summaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/ubi')
-rw-r--r--drivers/mtd/ubi/Kconfig9
-rw-r--r--drivers/mtd/ubi/build.c37
-rw-r--r--drivers/mtd/ubi/debug.h2
-rw-r--r--drivers/mtd/ubi/gluebi.c5
-rw-r--r--drivers/mtd/ubi/io.c4
-rw-r--r--drivers/mtd/ubi/scan.c41
-rw-r--r--drivers/mtd/ubi/scan.h2
-rw-r--r--drivers/mtd/ubi/ubi-media.h372
-rw-r--r--drivers/mtd/ubi/ubi.h3
9 files changed, 416 insertions, 59 deletions
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index b9daf159a4a7..3f063108e95f 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -24,8 +24,13 @@ config MTD_UBI_WL_THRESHOLD
erase counter value and the lowest erase counter value of eraseblocks
of UBI devices. When this threshold is exceeded, UBI starts performing
wear leveling by means of moving data from eraseblock with low erase
- counter to eraseblocks with high erase counter. Leave the default
- value if unsure.
+ counter to eraseblocks with high erase counter.
+
+ The default value should be OK for SLC NAND flashes, NOR flashes and
+ other flashes which have eraseblock life-cycle 100000 or more.
+ However, in case of MLC NAND flashes which typically have eraseblock
+ life-cycle less then 10000, the threshold should be lessened (e.g.,
+ to 128 or 256, although it does not have to be power of 2).
config MTD_UBI_BEB_RESERVE
int "Percentage of reserved eraseblocks for bad eraseblocks handling"
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 275960462970..e8578ca422ff 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -606,8 +606,16 @@ static int io_init(struct ubi_device *ubi)
ubi->ro_mode = 1;
}
- dbg_msg("leb_size %d", ubi->leb_size);
- dbg_msg("ro_mode %d", ubi->ro_mode);
+ ubi_msg("physical eraseblock size: %d bytes (%d KiB)",
+ ubi->peb_size, ubi->peb_size >> 10);
+ ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size);
+ ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size);
+ if (ubi->hdrs_min_io_size != ubi->min_io_size)
+ ubi_msg("sub-page size: %d",
+ ubi->hdrs_min_io_size);
+ ubi_msg("VID header offset: %d (aligned %d)",
+ ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
+ ubi_msg("data offset: %d", ubi->leb_start);
/*
* Note, ideally, we have to initialize ubi->bad_peb_count here. But
@@ -804,15 +812,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);
ubi_msg("MTD device name: \"%s\"", mtd->name);
ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20);
- ubi_msg("physical eraseblock size: %d bytes (%d KiB)",
- ubi->peb_size, ubi->peb_size >> 10);
- ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size);
ubi_msg("number of good PEBs: %d", ubi->good_peb_count);
ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count);
- ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size);
- ubi_msg("VID header offset: %d (aligned %d)",
- ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
- ubi_msg("data offset: %d", ubi->leb_start);
ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots);
ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD);
ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
@@ -950,8 +951,7 @@ static int __init ubi_init(void)
BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64);
if (mtd_devs > UBI_MAX_DEVICES) {
- printk(KERN_ERR "UBI error: too many MTD devices, "
- "maximum is %d\n", UBI_MAX_DEVICES);
+ ubi_err("too many MTD devices, maximum is %d", UBI_MAX_DEVICES);
return -EINVAL;
}
@@ -959,25 +959,25 @@ static int __init ubi_init(void)
ubi_class = class_create(THIS_MODULE, UBI_NAME_STR);
if (IS_ERR(ubi_class)) {
err = PTR_ERR(ubi_class);
- printk(KERN_ERR "UBI error: cannot create UBI class\n");
+ ubi_err("cannot create UBI class");
goto out;
}
err = class_create_file(ubi_class, &ubi_version);
if (err) {
- printk(KERN_ERR "UBI error: cannot create sysfs file\n");
+ ubi_err("cannot create sysfs file");
goto out_class;
}
err = misc_register(&ubi_ctrl_cdev);
if (err) {
- printk(KERN_ERR "UBI error: cannot register device\n");
+ ubi_err("cannot register device");
goto out_version;
}
ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
- sizeof(struct ubi_wl_entry),
- 0, 0, NULL);
+ sizeof(struct ubi_wl_entry),
+ 0, 0, NULL);
if (!ubi_wl_entry_slab)
goto out_dev_unreg;
@@ -1000,8 +1000,7 @@ static int __init ubi_init(void)
mutex_unlock(&ubi_devices_mutex);
if (err < 0) {
put_mtd_device(mtd);
- printk(KERN_ERR "UBI error: cannot attach mtd%d\n",
- mtd->index);
+ ubi_err("cannot attach mtd%d", mtd->index);
goto out_detach;
}
}
@@ -1023,7 +1022,7 @@ out_version:
out_class:
class_destroy(ubi_class);
out:
- printk(KERN_ERR "UBI error: cannot initialize UBI, error %d\n", err);
+ ubi_err("UBI error: cannot initialize UBI, error %d", err);
return err;
}
module_init(ubi_init);
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 8ac7d87dc85b..8ea99d8c9e1f 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -99,8 +99,10 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
/* Initialization and build messages */
#define dbg_bld(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define UBI_IO_DEBUG 1
#else
#define dbg_bld(fmt, ...) ({})
+#define UBI_IO_DEBUG 0
#endif
#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index d397219238d3..e909b390069a 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -291,11 +291,12 @@ int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
/*
* In case of dynamic volume, MTD device size is just volume size. In
* case of a static volume the size is equivalent to the amount of data
- * bytes, which is zero at this moment and will be changed after volume
- * update.
+ * bytes.
*/
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
mtd->size = vol->usable_leb_size * vol->reserved_pebs;
+ else
+ mtd->size = vol->used_bytes;
if (add_mtd_device(mtd)) {
ubi_err("cannot not add MTD device\n");
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index db3efdef2433..4ac11df7b048 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -631,6 +631,8 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
dbg_io("read EC header from PEB %d", pnum);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+ if (UBI_IO_DEBUG)
+ verbose = 1;
err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
if (err) {
@@ -904,6 +906,8 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
dbg_io("read VID header from PEB %d", pnum);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+ if (UBI_IO_DEBUG)
+ verbose = 1;
p = (char *)vid_hdr - ubi->vid_hdr_shift;
err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 05aa3e7daba1..96d410e106ab 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -42,6 +42,7 @@
#include <linux/err.h>
#include <linux/crc32.h>
+#include <asm/div64.h>
#include "ubi.h"
#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -92,27 +93,6 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
}
/**
- * commit_to_mean_value - commit intermediate results to the final mean erase
- * counter value.
- * @si: scanning information
- *
- * This is a helper function which calculates partial mean erase counter mean
- * value and adds it to the resulting mean value. As we can work only in
- * integer arithmetic and we want to calculate the mean value of erase counter
- * accurately, we first sum erase counter values in @si->ec_sum variable and
- * count these components in @si->ec_count. If this temporary @si->ec_sum is
- * going to overflow, we calculate the partial mean value
- * (@si->ec_sum/@si->ec_count) and add it to @si->mean_ec.
- */
-static void commit_to_mean_value(struct ubi_scan_info *si)
-{
- si->ec_sum /= si->ec_count;
- if (si->ec_sum % si->ec_count >= si->ec_count / 2)
- si->mean_ec += 1;
- si->mean_ec += si->ec_sum;
-}
-
-/**
* validate_vid_hdr - check that volume identifier header is correct and
* consistent.
* @vid_hdr: the volume identifier header to check
@@ -901,15 +881,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum
adjust_mean_ec:
if (!ec_corr) {
- if (si->ec_sum + ec < ec) {
- commit_to_mean_value(si);
- si->ec_sum = 0;
- si->ec_count = 0;
- } else {
- si->ec_sum += ec;
- si->ec_count += 1;
- }
-
+ si->ec_sum += ec;
+ si->ec_count += 1;
if (ec > si->max_ec)
si->max_ec = ec;
if (ec < si->min_ec)
@@ -965,9 +938,11 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
dbg_msg("scanning is finished");
- /* Finish mean erase counter calculations */
- if (si->ec_count)
- commit_to_mean_value(si);
+ /* Calculate mean erase counter */
+ if (si->ec_count) {
+ do_div(si->ec_sum, si->ec_count);
+ si->mean_ec = si->ec_sum;
+ }
if (si->is_empty)
ubi_msg("empty MTD device detected");
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 46d444af471a..966b9b682a42 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -124,7 +124,7 @@ struct ubi_scan_info {
int max_ec;
unsigned long long max_sqnum;
int mean_ec;
- int ec_sum;
+ uint64_t ec_sum;
int ec_count;
};
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
new file mode 100644
index 000000000000..c3185d9fd048
--- /dev/null
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Authors: Artem Bityutskiy (Битюцкий Артём)
+ * Thomas Gleixner
+ * Frank Haverkamp
+ * Oliver Lohmann
+ * Andreas Arnez
+ */
+
+/*
+ * This file defines the layout of UBI headers and all the other UBI on-flash
+ * data structures.
+ */
+
+#ifndef __UBI_MEDIA_H__
+#define __UBI_MEDIA_H__
+
+#include <asm/byteorder.h>
+
+/* The version of UBI images supported by this implementation */
+#define UBI_VERSION 1
+
+/* The highest erase counter value supported by this implementation */
+#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF
+
+/* The initial CRC32 value used when calculating CRC checksums */
+#define UBI_CRC32_INIT 0xFFFFFFFFU
+
+/* Erase counter header magic number (ASCII "UBI#") */
+#define UBI_EC_HDR_MAGIC 0x55424923
+/* Volume identifier header magic number (ASCII "UBI!") */
+#define UBI_VID_HDR_MAGIC 0x55424921
+
+/*
+ * Volume type constants used in the volume identifier header.
+ *
+ * @UBI_VID_DYNAMIC: dynamic volume
+ * @UBI_VID_STATIC: static volume
+ */
+enum {
+ UBI_VID_DYNAMIC = 1,
+ UBI_VID_STATIC = 2
+};
+
+/*
+ * Volume flags used in the volume table record.
+ *
+ * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
+ *
+ * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
+ * table. UBI automatically re-sizes the volume which has this flag and makes
+ * the volume to be of largest possible size. This means that if after the
+ * initialization UBI finds out that there are available physical eraseblocks
+ * present on the device, it automatically appends all of them to the volume
+ * (the physical eraseblocks reserved for bad eraseblocks handling and other
+ * reserved physical eraseblocks are not taken). So, if there is a volume with
+ * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
+ * eraseblocks will be zero after UBI is loaded, because all of them will be
+ * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
+ * after the volume had been initialized.
+ *
+ * The auto-resize feature is useful for device production purposes. For
+ * example, different NAND flash chips may have different amount of initial bad
+ * eraseblocks, depending of particular chip instance. Manufacturers of NAND
+ * chips usually guarantee that the amount of initial bad eraseblocks does not
+ * exceed certain percent, e.g. 2%. When one creates an UBI image which will be
+ * flashed to the end devices in production, he does not know the exact amount
+ * of good physical eraseblocks the NAND chip on the device will have, but this
+ * number is required to calculate the volume sized and put them to the volume
+ * table of the UBI image. In this case, one of the volumes (e.g., the one
+ * which will store the root file system) is marked as "auto-resizable", and
+ * UBI will adjust its size on the first boot if needed.
+ *
+ * Note, first UBI reserves some amount of physical eraseblocks for bad
+ * eraseblock handling, and then re-sizes the volume, not vice-versa. This
+ * means that the pool of reserved physical eraseblocks will always be present.
+ */
+enum {
+ UBI_VTBL_AUTORESIZE_FLG = 0x01,
+};
+
+/*
+ * Compatibility constants used by internal volumes.
+ *
+ * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
+ * to the flash
+ * @UBI_COMPAT_RO: attach this device in read-only mode
+ * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
+ * physical eraseblocks, don't allow the wear-leveling unit to move them
+ * @UBI_COMPAT_REJECT: reject this UBI image
+ */
+enum {
+ UBI_COMPAT_DELETE = 1,
+ UBI_COMPAT_RO = 2,
+ UBI_COMPAT_PRESERVE = 4,
+ UBI_COMPAT_REJECT = 5
+};
+
+/* Sizes of UBI headers */
+#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr)
+#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)
+
+/* Sizes of UBI headers without the ending CRC */
+#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32))
+#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32))
+
+/**
+ * struct ubi_ec_hdr - UBI erase counter header.
+ * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
+ * @version: version of UBI implementation which is supposed to accept this
+ * UBI image
+ * @padding1: reserved for future, zeroes
+ * @ec: the erase counter
+ * @vid_hdr_offset: where the VID header starts
+ * @data_offset: where the user data start
+ * @padding2: reserved for future, zeroes
+ * @hdr_crc: erase counter header CRC checksum
+ *
+ * The erase counter header takes 64 bytes and has a plenty of unused space for
+ * future usage. The unused fields are zeroed. The @version field is used to
+ * indicate the version of UBI implementation which is supposed to be able to
+ * work with this UBI image. If @version is greater then the current UBI
+ * version, the image is rejected. This may be useful in future if something
+ * is changed radically. This field is duplicated in the volume identifier
+ * header.
+ *
+ * The @vid_hdr_offset and @data_offset fields contain the offset of the the
+ * volume identifier header and user data, relative to the beginning of the
+ * physical eraseblock. These values have to be the same for all physical
+ * eraseblocks.
+ */
+struct ubi_ec_hdr {
+ __be32 magic;
+ __u8 version;
+ __u8 padding1[3];
+ __be64 ec; /* Warning: the current limit is 31-bit anyway! */
+ __be32 vid_hdr_offset;
+ __be32 data_offset;
+ __u8 padding2[36];
+ __be32 hdr_crc;
+} __attribute__ ((packed));
+
+/**
+ * struct ubi_vid_hdr - on-flash UBI volume identifier header.
+ * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
+ * @version: UBI implementation version which is supposed to accept this UBI
+ * image (%UBI_VERSION)
+ * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
+ * @copy_flag: if this logical eraseblock was copied from another physical
+ * eraseblock (for wear-leveling reasons)
+ * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
+ * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
+ * @vol_id: ID of this volume
+ * @lnum: logical eraseblock number
+ * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
+ * removed, kept only for not breaking older UBI users)
+ * @data_size: how many bytes of data this logical eraseblock contains
+ * @used_ebs: total number of used logical eraseblocks in this volume
+ * @data_pad: how many bytes at the end of this physical eraseblock are not
+ * used
+ * @data_crc: CRC checksum of the data stored in this logical eraseblock
+ * @padding1: reserved for future, zeroes
+ * @sqnum: sequence number
+ * @padding2: reserved for future, zeroes
+ * @hdr_crc: volume identifier header CRC checksum
+ *
+ * The @sqnum is the value of the global sequence counter at the time when this
+ * VID header was created. The global sequence counter is incremented each time
+ * UBI writes a new VID header to the flash, i.e. when it maps a logical
+ * eraseblock to a new physical eraseblock. The global sequence counter is an
+ * unsigned 64-bit integer and we assume it never overflows. The @sqnum
+ * (sequence number) is used to distinguish between older and newer versions of
+ * logical eraseblocks.
+ *
+ * There are 2 situations when there may be more then one physical eraseblock
+ * corresponding to the same logical eraseblock, i.e., having the same @vol_id
+ * and @lnum values in the volume identifier header. Suppose we have a logical
+ * eraseblock L and it is mapped to the physical eraseblock P.
+ *
+ * 1. Because UBI may erase physical eraseblocks asynchronously, the following
+ * situation is possible: L is asynchronously erased, so P is scheduled for
+ * erasure, then L is written to,i.e. mapped to another physical eraseblock P1,
+ * so P1 is written to, then an unclean reboot happens. Result - there are 2
+ * physical eraseblocks P and P1 corresponding to the same logical eraseblock
+ * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the
+ * flash.
+ *
+ * 2. From time to time UBI moves logical eraseblocks to other physical
+ * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P
+ * to P1, and an unclean reboot happens before P is physically erased, there
+ * are two physical eraseblocks P and P1 corresponding to L and UBI has to
+ * select one of them when the flash is attached. The @sqnum field says which
+ * PEB is the original (obviously P will have lower @sqnum) and the copy. But
+ * it is not enough to select the physical eraseblock with the higher sequence
+ * number, because the unclean reboot could have happen in the middle of the
+ * copying process, so the data in P is corrupted. It is also not enough to
+ * just select the physical eraseblock with lower sequence number, because the
+ * data there may be old (consider a case if more data was added to P1 after
+ * the copying). Moreover, the unclean reboot may happen when the erasure of P
+ * was just started, so it result in unstable P, which is "mostly" OK, but
+ * still has unstable bits.
+ *
+ * UBI uses the @copy_flag field to indicate that this logical eraseblock is a
+ * copy. UBI also calculates data CRC when the data is moved and stores it at
+ * the @data_crc field of the copy (P1). So when UBI needs to pick one physical
+ * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
+ * examined. If it is cleared, the situation* is simple and the newer one is
+ * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
+ * checksum is correct, this physical eraseblock is selected (P1). Otherwise
+ * the older one (P) is selected.
+ *
+ * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
+ * in the past. But it is not used anymore and we keep it in order to be able
+ * to deal with old UBI images. It will be removed at some point.
+ *
+ * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
+ * Internal volumes are not seen from outside and are used for various internal
+ * UBI purposes. In this implementation there is only one internal volume - the
+ * layout volume. Internal volumes are the main mechanism of UBI extensions.
+ * For example, in future one may introduce a journal internal volume. Internal
+ * volumes have their own reserved range of IDs.
+ *
+ * The @compat field is only used for internal volumes and contains the "degree
+ * of their compatibility". It is always zero for user volumes. This field
+ * provides a mechanism to introduce UBI extensions and to be still compatible
+ * with older UBI binaries. For example, if someone introduced a journal in
+ * future, he would probably use %UBI_COMPAT_DELETE compatibility for the
+ * journal volume. And in this case, older UBI binaries, which know nothing
+ * about the journal volume, would just delete this volume and work perfectly
+ * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image
+ * - it just ignores the Ext3fs journal.
+ *
+ * The @data_crc field contains the CRC checksum of the contents of the logical
+ * eraseblock if this is a static volume. In case of dynamic volumes, it does
+ * not contain the CRC checksum as a rule. The only exception is when the
+ * data of the physical eraseblock was moved by the wear-leveling unit, then
+ * the wear-leveling unit calculates the data CRC and stores it in the
+ * @data_crc field. And of course, the @copy_flag is %in this case.
+ *
+ * The @data_size field is used only for static volumes because UBI has to know
+ * how many bytes of data are stored in this eraseblock. For dynamic volumes,
+ * this field usually contains zero. The only exception is when the data of the
+ * physical eraseblock was moved to another physical eraseblock for
+ * wear-leveling reasons. In this case, UBI calculates CRC checksum of the
+ * contents and uses both @data_crc and @data_size fields. In this case, the
+ * @data_size field contains data size.
+ *
+ * The @used_ebs field is used only for static volumes and indicates how many
+ * eraseblocks the data of the volume takes. For dynamic volumes this field is
+ * not used and always contains zero.
+ *
+ * The @data_pad is calculated when volumes are created using the alignment
+ * parameter. So, effectively, the @data_pad field reduces the size of logical
+ * eraseblocks of this volume. This is very handy when one uses block-oriented
+ * software (say, cramfs) on top of the UBI volume.
+ */
+struct ubi_vid_hdr {
+ __be32 magic;
+ __u8 version;
+ __u8 vol_type;
+ __u8 copy_flag;
+ __u8 compat;
+ __be32 vol_id;
+ __be32 lnum;
+ __be32 leb_ver; /* obsolete, to be removed, don't use */
+ __be32 data_size;
+ __be32 used_ebs;
+ __be32 data_pad;
+ __be32 data_crc;
+ __u8 padding1[4];
+ __be64 sqnum;
+ __u8 padding2[12];
+ __be32 hdr_crc;
+} __attribute__ ((packed));
+
+/* Internal UBI volumes count */
+#define UBI_INT_VOL_COUNT 1
+
+/*
+ * Starting ID of internal volumes. There is reserved room for 4096 internal
+ * volumes.
+ */
+#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
+
+/* The layout volume contains the volume table */
+
+#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC
+#define UBI_LAYOUT_VOLUME_ALIGN 1
+#define UBI_LAYOUT_VOLUME_EBS 2
+#define UBI_LAYOUT_VOLUME_NAME "layout volume"
+#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
+
+/* The maximum number of volumes per one UBI device */
+#define UBI_MAX_VOLUMES 128
+
+/* The maximum volume name length */
+#define UBI_VOL_NAME_MAX 127
+
+/* Size of the volume table record */
+#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)
+
+/* Size of the volume table record without the ending CRC */
+#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32))
+
+/**
+ * struct ubi_vtbl_record - a record in the volume table.
+ * @reserved_pebs: how many physical eraseblocks are reserved for this volume
+ * @alignment: volume alignment
+ * @data_pad: how many bytes are unused at the end of the each physical
+ * eraseblock to satisfy the requested alignment
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @upd_marker: if volume update was started but not finished
+ * @name_len: volume name length
+ * @name: the volume name
+ * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
+ * @padding: reserved, zeroes
+ * @crc: a CRC32 checksum of the record
+ *
+ * The volume table records are stored in the volume table, which is stored in
+ * the layout volume. The layout volume consists of 2 logical eraseblock, each
+ * of which contains a copy of the volume table (i.e., the volume table is
+ * duplicated). The volume table is an array of &struct ubi_vtbl_record
+ * objects indexed by the volume ID.
+ *
+ * If the size of the logical eraseblock is large enough to fit
+ * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES
+ * records. Otherwise, it contains as many records as it can fit (i.e., size of
+ * logical eraseblock divided by sizeof(struct ubi_vtbl_record)).
+ *
+ * The @upd_marker flag is used to implement volume update. It is set to %1
+ * before update and set to %0 after the update. So if the update operation was
+ * interrupted, UBI knows that the volume is corrupted.
+ *
+ * The @alignment field is specified when the volume is created and cannot be
+ * later changed. It may be useful, for example, when a block-oriented file
+ * system works on top of UBI. The @data_pad field is calculated using the
+ * logical eraseblock size and @alignment. The alignment must be multiple to the
+ * minimal flash I/O unit. If @alignment is 1, all the available space of
+ * the physical eraseblocks is used.
+ *
+ * Empty records contain all zeroes and the CRC checksum of those zeroes.
+ */
+struct ubi_vtbl_record {
+ __be32 reserved_pebs;
+ __be32 alignment;
+ __be32 data_pad;
+ __u8 vol_type;
+ __u8 upd_marker;
+ __be16 name_len;
+ __u8 name[UBI_VOL_NAME_MAX+1];
+ __u8 flags;
+ __u8 padding[23];
+ __be32 crc;
+} __attribute__ ((packed));
+
+#endif /* !__UBI_MEDIA_H__ */
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 8f095cb87108..67dcbd11c15c 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -37,10 +37,9 @@
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/mtd/mtd.h>
-
-#include <mtd/ubi-header.h>
#include <linux/mtd/ubi.h>
+#include "ubi-media.h"
#include "scan.h"
#include "debug.h"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 02:38:16 +0000