACTUAL		5
-#define CHESTNUT_CPLD_REG3			(CHESTNUT_CPLD_BASE+3)
-#define CHESTNUT_UART_BASE			0xffc00000
-#define CHESTNUT_UART_SIZE_ACTUAL		16
-#define CHESTNUT_FRAM_BASE			0xffb00000
-#define CHESTNUT_FRAM_SIZE_ACTUAL		(32*1024)
-#define CHESTNUT_INTERNAL_SRAM_BASE		0xff800000
-#define CHESTNUT_32BIT_BASE			0xfc000000
-#define CHESTNUT_32BIT_SIZE			(32*1024*1024)
-
-#define CHESTNUT_BOOT_8BIT_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_8BIT_SIZE_ACTUAL)
-#define CHESTNUT_BOOT_SRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_SRAM_SIZE_ACTUAL)
-#define CHESTNUT_CPLD_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_CPLD_SIZE_ACTUAL)
-#define CHESTNUT_UART_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_UART_SIZE_ACTUAL)
-#define CHESTNUT_FRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_FRAM_SIZE_ACTUAL)
-
-#define CHESTNUT_BUS_SPEED		200000000
-#define CHESTNUT_PIBS_DATABASE		0xf0000 /* from PIBS src code */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define CHESTNUT_ETH_TX_QUEUE_SIZE		800
-#define CHESTNUT_ETH_RX_QUEUE_SIZE		400
-
-/*
- * PCI windows
- */
-
-#define CHESTNUT_PCI0_MEM_PROC_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_PCI_HI_ADDR	0x00000000
-#define CHESTNUT_PCI0_MEM_PCI_LO_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_SIZE		0x10000000
-#define CHESTNUT_PCI0_IO_PROC_ADDR	0xa0000000
-#define CHESTNUT_PCI0_IO_PCI_ADDR	0x00000000
-#define CHESTNUT_PCI0_IO_SIZE		0x01000000
-
-/*
- * Board-specific IRQ info
- */
-#define CHESTNUT_PCI_SLOT0_IRQ	(64 + 31)
-#define CHESTNUT_PCI_SLOT1_IRQ	(64 + 30)
-#define CHESTNUT_PCI_SLOT2_IRQ	(64 + 29)
-#define CHESTNUT_PCI_SLOT3_IRQ	(64 + 28)
-
-/* serial port definitions */
-#define CHESTNUT_UART0_IO_BASE  (CHESTNUT_UART_BASE + 8)
-#define CHESTNUT_UART1_IO_BASE  CHESTNUT_UART_BASE
-
-#define UART0_INT           	(64 + 25)
-#define UART1_INT        	(64 + 26)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
-
-/* Rate for the 3.6864 Mhz clock for the onboard serial chip */
-#define BASE_BAUD 		(3686400 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define STD_UART_OP(num)						\
-        { 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS,		\
-                iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-
-#endif /* __PPC_PLATFORMS_CHESTNUT_H__ */
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
deleted file mode 100644
index 07f672d58767..000000000000
--- a/arch/ppc/platforms/cpci690.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Board setup routines for the Force CPCI690 board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This programr
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-#include <asm/mv64x60.h>
-#include <platforms/cpci690.h>
-
-#define BOARD_VENDOR	"Force"
-#define BOARD_MACHINE	"CPCI690"
-
-/* Set IDE controllers into Native mode? */
-#define SET_PCI_IDE_NATIVE
-
-static struct mv64x60_handle	bh;
-static void __iomem *cpci690_br_base;
-
-TODC_ALLOC();
-
-static int __init
-cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 90, 91, 88, 89 }, /* IDSEL 30/20 - Sentinel */
-		};
-
-		const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 93, 94, 95, 92 }, /* IDSEL 28/18 - PMC slot 2 */
-			{  0,  0,  0,  0 }, /* IDSEL 29/19 - Not used */
-			{ 94, 95, 92, 93 }, /* IDSEL 30/20 - PMC slot 1 */
-		};
-
-		const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-#define	GB	(1024UL * 1024UL * 1024UL)
-
-static u32
-cpci690_get_bus_freq(void)
-{
-	if (boot_mem_size >= (1*GB)) /* bus speed based on mem size */
-		return 100000000;
-	else
-		return 133333333;
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-cpci690_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return cpci690_get_bus_freq() * cpu_750xx[pll_cfg]/2;
-}
-
-static void __init
-cpci690_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = cpci690_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-}
-
-static void __init
-cpci690_setup_peripherals(void)
-{
-	/* Set up windows to CPLD, RTC/TODC, IPMI. */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
-		CPCI690_BR_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	cpci690_br_base = ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
-		CPCI690_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
-			ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
-		CPCI690_IPMI_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
-		 (1<<28) | (1<<29) | (1<<30) | (1<<31))
-	/* PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Route MPP interrupt inputs to GPP */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
-}
-
-static void __init
-cpci690_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
-
-	cpci690_setup_bridge();		/* set up PCI bridge(s) */
-	cpci690_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
-
-	printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-cpci690_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = CPCI690_MPSC_BAUD;
-	pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = cpci690_get_bus_freq();
-}
-
-static int
-cpci690_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", cpci690_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", cpci690_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-cpci690_reset_board(void)
-{
-	u32	i = 10000;
-
-	local_irq_disable();
-	out_8((cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
-
-	while (i != 0) i++;
-	panic("restart failed\n");
-}
-
-static void
-cpci690_restart(char *cmd)
-{
-	cpci690_reset_board();
-}
-
-static void
-cpci690_halt(void)
-{
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-cpci690_power_off(void)
-{
-	cpci690_halt();
-	/* NOTREACHED */
-}
-
-static int
-cpci690_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu MHz\t\t: %d\n",
-		(cpci690_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus MHz\t\t: %d\n",
-		(cpci690_get_bus_freq() + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "FPGA Revision\t: %d\n",
-		in_8(cpci690_br_base + CPCI690_BR_MEM_CTLR) >> 5);
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-cpci690_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = cpci690_get_bus_freq() / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-static void __init
-cpci690_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
-		128 * 1024, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = cpci690_setup_arch;
-	ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-	ppc_md.restart = cpci690_restart;
-	ppc_md.power_off = cpci690_power_off;
-	ppc_md.halt = cpci690_halt;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = cpci690_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-	ppc_md.setup_io_mappings = cpci690_map_io;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#endif	/* defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) */
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = cpci690_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h
deleted file mode 100644
index 0fa5a4c31b67..000000000000
--- a/arch/ppc/platforms/cpci690.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Definitions for Force CPCI690
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The GT64260 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- */
-
-#ifndef __PPC_PLATFORMS_CPCI690_H
-#define __PPC_PLATFORMS_CPCI690_H
-
-/*
- * Define bd_t to pass in the MAC addresses used by the GT64260's enet ctlrs.
- */
-#define	CPCI690_BI_MAGIC		0xFE8765DC
-
-typedef struct board_info {
-	u32	bi_magic;
-	u8	bi_enetaddr[3][6];
-} bd_t;
-
-/* PCI bus Resource setup */
-#define CPCI690_PCI0_MEM_START_PROC_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI0_MEM_START_PCI_LO_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_SIZE			0x10000000
-#define CPCI690_PCI0_IO_START_PROC_ADDR		0xa0000000
-#define CPCI690_PCI0_IO_START_PCI_ADDR		0x00000000
-#define CPCI690_PCI0_IO_SIZE			0x01000000
-
-#define CPCI690_PCI1_MEM_START_PROC_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI1_MEM_START_PCI_LO_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_SIZE			0x10000000
-#define CPCI690_PCI1_IO_START_PROC_ADDR		0xa1000000
-#define CPCI690_PCI1_IO_START_PCI_ADDR		0x01000000
-#define CPCI690_PCI1_IO_SIZE			0x01000000
-
-/* Board Registers */
-#define	CPCI690_BR_BASE				0xf0000000
-#define	CPCI690_BR_SIZE_ACTUAL			0x8
-#define	CPCI690_BR_SIZE			max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_BR_SIZE_ACTUAL)
-#define	CPCI690_BR_LED_CNTL			0x00
-#define	CPCI690_BR_SW_RESET			0x01
-#define	CPCI690_BR_MISC_STATUS			0x02
-#define	CPCI690_BR_SWITCH_STATUS		0x03
-#define	CPCI690_BR_MEM_CTLR			0x04
-#define	CPCI690_BR_LAST_RESET_1			0x05
-#define	CPCI690_BR_LAST_RESET_2			0x06
-
-#define	CPCI690_TODC_BASE			0xf0100000
-#define	CPCI690_TODC_SIZE_ACTUAL		0x8000 /* Size or NVRAM + RTC */
-#define	CPCI690_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_TODC_SIZE_ACTUAL)
-#define	CPCI690_MAC_OFFSET			0x7c10 /* MAC in RTC NVRAM */
-
-#define	CPCI690_IPMI_BASE			0xf0200000
-#define	CPCI690_IPMI_SIZE_ACTUAL		0x10 /* 16 bytes of IPMI */
-#define	CPCI690_IPMI_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_IPMI_SIZE_ACTUAL)
-
-#define	CPCI690_MPSC_BAUD			9600
-#define	CPCI690_MPSC_CLK_SRC			8 /* TCLK */
-
-#endif /* __PPC_PLATFORMS_CPCI690_H */
diff --git a/arch/ppc/platforms/est8260.h b/arch/ppc/platforms/est8260.h
deleted file mode 100644
index adba68ecf57b..000000000000
--- a/arch/ppc/platforms/est8260.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Board information for the EST8260, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-#ifndef __EST8260_PLATFORM
-#define __EST8260_PLATFORM
-
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-
-#define BOOTROM_RESTART_ADDR	((uint)0xff000104)
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"EST Corporation"
-#define CPUINFO_MACHINE		"SBC8260 PowerPC"
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-#endif 	/* __EST8260_PLATFORM */
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
deleted file mode 100644
index f522b31c46d7..000000000000
--- a/arch/ppc/platforms/ev64260.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The EV-64260-BP port is the result of hard work from many people from
- * many companies.  In particular, employees of Marvell/Galileo, Mission
- * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
- *
- * Note: I have not been able to get *all* PCI slots to work reliably
- *	at 66 MHz.  I recommend setting jumpers J15 & J16 to short pins 1&2
- *	so that 33 MHz is used. --MAG
- * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
- * 	At 100MHz, they are solid.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/platform_device.h>
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#else
-#include <linux/mv643xx.h>
-#endif
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/mv64x60.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-
-#include <platforms/ev64260.h>
-
-#define BOARD_VENDOR	"Marvell/Galileo"
-#define BOARD_MACHINE	"EV-64260-BP"
-
-static struct mv64x60_handle	bh;
-
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-#endif
-
-static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
-	18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
-	{ 1, 15, 14,  2,  4, 13,  5,  9,  6, 11,  8, 10, 16, 12,  7,  0 },
-	{ 0, 30,  0,  2,  0, 26,  0, 18,  0, 22, 20, 24, 28, 32,  0,  0 }
-};
-
-
-TODC_ALLOC();
-
-static int
-ev64260_get_bus_speed(void)
-{
-	return 100000000;
-}
-
-static int
-ev64260_get_cpu_speed(void)
-{
-	unsigned long	pvr, hid1, pll_ext;
-
-	pvr = PVR_VER(mfspr(SPRN_PVR));
-
-	if (pvr != PVR_VER(PVR_7450)) {
-		hid1 = mfspr(SPRN_HID1) >> 28;
-		return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
-	}
-	else {
-		hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
-		pll_ext = 0; /* No way to read; must get from schematic */
-		return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
-	}
-}
-
-unsigned long __init
-ev64260_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_GT64260A);
-}
-
-/*
- * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
- * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
- *	PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
- *	This is the most IRQs you can get from one bus with this board, though.
- */
-static int __init
-ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init
-ev64260_setup_peripherals(void)
-{
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-		EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		EV64260_UART_BASE, EV64260_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-			ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
-
-	mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	if (ev64260_get_bus_speed() > 100000000)
-		mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-
-        /*
-         * Enabling of PCI internal-vs-external arbitration
-         * is a platform- and errata-dependent decision.
-         */
-        if (bh.type == MV64x60_TYPE_GT64260A )  {
-                mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-                mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-        }
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-	/*
-	 * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
-	 * bridge as interrupt inputs (via the General Purpose Ports (GPP)
-	 * register).  Need to route the MPP inputs to the GPP and set the
-	 * polarity correctly.
-	 *
-	 * In MPP Control 2 Register
-	 *   MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
-	 *   MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
-
-	/*
-	 * In MPP Control 3 Register
-	 *   MPP 26 -> GPP 26 (RTC INT)		bits  8-11 -> 0
-	 *   MPP 27 -> GPP 27 (PCI 0 INTA)	bits 12-15 -> 0
-	 *   MPP 29 -> GPP 29 (PCI 1 INTA)	bits 20-23 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
-	/* DUART & PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* DUART & PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	return;
-}
-
-static void __init
-ev64260_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
-	si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
-	si.pci_0.pci_mem[0].pci_base_hi = 0;
-	si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
-	si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x8;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
-	si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
-	si.pci_1.pci_mem[0].pci_base_hi = 0;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
-	si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x8;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64260_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-	struct uart_port	port;
-	static char		first_time = 1;
-
-	if (first_time) {
-		memset(&port, 0, sizeof(port));
-
-		port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
-		port.irq = EV64260_UART_0_IRQ;
-		port.uartclk = BASE_BAUD * 16;
-		port.regshift = 2;
-		port.iotype = UPIO_MEM;
-		port.flags = STD_COM_FLAGS;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-		gen550_init(0, &port);
-#endif
-
-		if (early_serial_setup(&port) != 0)
-			printk(KERN_WARNING "Early serial init of port 0 "
-				"failed\n");
-
-		first_time = 0;
-	}
-
-	return;
-}
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-}
-#endif
-
-static void __init
-ev64260_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: enter", 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
-
-	ev64260_setup_bridge();		/* set up PCI bridge(s) */
-	ev64260_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ev64260_early_serial_map();
-#endif
-
-	printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: exit", 0);
-
-	return;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64260_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
-
-	return;
-}
-
-static int
-ev64260_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-ev64260_reset_board(void *addr)
-{
-	local_irq_disable();
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	("mfspr   3,1008\n\t"
-	 "ori	5,5,0xcc00\n\t"
-	 "ori	4,3,0xc00\n\t"
-	 "andc	5,3,5\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,4\n\t"
-	 "isync\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,5\n\t"
-	 "isync\n\t"
-	 "sync\n\t");
-
-	/* unmap any other random cs's that might overlap with bootcs */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	/* map bootrom back in to gt @ reset defaults */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-						0xff800000, 8*1024*1024, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* move reg base back to default, setup default pci0 */
-	mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
-		(1<<24) | CONFIG_MV64X60_BASE >> 20);
-
-	/* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
-	 * via BAT or MMU, and MSR IR/DR is ON */
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	/* NOTE: assumes reset vector is at 0xfff00100 */
-	__asm__ __volatile__
-	("mtspr   26, %0\n\t"
-	 "li      4,(1<<6)\n\t"
-	 "mtspr   27,4\n\t"
-	 "rfi\n\t"
-	 :: "r" (addr):"r4");
-
-	return;
-}
-
-static void
-ev64260_restart(char *cmd)
-{
-	volatile ulong	i = 10000000;
-
-	ev64260_reset_board((void *)0xfff00100);
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-ev64260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-ev64260_power_off(void)
-{
-	ev64260_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64260_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
-	seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
-
-	return 0;
-}
-
-/* DS1501 RTC has too much variation to use RTC for calibration */
-static void __init
-ev64260_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = ev64260_get_bus_speed()/4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
- */
-static __inline__ void
-ev64260_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xfb0001fe);
-	mtspr(SPRN_DBAT1L, 0xfb00002a);
-	mb();
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-static void __init
-ev64260_map_io(void)
-{
-	io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	extern int	initrd_below_start_ok;
-
-	initrd_start=initrd_end=0;
-	initrd_below_start_ok=0;
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	parse_bootinfo(find_bootinfo());
-
-	isa_mem_base = 0;
-	isa_io_base = EV64260_PCI0_IO_CPU_BASE;
-	pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
-
-	loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
-
-	ppc_md.setup_arch = ev64260_setup_arch;
-	ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-
-	ppc_md.restart = ev64260_restart;
-	ppc_md.power_off = ev64260_power_off;
-	ppc_md.halt = ev64260_halt;
-
-	ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
-
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64260_calibrate_decr;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	ev64260_set_bat();
-
-#ifdef	CONFIG_SERIAL_8250
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#ifdef	CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef	CONFIG_KGDB
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif	/* CONFIG_KGDB */
-
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = ev64260_platform_notify;
-#endif
-
-	return;
-}
diff --git a/arch/ppc/platforms/ev64260.h b/arch/ppc/platforms/ev64260.h
deleted file mode 100644
index 44d90d56745a..000000000000
--- a/arch/ppc/platforms/ev64260.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Definitions for Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The MV64x60 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * 	0xfc000000-0xffffffff		- External FLASH on device module
- * 	0xfbf00000-0xfbffffff		- Embedded (on board) FLASH
- * 	0xfbe00000-0xfbefffff		- GT64260 Registers (preferably)
- * 					  but really a config option
- * 	0xfbd00000-0xfbdfffff		- External SRAM on device module
- * 	0xfbc00000-0xfbcfffff		- TODC chip on device module
- * 	0xfbb00000-0xfbbfffff		- External UART on device module
- * 	0xa2000000-0xfbafffff		- <hole>
- * 	0xa1000000-0xa1ffffff		- PCI 1 I/O (defined in gt64260.h)
- * 	0xa0000000-0xa0ffffff		- PCI 0 I/O (defined in gt64260.h)
- * 	0x90000000-0x9fffffff		- PCI 1 MEM (defined in gt64260.h)
- * 	0x80000000-0x8fffffff		- PCI 0 MEM (defined in gt64260.h)
- */
-
-#ifndef __PPC_PLATFORMS_EV64260_H
-#define __PPC_PLATFORMS_EV64260_H
-
-/* PCI mappings */
-#define	EV64260_PCI0_IO_CPU_BASE	0xa0000000
-#define	EV64260_PCI0_IO_PCI_BASE	0x00000000
-#define	EV64260_PCI0_IO_SIZE		0x01000000
-
-#define	EV64260_PCI0_MEM_CPU_BASE	0x80000000
-#define	EV64260_PCI0_MEM_PCI_BASE	0x80000000
-#define	EV64260_PCI0_MEM_SIZE		0x10000000
-
-#define	EV64260_PCI1_IO_CPU_BASE	(EV64260_PCI0_IO_CPU_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_PCI_BASE	(EV64260_PCI0_IO_PCI_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_SIZE		0x01000000
-
-#define	EV64260_PCI1_MEM_CPU_BASE	(EV64260_PCI0_MEM_CPU_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_PCI_BASE	(EV64260_PCI0_MEM_PCI_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_SIZE		0x10000000
-
-/* CPU Physical Memory Map setup (other than PCI) */
-#define	EV64260_EXT_FLASH_BASE		0xfc000000
-#define	EV64260_EMB_FLASH_BASE		0xfbf00000
-#define	EV64260_EXT_SRAM_BASE		0xfbd00000
-#define	EV64260_TODC_BASE		0xfbc00000
-#define	EV64260_UART_BASE		0xfbb00000
-
-#define	EV64260_EXT_FLASH_SIZE_ACTUAL	0x04000000  /* <= 64MB Extern FLASH */
-#define	EV64260_EMB_FLASH_SIZE_ACTUAL	0x00080000  /* 512KB of Embed FLASH */
-#define	EV64260_EXT_SRAM_SIZE_ACTUAL	0x00100000  /* 1MB SDRAM */
-#define	EV64260_TODC_SIZE_ACTUAL	0x00000020  /* 32 bytes for TODC */
-#define	EV64260_UART_SIZE_ACTUAL	0x00000040  /* 64 bytes for DUART */
-
-#define	EV64260_EXT_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_FLASH_SIZE_ACTUAL)
-#define	EV64260_EMB_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EMB_FLASH_SIZE_ACTUAL)
-#define	EV64260_EXT_SRAM_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_SRAM_SIZE_ACTUAL)
-#define	EV64260_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_TODC_SIZE_ACTUAL)
-/* Assembler in bootwrapper blows up if 'max' is used */
-#define	EV64260_UART_SIZE		GT64260_WINDOW_SIZE_MIN
-#define	EV64260_UART_END		((EV64260_UART_BASE +		\
-					EV64260_UART_SIZE - 1) & 0xfff00000)
-
-/* Board-specific IRQ info */
-#define	EV64260_UART_0_IRQ		85
-#define	EV64260_UART_1_IRQ		86
-#define	EV64260_PCI_0_IRQ		91
-#define	EV64260_PCI_1_IRQ		93
-
-/* Serial port setup */
-#define	EV64260_DEFAULT_BAUD		115200
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#define SERIAL_PORT_DFNS
-
-#define	EV64260_MPSC_CLK_SRC		8		/* TCLK */
-#define	EV64260_MPSC_CLK_FREQ		100000000	/* 100MHz clk */
-#else
-#define EV64260_SERIAL_0		(EV64260_UART_BASE + 0x20)
-#define EV64260_SERIAL_1		EV64260_UART_BASE
-
-#define BASE_BAUD	(EV64260_DEFAULT_BAUD * 2)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE	2
-#endif
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-/* Required for bootloader's ns16550.c code */
-#define STD_SERIAL_PORT_DFNS 						\
-        { 0, BASE_BAUD, EV64260_SERIAL_0, EV64260_UART_0_IRQ, STD_COM_FLAGS, \
-	iomem_base: (u8 *)EV64260_SERIAL_0,	/* ttyS0 */		\
-	iomem_reg_shift: 2,						\
-	io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-#endif
-#endif /* __PPC_PLATFORMS_EV64260_H */
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
deleted file mode 100644
index 6765676a5c6b..000000000000
--- a/arch/ppc/platforms/ev64360.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/bootmem.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-#include <platforms/ev64360.h>
-
-#define BOARD_VENDOR    "Marvell"
-#define BOARD_MACHINE   "EV-64360-BP"
-
-static struct		mv64x60_handle bh;
-static void __iomem	*sram_base;
-
-static u32		ev64360_flash_size_0;
-static u32		ev64360_flash_size_1;
-
-static u32		ev64360_bus_frequency;
-
-unsigned char	__res[sizeof(bd_t)];
-
-TODC_ALLOC();
-
-static int __init
-ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return 0;
-}
-
-static void __init
-ev64360_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	#ifdef CONFIG_PCI
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-	#else
-	si.pci_0.enable_bus = 0;
-	si.pci_1.enable_bus = 0;
-	#endif
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	#ifdef CONFIG_PCI
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64360_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	#endif
-}
-
-/* Bridge & platform setup routines */
-void __init
-ev64360_intr_setup(void)
-{
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	/* Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-ev64360_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up window for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* We only use the 32-bit flash */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
-		&ev64360_flash_size_0);
-	ev64360_flash_size_1 = 0;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-		ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* set up PCI interrupt controller */
-	ev64360_intr_setup();
-}
-
-static void __init
-ev64360_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 */
-	_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
-
-	ev64360_setup_bridge();
-	ev64360_setup_peripherals();
-	ev64360_bus_frequency = ev64360_bus_freq();
-
-	printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
-		"(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64360_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-ev64360_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		EV64360_ETH0_PHY_ADDR,
-		EV64360_ETH1_PHY_ADDR,
-		EV64360_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-static int
-ev64360_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout.
- *
- * FLASH Amount:	0xff000000 - 0xffffffff
- * -------------	-----------------------
- * Reserved:		0xff000000 - 0xff03ffff
- * JFFS2 file system:	0xff040000 - 0xffefffff
- * U-boot:		0xfff00000 - 0xffffffff
- */
-static int __init
-ev64360_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = ev64360_flash_size_0 + ev64360_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = 3;
-
-	if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
-		GFP_KERNEL)) == NULL) {
-
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "reserved";
-	ptbl[0].offset = 0;
-	ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].name = "jffs2";
-	ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].name = "U-BOOT";
-	ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-
-arch_initcall(ev64360_setup_mtd);
-#endif
-
-static void
-ev64360_restart(char *cmd)
-{
-	ulong	i = 0xffffffff;
-	volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
-
-	/* issue hard reset */
-	rtc_base[0xf] = 0x80;
-	rtc_base[0xc] = 0x00;
-	rtc_base[0xd] = 0x01;
-	rtc_base[0xf] = 0x83;
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-ev64360_halt(void)
-{
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-ev64360_power_off(void)
-{
-	ev64360_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64360_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
-
-	return 0;
-}
-
-static void __init
-ev64360_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = ev64360_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-unsigned long __init
-ev64360_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_MV64360);
-}
-
-static inline void
-ev64360_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64360_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
-			 CONFIG_MV64X60_NEW_BASE, \
-			 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-	#ifdef CONFIG_ISA
-	isa_mem_base = 0;
-	#endif
-
-	ppc_md.setup_arch = ev64360_setup_arch;
-	ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = ev64360_restart;
-	ppc_md.power_off = ev64360_power_off;
-	ppc_md.halt = ev64360_halt;
-	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64360_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = ev64360_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = ev64360_platform_notify;
-#endif
-
-	ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
-}
diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h
deleted file mode 100644
index b30f4722690a..000000000000
--- a/arch/ppc/platforms/ev64360.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Definitions for Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x42000000-0x4203ffff      - Internal SRAM
- *    0xf1000000-0xf100ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xfc800000-0xfcffffff      - RTC
- *    0xff000000-0xffffffff      - Boot window, 16 MB flash
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_EV64360_H
-#define __PPC_PLATFORMS_EV64360_H
-
-/* CPU Physical Memory Map setup. */
-#define EV64360_BOOT_WINDOW_BASE		0xff000000
-#define EV64360_BOOT_WINDOW_SIZE		0x01000000 /* 16 MB */
-#define EV64360_INTERNAL_SRAM_BASE		0x42000000
-#define EV64360_RTC_WINDOW_BASE			0xfc800000
-#define EV64360_RTC_WINDOW_SIZE			0x00800000 /* 8 MB */
-
-#define EV64360_PCI1_MEM_START_PROC_ADDR	0x80000000
-#define EV64360_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define EV64360_PCI1_MEM_START_PCI_LO_ADDR	0x80000000
-#define EV64360_PCI1_MEM_SIZE			0x40000000 /* 1 GB */
-#define EV64360_PCI1_IO_START_PROC_ADDR		0xc0000000
-#define EV64360_PCI1_IO_START_PCI_ADDR		0x00000000
-#define EV64360_PCI1_IO_SIZE			0x04000000 /* 64 MB */
-
-#define	EV64360_DEFAULT_BAUD			115200
-#define	EV64360_MPSC_CLK_SRC			8	  /* TCLK */
-#define EV64360_MPSC_CLK_FREQ			133333333
-
-#define	EV64360_MTD_RESERVED_SIZE		0x40000
-#define EV64360_MTD_JFFS2_SIZE			0xec0000
-#define EV64360_MTD_UBOOT_SIZE			0x100000
-
-#define	EV64360_ETH0_PHY_ADDR			8
-#define	EV64360_ETH1_PHY_ADDR			9
-#define	EV64360_ETH2_PHY_ADDR			10
-
-#define EV64360_ETH_TX_QUEUE_SIZE		800
-#define EV64360_ETH_RX_QUEUE_SIZE		400
-
-#define	EV64360_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	EV64360_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	EV64360_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	EV64360_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-static inline u32
-ev64360_bus_freq(void)
-{
-	return 133333333;
-}
-
-#endif	/* __PPC_PLATFORMS_EV64360_H */
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
deleted file mode 100644
index 5219366667b3..000000000000
--- a/arch/ppc/platforms/fads.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola 860T FADS board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Added MPC86XADS support.
- * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
- * for SW point of view". This is 99% correct.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_FADS_H__
-#define __ASM_FADS_H__
-
-
-#include <asm/ppcboot.h>
-
-/* Memory map is configured by the PROM startup.
- * I tried to follow the FADS manual, although the startup PROM
- * dictates this and we simply have to move some of the physical
- * addresses for Linux.
- */
-#define BCSR_ADDR		((uint)0xff010000)
-
-/* PHY link change interrupt */
-#define PHY_INTERRUPT	SIU_IRQ2
-
-#define BCSR_SIZE		((uint)(64 * 1024))
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-/* Bits of interest in the BCSRs.
- */
-#define BCSR1_ETHEN		((uint)0x20000000)
-#define BCSR1_IRDAEN		((uint)0x10000000)
-#define BCSR1_RS232EN_1		((uint)0x01000000)
-#define BCSR1_PCCEN		((uint)0x00800000)
-#define BCSR1_PCCVCC0		((uint)0x00400000)
-#define BCSR1_PCCVPP0		((uint)0x00200000)
-#define BCSR1_PCCVPP1		((uint)0x00100000)
-#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
-#define BCSR1_RS232EN_2		((uint)0x00040000)
-#define BCSR1_PCCVCC1		((uint)0x00010000)
-#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
-
-#define BCSR4_ETHLOOP		((uint)0x80000000)	/* EEST Loopback */
-#define BCSR4_EEFDX		((uint)0x40000000)	/* EEST FDX enable */
-#define BCSR4_FETH_EN		((uint)0x08000000)	/* PHY enable */
-#define BCSR4_FETHCFG0		((uint)0x04000000)	/* PHY autoneg mode */
-#define BCSR4_FETHCFG1		((uint)0x00400000)	/* PHY autoneg mode */
-#define BCSR4_FETHFDE		((uint)0x02000000)	/* PHY FDX advertise */
-#define BCSR4_FETHRST		((uint)0x00200000)	/* PHY Reset */
-
-/* IO_BASE definition for pcmcia.
- */
-#define _IO_BASE	0x80000000
-#define _IO_BASE_SIZE	0x1000
-
-#ifdef CONFIG_IDE
-#define MAX_HWIFS 1
-#endif
-
-/* Interrupt level assignments.
- */
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-/* We don't use the 8259.
- */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC1 or SCC2 */
-
-#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)		/* Probably 860 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-#endif /* CONFIG_SCC1_ENET */
-
-#ifdef CONFIG_SCC2_ENET		/* Probably 823/850 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0400)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* Control bits in the SICR to route TCLK and RCLK to
- * SCC2.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)
-#endif /* CONFIG_SCC2_ENET */
-
-#endif /* __ASM_FADS_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
deleted file mode 100644
index 904b518c152e..000000000000
--- a/arch/ppc/platforms/hdpu.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-/*
- * Board setup routines for the Sky Computers HDPU Compute Blade.
- *
- * Written by Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *                         Rabeeh Khoury - rabeeh@galileo.co.il
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/platform_device.h>
-
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/smp.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/mv64x60.h>
-#include <asm/ppcboot.h>
-#include <platforms/hdpu.h>
-#include <linux/mv643xx.h>
-#include <linux/hdpu_features.h>
-#include <linux/device.h>
-#include <linux/mtd/physmap.h>
-
-#define BOARD_VENDOR	"Sky Computers"
-#define BOARD_MACHINE	"HDPU-CB-A"
-
-bd_t ppcboot_bd;
-int ppcboot_bd_valid = 0;
-
-static mv64x60_handle_t bh;
-
-extern char cmd_line[];
-
-unsigned long hdpu_find_end_of_memory(void);
-void hdpu_mpsc_progress(char *s, unsigned short hex);
-void hdpu_heartbeat(void);
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7);
-static void hdpu_set_l1pe(void);
-static void hdpu_cpustate_set(unsigned char new_state);
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-extern int smp_tb_synchronized;
-
-void __devinit hdpu_tben_give(void);
-void __devinit hdpu_tben_take(void);
-#endif
-
-static int __init
-hdpu_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_1_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init hdpu_intr_setup(void)
-{
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL,
-		      (1 | (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
-		       (1 << 6) | (1 << 7) | (1 << 12) | (1 << 16) |
-		       (1 << 18) | (1 << 19) | (1 << 20) | (1 << 21) |
-		       (1 << 22) | (1 << 23) | (1 << 24) | (1 << 25) |
-		       (1 << 26) | (1 << 27) | (1 << 28) | (1 << 29)));
-
-	/* XXXX Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1 << 5) | (1 << 9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1 << 5) | (1 << 9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~((1 << 8) | (1 << 13)));
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1 << 8) | (1 << 13));
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1 << 25));
-}
-
-static void __init hdpu_setup_peripherals(void)
-{
-	unsigned int val;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-				 HDPU_TBEN_BASE, HDPU_TBEN_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-				 HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, 0, 0, 0);
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Enable pipelining */
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13));
-	/* Enable Snoop Pipelining */
-	mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24));
-
-	/*
-	 * Change DRAM read buffer assignment.
-	 * Assign read buffer 0 dedicated only for CPU,
-	 * and the rest read buffer 1.
-	 */
-	val = mv64x60_read(&bh, MV64360_SDRAM_CONFIG);
-	val = val & 0x03ffffff;
-	val = val | 0xf8000000;
-	mv64x60_write(&bh, MV64360_SDRAM_CONFIG, val);
-
-	/*
-	 * Configure internal SRAM -
-	 * Cache coherent write back, if CONFIG_MV64360_SRAM_CACHE_COHERENT set
-	 * Parity enabled.
-	 * Parity error propagation
-	 * Arbitration not parked for CPU only
-	 * Other bits are reserved.
-	 */
-#ifdef CONFIG_MV64360_SRAM_CACHE_COHERENT
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#endif
-
-	hdpu_intr_setup();
-}
-
-static void __init hdpu_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = HDPU_BRIDGE_REG_BASE;
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = HDPU_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = HDPU_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = HDPU_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = HDPU_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = HDPU_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = HDPU_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = HDPU_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = HDPU_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = HDPU_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = HDPU_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = HDPU_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = HDPU_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = HDPU_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = HDPU_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;	/* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;	/* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;	/* errata */
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#endif
-	}
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_PCI);
-
-	/* Lookup PCI host bridges */
-	mv64x60_init(&bh, &si);
-	pci_dram_offset = 0;	/* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = hdpu_map_irq;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_REG);
-	/*
-	 * Enabling of PCI internal-vs-external arbitration
-	 * is a platform- and errata-dependent decision.
-	 */
-	return;
-}
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init hdpu_early_serial_map(void)
-{
-#ifdef	CONFIG_KGDB
-	static char first_time = 1;
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-	if (first_time) {
-		gt_early_mpsc_init(KGDB_PORT,
-				   B9600 | CS8 | CREAD | HUPCL | CLOCAL);
-		first_time = 0;
-	}
-
-	return;
-#endif
-}
-#endif
-
-static void hdpu_init2(void)
-{
-	return;
-}
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init hdpu_fixup_eth_pdata(struct platform_device *pd)
-{
-
-	struct mv643xx_eth_platform_data *eth_pd;
-	eth_pd = pd->dev.platform_data;
-
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = pd->id;
-	eth_pd->speed = SPEED_100;
-	eth_pd->duplex = DUPLEX_FULL;
-	eth_pd->tx_queue_size = 400;
-	eth_pd->rx_queue_size = 800;
-}
-#endif
-
-static void __init hdpu_fixup_mpsc_pdata(struct platform_device *pd)
-{
-
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pd->dev.platform_data;
-
-	pdata->max_idle = 40;
-	if (ppcboot_bd_valid)
-		pdata->default_baud = ppcboot_bd.bi_baudrate;
-	else
-		pdata->default_baud = HDPU_DEFAULT_BAUD;
-	pdata->brg_clk_src = HDPU_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = HDPU_MPSC_CLK_FREQ;
-}
-
-#if defined(CONFIG_HDPU_FEATURES)
-static void __init hdpu_fixup_cpustate_pdata(struct platform_device *pd)
-{
-	struct platform_device *pds[1];
-	pds[0] = pd;
-	mv64x60_pd_fixup(&bh, pds, 1);
-}
-#endif
-
-static int hdpu_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-		{
-		MPSC_CTLR_NAME ".0", hdpu_fixup_mpsc_pdata},
-#if defined(CONFIG_MV643XX_ETH)
-		{
-		MV643XX_ETH_NAME ".0", hdpu_fixup_eth_pdata},
-#endif
-#if defined(CONFIG_HDPU_FEATURES)
-		{
-		HDPU_CPUSTATE_NAME ".0", hdpu_fixup_cpustate_pdata},
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-static void __init hdpu_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	ppc_md.heartbeat = hdpu_heartbeat;
-
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = 1;
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L1 Parity Bits */
-	hdpu_set_l1pe();
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(0x80080000);
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-
-	hdpu_setup_bridge();
-
-	hdpu_setup_peripherals();
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-	hdpu_early_serial_map();
-#endif
-
-	printk("SKY HDPU Compute Blade \n");
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: exit", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_OK);
-	return;
-}
-static void __init hdpu_init_irq(void)
-{
-	mv64360_init_irq();
-}
-
-static void __init hdpu_set_l1pe()
-{
-	unsigned long ictrl;
-	asm volatile ("mfspr %0, 1011":"=r" (ictrl):);
-	ictrl |= ICTRL_EICE | ICTRL_EDC | ICTRL_EICP;
-	asm volatile ("mtspr 1011, %0"::"r" (ictrl));
-}
-
-/*
- * Set BAT 1 to map 0xf1000000 to end of physical memory space.
- */
-static __inline__ void hdpu_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf10001fe);
-	mtspr(SPRN_DBAT1L, 0xf100002a);
-	mb();
-
-	return;
-}
-
-unsigned long __init hdpu_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				    MV64x60_TYPE_MV64360);
-}
-
-static void hdpu_reset_board(void)
-{
-	volatile int infinite = 1;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_RESET);
-
-	local_irq_disable();
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) |
-						   (1 << 5) | (1 << 6)));
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	    ("\n"
-	     "mfspr   3,1008\n"
-	     "ori	5,5,0xcc00\n"
-	     "ori	4,3,0xc00\n"
-	     "andc	5,3,5\n"
-	     "sync\n"
-	     "mtspr	1008,4\n"
-	     "isync\n" "sync\n" "mtspr	1008,5\n" "isync\n" "sync\n");
-
-	/* Hit the reset bit */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 3));
-
-	while (infinite)
-		infinite = infinite;
-
-	return;
-}
-
-static void hdpu_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	hdpu_reset_board();
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void hdpu_halt(void)
-{
-	local_irq_disable();
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_HALT);
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) | (1 << 5) |
-						   (1 << 6)));
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void hdpu_power_off(void)
-{
-	hdpu_halt();
-	/* NOTREACHED */
-}
-
-static int hdpu_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: Sky Computers\n");
-	seq_printf(m, "machine\t\t: HDPU Compute Blade\n");
-	seq_printf(m, "PVID\t\t: 0x%x, vendor: %s\n",
-		   pvid, (pvid & (1 << 15) ? "IBM" : "Motorola"));
-
-	return 0;
-}
-
-static void __init hdpu_calibrate_decr(void)
-{
-	ulong freq;
-
-	if (ppcboot_bd_valid)
-		freq = ppcboot_bd.bi_busfreq / 4;
-	else
-		freq = 133000000;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7)
-{
-	bd_t *bd = NULL;
-	char *cmdline_start = NULL;
-	int cmdline_len = 0;
-
-	if (r3) {
-		if ((r3 & 0xf0000000) == 0)
-			r3 += KERNELBASE;
-		if ((r3 & 0xf0000000) == KERNELBASE) {
-			bd = (void *)r3;
-
-			memcpy(&ppcboot_bd, bd, sizeof(ppcboot_bd));
-			ppcboot_bd_valid = 1;
-		}
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (r4 && r5 && r5 > r4) {
-		if ((r4 & 0xf0000000) == 0)
-			r4 += KERNELBASE;
-		if ((r5 & 0xf0000000) == 0)
-			r5 += KERNELBASE;
-		if ((r4 & 0xf0000000) == KERNELBASE) {
-			initrd_start = r4;
-			initrd_end = r5;
-			initrd_below_start_ok = 1;
-		}
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	if (r6 && r7 && r7 > r6) {
-		if ((r6 & 0xf0000000) == 0)
-			r6 += KERNELBASE;
-		if ((r7 & 0xf0000000) == 0)
-			r7 += KERNELBASE;
-		if ((r6 & 0xf0000000) == KERNELBASE) {
-			cmdline_start = (void *)r6;
-			cmdline_len = (r7 - r6);
-			strncpy(cmd_line, cmdline_start, cmdline_len);
-		}
-	}
-}
-
-void hdpu_heartbeat(void)
-{
-	if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 5));
-	else
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, (1 << 5));
-
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-}
-
-static void __init hdpu_map_io(void)
-{
-	io_block_mapping(0xf1000000, 0xf1000000, 0x20000, _PAGE_IO);
-}
-
-#ifdef CONFIG_SMP
-char hdpu_smp0[] = "SMP Cpu #0";
-char hdpu_smp1[] = "SMP Cpu #1";
-
-static irqreturn_t hdpu_smp_cpu0_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU0_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t hdpu_smp_cpu1_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU1_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static void smp_hdpu_CPU_two(void)
-{
-	__asm__ __volatile__
-	    ("\n"
-	     "lis     3,0x0000\n"
-	     "ori     3,3,0x00c0\n"
-	     "mtspr   26, 3\n" "li      4,0\n" "mtspr   27,4\n" "rfi");
-
-}
-
-static int smp_hdpu_probe(void)
-{
-	int *cpu_count_reg;
-	int num_cpus = 0;
-
-	cpu_count_reg = ioremap(HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE);
-	if (cpu_count_reg) {
-		num_cpus = (*cpu_count_reg >> 20) & 0x3;
-		iounmap(cpu_count_reg);
-	}
-
-	/* Validate the bits in the CPLD. If we could not map the reg, return 2.
-	 * If the register reported 0 or 3, return 2.
-	 * Older CPLD revisions set these bits to all ones (val = 3).
-	 */
-	if ((num_cpus < 1) || (num_cpus > 2)) {
-		printk
-		    ("Unable to determine the number of processors %d . deafulting to 2.\n",
-		     num_cpus);
-		num_cpus = 2;
-	}
-	return num_cpus;
-}
-
-static void
-smp_hdpu_message_pass(int target, int msg)
-{
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	case MSG_ALL_BUT_SELF:
-		if (smp_processor_id())
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	default:
-		if (target == 0)
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	}
-}
-
-static void smp_hdpu_kick_cpu(int nr)
-{
-	volatile unsigned int *bootaddr;
-
-	if (ppc_md.progress)
-		ppc_md.progress("smp_hdpu_kick_cpu", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_CPU1_KICK);
-
-       /* Disable BootCS. Must also reduce the windows size to zero. */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, 0, 0, 0);
-
-	bootaddr = ioremap(HDPU_INTERNAL_SRAM_BASE, HDPU_INTERNAL_SRAM_SIZE);
-	if (!bootaddr) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_kick_cpu: ioremap failed", 0);
-		return;
-	}
-
-	memcpy((void *)(bootaddr + 0x40), (void *)&smp_hdpu_CPU_two, 0x20);
-
-	/* map SRAM to 0xfff00000 */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 0xfff00000, HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Enable CPU1 arbitration */
-	mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1 << 9));
-
-	/*
-	 * Wait 100mSecond until other CPU has reached __secondary_start.
-	 * When it reaches, it is permittable to rever the SRAM mapping etc...
-	 */
-	mdelay(100);
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-
-	iounmap(bootaddr);
-
-	/* Set up window for internal sram (256KByte insize) */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	/*
-	 * Set up windows for embedded FLASH (using boot CS window).
-	 */
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-}
-
-static void smp_hdpu_setup_cpu(int cpu_nr)
-{
-	if (cpu_nr == 0) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 0", 0);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, 0xff);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_MASK, 0xff);
-		request_irq(60, hdpu_smp_cpu0_int_handler,
-			    IRQF_DISABLED, hdpu_smp0, 0);
-	}
-
-	if (cpu_nr == 1) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 1", 0);
-
-		hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR |
-				  CPUSTATE_KERNEL_CPU1_OK);
-
-		/* Enable L1 Parity Bits */
-		hdpu_set_l1pe();
-
-		/* Enable L2 cache */
-		_set_L2CR(0);
-		_set_L2CR(0x80080000);
-
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, 0x0);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_MASK, 0xff);
-		request_irq(28, hdpu_smp_cpu1_int_handler,
-			    IRQF_DISABLED, hdpu_smp1, 0);
-	}
-
-}
-
-void __devinit hdpu_tben_give()
-{
-	volatile unsigned long *val = 0;
-
-	/* By writing 0 to the TBEN_BASE, the timebases is frozen */
-	val = ioremap(HDPU_TBEN_BASE, 4);
-	*val = 0;
-	mb();
-
-	spin_lock(&timebase_lock);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-
-	/* By writing 1 to the TBEN_BASE, the timebases is thawed */
-	*val = 1;
-	mb();
-
-	iounmap(val);
-
-}
-
-void __devinit hdpu_tben_take()
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-}
-
-static struct smp_ops_t hdpu_smp_ops = {
-	.message_pass = smp_hdpu_message_pass,
-	.probe = smp_hdpu_probe,
-	.kick_cpu = smp_hdpu_kick_cpu,
-	.setup_cpu = smp_hdpu_setup_cpu,
-	.give_timebase = hdpu_tben_give,
-	.take_timebase = hdpu_tben_take,
-};
-#endif				/* CONFIG_SMP */
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(r3, r4, r5, r6, r7);
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = hdpu_setup_arch;
-	ppc_md.init = hdpu_init2;
-	ppc_md.show_cpuinfo = hdpu_show_cpuinfo;
-	ppc_md.init_IRQ = hdpu_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = hdpu_restart;
-	ppc_md.power_off = hdpu_power_off;
-	ppc_md.halt = hdpu_halt;
-	ppc_md.find_end_of_memory = hdpu_find_end_of_memory;
-	ppc_md.calibrate_decr = hdpu_calibrate_decr;
-	ppc_md.setup_io_mappings = hdpu_map_io;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-	bh.v_base = (unsigned long *)bh.p_base;
-
-	hdpu_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = hdpu_mpsc_progress;	/* embedded UART */
-	mv64x60_progress_init(bh.p_base);
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-
-#ifdef CONFIG_SMP
-	smp_ops = &hdpu_smp_ops;
-#endif				/* CONFIG_SMP */
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = hdpu_platform_notify;
-#endif
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-/* SMP safe version of the serial text debug routine. Uses Semaphore 0 */
-void hdpu_mpsc_progress(char *s, unsigned short hex)
-{
-	while (mv64x60_read(&bh, MV64360_WHO_AM_I) !=
-	       mv64x60_read(&bh, MV64360_SEMAPHORE_0)) {
-	}
-	mv64x60_mpsc_progress(s, hex);
-	mv64x60_write(&bh, MV64360_SEMAPHORE_0, 0xff);
-}
-#endif
-
-static void hdpu_cpustate_set(unsigned char new_state)
-{
-	unsigned int state = (new_state << 21);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (0xff << 21));
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, state);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition hdpu_partitions[] = {
-	{
-	 .name = "Root FS",
-	 .size = 0x03400000,
-	 .offset = 0,
-	 .mask_flags = 0,
-	 },{
-	 .name = "User FS",
-	 .size = 0x00800000,
-	 .offset = 0x03400000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "Kernel Image",
-	 .size = 0x002C0000,
-	 .offset = 0x03C00000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootEnv",
-	 .size = 0x00040000,
-	 .offset = 0x03EC0000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootROM",
-	 .size = 0x00100000,
-	 .offset = 0x03F00000,
-	 .mask_flags = 0,
-	 }
-};
-
-static int __init hdpu_setup_mtd(void)
-{
-
-	physmap_set_partitions(hdpu_partitions, 5);
-	return 0;
-}
-
-arch_initcall(hdpu_setup_mtd);
-#endif
-
-#ifdef CONFIG_HDPU_FEATURES
-
-static struct resource hdpu_cpustate_resources[] = {
-	[0] = {
-	       .name = "addr base",
-	       .start = MV64x60_GPP_VALUE_SET,
-	       .end = MV64x60_GPP_VALUE_CLR + 1,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct resource hdpu_nexus_resources[] = {
-	[0] = {
-	       .name = "nexus register",
-	       .start = HDPU_NEXUS_ID_BASE,
-	       .end = HDPU_NEXUS_ID_BASE + HDPU_NEXUS_ID_SIZE,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct platform_device hdpu_cpustate_device = {
-	.name = HDPU_CPUSTATE_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_cpustate_resources),
-	.resource = hdpu_cpustate_resources,
-};
-
-static struct platform_device hdpu_nexus_device = {
-	.name = HDPU_NEXUS_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_nexus_resources),
-	.resource = hdpu_nexus_resources,
-};
-
-static int __init hdpu_add_pds(void)
-{
-	platform_device_register(&hdpu_cpustate_device);
-	platform_device_register(&hdpu_nexus_device);
-	return 0;
-}
-
-arch_initcall(hdpu_add_pds);
-#endif
diff --git a/arch/ppc/platforms/hdpu.h b/arch/ppc/platforms/hdpu.h
deleted file mode 100644
index f9e020b6970c..000000000000
--- a/arch/ppc/platforms/hdpu.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Definitions for Sky Computers HDPU board.
- *
- * Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- * Based on code done by  Tim Montgomery <timm@artesyncp.com>
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64K and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x80000000-0x8fffffff	 - PCI 0 MEM
- *    0xa0000000-0xafffffff	 - PCI 1 MEM
- *    0xc0000000-0xc0ffffff	 - PCI 0 I/O
- *    0xc1000000-0xc1ffffff	 - PCI 1 I/O
-
- *    0xf1000000-0xf100ffff      - MV64360 Registers
- *    0xf1010000-0xfb9fffff      - HOLE
- *    0xfbfa0000-0xfbfaffff      - TBEN
- *    0xfbf00000-0xfbfbffff      - NEXUS
- *    0xfbfc0000-0xfbffffff      - Internal SRAM
- *    0xfc000000-0xffffffff      - Boot window
- */
-
-#ifndef __PPC_PLATFORMS_HDPU_H
-#define __PPC_PLATFORMS_HDPU_H
-
-/* CPU Physical Memory Map setup. */
-#define	HDPU_BRIDGE_REG_BASE		     0xf1000000
-
-#define HDPU_TBEN_BASE                        0xfbfa0000
-#define HDPU_TBEN_SIZE                        0x00010000
-#define HDPU_NEXUS_ID_BASE                    0xfbfb0000
-#define HDPU_NEXUS_ID_SIZE                    0x00010000
-#define HDPU_INTERNAL_SRAM_BASE               0xfbfc0000
-#define HDPU_INTERNAL_SRAM_SIZE               0x00040000
-#define	HDPU_EMB_FLASH_BASE		      0xfc000000
-#define	HDPU_EMB_FLASH_SIZE      	      0x04000000
-
-/* PCI Mappings */
-
-#define HDPU_PCI0_MEM_START_PROC_ADDR         0x80000000
-#define HDPU_PCI0_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI0_MEM_START_PCI_LO_ADDR       HDPU_PCI0_MEM_START_PROC_ADDR
-#define HDPU_PCI0_MEM_SIZE                    0x10000000
-
-#define HDPU_PCI1_MEM_START_PROC_ADDR         0xc0000000
-#define HDPU_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI1_MEM_START_PCI_LO_ADDR       HDPU_PCI1_MEM_START_PROC_ADDR
-#define HDPU_PCI1_MEM_SIZE                    0x20000000
-
-#define HDPU_PCI0_IO_START_PROC_ADDR          0xc0000000
-#define HDPU_PCI0_IO_START_PCI_ADDR           0x00000000
-#define HDPU_PCI0_IO_SIZE                     0x01000000
-
-#define HDPU_PCI1_IO_START_PROC_ADDR          0xc1000000
-#define HDPU_PCI1_IO_START_PCI_ADDR           0x01000000
-#define HDPU_PCI1_IO_SIZE                     0x01000000
-
-#define HDPU_DEFAULT_BAUD 115200
-#define HDPU_MPSC_CLK_SRC 8	/* TCLK */
-#define HDPU_MPSC_CLK_FREQ 133000000	/* 133 Mhz */
-
-#define	HDPU_PCI_0_IRQ		(8+64)
-#define	HDPU_PCI_1_IRQ		(13+64)
-
-#endif				/* __PPC_PLATFORMS_HDPU_H */
diff --git a/arch/ppc/platforms/hermes.h b/arch/ppc/platforms/hermes.h
deleted file mode 100644
index de91afff8ca1..000000000000
--- a/arch/ppc/platforms/hermes.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Multidata HERMES-PRO ( / SL ) board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_HERMES_H
-#define __MACH_HERMES_H
-
-
-#include <asm/ppcboot.h>
-
-#define	HERMES_IMMR_BASE    0xFF000000	/* phys. addr of IMMR			*/
-#define	HERMES_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     HERMES_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     HERMES_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_HERMES_H */
diff --git a/arch/ppc/platforms/ip860.h b/arch/ppc/platforms/ip860.h
deleted file mode 100644
index 2f1f86ce1447..000000000000
--- a/arch/ppc/platforms/ip860.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * MicroSys IP860 VMEBus board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_IP860_H
-#define __MACH_IP860_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IP860_IMMR_BASE	0xF1000000	/* phys. addr of IMMR			*/
-#define	IP860_IMAP_SIZE	(64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR	IP860_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	IP860_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-/*
- * MPC8xx Chip Select Usage
- */
-#define	IP860_BOOT_CS		0	/* Boot (VMEBus or Flash) Chip Select 0	*/
-#define IP860_FLASH_CS		1	/* Flash	    is on Chip Select 1	*/
-#define IP860_SDRAM_CS		2	/* SDRAM	    is on Chip Select 2	*/
-#define	IP860_SRAM_CS		3	/* SRAM		    is on Chip Select 3	*/
-#define IP860_BCSR_CS		4	/* BCSR		    is on Chip Select 4	*/
-#define IP860_IP_CS		5	/* IP Slots	   are on Chip Select 5	*/
-#define IP860_VME_STD_CS	6	/* VME Standard I/O is on Chip Select 6	*/
-#define IP860_VME_SHORT_CS	7	/* VME Short    I/O is on Chip Select 7	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_IP860_H */
diff --git a/arch/ppc/platforms/ivms8.h b/arch/ppc/platforms/ivms8.h
deleted file mode 100644
index 9109e684ad9b..000000000000
--- a/arch/ppc/platforms/ivms8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Speech Design Integrated Voicemail board specific definitions
- * - IVMS8  (small,  8 channels)
- * - IVML24 (large, 24 channels)
- *
- * In 2.5 when we force a new bootloader, we can merge these two, and add
- * in _MACH_'s for them. -- Tom
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IVMS8_H__
-#define __ASM_IVMS8_H__
-
-
-#include <asm/ppcboot.h>
-
-#define IVMS_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define IVMS_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define IMAP_ADDR	IVMS_IMMR_BASE	/* phys. base address of IMMR area */
-#define IMAP_SIZE	IVMS_IMAP_SIZE	/* mapped size of IMMR area */
-
-#define PCMCIA_MEM_ADDR	((uint)0xFE100000)
-#define PCMCIA_MEM_SIZE	((uint)(64 * 1024))
-
-#define FEC_INTERRUPT	 9		/* = SIU_LEVEL4 */
-#define IDE0_INTERRUPT	10		/* = IRQ5 */
-#define CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2) */
-#define PHY_INTERRUPT	12		/* = IRQ6 */
-
-/* override the default number of IDE hardware interfaces */
-#define MAX_HWIFS	1
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0x0000	/* Offset in PCMCIA memory */
-#define IDE0_DATA_REG_OFFSET		0x0000
-#define IDE0_ERROR_REG_OFFSET		0x0081
-#define IDE0_NSECTOR_REG_OFFSET		0x0082
-#define IDE0_SECTOR_REG_OFFSET		0x0083
-#define IDE0_LCYL_REG_OFFSET		0x0084
-#define IDE0_HCYL_REG_OFFSET		0x0085
-#define IDE0_SELECT_REG_OFFSET		0x0086
-#define IDE0_STATUS_REG_OFFSET		0x0087
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* We don't use the 8259. */
-#define NR_8259_INTS	0
-
-#endif /* __ASM_IVMS8_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
deleted file mode 100644
index fe6e88cdb1cd..000000000000
--- a/arch/ppc/platforms/katana.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Board setup routines for the Artesyn Katana cPCI boards.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-/*
- * Supports the Artesyn 750i, 752i, and 3750.  The 752i is virtually identical
- * to the 750i except that it has an mv64460 bridge.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/unistd.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <platforms/katana.h>
-#include <asm/machdep.h>
-
-static struct mv64x60_handle	bh;
-static katana_id_t		katana_id;
-static void __iomem		*cpld_base;
-static void __iomem		*sram_base;
-static u32			katana_flash_size_0;
-static u32			katana_flash_size_1;
-static u32			katana_bus_frequency;
-static struct pci_controller	katana_hose_a;
-
-unsigned char	__res[sizeof(bd_t)];
-
-/* PCI Interrupt routing */
-static int __init
-katana_irq_lookup_750i(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		/* IDSEL 4  (PMC 1) */
-		{ KATANA_PCI_INTB_IRQ_750i, KATANA_PCI_INTC_IRQ_750i,
-			KATANA_PCI_INTD_IRQ_750i, KATANA_PCI_INTA_IRQ_750i },
-		/* IDSEL 5  (PMC 2) */
-		{ KATANA_PCI_INTC_IRQ_750i, KATANA_PCI_INTD_IRQ_750i,
-			KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
-		/* IDSEL 6 (T8110) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-		/* IDSEL 7 (unused) */
-		{0, 0, 0, 0 },
-		/* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-	};
-	const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_irq_lookup_3750(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		{ KATANA_PCI_INTA_IRQ_3750, 0, 0, 0 }, /* IDSEL 3 (BCM5691) */
-		{ KATANA_PCI_INTB_IRQ_3750, 0, 0, 0 }, /* IDSEL 4 (MV64360 #2)*/
-		{ KATANA_PCI_INTC_IRQ_3750, 0, 0, 0 }, /* IDSEL 5 (MV64360 #3)*/
-	};
-	const long min_idsel = 3, max_idsel = 5, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	switch (katana_id) {
-	case KATANA_ID_750I:
-	case KATANA_ID_752I:
-		return katana_irq_lookup_750i(idsel, pin);
-
-	case KATANA_ID_3750:
-		return katana_irq_lookup_3750(idsel, pin);
-
-	default:
-		printk(KERN_ERR "Bogus board ID\n");
-		return 0;
-	}
-}
-
-/* Board info retrieval routines */
-void __init
-katana_get_board_id(void)
-{
-	switch (in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)) {
-	case KATANA_PRODUCT_ID_3750:
-		katana_id = KATANA_ID_3750;
-		break;
-
-	case KATANA_PRODUCT_ID_750i:
-		katana_id = KATANA_ID_750I;
-		break;
-
-	case KATANA_PRODUCT_ID_752i:
-		katana_id = KATANA_ID_752I;
-		break;
-
-	default:
-		printk(KERN_ERR "Unsupported board\n");
-	}
-}
-
-int __init
-katana_get_proc_num(void)
-{
-	u16		val;
-	u8		save_exclude;
-	static int	proc = -1;
-	static u8	first_time = 1;
-
-	if (first_time) {
-		if (katana_id != KATANA_ID_3750)
-			proc = 0;
-		else {
-			save_exclude = mv64x60_pci_exclude_bridge;
-			mv64x60_pci_exclude_bridge = 0;
-
-			early_read_config_word(bh.hose_b, 0,
-				PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
-
-			mv64x60_pci_exclude_bridge = save_exclude;
-
-			switch(val) {
-			case PCI_DEVICE_ID_KATANA_3750_PROC0:
-				proc = 0;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC1:
-				proc = 1;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC2:
-				proc = 2;
-				break;
-
-			default:
-				printk(KERN_ERR "Bogus Device ID\n");
-			}
-		}
-
-		first_time = 0;
-	}
-
-	return proc;
-}
-
-static inline int
-katana_is_monarch(void)
-{
-	return in_8(cpld_base + KATANA_CPLD_BD_CFG_3) &
-		KATANA_CPLD_BD_CFG_3_MONARCH;
-}
-
-static void __init
-katana_setup_bridge(void)
-{
-	struct pci_controller hose;
-	struct mv64x60_setup_info si;
-	void __iomem *vaddr;
-	int i;
-	u32 v;
-	u16 val, type;
-	u8 save_exclude;
-
-	/*
-	 * Some versions of the Katana firmware mistakenly change the vendor
-	 * & device id fields in the bridge's pci device (visible via pci
-	 * config accesses).  This breaks mv64x60_init() because those values
-	 * are used to identify the type of bridge that's there.  Artesyn
-	 * claims that the subsystem vendor/device id's will have the correct
-	 * Marvell values so this code puts back the correct values from there.
-	 */
-	memset(&hose, 0, sizeof(hose));
-	vaddr = ioremap(CONFIG_MV64X60_NEW_BASE, MV64x60_INTERNAL_SPACE_SIZE);
-	setup_indirect_pci_nomap(&hose, vaddr + MV64x60_PCI0_CONFIG_ADDR,
-		vaddr + MV64x60_PCI0_CONFIG_DATA);
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_VENDOR_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_VENDOR_ID, val);
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_DEVICE_ID, val);
-	}
-
-	/*
-	 * While we're in here, set the hotswap register correctly.
-	 * Turn off blue LED; mask ENUM#, clear insertion & extraction bits.
-	 */
-	early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	v &= ~(1<<19);
-	v |= ((1<<17) | (1<<22) | (1<<23));
-	early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, v);
-
-	/* While we're at it, grab the bridge type for later */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-	iounmap(vaddr);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = KATANA_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = KATANA_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = KATANA_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = KATANA_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = KATANA_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = KATANA_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = KATANA_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-			MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_WB |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-			((type == PCI_DEVICE_ID_MARVELL_MV64360) ?
-				MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES :
-				MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES);
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = katana_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-
-	/*
-	 * Need to access hotswap reg which is in the pci config area of the
-	 * bridge's hose 0.  Note that pcibios_alloc_controller() can't be used
-	 * to alloc hose_a b/c that would make hose 0 known to the generic
-	 * pci code which we don't want.
-	 */
-	bh.hose_a = &katana_hose_a;
-	setup_indirect_pci_nomap(bh.hose_a,
-		bh.v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh.v_base + MV64x60_PCI0_CONFIG_DATA);
-}
-
-/* Bridge & platform setup routines */
-void __init
-katana_intr_setup(void)
-{
-	if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */
-		mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15);
-
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/* MPP 14 */
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I))
-		mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0x0f000000);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, (1<<14));
-		mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, (1<<14));
-	}
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	if (bh.type == MV64x60_TYPE_MV64360) {
-		/* Erratum FEr PCI-#9 */
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9));
-	} else {
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<8) | (1<<9));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1<<14));
-		mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1<<14));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-katana_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up windows for boot CS, soldered & socketed flash, and CPLD */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 KATANA_BOOT_WINDOW_BASE, KATANA_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Assume firmware set up window sizes correctly for dev 0 & 1 */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, &base,
-		&katana_flash_size_0);
-
-	if (katana_flash_size_0 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			 KATANA_SOLDERED_FLASH_BASE, katana_flash_size_0, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	}
-
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, &base,
-		&katana_flash_size_1);
-
-	if (katana_flash_size_1 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			 (KATANA_SOLDERED_FLASH_BASE + katana_flash_size_0),
-			 katana_flash_size_1, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	}
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		 KATANA_SOCKET_BASE, KATANA_SOCKETED_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		 KATANA_CPLD_BASE, KATANA_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-	cpld_base = ioremap(KATANA_CPLD_BASE, KATANA_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Must wait until window set up before retrieving board id */
-	katana_get_board_id();
-
-	/* Enumerate pci bus (must know board id before getting proc number) */
-	if (katana_get_proc_num() == 0)
-		bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, 0);
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* Only processor zero [on 3750] is an PCI interrupt controller */
-	if (katana_get_proc_num() == 0)
-		katana_intr_setup();
-}
-
-static void __init
-katana_enable_ipmi(void)
-{
-	u8 reset_out;
-
-	/* Enable access to IPMI ctlr by clearing IPMI PORTSEL bit in CPLD */
-	reset_out = in_8(cpld_base + KATANA_CPLD_RESET_OUT);
-	reset_out &= ~KATANA_CPLD_RESET_OUT_PORTSEL;
-	out_8(cpld_base + KATANA_CPLD_RESET_OUT, reset_out);
-}
-
-static void __init
-katana_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 *
-	 * 750FX has only L2E, L2PE (bits 2-8 are reserved)
-	 * DD2.0 has bug that requires the L2 to be in WRT mode
-	 * avoid dirty data in cache
-	 */
-	if (PVR_REV(mfspr(SPRN_PVR)) == 0x0200) {
-		printk(KERN_INFO "DD2.0 detected. Setting L2 cache"
-			"to Writethrough mode\n");
-		_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT);
-	} else
-		_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: calling setup_bridge", 0);
-
-	katana_setup_bridge();
-	katana_setup_peripherals();
-	katana_enable_ipmi();
-
-	katana_bus_frequency = katana_bus_freq(cpld_base);
-
-	printk(KERN_INFO "Artesyn Communication Products, LLC - Katana(TM)\n");
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: exit", 0);
-}
-
-void
-katana_fixup_resources(struct pci_dev *dev)
-{
-	u16	v16;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES>>2);
-
-	pci_read_config_word(dev, PCI_COMMAND, &v16);
-	v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
-	pci_write_config_word(dev, PCI_COMMAND, v16);
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-katana_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return katana_bus_frequency * cpu_750xx[pll_cfg]/2;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-katana_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-	bd_t *bdp = (bd_t *)__res;
-
-	if (bdp->bi_baudrate)
-		pdata->default_baud = bdp->bi_baudrate;
-	else
-		pdata->default_baud = KATANA_DEFAULT_BAUD;
-
-	pdata->max_idle = 40;
-	pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(katana_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-katana_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		KATANA_ETH0_PHY_ADDR,
-		KATANA_ETH1_PHY_ADDR,
-		KATANA_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-#if defined(CONFIG_SYSFS)
-static void __init
-katana_fixup_mv64xxx_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *)
-		pdev->dev.platform_data;
-
-	/* Katana supports the mv64xxx hotswap register */
-	pdata->hs_reg_valid = 1;
-}
-#endif
-
-static int
-katana_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", katana_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", katana_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_SYSFS)
-		{ MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-					BUS_ID_SIZE)) {
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout depends on amount of soldered FLASH in system. Sizes in MB.
- *
- * FLASH Amount:	128	64	32	16
- * -------------	---	--	--	--
- * Monitor:		1	1	1	1
- * Primary Kernel:	1.5	1.5	1.5	1.5
- * Primary fs:		30	30	<end>	<end>
- * Secondary Kernel:	1.5	1.5	N/A	N/A
- * Secondary fs:	<end>	<end>	N/A	N/A
- * User: 		<overlays entire FLASH except for "Monitor" section>
- */
-static int __init
-katana_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = katana_flash_size_0 + katana_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = (size >= (64*MB)) ? 6 : 4;
-
-	if ((ptbl = kcalloc(ptbl_entries, sizeof(struct mtd_partition),
-			GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "Monitor";
-	ptbl[0].size = KATANA_MTD_MONITOR_SIZE;
-	ptbl[1].name = "Primary Kernel";
-	ptbl[1].offset = MTDPART_OFS_NXTBLK;
-	ptbl[1].size = 0x00180000; /* 1.5 MB */
-	ptbl[2].name = "Primary Filesystem";
-	ptbl[2].offset = MTDPART_OFS_APPEND;
-	ptbl[2].size = MTDPART_SIZ_FULL; /* Correct for 16 & 32 MB */
-	ptbl[ptbl_entries-1].name = "User FLASH";
-	ptbl[ptbl_entries-1].offset = KATANA_MTD_MONITOR_SIZE;
-	ptbl[ptbl_entries-1].size = MTDPART_SIZ_FULL;
-
-	if (size >= (64*MB)) {
-		ptbl[2].size = 30*MB;
-		ptbl[3].name = "Secondary Kernel";
-		ptbl[3].offset = MTDPART_OFS_NXTBLK;
-		ptbl[3].size = 0x00180000; /* 1.5 MB */
-		ptbl[4].name = "Secondary Filesystem";
-		ptbl[4].offset = MTDPART_OFS_APPEND;
-		ptbl[4].size = MTDPART_SIZ_FULL;
-	}
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-arch_initcall(katana_setup_mtd);
-#endif
-
-static void
-katana_restart(char *cmd)
-{
-	ulong	i = 10000000;
-
-	/* issue hard reset to the reset command register */
-	out_8(cpld_base + KATANA_CPLD_RST_CMD, KATANA_CPLD_RST_CMD_HR);
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-katana_halt(void)
-{
-	u8	v;
-
-	/* Turn on blue LED to indicate its okay to remove */
-	if (katana_id == KATANA_ID_750I) {
-		u32	v;
-		u8	save_exclude;
-
-		/* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-		v &= 0xff;
-		v |= (1 << 19);
-		early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	} else if (katana_id == KATANA_ID_752I) {
-		   v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF);
-		   v |= HSL_PLD_HOT_SWAP_LED_BIT;
-		   out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v);
-	}
-
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-katana_power_off(void)
-{
-	katana_halt();
-	/* NOTREACHED */
-}
-
-static int
-katana_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu freq\t: %dMHz\n",
-		(katana_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus freq\t: %ldMHz\n",
-		((long)katana_bus_frequency + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
-
-	seq_printf(m, "board\t\t: ");
-	switch (katana_id) {
-	case KATANA_ID_3750:
-		seq_printf(m, "Katana 3750");
-		break;
-
-	case KATANA_ID_750I:
-		seq_printf(m, "Katana 750i");
-		break;
-
-	case KATANA_ID_752I:
-		seq_printf(m, "Katana 752i");
-		break;
-
-	default:
-		seq_printf(m, "Unknown");
-		break;
-	}
-	seq_printf(m, " (product id: 0x%x)\n",
-		   in_8(cpld_base + KATANA_CPLD_PRODUCT_ID));
-
-	seq_printf(m, "pci mode\t: %sMonarch\n",
-		katana_is_monarch()? "" : "Non-");
-	seq_printf(m, "hardware rev\t: 0x%x\n",
-		   in_8(cpld_base+KATANA_CPLD_HARDWARE_VER));
-	seq_printf(m, "pld rev\t\t: 0x%x\n",
-		   in_8(cpld_base + KATANA_CPLD_PLD_VER));
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-katana_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = katana_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*
- * The katana supports both uImage and zImage.  If uImage, get the mem size
- * from the bd info.  If zImage, the bootwrapper adds a BI_MEMSIZE entry in
- * the bi_rec data which is sucked out and put into boot_mem_size by
- * parse_bootinfo().  MMU_init() will then use the boot_mem_size for the mem
- * size and not call this routine.  The only way this will fail is when a uImage
- * is used but the fw doesn't pass in a valid bi_memsize.  This should never
- * happen, though.
- */
-unsigned long __init
-katana_find_end_of_memory(void)
-{
-	bd_t *bdp = (bd_t *)__res;
-	return bdp->bi_memsize;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-katana_map_io(void)
-{
-	io_block_mapping(0xf8100000, 0xf8100000, 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = katana_setup_arch;
-	ppc_md.pcibios_fixup_resources = katana_fixup_resources;
-	ppc_md.show_cpuinfo = katana_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = katana_restart;
-	ppc_md.power_off = katana_power_off;
-	ppc_md.halt = katana_halt;
-	ppc_md.find_end_of_memory = katana_find_end_of_memory;
-	ppc_md.calibrate_decr = katana_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = katana_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = katana_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h
deleted file mode 100644
index 0a9b036526b1..000000000000
--- a/arch/ppc/platforms/katana.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Definitions for Artesyn Katana750i/3750 board.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64 KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xf8400000-0xf843ffff      - Internal SRAM
- *    0xf8200000-0xf83fffff      - CPLD
- *    0xf8100000-0xf810ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xf8000000-0xf80fffff      - Socketed FLASH
- *    0xe0000000-0xefffffff      - Soldered FLASH
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_KATANA_H
-#define __PPC_PLATFORMS_KATANA_H
-
-/* CPU Physical Memory Map setup. */
-#define KATANA_BOOT_WINDOW_BASE			0xff800000
-#define KATANA_BOOT_WINDOW_SIZE			0x00800000 /* 8 MB */
-#define KATANA_INTERNAL_SRAM_BASE		0xf8400000
-#define KATANA_CPLD_BASE			0xf8200000
-#define KATANA_CPLD_SIZE			0x00200000 /* 2 MB */
-#define KATANA_SOCKET_BASE			0xf8000000
-#define KATANA_SOCKETED_FLASH_SIZE		0x00100000 /* 1 MB */
-#define KATANA_SOLDERED_FLASH_BASE		0xe0000000
-#define KATANA_SOLDERED_FLASH_SIZE		0x10000000 /* 256 MB */
-
-#define KATANA_PCI1_MEM_START_PROC_ADDR         0x80000000
-#define KATANA_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define KATANA_PCI1_MEM_START_PCI_LO_ADDR       0x80000000
-#define KATANA_PCI1_MEM_SIZE                    0x40000000 /* 1 GB */
-#define KATANA_PCI1_IO_START_PROC_ADDR          0xc0000000
-#define KATANA_PCI1_IO_START_PCI_ADDR           0x00000000
-#define KATANA_PCI1_IO_SIZE                     0x04000000 /* 64 MB */
-
-/* Board-specific IRQ info */
-#define  KATANA_PCI_INTA_IRQ_3750		(64+8)
-#define  KATANA_PCI_INTB_IRQ_3750		(64+9)
-#define  KATANA_PCI_INTC_IRQ_3750		(64+10)
-
-#define  KATANA_PCI_INTA_IRQ_750i		(64+8)
-#define  KATANA_PCI_INTB_IRQ_750i		(64+9)
-#define  KATANA_PCI_INTC_IRQ_750i		(64+10)
-#define  KATANA_PCI_INTD_IRQ_750i		(64+14)
-
-#define KATANA_CPLD_RST_EVENT			0x00000000
-#define KATANA_CPLD_RST_CMD			0x00001000
-#define KATANA_CPLD_PCI_ERR_INT_EN		0x00002000
-#define KATANA_CPLD_PCI_ERR_INT_PEND		0x00003000
-#define KATANA_CPLD_PRODUCT_ID			0x00004000
-#define KATANA_CPLD_EREADY			0x00005000
-
-#define KATANA_CPLD_HARDWARE_VER		0x00007000
-#define KATANA_CPLD_PLD_VER			0x00008000
-#define KATANA_CPLD_BD_CFG_0			0x00009000
-#define KATANA_CPLD_BD_CFG_1			0x0000a000
-#define KATANA_CPLD_BD_CFG_3			0x0000c000
-#define KATANA_CPLD_LED				0x0000d000
-#define KATANA_CPLD_RESET_OUT			0x0000e000
-
-#define KATANA_CPLD_RST_EVENT_INITACT		0x80
-#define KATANA_CPLD_RST_EVENT_SW		0x40
-#define KATANA_CPLD_RST_EVENT_WD		0x20
-#define KATANA_CPLD_RST_EVENT_COPS		0x10
-#define KATANA_CPLD_RST_EVENT_COPH		0x08
-#define KATANA_CPLD_RST_EVENT_CPCI		0x02
-#define KATANA_CPLD_RST_EVENT_FP		0x01
-
-#define KATANA_CPLD_RST_CMD_SCL			0x80
-#define KATANA_CPLD_RST_CMD_SDA			0x40
-#define KATANA_CPLD_RST_CMD_I2C			0x10
-#define KATANA_CPLD_RST_CMD_FR			0x08
-#define KATANA_CPLD_RST_CMD_SR			0x04
-#define KATANA_CPLD_RST_CMD_HR			0x01
-
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK	0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_200		0x00
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_166		0x80
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_133		0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_100		0x40
-
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK	0x03
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB	0x01
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB	0x02
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB	0x03
-
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK	0x04
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO	0x04
-
-#define KATANA_CPLD_BD_CFG_3_MONARCH		0x04
-
-#define KATANA_CPLD_RESET_OUT_PORTSEL		0x80
-#define KATANA_CPLD_RESET_OUT_WD		0x20
-#define KATANA_CPLD_RESET_OUT_COPH		0x08
-#define KATANA_CPLD_RESET_OUT_PCI_RST_PCI	0x02
-#define KATANA_CPLD_RESET_OUT_PCI_RST_FP	0x01
-
-#define KATANA_MBOX_RESET_REQUEST		0xC83A
-#define KATANA_MBOX_RESET_ACK			0xE430
-#define KATANA_MBOX_RESET_DONE			0x32E5
-
-#define HSL_PLD_BASE				0x00010000
-#define HSL_PLD_J4SGA_REG_OFF			0
-#define HSL_PLD_J4GA_REG_OFF			1
-#define HSL_PLD_J2GA_REG_OFF			2
-#define HSL_PLD_HOT_SWAP_OFF			6
-#define HSL_PLD_HOT_SWAP_LED_BIT		0x1
-#define GA_MASK					0x1f
-#define HSL_PLD_SIZE				0x1000
-#define K3750_GPP_GEO_ADDR_PINS			0xf8000000
-#define K3750_GPP_GEO_ADDR_SHIFT		27
-
-#define K3750_GPP_EVENT_PROC_0			(1 << 21)
-#define K3750_GPP_EVENT_PROC_1_2		(1 << 2)
-
-#define PCI_VENDOR_ID_ARTESYN			0x1223
-#define PCI_DEVICE_ID_KATANA_3750_PROC0		0x0041
-#define PCI_DEVICE_ID_KATANA_3750_PROC1		0x0042
-#define PCI_DEVICE_ID_KATANA_3750_PROC2		0x0043
-
-#define COPROC_MEM_FUNCTION			0
-#define COPROC_MEM_BAR				0
-#define COPROC_REGS_FUNCTION			0
-#define COPROC_REGS_BAR				4
-#define COPROC_FLASH_FUNCTION			2
-#define COPROC_FLASH_BAR			4
-
-#define KATANA_IPMB_LOCAL_I2C_ADDR		0x08
-
-#define	KATANA_DEFAULT_BAUD			9600
-#define	KATANA_MPSC_CLK_SRC			8	  /* TCLK */
-
-#define	KATANA_MTD_MONITOR_SIZE			(1 << 20) /* 1 MB */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define KATANA_PRODUCT_ID_3750			0x01
-#define KATANA_PRODUCT_ID_750i			0x02
-#define KATANA_PRODUCT_ID_752i			0x04
-
-#define KATANA_ETH_TX_QUEUE_SIZE		800
-#define KATANA_ETH_RX_QUEUE_SIZE		400
-
-#define	KATANA_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	KATANA_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	KATANA_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	KATANA_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-#ifndef __ASSEMBLY__
-
-typedef enum {
-	KATANA_ID_3750,
-	KATANA_ID_750I,
-	KATANA_ID_752I,
-	KATANA_ID_MAX
-} katana_id_t;
-
-#endif
-
-static inline u32
-katana_bus_freq(void __iomem *cpld_base)
-{
-	u8 bd_cfg_0;
-
-	bd_cfg_0 = in_8(cpld_base + KATANA_CPLD_BD_CFG_0);
-
-	switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
-		return 200000000;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
-		return 166666666;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
-		return 133333333;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
-		return 100000000;
-		break;
-
-	default:
-		return 133333333;
-		break;
-	}
-}
-
-#endif	/* __PPC_PLATFORMS_KATANA_H */
diff --git a/arch/ppc/platforms/lantec.h b/arch/ppc/platforms/lantec.h
deleted file mode 100644
index 5e5eb6d0f6aa..000000000000
--- a/arch/ppc/platforms/lantec.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * LANTEC board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LANTEC_H
-#define __MACH_LANTEC_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LANTEC_H */
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
deleted file mode 100644
index b9e9db63f65b..000000000000
--- a/arch/ppc/platforms/lite5200.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Platform support file for the Freescale LITE5200 based on MPC52xx.
- * A maximum of this file should be moved to syslib/mpc52xx_?????
- * so that new platform based on MPC52xx need a minimal platform file
- * ( avoid code duplication )
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on the 2.4 code written by Kent Borg,
- * Dale Farnsworth <dale.farnsworth@mvista.com> and
- * Wolfgang Denk <wd@denx.de>
- * 
- * Copyright 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright 2003 Motorola Inc.
- * Copyright 2003 MontaVista Software Inc.
- * Copyright 2003 DENX Software Engineering (wd@denx.de)
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/console.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-extern int powersave_nap;
-
-/* Board data given by U-Boot */
-bd_t __res;
-EXPORT_SYMBOL(__res);	/* For modules */
-
-
-/* ======================================================================== */
-/* Platform specific code                                                   */
-/* ======================================================================== */
-
-/* Supported PSC function in "preference" order */
-struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
-		{       .id     = 0,
-			.func   = "uart",
-		},
-		{       .id     = -1,   /* End entry */
-			.func   = NULL,
-		}
-	};
-
-
-static int
-lite5200_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Freescale LITE5200\n");
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_LITE5200B
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *        A             B             C             D
-	 */
-	{
-		{MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
-		{MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
-	};
-
-	const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-#else /* Original Lite */
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
-}
-#endif
-#endif
-
-static void __init
-lite5200_setup_cpu(void)
-{
-	struct mpc52xx_gpio __iomem *gpio;
-	struct mpc52xx_intr __iomem *intr;
-
-	u32 port_config;
-	u32 intr_ctrl;
-
-	/* Map zones */
-	gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-
-	if (!gpio || !intr) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping GPIO/INTR during "
-			"lite5200_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Get port mux config */
-	port_config = in_be32(&gpio->port_config);
-
-	/* 48Mhz internal, pin is GPIO */
-	port_config &= ~0x00800000;
-
-	/* USB port */
-	port_config &= ~0x00007000;	/* Differential mode - USB1 only */
-	port_config |=  0x00001000;
-
-	/* ATA CS is on csb_4/5 */
-	port_config &= ~0x03000000;
-	port_config |=  0x01000000;
-
-	/* Commit port config */
-	out_be32(&gpio->port_config, port_config);
-
-	/* IRQ[0-3] setup */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &= ~0x00ff0000;
-#ifdef CONFIG_LITE5200B
-	/* IRQ[0-3] Level Active Low */
-	intr_ctrl |=  0x00ff0000;
-#else
-	/* IRQ0 Level Active Low
-	 * IRQ[1-3] Level Active High */
- 	intr_ctrl |=  0x00c00000;
-#endif
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (gpio) iounmap(gpio);
-	if (intr) iounmap(intr);
-}
-
-static void __init
-lite5200_setup_arch(void)
-{
-	/* CPU & Port mux setup */
-	mpc52xx_setup_cpu();	/* Generic */
-	lite5200_setup_cpu();	/* Platform specific */
-
-#ifdef CONFIG_PCI
-	/* PCI Bridge setup */
-	mpc52xx_find_bridges();
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-              unsigned long r6, unsigned long r7)
-{
-	/* Generic MPC52xx platform initialization */
-	/* TODO Create one and move a max of stuff in it.
-	   Put this init in the syslib */
-
-	struct bi_record *bootinfo = find_bootinfo();
-
-	if (bootinfo)
-		parse_bootinfo(bootinfo);
-	else {
-		/* Load the bd_t board info structure */
-		if (r3)
-			memcpy((void*)&__res,(void*)(r3+KERNELBASE),
-					sizeof(bd_t));
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		/* Load the initrd */
-		if (r4) {
-			initrd_start = r4 + KERNELBASE;
-			initrd_end = r5 + KERNELBASE;
-		}
-#endif
-
-		/* Load the command line */
-		if (r6) {
-			*(char *)(r7+KERNELBASE) = 0;
-			strcpy(cmd_line, (char *)(r6+KERNELBASE));
-		}
-	}
-
-	/* PPC Sys identification */
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* BAT setup */
-	mpc52xx_set_bat();
-
-	/* No ISA bus by default */
-#ifdef CONFIG_PCI
-	isa_io_base		= 0;
-	isa_mem_base		= 0;
-#endif
-
-	/* Powersave */
-	/* This is provided as an example on how to do it. But you
-	   need to be aware that NAP disable bus snoop and that may
-	   be required for some devices to work properly, like USB ... */
-	/* powersave_nap = 1; */
-
-
-	/* Setup the ppc_md struct */
-	ppc_md.setup_arch	= lite5200_setup_arch;
-	ppc_md.show_cpuinfo	= lite5200_show_cpuinfo;
-	ppc_md.show_percpuinfo	= NULL;
-	ppc_md.init_IRQ		= mpc52xx_init_irq;
-	ppc_md.get_irq		= mpc52xx_get_irq;
-
-#ifdef CONFIG_PCI
-	ppc_md.pci_map_irq	= lite5200_map_irq;
-#endif
-
-	ppc_md.find_end_of_memory = mpc52xx_find_end_of_memory;
-	ppc_md.setup_io_mappings  = mpc52xx_map_io;
-
-	ppc_md.restart		= mpc52xx_restart;
-	ppc_md.power_off	= mpc52xx_power_off;
-	ppc_md.halt		= mpc52xx_halt;
-
-		/* No time keeper on the LITE5200 */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-
-	ppc_md.calibrate_decr	= mpc52xx_calibrate_decr;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress		= mpc52xx_progress;
-#endif
-}
-
diff --git a/arch/ppc/platforms/lite5200.h b/arch/ppc/platforms/lite5200.h
deleted file mode 100644
index 852a18e24d0b..000000000000
--- a/arch/ppc/platforms/lite5200.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Definitions for Freescale LITE5200 : MPC52xx Standard Development
- * Platform board support
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __PLATFORMS_LITE5200_H__
-#define __PLATFORMS_LITE5200_H__
-
-/* Serial port used for low-level debug */
-#define MPC52xx_PF_CONSOLE_PORT 1	/* PSC1 */
-
-
-#endif /* __PLATFORMS_LITE5200_H__ */
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
deleted file mode 100644
index 1e3aa6e9b6c7..000000000000
--- a/arch/ppc/platforms/lopec.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Setup routines for the Motorola LoPEC.
- *
- * Author: Dan Cox
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/pci_ids.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/io.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/hw_irq.h>
-#include <asm/prep_nvram.h>
-#include <asm/kgdb.h>
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * LoPEC Programmer's Reference Guide.
- */
-static u_char lopec_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 6 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 13 */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),	/* IRQ 14 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* IRQ 15 */
-};
-
-static inline int __init
-lopec_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-	static char pci_irq_table[][4] = {
-		{16, 0, 0, 0}, /* ID 11 - Winbond */
-		{22, 0, 0, 0}, /* ID 12 - SCSI */
-		{0, 0, 0, 0}, /* ID 13 - nothing */
-		{17, 0, 0, 0}, /* ID 14 - 82559 Ethernet */
-		{27, 0, 0, 0}, /* ID 15 - USB */
-		{23, 0, 0, 0}, /* ID 16 - PMC slot 1 */
-		{24, 0, 0, 0}, /* ID 17 - PMC slot 2 */
-		{25, 0, 0, 0}, /* ID 18 - PCI slot */
-		{0, 0, 0, 0}, /* ID 19 - nothing */
-		{0, 0, 0, 0}, /* ID 20 - nothing */
-		{0, 0, 0, 0}, /* ID 21 - nothing */
-		{0, 0, 0, 0}, /* ID 22 - nothing */
-		{0, 0, 0, 0}, /* ID 23 - nothing */
-		{0, 0, 0, 0}, /* ID 24 - PMC slot 1b */
-		{0, 0, 0, 0}, /* ID 25 - nothing */
-		{0, 0, 0, 0}  /* ID 26 - PMC Slot 2b */
-	};
-	const long min_idsel = 11, max_idsel = 26, irqs_per_slot = 4;
-
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	if (!irq)
-		return 0;
-
-	return irq;
-}
-
-static void __init
-lopec_setup_winbond_83553(struct pci_controller *hose)
-{
-	int devfn;
-
-	devfn = PCI_DEVFN(11,0);
-
-	/* IDE interrupt routing (primary 14, secondary 15) */
-	early_write_config_byte(hose, 0, devfn, 0x43, 0xef);
-	/* PCI interrupt routing */
-	early_write_config_word(hose, 0, devfn, 0x44, 0x0000);
-
-	/* ISA-PCI address decoder */
-	early_write_config_byte(hose, 0, devfn, 0x48, 0xf0);
-
-	/* RTC, kb, not used in PPC */
-	early_write_config_byte(hose, 0, devfn, 0x4d, 0x00);
-	early_write_config_byte(hose, 0, devfn, 0x4e, 0x04);
-	devfn = PCI_DEVFN(11, 1);
-	early_write_config_byte(hose, 0, devfn, 0x09, 0x8f);
-	early_write_config_dword(hose, 0, devfn, 0x40, 0x00ff0011);
-}
-
-static void __init
-lopec_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose, MPC10X_MEM_MAP_B, MPC10X_MEM_MAP_B,
-				MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-		lopec_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-		ppc_md.pci_swizzle = common_swizzle;
-		ppc_md.pci_map_irq = lopec_map_irq;
-	}
-}
-
-static int
-lopec_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Motorola LoPEC\n");
-	return 0;
-}
-
-static void
-lopec_restart(char *cmd)
-{
-#define LOPEC_SYSSTAT1 0xffe00000
-	/* force a hard reset, if possible */
-	unsigned char reg = *((unsigned char *) LOPEC_SYSSTAT1);
-	reg |= 0x80;
-	*((unsigned char *) LOPEC_SYSSTAT1) = reg;
-
-	local_irq_disable();
-	while(1);
-#undef LOPEC_SYSSTAT1
-}
-
-static void
-lopec_halt(void)
-{
-	local_irq_disable();
-	while(1);
-}
-
-static void
-lopec_power_off(void)
-{
-	lopec_halt();
-}
-
-static void __init
-lopec_init_IRQ(void)
-{
-	int i;
-
-	/*
-	 * Provide the open_pic code with the correct table of interrupts.
-	 */
-	OpenPIC_InitSenses = lopec_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
-
-	mpc10x_set_openpic();
-
-	/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static int __init
-lopec_request_io(void)
-{
-	outb(0x00, 0x4d0);
-	outb(0xc0, 0x4d1);
-
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x20, 0x20, "pic1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0xc0, 0x20, "dma2");
-
-	return 0;
-}
-
-device_initcall(lopec_request_io);
-
-static void __init
-lopec_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xb0000000, 0xb0000000, 0x10000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-lopec_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-TODC_ALLOC();
-
-static void __init
-lopec_setup_arch(void)
-{
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(0xffe80000, 0x8000), 8);
-
-	loops_per_jiffy = 100000000/HZ;
-
-	lopec_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#elif defined(CONFIG_ROOT_NFS)
-        	ROOT_DEV = Root_NFS;
-#elif defined(CONFIG_BLK_DEV_IDEDISK)
-	        ROOT_DEV = Root_HDA1;
-#else
-        	ROOT_DEV = Root_SDA1;
-#endif
-
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	lopec_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = lopec_setup_arch;
-	ppc_md.show_cpuinfo = lopec_show_cpuinfo;
-	ppc_md.init_IRQ = lopec_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = lopec_restart;
-	ppc_md.power_off = lopec_power_off;
-	ppc_md.halt = lopec_halt;
-
-	ppc_md.setup_io_mappings = lopec_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/lopec.h b/arch/ppc/platforms/lopec.h
deleted file mode 100644
index d597b6878693..000000000000
--- a/arch/ppc/platforms/lopec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/ppc/platforms/lopec.h
- *
- * Definitions for Motorola LoPEC board.
- *
- * Author: Dan Cox
- *         danc@mvista.com (or, alternately, source@mvista.com)
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __H_LOPEC_SERIAL
-#define __H_LOPEC_SERIAL
-
-#define RS_TABLE_SIZE 3
-
-#define BASE_BAUD (1843200 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define SERIAL_PORT_DFNS \
-         { 0, BASE_BAUD, 0xffe10000, 29, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe10000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe11000, 20, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe11000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe12000, 21, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe12000, \
-           io_type: SERIAL_IO_MEM }
-
-#endif
diff --git a/arch/ppc/platforms/lwmon.h b/arch/ppc/platforms/lwmon.h
deleted file mode 100644
index e63f3b07a5db..000000000000
--- a/arch/ppc/platforms/lwmon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Liebherr LWMON board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LWMON_H
-#define __MACH_LWMON_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used			*/
-
-#define	IDE0_INTERRUPT			13
-
-/*
- * Definitions for I2C devices
- */
-#define I2C_ADDR_AUDIO		0x28	/* Audio volume control			*/
-#define I2C_ADDR_SYSMON		0x2E	/* LM87 System Monitor			*/
-#define I2C_ADDR_RTC		0x51	/* PCF8563 RTC				*/
-#define I2C_ADDR_POWER_A	0x52	/* PCMCIA/USB power switch, channel A	*/
-#define I2C_ADDR_POWER_B	0x53	/* PCMCIA/USB power switch, channel B	*/
-#define I2C_ADDR_KEYBD		0x56	/* PIC LWE keyboard			*/
-#define I2C_ADDR_PICIO		0x57	/* PIC IO Expander			*/
-#define I2C_ADDR_EEPROM		0x58	/* EEPROM AT24C164			*/
-
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LWMON_H */
diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h
deleted file mode 100644
index 1cf36fa3592d..000000000000
--- a/arch/ppc/platforms/mbx.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MBX boards.  This was originally created for the
- * MBX860, and probably needs revisions for other boards (like the 821).
- * When this file gets out of control, we can split it up into more
- * meaningful pieces.
- *
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_MBX_DEFS
-#define __MACH_MBX_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * EPPC-Bug starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_tag;		/* Should be 0x42444944 "BDID" */
-	unsigned int	bi_size;	/* Size of this structure */
-	unsigned int	bi_revision;	/* revision of this structure */
-	unsigned int	bi_bdate;	/* EPPCbug date, i.e. 0x11061997 */
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned int	bi_clun;	/* Boot device controller */
-	unsigned int	bi_dlun;	/* Boot device logical dev */
-
-	/* These fields are not part of the board information structure
-	 * provided by the boot rom.  They are filled in by embed_config.c
-	 * so we have the information consistent with other platforms.
-	 */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-/* Memory map for the MBX as configured by EPPC-Bug.  We could reprogram
- * The SIU and PCI bridge, and try to use larger MMU pages, but the
- * performance gain is not measurable and it certainly complicates the
- * generic MMU model.
- *
- * In a effort to minimize memory usage for embedded applications, any
- * PCI driver or ISA driver must request or map the region required by
- * the device.  For convenience (and since we can map up to 4 Mbytes with
- * a single page table page), the MMU initialization will map the
- * NVRAM, Status/Control registers, CPM Dual Port RAM, and the PCI
- * Bridge CSRs 1:1 into the kernel address space.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_IDE_ADDR		((unsigned)0x81000000)
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_DMA_ADDR		((uint)0xe4000000)
-#define PCMCIA_DMA_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(64 * 1024 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xec000000)
-#define PCMCIA_IO_SIZE		((uint)(64 * 1024 * 1024))
-#define NVRAM_ADDR		((uint)0xfa000000)
-#define NVRAM_SIZE		((uint)(1 * 1024 * 1024))
-#define MBX_CSR_ADDR		((uint)0xfa100000)
-#define MBX_CSR_SIZE		((uint)(1 * 1024 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0xfa210000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-
-/* Map additional physical space into well known virtual addresses.  Due
- * to virtual address mapping, these physical addresses are not accessible
- * in a 1:1 virtual to physical mapping.
- */
-#define ISA_IO_VIRT_ADDR	((uint)0xfa220000)
-#define ISA_IO_VIRT_SIZE	((uint)64 * 1024)
-
-/* Interrupt assignments.
- * These are defined (and fixed) by the MBX hardware implementation.
- */
-#define POWER_FAIL_INT	SIU_IRQ0	/* Power fail */
-#define TEMP_HILO_INT	SIU_IRQ1	/* Temperature sensor */
-#define QSPAN_INT	SIU_IRQ2	/* PCI Bridge (DMA CTLR?) */
-#define ISA_BRIDGE_INT	SIU_IRQ3	/* All those PC things */
-#define COMM_L_INT	SIU_IRQ6	/* MBX Comm expansion connector pin */
-#define STOP_ABRT_INT	SIU_IRQ7	/* Stop/Abort header pin */
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* The MBX uses the 8259.
-*/
-#define NR_8259_INTS	16
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_MBX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
deleted file mode 100644
index 62370f4a5a0f..000000000000
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*arch/ppc/platforms/mpc866ads_setup.c
- *
- * Platform setup for the Freescale mpc866ads board
- *
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright 2005-2006 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-
-#include <linux/fs_enet_pd.h>
-#include <linux/fs_uart_pd.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/ppcboot.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/ppc_sys.h>
-#include <asm/mpc8xx.h>
-
-extern unsigned char __res[];
-
-static void setup_fec1_ioports(struct fs_platform_info*);
-static void setup_scc1_ioports(struct fs_platform_info*);
-static void setup_smc1_ioports(struct fs_uart_platform_info*);
-static void setup_smc2_ioports(struct fs_uart_platform_info*);
-
-static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
-
-static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
-
-static struct fs_platform_info mpc8xx_enet_pdata[] = {
-	[fsid_fec1] = {
-		.rx_ring = 128,
-		.tx_ring = 16,
-		.rx_copybreak = 240,
-
-		.use_napi = 1,
-		.napi_weight = 17,
-
-		.init_ioports = setup_fec1_ioports,
-
-		.bus_id = "0:0f",
-		.has_phy = 1,
-	},
-	[fsid_scc1] = {
-		.rx_ring = 64,
-		.tx_ring = 8,
-		.rx_copybreak = 240,
-		.use_napi = 1,
-		.napi_weight = 17,
-
-
-		.init_ioports = setup_scc1_ioports,
-
-		.bus_id = "fixed@100:1",
-	},
-};
-
-static struct fs_uart_platform_info mpc866_uart_pdata[] = {
-	[fsid_smc1_uart] = {
-		.brg		= 1,
- 		.fs_no 		= fsid_smc1_uart,
- 		.init_ioports	= setup_smc1_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
- 	[fsid_smc2_uart] = {
- 		.brg		= 2,
- 		.fs_no 		= fsid_smc2_uart,
- 		.init_ioports	= setup_smc2_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
-};
-
-void __init board_init(void)
-{
-	volatile cpm8xx_t *cp = cpmp;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
-	clrbits32(bcsr_io,(0x80000000 >> 7));
-	cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	setbits32(bcsr_io,(0x80000000 >> 7));
-
-	cp->cp_pbpar &= ~(0x000000c0);
-	cp->cp_pbdir |= 0x000000c0;
-	cp->cp_smc[0].smc_smcmr = 0;
-	cp->cp_smc[0].smc_smce = 0;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cp->cp_simode &= ~(0xe0000000 >> 1);
-	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_pbpar &= ~(0x00000c00);
-	cp->cp_pbdir |= 0x00000c00;
-	cp->cp_smc[1].smc_smcmr = 0;
-	cp->cp_smc[1].smc_smce = 0;
-#endif
-	iounmap(bcsr_io);
-}
-
-static void setup_fec1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-
-	setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
-	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
-}
-
-static void setup_scc1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	/* Enable the PHY.
-	 */
-	clrbits32(bcsr_io,BCSR1_ETHEN);
-
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
-
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
-	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
-	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
-	/* Configure port A for TCLK and RCLK.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
-	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
-
-	/* In the original SCC enet driver the following code is placed at
-	the end of the initialization */
-	setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-}
-
-static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x000000c0;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_1);
-	iounmap(bcsr_io);
-
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-
-}
-
-static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x00000c00;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_2);
-
-	iounmap(bcsr_io);
-
-#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-#else
-	setbits16(&immap->im_ioport.iop_papar, iobits);
-	clrbits16(&immap->im_ioport.iop_padir, iobits);
-	clrbits16(&immap->im_ioport.iop_paodr, iobits);
-#endif
-
-}
-
-static int ma_count = 0;
-
-static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
-{
-	struct fs_platform_info *fpi;
-
-	volatile cpm8xx_t *cp;
-	bd_t *bd = (bd_t *) __res;
-	char *e;
-	int i;
-
-	/* Get pointer to Communication Processor */
-	cp = cpmp;
-
-	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
-		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
-		return;
-	}
-
-
-	fpi = &mpc8xx_enet_pdata[fs_no];
-	fpi->fs_no = fs_no;
-	pdev->dev.platform_data = fpi;
-
-	e = (unsigned char *)&bd->bi_enetaddr;
-	for (i = 0; i < 6; i++)
-		fpi->macaddr[i] = *e++;
-
-	fpi->macaddr[5] += ma_count++;
-}
-
-static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for FEC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
-		return;
-	mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
-}
-
-static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for SCC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
-		return;
-
-	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
-}
-
-static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
-                                              int idx)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-	int num = ARRAY_SIZE(mpc866_uart_pdata);
-
-	int id = fs_uart_id_smc2fsid(idx);
-
-	/* no need to alter anything if console */
-	if ((id < num) && (!pdev->dev.platform_data)) {
-		pinfo = &mpc866_uart_pdata[id];
-		pinfo->uart_clk = bd->bi_intfreq;
-		pdev->dev.platform_data = pinfo;
-	}
-}
-
-static int mpc866ads_platform_notify(struct device *dev)
-{
-	static const struct platform_notify_dev_map dev_map[] = {
-		{
-			.bus_id = "fsl-cpm-fec",
-			.rtn = mpc866ads_fixup_fec_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-scc",
-			.rtn = mpc866ads_fixup_scc_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-smc:uart",
-			.rtn = mpc866ads_fixup_uart_pdata
-		},
-		{
-			.bus_id = NULL
-		}
-	};
-
-	platform_notify_map(dev_map,dev);
-
-	return 0;
-}
-
-int __init mpc866ads_init(void)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_mii_fec_platform_info* fmpi;
-
-	printk(KERN_NOTICE "mpc866ads: Init\n");
-
-	platform_notify = mpc866ads_platform_notify;
-
-	ppc_sys_device_initfunc();
-	ppc_sys_device_disable_all();
-
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1
-	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
-#endif
-	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
-
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-/* Since either of the uarts could be used as console, they need to ready */
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
-#endif
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-	return 0;
-}
-
-/*
-   To prevent confusion, console selection is gross:
-   by 0 assumed SMC1 and by 1 assumed SMC2
- */
-struct platform_device* early_uart_get_pdev(int index)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-
-	struct platform_device* pdev = NULL;
-	if(index) { /*assume SMC2 here*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
-		pinfo = &mpc866_uart_pdata[1];
-	} else { /*over SMC1*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
-		pinfo = &mpc866_uart_pdata[0];
-	}
-
-	pinfo->uart_clk = bd->bi_intfreq;
-	pdev->dev.platform_data = pinfo;
-	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
-	return NULL;
-}
-
-arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
deleted file mode 100644
index 053b54ac88f2..000000000000
--- a/arch/ppc/platforms/mvme5100.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board setup routines for the Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include <platforms/pplus.h>
-#include <platforms/mvme5100.h>
-
-static u_char mvme5100_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */
-};
-
-static inline int
-mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{  0,  0,  0,  0 },	/* IDSEL 11 - Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 21, 22, 23, 24 },	/* IDSEL 13 - Universe II */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 1 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - unused */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 20 - PMCSPAN */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	/* If lookup is zero, always return 0 */
-	if (!irq)
-		return 0;
-	else
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	/* If IPMC761 present, return table value */
-	return irq;
-#else
-	/* If IPMC761 not present, we don't have an i8259 so adjust */
-	return (irq - NUM_8259_INTERRUPTS);
-#endif
-}
-
-static void
-mvme5100_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-			(dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK))
-		for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
-		{
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-		}
-}
-
-static void __init
-mvme5100_setup_bridge(void)
-{
-	struct pci_controller*	hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO,
-			MVME5100_PCI_UPPER_IO, IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM,
-			MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MVME5100_PCI_LOWER_IO;
-	hose->io_space.end = MVME5100_PCI_UPPER_IO;
-	hose->mem_space.start = MVME5100_PCI_LOWER_MEM;
-	hose->mem_space.end = MVME5100_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE;
-
-	/* Use indirect method of Hawk */
-	setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR,
-			MVME5100_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mvme5100_map_irq;
-}
-
-static void __init
-mvme5100_setup_arch(void)
-{
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: enter", 0);
-
-	loops_per_jiffy = 50000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	mvme5100_setup_bridge();
-
-	/* Find and map our OpenPIC */
-	hawk_mpic_init(MVME5100_PCI_MEM_OFFSET);
-	OpenPIC_InitSenses = mvme5100_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses);
-
-	printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: exit", 0);
-
-	return;
-}
-
-static void __init
-mvme5100_init2(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-		request_region(0x00,0x20,"dma1");
-		request_region(0x20,0x20,"pic1");
-		request_region(0x40,0x20,"timer");
-		request_region(0x80,0x10,"dma page reg");
-		request_region(0xa0,0x20,"pic2");
-		request_region(0xc0,0x20,"dma2");
-#endif
-	return;
-}
-
-/*
- * Interrupt setup and service.
- * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
- */
-static void __init
-mvme5100_init_IRQ(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	int i;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: enter", 0);
-
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	openpic_init(NUM_8259_INTERRUPTS);
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	i8259_init(0, 0);
-#else
-	openpic_init(0);
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: exit", 0);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-mvme5100_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-static unsigned long __init
-mvme5100_find_end_of_memory(void)
-{
-	return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);
-}
-
-static void __init
-mvme5100_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-	ioremap_base = 0xfe000000;
-}
-
-static void
-mvme5100_reset_board(void)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01);
-
-	return;
-}
-
-static void
-mvme5100_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	mvme5100_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-mvme5100_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-mvme5100_power_off(void)
-{
-	mvme5100_halt();
-}
-
-static int
-mvme5100_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola\n");
-	seq_printf(m, "machine\t\t: MVME5100\n");
-
-	return 0;
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	mvme5100_set_bat();
-
-	isa_io_base = MVME5100_ISA_IO_BASE;
-	isa_mem_base = MVME5100_ISA_MEM_BASE;
-	pci_dram_offset = MVME5100_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = mvme5100_setup_arch;
-	ppc_md.show_cpuinfo = mvme5100_show_cpuinfo;
-	ppc_md.init_IRQ = mvme5100_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = mvme5100_init2;
-
-	ppc_md.restart = mvme5100_restart;
-	ppc_md.power_off = mvme5100_power_off;
-	ppc_md.halt = mvme5100_halt;
-
-	ppc_md.find_end_of_memory = mvme5100_find_end_of_memory;
-	ppc_md.setup_io_mappings = mvme5100_map_io;
-
-	TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1,
-			MVME5100_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-}
diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h
deleted file mode 100644
index fbb5495165c7..000000000000
--- a/arch/ppc/platforms/mvme5100.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/ppc/platforms/mvme5100.h
- *
- * Definitions for Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MVME5100_H__
-#define __ASM_MVME5100_H__
-
-#define MVME5100_HAWK_SMC_BASE		0xfef80000
-
-#define	MVME5100_PCI_CONFIG_ADDR	0xfe000cf8
-#define	MVME5100_PCI_CONFIG_DATA	0xfe000cfc
-
-#define MVME5100_PCI_IO_BASE		0xfe000000
-#define MVME5100_PCI_MEM_BASE		0x80000000
-
-#define MVME5100_PCI_MEM_OFFSET		0x00000000
-
-#define MVME5100_PCI_DRAM_OFFSET	0x00000000
-#define MVME5100_ISA_MEM_BASE		0x00000000
-#define MVME5100_ISA_IO_BASE		MVME5100_PCI_IO_BASE
-
-#define MVME5100_PCI_LOWER_MEM		0x80000000
-#define MVME5100_PCI_UPPER_MEM		0xf3f7ffff
-#define MVME5100_PCI_LOWER_IO		0x00000000
-#define MVME5100_PCI_UPPER_IO		0x0077ffff
-
-/* MVME5100 board register addresses. */
-#define	MVME5100_BOARD_STATUS_REG	0xfef88080
-#define	MVME5100_BOARD_MODFAIL_REG	0xfef88090
-#define	MVME5100_BOARD_MODRST_REG	0xfef880a0
-#define	MVME5100_BOARD_TBEN_REG		0xfef880c0
-#define MVME5100_BOARD_SW_READ_REG	0xfef880e0
-#define	MVME5100_BOARD_GEO_ADDR_REG	0xfef880e8
-#define	MVME5100_BOARD_EXT_FEATURE1_REG	0xfef880f0
-#define	MVME5100_BOARD_EXT_FEATURE2_REG	0xfef88100
-
-/* Define the NVRAM/RTC address strobe & data registers */
-#define MVME5100_PHYS_NVRAM_AS0		0xfef880c8
-#define MVME5100_PHYS_NVRAM_AS1		0xfef880d0
-#define MVME5100_PHYS_NVRAM_DATA	0xfef880d8
-
-#define MVME5100_NVRAM_AS0	(MVME5100_PHYS_NVRAM_AS0 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_AS1	(MVME5100_PHYS_NVRAM_AS1 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_DATA	(MVME5100_PHYS_NVRAM_DATA - MVME5100_ISA_IO_BASE)
-
-/* UART clock, addresses, and irq */
-#define MVME5100_BASE_BAUD		1843200
-#define	MVME5100_SERIAL_1		0xfef88000
-#define	MVME5100_SERIAL_2		0xfef88200
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-#define MVME5100_SERIAL_IRQ		17
-#else
-#define MVME5100_SERIAL_IRQ		1
-#endif
-
-#define RS_TABLE_SIZE  4
-
-#define BASE_BAUD ( MVME5100_BASE_BAUD / 16 )
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* All UART IRQs are wire-OR'd to one MPIC IRQ */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, MVME5100_SERIAL_1, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_1,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MVME5100_SERIAL_2, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_2,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __ASM_MVME5100_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/pal4.h b/arch/ppc/platforms/pal4.h
deleted file mode 100644
index 8569c423d887..000000000000
--- a/arch/ppc/platforms/pal4.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Definitions for SBS Palomar IV board
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PLATFORMS_PAL4_H
-#define __PPC_PLATFORMS_PAL4_H
-
-#define PAL4_NVRAM             0xfffc0000
-#define PAL4_NVRAM_SIZE        0x8000
-
-#define PAL4_DRAM              0xfff80000
-#define  PAL4_DRAM_BR_MASK     0xc0
-#define  PAL4_DRAM_BR_SHIFT    6
-#define  PAL4_DRAM_RESET       0x10
-#define  PAL4_DRAM_EREADY      0x40
-
-#define PAL4_MISC              0xfff80004
-#define  PAL4_MISC_FB_MASK     0xc0
-#define  PAL4_MISC_FLASH       0x20  /* StratFlash mapping: 1->0xff80, 0->0xfff0 */
-#define  PAL4_MISC_MISC        0x08
-#define  PAL4_MISC_BITF        0x02
-#define  PAL4_MISC_NVKS        0x01
-
-#define PAL4_L2                0xfff80008
-#define  PAL4_L2_MASK          0x07
-
-#define PAL4_PLDR              0xfff8000c
-
-/* Only two Ethernet devices on the board... */
-#define PAL4_ETH               31
-#define PAL4_INTA              20
-
-#endif /* __PPC_PLATFORMS_PAL4_H */
diff --git a/arch/ppc/platforms/pal4_pci.c b/arch/ppc/platforms/pal4_pci.c
deleted file mode 100644
index d81ae1c7e1cf..000000000000
--- a/arch/ppc/platforms/pal4_pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * PCI support for SBS Palomar IV
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-/* not much to this.... */
-static inline int __init
-pal4_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	if (idsel == 9)
-		return PAL4_ETH;
-	else
-		return PAL4_INTA + (idsel - 3);
-}
-
-void __init
-pal4_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = 0;
-
-	/* Could snatch these from the CPC700.... */
-	pci_init_resource(&hose->io_resource,
-			  0x0,
-			  0x03ffffff,
-			  IORESOURCE_IO,
-			  "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  0x90000000,
-			  0x9fffffff,
-			  IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = 0x00800000;
-	hose->io_space.end = 0x03ffffff;
-	hose->mem_space.start = 0x90000000;
-	hose->mem_space.end = 0x9fffffff;
-	hose->io_base_virt = (void *) 0xf8000000;
-
-	setup_indirect_pci(hose, CPC700_PCI_CONFIG_ADDR,
-			   CPC700_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = pal4_map_irq;
-}
diff --git a/arch/ppc/platforms/pal4_serial.h b/arch/ppc/platforms/pal4_serial.h
deleted file mode 100644
index a75343224cfd..000000000000
--- a/arch/ppc/platforms/pal4_serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Definitions for SBS PalomarIV serial support
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PAL4_SERIAL_H
-#define __PPC_PAL4_SERIAL_H
-
-#define CPC700_SERIAL_1       0xff600300
-#define CPC700_SERIAL_2       0xff600400
-
-#define RS_TABLE_SIZE     2
-#define BASE_BAUD         (33333333 / 4 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define SERIAL_PORT_DFNS \
-      {0, BASE_BAUD, CPC700_SERIAL_1, 3, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_1, \
-       io_type: SERIAL_IO_MEM},   /* ttyS0 */ \
-      {0, BASE_BAUD, CPC700_SERIAL_2, 4, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_2, \
-       io_type: SERIAL_IO_MEM}
-
-#endif
diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c
deleted file mode 100644
index 3da47d9ec7a2..000000000000
--- a/arch/ppc/platforms/pal4_setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Board setup routines for the SBS PalomarIV.
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <linux/kdev_t.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-extern void pal4_find_bridges(void);
-
-unsigned int cpc700_irq_assigns[][2] = {
-        {1, 1},    /* IRQ 0: ECC correctable error */
-        {1, 1},    /* IRQ 1: PCI write to memory range */
-        {0, 1},    /* IRQ 2: PCI write to command register */
-        {0, 1},    /* IRQ 3: UART 0 */
-        {0, 1},    /* IRQ 4: UART 1 */
-        {0, 1},    /* IRQ 5: ICC 0 */
-        {0, 1},    /* IRQ 6: ICC 1 */
-        {0, 1},    /* IRQ 7: GPT compare 0 */
-        {0, 1},    /* IRQ 8: GPT compare 1 */
-        {0, 1},    /* IRQ 9: GPT compare 2 */
-        {0, 1},    /* IRQ 10: GPT compare 3 */
-        {0, 1},    /* IRQ 11: GPT compare 4 */
-        {0, 1},    /* IRQ 12: GPT capture 0 */
-        {0, 1},    /* IRQ 13: GPT capture 1 */
-        {0, 1},    /* IRQ 14: GPT capture 2 */
-        {0, 1},    /* IRQ 15: GPT capture 3 */
-        {0, 1},    /* IRQ 16: GPT capture 4 */
-        {0, 0},    /* IRQ 17: reserved */
-        {0, 0},    /* IRQ 18: reserved */
-        {0, 0},    /* IRQ 19: reserved */
-        {0, 0},    /* IRQ 20: reserved */
-        {0, 1},    /* IRQ 21: Ethernet */
-        {0, 0},    /* IRQ 22: reserved */
-        {0, 0},    /* IRQ 23: reserved */
-        {0, 0},    /* IRQ 24: resreved */
-        {0, 0},    /* IRQ 25: reserved */
-        {0, 0},    /* IRQ 26: reserved */
-        {0, 0},    /* IRQ 27: reserved */
-        {0, 0},    /* IRQ 28: reserved */
-        {0, 0},    /* IRQ 29: reserved */
-        {0, 0},    /* IRQ 30: reserved */
-        {0, 0},    /* IRQ 31: reserved */
-};
-
-static int
-pal4_show_cpuinfo(struct seq_file *m)
-{
-        seq_printf(m, "board\t\t: SBS Palomar IV\n");
-
-        return 0;
-}
-
-static void
-pal4_restart(char *cmd)
-{
-        local_irq_disable();
-        __asm__ __volatile__("lis  3,0xfff0\n \
-                              ori  3,3,0x100\n \
-                              mtspr 26,3\n \
-                              li   3,0\n \
-                              mtspr 27,3\n \
-                              rfi");
-
-        for(;;);
-}
-
-static void
-pal4_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void
-pal4_halt(void)
-{
-	pal4_power_off();
-}
-
-TODC_ALLOC();
-
-static void __init
-pal4_setup_arch(void)
-{
-	unsigned long l2;
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
-
-	pal4_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-		ROOT_DEV = Root_NFS;
-
-	/* The L2 gets disabled in the bootloader, but all the proper
-	   bits should be present from the fw, so just re-enable it */
-	l2 = _get_L2CR();
-	if (!(l2 & L2CR_L2E)) {
-		/* presume that it was initially set if the size is
-		   still present. */
-		if (l2 ^ L2CR_L2SIZ_MASK)
-			_set_L2CR(l2 | L2CR_L2E);
-		else
-			printk("L2 not set by firmware; left disabled.\n");
-	}
-}
-
-static void __init
-pal4_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
-	pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
-
-	ppc_md.setup_arch = pal4_setup_arch;
-	ppc_md.show_cpuinfo = pal4_show_cpuinfo;
-
-	ppc_md.setup_io_mappings = pal4_map_io;
-
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.restart = pal4_restart;
-	ppc_md.halt = pal4_halt;
-	ppc_md.power_off = pal4_power_off;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-}
-
diff --git a/arch/ppc/platforms/pcu_e.h b/arch/ppc/platforms/pcu_e.h
deleted file mode 100644
index a2c03a22875e..000000000000
--- a/arch/ppc/platforms/pcu_e.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens PCU E board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_PCU_E_H
-#define __MACH_PCU_E_H
-
-
-#include <asm/ppcboot.h>
-
-#define	PCU_E_IMMR_BASE    0xFE000000	/* phys. addr of IMMR			*/
-#define	PCU_E_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     PCU_E_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     PCU_E_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	15		/* = SIU_LEVEL7				*/
-#define	DEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_PCU_E_H */
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
deleted file mode 100644
index 162dc85ff7be..000000000000
--- a/arch/ppc/platforms/powerpmc250.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Board setup routines for Force PowerPMC-250 Processor PMC
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- * Borrowed heavily from prpmc750_*.c by
- * 	Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <platforms/powerpmc250.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc10x.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-extern void powerpmc250_find_bridges(void);
-extern unsigned long loops_per_jiffy;
-
-static u_char powerpmc250_openpic_initsenses[] __initdata =
-{
-    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    1,	/* PMC INTA (also MPC107 output interrupt INTA) */
-    1,	/* PMC INTB (also I82559 Ethernet controller) */
-    1,	/* PMC INTC */
-    1,	/* PMC INTD */
-    0,	/* DUART interrupt (active high) */
-};
-
-static int
-powerpmc250_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m,"machine\t\t: Force PowerPMC250\n");
-
-	return 0;
-}
-
-static void __init
-powerpmc250_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Lookup PCI host bridges */
-	powerpmc250_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk("Force PowerPMC250 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-#if 0
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-unsigned long __init powerpmc250_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-			PRPMC750_BAUDOUT_MASK;
-	} while(old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-				PRPMC750_BAUDOUT_MASK;
-		} while(old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end-tbl_start)*128;
-
-	return bus_speed;
-}
-#endif
-
-static void __init
-powerpmc250_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	//freq = powerpmc250_get_bus_speed();
-#warning hardcoded bus freq
-	freq = 100000000;
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static void
-powerpmc250_restart(char *cmd)
-{
-	local_irq_disable();
-	/* Hard reset */
-	writeb(0x11, 0xfe000332);
-	while(1);
-}
-
-static void
-powerpmc250_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-powerpmc250_power_off(void)
-{
-	powerpmc250_halt();
-}
-
-static void __init
-powerpmc250_init_IRQ(void)
-{
-
-	OpenPIC_InitSenses = powerpmc250_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses);
-	mpc10x_set_openpic();
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-powerpmc250_set_bat(void)
-{
-	unsigned long   bat3u, bat3l;
-	static int	mapping_set = 0;
-
-	if (!mapping_set)
-	{
-		__asm__ __volatile__(
-				" lis %0,0xf000\n \
-				ori %1,%0,0x002a\n \
-				ori %0,%0,0x1ffe\n \
-				mtspr 0x21e,%0\n \
-				mtspr 0x21f,%1\n \
-				isync\n \
-				sync "
-				: "=r" (bat3u), "=r" (bat3l));
-
-		mapping_set = 1;
-	}
-	return;
-}
-
-static unsigned long __init
-powerpmc250_find_end_of_memory(void)
-{
-	/* Cover I/O space with a BAT */
-	/* yuck, better hope your ram size is a power of 2  -- paulus */
-	powerpmc250_set_bat();
-
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-}
-
-static void __init
-powerpmc250_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif
-
-	/* Copy cmd_line parameters */
-	if ( r6)
-	{
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-	}
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-
-	ppc_md.setup_arch	= powerpmc250_setup_arch;
-	ppc_md.show_cpuinfo	= powerpmc250_show_cpuinfo;
-	ppc_md.init_IRQ		= powerpmc250_init_IRQ;
-	ppc_md.get_irq		= openpic_get_irq;
-
-	ppc_md.find_end_of_memory = powerpmc250_find_end_of_memory;
-	ppc_md.setup_io_mappings = powerpmc250_map_io;
-
-	ppc_md.restart		= powerpmc250_restart;
-	ppc_md.power_off	= powerpmc250_power_off;
-	ppc_md.halt		= powerpmc250_halt;
-
-	/* PowerPMC250 has no timekeeper part */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-	ppc_md.calibrate_decr	= powerpmc250_calibrate_decr;
-}
-
-
-/*
- * (This used to be arch/ppc/platforms/powerpmc250_pci.c)
- *
- * PCI support for Force PowerPMC250
- *
- */
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static inline int __init
-powerpmc250_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{17,	0,	0,	0},	/* Device 11 - 82559 */
-		{0,	0,	0,	0},	/* 12 */
-		{0,	0,	0,	0},	/* 13 */
-		{0,	0,	0,	0},	/* 14 */
-		{0,	0,	0,	0},	/* 15 */
-		{16,	17,	18,	19},	/* Device 16 - PMC A1?? */
-		};
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-powerpmc250_exclude_device(u_char bus, u_char devfn)
-{
-	/*
-	 * While doing PCI Scan  the MPC107 will 'detect' itself as
-	 * device on the PCI Bus, will create an incorrect response and
-	 * later will respond incorrectly to Configuration read coming
-	 * from another device.
-	 *
-	 * The work around is that when doing a PCI Scan one
-	 * should skip its own device number in the scan.
-	 *
-	 * The top IDsel is AD13 and the middle is AD14.
-	 *
-	 * -- Note from force
-	 */
-
-	if ((bus == 0) && (PCI_SLOT(devfn) == 13 || PCI_SLOT(devfn) == 14)) {
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	else {
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-void __init
-powerpmc250_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose){
-		printk("Can't allocate PCI 'hose' structure!!!\n");
-		return;
-	}
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		/* ppc_md.pcibios_fixup = pcore_pcibios_fixup; */
-		ppc_md.pci_swizzle = common_swizzle;
-
-		ppc_md.pci_exclude_device = powerpmc250_exclude_device;
-		ppc_md.pci_map_irq = powerpmc250_map_irq;
-	} else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-}
diff --git a/arch/ppc/platforms/powerpmc250.h b/arch/ppc/platforms/powerpmc250.h
deleted file mode 100644
index d33ad8dc0439..000000000000
--- a/arch/ppc/platforms/powerpmc250.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/ppc/platforms/powerpmc250.h
- *
- * Definitions for Force PowerPMC-250 board support
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- *
- * Borrowed heavily from prpmc750.h by Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_POWERPMC250_H
-#define __ASMPPC_POWERPMC250_H
-
-#define POWERPMC250_PCI_CONFIG_ADDR	0x80000cf8
-#define POWERPMC250_PCI_CONFIG_DATA	0x80000cfc
-
-#define POWERPMC250_PCI_PHY_MEM_BASE	0xc0000000
-#define POWERPMC250_PCI_MEM_BASE		0xf0000000
-#define POWERPMC250_PCI_IO_BASE		0x80000000
-
-#define POWERPMC250_ISA_IO_BASE		POWERPMC250_PCI_IO_BASE
-#define POWERPMC250_ISA_MEM_BASE		POWERPMC250_PCI_MEM_BASE
-#define POWERPMC250_PCI_MEM_OFFSET		POWERPMC250_PCI_PHY_MEM_BASE
-
-#define POWERPMC250_SYS_MEM_BASE		0x80000000
-
-#define POWERPMC250_HAWK_SMC_BASE		0xfef80000
-
-#define POWERPMC250_BASE_BAUD		12288000
-#define POWERPMC250_SERIAL		0xff000000
-#define POWERPMC250_SERIAL_IRQ		20
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  1
-
-#define BASE_BAUD  (POWERPMC250_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-	{ 0, BASE_BAUD, POWERPMC250_SERIAL, POWERPMC250_SERIAL_IRQ,	\
-		STD_COM_FLAGS, 				/* ttyS0 */	\
-		iomem_base: (u8 *)POWERPMC250_SERIAL,			\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM }
-
-#endif /* __ASMPPC_POWERPMC250_H */
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
deleted file mode 100644
index cbcac85c7a78..000000000000
--- a/arch/ppc/platforms/pplus.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * Board and PCI setup routines for MCG PowerPlus
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Derived from original PowerPlus PReP work by
- * Cort Dougan, Johnnie Peters, Matt Porter, and
- * Troy Benjegerdes.
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-#include <asm/vga.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-#include <asm/reg.h>
-
-#include "pplus.h"
-
-#undef DUMP_DBATS
-
-TODC_ALLOC();
-
-extern void pplus_setup_hose(void);
-extern void pplus_set_VIA_IDE_native(void);
-
-extern unsigned long loops_per_jiffy;
-unsigned char *Motherboard_map_name;
-
-/* Tables for known hardware */
-
-/* Motorola Mesquite */
-static inline int
-mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{19, 19, 19, 19},	/* IDSEL 16 - PMC Slot 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 17 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{24, 25, 26, 27},	/* IDSEL 20 - P2P bridge (to cPCI 1) */
-		{ 0,  0,  0,  0},	/* IDSEL 21 - unused */
-		{28, 29, 30, 31}	/* IDSEL 22 - P2P bridge (to cPCI 2) */
-	};
-
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola Sitka */
-static inline int
-sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{28, 25, 26, 27},	/* IDSEL 17 - PMC Slot 2 */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{20,  0,  0,  0}	/* IDSEL 20 - P2P bridge (to cPCI) */
-	};
-
-	const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX */
-static inline int
-MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet   */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{26, 27, 28, 25},	/* IDSEL 17 - PMC Slot 2 */
-		{27, 28, 25, 26}	/* IDSEL 18 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static inline int
-MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI Slot 1P */
-		{26, 27, 28, 25},	/* IDSEL 17 - PCI Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{ 0,  0,  0,  0}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	/* 2600
-	 * Raven 31
-	 * ISA   11
-	 * SCSI  12 - IRQ3
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * VGA   15 - IRQ4
-	 * PMC1  16 - IRQ9,10,11,12 = PMC1 A-D
-	 * PMC2  17 - IRQ12,9,10,11 = A-D
-	 * SCSI2 18 - IRQ11
-	 * eth2  19 - IRQ10
-	 * PCIX  20 - IRQ9,10,11,12 = PCI A-D
-	 */
-
-	/* 2400
-	 * Hawk 31
-	 * ISA  11
-	 * Univ 13
-	 * eth  14 - IRQ2
-	 * PMC1 16 - IRQ9,10,11,12 = PMC A-D
-	 * PMC2 17 - IRQ12,9,10,11 = PMC A-D
-	 * PCIX 20 - IRQ9,10,11,12 = PMC A-D
-	 */
-
-	/* 2300
-	 * Raven 31
-	 * ISA   11
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * PMC1  16 - 9,10,11,12 = A-D
-	 * PMC2  17 - 9,10,11,12 = B,C,D,A
-	 */
-
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - Universe PCI - VME */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI/PMC Slot 1P */
-		{28, 25, 26, 27},	/* IDSEL 17 - PCI/PMC Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{25, 26, 27, 28}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char pplus_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
-};
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int mot_multi = 0;
-
-struct brd_info {
-	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge
-	 * are set */
-	int cpu_type;
-	/* 0x200 if this board has a Hawk chip. */
-	int base_type;
-	/* or'ed with 0x80 if this board should be checked for multi CPU */
-	int max_cpu;
-	const char *name;
-	int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
-};
-struct brd_info mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
-	{0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
-	{0x000, 0x00, 0x00, "", NULL}
-};
-
-void __init pplus_set_board_type(void)
-{
-	unsigned char cpu_type;
-	unsigned char base_mod;
-	int entry;
-	unsigned short devid;
-	unsigned long *ProcInfo = NULL;
-
-	cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-
-	for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-		/* Check for Hawk chip */
-		if (mot_info[entry].cpu_type & 0x200) {
-			if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
-				continue;
-		} else {
-			/* store the system config register for later use. */
-			ProcInfo =
-			    (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
-
-			/* Check non hawk boards */
-			if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-				continue;
-
-			if (mot_info[entry].base_type == 0) {
-				mot_entry = entry;
-				break;
-			}
-
-			if (mot_info[entry].base_type != base_mod)
-				continue;
-		}
-
-		if (!(mot_info[entry].max_cpu & 0x80)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 not present and max processor zero indicated */
-		if ((*ProcInfo & MOT_PROC2_BIT)
-		    && !(mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 present and max processor zero indicated */
-		if (!(*ProcInfo & MOT_PROC2_BIT)
-		    && (mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* Indicate to system if this is a multiprocessor board */
-		if (!(*ProcInfo & MOT_PROC2_BIT))
-			mot_multi = 1;
-	}
-
-	if (mot_entry == -1)
-		/* No particular cpu type found - assume Mesquite (MCP750) */
-		mot_entry = 1;
-
-	Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-	ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
-}
-void __init pplus_pib_init(void)
-{
-	unsigned char reg;
-	unsigned short short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	/*
-	 * Perform specific configuration for the Via Tech or
-	 * or Winbond PCI-ISA-Bridge part.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-		/*
-		 * PPCBUG does not set the enable bits
-		 * for the IDE device. Force them on here.
-		 */
-		pci_read_config_byte(dev, 0x40, &reg);
-
-		reg |= 0x03;	/* IDE: Chip Enable Bits */
-		pci_write_config_byte(dev, 0x40, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_2,
-				   dev)) && (dev->devfn = 0x5a)) {
-		/* Force correct USB interrupt */
-		dev->irq = 11;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-		/* Clear PCI Interrupt Routing Control Register. */
-		short_reg = 0x0000;
-		pci_write_config_word(dev, 0x44, short_reg);
-		/* Route IDE interrupts to IRQ 14 */
-		reg = 0xEE;
-		pci_write_config_byte(dev, 0x43, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))) {
-		/*
-		 * Disable LEGIRQ mode so PCI INTS are routed
-		 * directly to the 8259 and enable both channels
-		 */
-		pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-		/* Force correct IDE interrupt */
-		dev->irq = 14;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-	pci_dev_put(dev);
-}
-
-void __init pplus_set_VIA_IDE_legacy(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put back original "standard" port base addresses */
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_0, 0x1f1);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_1, 0x3f5);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_2, 0x171);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_3, 0x375);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_4, 0xcc01);
-
-		/* put into legacy mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp &= ~0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void pplus_set_VIA_IDE_native(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put into native mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp |= 0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void __init pplus_pcibios_fixup(void)
-{
-
-	unsigned char reg;
-	unsigned short devid;
-	unsigned char base_mod;
-
-	printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
-			Motherboard_map_name);
-
-	/* Setup the Winbond or Via PIB */
-	pplus_pib_init();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
-	    (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-}
-
-void __init pplus_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
-
-	pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
-			  PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
-	pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
-			  PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = PPLUS_PCI_IO_START;
-	hose->io_space.end = PPLUS_PCI_IO_END;
-	hose->mem_space.start = PPLUS_PCI_MEM_START;
-	hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-				PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-			!= 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-
-	}
-
-	pplus_set_VIA_IDE_legacy();
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = pplus_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-}
-
-static int pplus_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola MCG\n");
-	seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
-
-	return 0;
-}
-
-static void __init pplus_setup_arch(void)
-{
-	struct pci_controller *hose;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	pplus_find_bridges();
-
-	hose = pci_bus_to_hose(0);
-	isa_io_base = (ulong) hose->io_base_virt;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: set_board_type", 0);
-
-	pplus_set_board_type();
-
-	/* Enable L2.  Assume we don't need to flush -- Cort */
-	*(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Motorola PowerPlus Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* remap the VGA memory */
-	vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
-						   0x08000000);
-	conswitchp = &vga_con;
-#endif
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if (cmd_line[0] == '\0') {
-		char *bootargs;
-		bootargs = prep_nvram_get_var("bootargs");
-		if (bootargs != NULL) {
-			strcpy(cmd_line, bootargs);
-			/* again.. */
-			strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: exit", 0);
-}
-
-static void pplus_restart(char *cmd)
-{
-	unsigned long i = 10000;
-
-	local_irq_disable();
-
-	/* set VIA IDE controller into native mode */
-	pplus_set_VIA_IDE_native();
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (i != 0)
-		i++;
-	panic("restart failed\n");
-}
-
-static void pplus_halt(void)
-{
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(MSR_EE, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (1) ;
-	/*
-	 * Not reached
-	 */
-}
-
-static void pplus_power_off(void)
-{
-	pplus_halt();
-}
-
-static void __init pplus_init_IRQ(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: enter", 0);
-
-	OpenPIC_InitSenses = pplus_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
-
-	if (OpenPIC_Addr != NULL) {
-
-		openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-		openpic_init(NUM_8259_INTERRUPTS);
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-					i8259_irq);
-		ppc_md.get_irq = openpic_get_irq;
-	}
-
-	i8259_init(0, 0);
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: exit", 0);
-}
-
-#ifdef CONFIG_SMP
-/* PowerPlus (MTX) support */
-static int __init smp_pplus_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init smp_pplus_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-	printk(KERN_INFO "CPU1 reset, waiting\n");
-}
-
-static void __init smp_pplus_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t pplus_smp_ops = {
-	smp_openpic_message_pass,
-	smp_pplus_probe,
-	smp_pplus_kick_cpu,
-	smp_pplus_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif				/* CONFIG_SMP */
-
-#ifdef DUMP_DBATS
-static void print_dbat(int idx, u32 bat)
-{
-
-	char str[64];
-
-	sprintf(str, "DBAT%c%c = 0x%08x\n",
-		(char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
-	ppc_md.progress(str, 0);
-}
-
-#define DUMP_DBAT(x) \
-	do { \
-	u32 __temp = mfspr(x);\
-	print_dbat(x, __temp); \
-	} while (0)
-
-static void dump_dbats(void)
-{
-	if (ppc_md.progress) {
-		DUMP_DBAT(DBAT0U);
-		DUMP_DBAT(DBAT0L);
-		DUMP_DBAT(DBAT1U);
-		DUMP_DBAT(DBAT1L);
-		DUMP_DBAT(DBAT2U);
-		DUMP_DBAT(DBAT2L);
-		DUMP_DBAT(DBAT3U);
-		DUMP_DBAT(DBAT3L);
-	}
-}
-#endif
-
-static unsigned long __init pplus_find_end_of_memory(void)
-{
-	unsigned long total;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_find_end_of_memory", 0);
-
-#ifdef DUMP_DBATS
-	dump_dbats();
-#endif
-
-	total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
-	return (total);
-}
-
-static void __init pplus_map_io(void)
-{
-	io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
-			 _PAGE_IO);
-	io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
-}
-
-static void __init pplus_init2(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x20, 0x20, "pic1");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xc0, 0x20, "dma2");
-}
-
-/*
- * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
- * to 0xf0000000 to access Falcon/Raven or Hawk registers
- */
-static __inline__ void pplus_set_bat(void)
-{
-	/* wait for all outstanding memory accesses to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-	mtspr(SPRN_DBAT3U, 0xf0001ffe);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	pplus_set_bat();
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = pplus_setup_arch;
-	ppc_md.show_cpuinfo = pplus_show_cpuinfo;
-	ppc_md.init_IRQ = pplus_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq = i8259_irq;
-	ppc_md.init = pplus_init2;
-
-	ppc_md.restart = pplus_restart;
-	ppc_md.power_off = pplus_power_off;
-	ppc_md.halt = pplus_halt;
-
-	TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-		  PREP_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-
-	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
-	ppc_md.setup_io_mappings = pplus_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SMP
-	smp_ops = &pplus_smp_ops;
-#endif				/* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h
deleted file mode 100644
index a4bbaa8d858f..000000000000
--- a/arch/ppc/platforms/pplus.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greerinclude/asm-ppc/hawk.h
- *         mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PPLUS_H
-#define __PPC_PPLUS_H
-
-#include <asm/io.h>
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PPLUS boards operate using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PPLUS_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-#define PPLUS_ISA_IO_BASE		PREP_ISA_IO_BASE
-
-/* PCI Memory space mapping info */
-#define PPLUS_PCI_MEM_SIZE		0x30000000U
-#define PPLUS_PROC_PCI_MEM_START	PPLUS_ISA_MEM_BASE
-#define PPLUS_PROC_PCI_MEM_END		(PPLUS_PROC_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-#define PPLUS_PCI_MEM_START		0x00000000U
-#define PPLUS_PCI_MEM_END		(PPLUS_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PPLUS_PCI_IO_SIZE		0x10000000U
-#define PPLUS_PROC_PCI_IO_START		PPLUS_ISA_IO_BASE
-#define PPLUS_PROC_PCI_IO_END		(PPLUS_PROC_PCI_IO_START +	\
-					 PPLUS_PCI_IO_SIZE - 1)
-#define PPLUS_PCI_IO_START		0x00000000U
-#define PPLUS_PCI_IO_END		(PPLUS_PCI_IO_START + 	\
-					 PPLUS_PCI_IO_SIZE - 1)
-/* System memory mapping info */
-#define PPLUS_PCI_DRAM_OFFSET		PREP_PCI_DRAM_OFFSET
-#define PPLUS_PCI_PHY_MEM_OFFSET	(PPLUS_ISA_MEM_BASE-PPLUS_PCI_MEM_START)
-
-/* Define base addresses for important sets of registers */
-#define PPLUS_HAWK_SMC_BASE		0xfef80000U
-#define PPLUS_HAWK_PPC_REG_BASE		0xfeff0000U
-#define PPLUS_SYS_CONFIG_REG		0xfef80400U
-#define PPLUS_L2_CONTROL_REG		0x8000081cU
-
-#define PPLUS_VGA_MEM_BASE		0xf0000000U
-
-#endif	/* __PPC_PPLUS_H */
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c
deleted file mode 100644
index 8ed433e2a5c7..000000000000
--- a/arch/ppc/platforms/prep_pci.c
+++ /dev/null
@@ -1,1339 +0,0 @@
-/*
- * PReP pci functions.
- * Originally by Gary Thomas
- * rewritten and updated by Cort Dougan (cort@cs.nmt.edu)
- *
- * The motherboard routes/maps will disappear shortly. -- Cort
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/sections.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/ptrace.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/residual.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-
-extern void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-/* Which PCI interrupt line does a given device [slot] use? */
-/* Note: This really should be two dimensional based in slot/pin used */
-static unsigned char *Motherboard_map;
-unsigned char *Motherboard_map_name;
-
-/* How is the 82378 PIRQ mapping setup? */
-static unsigned char *Motherboard_routes;
-
-static void (*Motherboard_non0)(struct pci_dev *);
-
-static void Powerplus_Map_Non0(struct pci_dev *);
-
-/* Used for Motorola to store system config register */
-static unsigned long	*ProcInfo;
-
-/* Tables for known hardware */
-
-/* Motorola PowerStackII - Utah */
-static char Utah_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        5,   /* Slot 2  - SCSI - NCR825A  */
-        0,   /* Slot 3  - unused */
-        3,   /* Slot 4  - Ethernet - DEC2114x */
-        0,   /* Slot 5  - unused */
-        2,   /* Slot 6  - PCI Card slot #1 */
-        3,   /* Slot 7  - PCI Card slot #2 */
-        5,   /* Slot 8  - PCI Card slot #3 */
-        5,   /* Slot 9  - PCI Bridge */
-             /* added here in case we ever support PCI bridges */
-             /* Secondary PCI bus cards are at slot-9,6 & slot-9,7 */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        5,   /* Slot 12 - SCSI - NCR825A */
-        0,   /* Slot 13 - unused */
-        3,   /* Slot 14 - enet */
-        0,   /* Slot 15 - unused */
-        2,   /* Slot 16 - unused */
-        3,   /* Slot 17 - unused */
-        5,   /* Slot 18 - unused */
-        0,   /* Slot 19 - unused */
-        0,   /* Slot 20 - unused */
-        0,   /* Slot 21 - unused */
-        0,   /* Slot 22 - unused */
-};
-
-static char Utah_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-	10,  /* Line 2 */
-        11,  /* Line 3 */
-        14,  /* Line 4 */
-        15,  /* Line 5 */
-};
-
-/* Motorola PowerStackII - Omaha */
-/* no integrated SCSI or ethernet */
-static char Omaha_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        3,   /* Slot 2  - Winbond EIDE */
-        0,   /* Slot 3  - unused */
-        0,   /* Slot 4  - unused */
-        0,   /* Slot 5  - unused */
-        1,   /* Slot 6  - PCI slot 1 */
-        2,   /* Slot 7  - PCI slot 2  */
-        3,   /* Slot 8  - PCI slot 3 */
-        4,   /* Slot 9  - PCI slot 4 */ /* needs indirect access */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        0,   /* Slot 12 - unused */
-        0,   /* Slot 13 - unused */
-        0,   /* Slot 14 - unused */
-        0,   /* Slot 15 - unused */
-        1,   /* Slot 16  - PCI slot 1 */
-        2,   /* Slot 17  - PCI slot 2  */
-        3,   /* Slot 18  - PCI slot 3 */
-        4,   /* Slot 19  - PCI slot 4 */ /* needs indirect access */
-        0,
-        0,
-        0,
-};
-
-static char Omaha_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-        11,  /* Line 2 */
-        14,  /* Line 3 */
-        15   /* Line 4 */
-};
-
-/* Motorola PowerStack */
-static char Blackhawk_pci_IRQ_map[19] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
- 	1,	/* Slot P7 */
- 	2,	/* Slot P6 */
- 	3,	/* Slot P5 */
-};
-
-static char Blackhawk_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	9,	/* Line 1 */
-   	11,	/* Line 2 */
-   	15,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Mesquite */
-static char Mesquite_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	0,	/* Slot 12 - unused */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	3,	/* Slot 16 - PMC */
-	0,	/* Slot 17 - unused */
-	0,	/* Slot 18 - unused */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Sitka */
-static char Sitka_pci_IRQ_map[21] =
-{
-	0,      /* Slot 0  - unused */
-	0,      /* Slot 1  - unused */
-	0,      /* Slot 2  - unused */
-	0,      /* Slot 3  - unused */
-	0,      /* Slot 4  - unused */
-	0,      /* Slot 5  - unused */
-	0,      /* Slot 6  - unused */
-	0,      /* Slot 7  - unused */
-	0,      /* Slot 8  - unused */
-	0,      /* Slot 9  - unused */
-	0,      /* Slot 10 - unused */
-	0,      /* Slot 11 - unused */
-	0,      /* Slot 12 - unused */
-	0,      /* Slot 13 - unused */
-	2,      /* Slot 14 - Ethernet */
-	0,      /* Slot 15 - unused */
-	9,      /* Slot 16 - PMC 1  */
-	12,     /* Slot 17 - PMC 2  */
-	0,      /* Slot 18 - unused */
-	0,      /* Slot 19 - unused */
-	4,      /* Slot 20 - NT P2P bridge */
-};
-
-/* Motorola MTX */
-static char MTX_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,      /* Slot 16 - PCI/PMC slot 1 */
-	10,     /* Slot 17 - PCI/PMC slot 2 */
-	11,     /* Slot 18 - PCI slot 3 */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static char MTXplus_pci_IRQ_map[23] =
-{
-        0,      /* Slot 0  - unused */
-        0,      /* Slot 1  - unused */
-        0,      /* Slot 2  - unused */
-        0,      /* Slot 3  - unused */
-        0,      /* Slot 4  - unused */
-        0,      /* Slot 5  - unused */
-        0,      /* Slot 6  - unused */
-        0,      /* Slot 7  - unused */
-        0,      /* Slot 8  - unused */
-        0,      /* Slot 9  - unused */
-        0,      /* Slot 10 - unused */
-        0,      /* Slot 11 - unused */
-        3,      /* Slot 12 - SCSI */
-        0,      /* Slot 13 - unused */
-        2,      /* Slot 14 - Ethernet 1 */
-        0,      /* Slot 15 - unused */
-        9,      /* Slot 16 - PCI slot 1P */
-        10,     /* Slot 17 - PCI slot 2P */
-        11,     /* Slot 18 - PCI slot 3P */
-        10,     /* Slot 19 - Ethernet 2 */
-        0,      /* Slot 20 - P2P Bridge */
-        0,      /* Slot 21 - unused */
-        0,      /* Slot 22 - unused */
-};
-
-static char Raven_pci_IRQ_routes[] =
-{
-   	0,	/* This is a dummy structure */
-};
-
-/* Motorola MVME16xx */
-static char Genesis_pci_IRQ_map[16] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-};
-
-static char Genesis_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-static char Genesis2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - IDE */
-	3,	/* Slot 12 - SCSI */
-	5,	/* Slot 13 - Universe PCI - VME Bridge */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,	/* Slot 16 - PMC 1 */
-	12,	/* Slot 17 - pci */
-	11,	/* Slot 18 - pci */
-	10,	/* Slot 19 - pci */
-	0,	/* Slot 20 - pci */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Series-E */
-static char Comet_pci_IRQ_map[23] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Series-EX */
-static char Comet2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	3,	/* Slot 2  - SCSI - NCR825A */
-	0,	/* Slot 3  - unused */
-	1,	/* Slot 4  - Ethernet - DEC2104X */
-	0,	/* Slot 5  - unused */
-	1,	/* Slot 6  - PCI slot 1 */
-	2,	/* Slot 7  - PCI slot 2 */
-	3,	/* Slot 8  - PCI slot 3 */
-	4,	/* Slot 9  - PCI bridge  */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI - NCR825A */
-	0,	/* Slot 13 - unused */
-	1,	/* Slot 14 - Ethernet - DEC2104X */
-	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet2_pci_IRQ_routes[] =
-{
-	0,	/* Line 0 - Unused */
-	10,	/* Line 1 */
-	11,	/* Line 2 */
-	14,	/* Line 3 */
-	15,	/* Line 4 */
-};
-
-/*
- * ibm 830 (and 850?).
- * This is actually based on the Carolina motherboard
- * -- Cort
- */
-static char ibm8xx_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral */
-        4, /* Slot 12 - Ethernet  PCIINTD# */
-        2, /* Slot 13 - PCI Slot #2 */
-        2, /* Slot 14 - S3 Video PCIINTD# */
-        0, /* Slot 15 - onboard SCSI (INDI) [1] */
-        3, /* Slot 16 - NCR58C810 RS6000 Only PCIINTC# */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm8xx_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/*
- * a 6015 ibm board
- * -- Cort
- */
-static char ibm6015_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 -  */
-        1, /* Slot 12 - SCSI */
-        2, /* Slot 13 -  */
-        2, /* Slot 14 -  */
-        1, /* Slot 15 -  */
-        1, /* Slot 16 -  */
-        0, /* Slot 17 -  */
-        2, /* Slot 18 -  */
-        0, /* Slot 19 -  */
-        0, /* Slot 20 -  */
-        0, /* Slot 21 -  */
-        2, /* Slot 22 -  */
-};
-
-static char ibm6015_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        13,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-
-/* IBM Nobis and Thinkpad 850 */
-static char Nobis_pci_IRQ_map[23] ={
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - unused */
-        3, /* Slot 12 - SCSI */
-        0, /* Slot 13 - unused */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-};
-
-static char Nobis_pci_IRQ_routes[] = {
-        0, /* Line 0 - Unused */
-        13, /* Line 1 */
-        13, /* Line 2 */
-        13, /* Line 3 */
-        13      /* Line 4 */
-};
-
-/*
- * IBM RS/6000 43p/140  -- paulus
- * XXX we should get all this from the residual data
- */
-static char ibm43p_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral ISA bridge */
-        6, /* Slot 12 - Ethernet  */
-        0, /* Slot 13 - openpic */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-        7, /* Slot 16 - NCR58C825a onboard scsi */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm43p_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/* Motorola PowerPlus architecture PCI IRQ tables */
-/* Interrupt line values for INTA-D on primary/secondary MPIC inputs */
-
-struct powerplus_irq_list
-{
-	unsigned char primary[4];       /* INT A-D */
-	unsigned char secondary[4];     /* INT A-D */
-};
-
-/*
- * For standard PowerPlus boards, bus 0 PCI INTs A-D are routed to
- * OpenPIC inputs 9-12.  PCI INTs A-D from the on board P2P bridge
- * are routed to OpenPIC inputs 5-8.  These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Powerplus_pci_IRQ_list =
-{
-	{25, 26, 27, 28},
-	{21, 22, 23, 24}
-};
-
-/*
- * For the MCP750 (system slot board), cPCI INTs A-D are routed to
- * OpenPIC inputs 8-11 and the PMC INTs A-D are routed to OpenPIC
- * input 3.  On a hot swap MCP750, the companion card PCI INTs A-D
- * are routed to OpenPIC inputs 12-15. These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Mesquite_pci_IRQ_list =
-{
-	{24, 25, 26, 27},
-	{28, 29, 30, 31}
-};
-
-/*
- * This table represents the standard PCI swizzle defined in the
- * PCI bus specification.
- */
-static unsigned char prep_pci_intpins[4][4] =
-{
-	{ 1, 2, 3, 4},  /* Buses 0, 4, 8, ... */
-	{ 2, 3, 4, 1},  /* Buses 1, 5, 9, ... */
-	{ 3, 4, 1, 2},  /* Buses 2, 6, 10 ... */
-	{ 4, 1, 2, 3},  /* Buses 3, 7, 11 ... */
-};
-
-/* We have to turn on LEVEL mode for changed IRQs */
-/* All PCI IRQs need to be level mode, so this should be something
- * other than hard-coded as well... IRQs are individually mappable
- * to either edge or level.
- */
-
-/*
- * 8259 edge/level control definitions
- */
-#define ISA8259_M_ELCR 0x4d0
-#define ISA8259_S_ELCR 0x4d1
-
-#define ELCRS_INT15_LVL         0x80
-#define ELCRS_INT14_LVL         0x40
-#define ELCRS_INT12_LVL         0x10
-#define ELCRS_INT11_LVL         0x08
-#define ELCRS_INT10_LVL         0x04
-#define ELCRS_INT9_LVL          0x02
-#define ELCRS_INT8_LVL          0x01
-#define ELCRM_INT7_LVL          0x80
-#define ELCRM_INT5_LVL          0x20
-
-#if 0
-/*
- * PCI config space access.
- */
-#define CFGADDR(dev)	((1<<(dev>>3)) | ((dev&7)<<8))
-#define DEVNO(dev)	(dev>>3)
-
-#define MIN_DEVNR	11
-#define MAX_DEVNR	22
-
-static int
-prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops prep_pci_ops =
-{
-	prep_read_config,
-	prep_write_config
-};
-#endif
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char prep_openpic_initsenses[] __initdata = {
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-    (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_FALCN_ECC_ERR */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_ETHERNET */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_GRAPHICS */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-};
-
-#define MOT_RAVEN_PRESENT	0x1
-#define MOT_HAWK_PRESENT	0x2
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int MotMPIC;
-int mot_multi;
-
-int __init
-raven_init(void)
-{
-	unsigned int	devid;
-	unsigned int	pci_membase;
-	unsigned char	base_mod;
-
-	/* Check to see if the Raven chip exists. */
-	if ( _prep_type != _PREP_Motorola) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check to see if this board is a type that might have a Raven. */
-	if ((inb(MOTOROLA_CPUTYPE_REG) & 0xF0) != 0xE0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check the first PCI device to see if it is a Raven. */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &devid);
-
-	switch (devid & 0xffff0000) {
-	case MPIC_RAVEN_ID:
-		MotMPIC = MOT_RAVEN_PRESENT;
-		break;
-	case MPIC_HAWK_ID:
-		MotMPIC = MOT_HAWK_PRESENT;
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-
-	/* Read the memory base register. */
-	early_read_config_dword(NULL, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Map the Raven MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase+0xC0000000, 0x22000);
-
-	OpenPIC_InitSenses = prep_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-	ppc_md.get_irq = openpic_get_irq;
-
-	/* If raven is present on Motorola store the system config register
-	 * for later use.
-	 */
-	ProcInfo = (unsigned long *)ioremap(0xfef80400, 4);
-
-	/* Indicate to system if this is a multiprocessor board */
-	if (!(*ProcInfo & MOT_PROC2_BIT)) {
-		mot_multi = 1;
-	}
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((MotMPIC == MOT_HAWK_PRESENT) || (base_mod == 0xF9) ||
-	    (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-
-	return 1;
-}
-
-struct mot_info {
-	int		cpu_type;	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge are set */
-					/* 0x200 if this board has a Hawk chip. */
-	int		base_type;
-	int		max_cpu;	/* ored with 0x80 if this board should be checked for multi CPU */
-	const char	*name;
-	unsigned char	*map;
-	unsigned char	*routes;
-	void            (*map_non0_bus)(struct pci_dev *);      /* For boards with more than bus 0 devices. */
-	struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */
-	unsigned char   secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */
-} mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x010, 0x00, 0x00, "Genesis",				Genesis_pci_IRQ_map,	Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x020, 0x00, 0x00, "Powerstack (Series E)",		Comet_pci_IRQ_map,	Comet_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x040, 0x00, 0x00, "Blackhawk (Powerstack)",		Blackhawk_pci_IRQ_map,	Blackhawk_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x050, 0x00, 0x00, "Omaha (PowerStack II Pro3000)",	Omaha_pci_IRQ_map,	Omaha_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x060, 0x00, 0x00, "Utah (Powerstack II Pro4000)",	Utah_pci_IRQ_map,	Utah_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x0A0, 0x00, 0x00, "Powerstack (Series EX)",		Comet2_pci_IRQ_map,	Comet2_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)",		Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)",		Sitka_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC",	Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xC0},
-	{0x1E0, 0xF6, 0x80, "MTX Plus",				MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus",			MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF9, 0x00, "MVME 2300",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFF, 0x00, "MVME 1600-001 or 1600-011",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x000, 0x00, 0x00, "",					NULL,			NULL, NULL, NULL, 0x00}
-};
-
-void __init
-ibm_prep_init(void)
-{
-	if (have_residual_data) {
-		u32 addr, real_addr, len, offset;
-		PPC_DEVICE *mpic;
-		PnP_TAG_PACKET *pkt;
-
-		/* Use the PReP residual data to determine if an OpenPIC is
-		 * present.  If so, get the large vendor packet which will
-		 * tell us the base address and length in memory.
-		 * If we are successful, ioremap the memory area and set
-		 * OpenPIC_Addr (this indicates that the OpenPIC was found).
-		 */
-		mpic = residual_find_device(-1, NULL, SystemPeripheral,
-				    ProgrammableInterruptController, MPIC, 0);
-		if (!mpic)
-			return;
-
-		pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-				mpic->AllocatedOffset, 9, 0);
-
-		if (!pkt)
-			return;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	 	if (p.PPCData[1] == 32) {
-			switch (p.PPCData[0]) {
-				case 1:  offset = PREP_ISA_IO_BASE;  break;
-				case 2:  offset = PREP_ISA_MEM_BASE; break;
-				default: return; /* Not I/O or memory?? */
-			}
-		}
-		else
-			return; /* Not a 32-bit address */
-
-		real_addr = ld_le32((unsigned int *) (p.PPCData + 4));
-		if (real_addr == 0xffffffff)
-			return;
-
-		/* Adjust address to be as seen by CPU */
-		addr = real_addr + offset;
-
-		len = ld_le32((unsigned int *) (p.PPCData + 12));
-		if (!len)
-			return;
-#undef p
-		OpenPIC_Addr = ioremap(addr, len);
-		ppc_md.get_irq = openpic_get_irq;
-
-		OpenPIC_InitSenses = prep_openpic_initsenses;
-		OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-		printk(KERN_INFO "MPIC at 0x%08x (0x%08x), length 0x%08x "
-		       "mapped to 0x%p\n", addr, real_addr, len, OpenPIC_Addr);
-	}
-}
-
-static void __init
-ibm43p_pci_map_non0(struct pci_dev *dev)
-{
-	unsigned char intpin;
-	static unsigned char bridge_intrs[4] = { 3, 4, 5, 8 };
-
-	if (dev == NULL)
-		return;
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-	if (intpin < 1 || intpin > 4)
-		return;
-	intpin = (PCI_SLOT(dev->devfn) + intpin - 1) & 3;
-	dev->irq = openpic_to_irq(bridge_intrs[intpin]);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-}
-
-void __init
-prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	if (have_residual_data) {
-		Motherboard_map_name = res->VitalProductData.PrintableModel;
-		Motherboard_map = NULL;
-		Motherboard_routes = NULL;
-		residual_irq_mask(irq_edge_mask_lo, irq_edge_mask_hi);
-	}
-}
-
-void __init
-prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)";
-	Motherboard_map = ibm6015_pci_IRQ_map;
-	Motherboard_routes = ibm6015_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM Thinkpad 850/860";
-	Motherboard_map = Nobis_pci_IRQ_map;
-	Motherboard_routes = Nobis_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)";
-	Motherboard_map = ibm8xx_pci_IRQ_map;
-	Motherboard_routes = ibm8xx_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */
-}
-
-void __init
-prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 43P-140 (Tiger1)";
-	Motherboard_map = ibm43p_pci_IRQ_map;
-	Motherboard_routes = ibm43p_pci_IRQ_routes;
-	Motherboard_non0 = ibm43p_pci_map_non0;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_route_pci_interrupts(void)
-{
-	unsigned char *ibc_pirq = (unsigned char *)0x80800860;
-	unsigned char *ibc_pcicon = (unsigned char *)0x80800840;
-	int i;
-
-	if ( _prep_type == _PREP_Motorola)
-	{
-		unsigned short irq_mode;
-		unsigned char  cpu_type;
-		unsigned char  base_mod;
-		int	       entry;
-
-		cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-		base_mod = inb(MOTOROLA_BASETYPE_REG);
-
-		for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-			if (mot_info[entry].cpu_type & 0x200) {		 	/* Check for Hawk chip */
-				if (!(MotMPIC & MOT_HAWK_PRESENT))
-					continue;
-			} else {						/* Check non hawk boards */
-				if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-					continue;
-
-				if (mot_info[entry].base_type == 0) {
-					mot_entry = entry;
-					break;
-				}
-
-				if (mot_info[entry].base_type != base_mod)
-					continue;
-			}
-
-			if (!(mot_info[entry].max_cpu & 0x80)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 not present and max processor zero indicated */
-			if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 present and max processor zero indicated */
-			if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-		}
-
-		if (mot_entry == -1) 	/* No particular cpu type found - assume Blackhawk */
-			mot_entry = 3;
-
-		Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-		Motherboard_map = mot_info[mot_entry].map;
-		Motherboard_routes = mot_info[mot_entry].routes;
-		Motherboard_non0 = mot_info[mot_entry].map_non0_bus;
-
-		if (!(mot_info[entry].cpu_type & 0x100)) {
-			/* AJF adjust level/edge control according to routes */
-			irq_mode = 0;
-			for (i = 1;  i <= 4;  i++)
-				irq_mode |= ( 1 << Motherboard_routes[i] );
-			outb( irq_mode & 0xff, 0x4d0 );
-			outb( (irq_mode >> 8) & 0xff, 0x4d1 );
-		}
-	} else if ( _prep_type == _PREP_IBM ) {
-		unsigned char irq_edge_mask_lo, irq_edge_mask_hi;
-		unsigned short irq_edge_mask;
-		int i;
-
-		setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi);
-
-		outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */
-		outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */
-
-		irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo;
-		for (i = 0; i < 16; ++i, irq_edge_mask >>= 1)
-			if (irq_edge_mask & 1)
-				irq_desc[i].status |= IRQ_LEVEL;
-	} else {
-		printk("No known machine pci routing!\n");
-		return;
-	}
-
-	/* Set up mapping from slots */
-	if (Motherboard_routes) {
-		for (i = 1;  i <= 4;  i++)
-			ibc_pirq[i-1] = Motherboard_routes[i];
-
-		/* Enable PCI interrupts */
-		*ibc_pcicon |= 0x20;
-	}
-}
-
-void __init
-prep_pib_init(void)
-{
-	unsigned char   reg;
-	unsigned short  short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	if (( _prep_type == _PREP_Motorola) && (OpenPIC_Addr)) {
-		/*
-		 * Perform specific configuration for the Via Tech or
-		 * or Winbond PCI-ISA-Bridge part.
-		 */
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-					PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-			/*
-			 * PPCBUG does not set the enable bits
-			 * for the IDE device. Force them on here.
-			 */
-			pci_read_config_byte(dev, 0x40, &reg);
-
-			reg |= 0x03; /* IDE: Chip Enable Bits */
-			pci_write_config_byte(dev, 0x40, reg);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-						PCI_DEVICE_ID_VIA_82C586_2,
-						dev)) && (dev->devfn = 0x5a)) {
-			/* Force correct USB interrupt */
-			dev->irq = 11;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-					PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-			 /* Clear PCI Interrupt Routing Control Register. */
-			short_reg = 0x0000;
-			pci_write_config_word(dev, 0x44, short_reg);
-			if (OpenPIC_Addr){
-				/* Route IDE interrupts to IRQ 14 */
-				reg = 0xEE;
-				pci_write_config_byte(dev, 0x43, reg);
-			}
-		}
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))){
-		if (OpenPIC_Addr){
-			/*
-			 * Disable LEGIRQ mode so PCI INTS are routed
-			 * directly to the 8259 and enable both channels
-			 */
-			pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-			/* Force correct IDE interrupt */
-			dev->irq = 14;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		} else {
-			/* Enable LEGIRQ for PCI INT -> 8259 IRQ routing */
-			pci_write_config_dword(dev, 0x40, 0x10ff08a1);
-		}
-	}
-	pci_dev_put(dev);
-}
-
-static void __init
-Powerplus_Map_Non0(struct pci_dev *dev)
-{
-	struct pci_bus  *pbus;          /* Parent bus structure pointer */
-	struct pci_dev  *tdev = dev;    /* Temporary device structure */
-	unsigned int    devnum;         /* Accumulated device number */
-	unsigned char   intline;        /* Linux interrupt value */
-	unsigned char   intpin;         /* PCI interrupt pin */
-
-	/* Check for valid PCI dev pointer */
-	if (dev == NULL) return;
-
-	/* Initialize bridge IDSEL variable */
-	devnum = PCI_SLOT(tdev->devfn);
-
-	/* Read the interrupt pin of the device and adjust for indexing */
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-
-	/* If device doesn't request an interrupt, return */
-	if ( (intpin < 1) || (intpin > 4) )
-		return;
-
-	intpin--;
-
-	/*
-	 * Walk up to bus 0, adjusting the interrupt pin for the standard
-	 * PCI bus swizzle.
-	 */
-	do {
-		intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-		pbus = tdev->bus;        /* up one level */
-		tdev = pbus->self;
-		devnum = PCI_SLOT(tdev->devfn);
-	} while(tdev->bus->number);
-
-	/* Use the primary interrupt inputs by default */
-	intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-
-	/*
-	 * If the board has secondary interrupt inputs, walk the bus and
-	 * note the devfn of the bridge from bus 0.  If it is the same as
-	 * the devfn of the bus bridge with secondary inputs, use those.
-	 * Otherwise, assume it's a PMC site and get the interrupt line
-	 * value from the interrupt routing table.
-	 */
-	if (mot_info[mot_entry].secondary_bridge_devfn) {
-		pbus = dev->bus;
-
-		while (pbus->primary != 0)
-			pbus = pbus->parent;
-
-		if ((pbus->self)->devfn != 0xA0) {
-			if ((pbus->self)->devfn == mot_info[mot_entry].secondary_bridge_devfn)
-				intline = mot_info[mot_entry].pci_irq_list->secondary[intpin];
-			else {
-				if ((char *)(mot_info[mot_entry].map) == (char *)Mesquite_pci_IRQ_map)
-					intline = mot_info[mot_entry].map[((pbus->self)->devfn)/8] + 16;
-				else {
-					int i;
-					for (i=0;i<3;i++)
-						intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-					intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-				}
-			}
-		}
-	}
-
-	/* Write calculated interrupt value to header and device list */
-	dev->irq = intline;
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, (u8)dev->irq);
-}
-
-void __init
-prep_pcibios_fixup(void)
-{
-        struct pci_dev *dev = NULL;
-	int irq;
-	int have_openpic = (OpenPIC_Addr != NULL);
-
-	prep_route_pci_interrupts();
-
-	printk("Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name);
-
-	/* Iterate through all the PCI devices, setting the IRQ */
-	for_each_pci_dev(dev) {
-		/*
-		 * If we have residual data, then this is easy: query the
-		 * residual data for the IRQ line allocated to the device.
-		 * This works the same whether we have an OpenPic or not.
-		 */
-		if (have_residual_data) {
-			irq = residual_pcidev_irq(dev);
-			dev->irq = have_openpic ? openpic_to_irq(irq) : irq;
-		}
-		/*
-		 * If we don't have residual data, then we need to use
-		 * tables to determine the IRQ.  The table organisation
-		 * is different depending on whether there is an OpenPIC
-		 * or not.  The tables are only used for bus 0, so check
-		 * this first.
-		 */
-		else if (dev->bus->number == 0) {
-			irq = Motherboard_map[PCI_SLOT(dev->devfn)];
-			dev->irq = have_openpic ? openpic_to_irq(irq)
-						: Motherboard_routes[irq];
-		}
-		/*
-		 * Finally, if we don't have residual data and the bus is
-		 * non-zero, use the callback (if provided)
-		 */
-		else {
-			if (Motherboard_non0 != NULL)
-				Motherboard_non0(dev);
-
-			continue;
-		}
-
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	/* Setup the Winbond or Via PIB - prep_pib_init() is coded for
-	 * the non-openpic case, but it breaks (at least) the Utah
-	 * (Powerstack II Pro4000), so only call it if we have an
-	 * openpic.
-	 */
-	if (have_openpic)
-		prep_pib_init();
-}
-
-static void __init
-prep_pcibios_after_init(void)
-{
-#if 0
-	struct pci_dev *dev;
-
-	/* If there is a WD 90C, reset the IO BAR to 0x0 (it started that
-	 * way, but the PCI layer relocated it because it thought 0x0 was
-	 * invalid for a BAR).
-	 * If you don't do this, the card's VGA base will be <IO BAR>+0xc0000
-	 * instead of 0xc0000. vgacon.c (for example) is completely unaware of
-	 * this little quirk.
-	 */
-	dev = pci_get_device(PCI_VENDOR_ID_WD, PCI_DEVICE_ID_WD_90C, NULL);
-	if (dev) {
-		dev->resource[1].end -= dev->resource[1].start;
-		dev->resource[1].start = 0;
-		/* tell the hardware */
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0x0);
-		pci_dev_put(dev);
-	}
-#endif
-}
-
-static void __init
-prep_init_resource(struct resource *res, unsigned long start,
-		   unsigned long end, int flags)
-{
-	res->flags = flags;
-	res->start = start;
-	res->end = end;
-	res->name = "PCI host bridge";
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __init
-prep_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_phys = PREP_ISA_IO_BASE;
-	hose->io_base_virt = ioremap(PREP_ISA_IO_BASE, 0x800000);
-	prep_init_resource(&hose->io_resource, 0, 0x007fffff, IORESOURCE_IO);
-	prep_init_resource(&hose->mem_resources[0], 0xc0000000, 0xfeffffff,
-			   IORESOURCE_MEM);
-	setup_indirect_pci(hose, PREP_ISA_IO_BASE + 0xcf8,
-			   PREP_ISA_IO_BASE + 0xcfc);
-
-	printk("PReP architecture\n");
-
-	if (have_residual_data) {
-		PPC_DEVICE *hostbridge;
-
-		hostbridge = residual_find_device(PROCESSORDEVICE, NULL,
-			BridgeController, PCIBridge, -1, 0);
-		if (hostbridge &&
-			((hostbridge->DeviceId.Interface == PCIBridgeIndirect) ||
-			 (hostbridge->DeviceId.Interface == PCIBridgeRS6K))) {
-			PnP_TAG_PACKET * pkt;
-			pkt = PnP_find_large_vendor_packet(
-				res->DevicePnPHeap+hostbridge->AllocatedOffset,
-				3, 0);
-			if(pkt) {
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-				setup_indirect_pci(hose,
-					ld_le32((unsigned *) (p.PPCData)),
-					ld_le32((unsigned *) (p.PPCData+8)));
-#undef p
-			} else
-				setup_indirect_pci(hose, 0x80000cf8, 0x80000cfc);
-		}
-	}
-
-	ppc_md.pcibios_fixup = prep_pcibios_fixup;
-	ppc_md.pcibios_after_init = prep_pcibios_after_init;
-}
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
deleted file mode 100644
index 465b658c927d..000000000000
--- a/arch/ppc/platforms/prep_setup.c
+++ /dev/null
@@ -1,1043 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *
- * Support for PReP (Motorola MTX/MVME)
- * by Troy Benjegerdes (hozer@drgw.net)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/timex.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cache.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/mc146818rtc.h>
-#include <asm/mk48t59.h>
-#include <asm/prep_nvram.h>
-#include <asm/raven.h>
-#include <asm/vga.h>
-#include <asm/time.h>
-#include <asm/mpc10x.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/todc.h>
-
-/* prep registers for L2 */
-#define CACHECRBA       0x80000823      /* Cache configuration register address */
-#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
-#define L2CACHE_512KB	0x00	/* 512KB */
-#define L2CACHE_256KB	0x01	/* 256KB */
-#define L2CACHE_1MB	0x02	/* 1MB */
-#define L2CACHE_NONE	0x03	/* NONE */
-#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
-
-TODC_ALLOC();
-
-extern unsigned char prep_nvram_read_val(int addr);
-extern void prep_nvram_write_val(int addr,
-				 unsigned char val);
-extern unsigned char rs_nvram_read_val(int addr);
-extern void rs_nvram_write_val(int addr,
-				 unsigned char val);
-extern void ibm_prep_init(void);
-
-extern void prep_find_bridges(void);
-
-int _prep_type;
-
-extern void prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-
-
-#define cached_21	(((char *)(ppc_cached_irq_mask))[3])
-#define cached_A1	(((char *)(ppc_cached_irq_mask))[2])
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-
-/* useful ISA ports */
-#define PREP_SYSCTL	0x81c
-/* present in the IBM reference design; possibly identical in Mot boxes: */
-#define PREP_IBM_SIMM_ID	0x803	/* SIMM size: 32 or 8 MiB */
-#define PREP_IBM_SIMM_PRESENCE	0x804
-#define PREP_IBM_EQUIPMENT	0x80c
-#define PREP_IBM_L2INFO	0x80d
-#define PREP_IBM_PM1	0x82a	/* power management register 1 */
-#define PREP_IBM_PLANAR	0x852	/* planar ID - identifies the motherboard */
-#define PREP_IBM_DISP	0x8c0	/* 4-digit LED display */
-
-/* Equipment Present Register masks: */
-#define PREP_IBM_EQUIPMENT_RESERVED	0x80
-#define PREP_IBM_EQUIPMENT_SCSIFUSE	0x40
-#define PREP_IBM_EQUIPMENT_L2_COPYBACK	0x08
-#define PREP_IBM_EQUIPMENT_L2_256	0x04
-#define PREP_IBM_EQUIPMENT_CPU	0x02
-#define PREP_IBM_EQUIPMENT_L2	0x01
-
-/* planar ID values: */
-/* Sandalfoot/Sandalbow (6015/7020) */
-#define PREP_IBM_SANDALFOOT	0xfc
-/* Woodfield, Thinkpad 850/860 (6042/7249) */
-#define PREP_IBM_THINKPAD	0xff /* planar ID unimplemented */
-/* PowerSeries 830/850 (6050/6070) */
-#define PREP_IBM_CAROLINA_IDE_0	0xf0
-#define PREP_IBM_CAROLINA_IDE_1	0xf1
-#define PREP_IBM_CAROLINA_IDE_2	0xf2
-#define PREP_IBM_CAROLINA_IDE_3	0xf3
-/* 7248-43P */
-#define PREP_IBM_CAROLINA_SCSI_0	0xf4
-#define PREP_IBM_CAROLINA_SCSI_1	0xf5
-#define PREP_IBM_CAROLINA_SCSI_2	0xf6
-#define PREP_IBM_CAROLINA_SCSI_3	0xf7 /* missing from Carolina Tech Spec */
-/* Tiger1 (7043-140) */
-#define PREP_IBM_TIGER1_133		0xd1
-#define PREP_IBM_TIGER1_166		0xd2
-#define PREP_IBM_TIGER1_180		0xd3
-#define PREP_IBM_TIGER1_xxx		0xd4 /* unknown, but probably exists */
-#define PREP_IBM_TIGER1_333		0xd5 /* missing from Tiger Tech Spec */
-
-/* setup_ibm_pci:
- * 	set Motherboard_map_name, Motherboard_map, Motherboard_routes.
- * 	return 8259 edge/level masks.
- */
-void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-extern char *Motherboard_map_name; /* for use in *_cpuinfo */
-
-/*
- * As found in the PReP reference implementation.
- * Used by Thinkpad, Sandalfoot (6015/7020), and all Motorola PReP.
- */
-static void __init
-prep_gen_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0x3, PREP_SYSCTL);
-}
-
-/* Used by Carolina and Tiger1 */
-static void __init
-prep_carolina_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0xc0, PREP_SYSCTL);
-}
-
-/* cpuinfo code common to all IBM PReP */
-static void
-prep_ibm_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	seq_printf(m, "upgrade cpu\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_CPU) {
-		seq_printf(m, "not ");
-	}
-	seq_printf(m, "present\n");
-
-	/* print info about the SCSI fuse */
-	seq_printf(m, "scsi fuse\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_SCSIFUSE)
-		seq_printf(m, "ok");
-	else
-		seq_printf(m, "bad");
-	seq_printf(m, "\n");
-
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldMiB ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-}
-
-static int
-prep_gen_cpuinfo(struct seq_file *m)
-{
-	prep_ibm_cpuinfo(m);
-	return 0;
-}
-
-static int
-prep_sandalfoot_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "L2 cache\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_L2) {
-		seq_printf(m, "not present");
-	} else {
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_256)
-			seq_printf(m, "256KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_COPYBACK)
-			seq_printf(m, ", copy-back");
-		else
-			seq_printf(m, ", write-through");
-	}
-	seq_printf(m, "\n");
-
-	return 0;
-}
-
-static int
-prep_thinkpad_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-	char *cpubus_speed, *pci_speed;
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		switch ((equip_reg & 0xc) >> 2) {
-			case 0x0:
-				seq_printf(m, "128KiB look-aside 2-way write-through\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB look-aside direct-mapped write-back\n");
-				break;
-			case 0x2:
-				seq_printf(m, "256KiB look-aside 2-way write-through\n");
-				break;
-			case 0x3:
-				seq_printf(m, "256KiB look-aside direct-mapped write-back\n");
-				break;
-		}
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	/* report bus speeds because we can */
-	if ((equip_reg & 0x80) == 0) {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "50";
-				pci_speed = "25";
-				break;
-			case 0x3:
-				cpubus_speed = "66";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	} else {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "25";
-				pci_speed = "25";
-				break;
-			case 0x2:
-				cpubus_speed = "60";
-				pci_speed = "30";
-				break;
-			case 0x3:
-				cpubus_speed = "33";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	}
-	seq_printf(m, "60x bus\t\t: %sMHz\n", cpubus_speed);
-	seq_printf(m, "pci bus\t\t: %sMHz\n", pci_speed);
-
-	return 0;
-}
-
-static int
-prep_carolina_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-		/* L2 size */
-		if ((l2_reg & 0x60) == 0)
-			seq_printf(m, "256KiB");
-		else if ((l2_reg & 0x60) == 0x20)
-			seq_printf(m, "512KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		/* L2 type */
-		if ((l2_reg & 0x3) == 0)
-			seq_printf(m, ", async");
-		else if ((l2_reg & 0x3) == 1)
-			seq_printf(m, ", sync");
-		else
-			seq_printf(m, ", unknown type");
-
-		seq_printf(m, "\n");
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	return 0;
-}
-
-static int
-prep_tiger1_cpuinfo(struct seq_file *m)
-{
-	unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((l2_reg & 0xf) == 0xf) {
-		seq_printf(m, "not present\n");
-	} else {
-		if (l2_reg & 0x8)
-			seq_printf(m, "async, ");
-		else
-			seq_printf(m, "sync burst, ");
-	
-		if (l2_reg & 0x4)
-			seq_printf(m, "parity, ");
-		else
-			seq_printf(m, "no parity, ");
-	
-		switch (l2_reg & 0x3) {
-			case 0x0:
-				seq_printf(m, "256KiB\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB\n");
-				break;
-			case 0x2:
-				seq_printf(m, "1MiB\n");
-				break;
-			default:
-				seq_printf(m, "unknown size\n");
-				break;
-		}
-	}
-
-	return 0;
-}
-
-
-/* Used by all Motorola PReP */
-static int
-prep_mot_cpuinfo(struct seq_file *m)
-{
-	unsigned int cachew = *((unsigned char *)CACHECRBA);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	switch (cachew & L2CACHE_MASK) {
-		case L2CACHE_512KB:
-			seq_printf(m, "512KiB");
-			break;
-		case L2CACHE_256KB:
-			seq_printf(m, "256KiB");
-			break;
-		case L2CACHE_1MB:
-			seq_printf(m, "1MiB");
-			break;
-		case L2CACHE_NONE:
-			seq_printf(m, "none\n");
-			goto no_l2;
-			break;
-		default:
-			seq_printf(m, "%x\n", cachew);
-	}
-
-	seq_printf(m, ", parity %s",
-			(cachew & L2CACHE_PARITY)? "enabled" : "disabled");
-
-	seq_printf(m, " SRAM:");
-
-	switch ( ((cachew & 0xf0) >> 4) & ~(0x3) ) {
-		case 1: seq_printf(m, "synchronous, parity, flow-through\n");
-				break;
-		case 2: seq_printf(m, "asynchronous, no parity\n");
-				break;
-		case 3: seq_printf(m, "asynchronous, parity\n");
-				break;
-		default:seq_printf(m, "synchronous, pipelined, no parity\n");
-				break;
-	}
-
-no_l2:
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldM ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-
-	return 0;
-}
-
-static void
-prep_restart(char *cmd)
-{
-#define PREP_SP92	0x92	/* Special Port 92 */
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb( inb(PREP_SP92) & ~1L , PREP_SP92);
-	/* signal a reset to system control port A - soft reset */
-	outb( inb(PREP_SP92) | 1 , PREP_SP92);
-
-	while ( 1 ) ;
-	/* not reached */
-#undef PREP_SP92
-}
-
-static void
-prep_halt(void)
-{
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	while ( 1 ) ;
-	/* not reached */
-}
-
-/* Carrera is the power manager in the Thinkpads. Unfortunately not much is
- * known about it, so we can't power down.
- */
-static void
-prep_carrera_poweroff(void)
-{
-	prep_halt();
-}
-
-/*
- * On most IBM PReP's, power management is handled by a Signetics 87c750
- * behind the Utah component on the ISA bus. To access the 750 you must write
- * a series of nibbles to port 0x82a (decoded by the Utah). This is described
- * somewhat in the IBM Carolina Technical Specification.
- * -Hollis
- */
-static void
-utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value)
-{
-	/*
-	 * byte1: 0 0 0 1 0  d  a5 a4
-	 * byte2: 0 0 0 1 a3 a2 a1 a0
-	 *
-	 * d = the bit's value, enabled or disabled
-	 * (a5 a4 a3) = the byte number, minus 20
-	 * (a2 a1 a0) = the bit number
-	 *
-	 * example: set the 5th bit of byte 21 (21.5)
-	 *     a5 a4 a3 = 001 (byte 1)
-	 *     a2 a1 a0 = 101 (bit 5)
-	 *
-	 *     byte1 = 0001 0100 (0x14)
-	 *     byte2 = 0001 1101 (0x1d)
-	 */
-	unsigned char byte1=0x10, byte2=0x10;
-
-	/* the 750's '20.0' is accessed as '0.0' through Utah (which adds 20) */
-	bytenum -= 20;
-
-	byte1 |= (!!value) << 2;		/* set d */
-	byte1 |= (bytenum >> 1) & 0x3;	/* set a5, a4 */
-
-	byte2 |= (bytenum & 0x1) << 3;	/* set a3 */
-	byte2 |= bitnum & 0x7;			/* set a2, a1, a0 */
-
-	outb(byte1, PREP_IBM_PM1);	/* first nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-
-	outb(byte2, PREP_IBM_PM1);	/* second nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-}
-
-static void
-prep_sig750_poweroff(void)
-{
-	/* tweak the power manager found in most IBM PRePs (except Thinkpads) */
-
-	local_irq_disable();
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	utah_sig87c750_setbit(21, 5, 1); /* set bit 21.5, "PMEXEC_OFF" */
-
-	while (1) ;
-	/* not reached */
-}
-
-static int
-prep_show_percpuinfo(struct seq_file *m, int i)
-{
-	/* PREP's without residual data will give incorrect values here */
-	seq_printf(m, "clock\t\t: ");
-	if (have_residual_data)
-		seq_printf(m, "%ldMHz\n",
-			   (res->VitalProductData.ProcessorHz > 1024) ?
-			   res->VitalProductData.ProcessorHz / 1000000 :
-			   res->VitalProductData.ProcessorHz);
-	else
-		seq_printf(m, "???\n");
-
-	return 0;
-}
-
-/*
- * Fill out screen_info according to the residual data. This allows us to use
- * at least vesafb.
- */
-static void __init
-prep_init_vesa(void)
-{
-#if     (defined(CONFIG_FB_VGA16) || defined(CONFIG_FB_VGA16_MODULE) || \
-	 defined(CONFIG_FB_VESA))
-	PPC_DEVICE *vgadev = NULL;
-
-	if (have_residual_data)
-		vgadev = residual_find_device(~0, NULL, DisplayController,
-							SVGAController, -1, 0);
-
-	if (vgadev != NULL) {
-		PnP_TAG_PACKET *pkt;
-
-		pkt = PnP_find_large_vendor_packet(
-				(unsigned char *)&res->DevicePnPHeap[vgadev->AllocatedOffset],
-				0x04, 0); /* 0x04 = Display Tag */
-		if (pkt != NULL) {
-			unsigned char *ptr = (unsigned char *)pkt;
-
-			if (ptr[4]) {
-				/* graphics mode */
-				screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
-
-				screen_info.lfb_depth = ptr[4] * 8;
-
-				screen_info.lfb_width = swab16(*(short *)(ptr+6));
-				screen_info.lfb_height = swab16(*(short *)(ptr+8));
-				screen_info.lfb_linelength = swab16(*(short *)(ptr+10));
-
-				screen_info.lfb_base = swab32(*(long *)(ptr+12));
-				screen_info.lfb_size = swab32(*(long *)(ptr+20)) / 65536;
-			}
-		}
-	}
-#endif
-}
-
-/*
- * Set DBAT 2 to access 0x80000000 so early progress messages will work
- */
-static __inline__ void
-prep_set_bat(void)
-{
-	/* wait for all outstanding memory access to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-/*
- * IBM 3-digit status LED
- */
-static unsigned int ibm_statusled_base;
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex);
-
-static int
-ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2,
-		    void * dummy3)
-{
-	ibm_statusled_progress(NULL, 0x505); /* SOS */
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ibm_statusled_block = {
-	ibm_statusled_panic,
-	NULL,
-	INT_MAX /* try to do it first */
-};
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex)
-{
-	static int notifier_installed;
-	/*
-	 * Progress uses 4 digits and we have only 3.  So, we map 0xffff to
-	 * 0xfff for display switch off.  Out of range values are mapped to
-	 * 0xeff, as I'm told 0xf00 and above are reserved for hardware codes.
-	 * Install the panic notifier when the display is first switched off.
-	 */
-	if (hex == 0xffff) {
-		hex = 0xfff;
-		if (!notifier_installed) {
-			++notifier_installed;
-			atomic_notifier_chain_register(&panic_notifier_list,
-						&ibm_statusled_block);
-		}
-	}
-	else
-		if (hex > 0xfff)
-			hex = 0xeff;
-
-	mb();
-	outw(hex, ibm_statusled_base);
-}
-
-static void __init
-ibm_statusled_init(void)
-{
-	/*
-	 * The IBM 3-digit LED display is specified in the residual data
-	 * as an operator panel device, type "System Status LED".  Find
-	 * that device and determine its address.  We validate all the
-	 * other parameters on the off-chance another, similar device
-	 * exists.
-	 */
-	if (have_residual_data) {
-		PPC_DEVICE *led;
-		PnP_TAG_PACKET *pkt;
-
-		led = residual_find_device(~0, NULL, SystemPeripheral,
-					   OperatorPanel, SystemStatusLED, 0);
-		if (!led)
-			return;
-
-		pkt = PnP_find_packet((unsigned char *)
-		       &res->DevicePnPHeap[led->AllocatedOffset], S8_Packet, 0);
-		if (!pkt)
-			return;
-
-		if (pkt->S8_Pack.IOInfo != ISAAddr16bit)
-			return;
-		if (*(unsigned short *)pkt->S8_Pack.RangeMin !=
-		    *(unsigned short *)pkt->S8_Pack.RangeMax)
-			return;
-		if (pkt->S8_Pack.IOAlign != 2)
-			return;
-		if (pkt->S8_Pack.IONum != 2)
-			return;
-
-		ibm_statusled_base = ld_le16((unsigned short *)
-					     (pkt->S8_Pack.RangeMin));
-		ppc_md.progress = ibm_statusled_progress;
-	}
-}
-
-static void __init
-prep_setup_arch(void)
-{
-	unsigned char reg;
-	int is_ide=0;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	/* Lookup PCI host bridges */
-	prep_find_bridges();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	switch ( _prep_type )
-	{
-	case _PREP_IBM:
-		reg = inb(PREP_IBM_PLANAR);
-		printk(KERN_INFO "IBM planar ID: %02x", reg);
-		switch (reg) {
-			case PREP_IBM_SANDALFOOT:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_sandalfoot_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_sandalfoot_cpuinfo;
-				break;
-			case PREP_IBM_THINKPAD:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_thinkpad_setup_pci;
-				ppc_md.power_off = prep_carrera_poweroff;
-				ppc_md.show_cpuinfo = prep_thinkpad_cpuinfo;
-				break;
-			default:
-				if (have_residual_data) {
-					prep_gen_enable_l2();
-					setup_ibm_pci = prep_residual_setup_pci;
-					ppc_md.power_off = prep_halt;
-					ppc_md.show_cpuinfo = prep_gen_cpuinfo;
-					break;
-				}
-				else
-					printk(" - unknown! Assuming Carolina");
-					/* fall through */
-			case PREP_IBM_CAROLINA_IDE_0:
-			case PREP_IBM_CAROLINA_IDE_1:
-			case PREP_IBM_CAROLINA_IDE_2:
-			case PREP_IBM_CAROLINA_IDE_3:
-				is_ide = 1;
-			case PREP_IBM_CAROLINA_SCSI_0:
-			case PREP_IBM_CAROLINA_SCSI_1:
-			case PREP_IBM_CAROLINA_SCSI_2:
-			case PREP_IBM_CAROLINA_SCSI_3:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_carolina_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_carolina_cpuinfo;
-				break;
-			case PREP_IBM_TIGER1_133:
-			case PREP_IBM_TIGER1_166:
-			case PREP_IBM_TIGER1_180:
-			case PREP_IBM_TIGER1_xxx:
-			case PREP_IBM_TIGER1_333:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_tiger1_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_tiger1_cpuinfo;
-				break;
-		}
-		printk("\n");
-
-		/* default root device */
-		if (is_ide)
-			ROOT_DEV = MKDEV(IDE0_MAJOR, 3);
-		else
-			ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 3);
-
-		break;
-	case _PREP_Motorola:
-		prep_gen_enable_l2();
-		ppc_md.power_off = prep_halt;
-		ppc_md.show_cpuinfo = prep_mot_cpuinfo;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		if (initrd_start)
-			ROOT_DEV = Root_RAM0;
-		else
-#endif
-#ifdef CONFIG_ROOT_NFS
-			ROOT_DEV = Root_NFS;
-#else
-			ROOT_DEV = Root_SDA2;
-#endif
-		break;
-	}
-
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-
-	prep_init_vesa();
-
-	switch (_prep_type) {
-	case _PREP_Motorola:
-		raven_init();
-		break;
-	case _PREP_IBM:
-		ibm_prep_init();
-		break;
-	}
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* vgacon.c needs to know where we mapped IO memory in io_block_mapping() */
-	vgacon_remap_base = 0xf0000000;
-	conswitchp = &vga_con;
-#endif
-}
-
-/*
- * First, see if we can get this information from the residual data.
- * This is important on some IBM PReP systems.  If we cannot, we let the
- * TODC code handle doing this.
- */
-static void __init
-prep_calibrate_decr(void)
-{
-	if (have_residual_data) {
-		unsigned long freq, divisor = 4;
-
-		if ( res->VitalProductData.ProcessorBusHz ) {
-			freq = res->VitalProductData.ProcessorBusHz;
-			printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-					(freq/divisor)/1000000,
-					(freq/divisor)%1000000);
-			tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-			tb_ticks_per_jiffy = freq / HZ / divisor;
-		}
-	}
-	else
-		todc_calibrate_decr();
-}
-
-static void __init
-prep_init_IRQ(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	if (OpenPIC_Addr != NULL) {
-		openpic_init(NUM_8259_INTERRUPTS);
-		/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-				       i8259_irq);
-	}
-
-	if (have_residual_data) {
-		i8259_init(residual_isapic_addr(), 0);
-		return;
-	}
-
-	/* If we have a Raven PCI bridge or a Hawk PCI bridge / Memory
-	 * controller, we poll (as they have a different int-ack address). */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK)))
-		i8259_init(0, 0);
-	else
-		/* PCI interrupt ack address given in section 6.1.8 of the
-		 * PReP specification. */
-		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
-}
-
-#ifdef CONFIG_SMP
-/* PReP (MTX) support */
-static int __init
-smp_prep_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init
-smp_prep_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
-	printk("CPU1 released, waiting\n");
-}
-
-static void __init
-smp_prep_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t prep_smp_ops = {
-	smp_openpic_message_pass,
-	smp_prep_probe,
-	smp_prep_kick_cpu,
-	smp_prep_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-/*
- * Setup the bat mappings we're going to load that cover
- * the io areas.  RAM was mapped by mapin_ram().
- * -- Cort
- */
-static void __init
-prep_map_io(void)
-{
-	io_block_mapping(0x80000000, PREP_ISA_IO_BASE, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, PREP_ISA_MEM_BASE, 0x08000000, _PAGE_IO);
-}
-
-static int __init
-prep_request_io(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x00,0x20,"dma1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-device_initcall(prep_request_io);
-
-void __init
-prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_PREP_RESIDUAL
-	/* make a copy of residual data */
-	if ( r3 ) {
-		memcpy((void *)res,(void *)(r3+KERNELBASE),
-			 sizeof(RESIDUAL));
-	}
-#endif
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	/* figure out what kind of prep workstation we are */
-	if (have_residual_data) {
-		if ( !strncmp(res->VitalProductData.PrintableModel,"IBM",3) )
-			_prep_type = _PREP_IBM;
-		else
-			_prep_type = _PREP_Motorola;
-	}
-	else {
-		/* assume motorola if no residual (netboot?) */
-		_prep_type = _PREP_Motorola;
-	}
-
-#ifdef CONFIG_PREP_RESIDUAL
-	/* Switch off all residual data processing if the user requests it */
-	if (strstr(cmd_line, "noresidual") != NULL)
-			res = NULL;
-#endif
-
-	/* Initialise progress early to get maximum benefit */
-	prep_set_bat();
-	ibm_statusled_init();
-
-	ppc_md.setup_arch     = prep_setup_arch;
-	ppc_md.show_percpuinfo = prep_show_percpuinfo;
-	ppc_md.show_cpuinfo   = NULL; /* set in prep_setup_arch() */
-	ppc_md.init_IRQ       = prep_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq        = i8259_irq;
-
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = prep_restart;
-	ppc_md.power_off      = NULL; /* set in prep_setup_arch() */
-	ppc_md.halt           = prep_halt;
-
-	ppc_md.nvram_read_val = prep_nvram_read_val;
-	ppc_md.nvram_write_val = prep_nvram_write_val;
-
-	ppc_md.time_init      = todc_time_init;
-	if (_prep_type == _PREP_IBM) {
-		ppc_md.rtc_read_val = todc_mc146818_read_val;
-		ppc_md.rtc_write_val = todc_mc146818_write_val;
-		TODC_INIT(TODC_TYPE_MC146818, RTC_PORT(0), NULL, RTC_PORT(1),
-				8);
-	} else {
-		TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-				PREP_NVRAM_DATA, 8);
-	}
-
-	ppc_md.calibrate_decr = prep_calibrate_decr;
-	ppc_md.set_rtc_time   = todc_set_rtc_time;
-	ppc_md.get_rtc_time   = todc_get_rtc_time;
-
-	ppc_md.setup_io_mappings = prep_map_io;
-
-#ifdef CONFIG_SMP
-	smp_ops			 = &prep_smp_ops;
-#endif /* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
deleted file mode 100644
index 93bd593cf957..000000000000
--- a/arch/ppc/platforms/prpmc750.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Board setup routines for Motorola PrPMC750
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/slab.h>
-#include <linux/serial_reg.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include "prpmc750.h"
-
-extern unsigned long loops_per_jiffy;
-
-extern void gen550_progress(char *, unsigned short);
-
-static u_char prpmc750_openpic_initsenses[] __initdata =
-{
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UART */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_DEBUGINT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HAWK_WDT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_ABORT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static void __init prpmc750_pcibios_fixup(void)
-{
-	struct pci_dev *dev;
-	unsigned short wtmp;
-
-	/*
-	 * Kludge to clean up after PPC6BUG which doesn't
-	 * configure the CL5446 VGA card.  Also the
-	 * resource subsystem doesn't fixup the
-	 * PCI mem resources on the CL5446.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_CIRRUS,
-				   PCI_DEVICE_ID_CIRRUS_5446, 0))) {
-		dev->resource[0].start += PRPMC750_PCI_PHY_MEM_OFFSET;
-		dev->resource[0].end += PRPMC750_PCI_PHY_MEM_OFFSET;
-		pci_read_config_word(dev, PCI_COMMAND, &wtmp);
-		pci_write_config_word(dev, PCI_COMMAND, wtmp | 3);
-		/* Enable Color mode in MISC reg */
-		outb(0x03, 0x3c2);
-		/* Select DRAM config reg */
-		outb(0x0f, 0x3c4);
-		/* Set proper DRAM config */
-		outb(0xdf, 0x3c5);
-		pci_dev_put(dev);
-	}
-}
-
-void __init prpmc750_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->io_base_virt = (void *)PRPMC750_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC750_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC750_PCI_IO_START,
-			  PRPMC750_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  PRPMC750_PROC_PCI_MEM_START,
-			  PRPMC750_PROC_PCI_MEM_END,
-			  IORESOURCE_MEM, "PCI host bridge");
-
-	hose->io_space.start = PRPMC750_PCI_IO_START;
-	hose->io_space.end = PRPMC750_PCI_IO_END;
-	hose->mem_space.start = PRPMC750_PCI_MEM_START;
-	hose->mem_space.end = PRPMC750_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PRPMC750_HAWK_PPC_REG_BASE,
-		      PRPMC750_PROC_PCI_MEM_START,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-		      PRPMC750_PROC_PCI_IO_START, PRPMC750_PROC_PCI_IO_END,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-	    != 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = prpmc750_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-}
-static int prpmc750_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC750\n");
-
-	return 0;
-}
-
-static void __init prpmc750_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc750_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	OpenPIC_InitSenses = prpmc750_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc750_openpic_initsenses);
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			"(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-static unsigned long __init prpmc750_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-		    PRPMC750_BAUDOUT_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-			    PRPMC750_BAUDOUT_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end - tbl_start) * 128;
-
-	return bus_speed;
-}
-
-static void __init prpmc750_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	freq = prpmc750_get_bus_speed();
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-static void prpmc750_restart(char *cmd)
-{
-	local_irq_disable();
-	writeb(PRPMC750_MODRST_MASK, PRPMC750_MODRST_REG);
-	while (1) ;
-}
-
-static void prpmc750_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc750_power_off(void)
-{
-	prpmc750_halt();
-}
-
-static void __init prpmc750_init_IRQ(void)
-{
-	openpic_init(0);
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc750_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Falcon/Hawk memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc750_find_end_of_memory(void)
-{
-	/* Read the memory size from the Hawk SMC */
-	return hawk_get_mem_size(PRPMC750_HAWK_SMC_BASE);
-}
-
-static void __init prpmc750_map_io(void)
-{
-	io_block_mapping(PRPMC750_ISA_IO_BASE, PRPMC750_ISA_IO_BASE,
-			 0x10000000, _PAGE_IO);
-#if 0
-	io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
-#endif
-	io_block_mapping(0xf8000000, 0xf8000000, 0x08000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Cover the Hawk registers with a BAT */
-	prpmc750_set_bat();
-
-	isa_io_base = PRPMC750_ISA_IO_BASE;
-	isa_mem_base = PRPMC750_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC750_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc750_setup_arch;
-	ppc_md.show_cpuinfo = prpmc750_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc750_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc750_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc750_map_io;
-
-	ppc_md.restart = prpmc750_restart;
-	ppc_md.power_off = prpmc750_power_off;
-	ppc_md.halt = prpmc750_halt;
-
-	/* PrPMC750 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc750_calibrate_decr;
-
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h
deleted file mode 100644
index c4dcff09d7ca..000000000000
--- a/arch/ppc/platforms/prpmc750.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc750.h
- *
- * Definitions for Motorola PrPMC750 board support
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PRPMC750_H__
-#define __ASM_PRPMC750_H__
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PrPMC750 carrier board operates using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PRPMC750_ISA_IO_BASE		PREP_ISA_IO_BASE
-#define PRPMC750_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-
-/* PCI Memory space mapping info */
-#define PRPMC750_PCI_MEM_SIZE		0x30000000U
-#define PRPMC750_PROC_PCI_MEM_START	PRPMC750_ISA_MEM_BASE
-#define PRPMC750_PROC_PCI_MEM_END	(PRPMC750_PROC_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-#define PRPMC750_PCI_MEM_START		0x00000000U
-#define PRPMC750_PCI_MEM_END		(PRPMC750_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PRPMC750_PCI_IO_SIZE		0x10000000U
-#define PRPMC750_PROC_PCI_IO_START	PRPMC750_ISA_IO_BASE
-#define PRPMC750_PROC_PCI_IO_END	(PRPMC750_PROC_PCI_IO_START +	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-#define PRPMC750_PCI_IO_START		0x00000000U
-#define PRPMC750_PCI_IO_END		(PRPMC750_PCI_IO_START + 	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-
-/* System memory mapping info */
-#define PRPMC750_PCI_DRAM_OFFSET	PREP_PCI_DRAM_OFFSET
-#define PRPMC750_PCI_PHY_MEM_OFFSET	(PRPMC750_ISA_MEM_BASE-PRPMC750_PCI_MEM_START)
-
-/* Register address definitions */
-#define PRPMC750_HAWK_SMC_BASE		0xfef80000U
-#define PRPMC750_HAWK_PPC_REG_BASE	0xfeff0000U
-
-#define PRPMC750_BASE_BAUD		1843200
-#define PRPMC750_SERIAL_0		0xfef88000
-#define PRPMC750_SERIAL_0_DLL		(PRPMC750_SERIAL_0 + (UART_DLL << 4))
-#define PRPMC750_SERIAL_0_DLM		(PRPMC750_SERIAL_0 + (UART_DLM << 4))
-#define PRPMC750_SERIAL_0_LCR		(PRPMC750_SERIAL_0 + (UART_LCR << 4))
-
-#define PRPMC750_STATUS_REG		0xfef88080
-#define PRPMC750_BAUDOUT_MASK		0x02
-#define PRPMC750_MONARCH_MASK		0x01
-
-#define PRPMC750_MODRST_REG		0xfef880a0
-#define PRPMC750_MODRST_MASK		0x01
-
-#define PRPMC750_PIRQ_REG		0xfef880b0
-#define PRPMC750_SEL1_MASK		0x02
-#define PRPMC750_SEL0_MASK		0x01
-
-#define PRPMC750_TBEN_REG		0xfef880c0
-#define PRPMC750_TBEN_MASK		0x01
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD  (PRPMC750_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC750_SERIAL_0, 1, STD_COM_FLAGS, \
-		iomem_base: (unsigned char *)PRPMC750_SERIAL_0, \
-		iomem_reg_shift: 4, \
-		io_type: SERIAL_IO_MEM } /* ttyS0 */
-
-#endif				/* __ASM_PRPMC750_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
deleted file mode 100644
index 5bcda7f92cd0..000000000000
--- a/arch/ppc/platforms/prpmc800.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/harrier.h>
-
-#include "prpmc800.h"
-
-#define HARRIER_REVI_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_REVI_OFF)
-#define HARRIER_UCTL_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_UCTL_OFF)
-#define HARRIER_MISC_CSR_REG   (PRPMC800_HARRIER_XCSR_BASE+HARRIER_MISC_CSR_OFF)
-#define HARRIER_IFEVP_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEVP_OFF)
-#define HARRIER_IFEDE_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEDE_OFF)
-#define HARRIER_FEEN_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEEN_OFF)
-#define HARRIER_FEMA_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEMA_OFF)
-
-#define HARRIER_VENI_REG	(PRPMC800_HARRIER_XCSR_BASE + HARRIER_VENI_OFF)
-#define HARRIER_MISC_CSR	(PRPMC800_HARRIER_XCSR_BASE + \
-				 HARRIER_MISC_CSR_OFF)
-
-#define MONARCH	(monarch != 0)
-#define NON_MONARCH (monarch == 0)
-
-extern int mpic_init(void);
-extern unsigned long loops_per_jiffy;
-extern void gen550_progress(char *, unsigned short);
-
-static int monarch = 0;
-static int found_self = 0;
-static int self = 0;
-
-static u_char prpmc800_openpic_initsenses[] __initdata =
-{
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT0 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_DEBUGINT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_WDT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT1 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT2 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT3 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTA */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTB */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTC */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTD */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_INT (UARTS, ABORT, DMA) */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-prpmc_read_config_dword(struct pci_controller *hose, u8 bus, u8 devfn,
-			int offset, u32 * val)
-{
-	/* paranoia */
-	if ((hose == NULL) ||
-	    (hose->cfg_addr == NULL) || (hose->cfg_data == NULL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr, ((offset & 0xfc) << 24) | (devfn << 16)
-		 | ((bus - hose->bus_offset) << 8) | 0x80);
-	*val = in_le32((u32 *) (hose->cfg_data + (offset & 3)));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#define HARRIER_PCI_VEND_DEV_ID	(PCI_VENDOR_ID_MOTOROLA | \
-				 (PCI_DEVICE_ID_MOTOROLA_HARRIER << 16))
-static int prpmc_self(u8 bus, u8 devfn)
-{
-	/*
-	 * Harriers always view themselves as being on bus 0. If we're not
-	 * looking at bus 0, we're not going to find ourselves.
-	 */
-	if (bus != 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else {
-		int result;
-		int val;
-		struct pci_controller *hose;
-
-		hose = pci_bus_to_hose(bus);
-
-		/* See if target device is a Harrier */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 PCI_VENDOR_ID, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    (val != HARRIER_PCI_VEND_DEV_ID))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/*
-		 * LBA bit is set if target Harrier == initiating Harrier
-		 * (i.e. if we are reading our own PCI header).
-		 */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 HARRIER_LBA_OFF, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    ((val & HARRIER_LBA_MSK) != HARRIER_LBA_MSK))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/* It's us, save our location for later */
-		self = devfn;
-		found_self = 1;
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-static int prpmc_exclude_device(u8 bus, u8 devfn)
-{
-	/*
-	 * Monarch is allowed to access all PCI devices. Non-monarch is
-	 * only allowed to access its own Harrier.
-	 */
-
-	if (MONARCH)
-		return PCIBIOS_SUCCESSFUL;
-	if (found_self)
-		if ((bus == 0) && (devfn == self))
-			return PCIBIOS_SUCCESSFUL;
-		else
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return prpmc_self(bus, devfn);
-}
-
-void __init prpmc800_find_bridges(void)
-{
-	struct pci_controller *hose;
-	int host_bridge;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	ppc_md.pci_exclude_device = prpmc_exclude_device;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-
-	setup_indirect_pci(hose,
-			   PRPMC800_PCI_CONFIG_ADDR, PRPMC800_PCI_CONFIG_DATA);
-
-	/* Get host bridge vendor/dev id */
-
-	host_bridge = in_be32((uint *) (HARRIER_VENI_REG));
-
-	if (host_bridge != HARRIER_VEND_DEV_ID) {
-		printk(KERN_CRIT "Host bridge 0x%x not supported\n",
-				host_bridge);
-		return;
-	}
-
-	monarch = in_be32((uint *) HARRIER_MISC_CSR) & HARRIER_SYSCON;
-
-	printk(KERN_INFO "Running as %s.\n",
-			MONARCH ? "Monarch" : "Non-Monarch");
-
-	hose->io_space.start = PRPMC800_PCI_IO_START;
-	hose->io_space.end = PRPMC800_PCI_IO_END;
-	hose->io_base_virt = (void *)PRPMC800_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC800_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC800_PCI_IO_START, PRPMC800_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	if (MONARCH) {
-		hose->mem_space.start = PRPMC800_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_PCI_MEM_END;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_PCI_MEM_START,
-				  PRPMC800_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_PROC_PCI_MEM_START,
-				 PRPMC800_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-		harrier_wait_eready(PRPMC800_HARRIER_XCSR_BASE);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	} else {
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_NM_PCI_MEM_START,
-				  PRPMC800_NM_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		hose->mem_space.start = PRPMC800_NM_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_NM_PCI_MEM_END;
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_NM_PROC_PCI_MEM_START,
-				 PRPMC800_NM_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_setup_nonmonarch(PRPMC800_HARRIER_XCSR_BASE,
-					 HARRIER_ITSZ_1MB);
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-	}
-}
-
-static int prpmc800_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC800\n");
-
-	return 0;
-}
-
-static void __init prpmc800_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc800_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			 "(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC800's tbl frequency using the baud clock as a reference.
- */
-static void __init prpmc800_calibrate_decr(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, tb_ticks_per_second;
-	unsigned int count;
-	unsigned int harrier_revision;
-
-	harrier_revision = readb(HARRIER_REVI_REG);
-	if (harrier_revision < 2) {
-		/* XTAL64 was broken in harrier revision 1 */
-		printk(KERN_INFO "time_init: Harrier revision %d, assuming "
-				 "100 Mhz bus\n", harrier_revision);
-		tb_ticks_per_second = 100000000 / 4;
-		tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-		tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-		return;
-	}
-
-	/*
-	 * The XTAL64 bit oscillates at the 1/64 the base baud clock
-	 * Set count to XTAL64 cycles per second.  Since we'll count
-	 * half-cycles, we'll reach the count in half a second.
-	 */
-	count = PRPMC800_BASE_BAUD / 64;
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	do {
-		current_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges (half-cycles)
-	 * equal to the count (half a second)
-	 */
-	do {
-		do {
-			current_state = readb(HARRIER_UCTL_REG) &
-			    HARRIER_XTAL64_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* We only counted for half a second, so double to get ticks/second */
-	tb_ticks_per_second = (tbl_end - tbl_start) * 2;
-	tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-	tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-}
-
-static void prpmc800_restart(char *cmd)
-{
-	ulong temp;
-
-	local_irq_disable();
-	temp = in_be32((uint *) HARRIER_MISC_CSR_REG);
-	temp |= HARRIER_RSTOUT;
-	out_be32((uint *) HARRIER_MISC_CSR_REG, temp);
-	while (1) ;
-}
-
-static void prpmc800_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc800_power_off(void)
-{
-	prpmc800_halt();
-}
-
-static void __init prpmc800_init_IRQ(void)
-{
-	OpenPIC_InitSenses = prpmc800_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc800_openpic_initsenses);
-
-	/* Setup external interrupt sources. */
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-	/* Setup internal UART interrupt source. */
-	openpic_set_sources(16, 1, OpenPIC_Addr + 0x10200);
-
-	/* Do the MPIC initialization based on the above settings. */
-	openpic_init(0);
-
-	/* enable functional exceptions for uarts and abort */
-	out_8((u8 *) HARRIER_FEEN_REG, (HARRIER_FE_UA0 | HARRIER_FE_UA1));
-	out_8((u8 *) HARRIER_FEMA_REG, ~(HARRIER_FE_UA0 | HARRIER_FE_UA1));
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc800_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Harrier memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc800_find_end_of_memory(void)
-{
-	/* Read the memory size from the Harrier XCSR */
-	return harrier_get_mem_size(PRPMC800_HARRIER_XCSR_BASE);
-}
-
-static void __init prpmc800_map_io(void)
-{
-	io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	prpmc800_set_bat();
-
-	isa_io_base = PRPMC800_ISA_IO_BASE;
-	isa_mem_base = PRPMC800_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC800_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc800_setup_arch;
-	ppc_md.show_cpuinfo = prpmc800_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc800_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc800_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc800_map_io;
-
-	ppc_md.restart = prpmc800_restart;
-	ppc_md.power_off = prpmc800_power_off;
-	ppc_md.halt = prpmc800_halt;
-
-	/* PrPMC800 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc800_calibrate_decr;
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#else				/* !CONFIG_SERIAL_TEXT_DEBUG */
-	ppc_md.progress = NULL;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
deleted file mode 100644
index 26f604e05cfa..000000000000
--- a/arch/ppc/platforms/prpmc800.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc800.h
- *
- * Definitions for Motorola PrPMC800 board support
- *
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- /*
-  * From Processor to PCI:
-  *   PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
-  *   PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
-  *      Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
-  *
-  * From PCI to Processor:
-  *   System Memory: 0x00000000 -> 0x00000000
-  */
-
-#ifndef __ASMPPC_PRPMC800_H
-#define __ASMPPC_PRPMC800_H
-
-#define PRPMC800_PCI_CONFIG_ADDR		0xfe000cf8
-#define PRPMC800_PCI_CONFIG_DATA		0xfe000cfc
-
-#define PRPMC800_PROC_PCI_IO_START		0xfe400000U
-#define PRPMC800_PROC_PCI_IO_END		0xfeefffffU
-#define PRPMC800_PCI_IO_START			0x00000000U
-#define PRPMC800_PCI_IO_END			0x00afffffU
-
-#define PRPMC800_PROC_PCI_MEM_START		0x80000000U
-#define PRPMC800_PROC_PCI_MEM_END		0x9fffffffU
-#define PRPMC800_PCI_MEM_START			0x80000000U
-#define PRPMC800_PCI_MEM_END			0x9fffffffU
-
-#define PRPMC800_NM_PROC_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PROC_PCI_MEM_END		0xdfffffffU
-#define PRPMC800_NM_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PCI_MEM_END			0xdfffffffU
-
-#define PRPMC800_PCI_DRAM_OFFSET		0x00000000U
-#define PRPMC800_PCI_PHY_MEM_OFFSET		0x00000000U
-
-#define PRPMC800_ISA_IO_BASE			PRPMC800_PROC_PCI_IO_START
-#define PRPMC800_ISA_MEM_BASE			0x00000000U
-
-#define PRPMC800_HARRIER_XCSR_BASE		HARRIER_DEFAULT_XCSR_BASE
-#define PRPMC800_HARRIER_MPIC_BASE		0xff000000
-
-#define PRPMC800_SERIAL_1			0xfeff00c0
-
-#define PRPMC800_BASE_BAUD			1843200
-
-/*
- * interrupt vector number and priority for harrier internal interrupt
- * sources
- */
-#define PRPMC800_INT_IRQ			16
-#define PRPMC800_INT_PRI			15
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* UARTS are at IRQ 16 */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
-		iomem_base: (unsigned char *)PRPMC800_SERIAL_1,		\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif				/* __ASMPPC_PRPMC800_H */
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
deleted file mode 100644
index f1dee1e87809..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ /dev/null
@@ -1,1492 +0,0 @@
-/*
- * Board setup routines for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/* Radstone PPC7D boards are rugged VME boards with PPC 7447A CPUs,
- * Discovery-II, dual gigabit ethernet, dual PMC, USB, keyboard/mouse,
- * 4 serial ports, 2 high speed serial ports (MPSCs) and optional
- * SCSI / VGA.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx.h>
-#include <linux/netdevice.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/mv64x60.h>
-
-#include "radstone_ppc7d.h"
-
-#undef DEBUG
-
-#define PPC7D_RST_PIN			17 	/* GPP17 */
-
-extern u32 mv64360_irq_base;
-extern spinlock_t rtc_lock;
-
-static struct mv64x60_handle bh;
-static int ppc7d_has_alma;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-
-/* FIXME - move to h file */
-extern int ds1337_do_command(int id, int cmd, void *arg);
-#define DS1337_GET_DATE         0
-#define DS1337_SET_DATE         1
-
-/* residual data */
-unsigned char __res[sizeof(bd_t)];
-
-/*****************************************************************************
- * Serial port code
- *****************************************************************************/
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-static void __init ppc7d_early_serial_map(void)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#elif defined(CONFIG_SERIAL_8250)
-	struct uart_port serial_req;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = UART_CLK;
-	serial_req.irq = 4;
-	serial_req.flags = STD_COM_FLAGS;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_0;
-
-	gen550_init(0, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = 3;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_1;
-
-	gen550_init(1, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 1 failed\n");
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif
-}
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-/*****************************************************************************
- * Low-level board support code
- *****************************************************************************/
-
-static unsigned long __init ppc7d_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *) __res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	return (256 * 1024 * 1024);
-}
-
-static void __init ppc7d_map_io(void)
-{
-	/* remove temporary mapping */
-	mtspr(SPRN_DBAT3U, 0x00000000);
-	mtspr(SPRN_DBAT3L, 0x00000000);
-
-	io_block_mapping(0xe8000000, 0xe8000000, 0x08000000, _PAGE_IO);
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void ppc7d_restart(char *cmd)
-{
-	u32 data;
-
-	/* Disable GPP17 interrupt */
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data &= ~(1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/* Configure MPP17 as GPP */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	/* Enable pin GPP17 for output */
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data |= (1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Toggle GPP9 pin to reset the board */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, 1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, 1 << PPC7D_RST_PIN);
-
-	for (;;) ;		/* Spin until reset happens */
-	/* NOTREACHED */
-}
-
-static void ppc7d_power_off(void)
-{
-	u32 data;
-
-	local_irq_disable();
-
-	/* Ensure that internal MV643XX watchdog is disabled.
-	 * The Disco watchdog uses MPP17 on this hardware.
-	 */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	data = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data & 0x80000000) {
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 1 << 24);
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 2 << 24);
-	}
-
-	for (;;) ;		/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void ppc7d_halt(void)
-{
-	ppc7d_power_off();
-	/* NOTREACHED */
-}
-
-static unsigned long ppc7d_led_no_pulse;
-
-static int __init ppc7d_led_pulse_disable(char *str)
-{
-	ppc7d_led_no_pulse = 1;
-	return 1;
-}
-
-/* This kernel option disables the heartbeat pulsing of a board LED */
-__setup("ledoff", ppc7d_led_pulse_disable);
-
-static void ppc7d_heartbeat(void)
-{
-	u32 data32;
-	u8 data8;
-	static int max706_wdog = 0;
-
-	/* Unfortunately we can't access the LED control registers
-	 * during early init because they're on the CPLD which is the
-	 * other side of a PCI bridge which goes unreachable during
-	 * PCI scan. So write the LEDs only if the MV64360 watchdog is
-	 * enabled (i.e. userspace apps are running so kernel is up)..
-	 */
-	data32 = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data32 & 0x80000000) {
-		/* Enable MAX706 watchdog if not done already */
-		if (!max706_wdog) {
-			outb(3, PPC7D_CPLD_RESET);
-			max706_wdog = 1;
-		}
-
-		/* Hit the MAX706 watchdog */
-		outb(0, PPC7D_CPLD_WATCHDOG_TRIG);
-
-		/* Pulse LED DS219 if not disabled */
-		if (!ppc7d_led_no_pulse) {
-			static int led_on = 0;
-
-			data8 = inb(PPC7D_CPLD_LEDS);
-			if (led_on)
-				data8 &= ~PPC7D_CPLD_LEDS_DS219_MASK;
-			else
-				data8 |= PPC7D_CPLD_LEDS_DS219_MASK;
-
-			outb(data8, PPC7D_CPLD_LEDS);
-			led_on = !led_on;
-		}
-	}
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-static int ppc7d_show_cpuinfo(struct seq_file *m)
-{
-	u8 val;
-	u8 val1, val2;
-	static int flash_sizes[4] = { 64, 32, 0, 16 };
-	static int flash_banks[4] = { 4, 3, 2, 1 };
-	static int sdram_bank_sizes[4] = { 128, 256, 512, 1 };
-	int sdram_num_banks = 2;
-	static char *pci_modes[] = { "PCI33", "PCI66",
-		"Unknown", "Unknown",
-		"PCIX33", "PCIX66",
-		"PCIX100", "PCIX133"
-	};
-
-	seq_printf(m, "vendor\t\t: Radstone Technology\n");
-	seq_printf(m, "machine\t\t: PPC7D\n");
-
-	val = inb(PPC7D_CPLD_BOARD_REVISION);
-	val1 = (val & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	val2 = (val & PPC7D_CPLD_BOARD_REVISION_LETTER_MASK);
-	seq_printf(m, "revision\t: %hd%c%c\n",
-		   val1,
-		   (val2 <= 0x18) ? 'A' + val2 : 'Y',
-		   (val2 > 0x18) ? 'A' + (val2 - 0x19) : ' ');
-
-	val = inb(PPC7D_CPLD_MOTHERBOARD_TYPE);
-	val1 = val & PPC7D_CPLD_MB_TYPE_PLL_MASK;
-	val2 = val & (PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK |
-		      PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK);
-	seq_printf(m, "bus speed\t: %dMHz\n",
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_133) ? 133 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_100) ? 100 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_64) ? 64 : 0);
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG);
-	if (val & PPC7D_CPLD_SDRAM_BANK_NUM_MASK) sdram_num_banks--;
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG_EXTEND);
-	val1 = (val & PPC7D_CPLD_SDRAM_BANK_SIZE_MASK) >> 6;
-	seq_printf(m, "SDRAM\t\t: %d banks of %d%c, total %d%c",
-		   sdram_num_banks,
-		   sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M',
-		   sdram_num_banks * sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M');
-	if (val2 & PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK) {
-		seq_printf(m, " [ECC %sabled]",
-			   (val2 & PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK) ? "en" :
-			   "dis");
-	}
-	seq_printf(m, "\n");
-
-	val1 = (val & PPC7D_CPLD_FLASH_DEV_SIZE_MASK);
-	val2 = (val & PPC7D_CPLD_FLASH_BANK_NUM_MASK) >> 2;
-	seq_printf(m, "FLASH\t\t: %d banks of %dM, total %dM\n",
-		   flash_banks[val2], flash_sizes[val1],
-		   flash_banks[val2] * flash_sizes[val1]);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL);
-	val1 = inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	seq_printf(m, "  write links\t: %s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "WRITE " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "USER " : "",
-		   (val & (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK)) ==
-		   0 ? "NONE" : "");
-	seq_printf(m, "  write sector h/w enables: %s%s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK) ? "RECOVERY " :
-		   "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK) ? "USER " : "",
-		   (val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ? "NVRAM " :
-		   "",
-		   (((val &
-		      (PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK)) == 0)
-		    && ((val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ==
-			0)) ? "NONE" : "");
-	val1 =
-	    inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT) &
-	    (PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK |
-	     PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK);
-	seq_printf(m, "  software sector enables: %s%s%s\n",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK) ? "SYSBOOT "
-		   : "",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK) ? "USER " : "",
-		   (val1 == 0) ? "NONE " : "");
-
-	seq_printf(m, "Boot options\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK) ?
-		   "ALTERNATE " : "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK) ? "VME " :
-		   "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK) ? "RECOVERY "
-		   : "",
-		   ((val &
-		     (PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK)) ==
-		    0) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_1);
-	seq_printf(m, "Fitted modules\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK) ? "" : "PMC1 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK) ? "" : "PMC2 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) ? "AFIX " : "",
-		   ((val & (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK)) ==
-		    (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-		     PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK)) ? "NONE" : "");
-
-	if (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) {
-		static const char *ids[] = {
-			"unknown",
-			"1553 (Dual Channel)",
-			"1553 (Single Channel)",
-			"8-bit SCSI + VGA",
-			"16-bit SCSI + VGA",
-			"1553 (Single Channel with sideband)",
-			"1553 (Dual Channel with sideband)",
-			NULL
-		};
-		u8 id = __raw_readb((void *)PPC7D_AFIX_REG_BASE + 0x03);
-		seq_printf(m, "AFIX module\t: 0x%hx [%s]\n", id,
-			   id < 7 ? ids[id] : "unknown");
-	}
-
-	val = inb(PPC7D_CPLD_PCI_CONFIG);
-	val1 = (val & PPC7D_CPLD_PCI_CONFIG_PCI0_MASK) >> 4;
-	val2 = (val & PPC7D_CPLD_PCI_CONFIG_PCI1_MASK);
-	seq_printf(m, "PCI#0\t\t: %s\nPCI#1\t\t: %s\n",
-		   pci_modes[val1], pci_modes[val2]);
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "PMC1\t\t: %s\nPMC2\t\t: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK) ? "3.3v" : "5v",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK) ? "3.3v" : "5v");
-	seq_printf(m, "PMC power source: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK) ? "VME" :
-		   "internal");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_4);
-	val2 = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "Fit options\t: %s%s%s%s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_LPT_MASK) ? "LPT " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED) ? "PS2 " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED) ? "USB2 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK) ? "VME " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_COM36_MASK) ? "COM3-6 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK) ? "eth0 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK) ? "eth1 " :
-		   "");
-
-	val = inb(PPC7D_CPLD_ID_LINK);
-	val1 = val & (PPC7D_CPLD_ID_LINK_E6_MASK |
-		      PPC7D_CPLD_ID_LINK_E7_MASK |
-		      PPC7D_CPLD_ID_LINK_E12_MASK |
-		      PPC7D_CPLD_ID_LINK_E13_MASK);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL) &
-	    (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK);
-
-	seq_printf(m, "Board links present: %s%s%s%s%s%s%s%s\n",
-		   (val1 & PPC7D_CPLD_ID_LINK_E6_MASK) ? "E6 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E7_MASK) ? "E7 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "E9 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "E10 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "E11 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E12_MASK) ? "E12 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E13_MASK) ? "E13 " : "",
-		   ((val == 0) && (val1 == 0)) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_WDOG_RESETSW_MASK);
-	seq_printf(m, "Front panel reset switch: %sabled\n",
-		   (val & PPC7D_CPLD_WDOG_RESETSW_MASK) ? "dis" : "en");
-
-	return 0;
-}
-
-static void __init ppc7d_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = 100000000 / 4;
-
-	pr_debug("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		 freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*****************************************************************************
- * Interrupt stuff
- *****************************************************************************/
-
-static irqreturn_t ppc7d_i8259_intr(int irq, void *dev_id)
-{
-	u32 temp = mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-	if (temp & (1 << 28)) {
-		i8259_irq();
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, temp & (~(1 << 28)));
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-/*
- * Each interrupt cause is assigned an IRQ number.
- * Southbridge has 16*2 (two 8259's) interrupts.
- * Discovery-II has 96 interrupts (cause-hi, cause-lo, gpp x 32).
- * If multiple interrupts are pending, get_irq() returns the
- * lowest pending irq number first.
- *
- *
- * IRQ #   Source                              Trig   Active
- * =============================================================
- *
- * Southbridge
- * -----------
- * IRQ #   Source                              Trig
- * =============================================================
- * 0       ISA High Resolution Counter         Edge
- * 1       Keyboard                            Edge
- * 2       Cascade From (IRQ 8-15)             Edge
- * 3       Com 2 (Uart 2)                      Edge
- * 4       Com 1 (Uart 1)                      Edge
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- * 6       GPIO                                Level
- * 7       LPT                                 Edge
- * 8       RTC Alarm                           Edge
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 11      USB2                                Level
- * 12      Mouse                               Edge
- * 13      Reserved internally by Ali M1535+
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 15      COM 5/6                             Level
- *
- * 16..112 Discovery-II...
- *
- * MPP28   Southbridge                         Edge   High
- *
- *
- * Interrupts are cascaded through to the Discovery-II.
- *
- *  PCI ---
- *         \
- * CPLD --> ALI1535 -------> DISCOVERY-II
- *        INTF           MPP28
- */
-static void __init ppc7d_init_irq(void)
-{
-	int irq;
-
-	pr_debug("%s\n", __func__);
-	i8259_init(0, 0);
-	mv64360_init_irq();
-
-	/* IRQs 5,6,9,10,11,14,15 are level sensitive */
-	irq_desc[5].status |= IRQ_LEVEL;
-	irq_desc[6].status |= IRQ_LEVEL;
-	irq_desc[9].status |= IRQ_LEVEL;
-	irq_desc[10].status |= IRQ_LEVEL;
-	irq_desc[11].status |= IRQ_LEVEL;
-	irq_desc[14].status |= IRQ_LEVEL;
-	irq_desc[15].status |= IRQ_LEVEL;
-
-	/* GPP28 is edge triggered */
-	irq_desc[mv64360_irq_base + MV64x60_IRQ_GPP28].status &= ~IRQ_LEVEL;
-}
-
-static u32 ppc7d_irq_canonicalize(u32 irq)
-{
-	if ((irq >= 16) && (irq < (16 + 96)))
-		irq -= 16;
-
-	return irq;
-}
-
-static int ppc7d_get_irq(void)
-{
-	int irq;
-
-	irq = mv64360_get_irq();
-	if (irq == (mv64360_irq_base + MV64x60_IRQ_GPP28))
-		irq = i8259_irq();
-	return irq;
-}
-
-/*
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- */
-static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel,
-				unsigned char pin)
-{
-	static const char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{10, 14, 5, 9},	/* IDSEL 10 - PMC2 / AFIX IRQW */
-		{9, 10, 14, 5},	/* IDSEL 11 - PMC1 / AFIX IRQX */
-		{5, 9, 10, 14},	/* IDSEL 12 - AFIX IRQY */
-		{14, 5, 9, 10},	/* IDSEL 13 - AFIX IRQZ */
-	};
-	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
-
-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
-		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init ppc7d_intr_setup(void)
-{
-	u32 data;
-
-	/*
-	 * Define GPP 28 interrupt polarity as active high
-	 * input signal and level triggered
-	 */
-	data = mv64x60_read(&bh, MV64x60_GPP_LEVEL_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_LEVEL_CNTL, data);
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	data = mv64x60_read(&bh, MV64x60_COMM_ARBITER_CNTL);
-	data |= (1 << 10);
-	mv64x60_write(&bh, MV64x60_COMM_ARBITER_CNTL, data);
-
-	/* XXXX Erranum FEr PCI-#8 */
-	data = mv64x60_read(&bh, MV64x60_PCI0_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI0_CMD, data);
-	data = mv64x60_read(&bh, MV64x60_PCI1_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI1_CMD, data);
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1 << 28));
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data |= (1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT27 summarizes GPP interrupts 23-31
-	 */
-	mv64x60_write(&bh, MV64360_IC_MAIN_CAUSE_HI, ~(1 << 27));
-	data = mv64x60_read(&bh, MV64360_IC_CPU0_INTR_MASK_HI);
-	data |= (1 << 27);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI, data);
-}
-
-/*****************************************************************************
- * Platform device data fixup routines.
- *****************************************************************************/
-
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init ppc7d_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = PPC7D_DEFAULT_BAUD;
-	pdata->brg_clk_src = PPC7D_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = PPC7D_MPSC_CLK_FREQ;
-
-	return;
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init ppc7d_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		PPC7D_ETH0_PHY_ADDR,
-		PPC7D_ETH1_PHY_ADDR,
-		PPC7D_ETH2_PHY_ADDR,
-	};
-	int i;
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = PPC7D_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = PPC7D_ETH_RX_QUEUE_SIZE;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name,
-				 (int)r->start);
-		}
-	}
-
-}
-#endif
-
-#if defined(CONFIG_I2C_MV64XXX)
-static void __init
-ppc7d_fixup_i2c_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_i2c_pdata *pdata;
-	int i;
-
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL) {
-		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-		if (pdata == NULL)
-			return;
-
-		pdev->dev.platform_data = pdata;
-	}
-
-	/* divisors M=8, N=3 for 100kHz I2C from 133MHz system clock */
-	pdata->freq_m = 8;
-	pdata->freq_n = 3;
-	pdata->timeout = 500;
-	pdata->retries = 3;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name, (int) r->start);
-		}
-	}
-}
-#endif
-
-static int ppc7d_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ppc7d_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ppc7d_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ppc7d_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_I2C_MV64XXX)
-		{ MV64XXX_I2C_CTLR_NAME ".0", ppc7d_fixup_i2c_pdata },
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-/*****************************************************************************
- * PCI device fixups.
- * These aren't really fixups per se. They are used to init devices as they
- * are found during PCI scan.
- *
- * The PPC7D has an HB8 PCI-X bridge which must be set up during a PCI
- * scan in order to find other devices on its secondary side.
- *****************************************************************************/
-
-static void __init ppc7d_fixup_hb8(struct pci_dev *dev)
-{
-	u16 val16;
-
-	if (dev->bus->number == 0) {
-		pr_debug("PCI: HB8 init\n");
-
-		pci_write_config_byte(dev, 0x1c,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR & 0xf000)
-				       >> 8) | 0x01);
-		pci_write_config_byte(dev, 0x1d,
-				      (((PPC7D_PCI0_IO_START_PCI_ADDR +
-					 PPC7D_PCI0_IO_SIZE -
-					 1) & 0xf000) >> 8) | 0x01);
-		pci_write_config_word(dev, 0x30,
-				      PPC7D_PCI0_IO_START_PCI_ADDR >> 16);
-		pci_write_config_word(dev, 0x32,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR +
-					PPC7D_PCI0_IO_SIZE -
-					1) >> 16) & 0xffff);
-
-		pci_write_config_word(dev, 0x20,
-				      PPC7D_PCI0_MEM0_START_PCI_LO_ADDR >> 16);
-		pci_write_config_word(dev, 0x22,
-				      ((PPC7D_PCI0_MEM0_START_PCI_LO_ADDR +
-					PPC7D_PCI0_MEM0_SIZE -
-					1) >> 16) & 0xffff);
-		pci_write_config_word(dev, 0x24, 0);
-		pci_write_config_word(dev, 0x26, 0);
-		pci_write_config_dword(dev, 0x28, 0);
-		pci_write_config_dword(dev, 0x2c, 0);
-
-		pci_read_config_word(dev, 0x3e, &val16);
-		val16 |= ((1 << 5) | (1 << 1));	/* signal master aborts and
-						 * SERR to primary
-						 */
-		val16 &= ~(1 << 2);		/* ISA disable, so all ISA
-						 * ports forwarded to secondary
-						 */
-		pci_write_config_word(dev, 0x3e, val16);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0028, ppc7d_fixup_hb8);
-
-/* This should perhaps be a separate driver as we're actually initializing
- * the chip for this board here. It's hardly a fixup...
- */
-static void __init ppc7d_fixup_ali1535(struct pci_dev *dev)
-{
-	pr_debug("PCI: ALI1535 init\n");
-
-	if (dev->bus->number == 1) {
-		/* Configure the ISA Port Settings */
-		pci_write_config_byte(dev, 0x43, 0x00);
-
-		/* Disable PCI Interrupt polling mode */
-		pci_write_config_byte(dev, 0x45, 0x00);
-
-		/* Multifunction pin select INTFJ -> INTF */
-		pci_write_config_byte(dev, 0x78, 0x00);
-
-		/* Set PCI INT -> IRQ Routing control in for external
-		 * pins south bridge.
-		 */
-		pci_write_config_byte(dev, 0x48, 0x31);	/* [7-4] INT B -> IRQ10
-							 * [3-0] INT A -> IRQ9
-							 */
-		pci_write_config_byte(dev, 0x49, 0x5D);	/* [7-4] INT D -> IRQ5
-							 * [3-0] INT C -> IRQ14
-							 */
-
-		/* PPC7D setup */
-		/* NEC USB device on IRQ 11 (INTE) - INTF disabled */
-		pci_write_config_byte(dev, 0x4A, 0x09);
-
-		/* GPIO on IRQ 6 */
-		pci_write_config_byte(dev, 0x76, 0x07);
-
-		/* SIRQ I (COMS 5/6) use IRQ line 15.
-		 * Positive (not subtractive) address decode.
-		 */
-		pci_write_config_byte(dev, 0x44, 0x0f);
-
-		/* SIRQ II disabled */
-		pci_write_config_byte(dev, 0x75, 0x0);
-
-		/* On board USB and RTC disabled */
-		pci_write_config_word(dev, 0x52, (1 << 14));
-		pci_write_config_byte(dev, 0x74, 0x00);
-
-		/* On board IDE disabled */
-		pci_write_config_byte(dev, 0x58, 0x00);
-
-		/* Decode 32-bit addresses */
-		pci_write_config_byte(dev, 0x5b, 0);
-
-		/* Disable docking IO */
-		pci_write_config_word(dev, 0x5c, 0x0000);
-
-		/* Disable modem, enable sound */
-		pci_write_config_byte(dev, 0x77, (1 << 6));
-
-		/* Disable hot-docking mode */
-		pci_write_config_byte(dev, 0x7d, 0x00);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1533, ppc7d_fixup_ali1535);
-
-static int ppc7d_pci_exclude_device(u8 bus, u8 devfn)
-{
-	/* Early versions of this board were fitted with IBM ALMA
-	 * PCI-VME bridge chips. The PCI config space of these devices
-	 * was not set up correctly and causes PCI scan problems.
-	 */
-	if ((bus == 1) && (PCI_SLOT(devfn) == 4) && ppc7d_has_alma)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return mv64x60_pci_exclude_device(bus, devfn);
-}
-
-/* This hook is called when each PCI bus is probed.
- */
-static void ppc7d_pci_fixup_bus(struct pci_bus *bus)
-{
-	pr_debug("PCI BUS %hu: %lx/%lx %lx/%lx %lx/%lx %lx/%lx\n",
-		 bus->number,
-		 bus->resource[0] ? bus->resource[0]->start : 0,
-		 bus->resource[0] ? bus->resource[0]->end : 0,
-		 bus->resource[1] ? bus->resource[1]->start : 0,
-		 bus->resource[1] ? bus->resource[1]->end : 0,
-		 bus->resource[2] ? bus->resource[2]->start : 0,
-		 bus->resource[2] ? bus->resource[2]->end : 0,
-		 bus->resource[3] ? bus->resource[3]->start : 0,
-		 bus->resource[3] ? bus->resource[3]->end : 0);
-
-	if ((bus->number == 1) && (bus->resource[2] != NULL)) {
-		/* Hide PCI window 2 of Bus 1 which is used only to
-		 * map legacy ISA memory space.
-		 */
-		bus->resource[2]->start = 0;
-		bus->resource[2]->end = 0;
-		bus->resource[2]->flags = 0;
-	}
-}
-
-/*****************************************************************************
- * Board device setup code
- *****************************************************************************/
-
-void __init ppc7d_setup_peripherals(void)
-{
-	u32 val32;
-
-	/* Set up windows for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 PPC7D_BOOT_WINDOW_BASE, PPC7D_BOOT_WINDOW_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Boot firmware configures the following DevCS addresses.
-	 * DevCS0 - board control/status
-	 * DevCS1 - test registers
-	 * DevCS2 - AFIX port/address registers (for identifying)
-	 * DevCS3 - FLASH
-	 *
-	 * We don't use DevCS0, DevCS1.
-	 */
-	val32 = mv64x60_read(&bh, MV64360_CPU_BAR_ENABLE);
-	val32 |= ((1 << 4) | (1 << 5));
-	mv64x60_write(&bh, MV64360_CPU_BAR_ENABLE, val32);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_SIZE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_SIZE, 0);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-				 PPC7D_AFIX_REG_BASE, PPC7D_AFIX_REG_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-				 PPC7D_FLASH_BASE, PPC7D_FLASH_SIZE_ACTUAL, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_0);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_0, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_1);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_1, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_2);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_2, val32);
-
-	val32 = mv64x60_read(&bh, MV64x60_TIMR_CNTR_0_3_CNTL);
-	val32 &= ~((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24));
-	mv64x60_write(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, val32);
-
-	/* Enumerate pci bus.
-	 *
-	 * We scan PCI#0 first (the bus with the HB8 and other
-	 * on-board peripherals). We must configure the 64360 before
-	 * each scan, according to the bus number assignments.  Busses
-	 * are assigned incrementally, starting at 0.  PCI#0 is
-	 * usually assigned bus#0, the secondary side of the HB8 gets
-	 * bus#1 and PCI#1 (second PMC site) gets bus#2.  However, if
-	 * any PMC card has a PCI bridge, these bus assignments will
-	 * change.
-	 */
-
-	/* Turn off PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 |= (1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Scan PCI#0 */
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-	printk(KERN_INFO "PCI#0: first=%d last=%d\n",
-	       bh.hose_a->first_busno, bh.hose_a->last_busno);
-
-	/* Scan PCI#1 */
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-	printk(KERN_INFO "PCI#1: first=%d last=%d\n",
-	       bh.hose_b->first_busno, bh.hose_b->last_busno);
-
-	/* Turn on PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 &= ~(1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Setup interrupts */
-	ppc7d_intr_setup();
-}
-
-static void __init ppc7d_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-	u32 temp;
-
-	mv64360_irq_base = 16;	/* first 16 intrs are 2 x 8259's */
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = PPC7D_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = PPC7D_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = PPC7D_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = PPC7D_PCI0_MEM0_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = PPC7D_PCI0_MEM0_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = PPC7D_PCI0_MEM0_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[1].cpu_base = PPC7D_PCI0_MEM1_START_PROC_ADDR;
-	si.pci_0.pci_mem[1].pci_base_hi = PPC7D_PCI0_MEM1_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[1].pci_base_lo = PPC7D_PCI0_MEM1_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[1].size = PPC7D_PCI0_MEM1_SIZE;
-	si.pci_0.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = PPC7D_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = PPC7D_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = PPC7D_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = PPC7D_PCI1_MEM0_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = PPC7D_PCI1_MEM0_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = PPC7D_PCI1_MEM0_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[1].cpu_base = PPC7D_PCI1_MEM1_START_PROC_ADDR;
-	si.pci_1.pci_mem[1].pci_base_hi = PPC7D_PCI1_MEM1_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[1].pci_base_lo = PPC7D_PCI1_MEM1_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[1].size = PPC7D_PCI1_MEM1_SIZE;
-	si.pci_1.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	/* Don't clear the SRAM window since we use it for debug */
-	si.window_preserve_mask_32_lo = (1 << MV64x60_CPU2SRAM_WIN);
-
-	printk(KERN_INFO "PCI: MV64360 PCI#0 IO at %x, size %x\n",
-	       si.pci_0.pci_io.cpu_base, si.pci_0.pci_io.size);
-	printk(KERN_INFO "PCI: MV64360 PCI#1 IO at %x, size %x\n",
-	       si.pci_1.pci_io.cpu_base, si.pci_1.pci_io.size);
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		/* All PPC7D hardware uses B0 or newer MV64360 silicon which
-		 * does not have snoop bugs.
-		 */
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_ERR "MV64360 initialization failed.\n");
-
-	pr_debug("MV64360 regs @ %lx/%p\n", bh.p_base, bh.v_base);
-
-	/* Enable WB Cache coherency on SRAM */
-	temp = mv64x60_read(&bh, MV64360_SRAM_CONFIG);
-	pr_debug("SRAM_CONFIG: %x\n", temp);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp & ~0x2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp | 0x2);
-#endif
-	/* If system operates with internal bus arbiter (CPU master
-	 * control bit8) clear AACK Delay bit [25] in CPU
-	 * configuration register.
-	 */
-	temp = mv64x60_read(&bh, MV64x60_CPU_MASTER_CNTL);
-	if (temp & (1 << 8)) {
-		temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-		mv64x60_write(&bh, MV64x60_CPU_CONFIG, (temp & ~(1 << 25)));
-	}
-
-	/* Data and address parity is enabled */
-	temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG,
-		      (temp | (1 << 26) | (1 << 19)));
-
-	pci_dram_offset = 0;	/* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc7d_map_irq;
-	ppc_md.pci_exclude_device = ppc7d_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->mem_space.start = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	bh.hose_a->mem_space.end =
-	    PPC7D_PCI0_MEM0_START_PCI_LO_ADDR + PPC7D_PCI0_MEM0_SIZE;
-
-	/* These will be set later, as a result of PCI0 scan */
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->mem_space.start = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	bh.hose_b->mem_space.end =
-	    PPC7D_PCI1_MEM0_START_PCI_LO_ADDR + PPC7D_PCI1_MEM0_SIZE;
-
-	pr_debug("MV64360: PCI#0 IO decode %08x/%08x IO remap %08x\n",
-		 mv64x60_read(&bh, 0x48), mv64x60_read(&bh, 0x50),
-		 mv64x60_read(&bh, 0xf0));
-}
-
-static void __init ppc7d_setup_arch(void)
-{
-	int port;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	if ((cur_cpu_spec->cpu_features & CPU_FTR_SPEC7450) ||
-	    (cur_cpu_spec->cpu_features & CPU_FTR_L3CR))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cur_cpu_spec->cpu_features & CPU_FTR_L2CR)
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-			  | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-
-	if (cur_cpu_spec->cpu_features & CPU_FTR_L3CR)
-		/* No L3 cache */
-		_set_L3CR(0);
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	/* Lookup PCI host bridges */
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: calling setup_bridge", 0);
-
-	ppc7d_setup_bridge();
-	ppc7d_setup_peripherals();
-
-	/* Disable ethernet. It might have been setup by the bootrom */
-	for (port = 0; port < 3; port++)
-		mv64x60_write(&bh, MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port),
-			      0x0000ff00);
-
-	/* Clear queue pointers to ensure they are all initialized,
-	 * otherwise since queues 1-7 are unused, they have random
-	 * pointers which look strange in register dumps. Don't bother
-	 * with queue 0 since it will be initialized later.
-	 */
-	for (port = 0; port < 3; port++) {
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port),
-			      0x00000000);
-	}
-
-	printk(KERN_INFO "Radstone Technology PPC7D\n");
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: exit", 0);
-
-}
-
-/* Real Time Clock support.
- * PPC7D has a DS1337 accessed by I2C.
- */
-static ulong ppc7d_get_rtc_time(void)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        result = ds1337_do_command(0, DS1337_GET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        if (result == 0)
-                result = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-        return result;
-}
-
-static int ppc7d_set_rtc_time(unsigned long nowtime)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        to_tm(nowtime, &tm);
-        result = ds1337_do_command(0, DS1337_SET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        return result;
-}
-
-/* This kernel command line parameter can be used to have the target
- * wait for a JTAG debugger to attach. Of course, a JTAG debugger
- * with hardware breakpoint support can have the target stop at any
- * location during init, but this is a convenience feature that makes
- * it easier in the common case of loading the code using the ppcboot
- * bootloader..
- */
-static unsigned long ppc7d_wait_debugger;
-
-static int __init ppc7d_waitdbg(char *str)
-{
-	ppc7d_wait_debugger = 1;
-	return 1;
-}
-
-__setup("waitdbg", ppc7d_waitdbg);
-
-/* Second phase board init, called after other (architecture common)
- * low-level services have been initialized.
- */
-static void ppc7d_init2(void)
-{
-	unsigned long flags;
-	u32 data;
-	u8 data8;
-
-	pr_debug("%s: enter\n", __func__);
-
-	/* Wait for debugger? */
-	if (ppc7d_wait_debugger) {
-		printk("Waiting for debugger...\n");
-
-		while (readl(&ppc7d_wait_debugger)) ;
-	}
-
-	/* Hook up i8259 interrupt which is connected to GPP28 */
-	request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr,
-		    IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0);
-
-	/* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */
-	spin_lock_irqsave(&mv64x60_lock, flags);
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 0);
-	data |= (0x00000004 << 0);
-	data &= ~(0x0000000f << 4);
-	data |= (0x00000004 << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-	spin_unlock_irqrestore(&mv64x60_lock, flags);
-
-	/* All LEDs off */
-	data8 = inb(PPC7D_CPLD_LEDS);
-	data8 &= ~0x08;
-	data8 |= 0x07;
-	outb(data8, PPC7D_CPLD_LEDS);
-
-        /* Hook up RTC. We couldn't do this earlier because we need the I2C subsystem */
-        ppc_md.set_rtc_time = ppc7d_set_rtc_time;
-        ppc_md.get_rtc_time = ppc7d_get_rtc_time;
-
-	pr_debug("%s: exit\n", __func__);
-}
-
-/* Called from machine_init(), early, before any of the __init functions
- * have run. We must init software-configurable pins before other functions
- * such as interrupt controllers are initialised.
- */
-void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7)
-{
-	u8 val8;
-	u8 rev_num;
-
-	/* Map 0xe0000000-0xffffffff early because we need access to SRAM
-	 * and the ISA memory space (for serial port) here. This mapping
-	 * is redone properly in ppc7d_map_io() later.
-	 */
-	mtspr(SPRN_DBAT3U, 0xe0003fff);
-	mtspr(SPRN_DBAT3L, 0xe000002a);
-
-	/*
-	 * Zero SRAM. Note that this generates parity errors on
-	 * internal data path in SRAM if it's first time accessing it
-	 * after reset.
-	 *
-	 * We do this ASAP to avoid parity errors when reading
-	 * uninitialized SRAM.
-	 */
-	memset((void *)PPC7D_INTERNAL_SRAM_BASE, 0, MV64360_SRAM_SIZE);
-
-	pr_debug("platform_init: r3-r7: %lx %lx %lx %lx %lx\n",
-		 r3, r4, r5, r6, r7);
-
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		bd_t *bp = (bd_t *) __res;
-
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-
-		printk(KERN_INFO "Board info data:-\n");
-		printk(KERN_INFO "  Internal freq: %lu MHz, bus freq: %lu MHz\n",
-		       bp->bi_intfreq, bp->bi_busfreq);
-		printk(KERN_INFO "  Memory: %lx, size %lx\n", bp->bi_memstart,
-		       bp->bi_memsize);
-		printk(KERN_INFO "  Console baudrate: %lu\n", bp->bi_baudrate);
-		printk(KERN_INFO "  Ethernet address: "
-		       "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		       bp->bi_enetaddr[0], bp->bi_enetaddr[1],
-		       bp->bi_enetaddr[2], bp->bi_enetaddr[3],
-		       bp->bi_enetaddr[4], bp->bi_enetaddr[5]);
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-		printk(KERN_INFO "INITRD @ %lx/%lx\n", initrd_start, initrd_end);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	isa_io_base = 0xe8000000;
-	isa_mem_base = 0xe8000000;
-	pci_dram_offset = 0x00000000;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-
-	ppc_md.setup_arch = ppc7d_setup_arch;
-	ppc_md.init = ppc7d_init2;
-	ppc_md.show_cpuinfo = ppc7d_show_cpuinfo;
-	/* XXX this is broken... */
-	ppc_md.irq_canonicalize = ppc7d_irq_canonicalize;
-	ppc_md.init_IRQ = ppc7d_init_irq;
-	ppc_md.get_irq = ppc7d_get_irq;
-
-	ppc_md.restart = ppc7d_restart;
-	ppc_md.power_off = ppc7d_power_off;
-	ppc_md.halt = ppc7d_halt;
-
-	ppc_md.find_end_of_memory = ppc7d_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc7d_map_io;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = ppc7d_calibrate_decr;
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = ppc7d_heartbeat;
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-	ppc_md.pcibios_fixup_bus = ppc7d_pci_fixup_bus;
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) || \
-    defined(CONFIG_I2C_MV64XXX)
-	platform_notify = ppc7d_platform_notify;
-#endif
-
-#ifdef CONFIG_SERIAL_MPSC
-	/* On PPC7D, we must configure MPSC support via CPLD control
-	 * registers.
-	 */
-	outb(PPC7D_CPLD_RTS_COM4_SCLK |
-	     PPC7D_CPLD_RTS_COM56_ENABLED, PPC7D_CPLD_RTS);
-	outb(PPC7D_CPLD_COMS_COM3_TCLKEN |
-	     PPC7D_CPLD_COMS_COM3_TXEN |
-	     PPC7D_CPLD_COMS_COM4_TCLKEN |
-	     PPC7D_CPLD_COMS_COM4_TXEN, PPC7D_CPLD_COMS);
-#endif /* CONFIG_SERIAL_MPSC */
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc7d_early_serial_map();
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.progress = mv64x60_mpsc_progress;
-#elif defined(CONFIG_SERIAL_8250)
-	ppc_md.progress = gen550_progress;
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif /* CONFIG_SERIAL_8250 */
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Enable write access to user flash.  This is necessary for
-	 * flash probe.
-	 */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	writeb(val8 | (PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED &
-		       PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK),
-	       (void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-
-	/* Determine if this board has IBM ALMA VME devices */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_BOARD_REVISION);
-	rev_num = (val8 & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	if (rev_num <= 1)
-		ppc7d_has_alma = 1;
-
-#ifdef DEBUG
-	console_printk[0] = 8;
-#endif
-}
diff --git a/arch/ppc/platforms/radstone_ppc7d.h b/arch/ppc/platforms/radstone_ppc7d.h
deleted file mode 100644
index 2bb093a0c03e..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Board definitions for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB
- * and start on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xff000000-0xff000fff	 - AFIX registers (DevCS2)
- *    0xfef00000-0xfef0ffff      - Internal MV64x60 registers
- *    0xfef40000-0xfef7ffff      - Internal SRAM
- *    0xfef00000-0xfef0ffff      - MV64360 Registers
- *    0x70000000-0x7fffffff      - soldered flash (DevCS3)
- *    0xe8000000-0xe9ffffff      - PCI I/O
- *    0x80000000-0xbfffffff      - PCI MEM
- */
-
-#ifndef __PPC_PLATFORMS_PPC7D_H
-#define __PPC_PLATFORMS_PPC7D_H
-
-#include <asm/ppcboot.h>
-
-/*****************************************************************************
- * CPU Physical Memory Map setup.
- *****************************************************************************/
-
-#define PPC7D_BOOT_WINDOW_BASE			0xff800000
-#define PPC7D_AFIX_REG_BASE			0xff000000
-#define PPC7D_INTERNAL_SRAM_BASE		0xfef40000
-#define PPC7D_FLASH_BASE			0x70000000
-
-#define PPC7D_BOOT_WINDOW_SIZE_ACTUAL		0x00800000 /* 8MB */
-#define PPC7D_FLASH_SIZE_ACTUAL			0x10000000 /* 256MB */
-
-#define PPC7D_BOOT_WINDOW_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_BOOT_WINDOW_SIZE_ACTUAL)
-#define PPC7D_FLASH_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_FLASH_SIZE_ACTUAL)
-#define PPC7D_AFIX_REG_SIZE		max(MV64360_WINDOW_SIZE_MIN, 0xff)
-
-
-#define PPC7D_PCI0_MEM0_START_PROC_ADDR        0x80000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_LO_ADDR      0x80000000UL
-#define PPC7D_PCI0_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI0_MEM1_START_PROC_ADDR        0xe8010000UL
-#define PPC7D_PCI0_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_SIZE                   0x000f0000UL
-#define PPC7D_PCI0_IO_START_PROC_ADDR          0xe8000000UL
-#define PPC7D_PCI0_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI0_IO_SIZE                     0x00010000UL
-
-#define PPC7D_PCI1_MEM0_START_PROC_ADDR        0xa0000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_LO_ADDR      0xa0000000UL
-#define PPC7D_PCI1_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI1_MEM1_START_PROC_ADDR        0xe9800000UL
-#define PPC7D_PCI1_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_SIZE                   0x00800000UL
-#define PPC7D_PCI1_IO_START_PROC_ADDR          0xe9000000UL
-#define PPC7D_PCI1_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI1_IO_SIZE                     0x00010000UL
-
-#define	PPC7D_DEFAULT_BAUD			9600
-#define	PPC7D_MPSC_CLK_SRC			8	  /* TCLK */
-#define	PPC7D_MPSC_CLK_FREQ			133333333 /* 133.3333... MHz */
-
-#define	PPC7D_ETH0_PHY_ADDR			8
-#define	PPC7D_ETH1_PHY_ADDR			9
-#define	PPC7D_ETH2_PHY_ADDR			0
-
-#define PPC7D_ETH_TX_QUEUE_SIZE			400
-#define PPC7D_ETH_RX_QUEUE_SIZE			400
-
-#define	PPC7D_ETH_PORT_CONFIG_VALUE			\
-	MV64340_ETH_UNICAST_NORMAL_MODE			|	\
-	MV64340_ETH_DEFAULT_RX_QUEUE_0			|	\
-	MV64340_ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	MV64340_ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	MV64340_ETH_RECEIVE_BC_IF_IP			|	\
-	MV64340_ETH_RECEIVE_BC_IF_ARP			|	\
-	MV64340_ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	MV64340_ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	MV64340_ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	PPC7D_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	MV64340_ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	MV64340_ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	PPC7D_ETH_PORT_SDMA_CONFIG_VALUE		\
-	MV64340_ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	MV64340_ETH_TX_BURST_SIZE_4_64BIT
-
-#define	PPC7D_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	MV64340_ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	MV64340_ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	MV64340_ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	MV64340_ETH_FORCE_BP_MODE_NO_JAM		|	\
-	(1 << 9)					|	\
-	MV64340_ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	MV64340_ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	MV64340_ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	MV64340_ETH_DTE_ADV_0				|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	MV64340_ETH_AUTO_NEG_NO_CHANGE			|	\
-	MV64340_ETH_MAX_RX_PACKET_9700BYTE		|	\
-	MV64340_ETH_CLR_EXT_LOOPBACK			|	\
-	MV64340_ETH_SET_FULL_DUPLEX_MODE		|	\
-	MV64340_ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-/*****************************************************************************
- * Serial defines.
- *****************************************************************************/
-
-#define PPC7D_SERIAL_0		0xe80003f8
-#define PPC7D_SERIAL_1		0xe80002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define UART_CLK			1843200
-#define BASE_BAUD			( UART_CLK / 16 )
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PPC7D_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM, },				  \
-        { 0, BASE_BAUD, PPC7D_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-/*****************************************************************************
- * CPLD defines.
- *
- * Register map:-
- *
- * 0000 to 000F 	South Bridge DMA 1 Control
- * 0020 and 0021 	South Bridge Interrupt 1 Control
- * 0040 to 0043 	South Bridge Counter Control
- * 0060 		Keyboard
- * 0061 		South Bridge NMI Status and Control
- * 0064 		Keyboard
- * 0071 and 0072 	RTC R/W
- * 0078 to 007B 	South Bridge BIOS Timer
- * 0080 to 0090 	South Bridge DMA Pages
- * 00A0 and 00A1 	South Bridge Interrupt 2 Control
- * 00C0 to 00DE 	South Bridge DMA 2 Control
- * 02E8 to 02EF 	COM6 R/W
- * 02F8 to 02FF 	South Bridge COM2 R/W
- * 03E8 to 03EF 	COM5 R/W
- * 03F8 to 03FF 	South Bridge COM1 R/W
- * 040A 		South Bridge DMA Scatter/Gather RO
- * 040B 		DMA 1 Extended Mode WO
- * 0410 to 043F 	South Bridge DMA Scatter/Gather
- * 0481 to 048B 	South Bridge DMA High Pages
- * 04D0 and 04D1 	South Bridge Edge/Level Control
- * 04D6 		DMA 2 Extended Mode WO
- * 0804 		Memory Configuration RO
- * 0806 		Memory Configuration Extend RO
- * 0808 		SCSI Activity LED R/W
- * 080C 		Equipment Present 1 RO
- * 080E 		Equipment Present 2 RO
- * 0810 		Equipment Present 3 RO
- * 0812 		Equipment Present 4 RO
- * 0818 		Key Lock RO
- * 0820 		LEDS R/W
- * 0824 		COMs R/W
- * 0826 		RTS R/W
- * 0828 		Reset R/W
- * 082C 		Watchdog Trig R/W
- * 082E 		Interrupt R/W
- * 0830 		Interrupt Status RO
- * 0832 		PCI configuration RO
- * 0854 		Board Revision RO
- * 0858 		Extended ID RO
- * 0864 		ID Link RO
- * 0866 		Motherboard Type RO
- * 0868 		FLASH Write control RO
- * 086A 		Software FLASH write protect R/W
- * 086E 		FLASH Control R/W
- *****************************************************************************/
-
-#define PPC7D_CPLD_MEM_CONFIG			0x0804
-#define PPC7D_CPLD_MEM_CONFIG_EXTEND		0x0806
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED		0x0808
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_1		0x080C
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_2		0x080E
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_3		0x0810
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_4		0x0812
-#define PPC7D_CPLD_KEY_LOCK			0x0818
-#define PPC7D_CPLD_LEDS				0x0820
-#define PPC7D_CPLD_COMS				0x0824
-#define PPC7D_CPLD_RTS				0x0826
-#define PPC7D_CPLD_RESET			0x0828
-#define PPC7D_CPLD_WATCHDOG_TRIG		0x082C
-#define PPC7D_CPLD_INTR				0x082E
-#define PPC7D_CPLD_INTR_STATUS			0x0830
-#define PPC7D_CPLD_PCI_CONFIG			0x0832
-#define PPC7D_CPLD_BOARD_REVISION		0x0854
-#define PPC7D_CPLD_EXTENDED_ID			0x0858
-#define PPC7D_CPLD_ID_LINK			0x0864
-#define PPC7D_CPLD_MOTHERBOARD_TYPE		0x0866
-#define PPC7D_CPLD_FLASH_WRITE_CNTL		0x0868
-#define PPC7D_CPLD_SW_FLASH_WRITE_PROTECT	0x086A
-#define PPC7D_CPLD_FLASH_CNTL			0x086E
-
-/* MEMORY_CONFIG_EXTEND */
-#define PPC7D_CPLD_SDRAM_BANK_NUM_MASK		0x02
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_MASK		0xc0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_128M		0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_256M		0x40
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_512M		0x80
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_1G		0xc0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_MASK		0x03
-#define PPC7D_CPLD_FLASH_BANK_NUM_MASK		0x0c
-#define PPC7D_CPLD_FLASH_DEV_SIZE_64M		0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_32M		1
-#define PPC7D_CPLD_FLASH_DEV_SIZE_16M		3
-#define PPC7D_CPLD_FLASH_BANK_NUM_4		0x00
-#define PPC7D_CPLD_FLASH_BANK_NUM_3		0x04
-#define PPC7D_CPLD_FLASH_BANK_NUM_2		0x08
-#define PPC7D_CPLD_FLASH_BANK_NUM_1		0x0c
-
-/* SCSI_LED */
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_OFF	0
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_ON		1
-
-/* EQUIPMENT_PRESENT_1 */
-#define PPC7D_CPLD_EQPT_PRES_1_FITTED		0
-#define PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_2 */
-#define PPC7D_CPLD_EQPT_PRES_2_FITTED		!0
-#define PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_EQPT_PRES_2_COM36_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_3 */
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_5V		(0 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_3V		(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK	(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_5V		(0 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_3V		(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_INTER	(0 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_VME	(0x80 >> 5)
-
-/* EQUIPMENT_PRESENT_4 */
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_FITTED	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_USB2_MASK	(0xc0 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED	(0x40 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED	(0x80 >> 6)
-
-/* CPLD_LEDS */
-#define PPC7D_CPLD_LEDS_ON			(!0)
-#define PPC7D_CPLD_LEDS_OFF			(0)
-#define PPC7D_CPLD_LEDS_NVRAM_PAGE_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_LEDS_DS201_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_LEDS_DS219_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_LEDS_DS220_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_LEDS_DS221_MASK		(0x80 >> 7)
-
-/* CPLD_COMS */
-#define PPC7D_CPLD_COMS_COM3_TCLKEN		(0x80 >> 0)
-#define PPC7D_CPLD_COMS_COM3_RTCLKEN		(0x80 >> 1)
-#define PPC7D_CPLD_COMS_COM3_MODE_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS422		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_TXEN		(0x80 >> 3)
-#define PPC7D_CPLD_COMS_COM4_TCLKEN		(0x80 >> 4)
-#define PPC7D_CPLD_COMS_COM4_RTCLKEN		(0x80 >> 5)
-#define PPC7D_CPLD_COMS_COM4_MODE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS422		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_TXEN		(0x80 >> 7)
-
-/* CPLD_RTS */
-#define PPC7D_CPLD_RTS_COM36_LOOPBACK		(0x80 >> 0)
-#define PPC7D_CPLD_RTS_COM4_SCLK		(0x80 >> 1)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_DISABLED	(0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED	(0x80 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3	(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3S (0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM56_MODE_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS232		(0)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS422		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_ENABLE_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM56_DISABLED		(0)
-#define PPC7D_CPLD_RTS_COM56_ENABLED		(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_MASK		(0xc0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_DISABLED	(0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED	(0x80 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3	(0x40 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3S (0x40 >> 6)
-
-/* WATCHDOG_TRIG */
-#define PPC7D_CPLD_WDOG_CAUSE_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_NORMAL_RESET	(0 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_WATCHDOG		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_ENABLE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_OFF		(0 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_ON		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_RESETSW_MASK		(0x80 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_OFF		(0 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_ON		(0x80 >> 7)
-
-/* Interrupt mask and status bits */
-#define PPC7D_CPLD_INTR_TEMP_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_INTR_HB8_MASK		(0x80 >> 1)
-#define PPC7D_CPLD_INTR_PHY1_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_INTR_PHY0_MASK		(0x80 >> 3)
-#define PPC7D_CPLD_INTR_ISANMI_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_INTR_CRITTEMP_MASK		(0x80 >> 6)
-
-/* CPLD_INTR */
-#define PPC7D_CPLD_INTR_ENABLE_OFF		(0)
-#define PPC7D_CPLD_INTR_ENABLE_ON		(!0)
-
-/* CPLD_INTR_STATUS */
-#define PPC7D_CPLD_INTR_STATUS_OFF		(0)
-#define PPC7D_CPLD_INTR_STATUS_ON		(!0)
-
-/* CPLD_PCI_CONFIG */
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_MASK		0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI66	0x10
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX33	0x40
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX66	0x50
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX100      0x60
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX133	0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_MASK		0x07
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI66	0x01
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX33	0x04
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX66	0x05
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX100	0x06
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX133	0x07
-
-/* CPLD_BOARD_REVISION */
-#define PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK	0xe0
-#define PPC7D_CPLD_BOARD_REVISION_LETTER_MASK	0x1f
-
-/* CPLD_EXTENDED_ID */
-#define PPC7D_CPLD_EXTENDED_ID_PPC7D		0x18
-
-/* CPLD_ID_LINK */
-#define PPC7D_CPLD_ID_LINK_VME64_GAP_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_ID_LINK_VME64_GA4_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_ID_LINK_E13_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_ID_LINK_E12_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_ID_LINK_E7_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_ID_LINK_E6_MASK		(0x80 >> 7)
-
-/* CPLD_MOTHERBOARD_TYPE */
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLED		(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_DISABLED		(0 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_MB_TYPE_PLL_MASK		0x0c
-#define PPC7D_CPLD_MB_TYPE_PLL_133		0x00
-#define PPC7D_CPLD_MB_TYPE_PLL_100		0x08
-#define PPC7D_CPLD_MB_TYPE_PLL_64		0x04
-#define PPC7D_CPLD_MB_TYPE_HW_ID_MASK		0x03
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_FITTED	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_FITTED	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_FITTED	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_ENABLED	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_ENABLED	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK	(0x80 >> 7)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_ENABLED	(0x80 >> 7)
-
-/* CPLD_SW_FLASH_WRITE_PROTECT */
-#define PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED	(!0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_DISABLED	(0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK	(0x80 >> 6)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK	(0x80 >> 7)
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_DISABLED	(0 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_ENABLED	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK	(0x80 >> 1)
-#define PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK	(0x80 >> 3)
-
-
-#endif /* __PPC_PLATFORMS_PPC7D_H */
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
deleted file mode 100644
index d687b0f8763b..000000000000
--- a/arch/ppc/platforms/residual.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/*
- * Code to deal with the PReP residual data.
- *
- * Written by: Cort Dougan (cort@cs.nmt.edu)
- * Improved _greatly_ and rewritten by Gabriel Paubert (paubert@iram.es)
- *
- *  This file is based on the following documentation:
- *
- *	IBM Power Personal Systems Architecture
- *	Residual Data
- * 	Document Number: PPS-AR-FW0001
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- */
-
-#include <linux/string.h>
-#include <asm/residual.h>
-#include <asm/pnp.h>
-#include <asm/byteorder.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/ide.h>
-
-
-unsigned char __res[sizeof(RESIDUAL)] = {0,};
-RESIDUAL *res = (RESIDUAL *)&__res;
-
-char * PnP_BASE_TYPES[] __initdata = {
-  "Reserved",
-  "MassStorageDevice",
-  "NetworkInterfaceController",
-  "DisplayController",
-  "MultimediaController",
-  "MemoryController",
-  "BridgeController",
-  "CommunicationsDevice",
-  "SystemPeripheral",
-  "InputDevice",
-  "ServiceProcessor"
-  };
-
-/* Device Sub Type Codes */
-
-unsigned char * PnP_SUB_TYPES[] __initdata = {
-  "\001\000SCSIController",
-  "\001\001IDEController",
-  "\001\002FloppyController",
-  "\001\003IPIController",
-  "\001\200OtherMassStorageController",
-  "\002\000EthernetController",
-  "\002\001TokenRingController",
-  "\002\002FDDIController",
-  "\002\0x80OtherNetworkController",
-  "\003\000VGAController",
-  "\003\001SVGAController",
-  "\003\002XGAController",
-  "\003\200OtherDisplayController",
-  "\004\000VideoController",
-  "\004\001AudioController",
-  "\004\200OtherMultimediaController",
-  "\005\000RAM",
-  "\005\001FLASH",
-  "\005\200OtherMemoryDevice",
-  "\006\000HostProcessorBridge",
-  "\006\001ISABridge",
-  "\006\002EISABridge",
-  "\006\003MicroChannelBridge",
-  "\006\004PCIBridge",
-  "\006\005PCMCIABridge",
-  "\006\006VMEBridge",
-  "\006\200OtherBridgeDevice",
-  "\007\000RS232Device",
-  "\007\001ATCompatibleParallelPort",
-  "\007\200OtherCommunicationsDevice",
-  "\010\000ProgrammableInterruptController",
-  "\010\001DMAController",
-  "\010\002SystemTimer",
-  "\010\003RealTimeClock",
-  "\010\004L2Cache",
-  "\010\005NVRAM",
-  "\010\006PowerManagement",
-  "\010\007CMOS",
-  "\010\010OperatorPanel",
-  "\010\011ServiceProcessorClass1",
-  "\010\012ServiceProcessorClass2",
-  "\010\013ServiceProcessorClass3",
-  "\010\014GraphicAssist",
-  "\010\017SystemPlanar",
-  "\010\200OtherSystemPeripheral",
-  "\011\000KeyboardController",
-  "\011\001Digitizer",
-  "\011\002MouseController",
-  "\011\003TabletController",
-  "\011\0x80OtherInputController",
-  "\012\000GeneralMemoryController",
-  NULL
-};
-
-/* Device Interface Type Codes */
-
-unsigned char * PnP_INTERFACES[] __initdata = {
-  "\000\000\000General",
-  "\001\000\000GeneralSCSI",
-  "\001\001\000GeneralIDE",
-  "\001\001\001ATACompatible",
-
-  "\001\002\000GeneralFloppy",
-  "\001\002\001Compatible765",
-  "\001\002\002NS398_Floppy",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\001\002\003NS26E_Floppy",         /* Ports 26E and 26F                  */
-  "\001\002\004NS15C_Floppy",         /* Ports 15C and 15D                  */
-  "\001\002\005NS2E_Floppy",          /* Ports 2E and 2F                    */
-  "\001\002\006CHRP_Floppy",          /* CHRP Floppy in PR*P system         */
-
-  "\001\003\000GeneralIPI",
-
-  "\002\000\000GeneralEther",
-  "\002\001\000GeneralToken",
-  "\002\002\000GeneralFDDI",
-
-  "\003\000\000GeneralVGA",
-  "\003\001\000GeneralSVGA",
-  "\003\002\000GeneralXGA",
-
-  "\004\000\000GeneralVideo",
-  "\004\001\000GeneralAudio",
-  "\004\001\001CS4232Audio",            /* CS 4232 Plug 'n Play Configured    */
-
-  "\005\000\000GeneralRAM",
-  /* This one is obviously wrong ! */
-  "\005\000\000PCIMemoryController",    /* PCI Config Method                  */
-  "\005\000\001RS6KMemoryController",   /* RS6K Config Method                 */
-  "\005\001\000GeneralFLASH",
-
-  "\006\000\000GeneralHostBridge",
-  "\006\001\000GeneralISABridge",
-  "\006\002\000GeneralEISABridge",
-  "\006\003\000GeneralMCABridge",
-  /* GeneralPCIBridge = 0, */
-  "\006\004\000PCIBridgeDirect",
-  "\006\004\001PCIBridgeIndirect",
-  "\006\004\002PCIBridgeRS6K",
-  "\006\005\000GeneralPCMCIABridge",
-  "\006\006\000GeneralVMEBridge",
-
-  "\007\000\000GeneralRS232",
-  "\007\000\001COMx",
-  "\007\000\002Compatible16450",
-  "\007\000\003Compatible16550",
-  "\007\000\004NS398SerPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\000\005NS26ESerPort",         /* Ports 26E and 26F                  */
-  "\007\000\006NS15CSerPort",         /* Ports 15C and 15D                  */
-  "\007\000\007NS2ESerPort",          /* Ports 2E and 2F                    */
-
-  "\007\001\000GeneralParPort",
-  "\007\001\001LPTx",
-  "\007\001\002NS398ParPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\001\003NS26EParPort",         /* Ports 26E and 26F                  */
-  "\007\001\004NS15CParPort",         /* Ports 15C and 15D                  */
-  "\007\001\005NS2EParPort",          /* Ports 2E and 2F                    */
-
-  "\010\000\000GeneralPIC",
-  "\010\000\001ISA_PIC",
-  "\010\000\002EISA_PIC",
-  "\010\000\003MPIC",
-  "\010\000\004RS6K_PIC",
-
-  "\010\001\000GeneralDMA",
-  "\010\001\001ISA_DMA",
-  "\010\001\002EISA_DMA",
-
-  "\010\002\000GeneralTimer",
-  "\010\002\001ISA_Timer",
-  "\010\002\002EISA_Timer",
-  "\010\003\000GeneralRTC",
-  "\010\003\001ISA_RTC",
-
-  "\010\004\001StoreThruOnly",
-  "\010\004\002StoreInEnabled",
-  "\010\004\003RS6KL2Cache",
-
-  "\010\005\000IndirectNVRAM",        /* Indirectly addressed               */
-  "\010\005\001DirectNVRAM",          /* Memory Mapped                      */
-  "\010\005\002IndirectNVRAM24",      /* Indirectly addressed - 24 bit      */
-
-  "\010\006\000GeneralPowerManagement",
-  "\010\006\001EPOWPowerManagement",
-  "\010\006\002PowerControl",         // d1378
-
-  "\010\007\000GeneralCMOS",
-
-  "\010\010\000GeneralOPPanel",
-  "\010\010\001HarddiskLight",
-  "\010\010\002CDROMLight",
-  "\010\010\003PowerLight",
-  "\010\010\004KeyLock",
-  "\010\010\005ANDisplay",            /* AlphaNumeric Display               */
-  "\010\010\006SystemStatusLED",      /* 3 digit 7 segment LED              */
-  "\010\010\007CHRP_SystemStatusLED", /* CHRP LEDs in PR*P system           */
-
-  "\010\011\000GeneralServiceProcessor",
-  "\010\012\000GeneralServiceProcessor",
-  "\010\013\000GeneralServiceProcessor",
-
-  "\010\014\001TransferData",
-  "\010\014\002IGMC32",
-  "\010\014\003IGMC64",
-
-  "\010\017\000GeneralSystemPlanar",   /* 10/5/95                            */
-  NULL
-  };
-
-static const unsigned char __init *PnP_SUB_TYPE_STR(unsigned char BaseType,
-					     unsigned char SubType) {
-	unsigned char ** s=PnP_SUB_TYPES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType)) s++;
-	if (*s) return *s+2;
-	else return("Unknown !");
-};
-
-static const unsigned char __init *PnP_INTERFACE_STR(unsigned char BaseType,
-					      unsigned char SubType,
-					      unsigned char Interface) {
-	unsigned char ** s=PnP_INTERFACES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType
-		       && (*s)[2]==Interface)) s++;
-	if (*s) return *s+3;
-	else return NULL;
-};
-
-static void __init printsmallvendor(PnP_TAG_PACKET *pkt, int size) {
-	int i, c;
-	char decomp[4];
-#define p pkt->S14_Pack.S14_Data.S14_PPCPack
-	switch(p.Type) {
-	case 1:
-	  /* Decompress first 3 chars */
-	  c = *(unsigned short *)p.PPCData;
-	  decomp[0]='A'-1+((c>>10)&0x1F);
-	  decomp[1]='A'-1+((c>>5)&0x1F);
-	  decomp[2]='A'-1+(c&0x1F);
-	  decomp[3]=0;
-	  printk("    Chip identification: %s%4.4X\n",
-		 decomp, ld_le16((unsigned short *)(p.PPCData+2)));
-	  break;
-	default:
-	  printk("    Small vendor item type 0x%2.2x, data (hex): ",
-		 p.Type);
-	  for(i=0; i<size-2; i++) printk("%2.2x ", p.PPCData[i]);
-	  printk("\n");
-	  break;
-	}
-#undef p
-}
-
-static void __init printsmallpacket(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * intlevel[] = {"high", "low"};
-	static const unsigned char * intsense[] = {"edge", "level"};
-
-	switch (tag_small_item_name(pkt->S1_Pack.Tag)) {
-	case PnPVersion:
-	  printk("    PnPversion 0x%x.%x\n",
-		 pkt->S1_Pack.Version[0], /* How to interpret version ? */
-		 pkt->S1_Pack.Version[1]);
-	  break;
-//	case Logicaldevice:
-	  break;
-//	case CompatibleDevice:
-	  break;
-	case IRQFormat:
-#define p pkt->S4_Pack
-	  printk("    IRQ Mask 0x%4.4x, %s %s sensitive\n",
-		 ld_le16((unsigned short *)p.IRQMask),
-		 intlevel[(size>3) ? !(p.IRQInfo&0x05) : 0],
-		 intsense[(size>3) ? !(p.IRQInfo&0x03) : 0]);
-#undef p
-	  break;
-	case DMAFormat:
-#define p pkt->S5_Pack
-	  printk("    DMA channel mask 0x%2.2x, info 0x%2.2x\n",
-		 p.DMAMask, p.DMAInfo);
-#undef p
-	  break;
-	case StartDepFunc:
-	  printk("Start dependent function:\n");
-	  break;
-	case EndDepFunc:
-	  printk("End dependent function\n");
-	  break;
-	case IOPort:
-#define p pkt->S8_Pack
-	  printk("    Variable (%d decoded bits) I/O port\n"
-		 "      from 0x%4.4x to 0x%4.4x, alignment %d, %d ports\n",
-		 p.IOInfo&ISAAddr16bit?16:10,
-		 ld_le16((unsigned short *)p.RangeMin),
- 		 ld_le16((unsigned short *)p.RangeMax),
-		 p.IOAlign, p.IONum);
-#undef p
-	  break;
-	case FixedIOPort:
-#define p pkt->S9_Pack
-	  printk("    Fixed (10 decoded bits) I/O port from %3.3x to %3.3x\n",
-		 (p.Range[1]<<8)|p.Range[0],
-		 ((p.Range[1]<<8)|p.Range[0])+p.IONum-1);
-#undef p
-	  break;
-	case Res1:
-	case Res2:
-	case Res3:
-	  printk("    Undefined packet type %d!\n",
-		 tag_small_item_name(pkt->S1_Pack.Tag));
-	  break;
-	case SmallVendorItem:
-	  printsmallvendor(pkt,size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printlargevendor(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * addrtype[] = {"I/O", "Memory", "System"};
-	static const unsigned char * inttype[] = {"8259", "MPIC", "RS6k BUID %d"};
-	static const unsigned char * convtype[] = {"Bus Memory", "Bus I/O", "DMA"};
-	static const unsigned char * transtype[] = {"direct", "mapped", "direct-store segment"};
-	static const unsigned char * L2type[] = {"WriteThru", "CopyBack"};
-	static const unsigned char * L2assoc[] = {"DirectMapped", "2-way set"};
-
-	int i;
-	char tmpstr[30], *t;
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	switch(p.Type) {
-	case 2:
-	  printk("    %d K %s %s L2 cache, %d/%d bytes line/sector size\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 L2type[p.PPCData[10]-1],
-		 L2assoc[p.PPCData[4]-1],
-		 ld_le16((unsigned short *)p.PPCData+3),
-		 ld_le16((unsigned short *)p.PPCData+4));
-	  break;
-	case 3:
-	  printk("    PCI Bridge parameters\n"
-		 "      ConfigBaseAddress %0x\n"
-		 "      ConfigBaseData %0x\n"
-		 "      Bus number %d\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 ld_le32((unsigned int *)(p.PPCData+8)),
-		 p.PPCData[16]);
-	  for(i=20; i<size-4; i+=12) {
-	  	int j, first;
-	  	if(p.PPCData[i]) printk("      PCI Slot %d", p.PPCData[i]);
-		else printk ("      Integrated PCI device");
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-			        if(first) first=0; else *t++='/';
-				*t++='A'+j;
-			}
-		}
-		*t='\0';
-		printk(" DevFunc 0x%x interrupt line(s) %s routed to",
-		       p.PPCData[i+1],tmpstr);
-		sprintf(tmpstr,
-			inttype[p.PPCData[i+2]-1],
-			p.PPCData[i+3]);
-		printk(" %s line(s) ",
-		       tmpstr);
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-				if(first) first=0; else *t++='/';
-				t+=sprintf(t,"%d(%c)",
-					   line&0x7fff,
-					   line&0x8000?'E':'L');
-			}
-		}
-		printk("%s\n",tmpstr);
-	  }
-	  break;
-	case 5:
-	  printk("    Bridge address translation, %s decoding:\n"
-		 "      Processor  Bus        Size       Conversion Translation\n"
-		 "      0x%8.8x 0x%8.8x 0x%8.8x %s %s\n",
-		 p.PPCData[0]&1 ? "positive" : "subtractive",
-		 ld_le32((unsigned int *)p.PPCData+1),
-		 ld_le32((unsigned int *)p.PPCData+3),
-		 ld_le32((unsigned int *)p.PPCData+5),
-		 convtype[p.PPCData[2]-1],
-		 transtype[p.PPCData[1]-1]);
-	  break;
-	case 6:
-	  printk("    Bus speed %d Hz, %d slot(s)\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 p.PPCData[4]);
-	  break;
-	case 7:
-	  printk("    SCSI buses: %d, id(s):", p.PPCData[0]);
-	  for(i=1; i<=p.PPCData[0]; i++)
-	    printk(" %d%c", p.PPCData[i], i==p.PPCData[0] ? '\n' : ',');
-	  break;
-	case 9:
-	  printk("    %s address (%d bits), at 0x%x size 0x%x bytes\n",
-		 addrtype[p.PPCData[0]-1],
-		 p.PPCData[1],
-		 ld_le32((unsigned int *)(p.PPCData+4)),
-		 ld_le32((unsigned int *)(p.PPCData+12)));
-	  break;
-	case 10:
-	  sprintf(tmpstr,
-		  inttype[p.PPCData[0]-1],
-		  p.PPCData[1]);
-
-	  printk("    ISA interrupts routed to %s\n"
-		 "      lines",
-		 tmpstr);
-	  for(i=0; i<16; i++) {
-	  	int line=ld_le16((unsigned short *)p.PPCData+i+1);
-		if (line!=0xffff) printk(" %d(IRQ%d)", line, i);
-	  }
-	  printk("\n");
-	  break;
-	default:
-	  printk("    Large vendor item type 0x%2.2x\n      Data (hex):",
-		 p.Type);
-	  for(i=0; i<size-4; i++) printk(" %2.2x", p.PPCData[i]);
-	  printk("\n");
-#undef p
-	}
-}
-
-static void __init printlargepacket(PnP_TAG_PACKET * pkt, int size) {
-	switch (tag_large_item_name(pkt->S1_Pack.Tag)) {
-	case LargeVendorItem:
-	  printlargevendor(pkt, size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printpackets(PnP_TAG_PACKET * pkt, const char * cat)
-{
-	if (pkt->S1_Pack.Tag== END_TAG) {
-		printk("  No packets describing %s resources.\n", cat);
-		return;
-	}
-	printk(  "  Packets describing %s resources:\n",cat);
-	do {
-		int size;
-		if (tag_type(pkt->S1_Pack.Tag)) {
-		  	size= 3 +
-			  pkt->L1_Pack.Count0 +
-			  pkt->L1_Pack.Count1*256;
-			printlargepacket(pkt, size);
-		} else {
-			size=tag_small_count(pkt->S1_Pack.Tag)+1;
-			printsmallpacket(pkt, size);
-		}
-		pkt = (PnP_TAG_PACKET *)((unsigned char *) pkt + size);
-	} while (pkt->S1_Pack.Tag != END_TAG);
-}
-
-void __init print_residual_device_info(void)
-{
-	int i;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-	  	char decomp[4], sn[20];
-		const char * s;
-		dev = &res->Devices[i];
-		s = PnP_INTERFACE_STR(did.BaseType, did.SubType,
-				      did.Interface);
-		if(!s) {
-			sprintf(sn, "interface %d", did.Interface);
-			s=sn;
-		}
-		if ( did.BusId & PCIDEVICE )
-		  printk("PCI Device, Bus %d, DevFunc 0x%x:",
-			 dev->BusAccess.PCIAccess.BusNumber,
-			 dev->BusAccess.PCIAccess.DevFuncNumber);
-	       	if ( did.BusId & PNPISADEVICE ) printk("PNPISA Device:");
-		if ( did.BusId & ISADEVICE )
-		  printk("ISA Device, Slot %d, LogicalDev %d:",
-			 dev->BusAccess.ISAAccess.SlotNumber,
-			 dev->BusAccess.ISAAccess.LogicalDevNumber);
-		if ( did.BusId & EISADEVICE ) printk("EISA Device:");
-		if ( did.BusId & PROCESSORDEVICE )
-		  printk("ProcBus Device, Bus %d, BUID %d: ",
-			 dev->BusAccess.ProcBusAccess.BusNumber,
-			 dev->BusAccess.ProcBusAccess.BUID);
-		if ( did.BusId & PCMCIADEVICE ) printk("PCMCIA ");
-		if ( did.BusId & VMEDEVICE ) printk("VME ");
-		if ( did.BusId & MCADEVICE ) printk("MCA ");
-		if ( did.BusId & MXDEVICE ) printk("MX ");
-		/* Decompress first 3 chars */
-		decomp[0]='A'-1+((did.DevId>>26)&0x1F);
-		decomp[1]='A'-1+((did.DevId>>21)&0x1F);
-		decomp[2]='A'-1+((did.DevId>>16)&0x1F);
-		decomp[3]=0;
-		printk(" %s%4.4lX, %s, %s, %s\n",
-		       decomp, did.DevId&0xffff,
-		       PnP_BASE_TYPES[did.BaseType],
-		       PnP_SUB_TYPE_STR(did.BaseType,did.SubType),
-		       s);
-		if ( dev->AllocatedOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->AllocatedOffset],
-				      "allocated");
-		if ( dev->PossibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->PossibleOffset],
-				      "possible");
-		if ( dev->CompatibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->CompatibleOffset],
-				      "compatible");
-	}
-}
-
-
-#if 0
-static void __init printVPD(void) {
-#define vpd res->VitalProductData
-	int ps=vpd.PageSize, i, j;
-	static const char* Usage[]={
-	  "FirmwareStack",  "FirmwareHeap",  "FirmwareCode", "BootImage",
-	  "Free", "Unpopulated", "ISAAddr", "PCIConfig",
-	  "IOMemory", "SystemIO", "SystemRegs", "PCIAddr",
-	  "UnPopSystemRom", "SystemROM", "ResumeBlock", "Other"
-	};
-	static const unsigned char *FWMan[]={
-	  "IBM", "Motorola", "FirmWorks", "Bull"
-	};
-	static const unsigned char *FWFlags[]={
-	  "Conventional", "OpenFirmware", "Diagnostics", "LowDebug",
-	  "MultiBoot", "LowClient", "Hex41", "FAT",
-	  "ISO9660", "SCSI_ID_Override", "Tape_Boot", "FW_Boot_Path"
-	};
-	static const unsigned char *ESM[]={
-	  "Port92", "PCIConfigA8", "FF001030", "????????"
-	};
-	static const unsigned char *SIOM[]={
-	  "Port850", "????????", "PCIConfigA8", "????????"
-	};
-
-	printk("Model: %s\n",vpd.PrintableModel);
-	printk("Serial: %s\n", vpd.Serial);
-	printk("FirmwareSupplier: %s\n", FWMan[vpd.FirmwareSupplier]);
-	printk("FirmwareFlags:");
-	for(j=0; j<12; j++) {
-	  	if (vpd.FirmwareSupports & (1<<j)) {
-			printk(" %s%c", FWFlags[j],
-			       vpd.FirmwareSupports&(-2<<j) ? ',' : '\n');
-		}
-	}
-	printk("NVRamSize: %ld\n", vpd.NvramSize);
-	printk("SIMMslots: %ld\n", vpd.NumSIMMSlots);
-	printk("EndianSwitchMethod: %s\n",
-	       ESM[vpd.EndianSwitchMethod>2 ? 2 : vpd.EndianSwitchMethod]);
-	printk("SpreadIOMethod: %s\n",
-	       SIOM[vpd.SpreadIOMethod>3 ? 3 : vpd.SpreadIOMethod]);
-	printk("Processor/Bus frequencies (Hz): %ld/%ld\n",
-	       vpd.ProcessorHz, vpd.ProcessorBusHz);
-	printk("Time Base Divisor: %ld\n", vpd.TimeBaseDivisor);
-	printk("WordWidth, PageSize: %ld, %d\n", vpd.WordWidth, ps);
-	printk("Cache sector size, Lock granularity: %ld, %ld\n",
-	       vpd.CoherenceBlockSize, vpd.GranuleSize);
-	for (i=0; i<res->ActualNumMemSegs; i++) {
-		int mask=res->Segs[i].Usage, first, j;
-		printk("%8.8lx-%8.8lx ",
-		       res->Segs[i].BasePage*ps,
-		       (res->Segs[i].PageCount+res->Segs[i].BasePage)*ps-1);
-		for(j=15, first=1; j>=0; j--) {
-			if (mask&(1<<j)) {
-				if (first) first=0;
-				else printk(", ");
-				printk("%s", Usage[j]);
-			}
-		}
-		printk("\n");
-	}
-}
-
-/*
- * Spit out some info about residual data
- */
-void print_residual_device_info(void)
-{
-	int i;
-	union _PnP_TAG_PACKET *pkt;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-		dev = &res->Devices[i];
-		/*
-		 * pci devices
-		 */
-		if ( did.BusId & PCIDEVICE )
-		{
-			printk("PCI Device:");
-			/* unknown vendor */
-			if ( !strncmp( "Unknown", pci_strvendor(did.DevId>>16), 7) )
-				printk(" id %08lx types %d/%d", did.DevId,
-				       did.BaseType, did.SubType);
-			/* known vendor */
-			else
-				printk(" %s %s",
-				       pci_strvendor(did.DevId>>16),
-				       pci_strdev(did.DevId>>16,
-						  did.DevId&0xffff)
-					);
-
-			if ( did.BusId & PNPISADEVICE )
-			{
-				printk(" pnp:");
-				/* get pnp info on the device */
-				pkt = (union _PnP_TAG_PACKET *)
-					&res->DevicePnPHeap[dev->AllocatedOffset];
-				for (; pkt->S1_Pack.Tag != DF_END_TAG;
-				     pkt++ )
-				{
-					if ( (pkt->S1_Pack.Tag == S4_Packet) ||
-					     (pkt->S1_Pack.Tag == S4_Packet_flags) )
-						printk(" irq %02x%02x",
-						       pkt->S4_Pack.IRQMask[0],
-						       pkt->S4_Pack.IRQMask[1]);
-				}
-			}
-			printk("\n");
-			continue;
-		}
-		/*
-		 * isa devices
-		 */
-		if ( did.BusId & ISADEVICE )
-		{
-			printk("ISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * eisa devices
-		 */
-		if ( did.BusId & EISADEVICE )
-		{
-			printk("EISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * proc bus devices
-		 */
-		if ( did.BusId & PROCESSORDEVICE )
-		{
-			printk("ProcBus Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * pcmcia devices
-		 */
-		if ( did.BusId & PCMCIADEVICE )
-		{
-			printk("PCMCIA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		printk("Unknown bus access device: busid %lx\n",
-		       did.BusId);
-	}
-}
-#endif
-
-/* Returns the device index in the residual data,
-   any of the search items may be set as -1 for wildcard,
-   DevID number field (second halfword) is big endian !
-
-   Examples:
-   - search for the Interrupt controller (8259 type), 2 methods:
-     1) i8259 = residual_find_device(~0,
-                                     NULL,
-				     SystemPeripheral,
-				     ProgrammableInterruptController,
-				     ISA_PIC,
-				     0);
-     2) i8259 = residual_find_device(~0, "PNP0000", -1, -1, -1, 0)
-
-   - search for the first two serial devices, whatever their type)
-     iserial1 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 0)
-     iserial2 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 1)
-   - but search for typical COM1 and COM2 is not easy due to the
-     fact that the interface may be anything and the name "PNP0500" or
-     "PNP0501". Quite bad.
-
-*/
-
-/* devid are easier to uncompress than to compress, so to minimize bloat
-in this rarely used area we unencode and compare */
-
-/* in residual data number is big endian in the device table and
-little endian in the heap, so we use two parameters to avoid writing
-two very similar functions */
-
-static int __init same_DevID(unsigned short vendor,
-	       unsigned short Number,
-	       char * str)
-{
-	static unsigned const char hexdigit[]="0123456789ABCDEF";
-	if (strlen(str)!=7) return 0;
-	if ( ( ((vendor>>10)&0x1f)+'A'-1 == str[0])  &&
-	     ( ((vendor>>5)&0x1f)+'A'-1 == str[1])   &&
-	     ( (vendor&0x1f)+'A'-1 == str[2])        &&
-	     (hexdigit[(Number>>12)&0x0f] == str[3]) &&
-	     (hexdigit[(Number>>8)&0x0f] == str[4])  &&
-	     (hexdigit[(Number>>4)&0x0f] == str[5])  &&
-	     (hexdigit[Number&0x0f] == str[6]) ) return 1;
-	return 0;
-}
-
-PPC_DEVICE __init *residual_find_device(unsigned long BusMask,
-			 unsigned char * DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==NULL || same_DevID((Dev.DevId>>16)&0xffff,
-						Dev.DevId&0xffff, DevID)) &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-PPC_DEVICE __init *residual_find_device_id(unsigned long BusMask,
-			 unsigned short DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==0xffff || (Dev.DevId&0xffff) == DevID)	  &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-static int __init
-residual_scan_pcibridge(PnP_TAG_PACKET * pkt, struct pci_dev *dev)
-{
-	int irq = -1;
-
-#define data pkt->L4_Pack.L4_Data.L4_PPCPack.PPCData
-	if (dev->bus->number == data[16]) {
-		int i, size;
-
-		size = 3 + ld_le16((u_short *) (&pkt->L4_Pack.Count0));
-		for (i = 20; i < size - 4; i += 12) {
-			unsigned char pin;
-			int line_irq;
-
-			if (dev->devfn != data[i + 1])
-				continue;
-
-			pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-			if (pin) {
-				line_irq = ld_le16((unsigned short *)
-						(&data[i + 4 + 2 * (pin - 1)]));
-				irq = (line_irq == 0xffff) ? 0
-							   : line_irq & 0x7fff;
-			} else
-				irq = 0;
-
-			break;
-		}
-	}
-#undef data
-
-	return irq;
-}
-
-int __init
-residual_pcidev_irq(struct pci_dev *dev)
-{
-	int i = 0;
-	int irq = -1;
-	PPC_DEVICE *bridge;
-
-	while ((bridge = residual_find_device
-	       (-1, NULL, BridgeController, PCIBridge, -1, i++))) {
-
-		PnP_TAG_PACKET *pkt;
-		if (bridge->AllocatedOffset) {
-			pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-					   bridge->AllocatedOffset, 3, 0);
-			if (!pkt)
-				continue;
-
-			irq = residual_scan_pcibridge(pkt, dev);
-			if (irq != -1)
-				break;
-		}
-	}
-
-	return (irq < 0) ? 0 : irq;
-}
-
-void __init residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	PPC_DEVICE *dev;
-	int i = 0;
-	unsigned short irq_mask = 0x000; /* default to edge */
-
-	while ((dev = residual_find_device(-1, NULL, -1, -1, -1, i++))) {
-		PnP_TAG_PACKET *pkt;
-		unsigned short mask;
-		int size;
-		int offset = dev->AllocatedOffset;
-
-		if (!offset)
-			continue;
-
-		pkt = PnP_find_packet(res->DevicePnPHeap + offset,
-					      IRQFormat, 0);
-		if (!pkt)
-			continue;
-
-		size = tag_small_count(pkt->S1_Pack.Tag) + 1;
-		mask = ld_le16((unsigned short *)pkt->S4_Pack.IRQMask);
-		if (size > 3 && (pkt->S4_Pack.IRQInfo & 0x0c))
-			irq_mask |= mask;
-	}
-
-	*irq_edge_mask_lo = irq_mask & 0xff;
-	*irq_edge_mask_hi = irq_mask >> 8;
-}
-
-unsigned int __init residual_isapic_addr(void)
-{
-	PPC_DEVICE *isapic;
-	PnP_TAG_PACKET *pkt;
-	unsigned int addr;
-
-	isapic = residual_find_device(~0, NULL, SystemPeripheral,
-				      ProgrammableInterruptController,
-				      ISA_PIC, 0);
-	if (!isapic)
-		goto unknown;
-
-	pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-						isapic->AllocatedOffset, 9, 0);
-	if (!pkt)
-		goto unknown;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	/* Must be 32-bit system address */
-	if (!((p.PPCData[0] == 3) && (p.PPCData[1] == 32)))
-		goto unknown;
-
-	/* It doesn't seem to work where length != 1 (what can I say? :-/ ) */
-	if (ld_le32((unsigned int *)(p.PPCData + 12)) != 1)
-		goto unknown;
-
-	addr = ld_le32((unsigned int *) (p.PPCData + 4));
-#undef p
-	return addr;
-unknown:
-	return 0;
-}
-
-PnP_TAG_PACKET *PnP_find_packet(unsigned char *p,
-				unsigned packet_tag,
-				int n)
-{
-	unsigned mask, masked_tag, size;
-	if(!p) return NULL;
-	if (tag_type(packet_tag)) mask=0xff; else mask=0xF8;
-	masked_tag = packet_tag&mask;
-	for(; *p != END_TAG; p+=size) {
-		if ((*p & mask) == masked_tag && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		if (tag_type(*p))
-			size=ld_le16((unsigned short *)(p+1))+3;
-		else
-			size=tag_small_count(*p)+1;
-	}
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_small_vendor_packet(unsigned char *p,
-					     unsigned packet_type,
-					     int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x70, next);
-		if (p && p[1]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_large_vendor_packet(unsigned char *p,
-					   unsigned packet_type,
-					   int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x84, next);
-		if (p && p[3]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-#ifdef CONFIG_PROC_PREPRESIDUAL
-static int proc_prep_residual_read(char * buf, char ** start, off_t off,
-		int count, int *eof, void *data)
-{
-	int n;
-
-	n = res->ResidualLength - off;
-	if (n < 0) {
-		*eof = 1;
-		n = 0;
-	}
-	else {
-		if (n > count)
-			n = count;
-		else
-			*eof = 1;
-
-		memcpy(buf, (char *)res + off, n);
-		*start = buf;
-	}
-
-	return n;
-}
-
-int __init
-proc_prep_residual_init(void)
-{
-	if (have_residual_data)
-		create_proc_read_entry("residual", S_IRUGO, NULL,
-					proc_prep_residual_read, NULL);
-	return 0;
-}
-
-__initcall(proc_prep_residual_init);
-#endif
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h
deleted file mode 100644
index 843494a50ef3..000000000000
--- a/arch/ppc/platforms/rpx8260.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Embedded Planet RPX6 (or RPX Super) MPC8260 board.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek <dan@embeddededge.com>
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PLATFORMS_RPX8260_H__
-#define __ASM_PLATFORMS_RPX8260_H__
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_nvsize;	/* NVRAM size in bytes (can be 0) */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define RPX_CSR_ADDR		((uint)0xfa000000)
-#define RPX_CSR_SIZE		((uint)(512 * 1024))
-#define RPX_NVRTC_ADDR		((uint)0xfa080000)
-#define RPX_NVRTC_SIZE		((uint)(512 * 1024))
-
-/* The RPX6 has 16, byte wide control/status registers.
- * Not all are used (yet).
- */
-extern volatile u_char *rpx6_csr_addr;
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ID_MASK		((u_char)0xf0)		/* Read only */
-#define BCSR0_SWITCH_MASK	((u_char)0x0f)		/* Read only */
-#define BCSR1_XCVR_SMC1		((u_char)0x80)
-#define BCSR1_XCVR_SMC2		((u_char)0x40)
-#define BCSR2_FLASH_WENABLE	((u_char)0x20)
-#define BCSR2_NVRAM_ENABLE	((u_char)0x10)
-#define BCSR2_ALT_IRQ2		((u_char)0x08)
-#define BCSR2_ALT_IRQ3		((u_char)0x04)
-#define BCSR2_PRST		((u_char)0x02)		/* Force reset */
-#define BCSR2_ENPRST		((u_char)0x01)		/* Enable POR */
-#define BCSR3_MODCLK_MASK	((u_char)0xe0)
-#define BCSR3_ENCLKHDR		((u_char)0x10)
-#define BCSR3_LED5		((u_char)0x04)		/* 0 == on */
-#define BCSR3_LED6		((u_char)0x02)		/* 0 == on */
-#define BCSR3_LED7		((u_char)0x01)		/* 0 == on */
-#define BCSR4_EN_PHY		((u_char)0x80)		/* Enable PHY */
-#define BCSR4_EN_MII		((u_char)0x40)		/* Enable PHY */
-#define BCSR4_MII_READ		((u_char)0x04)
-#define BCSR4_MII_MDC		((u_char)0x02)
-#define BCSR4_MII_MDIO		((u_char)0x01)
-#define BCSR13_FETH_IRQMASK	((u_char)0xf0)
-#define BCSR15_FETH_IRQ		((u_char)0x20)
-
-#define PHY_INTERRUPT	SIU_INT_IRQ7
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Embedded Planet"
-#define CPUINFO_MACHINE		"EP8260 PowerPC"
-
-/* Warm reset vector. */
-#define BOOTROM_RESTART_ADDR	((uint)0xfff00104)
-
-#endif /* __ASM_PLATFORMS_RPX8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
deleted file mode 100644
index a3c1118e5b09..000000000000
--- a/arch/ppc/platforms/rpxclassic.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0x80000000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xe4000000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_ENFLSHSEL		((uint)0x04000000)
-#define BCSR0_FLASH_SEL		((uint)0x02000000)
-#define BCSR0_ENMONXCVR		((uint)0x01000000)
-
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)	/* CLLF */
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)	/* CLLF */
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)	/* CLLF */
-
-#define BCSR1_IPB5SEL           ((uint)0x00100000)
-#define BCSR1_PCVCTL4           ((uint)0x00080000)
-#define BCSR1_PCVCTL5           ((uint)0x00040000)
-#define BCSR1_PCVCTL6           ((uint)0x00020000)
-#define BCSR1_PCVCTL7           ((uint)0x00010000)
-
-#define BCSR2_EN232XCVR		((uint)0x00008000)
-#define BCSR2_QSPACESEL		((uint)0x00004000)
-#define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
-
-/* define IO_BASE for pcmcia, CLLF only */
-#if !defined(CONFIG_PCI)
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-/* for pcmcia sandisk */
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-#endif
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* We don't use the 8259.
-*/
-
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h
deleted file mode 100644
index b615501d55fc..000000000000
--- a/arch/ppc/platforms/rpxlite.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Lite board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0x04400000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_LEDOFF		((uint)0x08000000)
-#define BCSR0_USBDISABLE	((uint)0x04000000)
-#define BCSR0_USBHISPEED	((uint)0x02000000)
-#define BCSR0_USBPWREN		((uint)0x01000000)
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)
-
-#define BCSR1_IPB5SEL          ((uint)0x00100000)
-#define BCSR1_PCVCTL4          ((uint)0x00080000)
-#define BCSR1_PCVCTL5          ((uint)0x00040000)
-#define BCSR1_PCVCTL6          ((uint)0x00020000)
-#define BCSR1_PCVCTL7          ((uint)0x00010000)
-
-/* define IO_BASE for pcmcia */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-
-/* CPM Ethernet through SCCx.
- *
- * This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
deleted file mode 100644
index b4897bdb742a..000000000000
--- a/arch/ppc/platforms/sandpoint.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/*
- * Board setup routines for the Motorola SPS Sandpoint Test Platform.
- *
- * Author: Mark A. Greer
- *	 mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file adds support for the Motorola SPS Sandpoint Test Platform.
- * These boards have a PPMC slot for the processor so any combination
- * of cpu and host bridge can be attached.  This port is for an 8240 PPMC
- * module from Motorola SPS and other closely related cpu/host bridge
- * combinations (e.g., 750/755/7400 with MPC107 host bridge).
- * The sandpoint itself has a Windbond 83c553 (PCI-ISA bridge, 2 DMA ctlrs, 2
- * cascaded 8259 interrupt ctlrs, 8254 Timer/Counter, and an IDE ctlr), a
- * National 87308 (RTC, 2 UARTs, Keyboard & mouse ctlrs, and a floppy ctlr),
- * and 4 PCI slots (only 2 of which are usable; the other 2 are keyed for 3.3V
- * but are really 5V).
- *
- * The firmware on the sandpoint is called DINK (not my acronym :).  This port
- * depends on DINK to do some basic initialization (e.g., initialize the memory
- * ctlr) and to ensure that the processor is using MAP B (CHRP map).
- *
- * The switch settings for the Sandpoint board MUST be as follows:
- * 	S3: down
- * 	S4: up
- * 	S5: up
- * 	S6: down
- *
- * 'down' is in the direction from the PCI slots towards the PPMC slot;
- * 'up' is in the direction from the PPMC slot towards the PCI slots.
- * Be careful, the way the sandpoint board is installed in XT chasses will
- * make the directions reversed.
- *
- * Since Motorola listened to our suggestions for improvement, we now have
- * the Sandpoint X3 board.  All of the PCI slots are available, it uses
- * the serial interrupt interface (just a hardware thing we need to
- * configure properly).
- *
- * Use the default X3 switch settings.  The interrupts are then:
- *		EPIC	Source
- *		  0	SIOINT 		(8259, active low)
- *		  1	PCI #1
- *		  2	PCI #2
- *		  3	PCI #3
- *		  4	PCI #4
- *		  7	Winbond INTC	(IDE interrupt)
- *		  8	Winbond INTD	(IDE interrupt)
- *
- *
- * Motorola has finally released a version of DINK32 that correctly
- * (seemingly) initializes the memory controller correctly, regardless
- * of the amount of memory in the system.  Once a method of determining
- * what version of DINK initializes the system for us, if applicable, is
- * found, we can hopefully stop hardcoding 32MB of RAM.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-
-#include "sandpoint.h"
-
-/* Set non-zero if an X2 Sandpoint detected. */
-static int sandpoint_is_x2;
-
-unsigned char __res[sizeof(bd_t)];
-
-static void sandpoint_halt(void);
-static void sandpoint_probe_type(void);
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * Sandpoint X3 User's manual.
- */
-static u_char sandpoint_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 0: SIOINT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 2: PCI Slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 3: PCI Slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 4: PCI Slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 5: PCI Slot 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 8: IDE (INT C) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* 9: IDE (INT D) */
-};
-
-/*
- * Motorola SPS Sandpoint interrupt routing.
- */
-static inline int
-x3_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 16,  0,  0,  0 },	/* IDSEL 11 - i8259 on Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 18, 21, 20, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 19, 18, 21, 20 },	/* IDSEL 14 - PCI slot 2 */
-		{ 20, 19, 18, 21 },	/* IDSEL 15 - PCI slot 3 */
-		{ 21, 20, 19, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-x2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 18,  0,  0,  0 },	/* IDSEL 11 - i8259 on Windbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 16, 17, 18, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 17, 18, 19, 16 },	/* IDSEL 14 - PCI slot 2 */
-		{ 18, 19, 16, 17 },	/* IDSEL 15 - PCI slot 3 */
-		{ 19, 16, 17, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-sandpoint_setup_winbond_83553(struct pci_controller *hose)
-{
-	int		devfn;
-
-	/*
-	 * Route IDE interrupts directly to the 8259's IRQ 14 & 15.
-	 * We can't route the IDE interrupt to PCI INTC# or INTD# because those
-	 * woule interfere with the PMC's INTC# and INTD# lines.
-	 */
-	/*
-	 * Winbond Fcn 0
-	 */
-	devfn = PCI_DEVFN(11,0);
-
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x43, /* IDE Interrupt Routing Control */
-				0xef);
-	early_write_config_word(hose,
-				0,
-				devfn,
-				0x44, /* PCI Interrupt Routing Control */
-				0x0000);
-
-	/* Want ISA memory cycles to be forwarded to PCI bus */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x48, /* ISA-to-PCI Addr Decoder Control */
-				0xf0);
-
-	/* Enable Port 92.  */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x4e,	/* AT System Control Register */
-				0x06);
-	/*
-	 * Winbond Fcn 1
-	 */
-	devfn = PCI_DEVFN(11,1);
-
-	/* Put IDE controller into native mode. */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x09,	/* Programming interface Register */
-				0x8f);
-
-	/* Init IRQ routing, enable both ports, disable fast 16 */
-	early_write_config_dword(hose,
-				0,
-				devfn,
-				0x40,	/* IDE Control/Status Register */
-				0x00ff0011);
-	return;
-}
-
-/* On the sandpoint X2, we must avoid sending configuration cycles to
- * device #12 (IDSEL addr = AD12).
- */
-static int
-x2_exclude_device(u_char bus, u_char devfn)
-{
-	if ((bus == 0) && (PCI_SLOT(devfn) == SANDPOINT_HOST_BRIDGE_IDSEL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-static void __init
-sandpoint_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		/* Do early winbond init, then scan PCI bus */
-		sandpoint_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		ppc_md.pcibios_fixup = NULL;
-		ppc_md.pcibios_fixup_bus = NULL;
-		ppc_md.pci_swizzle = common_swizzle;
-		if (sandpoint_is_x2) {
-			ppc_md.pci_map_irq = x2_map_irq;
-			ppc_md.pci_exclude_device = x2_exclude_device;
-		} else
-			ppc_md.pci_map_irq = x3_map_irq;
-	}
-	else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-	return;
-}
-
-static void __init
-sandpoint_setup_arch(void)
-{
-	/* Probe for Sandpoint model */
-	sandpoint_probe_type();
-	if (sandpoint_is_x2)
-		epic_serial_mode = 0;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	/* Lookup PCI host bridges */
-	sandpoint_find_bridges();
-
-	if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0)
-	{
-		bd_t *bp = (bd_t *)__res;
-		struct plat_serial8250_port *pdata;
-
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-
-#ifdef CONFIG_SANDPOINT_ENABLE_UART1
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-#else
-		ppc_sys_device_remove(MPC10X_UART1);
-#endif
-	}
-
-	printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	/* DINK32 12.3 and below do not correctly enable any caches.
-	 * We will do this now with good known values.  Future versions
-	 * of DINK32 are supposed to get this correct.
-	 */
-	if (cpu_has_feature(CPU_FTR_SPEC7450))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cpu_has_feature(CPU_FTR_L2CR))
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-				| L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-#if 0
-	/* Untested right now. */
-	if (cpu_has_feature(CPU_FTR_L3CR)) {
-		/* Magic value. */
-		_set_L3CR(0x8f032000);
-	}
-#endif
-}
-
-#define	SANDPOINT_87308_CFG_ADDR		0x15c
-#define	SANDPOINT_87308_CFG_DATA		0x15d
-
-#define	SANDPOINT_87308_CFG_INB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	(byte) = inb(SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define	SANDPOINT_87308_CFG_OUTB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	outb((byte), SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define SANDPOINT_87308_SELECT_DEV(dev_num) {				\
-	SANDPOINT_87308_CFG_OUTB(0x07, (dev_num));			\
-}
-
-#define	SANDPOINT_87308_DEV_ENABLE(dev_num) {				\
-	SANDPOINT_87308_SELECT_DEV(dev_num);				\
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01);				\
-}
-
-/*
- * To probe the Sandpoint type, we need to check for a connection between GPIO
- * pins 6 and 7 on the NS87308 SuperIO.
- */
-static void __init sandpoint_probe_type(void)
-{
-	u8 x;
-	/* First, ensure that the GPIO pins are enabled. */
-	SANDPOINT_87308_SELECT_DEV(0x07); /* Select GPIO logical device */
-	SANDPOINT_87308_CFG_OUTB(0x60, 0x07); /* Base address 0x700 */
-	SANDPOINT_87308_CFG_OUTB(0x61, 0x00);
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01); /* Enable */
-
-	/* Now, set pin 7 to output and pin 6 to input. */
-	outb((inb(0x701) | 0x80) & 0xbf, 0x701);
-	/* Set push-pull output */
-	outb(inb(0x702) | 0x80, 0x702);
-	/* Set pull-up on input */
-	outb(inb(0x703) | 0x40, 0x703);
-	/* Set output high and check */
-	x = inb(0x700);
-	outb(x | 0x80, 0x700);
-	x = inb(0x700);
-	sandpoint_is_x2 = ! (x & 0x40);
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("High output says X2", 0);
-	/* Set output low and check */
-	outb(x & 0x7f, 0x700);
-	sandpoint_is_x2 |= inb(0x700) & 0x40;
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("Low output says X2", 0);
-	if (ppc_md.progress && ! sandpoint_is_x2)
-		ppc_md.progress("Sandpoint is X3", 0);
-}
-
-/*
- * Fix IDE interrupts.
- */
-static int __init
-sandpoint_fix_winbond_83553(void)
-{
-	/* Make some 8259 interrupt level sensitive */
-	outb(0xe0, 0x4d0);
-	outb(0xde, 0x4d1);
-
-	return 0;
-}
-
-arch_initcall(sandpoint_fix_winbond_83553);
-
-/*
- * Initialize the ISA devices on the Nat'l PC87308VUL SuperIO chip.
- */
-static int __init
-sandpoint_setup_natl_87308(void)
-{
-	u_char	reg;
-
-	/*
-	 * Enable all the devices on the Super I/O chip.
-	 */
-	SANDPOINT_87308_SELECT_DEV(0x00); /* Select kbd logical device */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x00); /* Set KBC clock to 8 Mhz */
-	SANDPOINT_87308_DEV_ENABLE(0x00); /* Enable keyboard */
-	SANDPOINT_87308_DEV_ENABLE(0x01); /* Enable mouse */
-	SANDPOINT_87308_DEV_ENABLE(0x02); /* Enable rtc */
-	SANDPOINT_87308_DEV_ENABLE(0x03); /* Enable fdc (floppy) */
-	SANDPOINT_87308_DEV_ENABLE(0x04); /* Enable parallel */
-	SANDPOINT_87308_DEV_ENABLE(0x05); /* Enable UART 2 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-	SANDPOINT_87308_DEV_ENABLE(0x06); /* Enable UART 1 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	return 0;
-}
-
-arch_initcall(sandpoint_setup_natl_87308);
-
-static int __init
-sandpoint_request_io(void)
-{
-	request_region(0x00,0x20,"dma1");
-	request_region(0x20,0x20,"pic1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xa0,0x20,"pic2");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-arch_initcall(sandpoint_request_io);
-
-/*
- * Interrupt setup and service.  Interrupts on the Sandpoint come
- * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
- * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
- * IDE is on EPIC 7 and 8.
- */
-static void __init
-sandpoint_init_IRQ(void)
-{
-	int i;
-
-	OpenPIC_InitSenses = sandpoint_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
-
-	mpc10x_set_openpic();
-	openpic_hookup_cascade(sandpoint_is_x2 ? 17 : NUM_8259_INTERRUPTS, "82c59 cascade",
-			i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static unsigned long __init
-sandpoint_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	/* DINK32 13.0 correctly initializes things, so iff you use
-	 * this you _should_ be able to change this instead of a
-	 * hardcoded value. */
-#if 0
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-#else
-	return 32*1024*1024;
-#endif
-}
-
-static void __init
-sandpoint_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void
-sandpoint_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* Reset system via Port 92 */
-	outb(0x00, 0x92);
-	outb(0x01, 0x92);
-	for(;;);	/* Spin until reset happens */
-}
-
-static void
-sandpoint_power_off(void)
-{
-	local_irq_disable();
-	for(;;);	/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void
-sandpoint_halt(void)
-{
-	sandpoint_power_off();
-	/* NOTREACHED */
-}
-
-static int
-sandpoint_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola SPS\n");
-	seq_printf(m, "machine\t\t: Sandpoint\n");
-
-	return 0;
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-sandpoint_set_bat(void)
-{
-	unsigned long bat3u, bat3l;
-
-	__asm__ __volatile__(
-			" lis %0,0xf800\n	\
-			ori %1,%0,0x002a\n	\
-			ori %0,%0,0x0ffe\n	\
-			mtspr 0x21e,%0\n	\
-			mtspr 0x21f,%1\n	\
-			isync\n			\
-			sync "
-			: "=r" (bat3u), "=r" (bat3l));
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	sandpoint_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = sandpoint_setup_arch;
-	ppc_md.show_cpuinfo = sandpoint_show_cpuinfo;
-	ppc_md.init_IRQ = sandpoint_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = sandpoint_restart;
-	ppc_md.power_off = sandpoint_power_off;
-	ppc_md.halt = sandpoint_halt;
-
-	ppc_md.find_end_of_memory = sandpoint_find_end_of_memory;
-	ppc_md.setup_io_mappings = sandpoint_map_io;
-
-	TODC_INIT(TODC_TYPE_PC97307, 0x70, 0x00, 0x71, 8);
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_mc146818_read_val;
-	ppc_md.nvram_write_val = todc_mc146818_write_val;
-
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
deleted file mode 100644
index ed83759e4044..000000000000
--- a/arch/ppc/platforms/sandpoint.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Definitions for Motorola SPS Sandpoint Test Platform
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Sandpoint uses the CHRP map (Map B).
- */
-
-#ifndef __PPC_PLATFORMS_SANDPOINT_H
-#define __PPC_PLATFORMS_SANDPOINT_H
-
-#include <asm/ppcboot.h>
-
-#if 0
-/* The Sandpoint X3 allows the IDE interrupt to be directly connected
- * from the Windbond (PCI INTC or INTD) to the serial EPIC.  Someday
- * we should try this, but it was easier to use the existing 83c553
- * initialization than change it to route the different interrupts :-).
- *	-- Dan
- */
-#define SANDPOINT_IDE_INT0		23	/* EPIC 7 */
-#define SANDPOINT_IDE_INT1		24	/* EPIC 8 */
-#endif
-
-/*
- * The sandpoint boards have processor modules that either have an 8240 or
- * an MPC107 host bridge on them.  These bridges have an IDSEL line that allows
- * them to respond to PCI transactions as if they were a normal PCI devices.
- * However, the processor on the processor side of the bridge can not reach
- * out onto the PCI bus and then select the bridge or bad things will happen
- * (documented in the 8240 and 107 manuals).
- * Because of this, we always skip the bridge PCI device when accessing the
- * PCI bus.  The PCI slot that the bridge occupies is defined by the macro
- * below.
- */
-#define SANDPOINT_HOST_BRIDGE_IDSEL     12
-
-/*
- * Serial defines.
- */
-#define SANDPOINT_SERIAL_0		0xfe0003f8
-#define SANDPOINT_SERIAL_1		0xfe0002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD			( 1843200 / 16 )
-#define UART_CLK			1843200
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM },				  \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __PPC_PLATFORMS_SANDPOINT_H */
diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c
deleted file mode 100644
index 24f6e0694ac1..000000000000
--- a/arch/ppc/platforms/sbc82xx.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * SBC82XX platform support
- *
- * Author: Guy Streeter <streeter@redhat.com>
- *
- * Derived from: est8260_setup.c by Allen Curtis, ONZ
- *
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mpc8260.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/immap_cpm2.h>
-#include <asm/pci.h>
-
-static void (*callback_init_IRQ)(void);
-
-extern unsigned char __res[sizeof(bd_t)];
-
-#ifdef CONFIG_GEN_RTC
-TODC_ALLOC();
-
-/*
- * Timer init happens before mem_init but after paging init, so we cannot
- * directly use ioremap() at that time.
- * late_time_init() is call after paging init.
- */
-
-static void sbc82xx_time_init(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-
-	/* Set up CS11 for RTC chip */
-	mc->memc_br11=0;
-	mc->memc_or11=0xffff0836;
-	mc->memc_br11=SBC82xx_TODC_NVRAM_ADDR | 0x0801;
-
-	TODC_INIT(TODC_TYPE_MK48T59, 0, 0, SBC82xx_TODC_NVRAM_ADDR, 0);
-
-	todc_info->nvram_data =
-		(unsigned int)ioremap(todc_info->nvram_data, 0x2000);
-	BUG_ON(!todc_info->nvram_data);
-	ppc_md.get_rtc_time	= todc_get_rtc_time;
-	ppc_md.set_rtc_time	= todc_set_rtc_time;
-	ppc_md.nvram_read_val	= todc_direct_read_val;
-	ppc_md.nvram_write_val	= todc_direct_write_val;
-	todc_time_init();
-}
-#endif /* CONFIG_GEN_RTC */
-
-static volatile char *sbc82xx_i8259_map;
-static char sbc82xx_i8259_mask = 0xff;
-static DEFINE_SPINLOCK(sbc82xx_i8259_lock);
-
-static void sbc82xx_i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	(void) sbc82xx_i8259_map[1];	/* Dummy read */
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	sbc82xx_i8259_map[0] = 0x20;	/* OCW2: Non-specific EOI */
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask &= ~(1 << irq_nr);
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_end_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq].action)
-		sbc82xx_i8259_unmask_irq(irq);
-}
-
-
-struct hw_interrupt_type sbc82xx_i8259_ic = {
-	.typename = " i8259     ",
-	.enable = sbc82xx_i8259_unmask_irq,
-	.disable = sbc82xx_i8259_mask_irq,
-	.ack = sbc82xx_i8259_mask_and_ack_irq,
-	.end = sbc82xx_i8259_end_irq,
-};
-
-static irqreturn_t sbc82xx_i8259_demux(int dummy, void *dev_id)
-{
-	int irq;
-
-	spin_lock(&sbc82xx_i8259_lock);
-
-	sbc82xx_i8259_map[0] = 0x0c;	/* OCW3: Read IR register on RD# pulse */
-	irq = sbc82xx_i8259_map[0] & 7;	/* Read IRR */
-
-	if (irq == 7) {
-		/* Possible spurious interrupt */
-		int isr;
-		sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-		isr = sbc82xx_i8259_map[0];	/* Read ISR */
-
-		if (!(isr & 0x80)) {
-			printk(KERN_INFO "Spurious i8259 interrupt\n");
-			return IRQ_HANDLED;
-		}
-	}
-	__do_IRQ(NR_SIU_INTS + irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sbc82xx_i8259_irqaction = {
-	.handler = sbc82xx_i8259_demux,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 demux",
-};
-
-void __init sbc82xx_init_IRQ(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-	volatile intctl_cpm2_t *ic = &cpm2_immr->im_intctl;
-	int i;
-
-	callback_init_IRQ();
-
-	/* u-boot doesn't always set the board up correctly */
-	mc->memc_br5 = 0;
-	mc->memc_or5 = 0xfff00856;
-	mc->memc_br5 = 0x22000801;
-
-	sbc82xx_i8259_map = ioremap(0x22008000, 2);
-	if (!sbc82xx_i8259_map) {
-		printk(KERN_CRIT "Mapping i8259 interrupt controller failed\n");
-		return;
-	}
-	
-	/* Set up the interrupt handlers for the i8259 IRQs */
-	for (i = NR_SIU_INTS; i < NR_SIU_INTS + 8; i++) {
-                irq_desc[i].chip = &sbc82xx_i8259_ic;
-		irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	/* make IRQ6 level sensitive */
-	ic->ic_siexr &= ~(1 << (14 - (SIU_INT_IRQ6 - SIU_INT_IRQ1)));
-	irq_desc[SIU_INT_IRQ6].status |= IRQ_LEVEL;
-
-	/* Initialise the i8259 */
-	sbc82xx_i8259_map[0] = 0x1b;	/* ICW1: Level, no cascade, ICW4 */
-	sbc82xx_i8259_map[1] = 0x00;	/* ICW2: vector base */
-					/* No ICW3 (no cascade) */
-	sbc82xx_i8259_map[1] = 0x01;	/* ICW4: 8086 mode, normal EOI */
-
-	sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
-
-	/* Request cascade IRQ */
-	if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
-		printk("Installation of i8259 IRQ demultiplexer failed.\n");
-	}
-}
-
-static int sbc82xx_pci_map_irq(struct pci_dev *dev, unsigned char idsel,
-			       unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *  A      B      C      D
-		 */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD },	/* IDSEL 16 - PMC slot */
-		{ SBC82xx_PC_IRQA, SBC82xx_PC_IRQB, -1,  -1  },			/* IDSEL 17 - CardBus */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 18 - PCI-X bridge */
-	};
-
-	const long min_idsel = 16, max_idsel = 18, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __devinit quirk_sbc8260_cardbus(struct pci_dev *pdev)
-{
-	uint32_t ctrl;
-
-	if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(17, 0))
-		return;
-
-	printk(KERN_INFO "Setting up CardBus controller\n");
-
-	/* Set P2CCLK bit in System Control Register */
-	pci_read_config_dword(pdev, 0x80, &ctrl);
-	ctrl |= (1<<27);
-	pci_write_config_dword(pdev, 0x80, ctrl);
-
-	/* Set MFUNC up for PCI IRQ routing via INTA and INTB, and LEDs. */
-	pci_write_config_dword(pdev, 0x8c, 0x00c01d22);
-
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, quirk_sbc8260_cardbus);
-
-void __init
-m82xx_board_init(void)
-{
-	/* u-boot may be using one of the FCC Ethernet devices.
-	   Use the MAC address to the SCC. */
-	__res[offsetof(bd_t, bi_enetaddr[5])] &= ~3;
-
-	/* Anything special for this platform */
-	callback_init_IRQ	= ppc_md.init_IRQ;
-
-	ppc_md.init_IRQ		= sbc82xx_init_IRQ;
-	ppc_md.pci_map_irq	= sbc82xx_pci_map_irq;
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init        = NULL;
-	ppc_md.get_rtc_time     = NULL;
-	ppc_md.set_rtc_time     = NULL;
-	ppc_md.nvram_read_val   = NULL;
-	ppc_md.nvram_write_val  = NULL;
-	late_time_init		= sbc82xx_time_init;
-#endif /* CONFIG_GEN_RTC */
-}
diff --git a/arch/ppc/platforms/sbc82xx.h b/arch/ppc/platforms/sbc82xx.h
deleted file mode 100644
index e4042d4995f6..000000000000
--- a/arch/ppc/platforms/sbc82xx.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Board information for the SBCPowerQUICCII, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#ifndef __PPC_SBC82xx_H__
-#define __PPC_SBC82xx_H__
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR			0xf0000000
-
-#define SBC82xx_TODC_NVRAM_ADDR		0xd0000000
-
-#define SBC82xx_MACADDR_NVRAM_FCC1	0x220000c9	/* JP6B */
-#define SBC82xx_MACADDR_NVRAM_SCC1	0x220000cf	/* JP6A */
-#define SBC82xx_MACADDR_NVRAM_FCC2	0x220000d5	/* JP7A */
-#define SBC82xx_MACADDR_NVRAM_FCC3	0x220000db	/* JP7B */
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Wind River"
-#define CPUINFO_MACHINE		"SBC PowerQUICC II"
-
-#define BOOTROM_RESTART_ADDR      ((uint)0x40000104)
-
-#define SBC82xx_PC_IRQA (NR_SIU_INTS+0)
-#define SBC82xx_PC_IRQB (NR_SIU_INTS+1)
-#define SBC82xx_MPC185_IRQ (NR_SIU_INTS+2)
-#define SBC82xx_ATM_IRQ (NR_SIU_INTS+3)
-#define SBC82xx_PIRQA (NR_SIU_INTS+4)
-#define SBC82xx_PIRQB (NR_SIU_INTS+5)
-#define SBC82xx_PIRQC (NR_SIU_INTS+6)
-#define SBC82xx_PIRQD (NR_SIU_INTS+7)
-
-#endif /* __PPC_SBC82xx_H__ */
diff --git a/arch/ppc/platforms/sbs8260.h b/arch/ppc/platforms/sbs8260.h
deleted file mode 100644
index d51427a0f0d4..000000000000
--- a/arch/ppc/platforms/sbs8260.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASSEMBLY__
-/* Board information for various SBS 8260 cards, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#define CPM_MAP_ADDR	((uint)0xfe000000)
-
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-#endif /* !__ASSEMBLY__ */
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
deleted file mode 100644
index a344134f14b8..000000000000
--- a/arch/ppc/platforms/spruce.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Board and PCI setup routines for IBM Spruce
- *
- * Author: MontaVista Software <source@mvista.com>
- *
- * 2000-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-
-#include <syslib/cpc700.h>
-
-#include "spruce.h"
-
-static inline int
-spruce_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-		/*
-		 * 	PCI IDSEL/INTPIN->INTLINE
-		 * 	A	B	C	D
-		 */
-	{
-		{23, 24, 25, 26},	/* IDSEL 1 - PCI slot 3 */
-		{24, 25, 26, 23},	/* IDSEL 2 - PCI slot 2 */
-		{25, 26, 23, 24},	/* IDSEL 3 - PCI slot 1 */
-		{26, 23, 24, 25},	/* IDSEL 4 - PCI slot 0 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-spruce_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Setup hose */
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	pci_init_resource(&hose->io_resource,
-			SPRUCE_PCI_LOWER_IO,
-			SPRUCE_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			SPRUCE_PCI_LOWER_MEM,
-			SPRUCE_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = SPRUCE_PCI_LOWER_IO;
-	hose->io_space.end = SPRUCE_PCI_UPPER_IO;
-	hose->mem_space.start = SPRUCE_PCI_LOWER_MEM;
-	hose->mem_space.end = SPRUCE_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)SPRUCE_ISA_IO_BASE;
-
-	setup_indirect_pci(hose,
-			SPRUCE_PCI_CONFIG_ADDR,
-			SPRUCE_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = spruce_map_irq;
-}
-
-/*
- * CPC700 PIC interrupt programming table
- *
- * First entry is the sensitivity (level/edge), second is the polarity.
- */
-unsigned int cpc700_irq_assigns[32][2] = {
-	{ 1, 1 },       /* IRQ  0: ECC Correctable Error - rising edge */
-	{ 1, 1 },       /* IRQ  1: PCI Write Mem Range   - rising edge */
-	{ 0, 1 },       /* IRQ  2: PCI Write Command Reg - active high */
-	{ 0, 1 },       /* IRQ  3: UART 0                - active high */
-	{ 0, 1 },       /* IRQ  4: UART 1                - active high */
-	{ 0, 1 },       /* IRQ  5: ICC 0                 - active high */
-	{ 0, 1 },       /* IRQ  6: ICC 1                 - active high */
-	{ 0, 1 },       /* IRQ  7: GPT Compare 0         - active high */
-	{ 0, 1 },       /* IRQ  8: GPT Compare 1         - active high */
-	{ 0, 1 },       /* IRQ  9: GPT Compare 2         - active high */
-	{ 0, 1 },       /* IRQ 10: GPT Compare 3         - active high */
-	{ 0, 1 },       /* IRQ 11: GPT Compare 4         - active high */
-	{ 0, 1 },       /* IRQ 12: GPT Capture 0         - active high */
-	{ 0, 1 },       /* IRQ 13: GPT Capture 1         - active high */
-	{ 0, 1 },       /* IRQ 14: GPT Capture 2         - active high */
-	{ 0, 1 },       /* IRQ 15: GPT Capture 3         - active high */
-	{ 0, 1 },       /* IRQ 16: GPT Capture 4         - active high */
-	{ 0, 0 },       /* IRQ 17: Reserved */
-	{ 0, 0 },       /* IRQ 18: Reserved */
-	{ 0, 0 },       /* IRQ 19: Reserved */
-	{ 0, 1 },       /* IRQ 20: FPGA EXT_IRQ0         - active high */
-	{ 1, 1 },       /* IRQ 21: Mouse                 - rising edge */
-	{ 1, 1 },       /* IRQ 22: Keyboard              - rising edge */
-	{ 0, 0 },       /* IRQ 23: PCI Slot 3            - active low */
-	{ 0, 0 },       /* IRQ 24: PCI Slot 2            - active low */
-	{ 0, 0 },       /* IRQ 25: PCI Slot 1            - active low */
-	{ 0, 0 },       /* IRQ 26: PCI Slot 0            - active low */
-};
-
-static void __init
-spruce_calibrate_decr(void)
-{
-	int freq, divisor = 4;
-
-	/* determine processor bus speed */
-	freq = SPRUCE_BUS_SPEED;
-	tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static int
-spruce_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Spruce\n");
-
-	return 0;
-}
-
-static void __init
-spruce_early_serial_map(void)
-{
-	u32 uart_clk;
-	struct uart_port serial_req;
-
-	if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
-		uart_clk = SPRUCE_BAUD_33M * 16;
-	else
-		uart_clk = SPRUCE_BAUD_30M * 16;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = uart_clk;
-	serial_req.irq = UART0_INT;
-	serial_req.flags = UPF_BOOT_AUTOCONF;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *)UART0_IO_BASE;
-	serial_req.regshift = 0;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(0, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 0 failed\n");
-#endif
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = UART1_INT;
-	serial_req.membase = (u_char *)UART1_IO_BASE;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(1, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 1 failed\n");
-#endif
-}
-
-TODC_ALLOC();
-
-static void __init
-spruce_setup_arch(void)
-{
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1643, 0, 0, SPRUCE_RTC_BASE_ADDR, 8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Setup PCI host bridge */
-	spruce_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA1;
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM Spruce\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-static void
-spruce_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	__asm__ __volatile__
-	("\n\
-	lis	3,0xfff0	\n\
-	ori	3,3,0x0100	\n\
-	mtspr	26,3		\n\
-	li	3,0		\n\
-	mtspr	27,3		\n\
-	rfi			\n\
-	");
-	for(;;);
-}
-
-static void
-spruce_power_off(void)
-{
-	for(;;);
-}
-
-static void
-spruce_halt(void)
-{
-	spruce_restart(NULL);
-}
-
-static void __init
-spruce_map_io(void)
-{
-	io_block_mapping(SPRUCE_PCI_IO_BASE, SPRUCE_PCI_PHY_IO_BASE,
-			 0x08000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-spruce_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	spruce_set_bat();
-
-	isa_io_base = SPRUCE_ISA_IO_BASE;
-	pci_dram_offset = SPRUCE_PCI_SYS_MEM_BASE;
-
-	ppc_md.setup_arch = spruce_setup_arch;
-	ppc_md.show_cpuinfo = spruce_show_cpuinfo;
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.setup_io_mappings = spruce_map_io;
-
-	ppc_md.restart = spruce_restart;
-	ppc_md.power_off = spruce_power_off;
-	ppc_md.halt = spruce_halt;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = spruce_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	spruce_early_serial_map();
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-}
diff --git a/arch/ppc/platforms/spruce.h b/arch/ppc/platforms/spruce.h
deleted file mode 100644
index f1f96f1de72a..000000000000
--- a/arch/ppc/platforms/spruce.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/ppc/platforms/spruce.h
- *
- * Definitions for IBM Spruce reference board support
- *
- * Authors: Matt Porter and Johnnie Peters
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SPRUCE_H__
-#define __ASM_SPRUCE_H__
-
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-#define SPRUCE_PCI_PHY_IO_BASE	0xf8000000
-#define SPRUCE_PCI_IO_BASE	SPRUCE_PCI_PHY_IO_BASE
-
-#define SPRUCE_PCI_SYS_MEM_BASE	0x00000000
-
-#define SPRUCE_PCI_LOWER_MEM	0x80000000
-#define SPRUCE_PCI_UPPER_MEM	0x9fffffff
-#define SPRUCE_PCI_LOWER_IO	0x00000000
-#define SPRUCE_PCI_UPPER_IO	0x03ffffff
-
-#define	SPRUCE_ISA_IO_BASE	SPRUCE_PCI_IO_BASE
-
-#define SPRUCE_MEM_SIZE		0x04000000
-#define SPRUCE_BUS_SPEED	66666667
-
-#define SPRUCE_NVRAM_BASE_ADDR	0xff800000
-#define SPRUCE_RTC_BASE_ADDR	SPRUCE_NVRAM_BASE_ADDR
-
-/*
- * Serial port defines
- */
-#define SPRUCE_FPGA_REG_A	0xff820000
-#define SPRUCE_UARTCLK_33M	0x02
-#define SPRUCE_UARTCLK_IS_33M(reg)	(reg & SPRUCE_UARTCLK_33M)
-
-#define UART0_IO_BASE	0xff600300
-#define UART1_IO_BASE	0xff600400
-
-#define RS_TABLE_SIZE	2
-
-#define SPRUCE_BAUD_33M	(33000000/64)
-#define SPRUCE_BAUD_30M	(30000000/64)
-#define BASE_BAUD	SPRUCE_BAUD_33M
-
-#define UART0_INT	3
-#define UART1_INT	4
-
-#define STD_UART_OP(num)						\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,				\
-		ASYNC_BOOT_AUTOCONF,					\
-		iomem_base: (unsigned char *) UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-#endif /* __ASM_SPRUCE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/tqm8260.h b/arch/ppc/platforms/tqm8260.h
deleted file mode 100644
index 7f8c9a6928f8..000000000000
--- a/arch/ppc/platforms/tqm8260.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * TQM8260 board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __TQM8260_PLATFORM
-#define __TQM8260_PLATFORM
-
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR		((uint)0xFFF00000)
-#define PHY_INTERRUPT		25
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"IN2 Systems"
-#define CPUINFO_MACHINE		"TQM8260 PowerPC"
-
-#define BOOTROM_RESTART_ADDR	((uint)0x40000104)
-
-#endif	/* __TQM8260_PLATFORM */
diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c
deleted file mode 100644
index b766339f44ac..000000000000
--- a/arch/ppc/platforms/tqm8260_setup.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * TQM8260 platform support
- *
- * Author: Allen Curtis <acurtis@onz.com>
- * Derived from: m8260_setup.c by Dan Malek, MVista
- *
- * Copyright 2002 Ones and Zeros, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-
-static int
-tqm8260_set_rtc_time(unsigned long time)
-{
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt = time;
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcntsc = 0x3;
-
-	return(0);
-}
-
-static unsigned long
-tqm8260_get_rtc_time(void)
-{
-	return ((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt;
-}
-
-void __init
-m82xx_board_init(void)
-{
-	/* Anything special for this platform */
-	ppc_md.set_rtc_time	= tqm8260_set_rtc_time;
-	ppc_md.get_rtc_time	= tqm8260_get_rtc_time;
-}
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
deleted file mode 100644
index 662131d0eb39..000000000000
--- a/arch/ppc/platforms/tqm8xx.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * TQM8xx(L) board specific definitions
- *
- * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __MACH_TQM8xx_H
-#define __MACH_TQM8xx_H
-
-
-#include <asm/ppcboot.h>
-
-#ifndef __ASSEMBLY__
-#define	TQM_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define	TQM_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define	IMAP_ADDR	TQM_IMMR_BASE	/* physical base address of IMMR area */
-#define IMAP_SIZE	TQM_IMAP_SIZE	/* mapped size of IMMR area */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#ifndef CONFIG_KUP4K
-# define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-#else	/* CONFIG_KUP4K */
-
-# define	MAX_HWIFS	2	/* overwrite default in include/asm-ppc/ide.h	*/
-# ifndef __ASSEMBLY__
-# include <asm/8xx_immap.h>
-static __inline__ void ide_led(int on)
-{
-	volatile immap_t	*immap = (immap_t *)IMAP_ADDR;
-
-	if (on) {
-		immap->im_ioport.iop_padat &= ~0x80;
-	} else {
-		immap->im_ioport.iop_padat |= 0x80;
-	}
-}
-# endif	/* __ASSEMBLY__ */
-# define IDE_LED(x) ide_led((x))
-#endif	/* CONFIG_KUP4K */
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* define IO_BASE for PCMCIA */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE  (64<<10)
-
-#define	FEC_INTERRUPT		 9	/* = SIU_LEVEL4			*/
-#define PHY_INTERRUPT		12	/* = IRQ6			*/
-#define	IDE0_INTERRUPT		13
-
-#ifdef CONFIG_IDE
-#endif
-
-/*-----------------------------------------------------------------------
- * CPM Ethernet through SCCx.
- *-----------------------------------------------------------------------
- *
- */
-
-/***  TQM823L, TQM850L  ***********************************************/
-
-#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_TQM823L, CONFIG_TQM850L */
-
-/***  TQM860L  ********************************************************/
-
-#ifdef CONFIG_TQM860L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)	/* PA 15 */
-#define PA_ENET_TXD	((ushort)0x0002)	/* PA 14 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0001)	/* PC 15 */
-#define PC_ENET_CLSN	((ushort)0x0010)	/* PC 11 */
-#define PC_ENET_RENA	((ushort)0x0020)	/* PC 10 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x00000026)
-#endif	/* CONFIG_TQM860L */
-
-/***  FPS850L  *********************************************************/
-
-#ifdef CONFIG_FPS850L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0002)	/* PC 14 */
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_FPS850L */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif	/* __MACH_TQM8xx_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
deleted file mode 100644
index 52ddebe6c6d1..000000000000
--- a/arch/ppc/syslib/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-CFLAGS_prom_init.o      += -fPIC
-CFLAGS_btext.o          += -fPIC
-
-wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
-
-obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
-obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
-obj-$(CONFIG_PPC_OCP)		+= ocp.o
-obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
-obj-$(CONFIG_44x)		+= ibm44x_common.o
-obj-$(CONFIG_440EP)		+= ibm440gx_common.o
-obj-$(CONFIG_440GP)		+= ibm440gp_common.o
-obj-$(CONFIG_440GX)		+= ibm440gx_common.o
-obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
-obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
-ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o
-obj-y				+= virtex_devices.o
-else
-ifeq ($(CONFIG_403),y)
-obj-$(CONFIG_40x)		+= ppc403_pic.o
-else
-obj-$(CONFIG_40x)		+= ppc4xx_pic.o
-endif
-endif
-obj-$(CONFIG_44x)		+= ppc4xx_pic.o
-obj-$(CONFIG_40x)		+= ppc4xx_setup.o
-obj-$(CONFIG_GEN_RTC)		+= todc_time.o
-obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
-obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
-ifeq ($(CONFIG_40x),y)
-obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
-endif
-endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
-				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
-obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
-obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EV64360)		+= todc_time.o
-obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
-obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_HDPU)		+= pci_auto.o
-obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_KATANA)		+= pci_auto.o
-obj-$(CONFIG_MV64360)		+= mv64360_pic.o
-obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
-obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o \
-					pci_auto.o hawk_common.o
-obj-$(CONFIG_OCOTEA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_PAL4)		+= cpc700_pic.o
-obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
-obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o \
-				   todc_time.o pci_auto.o
-obj-$(CONFIG_PRPMC750)		+= open_pic.o pci_auto.o \
-					hawk_common.o
-obj-$(CONFIG_HARRIER)		+= harrier.o
-obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_SBC82xx)		+= todc_time.o
-obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
-				   todc_time.o
-obj-$(CONFIG_TAISHAN)		+= pci_auto.o
-obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
-				   ppc_sys.o
-obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o
-obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
-obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
-ifeq ($(CONFIG_PPC_GEN550),y)
-obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
-endif
-ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
-endif
-obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
-obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
-					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
-ifeq ($(CONFIG_PPC_MPC52xx),y)
-obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
-
-obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
deleted file mode 100644
index d11667046f21..000000000000
--- a/arch/ppc/syslib/btext.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Procedures for drawing on the screen early on in the boot process.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-
-#include <asm/sections.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-
-#define NO_SCROLL
-
-#ifndef NO_SCROLL
-static void scrollscreen(void);
-#endif
-
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);
-
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
-
-unsigned long disp_BAT[2] __initdata = {0, 0};
-
-#define cmapsz	(16*256)
-
-static unsigned char vga_font[cmapsz];
-
-int boot_text_mapped;
-int force_printk_to_btext = 0;
-
-boot_infos_t disp_bi;
-
-extern char *klimit;
-
-/*
- * Powermac can use btext_* after boot for xmon,
- * chrp only uses it during early boot.
- */
-#ifdef CONFIG_XMON
-#define BTEXT
-#define BTDATA
-#else
-#define BTEXT	__init
-#define BTDATA	__initdata
-#endif /* CONFIG_XMON */
-
-/*
- * This is called only when we are booted via BootX.
- */
-void __init
-btext_init(boot_infos_t *bi)
-{
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
-	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
-	disp_bi = *bi;
-	boot_text_mapped = 1;
-}
-
-void __init
-btext_welcome(void)
-{
-	unsigned long flags;
-	unsigned long pvr;
-	boot_infos_t* bi = &disp_bi;
-
-	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
-	btext_drawstring("\nlinked at        : 0x");
-	btext_drawhex(KERNELBASE);
-	btext_drawstring("\nframe buffer at  : 0x");
-	btext_drawhex((unsigned long)bi->dispDeviceBase);
-	btext_drawstring(" (phys), 0x");
-	btext_drawhex((unsigned long)bi->logicalDisplayBase);
-	btext_drawstring(" (log)");
-	btext_drawstring("\nklimit           : 0x");
-	btext_drawhex((unsigned long)klimit);
-	btext_drawstring("\nMSR              : 0x");
-	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
-	btext_drawhex(flags);
-	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
-	pvr >>= 16;
-	if (pvr > 1) {
-	    btext_drawstring("\nHID0             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
-	    btext_drawstring("\nICTC             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	btext_drawstring("\n\n");
-}
-
-/* Calc BAT values for mapping the display and store them
- * in disp_BAT.  Those values are then used from head.S to map
- * the display during identify_machine() and MMU_Init()
- *
- * The display is mapped to virtual address 0xD0000000, rather
- * than 1:1, because some some CHRP machines put the frame buffer
- * in the region starting at 0xC0000000 (KERNELBASE).
- * This mapping is temporary and will disappear as soon as the
- * setup done by MMU_Init() is applied.
- *
- * For now, we align the BAT and then map 8Mb on 601 and 16Mb
- * on other PPCs. This may cause trouble if the framebuffer
- * is really badly aligned, but I didn't encounter this case
- * yet.
- */
-void __init
-btext_prepare_BAT(void)
-{
-	boot_infos_t* bi = &disp_bi;
-	unsigned long vaddr = KERNELBASE + 0x10000000;
-	unsigned long addr;
-	unsigned long lowbits;
-
-	addr = (unsigned long)bi->dispDeviceBase;
-	if (!addr) {
-		boot_text_mapped = 0;
-		return;
-	}
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, G3, G4, ... */
-		lowbits = addr & ~0xFF000000UL;
-		addr &= 0xFF000000UL;
-		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
-		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
-	} else {
-		/* 601 */
-		lowbits = addr & ~0xFF800000UL;
-		addr &= 0xFF800000UL;
-		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
-		disp_BAT[1] = addr | BL_8M | 0x40;
-	}
-	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
-		    unsigned long address)
-{
-	boot_infos_t* bi = &disp_bi;
-
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-	bi->logicalDisplayBase = (unsigned char *)address;
-	bi->dispDeviceBase = (unsigned char *)address;
-	bi->dispDeviceRowBytes = pitch;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	boot_text_mapped = 1;
-}
-
-/* Here's a small text engine to use during early boot
- * or for debugging purposes
- *
- * todo:
- *
- *  - build some kind of vgacon with it to enable early printk
- *  - move to a separate file
- *  - add a few video driver hooks to keep in sync with display
- *    changes.
- */
-
-void
-map_boot_text(void)
-{
-	unsigned long base, offset, size;
-	boot_infos_t *bi = &disp_bi;
-	unsigned char *vbase;
-
-	/* By default, we are no longer mapped */
-	boot_text_mapped = 0;
-	if (bi->dispDeviceBase == 0)
-		return;
-	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
-	offset = ((unsigned long) bi->dispDeviceBase) - base;
-	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
-		+ bi->dispDeviceRect[0];
-	vbase = ioremap(base, size);
-	if (vbase == 0)
-		return;
-	bi->logicalDisplayBase = vbase + offset;
-	boot_text_mapped = 1;
-}
-
-/* Calc the base address of a given point (x,y) */
-static unsigned char * BTEXT
-calc_base(boot_infos_t *bi, int x, int y)
-{
-	unsigned char *base;
-
-	base = bi->logicalDisplayBase;
-	if (base == 0)
-		base = bi->dispDeviceBase;
-	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
-	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
-	return base;
-}
-
-/* Adjust the display to a new resolution */
-void
-btext_update_display(unsigned long phys, int width, int height,
-		     int depth, int pitch)
-{
-	boot_infos_t *bi = &disp_bi;
-
-	if (bi->dispDeviceBase == 0)
-		return;
-
-	/* check it's the same frame buffer (within 256MB) */
-	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
-		return;
-
-	bi->dispDeviceBase = (__u8 *) phys;
-	bi->dispDeviceRect[0] = 0;
-	bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRowBytes = pitch;
-	if (boot_text_mapped) {
-		iounmap(bi->logicalDisplayBase);
-		boot_text_mapped = 0;
-	}
-	map_boot_text();
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-}
-
-void BTEXT btext_clearscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j; --j)
-			*(ptr++) = 0;
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-__inline__ void dcbst(const void* addr)
-{
-	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
-}
-
-void BTEXT btext_flushscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j>0; j-=8) {
-			dcbst(ptr);
-			ptr += 8;
-		}
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-#ifndef NO_SCROLL
-static BTEXT void
-scrollscreen(void)
-{
-	boot_infos_t* bi		= &disp_bi;
-	unsigned long *src		= (unsigned long *)calc_base(bi,0,16);
-	unsigned long *dst		= (unsigned long *)calc_base(bi,0,0);
-	unsigned long width		= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-						(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-#ifdef CONFIG_ADB_PMU
-	pmu_suspend();	/* PMU will not shut us down ! */
-#endif
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1] - 16); i++)
-	{
-		unsigned long *src_ptr = src;
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = *(src_ptr++);
-		src += (bi->dispDeviceRowBytes >> 2);
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-	for (i=0; i<16; i++)
-	{
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = 0;
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-#ifdef CONFIG_ADB_PMU
-	pmu_resume();	/* PMU will not shut us down ! */
-#endif
-}
-#endif /* ndef NO_SCROLL */
-
-void BTEXT btext_drawchar(char c)
-{
-	int cline = 0, x;
-
-	if (!boot_text_mapped)
-		return;
-
-	switch (c) {
-	case '\b':
-		if (g_loc_X > 0)
-			--g_loc_X;
-		break;
-	case '\t':
-		g_loc_X = (g_loc_X & -8) + 8;
-		break;
-	case '\r':
-		g_loc_X = 0;
-		break;
-	case '\n':
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-		break;
-	default:
-		draw_byte(c, g_loc_X++, g_loc_Y);
-	}
-	if (g_loc_X >= g_max_loc_X) {
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-	}
-#ifndef NO_SCROLL
-	while (g_loc_Y >= g_max_loc_Y) {
-		scrollscreen();
-		g_loc_Y--;
-	}
-#else
-	/* wrap around from bottom to top of screen so we don't
-	   waste time scrolling each line.  -- paulus. */
-	if (g_loc_Y >= g_max_loc_Y)
-		g_loc_Y = 0;
-	if (cline) {
-		for (x = 0; x < g_max_loc_X; ++x)
-			draw_byte(' ', x, g_loc_Y);
-	}
-#endif
-}
-
-void BTEXT
-btext_drawstring(const char *c)
-{
-	if (!boot_text_mapped)
-		return;
-	while (*c)
-		btext_drawchar(*c++);
-}
-
-void BTEXT
-btext_drawhex(unsigned long v)
-{
-	static char hex_table[] = "0123456789abcdef";
-
-	if (!boot_text_mapped)
-		return;
-	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
-	btext_drawchar(' ');
-}
-
-static void BTEXT
-draw_byte(unsigned char c, long locX, long locY)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned char *base	= calc_base(bi, locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned long)c) * 16];
-	int rb			= bi->dispDeviceRowBytes;
-
-	switch(bi->dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned long *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned long *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned long *)base, rb);
-		break;
-	}
-}
-
-static unsigned long expand_bits_8[16] BTDATA = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned long expand_bits_16[4] BTDATA = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void BTEXT
-draw_byte_32(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_16(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_8(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static unsigned char vga_font[cmapsz] BTDATA = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
-0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
-0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
-0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
-0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
-0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
-0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
-0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
-0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
-0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
-0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
-0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
-0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
-0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
-0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
-0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
-0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
-0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
-0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
-0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
-0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
-0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
-0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
-0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
-0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
-0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
-0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
-0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
-0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
-0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
-0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
-0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
-0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
-0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
-0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
-0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
-0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
-0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
-0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
-0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
-0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
-0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
-0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
-0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
-0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
-0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
-0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
-0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
-0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
-0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
-0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
-0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
-0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
-0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
-0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
-0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
-0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
-0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
-0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
-0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
-0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
-0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
-0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
-0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
-0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
-0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00,
-};
diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h
deleted file mode 100644
index 987e9aa0dd45..000000000000
--- a/arch/ppc/syslib/cpc700.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Header file for IBM CPC700 Host Bridge, et. al.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the defines and macros for the IBM CPC700 host bridge,
- * memory controller, PIC, UARTs, IIC, and Timers.
- */
-
-#ifndef	__PPC_SYSLIB_CPC700_H__
-#define	__PPC_SYSLIB_CPC700_H__
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-/* XXX no barriers? not even any volatiles?  -- paulus */
-#define CPC700_OUT_32(a,d)  (*(u_int *)a = d)
-#define CPC700_IN_32(a)     (*(u_int *)a)
-
-/*
- * PCI Section
- */
-#define CPC700_PCI_CONFIG_ADDR          0xfec00000
-#define CPC700_PCI_CONFIG_DATA          0xfec00004
-
-/* CPU -> PCI memory window 0 */
-#define CPC700_PMM0_LOCAL		0xff400000	/* CPU physical addr */
-#define CPC700_PMM0_MASK_ATTR		0xff400004	/* size and attrs */
-#define CPC700_PMM0_PCI_LOW		0xff400008	/* PCI addr, low word */
-#define CPC700_PMM0_PCI_HIGH		0xff40000c	/* PCI addr, high wd */
-/* CPU -> PCI memory window 1 */
-#define CPC700_PMM1_LOCAL		0xff400010
-#define CPC700_PMM1_MASK_ATTR		0xff400014
-#define CPC700_PMM1_PCI_LOW		0xff400018
-#define CPC700_PMM1_PCI_HIGH		0xff40001c
-/* CPU -> PCI memory window 2 */
-#define CPC700_PMM2_LOCAL		0xff400020
-#define CPC700_PMM2_MASK_ATTR		0xff400024
-#define CPC700_PMM2_PCI_LOW		0xff400028
-#define CPC700_PMM2_PCI_HIGH		0xff40002c
-/* PCI memory -> CPU window 1 */
-#define CPC700_PTM1_MEMSIZE		0xff400030	/* window size */
-#define CPC700_PTM1_LOCAL		0xff400034	/* CPU phys addr */
-/* PCI memory -> CPU window 2 */
-#define CPC700_PTM2_MEMSIZE		0xff400038	/* size and enable */
-#define CPC700_PTM2_LOCAL		0xff40003c
-
-/*
- * PIC Section
- *
- * IBM calls the CPC700's programmable interrupt controller the Universal
- * Interrupt Controller or UIC.
- */
-
-/*
- * UIC Register Addresses.
- */
-#define	CPC700_UIC_UICSR		0xff500880	/* Status Reg (Rd/Clr)*/
-#define	CPC700_UIC_UICSRS		0xff500884	/* Status Reg (Set) */
-#define	CPC700_UIC_UICER		0xff500888	/* Enable Reg */
-#define	CPC700_UIC_UICCR		0xff50088c	/* Critical Reg */
-#define	CPC700_UIC_UICPR		0xff500890	/* Polarity Reg */
-#define	CPC700_UIC_UICTR		0xff500894	/* Trigger Reg */
-#define	CPC700_UIC_UICMSR		0xff500898	/* Masked Status Reg */
-#define	CPC700_UIC_UICVR		0xff50089c	/* Vector Reg */
-#define	CPC700_UIC_UICVCR		0xff5008a0	/* Vector Config Reg */
-
-#define	CPC700_UIC_UICER_ENABLE		0x00000001	/* Enable an IRQ */
-
-#define	CPC700_UIC_UICVCR_31_HI		0x00000000	/* IRQ 31 hi priority */
-#define	CPC700_UIC_UICVCR_0_HI		0x00000001	/* IRQ 0 hi priority */
-#define CPC700_UIC_UICVCR_BASE_MASK	0xfffffffc
-#define CPC700_UIC_UICVCR_ORDER_MASK	0x00000001
-
-/* Specify value of a bit for an IRQ. */
-#define	CPC700_UIC_IRQ_BIT(i)		((0x00000001) << (31 - (i)))
-
-/*
- * UIC Exports...
- */
-extern struct hw_interrupt_type cpc700_pic;
-extern unsigned int cpc700_irq_assigns[32][2];
-
-extern void __init cpc700_init_IRQ(void);
-extern int cpc700_get_irq(void);
-
-#endif	/* __PPC_SYSLIB_CPC700_H__ */
diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c
deleted file mode 100644
index d48e8f45c050..000000000000
--- a/arch/ppc/syslib/cpc700_pic.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Interrupt controller support for IBM Spruce
- *
- * Authors: Mark Greer, Matt Porter, and Johnnie Peters
- *	    mgreer@mvista.com
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-
-#include "cpc700.h"
-
-static void
-cpc700_unmask_irq(unsigned int irq)
-{
-	unsigned int tr_bits;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		tr_bits = CPC700_IN_32(CPC700_UIC_UICTR);
-
-		if ((tr_bits & (1 << (31 - irq))) == 0) {
-			/* level trigger interrupt, clear bit in status
-			 * register */
-			CPC700_OUT_32(CPC700_UIC_UICSR, 1 << (31 - irq));
-		}
-
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] |= CPC700_UIC_IRQ_BIT(irq);
-	
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_irq(unsigned int irq)
-{
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] &=
-			~CPC700_UIC_IRQ_BIT(irq);
-
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_and_ack_irq(unsigned int irq)
-{
-	u_int	bit;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		bit = CPC700_UIC_IRQ_BIT(irq);
-
-		ppc_cached_irq_mask[0] &= ~bit;
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-		CPC700_OUT_32(CPC700_UIC_UICSR, bit); /* Write 1 clears IRQ */
-	}
-	return;
-}
-
-static struct hw_interrupt_type cpc700_pic = {
-	.typename = "CPC700 PIC",
-	.enable = cpc700_unmask_irq,
-	.disable = cpc700_mask_irq,
-	.ack = cpc700_mask_and_ack_irq,
-};
-
-__init static void
-cpc700_pic_init_irq(unsigned int irq)
-{
-	unsigned int tmp;
-
-	/* Set interrupt sense */
-	tmp = CPC700_IN_32(CPC700_UIC_UICTR);
-	if (cpc700_irq_assigns[irq][0] == 0) {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICTR, tmp);
-
-	/* Set interrupt polarity */
-	tmp = CPC700_IN_32(CPC700_UIC_UICPR);
-	if (cpc700_irq_assigns[irq][1]) {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICPR, tmp);
-
-	/* Set interrupt critical */
-	tmp = CPC700_IN_32(CPC700_UIC_UICCR);
-	tmp |= CPC700_UIC_IRQ_BIT(irq);
-	CPC700_OUT_32(CPC700_UIC_UICCR, tmp);
-		
-	return;
-}
-
-__init void
-cpc700_init_IRQ(void)
-{
-	int i;
-
-	ppc_cached_irq_mask[0] = 0;
-	CPC700_OUT_32(CPC700_UIC_UICER, 0x00000000);    /* Disable all irq's */
-	CPC700_OUT_32(CPC700_UIC_UICSR, 0xffffffff);    /* Clear cur intrs */
-	CPC700_OUT_32(CPC700_UIC_UICCR, 0xffffffff);    /* Gen INT not MCP */
-	CPC700_OUT_32(CPC700_UIC_UICPR, 0x00000000);    /* Active low */
-	CPC700_OUT_32(CPC700_UIC_UICTR, 0x00000000);    /* Level Sensitive */
-	CPC700_OUT_32(CPC700_UIC_UICVR, CPC700_UIC_UICVCR_0_HI);
-						        /* IRQ 0 is highest */
-
-	for (i = 0; i < 17; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	for (i = 20; i < 32; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	return;
-}
-
-
-
-/*
- * Find the highest IRQ that generating an interrupt, if any.
- */
-int
-cpc700_get_irq(void)
-{
-	int irq = 0;
-	u_int irq_status, irq_test = 1;
-
-	irq_status = CPC700_IN_32(CPC700_UIC_UICMSR);
-
-	do
-	{
-		if (irq_status & irq_test)
-			break;
-		irq++;
-		irq_test <<= 1;
-	} while (irq < NR_IRQS);
-	
-
-	if (irq == NR_IRQS)
-	    irq = 33;
-
-	return (31 - irq);
-}
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
deleted file mode 100644
index 6cd859d7721f..000000000000
--- a/arch/ppc/syslib/cpm2_common.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- *	2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc8260.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cpm2.h>
-#include <asm/rheap.h>
-
-static void cpm2_dpinit(void);
-cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-cpm2_map_t *cpm2_immr;
-
-#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
-					   of space for CPM as it is larger
-					   than on PQ2 */
-
-void
-cpm2_reset(void)
-{
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-
-	/* Reclaim the DP memory for our use.
-	 */
-	cpm2_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	 */
-	cpmp = &cpm2_immr->im_cpm;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks.  The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers).  Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	volatile uint	*bp;
-
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
-	if (div16)
-		*bp |= CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)&cpm2_immr->im_dprambase[offset];
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
deleted file mode 100644
index fb2d5842641a..000000000000
--- a/arch/ppc/syslib/cpm2_pic.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* The CPM2 internal interrupt controller.  It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "cpm2_pic.h"
-
-static	u_char	irq_to_siureg[] = {
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* bit numbers do not match the docs, these are precomputed so the bit for
- * a given irq is (1 << irq_to_siubit[irq]) */
-static	u_char	irq_to_siubit[] = {
-	 0, 15, 14, 13, 12, 11, 10,  9,
-	 8,  7,  6,  5,  4,  3,  2,  1,
-	 2,  1,  0, 14, 13, 12, 11, 10,
-	 9,  8,  7,  6,  5,  4,  3,  0,
-	31, 30, 29, 28, 27, 26, 25, 24,
-	23, 22, 21, 20, 19, 18, 17, 16,
-	16, 17, 18, 19, 20, 21, 22, 23,
-	24, 25, 26, 27, 28, 29, 30, 31,
-};
-
-static void cpm2_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] |= 1 << bit;
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr, *sipnr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-	sipnr[word] = 1 << bit;
-}
-
-static void cpm2_end_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-
-		irq_nr -= CPM_IRQ_OFFSET;
-		bit = irq_to_siubit[irq_nr];
-		word = irq_to_siureg[irq_nr];
-
-		simr = &(cpm2_immr->im_intctl.ic_simrh);
-		ppc_cached_irq_mask[word] |= 1 << bit;
-		simr[word] = ppc_cached_irq_mask[word];
-		/*
-		 * Work around large numbers of spurious IRQs on PowerPC 82xx
-		 * systems.
-		 */
-		mb();
-	}
-}
-
-static struct hw_interrupt_type cpm2_pic = {
-	.typename = " CPM2 SIU ",
-	.enable = cpm2_unmask_irq,
-	.disable = cpm2_mask_irq,
-	.ack = cpm2_mask_and_ack,
-	.end = cpm2_end_irq,
-};
-
-int cpm2_get_irq(void)
-{
-	int irq;
-        unsigned long bits;
-
-        /* For CPM2, read the SIVEC register and shift the bits down
-         * to get the irq number.         */
-        bits = cpm2_immr->im_intctl.ic_sivec;
-        irq = bits >> 26;
-
-	if (irq == 0)
-		return(-1);
-	return irq+CPM_IRQ_OFFSET;
-}
-
-void cpm2_init_IRQ(void)
-{
-	int i;
-
-	/* Clear the CPM IRQ controller, in case it has any bits set
-	 * from the bootloader
-	 */
-
-	/* Mask out everything */
-	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
-	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
-	wmb();
-
-	/* Ack everything */
-	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
-	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
-	wmb();
-
-	/* Dummy read of the vector */
-	i = cpm2_immr->im_intctl.ic_sivec;
-	rmb();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_sicr = 0;
-	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
-	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
-
-
-	/* Enable chaining to OpenPIC, and make everything level
-	 */
-	for (i = 0; i < NR_CPM_INTS; i++) {
-		irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic;
-		irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/syslib/cpm2_pic.h b/arch/ppc/syslib/cpm2_pic.h
deleted file mode 100644
index 467339337a78..000000000000
--- a/arch/ppc/syslib/cpm2_pic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _PPC_KERNEL_CPM2_H
-#define _PPC_KERNEL_CPM2_H
-
-extern int cpm2_get_irq(void);
-
-extern void cpm2_init_IRQ(void);
-
-#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h
deleted file mode 100644
index 5254d3cdbca6..000000000000
--- a/arch/ppc/syslib/gen550.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * gen550 prototypes
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void gen550_kgdb_map_scc(void);
diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c
deleted file mode 100644
index 9293f5c59099..000000000000
--- a/arch/ppc/syslib/gen550_dbg.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * A library of polled 16550 serial routines.  These are intended to
- * be used to support progress messages, xmon, kgdb, etc. on a
- * variety of platforms.
- *
- * Adapted from lots of code ripped from the arch/ppc/boot/ polled
- * 16550 support.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* For linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <asm/machdep.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#define SERIAL_BAUD	9600
-
-/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
-};
-
-static void (*serial_outb)(unsigned long, unsigned char);
-static unsigned long (*serial_inb)(unsigned long);
-
-static int shift;
-
-unsigned long direct_inb(unsigned long addr)
-{
-	return readb((void __iomem *)addr);
-}
-
-void direct_outb(unsigned long addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)addr);
-}
-
-unsigned long io_inb(unsigned long port)
-{
-	return inb(port);
-}
-
-void io_outb(unsigned long port, unsigned char val)
-{
-	outb(val, port);
-}
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			serial_outb = io_outb;
-			serial_inb = io_inb;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			serial_outb = direct_outb;
-			serial_inb = direct_inb;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-
-	/* save the LCR */
-	lcr = serial_inb(com_port + (UART_LCR << shift));
-	
-	/* Access baud rate */
-	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
-	dlm = serial_inb(com_port + (UART_DLM << shift));
-
-	/*
-	 * Test if serial port is unconfigured
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-	if ((dlm <= 4) && (lcr & 2)) {
-		/* port is configured, put the old LCR back */
-		serial_outb(com_port + (UART_LCR << shift), lcr);
-	}
-	else {
-		/* Input clock. */
-		serial_outb(com_port + (UART_DLL << shift),
-			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
-		serial_outb(com_port + (UART_DLM << shift),
-				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		serial_outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		serial_outb(com_port + (UART_MCR << shift), 0x03);
-
-		/* Clear & enable FIFOs */
-		serial_outb(com_port + (UART_FCR << shift), 0x07);
-	}
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	serial_outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return serial_inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
-
-void
-serial_close(unsigned long com_port)
-{
-}
-
-void
-gen550_init(int i, struct uart_port *serial_req)
-{
-	rs_table[i].io_type = serial_req->iotype;
-	rs_table[i].port = serial_req->iobase;
-	rs_table[i].iomem_base = serial_req->membase;
-	rs_table[i].iomem_reg_shift = serial_req->regshift;
-	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
-}
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-void
-gen550_progress(char *s, unsigned short hex)
-{
-	volatile unsigned int progress_debugport;
-	volatile char c;
-
-	progress_debugport = serial_init(0, NULL);
-
-	serial_putc(progress_debugport, '\r');
-
-	while ((c = *s++) != 0)
-		serial_putc(progress_debugport, c);
-
-	serial_putc(progress_debugport, '\n');
-	serial_putc(progress_debugport, '\r');
-}
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c
deleted file mode 100644
index 987cc0414e6e..000000000000
--- a/arch/ppc/syslib/gen550_kgdb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic 16550 kgdb support intended to be useful on a variety
- * of platforms.  To enable this support, it is necessary to set
- * the CONFIG_GEN550 option.  Any virtual mapping of the serial
- * port(s) to be used can be accomplished by setting
- * ppc_md.early_serial_map to a platform-specific mapping function.
- *
- * Adapted from ppc4xx_kgdb.c.
- *
- * Author: Matt Porter <mporter@kernel.crashing.org>
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-extern unsigned long serial_init(int, void *);
-extern unsigned long serial_getc(unsigned long);
-extern unsigned long serial_putc(unsigned long, unsigned char);
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#elif defined(CONFIG_KGDB_TTYS2)
-#define KGDB_PORT 2
-#elif defined(CONFIG_KGDB_TTYS3)
-#define KGDB_PORT 3
-#else
-#error "invalid kgdb_tty port"
-#endif
-
-static volatile unsigned int kgdb_debugport;
-
-void putDebugChar(unsigned char c)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	serial_putc(kgdb_debugport, c);
-}
-
-int getDebugChar(void)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	return(serial_getc(kgdb_debugport));
-}
-
-void kgdb_interruptible(int enable)
-{
-	return;
-}
-
-void putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-/*
- * Note: gen550_init() must be called already on the port we are going
- * to use.
- */
-void
-gen550_kgdb_map_scc(void)
-{
-	printk(KERN_DEBUG "kgdb init\n");
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-	kgdb_debugport = serial_init(KGDB_PORT, NULL);
-}
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
deleted file mode 100644
index 3b4fcca5d1e1..000000000000
--- a/arch/ppc/syslib/gt64260_pic.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Interrupt controller support for Galileo's GT64260.
- *
- * Author: Chris Zankel <source@mvista.com>
- * Modified by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on sources from Rabeeh Khoury / Galileo Technology
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the specific functions to support the GT64260
- * interrupt controller.
- *
- * The GT64260 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the GT64260.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#define CPU_INTR_STR	"gt64260 cpu interface error"
-#define PCI0_INTR_STR	"gt64260 pci 0 error"
-#define PCI1_INTR_STR	"gt64260 pci 1 error"
-
-/* ========================== forward declaration ========================== */
-
-static void gt64260_unmask_irq(unsigned int);
-static void gt64260_mask_irq(unsigned int);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type gt64260_pic = {
-	.typename = " gt64260_pic ",
-	.enable   = gt64260_unmask_irq,
-	.disable  = gt64260_mask_irq,
-	.ack      = gt64260_mask_irq,
-	.end      = gt64260_unmask_irq,
-};
-
-u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */
-
-static struct mv64x60_handle bh;
-
-/* gt64260_init_irq()
- *
- *  This function initializes the interrupt controller. It assigns
- *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller.
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-gt64260_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]);
-
-	/* use the gt64260 for all (possible) interrupt sources */
-	for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++)
-		irq_desc[i].chip = &gt64260_pic;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: exit", 0x0);
-}
-
-/*
- * gt64260_get_irq()
- *
- *  This function returns the lowest interrupt number of all interrupts that
- *  are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- */
-int
-gt64260_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-	irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if (irq >= 24) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			} else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (gt64260_irq_base + irq);
-}
-
-/* gt64260_unmask_irq()
- *
- *  This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_unmask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* gt64260_mask_irq()
- *
- *  This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_mask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-gt64260_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-gt64260_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init
-gt64260_register_hdlrs(void)
-{
-	int rc;
-
-	/* Register CPU interface error interrupt handler */
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
-		gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe);
-
-	/* Register PCI 0 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24);
-
-	/* Register PCI 1 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24);
-
-	return 0;
-}
-
-arch_initcall(gt64260_register_hdlrs);
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
deleted file mode 100644
index 45b797b3a336..000000000000
--- a/arch/ppc/syslib/harrier.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Motorola MCG Harrier northbridge/memory controller support
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/harrier.h>
-
-/* define defaults for inbound windows */
-#define HARRIER_ITAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-#define HARRIER_MPAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-/*
- * Initialize the inbound window size on a non-monarch harrier.
- */
-void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
-{
-	u16 temps;
-	u32 temp;
-
-	if (in0_size > HARRIER_ITSZ_2GB) {
-		printk
-		    ("harrier_setup_nonmonarch: Invalid window size code %d\n",
-		     in0_size);
-		return;
-	}
-
-	/* Clear the PCI memory enable bit. If we don't, then when the
-	 * inbound windows are enabled below, the corresponding BARs will be
-	 * "live" and start answering to PCI memory reads from their default
-	 * addresses (0x0), which overlap with system RAM.
-	 */
-	temps = in_le16((u16 *) (ppc_reg_base +
-				 HARRIER_XCSR_CONFIG(PCI_COMMAND)));
-	temps &= ~(PCI_COMMAND_MEMORY);
-	out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
-		 temps);
-
-	/* Setup a non-prefetchable inbound window */
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
-
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
-	temp &= ~HARRIER_ITAT_PRE;
-	temp |= HARRIER_ITAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
-
-	/* Enable the message passing block */
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
-	temp |= HARRIER_MPAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
-}
-
-void __init harrier_release_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Set EREADY to allow the line to be pulled up after everyone is
-	 * ready.
-	 */
-	temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-	temp |= HARRIER_EREADY;
-	out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
-}
-
-void __init harrier_wait_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Poll the ERDYS line until it goes high to indicate that all
-	 * non-monarch PrPMCs are ready for bus enumeration (or that there are
-	 * no PrPMCs present).
-	 */
-
-	/* FIXME: Add a timeout of some kind to prevent endless waits. */
-	do {
-
-		temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-
-	} while (!(temp & HARRIER_ERDYS));
-}
-
-/*
- * Initialize the Motorola MCG Harrier host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses and assumes that the mapping of PCI memory space back to system
- * memory is set up correctly by PPCBug.
- */
-int __init
-harrier_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end, ulong processor_mpic_base)
-{
-	uint addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
-	    || ((processor_pci_io_start & 0xffff0000) !=
-		processor_pci_io_start)) {
-		printk("harrier_init: %s\n",
-		       "PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
-		printk("harrier_init: PPC to PCI mappings %s\n",
-		       "must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("harrier_init: %s\n",
-		       "PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("harrier_init: %s\n",
-		       "MPIC address must start on 256 KB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("harrier_init: %s\n",
-		       "pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *       because sanity check above ensures that they are properly
-	 *       aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-#ifdef CONFIG_HARRIER_STORE_GATHERING
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
-#else
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
-#endif
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
-
-	/* Enable MPIC */
-	OpenPIC_Addr = (void *)processor_mpic_base;
-	addr = (processor_mpic_base >> 16) | 1;
-	out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
-	out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
-	      HARRIER_MPIC_OPI_ENABLE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Harrier correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024UL)
-
-static uint harrier_size_table[] __initdata = {
-	0 * MB,			/* 0 ==>    0 MB */
-	32 * MB,		/* 1 ==>   32 MB */
-	64 * MB,		/* 2 ==>   64 MB */
-	64 * MB,		/* 3 ==>   64 MB */
-	128 * MB,		/* 4 ==>  128 MB */
-	128 * MB,		/* 5 ==>  128 MB */
-	128 * MB,		/* 6 ==>  128 MB */
-	256 * MB,		/* 7 ==>  256 MB */
-	256 * MB,		/* 8 ==>  256 MB */
-	256 * MB,		/* 9 ==>  256 MB */
-	512 * MB,		/* a ==>  512 MB */
-	512 * MB,		/* b ==>  512 MB */
-	512 * MB,		/* c ==>  512 MB */
-	1024 * MB,		/* d ==> 1024 MB */
-	1024 * MB,		/* e ==> 1024 MB */
-	2048 * MB,		/* f ==> 2048 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init harrier_get_mem_size(uint xcsr_base)
-{
-	ulong last_addr;
-	int i;
-	uint vend_dev_id;
-	uint *size_table;
-	uint val;
-	uint *csrp;
-	uint size;
-	int size_table_entries;
-
-	vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
-		size_table = harrier_size_table;
-		size_table_entries = sizeof(harrier_size_table) /
-		    sizeof(harrier_size_table[0]);
-	} else {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Harrier", vend_dev_id);
-		return 0;
-	}
-
-	last_addr = 0;
-
-	csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
-	for (i = 0; i < 8; i++) {
-		val = in_be32(csrp++);
-
-		if (val & 0x100) {	/* If enabled */
-			size = val >> HARRIER_SDB_SIZE_SHIFT;
-			size &= HARRIER_SDB_SIZE_MASK;
-			if (size >= size_table_entries) {
-				break;	/* Register not set correctly */
-			}
-			size = size_table[size];
-
-			val &= ~(size - 1);
-			val += size;
-
-			if (val > last_addr) {
-				last_addr = val;
-			}
-		}
-	}
-
-	return last_addr;
-}
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
deleted file mode 100644
index 86821d8753ed..000000000000
--- a/arch/ppc/syslib/hawk_common.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-
-/*
- * The Falcon/Raven and HAWK has 4 sets of registers:
- *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
- *      etc.
- *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- *      MPIC base address.
- *   3) MPIC registers.
- *   4) System Memory Controller (SMC) registers.
- */
-
-/*
- * Initialize the Motorola MCG Raven or HAWK host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses based on the PCI I/O address that is passed in.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- */
-int __init
-hawk_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end,
-	     ulong processor_mpic_base)
-{
-	uint		addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
-	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
-		printk("hawk_init: %s\n",
-			"PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
-		printk("hawk_init: PPC to PCI mappings %s\n",
-			"must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("hawk_init: %s\n",
-			"PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("hawk_init: %s\n",
-			"MPIC address must start on 256 MB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("hawk_init: %s\n",
-			"pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Disable previous PPC->PCI mappings.
-	 */
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
-
-	/*
-	 * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *	 because sanity check above ensures that they are properly
-	 *	 aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
-
-	/* Set up PPC->MPIC mapping on the bridge */
-	addr = processor_mpic_base |
-	        (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
-	/* No write posting for this PCI Mem space */
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
-
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
-
-	hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
-			(processor_pci_io_end - processor_pci_io_start + 1));
-
-	/*
-	 * Set up the indirect method of accessing PCI config space.
-	 * The PCI config addr/data pair based on start addr of PCI I/O space.
-	 */
-	setup_indirect_pci(hose,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
-
-	/*
-	 * Disable previous PCI->PPC mappings.
-	 */
-
-	/* XXXX Put in mappings from PCI bus to processor bus XXXX */
-
-	/*
-	 * Disable MPIC response to PCI I/O space (BAR 0).
-	 * Make MPIC respond to PCI Mem space at specified address.
-	 * (BAR 1).
-	 */
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_0,
-			         0x00000000 | 0x1);
-
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_1,
-			         (processor_mpic_base -
-				 processor_pci_mem_start + 
-				 hose->mem_space.start) | 0x0);
-
-	/* Map MPIC into virtual memory */
-	OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024)
-
-static uint reg_offset_table[] __initdata = {
-	HAWK_SMC_RAM_A_SIZE_REG_OFF,
-	HAWK_SMC_RAM_B_SIZE_REG_OFF,
-	HAWK_SMC_RAM_C_SIZE_REG_OFF,
-	HAWK_SMC_RAM_D_SIZE_REG_OFF,
-	HAWK_SMC_RAM_E_SIZE_REG_OFF,
-	HAWK_SMC_RAM_F_SIZE_REG_OFF,
-	HAWK_SMC_RAM_G_SIZE_REG_OFF,
-	HAWK_SMC_RAM_H_SIZE_REG_OFF
-};
-
-static uint falcon_size_table[] __initdata = {
-	   0 * MB, /* 0 ==>    0 MB */
-	  16 * MB, /* 1 ==>   16 MB */
-	  32 * MB, /* 2 ==>   32 MB */
-	  64 * MB, /* 3 ==>   64 MB */
-	 128 * MB, /* 4 ==>  128 MB */
-	 256 * MB, /* 5 ==>  256 MB */
-        1024 * MB, /* 6 ==> 1024 MB (1 GB) */
-};
-
-static uint hawk_size_table[] __initdata = {
-	  0 * MB, /* 0 ==>    0 MB */
-	 32 * MB, /* 1 ==>   32 MB */
-	 64 * MB, /* 2 ==>   64 MB */
-	 64 * MB, /* 3 ==>   64 MB */
-	128 * MB, /* 4 ==>  128 MB */
-	128 * MB, /* 5 ==>  128 MB */
-	128 * MB, /* 6 ==>  128 MB */
-	256 * MB, /* 7 ==>  256 MB */
-	256 * MB, /* 8 ==>  256 MB */
-	512 * MB, /* 9 ==>  512 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init
-hawk_get_mem_size(uint smc_base)
-{
-	unsigned long	total;
-	int		i, size_table_entries, reg_limit;
-	uint		vend_dev_id;
-	uint		*size_table;
-	u_char		val;
-
-
-	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
-		size_table = falcon_size_table;
-		size_table_entries = sizeof(falcon_size_table) /
-				     sizeof(falcon_size_table[0]);
-
-		reg_limit = FALCON_SMC_REG_COUNT;
-	}
-	else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
-		size_table = hawk_size_table;
-		size_table_entries = sizeof(hawk_size_table) /
-				     sizeof(hawk_size_table[0]);
-		reg_limit = HAWK_SMC_REG_COUNT;
-	}
-	else {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Falcon or HAWK", vend_dev_id);
-		return 0;
-	}
-
-	total = 0;
-
-	/* Check every reg because PPCBug may skip some */
-	for (i=0; i<reg_limit; i++) {
-		val = in_8((u_char *)(smc_base + reg_offset_table[i]));
-
-		if (val & 0x80) {	/* If enabled */
-			val &= 0x0f;
-
-			/* Don't go past end of size_table */
-			if (val < size_table_entries) {
-				total += size_table[val];
-			}
-			else {	/* Register not set correctly */
-				break;
-			}
-		}
-	}
-
-	return total;
-}
-
-int __init
-hawk_mpic_init(unsigned int pci_mem_offset)
-{
-	unsigned short	devid;
-	unsigned int	pci_membase;
-
-	/* Check the first PCI device to see if it is a Raven or Hawk. */
-	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
-	switch (devid) {
-	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
-	case PCI_DEVICE_ID_MOTOROLA_HAWK:
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Read the memory base register. */
-	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Map the MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
-	return 0;
-}
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
deleted file mode 100644
index 559f27c6aefe..000000000000
--- a/arch/ppc/syslib/i8259.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * i8259 interrupt controller driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-
-static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
-
-static unsigned char cached_8259[2] = { 0xff, 0xff };
-#define cached_A1 (cached_8259[0])
-#define cached_21 (cached_8259[1])
-
-static DEFINE_SPINLOCK(i8259_lock);
-
-static int i8259_pic_irq_offset;
-
-/*
- * Acknowledge the IRQ using either the PCI host bridge's interrupt
- * acknowledge feature or poll.  How i8259_init() is called determines
- * which is called.  It should be noted that polling is broken on some
- * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
- */
-int i8259_irq(void)
-{
-	int irq;
-
-	spin_lock(&i8259_lock);
-
-	/* Either int-ack or poll for the IRQ */
-	if (pci_intack)
-		irq = readb(pci_intack);
-	else {
-		/* Perform an interrupt acknowledge cycle on controller 1. */
-		outb(0x0C, 0x20);		/* prepare for poll */
-		irq = inb(0x20) & 7;
-		if (irq == 2 ) {
-			/*
-			 * Interrupt is cascaded so perform interrupt
-			 * acknowledge on controller 2.
-			 */
-			outb(0x0C, 0xA0);	/* prepare for poll */
-			irq = (inb(0xA0) & 7) + 8;
-		}
-	}
-
-	if (irq == 7) {
-		/*
-		 * This may be a spurious interrupt.
-		 *
-		 * Read the interrupt status register (ISR). If the most
-		 * significant bit is not set then there is no valid
-		 * interrupt.
-		 */
-		if (!pci_intack)
-			outb(0x0B, 0x20);	/* ISR register */
-		if(~inb(0x20) & 0x80)
-			irq = -1;
-	}
-
-	spin_unlock(&i8259_lock);
-	return irq + i8259_pic_irq_offset;
-}
-
-static void i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr > 7) {
-		cached_A1 |= 1 << (irq_nr-8);
-		inb(0xA1); 	/* DUMMY */
-		outb(cached_A1, 0xA1);
-		outb(0x20, 0xA0);	/* Non-specific EOI */
-		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
-	} else {
-		cached_21 |= 1 << irq_nr;
-		inb(0x21); 	/* DUMMY */
-		outb(cached_21, 0x21);
-		outb(0x20, 0x20);	/* Non-specific EOI */
-	}
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_set_irq_mask(int irq_nr)
-{
-	outb(cached_A1,0xA1);
-	outb(cached_21,0x21);
-}
-
-static void i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 |= 1 << irq_nr;
-	else
-		cached_A1 |= 1 << (irq_nr-8);
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 &= ~(1 << irq_nr);
-	else
-		cached_A1 &= ~(1 << (irq_nr-8));
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static struct irq_chip i8259_pic = {
-	.typename	= " i8259    ",
-	.mask		= i8259_mask_irq,
-	.disable	= i8259_mask_irq,
-	.unmask		= i8259_unmask_irq,
-	.mask_ack	= i8259_mask_and_ack_irq,
-};
-
-static struct resource pic1_iores = {
-	.name = "8259 (master)",
-	.start = 0x20,
-	.end = 0x21,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic2_iores = {
-	.name = "8259 (slave)",
-	.start = 0xa0,
-	.end = 0xa1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic_edgectrl_iores = {
-	.name = "8259 edge control",
-	.start = 0x4d0,
-	.end = 0x4d1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct irqaction i8259_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "82c59 secondary cascade",
-};
-
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
- */
-void __init i8259_init(unsigned long intack_addr, int offset)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence */
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0x21); /* Select 8086 mode */
-
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0xA1); /* Select 8086 mode */
-
-	/* always read ISR */
-	outb(0x0B, 0x20);
-	outb(0x0B, 0xA0);
-
-	/* Mask all interrupts */
-	outb(cached_A1, 0xA1);
-	outb(cached_21, 0x21);
-
-	spin_unlock_irqrestore(&i8259_lock, flags);
-
-	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
-		set_irq_chip_and_handler(offset + i, &i8259_pic,
-					 handle_level_irq);
-		irq_desc[offset + i].status |= IRQ_LEVEL;
-	}
-
-	/* reserve our resources */
-	setup_irq(offset + 2, &i8259_irqaction);
-	request_resource(&ioport_resource, &pic1_iores);
-	request_resource(&ioport_resource, &pic2_iores);
-	request_resource(&ioport_resource, &pic_edgectrl_iores);
-
-	if (intack_addr != 0)
-		pci_intack = ioremap(intack_addr, 1);
-
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c
deleted file mode 100644
index a3927ec9b5d7..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-
-/*
- * Calculate 440GP clocks
- */
-void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
-				unsigned int sys_clk,
-				unsigned int ser_clk)
-{
-	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
-	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
-	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
-	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
-
-	if (cpc0_sys0 & 0x2){
-		/* Bypass system PLL */
-		p->cpu = p->plb = sys_clk;
-	}
-	else {
-		u32 fbdv, fwdva, fwdvb, m, vco;
-
-		fbdv = (cpc0_sys0 >> 18) & 0x0f;
-		if (!fbdv)
-			fbdv = 16;
-
-		fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
-		fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
-
-    		/* Feedback path */	
-		if (cpc0_sys0 & 0x00000080){
-			/* PerClk */
-			m = fwdvb * opdv * epdv;
-		}
-		else {
-			/* CPU clock */
-			m = fbdv * fwdva;
-    		}
-		vco = sys_clk * m;
-		p->cpu = vco / fwdva;
-		p->plb = vco / fwdvb;
-	}
-
-	p->opb = p->plb / opdv;
-	p->ebc = p->opb / epdv;
-
-	if (cpc0_cr0 & 0x00400000){
-		/* External UART clock */
-		p->uart0 = p->uart1 = ser_clk;
-	}
-	else {
-		/* Internal UART clock */
-    		u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
-		p->uart0 = p->uart1 = p->plb / uart_div;
-	}
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h
deleted file mode 100644
index 94d7835038ad..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
-#define __PPC_SYSLIB_IBM440GP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 13.1 in 440GP user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gp_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
deleted file mode 100644
index 6ad52f4a26e1..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 - 2006 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <syslib/ibm440gx_common.h>
-
-/*
- * Calculate 440GX clocks
- */
-static inline u32 __fix_zero(u32 v, u32 def){
-	return v ? v : def;
-}
-
-void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
-	unsigned int ser_clk)
-{
-	u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
-	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
-	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
-	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
-#ifdef CONFIG_440EP
-	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
-	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
-#endif
-
-	/* Dividers */
-	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
-	u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
-	u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
-	u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
-	u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
-	u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
-	u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
-	u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
-
-	/* Input clocks for primary dividers */
-	u32 clk_a, clk_b;
-
-	if (pllc & 0x40000000){
-		u32 m;
-
-		/* Feedback path */
-		switch ((pllc >> 24) & 7){
-		case 0:
-			/* PLLOUTx */
-			m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
-			break;
-		case 1:
-			/* CPU */
-			m = fwdva * pradv0;
-			break;
-		case 5:
-			/* PERClk */
-			m = fwdvb * prbdv0 * opbdv0 * perdv0;
-			break;
-		default:
-			printk(KERN_EMERG "invalid PLL feedback source\n");
-			goto bypass;
-		}
-		m *= fbdv;
-		p->vco = sys_clk * m;
-		clk_a = p->vco / fwdva;
-		clk_b = p->vco / fwdvb;
-	}
-	else {
-bypass:
-		/* Bypass system PLL */
-		p->vco = 0;
-		clk_a = clk_b = sys_clk;
-	}
-
-	p->cpu = clk_a / pradv0;
-	p->plb = clk_b / prbdv0;
-	p->opb = p->plb / opbdv0;
-	p->ebc = p->opb / perdv0;
-
-	/* UARTs clock */
-	if (uart0 & 0x00800000)
-		p->uart0 = ser_clk;
-	else
-		p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
-
-	if (uart1 & 0x00800000)
-		p->uart1 = ser_clk;
-	else
-		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
-#ifdef CONFIG_440EP
-	if (uart2 & 0x00800000)
-		p->uart2 = ser_clk;
-	else
-		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
-
-	if (uart3 & 0x00800000)
-		p->uart3 = ser_clk;
-	else
-		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
-#endif
-}
-
-/* Issue L2C diagnostic command */
-static inline u32 l2c_diag(u32 addr)
-{
-	mtdcr(DCRN_L2C0_ADDR, addr);
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-	return mfdcr(DCRN_L2C0_DATA);
-}
-
-static irqreturn_t l2c_error_handler(int irq, void* dev)
-{
-	u32 sr = mfdcr(DCRN_L2C0_SR);
-	if (sr & L2C_SR_CPE){
-		/* Read cache trapped address */
-		u32 addr = l2c_diag(0x42000000);
-		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-	if (sr & L2C_SR_TPE){
-		/* Read tag trapped address */
-		u32 addr = l2c_diag(0x82000000) >> 16;
-		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-
-	/* Clear parity errors */
-	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
-		mtdcr(DCRN_L2C0_ADDR, 0);
-		mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-	} else
-		printk(KERN_EMERG "L2C: LRU error\n");
-
-	return IRQ_HANDLED;
-}
-
-/* Enable L2 cache */
-void __init ibm440gx_l2c_enable(void){
-	u32 r;
-	unsigned long flags;
-
-	/* Install error handler */
-	if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
-		printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable SRAM */
-	mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
-
-	/* Enable L2_MODE without ICU/DCU */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
-	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	mtdcr(DCRN_L2C0_ADDR, 0);
-
-	/* Hardware Clear Command */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-
-	/* Clear Cache Parity and Tag Errors */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-
-	/* Enable 64G snoop region starting at 0 */
-	r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP0, r);
-
-	r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP1, r);
-
-	asm volatile ("sync" ::: "memory");
-
-	/* Enable ICU/DCU ports */
-	r = mfdcr(DCRN_L2C0_CFG);
-	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
-		| L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
-	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
-		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-/* Disable L2 cache */
-void __init ibm440gx_l2c_disable(void){
-	u32 r;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable L2C mode */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	/* Enable SRAM */
-	mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR,
-	      SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB1CR,
-	      SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB2CR,
-	      SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB3CR,
-	      SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
-{
-	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
-	   enable it on all other revisions
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
-			strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
-			|| (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
-				== 0 && p->cpu > 667000000))
-		ibm440gx_l2c_disable();
-	else
-		ibm440gx_l2c_enable();
-}
-
-int __init ibm440gx_get_eth_grp(void)
-{
-	return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
-}
-
-void __init ibm440gx_set_eth_grp(int group)
-{
-	SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
-}
-
-void __init ibm440gx_tah_enable(void)
-{
-	/* Enable TAH0 and TAH1 */
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH0);
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH1);
-}
-
-int ibm440gx_show_cpuinfo(struct seq_file *m){
-
-	u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
-	const char* s;
-	if (l2c_cfg & L2C_CFG_L2M){
-	    switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
-		case L2C_CFG_ICU: s = "I-Cache only";    break;
-		case L2C_CFG_DCU: s = "D-Cache only";    break;
-		default:	  s = "I-Cache/D-Cache"; break;
-	    }
-	}
-	else
-	    s = "disabled";
-
-	seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
-	    l2c_cfg, mfdcr(DCRN_L2C0_SR));
-
-	return 0;
-}
-
-void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
-				   unsigned long r5, unsigned long r6,
-				   unsigned long r7)
-{
-	/* Erratum 440_43 workaround, disable L1 cache parity checking */
-	if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
-	    !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
-		mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
-
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-}
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
deleted file mode 100644
index 8d6f203e7a1d..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GX_COMMON_H
-#define __PPC_SYSLIB_IBM440GX_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 14.1 in 440GX user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-/* common 440GX platform init */
-void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			    unsigned long r6, unsigned long r7) __init;
-
-/* Enable L2 cache */
-void ibm440gx_l2c_enable(void) __init;
-
-/* Disable L2 cache */
-void ibm440gx_l2c_disable(void) __init;
-
-/* Enable/disable L2 cache for a particular chip revision */
-void ibm440gx_l2c_setup(struct ibm44x_clocks*) __init;
-
-/* Get Ethernet Group */
-int ibm440gx_get_eth_grp(void) __init;
-
-/* Set Ethernet Group */
-void ibm440gx_set_eth_grp(int group) __init;
-
-/* Enable TAH devices */
-void ibm440gx_tah_enable(void) __init;
-
-/* Add L2C info to /proc/cpuinfo */
-int ibm440gx_show_cpuinfo(struct seq_file*);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GX_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
deleted file mode 100644
index 571f8bcf78e6..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * PPC440SP/PPC440SPe system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/param.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Read the 440SP memory controller to get size of system memory.
- */
-unsigned long __init ibm440sp_find_end_of_memory(void)
-{
-	u32 i;
-	u32 mem_size = 0;
-
-	/* Read two bank sizes and sum */
-	for (i=0; i< MQ0_NUM_BANKS; i++)
-		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
-			case MQ0_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case MQ0_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case MQ0_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case MQ0_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case MQ0_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case MQ0_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case MQ0_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-			case MQ0_CONFIG_SIZE_1G:
-				mem_size += PPC44x_MEM_SIZE_1G;
-				break;
-			case MQ0_CONFIG_SIZE_2G:
-				mem_size += PPC44x_MEM_SIZE_2G;
-				break;
-			default:
-				break;
-		}
-	return mem_size;
-}
diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h
deleted file mode 100644
index 8077bf8ed118..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * PPC440SP system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440SP_COMMON_H
-#define __PPC_SYSLIB_IBM440SP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long __init ibm440sp_find_end_of_memory(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440SP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
deleted file mode 100644
index 01f99b4a6649..000000000000
--- a/arch/ppc/syslib/ibm44x_common.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * PPC44x system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/initrd.h>
-
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/param.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-
-/* Global Variables */
-bd_t __res;
-
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
-	phys_addr_t page_4gb = 0;
-
-        /*
-	 * Trap the least significant 32-bit portions of an
-	 * address in the 440's 36-bit address space.  Fix
-	 * them up with the appropriate ERPN
-	 */
-	if ((addr >= PPC44x_IO_LO) && (addr <= PPC44x_IO_HI))
-		page_4gb = PPC44x_IO_PAGE;
-	else if ((addr >= PPC44x_PCI0CFG_LO) && (addr <= PPC44x_PCI0CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#ifdef CONFIG_440SP
-	else if ((addr >= PPC44x_PCI1CFG_LO) && (addr <= PPC44x_PCI1CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-	else if ((addr >= PPC44x_PCI2CFG_LO) && (addr <= PPC44x_PCI2CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#endif
-	else if ((addr >= PPC44x_PCIMEM_LO) && (addr <= PPC44x_PCIMEM_HI))
-		page_4gb = PPC44x_PCIMEM_PAGE;
-
-	return (page_4gb | addr);
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
-void __init ibm44x_calibrate_decr(unsigned int freq)
-{
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
-extern void abort(void);
-
-static void ibm44x_restart(char *cmd)
-{
-	local_irq_disable();
-	abort();
-}
-
-static void ibm44x_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void ibm44x_halt(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-/*
- * Read the 44x memory controller to get size of system memory.
- */
-static unsigned long __init ibm44x_find_end_of_memory(void)
-{
-	u32 i, bank_config;
-	u32 mem_size = 0;
-
-	for (i=0; i<4; i++)
-	{
-		switch (i)
-		{
-			case 0:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
-				break;
-			case 1:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
-				break;
-			case 2:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
-				break;
-			case 3:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
-				break;
-		}
-
-		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
-		if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
-			continue;
-		switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
-		{
-			case SDRAM_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case SDRAM_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case SDRAM_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case SDRAM_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case SDRAM_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case SDRAM_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case SDRAM_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-		}
-	}
-	return mem_size;
-}
-
-void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-				 unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif  /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	ppc_md.init_IRQ = ppc4xx_pic_init;
-	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
-	ppc_md.restart = ibm44x_restart;
-	ppc_md.power_off = ibm44x_power_off;
-	ppc_md.halt = ibm44x_halt;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-#if !defined(CONFIG_BDI_SWITCH)
-	/* Enable internal debug mode */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-
-	/* Clear any residual debug events */
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
-	       mfdcr(DCRN_PLB0_BESRL));
-	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
-	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
-	       mfdcr(DCRN_PLB1_BESRL));
-#else
-    	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
-		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
-#endif
-	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
-		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
-		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
-	printk("OPB0: BEAR=0x%08x%08x BSTAT=0x%08x\n",
-		mfdcr(DCRN_OPB0_BEARH), mfdcr(DCRN_OPB0_BEARL),
-		mfdcr(DCRN_OPB0_BSTAT));
-}
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
deleted file mode 100644
index f179db8634e0..000000000000
--- a/arch/ppc/syslib/ibm44x_common.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PPC44x system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM44x_COMMON_H
-#define __PPC_SYSLIB_IBM44x_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * All clocks are in Hz
- */
-struct ibm44x_clocks {
-	unsigned int vco;	/* VCO, 0 if system PLL is bypassed */
-	unsigned int cpu;	/* CPUCoreClk */
-	unsigned int plb;	/* PLBClk */
-	unsigned int opb;	/* OPBClk */
-	unsigned int ebc;	/* PerClk */
-	unsigned int uart0;
-	unsigned int uart1;
-#ifdef CONFIG_440EP
-	unsigned int uart2;
-	unsigned int uart3;
-#endif
-};
-
-/* common 44x platform init */
-void ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7) __init;
-
-/* initialize decrementer and tick-related variables */
-void ibm44x_calibrate_decr(unsigned int freq) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM44x_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c
deleted file mode 100644
index 2ee176610e7c..000000000000
--- a/arch/ppc/syslib/ibm_ocp.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <linux/module.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-
-struct ocp_sys_info_data ocp_sys_info = {
-	.opb_bus_freq	=	50000000,	/* OPB Bus Frequency (Hz) */
-	.ebc_bus_freq	=	33333333,	/* EBC Bus Frequency (Hz) */
-};
-
-EXPORT_SYMBOL(ocp_sys_info);
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
deleted file mode 100644
index 83b323a7d029..000000000000
--- a/arch/ppc/syslib/indirect_pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_PPC_INDIRECT_PCI_BE
-#define PCI_CFG_OUT out_be32
-#else
-#define PCI_CFG_OUT out_le32
-#endif
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	indirect_read_config,
-	indirect_write_config
-};
-
-void __init
-setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-	void __iomem * cfg_data)
-{
-	hose->cfg_addr = cfg_addr;
-	hose->cfg_data = cfg_data;
-	hose->ops = &indirect_pci_ops;
-}
-
-void __init
-setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	unsigned long base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase, *addr, *data;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	data = mbase + (cfg_data & ~PAGE_MASK);
-	setup_indirect_pci_nomap(hose, addr, data);
-}
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
deleted file mode 100644
index ebb8c8f8f30c..000000000000
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Workaround for device erratum PCI 9.
- * See Motorola's "XPC826xA Family Device Errata Reference."
- * The erratum applies to all 8260 family Hip4 processors.  It is scheduled 
- * to be fixed in HiP4 Rev C.  Erratum PCI 9 states that a simultaneous PCI 
- * inbound write transaction and PCI outbound read transaction can result in a 
- * bus deadlock.  The suggested workaround is to use the IDMA controller to 
- * perform all reads from PCI configuration, memory, and I/O space.
- *
- * Author:  andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/byteorder.h>
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-#ifdef CONFIG_8260_PCI9
-/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
-
-#define IDMA_XFER_BUF_SIZE 64	/* size of the IDMA transfer buffer */
-
-/* define a structure for the IDMA dpram usage */
-typedef struct idma_dpram_s {
-	idma_t pram;				/* IDMA parameter RAM */
-	u_char xfer_buf[IDMA_XFER_BUF_SIZE];	/* IDMA transfer buffer */
-	idma_bd_t bd;				/* buffer descriptor */
-} idma_dpram_t;
-
-/* define offsets relative to start of IDMA dpram */
-#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
-#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
-
-/* define globals */
-static volatile idma_dpram_t *idma_dpram;
-
-/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, 
- * where n is 1, 2, 3, or 4.  This selects the IDMA channel used for 
- * the PCI9 workaround.
- */
-#ifdef CONFIG_8260_PCI9_IDMA1
-#define IDMA_CHAN 0
-#define PROFF_IDMA PROFF_IDMA1_BASE
-#define IDMA_PAGE CPM_CR_IDMA1_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA2
-#define IDMA_CHAN 1
-#define PROFF_IDMA PROFF_IDMA2_BASE
-#define IDMA_PAGE CPM_CR_IDMA2_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA3
-#define IDMA_CHAN 2
-#define PROFF_IDMA PROFF_IDMA3_BASE
-#define IDMA_PAGE CPM_CR_IDMA3_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA4
-#define IDMA_CHAN 3
-#define PROFF_IDMA PROFF_IDMA4_BASE
-#define IDMA_PAGE CPM_CR_IDMA4_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
-#endif
-
-void idma_pci9_init(void)
-{
-	uint dpram_offset;
-	volatile idma_t *pram;
-	volatile im_idma_t *idma_reg;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	/* allocate IDMA dpram */
-	dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
-	idma_dpram = cpm_dpram_addr(dpram_offset); 
-
-	/* initialize the IDMA parameter RAM */
-	memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
-	pram = &idma_dpram->pram;
-	pram->ibase = dpram_offset + IDMA_BD_OFFSET;
-	pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
-	pram->ss_max = 32;
-	pram->dts = 32;
-
-	/* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
-	*((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
-
-	/* initialize the IDMA registers */
-	idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
-	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
-	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
-
-	printk(KERN_WARNING
-		"Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
-		IDMA_CHAN + 1);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The src address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The dst address must be a kernel virtual 
- * address.  The dst address is translated to a physical address via 
- * virt_to_phys().
- * The sinc argument specifies whether or not the source address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The destination address is always incremented since the 
- * destination is always host RAM.
- */
-static void 
-idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (sinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = virt_to_phys(dst);
-	bd->src = (uint) src;
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The dst address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The src address must be a kernel virtual 
- * address.  The src address is translated to a physical address via 
- * virt_to_phys().
- * The dinc argument specifies whether or not the dest address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The source address is always incremented since the 
- * source is always host RAM.
- */
-static void 
-idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (dinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = (uint) dst;
-	bd->src = virt_to_phys(src);
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
- * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
- * the unit_size is 4.
- */
-static void 
-idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	int i;
-	u8 *p;
-
-	idma_pci9_read(dst, src, bytes, unit_size, sinc);
-	switch(unit_size) {
-		case 2:
-			for (i = 0, p = dst; i < bytes; i += 2, p += 2)
-				swab16s((u16 *) p);
-			break;
-		case 4:
-			for (i = 0, p = dst; i < bytes; i += 4, p += 4)
-				swab32s((u32 *) p);
-			break;
-		default:
-			break;
-	}
-}
-EXPORT_SYMBOL(idma_pci9_init);
-EXPORT_SYMBOL(idma_pci9_read);
-EXPORT_SYMBOL(idma_pci9_read_le);
-
-static inline int is_pci_mem(unsigned long addr)
-{
-	if (addr >= M82xx_PCI_LOWER_MMIO &&
-		addr <= M82xx_PCI_UPPER_MMIO)
-		return 1;
-	if (addr >= M82xx_PCI_LOWER_MEM &&
-		addr <= M82xx_PCI_UPPER_MEM)
-		return 1;
-	return 0;
-}
-
-#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
-int readb(volatile unsigned char *addr)
-{
-	u8 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_8(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int readw(volatile unsigned short *addr)
-{
-	u16 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le16(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned readl(volatile unsigned *addr)
-{
-	u32 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le32(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-int inb(unsigned port)
-{
-	u8 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int inw(unsigned port)
-{
-	u16 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned inl(unsigned port)
-{
-	u32 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-void insb(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
-}
-
-void insw(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
-}
-
-void insl(unsigned port, void *buf, int nl)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
-}
-
-void *memcpy_fromio(void *dest, unsigned long src, size_t count)
-{
-	unsigned long pa = iopa((unsigned long) src);
-
-	if (is_pci_mem(pa))
-		idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
-	else
-		memcpy(dest, (void *)src, count);
-	return dest;
-}
-
-EXPORT_SYMBOL(readb);
-EXPORT_SYMBOL(readw);
-EXPORT_SYMBOL(readl);
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(memcpy_fromio);
-
-#endif	/* ifdef CONFIG_8260_PCI9 */
-
-/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
- * Copyright (C) 1998 Gabriel Paubert.
- */
-#ifndef CONFIG_8260_PCI9
-#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
-#else
-#define cfg_read(val, addr, type, op) \
-	idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
-#endif
-
-#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
-
-static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
-			break;
-		case 2:
-			cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
-			break;
-		case 4:
-			cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 *value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
-			break;
-		case 2:
-			cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
-			break;
-		case 4:
-			cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void
-setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	hose->ops = &indirect_pci_ops;
-	hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
-	hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
-}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
deleted file mode 100644
index b40583724de3..000000000000
--- a/arch/ppc/syslib/m8260_setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx and 8260 by Dan.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/ppc_sys.h>
-
-#include "cpm2_pic.h"
-
-unsigned char __res[sizeof(bd_t)];
-
-extern void pq2_find_bridges(void);
-extern void pq2pci_init_irq(void);
-extern void idma_pci9_init(void);
-
-/* Place-holder for board-specific init */
-void __attribute__ ((weak)) __init
-m82xx_board_setup(void)
-{
-}
-
-static void __init
-m8260_setup_arch(void)
-{
-	/* Print out Vendor and Machine info. */
-	printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
-
-	/* Reset the Communication Processor Module. */
-	cpm2_reset();
-#ifdef CONFIG_8260_PCI9
-	/* Initialise IDMA for PCI erratum workaround */
-	idma_pci9_init();
-#endif
-#ifdef CONFIG_PCI_8260
-	pq2_find_bridges();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-#endif
-
-	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
-			in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
-
-	m82xx_board_setup();
-}
-
-/* The decrementer counts at the system (internal) clock frequency
- * divided by four.
- */
-static void __init
-m8260_calibrate_decr(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-	int freq, divisor;
-
-	freq = binfo->bi_busfreq;
-        divisor = 4;
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-/* The 8260 has an internal 1-second timer update register that
- * we should use for this purpose.
- */
-static uint rtc_time;
-
-static int
-m8260_set_rtc_time(unsigned long time)
-{
-	rtc_time = time;
-
-	return(0);
-}
-
-static unsigned long
-m8260_get_rtc_time(void)
-{
-	/* Get time from the RTC.
-	*/
-	return((unsigned long)rtc_time);
-}
-
-#ifndef BOOTROM_RESTART_ADDR
-#warning "Using default BOOTROM_RESTART_ADDR!"
-#define BOOTROM_RESTART_ADDR	0xff000104
-#endif
-
-static void
-m8260_restart(char *cmd)
-{
-	extern void m8260_gorom(bd_t *bi, uint addr);
-	uint	startaddr;
-
-	/* Most boot roms have a warmstart as the second instruction
-	 * of the reset vector.  If that doesn't work for you, change this
-	 * or the reboot program to send a proper address.
-	 */
-	startaddr = BOOTROM_RESTART_ADDR;
-	if (cmd != NULL) {
-		if (!strncmp(cmd, "startaddr=", 10))
-			startaddr = simple_strtoul(&cmd[10], NULL, 0);
-	}
-
-	m8260_gorom((void*)__pa(__res), startaddr);
-}
-
-static void
-m8260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-m8260_power_off(void)
-{
-	m8260_halt();
-}
-
-static int
-m8260_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	seq_printf(m, "vendor\t\t: %s\n"
-		   "machine\t\t: %s\n"
-		   "\n"
-		   "mem size\t\t: 0x%08lx\n"
-		   "console baud\t\t: %ld\n"
-		   "\n"
-		   "core clock\t: %lu MHz\n"
-		   "CPM  clock\t: %lu MHz\n"
-		   "bus  clock\t: %lu MHz\n",
-		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
-		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
-		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
-	return 0;
-}
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 8260 family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8260_init_IRQ(void)
-{
-	cpm2_init_IRQ();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
-}
-
-/*
- * Same hack as 8xx
- */
-static unsigned long __init
-m8260_find_end_of_memory(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/* Map the IMMR, plus anything else we can cover
- * in that upper space according to the memory controller
- * chip select mapping.  Grab another bunch of space
- * below that for stuff we can't cover in the upper.
- */
-static void __init
-m8260_map_io(void)
-{
-	uint addr;
-
-	/* Map IMMR region to a 256MB BAT */
-	addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
-	io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
-
-	/* Map I/O region to a 256MB BAT */
-	io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
-}
-
-/* Place-holder for board-specific ppc_md hooking */
-void __attribute__ ((weak)) __init
-m82xx_board_init(void)
-{
-}
-
-/* Inputs:
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 ) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 ) {
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	ppc_md.setup_arch		= m8260_setup_arch;
-	ppc_md.show_cpuinfo		= m8260_show_cpuinfo;
-	ppc_md.init_IRQ			= m8260_init_IRQ;
-	ppc_md.get_irq			= cpm2_get_irq;
-
-	ppc_md.restart			= m8260_restart;
-	ppc_md.power_off		= m8260_power_off;
-	ppc_md.halt			= m8260_halt;
-
-	ppc_md.set_rtc_time		= m8260_set_rtc_time;
-	ppc_md.get_rtc_time		= m8260_get_rtc_time;
-	ppc_md.calibrate_decr		= m8260_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8260_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8260_map_io;
-
-	/* Call back for board-specific settings and overrides. */
-	m82xx_board_init();
-}
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
deleted file mode 100644
index 657a1c25a2ab..000000000000
--- a/arch/ppc/syslib/m82xx_pci.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-/*
- * Interrupt routing
- */
-
-static inline int
-pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	  A      B      C      D
-	 */
-	{
-		{ PIRQA, PIRQB, PIRQC, PIRQD },	/* IDSEL 22 - PCI slot 0 */
-		{ PIRQD, PIRQA, PIRQB, PIRQC },	/* IDSEL 23 - PCI slot 1 */
-		{ PIRQC, PIRQD, PIRQA, PIRQB },	/* IDSEL 24 - PCI slot 2 */
-	};
-
-	const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void
-pq2pci_mask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_unmask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_mask_and_ack(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_end_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-struct hw_interrupt_type pq2pci_ic = {
-	"PQ2 PCI",
-	NULL,
-	NULL,
-	pq2pci_unmask_irq,
-	pq2pci_mask_irq,
-	pq2pci_mask_and_ack,
-	pq2pci_end_irq,
-	0
-};
-
-static irqreturn_t
-pq2pci_irq_demux(int irq, void *dev_id)
-{
-	unsigned long stat, mask, pend;
-	int bit;
-
-	for(;;) {
-		stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
-		mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
-		pend = stat & ~mask & 0xf0000000;
-		if (!pend)
-			break;
-		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-			if (pend & 0x80000000)
-				__do_IRQ(NR_CPM_INTS + bit);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pq2pci_irqaction = {
-	.handler = pq2pci_irq_demux,
-	.flags 	 = IRQF_DISABLED,
-	.mask	 = CPU_MASK_NONE,
-	.name	 = "PQ2 PCI cascade",
-};
-
-
-void
-pq2pci_init_irq(void)
-{
-	int irq;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
-		irq_desc[irq].chip = &pq2pci_ic;
-
-	/* make PCI IRQ level sensitive */
-	immap->im_intctl.ic_siexr &=
-		~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
-
-	/* mask all PCI interrupts */
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
-
-	/* install the demultiplexer for the PCI cascade interrupt */
-	setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
-	return;
-}
-
-static int
-pq2pci_exclude_device(u_char bus, u_char devfn)
-{
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI bus configuration registers.
- */
-static void
-pq2ads_setup_pci(struct pci_controller *hose)
-{
-	__u32 val;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	bd_t* binfo = (bd_t*) __res;
-	u32 sccr = immap->im_clkrst.car_sccr;
-	uint pci_div,freq,time;
-		/* PCI int lowest prio */
-	/* Each 4 bits is a device bus request	and the MS 4bits
-	 is highest priority */
-	/* Bus                4bit value
-	   ---                ----------
-	   CPM high      	0b0000
-	   CPM middle           0b0001
-	   CPM low       	0b0010
-	   PCI request          0b0011
-	   Reserved      	0b0100
-	   Reserved      	0b0101
-	   Internal Core     	0b0110
-	   External Master 1 	0b0111
-	   External Master 2 	0b1000
-	   External Master 3 	0b1001
-	   The rest are reserved
-	 */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-	/* park bus on core */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
-	/*
-	 * Set up master windows that allow the CPU to access PCI space. These
-	 * windows are set up using the two SIU PCIBR registers.
-	 */
-
-	immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
-	immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
-
-#ifdef M82xx_PCI_SEC_WND_SIZE
-	immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
-	immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
-#endif
-
-	/* Enable PCI  */
-	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
-	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-	time = (int)66666666/freq;
-
-	/* due to PCI Local Bus spec, some devices needs to wait such a long
-	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
-	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
-	(time==1) ? "0.5 seconds":"1 second" );
-
-	{
-		int i;
-		for(i=0;i<(500*time);i++)
-			udelay(1000);
-	}
-
-	/* setup ATU registers */
-	immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
-				((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
-
-	/* Set-up non-prefetchable window */
-	immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
-
-	/* Set-up prefetchable window */
-	immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
-		(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
-
- 	/* Inbound transactions from PCI memory space */
-	immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
-					((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
-	immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
-	immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
-
-	/* park bus on PCI */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-	/* Enable bus mastering and inbound memory transactions */
-	early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
-	val &= 0xffff0000;
-	val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
-	early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
-
-}
-
-void __init pq2_find_bridges(void)
-{
-	extern int pci_assign_all_buses;
-	struct pci_controller * hose;
-	int host_bridge;
-
-	pci_assign_all_buses = 1;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-
-	hose->first_busno = 0;
-	hose->bus_offset = 0;
-	hose->last_busno = 0xff;
-
-	setup_m8260_indirect_pci(hose,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-	/* Make sure it is a supported bridge */
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				PCI_VENDOR_ID,
-				&host_bridge);
-	switch (host_bridge) {
-		case PCI_DEVICE_ID_MPC8265:
-			break;
-		case PCI_DEVICE_ID_MPC8272:
-			break;
-		default:
-			printk("Attempting to use unrecognized host bridge ID"
-				" 0x%08x.\n", host_bridge);
-			break;
-	}
-
-	pq2ads_setup_pci(hose);
-
-	hose->io_space.start =	M82xx_PCI_LOWER_IO;
-	hose->io_space.end = M82xx_PCI_UPPER_IO;
-	hose->mem_space.start = M82xx_PCI_LOWER_MEM;
-	hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
-	hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
-
-	isa_io_base =
-	(unsigned long) ioremap(M82xx_PCI_IO_BASE,
-					M82xx_PCI_IO_SIZE);
-	hose->io_base_virt = (void *) isa_io_base;
-
-	/* setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			M82xx_PCI_LOWER_MEM,
-			M82xx_PCI_UPPER_MEM,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			M82xx_PCI_LOWER_MMIO,
-			M82xx_PCI_UPPER_MMIO,
-			IORESOURCE_MEM, "PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			M82xx_PCI_LOWER_IO,
-			M82xx_PCI_UPPER_IO,
-			IORESOURCE_IO | 1, "PCI I/O");
-
-	ppc_md.pci_exclude_device = pq2pci_exclude_device;
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_map_irq = pq2pci_map_irq;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-
-}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
deleted file mode 100644
index 924f73f8e595..000000000000
--- a/arch/ppc/syslib/m82xx_pci.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#ifndef _PPC_KERNEL_M82XX_PCI_H
-#define _PPC_KERNEL_M82XX_PCI_H
-
-#include <asm/m8260_pci.h>
-/*
- *   Local->PCI map (from CPU)                             controlled by
- *   MPC826x master window
- *
- *   0xF6000000 - 0xF7FFFFFF    IO space
- *   0x80000000 - 0xBFFFFFFF    CPU2PCI memory space       PCIBR0
- *
- *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
- *   0xA0000000 - 0xBFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
- *   0xF6000000 - 0xF7FFFFFF    32-bit PCI IO              (Outbound ATU #3)
- *
- *   PCI->Local map (from PCI)
- *   MPC826x slave window                                  controlled by
- *
- *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
-#define M82xx_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_BUS		(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-
-#ifndef M82xx_PCI_LOWER_MEM
-#define M82xx_PCI_LOWER_MEM		0x80000000
-#define M82xx_PCI_UPPER_MEM		0x9fffffff
-#define M82xx_PCI_MEM_OFFSET		0x00000000
-#define M82xx_PCI_MEM_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_MMIO
-#define M82xx_PCI_LOWER_MMIO		0xa0000000
-#define M82xx_PCI_UPPER_MMIO		0xafffffff
-#define M82xx_PCI_MMIO_OFFSET		0x00000000
-#define M82xx_PCI_MMIO_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_IO
-#define M82xx_PCI_LOWER_IO		0x00000000
-#define M82xx_PCI_UPPER_IO		0x01ffffff
-#define M82xx_PCI_IO_BASE		0xf6000000
-#define M82xx_PCI_IO_SIZE		0x02000000
-#endif
-
-#ifndef M82xx_PCI_PRIM_WND_SIZE
-#define M82xx_PCI_PRIM_WND_SIZE 	~(M82xx_PCI_IO_SIZE - 1U)
-#define M82xx_PCI_PRIM_WND_BASE		(M82xx_PCI_IO_BASE)
-#endif
-
-#ifndef M82xx_PCI_SEC_WND_SIZE
-#define M82xx_PCI_SEC_WND_SIZE 		~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
-#define M82xx_PCI_SEC_WND_BASE 		(M82xx_PCI_LOWER_MEM)
-#endif
-
-#ifndef POTA_ADDR_SHIFT
-#define POTA_ADDR_SHIFT		12
-#endif
-
-#ifndef PITA_ADDR_SHIFT
-#define PITA_ADDR_SHIFT		12
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
-					u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
deleted file mode 100644
index 18da720fc1b0..000000000000
--- a/arch/ppc/syslib/m8xx_setup.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx by Dan.
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
-#include <asm/mmu.h>
-#include <asm/reg.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/xmon.h>
-#include <asm/ppc_sys.h>
-
-#include "ppc8xx_pic.h"
-
-#ifdef CONFIG_MTD_PHYSMAP
-#define MPC8xxADS_BANK_WIDTH 4
-#endif
-
-#define MPC8xxADS_U_BOOT_SIZE          0x80000
-#define MPC8xxADS_FREE_AREA_OFFSET     MPC8xxADS_U_BOOT_SIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
- /*
-   NOTE: bank width and interleave relative to the installed flash
-   should have been chosen within MTD_CFI_GEOMETRY options.
- */
-static struct mtd_partition mpc8xxads_partitions[] = {
-	{
-		.name = "bootloader",
-		.size = MPC8xxADS_U_BOOT_SIZE,
-		.offset = 0,
-		.mask_flags   = MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name = "User FS",
-		.offset = MPC8xxADS_FREE_AREA_OFFSET
-	}
-};
-
-#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
-
-#endif
-
-static int m8xx_set_rtc_time(unsigned long time);
-static unsigned long m8xx_get_rtc_time(void);
-void m8xx_calibrate_decr(void);
-
-unsigned char __res[sizeof(bd_t)];
-
-extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset(void);
-extern void m8xx_wdt_handler_install(bd_t *bp);
-extern void rpxfb_alloc_pages(void);
-extern void cpm_interrupt_init(void);
-
-void __attribute__ ((weak))
-board_init(void)
-{
-}
-
-void __init
-m8xx_setup_arch(void)
-{
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-	bd_t *binfo = (bd_t *)__res;
-#endif
-
-	/* Reset the Communication Processor Module.
-	*/
-	m8xx_cpm_reset();
-
-#ifdef CONFIG_FB_RPX
-	rpxfb_alloc_pages();
-#endif
-
-#ifdef notdef
-	ROOT_DEV = Root_HDA1; /* hda1 */
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-#if 0
-	ROOT_DEV = Root_FD0; /* floppy */
-	rd_prompt = 1;
-	rd_doload = 1;
-	rd_image_start = 0;
-#endif
-#if 0	/* XXX this may need to be updated for the new bootmem stuff,
-	   or possibly just deleted (see set_phys_avail() in init.c).
-	   - paulus. */
-	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
-	if ( initrd_start )
-	{
-		if (initrd_end > *memory_end_p)
-		{
-			printk("initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       initrd_end,*memory_end_p);
-			initrd_start = 0;
-		}
-	}
-#endif
-#endif
-
-	board_init();
-}
-
-void
-abort(void)
-{
-#ifdef CONFIG_XMON
-	xmon(0);
-#endif
-	machine_restart(NULL);
-
-	/* not reached */
-	for (;;);
-}
-
-/* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
-{
-	printk ("timebase_interrupt()\n");
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "tbint",
-};
-
-/* per-board overridable init_internal_rtc() function. */
-void __init __attribute__ ((weak))
-init_internal_rtc(void)
-{
-	/* Disable the RTC one second and alarm interrupts. */
-	clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
-
-	/* Enable the RTC */
-	setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
-
-}
-
-/* The decrementer counts at the system (internal) clock frequency divided by
- * sixteen, or external oscillator divided by four.  We force the processor
- * to use system clock divided by sixteen.
- */
-void __init m8xx_calibrate_decr(void)
-{
-	bd_t	*binfo = (bd_t *)__res;
-	int freq, fp, divisor;
-
-	/* Unlock the SCCR. */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
-
-	/* Force all 8xx processors to use divide by 16 processor clock. */
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000);
-	/* Processor frequency is MHz.
-	 * The value 'fp' is the number of decrementer ticks per second.
-	 */
-	fp = binfo->bi_intfreq / 16;
-	freq = fp*60;	/* try to make freq/1e6 an integer */
-        divisor = 60;
-        printk("Decrementer Frequency = %d/%d\n", freq, divisor);
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
-	/* Perform some more timer/timebase initialization.  This used
-	 * to be done elsewhere, but other changes caused it to get
-	 * called more than once....that is a bad thing.
-	 *
-	 * First, unlock all of the registers we are going to modify.
-	 * To protect them from corruption during power down, registers
-	 * that are maintained by keep alive power are "locked".  To
-	 * modify these registers we have to write the key value to
-	 * the key location associated with the register.
-	 * Some boards power up with these unlocked, while others
-	 * are locked.  Writing anything (including the unlock code?)
-	 * to the unlocked registers will lock them again.  So, here
-	 * we guarantee the registers are locked, then we unlock them
-	 * for our use.
-	 */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
-
-	init_internal_rtc();
-
-	/* Enabling the decrementer also enables the timebase interrupts
-	 * (or from the other point of view, to get decrementer interrupts
-	 * we have to enable the timebase).  The decrementer interrupt
-	 * is wired into the vector table, nothing to do here for that.
-	 */
-	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
-
-	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
-		panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
-	/* Install watchdog timer handler early because it might be
-	 * already enabled by the bootloader
-	 */
-	m8xx_wdt_handler_install(binfo);
-#endif
-}
-
-/* The RTC on the MPC8xx is an internal register.
- * We want to protect this during power down, so we need to unlock,
- * modify, and re-lock.
- */
-static int
-m8xx_set_rtc_time(unsigned long time)
-{
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
-	return(0);
-}
-
-static unsigned long
-m8xx_get_rtc_time(void)
-{
-	/* Get time from the RTC. */
-	return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
-}
-
-static void
-m8xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080);
-	/* Clear the ME bit in MSR to cause checkstop on machine check
-	*/
-	mtmsr(mfmsr() & ~0x1000);
-
-	dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
-	printk("Restart failed\n");
-	while(1);
-}
-
-static void
-m8xx_power_off(void)
-{
-   m8xx_restart(NULL);
-}
-
-static void
-m8xx_halt(void)
-{
-   m8xx_restart(NULL);
-}
-
-
-static int
-m8xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	bd_t	*bp;
-
-	bp = (bd_t *)__res;
-
-	seq_printf(m, "clock\t\t: %uMHz\n"
-		   "bus clock\t: %uMHz\n",
-		   bp->bi_intfreq / 1000000,
-		   bp->bi_busfreq / 1000000);
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct irqaction mbx_i8259_irqaction = {
-	.handler = mbx_i8259_action,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 cascade",
-};
-#endif
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 82xx family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8xx_init_IRQ(void)
-{
-	int i;
-
-	for (i = SIU_IRQ_OFFSET ; i < SIU_IRQ_OFFSET + NR_SIU_INTS ; i++)
-		irq_desc[i].chip = &ppc8xx_pic;
-
-	cpm_interrupt_init();
-
-#if defined(CONFIG_PCI)
-	for (i = I8259_IRQ_OFFSET ; i < I8259_IRQ_OFFSET + NR_8259_INTS ; i++)
-		irq_desc[i].chip = &i8259_pic;
-
-	i8259_pic_irq_offset = I8259_IRQ_OFFSET;
-	i8259_init(0);
-
-	/* The i8259 cascade interrupt must be level sensitive. */
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT));
-	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
-		enable_irq(ISA_BRIDGE_INT);
-#endif	/* CONFIG_PCI */
-}
-
-/* -------------------------------------------------------------------- */
-
-/*
- * This is a big hack right now, but it may turn into something real
- * someday.
- *
- * For the 8xx boards (at this time anyway), there is nothing to initialize
- * associated the PROM.  Rather than include all of the prom.c
- * functions in the image just to get prom_init, all we really need right
- * now is the initialization of the physical memory region.
- */
-static unsigned long __init
-m8xx_find_end_of_memory(void)
-{
-	bd_t	*binfo;
-	extern unsigned char __res[];
-
-	binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/*
- * Now map in some of the I/O space that is generically needed
- * or shared with multiple devices.
- * All of this fits into the same 4Mbyte region, so it only
- * requires one page table page.  (or at least it used to  -- paulus)
- */
-static void __init
-m8xx_map_io(void)
-{
-        io_block_mapping(IMAP_ADDR, IMAP_ADDR, IMAP_SIZE, _PAGE_IO);
-#ifdef CONFIG_MBX
-        io_block_mapping(NVRAM_ADDR, NVRAM_ADDR, NVRAM_SIZE, _PAGE_IO);
-        io_block_mapping(MBX_CSR_ADDR, MBX_CSR_ADDR, MBX_CSR_SIZE, _PAGE_IO);
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-
-	/* Map some of the PCI/ISA I/O space to get the IDE interface.
-	*/
-        io_block_mapping(PCI_ISA_IO_ADDR, PCI_ISA_IO_ADDR, 0x4000, _PAGE_IO);
-        io_block_mapping(PCI_IDE_ADDR, PCI_IDE_ADDR, 0x4000, _PAGE_IO);
-#endif
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	io_block_mapping(RPX_CSR_ADDR, RPX_CSR_ADDR, RPX_CSR_SIZE, _PAGE_IO);
-#if !defined(CONFIG_PCI)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-#endif
-#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
-	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_FADS
-	io_block_mapping(BCSR_ADDR, BCSR_ADDR, BCSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_PCI
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-#endif
-#if defined(CONFIG_NETTA)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_PCI
-	m8xx_setup_pci_ptrs();
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 )
-	{
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	identify_ppc_sys_by_name(BOARD_CHIP_NAME);
-
-	ppc_md.setup_arch		= m8xx_setup_arch;
-	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
-	ppc_md.init_IRQ			= m8xx_init_IRQ;
-	ppc_md.get_irq			= m8xx_get_irq;
-	ppc_md.init			= NULL;
-
-	ppc_md.restart			= m8xx_restart;
-	ppc_md.power_off		= m8xx_power_off;
-	ppc_md.halt			= m8xx_halt;
-
-	ppc_md.time_init		= NULL;
-	ppc_md.set_rtc_time		= m8xx_set_rtc_time;
-	ppc_md.get_rtc_time		= m8xx_get_rtc_time;
-	ppc_md.calibrate_decr		= m8xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8xx_map_io;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
deleted file mode 100644
index fffac8cbeb51..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * m8xx_wdt.c - MPC8xx watchdog driver
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <syslib/m8xx_wdt.h>
-
-static int wdt_timeout;
-int m8xx_has_internal_rtc = 0;
-
-static irqreturn_t m8xx_wdt_interrupt(int, void *);
-static struct irqaction m8xx_wdt_irqaction = {
-	.handler = m8xx_wdt_interrupt,
-	.name = "watchdog",
-};
-
-void m8xx_wdt_reset(void)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	out_be16(&imap->im_siu_conf.sc_swsr, 0x556c);	/* write magic1 */
-	out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39);	/* write magic2 */
-}
-
-static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	m8xx_wdt_reset();
-
-	setbits16(&imap->im_sit.sit_piscr, PISCR_PS);
-	return IRQ_HANDLED;
-}
-
-#define SYPCR_SWP 0x1
-#define SYPCR_SWE 0x4
-
-
-void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo)
-{
-	u32 pitc;
-	u32 pitrtclk;
-
-	/*
-	 * Fire trigger if half of the wdt ticked down 
-	 */
-
-	if (imap->im_sit.sit_rtcsc & RTCSC_38K)
-		pitrtclk = 9600;
-	else
-		pitrtclk = 8192;
-
-	if ((wdt_timeout) > (UINT_MAX / pitrtclk))
-		pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2;
-	else
-		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
-
-	out_be32(&imap->im_sit.sit_pitc, pitc << 16);
-
-	out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
-
-	if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
-		panic("m8xx_wdt: error setting up the watchdog irq!");
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
-
-}
-
-static void m8xx_wdt_timer_func(unsigned long data);
-
-static struct timer_list m8xx_wdt_timer =
-	TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0);
-
-void m8xx_wdt_stop_timer(void)
-{
-	del_timer(&m8xx_wdt_timer);
-}
-
-void m8xx_wdt_install_timer(void)
-{
-	m8xx_wdt_timer.expires = jiffies + (HZ/2);
-	add_timer(&m8xx_wdt_timer);
-}
-
-static void m8xx_wdt_timer_func(unsigned long data)
-{
-	m8xx_wdt_reset();
-	m8xx_wdt_install_timer();
-}
-
-void __init m8xx_wdt_handler_install(bd_t * binfo)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-	u32 sypcr;
-
-	sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
-
-	if (!(sypcr & SYPCR_SWE)) {
-		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
-		       sypcr);
-		return;
-	}
-
-	m8xx_wdt_reset();
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
-	       (sypcr >> 16), sypcr & SYPCR_SWP);
-
-	wdt_timeout = (sypcr >> 16) & 0xFFFF;
-
-	if (!wdt_timeout)
-		wdt_timeout = 0xFFFF;
-
-	if (sypcr & SYPCR_SWP)
-		wdt_timeout *= 2048;
-
-	m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE;
-
-	/* if the internal RTC is off use a kernel timer */
-	if (!m8xx_has_internal_rtc) {
-		if (wdt_timeout < (binfo->bi_intfreq/HZ))
-			printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n");
-		m8xx_wdt_install_timer();
-	} else
-		m8xx_wdt_install_irq(imap, binfo);
-
-	wdt_timeout /= binfo->bi_intfreq;
-}
-
-int m8xx_wdt_get_timeout(void)
-{
-	return wdt_timeout;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
deleted file mode 100644
index e75835f0012b..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_SYSLIB_M8XX_WDT_H
-#define _PPC_SYSLIB_M8XX_WDT_H
-
-extern int m8xx_has_internal_rtc;
-
-extern void m8xx_wdt_handler_install(bd_t * binfo);
-extern int m8xx_wdt_get_timeout(void);
-extern void m8xx_wdt_reset(void);
-extern void m8xx_wdt_install_timer(void);
-extern void m8xx_wdt_stop_timer(void);
-
-#endif				/* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
deleted file mode 100644
index 437a294527a9..000000000000
--- a/arch/ppc/syslib/mpc10x_common.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/mpc10x.h>
-#include <asm/ppc_sys.h>
-
-#ifdef CONFIG_MPC10X_OPENPIC
-#ifdef CONFIG_EPIC_SERIAL_MODE
-#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
-#else
-#define EPIC_IRQ_BASE 5
-#endif
-#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
-#else
-#define MPC10X_I2C_IRQ -1
-#define MPC10X_DMA0_IRQ -1
-#define MPC10X_DMA1_IRQ -1
-#define MPC10X_UART0_IRQ -1
-#define MPC10X_UART1_IRQ -1
-#endif
-
-static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
-	.device_flags		= 0,
-};
-
-static struct plat_serial8250_port serial_plat_uart0[] = {
-	[0] = {
-		.mapbase	= 0x4500,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-static struct plat_serial8250_port serial_plat_uart1[] = {
-	[0] = {
-		.mapbase	= 0x4600,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC10X_IIC1] = {
-		.name 	= "fsl-i2c",
-		.id	= 1,
-		.dev.platform_data = &mpc10x_i2c_pdata,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_I2C_OFFSET,
-				.end	= MPC10X_EUMB_I2C_OFFSET +
-		                            MPC10X_EUMB_I2C_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags 	= IORESOURCE_IRQ
-			},
-		},
-	},
-	[MPC10X_DMA0] = {
-		.name	= "fsl-dma",
-		.id	= 0,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_DMA_OFFSET + 0x10,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_UART0] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data = serial_plat_uart0,
-	},
-	[MPC10X_UART1] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev.platform_data = serial_plat_uart1,
-	},
-
-};
-
-/* We use the PCI ID to match on */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name 	= "8245",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8245,
-		.num_devices	= 5,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1,
-		},
-	},
-	{
-		.ppc_sys_name 	= "8240",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8240,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{
-		.ppc_sys_name	= "107",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_107,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{       /* default match */
-		.ppc_sys_name   = "",
-		.mask           = 0x00000000,
-		.value          = 0x00000000,
-	},
-};
-
-/*
- * mach_mpc10x_fixup: This function enables DUART mode if it detects
- * if it detects two UARTS in the platform device entries.
- */
-static int __init mach_mpc10x_fixup(struct platform_device *pdev)
-{
-	if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
-		writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
-				serial_plat_uart1[0].membase + 0x11);
-	return 0;
-}
-
-static int __init mach_mpc10x_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc10x_fixup;
-	return 0;
-}
-postcore_initcall(mach_mpc10x_init);
-
-/* Set resources to match bridge memory map */
-void __init
-mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
-{
-
-	switch (map) {
-		case MPC10X_MEM_MAP_A:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x3f7fffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0xc0000000,
-					0xfeffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		case MPC10X_MEM_MAP_B:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x00bfffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0x80000000,
-					0xfcffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		default:
-			printk("mpc10x_bridge_set_resources: "
-					"Invalid map specified\n");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-	}
-}
-
-/*
- * Do some initialization and put the EUMB registers at the specified address
- * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
- *
- * The EPIC is not on the 106, only the 8240 and 107.
- */
-int __init
-mpc10x_bridge_init(struct pci_controller *hose,
-		   uint current_map,
-		   uint new_map,
-		   uint phys_eumb_base)
-{
-	int	host_bridge, picr1, picr1_bit, i;
-	ulong	pci_config_addr, pci_config_data;
-	u_char	pir, byte;
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
-
-	/* Set up for current map so we can get at config regs */
-	switch (current_map) {
-		case MPC10X_MEM_MAP_A:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPA_CNFG_ADDR,
-					   MPC10X_MAPA_CNFG_DATA);
-			break;
-		case MPC10X_MEM_MAP_B:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPB_CNFG_ADDR,
-					   MPC10X_MAPB_CNFG_DATA);
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid current map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-			return -1;
-	}
-
-	/* Make sure it's a supported bridge */
-	early_read_config_dword(hose,
-			        0,
-			        PCI_DEVFN(0,0),
-			        PCI_VENDOR_ID,
-			        &host_bridge);
-
-	switch (host_bridge) {
-		case MPC10X_BRIDGE_106:
-		case MPC10X_BRIDGE_8240:
-		case MPC10X_BRIDGE_107:
-		case MPC10X_BRIDGE_8245:
-			break;
-		default:
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit2", 0x100);
-			return -1;
-	}
-
-	switch (new_map) {
-		case MPC10X_MEM_MAP_A:
-			MPC10X_SETUP_HOSE(hose, A);
-			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPA_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
-			break;
-		case MPC10X_MEM_MAP_B:
-			MPC10X_SETUP_HOSE(hose, B);
-			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPB_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid new map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit3", 0x100);
-			return -1;
-	}
-
-	/* Make bridge use the 'new_map', if not already usng it */
-	if (current_map != new_map) {
-		early_read_config_dword(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_PICR1_REG,
-					&picr1);
-
-		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
-			 picr1_bit;
-
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_PICR1_REG,
-					 picr1);
-
-		asm volatile("sync");
-
-		/* Undo old mappings & map in new cfg data/addr regs */
-		iounmap((void *)hose->cfg_addr);
-		iounmap((void *)hose->cfg_data);
-
-		setup_indirect_pci(hose,
-				   pci_config_addr,
-				   pci_config_data);
-	}
-
-	/* Setup resources to match map */
-	mpc10x_bridge_set_resources(new_map, hose);
-
-	/*
-	 * Want processor accesses of 0xFDxxxxxx to be mapped
-	 * to PCI memory space at 0x00000000.  Do not want
-	 * host bridge to respond to PCI memory accesses of
-	 * 0xFDxxxxxx.  Do not want host bridge to respond
-	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
-	 * want processor accesses from 0x000A0000-0x000BFFFF
-	 * to be forwarded to system memory.
-	 *
-	 * Only valid if not in agent mode and using MAP B.
-	 */
-	if (new_map == MPC10X_MEM_MAP_B) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_MAPB_OPTIONS_REG,
-				       &byte);
-
-		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
-			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
-			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
-
-		if (host_bridge != MPC10X_BRIDGE_106) {
-			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
-		}
-
-		early_write_config_byte(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_MAPB_OPTIONS_REG,
-					byte);
-	}
-
-	if (host_bridge != MPC10X_BRIDGE_106) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_PIR_REG,
-				       &pir);
-
-		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
-			printk("Host bridge in Agent mode\n");
-			/* Read or Set LMBAR & PCSRBAR? */
-		}
-
-		/* Set base addr of the 8240/107 EUMB.  */
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_EUMBBAR,
-					 phys_eumb_base);
-#ifdef CONFIG_MPC10X_OPENPIC
-		/* Map EPIC register part of EUMB into vitual memory  - PCORE
-		   uses an i8259 instead of EPIC. */
-		OpenPIC_Addr =
-			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
-				MPC10X_EUMB_EPIC_SIZE);
-#endif
-	}
-
-#ifdef CONFIG_MPC10X_STORE_GATHERING
-	mpc10x_enable_store_gathering(hose);
-#else
-	mpc10x_disable_store_gathering(hose);
-#endif
-
-	/* setup platform devices for MPC10x bridges */
-	identify_ppc_sys_by_id (host_bridge);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
-			phys_eumb_base);
-	}
-
-	/* IRQs are determined at runtime */
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
-
-	serial_plat_uart0[0].mapbase += phys_eumb_base;
-	serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
-	serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100);
-
-	serial_plat_uart1[0].mapbase += phys_eumb_base;
-	serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
-	serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100);
-
-	/*
-	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
-	 * PCI reads may return stale data so turn off.
-	 */
-	if ((host_bridge == MPC10X_BRIDGE_8240)
-		|| (host_bridge == MPC10X_BRIDGE_8245)
-		|| (host_bridge == MPC10X_BRIDGE_107)) {
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, &picr1);
-
-		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, picr1);
-	}
-
-	/*
-	 * 8241/8245 erratum 28: PCI reads from local memory may return
-	 * stale data.  Workaround by setting PICR2[0] to disable copyback
-	 * optimization.  Oddly, the latest available user manual for the
-	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
-	 */
-	if (host_bridge == MPC10X_BRIDGE_8245) {
-		u32	picr2;
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR2_REG, &picr2);
-
-		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			 MPC10X_CFG_PICR2_REG, picr2);
-	}
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
-	return 0;
-}
-
-/*
- * Need to make our own PCI config space access macros because
- * mpc10x_get_mem_size() is called before the data structures are set up for
- * the 'early_xxx' and 'indirect_xxx' routines to work.
- * Assumes bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
-#if 0	/* Not used */
-MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
-MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
-MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
-MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
-#endif
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.
- */
-unsigned long __init
-mpc10x_get_mem_size(uint mem_map)
-{
-	uint			*config_addr, *config_data, val;
-	ulong			start, end, total, offset;
-	int			i;
-	u_char			bank_enables;
-
-	switch (mem_map) {
-		case MPC10X_MEM_MAP_A:
-			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
-			break;
-		case MPC10X_MEM_MAP_B:
-			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
-			break;
-		default:
-			return 0;
-	}
-
-	mpc10x_read_config_byte(config_addr,
-				config_data,
-				PCI_DEVFN(0,0),
-			        MPC10X_MCTLR_MEM_BANK_ENABLES,
-			        &bank_enables);
-
-	total = 0;
-
-	for (i=0; i<8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
-
-int __init
-mpc10x_enable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-int __init
-mpc10x_disable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-#ifdef CONFIG_MPC10X_OPENPIC
-void __init mpc10x_set_openpic(void)
-{
-	/* Map external IRQs */
-	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
-	/* Skip reserved space and map i2c and DMA Ch[01] */
-	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
-	/* Skip reserved space and map Message Unit Interrupt (I2O) */
-	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
-	/* Skip reserved space and map Serial Interrupts */
-	openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
-
-	openpic_init(NUM_8259_INTERRUPTS);
-}
-#endif
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
deleted file mode 100644
index 7487539a4e92..000000000000
--- a/arch/ppc/syslib/mpc52xx_devices.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Freescale MPC52xx device descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/fsl_devices.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-
-
-static u64 mpc52xx_dma_mask = 0xffffffffULL;
-
-static struct fsl_i2c_platform_data mpc52xx_fsl_i2c_pdata = {
-	.device_flags = FSL_I2C_DEV_CLOCK_5200,
-};
-
-
-/* We use relative offsets for IORESOURCE_MEM to be independent from the
- * MBAR location at compile time
- */
-
-/* TODO Add the BestComm initiator channel to the device definitions,
-   possibly using IORESOURCE_DMA. But that's when BestComm is ready ... */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC52xx_MSCAN1] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0900,
-				.end	= 0x097f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN1_IRQ,
-				.end	= MPC52xx_MSCAN1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_MSCAN2] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0980,
-				.end	= 0x09ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN2_IRQ,
-				.end	= MPC52xx_MSCAN2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_SPI] = {
-		.name		= "mpc52xx-spi",
-		.id		= -1,
-		.num_resources	= 3,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x0f00,
-				.end	= 0x0f1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "modf",
-				.start	= MPC52xx_SPI_MODF_IRQ,
-				.end	= MPC52xx_SPI_MODF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "spif",
-				.start	= MPC52xx_SPI_SPIF_IRQ,
-				.end	= MPC52xx_SPI_SPIF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_USB] = {
-		.name		= "ppc-soc-ohci",
-		.id		= -1,
-		.num_resources	= 2,
-		.dev.dma_mask	= &mpc52xx_dma_mask,
-		.dev.coherent_dma_mask = 0xffffffffULL,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1000,
-				.end	= 0x10ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_USB_IRQ,
-				.end	= MPC52xx_USB_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_BDLC] = {
-		.name		= "mpc52xx-bdlc",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1300,
-				.end	= 0x130f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_BDLC_IRQ,
-				.end	= MPC52xx_BDLC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC1] = {
-		.name		= "mpc52xx-psc",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2000,
-				.end	= 0x209f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC1_IRQ,
-				.end	= MPC52xx_PSC1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC2] = {
-		.name		= "mpc52xx-psc",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2200,
-				.end	= 0x229f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC2_IRQ,
-				.end	= MPC52xx_PSC2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC3] = {
-		.name		= "mpc52xx-psc",
-		.id		= 2,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2400,
-				.end	= 0x249f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC3_IRQ,
-				.end	= MPC52xx_PSC3_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC4] = {
-		.name		= "mpc52xx-psc",
-		.id		= 3,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2600,
-				.end	= 0x269f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC4_IRQ,
-				.end	= MPC52xx_PSC4_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC5] = {
-		.name		= "mpc52xx-psc",
-		.id		= 4,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2800,
-				.end	= 0x289f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC5_IRQ,
-				.end	= MPC52xx_PSC5_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC6] = {
-		.name		= "mpc52xx-psc",
-		.id		= 5,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2c00,
-				.end	= 0x2c9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC6_IRQ,
-				.end	= MPC52xx_PSC6_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_FEC] = {
-		.name		= "mpc52xx-fec",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3000,
-				.end	= 0x33ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_FEC_IRQ,
-				.end	= MPC52xx_FEC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_ATA] = {
-		.name		= "mpc52xx-ata",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3a00,
-				.end	= 0x3aff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_ATA_IRQ,
-				.end	= MPC52xx_ATA_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C1] = {
-		.name		= "fsl-i2c",
-		.id		= 0,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d00,
-				.end	= 0x3d1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C1_IRQ,
-				.end	= MPC52xx_I2C1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C2] = {
-		.name		= "fsl-i2c",
-		.id		= 1,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d40,
-				.end	= 0x3d5f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C2_IRQ,
-				.end	= MPC52xx_I2C2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-};
-
-
-static int __init mach_mpc52xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, MPC52xx_MBAR);
-	return 0;
-}
-
-static int __init mach_mpc52xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc52xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc52xx_init);
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
deleted file mode 100644
index 20a0eac0dc3a..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * PCI code for the Freescale MPC52xx embedded CPU.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <asm/pci.h>
-
-#include <asm/mpc52xx.h>
-#include "mpc52xx_pci.h"
-
-#include <asm/delay.h>
-#include <asm/machdep.h>
-
-
-/* This macro is defined to activate the workaround for the bug
-   435 of the MPC5200 (L25R). With it activated, we don't do any
-   32 bits configuration access during type-1 cycles */
-#define MPC5200_BUG_435_WORKAROUND
-
-
-static int
-mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				value = in_8(((u8 __iomem *)hose->cfg_data) + (offset & 3));
-				break;
-			case 2:
-				value = in_le16(((u16 __iomem *)hose->cfg_data) + ((offset>>1) & 1));
-				break;
-
-			default:
-				value = in_le16((u16 __iomem *)hose->cfg_data) |
-					(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
-				break;
-		}
-	}
-	else
-#endif
-	{
-		value = in_le32(hose->cfg_data);
-
-		if (len != 4) {
-			value >>= ((offset & 0x3) << 3);
-			value &= 0xffffffff >> (32 - (len << 3));
-		}
-	}
-
-	*val = value;
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value, mask;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				out_8(((u8 __iomem *)hose->cfg_data) +
-					(offset & 3), val);
-				break;
-			case 2:
-				out_le16(((u16 __iomem *)hose->cfg_data) +
-					((offset>>1) & 1), val);
-				break;
-
-			default:
-				out_le16((u16 __iomem *)hose->cfg_data,
-					(u16)val);
-				out_le16(((u16 __iomem *)hose->cfg_data) + 1,
-					(u16)(val>>16));
-				break;
-		}
-	}
-	else
-#endif
-	{
-		if (len != 4) {
-			value = in_le32(hose->cfg_data);
-
-			offset = (offset & 0x3) << 3;
-			mask = (0xffffffff >> (32 - (len << 3)));
-			mask <<= offset;
-
-			value &= ~mask;
-			val = value | ((val << offset) & mask);
-		}
-
-		out_le32(hose->cfg_data, val);
-	}
-	mb();
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mpc52xx_pci_ops = {
-	.read  = mpc52xx_pci_read_config,
-	.write = mpc52xx_pci_write_config
-};
-
-
-static void __init
-mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs)
-{
-	u32 tmp;
-
-	/* Setup control regs */
-	tmp = in_be32(&pci_regs->scr);
-	tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	out_be32(&pci_regs->scr, tmp);
-
-	/* Setup windows */
-	out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MEM_START,
-		MPC52xx_PCI_MEM_SIZE ));
-
-	out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MMIO_START,
-		MPC52xx_PCI_MMIO_SIZE ));
-
-	out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_IO_BASE,
-		MPC52xx_PCI_IO_START,
-		MPC52xx_PCI_IO_SIZE ));
-
-	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw0btar */
-		  MPC52xx_PCI_IWCR_READ_MULTI |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw1btar */
-		  MPC52xx_PCI_IWCR_READ |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw2btar */
-		  MPC52xx_PCI_IWCR_IO )
-	));
-
-
-	out_be32(&pci_regs->tbatr0,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
-	out_be32(&pci_regs->tbatr1,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
-
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
-
-	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
-	/* Not necessary and can be a bad thing if for example the bootloader
-	   is displaying a splash screen or ... Just left here for
-	   documentation purpose if anyone need it */
-	tmp = in_be32(&pci_regs->gscr);
-#if 0
-	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
-	udelay(50);
-#endif
-	out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
-}
-
-static void
-mpc52xx_pci_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	/* We don't rely on boot loader for PCI and resets all
-	   devices */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = &dev->resource[i];
-		if (res->end > res->start) {	/* Only valid resources */
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-		}
-	}
-
-	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
-	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
-	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
-	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
-		struct resource *res = &dev->resource[1];
-		res->start = res->end = res->flags = 0;
-	}
-}
-
-void __init
-mpc52xx_find_bridges(void)
-{
-	struct mpc52xx_pci __iomem *pci_regs;
-	struct pci_controller *hose;
-
-	pci_assign_all_buses = 1;
-
-	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
-	if (!pci_regs)
-		return;
-
-	hose = pcibios_alloc_controller();
-	if (!hose) {
-		iounmap(pci_regs);
-		return;
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->bus_offset = 0;
-	hose->ops = &mpc52xx_pci_ops;
-
-	mpc52xx_pci_setup(pci_regs);
-
-	hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET;
-
-	hose->io_base_virt = ioremap(MPC52xx_PCI_IO_BASE, MPC52xx_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	hose->cfg_addr = &pci_regs->car;
-	hose->cfg_data = hose->io_base_virt;
-
-	/* Setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			MPC52xx_PCI_MEM_START,
-			MPC52xx_PCI_MEM_STOP,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH,
-			"PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			MPC52xx_PCI_MMIO_START,
-			MPC52xx_PCI_MMIO_STOP,
-			IORESOURCE_MEM,
-			"PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			MPC52xx_PCI_IO_START,
-			MPC52xx_PCI_IO_STOP,
-			IORESOURCE_IO,
-			"PCI I/O");
-
-}
diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h
deleted file mode 100644
index 77d47dbba85e..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * PCI Include file the Freescale MPC52xx embedded cpu chips
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Inspired from code written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __SYSLIB_MPC52xx_PCI_H__
-#define __SYSLIB_MPC52xx_PCI_H__
-
-/* ======================================================================== */
-/* PCI windows config                                                       */
-/* ======================================================================== */
-
-/*
- * Master windows : MPC52xx -> PCI
- *
- *  0x80000000 -> 0x9FFFFFFF       PCI Mem prefetchable          IW0BTAR
- *  0xA0000000 -> 0xAFFFFFFF       PCI Mem                       IW1BTAR
- *  0xB0000000 -> 0xB0FFFFFF       PCI IO                        IW2BTAR
- *
- * Slave windows  : PCI -> MPC52xx
- *
- *  0xF0000000 -> 0xF003FFFF       MPC52xx MBAR                  TBATR0
- *  0x00000000 -> 0x3FFFFFFF       MPC52xx local memory          TBATR1
- */
-
-#define MPC52xx_PCI_MEM_OFFSET 	0x00000000	/* Offset for MEM MMIO */
-
-#define MPC52xx_PCI_MEM_START	0x80000000
-#define MPC52xx_PCI_MEM_SIZE	0x20000000
-#define MPC52xx_PCI_MEM_STOP	(MPC52xx_PCI_MEM_START+MPC52xx_PCI_MEM_SIZE-1)
-
-#define MPC52xx_PCI_MMIO_START	0xa0000000
-#define MPC52xx_PCI_MMIO_SIZE	0x10000000
-#define MPC52xx_PCI_MMIO_STOP	(MPC52xx_PCI_MMIO_START+MPC52xx_PCI_MMIO_SIZE-1)
-
-#define MPC52xx_PCI_IO_BASE	0xb0000000
-
-#define MPC52xx_PCI_IO_START	0x00000000
-#define MPC52xx_PCI_IO_SIZE	0x01000000
-#define MPC52xx_PCI_IO_STOP	(MPC52xx_PCI_IO_START+MPC52xx_PCI_IO_SIZE-1)
-
-
-#define MPC52xx_PCI_TARGET_IO	MPC52xx_MBAR
-#define MPC52xx_PCI_TARGET_MEM	0x00000000
-
-
-/* ======================================================================== */
-/* Structures mapping & Defines for PCI Unit                                */
-/* ======================================================================== */
-
-#define MPC52xx_PCI_GSCR_BM		0x40000000
-#define MPC52xx_PCI_GSCR_PE		0x20000000
-#define MPC52xx_PCI_GSCR_SE		0x10000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
-#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
-#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
-#define MPC52xx_PCI_GSCR_BME		0x00004000
-#define MPC52xx_PCI_GSCR_PEE		0x00002000
-#define MPC52xx_PCI_GSCR_SEE		0x00001000
-#define MPC52xx_PCI_GSCR_PR		0x00000001
-
-
-#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
-		( ( (proc_ad) & 0xff000000 )			| \
-		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
-		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
-
-#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
-						 ((win1) << 16) | \
-						 ((win2) <<  8))
-
-#define MPC52xx_PCI_IWCR_DISABLE	0x0
-#define MPC52xx_PCI_IWCR_ENABLE		0x1
-#define MPC52xx_PCI_IWCR_READ		0x0
-#define MPC52xx_PCI_IWCR_READ_LINE	0x2
-#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
-#define MPC52xx_PCI_IWCR_MEM		0x0
-#define MPC52xx_PCI_IWCR_IO		0x8
-
-#define MPC52xx_PCI_TCR_P		0x01000000
-#define MPC52xx_PCI_TCR_LD		0x00010000
-
-#define MPC52xx_PCI_TBATR_DISABLE	0x0
-#define MPC52xx_PCI_TBATR_ENABLE	0x1
-
-
-#ifndef __ASSEMBLY__
-
-struct mpc52xx_pci {
-	u32	idr;		/* PCI + 0x00 */
-	u32	scr;		/* PCI + 0x04 */
-	u32	ccrir;		/* PCI + 0x08 */
-	u32	cr1;		/* PCI + 0x0C */
-	u32	bar0;		/* PCI + 0x10 */
-	u32	bar1;		/* PCI + 0x14 */
-	u8	reserved1[16];	/* PCI + 0x18 */
-	u32	ccpr;		/* PCI + 0x28 */
-	u32	sid;		/* PCI + 0x2C */
-	u32	erbar;		/* PCI + 0x30 */
-	u32	cpr;		/* PCI + 0x34 */
-	u8	reserved2[4];	/* PCI + 0x38 */
-	u32	cr2;		/* PCI + 0x3C */
-	u8	reserved3[32];	/* PCI + 0x40 */
-	u32	gscr;		/* PCI + 0x60 */
-	u32	tbatr0;		/* PCI + 0x64 */
-	u32	tbatr1;		/* PCI + 0x68 */
-	u32	tcr;		/* PCI + 0x6C */
-	u32	iw0btar;	/* PCI + 0x70 */
-	u32	iw1btar;	/* PCI + 0x74 */
-	u32	iw2btar;	/* PCI + 0x78 */
-	u8	reserved4[4];	/* PCI + 0x7C */
-	u32	iwcr;		/* PCI + 0x80 */
-	u32	icr;		/* PCI + 0x84 */
-	u32	isr;		/* PCI + 0x88 */
-	u32	arb;		/* PCI + 0x8C */
-	u8	reserved5[104];	/* PCI + 0x90 */
-	u32	car;		/* PCI + 0xF8 */
-	u8	reserved6[4];	/* PCI + 0xFC */
-};
-
-#endif  /* __ASSEMBLY__ */
-
-
-#endif  /* __SYSLIB_MPC52xx_PCI_H__ */
diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c
deleted file mode 100644
index f58149c03b0f..000000000000
--- a/arch/ppc/syslib/mpc52xx_pic.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Programmable Interrupt Controller functions for the Freescale MPC52xx 
- * embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mpc52xx.h>
-
-
-static struct mpc52xx_intr __iomem *intr;
-static struct mpc52xx_sdma __iomem *sdma;
-
-static void
-mpc52xx_ic_disable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << 11);
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << (10 - (irq - MPC52xx_IRQ1)));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val |= 1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val |= 1 << (irq - MPC52xx_SDMA_IRQ_BASE);
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val |= 1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_enable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << 11;
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << (10 - (irq - MPC52xx_IRQ1));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val &= ~(1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE)));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val &= ~(1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val &= ~(1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE)));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_ack(unsigned int irq)
-{
-	u32 val;
-
-	/*
-	 * Only some irqs are reset here, others in interrupting hardware.
-	 */
-
-	switch (irq) {
-	case MPC52xx_IRQ0:
-		val = in_be32(&intr->ctrl);
-		val |= 0x08000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_CCS_IRQ:
-		val = in_be32(&intr->enc_status);
-		val |= 0x00000400;
-		out_be32(&intr->enc_status, val);
-		break;
-	case MPC52xx_IRQ1:
-		val = in_be32(&intr->ctrl);
-		val |= 0x04000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ2:
-		val = in_be32(&intr->ctrl);
-		val |= 0x02000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ3:
-		val = in_be32(&intr->ctrl);
-		val |= 0x01000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	default:
-		if (irq >= MPC52xx_SDMA_IRQ_BASE
-		    && irq < (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)) {
-			out_be32(&sdma->IntPend,
-				 1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		}
-		break;
-	}
-}
-
-static void
-mpc52xx_ic_disable_and_ack(unsigned int irq)
-{
-	mpc52xx_ic_disable(irq);
-	mpc52xx_ic_ack(irq);
-}
-
-static void
-mpc52xx_ic_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		mpc52xx_ic_enable(irq);
-}
-
-static struct hw_interrupt_type mpc52xx_ic = {
-	.typename	= " MPC52xx  ",
-	.enable		= mpc52xx_ic_enable,
-	.disable	= mpc52xx_ic_disable,
-	.ack		= mpc52xx_ic_disable_and_ack,
-	.end		= mpc52xx_ic_end,
-};
-
-void __init
-mpc52xx_init_irq(void)
-{
-	int i;
-	u32 intr_ctrl;
-
-	/* Remap the necessary zones */
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-	sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
-
-	if ((intr==NULL) || (sdma==NULL))
-		panic("Can't ioremap PIC/SDMA register for init_irq !");
-
-	/* Disable all interrupt sources. */
-	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
-	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
-	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
-	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &=    0x00ff0000;	/* Keeps IRQ[0-3] config */
-	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
-			0x00001000 |	/* MEE master external enable */
-			0x00000000 |	/* 0 means disable IRQ 0-3 */
-			0x00000001;	/* CEb route critical normally */
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Zero a bunch of the priority settings.  */
-	out_be32(&intr->per_pri1, 0);
-	out_be32(&intr->per_pri2, 0);
-	out_be32(&intr->per_pri3, 0);
-	out_be32(&intr->main_pri1, 0);
-	out_be32(&intr->main_pri2, 0);
-
-	/* Initialize irq_desc[i].chip's with mpc52xx_ic. */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].chip = &mpc52xx_ic;
-		irq_desc[i].status = IRQ_LEVEL;
-	}
-
-	#define IRQn_MODE(intr_ctrl,irq) (((intr_ctrl) >> (22-(i<<1))) & 0x03)
-	for (i=0 ; i<4 ; i++) {
-		int mode;
-		mode = IRQn_MODE(intr_ctrl,i);
-		if ((mode == 0x1) || (mode == 0x2))
-			irq_desc[i?MPC52xx_IRQ1+i-1:MPC52xx_IRQ0].status = 0;
-	}
-}
-
-int
-mpc52xx_get_irq(void)
-{
-	u32 status;
-	int irq = -1;
-
-	status = in_be32(&intr->enc_status);
-
-	if (status & 0x00000400) {		/* critical */
-		irq = (status >> 8) & 0x3;
-		if (irq == 2)			/* high priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_CRIT_IRQ_BASE;
-	}
-	else if (status & 0x00200000) {		/* main */
-		irq = (status >> 16) & 0x1f;
-		if (irq == 4)			/* low priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_MAIN_IRQ_BASE;
-	}
-	else if (status & 0x20000000) {		/* peripheral */
-peripheral:
-		irq = (status >> 24) & 0x1f;
-		if (irq == 0) {			/* bestcomm */
-			status = in_be32(&sdma->IntPend);
-			irq = ffs(status) + MPC52xx_SDMA_IRQ_BASE-1;
-		}
-		else
-			irq += MPC52xx_PERP_IRQ_BASE;
-	}
-
-	return irq;
-}
-
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
deleted file mode 100644
index ab0cf4ced9e5..000000000000
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Common code for the boards based on Freescale MPC52xx embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Support for other bootloaders than UBoot by Dale Farnsworth 
- * <dfarnsworth@mvista.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/pgtable.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/mpc52xx_pci.h>
-
-extern bd_t __res;
-
-static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
-	0,  0,  0,  10, 20, 20, 25, 45,	/* from the datasheet used to compute */
-	30, 55, 40, 50, 0,  60, 35, 0,	/* CPU frequency from XLB freq and    */
-	30, 25, 65, 10, 70, 20, 75, 45,	/* external jumper config             */
-	0,  55, 40, 50, 80, 60, 35, 0
-};
-
-void
-mpc52xx_restart(char *cmd)
-{
-	struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
-
-	local_irq_disable();
-
-	/* Turn on the watchdog and wait for it to expire. It effectively
-	  does a reset */
-	out_be32(&gpt0->count, 0x000000ff);
-	out_be32(&gpt0->mode, 0x00009004);
-
-	while (1);
-}
-
-void
-mpc52xx_halt(void)
-{
-	local_irq_disable();
-
-	while (1);
-}
-
-void
-mpc52xx_power_off(void)
-{
-	/* By default we don't have any way of shut down.
-	   If a specific board wants to, it can set the power down
-	   code to any hardware implementation dependent code */
-	mpc52xx_halt();
-}
-
-
-void __init
-mpc52xx_set_bat(void)
-{
-	/* Set BAT 2 to map the 0xf0000000 area */
-	/* This mapping is used during mpc52xx_progress,
-	 * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
-	 */
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-void __init
-mpc52xx_map_io(void)
-{
-	/* Here we map the MBAR and the whole upper zone. MBAR is only
-	   64k but we can't map only 64k with BATs. Map the whole
-	   0xf0000000 range is ok and helps eventual lpb devices placed there */
-	io_block_mapping(
-		MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO);
-}
-
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-#ifndef MPC52xx_PF_CONSOLE_PORT
-#error "mpc52xx PSC for console not selected"
-#endif
-
-static void
-mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) &
-	         MPC52xx_PSC_SR_TXRDY));
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-}
-
-void
-mpc52xx_progress(char *s, unsigned short hex)
-{
-	char c;
-	struct mpc52xx_psc __iomem *psc;
-
-	psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
-
-	while ((c = *s++) != 0) {
-		if (c == '\n')
-			mpc52xx_psc_putc(psc, '\r');
-		mpc52xx_psc_putc(psc, c);
-	}
-
-	mpc52xx_psc_putc(psc, '\r');
-	mpc52xx_psc_putc(psc, '\n');
-}
-
-#endif  /* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-unsigned long __init
-mpc52xx_find_end_of_memory(void)
-{
-	u32 ramsize = __res.bi_memsize;
-
-	/*
-	 * if bootloader passed a memsize, just use it
-	 * else get size from sdram config registers
-	 */
-	if (ramsize == 0) {
-		struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
-		u32 sdram_config_0, sdram_config_1;
-
-		/* Temp BAT2 mapping active when this is called ! */
-		mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
-
-		sdram_config_0 = in_be32(&mmap_ctl->sdram0);
-		sdram_config_1 = in_be32(&mmap_ctl->sdram1);
-
-		if ((sdram_config_0 & 0x1f) >= 0x13)
-			ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
-
-		if (((sdram_config_1 & 0x1f) >= 0x13) &&
-				((sdram_config_1 & 0xfff00000) == ramsize))
-			ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
-	}
-
-	return ramsize;
-}
-
-void __init
-mpc52xx_calibrate_decr(void)
-{
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
-
-	xlbfreq = __res.bi_busfreq;
-	/* if bootloader didn't pass bus frequencies, calculate them */
-	if (xlbfreq == 0) {
-		/* Get RTC & Clock manager modules */
-		struct mpc52xx_rtc __iomem *rtc;
-		struct mpc52xx_cdm __iomem *cdm;
-
-		rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
-		cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-
-		if ((rtc==NULL) || (cdm==NULL))
-			panic("Can't ioremap RTC/CDM while computing bus freq");
-
-		/* Count bus clock during 1/64 sec */
-		out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-		previous_time = in_be32(&rtc->time);
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_start = get_tbl();
-		previous_time = current_time;
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_end = get_tbl();
-		out_be32(&rtc->dividers, 0xffff0000);	/* Restore RTC */
-
-		/* Compute all frequency from that & CDM settings */
-		xlbfreq = (tbl_end - tbl_start) << 8;
-		cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
-		ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
-					xlbfreq / 2 : xlbfreq;
-		switch (in_8(&cdm->pci_clk_sel) & 3) {
-		case 0:
-			pcifreq = ipbfreq;
-			break;
-		case 1:
-			pcifreq = ipbfreq / 2;
-			break;
-		default:
-			pcifreq = xlbfreq / 4;
-			break;
-		}
-		__res.bi_busfreq = xlbfreq;
-		__res.bi_intfreq = cpufreq;
-		__res.bi_ipbfreq = ipbfreq;
-		__res.bi_pcifreq = pcifreq;
-
-		/* Release mapping */
-		iounmap(rtc);
-		iounmap(cdm);
-	}
-
-	divisor = 4;
-
-	tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
-}
-
-
-void __init
-mpc52xx_setup_cpu(void)
-{
-	struct mpc52xx_cdm  __iomem *cdm;
-	struct mpc52xx_xlb  __iomem *xlb;
-
-	/* Map zones */
-	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
-
-	if (!cdm || !xlb) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping CDM/XLB during "
-			"mpc52xx_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Use internal 48 Mhz */
-	out_8(&cdm->ext_48mhz_en, 0x00);
-	out_8(&cdm->fd_enable, 0x01);
-	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
-		out_be16(&cdm->fd_counters, 0x0001);
-	else
-		out_be16(&cdm->fd_counters, 0x5555);
-
-	/* Configure the XLB Arbiter priorities */
-	out_be32(&xlb->master_pri_enable, 0xff);
-	out_be32(&xlb->master_priority, 0x11111111);
-
-	/* Enable ram snooping for 1GB window */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
-	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
-	/* Disable XLB pipelining */
-	/* (cfr errata 292. We could do this only just before ATA PIO
-	    transaction and re-enable it after ...) */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (cdm)  iounmap(cdm);
-	if (xlb)  iounmap(xlb);
-}
-
-
-int mpc52xx_match_psc_function(int psc_idx, const char *func)
-{
-	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
-
-	while ((cf->id != -1) && (cf->func != NULL)) {
-		if ((cf->id == psc_idx) && !strcmp(cf->func,func))
-			return 1;
-		cf++;
-	}
-
-	return 0;
-}
-
-int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
-{
-	static DEFINE_SPINLOCK(lock);
-	struct mpc52xx_cdm __iomem *cdm;
-	unsigned long flags;
-	u16 mclken_div;
-	u16 __iomem *reg;
-	u32 mask;
-
-	cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	if (!cdm) {
-		printk(KERN_ERR __FILE__ ": Error mapping CDM\n");
-		return -ENODEV;
-	}
-
-	mclken_div = 0x8000 | (clkdiv & 0x1FF);
-	switch (psc_id) {
-	case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break;
-	case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break;
-	case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break;
-	case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break;
-	default:
-		return -ENODEV;
-	}
-
-	/* Set the rate and enable the clock */
-	spin_lock_irqsave(&lock, flags);
-	out_be16(reg, mclken_div);
-	out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask);
-	spin_unlock_irqrestore(&lock, flags);
-
-	iounmap(cdm);
-	return 0;
-}
diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c
deleted file mode 100644
index b4e6f978f057..000000000000
--- a/arch/ppc/syslib/mpc52xx_sys.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Freescale MPC52xx system descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "5200",
-		.mask		= 0xffff0000,
-		.value		= 0x80110000,
-		.num_devices	= 15,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC52xx_MSCAN1, MPC52xx_MSCAN2, MPC52xx_SPI,
-			MPC52xx_USB, MPC52xx_BDLC, MPC52xx_PSC1, MPC52xx_PSC2,
-			MPC52xx_PSC3, MPC52xx_PSC4, MPC52xx_PSC5, MPC52xx_PSC6,
-			MPC52xx_FEC, MPC52xx_ATA, MPC52xx_I2C1, MPC52xx_I2C2,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask		= 0x00000000,
-		.value		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
deleted file mode 100644
index 80804eee5795..000000000000
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * MPC8xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/mii.h>
-#include <asm/cpm1.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-
-/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time.
- * They will get fixed up by mach_mpc8xx_fixup
- */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC8xx_CPM_FEC1] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name 	= "regs",
-				.start	= 0xe00,
-				.end	= 0xe88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC1,
-				.end	= MPC8xx_INT_FEC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_FEC2] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 2,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name	= "regs",
-				.start	= 0x1e00,
-				.end	= 0x1e88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC2,
-				.end	= MPC8xx_INT_FEC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa00,
-				.end	= 0xa18,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3c00,
-				.end 	= 0x3c7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC1,
-				.end	= MPC8xx_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa20,
-				.end	= 0xa38,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3d00,
-				.end 	= 0x3d7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC2,
-				.end	= MPC8xx_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa40,
-				.end	= 0xa58,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3e00,
-				.end 	= 0x3e7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC3,
-				.end	= MPC8xx_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa60,
-				.end	= 0xa78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3f00,
-				.end 	= 0x3f7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC4,
-				.end	= MPC8xx_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa80,
-				.end	= 0xa8f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x3e80,
-				.end	= 0x3ebf,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC1,
-				.end	= MPC8xx_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa90,
-				.end	= 0xa9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
- 				.name	= "pram",
- 				.start	= 0x3f80,
- 				.end	= 0x3fbf,
- 				.flags	= IORESOURCE_MEM,
-
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC2,
-				.end	= MPC8xx_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-
-        [MPC8xx_MDIO_FEC] = {
-                .name = "fsl-cpm-fec-mdio",
-                .id = 0,
-                .num_resources = 0,
-
-        },
-
-};
-
-static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc8xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc8xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
deleted file mode 100644
index 18ba1d7ff9f1..000000000000
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MPC8xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec; 
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "MPC86X",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 8,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{
-		.ppc_sys_name	= "MPC885",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 9,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_FEC2,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
deleted file mode 100644
index 2dd2dc5cd404..000000000000
--- a/arch/ppc/syslib/mv64360_pic.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * Interrupt controller support for Marvell's MV64360.
- *
- * Author: Rabeeh Khoury <rabeeh@galileo.co.il>
- * Based on MV64360 PIC written by
- * Chris Zankel <chris@mvista.com>
- * Mark A. Greer <mgreer@mvista.com>
- *
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * This file contains the specific functions to support the MV64360
- * interrupt controller.
- *
- * The MV64360 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the MV64360.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-#error "The mv64360 does not support distribution of IRQs on all CPUs"
-#endif
-/* ========================== forward declaration ========================== */
-
-static void mv64360_unmask_irq(unsigned int);
-static void mv64360_mask_irq(unsigned int);
-static irqreturn_t mv64360_cpu_error_int_handler(int, void *);
-static irqreturn_t mv64360_sram_error_int_handler(int, void *);
-static irqreturn_t mv64360_pci_error_int_handler(int, void *);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type mv64360_pic = {
-	.typename = " mv64360  ",
-	.enable   = mv64360_unmask_irq,
-	.disable  = mv64360_mask_irq,
-	.ack      = mv64360_mask_irq,
-	.end      = mv64360_unmask_irq,
-};
-
-#define CPU_INTR_STR	"mv64360 cpu interface error"
-#define SRAM_INTR_STR	"mv64360 internal sram error"
-#define PCI0_INTR_STR	"mv64360 pci 0 error"
-#define PCI1_INTR_STR	"mv64360 pci 1 error"
-
-static struct mv64x60_handle bh;
-
-u32 mv64360_irq_base = 0;	/* MV64360 handles the next 96 IRQs from here */
-
-/* mv64360_init_irq()
- *
- * This function initializes the interrupt controller. It assigns
- * all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
- *
- * Input Variable(s):
- *  None.
- *
- * Outpu. Variable(s):
- *  None.
- *
- * Returns:
- *  void
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-mv64360_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
-
-	/* All interrupts are level interrupts */
-	for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
-		irq_desc[i].status |= IRQ_LEVEL;
-		irq_desc[i].chip = &mv64360_pic;
-	}
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: exit", 0x0);
-}
-
-/* mv64360_get_irq()
- *
- * This function returns the lowest interrupt number of all interrupts that
- * are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- *
- */
-int
-mv64360_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-#ifdef CONFIG_SMP
-	/*
-	 * Second CPU gets only doorbell (message) interrupts.
-	 * The doorbell interrupt is BIT28 in the main interrupt low cause reg.
-	 */
-	int cpu_nr = smp_processor_id();
-	if (cpu_nr == 1) {
-		if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
-		      (1 << MV64x60_IRQ_DOORBELL)))
-			return -1;
-		return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
-	}
-#endif
-
-	irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			}
-			else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (mv64360_irq_base + irq);
-}
-
-/* mv64360_unmask_irq()
- *
- * This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_unmask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	/* second CPU gets only doorbell interrupts */
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* mv64360_mask_irq()
- *
- * This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_mask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-mv64360_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_sram_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
-		"Error in internal SRAM - Cause register",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
-	printk(KERN_ERR "\tSRAM error register dump:\n");
-	printk(KERN_ERR "\tAddress Low  0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress High 0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData Low     0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
-	printk(KERN_ERR "\tData High    0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
- * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
- * well.  IOW, don't set bit 0.
- */
-#define MV64360_PCI0_ERR_MASK_VAL	0x00a50c24
-
-static int __init
-mv64360_register_hdlrs(void)
-{
-	int	rc;
-
-	/* Clear old errors and register CPU interface error intr handler */
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
-		mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
-
-	/* Clear old errors and register internal SRAM error intr handler */
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
-		mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
-
-	/* Clear old errors and register PCI 0 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL);
-
-	/* Clear old errors and register PCI 1 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL);
-
-	return 0;
-}
-
-arch_initcall(mv64360_register_hdlrs);
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
deleted file mode 100644
index 418f3053de52..000000000000
--- a/arch/ppc/syslib/mv64x60.c
+++ /dev/null
@@ -1,2485 +0,0 @@
-/*
- * Common routines for the Marvell/Galileo Discovery line of host bridges
- * (gt64260, mv64360, mv64460, ...).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-u8 mv64x60_pci_exclude_bridge = 1;
-DEFINE_SPINLOCK(mv64x60_lock);
-
-static phys_addr_t 	mv64x60_bridge_pbase;
-static void 		__iomem *mv64x60_bridge_vbase;
-static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
-static u32		mv64x60_bridge_rev;
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct pci_controller	sysfs_hose_a;
-#endif
-
-static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-static u32 mv64360_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 mv64360_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-static void mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base);
-static void mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-
-/*
- * Define tables that have the chip-specific info for each type of
- * Marvell bridge chip.
- */
-static struct mv64x60_chip_info gt64260a_ci __initdata = { /* GT64260A */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260a_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info gt64260b_ci __initdata = { /* GT64260B */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260b_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64360_ci __initdata = { /* MV64360 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64360_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64460_ci __initdata = { /* MV64460 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64460_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-/*
- *****************************************************************************
- *
- *	Platform Device Definitions
- *
- *****************************************************************************
- */
-#ifdef CONFIG_SERIAL_MPSC
-static struct mpsc_shared_pdata mv64x60_mpsc_shared_pdata = {
-	.mrr_val		= 0x3ffffe38,
-	.rcrr_val		= 0,
-	.tcrr_val		= 0,
-	.intr_cause_val		= 0,
-	.intr_mask_val		= 0,
-};
-
-static struct resource mv64x60_mpsc_shared_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc routing base",
-		.start	= MV64x60_MPSC_ROUTING_OFFSET,
-		.end	= MV64x60_MPSC_ROUTING_OFFSET +
-			MPSC_ROUTING_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma intr base",
-		.start	= MV64x60_SDMA_INTR_OFFSET,
-		.end	= MV64x60_SDMA_INTR_OFFSET +
-			MPSC_SDMA_INTR_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mpsc_shared_device = { /* Shared device */
-	.name		= MPSC_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc_shared_resources),
-	.resource	= mv64x60_mpsc_shared_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc_shared_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc0_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc0_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 0 base",
-		.start	= MV64x60_MPSC_0_OFFSET,
-		.end	= MV64x60_MPSC_0_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 0 base",
-		.start	= MV64x60_SDMA_0_OFFSET,
-		.end	= MV64x60_SDMA_0_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 0 base",
-		.start	= MV64x60_BRG_0_OFFSET,
-		.end	= MV64x60_BRG_0_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 0 irq",
-		.start	= MV64x60_IRQ_SDMA_0,
-		.end	= MV64x60_IRQ_SDMA_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc0_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc0_resources),
-	.resource	= mv64x60_mpsc0_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc0_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc1_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc1_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 1 base",
-		.start	= MV64x60_MPSC_1_OFFSET,
-		.end	= MV64x60_MPSC_1_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 1 base",
-		.start	= MV64x60_SDMA_1_OFFSET,
-		.end	= MV64x60_SDMA_1_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 1 base",
-		.start	= MV64x60_BRG_1_OFFSET,
-		.end	= MV64x60_BRG_1_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 1 irq",
-		.start	= MV64360_IRQ_SDMA_1,
-		.end	= MV64360_IRQ_SDMA_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc1_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc1_resources),
-	.resource	= mv64x60_mpsc1_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc1_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv64x60_eth_shared_resources[] = {
-	[0] = {
-		.name	= "ethernet shared base",
-		.start	= MV643XX_ETH_SHARED_REGS,
-		.end	= MV643XX_ETH_SHARED_REGS +
-					MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv64x60_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth_shared_resources),
-	.resource	= mv64x60_eth_shared_resources,
-};
-
-#ifdef CONFIG_MV643XX_ETH_0
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 0,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_1
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 1,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_2
-static struct resource mv64x60_eth2_resources[] = {
-	[0] = {
-		.name	= "eth2 irq",
-		.start	= MV64x60_IRQ_ETH_2,
-		.end	= MV64x60_IRQ_ETH_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 2,
-};
-
-static struct platform_device eth2_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
-	.resource	= mv64x60_eth2_resources,
-	.dev = {
-		.platform_data = &eth2_pd,
-	},
-};
-#endif
-#endif
-
-#ifdef	CONFIG_I2C_MV64XXX
-static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = {
-	.freq_m			= 8,
-	.freq_n			= 3,
-	.timeout		= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource mv64xxx_i2c_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mv64xxx i2c base",
-		.start	= MV64XXX_I2C_OFFSET,
-		.end	= MV64XXX_I2C_OFFSET + MV64XXX_I2C_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "mv64xxx i2c irq",
-		.start	= MV64x60_IRQ_I2C,
-		.end	= MV64x60_IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_device = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64xxx_i2c_resources),
-	.resource	= mv64xxx_i2c_resources,
-	.dev = {
-		.platform_data = &mv64xxx_i2c_pdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_WATCHDOG
-static struct mv64x60_wdt_pdata mv64x60_wdt_pdata = {
-	.timeout		= 10,  /* default watchdog expiry in seconds */
-	.bus_clk		= 133, /* default bus clock in MHz */
-};
-
-static struct resource mv64x60_wdt_resources[] = {
-	[0] = {
-		.name	= "mv64x60 wdt base",
-		.start	= MV64x60_WDT_WDC,
-		.end	= MV64x60_WDT_WDC + 8 - 1, /* two 32-bit registers */
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wdt_device = {
-	.name		= MV64x60_WDT_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_wdt_resources),
-	.resource	= mv64x60_wdt_resources,
-	.dev = {
-		.platform_data = &mv64x60_wdt_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct mv64xxx_pdata mv64xxx_pdata = {
-	.hs_reg_valid	= 0,
-};
-
-static struct platform_device mv64xxx_device = { /* general mv64x60 stuff */
-	.name	= MV64XXX_DEV_NAME,
-	.id	= 0,
-	.dev = {
-		.platform_data = &mv64xxx_pdata,
-	},
-};
-#endif
-
-static struct platform_device *mv64x60_pd_devs[] __initdata = {
-#ifdef CONFIG_SERIAL_MPSC
-	&mpsc_shared_device,
-	&mpsc0_device,
-	&mpsc1_device,
-#endif
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-	&mv64x60_eth_shared_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_0
-	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	&eth2_device,
-#endif
-#ifdef	CONFIG_I2C_MV64XXX
-	&i2c_device,
-#endif
-#ifdef	CONFIG_MV64X60_WDT
-	&wdt_device,
-#endif
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	&mv64xxx_device,
-#endif
-};
-
-/*
- *****************************************************************************
- *
- *	Bridge Initialization Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_init()
- *
- * Initialize the bridge based on setting passed in via 'si'.  The bridge
- * handle, 'bh', will be set so that it can be used to make subsequent
- * calls to routines in this file.
- */
-int __init
-mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64x60 initialization", 0x0);
-
-	spin_lock_init(&mv64x60_lock);
-	mv64x60_early_init(bh, si);
-
-	if (mv64x60_get_type(bh) || mv64x60_setup_for_chip(bh)) {
-		iounmap(bh->v_base);
-		bh->v_base = 0;
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60_init: Can't determine chip",0);
-		return -1;
-	}
-
-	bh->ci->disable_all_windows(bh, si);
-	mv64x60_get_mem_windows(bh, mem_windows);
-	mv64x60_config_cpu2mem_windows(bh, si, mem_windows);
-
-	if (bh->ci->config_io2mem_windows)
-		bh->ci->config_io2mem_windows(bh, si, mem_windows);
-	if (bh->ci->set_mpsc2regs_window)
-		bh->ci->set_mpsc2regs_window(bh, si->phys_reg_base);
-
-	if (si->pci_1.enable_bus) {
-		bh->io_base_b = (u32)ioremap(si->pci_1.pci_io.cpu_base,
-			si->pci_1.pci_io.size);
-		isa_io_base = bh->io_base_b;
-	}
-
-	if (si->pci_0.enable_bus) {
-		bh->io_base_a = (u32)ioremap(si->pci_0.pci_io.cpu_base,
-			si->pci_0.pci_io.size);
-		isa_io_base = bh->io_base_a;
-
-		mv64x60_alloc_hose(bh, MV64x60_PCI0_CONFIG_ADDR,
-			MV64x60_PCI0_CONFIG_DATA, &bh->hose_a);
-		mv64x60_config_resources(bh->hose_a, &si->pci_0, bh->io_base_a);
-		mv64x60_config_pci_params(bh->hose_a, &si->pci_0);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_0, 0);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_a, &si->pci_0, 0,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_a, 0,
-			si->phys_reg_base);
-	}
-
-	if (si->pci_1.enable_bus) {
-		mv64x60_alloc_hose(bh, MV64x60_PCI1_CONFIG_ADDR,
-			MV64x60_PCI1_CONFIG_DATA, &bh->hose_b);
-		mv64x60_config_resources(bh->hose_b, &si->pci_1, bh->io_base_b);
-		mv64x60_config_pci_params(bh->hose_b, &si->pci_1);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_1, 1);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_b, &si->pci_1, 1,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_b, 1,
-			si->phys_reg_base);
-	}
-
-	bh->ci->chip_specific_init(bh, si);
-	mv64x60_pd_fixup(bh, mv64x60_pd_devs, ARRAY_SIZE(mv64x60_pd_devs));
-
-	return 0;
-}
-
-/*
- * mv64x60_early_init()
- *
- * Do some bridge work that must take place before we start messing with
- * the bridge for real.
- */
-void __init
-mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	struct pci_controller	hose_a, hose_b;
-
-	memset(bh, 0, sizeof(*bh));
-
-	bh->p_base = si->phys_reg_base;
-	bh->v_base = ioremap(bh->p_base, MV64x60_INTERNAL_SPACE_SIZE);
-
-	mv64x60_bridge_pbase = bh->p_base;
-	mv64x60_bridge_vbase = bh->v_base;
-
-	/* Assuming pci mode [reserved] bits 4:5 on 64260 are 0 */
-	bh->pci_mode_a = mv64x60_read(bh, MV64x60_PCI0_MODE) &
-		MV64x60_PCIMODE_MASK;
-	bh->pci_mode_b = mv64x60_read(bh, MV64x60_PCI1_MODE) &
-		MV64x60_PCIMODE_MASK;
-
-	/* Need temporary hose structs to call mv64x60_set_bus() */
-	memset(&hose_a, 0, sizeof(hose_a));
-	memset(&hose_b, 0, sizeof(hose_b));
-	setup_indirect_pci_nomap(&hose_a, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-	setup_indirect_pci_nomap(&hose_b, bh->v_base + MV64x60_PCI1_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI1_CONFIG_DATA);
-	bh->hose_a = &hose_a;
-	bh->hose_b = &hose_b;
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	/* Save a copy of hose_a for sysfs functions -- hack */
-	memcpy(&sysfs_hose_a, &hose_a, sizeof(hose_a));
-#endif
-
-	mv64x60_set_bus(bh, 0, 0);
-	mv64x60_set_bus(bh, 1, 0);
-
-	bh->hose_a = NULL;
-	bh->hose_b = NULL;
-
-	/* Clear bit 0 of PCI addr decode control so PCI->CPU remap 1:1 */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_PCI_DECODE_CNTL, 0x00000001);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_PCI_DECODE_CNTL, 0x00000001);
-
-	/* Bit 12 MUST be 0; set bit 27--don't auto-update cpu remap regs */
-	mv64x60_clr_bits(bh, MV64x60_CPU_CONFIG, (1<<12));
-	mv64x60_set_bits(bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff);
-}
-
-/*
- *****************************************************************************
- *
- *	Window Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_32bit_window()
- *
- * Determine the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base, u32 *size)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_32bit[window].get_from_field;
-
-		val = mv64x60_read(bh, base_reg);
-		*base = get_from_field(val, base_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base, val, size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n",
-		window, *base, *size);
-}
-
-/*
- * mv64x60_set_32bit_window()
- *
- * Set the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base, u32 size, u32 other_bits)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 32bit window: %d, base: 0x%x, size: 0x%x, other: 0x%x\n",
-		window, base, size, other_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_32bit[window].map_to_field;
-
-		val = map_to_field(base, base_bits) | other_bits;
-		mv64x60_write(bh, base_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_get_64bit_window()
- *
- * Determine the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base_hi, u32 *base_lo, u32 *size)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_64bit[window].get_from_field;
-
-		*base_hi = mv64x60_read(bh,
-			bh->ci->window_tab_64bit[window].base_hi_reg);
-
-		val = mv64x60_read(bh, base_lo_reg);
-		*base_lo = get_from_field(val, base_lo_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base_lo, val,
-								size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base_hi = 0;
-		*base_lo = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x\n", window, *base_hi, *base_lo, *size);
-}
-
-/*
- * mv64x60_set_64bit_window()
- *
- * Set the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base_hi, u32 base_lo, u32 size, u32 other_bits)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x, other: 0x%x\n",
-		window, base_hi, base_lo, size, other_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_64bit[window].map_to_field;
-
-		mv64x60_write(bh, bh->ci->window_tab_64bit[window].base_hi_reg,
-			base_hi);
-
-		val = map_to_field(base_lo, base_lo_bits) | other_bits;
-		mv64x60_write(bh, base_lo_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base_lo, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_mask()
- *
- * Take the high-order 'num_bits' of 'val' & mask off low bits.
- */
-u32 __init
-mv64x60_mask(u32 val, u32 num_bits)
-{
-	return val & (0xffffffff << (32 - num_bits));
-}
-
-/*
- * mv64x60_shift_left()
- *
- * Take the low-order 'num_bits' of 'val', shift left to align at bit 31 (MSB).
- */
-u32 __init
-mv64x60_shift_left(u32 val, u32 num_bits)
-{
-	return val << (32 - num_bits);
-}
-
-/*
- * mv64x60_shift_right()
- *
- * Take the high-order 'num_bits' of 'val', shift right to align at bit 0 (LSB).
- */
-u32 __init
-mv64x60_shift_right(u32 val, u32 num_bits)
-{
-	return val >> (32 - num_bits);
-}
-
-/*
- *****************************************************************************
- *
- *	Chip Identification Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_type()
- *
- * Determine the type of bridge chip we have.
- */
-int __init
-mv64x60_get_type(struct mv64x60_handle *bh)
-{
-	struct pci_controller hose;
-	u16	val;
-	u8	save_exclude;
-
-	memset(&hose, 0, sizeof(hose));
-	setup_indirect_pci_nomap(&hose, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	/* Sanity check of bridge's Vendor ID */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		mv64x60_pci_exclude_bridge = save_exclude;
-		return -1;
-	}
-
-	/* Get the revision of the chip */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_CLASS_REVISION,
-		&val);
-	bh->rev = (u32)(val & 0xff);
-
-	/* Figure out the type of Marvell bridge it is */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &val);
-	mv64x60_pci_exclude_bridge = save_exclude;
-
-	switch (val) {
-	case PCI_DEVICE_ID_MARVELL_GT64260:
-		switch (bh->rev) {
-		case GT64260_REV_A:
-			bh->type = MV64x60_TYPE_GT64260A;
-			break;
-
-		default:
-			printk(KERN_WARNING "Unsupported GT64260 rev %04x\n",
-				bh->rev);
-			/* Assume its similar to a 'B' rev and fallthru */
-		case GT64260_REV_B:
-			bh->type = MV64x60_TYPE_GT64260B;
-			break;
-		}
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64360:
-		/* Marvell won't tell me how to distinguish a 64361 & 64362 */
-		bh->type = MV64x60_TYPE_MV64360;
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64460:
-		bh->type = MV64x60_TYPE_MV64460;
-		break;
-
-	default:
-		printk(KERN_ERR "Unknown Marvell bridge type %04x\n", val);
-		return -1;
-	}
-
-	/* Hang onto bridge type & rev for PIC code */
-	mv64x60_bridge_type = bh->type;
-	mv64x60_bridge_rev = bh->rev;
-
-	return 0;
-}
-
-/*
- * mv64x60_setup_for_chip()
- *
- * Set 'bh' to use the proper set of routine for the bridge chip that we have.
- */
-int __init
-mv64x60_setup_for_chip(struct mv64x60_handle *bh)
-{
-	int	rc = 0;
-
-	/* Set up chip-specific info based on the chip/bridge type */
-	switch(bh->type) {
-	case MV64x60_TYPE_GT64260A:
-		bh->ci = &gt64260a_ci;
-		break;
-
-	case MV64x60_TYPE_GT64260B:
-		bh->ci = &gt64260b_ci;
-		break;
-
-	case MV64x60_TYPE_MV64360:
-		bh->ci = &mv64360_ci;
-		break;
-
-	case MV64x60_TYPE_MV64460:
-		bh->ci = &mv64460_ci;
-		break;
-
-	case MV64x60_TYPE_INVALID:
-	default:
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60: Unsupported bridge", 0x0);
-		printk(KERN_ERR "mv64x60: Unsupported bridge\n");
-		rc = -1;
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_bridge_vbase()
- *
- * Return the virtual address of the bridge's registers.
- */
-void __iomem *
-mv64x60_get_bridge_vbase(void)
-{
-	return mv64x60_bridge_vbase;
-}
-
-/*
- * mv64x60_get_bridge_type()
- *
- * Return the type of bridge on the platform.
- */
-u32
-mv64x60_get_bridge_type(void)
-{
-	return mv64x60_bridge_type;
-}
-
-/*
- * mv64x60_get_bridge_rev()
- *
- * Return the revision of the bridge on the platform.
- */
-u32
-mv64x60_get_bridge_rev(void)
-{
-	return mv64x60_bridge_rev;
-}
-
-/*
- *****************************************************************************
- *
- *	System Memory Window Related Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_mem_size()
- *
- * Calculate the amount of memory that the memory controller is set up for.
- * This should only be used by board-specific code if there is no other
- * way to determine the amount of memory in the system.
- */
-u32 __init
-mv64x60_get_mem_size(u32 bridge_base, u32 chip_type)
-{
-	struct mv64x60_handle	bh;
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-	u32	rc = 0;
-
-	memset(&bh, 0, sizeof(bh));
-
-	bh.type = chip_type;
-	bh.v_base = (void *)bridge_base;
-
-	if (!mv64x60_setup_for_chip(&bh)) {
-		mv64x60_get_mem_windows(&bh, mem_windows);
-		rc = mv64x60_calc_mem_size(&bh, mem_windows);
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_mem_windows()
- *
- * Get the values in the memory controller & return in the 'mem_windows' array.
- */
-void __init
-mv64x60_get_mem_windows(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win))
-			mv64x60_get_32bit_window(bh, win,
-				&mem_windows[i][0], &mem_windows[i][1]);
-		else {
-			mem_windows[i][0] = 0;
-			mem_windows[i][1] = 0;
-		}
-}
-
-/*
- * mv64x60_calc_mem_size()
- *
- * Using the memory controller register values in 'mem_windows', determine
- * how much memory it is set up for.
- */
-u32 __init
-mv64x60_calc_mem_size(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, total = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		total += mem_windows[i][1];
-
-	return total;
-}
-
-/*
- *****************************************************************************
- *
- *	CPU->System MEM, PCI Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_cpu2mem_windows()
- *
- * Configure CPU->Memory windows on the bridge.
- */
-static u32 prot_tab[] __initdata = {
-	MV64x60_CPU_PROT_0_WIN, MV64x60_CPU_PROT_1_WIN,
-	MV64x60_CPU_PROT_2_WIN, MV64x60_CPU_PROT_3_WIN
-};
-
-static u32 cpu_snoop_tab[] __initdata = {
-	MV64x60_CPU_SNOOP_0_WIN, MV64x60_CPU_SNOOP_1_WIN,
-	MV64x60_CPU_SNOOP_2_WIN, MV64x60_CPU_SNOOP_3_WIN
-};
-
-void __init
-mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/* Set CPU protection & snoop windows */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, prot_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				si->cpu_prot_options[i]);
-			bh->ci->enable_window_32bit(bh, prot_tab[i]);
-
-			if (bh->ci->window_tab_32bit[cpu_snoop_tab[i]].
-								base_reg != 0) {
-				mv64x60_set_32bit_window(bh, cpu_snoop_tab[i],
-					mem_windows[i][0], mem_windows[i][1],
-					si->cpu_snoop_options[i]);
-				bh->ci->enable_window_32bit(bh,
-					cpu_snoop_tab[i]);
-			}
-
-		}
-}
-
-/*
- * mv64x60_config_cpu2pci_windows()
- *
- * Configure the CPU->PCI windows for one of the PCI buses.
- */
-static u32 win_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_WIN, MV64x60_CPU2PCI0_MEM_0_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_WIN, MV64x60_CPU2PCI0_MEM_2_WIN },
-	{ MV64x60_CPU2PCI1_IO_WIN, MV64x60_CPU2PCI1_MEM_0_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_WIN, MV64x60_CPU2PCI1_MEM_2_WIN },
-};
-
-static u32 remap_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_REMAP_WIN, MV64x60_CPU2PCI0_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_REMAP_WIN, MV64x60_CPU2PCI0_MEM_2_REMAP_WIN },
-	{ MV64x60_CPU2PCI1_IO_REMAP_WIN, MV64x60_CPU2PCI1_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_REMAP_WIN, MV64x60_CPU2PCI1_MEM_2_REMAP_WIN }
-};
-
-void __init
-mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
-	struct mv64x60_pci_info *pi, u32 bus)
-{
-	int	i;
-
-	if (pi->pci_io.size > 0) {
-		mv64x60_set_32bit_window(bh, win_tab[bus][0],
-			pi->pci_io.cpu_base, pi->pci_io.size, pi->pci_io.swap);
-		mv64x60_set_32bit_window(bh, remap_tab[bus][0],
-			pi->pci_io.pci_base_lo, 0, 0);
-		bh->ci->enable_window_32bit(bh, win_tab[bus][0]);
-	} else /* Actually, the window should already be disabled */
-		bh->ci->disable_window_32bit(bh, win_tab[bus][0]);
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size > 0) {
-			mv64x60_set_32bit_window(bh, win_tab[bus][i+1],
-				pi->pci_mem[i].cpu_base, pi->pci_mem[i].size,
-				pi->pci_mem[i].swap);
-			mv64x60_set_64bit_window(bh, remap_tab[bus][i+1],
-				pi->pci_mem[i].pci_base_hi,
-				pi->pci_mem[i].pci_base_lo, 0, 0);
-			bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]);
-		} else /* Actually, the window should already be disabled */
-			bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]);
-}
-
-/*
- *****************************************************************************
- *
- *	PCI->System MEM Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_pci2mem_windows()
- *
- * Configure the PCI->Memory windows on the bridge.
- */
-static u32 pci_acc_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_ACC_CNTL_0_WIN, MV64x60_PCI02MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI02MEM_ACC_CNTL_2_WIN, MV64x60_PCI02MEM_ACC_CNTL_3_WIN },
-	{ MV64x60_PCI12MEM_ACC_CNTL_0_WIN, MV64x60_PCI12MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI12MEM_ACC_CNTL_2_WIN, MV64x60_PCI12MEM_ACC_CNTL_3_WIN }
-};
-
-static u32 pci_snoop_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_SNOOP_0_WIN, MV64x60_PCI02MEM_SNOOP_1_WIN,
-	  MV64x60_PCI02MEM_SNOOP_2_WIN, MV64x60_PCI02MEM_SNOOP_3_WIN },
-	{ MV64x60_PCI12MEM_SNOOP_0_WIN, MV64x60_PCI12MEM_SNOOP_1_WIN,
-	  MV64x60_PCI12MEM_SNOOP_2_WIN, MV64x60_PCI12MEM_SNOOP_3_WIN }
-};
-
-static u32 pci_size_tab[2][4] __initdata = {
-	{ MV64x60_PCI0_MEM_0_SIZE, MV64x60_PCI0_MEM_1_SIZE,
-	  MV64x60_PCI0_MEM_2_SIZE, MV64x60_PCI0_MEM_3_SIZE },
-	{ MV64x60_PCI1_MEM_0_SIZE, MV64x60_PCI1_MEM_1_SIZE,
-	  MV64x60_PCI1_MEM_2_SIZE, MV64x60_PCI1_MEM_3_SIZE }
-};
-
-void __init
-mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
-	struct pci_controller *hose, struct mv64x60_pci_info *pi,
-	u32 bus, u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/*
-	 * Set the access control, snoop, BAR size, and window base addresses.
-	 * PCI->MEM windows base addresses will match exactly what the
-	 * CPU->MEM windows are.
-	 */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_64bit_window(bh,
-				pci_acc_tab[bus][i], 0,
-				mem_windows[i][0], mem_windows[i][1],
-				pi->acc_cntl_options[i]);
-			bh->ci->enable_window_64bit(bh, pci_acc_tab[bus][i]);
-
-			if (bh->ci->window_tab_64bit[
-				pci_snoop_tab[bus][i]].base_lo_reg != 0) {
-
-				mv64x60_set_64bit_window(bh,
-					pci_snoop_tab[bus][i], 0,
-					mem_windows[i][0], mem_windows[i][1],
-					pi->snoop_options[i]);
-				bh->ci->enable_window_64bit(bh,
-					pci_snoop_tab[bus][i]);
-			}
-
-			bh->ci->set_pci2mem_window(hose, bus, i,
-				mem_windows[i][0]);
-			mv64x60_write(bh, pci_size_tab[bus][i],
-				mv64x60_mask(mem_windows[i][1] - 1, 20));
-
-			/* Enable the window */
-			mv64x60_clr_bits(bh, ((bus == 0) ?
-				MV64x60_PCI0_BAR_ENABLE :
-				MV64x60_PCI1_BAR_ENABLE), (1 << i));
-		}
-}
-
-/*
- *****************************************************************************
- *
- *	Hose & Resource Alloc/Init Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_alloc_hoses()
- *
- * Allocate the PCI hose structures for the bridge's PCI buses.
- */
-void __init
-mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data,
-	struct pci_controller **hose)
-{
-	*hose = pcibios_alloc_controller();
-	setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr,
-		bh->v_base + cfg_data);
-}
-
-/*
- * mv64x60_config_resources()
- *
- * Calculate the offsets, etc. for the hose structures to reflect all of
- * the address remapping that happens as you go from CPU->PCI and PCI->MEM.
- */
-void __init
-mv64x60_config_resources(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi, u32 io_base)
-{
-	int		i;
-	/* 2 hoses; 4 resources/hose; string <= 64 bytes */
-	static char	s[2][4][64];
-
-	if (pi->pci_io.size != 0) {
-		sprintf(s[hose->index][0], "PCI hose %d I/O Space",
-			hose->index);
-		pci_init_resource(&hose->io_resource, io_base - isa_io_base,
-			io_base - isa_io_base + pi->pci_io.size - 1,
-			IORESOURCE_IO, s[hose->index][0]);
-		hose->io_space.start = pi->pci_io.pci_base_lo;
-		hose->io_space.end = pi->pci_io.pci_base_lo + pi->pci_io.size-1;
-		hose->io_base_phys = pi->pci_io.cpu_base;
-		hose->io_base_virt = (void *)isa_io_base;
-	}
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size != 0) {
-			sprintf(s[hose->index][i+1], "PCI hose %d MEM Space %d",
-				hose->index, i);
-			pci_init_resource(&hose->mem_resources[i],
-				pi->pci_mem[i].cpu_base,
-				pi->pci_mem[i].cpu_base + pi->pci_mem[i].size-1,
-				IORESOURCE_MEM, s[hose->index][i+1]);
-		}
-
-	hose->mem_space.end = pi->pci_mem[0].pci_base_lo +
-						pi->pci_mem[0].size - 1;
-	hose->pci_mem_offset = pi->pci_mem[0].cpu_base -
-						pi->pci_mem[0].pci_base_lo;
-}
-
-/*
- * mv64x60_config_pci_params()
- *
- * Configure a hose's PCI config space parameters.
- */
-void __init
-mv64x60_config_pci_params(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi)
-{
-	u32	devfn;
-	u16	u16_val;
-	u8	save_exclude;
-
-	devfn = PCI_DEVFN(0,0);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	/* Set class code to indicate host bridge */
-	u16_val = PCI_CLASS_BRIDGE_HOST; /* 0x0600 (host bridge) */
-	early_write_config_word(hose, 0, devfn, PCI_CLASS_DEVICE, u16_val);
-
-	/* Enable bridge to be PCI master & respond to PCI MEM cycles */
-	early_read_config_word(hose, 0, devfn, PCI_COMMAND, &u16_val);
-	u16_val &= ~(PCI_COMMAND_IO | PCI_COMMAND_INVALIDATE |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
-	u16_val |= pi->pci_cmd_bits | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
-
-	/* Set latency timer, cache line size, clear BIST */
-	u16_val = (pi->latency_timer << 8) | (L1_CACHE_BYTES >> 2);
-	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- *****************************************************************************
- *
- *	PCI Related Routine
- *
- *****************************************************************************
- */
-/*
- * mv64x60_set_bus()
- *
- * Set the bus number for the hose directly under the bridge.
- */
-void __init
-mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus)
-{
-	struct pci_controller	*hose;
-	u32	pci_mode, p2p_cfg, pci_cfg_offset, val;
-	u8	save_exclude;
-
-	if (bus == 0) {
-		pci_mode = bh->pci_mode_a;
-		p2p_cfg = MV64x60_PCI0_P2P_CONFIG;
-		pci_cfg_offset = 0x64;
-		hose = bh->hose_a;
-	} else {
-		pci_mode = bh->pci_mode_b;
-		p2p_cfg = MV64x60_PCI1_P2P_CONFIG;
-		pci_cfg_offset = 0xe4;
-		hose = bh->hose_b;
-	}
-
-	child_bus &= 0xff;
-	val = mv64x60_read(bh, p2p_cfg);
-
-	if (pci_mode == MV64x60_PCIMODE_CONVENTIONAL) {
-		val &= 0xe0000000; /* Force dev num to 0, turn off P2P bridge */
-		val |= (child_bus << 16) | 0xff;
-		mv64x60_write(bh, p2p_cfg, val);
-		(void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */
-	} else { /* PCI-X */
-		/*
-		 * Need to use the current bus/dev number (that's in the
-		 * P2P CONFIG reg) to access the bridge's pci config space.
-		 */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(hose, (val & 0x00ff0000) >> 16,
-			PCI_DEVFN(((val & 0x1f000000) >> 24), 0),
-			pci_cfg_offset, child_bus << 8);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	}
-}
-
-/*
- * mv64x60_pci_exclude_device()
- *
- * This routine is used to make the bridge not appear when the
- * PCI subsystem is accessing PCI devices (in PCI config space).
- */
-int
-mv64x60_pci_exclude_device(u8 bus, u8 devfn)
-{
-	struct pci_controller	*hose;
-
-	hose = pci_bus_to_hose(bus);
-
-	/* Skip slot 0 on both hoses */
-	if ((mv64x60_pci_exclude_bridge == 1) && (PCI_SLOT(devfn) == 0) &&
-		(hose->first_busno == bus))
-
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-} /* mv64x60_pci_exclude_device() */
-
-/*
- *****************************************************************************
- *
- *	Platform Device Routines
- *
- *****************************************************************************
- */
-
-/*
- * mv64x60_pd_fixup()
- *
- * Need to add the base addr of where the bridge's regs are mapped in the
- * physical addr space so drivers can ioremap() them.
- */
-void __init
-mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[],
-	u32 entries)
-{
-	struct resource	*r;
-	u32		i, j;
-
-	for (i=0; i<entries; i++) {
-		j = 0;
-
-		while ((r = platform_get_resource(pd_devs[i],IORESOURCE_MEM,j))
-			!= NULL) {
-
-			r->start += bh->p_base;
-			r->end += bh->p_base;
-			j++;
-		}
-	}
-}
-
-/*
- * mv64x60_add_pds()
- *
- * Add the mv64x60 platform devices to the list of platform devices.
- */
-static int __init
-mv64x60_add_pds(void)
-{
-	return platform_add_devices(mv64x60_pd_devs,
-		ARRAY_SIZE(mv64x60_pd_devs));
-}
-arch_initcall(mv64x60_add_pds);
-
-/*
- *****************************************************************************
- *
- *	GT64260-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * gt64260_translate_size()
- *
- * On the GT64260, the size register is really the "top" address of the window.
- */
-static u32 __init
-gt64260_translate_size(u32 base, u32 size, u32 num_bits)
-{
-	return base + mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * gt64260_untranslate_size()
- *
- * Translate the top address of a window into a window size.
- */
-static u32 __init
-gt64260_untranslate_size(u32 base, u32 size, u32 num_bits)
-{
-	if (size >= base)
-		size = size - base + (1 << (32 - num_bits));
-	else
-		size = 0;
-
-	return size;
-}
-
-/*
- * gt64260_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-static u32 gt64260_reg_addrs[2][4] __initdata = {
-	{ 0x10, 0x14, 0x18, 0x1c }, { 0x90, 0x94, 0x98, 0x9c }
-};
-
-static void __init
-gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
-		gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 gt64260_offset[2] __initdata = {0x20, 0xa0};
-
-static void __init
-gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus],
-		(base << 16));
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_is_enabled_32bit()
- *
- * On a GT64260, a window is enabled iff its top address is >= to its base
- * address.
- */
-static u32 __init
-gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	rc = 0;
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0) &&
-		((mv64x60_read(bh, gt64260_32bit_windows[window].size_reg) &
-			((1 << gt64260_32bit_windows[window].size_bits) - 1)) >=
-		 (mv64x60_read(bh, gt64260_32bit_windows[window].base_reg) &
-			((1 << gt64260_32bit_windows[window].base_bits) - 1))))
-
-		rc = 1;
-
-	return rc;
-}
-
-/*
- * gt64260_enable_window_32bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 32bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_32bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_32bit_windows[window].base_reg,
-		gt64260_32bit_windows[window].size_reg);
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff);
-		mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_enable_window_64bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_64bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_64bit_windows[window].base_lo_reg,
-		gt64260_64bit_windows[window].size_reg);
-
-	if ((gt64260_64bit_windows[window].base_lo_reg != 0) &&
-		(gt64260_64bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_lo_reg,
-									0xfff);
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0);
-		mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_disable_all_windows()
- *
- * The GT64260 has several windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	i, preserve;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			gt64260_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			gt64260_disable_window_64bit(bh, i);
-
-	/* Turn off cpu protection windows not in gt64260_32bit_windows[] */
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_4, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_4, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_5, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_5, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_6, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_6, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_7, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_7, 0);
-
-	/* Turn off PCI->MEM access cntl wins not in gt64260_64bit_windows[] */
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_SIZE, 0);
-
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_SIZE, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x07fffdff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x07fffdff);
-
-	/*
-	 * Some firmwares enable a bunch of intr sources
-	 * for the PCI INT output pins.
-	 */
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_0_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0);
-}
-
-/*
- * gt64260a_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260A.
- */
-static void __init
-gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.mirror_regs = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.mirror_regs = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- * gt64260b_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260B.
- */
-static void __init
-gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH, 0xf);
-
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	/*
-	 * The 64260B is not supposed to have the bug where the MPSC & ENET
-	 * can't access cache coherent regions.  However, testing has shown
-	 * that the MPSC, at least, still has this bug.
-	 */
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- *****************************************************************************
- *
- *	MV64360-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * mv64360_translate_size()
- *
- * On the MV64360, the size register is set similar to the size you get
- * from a pci config space BAR register.  That is, programmed from LSB to MSB
- * as a sequence of 1's followed by a sequence of 0's. IOW, "size -1" with the
- * assumption that the size is a power of 2.
- */
-static u32 __init
-mv64360_translate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	return mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * mv64360_untranslate_size()
- *
- * Translate the size register value of a window into a window size.
- */
-static u32 __init
-mv64360_untranslate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	if (size > 0) {
-		size >>= (32 - num_bits);
-		size++;
-		size <<= (32 - num_bits);
-	}
-
-	return size;
-}
-
-/*
- * mv64360_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-struct {
-	u32	fcn;
-	u32	base_hi_bar;
-	u32	base_lo_bar;
-} static mv64360_reg_addrs[2][4] __initdata = {
-	{{ 0, 0x14, 0x10 }, { 0, 0x1c, 0x18 },
-	 { 1, 0x14, 0x10 }, { 1, 0x1c, 0x18 }},
-	{{ 0, 0x94, 0x90 }, { 0, 0x9c, 0x98 },
-	 { 1, 0x94, 0x90 }, { 1, 0x9c, 0x98 }}
-};
-
-static void __init
-mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8 save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_hi_bar, 0);
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_lo_bar,
-		mv64x60_mask(base,20) | 0xc);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 mv64360_offset[2][2] __initdata = {{0x20, 0x24}, {0xa0, 0xa4}};
-
-static void __init
-mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][0], (base << 16));
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][1], 0);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_is_enabled_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- * Note that this doesn't work for windows on the PCI slave side but we don't
- * check those so its okay.
- */
-static u32 __init
-mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra, rc = 0;
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			rc = (mv64x60_read(bh, MV64360_CPU_BAR_ENABLE) &
-				(1 << (extra & 0x1f))) == 0;
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			rc = (mv64x60_read(bh,
-				mv64360_32bit_windows[window].base_reg) &
-					(1 << (extra & 0x1f))) != 0;
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			rc = (mv64x60_read(bh, MV64360_ENET2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			rc = (mv64x60_read(bh, MV64360_MPSC2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x3))) == 0;
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			rc = (mv64x60_read(bh, MV64360_IDMA2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_is_enabled: %s\n",
-				"32bit table corrupted");
-		}
-	}
-
-	return rc;
-}
-
-/*
- * mv64360_enable_window_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- */
-static void __init
-mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("enable 32bit window: %d\n", window);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_clr_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_set_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_clr_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_clr_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_clr_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_disable_window_32bit()
- *
- * On a MV64360, a window is disabled by either setting a bit in the
- * CPU BAR Enable reg or clearing a bit in the window's base reg.
- */
-static void __init
-mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_32bit_windows[window].base_reg,
-		mv64360_32bit_windows[window].size_reg);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_set_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_clr_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_enable_window_64bit()
- *
- * On the MV64360, a 64-bit window is enabled by setting a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg!= 0) &&
-		(mv64360_64bit_windows[window].size_reg != 0)) {
-
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_set_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_window_64bit()
- *
- * On a MV64360, a 64-bit window is disabled by clearing a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_64bit_windows[window].base_lo_reg,
-		mv64360_64bit_windows[window].size_reg);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg != 0) &&
-			(mv64360_64bit_windows[window].size_reg != 0)) {
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_clr_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_all_windows()
- *
- * The MV64360 has a few windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	preserve, i;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			mv64360_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			mv64360_disable_window_64bit(bh, i);
-
-	/* Turn off PCI->MEM access cntl wins not in mv64360_64bit_windows[] */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff);
-}
-
-/*
- * mv64360_config_io2mem_windows()
- *
- * ENET, MPSC, and IDMA ctlrs on the MV64[34]60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- */
-static u32 enet_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_ENET2MEM_0_WIN, MV64x60_ENET2MEM_1_WIN,
-	MV64x60_ENET2MEM_2_WIN, MV64x60_ENET2MEM_3_WIN,
-};
-
-static u32 mpsc_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_MPSC2MEM_0_WIN, MV64x60_MPSC2MEM_1_WIN,
-	MV64x60_MPSC2MEM_2_WIN, MV64x60_MPSC2MEM_3_WIN,
-};
-
-static u32 idma_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_IDMA2MEM_0_WIN, MV64x60_IDMA2MEM_1_WIN,
-	MV64x60_IDMA2MEM_2_WIN, MV64x60_IDMA2MEM_3_WIN,
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] __initdata =
-	{ 0xe, 0xd, 0xb, 0x7 };
-
-static void __init
-mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	pr_debug("config_io2regs_windows: enet, mpsc, idma -> bridge regs\n");
-
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_2, 0);
-
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_1, 0);
-
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_2, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_3, 0);
-
-	/* Assume that mem ctlr has no more windows than embedded I/O ctlr */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, enet_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->enet_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, enet_tab[i]);
-
-			/* Give enet r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, mpsc_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->mpsc_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, mpsc_tab[i]);
-
-			/* Give mpsc r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, idma_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->idma_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, idma_tab[i]);
-
-			/* Give idma r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3,
-				(0x3 << (i << 1)));
-		}
-}
-
-/*
- * mv64360_set_mpsc2regs_window()
- *
- * MPSC has a window to the bridge's internal registers.  Call this routine
- * to change that window so it doesn't conflict with the windows mapping the
- * mpsc to system memory.
- */
-static void __init
-mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base)
-{
-	pr_debug("set mpsc->internal regs, base: 0x%x\n", base);
-	mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000);
-}
-
-/*
- * mv64360_chip_specific_init()
- *
- * Implement errata workarounds for the MV64360.
- */
-static void __init
-mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-/*
- * mv64460_chip_specific_init()
- *
- * Implement errata workarounds for the MV64460.
- */
-static void __init
-mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24) | (1<<25));
-	mv64x60_set_bits(bh, MV64460_D_UNIT_MMASK, (1<<1) | (1<<4));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-/* Export the hotswap register via sysfs for enum event monitoring */
-#define	VAL_LEN_MAX	11 /* 32-bit hex or dec stringified number + '\n' */
-
-static DEFINE_MUTEX(mv64xxx_hs_lock);
-
-static ssize_t
-mv64xxx_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count < VAL_LEN_MAX)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_read_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	mv64x60_pci_exclude_bridge = save_exclude;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t
-mv64xxx_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count <= 0)
-		return -EINVAL;
-
-	if (sscanf(buf, "%i", &v) == 1) {
-		if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-			return -ERESTARTSYS;
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-				MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-		mutex_unlock(&mv64xxx_hs_lock);
-	}
-	else
-		count = -EINVAL;
-
-	return count;
-}
-
-static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */
-	.attr = {
-		.name = "hs_reg",
-		.mode = S_IRUGO | S_IWUSR,
-	},
-	.size  = VAL_LEN_MAX,
-	.read  = mv64xxx_hs_reg_read,
-	.write = mv64xxx_hs_reg_write,
-};
-
-/* Provide sysfs file indicating if this platform supports the hs_reg */
-static ssize_t
-mv64xxx_hs_reg_valid_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device	*pdev;
-	struct mv64xxx_pdata	*pdp;
-	u32			v;
-
-	pdev = container_of(dev, struct platform_device, dev);
-	pdp = (struct mv64xxx_pdata *)pdev->dev.platform_data;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	v = pdp->hs_reg_valid;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "%i\n", v);
-}
-static DEVICE_ATTR(hs_reg_valid, S_IRUGO, mv64xxx_hs_reg_valid_show, NULL);
-
-static int __init
-mv64xxx_sysfs_init(void)
-{
-	sysfs_create_bin_file(&mv64xxx_device.dev.kobj, &mv64xxx_hs_reg_attr);
-	sysfs_create_file(&mv64xxx_device.dev.kobj,&dev_attr_hs_reg_valid.attr);
-	return 0;
-}
-subsys_initcall(mv64xxx_sysfs_init);
-#endif
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
deleted file mode 100644
index e1876261e5dc..000000000000
--- a/arch/ppc/syslib/mv64x60_dbg.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- *****************************************************************************
- *
- *	Low-level MPSC/UART I/O routines
- *
- *****************************************************************************
- */
-
-
-#include <linux/irq.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-
-#define	MPSC_CHR_1	0x000c
-#define	MPSC_CHR_2	0x0010
-
-static struct mv64x60_handle	mv64x60_dbg_bh;
-
-void
-mv64x60_progress_init(u32 base)
-{
-	mv64x60_dbg_bh.v_base = base;
-	return;
-}
-
-static void
-mv64x60_polled_putc(int chan, char c)
-{
-	u32	offset;
-
-	if (chan == 0)
-		offset = 0x8000;
-	else
-		offset = 0x9000;
-
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_1, (u32)c);
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_2, 0x200);
-	udelay(2000);
-}
-
-void
-mv64x60_mpsc_progress(char *s, unsigned short hex)
-{
-	volatile char	c;
-
-	mv64x60_polled_putc(0, '\r');
-
-	while ((c = *s++) != 0)
-		mv64x60_polled_putc(0, c);
-
-	mv64x60_polled_putc(0, '\n');
-	mv64x60_polled_putc(0, '\r');
-
-	return;
-}
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-#if defined(CONFIG_KGDB)
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-void
-putDebugChar(unsigned char c)
-{
-	mv64x60_polled_putc(KGDB_PORT, (char)c);
-}
-
-int
-getDebugChar(void)
-{
-	unsigned char	c;
-
-	while (!mv64x60_polled_getc(KGDB_PORT, &c));
-	return (int)c;
-}
-
-void
-putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-void
-kgdb_interruptible(int enable)
-{
-}
-
-void
-kgdb_map_scc(void)
-{
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-}
-#endif	/* CONFIG_KGDB */
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
deleted file mode 100644
index 4bf1ad17bf1a..000000000000
--- a/arch/ppc/syslib/mv64x60_win.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * Tables with info on how to manipulate the 32 & 64 bit windows on the
- * various types of Marvell bridge chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/mv643xx.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-/*
- *****************************************************************************
- *
- *	Tables describing how to set up windows on each type of bridge
- *
- *****************************************************************************
- */
-struct mv64x60_32bit_window
-	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->SRAM Window (64260 has no integrated SRAM) */
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Snoop Windows */
-	[MV64x60_CPU_SNOOP_0_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_0,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_1_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_1,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_2_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_2,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_3_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_3,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->SRAM Window (64260 doesn't have separate windows) */
-	/* MPSC->SRAM Window (64260 doesn't have separate windows) */
-	/* IDMA->SRAM Window (64260 doesn't have separate windows) */
-};
-
-struct mv64x60_64bit_window
-	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Snoop Windows */
-	[MV64x60_PCI02MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Snoop Windows */
-	[MV64x60_PCI12MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-};
-
-struct mv64x60_32bit_window
-	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 1 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 2 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 3 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 4 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 5 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 6 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 7 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 8 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 9 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 10 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 11 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 12 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 13 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 14 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 15 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 16 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 17 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 18 },
-	/* CPU->SRAM Window */
-	[MV64x60_CPU2SRAM_WIN] = {
-		.base_reg		= MV64360_CPU2SRAM_BASE,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 19 },
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	/* CPU Snoop Windows -- don't exist on 64360 */
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->System Memory Windows */
-	[MV64x60_ENET2MEM_0_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_0_BASE,
-		.size_reg		= MV64360_ENET2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 0 },
-	[MV64x60_ENET2MEM_1_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_1_BASE,
-		.size_reg		= MV64360_ENET2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 1 },
-	[MV64x60_ENET2MEM_2_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_2_BASE,
-		.size_reg		= MV64360_ENET2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 2 },
-	[MV64x60_ENET2MEM_3_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_3_BASE,
-		.size_reg		= MV64360_ENET2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 3 },
-	[MV64x60_ENET2MEM_4_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_4_BASE,
-		.size_reg		= MV64360_ENET2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 4 },
-	[MV64x60_ENET2MEM_5_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_5_BASE,
-		.size_reg		= MV64360_ENET2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 5 },
-	/* MPSC->System Memory Windows */
-	[MV64x60_MPSC2MEM_0_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_0_BASE,
-		.size_reg		= MV64360_MPSC2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 0 },
-	[MV64x60_MPSC2MEM_1_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_1_BASE,
-		.size_reg		= MV64360_MPSC2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 1 },
-	[MV64x60_MPSC2MEM_2_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_2_BASE,
-		.size_reg		= MV64360_MPSC2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 2 },
-	[MV64x60_MPSC2MEM_3_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_3_BASE,
-		.size_reg		= MV64360_MPSC2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 3 },
-	/* IDMA->System Memory Windows */
-	[MV64x60_IDMA2MEM_0_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_0_BASE,
-		.size_reg		= MV64360_IDMA2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 0 },
-	[MV64x60_IDMA2MEM_1_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_1_BASE,
-		.size_reg		= MV64360_IDMA2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 1 },
-	[MV64x60_IDMA2MEM_2_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_2_BASE,
-		.size_reg		= MV64360_IDMA2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 2 },
-	[MV64x60_IDMA2MEM_3_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_3_BASE,
-		.size_reg		= MV64360_IDMA2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 3 },
-	[MV64x60_IDMA2MEM_4_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_4_BASE,
-		.size_reg		= MV64360_IDMA2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 4 },
-	[MV64x60_IDMA2MEM_5_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_5_BASE,
-		.size_reg		= MV64360_IDMA2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 5 },
-	[MV64x60_IDMA2MEM_6_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_6_BASE,
-		.size_reg		= MV64360_IDMA2MEM_6_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 6 },
-	[MV64x60_IDMA2MEM_7_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_7_BASE,
-		.size_reg		= MV64360_IDMA2MEM_7_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 7 },
-};
-
-struct mv64x60_64bit_window
-	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 0->MEM Snoop Windows -- don't exist on 64360 */
-	/* PCI 1->MEM Snoop Windows -- don't exist on 64360 */
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
deleted file mode 100644
index a6fb7dcfa738..000000000000
--- a/arch/ppc/syslib/ocp.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * ocp.c
- *
- *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *          Mipsys - France
- *
- *          Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- *          Additional support and port to 2.6 LDM/sysfs by
- *          Matt Porter <mporter@kernel.crashing.org>
- *          Copyright 2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  OCP (On Chip Peripheral) is a software emulated "bus" with a
- *  pseudo discovery method for dumb peripherals. Usually these type
- *  of peripherals are found on embedded SoC (System On a Chip)
- *  processors or highly integrated system controllers that have
- *  a host bridge and many peripherals.  Common examples where
- *  this is already used include the PPC4xx, MPC52xx,
- *  and MV64xxx parts.
- *
- *  This subsystem creates a standard OCP bus type within the
- *  device model.  The devices on the OCP bus are seeded by an
- *  an initial OCP device array created by the arch-specific
- *  Device entries can be added/removed/modified through OCP
- *  helper functions to accommodate system and  board-specific
- *  parameters commonly found in embedded systems. OCP also
- *  provides a standard method for devices to describe extended
- *  attributes about themselves to the system.  A standard access
- *  method allows OCP drivers to obtain the information, both
- *  SoC-specific and system/board-specific, needed for operation.
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/errno.h>
-
-//#define DBG(x)	printk x
-#define DBG(x)
-
-extern int mem_init_done;
-
-extern struct ocp_def core_ocp[];	/* Static list of devices, provided by
-					   CPU core */
-
-LIST_HEAD(ocp_devices);			/* List of all OCP devices */
-DECLARE_RWSEM(ocp_devices_sem);		/* Global semaphores for those lists */
-
-static int ocp_inited;
-
-/* Sysfs support */
-#define OCP_DEF_ATTR(field, format_string)				\
-static ssize_t								\
-show_##field(struct device *dev, struct device_attribute *attr, char *buf)				\
-{									\
-	struct ocp_device *odev = to_ocp_dev(dev);			\
-									\
-	return sprintf(buf, format_string, odev->def->field);		\
-}									\
-static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-
-OCP_DEF_ATTR(vendor, "0x%04x\n");
-OCP_DEF_ATTR(function, "0x%04x\n");
-OCP_DEF_ATTR(index, "0x%04x\n");
-#ifdef CONFIG_PTE_64BIT
-OCP_DEF_ATTR(paddr, "0x%016Lx\n");
-#else
-OCP_DEF_ATTR(paddr, "0x%08lx\n");
-#endif
-OCP_DEF_ATTR(irq, "%d\n");
-OCP_DEF_ATTR(pm, "%lu\n");
-
-void ocp_create_sysfs_dev_files(struct ocp_device *odev)
-{
-	struct device *dev = &odev->dev;
-
-	/* Current OCP device def attributes */
-	device_create_file(dev, &dev_attr_vendor);
-	device_create_file(dev, &dev_attr_function);
-	device_create_file(dev, &dev_attr_index);
-	device_create_file(dev, &dev_attr_paddr);
-	device_create_file(dev, &dev_attr_irq);
-	device_create_file(dev, &dev_attr_pm);
-	/* Current OCP device additions attributes */
-	if (odev->def->additions && odev->def->show)
-		odev->def->show(dev);
-}
-
-/**
- *	ocp_device_match	-	Match one driver to one device
- *	@drv: driver to match
- *	@dev: device to match
- *
- *	This function returns 0 if the driver and device don't match
- */
-static int
-ocp_device_match(struct device *dev, struct device_driver *drv)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(drv);
-	const struct ocp_device_id *ids = ocp_drv->id_table;
-
-	if (!ids)
-		return 0;
-
-	while (ids->vendor || ids->function) {
-		if ((ids->vendor == OCP_ANY_ID
-		     || ids->vendor == ocp_dev->def->vendor)
-		    && (ids->function == OCP_ANY_ID
-			|| ids->function == ocp_dev->def->function))
-		        return 1;
-		ids++;
-	}
-	return 0;
-}
-
-static int
-ocp_device_probe(struct device *dev)
-{
-	int error = 0;
-	struct ocp_driver *drv;
-	struct ocp_device *ocp_dev;
-
-	drv = to_ocp_drv(dev->driver);
-	ocp_dev = to_ocp_dev(dev);
-
-	if (drv->probe) {
-		error = drv->probe(ocp_dev);
-		if (error >= 0) {
-			ocp_dev->driver = drv;
-			error = 0;
-		}
-	}
-	return error;
-}
-
-static int
-ocp_device_remove(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
-	if (ocp_dev->driver) {
-		if (ocp_dev->driver->remove)
-			ocp_dev->driver->remove(ocp_dev);
-		ocp_dev->driver = NULL;
-	}
-	return 0;
-}
-
-static int
-ocp_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->suspend)
-		return ocp_drv->suspend(ocp_dev, state);
-	return 0;
-}
-
-static int
-ocp_device_resume(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->resume)
-		return ocp_drv->resume(ocp_dev);
-	return 0;
-}
-
-struct bus_type ocp_bus_type = {
-	.name = "ocp",
-	.match = ocp_device_match,
-	.probe = ocp_device_probe,
-	.remove = ocp_device_remove,
-	.suspend = ocp_device_suspend,
-	.resume = ocp_device_resume,
-};
-
-/**
- *	ocp_register_driver	-	Register an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's probe() callback is called either recursively
- *	by this function or upon later call of ocp_driver_init
- *
- *	NOTE: Detection of devices is a 2 pass step on this implementation,
- *	hotswap isn't supported. First, all OCP devices are put in the device
- *	list, _then_ all drivers are probed on each match.
- */
-int
-ocp_register_driver(struct ocp_driver *drv)
-{
-	/* initialize common driver fields */
-	drv->driver.name = drv->name;
-	drv->driver.bus = &ocp_bus_type;
-
-	/* register with core */
-	return driver_register(&drv->driver);
-}
-
-/**
- *	ocp_unregister_driver	-	Unregister an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's remove() callback is called recursively
- *	by this function for any device already registered
- */
-void
-ocp_unregister_driver(struct ocp_driver *drv)
-{
-	DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
-
-	driver_unregister(&drv->driver);
-
-	DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
-}
-
-/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
-static struct ocp_device *
-__ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct list_head	*entry;
-	struct ocp_device	*dev, *found = NULL;
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
-			continue;
-		if (function != OCP_ANY_ID && function != dev->def->function)
-			continue;
-		if (index != OCP_ANY_INDEX && index != dev->def->index)
-			continue;
-		found = dev;
-		break;
-	}
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_find_device	-	Find a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given function by it's
- *	index, it's typically used to find the MAL or ZMII associated
- *	with an EMAC or similar horrors.
- *      You can pass vendor, though you usually want OCP_ANY_ID there...
- */
-struct ocp_device *
-ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-
-	down_read(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	up_read(&ocp_devices_sem);
-
-	return dev;
-}
-
-/**
- *	ocp_get_one_device -	Find a def by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given ocp_def by it's
- *	vendor, function, and index.  The main purpose for is to
- *	allow modification of the def before binding to the driver
- */
-struct ocp_def *
-ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-	struct ocp_def		*found = NULL;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
-		vendor, function, index));
-
-	dev = ocp_find_device(vendor, function, index);
-
-	if (dev)
-		found = dev->def;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
-		vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_add_one_device	-	Add a device
- *	@def: static device definition structure
- *
- *	This function adds a device definition to the
- *	device list. It may only be called before
- *	ocp_driver_init() and will return an error
- *	otherwise.
- */
-int
-ocp_add_one_device(struct ocp_def *def)
-{
-	struct	ocp_device	*dev;
-
-	DBG(("ocp: ocp_add_one_device()...\n"));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	if (mem_init_done)
-		dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	else
-		dev = alloc_bootmem(sizeof(*dev));
-
-	if (dev == NULL)
-		return 1;
-	memset(dev, 0, sizeof(*dev));
-	dev->def = def;
-	dev->current_state = 4;
-	sprintf(dev->name, "OCP device %04x:%04x:%04x",
-		dev->def->vendor, dev->def->function, dev->def->index);
-	down_write(&ocp_devices_sem);
-	list_add_tail(&dev->link, &ocp_devices);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_add_one_device()...done\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_remove_one_device -	Remove a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows removal of a given function by its
- *	index. It may only be called before ocp_driver_init()
- *	and will return an error otherwise.
- */
-int
-ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device *dev;
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	down_write(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	list_del(&dev->link);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
-
-	return 0;
-}
-
-/**
- *	ocp_for_each_device	-	Iterate over OCP devices
- *	@callback: routine to execute for each ocp device.
- *	@arg: user data to be passed to callback routine.
- *
- *	This routine holds the ocp_device semaphore, so the
- *	callback routine cannot modify the ocp_device list.
- */
-void
-ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
-{
-	struct list_head *entry;
-
-	if (callback) {
-		down_read(&ocp_devices_sem);
-		list_for_each(entry, &ocp_devices)
-			callback(list_entry(entry, struct ocp_device, link),
-				arg);
-		up_read(&ocp_devices_sem);
-	}
-}
-
-/**
- *	ocp_early_init	-	Init OCP device management
- *
- *	This function builds the list of devices before setup_arch.
- *	This allows platform code to modify the device lists before
- *	they are bound to drivers (changes to paddr, removing devices
- *	etc)
- */
-int __init
-ocp_early_init(void)
-{
-	struct ocp_def	*def;
-
-	DBG(("ocp: ocp_early_init()...\n"));
-
-	/* Fill the devices list */
-	for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
-		ocp_add_one_device(def);
-
-	DBG(("ocp: ocp_early_init()... done.\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_driver_init	-	Init OCP device management
- *
- *	This function is meant to be called via OCP bus registration.
- */
-static int __init
-ocp_driver_init(void)
-{
-	int ret = 0, index = 0;
-	struct device *ocp_bus;
-	struct list_head *entry;
-	struct ocp_device *dev;
-
-	if (ocp_inited)
-		return ret;
-	ocp_inited = 1;
-
-	DBG(("ocp: ocp_driver_init()...\n"));
-
-	/* Allocate/register primary OCP bus */
-	ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (ocp_bus == NULL)
-		return 1;
-	strcpy(ocp_bus->bus_id, "ocp");
-
-	bus_register(&ocp_bus_type);
-
-	device_register(ocp_bus);
-
-	/* Put each OCP device into global device list */
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		sprintf(dev->dev.bus_id, "%2.2x", index);
-		dev->dev.parent = ocp_bus;
-		dev->dev.bus = &ocp_bus_type;
-		device_register(&dev->dev);
-		ocp_create_sysfs_dev_files(dev);
-		index++;
-	}
-
-	DBG(("ocp: ocp_driver_init()... done.\n"));
-
-	return 0;
-}
-
-postcore_initcall(ocp_driver_init);
-
-EXPORT_SYMBOL(ocp_bus_type);
-EXPORT_SYMBOL(ocp_find_device);
-EXPORT_SYMBOL(ocp_register_driver);
-EXPORT_SYMBOL(ocp_unregister_driver);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
deleted file mode 100644
index 67dffe27b5c3..000000000000
--- a/arch/ppc/syslib/open_pic.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-#if defined(CONFIG_PRPMC800)
-#define OPENPIC_BIG_ENDIAN
-#endif
-
-void __iomem *OpenPIC_Addr;
-static volatile struct OpenPIC __iomem *OpenPIC = NULL;
-
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-u_int OpenPIC_NumInitSenses __initdata = 0;
-u_char *OpenPIC_InitSenses __initdata = NULL;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic_irq_offset;
-static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
-static int openpic_cascade_irq = -1;
-static int (*openpic_cascade_fn)(void);
-
-/* Global Operations */
-static void openpic_disable_8259_pass_through(void);
-static void openpic_set_spurious(u_int vector);
-
-#ifdef CONFIG_SMP
-/* Interprocessor Interrupts */
-static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id);
-#endif
-
-/* Timer Interrupts */
-static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic_maptimer(u_int timer, cpumask_t cpumask);
-
-/* Interrupt Sources */
-static void openpic_enable_irq(u_int irq);
-static void openpic_disable_irq(u_int irq);
-static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-#ifdef notused
-static void openpic_enable_8259_pass_through(void);
-static u_int openpic_get_spurious(void);
-static void openpic_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic_end_irq(unsigned int irq_nr);
-static void openpic_ack_irq(unsigned int irq_nr);
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-struct hw_interrupt_type open_pic = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_irq,
-	.disable	= openpic_disable_irq,
-	.ack		= openpic_ack_irq,
-	.end		= openpic_end_irq,
-	.set_affinity	= openpic_set_affinity,
-};
-
-#ifdef CONFIG_SMP
-static void openpic_end_ipi(unsigned int irq_nr);
-static void openpic_ack_ipi(unsigned int irq_nr);
-static void openpic_enable_ipi(unsigned int irq_nr);
-static void openpic_disable_ipi(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic_ipi = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_ipi,
-	.disable	= openpic_disable_ipi,
-	.ack		= openpic_ack_ipi,
-	.end		= openpic_end_ipi,
-};
-#endif /* CONFIG_SMP */
-
-/*
- *  Accesses to the current processor's openpic registers
- */
-#ifdef CONFIG_SMP
-#define THIS_CPU		Processor[cpu]
-#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
-#define CHECK_THIS_CPU		check_arg_cpu(cpu)
-#else
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-#endif /* CONFIG_SMP */
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-#define check_arg_irq(irq) \
-    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
-	|| ISR[irq - open_pic_irq_offset] == 0) { \
-      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
-      dump_stack(); }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
-	dump_stack(); }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-u_int openpic_read(volatile u_int __iomem *addr)
-{
-	u_int val;
-
-#ifdef OPENPIC_BIG_ENDIAN
-	val = in_be32(addr);
-#else
-	val = in_le32(addr);
-#endif
-	return val;
-}
-
-static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
-{
-#ifdef OPENPIC_BIG_ENDIAN
-	out_be32(addr, val);
-#else
-	out_le32(addr, val);
-#endif
-}
-
-static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
-{
-	u_int val = openpic_read(addr);
-	return val & mask;
-}
-
-inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic_read(addr);
-	openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, 0);
-}
-
-static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, mask);
-}
-
-static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
-				    u_int field)
-{
-	openpic_setfield(addr, OPENPIC_MASK);
-	while (openpic_read(addr) & OPENPIC_ACTIVITY);
-	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-#ifdef CONFIG_SMP
-/* yes this is right ... bug, feature, you decide! -- tgall */
-u_int openpic_read_IPI(volatile u_int __iomem * addr)
-{
-         u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN)
-        val = in_be32(addr);
-#else
-        val = in_le32(addr);
-#endif
-        return val;
-}
-
-/* because of the power3 be / le above, this is needed */
-inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
-{
-        u_int  val = openpic_read_IPI(addr);
-        openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, 0);
-}
-
-static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, mask);
-}
-
-static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
-{
-        openpic_setfield_IPI(addr, OPENPIC_MASK);
-
-        /* wait until it's not in use */
-        /* BenH: Is this code really enough ? I would rather check the result
-         *       and eventually retry ...
-         */
-        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
-
-        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-/* On platforms that may use EPIC serial mode, the default is enabled. */
-int epic_serial_mode = 1;
-
-static void __init openpic_eicr_set_clk(u_int clkval)
-{
-	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
-}
-
-static void __init openpic_enable_sie(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_SIE);
-}
-#endif
-
-#if defined(CONFIG_EPIC_SERIAL_MODE)
-static void openpic_reset(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-#endif
-
-void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
-{
-	volatile OpenPIC_Source __iomem *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC_Addr) {
-		printk("No OpenPIC found !\n");
-		return;
-	}
-	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	/* Have to start from ground zero.
-	*/
-	openpic_reset();
-#endif
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC);
-	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic_maptimer(i, CPU_MASK_NONE);
-	}
-
-#ifdef CONFIG_SMP
-	/* Initialize IPI interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
-	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
-		/* Disabled, increased priorities 10..13 */
-		openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
-				OPENPIC_VEC_IPI+i+offset);
-		/* IPIs are per-CPU */
-		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
-		irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
-	}
-#endif
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
-
-	openpic_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Default priority */
-		openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
-				(sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
-	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	openpic_disable_8259_pass_through();
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	if (epic_serial_mode) {
-		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
-		openpic_enable_sie();
-	}
-#endif
-	openpic_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
-}
-
-#ifdef notused
-static void openpic_enable_8259_pass_through(void)
-{
-	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-static void openpic_disable_8259_pass_through(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
-}
-
-u_int openpic_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-
-void openpic_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic_get_spurious(void)
-{
-	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-static void openpic_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-#ifdef CONFIG_SMP
-/*
- * Convert a cpu mask from logical to physical cpu numbers.
- */
-static inline cpumask_t physmask(cpumask_t cpumask)
-{
-	int i;
-	cpumask_t mask = CPU_MASK_NONE;
-
-	cpus_and(cpumask, cpu_online_map, cpumask);
-
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_isset(i, cpumask))
-			cpu_set(smp_hw_index[i], mask);
-
-	return mask;
-}
-#else
-#define physmask(cpumask)	(cpumask)
-#endif
-
-void openpic_reset_processor_phys(u_int mask)
-{
-	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
-}
-
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
-static DEFINE_SPINLOCK(openpic_setup_lock);
-#endif
-
-#ifdef CONFIG_SMP
-/*
- *  Initialize an interprocessor interrupt (and disable it)
- *
- *  ipi: OpenPIC interprocessor interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
-{
-	check_arg_ipi(ipi);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Send an IPI to one or more CPUs
- *
- *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
- *  and not a system-wide interrupt number
- */
-void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_ipi(ipi);
-	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
-		      cpus_addr(physmask(cpumask))[0]);
-}
-
-void openpic_request_IPIs(void)
-{
-	int i;
-
-	/*
-	 * Make sure this matches what is defined in smp.c for
-	 * smp_message_{pass|recv}() or what shows up in
-	 * /proc/interrupts will be wrong!!! --Troy */
-
-	if (OpenPIC == NULL)
-		return;
-
-	/*
- 	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI0 (call function)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI1 (reschedule)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI2 (invalidate tlb)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI3 (xmon break)", NULL);
-
-	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
-		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
-}
-
-/*
- * Do per-cpu setup for SMP systems.
- *
- * Get IPI's working and start taking interrupts.
- *   -- Cort
- */
-
-void __devinit do_openpic_setup_cpu(void)
-{
-#ifdef CONFIG_IRQ_ALL_CPUS
- 	int i;
-	cpumask_t msk = CPU_MASK_NONE;
-#endif
-	spin_lock(&openpic_setup_lock);
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-	cpu_set(smp_hw_index[smp_processor_id()], msk);
-
- 	/* let the openpic know we want intrs. default affinity
- 	 * is 0xffffffff until changed via /proc
- 	 * That's how it's done on x86. If we want it differently, then
- 	 * we should make sure we also change the default values of
-	 * irq_desc[].affinity in irq.c.
- 	 */
- 	for (i = 0; i < NumSources; i++)
-		openpic_mapirq(i, msk, CPU_MASK_ALL);
-#endif /* CONFIG_IRQ_ALL_CPUS */
- 	openpic_set_priority(0);
-
-	spin_unlock(&openpic_setup_lock);
-}
-#endif /* CONFIG_SMP */
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
-{
-	cpumask_t phys = physmask(cpumask);
-	check_arg_timer(timer);
-	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
-		      cpus_addr(phys)[0]);
-}
-
-/*
- * Change the priority of an interrupt
- */
-void __init
-openpic_set_irq_priority(u_int irq, u_int pri)
-{
-	check_arg_irq(irq);
-	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				pri << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-/*
- * Hookup a cascade to the OpenPIC.
- */
-
-static struct irqaction openpic_cascade_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-};
-
-void __init
-openpic_hookup_cascade(u_int irq, char *name,
-	int (*cascade_fn)(void))
-{
-	openpic_cascade_irq = irq;
-	openpic_cascade_fn = cascade_fn;
-
-	if (setup_irq(irq, &openpic_cascade_irqaction))
-		printk("Unable to get OpenPIC IRQ %d for cascade\n",
-				irq - open_pic_irq_offset);
-}
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic_enable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb(); /* sync is probably useless here */
-	} while (openpic_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic_disable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-#ifdef CONFIG_SMP
-/*
- *  Enable/disable an IPI interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-void openpic_enable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-
-}
-
-void openpic_disable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-}
-#endif
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (!cpus_empty(keepmask)) {
-		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
-		cpus_and(irqdest, irqdest, keepmask);
-		cpus_or(physmask, physmask, irqdest);
-	}
-	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic_ack_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	openpic_disable_irq(irq_nr);
-	openpic_eoi();
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_end_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq_nr].action)
-		openpic_enable_irq(irq_nr);
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
-{
-	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
-}
-
-#ifdef CONFIG_SMP
-static void openpic_ack_ipi(unsigned int irq_nr)
-{
-	openpic_eoi();
-}
-
-static void openpic_end_ipi(unsigned int irq_nr)
-{
-}
-
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id)
-{
-	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset);
-	return IRQ_HANDLED;
-}
-
-#endif /* CONFIG_SMP */
-
-int
-openpic_get_irq(void)
-{
-	int irq = openpic_irq();
-
-	/*
-	 * Check for the cascade interrupt and call the cascaded
-	 * interrupt controller function (usually i8259_irq) if so.
-	 * This should move to irq.c eventually.  -- paulus
-	 */
-	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
-		int cirq = openpic_cascade_fn();
-
-		/* Allow for the cascade being shared with other devices */
-		if (cirq != -1) {
-			irq = cirq;
-			openpic_eoi();
-		}
-	} else if (irq == OPENPIC_VEC_SPURIOUS)
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_SMP
-void
-smp_openpic_message_pass(int target, int msg)
-{
-	cpumask_t mask = CPU_MASK_ALL;
-	/* make sure we're sending something that translates to an IPI */
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		openpic_cause_IPI(msg, mask);
-		break;
-	case MSG_ALL_BUT_SELF:
-		cpu_clear(smp_processor_id(), mask);
-		openpic_cause_IPI(msg, mask);
-		break;
-	default:
-		openpic_cause_IPI(msg, cpumask_of_cpu(target));
-		break;
-	}
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
- 	openpic_set_priority(0xf);
-
-	open_pic.enable = openpic_cached_enable_irq;
-	open_pic.disable = openpic_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
-		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= OPENPIC_VEC_SPURIOUS);
-	
-	openpic_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic.enable = openpic_enable_irq;
-	open_pic.disable = openpic_disable_irq;
-
- 	openpic_set_priority(0);
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct sysdev_class openpic_sysclass = {
-	.name = "openpic",
-};
-
-static struct sys_device device_openpic = {
-	.id		= 0,
-	.cls		= &openpic_sysclass,
-};
-
-static struct sysdev_driver driver_openpic = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic_suspend,
-	.resume		= &openpic_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
-	rc = sysdev_class_register(&openpic_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
deleted file mode 100644
index 449075a04798..000000000000
--- a/arch/ppc/syslib/open_pic2.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- *  This is a duplicate of open_pic.c that deals with U3s MPIC on
- *  G5 PowerMacs. It's the same file except it's using big endian
- *  register accesses
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-void *OpenPIC2_Addr;
-static volatile struct OpenPIC *OpenPIC2 = NULL;
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-extern  u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic2_irq_offset;
-static volatile OpenPIC_Source *ISR[NR_IRQS];
-
-/* Global Operations */
-static void openpic2_disable_8259_pass_through(void);
-static void openpic2_set_priority(u_int pri);
-static void openpic2_set_spurious(u_int vector);
-
-/* Timer Interrupts */
-static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic2_maptimer(u_int timer, u_int cpumask);
-
-/* Interrupt Sources */
-static void openpic2_enable_irq(u_int irq);
-static void openpic2_disable_irq(u_int irq);
-static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-static void openpic2_reset(void);
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void);
-static u_int openpic2_get_priority(void);
-static u_int openpic2_get_spurious(void);
-static void openpic2_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic2_end_irq(unsigned int irq_nr);
-static void openpic2_ack_irq(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic2 = {
-	.typename = " OpenPIC2 ",
-	.enable = openpic2_enable_irq,
-	.disable = openpic2_disable_irq,
-	.ack = openpic2_ack_irq,
-	.end = openpic2_end_irq,
-};
-
-/*
- *  Accesses to the current processor's openpic registers
- *  On cascaded controller, this is only CPU 0
- */
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-extern unsigned long* _get_SP(void);
-#define check_arg_irq(irq) \
-    if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
-	|| ISR[irq - open_pic2_irq_offset] == 0) { \
-      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
-      /*print_backtrace(_get_SP());*/ }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
-	/*print_backtrace(_get_SP());*/ }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-static u_int openpic2_read(volatile u_int *addr)
-{
-	u_int val;
-
-	val = in_be32(addr);
-	return val;
-}
-
-static inline void openpic2_write(volatile u_int *addr, u_int val)
-{
-	out_be32(addr, val);
-}
-
-static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
-{
-	u_int val = openpic2_read(addr);
-	return val & mask;
-}
-
-inline void openpic2_writefield(volatile u_int *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic2_read(addr);
-	openpic2_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, 0);
-}
-
-static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, mask);
-}
-
-static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
-				    u_int field)
-{
-	openpic2_setfield(addr, OPENPIC_MASK);
-	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
-	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-static void openpic2_reset(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-
-void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
-{
-	volatile OpenPIC_Source *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic2_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC2_Addr) {
-		printk("No OpenPIC2 found !\n");
-		return;
-	}
-	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic2_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC2);
-	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic2_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic2_maptimer(i, 0);
-	}
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);
-
-	openpic2_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic2_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Priority 8 */
-		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic2_mapirq(i, 1<<0, 0);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic2;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
-	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);
-
-	openpic2_disable_8259_pass_through();
-	openpic2_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
-}
-
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void)
-{
-	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_disable_8259_pass_through(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic2_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic2_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
-}
-
-#ifdef notused
-static u_int openpic2_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-#endif /* notused */
-
-static void __init openpic2_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic2_get_spurious(void)
-{
-	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-static DEFINE_SPINLOCK(openpic2_setup_lock);
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic2_maptimer(u_int timer, u_int cpumask)
-{
-	check_arg_timer(timer);
-	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
-		      cpumask);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic2_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				9 << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic2_enable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-       	openpic2_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-       	do {
-       		mb(); /* sync is probably useless here */
-       	} while (openpic2_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic2_disable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-	openpic2_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (keepmask != 0)
-		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
-	openpic2_write(&ISR[irq]->Destination, physmask);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic2_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic2_ack_irq(unsigned int irq_nr)
-{
-	openpic2_disable_irq(irq_nr);
-	openpic2_eoi();
-}
-
-static void openpic2_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		openpic2_enable_irq(irq_nr);
-}
-
-int
-openpic2_get_irq(void)
-{
-	int irq = openpic2_irq();
-
-	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic2_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic2_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	open_pic2.enable = openpic2_cached_enable_irq;
-	open_pic2.disable = openpic2_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
-		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	openpic2_reset();
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
-	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));
-	
-	openpic2_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic2.enable = openpic2_enable_irq;
-	open_pic2.disable = openpic2_disable_irq;
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-/* HACK ALERT */
-static struct sysdev_class openpic2_sysclass = {
-	.name = "openpic2",
-};
-
-static struct sys_device device_openpic2 = {
-	.id		= 0,
-	.cls		= &openpic2_sysclass,
-};
-
-static struct sysdev_driver driver_openpic2 = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic2_suspend,
-	.resume		= &openpic2_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic2_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC2_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
-	rc = sysdev_class_register(&openpic2_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic2_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h
deleted file mode 100644
index 3a25de7cb572..000000000000
--- a/arch/ppc/syslib/open_pic_defs.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *	The Open Programmable Interrupt Controller (PIC)
- *	Register Interface Specification Revision 1.2
- *
- *	Issue Date: October 1995
- *
- *	Issued jointly by Advanced Micro Devices and Cyrix Corporation
- *
- *	AMD is a registered trademark of Advanced Micro Devices, Inc.
- *	Copyright (C) 1995, Advanced Micro Devices, Inc. and Cyrix, Inc.
- *	All Rights Reserved.
- *
- *  To receive a copy of this documentation, send an email to openpic@amd.com.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _LINUX_OPENPIC_H
-#define _LINUX_OPENPIC_H
-
-#ifdef __KERNEL__
-
-    /*
-     *  OpenPIC supports up to 2048 interrupt sources and up to 32 processors
-     */
-
-#define OPENPIC_MAX_SOURCES	2048
-#define OPENPIC_MAX_PROCESSORS	32
-#define OPENPIC_MAX_ISU		16
-
-#define OPENPIC_NUM_TIMERS	4
-#define OPENPIC_NUM_IPI		4
-#define OPENPIC_NUM_PRI		16
-#define OPENPIC_NUM_VECTORS	256
-
-
-
-    /*
-     *  OpenPIC Registers are 32 bits and aligned on 128 bit boundaries
-     */
-
-typedef struct _OpenPIC_Reg {
-    u_int Reg;					/* Little endian! */
-    char Pad[0xc];
-} OpenPIC_Reg;
-
-
-    /*
-     *  Per Processor Registers
-     */
-
-typedef struct _OpenPIC_Processor {
-    /*
-     *  Private Shadow Registers (for SLiC backwards compatibility)
-     */
-    u_int IPI0_Dispatch_Shadow;			/* Write Only */
-    char Pad1[0x4];
-    u_int IPI0_Vector_Priority_Shadow;		/* Read/Write */
-    char Pad2[0x34];
-    /*
-     *  Interprocessor Interrupt Command Ports
-     */
-    OpenPIC_Reg _IPI_Dispatch[OPENPIC_NUM_IPI];	/* Write Only */
-    /*
-     *  Current Task Priority Register
-     */
-    OpenPIC_Reg _Current_Task_Priority;		/* Read/Write */
-    char Pad3[0x10];
-    /*
-     *  Interrupt Acknowledge Register
-     */
-    OpenPIC_Reg _Interrupt_Acknowledge;		/* Read Only */
-    /*
-     *  End of Interrupt (EOI) Register
-     */
-    OpenPIC_Reg _EOI;				/* Read/Write */
-    char Pad5[0xf40];
-} OpenPIC_Processor;
-
-
-    /*
-     *  Timer Registers
-     */
-
-typedef struct _OpenPIC_Timer {
-    OpenPIC_Reg _Current_Count;			/* Read Only */
-    OpenPIC_Reg _Base_Count;			/* Read/Write */
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Timer;
-
-
-    /*
-     *  Global Registers
-     */
-
-typedef struct _OpenPIC_Global {
-    /*
-     *  Feature Reporting Registers
-     */
-    OpenPIC_Reg _Feature_Reporting0;		/* Read Only */
-    OpenPIC_Reg _Feature_Reporting1;		/* Future Expansion */
-    /*
-     *  Global Configuration Registers
-     */
-    OpenPIC_Reg _Global_Configuration0;		/* Read/Write */
-    OpenPIC_Reg _Global_Configuration1;		/* Future Expansion */
-    /*
-     *  Vendor Specific Registers
-     */
-    OpenPIC_Reg _Vendor_Specific[4];
-    /*
-     *  Vendor Identification Register
-     */
-    OpenPIC_Reg _Vendor_Identification;		/* Read Only */
-    /*
-     *  Processor Initialization Register
-     */
-    OpenPIC_Reg _Processor_Initialization;	/* Read/Write */
-    /*
-     *  IPI Vector/Priority Registers
-     */
-    OpenPIC_Reg _IPI_Vector_Priority[OPENPIC_NUM_IPI];	/* Read/Write */
-    /*
-     *  Spurious Vector Register
-     */
-    OpenPIC_Reg _Spurious_Vector;		/* Read/Write */
-    /*
-     *  Global Timer Registers
-     */
-    OpenPIC_Reg _Timer_Frequency;		/* Read/Write */
-    OpenPIC_Timer Timer[OPENPIC_NUM_TIMERS];
-    char Pad1[0xee00];
-} OpenPIC_Global;
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-typedef struct _OpenPIC_Source {
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Source, *OpenPIC_SourcePtr;
-
-
-    /*
-     *  OpenPIC Register Map
-     */
-
-struct OpenPIC {
-    char Pad1[0x1000];
-    /*
-     *  Global Registers
-     */
-    OpenPIC_Global Global;
-    /*
-     *  Interrupt Source Configuration Registers
-     */
-    OpenPIC_Source Source[OPENPIC_MAX_SOURCES];
-    /*
-     *  Per Processor Registers
-     */
-    OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
-};
-
-    /*
-     *  Current Task Priority Register
-     */
-
-#define OPENPIC_CURRENT_TASK_PRIORITY_MASK	0x0000000f
-
-    /*
-     *  Who Am I Register
-     */
-
-#define OPENPIC_WHO_AM_I_ID_MASK		0x0000001f
-
-    /*
-     *  Feature Reporting Register 0
-     */
-
-#define OPENPIC_FEATURE_LAST_SOURCE_MASK	0x07ff0000
-#define OPENPIC_FEATURE_LAST_SOURCE_SHIFT	16
-#define OPENPIC_FEATURE_LAST_PROCESSOR_MASK	0x00001f00
-#define OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT	8
-#define OPENPIC_FEATURE_VERSION_MASK		0x000000ff
-
-    /*
-     *  Global Configuration Register 0
-     */
-
-#define OPENPIC_CONFIG_RESET			0x80000000
-#define OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE	0x20000000
-#define OPENPIC_CONFIG_BASE_MASK		0x000fffff
-
-    /*
-     *  Global Configuration Register 1
-     *  This is the EICR on EPICs.
-     */
-
-#define OPENPIC_EICR_S_CLK_MASK			0x70000000
-#define OPENPIC_EICR_SIE			0x08000000
-
-    /*
-     *  Vendor Identification Register
-     */
-
-#define OPENPIC_VENDOR_ID_STEPPING_MASK		0x00ff0000
-#define OPENPIC_VENDOR_ID_STEPPING_SHIFT	16
-#define OPENPIC_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define OPENPIC_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define OPENPIC_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-
-    /*
-     *  Vector/Priority Registers
-     */
-
-#define OPENPIC_MASK				0x80000000
-#define OPENPIC_ACTIVITY			0x40000000	/* Read Only */
-#define OPENPIC_PRIORITY_MASK			0x000f0000
-#define OPENPIC_PRIORITY_SHIFT			16
-#define OPENPIC_VECTOR_MASK			0x000000ff
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-#define OPENPIC_POLARITY_POSITIVE		0x00800000
-#define OPENPIC_POLARITY_NEGATIVE		0x00000000
-#define OPENPIC_POLARITY_MASK			0x00800000
-#define OPENPIC_SENSE_LEVEL			0x00400000
-#define OPENPIC_SENSE_EDGE			0x00000000
-#define OPENPIC_SENSE_MASK			0x00400000
-
-
-    /*
-     *  Timer Registers
-     */
-
-#define OPENPIC_COUNT_MASK			0x7fffffff
-#define OPENPIC_TIMER_TOGGLE			0x80000000
-#define OPENPIC_TIMER_COUNT_INHIBIT		0x80000000
-
-
-    /*
-     *  Aliases to make life simpler
-     */
-
-/* Per Processor Registers */
-#define IPI_Dispatch(i)			_IPI_Dispatch[i].Reg
-#define Current_Task_Priority		_Current_Task_Priority.Reg
-#define Interrupt_Acknowledge		_Interrupt_Acknowledge.Reg
-#define EOI				_EOI.Reg
-
-/* Global Registers */
-#define Feature_Reporting0		_Feature_Reporting0.Reg
-#define Feature_Reporting1		_Feature_Reporting1.Reg
-#define Global_Configuration0		_Global_Configuration0.Reg
-#define Global_Configuration1		_Global_Configuration1.Reg
-#define Vendor_Specific(i)		_Vendor_Specific[i].Reg
-#define Vendor_Identification		_Vendor_Identification.Reg
-#define Processor_Initialization	_Processor_Initialization.Reg
-#define IPI_Vector_Priority(i)		_IPI_Vector_Priority[i].Reg
-#define Spurious_Vector			_Spurious_Vector.Reg
-#define Timer_Frequency			_Timer_Frequency.Reg
-
-/* Timer Registers */
-#define Current_Count			_Current_Count.Reg
-#define Base_Count			_Base_Count.Reg
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-/* Interrupt Source Registers */
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_OPENPIC_H */
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
deleted file mode 100644
index ee20a86fcc4b..000000000000
--- a/arch/ppc/syslib/pci_auto.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The CardBus support is very preliminary.  Preallocating space is
- * the way to go but will require some change in card services to
- * make it useful.  Eventually this will ensure that we can put
- * multiple CB bridges behind multiple P2P bridges.  For now, at
- * least it ensures that we place the CB bridge BAR and assigned
- * initial bus numbers.  I definitely need to do something about
- * the lack of 16-bit I/O support. -MDP
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/pci-bridge.h>
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static int pciauto_upper_iospc;
-static int pciauto_upper_memspc;
-
-void __init pciauto_setup_bars(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int bar_limit)
-{
-	int bar_response, bar_size, bar_value;
-	int bar, addr_mask;
-	int * upper_limit;
-	int found_mem64 = 0;
-
-	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
-		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				0xffffffff);
-		early_read_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				&bar_response);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
-		} else {
-			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
-			upper_limit = &pciauto_upper_memspc;
-			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
-		}
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
-
-		/* Write it out and update our limit */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				bar_value);
-
-		*upper_limit = bar_value;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					bar,
-					0x00000000);
-			found_mem64 = 0;
-		}
-
-		DBG("size=0x%x, address=0x%x\n",
-			bar_size, bar_value);
-	}
-
-}
-
-void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 1MB boundary */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT,
-			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT_UPPER16,
-			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
-
-	/* Zero upper 32 bits of prefetchable base/limit */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_BASE_UPPER32,
-			0);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_LIMIT_UPPER32,
-			0);
-}
-
-void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Round memory allocator to 1MB boundary.
-	 * If no space used, allocate minimum.
-	 */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	if (*memsave == pciauto_upper_memspc)
-		pciauto_upper_memspc -= 0x00100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Allocate 1MB for pre-fretch */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-
-	pciauto_upper_memspc -= 0x100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	if (*iosave == pciauto_upper_iospc)
-		pciauto_upper_iospc -= 0x1000;
-
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE,
-			(pciauto_upper_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE_UPPER16,
-			pciauto_upper_iospc >> 16);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x20,
-			pciauto_upper_memspc - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x30,
-			pciauto_upper_iospc - 1);
-}
-
-void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	pciauto_upper_memspc -= 0x00400000;
-	pciauto_upper_iospc -= 0x00004000;
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x1c,
-			pciauto_upper_memspc);
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x2c,
-			pciauto_upper_iospc);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
-{
-	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
-	unsigned short vid;
-	unsigned char header_type;
-
-	/*
-	 * Fetch our I/O and memory space upper boundaries used
-	 * to allocated base addresses on this hose.
-	 */
-	if (current_bus == hose->first_busno) {
-		pciauto_upper_iospc = hose->io_space.end + 1;
-		pciauto_upper_memspc = hose->mem_space.end + 1;
-	}
-
-	sub_bus = current_bus;
-
-	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
-		/* Skip our host bridge */
-		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
-			continue;
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		/* If config space read fails from this device, move on */
-		if (early_read_config_byte(hose,
-				current_bus,
-				pci_devfn,
-				PCI_HEADER_TYPE,
-				&header_type))
-			continue;
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose,
-				current_bus,
-				pci_devfn,
-				PCI_VENDOR_ID,
-				&vid);
-
-		if (vid != 0xffff) {
-			early_read_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_1);
-
-				pciauto_prescan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-				/* Place CardBus Socket/ExCA registers */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_0);
-
-				pciauto_prescan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else {
-				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-					unsigned char prg_iface;
-
-					early_read_config_byte(hose,
-							current_bus,
-							pci_devfn,
-							PCI_CLASS_PROG,
-							&prg_iface);
-					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
-						continue;
-					}
-				}
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_5);
-
-				/*
-				 * Enable some standard settings
-				 */
-				early_read_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						&cmdstat);
-				early_write_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						cmdstat |
-						PCI_COMMAND_IO |
-						PCI_COMMAND_MEMORY |
-						PCI_COMMAND_MASTER);
-				early_write_config_byte(hose,
-						current_bus,
-						pci_devfn,
-						PCI_LATENCY_TIMER,
-						0x80);
-			}
-		}
-	}
-	return sub_bus;
-}
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
deleted file mode 100644
index c3b7b8bfbcfe..000000000000
--- a/arch/ppc/syslib/ppc403_pic.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Module name: ppc403_pic.c
- *
- *    Description:
- *      Interrupt controller driver for PowerPC 403-based processors.
- */
-
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* Function Prototypes */
-
-static void ppc403_aic_enable(unsigned int irq);
-static void ppc403_aic_disable(unsigned int irq);
-static void ppc403_aic_disable_and_ack(unsigned int irq);
-
-static struct hw_interrupt_type ppc403_aic = {
-	.typename = "403GC AIC",
-	.enable = ppc403_aic_enable,
-	.disable = ppc403_aic_disable,
-	.ack = ppc403_aic_disable_and_ack,
-};
-
-int
-ppc403_pic_get_irq(void)
-{
-	int irq;
-	unsigned long bits;
-
-	/*
-	 * Only report the status of those interrupts that are actually
-	 * enabled.
-	 */
-
-	bits = mfdcr(DCRN_EXISR) & mfdcr(DCRN_EXIER);
-
-	/*
-	 * Walk through the interrupts from highest priority to lowest, and
-	 * report the first pending interrupt found.
-	 * We want PPC, not C bit numbering, so just subtract the ffs()
-	 * result from 32.
-	 */
-	irq = 32 - ffs(bits);
-
-	if (irq == NR_AIC_IRQS)
-		irq = -1;
-
-	return (irq);
-}
-
-static void
-ppc403_aic_enable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable_and_ack(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-	mtdcr(DCRN_EXISR, (1 << (31 - bit)));
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	ppc_cached_irq_mask[0] = 0;
-
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[0]);
-
-	ppc_md.get_irq = ppc403_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; i++)
-		irq_desc[i].chip = &ppc403_aic;
-}
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
deleted file mode 100644
index 9e9035693bfa..000000000000
--- a/arch/ppc/syslib/ppc405_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Authors: Frank Rowand <frank_rowand@mvista.com>,
- * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com
- * Further modifications by Armin Kuster <akuster@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#include <asm/pci-bridge.h>
-#include <asm/ibm_ocp_pci.h>
-
-
-extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
-extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
-			  unsigned char pin);
-
-void
-ppc405_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-	unsigned long max_host_addr;
-	unsigned long min_host_addr;
-	struct resource *res;
-
-	/*
-	 * openbios puts some graphics cards in the same range as the host
-	 * controller uses to map to SDRAM.  Fix it.
-	 */
-
-	min_host_addr = 0;
-	max_host_addr = PPC405_PCI_MEM_BASE - 1;
-
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		res = dev->resource + i;
-		if (!res->start)
-			continue;
-		if ((res->flags & IORESOURCE_MEM) &&
-		    (((res->start >= min_host_addr)
-		      && (res->start <= max_host_addr))
-		     || ((res->end >= min_host_addr)
-			 && (res->end <= max_host_addr))
-		     || ((res->start < min_host_addr)
-			 && (res->end > max_host_addr))
-		    )
-		    ) {
-
-			/* force pcibios_assign_resources() to assign a new address */
-			res->end -= res->start;
-			res->start = 0;
-		}
-	}
-}
-
-static int
-ppc4xx_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	/* We prevent us from seeing ourselves to avoid having
-	 * the kernel try to remap our BAR #1 and fuck up bus
-	 * master from external PCI devices
-	 */
-	return (bus == 0 && devfn == 0);
-}
-
-void
-ppc4xx_find_bridges(void)
-{
-	struct pci_controller *hose_a;
-	struct pcil0_regs *pcip;
-	unsigned int tmp_addr;
-	unsigned int tmp_size;
-	unsigned int reg_index;
-	unsigned int new_pmm_max = 0;
-	unsigned int new_pmm_min = 0;
-
-	isa_io_base = 0;
-	isa_mem_base = 0;
-	pci_dram_offset = 0;
-
-	/* Setup PCI32 hose */
-	hose_a = pcibios_alloc_controller();
-	if (!hose_a)
-		return;
-	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
-			   PPC405_PCI_CONFIG_DATA);
-
-	pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
-	if (pcip != NULL) {
-
-#if defined(CONFIG_BIOS_FIXUP)
-		bios_fixup(hose_a, pcip);
-#endif
-		new_pmm_min = 0xffffffff;
-		for (reg_index = 0; reg_index < 3; reg_index++) {
-			tmp_size = in_le32(&pcip->pmm[reg_index].ma);	// mask & attrs
-			/* test the enable bit */
-			if ((tmp_size & 0x1) == 0)
-				continue;
-			tmp_addr = in_le32(&pcip->pmm[reg_index].pcila);	// PCI addr
-			if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
-				printk(KERN_DEBUG
-				       "Disabling mapping to PCI mem addr 0x%8.8x\n",
-				       tmp_addr);
-				out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1);	// *_PMMOMA
-				continue;
-			}
-			tmp_addr = in_le32(&pcip->pmm[reg_index].la);	// *_PMMOLA
-			if (tmp_addr < new_pmm_min)
-				new_pmm_min = tmp_addr;
-			tmp_addr = tmp_addr +
-				(0xffffffff - (tmp_size & 0xffffc000));
-			if (tmp_addr > PPC405_PCI_UPPER_MEM) {
-				new_pmm_max = tmp_addr;	// PPC405_PCI_UPPER_MEM
-			} else {
-				new_pmm_max = PPC405_PCI_UPPER_MEM;
-			}
-
-		}		// for
-
-		iounmap(pcip);
-	}
-
-	hose_a->first_busno = 0;
-	hose_a->last_busno = 0xff;
-	hose_a->pci_mem_offset = 0;
-
-	/* Setup bridge memory/IO ranges & resources
-	 * TODO: Handle firmware setting up a legacy ISA mem base
-	 */
-	hose_a->io_space.start = PPC405_PCI_LOWER_IO;
-	hose_a->io_space.end = PPC405_PCI_UPPER_IO;
-	hose_a->mem_space.start = new_pmm_min;
-	hose_a->mem_space.end = new_pmm_max;
-	hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
-	hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
-	hose_a->io_resource.start = 0;
-	hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
-	hose_a->io_resource.flags = IORESOURCE_IO;
-	hose_a->io_resource.name = "PCI I/O";
-	hose_a->mem_resources[0].start = new_pmm_min;
-	hose_a->mem_resources[0].end = new_pmm_max;
-	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
-	hose_a->mem_resources[0].name = "PCI Memory";
-	isa_io_base = (int) hose_a->io_base_virt;
-	isa_mem_base = 0;	/*     ISA not implemented */
-	ISA_DMA_THRESHOLD = 0x00ffffff;	/* ??? ISA not implemented */
-
-	/* Scan busses & initial setup by pci_auto */
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-	hose_a->last_busno = 0;
-
-	/* Setup ppc_md */
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pci_exclude_device = ppc4xx_exclude_device;
-	ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc405_map_irq;
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
deleted file mode 100644
index dd5d4b958c31..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-
-#include "ppc440spe_pcie.h"
-
-static int
-pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8(hose->cfg_data + offset);
-		break;
-	case 2:
-		*val = in_le16(hose->cfg_data + offset);
-		break;
-	default:
-		*val = in_le32(hose->cfg_data + offset);
-		break;
-	}
-
-	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	switch (len) {
-	case 1:
-		out_8(hose->cfg_data + offset, val);
-		break;
-	case 2:
-		out_le16(hose->cfg_data + offset, val);
-		break;
-	default:
-		out_le32(hose->cfg_data + offset, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pcie_pci_ops =
-{
-	.read  = pcie_read_config,
-	.write = pcie_write_config
-};
-
-enum {
-	PTYPE_ENDPOINT		= 0x0,
-	PTYPE_LEGACY_ENDPOINT	= 0x1,
-	PTYPE_ROOT_PORT		= 0x4,
-
-	LNKW_X1			= 0x1,
-	LNKW_X4			= 0x4,
-	LNKW_X8			= 0x8
-};
-
-static void check_error(void)
-{
-	u32 valPE0, valPE1, valPE2;
-
-	/* SDR0_PEGPLLLCT1 reset */
-	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
-		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
-	}
-
-	valPE0 = SDR_READ(PESDR0_RCSSET);
-	valPE1 = SDR_READ(PESDR1_RCSSET);
-	valPE2 = SDR_READ(PESDR2_RCSSET);
-
-	/* SDR0_PExRCSSET rstgu */
-	if ( !(valPE0 & 0x01000000) ||
-	     !(valPE1 & 0x01000000) ||
-	     !(valPE2 & 0x01000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if ( !(valPE0 & 0x00010000) ||
-	     !(valPE1 & 0x00010000) ||
-	     !(valPE2 & 0x00010000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ( (valPE0 & 0x00001000) ||
-	     (valPE1 & 0x00001000) ||
-	     (valPE2 & 0x00001000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ( (valPE0 & 0x10000000) ||
-	     (valPE1 & 0x10000000) ||
-	     (valPE2 & 0x10000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ( (valPE0 & 0x00100000) ||
-	     (valPE1 & 0x00100000) ||
-	     (valPE2 & 0x00100000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
-	}
-
-	/* SDR0_PExRCSSET shutdown */
-	if ( (valPE0 & 0x00000100) ||
-	     (valPE1 & 0x00000100) ||
-	     (valPE2 & 0x00000100)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
-	}
-}
-
-/*
- * Initialize PCI Express core as described in User Manual section 27.12.1
- */
-int ppc440spe_init_pcie(void)
-{
-	/* Set PLL clock receiver to LVPECL */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
-	check_error();
-
-	printk(KERN_INFO "PCIE initialization OK\n");
-
-	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
-		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
-		       SDR_READ(PESDR0_PLLLCT2));
-
-	/* De-assert reset of PCIe PLL, wait for lock */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
-	udelay(3);
-
-	return 0;
-}
-
-int ppc440spe_init_pcie_rootport(int port)
-{
-	static int core_init;
-	void __iomem *utl_base;
-	u32 val = 0;
-	int i;
-
-	if (!core_init) {
-		++core_init;
-		i = ppc440spe_init_pcie();
-		if (i)
-			return i;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a root port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-
-		SDR_WRITE(PESDR0_RCSSET,
-			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR1_RCSSET,
-			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR2_RCSSET,
-			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
-
-	mdelay(1000);
-
-	switch (port) {
-	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
-	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
-	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
-	}
-
-	if (!(val & (1 << 20)))
-		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
-	else
-		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
-
-	switch (port) {
-	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
-	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
-	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
-	}
-
-	/*
-	 * Map UTL registers at 0xc_1000_0n00
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
-	}
-
-	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
-	out_be32(utl_base + PEUTL_INTR,    0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
-	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
-	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
-
-	iounmap(utl_base);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	switch (port) {
-	case 0:
-		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
-	}
-
-#if 0
-	/* Dump all config regs */
-	for (i = 0x300; i <= 0x320; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x340; i <= 0x353; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x370; i <= 0x383; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3a0; i <= 0x3a2; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3c0; i <= 0x3c3; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-#endif
-
-	mdelay(100);
-
-	return 0;
-}
-
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
-{
-	void __iomem *mbase;
-
-	/*
-	 * Map 16MB, which is enough for 4 bits of bus #
-	 */
-	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
-				   1 << 24);
-	hose->ops = &pcie_pci_ops;
-
-	/*
-	 * Set bus numbers on our root port
-	 */
-	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
-	out_8(mbase + PCI_PRIMARY_BUS, 0);
-	out_8(mbase + PCI_SECONDARY_BUS, 0);
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0);
-	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-
-		break;
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	}
-
-	/* Set up 16GB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-	out_le32(mbase + PECFG_PIM0LAL, 0);
-	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16(mbase + PCI_COMMAND,
-		 in_le16(mbase + PCI_COMMAND) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	iounmap(mbase);
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
deleted file mode 100644
index 55b765ad3272..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
-#define __PPC_SYSLIB_PPC440SPE_PCIE_H
-
-#define DCRN_SDR0_CFGADDR	0x00e
-#define DCRN_SDR0_CFGDATA	0x00f
-
-#define DCRN_PCIE0_BASE		0x100
-#define DCRN_PCIE1_BASE		0x120
-#define DCRN_PCIE2_BASE		0x140
-#define PCIE0			DCRN_PCIE0_BASE
-#define PCIE1			DCRN_PCIE1_BASE
-#define PCIE2			DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
-#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
-#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
-#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1		0x03a0
-#define PESDR0_PLLLCT2		0x03a1
-#define PESDR0_PLLLCT3		0x03a2
-
-#define PESDR0_UTLSET1		0x0300
-#define PESDR0_UTLSET2		0x0301
-#define PESDR0_DLPSET		0x0302
-#define PESDR0_LOOP		0x0303
-#define PESDR0_RCSSET		0x0304
-#define PESDR0_RCSSTS		0x0305
-#define PESDR0_HSSL0SET1	0x0306
-#define PESDR0_HSSL0SET2	0x0307
-#define PESDR0_HSSL0STS		0x0308
-#define PESDR0_HSSL1SET1	0x0309
-#define PESDR0_HSSL1SET2	0x030a
-#define PESDR0_HSSL1STS		0x030b
-#define PESDR0_HSSL2SET1	0x030c
-#define PESDR0_HSSL2SET2	0x030d
-#define PESDR0_HSSL2STS		0x030e
-#define PESDR0_HSSL3SET1	0x030f
-#define PESDR0_HSSL3SET2	0x0310
-#define PESDR0_HSSL3STS		0x0311
-#define PESDR0_HSSL4SET1	0x0312
-#define PESDR0_HSSL4SET2	0x0313
-#define PESDR0_HSSL4STS		0x0314
-#define PESDR0_HSSL5SET1	0x0315
-#define PESDR0_HSSL5SET2	0x0316
-#define PESDR0_HSSL5STS		0x0317
-#define PESDR0_HSSL6SET1	0x0318
-#define PESDR0_HSSL6SET2	0x0319
-#define PESDR0_HSSL6STS		0x031a
-#define PESDR0_HSSL7SET1	0x031b
-#define PESDR0_HSSL7SET2	0x031c
-#define PESDR0_HSSL7STS		0x031d
-#define PESDR0_HSSCTLSET	0x031e
-#define PESDR0_LANE_ABCD	0x031f
-#define PESDR0_LANE_EFGH	0x0320
-
-#define PESDR1_UTLSET1		0x0340
-#define PESDR1_UTLSET2		0x0341
-#define PESDR1_DLPSET		0x0342
-#define PESDR1_LOOP		0x0343
-#define PESDR1_RCSSET		0x0344
-#define PESDR1_RCSSTS		0x0345
-#define PESDR1_HSSL0SET1	0x0346
-#define PESDR1_HSSL0SET2	0x0347
-#define PESDR1_HSSL0STS		0x0348
-#define PESDR1_HSSL1SET1	0x0349
-#define PESDR1_HSSL1SET2	0x034a
-#define PESDR1_HSSL1STS		0x034b
-#define PESDR1_HSSL2SET1	0x034c
-#define PESDR1_HSSL2SET2	0x034d
-#define PESDR1_HSSL2STS		0x034e
-#define PESDR1_HSSL3SET1	0x034f
-#define PESDR1_HSSL3SET2	0x0350
-#define PESDR1_HSSL3STS		0x0351
-#define PESDR1_HSSCTLSET	0x0352
-#define PESDR1_LANE_ABCD	0x0353
-
-#define PESDR2_UTLSET1		0x0370
-#define PESDR2_UTLSET2		0x0371
-#define PESDR2_DLPSET		0x0372
-#define PESDR2_LOOP		0x0373
-#define PESDR2_RCSSET		0x0374
-#define PESDR2_RCSSTS		0x0375
-#define PESDR2_HSSL0SET1	0x0376
-#define PESDR2_HSSL0SET2	0x0377
-#define PESDR2_HSSL0STS		0x0378
-#define PESDR2_HSSL1SET1	0x0379
-#define PESDR2_HSSL1SET2	0x037a
-#define PESDR2_HSSL1STS		0x037b
-#define PESDR2_HSSL2SET1	0x037c
-#define PESDR2_HSSL2SET2	0x037d
-#define PESDR2_HSSL2STS		0x037e
-#define PESDR2_HSSL3SET1	0x037f
-#define PESDR2_HSSL3SET2	0x0380
-#define PESDR2_HSSL3STS		0x0381
-#define PESDR2_HSSCTLSET	0x0382
-#define PESDR2_LANE_ABCD	0x0383
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBBSZ		0x20
-#define PEUTL_OPDBSZ		0x68
-#define PEUTL_IPHBSZ		0x70
-#define PEUTL_IPDBSZ		0x78
-#define PEUTL_OUTTR		0x90
-#define PEUTL_INTR		0x98
-#define PEUTL_PCTL		0xa0
-#define PEUTL_RCIRQEN		0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA		0x210
-#define PECFG_BAR0HMPA		0x214
-#define PECFG_PIMEN		0x33c
-#define PECFG_PIM0LAL		0x340
-#define PECFG_PIM0LAH		0x344
-#define PECFG_POM0LAL		0x380
-#define PECFG_POM0LAH		0x384
-
-int ppc440spe_init_pcie(void);
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
-#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
deleted file mode 100644
index bd301868996b..000000000000
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * IBM PPC4xx DMA engine core library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/ppc4xx_dma.h>
-
-ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
-
-int
-ppc4xx_get_dma_status(void)
-{
-	return (mfdcr(DCRN_DMASR));
-}
-
-void
-ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_src_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
-#else
-	mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
-#endif
-}
-
-void
-ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dst_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
-#else
-	mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
-#endif
-}
-
-void
-ppc4xx_enable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
-				       DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
-				       DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
-				       DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
-
-	if (p_dma_ch->in_use) {
-		printk("enable_dma: channel %d in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("enable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	if (p_dma_ch->mode == DMA_MODE_READ) {
-		/* peripheral to memory */
-		ppc4xx_set_src_addr(dmanr, 0);
-		ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
-	} else if (p_dma_ch->mode == DMA_MODE_WRITE) {
-		/* memory to peripheral */
-		ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
-		ppc4xx_set_dst_addr(dmanr, 0);
-	}
-
-	/* for other xfer modes, the addresses are already set */
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	control &= ~(DMA_TM_MASK | DMA_TD);	/* clear all mode bits */
-	if (p_dma_ch->mode == DMA_MODE_MM) {
-		/* software initiated memory to memory */
-		control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-	}
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/*
-	 * Clear the CS, TS, RI bits for the channel from DMASR.  This
-	 * has been observed to happen correctly only after the mode and
-	 * ETD/DCE bits in DMACRx are set above.  Must do this before
-	 * enabling the channel.
-	 */
-
-	mtdcr(DCRN_DMASR, status_bits[dmanr]);
-
-	/*
-	 * For device-paced transfers, Terminal Count Enable apparently
-	 * must be on, and this must be turned on after the mode, etc.
-	 * bits are cleared above (at least on Redwood-6).
-	 */
-
-	if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
-	    (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
-		control |= DMA_TCE_ENABLE;
-
-	/*
-	 * Now enable the channel.
-	 */
-
-	control |= (p_dma_ch->mode | DMA_CE_ENABLE);
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 1;
-}
-
-void
-ppc4xx_disable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (!p_dma_ch->in_use) {
-		printk("disable_dma: channel %d not in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("disable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CE_ENABLE;
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 0;
-}
-
-/*
- * Sets the dma mode for single DMA transfers only.
- * For scatter/gather transfers, the mode is passed to the
- * alloc_dma_handle() function as one of the parameters.
- *
- * The mode is simply saved and used later.  This allows
- * the driver to call set_dma_mode() and set_dma_addr() in
- * any order.
- *
- * Valid mode values are:
- *
- * DMA_MODE_READ          peripheral to memory
- * DMA_MODE_WRITE         memory to peripheral
- * DMA_MODE_MM            memory to memory
- * DMA_MODE_MM_DEVATSRC   device-paced memory to memory, device at src
- * DMA_MODE_MM_DEVATDST   device-paced memory to memory, device at dst
- */
-int
-ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dma_mode: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->mode = mode;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the DMA Count register. Note that 'count' is in bytes.
- * However, the DMA Count register counts the number of "transfers",
- * where each transfer is equal to the bus width.  Thus, count
- * MUST be a multiple of the bus width.
- */
-void
-ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (count & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (count & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (count & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("set_dma_count: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk
-			    ("Warning: set_dma_count count 0x%x bus width %d\n",
-			     count, p_dma_ch->pwidth);
-	}
-#endif
-
-	count = count >> p_dma_ch->shift;
-
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
-}
-
-/*
- *   Returns the number of bytes left to be transferred.
- *   After a DMA transfer, this should return zero.
- *   Reading this while a DMA transfer is still in progress will return
- *   unpredictable results.
- */
-int
-ppc4xx_get_dma_residue(unsigned int dmanr)
-{
-	unsigned int count;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
-
-	return (count << p_dma_ch->shift);
-}
-
-/*
- * Sets the DMA address for a memory to peripheral or peripheral
- * to memory transfer.  The address is just saved in the channel
- * structure for now and used later in enable_dma().
- */
-void
-ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if ((unsigned) addr & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if ((unsigned) addr & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if ((unsigned) addr & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
-			       addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	/* save dma address and program it later after we know the xfer mode */
-	p_dma_ch->addr = addr;
-}
-
-/*
- * Sets both DMA addresses for a memory to memory transfer.
- * For memory to peripheral or peripheral to memory transfers
- * the function set_dma_addr() should be used instead.
- */
-void
-ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
-		     phys_addr_t dst_dma_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-			case PW_8:
-				break;
-			case PW_16:
-				if (((unsigned) src_dma_addr & 0x1) ||
-						((unsigned) dst_dma_addr & 0x1)
-				   )
-					error = 1;
-				break;
-			case PW_32:
-				if (((unsigned) src_dma_addr & 0x3) ||
-						((unsigned) dst_dma_addr & 0x3)
-				   )
-					error = 1;
-				break;
-			case PW_64:
-				if (((unsigned) src_dma_addr & 0x7) ||
-						((unsigned) dst_dma_addr & 0x7)
-				   )
-					error = 1;
-				break;
-			default:
-				printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
-						p_dma_ch->pwidth);
-				return;
-		}
-		if (error)
-			printk
-				("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
-				 src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	ppc4xx_set_src_addr(dmanr, src_dma_addr);
-	ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
-}
-
-/*
- * Enables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be enabled, if
- * they were previously disabled.
- */
-int
-ppc4xx_enable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 1;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Disables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be disabled, if
- * they were previously enabled.
- */
-int
-ppc4xx_disable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 0;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Configures a DMA channel, including the peripheral bus width, if a
- * peripheral is attached to the channel, the polarity of the DMAReq and
- * DMAAck signals, etc.  This information should really be setup by the boot
- * code, since most likely the configuration won't change dynamically.
- * If the kernel has to call this function, it's recommended that it's
- * called from platform specific init code.  The driver should not need to
- * call this function.
- */
-int
-ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
-{
-	unsigned int polarity;
-	uint32_t control = 0;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	DMA_MODE_READ = (unsigned long) DMA_TD;	/* Peripheral to Memory */
-	DMA_MODE_WRITE = 0;	/* Memory to Peripheral */
-
-	if (!p_init) {
-		printk("ppc4xx_init_dma_channel: NULL p_init\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	/* Setup the control register based on the values passed to
-	 * us in p_init.  Then, over-write the control register with this
-	 * new value.
-	 */
-	control |= SET_DMA_CONTROL;
-
-	/* clear all polarity signals and then "or" in new signal levels */
-	polarity &= ~GET_DMA_POLARITY(dmanr);
-	polarity |= p_init->polarity;
-#if DCRN_POL > 0
-	mtdcr(DCRN_POL, polarity);
-#endif
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/* save these values in our dma channel structure */
-	memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
-
-	/*
-	 * The peripheral width values written in the control register are:
-	 *   PW_8                 0
-	 *   PW_16                1
-	 *   PW_32                2
-	 *   PW_64                3
-	 *
-	 *   Since the DMA count register takes the number of "transfers",
-	 *   we need to divide the count sent to us in certain
-	 *   functions by the appropriate number.  It so happens that our
-	 *   right shift value is equal to the peripheral width value.
-	 */
-	p_dma_ch->shift = p_init->pwidth;
-
-	/*
-	 * Save the control word for easy access.
-	 */
-	p_dma_ch->control = control;
-
-	mtdcr(DCRN_DMASR, 0xffffffff);	/* clear status register */
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * This function returns the channel configuration.
- */
-int
-ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
-{
-	unsigned int polarity;
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	p_dma_ch->cp = GET_DMA_PRIORITY(control);
-	p_dma_ch->pwidth = GET_DMA_PW(control);
-	p_dma_ch->psc = GET_DMA_PSC(control);
-	p_dma_ch->pwc = GET_DMA_PWC(control);
-	p_dma_ch->phc = GET_DMA_PHC(control);
-	p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
-	p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
-	p_dma_ch->shift = GET_DMA_PW(control);
-
-#ifdef CONFIG_PPC4xx_EDMA
-	p_dma_ch->pf = GET_DMA_PREFETCH(control);
-#else
-	p_dma_ch->ch_enable = GET_DMA_CH(control);
-	p_dma_ch->ece_enable = GET_DMA_ECE(control);
-	p_dma_ch->tcd_disable = GET_DMA_TCD(control);
-#endif
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the priority for the DMA channel dmanr.
- * Since this is setup by the hardware init function, this function
- * can be used to dynamically change the priority of a channel.
- *
- * Acceptable priorities:
- *
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- *
- */
-int
-ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if ((priority != PRIORITY_LOW) &&
-	    (priority != PRIORITY_MID_LOW) &&
-	    (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
-		printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= SET_DMA_PRIORITY(priority);
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Returns the width of the peripheral attached to this channel. This assumes
- * that someone who knows the hardware configuration, boot code or some other
- * init code, already set the width.
- *
- * The return value is one of:
- *   PW_8
- *   PW_16
- *   PW_32
- *   PW_64
- *
- *   The function returns 0 on error.
- */
-unsigned int
-ppc4xx_get_peripheral_width(unsigned int dmanr)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	return (GET_DMA_PW(control));
-}
-
-/*
- * Clears the channel status bits
- */
-int
-ppc4xx_clr_dma_status(unsigned int dmanr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
-	return DMA_STATUS_GOOD;
-}
-
-#ifdef CONFIG_PPC4xx_EDMA
-/*
- * Enables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_enable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-        ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Disables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_disable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Sets the burst size (number of peripheral widths) for the channel
- * (BSIZ bits in the control/count register))
- * must be one of:
- *    DMA_CTC_BSIZ_2
- *    DMA_CTC_BSIZ_4
- *    DMA_CTC_BSIZ_8
- *    DMA_CTC_BSIZ_16
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
-	ctc |= (bsize & DMA_CTC_BSIZ_MSK);
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
-#endif /* CONFIG_PPC4xx_EDMA */
-
-EXPORT_SYMBOL(ppc4xx_init_dma_channel);
-EXPORT_SYMBOL(ppc4xx_get_channel_config);
-EXPORT_SYMBOL(ppc4xx_set_channel_priority);
-EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
-EXPORT_SYMBOL(dma_channels);
-EXPORT_SYMBOL(ppc4xx_set_src_addr);
-EXPORT_SYMBOL(ppc4xx_set_dst_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
-EXPORT_SYMBOL(ppc4xx_enable_dma);
-EXPORT_SYMBOL(ppc4xx_disable_dma);
-EXPORT_SYMBOL(ppc4xx_set_dma_mode);
-EXPORT_SYMBOL(ppc4xx_set_dma_count);
-EXPORT_SYMBOL(ppc4xx_get_dma_residue);
-EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_get_dma_status);
-EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
deleted file mode 100644
index ee0da4b4b993..000000000000
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004, 2005 Zultys Technologies
- *
- * Based on original code by
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *    Armin Custer <akuster@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
-*/
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* See comment in include/arch-ppc/ppc4xx_pic.h
- * for more info about these two variables
- */
-extern struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[NR_UICS]
-    __attribute__ ((weak));
-extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
-
-#define IRQ_MASK_UIC0(irq)		(1 << (31 - (irq)))
-#define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
-#define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
-
-#define UIC_HANDLERS(n)							\
-static void ppc4xx_uic##n##_enable(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (irq_desc[irq].status & IRQ_LEVEL)				\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-	ppc_cached_irq_mask[n] |= mask;					\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-}									\
-									\
-static void ppc4xx_uic##n##_disable(unsigned int irq)			\
-{									\
-	ppc_cached_irq_mask[n] &= ~IRQ_MASK_UIC##n(irq);		\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_ack(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	ppc_cached_irq_mask[n] &= ~mask;				\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	mtdcr(DCRN_UIC_SR(UIC##n), mask);				\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_end(unsigned int irq)			\
-{									\
-	unsigned int status = irq_desc[irq].status;			\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (status & IRQ_LEVEL) {					\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-		ACK_UIC##n##_PARENT					\
-	}								\
-	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {		\
-		ppc_cached_irq_mask[n] |= mask;				\
-		mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);	\
-	}								\
-}
-
-#define DECLARE_UIC(n)							\
-{									\
-	.typename 	= "UIC"#n,					\
-	.enable 	= ppc4xx_uic##n##_enable,			\
-	.disable 	= ppc4xx_uic##n##_disable,			\
-	.ack 		= ppc4xx_uic##n##_ack,				\
-	.end 		= ppc4xx_uic##n##_end,				\
-}									\
-
-#if NR_UICS == 4
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
-#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-UIC_HANDLERS(3);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uic0 & UIC0_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else if (uic0 & UIC0_UIC3NC)
-		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupts in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 3
-#define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uicb = mfdcr(DCRN_UIC_MSR(UICB));
-	if (uicb & UICB_UIC0NC)
-		return 32 - ffs(mfdcr(DCRN_UIC_MSR(UIC0)));
-	else if (uicb & UICB_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uicb & UICB_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else
-		return -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-#if defined(CONFIG_440GX)
-	/* Disable 440GP compatibility mode if it was enabled in firmware */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM);
-#endif
-	/* Configure Base UIC */
-	mtdcr(DCRN_UIC_CR(UICB), 0);
-	mtdcr(DCRN_UIC_TR(UICB), 0);
-	mtdcr(DCRN_UIC_PR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_SR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_ER(UICB), UICB_UIC0NC | UICB_UIC1NC | UICB_UIC2NC);
-}
-
-#elif NR_UICS == 2
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupt in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 1
-#define ACK_UIC0_PARENT
-UIC_HANDLERS(0);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static inline void ppc4xx_pic_impl_init(void)
-{
-}
-#endif
-
-static struct ppc4xx_uic_impl {
-	struct hw_interrupt_type decl;
-	int base;			/* Base DCR number */
-} __uic[] = {
-	{ .decl = DECLARE_UIC(0), .base = UIC0 },
-#if NR_UICS > 1
-	{ .decl = DECLARE_UIC(1), .base = UIC1 },
-#if NR_UICS > 2
-	{ .decl = DECLARE_UIC(2), .base = UIC2 },
-#if NR_UICS > 3
-	{ .decl = DECLARE_UIC(3), .base = UIC3 },
-#endif
-#endif
-#endif
-};
-
-static inline int is_level_sensitive(int irq)
-{
-	u32 tr = mfdcr(DCRN_UIC_TR(__uic[irq >> 5].base));
-	return (tr & IRQ_MASK_UICx(irq)) == 0;
-}
-
-void __init ppc4xx_pic_init(void)
-{
-	int i;
-	unsigned char *eirqs = ppc4xx_uic_ext_irq_cfg;
-
-	for (i = 0; i < NR_UICS; ++i) {
-		int base = __uic[i].base;
-
-		/* Disable everything by default */
-		ppc_cached_irq_mask[i] = 0;
-		mtdcr(DCRN_UIC_ER(base), 0);
-
-		/* We don't use critical interrupts */
-		mtdcr(DCRN_UIC_CR(base), 0);
-
-		/* Configure polarity and triggering */
-		if (ppc4xx_core_uic_cfg) {
-			struct ppc4xx_uic_settings *p = ppc4xx_core_uic_cfg + i;
-			u32 mask = p->ext_irq_mask;
-			u32 pr = mfdcr(DCRN_UIC_PR(base)) & mask;
-			u32 tr = mfdcr(DCRN_UIC_TR(base)) & mask;
-
-			/* "Fixed" interrupts (on-chip devices) */
-			pr |= p->polarity & ~mask;
-			tr |= p->triggering & ~mask;
-
-			/* Merge external IRQs settings if board port
-			 * provided them
-			 */
-			if (eirqs && mask) {
-				pr &= ~mask;
-				tr &= ~mask;
-				while (mask) {
-					/* Extract current external IRQ mask */
-					u32 eirq_mask = 1 << __ilog2(mask);
-
-					if (!(*eirqs & IRQ_SENSE_LEVEL))
-						tr |= eirq_mask;
-
-					if (*eirqs & IRQ_POLARITY_POSITIVE)
-						pr |= eirq_mask;
-
-					mask &= ~eirq_mask;
-					++eirqs;
-				}
-			}
-			mtdcr(DCRN_UIC_PR(base), pr);
-			mtdcr(DCRN_UIC_TR(base), tr);
-		}
-
-		/* ACK any pending interrupts to prevent false
-		 * triggering after first enable
-		 */
-		mtdcr(DCRN_UIC_SR(base), 0xffffffff);
-	}
-
-	/* Perform optional implementation specific setup
-	 * (e.g. enable cascade interrupts for multi-UIC configurations)
-	 */
-	ppc4xx_pic_impl_init();
-
-	/* Attach low-level handlers */
-	for (i = 0; i < (NR_UICS << 5); ++i) {
-		irq_desc[i].chip = &__uic[i >> 5].decl;
-		if (is_level_sensitive(i))
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	ppc_md.get_irq = ppc4xx_pic_get_irq;
-}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
deleted file mode 100644
index 353d746b47e1..000000000000
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *
- *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Completed implementation.
- *      Author: MontaVista Software, Inc.  <source@mvista.com>
- *              Frank Rowand <frank_rowand@mvista.com>
- *              Debbie Chu   <debbie_chu@mvista.com>
- *	Further modifications by Armin Kuster
- *
- *    Module name: ppc4xx_setup.c
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/initrd.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/kgdb.h>
-#include <asm/ibm4xx.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-
-#include <syslib/gen550.h>
-
-/* Function Prototypes */
-extern void abort(void);
-extern void ppc4xx_find_bridges(void);
-
-/* Global Variables */
-bd_t __res;
-
-void __init
-ppc4xx_setup_arch(void)
-{
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-
-	/* Setup PCI host bridges */
-#ifdef CONFIG_PCI
-	ppc4xx_find_bridges();
-#endif
-}
-
-/*
- *   This routine pretty-prints the platform's internal CPU clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-
-static int
-ppc4xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
-
-	return 0;
-}
-
-/*
- *   This routine pretty-prints the platform's internal bus clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-static int
-ppc4xx_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bip = &__res;
-
-	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
-	seq_printf(m, "plb bus clock\t: %ldMHz\n",
-		   (long) bip->bi_busfreq / 1000000);
-#ifdef CONFIG_PCI
-	seq_printf(m, "pci bus clock\t: %dMHz\n",
-		   bip->bi_pci_busfreq / 1000000);
-#endif
-
-	return 0;
-}
-
-/*
- * Return the virtual address representing the top of physical RAM.
- */
-static unsigned long __init
-ppc4xx_find_end_of_memory(void)
-{
-	return ((unsigned long) __res.bi_memsize);
-}
-
-void __init
-ppc4xx_map_io(void)
-{
-	io_block_mapping(PPC4xx_ONB_IO_VADDR,
-			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
-#ifdef CONFIG_PCI
-	io_block_mapping(PPC4xx_PCI_IO_VADDR,
-			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
-			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
-			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-ppc4xx_init_IRQ(void)
-{
-	ppc4xx_pic_init();
-}
-
-static void
-ppc4xx_restart(char *cmd)
-{
-	printk("%s\n", cmd);
-	abort();
-}
-
-static void
-ppc4xx_power_off(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-static void
-ppc4xx_halt(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-/*
- * This routine retrieves the internal processor frequency from the board
- * information structure, sets up the kernel timer decrementer based on
- * that value, enables the 4xx programmable interval timer (PIT) and sets
- * it up for auto-reload.
- */
-static void __init
-ppc4xx_calibrate_decr(void)
-{
-	unsigned int freq;
-	bd_t *bip = &__res;
-
-#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
-	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
-	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
-#endif
-	freq = bip->bi_tbfreq;
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero.
-	   ** At 200 Mhz, time base will rollover in ~2925 years.
-	 */
-
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
-	/* Set the PIT reload value and just let it run. */
-	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
-}
-
-TODC_ALLOC();
-
-/*
- * Input(s):
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	    unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	/* Initialize machine-dependent vectors */
-
-	ppc_md.setup_arch = ppc4xx_setup_arch;
-	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
-	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
-	ppc_md.init_IRQ = ppc4xx_init_IRQ;
-
-	ppc_md.restart = ppc4xx_restart;
-	ppc_md.power_off = ppc4xx_power_off;
-	ppc_md.halt = ppc4xx_halt;
-
-	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc4xx_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(DCRN_PLB0_BEAR)
-	printk("PLB0: BEAR= 0x%08x ACR=   0x%08x BESR=  0x%08x\n",
-	    mfdcr(DCRN_PLB0_BEAR), mfdcr(DCRN_PLB0_ACR),
-	    mfdcr(DCRN_PLB0_BESR));
-#endif
-#if defined(DCRN_POB0_BEAR)
-	printk("PLB0 to OPB: BEAR= 0x%08x BESR0= 0x%08x BESR1= 0x%08x\n",
-	    mfdcr(DCRN_POB0_BEAR), mfdcr(DCRN_POB0_BESR0),
-	    mfdcr(DCRN_POB0_BESR1));
-#endif
-
-}
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
deleted file mode 100644
index c4b369b50f9c..000000000000
--- a/arch/ppc/syslib/ppc4xx_sgdma.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * IBM PPC4xx DMA engine scatter/gather library
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_dma.h>
-
-void
-ppc4xx_set_sg_addr(int dmanr, phys_addr_t sg_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_sg_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_ASGH0 + (dmanr * 0x8), (u32)(sg_addr >> 32));
-#endif
-	mtdcr(DCRN_ASG0 + (dmanr * 0x8), (u32)sg_addr);
-}
-
-/*
- *   Add a new sgl descriptor to the end of a scatter/gather list
- *   which was created by alloc_dma_handle().
- *
- *   For a memory to memory transfer, both dma addresses must be
- *   valid. For a peripheral to memory transfer, one of the addresses
- *   must be set to NULL, depending on the direction of the transfer:
- *   memory to peripheral: set dst_addr to NULL,
- *   peripheral to memory: set src_addr to NULL.
- */
-int
-ppc4xx_add_dma_sgl(sgl_handle_t handle, phys_addr_t src_addr, phys_addr_t dst_addr,
-		   unsigned int count)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-
-	if (!handle) {
-		printk("ppc4xx_add_dma_sgl: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	}
-
-	if (psgl->dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_add_dma_sgl: bad channel: %d\n", psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		unsigned int aligned =
-		    (unsigned) src_addr | (unsigned) dst_addr | count;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (aligned & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (aligned & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (aligned & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_add_dma_sgl: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return DMA_STATUS_GENERAL_ERROR;
-		}
-		if (error)
-			printk
-			    ("Alignment warning: ppc4xx_add_dma_sgl src 0x%x dst 0x%x count 0x%x bus width var %d\n",
-			     src_addr, dst_addr, count, p_dma_ch->pwidth);
-
-	}
-#endif
-
-	if ((unsigned) (psgl->ptail + 1) >= ((unsigned) psgl + SGL_LIST_SIZE)) {
-		printk("sgl handle out of memory \n");
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	if (!psgl->ptail) {
-		psgl->phead = (ppc_sgl_t *)
-		    ((unsigned) psgl + sizeof (sgl_list_info_t));
-		psgl->phead_dma = psgl->dma_addr + sizeof(sgl_list_info_t);
-		psgl->ptail = psgl->phead;
-		psgl->ptail_dma = psgl->phead_dma;
-	} else {
-		if(p_dma_ch->int_on_final_sg) {
-			/* mask out all dma interrupts, except error, on tail
-			before adding new tail. */
-			psgl->ptail->control_count &=
-				~(SG_TCI_ENABLE | SG_ETI_ENABLE);
-		}
-		psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
-		psgl->ptail++;
-		psgl->ptail_dma += sizeof(ppc_sgl_t);
-	}
-
-	psgl->ptail->control = psgl->control;
-	psgl->ptail->src_addr = src_addr;
-	psgl->ptail->dst_addr = dst_addr;
-	psgl->ptail->control_count = (count >> p_dma_ch->shift) |
-	    psgl->sgl_control;
-	psgl->ptail->next = (uint32_t) NULL;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Enable (start) the DMA described by the sgl handle.
- */
-void
-ppc4xx_enable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	} else if (!psgl->phead) {
-		printk("ppc4xx_enable_dma_sgl: sg list empty\n");
-		return;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-	psgl->ptail->control_count &= ~SG_LINK;	/* make this the last dscrptr */
-	sg_command = mfdcr(DCRN_ASGC);
-
-	ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
-
-	sg_command |= SSG_ENABLE(psgl->dmanr);
-
-	mtdcr(DCRN_ASGC, sg_command);	/* start transfer */
-}
-
-/*
- * Halt an active scatter/gather DMA operation.
- */
-void
-ppc4xx_disable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command &= ~SSG_ENABLE(psgl->dmanr);
-	mtdcr(DCRN_ASGC, sg_command);	/* stop transfer */
-}
-
-/*
- *  Returns number of bytes left to be transferred from the entire sgl list.
- *  *src_addr and *dst_addr get set to the source/destination address of
- *  the sgl descriptor where the DMA stopped.
- *
- *  An sgl transfer must NOT be active when this function is called.
- */
-int
-ppc4xx_get_dma_sgl_residue(sgl_handle_t handle, phys_addr_t * src_addr,
-			   phys_addr_t * dst_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	ppc_sgl_t *pnext, *sgl_addr;
-	uint32_t count_left;
-
-	if (!handle) {
-		printk("ppc4xx_get_dma_sgl_residue: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_get_dma_sgl_residue: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
-	count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
-
-	if (!sgl_addr) {
-		printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
-		goto error;
-	}
-
-	pnext = psgl->phead;
-	while (pnext &&
-	       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE) &&
-		(pnext != sgl_addr))
-	    ) {
-		pnext++;
-	}
-
-	if (pnext == sgl_addr) {	/* found the sgl descriptor */
-
-		*src_addr = pnext->src_addr;
-		*dst_addr = pnext->dst_addr;
-
-		/*
-		 * Now search the remaining descriptors and add their count.
-		 * We already have the remaining count from this descriptor in
-		 * count_left.
-		 */
-		pnext++;
-
-		while ((pnext != psgl->ptail) &&
-		       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE))
-		    ) {
-			count_left += pnext->control_count & SG_COUNT_MASK;
-		}
-
-		if (pnext != psgl->ptail) {	/* should never happen */
-			printk
-			    ("ppc4xx_get_dma_sgl_residue error (1) psgl->ptail 0x%x handle 0x%x\n",
-			     (unsigned int) psgl->ptail, (unsigned int) handle);
-			goto error;
-		}
-
-		/* success */
-		p_dma_ch = &dma_channels[psgl->dmanr];
-		return (count_left << p_dma_ch->shift);	/* count in bytes */
-
-	} else {
-		/* this shouldn't happen */
-		printk
-		    ("get_dma_sgl_residue, unable to match current address 0x%x, handle 0x%x\n",
-		     (unsigned int) sgl_addr, (unsigned int) handle);
-
-	}
-
-      error:
-	*src_addr = (phys_addr_t) NULL;
-	*dst_addr = (phys_addr_t) NULL;
-	return 0;
-}
-
-/*
- * Returns the address(es) of the buffer(s) contained in the head element of
- * the scatter/gather list.  The element is removed from the scatter/gather
- * list and the next element becomes the head.
- *
- * This function should only be called when the DMA is not active.
- */
-int
-ppc4xx_delete_dma_sgl_element(sgl_handle_t handle, phys_addr_t * src_dma_addr,
-			      phys_addr_t * dst_dma_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_delete_sgl_element: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_delete_sgl_element: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!psgl->phead) {
-		printk("ppc4xx_delete_sgl_element: sgl list empty\n");
-		*src_dma_addr = (phys_addr_t) NULL;
-		*dst_dma_addr = (phys_addr_t) NULL;
-		return DMA_STATUS_SGL_LIST_EMPTY;
-	}
-
-	*src_dma_addr = (phys_addr_t) psgl->phead->src_addr;
-	*dst_dma_addr = (phys_addr_t) psgl->phead->dst_addr;
-
-	if (psgl->phead == psgl->ptail) {
-		/* last descriptor on the list */
-		psgl->phead = NULL;
-		psgl->ptail = NULL;
-	} else {
-		psgl->phead++;
-		psgl->phead_dma += sizeof(ppc_sgl_t);
-	}
-
-	return DMA_STATUS_GOOD;
-}
-
-
-/*
- *   Create a scatter/gather list handle.  This is simply a structure which
- *   describes a scatter/gather list.
- *
- *   A handle is returned in "handle" which the driver should save in order to
- *   be able to access this list later.  A chunk of memory will be allocated
- *   to be used by the API for internal management purposes, including managing
- *   the sg list and allocating memory for the sgl descriptors.  One page should
- *   be more than enough for that purpose.  Perhaps it's a bit wasteful to use
- *   a whole page for a single sg list, but most likely there will be only one
- *   sg list per channel.
- *
- *   Interrupt notes:
- *   Each sgl descriptor has a copy of the DMA control word which the DMA engine
- *   loads in the control register.  The control word has a "global" interrupt
- *   enable bit for that channel. Interrupts are further qualified by a few bits
- *   in the sgl descriptor count register.  In order to setup an sgl, we have to
- *   know ahead of time whether or not interrupts will be enabled at the completion
- *   of the transfers.  Thus, enable_dma_interrupt()/disable_dma_interrupt() MUST
- *   be called before calling alloc_dma_handle().  If the interrupt mode will never
- *   change after powerup, then enable_dma_interrupt()/disable_dma_interrupt()
- *   do not have to be called -- interrupts will be enabled or disabled based
- *   on how the channel was configured after powerup by the hw_init_dma_channel()
- *   function.  Each sgl descriptor will be setup to interrupt if an error occurs;
- *   however, only the last descriptor will be setup to interrupt. Thus, an
- *   interrupt will occur (if interrupts are enabled) only after the complete
- *   sgl transfer is done.
- */
-int
-ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode, unsigned int dmanr)
-{
-	sgl_list_info_t *psgl=NULL;
-	dma_addr_t dma_addr;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	uint32_t sg_command;
-	uint32_t ctc_settings;
-	void *ret;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_alloc_dma_handle: invalid channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!phandle) {
-		printk("ppc4xx_alloc_dma_handle: null handle pointer\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	/* Get a page of memory, which is zeroed out by consistent_alloc() */
-	ret = dma_alloc_coherent(NULL, DMA_PPC4xx_SIZE, &dma_addr, GFP_KERNEL);
-	if (ret != NULL) {
-		memset(ret, 0, DMA_PPC4xx_SIZE);
-		psgl = (sgl_list_info_t *) ret;
-	}
-
-	if (psgl == NULL) {
-		*phandle = (sgl_handle_t) NULL;
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	psgl->dma_addr = dma_addr;
-	psgl->dmanr = dmanr;
-
-	/*
-	 * Modify and save the control word. These words will be
-	 * written to each sgl descriptor.  The DMA engine then
-	 * loads this control word into the control register
-	 * every time it reads a new descriptor.
-	 */
-	psgl->control = p_dma_ch->control;
-	/* Clear all mode bits */
-	psgl->control &= ~(DMA_TM_MASK | DMA_TD);
-	/* Save control word and mode */
-	psgl->control |= (mode | DMA_CE_ENABLE);
-
-	/* In MM mode, we must set ETD/TCE */
-	if (mode == DMA_MODE_MM)
-		psgl->control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-
-	if (p_dma_ch->int_enable) {
-		/* Enable channel interrupt */
-		psgl->control |= DMA_CIE_ENABLE;
-	} else {
-		psgl->control &= ~DMA_CIE_ENABLE;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command |= SSG_MASK_ENABLE(dmanr);
-
-	/* Enable SGL control access */
-	mtdcr(DCRN_ASGC, sg_command);
-	psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
-
-	/* keep control count register settings */
-	ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
-		& (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
-	psgl->sgl_control |= ctc_settings;
-
-	if (p_dma_ch->int_enable) {
-		if (p_dma_ch->tce_enable)
-			psgl->sgl_control |= SG_TCI_ENABLE;
-		else
-			psgl->sgl_control |= SG_ETI_ENABLE;
-	}
-
-	*phandle = (sgl_handle_t) psgl;
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Destroy a scatter/gather list handle that was created by alloc_dma_handle().
- * The list must be empty (contain no elements).
- */
-void
-ppc4xx_free_dma_handle(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_free_dma_handle: got NULL\n");
-		return;
-	} else if (psgl->phead) {
-		printk("ppc4xx_free_dma_handle: list not empty\n");
-		return;
-	} else if (!psgl->dma_addr) {	/* should never happen */
-		printk("ppc4xx_free_dma_handle: no dma address\n");
-		return;
-	}
-
-	dma_free_coherent(NULL, DMA_PPC4xx_SIZE, (void *) psgl, 0);
-}
-
-EXPORT_SYMBOL(ppc4xx_alloc_dma_handle);
-EXPORT_SYMBOL(ppc4xx_free_dma_handle);
-EXPORT_SYMBOL(ppc4xx_add_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_delete_dma_sgl_element);
-EXPORT_SYMBOL(ppc4xx_enable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_disable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_get_dma_sgl_residue);
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
deleted file mode 100644
index bce9a75c80e3..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ /dev/null
@@ -1,126 +0,0 @@
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "ppc8xx_pic.h"
-
-extern int cpm_get_irq(void);
-
-/* The 8xx internal interrupt controller.  It is usually
- * the only interrupt controller.  Some boards, like the MBX and
- * Sandpoint have the 8259 as a secondary controller.  Depending
- * upon the processor type, the internal controller can have as
- * few as 16 interrupts or as many as 64.  We could use  the
- * "clear_bit()" and "set_bit()" functions like other platforms,
- * but they are overkill for us.
- */
-
-static void m8xx_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-		int bit, word;
-
-		bit = irq_nr & 0x1f;
-		word = irq_nr >> 5;
-
-		ppc_cached_irq_mask[word] |= (1 << (31-bit));
-		out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	}
-}
-
-
-static void m8xx_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
-}
-
-struct hw_interrupt_type ppc8xx_pic = {
-	.typename = " 8xx SIU  ",
-	.enable = m8xx_unmask_irq,
-	.disable = m8xx_mask_irq,
-	.ack = m8xx_mask_and_ack,
-	.end = m8xx_end_irq,
-};
-
-/*
- * We either return a valid interrupt or -1 if there is nothing pending
- */
-int
-m8xx_get_irq(struct pt_regs *regs)
-{
-	int irq;
-
-	/* For MPC8xx, read the SIVEC register and shift the bits down
-	 * to get the irq number.
-	 */
-	irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
-
-	/*
-	 * When we read the sivec without an interrupt to process, we will
-	 * get back SIU_LEVEL7.  In this case, return -1
-	 */
-        if (irq == CPM_INTERRUPT)
-        	irq = CPM_IRQ_OFFSET + cpm_get_irq();
-#if defined(CONFIG_PCI)
-	else if (irq == ISA_BRIDGE_INT) {
-		int isa_irq;
-
-		if ((isa_irq = i8259_poll(regs)) >= 0)
-			irq = I8259_IRQ_OFFSET + isa_irq;
-	}
-#endif	/* CONFIG_PCI */
-	else if (irq == SIU_LEVEL7)
-		irq = -1;
-
-	return irq;
-}
-
-#if defined(CONFIG_MBX) && defined(CONFIG_PCI)
-/* Only the MBX uses the external 8259.  This allows us to catch standard
- * drivers that may mess up the internal interrupt controllers, and also
- * allow them to run without modification on the MBX.
- */
-void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the 8259 cascade interrupt in the SIU
-	 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
-	 */
-}
-#endif	/* CONFIG_PCI */
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h
deleted file mode 100644
index 53bcd97ef7f5..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _PPC_KERNEL_PPC8xx_H
-#define _PPC_KERNEL_PPC8xx_H
-
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-extern struct hw_interrupt_type ppc8xx_pic;
-
-void m8xx_do_IRQ(struct pt_regs *regs,
-                 int            cpu);
-int m8xx_get_irq(struct pt_regs *regs);
-
-#ifdef CONFIG_MBX
-#include <asm/i8259.h>
-#include <asm/io.h>
-void mbx_i8259_action(int cpl, void *dev_id, struct pt_regs *regs);
-#endif
-
-#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
deleted file mode 100644
index 837183c24dfc..000000000000
--- a/arch/ppc/syslib/ppc_sys.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * PPC System library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/ppc_sys.h>
-
-int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-static int ppc_sys_inited;
-static int ppc_sys_func_inited;
-
-static const char *ppc_sys_func_names[] = {
-	[PPC_SYS_FUNC_DUMMY] = "dummy",
-	[PPC_SYS_FUNC_ETH] = "eth",
-	[PPC_SYS_FUNC_UART] = "uart",
-	[PPC_SYS_FUNC_HLDC] = "hldc",
-	[PPC_SYS_FUNC_USB] = "usb",
-	[PPC_SYS_FUNC_IRDA] = "irda",
-};
-
-void __init identify_ppc_sys_by_id(u32 id)
-{
-	unsigned int i = 0;
-	while (1) {
-		if ((ppc_sys_specs[i].mask & id) == ppc_sys_specs[i].value)
-			break;
-		i++;
-	}
-
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-void __init identify_ppc_sys_by_name(char *name)
-{
-	unsigned int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			break;
-		i++;
-	}
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-static int __init count_sys_specs(void)
-{
-	int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0])
-		i++;
-	return i;
-}
-
-static int __init find_chip_by_name_and_id(char *name, u32 id)
-{
-	int ret = -1;
-	unsigned int i = 0;
-	unsigned int j = 0;
-	unsigned int dups = 0;
-
-	unsigned char matched[count_sys_specs()];
-
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			matched[j++] = i;
-		i++;
-	}
-
-	ret = i;
-
-	if (j != 0) {
-		for (i = 0; i < j; i++) {
-			if ((ppc_sys_specs[matched[i]].mask & id) ==
-			    ppc_sys_specs[matched[i]].value) {
-				ret = matched[i];
-				dups++;
-			}
-		}
-		ret = (dups == 1) ? ret : (-1 * dups);
-	}
-	return ret;
-}
-
-void __init identify_ppc_sys_by_name_and_id(char *name, u32 id)
-{
-	int i = find_chip_by_name_and_id(name, id);
-	BUG_ON(i < 0);
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-}
-
-/* Update all memory resources by paddr, call before platform_device_register */
-void __init
-ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
-{
-	int i;
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-		if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && 
-			((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
-			r->start += paddr;
-			r->end += paddr;
-			r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
-		}
-	}
-}
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-void *__init ppc_sys_get_pdata(enum ppc_sys_devices dev)
-{
-	return ppc_sys_platform_devices[dev].dev.platform_data;
-}
-
-void ppc_sys_device_remove(enum ppc_sys_devices dev)
-{
-	unsigned int i;
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	} else {
-		if (cur_ppc_sys_spec == NULL)
-			return;
-		for (i = 0; i < cur_ppc_sys_spec->num_devices; i++)
-			if (cur_ppc_sys_spec->device_list[i] == dev)
-				cur_ppc_sys_spec->device_list[i] = -1;
-	}
-}
-
-/* Platform-notify mapping
- * Helper function for BSP code to assign board-specific platfom-divice bits
- */
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
-			 struct device *dev)
-{
-	struct platform_device *pdev;
-	int len, idx;
-	const char *s;
-
-	/* do nothing if no device or no bus_id */
-	if (!dev || !dev->bus_id)
-		return;
-
-	/* call per device map */
-	while (map->bus_id != NULL) {
-		idx = -1;
-		s = strrchr(dev->bus_id, '.');
-		if (s != NULL) {
-			idx = (int)simple_strtol(s + 1, NULL, 10);
-			len = s - dev->bus_id;
-		} else {
-			s = dev->bus_id;
-			len = strlen(dev->bus_id);
-		}
-
-		if (!strncmp(dev->bus_id, map->bus_id, len)) {
-			pdev = container_of(dev, struct platform_device, dev);
-			map->rtn(pdev, idx);
-		}
-		map++;
-	}
-}
-
-/*
-   Function assignment stuff.
- Intended to work as follows:
- the device name defined in foo_devices.c will be concatenated with :"func",
- where func is string map of respective function from platfom_device_func enum
-
- The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear
- in platform bus with unmodified name.
- */
-
-/*
-   Here we'll replace .name pointers with fixed-length strings
-   Hereby, this should be called *before* any func stuff triggeded.
- */
-void ppc_sys_device_initfunc(void)
-{
-	int i;
-	const char *name;
-	static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE];
-	enum ppc_sys_devices cur_dev;
-
-	/* If inited yet, do nothing */
-	if (ppc_sys_func_inited)
-		return;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0)
-			continue;
-
-		if (ppc_sys_platform_devices[cur_dev].name) {
-			/*backup name */
-			name = ppc_sys_platform_devices[cur_dev].name;
-			strlcpy(new_names[i], name, BUS_ID_SIZE);
-			ppc_sys_platform_devices[cur_dev].name = new_names[i];
-		}
-	}
-
-	ppc_sys_func_inited = 1;
-}
-
-/*The "engine" of the func stuff. Here we either concat specified function string description
- to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
-			    enum platform_device_func func)
-{
-	char *s;
-	char *name = (char *)ppc_sys_platform_devices[dev].name;
-	char tmp[BUS_ID_SIZE];
-
-	if (!ppc_sys_func_inited) {
-		printk(KERN_ERR "Unable to alter function - not inited!\n");
-		return;
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	}
-
-	if ((s = (char *)strchr(name, ':')) != NULL) {	/* reassign */
-		/* Either change the name after ':' or remove func modifications */
-		if (func != PPC_SYS_FUNC_DUMMY)
-			strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE);
-		else
-			*s = 0;
-	} else if (func != PPC_SYS_FUNC_DUMMY) {
-		/* do assignment if it is not just "clear"  request */
-		sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]);
-		strlcpy(name, tmp, BUS_ID_SIZE);
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_register(&ppc_sys_platform_devices[dev]);
-	}
-}
-
-void ppc_sys_device_disable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is enabled*/
-	if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) {
-		if (ppc_sys_inited) {
-			platform_device_unregister(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED;
-	}
-}
-
-void ppc_sys_device_enable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is disabled*/
-	if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) {
-		if (ppc_sys_inited) {
-			platform_device_register(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED;
-	}
-
-}
-
-void ppc_sys_device_enable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_enable(cur_dev);
-	}
-}
-
-void ppc_sys_device_disable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_disable(cur_dev);
-	}
-}
-
-
-static int __init ppc_sys_init(void)
-{
-	unsigned int i, dev_id, ret = 0;
-
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		dev_id = cur_ppc_sys_spec->device_list[i];
-		if ((dev_id != -1) &&
-		!(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) {
-			if (ppc_sys_device_fixup != NULL)
-				ppc_sys_device_fixup(&ppc_sys_platform_devices
-						     [dev_id]);
-			if (platform_device_register
-			    (&ppc_sys_platform_devices[dev_id])) {
-				ret = 1;
-				printk(KERN_ERR
-				       "unable to register device %d\n",
-				       dev_id);
-			}
-		}
-	}
-
-	ppc_sys_inited = 1;
-	return ret;
-}
-
-subsys_initcall(ppc_sys_init);
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
deleted file mode 100644
index fefbc217a56d..000000000000
--- a/arch/ppc/syslib/pq2_devices.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * PQ2 Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC82xx_CPM_FCC1] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11300,
-				.end	= 0x1131f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8400,
-				.end	= 0x84ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC1,
-				.end	= SIU_INT_FCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC2] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11320,
-				.end	= 0x1133f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8500,
-				.end	= 0x85ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC2,
-				.end	= SIU_INT_FCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC3] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11340,
-				.end	= 0x1135f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8600,
-				.end	= 0x86ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC3,
-				.end	= SIU_INT_FCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_I2C] = {
-		.name = "fsl-cpm-i2c",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "i2c_mem",
-				.start	= 0x11860,
-				.end	= 0x118BF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "i2c_pram",
-				.start 	= 0x8afc,
-				.end	= 0x8afd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_I2C,
-				.end	= SIU_INT_I2C,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A00,
-				.end	= 0x11A1F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8000,
-				.end	= 0x80ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC1,
-				.end	= SIU_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A20,
-				.end	= 0x11A3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8100,
-				.end	= 0x81ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC2,
-				.end	= SIU_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name 	= "regs",
-				.start	= 0x11A40,
-				.end	= 0x11A5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8200,
-				.end	= 0x82ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC3,
-				.end	= SIU_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A60,
-				.end	= 0x11A7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8300,
-				.end	= 0x83ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC4,
-				.end	= SIU_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SPI] = {
-		.name = "fsl-cpm-spi",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "spi_mem",
-				.start	= 0x11AA0,
-				.end	= 0x11AFF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "spi_pram",
-				.start	= 0x89fc,
-				.end	= 0x89fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SPI,
-				.end	= SIU_INT_SPI,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC1] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B30,
-				.end	= 0x11B3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8700,
-				.end	= 0x877f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC1,
-				.end	= SIU_INT_MCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC2] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B50,
-				.end	= 0x11B5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8800,
-				.end	= 0x887f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC2,
-				.end	= SIU_INT_MCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A80,
-				.end	= 0x11A8F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x87fc,
-				.end	= 0x87fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC1,
-				.end	= SIU_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A90,
-				.end	= 0x11A9F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x88fc,
-				.end	= 0x88fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC2,
-				.end	= SIU_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_USB] = {
-		.name = "fsl-cpm-usb",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "usb_mem",
-				.start	= 0x11b60,
-				.end	= 0x11b78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "usb_pram",
-				.start	= 0x8b00,
-				.end	= 0x8bff,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_USB,
-				.end	= SIU_INT_USB,
-				.flags	= IORESOURCE_IRQ,
-			},
-
-		},
-	},
-	[MPC82xx_SEC1] = {
-		.name = "fsl-sec",
-		.id = 1,
-		.num_resources = 1,
-		.resource = (struct resource[]) {
-			{
-				.name	= "sec_mem",
-				.start	= 0x40000,
-				.end	= 0x52fff,
-				.flags	= IORESOURCE_MEM,
-			},
-		},
-	},
-	[MPC82xx_MDIO_BB] = {
-		.name = "fsl-bb-mdio",
-		.id = 0,
-		.num_resources = 0,
-	},
-};
-
-static int __init mach_mpc82xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc82xx_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("mach_mpc82xx_init:enter", 0);
-	ppc_sys_device_fixup = mach_mpc82xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc82xx_init);
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
deleted file mode 100644
index 9c85300846c7..000000000000
--- a/arch/ppc/syslib/pq2_sys.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * PQ2 System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	/* below is a list of the 8260 family of processors */
-	{
-		.ppc_sys_name	= "8250",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8255",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 11,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
-			MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8260",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8264",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8265",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8266",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	/* below is a list of the 8272 family of processors */
-	{
-		.ppc_sys_name	= "8247",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8248",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-		},
-	},
-	{
-		.ppc_sys_name	= "8271",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8272",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-			MPC82xx_MDIO_BB,
-		},
-	},
-	/* below is a list of the 8280 family of processors */
-	{
-		.ppc_sys_name	= "8270",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8275",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8280",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
deleted file mode 100644
index 474dccbc4a8a..000000000000
--- a/arch/ppc/syslib/prep_nvram.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1998  Corey Minyard
- *
- * This reads the NvRAM on PReP compliant machines (generally from IBM or
- * Motorola).  Motorola kept the format of NvRAM in their ROM, PPCBUG, the
- * same, long after they had stopped producing PReP compliant machines.  So
- * this code is useful in those cases as well.
- *
- */
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-
-static char nvramData[MAX_PREP_NVRAM];
-static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
-
-unsigned char prep_nvram_read_val(int addr)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-	return inb(PREP_NVRAM_DATA);
-}
-
-void prep_nvram_write_val(int           addr,
-			  unsigned char val)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-   	outb(val, PREP_NVRAM_DATA);
-}
-
-void __init init_prep_nvram(void)
-{
-	unsigned char *nvp;
-	int  i;
-	int  nvramSize;
-
-	/*
-	 * The following could fail if the NvRAM were corrupt but
-	 * we expect the boot firmware to have checked its checksum
-	 * before boot
-	 */
-	nvp = (char *) &nvram->Header;
-	for (i=0; i<sizeof(HEADER); i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-
-	/*
-	 * The PReP NvRAM may be any size so read in the header to
-	 * determine how much we must read in order to get the complete
-	 * GE area
-	 */
-	nvramSize=(int)nvram->Header.GEAddress+nvram->Header.GELength;
-	if(nvramSize>MAX_PREP_NVRAM)
-	{
-		/*
-		 * NvRAM is too large
-		 */
-		nvram->Header.GELength=0;
-		return;
-	}
-
-	/*
-	 * Read the remainder of the PReP NvRAM
-	 */
-	nvp = (char *) &nvram->GEArea[0];
-	for (i=sizeof(HEADER); i<nvramSize; i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-}
-
-char *prep_nvram_get_var(const char *name)
-{
-	char *cp;
-	int  namelen;
-
-	namelen = strlen(name);
-	cp = prep_nvram_first_var();
-	while (cp != NULL) {
-		if ((strncmp(name, cp, namelen) == 0)
-		    && (cp[namelen] == '='))
-		{
-			return cp+namelen+1;
-		}
-		cp = prep_nvram_next_var(cp);
-	}
-
-	return NULL;
-}
-
-char *prep_nvram_first_var(void)
-{
-        if (nvram->Header.GELength == 0) {
-		return NULL;
-	} else {
-		return (((char *)nvram)
-			+ ((unsigned int) nvram->Header.GEAddress));
-	}
-}
-
-char *prep_nvram_next_var(char *name)
-{
-	char *cp;
-
-
-	cp = name;
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp != '\0'))
-	{
-		cp++;
-	}
-
-	/* Skip over any null characters. */
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp == '\0'))
-	{
-		cp++;
-	}
-
-	if ((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength) {
-		return cp;
-	} else {
-		return NULL;
-	}
-}
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c
deleted file mode 100644
index 7a97c7440b30..000000000000
--- a/arch/ppc/syslib/qspan_pci.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * QSpan pci routines.
- * Most 8xx boards use the QSpan PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- *
- * The RPX Classic implementation shares a chip select for normal
- * PCI access and QSpan control register addresses.  The selection is
- * further selected by a bit setting in a board control register.
- * Although it should happen, we disable interrupts during this operation
- * to make sure some driver doesn't accidentally access the PCI while
- * we have switched the chip select.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/mpc8xx.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-/*
- * This blows......
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_qspan_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr) : " %0")
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-static DEFINE_SPINLOCK(pcibios_lock);
-
-int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
-			     unsigned short index, unsigned char *bus_ptr,
-			     unsigned char *dev_fn_ptr)
-{
-    int num, devfn;
-    unsigned int x, vendev;
-
-    if (vendor == 0xffff)
-	return PCIBIOS_BAD_VENDOR_ID;
-    vendev = (dev_id << 16) + vendor;
-    num = 0;
-    for (devfn = 0;  devfn < 32;  devfn++) {
-	qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
-	if (x == vendev) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devfn<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
-			    unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
-{
-    int devnr, x, num;
-
-    num = 0;
-    for (devnr = 0;  devnr < 32;  devnr++) {
-	qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
-	if ((x>>8) == class_code) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devnr<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-void __init
-m8xx_pcibios_fixup(void)
-{
-   /* Lots to do here, all board and configuration specific. */
-}
-
-void __init
-m8xx_setup_pci_ptrs(void)
-{
-	set_config_access_method(qspan);
-
-	ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
-}
-
diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c
deleted file mode 100644
index a8168b8e5683..000000000000
--- a/arch/ppc/syslib/todc_time.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/*
- * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
- * Real Time Clocks/Timekeepers.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-/*
- * Depending on the hardware on your board and your board design, the
- * RTC/NVRAM may be accessed either directly (like normal memory) or via
- * address/data registers.  If your board uses the direct method, set
- * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
- * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
- * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
- * address of the upper byte (leave NULL if using mc146818), and set
- * 'nvram_data' to the address of the 8-bit data register.
- *
- * In order to break the assumption that the RTC and NVRAM are accessed by
- * the same mechanism, you need to explicitly set 'ppc_md.rtc_read_val' and
- * 'ppc_md.rtc_write_val', otherwise the values of 'ppc_md.rtc_read_val'
- * and 'ppc_md.rtc_write_val' will be used.
- *
- * Note: Even though the documentation for the various RTC chips say that it
- * 	 take up to a second before it starts updating once the 'R' bit is
- * 	 cleared, they always seem to update even though we bang on it many
- * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
- * 	 (possibly others).  Those chips seem to have a real problem whenever
- * 	 we set the 'R' bit before reading them, they basically stop counting.
- * 	 					--MAG
- */
-
-/*
- * 'todc_info' should be initialized in your *_setup.c file to
- * point to a fully initialized 'todc_info_t' structure.
- * This structure holds all the register offsets for your particular
- * TODC/RTC chip.
- * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
- */
-
-#ifdef	RTC_FREQ_SELECT
-#undef	RTC_FREQ_SELECT
-#define	RTC_FREQ_SELECT		control_b	/* Register A */
-#endif
-
-#ifdef	RTC_CONTROL
-#undef	RTC_CONTROL
-#define	RTC_CONTROL		control_a	/* Register B */
-#endif
-
-#ifdef	RTC_INTR_FLAGS
-#undef	RTC_INTR_FLAGS
-#define	RTC_INTR_FLAGS		watchdog	/* Register C */
-#endif
-
-#ifdef	RTC_VALID
-#undef	RTC_VALID
-#define	RTC_VALID		interrupts	/* Register D */
-#endif
-
-/* Access routines when RTC accessed directly (like normal memory) */
-u_char
-todc_direct_read_val(int addr)
-{
-	return readb((void __iomem *)(todc_info->nvram_data + addr));
-}
-
-void
-todc_direct_write_val(int addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
-	return;
-}
-
-/* Access routines for accessing m48txx type chips via addr/data regs */
-u_char
-todc_m48txx_read_val(int addr)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	return inb(todc_info->nvram_data);
-}
-
-void
-todc_m48txx_write_val(int addr, unsigned char val)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-   	outb(val, todc_info->nvram_data);
-	return;
-}
-
-/* Access routines for accessing mc146818 type chips via addr/data regs */
-u_char
-todc_mc146818_read_val(int addr)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	return inb_p(todc_info->nvram_data);
-}
-
-void
-todc_mc146818_write_val(int addr, unsigned char val)
-{
-	outb_p(addr, todc_info->nvram_as0);
-   	outb_p(val, todc_info->nvram_data);
-}
-
-
-/*
- * Routines to make RTC chips with NVRAM buried behind an addr/data pair
- * have the NVRAM and clock regs appear at the same level.
- * The NVRAM will appear to start at addr 0 and the clock regs will appear
- * to start immediately after the NVRAM (actually, start at offset
- * todc_info->nvram_size).
- */
-static inline u_char
-todc_read_val(int addr)
-{
-	u_char	val;
-
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			val = ppc_md.rtc_read_val(addr);
-		}
-	}
-	else {
-		val = ppc_md.rtc_read_val(addr);
-	}
-
-	return val;
-}
-
-static inline void
-todc_write_val(int addr, u_char val)
-{
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			ppc_md.rtc_write_val(addr, val);
-		}
-	}
-	else {
-		ppc_md.rtc_write_val(addr, val);
-	}
-}
-
-/*
- * TODC routines
- *
- * There is some ugly stuff in that there are assumptions for the mc146818.
- *
- * Assumptions:
- *	- todc_info->control_a has the offset as mc146818 Register B reg
- *	- todc_info->control_b has the offset as mc146818 Register A reg
- *	- m48txx control reg's write enable or 'W' bit is same as
- *	  mc146818 Register B 'SET' bit (i.e., 0x80)
- *
- * These assumptions were made to make the code simpler.
- */
-long __init
-todc_time_init(void)
-{
-	u_char	cntl_b;
-
-	if (!ppc_md.rtc_read_val)
-		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
-	if (!ppc_md.rtc_write_val)
-		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
-	
-	cntl_b = todc_read_val(todc_info->control_b);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		if ((cntl_b & 0x70) != 0x20) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			cntl_b &= ~0x70;
-			cntl_b |= 0x20;
-		}
-
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
-		u_char mode;
-
-		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
-		/* Make sure countdown clear is not set */
-		mode &= ~0x40;
-		/* Enable oscillator, extended register set */
-		mode |= 0x30;
-		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
-
-	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
-		u_char	month;
-
-		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
-		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
-
-		month = todc_read_val(todc_info->month);
-
-		if ((month & 0x80) == 0x80) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			month &= ~0x80;
-			todc_write_val(todc_info->month, month);
-		}
-
-		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else { /* must be a m48txx type */
-		u_char	cntl_a;
-
-		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
-		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
-
-		cntl_a = todc_read_val(todc_info->control_a);
-
-		/* Check & clear STOP bit in control B register */
-		if (cntl_b & TODC_MK48TXX_DAY_CB) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-
-			cntl_a |= todc_info->enable_write;
-			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
-
-			todc_write_val(todc_info->control_a, cntl_a);
-			todc_write_val(todc_info->control_b, cntl_b);
-		}
-
-		/* Make sure READ & WRITE bits are cleared. */
-		cntl_a &= ~(todc_info->enable_write |
-			    todc_info->enable_read);
-		todc_write_val(todc_info->control_a, cntl_a);
-	}
-
-	return 0;
-}
-
-/*
- * There is some ugly stuff in that there are assumptions that for a mc146818,
- * the todc_info->control_a has the offset of the mc146818 Register B reg and
- * that the register'ss 'SET' bit is the same as the m48txx's write enable
- * bit in the control register of the m48txx (i.e., 0x80).
- *
- * It was done to make the code look simpler.
- */
-ulong
-todc_get_rtc_time(void)
-{
-	uint	year = 0, mon = 0, day = 0, hour = 0, min = 0, sec = 0;
-	uint	limit, i;
-	u_char	save_control, uip = 0;
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		limit = 1;
-
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-		}
-	}
-	else {
-		limit = 100000000;
-	}
-
-	for (i=0; i<limit; i++) {
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		}
-
-		sec = todc_read_val(todc_info->seconds) & 0x7f;
-		min = todc_read_val(todc_info->minutes) & 0x7f;
-		hour = todc_read_val(todc_info->hours) & 0x3f;
-		day = todc_read_val(todc_info->day_of_month) & 0x3f;
-		mon = todc_read_val(todc_info->month) & 0x1f;
-		year = todc_read_val(todc_info->year) & 0xff;
-
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
-			if ((uip & RTC_UIP) == 0) break;
-		}
-	}
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				save_control &= ~(todc_info->enable_read);
-				todc_write_val(todc_info->control_a,
-						       save_control);
-		}
-	}
-	spin_unlock(&rtc_lock);
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	year = year + 1900;
-	if (year < 1970) {
-		year += 100;
-	}
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-int
-todc_set_rtc_time(unsigned long nowtime)
-{
-	struct rtc_time	tm;
-	u_char		save_control, save_freq_select = 0;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = todc_read_val(todc_info->control_a);
-
-	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
-	todc_write_val(todc_info->control_a,
-			       (save_control | todc_info->enable_write));
-	save_control &= ~(todc_info->enable_write); /* in case it was set */
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		todc_write_val(todc_info->RTC_FREQ_SELECT,
-				       save_freq_select | RTC_DIV_RESET2);
-	}
-
-
-        tm.tm_year = (tm.tm_year - 1900) % 100;
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-
-	todc_write_val(todc_info->seconds,      tm.tm_sec);
-	todc_write_val(todc_info->minutes,      tm.tm_min);
-	todc_write_val(todc_info->hours,        tm.tm_hour);
-	todc_write_val(todc_info->month,        tm.tm_mon);
-	todc_write_val(todc_info->day_of_month, tm.tm_mday);
-	todc_write_val(todc_info->year,         tm.tm_year);
-
-	todc_write_val(todc_info->control_a, save_control);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
-	}
-	spin_unlock(&rtc_lock);
-
-	return 0;
-}
-
-/*
- * Manipulates read bit to reliably read seconds at a high rate.
- */
-static unsigned char __init todc_read_timereg(int addr)
-{
-	unsigned char save_control = 0, val;
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control = todc_read_val(todc_info->control_a);
-			todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-	}
-	val = todc_read_val(addr);
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control &= ~(todc_info->enable_read);
-			todc_write_val(todc_info->control_a, save_control);
-	}
-
-	return val;
-}
-
-/*
- * This was taken from prep_setup.c
- * Use the NVRAM RTC to time a second to calibrate the decrementer.
- */
-void __init
-todc_calibrate_decr(void)
-{
-	ulong	freq;
-	ulong	tbl, tbu;
-        long	i, loop_count;
-        u_char	sec;
-
-	todc_time_init();
-
-	/*
-	 * Actually this is bad for precision, we should have a loop in
-	 * which we only read the seconds counter. todc_read_val writes
-	 * the address bytes on every call and this takes a lot of time.
-	 * Perhaps an nvram_wait_change method returning a time
-	 * stamp with a loop count as parameter would be the solution.
-	 */
-	/*
-	 * Need to make sure the tbl doesn't roll over so if tbu increments
-	 * during this test, we need to do it again.
-	 */
-	loop_count = 0;
-
-	sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-	do {
-		tbu = get_tbu();
-
-		for (i = 0 ; i < 10000000 ; i++) {/* may take up to 1 second */
-		   tbl = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-		for (i = 0 ; i < 10000000 ; i++) { /* Should take 1 second */
-		   freq = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		freq -= tbl;
-	} while ((get_tbu() != tbu) && (++loop_count < 2));
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
deleted file mode 100644
index 7322781be1c6..000000000000
--- a/arch/ppc/syslib/virtex_devices.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Virtex hard ppc405 core common device listing
- *
- * Copyright 2005-2007 Secret Lab Technologies Ltd.
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2002-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/io.h>
-
-/*
- * UARTLITE: shortcut macro for single instance
- */
-#define XPAR_UARTLITE(num) { \
-	.name = "uartlite", \
-	.id = num, \
-	.num_resources = 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
-			.end = XPAR_UARTLITE_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * Full UART: shortcut macro for single instance + platform data structure
- */
-#define XPAR_UART(num) { \
-	.mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
-	.irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
-	.iotype = UPIO_MEM, \
-	.uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
-	.flags = UPF_BOOT_AUTOCONF, \
-	.regshift = 2, \
-}
-
-/*
- * SystemACE: shortcut macro for single instance
- */
-#define XPAR_SYSACE(num) { \
-	.name		= "xsysace", \
-	.id		= XPAR_SYSACE_##num##_DEVICE_ID, \
-	.num_resources	= 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start	= XPAR_SYSACE_##num##_BASEADDR, \
-			.end	= XPAR_SYSACE_##num##_HIGHADDR, \
-			.flags	= IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start	= XPAR_INTC_0_SYSACE_##num##_VEC_ID, \
-			.flags	= IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * ML300/ML403 Video Device: shortcut macro for single instance
- */
-#define XPAR_TFT(num) { \
-	.name = "xilinxfb", \
-	.id = num, \
-	.num_resources = 1, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_TFT_##num##_BASEADDR, \
-			.end = XPAR_TFT_##num##_BASEADDR+7, \
-			.flags = IORESOURCE_IO, \
-		}, \
-	}, \
-}
-
-#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
-	.name = "ml403_ac97cr", \
-	.id = num, \
-	.num_resources = 3, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
-			.end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/* UART 8250 driver platform data table */
-struct plat_serial8250_port virtex_serial_platform_data[] = {
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	XPAR_UART(0),
-#endif
-#if defined(XPAR_UARTNS550_1_BASEADDR)
-	XPAR_UART(1),
-#endif
-#if defined(XPAR_UARTNS550_2_BASEADDR)
-	XPAR_UART(2),
-#endif
-#if defined(XPAR_UARTNS550_3_BASEADDR)
-	XPAR_UART(3),
-#endif
-#if defined(XPAR_UARTNS550_4_BASEADDR)
-	XPAR_UART(4),
-#endif
-#if defined(XPAR_UARTNS550_5_BASEADDR)
-	XPAR_UART(5),
-#endif
-#if defined(XPAR_UARTNS550_6_BASEADDR)
-	XPAR_UART(6),
-#endif
-#if defined(XPAR_UARTNS550_7_BASEADDR)
-	XPAR_UART(7),
-#endif
-	{ }, /* terminated by empty record */
-};
-
-
-struct platform_device virtex_platform_devices[] = {
-	/* UARTLITE instances */
-#if defined(XPAR_UARTLITE_0_BASEADDR)
-	XPAR_UARTLITE(0),
-#endif
-#if defined(XPAR_UARTLITE_1_BASEADDR)
-	XPAR_UARTLITE(1),
-#endif
-#if defined(XPAR_UARTLITE_2_BASEADDR)
-	XPAR_UARTLITE(2),
-#endif
-#if defined(XPAR_UARTLITE_3_BASEADDR)
-	XPAR_UARTLITE(3),
-#endif
-#if defined(XPAR_UARTLITE_4_BASEADDR)
-	XPAR_UARTLITE(4),
-#endif
-#if defined(XPAR_UARTLITE_5_BASEADDR)
-	XPAR_UARTLITE(5),
-#endif
-#if defined(XPAR_UARTLITE_6_BASEADDR)
-	XPAR_UARTLITE(6),
-#endif
-#if defined(XPAR_UARTLITE_7_BASEADDR)
-	XPAR_UARTLITE(7),
-#endif
-
-	/* Full UART instances */
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	{
-		.name		= "serial8250",
-		.id		= 0,
-		.dev.platform_data = virtex_serial_platform_data,
-	},
-#endif
-
-	/* SystemACE instances */
-#if defined(XPAR_SYSACE_0_BASEADDR)
-	XPAR_SYSACE(0),
-#endif
-#if defined(XPAR_SYSACE_1_BASEADDR)
-	XPAR_SYSACE(1),
-#endif
-
-#if defined(XPAR_TFT_0_BASEADDR)
-	XPAR_TFT(0),
-#endif
-#if defined(XPAR_TFT_1_BASEADDR)
-	XPAR_TFT(1),
-#endif
-#if defined(XPAR_TFT_2_BASEADDR)
-	XPAR_TFT(2),
-#endif
-#if defined(XPAR_TFT_3_BASEADDR)
-	XPAR_TFT(3),
-#endif
-
-	/* AC97 Controller Reference instances */
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(0),
-#endif
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(1),
-#endif
-};
-
-/* Early serial support functions */
-static void __init
-virtex_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-virtex_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = virtex_serial_platform_data;
-	while(pdata && pdata->flags) {
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		virtex_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
-/*
- * default fixup routine; do nothing and return success.
- *
- * Reimplement this routine in your custom board support file to
- * override the default behaviour
- */
-int __attribute__ ((weak))
-virtex_device_fixup(struct platform_device *dev)
-{
-	return 0;
-}
-
-static int __init virtex_init(void)
-{
-	struct platform_device *index = virtex_platform_devices;
-	unsigned int ret = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) {
-		if (virtex_device_fixup(index) != 0)
-			continue;
-
-		if (platform_device_register(index)) {
-			ret = 1;
-			printk(KERN_ERR "cannot register dev %s:%d\n",
-			       index->name, index->id);
-		}
-	}
-	return ret;
-}
-
-subsys_initcall(virtex_init);
diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h
deleted file mode 100644
index 6ebd9b4b8f1c..000000000000
--- a/arch/ppc/syslib/virtex_devices.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Common support header for virtex ppc405 platforms
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_VIRTEX_DEVICES_H__
-#define __ASM_VIRTEX_DEVICES_H__
-
-#include <linux/platform_device.h>
-#include <linux/xilinxfb.h>
-
-void __init virtex_early_serial_map(void);
-
-/* Prototype for device fixup routine.  Implement this routine in the
- * board specific fixup code and the generic setup code will call it for
- * each device is the platform device list.
- *
- * If the hook returns a non-zero value, then the device will not get
- * registered with the platform bus
- */
-int virtex_device_fixup(struct platform_device *dev);
-
-/* SPI Controller IP */
-struct xspi_platform_data {
-	s16 bus_num;
-	u16 num_chipselect;
-	u32 speed_hz;
-};
-
-#endif  /* __ASM_VIRTEX_DEVICES_H__ */
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
deleted file mode 100644
index 3b82333e96d8..000000000000
--- a/arch/ppc/syslib/xilinx_pic.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex-II Pro.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/ibm4xx.h>
-#include <asm/machdep.h>
-
-/* No one else should require these constants, so define them locally here. */
-#define ISR 0			/* Interrupt Status Register */
-#define IPR 1			/* Interrupt Pending Register */
-#define IER 2			/* Interrupt Enable Register */
-#define IAR 3			/* Interrupt Acknowledge Register */
-#define SIE 4			/* Set Interrupt Enable bits */
-#define CIE 5			/* Clear Interrupt Enable bits */
-#define IVR 6			/* Interrupt Vector Register */
-#define MER 7			/* Master Enable Register */
-
-#if XPAR_XINTC_USE_DCR == 0
-static volatile u32 *intc;
-#define intc_out_be32(addr, mask)     out_be32((addr), (mask))
-#define intc_in_be32(addr)            in_be32((addr))
-#else
-#define intc    XPAR_INTC_0_BASEADDR
-#define intc_out_be32(addr, mask)     mtdcr((addr), (mask))
-#define intc_in_be32(addr)            mfdcr((addr))
-#endif
-
-static void
-xilinx_intc_enable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("enable: %d\n", irq);
-	intc_out_be32(intc + SIE, mask);
-}
-
-static void
-xilinx_intc_disable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-}
-
-static void
-xilinx_intc_disable_and_ack(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable_and_ack: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-	if (!(irq_desc[irq].status & IRQ_LEVEL))
-		intc_out_be32(intc + IAR, mask);	/* ack edge triggered intr */
-}
-
-static void
-xilinx_intc_end(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-
-	pr_debug("end: %d\n", irq);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-		intc_out_be32(intc + SIE, mask);
-		/* ack level sensitive intr */
-		if (irq_desc[irq].status & IRQ_LEVEL)
-			intc_out_be32(intc + IAR, mask);
-	}
-}
-
-static struct hw_interrupt_type xilinx_intc = {
-	.typename = "Xilinx Interrupt Controller",
-	.enable = xilinx_intc_enable,
-	.disable = xilinx_intc_disable,
-	.ack = xilinx_intc_disable_and_ack,
-	.end = xilinx_intc_end,
-};
-
-int
-xilinx_pic_get_irq(void)
-{
-	int irq;
-
-	/*
-	 * NOTE: This function is the one that needs to be improved in
-	 * order to handle multiple interrupt controllers.  It currently
-	 * is hardcoded to check for interrupts only on the first INTC.
-	 */
-
-	irq = intc_in_be32(intc + IVR);
-	if (irq != -1)
-		irq = irq;
-
-	pr_debug("get_irq: %d\n", irq);
-
-	return (irq);
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * NOTE: The assumption here is that NR_IRQS is 32 or less
-	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
-	 */
-#if (NR_IRQS > 32)
-#error NR_IRQS > 32 not supported
-#endif
-
-#if XPAR_XINTC_USE_DCR == 0
-	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
-
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
-#else
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR);
-#endif
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	intc_out_be32(intc + IER, 0);
-
-	/* Acknowledge any pending interrupts just in case. */
-	intc_out_be32(intc + IAR, ~(u32) 0);
-
-	/* Turn on the Master Enable. */
-	intc_out_be32(intc + MER, 0x3UL);
-
-	ppc_md.get_irq = xilinx_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; ++i) {
-		irq_desc[i].chip = &xilinx_intc;
-
-		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
-			irq_desc[i].status &= ~IRQ_LEVEL;
-		else
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/xmon/Makefile b/arch/ppc/xmon/Makefile
deleted file mode 100644
index 9aa260b926f5..000000000000
--- a/arch/ppc/xmon/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# Makefile for xmon
-
-ifdef CONFIG_8xx
-obj-y		:= start_8xx.o
-else
-obj-y		:= start.o
-endif
-obj-y		+= xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o
diff --git a/arch/ppc/xmon/ansidecl.h b/arch/ppc/xmon/ansidecl.h
deleted file mode 100644
index c9b9f0929e9e..000000000000
--- a/arch/ppc/xmon/ansidecl.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* ANSI and traditional C compatibility macros
-   Copyright 1991, 1992 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   ANSI C is assumed if __STDC__ is #defined.
-
-   Macro	ANSI C definition	Traditional C definition
-   -----	---- - ----------	----------- - ----------
-   PTR		`void *'		`char *'
-   LONG_DOUBLE	`long double'		`double'
-   VOLATILE	`volatile'		`'
-   SIGNED	`signed'		`'
-   PTRCONST	`void *const'		`char *'
-   ANSI_PROTOTYPES  1			not defined
-
-   CONST is also defined, but is obsolete.  Just use const.
-
-   DEFUN (name, arglist, args)
-
-	Defines function NAME.
-
-	ARGLIST lists the arguments, separated by commas and enclosed in
-	parentheses.  ARGLIST becomes the argument list in traditional C.
-
-	ARGS list the arguments with their types.  It becomes a prototype in
-	ANSI C, and the type declarations in traditional C.  Arguments should
-	be separated with `AND'.  For functions with a variable number of
-	arguments, the last thing listed should be `DOTS'.
-
-   DEFUN_VOID (name)
-
-	Defines a function NAME, which takes no arguments.
-
-   obsolete --     EXFUN (name, (prototype))	-- obsolete.
-
-	Replaced by PARAMS.  Do not use; will disappear someday soon.
-	Was used in external function declarations.
-	In ANSI C it is `NAME PROTOTYPE' (so PROTOTYPE should be enclosed in
-	parentheses).  In traditional C it is `NAME()'.
-	For a function that takes no arguments, PROTOTYPE should be `(void)'.
-
-    PARAMS ((args))
-
-	We could use the EXFUN macro to handle prototype declarations, but
-	the name is misleading and the result is ugly.  So we just define a
-	simple macro to handle the parameter lists, as in:
-
-	      static int foo PARAMS ((int, char));
-
-	This produces:  `static int foo();' or `static int foo (int, char);'
-
-	EXFUN would have done it like this:
-
-	      static int EXFUN (foo, (int, char));
-
-	but the function is not external...and it's hard to visually parse
-	the function name out of the mess.   EXFUN should be considered
-	obsolete; new code should be written to use PARAMS.
-
-    For example:
-	extern int printf PARAMS ((CONST char *format DOTS));
-	int DEFUN(fprintf, (stream, format),
-		  FILE *stream AND CONST char *format DOTS) { ... }
-	void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef	_ANSIDECL_H
-
-#define	_ANSIDECL_H	1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(WIN32)
-/* All known AIX compilers implement these things (but don't always
-   define __STDC__).  The RISC/OS MIPS compiler defines these things
-   in SVR4 mode, but does not define __STDC__.  */
-
-#define	PTR		void *
-#define	PTRCONST	void *CONST
-#define	LONG_DOUBLE	long double
-
-#define	AND		,
-#define	NOARGS		void
-#define	CONST		const
-#define	VOLATILE	volatile
-#define	SIGNED		signed
-#define	DOTS		, ...
-
-#define	EXFUN(name, proto)		name proto
-#define	DEFUN(name, arglist, args)	name(args)
-#define	DEFUN_VOID(name)		name(void)
-
-#define PROTO(type, name, arglist)	type name arglist
-#define PARAMS(paramlist)		paramlist
-#define ANSI_PROTOTYPES			1
-
-#else	/* Not ANSI C.  */
-
-#define	PTR		char *
-#define	PTRCONST	PTR
-#define	LONG_DOUBLE	double
-
-#define	AND		;
-#define	NOARGS
-#define	CONST
-#ifndef const /* some systems define it in header files for non-ansi mode */
-#define	const
-#endif
-#define	VOLATILE
-#define	SIGNED
-#define	DOTS
-
-#define	EXFUN(name, proto)		name()
-#define	DEFUN(name, arglist, args)	name arglist args;
-#define	DEFUN_VOID(name)		name()
-#define PROTO(type, name, arglist) type name ()
-#define PARAMS(paramlist)		()
-
-#endif	/* ANSI C.  */
-
-#endif	/* ansidecl.h	*/
diff --git a/arch/ppc/xmon/nonstdio.h b/arch/ppc/xmon/nonstdio.h
deleted file mode 100644
index 0240bc573c96..000000000000
--- a/arch/ppc/xmon/nonstdio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-typedef int	FILE;
-extern FILE *xmon_stdin, *xmon_stdout;
-#define EOF	(-1)
-#define stdin	xmon_stdin
-#define stdout	xmon_stdout
-#define printf	xmon_printf
-#define fprintf	xmon_fprintf
-#define fputs	xmon_fputs
-#define fgets	xmon_fgets
-#define putchar	xmon_putchar
-#define getchar	xmon_getchar
-#define putc	xmon_putc
-#define getc	xmon_getc
-#define fopen(n, m)	NULL
-#define fflush(f)	do {} while (0)
-#define fclose(f)	do {} while (0)
-extern char *fgets(char *, int, void *);
-extern void xmon_fprintf(void *, const char *, ...);
-extern void xmon_sprintf(char *, const char *, ...);
-extern void xmon_puts(char*);
-
-#define perror(s)	printf("%s: no files!\n", (s))
diff --git a/arch/ppc/xmon/ppc-dis.c b/arch/ppc/xmon/ppc-dis.c
deleted file mode 100644
index 798ac1a677f6..000000000000
--- a/arch/ppc/xmon/ppc-dis.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* ppc-dis.c -- Disassemble PowerPC instructions
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "nonstdio.h"
-#include "ansidecl.h"
-#include "ppc.h"
-
-static int print_insn_powerpc PARAMS ((FILE *, unsigned long insn,
-				       unsigned memaddr, int dialect));
-
-extern void print_address PARAMS((unsigned memaddr));
-
-/* Print a big endian PowerPC instruction.  For convenience, also
-   disassemble instructions supported by the Motorola PowerPC 601.  */
-
-int
-print_insn_big_powerpc (FILE *out, unsigned long insn, unsigned memaddr)
-{
-  return print_insn_powerpc (out, insn, memaddr,
-			     PPC_OPCODE_PPC | PPC_OPCODE_601);
-}
-
-/* Print a PowerPC or POWER instruction.  */
-
-static int
-print_insn_powerpc (FILE *out, unsigned long insn, unsigned memaddr,
-		    int dialect)
-{
-  const struct powerpc_opcode *opcode;
-  const struct powerpc_opcode *opcode_end;
-  unsigned long op;
-
-  /* Get the major opcode of the instruction.  */
-  op = PPC_OP (insn);
-
-  /* Find the first match in the opcode table.  We could speed this up
-     a bit by doing a binary search on the major opcode.  */
-  opcode_end = powerpc_opcodes + powerpc_num_opcodes;
-  for (opcode = powerpc_opcodes; opcode < opcode_end; opcode++)
-    {
-      unsigned long table_op;
-      const unsigned char *opindex;
-      const struct powerpc_operand *operand;
-      int invalid;
-      int need_comma;
-      int need_paren;
-
-      table_op = PPC_OP (opcode->opcode);
-      if (op < table_op)
-		break;
-      if (op > table_op)
-		continue;
-
-      if ((insn & opcode->mask) != opcode->opcode
-	  || (opcode->flags & dialect) == 0)
-		continue;
-
-      /* Make two passes over the operands.  First see if any of them
-		 have extraction functions, and, if they do, make sure the
-		 instruction is valid.  */
-      invalid = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  operand = powerpc_operands + *opindex;
-		  if (operand->extract)
-		    (*operand->extract) (insn, &invalid);
-		}
-      if (invalid)
-		continue;
-
-      /* The instruction is valid.  */
-      fprintf(out, "%s", opcode->name);
-      if (opcode->operands[0] != 0)
-		fprintf(out, "\t");
-
-      /* Now extract and print the operands.  */
-      need_comma = 0;
-      need_paren = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  long value;
-
-		  operand = powerpc_operands + *opindex;
-
-		  /* Operands that are marked FAKE are simply ignored.  We
-		     already made sure that the extract function considered
-		     the instruction to be valid.  */
-		  if ((operand->flags & PPC_OPERAND_FAKE) != 0)
-		    continue;
-
-		  /* Extract the value from the instruction.  */
-		  if (operand->extract)
-		    value = (*operand->extract) (insn, (int *) 0);
-		  else
-		    {
-		      value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
-		      if ((operand->flags & PPC_OPERAND_SIGNED) != 0
-			  && (value & (1 << (operand->bits - 1))) != 0)
-			value -= 1 << operand->bits;
-		    }
-
-		  /* If the operand is optional, and the value is zero, don't
-		     print anything.  */
-		  if ((operand->flags & PPC_OPERAND_OPTIONAL) != 0
-		      && (operand->flags & PPC_OPERAND_NEXT) == 0
-		      && value == 0)
-		    continue;
-
-		  if (need_comma)
-		    {
-		      fprintf(out, ",");
-		      need_comma = 0;
-		    }
-
-		  /* Print the operand as directed by the flags.  */
-		  if ((operand->flags & PPC_OPERAND_GPR) != 0)
-		    fprintf(out, "r%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_FPR) != 0)
-		    fprintf(out, "f%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_RELATIVE) != 0)
-		    print_address (memaddr + value);
-		  else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0)
-		    print_address (value & 0xffffffff);
-		  else if ((operand->flags & PPC_OPERAND_CR) == 0
-			   || (dialect & PPC_OPCODE_PPC) == 0)
-		    fprintf(out, "%ld", value);
-		  else
-		    {
-		      if (operand->bits == 3)
-				fprintf(out, "cr%d", value);
-		      else
-			{
-			  static const char *cbnames[4] = { "lt", "gt", "eq", "so" };
-			  int cr;
-			  int cc;
-
-			  cr = value >> 2;
-			  if (cr != 0)
-			    fprintf(out, "4*cr%d", cr);
-			  cc = value & 3;
-			  if (cc != 0)
-			    {
-			      if (cr != 0)
-					fprintf(out, "+");
-			      fprintf(out, "%s", cbnames[cc]);
-			    }
-			}
-	    }
-
-	  if (need_paren)
-	    {
-	      fprintf(out, ")");
-	      need_paren = 0;
-	    }
-
-	  if ((operand->flags & PPC_OPERAND_PARENS) == 0)
-	    need_comma = 1;
-	  else
-	    {
-	      fprintf(out, "(");
-	      need_paren = 1;
-	    }
-	}
-
-      /* We have found and printed an instruction; return.  */
-      return 4;
-    }
-
-  /* We could not find a match.  */
-  fprintf(out, ".long 0x%lx", insn);
-
-  return 4;
-}
diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c
deleted file mode 100644
index 034313cef6e7..000000000000
--- a/arch/ppc/xmon/ppc-opc.c
+++ /dev/null
@@ -1,2720 +0,0 @@
-/* ppc-opc.c -- PowerPC opcode list
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <linux/posix_types.h>
-#include <linux/kernel.h>
-#include "ansidecl.h"
-#include "ppc.h"
-
-/* This file holds the PowerPC opcode table.  The opcode table
-   includes almost all of the extended instruction mnemonics.  This
-   permits the disassembler to use them, and simplifies the assembler
-   logic, at the cost of increasing the table size.  The table is
-   strictly constant data, so the compiler should be able to put it in
-   the .text section.
-
-   This file also holds the operand table.  All knowledge about
-   inserting operands into instructions and vice-versa is kept in this
-   file.  */
-
-/* Local insertion and extraction functions.  */
-
-static unsigned long insert_bat PARAMS ((unsigned long, long, const char **));
-static long extract_bat PARAMS ((unsigned long, int *));
-static unsigned long insert_bba PARAMS ((unsigned long, long, const char **));
-static long extract_bba PARAMS ((unsigned long, int *));
-static unsigned long insert_bd PARAMS ((unsigned long, long, const char **));
-static long extract_bd PARAMS ((unsigned long, int *));
-static unsigned long insert_bdm PARAMS ((unsigned long, long, const char **));
-static long extract_bdm PARAMS ((unsigned long, int *));
-static unsigned long insert_bdp PARAMS ((unsigned long, long, const char **));
-static long extract_bdp PARAMS ((unsigned long, int *));
-static unsigned long insert_bo PARAMS ((unsigned long, long, const char **));
-static long extract_bo PARAMS ((unsigned long, int *));
-static unsigned long insert_boe PARAMS ((unsigned long, long, const char **));
-static long extract_boe PARAMS ((unsigned long, int *));
-static unsigned long insert_ds PARAMS ((unsigned long, long, const char **));
-static long extract_ds PARAMS ((unsigned long, int *));
-static unsigned long insert_li PARAMS ((unsigned long, long, const char **));
-static long extract_li PARAMS ((unsigned long, int *));
-static unsigned long insert_mbe PARAMS ((unsigned long, long, const char **));
-static long extract_mbe PARAMS ((unsigned long, int *));
-static unsigned long insert_mb6 PARAMS ((unsigned long, long, const char **));
-static long extract_mb6 PARAMS ((unsigned long, int *));
-static unsigned long insert_nb PARAMS ((unsigned long, long, const char **));
-static long extract_nb PARAMS ((unsigned long, int *));
-static unsigned long insert_nsi PARAMS ((unsigned long, long, const char **));
-static long extract_nsi PARAMS ((unsigned long, int *));
-static unsigned long insert_ral PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ram PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ras PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_rbs PARAMS ((unsigned long, long, const char **));
-static long extract_rbs PARAMS ((unsigned long, int *));
-static unsigned long insert_sh6 PARAMS ((unsigned long, long, const char **));
-static long extract_sh6 PARAMS ((unsigned long, int *));
-static unsigned long insert_spr PARAMS ((unsigned long, long, const char **));
-static long extract_spr PARAMS ((unsigned long, int *));
-static unsigned long insert_tbr PARAMS ((unsigned long, long, const char **));
-static long extract_tbr PARAMS ((unsigned long, int *));
-
-/* The operands table.
-
-   The fields are bits, shift, signed, insert, extract, flags.  */
-
-const struct powerpc_operand powerpc_operands[] =
-{
-  /* The zero index is used to indicate the end of the list of
-     operands.  */
-#define UNUSED (0)
-  { 0, 0, NULL, NULL, 0 },
-
-  /* The BA field in an XL form instruction.  */
-#define BA (1)
-#define BA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BA field in an XL form instruction when it must be the same
-     as the BT field in the same instruction.  */
-#define BAT (2)
-  { 5, 16, insert_bat, extract_bat, PPC_OPERAND_FAKE },
-
-  /* The BB field in an XL form instruction.  */
-#define BB (3)
-#define BB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BB field in an XL form instruction when it must be the same
-     as the BA field in the same instruction.  */
-#define BBA (4)
-  { 5, 11, insert_bba, extract_bba, PPC_OPERAND_FAKE },
-
-  /* The BD field in a B form instruction.  The lower two bits are
-     forced to zero.  */
-#define BD (5)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when absolute addressing is
-     used.  */
-#define BDA (6)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDM (7)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used
-     and absolute address is used.  */
-#define BDMA (8)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDP (9)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used
-     and absolute addressing is used.  */
-#define BDPA (10)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BF field in an X or XL form instruction.  */
-#define BF (11)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR },
-
-  /* An optional BF field.  This is used for comparison instructions,
-     in which an omitted BF field is taken as zero.  */
-#define OBF (12)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The BFA field in an X or XL form instruction.  */
-#define BFA (13)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BI field in a B form or XL form instruction.  */
-#define BI (14)
-#define BI_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BO field in a B form instruction.  Certain values are
-     illegal.  */
-#define BO (15)
-#define BO_MASK (0x1f << 21)
-  { 5, 21, insert_bo, extract_bo, 0 },
-
-  /* The BO field in a B form instruction when the + or - modifier is
-     used.  This is like the BO field, but it must be even.  */
-#define BOE (16)
-  { 5, 21, insert_boe, extract_boe, 0 },
-
-  /* The BT field in an X or XL form instruction.  */
-#define BT (17)
-  { 5, 21, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The condition register number portion of the BI field in a B form
-     or XL form instruction.  This is used for the extended
-     conditional branch mnemonics, which set the lower two bits of the
-     BI field.  This field is optional.  */
-#define CR (18)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The D field in a D form instruction.  This is a displacement off
-     a register, and implies that the next operand is a register in
-     parentheses.  */
-#define D (19)
-  { 16, 0, NULL, NULL, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The DS field in a DS form instruction.  This is like D, but the
-     lower two bits are forced to zero.  */
-#define DS (20)
-  { 16, 0, insert_ds, extract_ds, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The FL1 field in a POWER SC form instruction.  */
-#define FL1 (21)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The FL2 field in a POWER SC form instruction.  */
-#define FL2 (22)
-  { 3, 2, NULL, NULL, 0 },
-
-  /* The FLM field in an XFL form instruction.  */
-#define FLM (23)
-  { 8, 17, NULL, NULL, 0 },
-
-  /* The FRA field in an X or A form instruction.  */
-#define FRA (24)
-#define FRA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRB field in an X or A form instruction.  */
-#define FRB (25)
-#define FRB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRC field in an A form instruction.  */
-#define FRC (26)
-#define FRC_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRS field in an X form instruction or the FRT field in a D, X
-     or A form instruction.  */
-#define FRS (27)
-#define FRT (FRS)
-  { 5, 21, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FXM field in an XFX instruction.  */
-#define FXM (28)
-#define FXM_MASK (0xff << 12)
-  { 8, 12, NULL, NULL, 0 },
-
-  /* The L field in a D or X form instruction.  */
-#define L (29)
-  { 1, 21, NULL, NULL, PPC_OPERAND_OPTIONAL },
-
-  /* The LEV field in a POWER SC form instruction.  */
-#define LEV (30)
-  { 7, 5, NULL, NULL, 0 },
-
-  /* The LI field in an I form instruction.  The lower two bits are
-     forced to zero.  */
-#define LI (31)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The LI field in an I form instruction when used as an absolute
-     address.  */
-#define LIA (32)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The MB field in an M form instruction.  */
-#define MB (33)
-#define MB_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, 0 },
-
-  /* The ME field in an M form instruction.  */
-#define ME (34)
-#define ME_MASK (0x1f << 1)
-  { 5, 1, NULL, NULL, 0 },
-
-  /* The MB and ME fields in an M form instruction expressed a single
-     operand which is a bitmask indicating which bits to select.  This
-     is a two operand form using PPC_OPERAND_NEXT.  See the
-     description in opcode/ppc.h for what this means.  */
-#define MBE (35)
-  { 5, 6, NULL, NULL, PPC_OPERAND_OPTIONAL | PPC_OPERAND_NEXT },
-  { 32, 0, insert_mbe, extract_mbe, 0 },
-
-  /* The MB or ME field in an MD or MDS form instruction.  The high
-     bit is wrapped to the low end.  */
-#define MB6 (37)
-#define ME6 (MB6)
-#define MB6_MASK (0x3f << 5)
-  { 6, 5, insert_mb6, extract_mb6, 0 },
-
-  /* The NB field in an X form instruction.  The value 32 is stored as
-     0.  */
-#define NB (38)
-  { 6, 11, insert_nb, extract_nb, 0 },
-
-  /* The NSI field in a D form instruction.  This is the same as the
-     SI field, only negated.  */
-#define NSI (39)
-  { 16, 0, insert_nsi, extract_nsi,
-      PPC_OPERAND_NEGATIVE | PPC_OPERAND_SIGNED },
-
-  /* The RA field in an D, DS, X, XO, M, or MDS form instruction.  */
-#define RA (40)
-#define RA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     load, which means that the RA field may not be zero and may not
-     equal the RT field.  */
-#define RAL (41)
-  { 5, 16, insert_ral, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in an lmw instruction, which has special value
-     restrictions.  */
-#define RAM (42)
-  { 5, 16, insert_ram, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     store or an updating floating point load, which means that the RA
-     field may not be zero.  */
-#define RAS (43)
-  { 5, 16, insert_ras, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X, XO, M, or MDS form instruction.  */
-#define RB (44)
-#define RB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X form instruction when it must be the same as
-     the RS field in the instruction.  This is used for extended
-     mnemonics like mr.  */
-#define RBS (45)
-  { 5, 1, insert_rbs, extract_rbs, PPC_OPERAND_FAKE },
-
-  /* The RS field in a D, DS, X, XFX, XS, M, MD or MDS form
-     instruction or the RT field in a D, DS, X, XFX or XO form
-     instruction.  */
-#define RS (46)
-#define RT (RS)
-#define RT_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The SH field in an X or M form instruction.  */
-#define SH (47)
-#define SH_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, 0 },
-
-  /* The SH field in an MD form instruction.  This is split.  */
-#define SH6 (48)
-#define SH6_MASK ((0x1f << 11) | (1 << 1))
-  { 6, 1, insert_sh6, extract_sh6, 0 },
-
-  /* The SI field in a D form instruction.  */
-#define SI (49)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED },
-
-  /* The SI field in a D form instruction when we accept a wide range
-     of positive values.  */
-#define SISIGNOPT (50)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED | PPC_OPERAND_SIGNOPT },
-
-  /* The SPR field in an XFX form instruction.  This is flipped--the
-     lower 5 bits are stored in the upper 5 and vice- versa.  */
-#define SPR (51)
-#define SPR_MASK (0x3ff << 11)
-  { 10, 11, insert_spr, extract_spr, 0 },
-
-  /* The BAT index number in an XFX form m[ft]ibat[lu] instruction.  */
-#define SPRBAT (52)
-#define SPRBAT_MASK (0x3 << 17)
-  { 2, 17, NULL, NULL, 0 },
-
-  /* The SPRG register number in an XFX form m[ft]sprg instruction.  */
-#define SPRG (53)
-#define SPRG_MASK (0x3 << 16)
-  { 2, 16, NULL, NULL, 0 },
-
-  /* The SR field in an X form instruction.  */
-#define SR (54)
-  { 4, 16, NULL, NULL, 0 },
-
-  /* The SV field in a POWER SC form instruction.  */
-#define SV (55)
-  { 14, 2, NULL, NULL, 0 },
-
-  /* The TBR field in an XFX form instruction.  This is like the SPR
-     field, but it is optional.  */
-#define TBR (56)
-  { 10, 11, insert_tbr, extract_tbr, PPC_OPERAND_OPTIONAL },
-
-  /* The TO field in a D or X form instruction.  */
-#define TO (57)
-#define TO_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, 0 },
-
-  /* The U field in an X form instruction.  */
-#define U (58)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The UI field in a D form instruction.  */
-#define UI (59)
-  { 16, 0, NULL, NULL, 0 },
-};
-
-/* The functions used to insert and extract complicated operands.  */
-
-/* The BA field in an XL form instruction when it must be the same as
-   the BT field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BT field into the BA field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bat(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 16);
-}
-
-static long
-extract_bat(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 16) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BB field in an XL form instruction when it must be the same as
-   the BA field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BA field into the BB field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bba(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 16) & 0x1f) << 11);
-}
-
-static long
-extract_bba(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 16) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BD field in a B form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bd(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_bd(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the - modifier is used.
-   This modifier means that the branch is not expected to be taken.
-   We must set the y bit of the BO field to 1 if the offset is
-   negative.  When extracting, we require that the y bit be 1 and that
-   the offset be positive, since if the y bit is 0 we just want to
-   print the normal form of the instruction.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdm(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) != 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdm(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) == 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the + modifier is used.
-   This is like BDM, above, except that the branch is expected to be
-   taken.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdp(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) == 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdp(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) != 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* Check for legal values of a BO field.  */
-
-static int
-valid_bo (long value)
-{
-  /* Certain encodings have bits that are required to be zero.  These
-     are (z must be zero, y may be anything):
-         001zy
-	 011zy
-	 1z00y
-	 1z01y
-	 1z1zz
-     */
-  switch (value & 0x14)
-    {
-    default:
-    case 0:
-      return 1;
-    case 0x4:
-      return (value & 0x2) == 0;
-    case 0x10:
-      return (value & 0x8) == 0;
-    case 0x14:
-      return value == 0x14;
-    }
-}
-
-/* The BO field in a B form instruction.  Warn about attempts to set
-   the field to an illegal value.  */
-
-static unsigned long
-insert_bo(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL
-      && ! valid_bo (value))
-    *errmsg = "invalid conditional option";
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_bo(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value;
-}
-
-/* The BO field in a B form instruction when the + or - modifier is
-   used.  This is like the BO field, but it must be even.  When
-   extracting it, we force it to be even.  */
-
-static unsigned long
-insert_boe(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL)
-    {
-      if (! valid_bo (value))
-	*errmsg = "invalid conditional option";
-      else if ((value & 1) != 0)
-	*errmsg = "attempt to set y bit when using + or - modifier";
-    }
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_boe(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value & 0x1e;
-}
-
-/* The DS field in a DS form instruction.  This is like D, but the
-   lower two bits are forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_ds(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_ds(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The LI field in an I form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_li(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0x3fffffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_li(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x2000000) != 0)
-    return (insn & 0x3fffffc) - 0x4000000;
-  else
-    return insn & 0x3fffffc;
-}
-
-/* The MB and ME fields in an M form instruction expressed as a single
-   operand which is itself a bitmask.  The extraction function always
-   marks it as invalid, since we never want to recognize an
-   instruction which uses a field of this type.  */
-
-static unsigned long
-insert_mbe(unsigned long insn, long value, const char **errmsg)
-{
-  unsigned long uval;
-  int mb, me;
-
-  uval = value;
-
-  if (uval == 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-      return insn;
-    }
-
-  me = 31;
-  while ((uval & 1) == 0)
-    {
-      uval >>= 1;
-      --me;
-    }
-
-  mb = me;
-  uval >>= 1;
-  while ((uval & 1) != 0)
-    {
-      uval >>= 1;
-      --mb;
-    }
-
-  if (uval != 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-    }
-
-  return insn | (mb << 6) | (me << 1);
-}
-
-static long
-extract_mbe(unsigned long insn, int *invalid)
-{
-  long ret;
-  int mb, me;
-  int i;
-
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-
-  ret = 0;
-  mb = (insn >> 6) & 0x1f;
-  me = (insn >> 1) & 0x1f;
-  for (i = mb; i < me; i++)
-    ret |= 1 << (31 - i);
-  return ret;
-}
-
-/* The MB or ME field in an MD or MDS form instruction.  The high bit
-   is wrapped to the low end.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_mb6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 6) | (value & 0x20);
-}
-
-/*ARGSUSED*/
-static long
-extract_mb6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 6) & 0x1f) | (insn & 0x20);
-}
-
-/* The NB field in an X form instruction.  The value 32 is stored as
-   0.  */
-
-static unsigned long
-insert_nb(unsigned long insn, long value, const char **errmsg)
-{
-  if (value < 0 || value > 32)
-    *errmsg = "value out of range";
-  if (value == 32)
-    value = 0;
-  return insn | ((value & 0x1f) << 11);
-}
-
-/*ARGSUSED*/
-static long
-extract_nb(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = (insn >> 11) & 0x1f;
-  if (ret == 0)
-    ret = 32;
-  return ret;
-}
-
-/* The NSI field in a D form instruction.  This is the same as the SI
-   field, only negated.  The extraction function always marks it as
-   invalid, since we never want to recognize an instruction which uses
-   a field of this type.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_nsi(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((- value) & 0xffff);
-}
-
-static long
-extract_nsi(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return - ((insn & 0xffff) - 0x10000);
-  else
-    return - (insn & 0xffff);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   load, which means that the RA field may not be zero and may not
-   equal the RT field.  */
-
-static unsigned long
-insert_ral(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0
-      || value == ((insn >> 21) & 0x1f))
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in an lmw instruction, which has special value
-   restrictions.  */
-
-static unsigned long
-insert_ram(unsigned long insn, long value, const char **errmsg)
-{
-  if (value >= ((insn >> 21) & 0x1f))
-    *errmsg = "index register in load range";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   store or an updating floating point load, which means that the RA
-   field may not be zero.  */
-
-static unsigned long
-insert_ras(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RB field in an X form instruction when it must be the same as
-   the RS field in the instruction.  This is used for extended
-   mnemonics like mr.  This operand is marked FAKE.  The insertion
-   function just copies the BT field into the BA field, and the
-   extraction function just checks that the fields are the same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_rbs(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 11);
-}
-
-static long
-extract_rbs(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The SH field in an MD form instruction.  This is split.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_sh6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 11) | ((value & 0x20) >> 4);
-}
-
-/*ARGSUSED*/
-static long
-extract_sh6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 11) & 0x1f) | ((insn << 4) & 0x20);
-}
-
-/* The SPR field in an XFX form instruction.  This is flipped--the
-   lower 5 bits are stored in the upper 5 and vice- versa.  */
-
-static unsigned long
-insert_spr(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_spr(unsigned long insn, int *invalid)
-{
-  return ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-}
-
-/* The TBR field in an XFX instruction.  This is just like SPR, but it
-   is optional.  When TBR is omitted, it must be inserted as 268 (the
-   magic number of the TB register).  These functions treat 0
-   (indicating an omitted optional operand) as 268.  This means that
-   ``mftb 4,0'' is not handled correctly.  This does not matter very
-   much, since the architecture manual does not define mftb as
-   accepting any values other than 268 or 269.  */
-
-#define TB (268)
-
-static unsigned long
-insert_tbr(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    value = TB;
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_tbr(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-  if (ret == TB)
-    ret = 0;
-  return ret;
-}
-
-/* Macros used to form opcodes.  */
-
-/* The main opcode.  */
-#define OP(x) (((x) & 0x3f) << 26)
-#define OP_MASK OP (0x3f)
-
-/* The main opcode combined with a trap code in the TO field of a D
-   form instruction.  Used for extended mnemonics for the trap
-   instructions.  */
-#define OPTO(x,to) (OP (x) | (((to) & 0x1f) << 21))
-#define OPTO_MASK (OP_MASK | TO_MASK)
-
-/* The main opcode combined with a comparison size bit in the L field
-   of a D form or X form instruction.  Used for extended mnemonics for
-   the comparison instructions.  */
-#define OPL(x,l) (OP (x) | (((l) & 1) << 21))
-#define OPL_MASK OPL (0x3f,1)
-
-/* An A form instruction.  */
-#define A(op, xop, rc) (OP (op) | (((xop) & 0x1f) << 1) | ((rc) & 1))
-#define A_MASK A (0x3f, 0x1f, 1)
-
-/* An A_MASK with the FRB field fixed.  */
-#define AFRB_MASK (A_MASK | FRB_MASK)
-
-/* An A_MASK with the FRC field fixed.  */
-#define AFRC_MASK (A_MASK | FRC_MASK)
-
-/* An A_MASK with the FRA and FRC fields fixed.  */
-#define AFRAFRC_MASK (A_MASK | FRA_MASK | FRC_MASK)
-
-/* A B form instruction.  */
-#define B(op, aa, lk) (OP (op) | (((aa) & 1) << 1) | ((lk) & 1))
-#define B_MASK B (0x3f, 1, 1)
-
-/* A B form instruction setting the BO field.  */
-#define BBO(op, bo, aa, lk) (B ((op), (aa), (lk)) | (((bo) & 0x1f) << 21))
-#define BBO_MASK BBO (0x3f, 0x1f, 1, 1)
-
-/* A BBO_MASK with the y bit of the BO field removed.  This permits
-   matching a conditional branch regardless of the setting of the y
-   bit.  */
-#define Y_MASK (1 << 21)
-#define BBOY_MASK (BBO_MASK &~ Y_MASK)
-
-/* A B form instruction setting the BO field and the condition bits of
-   the BI field.  */
-#define BBOCB(op, bo, cb, aa, lk) \
-  (BBO ((op), (bo), (aa), (lk)) | (((cb) & 0x3) << 16))
-#define BBOCB_MASK BBOCB (0x3f, 0x1f, 0x3, 1, 1)
-
-/* A BBOCB_MASK with the y bit of the BO field removed.  */
-#define BBOYCB_MASK (BBOCB_MASK &~ Y_MASK)
-
-/* A BBOYCB_MASK in which the BI field is fixed.  */
-#define BBOYBI_MASK (BBOYCB_MASK | BI_MASK)
-
-/* The main opcode mask with the RA field clear.  */
-#define DRA_MASK (OP_MASK | RA_MASK)
-
-/* A DS form instruction.  */
-#define DSO(op, xop) (OP (op) | ((xop) & 0x3))
-#define DS_MASK DSO (0x3f, 3)
-
-/* An M form instruction.  */
-#define M(op, rc) (OP (op) | ((rc) & 1))
-#define M_MASK M (0x3f, 1)
-
-/* An M form instruction with the ME field specified.  */
-#define MME(op, me, rc) (M ((op), (rc)) | (((me) & 0x1f) << 1))
-
-/* An M_MASK with the MB and ME fields fixed.  */
-#define MMBME_MASK (M_MASK | MB_MASK | ME_MASK)
-
-/* An M_MASK with the SH and ME fields fixed.  */
-#define MSHME_MASK (M_MASK | SH_MASK | ME_MASK)
-
-/* An MD form instruction.  */
-#define MD(op, xop, rc) (OP (op) | (((xop) & 0x7) << 2) | ((rc) & 1))
-#define MD_MASK MD (0x3f, 0x7, 1)
-
-/* An MD_MASK with the MB field fixed.  */
-#define MDMB_MASK (MD_MASK | MB6_MASK)
-
-/* An MD_MASK with the SH field fixed.  */
-#define MDSH_MASK (MD_MASK | SH6_MASK)
-
-/* An MDS form instruction.  */
-#define MDS(op, xop, rc) (OP (op) | (((xop) & 0xf) << 1) | ((rc) & 1))
-#define MDS_MASK MDS (0x3f, 0xf, 1)
-
-/* An MDS_MASK with the MB field fixed.  */
-#define MDSMB_MASK (MDS_MASK | MB6_MASK)
-
-/* An SC form instruction.  */
-#define SC(op, sa, lk) (OP (op) | (((sa) & 1) << 1) | ((lk) & 1))
-#define SC_MASK (OP_MASK | (0x3ff << 16) | (1 << 1) | 1)
-
-/* An X form instruction.  */
-#define X(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An X form instruction with the RC bit specified.  */
-#define XRC(op, xop, rc) (X ((op), (xop)) | ((rc) & 1))
-
-/* The mask for an X form instruction.  */
-#define X_MASK XRC (0x3f, 0x3ff, 1)
-
-/* An X_MASK with the RA field fixed.  */
-#define XRA_MASK (X_MASK | RA_MASK)
-
-/* An X_MASK with the RB field fixed.  */
-#define XRB_MASK (X_MASK | RB_MASK)
-
-/* An X_MASK with the RT field fixed.  */
-#define XRT_MASK (X_MASK | RT_MASK)
-
-/* An X_MASK with the RA and RB fields fixed.  */
-#define XRARB_MASK (X_MASK | RA_MASK | RB_MASK)
-
-/* An X_MASK with the RT and RA fields fixed.  */
-#define XRTRA_MASK (X_MASK | RT_MASK | RA_MASK)
-
-/* An X form comparison instruction.  */
-#define XCMPL(op, xop, l) (X ((op), (xop)) | (((l) & 1) << 21))
-
-/* The mask for an X form comparison instruction.  */
-#define XCMP_MASK (X_MASK | (1 << 22))
-
-/* The mask for an X form comparison instruction with the L field
-   fixed.  */
-#define XCMPL_MASK (XCMP_MASK | (1 << 21))
-
-/* An X form trap instruction with the TO field specified.  */
-#define XTO(op, xop, to) (X ((op), (xop)) | (((to) & 0x1f) << 21))
-#define XTO_MASK (X_MASK | TO_MASK)
-
-/* An XFL form instruction.  */
-#define XFL(op, xop, rc) (OP (op) | (((xop) & 0x3ff) << 1) | ((rc) & 1))
-#define XFL_MASK (XFL (0x3f, 0x3ff, 1) | (1 << 25) | (1 << 16))
-
-/* An XL form instruction with the LK field set to 0.  */
-#define XL(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An XL form instruction which uses the LK field.  */
-#define XLLK(op, xop, lk) (XL ((op), (xop)) | ((lk) & 1))
-
-/* The mask for an XL form instruction.  */
-#define XL_MASK XLLK (0x3f, 0x3ff, 1)
-
-/* An XL form instruction which explicitly sets the BO field.  */
-#define XLO(op, bo, xop, lk) \
-  (XLLK ((op), (xop), (lk)) | (((bo) & 0x1f) << 21))
-#define XLO_MASK (XL_MASK | BO_MASK)
-
-/* An XL form instruction which explicitly sets the y bit of the BO
-   field.  */
-#define XLYLK(op, xop, y, lk) (XLLK ((op), (xop), (lk)) | (((y) & 1) << 21))
-#define XLYLK_MASK (XL_MASK | Y_MASK)
-
-/* An XL form instruction which sets the BO field and the condition
-   bits of the BI field.  */
-#define XLOCB(op, bo, cb, xop, lk) \
-  (XLO ((op), (bo), (xop), (lk)) | (((cb) & 3) << 16))
-#define XLOCB_MASK XLOCB (0x3f, 0x1f, 0x3, 0x3ff, 1)
-
-/* An XL_MASK or XLYLK_MASK or XLOCB_MASK with the BB field fixed.  */
-#define XLBB_MASK (XL_MASK | BB_MASK)
-#define XLYBB_MASK (XLYLK_MASK | BB_MASK)
-#define XLBOCBBB_MASK (XLOCB_MASK | BB_MASK)
-
-/* An XL_MASK with the BO and BB fields fixed.  */
-#define XLBOBB_MASK (XL_MASK | BO_MASK | BB_MASK)
-
-/* An XL_MASK with the BO, BI and BB fields fixed.  */
-#define XLBOBIBB_MASK (XL_MASK | BO_MASK | BI_MASK | BB_MASK)
-
-/* An XO form instruction.  */
-#define XO(op, xop, oe, rc) \
-  (OP (op) | (((xop) & 0x1ff) << 1) | (((oe) & 1) << 10) | ((rc) & 1))
-#define XO_MASK XO (0x3f, 0x1ff, 1, 1)
-
-/* An XO_MASK with the RB field fixed.  */
-#define XORB_MASK (XO_MASK | RB_MASK)
-
-/* An XS form instruction.  */
-#define XS(op, xop, rc) (OP (op) | (((xop) & 0x1ff) << 2) | ((rc) & 1))
-#define XS_MASK XS (0x3f, 0x1ff, 1)
-
-/* A mask for the FXM version of an XFX form instruction.  */
-#define XFXFXM_MASK (X_MASK | (1 << 20) | (1 << 11))
-
-/* An XFX form instruction with the FXM field filled in.  */
-#define XFXM(op, xop, fxm) \
-  (X ((op), (xop)) | (((fxm) & 0xff) << 12))
-
-/* An XFX form instruction with the SPR field filled in.  */
-#define XSPR(op, xop, spr) \
-  (X ((op), (xop)) | (((spr) & 0x1f) << 16) | (((spr) & 0x3e0) << 6))
-#define XSPR_MASK (X_MASK | SPR_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRBAT field.  */
-#define XSPRBAT_MASK (XSPR_MASK &~ SPRBAT_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRG field.  */
-#define XSPRG_MASK (XSPR_MASK &~ SPRG_MASK)
-
-/* The BO encodings used in extended conditional branch mnemonics.  */
-#define BODNZF	(0x0)
-#define BODNZFP	(0x1)
-#define BODZF	(0x2)
-#define BODZFP	(0x3)
-#define BOF	(0x4)
-#define BOFP	(0x5)
-#define BODNZT	(0x8)
-#define BODNZTP	(0x9)
-#define BODZT	(0xa)
-#define BODZTP	(0xb)
-#define BOT	(0xc)
-#define BOTP	(0xd)
-#define BODNZ	(0x10)
-#define BODNZP	(0x11)
-#define BODZ	(0x12)
-#define BODZP	(0x13)
-#define BOU	(0x14)
-
-/* The BI condition bit encodings used in extended conditional branch
-   mnemonics.  */
-#define CBLT	(0)
-#define CBGT	(1)
-#define CBEQ	(2)
-#define CBSO	(3)
-
-/* The TO encodings used in extended trap mnemonics.  */
-#define TOLGT	(0x1)
-#define TOLLT	(0x2)
-#define TOEQ	(0x4)
-#define TOLGE	(0x5)
-#define TOLNL	(0x5)
-#define TOLLE	(0x6)
-#define TOLNG	(0x6)
-#define TOGT	(0x8)
-#define TOGE	(0xc)
-#define TONL	(0xc)
-#define TOLT	(0x10)
-#define TOLE	(0x14)
-#define TONG	(0x14)
-#define TONE	(0x18)
-#define TOU	(0x1f)
-
-/* Smaller names for the flags so each entry in the opcodes table will
-   fit on a single line.  */
-#undef PPC
-#define PPC PPC_OPCODE_PPC
-#define POWER PPC_OPCODE_POWER
-#define POWER2 PPC_OPCODE_POWER2
-#define B32 PPC_OPCODE_32
-#define B64 PPC_OPCODE_64
-#define M601 PPC_OPCODE_601
-
-/* The opcode table.
-
-   The format of the opcode table is:
-
-   NAME	     OPCODE	MASK		FLAGS		{ OPERANDS }
-
-   NAME is the name of the instruction.
-   OPCODE is the instruction opcode.
-   MASK is the opcode mask; this is used to tell the disassembler
-     which bits in the actual opcode must match OPCODE.
-   FLAGS are flags indicated what processors support the instruction.
-   OPERANDS is the list of operands.
-
-   The disassembler reads the table in order and prints the first
-   instruction which matches, so this table is sorted to put more
-   specific instructions before more general instructions.  It is also
-   sorted by major opcode.  */
-
-const struct powerpc_opcode powerpc_opcodes[] = {
-{ "tdlgti",  OPTO(2,TOLGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllti",  OPTO(2,TOLLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdeqi",   OPTO(2,TOEQ), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlgei",  OPTO(2,TOLGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlnli",  OPTO(2,TOLNL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllei",  OPTO(2,TOLLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlngi",  OPTO(2,TOLNG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgti",   OPTO(2,TOGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgei",   OPTO(2,TOGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnli",   OPTO(2,TONL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlti",   OPTO(2,TOLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlei",   OPTO(2,TOLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdngi",   OPTO(2,TONG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnei",   OPTO(2,TONE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdi",     OP(2),	OP_MASK,	PPC|B64,	{ TO, RA, SI } },
-
-{ "twlgti",  OPTO(3,TOLGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgti",   OPTO(3,TOLGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllti",  OPTO(3,TOLLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllti",   OPTO(3,TOLLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "tweqi",   OPTO(3,TOEQ), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "teqi",    OPTO(3,TOEQ), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlgei",  OPTO(3,TOLGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgei",   OPTO(3,TOLGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlnli",  OPTO(3,TOLNL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlnli",   OPTO(3,TOLNL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllei",  OPTO(3,TOLLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllei",   OPTO(3,TOLLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlngi",  OPTO(3,TOLNG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlngi",   OPTO(3,TOLNG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgti",   OPTO(3,TOGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgti",    OPTO(3,TOGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgei",   OPTO(3,TOGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgei",    OPTO(3,TOGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnli",   OPTO(3,TONL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnli",    OPTO(3,TONL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlti",   OPTO(3,TOLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlti",    OPTO(3,TOLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlei",   OPTO(3,TOLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlei",    OPTO(3,TOLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twngi",   OPTO(3,TONG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tngi",    OPTO(3,TONG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnei",   OPTO(3,TONE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnei",    OPTO(3,TONE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twi",     OP(3),	OP_MASK,	PPC,		{ TO, RA, SI } },
-{ "ti",      OP(3),	OP_MASK,	POWER,		{ TO, RA, SI } },
-
-{ "mulli",   OP(7),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "muli",    OP(7),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "subfic",  OP(8),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "sfi",     OP(8),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "dozi",    OP(9),	OP_MASK,	POWER|M601,	{ RT, RA, SI } },
-
-{ "cmplwi",  OPL(10,0),	OPL_MASK,	PPC,		{ OBF, RA, UI } },
-{ "cmpldi",  OPL(10,1), OPL_MASK,	PPC|B64,	{ OBF, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	PPC,		{ BF, L, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	POWER,		{ BF, RA, UI } },
-
-{ "cmpwi",   OPL(11,0),	OPL_MASK,	PPC,		{ OBF, RA, SI } },
-{ "cmpdi",   OPL(11,1),	OPL_MASK,	PPC|B64,	{ OBF, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	PPC,		{ BF, L, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	POWER,		{ BF, RA, SI } },
-
-{ "addic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai",	     OP(12),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "addic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai.",     OP(13),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "li",	     OP(14),	DRA_MASK,	PPC,		{ RT, SI } },
-{ "lil",     OP(14),	DRA_MASK,	POWER,		{ RT, SI } },
-{ "addi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "cal",     OP(14),	OP_MASK,	POWER,		{ RT, D, RA } },
-{ "subi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-{ "la",	     OP(14),	OP_MASK,	PPC,		{ RT, D, RA } },
-
-{ "lis",     OP(15),	DRA_MASK,	PPC,		{ RT, SISIGNOPT } },
-{ "liu",     OP(15),	DRA_MASK,	POWER,		{ RT, SISIGNOPT } },
-{ "addis",   OP(15),	OP_MASK,	PPC,		{ RT,RA,SISIGNOPT } },
-{ "cau",     OP(15),	OP_MASK,	POWER,		{ RT,RA,SISIGNOPT } },
-{ "subis",   OP(15),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "bdnz-",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnz+",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnz",    BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdn",     BBO(16,BODNZ,0,0), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnzl-",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnzl+",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnzl",   BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdnl",    BBO(16,BODNZ,0,1), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnza-",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnza+",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnza",   BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdna",    BBO(16,BODNZ,1,0), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdnzla-", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnzla+", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnzla",  BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdnla",   BBO(16,BODNZ,1,1), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdz-",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdz+",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdz",     BBO(16,BODZ,0,0), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdzl-",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdzl+",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdzl",    BBO(16,BODZ,0,1), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdza-",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdza+",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdza",    BBO(16,BODZ,1,0), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "bdzla-",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdzla+",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdzla",   BBO(16,BODZ,1,1), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "blt-",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blt+",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blt",     BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bltl-",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bltl+",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bltl",    BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blta-",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blta+",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blta",    BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bltla-",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bltla+",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bltla",   BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgt-",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgt+",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgt",     BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgtl-",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgtl+",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgtl",    BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgta-",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgta+",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgta",    BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgtla-",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgtla+",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgtla",   BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beq-",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beq+",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beq",     BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beql-",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beql+",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beql",    BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beqa-",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqa+",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqa",    BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beqla-",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqla+",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqla",   BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bso-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bso+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bso",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsol-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bsol+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bsol",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsoa-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsoa+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsoa",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bsola-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsola+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsola",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bun-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bun+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bun",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bunl-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bunl+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bunl",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "buna-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "buna+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "buna",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bunla-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bunla+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bunla",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bge-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bge+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bge",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgel-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgel+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgel",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgea-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgea+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgea",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgela-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgela+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgela",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnl-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnl+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnl",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnll-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnll+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnll",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnla-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnla+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnla",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnlla-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnlla+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnlla",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "ble-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "ble+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "ble",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blel-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blel+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blel",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blea-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blea+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blea",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "blela-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blela+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blela",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bng-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bng+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bng",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bngl-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bngl+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bngl",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnga-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnga+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnga",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bngla-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bngla+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bngla",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bne-",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bne+",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bne",     BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnel-",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnel+",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnel",    BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnea-",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnea+",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnea",    BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnela-",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnela+",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnela",   BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bns-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bns+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bns",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsl-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnsl+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnsl",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsa-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsa+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsa",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnsla-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsla+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsla",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnu-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnu+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnu",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnul-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnul+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnul",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnua-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnua+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnua",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bnula-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnula+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnula",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bdnzt-",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzt+",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzt",   BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnztl-", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnztl+", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnztl",  BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzta-", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzta+", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzta",  BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnztla-",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnztla+",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnztla", BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzf-",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzf+",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzf",   BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfl-", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzfl+", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzfl",  BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfa-", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfa+", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfa",  BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzfla-",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfla+",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfla", BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bt-",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bt+",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bt",	     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbt",     BBO(16,BOT,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "btl-",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "btl+",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "btl",     BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbtl",    BBO(16,BOT,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bta-",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bta+",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bta",     BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbta",    BBO(16,BOT,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "btla-",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "btla+",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "btla",    BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbtla",   BBO(16,BOT,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bf-",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bf+",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bf",	     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbf",     BBO(16,BOF,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfl-",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bfl+",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bfl",     BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbfl",    BBO(16,BOF,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfa-",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfa+",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfa",     BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfa",    BBO(16,BOF,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bfla-",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfla+",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfla",    BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfla",   BBO(16,BOF,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bdzt-",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzt+",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzt",    BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdztl-",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdztl+",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdztl",   BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzta-",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzta+",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzta",   BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdztla-", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdztla+", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdztla",  BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzf-",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzf+",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzf",    BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfl-",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzfl+",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzfl",   BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfa-",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfa+",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfa",   BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzfla-", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfla+", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfla",  BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bc-",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bc+",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bc",	     B(16,0,0),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bcl-",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bcl+",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bcl",     B(16,0,1),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bca-",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bca+",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bca",     B(16,1,0),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-{ "bcla-",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bcla+",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bcla",    B(16,1,1),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-
-{ "sc",      SC(17,1,0), 0xffffffff,	PPC,		{ 0 } },
-{ "svc",     SC(17,0,0), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svcl",    SC(17,0,1), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svca",    SC(17,1,0), SC_MASK,	POWER,		{ SV } },
-{ "svcla",   SC(17,1,1), SC_MASK,	POWER,		{ SV } },
-
-{ "b",	     B(18,0,0),	B_MASK,		PPC|POWER,	{ LI } },
-{ "bl",      B(18,0,1),	B_MASK,		PPC|POWER,	{ LI } },
-{ "ba",      B(18,1,0),	B_MASK,		PPC|POWER,	{ LIA } },
-{ "bla",     B(18,1,1),	B_MASK,		PPC|POWER,	{ LIA } },
-
-{ "mcrf",    XL(19,0),	XLBB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "blr",     XLO(19,BOU,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "br",      XLO(19,BOU,16,0), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "blrl",    XLO(19,BOU,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "brl",     XLO(19,BOU,16,1), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "bdnzlr",  XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr-", XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr+", XLO(19,BODNZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl", XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl-",XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl+",XLO(19,BODNZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr",   XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr-",  XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr+",  XLO(19,BODZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl",  XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl-", XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl+", XLO(19,BODZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bltlr",   XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr-",  XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr+",  XLOCB(19,BOTP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltr",    XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bltlrl",  XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl-", XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl+", XLOCB(19,BOTP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltrl",   XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlr",   XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr-",  XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr+",  XLOCB(19,BOTP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtr",    XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlrl",  XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl-", XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl+", XLOCB(19,BOTP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtrl",   XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlr",   XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr-",  XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr+",  XLOCB(19,BOTP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqr",    XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlrl",  XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl-", XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl+", XLOCB(19,BOTP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqrl",   XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsor",    XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsorl",   XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bunlr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bger",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgelrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgerl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlr",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlrl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bler",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blerl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngr",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngrl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelr",   XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr-",  XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr+",  XLOCB(19,BOFP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bner",    XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelrl",  XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl-", XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl+", XLOCB(19,BOFP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnerl",   XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsr",    XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsrl",   XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnulr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btlr",    XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr-",   XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr+",   XLO(19,BOTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtr",    XLO(19,BOT,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "btlrl",   XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl-",  XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl+",  XLO(19,BOTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtrl",   XLO(19,BOT,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflr",    XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr-",   XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr+",   XLO(19,BOFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfr",    XLO(19,BOF,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflrl",   XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl-",  XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl+",  XLO(19,BOFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfrl",   XLO(19,BOF,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bdnztlr", XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr-",XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr+",XLO(19,BODNZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl-",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl+",XLO(19,BODNZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr", XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr-",XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr+",XLO(19,BODNZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl-",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl+",XLO(19,BODNZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr",  XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr-", XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr+", XLO(19,BODZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl", XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl-",XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl+",XLO(19,BODZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr",  XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr-", XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr+", XLO(19,BODZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl", XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl-",XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl+",XLO(19,BODZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bclr",    XLLK(19,16,0), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclrl",   XLLK(19,16,1), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclr+",   XLYLK(19,16,1,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl+",  XLYLK(19,16,1,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclr-",   XLYLK(19,16,0,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl-",  XLYLK(19,16,0,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bcr",     XLLK(19,16,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bcrl",    XLLK(19,16,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "crnot",   XL(19,33), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "crnor",   XL(19,33),	XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "rfi",     XL(19,50),	0xffffffff,	PPC|POWER,	{ 0 } },
-{ "rfci",    XL(19,51),	0xffffffff,	PPC,		{ 0 } },
-
-{ "rfsvc",   XL(19,82),	0xffffffff,	POWER,		{ 0 } },
-
-{ "crandc",  XL(19,129), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "isync",   XL(19,150), 0xffffffff,	PPC,		{ 0 } },
-{ "ics",     XL(19,150), 0xffffffff,	POWER,		{ 0 } },
-
-{ "crclr",   XL(19,193), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "crxor",   XL(19,193), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crnand",  XL(19,225), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crand",   XL(19,257), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crset",   XL(19,289), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "creqv",   XL(19,289), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crorc",   XL(19,417), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crmove",  XL(19,449), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "cror",    XL(19,449), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "bctr",    XLO(19,BOU,528,0), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bctrl",   XLO(19,BOU,528,1), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bltctr",  XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr-", XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr+", XLOCB(19,BOTP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl", XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl-",XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl+",XLOCB(19,BOTP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr",  XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr-", XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr+", XLOCB(19,BOTP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl", XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl-",XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl+",XLOCB(19,BOTP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr",  XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr-", XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr+", XLOCB(19,BOTP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl", XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl-",XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl+",XLOCB(19,BOTP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr",  XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr-", XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr+", XLOCB(19,BOFP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl", XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl-",XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl+",XLOCB(19,BOFP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btctr",   XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr-",  XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr+",  XLO(19,BOTP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl",  XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl-", XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl+", XLO(19,BOTP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr",   XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr-",  XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr+",  XLO(19,BOFP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl",  XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl-", XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl+", XLO(19,BOFP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bcctr",   XLLK(19,528,0), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctr-",  XLYLK(19,528,0,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctr+",  XLYLK(19,528,1,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl",  XLLK(19,528,1), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctrl-", XLYLK(19,528,0,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl+", XLYLK(19,528,1,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcc",     XLLK(19,528,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bccl",    XLLK(19,528,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "rlwimi",  M(20,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi",   M(20,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlwimi.", M(20,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi.",  M(20,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rotlwi",  MME(21,31,0), MMBME_MASK,	PPC,		{ RA, RS, SH } },
-{ "clrlwi",  MME(21,31,0), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm",  M(21,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm",   M(21,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-{ "rotlwi.", MME(21,31,1), MMBME_MASK,	PPC,		{ RA,RS,SH } },
-{ "clrlwi.", MME(21,31,1), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm.", M(21,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm.",  M(21,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlmi",    M(22,0),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-{ "rlmi.",   M(22,1),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-
-{ "rotlw",   MME(23,31,0), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm",   M(23,0),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm",    M(23,0),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-{ "rotlw.",  MME(23,31,1), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm.",  M(23,1),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm.",   M(23,1),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-
-{ "nop",     OP(24),	0xffffffff,	PPC,		{ 0 } },
-{ "ori",     OP(24),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oril",    OP(24),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "oris",    OP(25),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oriu",    OP(25),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xori",    OP(26),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoril",   OP(26),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xoris",   OP(27),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoriu",   OP(27),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andi.",   OP(28),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andil.",  OP(28),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andis.",  OP(29),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andiu.",  OP(29),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "rotldi",  MD(30,0,0), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi",  MD(30,0,0), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl",  MD(30,0,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rotldi.", MD(30,0,1), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi.", MD(30,0,1), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl.", MD(30,0,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldicr",  MD(30,1,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-{ "rldicr.", MD(30,1,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-
-{ "rldic",   MD(30,2,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldic.",  MD(30,2,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldimi",  MD(30,3,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldimi.", MD(30,3,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rotld",   MDS(30,8,0), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl",   MDS(30,8,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-{ "rotld.",  MDS(30,8,1), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl.",  MDS(30,8,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-
-{ "rldcr",   MDS(30,9,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-{ "rldcr.",  MDS(30,9,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-
-{ "cmpw",    XCMPL(31,0,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpd",    XCMPL(31,0,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmp",     X(31,0),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmp",     X(31,0),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "twlgt",   XTO(31,4,TOLGT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlgt",    XTO(31,4,TOLGT), XTO_MASK, POWER,		{ RA, RB } },
-{ "twllt",   XTO(31,4,TOLLT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tllt",    XTO(31,4,TOLLT), XTO_MASK, POWER,		{ RA, RB } },
-{ "tweq",    XTO(31,4,TOEQ), XTO_MASK,	PPC,		{ RA, RB } },
-{ "teq",     XTO(31,4,TOEQ), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlge",   XTO(31,4,TOLGE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlge",    XTO(31,4,TOLGE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlnl",   XTO(31,4,TOLNL), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlnl",    XTO(31,4,TOLNL), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlle",   XTO(31,4,TOLLE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlle",    XTO(31,4,TOLLE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlng",   XTO(31,4,TOLNG), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlng",    XTO(31,4,TOLNG), XTO_MASK, POWER,		{ RA, RB } },
-{ "twgt",    XTO(31,4,TOGT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tgt",     XTO(31,4,TOGT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twge",    XTO(31,4,TOGE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tge",     XTO(31,4,TOGE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twnl",    XTO(31,4,TONL), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tnl",     XTO(31,4,TONL), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlt",    XTO(31,4,TOLT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tlt",     XTO(31,4,TOLT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twle",    XTO(31,4,TOLE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tle",     XTO(31,4,TOLE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twng",    XTO(31,4,TONG), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tng",     XTO(31,4,TONG), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twne",    XTO(31,4,TONE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tne",     XTO(31,4,TONE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "trap",    XTO(31,4,TOU), 0xffffffff,	PPC,		{ 0 } },
-{ "tw",      X(31,4),	X_MASK,		PPC,		{ TO, RA, RB } },
-{ "t",       X(31,4),	X_MASK,		POWER,		{ TO, RA, RB } },
-
-{ "subfc",   XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf",      XO(31,8,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc",    XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfc.",  XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf.",     XO(31,8,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc.",   XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco",  XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo",     XO(31,8,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco",   XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco.", XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo.",    XO(31,8,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco.",  XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "mulhdu",  XO(31,9,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhdu.", XO(31,9,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addc",    XO(31,10,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a",       XO(31,10,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addc.",   XO(31,10,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a.",      XO(31,10,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco",   XO(31,10,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao",      XO(31,10,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco.",  XO(31,10,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao.",     XO(31,10,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mulhwu",  XO(31,11,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhwu.", XO(31,11,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfcr",    X(31,19),	XRARB_MASK,	POWER|PPC,	{ RT } },
-
-{ "lwarx",   X(31,20),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "ldx",     X(31,21),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lwzx",    X(31,23),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lx",      X(31,23),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "slw",     XRC(31,24,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl",      XRC(31,24,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "slw.",    XRC(31,24,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl.",     XRC(31,24,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "cntlzw",  XRC(31,26,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz",   XRC(31,26,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "cntlzw.", XRC(31,26,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz.",  XRC(31,26,1), XRB_MASK, 	POWER,		{ RA, RS } },
-
-{ "sld",     XRC(31,27,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "sld.",    XRC(31,27,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "and",     XRC(31,28,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "and.",    XRC(31,28,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "maskg",   XRC(31,29,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskg.",  XRC(31,29,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "cmplw",   XCMPL(31,32,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpld",   XCMPL(31,32,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmpl",    X(31,32),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmpl",    X(31,32),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "subf",    XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub",     XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subf.",   XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub.",    XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo",   XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo",    XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo.",  XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo.",   XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "ldux",    X(31,53),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "dcbst",   X(31,54),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwzux",   X(31,55),	X_MASK,		PPC,		{ RT, RAL, RB } },
-{ "lux",     X(31,55),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "cntlzd",  XRC(31,58,0), XRB_MASK,	PPC|B64,	{ RA, RS } },
-{ "cntlzd.", XRC(31,58,1), XRB_MASK,	PPC|B64,	{ RA, RS } },
-
-{ "andc",    XRC(31,60,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "andc.",   XRC(31,60,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tdlgt",   XTO(31,68,TOLGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdllt",   XTO(31,68,TOLLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdeq",    XTO(31,68,TOEQ), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlge",   XTO(31,68,TOLGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlnl",   XTO(31,68,TOLNL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlle",   XTO(31,68,TOLLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlng",   XTO(31,68,TOLNG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdgt",    XTO(31,68,TOGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdge",    XTO(31,68,TOGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdnl",    XTO(31,68,TONL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlt",    XTO(31,68,TOLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdle",    XTO(31,68,TOLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdng",    XTO(31,68,TONG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdne",    XTO(31,68,TONE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "td",	     X(31,68),	X_MASK,		PPC|B64,	{ TO, RA, RB } },
-
-{ "mulhd",   XO(31,73,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhd.",  XO(31,73,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "mulhw",   XO(31,75,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhw.",  XO(31,75,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfmsr",   X(31,83),	XRARB_MASK,	PPC|POWER,	{ RT } },
-
-{ "ldarx",   X(31,84),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "dcbf",    X(31,86),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lbzx",    X(31,87),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "neg",     XO(31,104,0,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "neg.",    XO(31,104,0,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego",    XO(31,104,1,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego.",   XO(31,104,1,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-
-{ "mul",     XO(31,107,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mul.",    XO(31,107,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo",    XO(31,107,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo.",   XO(31,107,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "clf",     X(31,118), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "lbzux",   X(31,119),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "not",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "not.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "subfe",   XO(31,136,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe",     XO(31,136,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfe.",  XO(31,136,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe.",    XO(31,136,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo",  XO(31,136,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo",    XO(31,136,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo.", XO(31,136,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo.",   XO(31,136,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "adde",    XO(31,138,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae",      XO(31,138,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "adde.",   XO(31,138,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae.",     XO(31,138,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo",   XO(31,138,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo",     XO(31,138,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo.",  XO(31,138,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo.",    XO(31,138,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtcr",    XFXM(31,144,0xff), XFXFXM_MASK|FXM_MASK, PPC|POWER, { RS }},
-{ "mtcrf",   X(31,144),	XFXFXM_MASK,	PPC|POWER,	{ FXM, RS } },
-
-{ "mtmsr",   X(31,146),	XRARB_MASK,	PPC|POWER,	{ RS } },
-
-{ "stdx",    X(31,149), X_MASK,		PPC|B64,	{ RS, RA, RB } },
-
-{ "stwcx.",  XRC(31,150,1), X_MASK,	PPC,		{ RS, RA, RB } },
-
-{ "stwx",    X(31,151), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stx",     X(31,151), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "slq",     XRC(31,152,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "slq.",    XRC(31,152,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sle",     XRC(31,153,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sle.",    XRC(31,153,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stdux",   X(31,181),	X_MASK,		PPC|B64,	{ RS, RAS, RB } },
-
-{ "stwux",   X(31,183),	X_MASK,		PPC,		{ RS, RAS, RB } },
-{ "stux",    X(31,183),	X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "sliq",    XRC(31,184,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sliq.",   XRC(31,184,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "subfze",  XO(31,200,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze",    XO(31,200,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfze.", XO(31,200,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze.",   XO(31,200,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo", XO(31,200,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo",   XO(31,200,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo.",XO(31,200,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo.",  XO(31,200,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "addze",   XO(31,202,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze",     XO(31,202,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addze.",  XO(31,202,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze.",    XO(31,202,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo",  XO(31,202,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo",    XO(31,202,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo.", XO(31,202,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo.",   XO(31,202,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mtsr",    X(31,210),	XRB_MASK|(1<<20), PPC|POWER|B32, { SR, RS } },
-
-{ "stdcx.",  XRC(31,214,1), X_MASK,	PPC|B64,	{ RS, RA, RB } },
-
-{ "stbx",    X(31,215),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sllq",    XRC(31,216,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sllq.",   XRC(31,216,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sleq",    XRC(31,217,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sleq.",   XRC(31,217,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "subfme",  XO(31,232,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme",    XO(31,232,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfme.", XO(31,232,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme.",   XO(31,232,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo", XO(31,232,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo",   XO(31,232,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo.",XO(31,232,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo.",  XO(31,232,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mulld",   XO(31,233,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulld.",  XO(31,233,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo",  XO(31,233,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo.", XO(31,233,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addme",   XO(31,234,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame",     XO(31,234,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addme.",  XO(31,234,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame.",    XO(31,234,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo",  XO(31,234,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo",    XO(31,234,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo.", XO(31,234,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo.",   XO(31,234,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mullw",   XO(31,235,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls",    XO(31,235,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullw.",  XO(31,235,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls.",   XO(31,235,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo",  XO(31,235,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso",   XO(31,235,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo.", XO(31,235,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso.",  XO(31,235,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtsrin",  X(31,242),	XRA_MASK,	PPC|B32,	{ RS, RB } },
-{ "mtsri",   X(31,242),	XRA_MASK,	POWER|B32,	{ RS, RB } },
-
-{ "dcbtst",  X(31,246),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stbux",   X(31,247),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "slliq",   XRC(31,248,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "slliq.",  XRC(31,248,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "doz",     XO(31,264,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "doz.",    XO(31,264,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo",    XO(31,264,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo.",   XO(31,264,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "add",     XO(31,266,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax",     XO(31,266,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "add.",    XO(31,266,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax.",    XO(31,266,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo",    XO(31,266,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo",    XO(31,266,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo.",   XO(31,266,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo.",   XO(31,266,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "lscbx",   XRC(31,277,0), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "lscbx.",  XRC(31,277,1), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "dcbt",    X(31,278),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lhzx",    X(31,279),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "icbt",    X(31,262),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "eqv",     XRC(31,284,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "eqv.",    XRC(31,284,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tlbie",   X(31,306),	XRTRA_MASK,	PPC,		{ RB } },
-{ "tlbi",    X(31,306),	XRTRA_MASK,	POWER,		{ RB } },
-
-{ "eciwx",   X(31,310), X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "lhzux",   X(31,311),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "xor",     XRC(31,316,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "xor.",    XRC(31,316,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mfdcr",   X(31,323),	X_MASK,		PPC,		{ RT, SPR } },
-
-{ "div",     XO(31,331,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "div.",    XO(31,331,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo",    XO(31,331,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo.",   XO(31,331,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "mfmq",    XSPR(31,339,0), XSPR_MASK,	POWER|M601,	{ RT } },
-{ "mfxer",   XSPR(31,339,1), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfrtcu",  XSPR(31,339,4), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfrtcl",  XSPR(31,339,5), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,6), XSPR_MASK, POWER|M601,	{ RT } },
-{ "mflr",    XSPR(31,339,8), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfctr",   XSPR(31,339,9), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mftid",   XSPR(31,339,17), XSPR_MASK, POWER,		{ RT } },
-{ "mfdsisr", XSPR(31,339,18), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdar",   XSPR(31,339,19), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,22), XSPR_MASK, PPC,		{ RT } },
-{ "mfsdr0",  XSPR(31,339,24), XSPR_MASK, POWER,		{ RT } },
-{ "mfsdr1",  XSPR(31,339,25), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr0",  XSPR(31,339,26), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr1",  XSPR(31,339,27), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsprg",  XSPR(31,339,272), XSPRG_MASK, PPC,		{ RT, SPRG } },
-{ "mfasr",   XSPR(31,339,280), XSPR_MASK, PPC|B64,	{ RT } },
-{ "mfear",   XSPR(31,339,282), XSPR_MASK, PPC,		{ RT } },
-{ "mfpvr",   XSPR(31,339,287), XSPR_MASK, PPC,		{ RT } },
-{ "mfibatu", XSPR(31,339,528), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfibatl", XSPR(31,339,529), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatu", XSPR(31,339,536), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatl", XSPR(31,339,537), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfspr",   X(31,339),	X_MASK,		PPC|POWER,	{ RT, SPR } },
-
-{ "lwax",    X(31,341),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lhax",    X(31,343),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "dccci",   X(31,454),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "abs",     XO(31,360,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abs.",    XO(31,360,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso",    XO(31,360,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso.",   XO(31,360,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divs",    XO(31,363,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divs.",   XO(31,363,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso",   XO(31,363,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso.",  XO(31,363,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "tlbia",   X(31,370),	0xffffffff,	PPC,		{ 0 } },
-
-{ "mftbu",   XSPR(31,371,269), XSPR_MASK, PPC,		{ RT } },
-{ "mftb",    X(31,371),	X_MASK,		PPC,		{ RT, TBR } },
-
-{ "lwaux",   X(31,373),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "lhaux",   X(31,375),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "sthx",    X(31,407),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "lfqx",    X(31,791),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "lfqux",   X(31,823),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "stfqx",   X(31,919),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "stfqux",  X(31,951),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "orc",     XRC(31,412,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "orc.",    XRC(31,412,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "sradi",   XS(31,413,0), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "sradi.",  XS(31,413,1), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-
-{ "slbie",   X(31,434),	XRTRA_MASK,	PPC|B64,	{ RB } },
-
-{ "ecowx",   X(31,438),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "sthux",   X(31,439),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "mr",	     XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or",      XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "mr.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mtdcr",   X(31,451),	X_MASK,		PPC,		{ SPR, RS } },
-
-{ "divdu",   XO(31,457,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdu.",  XO(31,457,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo",  XO(31,457,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo.", XO(31,457,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divwu",   XO(31,459,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwu.",  XO(31,459,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo",  XO(31,459,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo.", XO(31,459,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mtmq",    XSPR(31,467,0), XSPR_MASK,	POWER|M601,	{ RS } },
-{ "mtxer",   XSPR(31,467,1), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtlr",    XSPR(31,467,8), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtctr",   XSPR(31,467,9), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mttid",   XSPR(31,467,17), XSPR_MASK, POWER,		{ RS } },
-{ "mtdsisr", XSPR(31,467,18), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdar",   XSPR(31,467,19), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcu",  XSPR(31,467,20), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcl",  XSPR(31,467,21), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdec",   XSPR(31,467,22), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsdr0",  XSPR(31,467,24), XSPR_MASK, POWER,		{ RS } },
-{ "mtsdr1",  XSPR(31,467,25), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr0",  XSPR(31,467,26), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr1",  XSPR(31,467,27), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsprg",  XSPR(31,467,272), XSPRG_MASK, PPC,		{ SPRG, RS } },
-{ "mtasr",   XSPR(31,467,280), XSPR_MASK, PPC|B64,	{ RS } },
-{ "mtear",   XSPR(31,467,282), XSPR_MASK, PPC,		{ RS } },
-{ "mttbl",   XSPR(31,467,284), XSPR_MASK, PPC,		{ RS } },
-{ "mttbu",   XSPR(31,467,285), XSPR_MASK, PPC,		{ RS } },
-{ "mtibatu", XSPR(31,467,528), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtibatl", XSPR(31,467,529), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatu", XSPR(31,467,536), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatl", XSPR(31,467,537), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtspr",   X(31,467),	X_MASK,		PPC|POWER,	{ SPR, RS } },
-
-{ "dcbi",    X(31,470),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "nand",    XRC(31,476,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "nand.",   XRC(31,476,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "nabs",    XO(31,488,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabs.",   XO(31,488,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso",   XO(31,488,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso.",  XO(31,488,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divd",    XO(31,489,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divd.",   XO(31,489,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo",   XO(31,489,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo.",  XO(31,489,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divw",    XO(31,491,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divw.",   XO(31,491,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo",   XO(31,491,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo.",  XO(31,491,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "slbia",   X(31,498),	0xffffffff,	PPC|B64,	{ 0 } },
-
-{ "cli",     X(31,502), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "mcrxr",   X(31,512),	XRARB_MASK|(3<<21), PPC|POWER,	{ BF } },
-
-{ "clcs",    X(31,531), XRB_MASK,	POWER|M601,	{ RT, RA } },
-
-{ "lswx",    X(31,533),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lsx",     X(31,533),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lwbrx",   X(31,534),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lbrx",    X(31,534),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lfsx",    X(31,535),	X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "srw",     XRC(31,536,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr",      XRC(31,536,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "srw.",    XRC(31,536,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr.",     XRC(31,536,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "rrib",    XRC(31,537,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "rrib.",   XRC(31,537,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srd",     XRC(31,539,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srd.",    XRC(31,539,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "maskir",  XRC(31,541,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskir.", XRC(31,541,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "tlbsync", X(31,566),	0xffffffff,	PPC,		{ 0 } },
-
-{ "lfsux",   X(31,567),	X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsr",    X(31,595),	XRB_MASK|(1<<20), PPC|POWER|B32, { RT, SR } },
-
-{ "lswi",    X(31,597),	X_MASK,		PPC,		{ RT, RA, NB } },
-{ "lsi",     X(31,597),	X_MASK,		POWER,		{ RT, RA, NB } },
-
-{ "sync",    X(31,598), 0xffffffff,	PPC,		{ 0 } },
-{ "dcs",     X(31,598), 0xffffffff,	POWER,		{ 0 } },
-
-{ "lfdx",    X(31,599), X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "mfsri",   X(31,627), X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "dclst",   X(31,630), XRB_MASK,	POWER,		{ RS, RA } },
-
-{ "lfdux",   X(31,631), X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsrin",  X(31,659), XRA_MASK,	PPC|B32,	{ RT, RB } },
-
-{ "stswx",   X(31,661), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stsx",    X(31,661), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stwbrx",  X(31,662), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stbrx",   X(31,662), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stfsx",   X(31,663), X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srq",     XRC(31,664,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srq.",    XRC(31,664,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sre",     XRC(31,665,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sre.",    XRC(31,665,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfsux",  X(31,695),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "sriq",    XRC(31,696,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sriq.",   XRC(31,696,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "stswi",   X(31,725),	X_MASK,		PPC,		{ RS, RA, NB } },
-{ "stsi",    X(31,725),	X_MASK,		POWER,		{ RS, RA, NB } },
-
-{ "stfdx",   X(31,727),	X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srlq",    XRC(31,728,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srlq.",   XRC(31,728,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sreq",    XRC(31,729,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sreq.",   XRC(31,729,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfdux",  X(31,759),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "srliq",   XRC(31,760,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "srliq.",  XRC(31,760,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "lhbrx",   X(31,790),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "sraw",    XRC(31,792,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra",     XRC(31,792,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "sraw.",   XRC(31,792,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra.",    XRC(31,792,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "srad",    XRC(31,794,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srad.",   XRC(31,794,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "rac",     X(31,818),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "srawi",   XRC(31,824,0), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai",    XRC(31,824,0), X_MASK,	POWER,		{ RA, RS, SH } },
-{ "srawi.",  XRC(31,824,1), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai.",   XRC(31,824,1), X_MASK,	POWER,		{ RA, RS, SH } },
-
-{ "eieio",   X(31,854),	0xffffffff,	PPC,		{ 0 } },
-
-{ "sthbrx",  X(31,918),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sraq",    XRC(31,920,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sraq.",   XRC(31,920,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srea",    XRC(31,921,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srea.",   XRC(31,921,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "extsh",   XRC(31,922,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts",    XRC(31,922,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "extsh.",  XRC(31,922,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts.",   XRC(31,922,1), XRB_MASK,	POWER,		{ RA, RS } },
-
-{ "sraiq",   XRC(31,952,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sraiq.",  XRC(31,952,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "extsb",   XRC(31,954,0), XRB_MASK,	PPC,		{ RA, RS} },
-{ "extsb.",  XRC(31,954,1), XRB_MASK,	PPC,		{ RA, RS} },
-
-{ "iccci",   X(31,966),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "icbi",    X(31,982),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stfiwx",  X(31,983),	X_MASK,		PPC,		{ FRS, RA, RB } },
-
-{ "extsw",   XRC(31,986,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "extsw.",  XRC(31,986,1), XRB_MASK,	PPC,		{ RA, RS } },
-
-{ "dcbz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-{ "dclz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwz",     OP(32),	OP_MASK,	PPC,		{ RT, D, RA } },
-{ "l",	     OP(32),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lwzu",    OP(33),	OP_MASK,	PPC,		{ RT, D, RAL } },
-{ "lu",      OP(33),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lbz",     OP(34),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lbzu",    OP(35),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "stw",     OP(36),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "st",      OP(36),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stwu",    OP(37),	OP_MASK,	PPC,		{ RS, D, RAS } },
-{ "stu",     OP(37),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stb",     OP(38),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "stbu",    OP(39),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lhz",     OP(40),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhzu",    OP(41),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "lha",     OP(42),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhau",    OP(43),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "sth",     OP(44),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "sthu",    OP(45),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lmw",     OP(46),	OP_MASK,	PPC,		{ RT, D, RAM } },
-{ "lm",      OP(46),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "stmw",    OP(47),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "stm",     OP(47),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "lfs",     OP(48),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfsu",    OP(49),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "lfd",     OP(50),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfdu",    OP(51),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "stfs",    OP(52),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfsu",   OP(53),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "stfd",    OP(54),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfdu",   OP(55),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "lfq",     OP(56),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "lfqu",    OP(57),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "ld",      DSO(58,0),	DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "ldu",     DSO(58,1), DS_MASK,	PPC|B64,	{ RT, DS, RAL } },
-
-{ "lwa",     DSO(58,2), DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "fdivs",   A(59,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fdivs.",  A(59,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsubs",   A(59,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fsubs.",  A(59,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fadds",   A(59,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fadds.",  A(59,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsqrts",  A(59,22,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fsqrts.", A(59,22,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fres",    A(59,24,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fres.",   A(59,24,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmuls",   A(59,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fmuls.",  A(59,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-
-{ "fmsubs",  A(59,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmsubs.", A(59,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadds",  A(59,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmadds.", A(59,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsubs", A(59,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsubs.",A(59,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadds", A(59,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadds.",A(59,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "stfq",    OP(60),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "stfqu",   OP(61),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "std",     DSO(62,0),	DS_MASK,	PPC|B64,	{ RS, DS, RA } },
-
-{ "stdu",    DSO(62,1),	DS_MASK,	PPC|B64,	{ RS, DS, RAS } },
-
-{ "fcmpu",   X(63,0),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "frsp",    XRC(63,12,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "frsp.",   XRC(63,12,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fctiw",   XRC(63,14,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir",    XRC(63,14,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiw.",  XRC(63,14,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir.",   XRC(63,14,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fctiwz",  XRC(63,15,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz",   XRC(63,15,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiwz.", XRC(63,15,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz.",  XRC(63,15,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fdiv",    A(63,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd",      A(63,18,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fdiv.",   A(63,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd.",     A(63,18,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsub",    A(63,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs",      A(63,20,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fsub.",   A(63,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs.",     A(63,20,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fadd",    A(63,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa",      A(63,21,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fadd.",   A(63,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa.",     A(63,21,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsqrt",   A(63,22,0), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-{ "fsqrt.",  A(63,22,1), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-
-{ "fsel",    A(63,23,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fsel.",   A(63,23,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmul",    A(63,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm",      A(63,25,0), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-{ "fmul.",   A(63,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm.",     A(63,25,1), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-
-{ "frsqrte", A(63,26,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "frsqrte.",A(63,26,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmsub",   A(63,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms",     A(63,28,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmsub.",  A(63,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms.",    A(63,28,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadd",   A(63,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma",     A(63,29,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmadd.",  A(63,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma.",    A(63,29,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsub",  A(63,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms",    A(63,30,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsub.", A(63,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms.",   A(63,30,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadd",  A(63,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma",    A(63,31,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadd.", A(63,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma.",   A(63,31,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fcmpo",   X(63,30),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "mtfsb1",  XRC(63,38,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb1.", XRC(63,38,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fneg",    XRC(63,40,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fneg.",   XRC(63,40,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mcrfs",   X(63,64),	XRB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "mtfsb0",  XRC(63,70,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb0.", XRC(63,70,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fmr",     XRC(63,72,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fmr.",    XRC(63,72,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mtfsfi",  XRC(63,134,0), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-{ "mtfsfi.", XRC(63,134,1), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-
-{ "fnabs",   XRC(63,136,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fnabs.",  XRC(63,136,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fabs",    XRC(63,264,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fabs.",   XRC(63,264,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mffs",    XRC(63,583,0), XRARB_MASK,	PPC|POWER,	{ FRT } },
-{ "mffs.",   XRC(63,583,1), XRARB_MASK,	PPC|POWER,	{ FRT } },
-
-{ "mtfsf",   XFL(63,711,0), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-{ "mtfsf.",  XFL(63,711,1), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-
-{ "fctid",   XRC(63,814,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctid.",  XRC(63,814,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fctidz",  XRC(63,815,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctidz.", XRC(63,815,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fcfid",   XRC(63,846,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fcfid.",  XRC(63,846,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-};
-
-const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
-
-/* The macro table.  This is only used by the assembler.  */
-
-const struct powerpc_macro powerpc_macros[] = {
-{ "extldi",  4,   PPC|B64,	"rldicr %0,%1,%3,(%2)-1" },
-{ "extldi.", 4,   PPC|B64,	"rldicr. %0,%1,%3,(%2)-1" },
-{ "extrdi",  4,   PPC|B64,	"rldicl %0,%1,(%2)+(%3),64-(%2)" },
-{ "extrdi.", 4,   PPC|B64,	"rldicl. %0,%1,(%2)+(%3),64-(%2)" },
-{ "insrdi",  4,   PPC|B64,	"rldimi %0,%1,64-((%2)+(%3)),%3" },
-{ "insrdi.", 4,   PPC|B64,	"rldimi. %0,%1,64-((%2)+(%3)),%3" },
-{ "rotrdi",  3,   PPC|B64,	"rldicl %0,%1,64-(%2),0" },
-{ "rotrdi.", 3,   PPC|B64,	"rldicl. %0,%1,64-(%2),0" },
-{ "sldi",    3,   PPC|B64,	"rldicr %0,%1,%2,63-(%2)" },
-{ "sldi.",   3,   PPC|B64,	"rldicr. %0,%1,%2,63-(%2)" },
-{ "srdi",    3,   PPC|B64,	"rldicl %0,%1,64-(%2),%2" },
-{ "srdi.",   3,   PPC|B64,	"rldicl. %0,%1,64-(%2),%2" },
-{ "clrrdi",  3,   PPC|B64,	"rldicr %0,%1,0,63-(%2)" },
-{ "clrrdi.", 3,   PPC|B64,	"rldicr. %0,%1,0,63-(%2)" },
-{ "clrlsldi",4,   PPC|B64,	"rldic %0,%1,%3,(%2)-(%3)" },
-{ "clrlsldi.",4,  PPC|B64,	"rldic. %0,%1,%3,(%2)-(%3)" },
-
-{ "extlwi",  4,   PPC,		"rlwinm %0,%1,%3,0,(%2)-1" },
-{ "extlwi.", 4,   PPC,		"rlwinm. %0,%1,%3,0,(%2)-1" },
-{ "extrwi",  4,   PPC,		"rlwinm %0,%1,(%2)+(%3),32-(%2),31" },
-{ "extrwi.", 4,   PPC,		"rlwinm. %0,%1,(%2)+(%3),32-(%2),31" },
-{ "inslwi",  4,   PPC,		"rlwimi %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "inslwi.", 4,   PPC,		"rlwimi. %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "insrwi",  4,   PPC,		"rlwimi %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1" },
-{ "insrwi.", 4,   PPC,		"rlwimi. %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1"},
-{ "rotrwi",  3,   PPC,		"rlwinm %0,%1,32-(%2),0,31" },
-{ "rotrwi.", 3,   PPC,		"rlwinm. %0,%1,32-(%2),0,31" },
-{ "slwi",    3,   PPC,		"rlwinm %0,%1,%2,0,31-(%2)" },
-{ "sli",     3,   POWER,	"rlinm %0,%1,%2,0,31-(%2)" },
-{ "slwi.",   3,   PPC,		"rlwinm. %0,%1,%2,0,31-(%2)" },
-{ "sli.",    3,   POWER,	"rlinm. %0,%1,%2,0,31-(%2)" },
-{ "srwi",    3,   PPC,		"rlwinm %0,%1,32-(%2),%2,31" },
-{ "sri",     3,   POWER,	"rlinm %0,%1,32-(%2),%2,31" },
-{ "srwi.",   3,   PPC,		"rlwinm. %0,%1,32-(%2),%2,31" },
-{ "sri.",    3,   POWER,	"rlinm. %0,%1,32-(%2),%2,31" },
-{ "clrrwi",  3,   PPC,		"rlwinm %0,%1,0,0,31-(%2)" },
-{ "clrrwi.", 3,   PPC,		"rlwinm. %0,%1,0,0,31-(%2)" },
-{ "clrlslwi",4,   PPC,		"rlwinm %0,%1,%3,(%2)-(%3),31-(%3)" },
-{ "clrlslwi.",4,  PPC,		"rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" },
-
-};
-
-const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/ppc/xmon/ppc.h b/arch/ppc/xmon/ppc.h
deleted file mode 100644
index 2345ecba1fe9..000000000000
--- a/arch/ppc/xmon/ppc.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* ppc.h -- Header file for PowerPC opcode table
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-1, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef PPC_H
-#define PPC_H
-
-/* The opcode table is an array of struct powerpc_opcode.  */
-
-struct powerpc_opcode
-{
-  /* The opcode name.  */
-  const char *name;
-
-  /* The opcode itself.  Those bits which will be filled in with
-     operands are zeroes.  */
-  unsigned long opcode;
-
-  /* The opcode mask.  This is used by the disassembler.  This is a
-     mask containing ones indicating those bits which must match the
-     opcode field, and zeroes indicating those bits which need not
-     match (and are presumably filled in by operands).  */
-  unsigned long mask;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The defined values
-     are listed below.  */
-  unsigned long flags;
-
-  /* An array of operand codes.  Each code is an index into the
-     operand table.  They appear in the order which the operands must
-     appear in assembly code, and are terminated by a zero.  */
-  unsigned char operands[8];
-};
-
-/* The table itself is sorted by major opcode number, and is otherwise
-   in the order in which the disassembler should consider
-   instructions.  */
-extern const struct powerpc_opcode powerpc_opcodes[];
-extern const int powerpc_num_opcodes;
-
-/* Values defined for the flags field of a struct powerpc_opcode.  */
-
-/* Opcode is defined for the PowerPC architecture.  */
-#define PPC_OPCODE_PPC (01)
-
-/* Opcode is defined for the POWER (RS/6000) architecture.  */
-#define PPC_OPCODE_POWER (02)
-
-/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
-#define PPC_OPCODE_POWER2 (04)
-
-/* Opcode is only defined on 32 bit architectures.  */
-#define PPC_OPCODE_32 (010)
-
-/* Opcode is only defined on 64 bit architectures.  */
-#define PPC_OPCODE_64 (020)
-
-/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
-   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
-   but it also supports many additional POWER instructions.  */
-#define PPC_OPCODE_601 (040)
-
-/* A macro to extract the major opcode from an instruction.  */
-#define PPC_OP(i) (((i) >> 26) & 0x3f)
-
-/* The operands table is an array of struct powerpc_operand.  */
-
-struct powerpc_operand
-{
-  /* The number of bits in the operand.  */
-  int bits;
-
-  /* How far the operand is left shifted in the instruction.  */
-  int shift;
-
-  /* Insertion function.  This is used by the assembler.  To insert an
-     operand value into an instruction, check this field.
-
-     If it is NULL, execute
-         i |= (op & ((1 << o->bits) - 1)) << o->shift;
-     (i is the instruction which we are filling in, o is a pointer to
-     this structure, and op is the opcode value; this assumes twos
-     complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction and the operand value.  It will return the new value
-     of the instruction.  If the ERRMSG argument is not NULL, then if
-     the operand value is illegal, *ERRMSG will be set to a warning
-     string (the operand will be inserted in any case).  If the
-     operand value is legal, *ERRMSG will be unchanged (most operands
-     can accept any value).  */
-  unsigned long (*insert) PARAMS ((unsigned long instruction, long op,
-				   const char **errmsg));
-
-  /* Extraction function.  This is used by the disassembler.  To
-     extract this operand type from an instruction, check this field.
-
-     If it is NULL, compute
-         op = ((i) >> o->shift) & ((1 << o->bits) - 1);
-	 if ((o->flags & PPC_OPERAND_SIGNED) != 0
-	     && (op & (1 << (o->bits - 1))) != 0)
-	   op -= 1 << o->bits;
-     (i is the instruction, o is a pointer to this structure, and op
-     is the result; this assumes twos complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction value.  It will return the value of the operand.  If
-     the INVALID argument is not NULL, *INVALID will be set to
-     non-zero if this operand type can not actually be extracted from
-     this operand (i.e., the instruction does not match).  If the
-     operand is valid, *INVALID will not be changed.  */
-  long (*extract) PARAMS ((unsigned long instruction, int *invalid));
-
-  /* One bit syntax flags.  */
-  unsigned long flags;
-};
-
-/* Elements in the table are retrieved by indexing with values from
-   the operands field of the powerpc_opcodes table.  */
-
-extern const struct powerpc_operand powerpc_operands[];
-
-/* Values defined for the flags field of a struct powerpc_operand.  */
-
-/* This operand takes signed values.  */
-#define PPC_OPERAND_SIGNED (01)
-
-/* This operand takes signed values, but also accepts a full positive
-   range of values when running in 32 bit mode.  That is, if bits is
-   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
-   this flag is ignored.  */
-#define PPC_OPERAND_SIGNOPT (02)
-
-/* This operand does not actually exist in the assembler input.  This
-   is used to support extended mnemonics such as mr, for which two
-   operands fields are identical.  The assembler should call the
-   insert function with any op value.  The disassembler should call
-   the extract function, ignore the return value, and check the value
-   placed in the valid argument.  */
-#define PPC_OPERAND_FAKE (04)
-
-/* The next operand should be wrapped in parentheses rather than
-   separated from this one by a comma.  This is used for the load and
-   store instructions which want their operands to look like
-       reg,displacement(reg)
-   */
-#define PPC_OPERAND_PARENS (010)
-
-/* This operand may use the symbolic names for the CR fields, which
-   are
-       lt  0	gt  1	eq  2	so  3	un  3
-       cr0 0	cr1 1	cr2 2	cr3 3
-       cr4 4	cr5 5	cr6 6	cr7 7
-   These may be combined arithmetically, as in cr2*4+gt.  These are
-   only supported on the PowerPC, not the POWER.  */
-#define PPC_OPERAND_CR (020)
-
-/* This operand names a register.  The disassembler uses this to print
-   register names with a leading 'r'.  */
-#define PPC_OPERAND_GPR (040)
-
-/* This operand names a floating point register.  The disassembler
-   prints these with a leading 'f'.  */
-#define PPC_OPERAND_FPR (0100)
-
-/* This operand is a relative branch displacement.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_RELATIVE (0200)
-
-/* This operand is an absolute branch address.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_ABSOLUTE (0400)
-
-/* This operand is optional, and is zero if omitted.  This is used for
-   the optional BF and L fields in the comparison instructions.  The
-   assembler must count the number of operands remaining on the line,
-   and the number of operands remaining for the opcode, and decide
-   whether this operand is present or not.  The disassembler should
-   print this operand out only if it is not zero.  */
-#define PPC_OPERAND_OPTIONAL (01000)
-
-/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
-   is omitted, then for the next operand use this operand value plus
-   1, ignoring the next operand field for the opcode.  This wretched
-   hack is needed because the Power rotate instructions can take
-   either 4 or 5 operands.  The disassembler should print this operand
-   out regardless of the PPC_OPERAND_OPTIONAL field.  */
-#define PPC_OPERAND_NEXT (02000)
-
-/* This operand should be regarded as a negative number for the
-   purposes of overflow checking (i.e., the normal most negative
-   number is disallowed and one more than the normal most positive
-   number is allowed).  This flag will only be set for a signed
-   operand.  */
-#define PPC_OPERAND_NEGATIVE (04000)
-
-/* The POWER and PowerPC assemblers use a few macros.  We keep them
-   with the operands table for simplicity.  The macro table is an
-   array of struct powerpc_macro.  */
-
-struct powerpc_macro
-{
-  /* The macro name.  */
-  const char *name;
-
-  /* The number of operands the macro takes.  */
-  unsigned int operands;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The values are the
-     same as those for the struct powerpc_opcode flags field.  */
-  unsigned long flags;
-
-  /* A format string to turn the macro into a normal instruction.
-     Each %N in the string is replaced with operand number N (zero
-     based).  */
-  const char *format;
-};
-
-extern const struct powerpc_macro powerpc_macros[];
-extern const int powerpc_num_macros;
-
-#endif /* PPC_H */
diff --git a/arch/ppc/xmon/privinst.h b/arch/ppc/xmon/privinst.h
deleted file mode 100644
index c492a35687bd..000000000000
--- a/arch/ppc/xmon/privinst.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#define GETREG(reg)		\
-    static inline int get_ ## reg (void)	\
-	{ int ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; }
-
-#define SETREG(reg)		\
-    static inline void set_ ## reg (int val)	\
-	{ asm volatile ("mt" #reg " %0" : : "r" (val)); }
-
-GETREG(msr)
-SETREG(msr)
-GETREG(cr)
-
-#define GSETSPR(n, name)	\
-    static inline int get_ ## name (void) \
-	{ int ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \
-    static inline void set_ ## name (int val) \
-	{ asm volatile ("mtspr " #n ",%0" : : "r" (val)); }
-
-GSETSPR(0, mq)
-GSETSPR(1, xer)
-GSETSPR(4, rtcu)
-GSETSPR(5, rtcl)
-GSETSPR(8, lr)
-GSETSPR(9, ctr)
-GSETSPR(18, dsisr)
-GSETSPR(19, dar)
-GSETSPR(22, dec)
-GSETSPR(25, sdr1)
-GSETSPR(26, srr0)
-GSETSPR(27, srr1)
-GSETSPR(272, sprg0)
-GSETSPR(273, sprg1)
-GSETSPR(274, sprg2)
-GSETSPR(275, sprg3)
-GSETSPR(282, ear)
-GSETSPR(287, pvr)
-#ifndef CONFIG_8xx
-GSETSPR(528, bat0u)
-GSETSPR(529, bat0l)
-GSETSPR(530, bat1u)
-GSETSPR(531, bat1l)
-GSETSPR(532, bat2u)
-GSETSPR(533, bat2l)
-GSETSPR(534, bat3u)
-GSETSPR(535, bat3l)
-GSETSPR(1008, hid0)
-GSETSPR(1009, hid1)
-GSETSPR(1010, iabr)
-GSETSPR(1013, dabr)
-GSETSPR(1023, pir)
-#else
-GSETSPR(144, cmpa)
-GSETSPR(145, cmpb)
-GSETSPR(146, cmpc)
-GSETSPR(147, cmpd)
-GSETSPR(158, ictrl)
-#endif
-
-static inline int get_sr(int n)
-{
-    int ret;
-
-    asm (" mfsrin %0,%1" : "=r" (ret) : "r" (n << 28));
-    return ret;
-}
-
-static inline void set_sr(int n, int val)
-{
-    asm ("mtsrin %0,%1" : : "r" (val), "r" (n << 28));
-}
-
-static inline void store_inst(void *p)
-{
-    asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
-}
-
-static inline void cflush(void *p)
-{
-    asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
-}
-
-static inline void cinval(void *p)
-{
-    asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
-}
-
diff --git a/arch/ppc/xmon/setjmp.c b/arch/ppc/xmon/setjmp.c
deleted file mode 100644
index 28352bac2ae6..000000000000
--- a/arch/ppc/xmon/setjmp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- * NB this file must be compiled with -O2.
- */
-
-int
-xmon_setjmp(long *buf)
-{
-    asm ("mflr 0; stw 0,0(%0);"
-	 "stw 1,4(%0); stw 2,8(%0);"
-	 "mfcr 0; stw 0,12(%0);"
-	 "stmw 13,16(%0)"
-	 : : "r" (buf));
-    /* XXX should save fp regs as well */
-    return 0;
-}
-
-void
-xmon_longjmp(long *buf, int val)
-{
-    if (val == 0)
-	val = 1;
-    asm ("lmw 13,16(%0);"
-	 "lwz 0,12(%0); mtcrf 0x38,0;"
-	 "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	 "mtlr 0; mr 3,%1"
-	 : : "r" (buf), "r" (val));
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
deleted file mode 100644
index 9056fe58aaa1..000000000000
--- a/arch/ppc/xmon/start.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/ibm4xx.h>
-
-static volatile unsigned char *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-static int xmon_expect(const char *str, unsigned int timeout);
-
-static int via_modem;
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-	if (DLAB)
-		sccd[3] &= ~DLAB;	/* reset DLAB */
-}
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_xmon(int key, struct pt_regs *regs,
-			      struct tty_struct *tty)
-{
-	xmon(regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op =
-{
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-#endif
-
-void
-xmon_map_scc(void)
-{
-#if defined(CONFIG_405GP)
-	sccd = (volatile unsigned char *)0xef600300;
-#elif defined(CONFIG_440EP)
-	sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SP)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SPE)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SPE_UART0_ADDR, 8);
-#elif defined(CONFIG_44x)
-	/* This is the default for 44x platforms.  Any boards that have a
-	   different UART address need to be put in cases before this or the
-	   port will be mapped incorrectly */
-	sccd = (volatile unsigned char *) ioremap64(PPC440GP_UART0_ADDR, 8);
-#endif /* platform */
-
-#ifndef CONFIG_PPC_PREP
-	sccc = sccd + 5;
-	TXRDY = 0x20;
-	RXRDY = 1;
-	DLAB = 0x80;
-#endif
-
-	register_sysrq_key('x', &sysrq_xmon_op);
-}
-
-static int scc_initialized;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-#ifdef CONFIG_SMP
-	static unsigned long xmon_write_lock;
-	int lock_wait = 1000000;
-	int locked;
-
-	while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
-		if (--lock_wait == 0)
-			break;
-#endif
-
-	if (!scc_initialized)
-		xmon_init_scc();
-	ct = 0;
-	for (i = 0; i < nb; ++i) {
-		while ((*sccc & TXRDY) == 0)
-			;
-		c = p[i];
-		if (c == '\n' && !ct) {
-			c = '\r';
-			ct = 1;
-			--i;
-		} else {
-			ct = 0;
-		}
-		buf_access();
-		*sccd = c;
-		eieio();
-	}
-
-#ifdef CONFIG_SMP
-	if (!locked)
-		clear_bit(0, &xmon_write_lock);
-#endif
-	return nb;
-}
-
-int xmon_wants_key;
-
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-    char *p = ptr;
-    int i;
-
-    if (!scc_initialized)
-	xmon_init_scc();
-    for (i = 0; i < nb; ++i) {
-	while ((*sccc & RXRDY) == 0)
-	    ;
-	buf_access();
-	*p++ = *sccd;
-    }
-    return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	if ((*sccc & RXRDY) == 0) {
-		;
-		return -1;
-	}
-	buf_access();
-	return *sccd;
-}
-
-void
-xmon_init_scc(void)
-{
-	scc_initialized = 1;
-	if (via_modem) {
-		for (;;) {
-			xmon_write(NULL, "ATE1V1\r", 7);
-			if (xmon_expect("OK", 5)) {
-				xmon_write(NULL, "ATA\r", 4);
-				if (xmon_expect("CONNECT", 40))
-					break;
-			}
-			xmon_write(NULL, "+++", 3);
-			xmon_expect("OK", 3);
-		}
-	}
-}
-
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(int arg)
-{
-	xmon_map_scc();
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return NULL;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-xmon_enter(void)
-{
-}
-
-void
-xmon_leave(void)
-{
-}
diff --git a/arch/ppc/xmon/start_8xx.c b/arch/ppc/xmon/start_8xx.c
deleted file mode 100644
index 30974068c223..000000000000
--- a/arch/ppc/xmon/start_8xx.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors.  Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-extern void xmon_printf(const char *fmt, ...);
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-void prom_drawhex(uint);
-void prom_drawstring(const char *str);
-
-static int use_screen = 1; /* default */
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-}
-
-void
-xmon_map_scc(void)
-{
-
-	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-	use_screen = 0;
-	
-	prom_drawstring("xmon uses serial port\n");
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_wants_key;
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	for (i = 0; i < nb; ++i) {
-		*p++ = xmon_8xx_read_char();
-	}
-	return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	return(xmon_8xx_read_poll());
-}
-
-void
-xmon_init_scc()
-{
-	scc_initialized = 1;
-}
-
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*prom_entry)(&args);
-    }
-}
-#endif
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(void)
-{
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-#if 0
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-#endif
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return 0;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-prom_drawhex(uint val)
-{
-	unsigned char buf[10];
-
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789abcdef"[val & 0x0f];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	xmon_fputs(buf, xmon_stdout);
-}
-
-void
-prom_drawstring(const char *str)
-{
-	xmon_fputs(str, xmon_stdout);
-}
diff --git a/arch/ppc/xmon/subr_prf.c b/arch/ppc/xmon/subr_prf.c
deleted file mode 100644
index 126624f3f2ed..000000000000
--- a/arch/ppc/xmon/subr_prf.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Written by Cort Dougan to replace the version originally used
- * by Paul Mackerras, which came from NetBSD and thus had copyright
- * conflicts with Linux.
- *
- * This file makes liberal use of the standard linux utility
- * routines to reduce the size of the binary.  We assume we can
- * trust some parts of Linux inside the debugger.
- *   -- Cort (cort@cs.nmt.edu)
- *
- * Copyright (C) 1999 Cort Dougan.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <stdarg.h>
-#include "nonstdio.h"
-
-extern int xmon_write(void *, void *, int);
-
-void
-xmon_vfprintf(void *f, const char *fmt, va_list ap)
-{
-	static char xmon_buf[2048];
-	int n;
-
-	n = vsprintf(xmon_buf, fmt, ap);
-	xmon_write(f, xmon_buf, n);
-}
-
-void
-xmon_printf(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(stdout, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_fprintf(void *f, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(f, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_puts(char *s)
-{
-	xmon_write(stdout, s, strlen(s));
-}
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
deleted file mode 100644
index b1a91744fd2d..000000000000
--- a/arch/ppc/xmon/xmon.c
+++ /dev/null
@@ -1,1780 +0,0 @@
-/*
- * Routines providing a simple monitor for use on the PowerMac.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/kallsyms.h>
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <asm/machdep.h>
-#include <asm/xmon.h>
-#include "nonstdio.h"
-#include "privinst.h"
-
-#define scanhex	xmon_scanhex
-#define skipbl	xmon_skipbl
-
-#ifdef CONFIG_SMP
-static unsigned long cpus_in_xmon = 0;
-static unsigned long got_xmon = 0;
-static volatile int take_xmon = -1;
-#endif /* CONFIG_SMP */
-
-static unsigned adrs;
-static int size = 1;
-static unsigned ndump = 64;
-static unsigned nidump = 16;
-static unsigned ncsum = 4096;
-static int termch;
-
-static u_int bus_error_jmp[100];
-#define setjmp xmon_setjmp
-#define longjmp xmon_longjmp
-
-/* Breakpoint stuff */
-struct bpt {
-	unsigned address;
-	unsigned instr;
-	unsigned count;
-	unsigned char enabled;
-};
-
-#define NBPTS	16
-static struct bpt bpts[NBPTS];
-static struct bpt dabr;
-static struct bpt iabr;
-static unsigned bpinstr = 0x7fe00008;	/* trap */
-
-/* Prototypes */
-extern void (*debugger_fault_handler)(struct pt_regs *);
-static int cmds(struct pt_regs *);
-static int mread(unsigned, void *, int);
-static int mwrite(unsigned, void *, int);
-static void handle_fault(struct pt_regs *);
-static void byterev(unsigned char *, int);
-static void memex(void);
-static int bsesc(void);
-static void dump(void);
-static void prdump(unsigned, int);
-#ifdef __MWERKS__
-static void prndump(unsigned, int);
-static int nvreadb(unsigned);
-#endif
-static int ppc_inst_dump(unsigned, int);
-void print_address(unsigned);
-static int getsp(void);
-static void dump_hash_table(void);
-static void backtrace(struct pt_regs *);
-static void excprint(struct pt_regs *);
-static void prregs(struct pt_regs *);
-static void memops(int);
-static void memlocate(void);
-static void memzcan(void);
-static void memdiffs(unsigned char *, unsigned char *, unsigned, unsigned);
-int skipbl(void);
-int scanhex(unsigned *valp);
-static void scannl(void);
-static int hexdigit(int);
-void getstring(char *, int);
-static void flush_input(void);
-static int inchar(void);
-static void take_input(char *);
-/* static void openforth(void); */
-static unsigned read_spr(int);
-static void write_spr(int, unsigned);
-static void super_regs(void);
-static void symbol_lookup(void);
-static void remove_bpts(void);
-static void insert_bpts(void);
-static struct bpt *at_breakpoint(unsigned pc);
-static void bpt_cmds(void);
-void cacheflush(void);
-#ifdef CONFIG_SMP
-static void cpu_cmd(void);
-#endif /* CONFIG_SMP */
-static void csum(void);
-static void bootcmds(void);
-static void proccall(void);
-static void printtime(void);
-
-extern int print_insn_big_powerpc(FILE *, unsigned long, unsigned);
-extern void printf(const char *fmt, ...);
-extern int putchar(int ch);
-extern int setjmp(u_int *);
-extern void longjmp(u_int *, int);
-
-extern void xmon_enter(void);
-extern void xmon_leave(void);
-
-static unsigned start_tb[NR_CPUS][2];
-static unsigned stop_tb[NR_CPUS][2];
-
-#define GETWORD(v)	(((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
-
-#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'f') \
-			 || ('A' <= (c) && (c) <= 'F'))
-#define isalnum(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'z') \
-			 || ('A' <= (c) && (c) <= 'Z'))
-#define isspace(c)	(c == ' ' || c == '\t' || c == 10 || c == 13 || c == 0)
-
-static char *help_string = "\
-Commands:\n\
-  d	dump bytes\n\
-  di	dump instructions\n\
-  df	dump float values\n\
-  dd	dump double values\n\
-  e	print exception information\n\
-  h	dump hash table\n\
-  m	examine/change memory\n\
-  mm	move a block of memory\n\
-  ms	set a block of memory\n\
-  md	compare two blocks of memory\n\
-  r	print registers\n\
-  S	print special registers\n\
-  t	print backtrace\n\
-  la	lookup address\n\
-  ls	lookup symbol\n\
-  C	checksum\n\
-  p	call function with arguments\n\
-  T	print time\n\
-  x	exit monitor\n\
-  zr    reboot\n\
-  zh    halt\n\
-";
-
-static int xmon_trace[NR_CPUS];
-#define SSTEP	1		/* stepping because of 's' command */
-#define BRSTEP	2		/* stepping over breakpoint */
-
-#ifdef CONFIG_4xx
-#define MSR_SSTEP_ENABLE 0x200
-#else
-#define MSR_SSTEP_ENABLE 0x400
-#endif
-
-static struct pt_regs *xmon_regs[NR_CPUS];
-
-extern inline void sync(void)
-{
-	asm volatile("sync; isync");
-}
-
-extern inline void __delay(unsigned int loops)
-{
-	if (loops != 0)
-		__asm__ __volatile__("mtctr %0; 1: bdnz 1b" : :
-				     "r" (loops) : "ctr");
-}
-
-/* Print an address in numeric and symbolic form (if possible) */
-static void xmon_print_symbol(unsigned long address, const char *mid,
-			      const char *after)
-{
-	char *modname;
-	const char *name = NULL;
-	unsigned long offset, size;
-	static char tmpstr[128];
-
-	printf("%.8lx", address);
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		name = kallsyms_lookup(address, &size, &offset, &modname,
-				       tmpstr);
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-	}
-	debugger_fault_handler = NULL;
-
-	if (name) {
-		printf("%s%s+%#lx/%#lx", mid, name, offset, size);
-		if (modname)
-			printf(" [%s]", modname);
-	}
-	printf("%s", after);
-}
-
-static void get_tb(unsigned *p)
-{
-	unsigned hi, lo, hiagain;
-
-	if ((get_pvr() >> 16) == 1)
-		return;
-
-	do {
-		asm volatile("mftbu %0; mftb %1; mftbu %2"
-			     : "=r" (hi), "=r" (lo), "=r" (hiagain));
-	} while (hi != hiagain);
-	p[0] = hi;
-	p[1] = lo;
-}
-
-static inline void xmon_enable_sstep(struct pt_regs *regs)
-{
-	regs->msr |= MSR_SSTEP_ENABLE;
-#ifdef CONFIG_4xx
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
-#endif
-}
-
-int xmon(struct pt_regs *excp)
-{
-	struct pt_regs regs;
-	int msr, cmd;
-
-	get_tb(stop_tb[smp_processor_id()]);
-	if (excp == NULL) {
-		asm volatile ("stw	0,0(%0)\n\
-			lwz	0,0(1)\n\
-			stw	0,4(%0)\n\
-			stmw	2,8(%0)" : : "b" (&regs));
-		regs.nip = regs.link = ((unsigned long *)regs.gpr[1])[1];
-		regs.msr = get_msr();
-		regs.ctr = get_ctr();
-		regs.xer = get_xer();
-		regs.ccr = get_cr();
-		regs.trap = 0;
-		excp = &regs;
-	}
-
-	msr = get_msr();
-	set_msr(msr & ~0x8000);	/* disable interrupts */
-	xmon_regs[smp_processor_id()] = excp;
-	xmon_enter();
-	excprint(excp);
-#ifdef CONFIG_SMP
-	if (test_and_set_bit(smp_processor_id(), &cpus_in_xmon))
-		for (;;)
-			;
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-	/*
-	 * XXX: breakpoints are removed while any cpu is in xmon
-	 */
-#endif /* CONFIG_SMP */
-	remove_bpts();
-	cmd = cmds(excp);
-	if (cmd == 's') {
-		xmon_trace[smp_processor_id()] = SSTEP;
-		xmon_enable_sstep(excp);
-	} else if (at_breakpoint(excp->nip)) {
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(excp);
-	} else {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	}
-	xmon_leave();
-	xmon_regs[smp_processor_id()] = NULL;
-#ifdef CONFIG_SMP
-	clear_bit(0, &got_xmon);
-	clear_bit(smp_processor_id(), &cpus_in_xmon);
-#endif /* CONFIG_SMP */
-	set_msr(msr);		/* restore interrupt enable */
-	get_tb(start_tb[smp_processor_id()]);
-
-	return cmd != 'X';
-}
-
-irqreturn_t
-xmon_irq(int irq, void *d, struct pt_regs *regs)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	printf("Keyboard interrupt\n");
-	xmon(regs);
-	local_irq_restore(flags);
-	return IRQ_HANDLED;
-}
-
-int
-xmon_bpt(struct pt_regs *regs)
-{
-	struct bpt *bp;
-
-	bp = at_breakpoint(regs->nip);
-	if (!bp)
-		return 0;
-	if (bp->count) {
-		--bp->count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(regs);
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_sstep(struct pt_regs *regs)
-{
-	if (!xmon_trace[smp_processor_id()])
-		return 0;
-	if (xmon_trace[smp_processor_id()] == BRSTEP) {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_dabr_match(struct pt_regs *regs)
-{
-	if (dabr.enabled && dabr.count) {
-		--dabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		dabr.instr = regs->nip;
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_iabr_match(struct pt_regs *regs)
-{
-	if (iabr.enabled && iabr.count) {
-		--iabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-static struct bpt *
-at_breakpoint(unsigned pc)
-{
-	int i;
-	struct bpt *bp;
-
-	if (dabr.enabled && pc == dabr.instr)
-		return &dabr;
-	if (iabr.enabled && pc == iabr.address)
-		return &iabr;
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp)
-		if (bp->enabled && pc == bp->address)
-			return bp;
-	return NULL;
-}
-
-static void
-insert_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &bp->instr, 4) != 4
-		    || mwrite(bp->address, &bpinstr, 4) != 4) {
-			printf("Couldn't insert breakpoint at %x, disabling\n",
-			       bp->address);
-			bp->enabled = 0;
-		}
-		store_inst((void *) bp->address);
-	}
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	if (dabr.enabled)
-		set_dabr(dabr.address);
-	if (iabr.enabled)
-		set_iabr(iabr.address);
-#endif
-}
-
-static void
-remove_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-	unsigned instr;
-
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	set_dabr(0);
-	set_iabr(0);
-#endif
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &instr, 4) == 4
-		    && instr == bpinstr
-		    && mwrite(bp->address, &bp->instr, 4) != 4)
-			printf("Couldn't remove breakpoint at %x\n",
-			       bp->address);
-		store_inst((void *) bp->address);
-	}
-}
-
-static char *last_cmd;
-
-/* Command interpreting routine */
-static int
-cmds(struct pt_regs *excp)
-{
-	int cmd;
-
-	last_cmd = NULL;
-	for(;;) {
-#ifdef CONFIG_SMP
-		printf("%d:", smp_processor_id());
-#endif /* CONFIG_SMP */
-		printf("mon> ");
-		fflush(stdout);
-		flush_input();
-		termch = 0;
-		cmd = skipbl();
-		if( cmd == '\n' ) {
-			if (last_cmd == NULL)
-				continue;
-			take_input(last_cmd);
-			last_cmd = NULL;
-			cmd = inchar();
-		}
-		switch (cmd) {
-		case 'm':
-			cmd = inchar();
-			switch (cmd) {
-			case 'm':
-			case 's':
-			case 'd':
-				memops(cmd);
-				break;
-			case 'l':
-				memlocate();
-				break;
-			case 'z':
-				memzcan();
-				break;
-			default:
-				termch = cmd;
-				memex();
-			}
-			break;
-		case 'd':
-			dump();
-			break;
-		case 'l':
-			symbol_lookup();
-			break;
-		case 'r':
-			if (excp != NULL)
-				prregs(excp);	/* print regs */
-			break;
-		case 'e':
-			if (excp == NULL)
-				printf("No exception information\n");
-			else
-				excprint(excp);
-			break;
-		case 'S':
-			super_regs();
-			break;
-		case 't':
-			backtrace(excp);
-			break;
-		case 'f':
-			cacheflush();
-			break;
-		case 'h':
-			dump_hash_table();
-			break;
-		case 's':
-		case 'x':
-		case EOF:
-			return cmd;
-		case '?':
-			printf(help_string);
-			break;
-		default:
-			printf("Unrecognized command: ");
-			if( ' ' < cmd && cmd <= '~' )
-				putchar(cmd);
-			else
-				printf("\\x%x", cmd);
-			printf(" (type ? for help)\n");
-			break;
-		case 'b':
-			bpt_cmds();
-			break;
-		case 'C':
-			csum();
-			break;
-#ifdef CONFIG_SMP
-		case 'c':
-			cpu_cmd();
-			break;
-#endif /* CONFIG_SMP */
-		case 'z':
-			bootcmds();
-			break;
-		case 'p':
-			proccall();
-			break;
-		case 'T':
-			printtime();
-			break;
-		}
-	}
-}
-
-extern unsigned tb_to_us;
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-static void printtime(void)
-{
-	unsigned int delta;
-
-	delta = stop_tb[smp_processor_id()][1]
-		- start_tb[smp_processor_id()][1];
-	delta = mulhwu(tb_to_us, delta);
-	printf("%u.%06u seconds\n", delta / 1000000, delta % 1000000);
-}
-
-static void bootcmds(void)
-{
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'r')
-		ppc_md.restart(NULL);
-	else if (cmd == 'h')
-		ppc_md.halt();
-	else if (cmd == 'p')
-		ppc_md.power_off();
-}
-
-#ifdef CONFIG_SMP
-static void cpu_cmd(void)
-{
-	unsigned cpu;
-	int timeout;
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'i') {
-		/* interrupt other cpu(s) */
-		cpu = MSG_ALL_BUT_SELF;
-		if (scanhex(&cpu))
-			smp_send_xmon_break(cpu);
-		return;
-	}
-	termch = cmd;
-	if (!scanhex(&cpu)) {
-		/* print cpus waiting or in xmon */
-		printf("cpus stopped:");
-		for (cpu = 0; cpu < NR_CPUS; ++cpu) {
-			if (test_bit(cpu, &cpus_in_xmon)) {
-				printf(" %d", cpu);
-				if (cpu == smp_processor_id())
-					printf("*", cpu);
-			}
-		}
-		printf("\n");
-		return;
-	}
-	/* try to switch to cpu specified */
-	take_xmon = cpu;
-	timeout = 10000000;
-	while (take_xmon >= 0) {
-		if (--timeout == 0) {
-			/* yes there's a race here */
-			take_xmon = -1;
-			printf("cpu %u didn't take control\n", cpu);
-			return;
-		}
-	}
-	/* now have to wait to be given control back */
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-}
-#endif /* CONFIG_SMP */
-
-
-static unsigned short fcstab[256] = {
-	0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-	0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-	0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-	0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-	0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-	0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-	0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-	0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-	0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-	0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-	0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-	0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-	0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-	0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-	0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-	0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-	0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-	0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-	0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-	0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-	0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-	0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-	0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-	0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-	0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-	0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-	0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-	0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-	0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-	0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-	0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-	0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-#define FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-static void
-csum(void)
-{
-	unsigned int i;
-	unsigned short fcs;
-	unsigned char v;
-
-	if (!scanhex(&adrs))
-		return;
-	if (!scanhex(&ncsum))
-		return;
-	fcs = 0xffff;
-	for (i = 0; i < ncsum; ++i) {
-		if (mread(adrs+i, &v, 1) == 0) {
-			printf("csum stopped at %x\n", adrs+i);
-			break;
-		}
-		fcs = FCS(fcs, v);
-	}
-	printf("%x\n", fcs);
-}
-
-static void
-bpt_cmds(void)
-{
-	int cmd;
-	unsigned a;
-	int mode, i;
-	struct bpt *bp;
-
-	cmd = inchar();
-	switch (cmd) {
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	case 'd':
-		mode = 7;
-		cmd = inchar();
-		if (cmd == 'r')
-			mode = 5;
-		else if (cmd == 'w')
-			mode = 6;
-		else
-			termch = cmd;
-		cmd = inchar();
-		if (cmd == 'p')
-			mode &= ~4;
-		else
-			termch = cmd;
-		dabr.address = 0;
-		dabr.count = 0;
-		dabr.enabled = scanhex(&dabr.address);
-		scanhex(&dabr.count);
-		if (dabr.enabled)
-			dabr.address = (dabr.address & ~7) | mode;
-		break;
-	case 'i':
-		cmd = inchar();
-		if (cmd == 'p')
-			mode = 2;
-		else
-			mode = 3;
-		iabr.address = 0;
-		iabr.count = 0;
-		iabr.enabled = scanhex(&iabr.address);
-		if (iabr.enabled)
-			iabr.address |= mode;
-		scanhex(&iabr.count);
-		break;
-#endif
-	case 'c':
-		if (!scanhex(&a)) {
-			/* clear all breakpoints */
-			for (i = 0; i < NBPTS; ++i)
-				bpts[i].enabled = 0;
-			iabr.enabled = 0;
-			dabr.enabled = 0;
-			printf("All breakpoints cleared\n");
-		} else {
-			bp = at_breakpoint(a);
-			if (bp == 0) {
-				printf("No breakpoint at %x\n", a);
-			} else {
-				bp->enabled = 0;
-			}
-		}
-		break;
-	default:
-		termch = cmd;
-		if (!scanhex(&a)) {
-			/* print all breakpoints */
-			printf("type  address   count\n");
-			if (dabr.enabled) {
-				printf("data %.8x %8x [", dabr.address & ~7,
-				       dabr.count);
-				if (dabr.address & 1)
-					printf("r");
-				if (dabr.address & 2)
-					printf("w");
-				if (!(dabr.address & 4))
-					printf("p");
-				printf("]\n");
-			}
-			if (iabr.enabled)
-				printf("inst %.8x %8x\n", iabr.address & ~3,
-				       iabr.count);
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (bp->enabled)
-					printf("trap %.8x %8x\n", bp->address,
-					       bp->count);
-			break;
-		}
-		bp = at_breakpoint(a);
-		if (bp == 0) {
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (!bp->enabled)
-					break;
-			if (bp >= &bpts[NBPTS]) {
-				printf("Sorry, no free breakpoints\n");
-				break;
-			}
-		}
-		bp->enabled = 1;
-		bp->address = a;
-		bp->count = 0;
-		scanhex(&bp->count);
-		break;
-	}
-}
-
-static void
-backtrace(struct pt_regs *excp)
-{
-	unsigned sp;
-	unsigned stack[2];
-	struct pt_regs regs;
-	extern char ret_from_except, ret_from_except_full, ret_from_syscall;
-
-	printf("backtrace:\n");
-	
-	if (excp != NULL)
-		sp = excp->gpr[1];
-	else
-		sp = getsp();
-	scanhex(&sp);
-	scannl();
-	for (; sp != 0; sp = stack[0]) {
-		if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-			break;
-		printf("[%.8lx] ", stack[0]);
-		xmon_print_symbol(stack[1], " ", "\n");
-		if (stack[1] == (unsigned) &ret_from_except
-		    || stack[1] == (unsigned) &ret_from_except_full
-		    || stack[1] == (unsigned) &ret_from_syscall) {
-			if (mread(sp+16, &regs, sizeof(regs)) != sizeof(regs))
-				break;
-			printf("exception:%x [%x] %x\n", regs.trap, sp+16,
-			       regs.nip);
-			sp = regs.gpr[1];
-			if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-				break;
-		}
-	}
-}
-
-int
-getsp(void)
-{
-    int x;
-
-    asm("mr %0,1" : "=r" (x) :);
-    return x;
-}
-
-void
-excprint(struct pt_regs *fp)
-{
-	int trap;
-
-#ifdef CONFIG_SMP
-	printf("cpu %d: ", smp_processor_id());
-#endif /* CONFIG_SMP */
-	printf("vector: %x at pc=", fp->trap);
-	xmon_print_symbol(fp->nip, ": ", ", lr=");
-	xmon_print_symbol(fp->link, ": ", "\n");
-	printf("msr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp);
-	trap = TRAP(fp);
-	if (trap == 0x300 || trap == 0x600)
-		printf("dar = %x, dsisr = %x\n", fp->dar, fp->dsisr);
-	if (current)
-		printf("current = %x, pid = %d, comm = %s\n",
-		       current, current->pid, current->comm);
-}
-
-void
-prregs(struct pt_regs *fp)
-{
-	int n;
-	unsigned base;
-
-	if (scanhex(&base))
-		fp = (struct pt_regs *) base;
-	for (n = 0; n < 32; ++n) {
-		printf("R%.2d = %.8x%s", n, fp->gpr[n],
-		       (n & 3) == 3? "\n": "   ");
-		if (n == 12 && !FULL_REGS(fp)) {
-			printf("\n");
-			break;
-		}
-	}
-	printf("pc  = %.8x   msr = %.8x   lr  = %.8x   cr  = %.8x\n",
-	       fp->nip, fp->msr, fp->link, fp->ccr);
-	printf("ctr = %.8x   xer = %.8x   trap = %4x\n",
-	       fp->ctr, fp->xer, fp->trap);
-}
-
-void
-cacheflush(void)
-{
-	int cmd;
-	unsigned nflush;
-
-	cmd = inchar();
-	if (cmd != 'i')
-		termch = cmd;
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	nflush = 1;
-	scanhex(&nflush);
-	nflush = (nflush + 31) / 32;
-	if (cmd != 'i') {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cflush((void *) adrs);
-	} else {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cinval((void *) adrs);
-	}
-}
-
-unsigned int
-read_spr(int n)
-{
-    unsigned int instrs[2];
-    int (*code)(void);
-
-    instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(void)) instrs;
-    return code();
-}
-
-void
-write_spr(int n, unsigned int val)
-{
-    unsigned int instrs[2];
-    int (*code)(unsigned int);
-
-    instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(unsigned int)) instrs;
-    code(val);
-}
-
-static unsigned int regno;
-extern char exc_prolog;
-extern char dec_exc;
-
-void
-super_regs(void)
-{
-	int i, cmd;
-	unsigned val;
-
-	cmd = skipbl();
-	if (cmd == '\n') {
-		printf("msr = %x, pvr = %x\n", get_msr(), get_pvr());
-		printf("sprg0-3 = %x %x %x %x\n", get_sprg0(), get_sprg1(),
-		       get_sprg2(), get_sprg3());
-		printf("srr0 = %x, srr1 = %x\n", get_srr0(), get_srr1());
-#ifdef CONFIG_PPC_STD_MMU
-		printf("sr0-15 =");
-		for (i = 0; i < 16; ++i)
-			printf(" %x", get_sr(i));
-		printf("\n");
-#endif
-		asm("mr %0,1" : "=r" (i) :);
-		printf("sp = %x ", i);
-		asm("mr %0,2" : "=r" (i) :);
-		printf("toc = %x\n", i);
-		return;
-	}
-
-	scanhex(&regno);
-	switch (cmd) {
-	case 'w':
-		val = read_spr(regno);
-		scanhex(&val);
-		write_spr(regno, val);
-		/* fall through */
-	case 'r':
-		printf("spr %x = %x\n", regno, read_spr(regno));
-		break;
-	case 's':
-		val = get_sr(regno);
-		scanhex(&val);
-		set_sr(regno, val);
-		break;
-	case 'm':
-		val = get_msr();
-		scanhex(&val);
-		set_msr(val);
-		break;
-	}
-	scannl();
-}
-
-#ifndef CONFIG_PPC_STD_MMU
-static void
-dump_hash_table(void)
-{
-	printf("This CPU doesn't have a hash table.\n");
-}
-#else
-
-static void
-dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
-{
-	extern void *Hash;
-	extern unsigned long Hash_size;
-	unsigned *htab = Hash;
-	unsigned hsize = Hash_size;
-	unsigned v, hmask, va, last_va = 0;
-	int found, last_found, i;
-	unsigned *hg, w1, last_w2 = 0, last_va0 = 0;
-
-	last_found = 0;
-	hmask = hsize / 64 - 1;
-	va = start;
-	start = (start >> 12) & 0xffff;
-	end = (end >> 12) & 0xffff;
-	for (v = start; v < end; ++v) {
-		found = 0;
-		hg = htab + (((v ^ seg) & hmask) * 16);
-		w1 = 0x80000000 | (seg << 7) | (v >> 10);
-		for (i = 0; i < 8; ++i, hg += 2) {
-			if (*hg == w1) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found) {
-			w1 ^= 0x40;
-			hg = htab + ((~(v ^ seg) & hmask) * 16);
-			for (i = 0; i < 8; ++i, hg += 2) {
-				if (*hg == w1) {
-					found = 1;
-					break;
-				}
-			}
-		}
-		if (!(last_found && found && (hg[1] & ~0x180) == last_w2 + 4096)) {
-			if (last_found) {
-				if (last_va != last_va0)
-					printf(" ... %x", last_va);
-				printf("\n");
-			}
-			if (found) {
-				printf("%x to %x", va, hg[1]);
-				last_va0 = va;
-			}
-			last_found = found;
-		}
-		if (found) {
-			last_w2 = hg[1] & ~0x180;
-			last_va = va;
-		}
-		va += 4096;
-	}
-	if (last_found)
-		printf(" ... %x\n", last_va);
-}
-
-static unsigned hash_ctx;
-static unsigned hash_start;
-static unsigned hash_end;
-
-static void
-dump_hash_table(void)
-{
-	int seg;
-	unsigned seg_start, seg_end;
-
-	hash_ctx = 0;
-	hash_start = 0;
-	hash_end = 0xfffff000;
-	scanhex(&hash_ctx);
-	scanhex(&hash_start);
-	scanhex(&hash_end);
-	printf("Mappings for context %x\n", hash_ctx);
-	seg_start = hash_start;
-	for (seg = hash_start >> 28; seg <= hash_end >> 28; ++seg) {
-		seg_end = (seg << 28) | 0x0ffff000;
-		if (seg_end > hash_end)
-			seg_end = hash_end;
-		dump_hash_table_seg((hash_ctx << 4) + (seg * 0x111),
-				    seg_start, seg_end);
-		seg_start = seg_end + 0x1000;
-	}
-}
-#endif /* CONFIG_PPC_STD_MMU */
-
-/*
- * Stuff for reading and writing memory safely
- */
-
-int
-mread(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)q = *(short *)p;	break;
-		case 4: *(int *)q = *(int *)p;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*q++ = *p++;
-				sync();
-			}
-		}
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-		n = size;
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-int
-mwrite(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)p = *(short *)q;	break;
-		case 4: *(int *)p = *(int *)q;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*p++ = *q++;
-				sync();
-			}
-		}
-		sync();
-		n = size;
-	} else {
-		printf("*** Error writing address %x\n", adrs + n);
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-static int fault_type;
-static int fault_except;
-static char *fault_chars[] = { "--", "**", "##" };
-
-static void
-handle_fault(struct pt_regs *regs)
-{
-	fault_except = TRAP(regs);
-	fault_type = TRAP(regs) == 0x200? 0: TRAP(regs) == 0x300? 1: 2;
-	longjmp(bus_error_jmp, 1);
-}
-
-#define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
-
-void
-byterev(unsigned char *val, int size)
-{
-	int t;
-	
-	switch (size) {
-	case 2:
-		SWAP(val[0], val[1], t);
-		break;
-	case 4:
-		SWAP(val[0], val[3], t);
-		SWAP(val[1], val[2], t);
-		break;
-	}
-}
-
-static int brev;
-static int mnoread;
-
-void
-memex(void)
-{
-    int cmd, inc, i, nslash;
-    unsigned n;
-    unsigned char val[4];
-
-    last_cmd = "m\n";
-    scanhex(&adrs);
-    while ((cmd = skipbl()) != '\n') {
-	switch( cmd ){
-	case 'b':	size = 1;	break;
-	case 'w':	size = 2;	break;
-	case 'l':	size = 4;	break;
-	case 'r': 	brev = !brev;	break;
-	case 'n':	mnoread = 1;	break;
-	case '.':	mnoread = 0;	break;
-	}
-    }
-    if( size <= 0 )
-	size = 1;
-    else if( size > 4 )
-	size = 4;
-    for(;;){
-	if (!mnoread)
-	    n = mread(adrs, val, size);
-	printf("%.8x%c", adrs, brev? 'r': ' ');
-	if (!mnoread) {
-	    if (brev)
-		byterev(val, size);
-	    putchar(' ');
-	    for (i = 0; i < n; ++i)
-		printf("%.2x", val[i]);
-	    for (; i < size; ++i)
-		printf("%s", fault_chars[fault_type]);
-	}
-	putchar(' ');
-	inc = size;
-	nslash = 0;
-	for(;;){
-	    if( scanhex(&n) ){
-		for (i = 0; i < size; ++i)
-		    val[i] = n >> (i * 8);
-		if (!brev)
-		    byterev(val, size);
-		mwrite(adrs, val, size);
-		inc = size;
-	    }
-	    cmd = skipbl();
-	    if (cmd == '\n')
-		break;
-	    inc = 0;
-	    switch (cmd) {
-	    case '\'':
-		for(;;){
-		    n = inchar();
-		    if( n == '\\' )
-			n = bsesc();
-		    else if( n == '\'' )
-			break;
-		    for (i = 0; i < size; ++i)
-			val[i] = n >> (i * 8);
-		    if (!brev)
-			byterev(val, size);
-		    mwrite(adrs, val, size);
-		    adrs += size;
-		}
-		adrs -= size;
-		inc = size;
-		break;
-	    case ',':
-		adrs += size;
-		break;
-	    case '.':
-		mnoread = 0;
-		break;
-	    case ';':
-		break;
-	    case 'x':
-	    case EOF:
-		scannl();
-		return;
-	    case 'b':
-	    case 'v':
-		size = 1;
-		break;
-	    case 'w':
-		size = 2;
-		break;
-	    case 'l':
-		size = 4;
-		break;
-	    case '^':
-		adrs -= size;
-		break;
-		break;
-	    case '/':
-		if (nslash > 0)
-		    adrs -= 1 << nslash;
-		else
-		    nslash = 0;
-		nslash += 4;
-		adrs += 1 << nslash;
-		break;
-	    case '\\':
-		if (nslash < 0)
-		    adrs += 1 << -nslash;
-		else
-		    nslash = 0;
-		nslash -= 4;
-		adrs -= 1 << -nslash;
-		break;
-	    case 'm':
-		scanhex(&adrs);
-		break;
-	    case 'n':
-		mnoread = 1;
-		break;
-	    case 'r':
-		brev = !brev;
-		break;
-	    case '<':
-		n = size;
-		scanhex(&n);
-		adrs -= n;
-		break;
-	    case '>':
-		n = size;
-		scanhex(&n);
-		adrs += n;
-		break;
-	    }
-	}
-	adrs += inc;
-    }
-}
-
-int
-bsesc(void)
-{
-	int c;
-
-	c = inchar();
-	switch( c ){
-	case 'n':	c = '\n';	break;
-	case 'r':	c = '\r';	break;
-	case 'b':	c = '\b';	break;
-	case 't':	c = '\t';	break;
-	}
-	return c;
-}
-
-void
-dump(void)
-{
-	int c;
-
-	c = inchar();
-	if ((isxdigit(c) && c != 'f' && c != 'd') || c == '\n')
-		termch = c;
-	scanhex(&adrs);
-	if( termch != '\n')
-		termch = 0;
-	if( c == 'i' ){
-		scanhex(&nidump);
-		if( nidump == 0 )
-			nidump = 16;
-		adrs += ppc_inst_dump(adrs, nidump);
-		last_cmd = "di\n";
-	} else {
-		scanhex(&ndump);
-		if( ndump == 0 )
-			ndump = 64;
-		prdump(adrs, ndump);
-		adrs += ndump;
-		last_cmd = "d\n";
-	}
-}
-
-void
-prdump(unsigned adrs, int ndump)
-{
-	register int n, m, c, r, nr;
-	unsigned char temp[16];
-
-	for( n = ndump; n > 0; ){
-		printf("%.8x", adrs);
-		putchar(' ');
-		r = n < 16? n: 16;
-		nr = mread(adrs, temp, r);
-		adrs += nr;
-		for( m = 0; m < r; ++m ){
-			putchar((m & 3) == 0 && m > 0? '.': ' ');
-			if( m < nr )
-				printf("%.2x", temp[m]);
-			else
-				printf("%s", fault_chars[fault_type]);
-		}
-		for(; m < 16; ++m )
-			printf("   ");
-		printf("  |");
-		for( m = 0; m < r; ++m ){
-			if( m < nr ){
-				c = temp[m];
-				putchar(' ' <= c && c <= '~'? c: '.');
-			} else
-				putchar(' ');
-		}
-		n -= r;
-		for(; m < 16; ++m )
-			putchar(' ');
-		printf("|\n");
-		if( nr < r )
-			break;
-	}
-}
-
-int
-ppc_inst_dump(unsigned adr, int count)
-{
-	int nr, dotted;
-	unsigned first_adr;
-	unsigned long inst, last_inst = 0;
-	unsigned char val[4];
-
-	dotted = 0;
-	for (first_adr = adr; count > 0; --count, adr += 4){
-		nr = mread(adr, val, 4);
-		if( nr == 0 ){
-			const char *x = fault_chars[fault_type];
-			printf("%.8x  %s%s%s%s\n", adr, x, x, x, x);
-			break;
-		}
-		inst = GETWORD(val);
-		if (adr > first_adr && inst == last_inst) {
-			if (!dotted) {
-				printf(" ...\n");
-				dotted = 1;
-			}
-			continue;
-		}
-		dotted = 0;
-		last_inst = inst;
-		printf("%.8x  ", adr);
-		printf("%.8x\t", inst);
-		print_insn_big_powerpc(stdout, inst, adr);	/* always returns 4 */
-		printf("\n");
-	}
-	return adr - first_adr;
-}
-
-void
-print_address(unsigned addr)
-{
-	printf("0x%x", addr);
-}
-
-/*
- * Memory operations - move, set, print differences
- */
-static unsigned mdest;		/* destination address */
-static unsigned msrc;		/* source address */
-static unsigned mval;		/* byte value to set memory to */
-static unsigned mcount;		/* # bytes to affect */
-static unsigned mdiffs;		/* max # differences to print */
-
-void
-memops(int cmd)
-{
-	scanhex(&mdest);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(cmd == 's'? &mval: &msrc);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(&mcount);
-	switch( cmd ){
-	case 'm':
-		memmove((void *)mdest, (void *)msrc, mcount);
-		break;
-	case 's':
-		memset((void *)mdest, mval, mcount);
-		break;
-	case 'd':
-		if( termch != '\n' )
-			termch = 0;
-		scanhex(&mdiffs);
-		memdiffs((unsigned char *)mdest, (unsigned char *)msrc, mcount, mdiffs);
-		break;
-	}
-}
-
-void
-memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
-{
-	unsigned n, prt;
-
-	prt = 0;
-	for( n = nb; n > 0; --n )
-		if( *p1++ != *p2++ )
-			if( ++prt <= maxpr )
-				printf("%.8x %.2x # %.8x %.2x\n", (unsigned)p1 - 1,
-					p1[-1], (unsigned)p2 - 1, p2[-1]);
-	if( prt > maxpr )
-		printf("Total of %d differences\n", prt);
-}
-
-static unsigned mend;
-static unsigned mask;
-
-void
-memlocate(void)
-{
-	unsigned a, n;
-	unsigned char val[4];
-
-	last_cmd = "ml";
-	scanhex(&mdest);
-	if (termch != '\n') {
-		termch = 0;
-		scanhex(&mend);
-		if (termch != '\n') {
-			termch = 0;
-			scanhex(&mval);
-			mask = ~0;
-			if (termch != '\n') termch = 0;
-			scanhex(&mask);
-		}
-	}
-	n = 0;
-	for (a = mdest; a < mend; a += 4) {
-		if (mread(a, val, 4) == 4
-			&& ((GETWORD(val) ^ mval) & mask) == 0) {
-			printf("%.8x:  %.8x\n", a, GETWORD(val));
-			if (++n >= 10)
-				break;
-		}
-	}
-}
-
-static unsigned mskip = 0x1000;
-static unsigned mlim = 0xffffffff;
-
-void
-memzcan(void)
-{
-	unsigned char v;
-	unsigned a;
-	int ok, ook;
-
-	scanhex(&mdest);
-	if (termch != '\n') termch = 0;
-	scanhex(&mskip);
-	if (termch != '\n') termch = 0;
-	scanhex(&mlim);
-	ook = 0;
-	for (a = mdest; a < mlim; a += mskip) {
-		ok = mread(a, &v, 1);
-		if (ok && !ook) {
-			printf("%.8x .. ", a);
-			fflush(stdout);
-		} else if (!ok && ook)
-			printf("%.8x\n", a - mskip);
-		ook = ok;
-		if (a + mskip < a)
-			break;
-	}
-	if (ook)
-		printf("%.8x\n", a - mskip);
-}
-
-void proccall(void)
-{
-	unsigned int args[8];
-	unsigned int ret;
-	int i;
-	typedef unsigned int (*callfunc_t)(unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int);
-	callfunc_t func;
-
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	for (i = 0; i < 8; ++i)
-		args[i] = 0;
-	for (i = 0; i < 8; ++i) {
-		if (!scanhex(&args[i]) || termch == '\n')
-			break;
-		termch = 0;
-	}
-	func = (callfunc_t) adrs;
-	ret = 0;
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		ret = func(args[0], args[1], args[2], args[3],
-			   args[4], args[5], args[6], args[7]);
-		sync();
-		printf("return value is %x\n", ret);
-	} else {
-		printf("*** %x exception occurred\n", fault_except);
-	}
-	debugger_fault_handler = NULL;
-}
-
-/* Input scanning routines */
-int
-skipbl(void)
-{
-	int c;
-
-	if( termch != 0 ){
-		c = termch;
-		termch = 0;
-	} else
-		c = inchar();
-	while( c == ' ' || c == '\t' )
-		c = inchar();
-	return c;
-}
-
-#define N_PTREGS	44
-static char *regnames[N_PTREGS] = {
-	"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
-	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
-	"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-	"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
-	"pc", "msr", "or3", "ctr", "lr", "xer", "ccr", "mq",
-	"trap", "dar", "dsisr", "res"
-};
-
-int
-scanhex(unsigned *vp)
-{
-	int c, d;
-	unsigned v;
-
-	c = skipbl();
-	if (c == '%') {
-		/* parse register name */
-		char regname[8];
-		int i;
-
-		for (i = 0; i < sizeof(regname) - 1; ++i) {
-			c = inchar();
-			if (!isalnum(c)) {
-				termch = c;
-				break;
-			}
-			regname[i] = c;
-		}
-		regname[i] = 0;
-		for (i = 0; i < N_PTREGS; ++i) {
-			if (strcmp(regnames[i], regname) == 0) {
-				unsigned *rp = (unsigned *)
-					xmon_regs[smp_processor_id()];
-				if (rp == NULL) {
-					printf("regs not available\n");
-					return 0;
-				}
-				*vp = rp[i];
-				return 1;
-			}
-		}
-		printf("invalid register name '%%%s'\n", regname);
-		return 0;
-	} else if (c == '$') {
-		static char symname[128];
-		int i;
-		for (i=0; i<63; i++) {
-			c = inchar();
-			if (isspace(c)) {
-				termch = c;
-				break;
-			}
-			symname[i] = c;
-		}
-		symname[i++] = 0;
-		*vp = 0;
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			*vp = kallsyms_lookup_name(symname);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		if (!(*vp)) {
-			printf("unknown symbol\n");
-			return 0;
-		}
-		return 1;
-	}
-
-	d = hexdigit(c);
-	if( d == EOF ){
-		termch = c;
-		return 0;
-	}
-	v = 0;
-	do {
-		v = (v << 4) + d;
-		c = inchar();
-		d = hexdigit(c);
-	} while( d != EOF );
-	termch = c;
-	*vp = v;
-	return 1;
-}
-
-void
-scannl(void)
-{
-	int c;
-
-	c = termch;
-	termch = 0;
-	while( c != '\n' )
-		c = inchar();
-}
-
-int hexdigit(int c)
-{
-	if( '0' <= c && c <= '9' )
-		return c - '0';
-	if( 'A' <= c && c <= 'F' )
-		return c - ('A' - 10);
-	if( 'a' <= c && c <= 'f' )
-		return c - ('a' - 10);
-	return EOF;
-}
-
-void
-getstring(char *s, int size)
-{
-	int c;
-
-	c = skipbl();
-	do {
-		if( size > 1 ){
-			*s++ = c;
-			--size;
-		}
-		c = inchar();
-	} while( c != ' ' && c != '\t' && c != '\n' );
-	termch = c;
-	*s = 0;
-}
-
-static char line[256];
-static char *lineptr;
-
-void
-flush_input(void)
-{
-	lineptr = NULL;
-}
-
-int
-inchar(void)
-{
-	if (lineptr == NULL || *lineptr == 0) {
-		if (fgets(line, sizeof(line), stdin) == NULL) {
-			lineptr = NULL;
-			return EOF;
-		}
-		lineptr = line;
-	}
-	return *lineptr++;
-}
-
-void
-take_input(char *str)
-{
-	lineptr = str;
-}
-
-static void
-symbol_lookup(void)
-{
-	int type = inchar();
-	unsigned addr;
-	static char tmp[128];
-
-	switch (type) {
-	case 'a':
-		if (scanhex(&addr))
-			xmon_print_symbol(addr, ": ", "\n");
-		termch = 0;
-		break;
-	case 's':
-		getstring(tmp, 64);
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			addr = kallsyms_lookup_name(tmp);
-			if (addr)
-				printf("%s: %lx\n", tmp, addr);
-			else
-				printf("Symbol '%s' not found.\n", tmp);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		termch = 0;
-		break;
-	}
-}
-
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 5dc8f8028d52..eb530b4128ba 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -289,7 +289,7 @@ config WARN_STACK_SIZE
 	int "Maximum frame size considered safe (128-2048)"
 	range 128 2048
 	depends on WARN_STACK
-	default "256"
+	default "2048"
 	help
 	  This allows you to specify the maximum frame size a function may
 	  have without the compiler complaining about it.
diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c
index 57571f10270c..8841919ef7e6 100644
--- a/arch/s390/kernel/stacktrace.c
+++ b/arch/s390/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/kallsyms.h>
+#include <linux/module.h>
 
 static unsigned long save_context_stack(struct stack_trace *trace,
 					unsigned long sp,
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 08d2e7325252..f57095a2617c 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 }
 
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/*
-		 * Somebody might have asked allocation of a non-standard
-		 * resource
-		 */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
-		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-
 void pcibios_align_resource(void *data, struct resource *res,
 			    resource_size_t size, resource_size_t align)
 			    __attribute__ ((weak));
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 112b09f16f36..d00a3656c287 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5112c84f5421..da140611bb57 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -8,8 +8,7 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
 ifdef CONFIG_FTRACE
 # Do not profile debug utilities
-CFLAGS_REMOVE_tsc_64.o = -pg
-CFLAGS_REMOVE_tsc_32.o = -pg
+CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
 endif
 
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index de2d2e4ebad9..7c074eec39fb 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -56,6 +56,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	if (cpu_has(c, X86_FEATURE_ACPI))
 		buf[2] |= ACPI_PDC_T_FFH;
 
+	/*
+	 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled
+	 */
+	if (!cpu_has(c, X86_FEATURE_MWAIT))
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
+
 	obj->type = ACPI_TYPE_BUFFER;
 	obj->buffer.length = 12;
 	obj->buffer.pointer = (u8 *) buf;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 793ad2045f58..868de3d5c39d 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -158,6 +158,8 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+		if (strncmp(str, "old_ordering", 12) == 0)
+			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 75cb5da4ea0a..bf9b441331e9 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1213,9 +1213,9 @@ static int suspend(int vetoable)
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
-	device_resume();
+	device_resume(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1240,7 +1240,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 }
 
@@ -1326,7 +1326,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume();
+				device_resume(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a4665f37cfc5..a0e11c0cc872 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -120,7 +120,18 @@ static struct chipset early_qrk[] __initdata = {
 	{}
 };
 
-static void __init check_dev_quirk(int num, int slot, int func)
+/**
+ * check_dev_quirk - apply early quirks to a given PCI device
+ * @num: bus number
+ * @slot: slot number
+ * @func: PCI function
+ *
+ * Check the vendor & device ID against the early quirks table.
+ *
+ * If the device is single function, let early_quirks() know so we don't
+ * poke at this device again.
+ */
+static int __init check_dev_quirk(int num, int slot, int func)
 {
 	u16 class;
 	u16 vendor;
@@ -131,7 +142,7 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
 
 	if (class == 0xffff)
-		return;
+		return -1; /* no class, treat as single function */
 
 	vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
 
@@ -154,7 +165,9 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 	if (!(type & 0x80))
-		return;
+		return -1;
+
+	return 0;
 }
 
 void __init early_quirks(void)
@@ -167,6 +180,9 @@ void __init early_quirks(void)
 	/* Poor man's PCI discovery */
 	for (num = 0; num < 32; num++)
 		for (slot = 0; slot < 32; slot++)
-			for (func = 0; func < 8; func++)
-				check_dev_quirk(num, slot, func);
+			for (func = 0; func < 8; func++) {
+				/* Only probe function 0 on single fn devices */
+				if (check_dev_quirk(num, slot, func))
+					break;
+			}
 }
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 5b20a5e7ac28..a23e8233b9ac 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -96,7 +96,7 @@ int __init get_memcfg_numaq(void)
 void __init numaq_tsc_disable(void)
 {
 	if (!found_numaq)
-		return -1;
+		return;
 
 	if (num_online_nodes() > 1) {
 		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 7dceea947232..4d629c62f4f8 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -7,6 +7,12 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/clockchips.h>
+#include <asm/system.h>
+
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
 
@@ -325,7 +331,27 @@ static int __init idle_setup(char *str)
 		pm_idle = poll_idle;
 	} else if (!strcmp(str, "mwait"))
 		force_mwait = 1;
-	else
+	else if (!strcmp(str, "halt")) {
+		/*
+		 * When the boot option of idle=halt is added, halt is
+		 * forced to be used for CPU idle. In such case CPU C2/C3
+		 * won't be used again.
+		 * To continue to load the CPU idle driver, don't touch
+		 * the boot_option_idle_override.
+		 */
+		pm_idle = default_idle;
+		idle_halt = 1;
+		return 0;
+	} else if (!strcmp(str, "nomwait")) {
+		/*
+		 * If the boot option of "idle=nomwait" is added,
+		 * it means that mwait will be disabled for CPU C2/C3
+		 * states. In such case it won't touch the variable
+		 * of boot_option_idle_override.
+		 */
+		idle_nomwait = 1;
+		return 0;
+	} else
 		return -1;
 
 	boot_option_idle_override = 1;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 36c540d4ac4b..531b55b8e81a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -684,6 +684,11 @@ void __init setup_arch(char **cmdline_p)
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 	}
 
+#ifdef CONFIG_PCI
+	if (pci_early_dump_regs)
+		early_dump_pci_devices();
+#endif
+
 	finish_e820_parsing();
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 3c36f92160c9..7603c0553909 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -358,6 +358,7 @@ static cycle_t read_tsc(void)
 		ret : clocksource_tsc.cycle_last;
 }
 
+#ifdef CONFIG_X86_64
 static cycle_t __vsyscall_fn vread_tsc(void)
 {
 	cycle_t ret = (cycle_t)vget_cycles();
@@ -365,6 +366,7 @@ static cycle_t __vsyscall_fn vread_tsc(void)
 	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
 		ret : __vsyscall_gtod_data.clock.cycle_last;
 }
+#endif
 
 static struct clocksource clocksource_tsc = {
 	.name                   = "tsc",
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 27de2435e008..306049edd553 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -644,7 +644,7 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 		unsigned long pud_phys;
 		pud_t *pud;
 
-		next = start + PGDIR_SIZE;
+		next = (start + PGDIR_SIZE) & PGDIR_MASK;
 		if (next > end)
 			next = end;
 
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index f41d67f8f831..1eb2973a301c 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -156,10 +156,9 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
 
 	num_memory_chunks++;
 
-	printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)"
+	printk(KERN_DEBUG "Memory range %08lx to %08lx"
 			  " in proximity domain %02x %s\n",
 		start_pfn, end_pfn,
-		memory_affinity->memory_type,
 		pxm,
 		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
 		 "enabled and removable" : "enabled" ) );
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 20b9f59f95df..b67732bbb85a 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -20,6 +20,7 @@
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
+unsigned int pci_early_dump_regs;
 static int pci_bf_sort;
 int pci_routeirq;
 int pcibios_last_bus = -1;
@@ -31,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops;
 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
@@ -41,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
@@ -121,6 +122,21 @@ void __init dmi_check_skip_isa_align(void)
 	dmi_check_system(can_skip_pciprobe_dmi_table);
 }
 
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+
+	if (pci_probe & PCI_NOASSIGN_ROMS) {
+		if (rom_r->parent)
+			return;
+		if (rom_r->start) {
+			/* we deal with BIOS assigned ROM later */
+			return;
+		}
+		rom_r->start = rom_r->end = rom_r->flags = 0;
+	}
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -128,7 +144,11 @@ void __init dmi_check_skip_isa_align(void)
 
 void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 {
+	struct pci_dev *dev;
+
 	pci_read_bridge_bases(b);
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
 }
 
 /*
@@ -481,12 +501,18 @@ char * __devinit  pcibios_setup(char *str)
 	else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
+	} else if (!strcmp(str, "norom")) {
+		pci_probe |= PCI_NOASSIGN_ROMS;
+		return NULL;
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "earlydump")) {
+		pci_early_dump_regs = 1;
+		return NULL;
 	} else if (!strcmp(str, "routeirq")) {
 		pci_routeirq = 1;
 		return NULL;
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 42df4b6606df..858dbe3399f9 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -49,7 +49,14 @@ void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
 	PDprintk("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
-	outb(val, 0xcfc);
+	outb(val, 0xcfc + (offset&3));
+}
+
+void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
+{
+	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	outw(val, 0xcfc + (offset&2));
 }
 
 int early_pci_allowed(void)
@@ -57,3 +64,54 @@ int early_pci_allowed(void)
 	return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
 			PCI_PROBE_CONF1;
 }
+
+void early_dump_pci_device(u8 bus, u8 slot, u8 func)
+{
+	int i;
+	int j;
+	u32 val;
+
+	printk("PCI: %02x:%02x:%02x", bus, slot, func);
+
+	for (i = 0; i < 256; i += 4) {
+		if (!(i & 0x0f))
+			printk("\n%04x:",i);
+
+		val = read_pci_config(bus, slot, func, i);
+		for (j = 0; j < 4; j++) {
+			printk(" %02x", val & 0xff);
+			val >>= 8;
+		}
+	}
+	printk("\n");
+}
+
+void early_dump_pci_devices(void)
+{
+	unsigned bus, slot, func;
+
+	if (!early_pci_allowed())
+		return;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				u32 class;
+				u8 type;
+				class = read_pci_config(bus, slot, func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break;
+
+				early_dump_pci_device(bus, slot, func);
+
+				/* No multi-function device? */
+				type = read_pci_config_byte(bus, slot, func,
+							       PCI_HEADER_TYPE);
+				if (!(type & 0x80))
+					break;
+			}
+		}
+	}
+}
+
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index dc568c6b83f8..6a06a2eb0597 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -45,7 +45,8 @@ struct irq_router {
 	char *name;
 	u16 vendor, device;
 	int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
-	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+		int new);
 };
 
 struct irq_router_handler {
@@ -77,7 +78,8 @@ static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
 	for (i = 0; i < rt->size; i++)
 		sum += addr[i];
 	if (!sum) {
-		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+			rt);
 		return rt;
 	}
 	return NULL;
@@ -183,7 +185,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset,
 	return (nr & 1) ? (x >> 4) : (x & 0xf);
 }
 
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+	unsigned nr, unsigned int val)
 {
 	u8 x;
 	unsigned reg = offset + (nr >> 1);
@@ -467,7 +470,8 @@ static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int
 	return inb(0xc01) & 0xf;
 }
 
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+	int pirq, int irq)
 {
 	outb(pirq, 0xc00);
 	outb(irq, 0xc01);
@@ -660,7 +664,8 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router
 }
 
 
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+		struct pci_dev *router, u16 device)
 {
 	switch (device) {
 	case PCI_DEVICE_ID_SERVERWORKS_OSB4:
@@ -827,10 +832,12 @@ static void __init pirq_find_router(struct irq_router *r)
 
 	for (h = pirq_routers; h->vendor; h++) {
 		/* First look for a router match */
-		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+		if (rt->rtr_vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, rt->rtr_device))
 			break;
 		/* Fall back to a device match */
-		if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+		if (pirq_router_dev->vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
 	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
@@ -845,11 +852,13 @@ static void __init pirq_find_router(struct irq_router *r)
 static struct irq_info *pirq_get_info(struct pci_dev *dev)
 {
 	struct irq_routing_table *rt = pirq_table;
-	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	int entries = (rt->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info);
 	struct irq_info *info;
 
 	for (info = rt->slots; entries--; info++)
-		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+		if (info->bus == dev->bus->number &&
+			PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
 			return info;
 	return NULL;
 }
@@ -890,7 +899,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		DBG(" -> not routed\n" KERN_DEBUG);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
+		pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -903,7 +913,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	}
 
 	/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
-	if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+	if (acer_tm360_irqrouting && dev->irq == 11 &&
+		dev->vendor == PCI_VENDOR_ID_O2) {
 		pirq = 0x68;
 		mask = 0x400;
 		dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -920,15 +931,16 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			newirq = 0;
 		else
 			printk("\n" KERN_WARNING
-			"PCI: IRQ %i for device %s doesn't match PIRQ mask "
-			"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
-			pci_name(dev));
+				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
+				KERN_DEBUG, newirq,
+				pci_name(dev));
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
 				continue;
-			if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+			if (pirq_penalty[i] < pirq_penalty[newirq] &&
+				can_request_irq(i, IRQF_SHARED))
 				newirq = i;
 		}
 	}
@@ -944,7 +956,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		DBG(" -> got IRQ %d\n", irq);
 		msg = "Found";
 		eisa_set_level_irq(irq);
-	} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+	} else if (newirq && r->set &&
+		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
 		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
@@ -962,7 +975,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		} else
 			return 0;
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
+		pci_name(dev));
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -974,7 +988,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (!info)
 			continue;
 		if (info->irq[pin].link == pirq) {
-			/* We refuse to override the dev->irq information. Give a warning! */
+			/*
+			 * We refuse to override the dev->irq
+			 * information. Give a warning!
+			 */
 			if (dev2->irq && dev2->irq != irq && \
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
@@ -987,7 +1004,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+				printk(KERN_INFO
+					"PCI: Sharing IRQ %d with %s\n",
+					irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1001,15 +1020,21 @@ static void __init pcibios_fixup_irqs(void)
 	DBG(KERN_DEBUG "PCI: IRQ fixup\n");
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		/*
-		 * If the BIOS has set an out of range IRQ number, just ignore it.
-		 * Also keep track of which IRQ's are already in use.
+		 * If the BIOS has set an out of range IRQ number, just
+		 * ignore it.  Also keep track of which IRQ's are
+		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
+				pci_name(dev), dev->irq);
 			dev->irq = 0;
 		}
-		/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
-		if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+		/*
+		 * If the IRQ is already assigned to a PCI device,
+		 * ignore its ISA use penalty
+		 */
+		if (pirq_penalty[dev->irq] >= 100 &&
+				pirq_penalty[dev->irq] < 100000)
 			pirq_penalty[dev->irq] = 0;
 		pirq_penalty[dev->irq]++;
 	}
@@ -1025,8 +1050,13 @@ static void __init pcibios_fixup_irqs(void)
 			int irq;
 
 			if (pin) {
-				pin--;		/* interrupt pins are numbered starting from 1 */
-				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+				/*
+				 * interrupt pins are numbered starting
+				 * from 1
+				 */
+				pin--;
+				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+					PCI_SLOT(dev->devfn), pin);
 	/*
 	 * Busses behind bridges are typically not listed in the MP-table.
 	 * In this case we have to look up the IRQ based on the parent bus,
@@ -1067,7 +1097,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
 {
 	if (!broken_hp_bios_irq9) {
 		broken_hp_bios_irq9 = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1080,7 +1111,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
 {
 	if (!acer_tm360_irqrouting) {
 		acer_tm360_irqrouting = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1092,7 +1124,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,
+				"HP Pavilion Notebook Model GE"),
 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
@@ -1131,7 +1164,10 @@ int __init pcibios_irq_init(void)
 				if (!(pirq_table->exclusive_irqs & (1 << i)))
 					pirq_penalty[i] += 100;
 		}
-		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+		/*
+		 * If we're using the I/O APIC, avoid using the PCI IRQ
+		 * routing table
+		 */
 		if (io_apic_assign_pci_irqs)
 			pirq_table = NULL;
 	}
@@ -1175,7 +1211,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
 	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg = "";
 
-		pin--;		/* interrupt pins are numbered starting from 1 */
+		pin--; /* interrupt pins are numbered starting from 1 */
 
 		if (io_apic_assign_pci_irqs) {
 			int irq;
@@ -1195,13 +1231,16 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge), 'A' + pin, irq);
+					printk(KERN_WARNING
+						"PCI: using PPB %s[%c] to get irq %d\n",
+						pci_name(bridge),
+						'A' + pin, irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+				printk(KERN_INFO
+					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
 					pci_name(dev), 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
@@ -1212,12 +1251,17 @@ static int pirq_enable_irq(struct pci_dev *dev)
 		else
 			msg = " Please try using pci=biosirq.";
 
-		/* With IDE legacy devices the IRQ lookup failure is not a problem.. */
-		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+		/*
+		 * With IDE legacy devices the IRQ lookup failure is not
+		 * a problem..
+		 */
+		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-		       'A' + pin, pci_name(dev), msg);
+		printk(KERN_WARNING
+			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+			'A' + pin, pci_name(dev), msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index b2270a55b0cf..3e25deb821ac 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -28,6 +28,7 @@
 #define PCI_USE__CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
+#define PCI_NOASSIGN_ROMS	0x80000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;