summaryrefslogtreecommitdiff
path: root/drivers/mtd/maps
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r--drivers/mtd/maps/Kconfig115
-rw-r--r--drivers/mtd/maps/Makefile7
-rw-r--r--drivers/mtd/maps/alchemy-flash.c12
-rw-r--r--drivers/mtd/maps/amd76xrom.c16
-rw-r--r--drivers/mtd/maps/arctic-mtd.c6
-rw-r--r--drivers/mtd/maps/autcpu12-nvram.c18
-rw-r--r--drivers/mtd/maps/bast-flash.c19
-rw-r--r--drivers/mtd/maps/beech-mtd.c6
-rw-r--r--drivers/mtd/maps/cdb89712.c34
-rw-r--r--drivers/mtd/maps/cfi_flagadm.c12
-rw-r--r--drivers/mtd/maps/cstm_mips_ixx.c24
-rw-r--r--drivers/mtd/maps/dbox2-flash.c38
-rw-r--r--drivers/mtd/maps/dc21285.c34
-rw-r--r--drivers/mtd/maps/dilnetpc.c32
-rw-r--r--drivers/mtd/maps/dmv182.c8
-rw-r--r--drivers/mtd/maps/ebony.c6
-rw-r--r--drivers/mtd/maps/edb7312.c10
-rw-r--r--drivers/mtd/maps/epxa10db-flash.c12
-rw-r--r--drivers/mtd/maps/fortunet.c4
-rw-r--r--drivers/mtd/maps/h720x-flash.c16
-rw-r--r--drivers/mtd/maps/ichxrom.c16
-rw-r--r--drivers/mtd/maps/impa7.c16
-rw-r--r--drivers/mtd/maps/integrator-flash.c14
-rw-r--r--drivers/mtd/maps/ipaq-flash.c34
-rw-r--r--drivers/mtd/maps/iq80310.c4
-rw-r--r--drivers/mtd/maps/ixp2000.c32
-rw-r--r--drivers/mtd/maps/ixp4xx.c53
-rw-r--r--drivers/mtd/maps/l440gx.c18
-rw-r--r--drivers/mtd/maps/lubbock-flash.c14
-rw-r--r--drivers/mtd/maps/mainstone-flash.c22
-rw-r--r--drivers/mtd/maps/mbx860.c6
-rw-r--r--drivers/mtd/maps/mtx-1_flash.c96
-rw-r--r--drivers/mtd/maps/netsc520.c32
-rw-r--r--drivers/mtd/maps/nettel.c8
-rw-r--r--drivers/mtd/maps/ocelot.c10
-rw-r--r--drivers/mtd/maps/octagon-5066.c36
-rw-r--r--drivers/mtd/maps/omap-toto-flash.c20
-rw-r--r--drivers/mtd/maps/omap_nor.c2
-rw-r--r--drivers/mtd/maps/pci.c6
-rw-r--r--drivers/mtd/maps/pcmciamtd.c30
-rw-r--r--drivers/mtd/maps/physmap.c8
-rw-r--r--drivers/mtd/maps/plat-ram.c13
-rw-r--r--drivers/mtd/maps/pnc2000.c8
-rw-r--r--drivers/mtd/maps/pq2fads.c88
-rw-r--r--drivers/mtd/maps/redwood.c4
-rw-r--r--drivers/mtd/maps/sa1100-flash.c6
-rw-r--r--drivers/mtd/maps/sbc8240.c4
-rw-r--r--drivers/mtd/maps/sbc_gxx.c46
-rw-r--r--drivers/mtd/maps/sc520cdp.c6
-rw-r--r--drivers/mtd/maps/scx200_docflash.c46
-rw-r--r--drivers/mtd/maps/sharpsl-flash.c12
-rw-r--r--drivers/mtd/maps/solutionengine.c4
-rw-r--r--drivers/mtd/maps/sun_uflash.c12
-rw-r--r--drivers/mtd/maps/tqm834x.c291
-rw-r--r--drivers/mtd/maps/tqm8xxl.c20
-rw-r--r--drivers/mtd/maps/ts5500_flash.c44
-rw-r--r--drivers/mtd/maps/tsunami_flash.c6
-rw-r--r--drivers/mtd/maps/uclinux.c4
-rw-r--r--drivers/mtd/maps/vmax301.c24
-rw-r--r--drivers/mtd/maps/walnut.c16
-rw-r--r--drivers/mtd/maps/wr_sbc82xx_flash.c6
61 files changed, 1017 insertions, 549 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 44781a83b2e7..48638c8097a5 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,5 @@
# drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $
+# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
menu "Mapping drivers for chip access"
depends on MTD!=n
@@ -64,9 +64,9 @@ config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
depends on (SPARC32 || SPARC64) && MTD_CFI
help
- This provides a 'mapping' driver which supports the way in
- which user-programmable flash chips are connected on various
- Sun Microsystems boardsets. This driver will require CFI support
+ This provides a 'mapping' driver which supports the way in
+ which user-programmable flash chips are connected on various
+ Sun Microsystems boardsets. This driver will require CFI support
in the kernel, so if you did not enable CFI previously, do that now.
config MTD_PNC2000
@@ -89,22 +89,22 @@ config MTD_NETSC520
depends on X86 && MTD_CFI && MTD_PARTITIONS
help
This enables access routines for the flash chips on the AMD NetSc520
- demonstration board. If you have one of these boards and would like
+ demonstration board. If you have one of these boards and would like
to use the flash chips on it, say 'Y'.
config MTD_TS5500
tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
- depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS
+ depends on ELAN
+ select MTD_PARTITIONS
+ select MTD_JEDECPROBE
+ select MTD_CFI_AMDSTD
help
This provides a driver for the on-board flash of the Technologic
- System's TS-5500 board. The flash is split into 3 partitions
+ System's TS-5500 board. The 2MB flash is split into 3 partitions
which are accessed as separate MTD devices.
- mtd0 and mtd2 are the two BIOS drives. Unfortunately the BIOS
- uses a proprietary flash translation layer from General Software,
- which is not supported (the drives cannot be mounted). You can
- create your own file system (jffs for example), but the BIOS
- won't be able to boot from it.
+ mtd0 and mtd2 are the two BIOS drives, which use the resident
+ flash disk (RFD) flash translation layer.
mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
@@ -212,11 +212,18 @@ config MTD_NETtel
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
config MTD_ALCHEMY
- tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
- depends on MIPS && SOC_AU1X00
+ tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
+ depends on SOC_AU1X00
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+config MTD_MTX1
+ tristate "4G Systems MTX-1 Flash device"
+ depends on MIPS && MIPS_MTX1
+ help
+ Flash memory access on 4G Systems MTX-1 Board. If you have one of
+ these boards and would like to use the flash chips on it, say 'Y'.
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
@@ -244,14 +251,14 @@ config MTD_L440GX
config MTD_SBC8240
tristate "Flash device on SBC8240"
- depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+ depends on MTD_JEDECPROBE && 8260
help
Flash access on the SBC8240 board from Wind River. See
<http://www.windriver.com/products/sbc8240/>
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
- depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
+ depends on MTD_CFI && TQM8xxL
help
The TQM8xxL PowerPC board has up to two banks of CFI-compliant
chips, currently uses AMD one. This 'mapping' driver supports
@@ -261,7 +268,7 @@ config MTD_TQM8XXL
config MTD_RPXLITE
tristate "CFI Flash device mapped on RPX Lite or CLLF"
- depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE)
+ depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
help
The RPXLite PowerPC board has CFI-compliant chips mapped in
a strange sparse mapping. This 'mapping' driver supports that
@@ -271,7 +278,7 @@ config MTD_RPXLITE
config MTD_MBX860
tristate "System flash on MBX860 board"
- depends on MTD_CFI && PPC32 && 8xx && MBX
+ depends on MTD_CFI && MBX
help
This enables access routines for the flash chips on the Motorola
MBX860 board. If you have one of these boards and would like
@@ -279,7 +286,7 @@ config MTD_MBX860
config MTD_DBOX2
tristate "CFI Flash device mapped on D-Box2"
- depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+ depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
help
This enables access routines for the flash chips on the Nokia/Sagem
D-Box 2 board. If you have one of these boards and would like to use
@@ -287,14 +294,14 @@ config MTD_DBOX2
config MTD_CFI_FLAGADM
tristate "CFI Flash device mapping on FlagaDM"
- depends on PPC32 && 8xx && MTD_CFI
+ depends on 8xx && MTD_CFI
help
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
config MTD_BEECH
tristate "CFI Flash device mapped on IBM 405LP Beech"
- depends on MTD_CFI && PPC32 && 40x && BEECH
+ depends on MTD_CFI && BEECH
help
This enables access routines for the flash chips on the IBM
405LP Beech board. If you have one of these boards and would like
@@ -302,7 +309,7 @@ config MTD_BEECH
config MTD_ARCTIC
tristate "CFI Flash device mapped on IBM 405LP Arctic"
- depends on MTD_CFI && PPC32 && 40x && ARCTIC2
+ depends on MTD_CFI && ARCTIC2
help
This enables access routines for the flash chips on the IBM 405LP
Arctic board. If you have one of these boards and would like to
@@ -310,7 +317,7 @@ config MTD_ARCTIC
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
- depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT
+ depends on MTD_JEDECPROBE && WALNUT
help
This enables access routines for the flash chips on the IBM 405GP
Walnut board. If you have one of these boards and would like to
@@ -318,7 +325,7 @@ config MTD_WALNUT
config MTD_EBONY
tristate "Flash devices mapped on IBM 440GP Ebony"
- depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY
+ depends on MTD_JEDECPROBE && EBONY
help
This enables access routines for the flash chips on the IBM 440GP
Ebony board. If you have one of these boards and would like to
@@ -326,7 +333,7 @@ config MTD_EBONY
config MTD_OCOTEA
tristate "Flash devices mapped on IBM 440GX Ocotea"
- depends on MTD_CFI && PPC32 && 44x && OCOTEA
+ depends on MTD_CFI && OCOTEA
help
This enables access routines for the flash chips on the IBM 440GX
Ocotea board. If you have one of these boards and would like to
@@ -334,12 +341,20 @@ config MTD_OCOTEA
config MTD_REDWOOD
tristate "CFI Flash devices mapped on IBM Redwood"
- depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+ depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
help
This enables access routines for the flash chips on the IBM
Redwood board. If you have one of these boards and would like to
use the flash chips on it, say 'Y'.
+config MTD_TQM834x
+ tristate "Flash device mapped on TQ Components TQM834x Boards"
+ depends on MTD_CFI && TQM834x
+ help
+ This enables access routines for the flash chips on the
+ TQ Components TQM834x boards. If you have one of these boards
+ and would like to use the flash chips on it, say 'Y'.
+
config MTD_CSTM_MIPS_IXX
tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
@@ -362,8 +377,8 @@ config MTD_CSTM_MIPS_IXX_START
default "0x8000000"
help
This is the physical memory location that the MTD driver will
- use for the flash chips on your particular target board.
- Refer to the memory map which should hopefully be in the
+ use for the flash chips on your particular target board.
+ Refer to the memory map which should hopefully be in the
documentation for your board.
config MTD_CSTM_MIPS_IXX_LEN
@@ -371,7 +386,7 @@ config MTD_CSTM_MIPS_IXX_LEN
depends on MTD_CSTM_MIPS_IXX
default "0x4000000"
help
- This is the total length that the MTD driver will use for the
+ This is the total length that the MTD driver will use for the
flash chips on your particular board. Refer to the memory
map which should hopefully be in the documentation for your
board.
@@ -405,14 +420,14 @@ config MTD_ARM_INTEGRATOR
config MTD_CDB89712
tristate "Cirrus CDB89712 evaluation board mappings"
- depends on ARM && MTD_CFI && ARCH_CDB89712
+ depends on MTD_CFI && ARCH_CDB89712
help
This enables access to the flash or ROM chips on the CDB89712 board.
If you have such a board, say 'Y'.
config MTD_SA1100
tristate "CFI Flash device mapped on StrongARM SA11x0"
- depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
+ depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
help
This enables access to the flash chips on most platforms based on
the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
@@ -420,13 +435,13 @@ config MTD_SA1100
config MTD_IPAQ
tristate "CFI Flash device mapped on Compaq/HP iPAQ"
- depends on ARM && IPAQ_HANDHELD && MTD_CFI
+ depends on IPAQ_HANDHELD && MTD_CFI
help
This provides a driver for the on-board flash of the iPAQ.
config MTD_DC21285
tristate "CFI Flash device mapped on DC21285 Footbridge"
- depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
+ depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
help
This provides a driver for the flash accessed using Intel's
21285 bridge used with Intel's StrongARM processors. More info at
@@ -434,33 +449,33 @@ config MTD_DC21285
config MTD_IQ80310
tristate "CFI Flash device mapped on the XScale IQ80310 board"
- depends on ARM && MTD_CFI && ARCH_IQ80310
+ depends on MTD_CFI && ARCH_IQ80310
help
This enables access routines for the flash chips on the Intel XScale
- IQ80310 evaluation board. If you have one of these boards and would
+ IQ80310 evaluation board. If you have one of these boards and would
like to use the flash chips on it, say 'Y'.
config MTD_IXP4XX
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
- depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
+ depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
help
- This enables MTD access to flash devices on platforms based
+ This enables MTD access to flash devices on platforms based
on Intel's IXP4xx family of network processors such as the
IXDP425 and Coyote. If you have an IXP4xx based board and
would like to use the flash chips on it, say 'Y'.
config MTD_IXP2000
tristate "CFI Flash device mapped on Intel IXP2000 based systems"
- depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
+ depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
help
- This enables MTD access to flash devices on platforms based
+ This enables MTD access to flash devices on platforms based
on Intel's IXP2000 family of network processors such as the
IXDP425 and Coyote. If you have an IXP2000 based board and
would like to use the flash chips on it, say 'Y'.
config MTD_EPXA10DB
tristate "CFI Flash device mapped on Epxa10db"
- depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
+ depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
help
This enables support for the flash devices on the Altera
Excalibur XA10 Development Board. If you are building a kernel
@@ -468,21 +483,21 @@ config MTD_EPXA10DB
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
- depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+ depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
help
This enables access to the Flash on the FortuNet board. If you
have such a board, say 'Y'.
config MTD_AUTCPU12
tristate "NV-RAM mapping AUTCPU12 board"
- depends on ARM && ARCH_AUTCPU12
+ depends on ARCH_AUTCPU12
help
This enables access to the NV-RAM on autronix autcpu12 board.
If you have such a board, say 'Y'.
config MTD_EDB7312
tristate "CFI Flash device mapped on EDB7312"
- depends on ARM && MTD_CFI
+ depends on ARCH_EDB7312 && MTD_CFI
help
This enables access to the CFI Flash on the Cogent EDB7312 board.
If you have such a board, say 'Y' here.
@@ -496,7 +511,7 @@ config MTD_IMPA7
config MTD_CEIVA
tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
- depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA
+ depends on MTD_JEDECPROBE && ARCH_CEIVA
help
This enables access to the flash chips on the Ceiva/Polaroid
PhotoMax Digital Picture Frame.
@@ -504,25 +519,31 @@ config MTD_CEIVA
config MTD_NOR_TOTO
tristate "NOR Flash device on TOTO board"
- depends on ARM && ARCH_OMAP && OMAP_TOTO
+ depends on ARCH_OMAP && OMAP_TOTO
help
This enables access to the NOR flash on the Texas Instruments
TOTO board.
config MTD_H720X
tristate "Hynix evaluation board mappings"
- depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
+ depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
help
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
config MTD_MPC1211
tristate "CFI Flash device mapped on Interface MPC-1211"
- depends on SUPERH && SH_MPC1211 && MTD_CFI
+ depends on SH_MPC1211 && MTD_CFI
help
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
+config MTD_PQ2FADS
+ tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
+ depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
+ help
+ This enables access to flash SIMM on PQ2FADS-like boards
+
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 7bcbc49e329f..7d9e940a1dcd 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,7 @@
#
# linux/drivers/maps/Makefile
#
-# $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $
+# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
obj-$(CONFIG_MTD) += map_funcs.o
@@ -26,7 +26,7 @@ obj-$(CONFIG_MTD_MAINSTONE) += mainstone-flash.o
obj-$(CONFIG_MTD_MBX860) += mbx860.o
obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
-obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
+obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PNC2000) += pnc2000.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
@@ -70,3 +70,6 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+obj-$(CONFIG_MTD_PQ2FADS) += pq2fads.o
+obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
+obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
index 27fd2a3c3b60..a57791a6ce40 100644
--- a/drivers/mtd/maps/alchemy-flash.c
+++ b/drivers/mtd/maps/alchemy-flash.c
@@ -1,10 +1,10 @@
/*
* Flash memory access on AMD Alchemy evaluation boards
- *
- * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $
+ *
+ * $Id: alchemy-flash.c,v 1.2 2005/11/07 11:14:26 gleixner Exp $
*
* (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- *
+ *
*/
#include <linux/config.h>
@@ -22,7 +22,7 @@
#ifdef DEBUG_RW
#define DBG(x...) printk(x)
#else
-#define DBG(x...)
+#define DBG(x...)
#endif
#ifdef CONFIG_MIPS_PB1000
@@ -136,7 +136,7 @@ int __init alchemy_mtd_init(void)
int nb_parts = 0;
unsigned long window_addr;
unsigned long window_size;
-
+
/* Default flash buswidth */
alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
@@ -161,7 +161,7 @@ int __init alchemy_mtd_init(void)
* Now let's probe for the actual flash. Do it here since
* specific machine settings might have been set above.
*/
- printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
+ printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
alchemy_map.bankwidth*8);
alchemy_map.virt = ioremap(window_addr, window_size);
mymtd = do_map_probe("cfi_probe", &alchemy_map);
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 9a64149f431d..c350878d4592 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,7 @@
* amd76xrom.c
*
* Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.20 2005/03/18 14:04:35 gleixner Exp $
+ * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
*/
#include <linux/module.h>
@@ -70,7 +70,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window)
list_del(&map->list);
kfree(map);
}
- if (window->rsrc.parent)
+ if (window->rsrc.parent)
release_resource(&window->rsrc);
if (window->virt) {
@@ -107,7 +107,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
window->phys = 0xffff0000; /* 64KiB */
}
window->size = 0xffffffffUL - window->phys + 1UL;
-
+
/*
* Try to reserve the window mem region. If this fails then
* it is likely due to a fragment of the window being
@@ -138,7 +138,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
/* Enable writes through the rom window */
pci_read_config_byte(pdev, 0x40, &byte);
pci_write_config_byte(pdev, 0x40, byte | 1);
-
+
/* FIXME handle registers 0x80 - 0x8C the bios region locks */
/* For write accesses caches are useless */
@@ -186,7 +186,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
MOD_NAME, map->map.phys);
/* There is no generic VPP support */
- for(map->map.bankwidth = 32; map->map.bankwidth;
+ for(map->map.bankwidth = 32; map->map.bankwidth;
map->map.bankwidth >>= 1)
{
char **probe_type;
@@ -239,7 +239,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
for(i = 0; i < cfi->numchips; i++) {
cfi->chips[i].start += offset;
}
-
+
/* Now that the mtd devices is complete claim and export it */
map->mtd->owner = THIS_MODULE;
if (add_mtd_device(map->mtd)) {
@@ -277,9 +277,9 @@ static void __devexit amd76xrom_remove_one (struct pci_dev *pdev)
}
static struct pci_device_id amd76xrom_pci_tbl[] = {
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410,
PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */
{ 0, }
diff --git a/drivers/mtd/maps/arctic-mtd.c b/drivers/mtd/maps/arctic-mtd.c
index 777276fd0e15..d95ae582fbe9 100644
--- a/drivers/mtd/maps/arctic-mtd.c
+++ b/drivers/mtd/maps/arctic-mtd.c
@@ -1,7 +1,7 @@
/*
- * $Id: arctic-mtd.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
- *
- * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for
+ * $Id: arctic-mtd.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
+ *
+ * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for
* IBM 405LP Arctic boards.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index cf362ccc3c8e..7ed3424dd959 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -1,8 +1,8 @@
/*
- * NV-RAM memory access on autcpu12
+ * NV-RAM memory access on autcpu12
* (C) 2002 Thomas Gleixner (gleixner@autronix.de)
*
- * $Id: autcpu12-nvram.c,v 1.8 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -55,10 +55,10 @@ static int __init init_autcpu12_sram (void)
}
simple_map_init(&autcpu_sram_map);
- /*
- * Check for 32K/128K
- * read ofs 0
- * read ofs 0x10000
+ /*
+ * Check for 32K/128K
+ * read ofs 0
+ * read ofs 0x10000
* Write complement to ofs 0x100000
* Read and check result on ofs 0x0
* Restore contents
@@ -66,7 +66,7 @@ static int __init init_autcpu12_sram (void)
save0 = map_read32(&autcpu12_sram_map,0);
save1 = map_read32(&autcpu12_sram_map,0x10000);
map_write32(&autcpu12_sram_map,~save0,0x10000);
- /* if we find this pattern on 0x0, we have 32K size
+ /* if we find this pattern on 0x0, we have 32K size
* restore contents and exit
*/
if ( map_read32(&autcpu12_sram_map,0) != save0) {
@@ -89,7 +89,7 @@ map:
sram_mtd->owner = THIS_MODULE;
sram_mtd->erasesize = 16;
-
+
if (add_mtd_device(sram_mtd)) {
printk("NV-RAM device addition failed\n");
err = -ENOMEM;
@@ -97,7 +97,7 @@ map:
}
printk("NV-RAM device size %ldKiB registered on AUTCPU12\n",autcpu12_sram_map.size/SZ_1K);
-
+
return 0;
out_probe:
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 8c19d722ac79..b7858eb93534 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -9,7 +9,7 @@
* 20-Sep-2004 BJD Initial version
* 17-Jan-2005 BJD Add whole device if no partitions found
*
- * $Id: bast-flash.c,v 1.2 2005/01/18 11:13:47 bjd Exp $
+ * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -75,7 +75,7 @@ static void bast_flash_setrw(int to)
local_irq_save(flags);
val = __raw_readb(BAST_VA_CTRL3);
-
+
if (to)
val |= BAST_CPLD_CTRL3_ROMWEN;
else
@@ -93,7 +93,7 @@ static int bast_flash_remove(struct device *dev)
dev_set_drvdata(dev, NULL);
- if (info == NULL)
+ if (info == NULL)
return 0;
if (info->map.virt != NULL)
@@ -110,7 +110,7 @@ static int bast_flash_remove(struct device *dev)
release_resource(info->area);
kfree(info->area);
}
-
+
kfree(info);
return 0;
@@ -137,15 +137,15 @@ static int bast_flash_probe(struct device *dev)
info->map.phys = res->start;
info->map.size = res->end - res->start + 1;
- info->map.name = dev->bus_id;
+ info->map.name = dev->bus_id;
info->map.bankwidth = 2;
-
+
if (info->map.size > AREA_MAXSIZE)
info->map.size = AREA_MAXSIZE;
pr_debug("%s: area %08lx, size %ld\n", __FUNCTION__,
info->map.phys, info->map.size);
-
+
info->area = request_mem_region(res->start, info->map.size,
pdev->name);
if (info->area == NULL) {
@@ -162,7 +162,7 @@ static int bast_flash_probe(struct device *dev)
err = -EIO;
goto exit_error;
}
-
+
simple_map_init(&info->map);
/* enable the write to the flash area */
@@ -187,7 +187,7 @@ static int bast_flash_probe(struct device *dev)
err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
if (err > 0) {
err = add_mtd_partitions(info->mtd, info->partitions, err);
- if (err)
+ if (err)
printk(KERN_ERR PFX "cannot add/parse partitions\n");
} else {
err = add_mtd_device(info->mtd);
@@ -205,6 +205,7 @@ static int bast_flash_probe(struct device *dev)
static struct device_driver bast_flash_driver = {
.name = "bast-nor",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = bast_flash_probe,
.remove = bast_flash_remove,
diff --git a/drivers/mtd/maps/beech-mtd.c b/drivers/mtd/maps/beech-mtd.c
index 5e79c9d5da2b..5df7361d1407 100644
--- a/drivers/mtd/maps/beech-mtd.c
+++ b/drivers/mtd/maps/beech-mtd.c
@@ -1,7 +1,7 @@
/*
- * $Id: beech-mtd.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
- *
- * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for
+ * $Id: beech-mtd.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
+ *
+ * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for
* IBM 405LP Beech boards.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index ab15dac2f936..9f17bb6c5a9d 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,7 @@
/*
* Flash on Cirrus CDB89712
*
- * $Id: cdb89712.c,v 1.10 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
*/
#include <linux/module.h>
@@ -37,13 +37,13 @@ struct resource cdb89712_flash_resource = {
static int __init init_cdb89712_flash (void)
{
int err;
-
+
if (request_resource (&ioport_resource, &cdb89712_flash_resource)) {
printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n");
err = -EBUSY;
goto out;
}
-
+
cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE);
if (!cdb89712_flash_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n");
@@ -64,13 +64,13 @@ static int __init init_cdb89712_flash (void)
}
flash_mtd->owner = THIS_MODULE;
-
+
if (add_mtd_device(flash_mtd)) {
printk("FLASH device addition failed\n");
err = -ENOMEM;
goto out_probe;
}
-
+
return 0;
out_probe:
@@ -107,13 +107,13 @@ struct resource cdb89712_sram_resource = {
static int __init init_cdb89712_sram (void)
{
int err;
-
+
if (request_resource (&ioport_resource, &cdb89712_sram_resource)) {
printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n");
err = -EBUSY;
goto out;
}
-
+
cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE);
if (!cdb89712_sram_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n");
@@ -130,13 +130,13 @@ static int __init init_cdb89712_sram (void)
sram_mtd->owner = THIS_MODULE;
sram_mtd->erasesize = 16;
-
+
if (add_mtd_device(sram_mtd)) {
printk("SRAM device addition failed\n");
err = -ENOMEM;
goto out_probe;
}
-
+
return 0;
out_probe:
@@ -175,13 +175,13 @@ struct resource cdb89712_bootrom_resource = {
static int __init init_cdb89712_bootrom (void)
{
int err;
-
+
if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) {
printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n");
err = -EBUSY;
goto out;
}
-
+
cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE);
if (!cdb89712_bootrom_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n");
@@ -198,13 +198,13 @@ static int __init init_cdb89712_bootrom (void)
bootrom_mtd->owner = THIS_MODULE;
bootrom_mtd->erasesize = 0x10000;
-
+
if (add_mtd_device(bootrom_mtd)) {
printk("BootROM device addition failed\n");
err = -ENOMEM;
goto out_probe;
}
-
+
return 0;
out_probe:
@@ -225,16 +225,16 @@ out:
static int __init init_cdb89712_maps(void)
{
- printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n Flash 0x%x at 0x%x\n SRAM 0x%x at 0x%x\n BootROM 0x%x at 0x%x\n",
+ printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n Flash 0x%x at 0x%x\n SRAM 0x%x at 0x%x\n BootROM 0x%x at 0x%x\n",
FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START);
init_cdb89712_flash();
init_cdb89712_sram();
init_cdb89712_bootrom();
-
+
return 0;
}
-
+
static void __exit cleanup_cdb89712_maps(void)
{
@@ -244,7 +244,7 @@ static void __exit cleanup_cdb89712_maps(void)
iounmap((void *)cdb89712_sram_map.virt);
release_resource (&cdb89712_sram_resource);
}
-
+
if (flash_mtd) {
del_mtd_device(flash_mtd);
map_destroy(flash_mtd);
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index f72e4f894b32..6a8c0415bde8 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,8 @@
/*
* Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
*
- * $Id: cfi_flagadm.c,v 1.14 2004/11/04 13:24:14 gleixner Exp $
- *
+ * $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -42,7 +42,7 @@
*/
#define FLASH_PHYS_ADDR 0x40000000
-#define FLASH_SIZE 0x400000
+#define FLASH_SIZE 0x400000
#define FLASH_PARTITION0_ADDR 0x00000000
#define FLASH_PARTITION0_SIZE 0x00020000
@@ -79,7 +79,7 @@ struct mtd_partition flagadm_parts[] = {
.offset = FLASH_PARTITION2_ADDR,
.size = FLASH_PARTITION2_SIZE
},
- {
+ {
.name = "Persistant storage",
.offset = FLASH_PARTITION3_ADDR,
.size = FLASH_PARTITION3_SIZE
@@ -91,10 +91,10 @@ struct mtd_partition flagadm_parts[] = {
static struct mtd_info *mymtd;
int __init init_flagadm(void)
-{
+{
printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n",
FLASH_SIZE, FLASH_PHYS_ADDR);
-
+
flagadm_map.phys = FLASH_PHYS_ADDR;
flagadm_map.virt = ioremap(FLASH_PHYS_ADDR,
FLASH_SIZE);
diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c
index ae9252fbf176..a370953c1513 100644
--- a/drivers/mtd/maps/cstm_mips_ixx.c
+++ b/drivers/mtd/maps/cstm_mips_ixx.c
@@ -1,10 +1,10 @@
/*
- * $Id: cstm_mips_ixx.c,v 1.12 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
*
* Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
* Config with both CFI and JEDEC device support.
*
- * Basically physmap.c with the addition of partitions and
+ * Basically physmap.c with the addition of partitions and
* an array of mapping info to accomodate more than one flash type per board.
*
* Copyright 2000 MontaVista Software Inc.
@@ -69,7 +69,7 @@ void cstm_mips_ixx_set_vpp(struct map_info *map,int vpp)
__u16 data;
__u8 data1;
static u8 first = 1;
-
+
// Set GPIO port B pin3 to high
data = *(__u16 *)(CC_GPBCR);
data = (data & 0xff0f) | 0x0040;
@@ -85,7 +85,7 @@ void cstm_mips_ixx_set_vpp(struct map_info *map,int vpp)
} else {
if (!--vpp_count) {
__u16 data;
-
+
// Set GPIO port B pin3 to high
data = *(__u16 *)(CC_GPBCR);
data = (data & 0xff3f) | 0x0040;
@@ -109,8 +109,8 @@ struct cstm_mips_ixx_info {
};
#if defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR)
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
+#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
+const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
{
{ // 28F128J3A in 2x16 configuration
"big flash", // name
@@ -131,10 +131,10 @@ static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP
},
};
#else /* defined(CONFIG_MIPS_ITE8172) || defined(CONFIG_MIPS_IVR) */
-#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
+#define PHYSMAP_NUMBER 1 // number of board desc structs needed, one per contiguous flash type
+const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
{
- {
+ {
"MTD flash", // name
CONFIG_MTD_CSTM_MIPS_IXX_START, // window_addr
CONFIG_MTD_CSTM_MIPS_IXX_LEN, // window_size
@@ -144,7 +144,7 @@ const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
};
static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{
+{
{
.name = "main partition",
.size = CONFIG_MTD_CSTM_MIPS_IXX_LEN,
@@ -165,7 +165,7 @@ int __init init_cstm_mips_ixx(void)
/* Initialize mapping */
for (i=0;i<PHYSMAP_NUMBER;i++) {
- printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
+ printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
@@ -235,7 +235,7 @@ void PCISetULongByOffset(__u32 DevNumber, __u32 FuncNumber, __u32 Offset, __u32
offset = ( unsigned long )( 0x80000000 | ( DevNumber << 11 ) + ( FuncNumber << 8 ) + Offset) ;
- *(__u32 *)CC_CONFADDR = offset;
+ *(__u32 *)CC_CONFADDR = offset;
*(__u32 *)CC_CONFDATA = data;
}
void setup_ITE_IVR_flash()
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index d850a27a4b59..49d90542fc75 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -1,5 +1,5 @@
/*
- * $Id: dbox2-flash.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: dbox2-flash.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
*
* D-Box 2 flash driver
*/
@@ -21,38 +21,38 @@
static struct mtd_partition partition_info[]= {
{
.name = "BR bootloader",
- .size = 128 * 1024,
- .offset = 0,
+ .size = 128 * 1024,
+ .offset = 0,
.mask_flags = MTD_WRITEABLE
},
{
.name = "FLFS (U-Boot)",
- .size = 128 * 1024,
- .offset = MTDPART_OFS_APPEND,
+ .size = 128 * 1024,
+ .offset = MTDPART_OFS_APPEND,
.mask_flags = 0
},
{
- .name = "Root (SquashFS)",
- .size = 7040 * 1024,
- .offset = MTDPART_OFS_APPEND,
+ .name = "Root (SquashFS)",
+ .size = 7040 * 1024,
+ .offset = MTDPART_OFS_APPEND,
.mask_flags = 0
},
{
.name = "var (JFFS2)",
- .size = 896 * 1024,
- .offset = MTDPART_OFS_APPEND,
+ .size = 896 * 1024,
+ .offset = MTDPART_OFS_APPEND,
.mask_flags = 0
},
{
- .name = "Flash without bootloader",
- .size = MTDPART_SIZ_FULL,
- .offset = 128 * 1024,
+ .name = "Flash without bootloader",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 128 * 1024,
.mask_flags = 0
},
{
- .name = "Complete Flash",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
+ .name = "Complete Flash",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
.mask_flags = MTD_WRITEABLE
}
};
@@ -88,16 +88,16 @@ int __init init_dbox2_flash(void)
if (!mymtd) {
// Probe for single Intel 28F640
dbox2_flash_map.bankwidth = 2;
-
+
mymtd = do_map_probe("cfi_probe", &dbox2_flash_map);
}
-
+
if (mymtd) {
mymtd->owner = THIS_MODULE;
/* Create MTD devices for each partition. */
add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
-
+
return 0;
}
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index e5b74169fde6..701620b6baed 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -4,8 +4,8 @@
* (C) 2000 Nicolas Pitre <nico@cam.org>
*
* This code is GPL
- *
- * $Id: dc21285.c,v 1.22 2004/11/01 13:39:21 rmk Exp $
+ *
+ * $Id: dc21285.c,v 1.24 2005/11/07 11:14:26 gleixner Exp $
*/
#include <linux/config.h>
#include <linux/module.h>
@@ -27,9 +27,9 @@
static struct mtd_info *dc21285_mtd;
#ifdef CONFIG_ARCH_NETWINDER
-/*
+/*
* This is really ugly, but it seams to be the only
- * realiable way to do it, as the cpld state machine
+ * realiable way to do it, as the cpld state machine
* is unpredictible. So we have a 25us penalty per
* write access.
*/
@@ -150,7 +150,7 @@ static struct map_info dc21285_map = {
static struct mtd_partition *dc21285_parts;
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
#endif
-
+
static int __init init_dc21285(void)
{
@@ -160,20 +160,20 @@ static int __init init_dc21285(void)
/* Determine bankwidth */
switch (*CSR_SA110_CNTL & (3<<14)) {
- case SA110_CNTL_ROMWIDTH_8:
+ case SA110_CNTL_ROMWIDTH_8:
dc21285_map.bankwidth = 1;
dc21285_map.read = dc21285_read8;
dc21285_map.write = dc21285_write8;
dc21285_map.copy_to = dc21285_copy_to_8;
break;
- case SA110_CNTL_ROMWIDTH_16:
- dc21285_map.bankwidth = 2;
+ case SA110_CNTL_ROMWIDTH_16:
+ dc21285_map.bankwidth = 2;
dc21285_map.read = dc21285_read16;
dc21285_map.write = dc21285_write16;
dc21285_map.copy_to = dc21285_copy_to_16;
break;
- case SA110_CNTL_ROMWIDTH_32:
- dc21285_map.bankwidth = 4;
+ case SA110_CNTL_ROMWIDTH_32:
+ dc21285_map.bankwidth = 4;
dc21285_map.read = dc21285_read32;
dc21285_map.write = dc21285_write32;
dc21285_map.copy_to = dc21285_copy_to_32;
@@ -201,20 +201,20 @@ static int __init init_dc21285(void)
if (!dc21285_mtd) {
iounmap(dc21285_map.virt);
return -ENXIO;
- }
-
+ }
+
dc21285_mtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
if (nrparts > 0)
add_mtd_partitions(dc21285_mtd, dc21285_parts, nrparts);
- else
-#endif
+ else
+#endif
add_mtd_device(dc21285_mtd);
-
+
if(machine_is_ebsa285()) {
- /*
+ /*
* Flash timing is determined with bits 19-16 of the
* CSR_SA110_CNTL. The value is the number of wait cycles, or
* 0 for 16 cycles (the default). Cycles are 20 ns.
@@ -227,7 +227,7 @@ static int __init init_dc21285(void)
/* tristate time */
*CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x0f000000) | (7 << 24));
}
-
+
return 0;
}
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index f99519692cb7..b51c757817d8 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -14,7 +14,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*
- * $Id: dilnetpc.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: dilnetpc.c,v 1.20 2005/11/07 11:14:26 gleixner Exp $
*
* The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
* featuring the AMD Elan SC410 processor. There are two variants of this
@@ -272,13 +272,13 @@ static struct map_info dnpc_map = {
static struct mtd_partition partition_info[]=
{
- {
- .name = "ADNP boot",
- .offset = 0,
+ {
+ .name = "ADNP boot",
+ .offset = 0,
.size = 0xf0000,
},
- {
- .name = "ADNP system BIOS",
+ {
+ .name = "ADNP system BIOS",
.offset = MTDPART_OFS_NXTBLK,
.size = 0x10000,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
@@ -291,7 +291,7 @@ static struct mtd_partition partition_info[]=
.size = 0x2f0000,
},
{
- .name = "ADNP system BIOS entry",
+ .name = "ADNP system BIOS entry",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
@@ -325,9 +325,9 @@ static struct mtd_info *merged_mtd;
static struct mtd_partition higlvl_partition_info[]=
{
- {
- .name = "ADNP boot block",
- .offset = 0,
+ {
+ .name = "ADNP boot block",
+ .offset = 0,
.size = CONFIG_MTD_DILNETPC_BOOTSIZE,
},
{
@@ -335,8 +335,8 @@ static struct mtd_partition higlvl_partition_info[]=
.offset = MTDPART_OFS_NXTBLK,
.size = ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000,
},
- {
- .name = "ADNP system BIOS + BIOS Entry",
+ {
+ .name = "ADNP system BIOS + BIOS Entry",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
@@ -371,7 +371,7 @@ static int __init init_dnpc(void)
/*
** determine hardware (DNP/ADNP/invalid)
- */
+ */
if((is_dnp = dnp_adnp_probe()) < 0)
return -ENXIO;
@@ -397,13 +397,13 @@ static int __init init_dnpc(void)
++dnpc_map.name;
for(i = 0; i < NUM_PARTITIONS; i++)
++partition_info[i].name;
- higlvl_partition_info[1].size = DNP_WINDOW_SIZE -
+ higlvl_partition_info[1].size = DNP_WINDOW_SIZE -
CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000;
for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++)
++higlvl_partition_info[i].name;
}
- printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%lx\n",
+ printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%lx\n",
is_dnp ? "DNPC" : "ADNP", dnpc_map.size, dnpc_map.phys);
dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);
@@ -436,7 +436,7 @@ static int __init init_dnpc(void)
iounmap(dnpc_map.virt);
return -ENXIO;
}
-
+
mymtd->owner = THIS_MODULE;
/*
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index b9bc63503e26..b993ac01a9a5 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -1,10 +1,10 @@
/*
* drivers/mtd/maps/svme182.c
- *
+ *
* Flash map driver for the Dy4 SVME182 board
- *
- * $Id: dmv182.c,v 1.5 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
*
* Copyright 2003-2004, TimeSys Corporation
*
@@ -104,7 +104,7 @@ static int __init init_svme182(void)
partitions = svme182_partitions;
svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size);
-
+
if (svme182_map.virt == 0) {
printk("Failed to ioremap FLASH memory area.\n");
return -EIO;
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index b9d9cf4854b6..c0daf58357ca 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -1,6 +1,6 @@
/*
- * $Id: ebony.c,v 1.15 2004/12/09 18:39:54 holindho Exp $
- *
+ * $Id: ebony.c,v 1.16 2005/11/07 11:14:26 gleixner Exp $
+ *
* Mapping for Ebony user flash
*
* Matt Porter <mporter@kernel.crashing.org>
@@ -85,7 +85,7 @@ int __init init_ebony(void)
small_flash_base = EBONY_SMALL_FLASH_LOW2;
else
small_flash_base = EBONY_SMALL_FLASH_LOW1;
-
+
if (EBONY_BOOT_SMALL_FLASH(fpga0_reg) &&
!EBONY_ONBRD_FLASH_EN(fpga0_reg))
large_flash_base = EBONY_LARGE_FLASH_LOW;
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
index 8b0da394f3fa..b48a3473ffc1 100644
--- a/drivers/mtd/maps/edb7312.c
+++ b/drivers/mtd/maps/edb7312.c
@@ -1,10 +1,10 @@
/*
- * $Id: edb7312.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: edb7312.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
*
* Handle mapping of the NOR flash on Cogent EDB7312 boards
*
* Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -46,7 +46,7 @@ struct map_info edb7312nor_map = {
#ifdef CONFIG_MTD_PARTITIONS
/*
- * MTD partitioning stuff
+ * MTD partitioning stuff
*/
static struct mtd_partition static_partitions[3] =
{
@@ -80,7 +80,7 @@ int __init init_edb7312nor(void)
const char **type;
const char *part_type = 0;
- printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
+ printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
WINDOW_SIZE, WINDOW_ADDR);
edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
@@ -88,7 +88,7 @@ int __init init_edb7312nor(void)
printk(MSG_PREFIX "failed to ioremap\n");
return -EIO;
}
-
+
simple_map_init(&edb7312nor_map);
mymtd = 0;
diff --git a/drivers/mtd/maps/epxa10db-flash.c b/drivers/mtd/maps/epxa10db-flash.c
index 1df6188926b3..265b079fe934 100644
--- a/drivers/mtd/maps/epxa10db-flash.c
+++ b/drivers/mtd/maps/epxa10db-flash.c
@@ -5,7 +5,7 @@
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2001 Red Hat, Inc.
*
- * $Id: epxa10db-flash.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: epxa10db-flash.c,v 1.15 2005/11/07 11:14:27 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -62,7 +62,7 @@ static const char *probes[] = { "RedBoot", "afs", NULL };
static int __init epxa_mtd_init(void)
{
int i;
-
+
printk(KERN_NOTICE "%s flash device: 0x%x at 0x%x\n", BOARD_NAME, FLASH_SIZE, FLASH_START);
epxa_map.virt = ioremap(FLASH_START, FLASH_SIZE);
@@ -126,8 +126,8 @@ static void __exit epxa_mtd_cleanup(void)
}
-/*
- * This will do for now, once we decide which bootldr we're finally
+/*
+ * This will do for now, once we decide which bootldr we're finally
* going to use then we'll remove this function and do it properly
*
* Partions are currently (as offsets from base of flash):
@@ -140,7 +140,7 @@ static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_pa
struct mtd_partition *parts;
int ret, i;
int npartitions = 0;
- char *names;
+ char *names;
const char *name = "jffs";
printk("Using default partitions for %s\n",BOARD_NAME);
@@ -152,7 +152,7 @@ static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_pa
goto out;
}
i=0;
- names = (char *)&parts[npartitions];
+ names = (char *)&parts[npartitions];
parts[i].name = names;
names += strlen(name) + 1;
strcpy(parts[i].name, name);
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 00f7bbe5479e..c6bf4e1219ef 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -1,6 +1,6 @@
/* fortunet.c memory map
*
- * $Id: fortunet.c,v 1.9 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: fortunet.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
*/
#include <linux/module.h>
@@ -212,7 +212,7 @@ int __init init_fortunet(void)
map_regions[ix].map_info.phys = map_regions[ix].window_addr_physical,
- map_regions[ix].map_info.virt =
+ map_regions[ix].map_info.virt =
ioremap_nocache(
map_regions[ix].window_addr_physical,
map_regions[ix].map_info.size);
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index c73828171d9b..319094821101 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -1,11 +1,11 @@
/*
- * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
+ * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
* evaluation boards
- *
- * $Id: h720x-flash.c,v 1.11 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * $Id: h720x-flash.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
*
* (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
- * 2003 Thomas Gleixner <tglx@linutronix.de>
+ * 2003 Thomas Gleixner <tglx@linutronix.de>
*/
#include <linux/config.h>
@@ -72,7 +72,7 @@ int __init h720x_mtd_init(void)
{
char *part_type = NULL;
-
+
h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE);
if (!h720x_map.virt) {
@@ -91,7 +91,7 @@ int __init h720x_mtd_init(void)
h720x_map.bankwidth = 2;
mymtd = do_map_probe("cfi_probe", &h720x_map);
}
-
+
if (mymtd) {
mymtd->owner = THIS_MODULE;
@@ -124,11 +124,11 @@ static void __exit h720x_mtd_cleanup(void)
del_mtd_partitions(mymtd);
map_destroy(mymtd);
}
-
+
/* Free partition info, if commandline partition was used */
if (mtd_parts && (mtd_parts != h720x_partitions))
kfree (mtd_parts);
-
+
if (h720x_map.virt) {
iounmap((void *)h720x_map.virt);
h720x_map.virt = 0;
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index c5e2111ba146..ea5073781b3a 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,7 @@
* ichxrom.c
*
* Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.18 2005/07/07 10:26:20 dwmw2 Exp $
+ * $Id: ichxrom.c,v 1.19 2005/11/07 11:14:27 gleixner Exp $
*/
#include <linux/module.h>
@@ -101,7 +101,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
* you can only really attach a FWH to an ICHX there
* a number of simplifications you can make.
*
- * Also you can page firmware hubs if an 8MB window isn't enough
+ * Also you can page firmware hubs if an 8MB window isn't enough
* but don't currently handle that case either.
*/
window->pdev = pdev;
@@ -144,7 +144,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
window->phys = 0xfff00000;
}
else if ((byte & 0x80) == 0x80) {
- window->phys = 0xfff80000;
+ window->phys = 0xfff80000;
}
if (window->phys == 0) {
@@ -233,7 +233,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
* in a factory setting. So in-place programming
* needs to use a different method.
*/
- for(map->map.bankwidth = 32; map->map.bankwidth;
+ for(map->map.bankwidth = 32; map->map.bankwidth;
map->map.bankwidth >>= 1)
{
char **probe_type;
@@ -286,7 +286,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
for(i = 0; i < cfi->numchips; i++) {
cfi->chips[i].start += offset;
}
-
+
/* Now that the mtd devices is complete claim and export it */
map->mtd->owner = THIS_MODULE;
if (add_mtd_device(map->mtd)) {
@@ -324,11 +324,11 @@ static void __devexit ichxrom_remove_one (struct pci_dev *pdev)
}
static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
PCI_ANY_ID, PCI_ANY_ID, },
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index cb39172c81d2..ba7f40311a7e 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -1,10 +1,10 @@
/*
- * $Id: impa7.c,v 1.13 2004/11/04 13:24:14 gleixner Exp $
+ * $Id: impa7.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
*
* Handle mapping of the NOR flash on implementa A7 boards
*
* Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -55,7 +55,7 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = {
#ifdef CONFIG_MTD_PARTITIONS
/*
- * MTD partitioning stuff
+ * MTD partitioning stuff
*/
static struct mtd_partition static_partitions[] =
{
@@ -108,9 +108,9 @@ int __init init_impa7(void)
impa7_mtd[i]->owner = THIS_MODULE;
devicesfound++;
#ifdef CONFIG_MTD_PARTITIONS
- mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
+ mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
probes,
- &mtd_parts[i],
+ &mtd_parts[i],
0);
if (mtd_parts_nb[i] > 0) {
part_type = "command line";
@@ -121,16 +121,16 @@ int __init init_impa7(void)
}
printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n",
+ "using %s partition definition\n",
part_type);
- add_mtd_partitions(impa7_mtd[i],
+ add_mtd_partitions(impa7_mtd[i],
mtd_parts[i], mtd_parts_nb[i]);
#else
add_mtd_device(impa7_mtd[i]);
#endif
}
- else
+ else
iounmap((void *)impa7_map[i].virt);
}
return devicesfound == 0 ? -ENXIO : 0;
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index 93f50d6d5488..fe738fd8d6f8 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -1,28 +1,28 @@
/*======================================================================
drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
-
+
Copyright (C) 2000 ARM Limited
Copyright (C) 2003 Deep Blue Solutions Ltd.
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- This is access code for flashes using ARM's flash partitioning
+
+ This is access code for flashes using ARM's flash partitioning
standards.
- $Id: integrator-flash.c,v 1.18 2004/11/01 13:26:15 rmk Exp $
+ $Id: integrator-flash.c,v 1.20 2005/11/07 11:14:27 gleixner Exp $
======================================================================*/
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index 70b0e0b82c34..35097c9bbf50 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -1,11 +1,11 @@
/*
* Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
- *
+ *
* (C) 2000 Nicolas Pitre <nico@cam.org>
* (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
* (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- *
- * $Id: ipaq-flash.c,v 1.3 2004/11/04 13:24:15 gleixner Exp $
+ *
+ * $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
*/
#include <linux/config.h>
@@ -107,7 +107,7 @@ static struct mtd_partition h3xxx_partitions[] = {
#ifndef CONFIG_LAB
mask_flags: MTD_WRITEABLE, /* force read-only */
#endif
- },
+ },
{
name: "H3XXX root jffs2",
#ifndef CONFIG_LAB
@@ -148,7 +148,7 @@ static DEFINE_SPINLOCK(ipaq_vpp_lock);
static void h3xxx_set_vpp(struct map_info *map, int vpp)
{
static int nest = 0;
-
+
spin_lock(&ipaq_vpp_lock);
if (vpp)
nest++;
@@ -191,7 +191,7 @@ static unsigned long cs_phys[] = {
SA1100_CS3_PHYS,
SA1100_CS4_PHYS,
SA1100_CS5_PHYS,
-#else
+#else
PXA_CS0_PHYS,
PXA_CS1_PHYS,
PXA_CS2_PHYS,
@@ -216,7 +216,7 @@ int __init ipaq_mtd_init(void)
/* Default flash bankwidth */
// ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
-
+
if (machine_is_h1900())
{
/* For our intents, the h1900 is not a real iPAQ, so we special-case it. */
@@ -229,7 +229,7 @@ int __init ipaq_mtd_init(void)
else
for(i=0; i<MAX_IPAQ_CS; i++)
ipaq_map[i].bankwidth = 4;
-
+
/*
* Static partition definition selection
*/
@@ -309,7 +309,7 @@ int __init ipaq_mtd_init(void)
return -ENXIO;
} else
printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size);
-
+
/* do we really need this debugging? --joshua 20030703 */
// printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]);
my_sub_mtd[i]->owner = THIS_MODULE;
@@ -333,11 +333,11 @@ int __init ipaq_mtd_init(void)
#else
mymtd = my_sub_mtd[0];
- /*
+ /*
*In the very near future, command line partition parsing
* will use the device name as 'mtd-id' instead of a value
* passed to the parse_cmdline_partitions() routine. Since
- * the bootldr says 'ipaq', make sure it continues to work.
+ * the bootldr says 'ipaq', make sure it continues to work.
*/
mymtd->name = "ipaq";
@@ -385,7 +385,7 @@ int __init ipaq_mtd_init(void)
*/
i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0);
-
+
if (i > 0) {
nb_parts = parsed_nr_parts = i;
parts = parsed_parts;
@@ -423,10 +423,10 @@ static void __exit ipaq_mtd_cleanup(void)
#endif
map_destroy(mymtd);
#ifdef CONFIG_MTD_CONCAT
- for(i=0; i<MAX_IPAQ_CS; i++)
+ for(i=0; i<MAX_IPAQ_CS; i++)
#else
- for(i=1; i<MAX_IPAQ_CS; i++)
-#endif
+ for(i=1; i<MAX_IPAQ_CS; i++)
+#endif
{
if (my_sub_mtd[i])
map_destroy(my_sub_mtd[i]);
@@ -444,14 +444,14 @@ static int __init h1900_special_case(void)
ipaq_map[0].phys = 0x0;
ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1);
ipaq_map[0].bankwidth = 2;
-
+
printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
mymtd = do_map_probe("jedec_probe", &ipaq_map[0]);
if (!mymtd)
return -ENODEV;
add_mtd_device(mymtd);
printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n");
-
+
return 0;
}
diff --git a/drivers/mtd/maps/iq80310.c b/drivers/mtd/maps/iq80310.c
index 2e7577492a2c..62d9e87d84e2 100644
--- a/drivers/mtd/maps/iq80310.c
+++ b/drivers/mtd/maps/iq80310.c
@@ -1,11 +1,11 @@
/*
- * $Id: iq80310.c,v 1.20 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: iq80310.c,v 1.21 2005/11/07 11:14:27 gleixner Exp $
*
* Mapping for the Intel XScale IQ80310 evaluation board
*
* Author: Nicolas Pitre
* Copyright: (C) 2001 MontaVista Software Inc.
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index 6f36497022d1..641eb2b55e9f 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,5 +1,5 @@
/*
- * $Id: ixp2000.c,v 1.6 2005/03/18 14:07:46 gleixner Exp $
+ * $Id: ixp2000.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
*
* drivers/mtd/maps/ixp2000.c
*
@@ -14,7 +14,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
+ *
*/
#include <linux/module.h>
@@ -46,8 +46,8 @@ struct ixp2000_flash_info {
};
static inline unsigned long flash_bank_setup(struct map_info *map, unsigned long ofs)
-{
- unsigned long (*set_bank)(unsigned long) =
+{
+ unsigned long (*set_bank)(unsigned long) =
(unsigned long(*)(unsigned long))map->map_priv_2;
return (set_bank ? set_bank(ofs) : ofs);
@@ -55,8 +55,8 @@ static inline unsigned long flash_bank_setup(struct map_info *map, unsigned long
#ifdef __ARMEB__
/*
- * Rev A0 and A1 of IXP2400 silicon have a broken addressing unit which
- * causes the lower address bits to be XORed with 0x11 on 8 bit accesses
+ * Rev A0 and A1 of IXP2400 silicon have a broken addressing unit which
+ * causes the lower address bits to be XORed with 0x11 on 8 bit accesses
* and XORed with 0x10 on 16 bit accesses. See the spec update, erratum 44.
*/
static int erratum44_workaround = 0;
@@ -90,7 +90,7 @@ static void ixp2000_flash_copy_from(struct map_info *map, void *to,
unsigned long from, ssize_t len)
{
from = flash_bank_setup(map, from);
- while(len--)
+ while(len--)
*(__u8 *) to++ = *(__u8 *)(map->map_priv_1 + from++);
}
@@ -148,11 +148,11 @@ static int ixp2000_flash_probe(struct device *_dev)
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
struct platform_device *dev = to_platform_device(_dev);
struct ixp2000_flash_data *ixp_data = dev->dev.platform_data;
- struct flash_platform_data *plat;
+ struct flash_platform_data *plat;
struct ixp2000_flash_info *info;
unsigned long window_size;
int err = -1;
-
+
if (!ixp_data)
return -ENODEV;
@@ -161,7 +161,7 @@ static int ixp2000_flash_probe(struct device *_dev)
return -ENODEV;
window_size = dev->resource->end - dev->resource->start + 1;
- dev_info(_dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n",
+ dev_info(_dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n",
ixp_data->nr_banks, ((u32)window_size >> 20));
if (plat->width != 1) {
@@ -174,7 +174,7 @@ static int ixp2000_flash_probe(struct device *_dev)
if(!info) {
err = -ENOMEM;
goto Error;
- }
+ }
memzero(info, sizeof(struct ixp2000_flash_info));
dev_set_drvdata(&dev->dev, info);
@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct device *_dev)
* not attempt to do a direct access on us.
*/
info->map.phys = NO_XIP;
-
+
info->nr_banks = ixp_data->nr_banks;
info->map.size = ixp_data->nr_banks * window_size;
info->map.bankwidth = 1;
@@ -192,7 +192,7 @@ static int ixp2000_flash_probe(struct device *_dev)
/*
* map_priv_2 is used to store a ptr to to the bank_setup routine
*/
- info->map.map_priv_2 = (void __iomem *) ixp_data->bank_setup;
+ info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
info->map.name = dev->dev.bus_id;
info->map.read = ixp2000_flash_read8;
@@ -200,8 +200,8 @@ static int ixp2000_flash_probe(struct device *_dev)
info->map.copy_from = ixp2000_flash_copy_from;
info->map.copy_to = ixp2000_flash_copy_to;
- info->res = request_mem_region(dev->resource->start,
- dev->resource->end - dev->resource->start + 1,
+ info->res = request_mem_region(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1,
dev->dev.bus_id);
if (!info->res) {
dev_err(_dev, "Could not reserve memory region\n");
@@ -209,7 +209,7 @@ static int ixp2000_flash_probe(struct device *_dev)
goto Error;
}
- info->map.map_priv_1 = ioremap(dev->resource->start,
+ info->map.map_priv_1 = (unsigned long) ioremap(dev->resource->start,
dev->resource->end - dev->resource->start + 1);
if (!info->map.map_priv_1) {
dev_err(_dev, "Failed to ioremap flash region\n");
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 0d87c02dee04..56b3a355bf7b 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,5 +1,5 @@
/*
- * $Id: ixp4xx.c,v 1.7 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: ixp4xx.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
*
* drivers/mtd/maps/ixp4xx.c
*
@@ -45,7 +45,7 @@
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
{
map_word val;
- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
+ val.x[0] = le16_to_cpu(readw(map->virt + ofs));
return val;
}
@@ -59,35 +59,35 @@ static void ixp4xx_copy_from(struct map_info *map, void *to,
{
int i;
u8 *dest = (u8 *) to;
- u16 *src = (u16 *) (map->map_priv_1 + from);
+ void __iomem *src = map->virt + from;
u16 data;
for (i = 0; i < (len / 2); i++) {
- data = src[i];
+ data = le16_to_cpu(readw(src + 2*i));
dest[i * 2] = BYTE0(data);
dest[i * 2 + 1] = BYTE1(data);
}
if (len & 1)
- dest[len - 1] = BYTE0(src[i]);
+ dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i)));
}
-/*
+/*
* Unaligned writes are ignored, causing the 8-bit
* probe to fail and proceed to the 16-bit probe (which succeeds).
*/
static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
{
if (!(adr & 1))
- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ writew(cpu_to_le16(d.x[0]), map->virt + adr);
}
-/*
+/*
* Fast write16 function without the probing check above
*/
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
{
- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
+ writew(cpu_to_le16(d.x[0]), map->virt + adr);
}
struct ixp4xx_flash_info {
@@ -104,25 +104,18 @@ static int ixp4xx_flash_remove(struct device *_dev)
struct platform_device *dev = to_platform_device(_dev);
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev);
- map_word d;
dev_set_drvdata(&dev->dev, NULL);
if(!info)
return 0;
- /*
- * This is required for a soft reboot to work.
- */
- d.x[0] = 0xff;
- ixp4xx_write16(&info->map, d, 0x55 * 0x2);
-
if (info->mtd) {
del_mtd_partitions(info->mtd);
map_destroy(info->mtd);
}
- if (info->map.map_priv_1)
- iounmap((void *) info->map.map_priv_1);
+ if (info->map.virt)
+ iounmap(info->map.virt);
kfree(info->partitions);
@@ -134,9 +127,6 @@ static int ixp4xx_flash_remove(struct device *_dev)
if (plat->exit)
plat->exit();
- /* Disable flash write */
- *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE;
-
return 0;
}
@@ -160,17 +150,11 @@ static int ixp4xx_flash_probe(struct device *_dev)
if(!info) {
err = -ENOMEM;
goto Error;
- }
+ }
memzero(info, sizeof(struct ixp4xx_flash_info));
dev_set_drvdata(&dev->dev, info);
- /*
- * Enable flash write
- * TODO: Move this out to board specific code
- */
- *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-
/*
* Tell the MTD layer we're not 1:1 mapped so that it does
* not attempt to do a direct access on us.
@@ -189,8 +173,8 @@ static int ixp4xx_flash_probe(struct device *_dev)
info->map.write = ixp4xx_probe_write16,
info->map.copy_from = ixp4xx_copy_from,
- info->res = request_mem_region(dev->resource->start,
- dev->resource->end - dev->resource->start + 1,
+ info->res = request_mem_region(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1,
"IXP4XXFlash");
if (!info->res) {
printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
@@ -198,9 +182,9 @@ static int ixp4xx_flash_probe(struct device *_dev)
goto Error;
}
- info->map.map_priv_1 = ioremap(dev->resource->start,
- dev->resource->end - dev->resource->start + 1);
- if (!info->map.map_priv_1) {
+ info->map.virt = ioremap(dev->resource->start,
+ dev->resource->end - dev->resource->start + 1);
+ if (!info->map.virt) {
printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
err = -EIO;
goto Error;
@@ -213,7 +197,7 @@ static int ixp4xx_flash_probe(struct device *_dev)
goto Error;
}
info->mtd->owner = THIS_MODULE;
-
+
/* Use the fast version */
info->map.write = ixp4xx_write16,
@@ -258,4 +242,3 @@ module_exit(ixp4xx_flash_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems");
MODULE_AUTHOR("Deepak Saxena");
-
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index b08668212ab7..851bf9576052 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,5 +1,5 @@
/*
- * $Id: l440gx.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
*
* BIOS Flash chip on Intel 440GX board.
*
@@ -49,7 +49,7 @@ static struct map_info l440gx_map = {
.bankwidth = BUSWIDTH,
.phys = WINDOW_ADDR,
#if 0
- /* FIXME verify that this is the
+ /* FIXME verify that this is the
* appripriate code for vpp enable/disable
*/
.set_vpp = l440gx_set_vpp
@@ -62,10 +62,10 @@ static int __init init_l440gx(void)
struct resource *pm_iobase;
__u16 word;
- dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ dev = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
- pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
if (!dev || !pm_dev) {
@@ -82,10 +82,10 @@ static int __init init_l440gx(void)
simple_map_init(&l440gx_map);
printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
- /* Setup the pm iobase resource
+ /* Setup the pm iobase resource
* This code should move into some kind of generic bridge
* driver but for the moment I'm content with getting the
- * allocation correct.
+ * allocation correct.
*/
pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
if (!(pm_iobase->flags & IORESOURCE_IO)) {
@@ -110,7 +110,7 @@ static int __init init_l440gx(void)
/* Set the iobase */
iobase = pm_iobase->start;
pci_write_config_dword(pm_dev, 0x40, iobase | 1);
-
+
/* Set XBCS# */
pci_read_config_word(dev, 0x4e, &word);
@@ -122,7 +122,7 @@ static int __init init_l440gx(void)
/* Enable the gate on the WE line */
outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
-
+
printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
mymtd = do_map_probe("jedec_probe", &l440gx_map);
@@ -145,7 +145,7 @@ static void __exit cleanup_l440gx(void)
{
del_mtd_device(mymtd);
map_destroy(mymtd);
-
+
iounmap(l440gx_map.virt);
}
diff --git a/drivers/mtd/maps/lubbock-flash.c b/drivers/mtd/maps/lubbock-flash.c
index 2b4c5058787d..1aa0447c5e66 100644
--- a/drivers/mtd/maps/lubbock-flash.c
+++ b/drivers/mtd/maps/lubbock-flash.c
@@ -1,11 +1,11 @@
/*
- * $Id: lubbock-flash.c,v 1.19 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: lubbock-flash.c,v 1.21 2005/11/07 11:14:27 gleixner Exp $
*
* Map driver for the Lubbock developer platform.
*
* Author: Nicolas Pitre
* Copyright: (C) 2001 MontaVista Software Inc.
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -76,7 +76,7 @@ static int __init init_lubbock(void)
int flashboot = (LUB_CONF_SWITCHES & 1);
int ret = 0, i;
- lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth =
+ lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth =
(BOOT_DEF & 1) ? 2 : 4;
/* Compensate for the nROMBT switch which swaps the flash banks */
@@ -100,11 +100,11 @@ static int __init init_lubbock(void)
simple_map_init(&lubbock_maps[i]);
printk(KERN_NOTICE "Probing %s at physical address 0x%08lx (%d-bit bankwidth)\n",
- lubbock_maps[i].name, lubbock_maps[i].phys,
+ lubbock_maps[i].name, lubbock_maps[i].phys,
lubbock_maps[i].bankwidth * 8);
mymtds[i] = do_map_probe("cfi_probe", &lubbock_maps[i]);
-
+
if (!mymtds[i]) {
iounmap((void *)lubbock_maps[i].virt);
if (lubbock_maps[i].cached)
@@ -124,7 +124,7 @@ static int __init init_lubbock(void)
if (!mymtds[0] && !mymtds[1])
return ret;
-
+
for (i = 0; i < 2; i++) {
if (!mymtds[i]) {
printk(KERN_WARNING "%s is absent. Skipping\n", lubbock_maps[i].name);
@@ -151,7 +151,7 @@ static void __exit cleanup_lubbock(void)
if (nr_parsed_parts[i] || !i)
del_mtd_partitions(mymtds[i]);
else
- del_mtd_device(mymtds[i]);
+ del_mtd_device(mymtds[i]);
map_destroy(mymtds[i]);
iounmap((void *)lubbock_maps[i].virt);
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c
index da0f8a692628..eaa4bbb868a3 100644
--- a/drivers/mtd/maps/mainstone-flash.c
+++ b/drivers/mtd/maps/mainstone-flash.c
@@ -5,7 +5,7 @@
*
* Author: Nicolas Pitre
* Copyright: (C) 2001 MontaVista Software Inc.
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -91,27 +91,27 @@ static int __init init_mainstone(void)
mainstone_maps[i].virt = ioremap(mainstone_maps[i].phys,
WINDOW_SIZE);
if (!mainstone_maps[i].virt) {
- printk(KERN_WARNING "Failed to ioremap %s\n",
+ printk(KERN_WARNING "Failed to ioremap %s\n",
mainstone_maps[i].name);
if (!ret)
ret = -ENOMEM;
continue;
}
- mainstone_maps[i].cached =
+ mainstone_maps[i].cached =
ioremap_cached(mainstone_maps[i].phys, WINDOW_SIZE);
if (!mainstone_maps[i].cached)
printk(KERN_WARNING "Failed to ioremap cached %s\n",
mainstone_maps[i].name);
simple_map_init(&mainstone_maps[i]);
- printk(KERN_NOTICE
+ printk(KERN_NOTICE
"Probing %s at physical address 0x%08lx"
" (%d-bit bankwidth)\n",
- mainstone_maps[i].name, mainstone_maps[i].phys,
+ mainstone_maps[i].name, mainstone_maps[i].phys,
mainstone_maps[i].bankwidth * 8);
mymtds[i] = do_map_probe("cfi_probe", &mainstone_maps[i]);
-
+
if (!mymtds[i]) {
iounmap((void *)mainstone_maps[i].virt);
if (mainstone_maps[i].cached)
@@ -131,21 +131,21 @@ static int __init init_mainstone(void)
if (!mymtds[0] && !mymtds[1])
return ret;
-
+
for (i = 0; i < 2; i++) {
if (!mymtds[i]) {
- printk(KERN_WARNING "%s is absent. Skipping\n",
+ printk(KERN_WARNING "%s is absent. Skipping\n",
mainstone_maps[i].name);
} else if (nr_parsed_parts[i]) {
- add_mtd_partitions(mymtds[i], parsed_parts[i],
+ add_mtd_partitions(mymtds[i], parsed_parts[i],
nr_parsed_parts[i]);
} else if (!i) {
printk("Using static partitions on %s\n",
mainstone_maps[i].name);
- add_mtd_partitions(mymtds[i], mainstone_partitions,
+ add_mtd_partitions(mymtds[i], mainstone_partitions,
ARRAY_SIZE(mainstone_partitions));
} else {
- printk("Registering %s as whole device\n",
+ printk("Registering %s as whole device\n",
mainstone_maps[i].name);
add_mtd_device(mymtds[i]);
}
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
index c5c6901a4763..06b118727846 100644
--- a/drivers/mtd/maps/mbx860.c
+++ b/drivers/mtd/maps/mbx860.c
@@ -1,11 +1,11 @@
/*
- * $Id: mbx860.c,v 1.8 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: mbx860.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
*
* Handle mapping of the flash on MBX860 boards
*
* Author: Anton Todorov
* Copyright: (C) 2001 Emness Technology
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -46,7 +46,7 @@ static struct mtd_partition partition_info[]={
{ .name = "MBX flash APPLICATION partition",
.offset = (BOOT_PARTITION_SIZE_KiB+KERNEL_PARTITION_SIZE_KiB)*1024 }
};
-
+
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/mtx-1_flash.c b/drivers/mtd/maps/mtx-1_flash.c
new file mode 100644
index 000000000000..d1e66e186746
--- /dev/null
+++ b/drivers/mtd/maps/mtx-1_flash.c
@@ -0,0 +1,96 @@
+/*
+ * Flash memory access on 4G Systems MTX-1 boards
+ *
+ * $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $
+ *
+ * (C) 2005 Bruno Randolf <bruno.randolf@4g-systems.biz>
+ * (C) 2005 Jörn Engel <joern@wohnheim.fh-wedel.de>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+static struct map_info mtx1_map = {
+ .name = "MTX-1 flash",
+ .bankwidth = 4,
+ .size = 0x2000000,
+ .phys = 0x1E000000,
+};
+
+static struct mtd_partition mtx1_partitions[] = {
+ {
+ .name = "filesystem",
+ .size = 0x01C00000,
+ .offset = 0,
+ },{
+ .name = "yamon",
+ .size = 0x00100000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },{
+ .name = "kernel",
+ .size = 0x002c0000,
+ .offset = MTDPART_OFS_APPEND,
+ },{
+ .name = "yamon env",
+ .size = 0x00040000,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct mtd_info *mtx1_mtd;
+
+int __init mtx1_mtd_init(void)
+{
+ int ret = -ENXIO;
+
+ simple_map_init(&mtx1_map);
+
+ mtx1_map.virt = ioremap(mtx1_map.phys, mtx1_map.size);
+ if (!mtx1_map.virt)
+ return -EIO;
+
+ mtx1_mtd = do_map_probe("cfi_probe", &mtx1_map);
+ if (!mtx1_mtd)
+ goto err;
+
+ mtx1_mtd->owner = THIS_MODULE;
+
+ ret = add_mtd_partitions(mtx1_mtd, mtx1_partitions,
+ ARRAY_SIZE(mtx1_partitions));
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ iounmap(mtx1_map.virt);
+ return ret;
+}
+
+static void __exit mtx1_mtd_cleanup(void)
+{
+ if (mtx1_mtd) {
+ del_mtd_partitions(mtx1_mtd);
+ map_destroy(mtx1_mtd);
+ }
+ if (mtx1_map.virt)
+ iounmap(mtx1_map.virt);
+}
+
+module_init(mtx1_mtd_init);
+module_exit(mtx1_mtd_cleanup);
+
+MODULE_AUTHOR("Bruno Randolf <bruno.randolf@4g-systems.biz>");
+MODULE_DESCRIPTION("MTX-1 flash map");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index ab7e6358d281..33060a315722 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -3,7 +3,7 @@
* Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
* based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
*
- * $Id: netsc520.c,v 1.13 2004/11/28 09:40:40 dwmw2 Exp $
+ * $Id: netsc520.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -38,7 +38,7 @@
** The single, 16 megabyte flash bank is divided into four virtual
** partitions. The first partition is 768 KiB and is intended to
** store the kernel image loaded by the bootstrap loader. The second
-** partition is 256 KiB and holds the BIOS image. The third
+** partition is 256 KiB and holds the BIOS image. The third
** partition is 14.5 MiB and is intended for the flash file system
** image. The last partition is 512 KiB and contains another copy
** of the BIOS image and the reset vector.
@@ -51,28 +51,28 @@
** recoverable afterwards.
*/
-/* partition_info gives details on the logical partitions that the split the
+/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
static struct mtd_partition partition_info[]={
- {
- .name = "NetSc520 boot kernel",
- .offset = 0,
+ {
+ .name = "NetSc520 boot kernel",
+ .offset = 0,
.size = 0xc0000
},
- {
- .name = "NetSc520 Low BIOS",
- .offset = 0xc0000,
+ {
+ .name = "NetSc520 Low BIOS",
+ .offset = 0xc0000,
.size = 0x40000
},
- {
- .name = "NetSc520 file system",
- .offset = 0x100000,
+ {
+ .name = "NetSc520 file system",
+ .offset = 0x100000,
.size = 0xe80000
},
- {
- .name = "NetSc520 High BIOS",
- .offset = 0xf80000,
+ {
+ .name = "NetSc520 High BIOS",
+ .offset = 0xf80000,
.size = 0x80000
},
};
@@ -114,7 +114,7 @@ static int __init init_netsc520(void)
iounmap(netsc520_map.virt);
return -ENXIO;
}
-
+
mymtd->owner = THIS_MODULE;
add_mtd_partitions( mymtd, partition_info, NUM_PARTITIONS );
return 0;
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 61be5a4148c9..f00ee7e54dba 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -6,7 +6,7 @@
* (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
*
- * $Id: nettel.c,v 1.10 2005/01/05 17:11:29 dwmw2 Exp $
+ * $Id: nettel.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
*/
/****************************************************************************/
@@ -143,7 +143,7 @@ static int nettel_reboot_notifier(struct notifier_block *nb, unsigned long val,
{
struct cfi_private *cfi = nettel_intel_map.fldrv_priv;
unsigned long b;
-
+
/* Make sure all FLASH chips are put back into read mode */
for (b = 0; (b < nettel_intel_partitions[3].size); b += 0x100000) {
cfi_send_gen_cmd(0xff, 0x55, b, &nettel_intel_map, cfi,
@@ -199,7 +199,7 @@ int nettel_eraseconfig(void)
schedule(); /* Wait for erase to finish. */
remove_wait_queue(&wait_q, &wait);
-
+
put_mtd_device(mtd);
}
@@ -430,7 +430,7 @@ int __init nettel_init(void)
nettel_intel_partitions[1].size = (intel0size + intel1size) -
(1024*1024 + intel_mtd->erasesize);
nettel_intel_partitions[3].size = intel0size + intel1size;
- nettel_intel_partitions[4].offset =
+ nettel_intel_partitions[4].offset =
(intel0size + intel1size) - intel_mtd->erasesize;
nettel_intel_partitions[4].size = intel_mtd->erasesize;
nettel_intel_partitions[5].offset =
diff --git a/drivers/mtd/maps/ocelot.c b/drivers/mtd/maps/ocelot.c
index 82c3070678c5..6977963d7897 100644
--- a/drivers/mtd/maps/ocelot.c
+++ b/drivers/mtd/maps/ocelot.c
@@ -1,5 +1,5 @@
/*
- * $Id: ocelot.c,v 1.16 2005/01/05 18:05:13 dwmw2 Exp $
+ * $Id: ocelot.c,v 1.17 2005/11/07 11:14:27 gleixner Exp $
*
* Flash on Momenco Ocelot
*/
@@ -31,7 +31,7 @@ static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t
struct map_info *map = mtd->priv;
size_t done = 0;
- /* If we use memcpy, it does word-wide writes. Even though we told the
+ /* If we use memcpy, it does word-wide writes. Even though we told the
GT64120A that it's an 8-bit wide region, word-wide writes don't work.
We end up just writing the first byte of the four to all four bytes.
So we have this loop instead */
@@ -68,7 +68,7 @@ static int __init init_ocelot_maps(void)
int nr_parts;
unsigned char brd_status;
- printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n",
+ printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n",
FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR);
/* First check whether the flash jumper is present */
@@ -138,8 +138,8 @@ static int __init init_ocelot_maps(void)
add_mtd_device(flash_mtd);
return 0;
-
- fail3:
+
+ fail3:
iounmap((void *)ocelot_flash_map.virt);
if (ocelot_flash_map.cached)
iounmap((void *)ocelot_flash_map.cached);
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
index e5ff83de420e..a6642db3d325 100644
--- a/drivers/mtd/maps/octagon-5066.c
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -1,12 +1,12 @@
-// $Id: octagon-5066.c,v 1.26 2004/07/12 22:38:29 dwmw2 Exp $
+// $Id: octagon-5066.c,v 1.28 2005/11/07 11:14:27 gleixner Exp $
/* ######################################################################
- Octagon 5066 MTD Driver.
-
+ Octagon 5066 MTD Driver.
+
The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It
comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that
is replacable by flash. Both units are mapped through a multiplexer
- into a 32k memory window at 0xe8000. The control register for the
+ into a 32k memory window at 0xe8000. The control register for the
multiplexing unit is located at IO 0x208 with a bit map of
0-5 Page Selection in 32k increments
6-7 Device selection:
@@ -14,14 +14,14 @@
01 SSD 0 (Socket)
10 SSD 1 (Flash chip)
11 undefined
-
+
On each SSD, the first 128k is reserved for use by the bios
- (actually it IS the bios..) This only matters if you are booting off the
+ (actually it IS the bios..) This only matters if you are booting off the
flash, you must not put a file system starting there.
-
+
The driver tries to do a detection algorithm to guess what sort of devices
are plugged into the sockets.
-
+
##################################################################### */
#include <linux/module.h>
@@ -56,7 +56,7 @@ static void __oct5066_page(struct map_info *map, __u8 byte)
static inline void oct5066_page(struct map_info *map, unsigned long ofs)
{
__u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT);
-
+
if (page_n_dev != byte)
__oct5066_page(map, byte);
}
@@ -78,7 +78,7 @@ static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-
+
spin_lock(&oct5066_spin);
oct5066_page(map, from);
memcpy_fromio(to, iomapadr + from, thislen);
@@ -103,7 +103,7 @@ static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
+
spin_lock(&oct5066_spin);
oct5066_page(map, to);
memcpy_toio(iomapadr + to, from, thislen);
@@ -144,7 +144,7 @@ static struct mtd_info *oct5066_mtd[2] = {NULL, NULL};
// OctProbe - Sense if this is an octagon card
// ---------------------------------------------------------------------
/* Perform a simple validity test, we map the window select SSD0 and
- change pages while monitoring the window. A change in the window,
+ change pages while monitoring the window. A change in the window,
controlled by the PAGE_IO port is a functioning 5066 board. This will
fail if the thing in the socket is set to a uniform value. */
static int __init OctProbe(void)
@@ -161,13 +161,13 @@ static int __init OctProbe(void)
Values[I%10] = readl(iomapadr);
if (I > 0 && Values[I%10] == Values[0])
return -EAGAIN;
- }
+ }
else
{
// Make sure we get the same values on the second pass
if (Values[I%10] != readl(iomapadr))
return -EAGAIN;
- }
+ }
}
return 0;
}
@@ -207,11 +207,11 @@ int __init init_oct5066(void)
ret = -EAGAIN;
goto out_unmap;
}
-
+
// Print out our little header..
printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START,
WINDOW_START+WINDOW_LENGTH);
-
+
for (i=0; i<2; i++) {
oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]);
if (!oct5066_mtd[i])
@@ -225,11 +225,11 @@ int __init init_oct5066(void)
add_mtd_device(oct5066_mtd[i]);
}
}
-
+
if (!oct5066_mtd[0] && !oct5066_mtd[1]) {
cleanup_oct5066();
return -ENXIO;
- }
+ }
return 0;
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index 763304154a92..dc3765270057 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -5,7 +5,7 @@
*
* (C) 2002 MontVista Software, Inc.
*
- * $Id: omap-toto-flash.c,v 1.3 2004/09/16 23:27:13 gleixner Exp $
+ * $Id: omap-toto-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
*/
#include <linux/config.h>
@@ -38,7 +38,7 @@ static struct map_info omap_toto_map_flash = {
.virt = (void __iomem *)OMAP_TOTO_FLASH_BASE,
};
-
+
static struct mtd_partition toto_flash_partitions[] = {
{
.name = "BootLoader",
@@ -54,21 +54,21 @@ static struct mtd_partition toto_flash_partitions[] = {
.name = "EnvArea", /* bottom 64KiB for env vars */
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
- }
+ }
};
static struct mtd_partition *parsed_parts;
static struct mtd_info *flash_mtd;
-
-static int __init init_flash (void)
+
+static int __init init_flash (void)
{
struct mtd_partition *parts;
int nb_parts = 0;
int parsed_nr_parts = 0;
const char *part_type;
-
+
/*
* Static partition definition selection
*/
@@ -89,7 +89,7 @@ static int __init init_flash (void)
flash_mtd = do_map_probe("jedec_probe", &omap_toto_map_flash);
if (!flash_mtd)
return -ENXIO;
-
+
if (parsed_nr_parts > 0) {
parts = parsed_parts;
nb_parts = parsed_nr_parts;
@@ -108,8 +108,8 @@ static int __init init_flash (void)
}
return 0;
}
-
-int __init omap_toto_mtd_init(void)
+
+int __init omap_toto_mtd_init(void)
{
int status;
@@ -119,7 +119,7 @@ int __init omap_toto_mtd_init(void)
return status;
}
-static void __exit omap_toto_mtd_cleanup(void)
+static void __exit omap_toto_mtd_cleanup(void)
{
if (flash_mtd) {
del_mtd_partitions(flash_mtd);
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 7f370bb794fe..fd3b4a5fc207 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
* Copyright (C) 2003-2004 Texas Instruments
- * Copyright (C) 2004 Nokia Corporation
+ * Copyright (C) 2004 Nokia Corporation
*
* Assembled using driver code copyright the companies above
* and written by David Brownell, Jian Zhang <jzhang@ti.com>,
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index d9c64e99ee32..8b3570b09095 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,8 +7,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * $Id: pci.c,v 1.10 2005/03/18 14:04:35 gleixner Exp $
- *
+ * $Id: pci.c,v 1.13 2005/11/07 11:14:27 gleixner Exp $
+ *
* Generic PCI memory map driver. We support the following boards:
* - Intel IQ80310 ATU.
* - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
@@ -38,7 +38,7 @@ struct map_pci_info {
void (*exit)(struct pci_dev *dev, struct map_pci_info *map);
unsigned long (*translate)(struct map_pci_info *map, unsigned long ofs);
struct pci_dev *dev;
-};
+};
static map_word mtd_pci_read8(struct map_info *_map, unsigned long ofs)
{
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index ff7c50d10180..af24216a0626 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -1,5 +1,5 @@
/*
- * $Id: pcmciamtd.c,v 1.51 2004/07/12 22:38:29 dwmw2 Exp $
+ * $Id: pcmciamtd.c,v 1.55 2005/11/07 11:14:28 gleixner Exp $
*
* pcmciamtd.c - MTD driver for PCMCIA flash memory cards
*
@@ -48,7 +48,7 @@ static const int debug = 0;
#define DRIVER_DESC "PCMCIA Flash memory card driver"
-#define DRIVER_VERSION "$Revision: 1.51 $"
+#define DRIVER_VERSION "$Revision: 1.55 $"
/* Size of the PCMCIA address space: 26 bits = 64 MB */
#define MAX_PCMCIA_ADDR 0x4000000
@@ -176,7 +176,7 @@ static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long
if(toread > len)
toread = len;
-
+
addr = remap_window(map, from);
if(!addr)
return;
@@ -386,7 +386,7 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
cs_error(link->handle, ParseTuple, rc);
break;
}
-
+
switch(tuple.TupleCode) {
case CISTPL_FORMAT: {
cistpl_format_t *t = &parse.format;
@@ -394,9 +394,9 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
t->type, t->edc, t->offset, t->length);
break;
-
+
}
-
+
case CISTPL_DEVICE: {
cistpl_device_t *t = &parse.device;
int i;
@@ -410,7 +410,7 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
}
break;
}
-
+
case CISTPL_VERS_1: {
cistpl_vers_1_t *t = &parse.version_1;
int i;
@@ -425,7 +425,7 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
DEBUG(2, "Found name: %s", dev->mtd_name);
break;
}
-
+
case CISTPL_JEDEC_C: {
cistpl_jedec_t *t = &parse.jedec;
int i;
@@ -434,7 +434,7 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
}
break;
}
-
+
case CISTPL_DEVICE_GEO: {
cistpl_device_geo_t *t = &parse.device_geo;
int i;
@@ -449,11 +449,11 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
}
break;
}
-
+
default:
DEBUG(2, "Unknown tuple code %d", tuple.TupleCode);
}
-
+
rc = pcmcia_get_next_tuple(link->handle, &tuple);
}
if(!dev->pcmcia_map.size)
@@ -470,7 +470,7 @@ static void card_settings(struct pcmciamtd_dev *dev, dev_link_t *link, int *new_
if(bankwidth) {
dev->pcmcia_map.bankwidth = bankwidth;
DEBUG(2, "bankwidth forced to %d", bankwidth);
- }
+ }
dev->pcmcia_map.name = dev->mtd_name;
if(!dev->mtd_name[0]) {
@@ -568,7 +568,7 @@ static void pcmciamtd_config(dev_link_t *link)
return;
}
DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
-
+
/* Get write protect status */
CS_CHECK(GetStatus, pcmcia_get_status(link->handle, &status));
DEBUG(2, "status value: 0x%x window handle = 0x%8.8lx",
@@ -624,11 +624,11 @@ static void pcmciamtd_config(dev_link_t *link)
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
break;
-
+
DEBUG(1, "FAILED: %s", probes[i]);
}
}
-
+
if(!mtd) {
DEBUG(1, "Cant find an MTD");
pcmciamtd_release(link);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index b853670bfb81..9ee760f97bc6 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,5 +1,5 @@
/*
- * $Id: physmap.c,v 1.37 2004/11/28 09:40:40 dwmw2 Exp $
+ * $Id: physmap.c,v 1.38 2005/11/07 11:14:28 gleixner Exp $
*
* Normal mappings of chips in physical memory
*
@@ -69,7 +69,7 @@ static int __init init_physmap(void)
mymtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
- mtd_parts_nb = parse_mtd_partitions(mymtd, part_probes,
+ mtd_parts_nb = parse_mtd_partitions(mymtd, part_probes,
&mtd_parts, 0);
if (mtd_parts_nb > 0)
@@ -78,9 +78,9 @@ static int __init init_physmap(void)
return 0;
}
- if (num_physmap_partitions != 0)
+ if (num_physmap_partitions != 0)
{
- printk(KERN_NOTICE
+ printk(KERN_NOTICE
"Using physmap partition definition\n");
add_mtd_partitions (mymtd, physmap_partitions, num_physmap_partitions);
return 0;
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 104576b5be34..a02eed94a231 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -6,7 +6,7 @@
*
* Generic platfrom device based RAM map
*
- * $Id: plat-ram.c,v 1.3 2005/03/19 22:41:27 gleixner Exp $
+ * $Id: plat-ram.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -91,7 +91,7 @@ static int platram_remove(struct device *dev)
dev_dbg(dev, "removing device\n");
- if (info == NULL)
+ if (info == NULL)
return 0;
if (info->mtd) {
@@ -118,7 +118,7 @@ static int platram_remove(struct device *dev)
if (info->map.virt != NULL)
iounmap(info->map.virt);
-
+
kfree(info);
return 0;
@@ -139,7 +139,7 @@ static int platram_probe(struct device *dev)
int err = 0;
dev_dbg(dev, "probe entered\n");
-
+
if (dev->platform_data == NULL) {
dev_err(dev, "no platform data supplied\n");
err = -ENOENT;
@@ -177,7 +177,7 @@ static int platram_probe(struct device *dev)
info->map.phys = res->start;
info->map.size = (res->end - res->start) + 1;
- info->map.name = pdata->mapname != NULL ? pdata->mapname : pd->name;
+ info->map.name = pdata->mapname != NULL ? pdata->mapname : (char *)pd->name;
info->map.bankwidth = pdata->bankwidth;
/* register our usage of the memory area */
@@ -240,7 +240,7 @@ static int platram_probe(struct device *dev)
dev_err(dev, "add_mtd_device() failed\n");
err = -ENOMEM;
}
-
+
dev_info(dev, "registered mtd device\n");
return err;
@@ -254,6 +254,7 @@ static int platram_probe(struct device *dev)
static struct device_driver platram_driver = {
.name = "mtd-ram",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = platram_probe,
.remove = platram_remove,
diff --git a/drivers/mtd/maps/pnc2000.c b/drivers/mtd/maps/pnc2000.c
index a0f43dad8985..d7e16c2d5c44 100644
--- a/drivers/mtd/maps/pnc2000.c
+++ b/drivers/mtd/maps/pnc2000.c
@@ -5,7 +5,7 @@
*
* This code is GPL
*
- * $Id: pnc2000.c,v 1.17 2004/11/16 18:29:02 dwmw2 Exp $
+ * $Id: pnc2000.c,v 1.18 2005/11/07 11:14:28 gleixner Exp $
*/
#include <linux/module.h>
@@ -21,7 +21,7 @@
#define WINDOW_ADDR 0xbf000000
#define WINDOW_SIZE 0x00400000
-/*
+/*
* MAP DRIVER STUFF
*/
@@ -36,7 +36,7 @@ static struct map_info pnc_map = {
/*
- * MTD 'PARTITIONING' STUFF
+ * MTD 'PARTITIONING' STUFF
*/
static struct mtd_partition pnc_partitions[3] = {
{
@@ -56,7 +56,7 @@ static struct mtd_partition pnc_partitions[3] = {
}
};
-/*
+/*
* This is the master MTD device for which all the others are just
* auto-relocating aliases.
*/
diff --git a/drivers/mtd/maps/pq2fads.c b/drivers/mtd/maps/pq2fads.c
new file mode 100644
index 000000000000..fb78d87cc130
--- /dev/null
+++ b/drivers/mtd/maps/pq2fads.c
@@ -0,0 +1,88 @@
+/*
+ * drivers/mtd/maps/pq2fads.c
+ *
+ * Mapping for the flash SIMM on 8272ADS and PQ2FADS board
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/ppcboot.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+/*
+ NOTE: bank width and interleave relative to the installed flash
+ should have been chosen within MTD_CFI_GEOMETRY options.
+ */
+#define PQ2FADS_BANK_WIDTH 4
+
+static struct mtd_partition pq2fads_partitions[] = {
+ {
+#ifdef CONFIG_ADS8272
+ .name = "HRCW",
+ .size = 0x40000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "User FS",
+ .size = 0x5c0000,
+ .offset = 0x40000,
+#else
+ .name = "User FS",
+ .size = 0x600000,
+ .offset = 0,
+#endif
+ }, {
+ .name = "uImage",
+ .size = 0x100000,
+ .offset = 0x600000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "bootloader",
+ .size = 0x40000,
+ .offset = 0x700000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "bootloader env",
+ .size = 0x40000,
+ .offset = 0x740000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }
+};
+
+
+/* pointer to MPC885ADS board info data */
+extern unsigned char __res[];
+
+static int __init init_pq2fads_mtd(void)
+{
+ bd_t *bd = (bd_t *)__res;
+ physmap_configure(bd->bi_flashstart, bd->bi_flashsize, PQ2FADS_BANK_WIDTH, NULL);
+
+ physmap_set_partitions(pq2fads_partitions,
+ sizeof (pq2fads_partitions) /
+ sizeof (pq2fads_partitions[0]));
+ return 0;
+}
+
+static void __exit cleanup_pq2fads_mtd(void)
+{
+}
+
+module_init(init_pq2fads_mtd);
+module_exit(cleanup_pq2fads_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map and partitions for MPC8272ADS boards");
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index edd01ee4f90b..5b76ed886185 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -1,5 +1,5 @@
/*
- * $Id: redwood.c,v 1.10 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: redwood.c,v 1.11 2005/11/07 11:14:28 gleixner Exp $
*
* drivers/mtd/maps/redwood.c
*
@@ -79,7 +79,7 @@ static struct mtd_partition redwood_flash_partitions[] = {
#define RW_PART0_OF 0
#define RW_PART0_SZ 0x400000 /* 4 MiB data */
-#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ
+#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ
#define RW_PART1_SZ 0x10000 /* 64K VPD */
#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ
#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000)
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index a31f6ee8a4be..9e8bb1782be0 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -1,9 +1,9 @@
/*
* Flash memory access on SA11x0 based devices
- *
+ *
* (C) 2000 Nicolas Pitre <nico@cam.org>
- *
- * $Id: sa1100-flash.c,v 1.47 2004/11/01 13:44:36 rmk Exp $
+ *
+ * $Id: sa1100-flash.c,v 1.51 2005/11/07 11:14:28 gleixner Exp $
*/
#include <linux/config.h>
#include <linux/module.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index da684d3384e9..225cdd9ba5b2 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -5,7 +5,7 @@
*
* This code is GPLed
*
- * $Id: sbc8240.c,v 1.4 2004/07/12 22:38:29 dwmw2 Exp $
+ * $Id: sbc8240.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
*
*/
@@ -205,7 +205,7 @@ int __init init_sbc8240_mtd (void)
} else {
printk (KERN_NOTICE MSG_PREFIX
"Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
- add_mtd_partitions (sbc8240_mtd[i],
+ add_mtd_partitions (sbc8240_mtd[i],
sbc8240_part_banks[i].mtd_part,
sbc8240_part_banks[i].nums);
}
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 65add28bde14..7cc4041d096d 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -1,35 +1,35 @@
/* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
SBC-GXm and SBC-GX1 series boards.
-
+
Copyright (C) 2001 Arcom Control System Ltd
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- $Id: sbc_gxx.c,v 1.33 2004/11/28 09:40:40 dwmw2 Exp $
+ $Id: sbc_gxx.c,v 1.35 2005/11/07 11:14:28 gleixner Exp $
-The SBC-MediaGX / SBC-GXx has up to 16 MiB of
-Intel StrataFlash (28F320/28F640) in x8 mode.
+The SBC-MediaGX / SBC-GXx has up to 16 MiB of
+Intel StrataFlash (28F320/28F640) in x8 mode.
This driver uses the CFI probe and Intel Extended Command Set drivers.
The flash is accessed as follows:
16 KiB memory window at 0xdc000-0xdffff
-
+
Two IO address locations for paging
-
+
0x258
bit 0-7: address bit 14-21
0x259
@@ -37,7 +37,7 @@ The flash is accessed as follows:
bit 7: 0 - reset/powered down
1 - device enabled
-The single flash device is divided into 3 partition which appear as
+The single flash device is divided into 3 partition which appear as
separate MTD devices.
25/04/2001 AJL (Arcom) Modified signon strings and partition sizes
@@ -87,17 +87,17 @@ static volatile int page_in_window = -1; // Current page in window.
static void __iomem *iomapadr;
static DEFINE_SPINLOCK(sbc_gxx_spin);
-/* partition_info gives details on the logical partitions that the split the
+/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
static struct mtd_partition partition_info[]={
- { .name = "SBC-GXx flash boot partition",
- .offset = 0,
+ { .name = "SBC-GXx flash boot partition",
+ .offset = 0,
.size = BOOT_PARTITION_SIZE_KiB*1024 },
- { .name = "SBC-GXx flash data partition",
- .offset = BOOT_PARTITION_SIZE_KiB*1024,
+ { .name = "SBC-GXx flash data partition",
+ .offset = BOOT_PARTITION_SIZE_KiB*1024,
.size = (DATA_PARTITION_SIZE_KiB)*1024 },
- { .name = "SBC-GXx flash application partition",
+ { .name = "SBC-GXx flash application partition",
.offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
};
@@ -130,7 +130,7 @@ static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-
+
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, from);
memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
@@ -150,12 +150,12 @@ static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
}
static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
+{
while(len) {
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
+
spin_lock(&sbc_gxx_spin);
sbc_gxx_page(map, to);
memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
@@ -201,7 +201,7 @@ static int __init init_sbc_gxx(void)
sbc_gxx_map.name );
return -EIO;
}
-
+
if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
sbc_gxx_map.name,
@@ -209,8 +209,8 @@ static int __init init_sbc_gxx(void)
iounmap(iomapadr);
return -EAGAIN;
}
-
-
+
+
printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
sbc_gxx_map.name,
PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
@@ -222,7 +222,7 @@ static int __init init_sbc_gxx(void)
cleanup_sbc_gxx();
return -ENXIO;
}
-
+
all_mtd->owner = THIS_MODULE;
/* Create MTD devices for each partition. */
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index a06ed21e7ed1..6fb9f3c57aab 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*
- * $Id: sc520cdp.c,v 1.21 2004/12/13 10:27:08 dedekind Exp $
+ * $Id: sc520cdp.c,v 1.22 2005/11/07 11:14:28 gleixner Exp $
*
*
* The SC520CDP is an evaluation board for the Elan SC520 processor available
@@ -231,7 +231,7 @@ static void sc520cdp_setup_par(void)
static int __init init_sc520cdp(void)
{
int i, devices_found = 0;
-
+
#ifdef REPROGRAM_PAR
/* reprogram PAR registers so flash appears at the desired addresses */
sc520cdp_setup_par();
@@ -278,7 +278,7 @@ static int __init init_sc520cdp(void)
static void __exit cleanup_sc520cdp(void)
{
int i;
-
+
if (merged_mtd) {
del_mtd_device(merged_mtd);
mtd_concat_destroy(merged_mtd);
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 0ece3786d6ea..2c91dff8bb60 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -1,8 +1,8 @@
-/* linux/drivers/mtd/maps/scx200_docflash.c
+/* linux/drivers/mtd/maps/scx200_docflash.c
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
- $Id: scx200_docflash.c,v 1.10 2004/11/28 09:40:40 dwmw2 Exp $
+ $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
National Semiconductor SCx200 flash mapped with DOCCS
*/
@@ -49,23 +49,23 @@ static struct mtd_info *mymtd;
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition partition_info[] = {
- {
- .name = "DOCCS Boot kernel",
- .offset = 0,
+ {
+ .name = "DOCCS Boot kernel",
+ .offset = 0,
.size = 0xc0000
},
- {
- .name = "DOCCS Low BIOS",
- .offset = 0xc0000,
+ {
+ .name = "DOCCS Low BIOS",
+ .offset = 0xc0000,
.size = 0x40000
},
- {
- .name = "DOCCS File system",
- .offset = 0x100000,
+ {
+ .name = "DOCCS File system",
+ .offset = 0x100000,
.size = ~0 /* calculate from flash size */
},
- {
- .name = "DOCCS High BIOS",
+ {
+ .name = "DOCCS High BIOS",
.offset = ~0, /* calculate from flash size */
.size = 0x80000
},
@@ -88,7 +88,7 @@ static int __init init_scx200_docflash(void)
printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
- if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
+ if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
PCI_DEVICE_ID_NS_SCx200_BRIDGE,
NULL)) == NULL)
return -ENODEV;
@@ -134,28 +134,28 @@ static int __init init_scx200_docflash(void)
printk(KERN_ERR NAME ": invalid size for flash mapping\n");
return -EINVAL;
}
-
+
if (width != 8 && width != 16) {
printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
return -EINVAL;
}
-
- if (allocate_resource(&iomem_resource, &docmem,
+
+ if (allocate_resource(&iomem_resource, &docmem,
size,
- 0xc0000000, 0xffffffff,
+ 0xc0000000, 0xffffffff,
size, NULL, NULL)) {
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
return -ENOMEM;
}
-
+
ctrl = 0x07000000 | ((size-1) >> 13);
printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
-
+
pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
pmr = inl(scx200_cb_base + SCx200_PMR);
-
+
if (width == 8) {
pmr &= ~(1<<6);
} else {
@@ -163,8 +163,8 @@ static int __init init_scx200_docflash(void)
}
outl(pmr, scx200_cb_base + SCx200_PMR);
}
-
- printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n",
+
+ printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n",
docmem.start, docmem.end, width);
scx200_docflash_map.size = size;
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index b7f093fbf9b0..999f4bb3d845 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -1,10 +1,10 @@
/*
* sharpsl-flash.c
- *
+ *
* Copyright (C) 2001 Lineo Japan, Inc.
* Copyright (C) 2002 SHARP
*
- * $Id: sharpsl-flash.c,v 1.5 2005/03/21 08:42:11 rpurdie Exp $
+ * $Id: sharpsl-flash.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
*
* based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
* Handle mapping of the flash on the RPX Lite and CLLF boards
@@ -57,7 +57,7 @@ int __init init_sharpsl(void)
int nb_parts = 0;
char *part_type = "static";
- printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n",
+ printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n",
WINDOW_SIZE, WINDOW_ADDR);
sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
if (!sharpsl_map.virt) {
@@ -75,7 +75,7 @@ int __init init_sharpsl(void)
mymtd->owner = THIS_MODULE;
- if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky()
+ if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky()
|| machine_is_poodle()) {
sharpsl_partitions[0].size=0x006d0000;
sharpsl_partitions[0].offset=0x00120000;
@@ -87,10 +87,10 @@ int __init init_sharpsl(void)
sharpsl_partitions[0].offset=0x00140000;
} else {
map_destroy(mymtd);
- iounmap(sharpsl_map.virt);
+ iounmap(sharpsl_map.virt);
return -ENODEV;
}
-
+
parts = sharpsl_partitions;
nb_parts = NB_OF(sharpsl_partitions);
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index 8ce5d897645c..c53c2c369c9d 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -1,5 +1,5 @@
/*
- * $Id: solutionengine.c,v 1.14 2004/09/16 23:27:14 gleixner Exp $
+ * $Id: solutionengine.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
*
* Flash and EPROM on Hitachi Solution Engine and similar boards.
*
@@ -67,7 +67,7 @@ static int __init init_soleng_maps(void)
soleng_eprom_map.virt = (void __iomem *)P1SEGADDR(0x01000000);
simple_map_init(&soleng_eprom_map);
simple_map_init(&soleng_flash_map);
-
+
printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
flash_mtd = do_map_probe("cfi_probe", &soleng_flash_map);
if (!flash_mtd) {
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 1355c28f90a4..0758cb1d0105 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -1,4 +1,4 @@
-/* $Id: sun_uflash.c,v 1.11 2004/11/04 13:24:15 gleixner Exp $
+/* $Id: sun_uflash.c,v 1.13 2005/11/07 11:14:28 gleixner Exp $
*
* sun_uflash - Driver implementation for user-programmable flash
* present on many Sun Microsystems SME boardsets.
@@ -63,7 +63,7 @@ int uflash_devinit(struct linux_ebus_device* edev)
iTmp = prom_getproperty(
edev->prom_node, "reg", (void *)regs, sizeof(regs));
if ((iTmp % sizeof(regs[0])) != 0) {
- printk("%s: Strange reg property size %d\n",
+ printk("%s: Strange reg property size %d\n",
UFLASH_DEVNAME, iTmp);
return -ENODEV;
}
@@ -75,7 +75,7 @@ int uflash_devinit(struct linux_ebus_device* edev)
* can work on supporting it.
*/
printk("%s: unsupported device at 0x%lx (%d regs): " \
- "email ebrower@usa.net\n",
+ "email ebrower@usa.net\n",
UFLASH_DEVNAME, edev->resource[0].start, nregs);
return -ENODEV;
}
@@ -84,7 +84,7 @@ int uflash_devinit(struct linux_ebus_device* edev)
printk("%s: unable to kmalloc new device\n", UFLASH_DEVNAME);
return(-ENOMEM);
}
-
+
/* copy defaults and tweak parameters */
memcpy(&pdev->map, &uflash_map_templ, sizeof(uflash_map_templ));
pdev->map.size = regs[0].reg_size;
@@ -155,7 +155,7 @@ static void __exit uflash_cleanup(void)
list_for_each(udevlist, &device_list) {
udev = list_entry(udevlist, struct uflash_dev, list);
- DEBUG(2, "%s: removing device %s\n",
+ DEBUG(2, "%s: removing device %s\n",
UFLASH_DEVNAME, udev->name);
if(0 != udev->mtd) {
@@ -168,7 +168,7 @@ static void __exit uflash_cleanup(void)
}
kfree(udev->name);
kfree(udev);
- }
+ }
}
module_init(uflash_init);
diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c
new file mode 100644
index 000000000000..c7ae9a515c1a
--- /dev/null
+++ b/drivers/mtd/maps/tqm834x.c
@@ -0,0 +1,291 @@
+/*
+ * drivers/mtd/maps/tqm834x.c
+ *
+ * MTD mapping driver for TQM834x boards
+ *
+ * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/ppcboot.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define FLASH_BANK_MAX 2
+
+extern unsigned char __res[];
+
+/* trivial struct to describe partition information */
+struct mtd_part_def
+{
+ int nums;
+ unsigned char *type;
+ struct mtd_partition* mtd_part;
+};
+
+static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
+static struct map_info* map_banks[FLASH_BANK_MAX];
+static struct mtd_part_def part_banks[FLASH_BANK_MAX];
+
+static unsigned long num_banks;
+static unsigned long start_scan_addr;
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * The following defines the partition layout of TQM834x boards.
+ *
+ * See include/linux/mtd/partitions.h for definition of the
+ * mtd_partition structure.
+ *
+ * Assume minimal initial size of 4 MiB per bank, will be updated
+ * later in init_tqm834x_mtd() routine.
+ */
+
+/* Partition definition for the first flash bank which is always present. */
+static struct mtd_partition tqm834x_partitions_bank1[] = {
+ {
+ .name = "u-boot", /* u-boot firmware */
+ .offset = 0x00000000,
+ .size = 0x00040000, /* 256 KiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ .name = "env", /* u-boot environment */
+ .offset = 0x00040000,
+ .size = 0x00020000, /* 128 KiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ .name = "kernel", /* linux kernel image */
+ .offset = 0x00060000,
+ .size = 0x00100000, /* 1 MiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ .name = "initrd", /* ramdisk image */
+ .offset = 0x00160000,
+ .size = 0x00200000, /* 2 MiB */
+ },
+ {
+ .name = "user", /* user data */
+ .offset = 0x00360000,
+ .size = 0x000a0000, /* remaining space */
+ /* NOTE: this parttion size is re-calcated in */
+ /* init_tqm834x_mtd() to cover actual remaining space. */
+ },
+};
+
+/* Partition definition for the second flash bank which may be present on some
+ * TQM834x boards.
+ */
+static struct mtd_partition tqm834x_partitions_bank2[] = {
+ {
+ .name = "jffs2", /* jffs2 filesystem */
+ .offset = 0x00000000,
+ .size = 0x00400000, /* whole device */
+ /* NOTE: this parttion size is re-calcated in */
+ /* init_tqm834x_mtd() to cover actual device size. */
+ },
+};
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static int __init init_tqm834x_mtd(void)
+{
+ int idx = 0, ret = 0;
+ unsigned long flash_addr, flash_size, mtd_size = 0;
+
+ /* pointer to TQM834x board info data */
+ bd_t *bd = (bd_t *)__res;
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ int n;
+ char mtdid[4];
+ const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+ flash_addr = bd->bi_flashstart;
+ flash_size = bd->bi_flashsize;
+
+ /* request maximum flash size address space */
+ start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size);
+ if (!start_scan_addr) {
+ printk("%s: Failed to ioremap address: 0x%lx\n",
+ __FUNCTION__, flash_addr);
+ return -EIO;
+ }
+
+ for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+ if (mtd_size >= flash_size)
+ break;
+
+ pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx);
+
+ map_banks[idx] =
+ (struct map_info *)kmalloc(sizeof(struct map_info),
+ GFP_KERNEL);
+ if (map_banks[idx] == NULL) {
+ ret = -ENOMEM;
+ goto error_mem;
+ }
+ memset((void *)map_banks[idx], 0, sizeof(struct map_info));
+ map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+ if (map_banks[idx]->name == NULL) {
+ ret = -ENOMEM;
+ goto error_mem;
+ }
+ memset((void *)map_banks[idx]->name, 0, 16);
+
+ sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
+ map_banks[idx]->size = flash_size;
+ map_banks[idx]->bankwidth = 4;
+
+ simple_map_init(map_banks[idx]);
+
+ map_banks[idx]->virt = (void __iomem *)
+ (start_scan_addr + ((idx > 0) ?
+ (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0));
+ map_banks[idx]->phys =
+ flash_addr + ((idx > 0) ?
+ (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
+
+ /* start to probe flash chips */
+ mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
+ if (mtd_banks[idx]) {
+ mtd_banks[idx]->owner = THIS_MODULE;
+ mtd_size += mtd_banks[idx]->size;
+ num_banks++;
+ pr_debug("%s: bank %ld, name: %s, size: %d bytes \n",
+ __FUNCTION__, num_banks,
+ mtd_banks[idx]->name, mtd_banks[idx]->size);
+ }
+ }
+
+ /* no supported flash chips found */
+ if (!num_banks) {
+ printk("TQM834x: No supported flash chips found!\n");
+ ret = -ENXIO;
+ goto error_mem;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ /*
+ * Select static partition definitions
+ */
+ n = ARRAY_SIZE(tqm834x_partitions_bank1);
+ part_banks[0].mtd_part = tqm834x_partitions_bank1;
+ part_banks[0].type = "static image bank1";
+ part_banks[0].nums = n;
+
+ /* update last partition size to cover actual remaining space */
+ tqm834x_partitions_bank1[n - 1].size =
+ mtd_banks[0]->size -
+ tqm834x_partitions_bank1[n - 1].offset;
+
+ /* check if we have second bank? */
+ if (num_banks == 2) {
+ n = ARRAY_SIZE(tqm834x_partitions_bank2);
+ part_banks[1].mtd_part = tqm834x_partitions_bank2;
+ part_banks[1].type = "static image bank2";
+ part_banks[1].nums = n;
+
+ /* update last partition size to cover actual remaining space */
+ tqm834x_partitions_bank2[n - 1].size =
+ mtd_banks[1]->size -
+ tqm834x_partitions_bank2[n - 1].offset;
+ }
+
+ for(idx = 0; idx < num_banks ; idx++) {
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ sprintf(mtdid, "%d", idx);
+ n = parse_mtd_partitions(mtd_banks[idx],
+ part_probes,
+ &part_banks[idx].mtd_part,
+ 0);
+ pr_debug("%s: %d command line partitions on bank %s\n",
+ __FUNCTION__, n, mtdid);
+ if (n > 0) {
+ part_banks[idx].type = "command line";
+ part_banks[idx].nums = n;
+ }
+#endif /* CONFIG_MTD_CMDLINE_PARTS */
+ if (part_banks[idx].nums == 0) {
+ printk(KERN_NOTICE
+ "TQM834x flash bank %d: no partition info "
+ "available, registering whole device\n", idx);
+ add_mtd_device(mtd_banks[idx]);
+ } else {
+ printk(KERN_NOTICE
+ "TQM834x flash bank %d: Using %s partition "
+ "definition\n", idx, part_banks[idx].type);
+ add_mtd_partitions(mtd_banks[idx],
+ part_banks[idx].mtd_part,
+ part_banks[idx].nums);
+ }
+ }
+#else /* ! CONFIG_MTD_PARTITIONS */
+ printk(KERN_NOTICE "TQM834x flash: registering %d flash banks "
+ "at once\n", num_banks);
+
+ for(idx = 0 ; idx < num_banks ; idx++)
+ add_mtd_device(mtd_banks[idx]);
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+ return 0;
+error_mem:
+ for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+ if (map_banks[idx] != NULL) {
+ if (map_banks[idx]->name != NULL) {
+ kfree(map_banks[idx]->name);
+ map_banks[idx]->name = NULL;
+ }
+ kfree(map_banks[idx]);
+ map_banks[idx] = NULL;
+ }
+ }
+
+ iounmap((void *)start_scan_addr);
+
+ return ret;
+}
+
+static void __exit cleanup_tqm834x_mtd(void)
+{
+ unsigned int idx = 0;
+ for(idx = 0 ; idx < num_banks ; idx++) {
+ /* destroy mtd_info previously allocated */
+ if (mtd_banks[idx]) {
+ del_mtd_partitions(mtd_banks[idx]);
+ map_destroy(mtd_banks[idx]);
+ }
+
+ /* release map_info not used anymore */
+ kfree(map_banks[idx]->name);
+ kfree(map_banks[idx]);
+ }
+
+ if (start_scan_addr) {
+ iounmap((void *)start_scan_addr);
+ start_scan_addr = 0;
+ }
+}
+
+module_init(init_tqm834x_mtd);
+module_exit(cleanup_tqm834x_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>");
+MODULE_DESCRIPTION("MTD map driver for TQM834x boards");
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 0aca8179f27f..a43517053e7c 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -1,15 +1,15 @@
/*
- * Handle mapping of the flash memory access routines
+ * Handle mapping of the flash memory access routines
* on TQM8xxL based devices.
*
- * $Id: tqm8xxl.c,v 1.13 2004/10/20 22:21:53 dwmw2 Exp $
+ * $Id: tqm8xxl.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
*
* based on rpxlite.c
*
* Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
*
* This code is GPLed
- *
+ *
*/
/*
@@ -19,7 +19,7 @@
* 2MiB 512Kx16 2MiB 0
* 4MiB 1Mx16 4MiB 0
* 8MiB 1Mx16 4MiB 4MiB
- * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
+ * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
* kernel configuration.
*/
#include <linux/config.h>
@@ -58,9 +58,9 @@ static void __iomem *start_scan_addr;
* Here are partition information for all known TQM8xxL series devices.
* See include/linux/mtd/partitions.h for definition of the mtd_partition
* structure.
- *
+ *
* The *_max_flash_size is the maximum possible mapped flash size which
- * is not necessarily the actual flash size. It must correspond to the
+ * is not necessarily the actual flash size. It must correspond to the
* value specified in the mapping definition defined by the
* "struct map_desc *_io_desc" for the corresponding machine.
*/
@@ -132,9 +132,9 @@ int __init init_tqm_mtd(void)
for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
if(mtd_size >= flash_size)
break;
-
+
printk(KERN_INFO "%s: chip probing count %d\n", __FUNCTION__, idx);
-
+
map_banks[idx] = (struct map_info *)kmalloc(sizeof(struct map_info), GFP_KERNEL);
if(map_banks[idx] == NULL) {
ret = -ENOMEM;
@@ -180,7 +180,7 @@ int __init init_tqm_mtd(void)
mtd_size += mtd_banks[idx]->size;
num_banks++;
- printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __FUNCTION__, num_banks,
+ printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __FUNCTION__, num_banks,
mtd_banks[idx]->name, mtd_banks[idx]->size);
}
}
@@ -211,7 +211,7 @@ int __init init_tqm_mtd(void)
} else {
printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
idx, part_banks[idx].type);
- add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part,
+ add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part,
part_banks[idx].nums);
}
}
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index 3ebd90f56503..4b372bcb17f1 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -19,26 +19,22 @@
*
* Note:
* - In order for detection to work, jumper 3 must be set.
- * - Drive A and B use a proprietary FTL from General Software which isn't
- * supported as of yet so standard drives can't be mounted; you can create
- * your own (e.g. jffs) file system.
- * - If you have created your own jffs file system and the bios overwrites
+ * - Drive A and B use the resident flash disk (RFD) flash translation layer.
+ * - If you have created your own jffs file system and the bios overwrites
* it during boot, try disabling Drive A: and B: in the boot order.
*
- * $Id: ts5500_flash.c,v 1.2 2004/11/28 09:40:40 dwmw2 Exp $
+ * $Id: ts5500_flash.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
*/
#include <linux/config.h>
+#include <linux/init.h>
#include <linux/module.h>
-#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
+#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#endif
+#include <linux/types.h>
+
#define WINDOW_ADDR 0x09400000
#define WINDOW_SIZE 0x00200000
@@ -50,7 +46,6 @@ static struct map_info ts5500_map = {
.phys = WINDOW_ADDR
};
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ts5500_partitions[] = {
{
.name = "Drive A",
@@ -71,8 +66,6 @@ static struct mtd_partition ts5500_partitions[] = {
#define NUM_PARTITIONS (sizeof(ts5500_partitions)/sizeof(struct mtd_partition))
-#endif
-
static struct mtd_info *mymtd;
static int __init init_ts5500_map(void)
@@ -81,48 +74,39 @@ static int __init init_ts5500_map(void)
ts5500_map.virt = ioremap_nocache(ts5500_map.phys, ts5500_map.size);
- if(!ts5500_map.virt) {
+ if (!ts5500_map.virt) {
printk(KERN_ERR "Failed to ioremap_nocache\n");
rc = -EIO;
- goto err_out_ioremap;
+ goto err2;
}
simple_map_init(&ts5500_map);
mymtd = do_map_probe("jedec_probe", &ts5500_map);
- if(!mymtd)
+ if (!mymtd)
mymtd = do_map_probe("map_rom", &ts5500_map);
- if(!mymtd) {
+ if (!mymtd) {
rc = -ENXIO;
- goto err_out_map;
+ goto err1;
}
mymtd->owner = THIS_MODULE;
-#ifdef CONFIG_MTD_PARTITIONS
add_mtd_partitions(mymtd, ts5500_partitions, NUM_PARTITIONS);
-#else
- add_mtd_device(mymtd);
-#endif
return 0;
-err_out_map:
+err1:
map_destroy(mymtd);
-err_out_ioremap:
iounmap(ts5500_map.virt);
-
+err2:
return rc;
}
static void __exit cleanup_ts5500_map(void)
{
if (mymtd) {
-#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(mymtd);
-#else
- del_mtd_device(mymtd);
-#endif
map_destroy(mymtd);
}
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 170d71239e5e..9e21e6c02f80 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -2,7 +2,7 @@
* tsunami_flash.c
*
* flash chip on alpha ds10...
- * $Id: tsunami_flash.c,v 1.9 2004/07/14 09:52:55 dwmw2 Exp $
+ * $Id: tsunami_flash.c,v 1.10 2005/11/07 11:14:29 gleixner Exp $
*/
#include <asm/io.h>
#include <asm/core_tsunami.h>
@@ -41,7 +41,7 @@ static void tsunami_flash_copy_from(
}
static void tsunami_flash_copy_to(
- struct map_info *map, unsigned long offset,
+ struct map_info *map, unsigned long offset,
const void *addr, ssize_t len)
{
const unsigned char *src;
@@ -90,7 +90,7 @@ static int __init init_tsunami_flash(void)
char **type;
tsunami_tig_writeb(FLASH_ENABLE_BYTE, FLASH_ENABLE_PORT);
-
+
tsunami_flash_mtd = 0;
type = rom_probe_types;
for(; !tsunami_flash_mtd && *type; type++) {
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index cc372136e852..79d92808b766 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -5,7 +5,7 @@
*
* (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
*
- * $Id: uclinux.c,v 1.10 2005/01/05 18:05:13 dwmw2 Exp $
+ * $Id: uclinux.c,v 1.12 2005/11/07 11:14:29 gleixner Exp $
*/
/****************************************************************************/
@@ -82,7 +82,7 @@ int __init uclinux_mtd_init(void)
iounmap(mapp->virt);
return(-ENXIO);
}
-
+
mtd->owner = THIS_MODULE;
mtd->point = uclinux_point;
mtd->priv = mapp;
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index c8c74110ed1b..e0063941c0df 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -1,19 +1,19 @@
-// $Id: vmax301.c,v 1.30 2004/07/12 22:38:29 dwmw2 Exp $
+// $Id: vmax301.c,v 1.32 2005/11/07 11:14:29 gleixner Exp $
/* ######################################################################
Tempustech VMAX SBC301 MTD Driver.
-
+
The VMAx 301 is a SBC based on . It
comes with three builtin AMD 29F016B flash chips and a socket for SRAM or
- more flash. Each unit has it's own 8k mapping into a settable region
+ more flash. Each unit has it's own 8k mapping into a settable region
(0xD8000). There are two 8k mappings for each MTD, the first is always set
to the lower 8k of the device the second is paged. Writing a 16 bit page
value to anywhere in the first 8k will cause the second 8k to page around.
- To boot the device a bios extension must be installed into the first 8k
- of flash that is smart enough to copy itself down, page in the rest of
+ To boot the device a bios extension must be installed into the first 8k
+ of flash that is smart enough to copy itself down, page in the rest of
itself and begin executing.
-
+
##################################################################### */
#include <linux/module.h>
@@ -35,7 +35,7 @@
/* Actually we could use two spinlocks, but we'd have to have
more private space in the struct map_info. We lose a little
performance like this, but we'd probably lose more by having
- the extra indirection from having one of the map->map_priv
+ the extra indirection from having one of the map->map_priv
fields pointing to yet another private struct.
*/
static DEFINE_SPINLOCK(vmax301_spin);
@@ -98,7 +98,7 @@ static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *
spin_lock(&vmax301_spin);
vmax301_page(map, to);
memcpy_toio(map->map_priv_2 + to, from, thislen);
- spin_unlock(&vmax301_spin);
+ spin_unlock(&vmax301_spin);
to += thislen;
from += thislen;
len -= thislen;
@@ -137,7 +137,7 @@ static struct mtd_info *vmax_mtd[2] = {NULL, NULL};
static void __exit cleanup_vmax301(void)
{
int i;
-
+
for (i=0; i<2; i++) {
if (vmax_mtd[i]) {
del_mtd_device(vmax_mtd[i]);
@@ -161,13 +161,13 @@ int __init init_vmax301(void)
return -EIO;
}
/* Put the address in the map's private data area.
- We store the actual MTD IO address rather than the
+ We store the actual MTD IO address rather than the
address of the first half, because it's used more
- often.
+ often.
*/
vmax_map[0].map_priv_2 = iomapadr + WINDOW_START;
vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START);
-
+
for (i=0; i<2; i++) {
vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]);
if (!vmax_mtd[i])
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index d6137b1b5670..5c17bca3a37e 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -1,12 +1,12 @@
/*
- * $Id: walnut.c,v 1.2 2004/12/10 12:07:42 holindho Exp $
- *
+ * $Id: walnut.c,v 1.3 2005/11/07 11:14:29 gleixner Exp $
+ *
* Mapping for Walnut flash
* (used ebony.c as a "framework")
- *
+ *
* Heikki Lindholm <holindho@infradead.org>
- *
- *
+ *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -48,7 +48,7 @@ static struct mtd_partition walnut_partitions[] = {
.name = "OpenBIOS",
.offset = 0x0,
.size = WALNUT_FLASH_SIZE,
- /*.mask_flags = MTD_WRITEABLE, */ /* force read-only */
+ /*.mask_flags = MTD_WRITEABLE, */ /* force read-only */
}
};
@@ -72,11 +72,11 @@ int __init init_walnut(void)
printk("The on-board flash is disabled (U79 sw 5)!");
return -EIO;
}
- if (WALNUT_FLASH_SRAM_SEL(fpga_brds1))
+ if (WALNUT_FLASH_SRAM_SEL(fpga_brds1))
flash_base = WALNUT_FLASH_LOW;
else
flash_base = WALNUT_FLASH_HIGH;
-
+
walnut_map.phys = flash_base;
walnut_map.virt =
(void __iomem *)ioremap(flash_base, walnut_map.size);
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index 82b887b05707..60c197ec455b 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -1,5 +1,5 @@
/*
- * $Id: wr_sbc82xx_flash.c,v 1.7 2004/11/04 13:24:15 gleixner Exp $
+ * $Id: wr_sbc82xx_flash.c,v 1.8 2005/11/07 11:14:29 gleixner Exp $
*
* Map for flash chips on Wind River PowerQUICC II SBC82xx board.
*
@@ -163,10 +163,10 @@ static void __exit cleanup_sbc82xx_flash(void)
del_mtd_partitions(sbcmtd[i]);
else
del_mtd_device(sbcmtd[i]);
-
+
kfree(sbcmtd_parts[i]);
map_destroy(sbcmtd[i]);
-
+
iounmap((void *)sbc82xx_flash_map[i].virt);
sbc82xx_flash_map[i].virt = 0;
}