diff options
Diffstat (limited to 'drivers/media/rc')
| -rw-r--r-- | drivers/media/rc/img-ir/img-ir-raw.c | 151 | ||||
| -rw-r--r-- | drivers/media/rc/img-ir/img-ir-raw.h | 60 |
2 files changed, 211 insertions, 0 deletions
diff --git a/drivers/media/rc/img-ir/img-ir-raw.c b/drivers/media/rc/img-ir/img-ir-raw.c new file mode 100644 index 000000000000..cfb01d9e571a --- /dev/null +++ b/drivers/media/rc/img-ir/img-ir-raw.c @@ -0,0 +1,151 @@ +/* + * ImgTec IR Raw Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This ties into the input subsystem using the RC-core in raw mode. Raw IR + * signal edges are reported and decoded by generic software decoders. + */ + +#include <linux/spinlock.h> +#include <media/rc-core.h> +#include "img-ir.h" + +#define ECHO_TIMEOUT_MS 150 /* ms between echos */ + +/* must be called with priv->lock held */ +static void img_ir_refresh_raw(struct img_ir_priv *priv, u32 irq_status) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rc_dev = priv->raw.rdev; + int multiple; + u32 ir_status; + + /* find whether both rise and fall was detected */ + multiple = ((irq_status & IMG_IR_IRQ_EDGE) == IMG_IR_IRQ_EDGE); + /* + * If so, we need to see if the level has actually changed. + * If it's just noise that we didn't have time to process, + * there's no point reporting it. + */ + ir_status = img_ir_read(priv, IMG_IR_STATUS) & IMG_IR_IRRXD; + if (multiple && ir_status == raw->last_status) + return; + raw->last_status = ir_status; + + /* report the edge to the IR raw decoders */ + if (ir_status) /* low */ + ir_raw_event_store_edge(rc_dev, IR_SPACE); + else /* high */ + ir_raw_event_store_edge(rc_dev, IR_PULSE); + ir_raw_event_handle(rc_dev); +} + +/* called with priv->lock held */ +void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status) +{ + struct img_ir_priv_raw *raw = &priv->raw; + + /* check not removing */ + if (!raw->rdev) + return; + + img_ir_refresh_raw(priv, irq_status); + + /* start / push back the echo timer */ + mod_timer(&raw->timer, jiffies + msecs_to_jiffies(ECHO_TIMEOUT_MS)); +} + +/* + * Echo timer callback function. + * The raw decoders expect to get a final sample even if there are no edges, in + * order to be assured of the final space. If there are no edges for a certain + * time we use this timer to emit a final sample to satisfy them. + */ +static void img_ir_echo_timer(unsigned long arg) +{ + struct img_ir_priv *priv = (struct img_ir_priv *)arg; + + spin_lock_irq(&priv->lock); + + /* check not removing */ + if (priv->raw.rdev) + /* + * It's safe to pass irq_status=0 since it's only used to check + * for double edges. + */ + img_ir_refresh_raw(priv, 0); + + spin_unlock_irq(&priv->lock); +} + +void img_ir_setup_raw(struct img_ir_priv *priv) +{ + u32 irq_en; + + if (!priv->raw.rdev) + return; + + /* clear and enable edge interrupts */ + spin_lock_irq(&priv->lock); + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + irq_en |= IMG_IR_IRQ_EDGE; + img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); + spin_unlock_irq(&priv->lock); +} + +int img_ir_probe_raw(struct img_ir_priv *priv) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rdev; + int error; + + /* Set up the echo timer */ + setup_timer(&raw->timer, img_ir_echo_timer, (unsigned long)priv); + + /* Allocate raw decoder */ + raw->rdev = rdev = rc_allocate_device(); + if (!rdev) { + dev_err(priv->dev, "cannot allocate raw input device\n"); + return -ENOMEM; + } + rdev->priv = priv; + rdev->map_name = RC_MAP_EMPTY; + rdev->input_name = "IMG Infrared Decoder Raw"; + rdev->driver_type = RC_DRIVER_IR_RAW; + + /* Register raw decoder */ + error = rc_register_device(rdev); + if (error) { + dev_err(priv->dev, "failed to register raw IR input device\n"); + rc_free_device(rdev); + raw->rdev = NULL; + return error; + } + + return 0; +} + +void img_ir_remove_raw(struct img_ir_priv *priv) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rdev = raw->rdev; + u32 irq_en; + + if (!rdev) + return; + + /* switch off and disable raw (edge) interrupts */ + spin_lock_irq(&priv->lock); + raw->rdev = NULL; + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + irq_en &= ~IMG_IR_IRQ_EDGE; + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); + img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE); + spin_unlock_irq(&priv->lock); + + rc_unregister_device(rdev); + + del_timer_sync(&raw->timer); +} diff --git a/drivers/media/rc/img-ir/img-ir-raw.h b/drivers/media/rc/img-ir/img-ir-raw.h new file mode 100644 index 000000000000..9802ffd51b9a --- /dev/null +++ b/drivers/media/rc/img-ir/img-ir-raw.h @@ -0,0 +1,60 @@ +/* + * ImgTec IR Raw Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + */ + +#ifndef _IMG_IR_RAW_H_ +#define _IMG_IR_RAW_H_ + +struct img_ir_priv; + +#ifdef CONFIG_IR_IMG_RAW + +/** + * struct img_ir_priv_raw - Private driver data for raw decoder. + * @rdev: Raw remote control device + * @timer: Timer to echo samples to keep soft decoders happy. + * @last_status: Last raw status bits. + */ +struct img_ir_priv_raw { + struct rc_dev *rdev; + struct timer_list timer; + u32 last_status; +}; + +static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw) +{ + return raw->rdev; +}; + +void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status); +void img_ir_setup_raw(struct img_ir_priv *priv); +int img_ir_probe_raw(struct img_ir_priv *priv); +void img_ir_remove_raw(struct img_ir_priv *priv); + +#else + +struct img_ir_priv_raw { +}; +static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw) +{ + return false; +}; +static inline void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status) +{ +} +static inline void img_ir_setup_raw(struct img_ir_priv *priv) +{ +} +static inline int img_ir_probe_raw(struct img_ir_priv *priv) +{ + return -ENODEV; +} +static inline void img_ir_remove_raw(struct img_ir_priv *priv) +{ +} + +#endif /* CONFIG_IR_IMG_RAW */ + +#endif /* _IMG_IR_RAW_H_ */ |