diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/hwmon/lm85.c | 6 | ||||
| -rw-r--r-- | drivers/hwmon/lm90.c | 22 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus_core.c | 1 | ||||
| -rw-r--r-- | drivers/hwmon/twl4030-madc-hwmon.c | 3 |
5 files changed, 25 insertions, 18 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 060ef6327876..50e40dbd8bb6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -110,8 +110,7 @@ config SENSORS_ADM1021 help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. + Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. This driver can also be built as a module. If so, the module will be called adm1021. @@ -618,10 +617,10 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim - MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton - W83L771W/G/AWG/ASG sensor chips. + LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, + Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, + and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 250d099ca398..da72dc12068c 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1094,6 +1094,7 @@ static struct attribute *lm85_attributes_minctl[] = { &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_minctl = { @@ -1104,6 +1105,7 @@ static struct attribute *lm85_attributes_temp_off[] = { &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_temp_off = { @@ -1329,11 +1331,11 @@ static int lm85_probe(struct i2c_client *client, if (data->type != emc6d103s) { err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl); if (err) - goto err_kfree; + goto err_remove_files; err = sysfs_create_group(&client->dev.kobj, &lm85_group_temp_off); if (err) - goto err_kfree; + goto err_remove_files; } /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index c43b4e9f96a9..2f94f9504804 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -49,10 +49,10 @@ * chips, but support three temperature sensors instead of two. MAX6695 * and MAX6696 only differ in the pinout so they can be treated identically. * - * This driver also supports the ADT7461 chip from Analog Devices. - * It's supported in both compatibility and extended mode. It is mostly - * compatible with LM90 except for a data format difference for the - * temperature value registers. + * This driver also supports ADT7461 and ADT7461A from Analog Devices as well as + * NCT1008 from ON Semiconductor. The chips are supported in both compatibility + * and extended mode. They are mostly compatible with LM90 except for a data + * format difference for the temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -88,9 +88,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659, MAX6680 and MAX6681. - * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657, - * MAX6658 and W83L771 have address 0x4c. - * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, ADT7461A, MAX6649, + * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c. + * ADM1032-2, ADT7461-2, ADT7461A-2, LM89-1, LM99-1, MAX6646, and NCT1008D + * have address 0x4d. * MAX6647 has address 0x4e. * MAX6659 can have address 0x4c, 0x4d or 0x4e. * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, @@ -174,6 +175,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, static const struct i2c_device_id lm90_id[] = { { "adm1032", adm1032 }, { "adt7461", adt7461 }, + { "adt7461a", adt7461 }, { "lm90", lm90 }, { "lm86", lm86 }, { "lm89", lm86 }, @@ -188,6 +190,7 @@ static const struct i2c_device_id lm90_id[] = { { "max6681", max6680 }, { "max6695", max6696 }, { "max6696", max6696 }, + { "nct1008", adt7461 }, { "w83l771", w83l771 }, { } }; @@ -1153,6 +1156,11 @@ static int lm90_detect(struct i2c_client *new_client, && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { name = "adt7461"; + } else + if (chip_id == 0x57 /* ADT7461A, NCT1008 */ + && (reg_config1 & 0x1B) == 0x00 + && reg_convrate <= 0x0A) { + name = "adt7461a"; } } else if (man_id == 0x4D) { /* Maxim */ diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index edfb92e41735..196ffafafd88 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -139,7 +139,6 @@ struct pmbus_data { * A single status register covers multiple attributes, * so we keep them all together. */ - u8 status_bits; u8 status[PB_NUM_STATUS_REG]; u8 currpage; diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index de5819199e2e..57240740b161 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -98,7 +98,6 @@ static const struct attribute_group twl4030_madc_group = { static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) { int ret; - int status; struct device *hwmon; ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group); @@ -107,7 +106,7 @@ static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) hwmon = hwmon_device_register(&pdev->dev); if (IS_ERR(hwmon)) { dev_err(&pdev->dev, "hwmon_device_register failed.\n"); - status = PTR_ERR(hwmon); + ret = PTR_ERR(hwmon); goto err_reg; } |