diff options
Diffstat (limited to 'drivers/net/ieee802154/at86rf230.c')
-rw-r--r-- | drivers/net/ieee802154/at86rf230.c | 376 |
1 files changed, 141 insertions, 235 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 67d00fbc2e0e..2f25a5ed8247 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -35,6 +35,8 @@ #include <net/mac802154.h> #include <net/cfg802154.h> +#include "at86rf230.h" + struct at86rf230_local; /* at86rf2xx chip depend data. * All timings are in us. @@ -50,7 +52,7 @@ struct at86rf2xx_chip_data { int rssi_base_val; int (*set_channel)(struct at86rf230_local *, u8, u8); - int (*get_desense_steps)(struct at86rf230_local *, s32); + int (*set_txpower)(struct at86rf230_local *, s32); }; #define AT86RF2XX_MAX_BUF (127 + 3) @@ -102,200 +104,6 @@ struct at86rf230_local { struct at86rf230_state_change tx; }; -#define RG_TRX_STATUS (0x01) -#define SR_TRX_STATUS 0x01, 0x1f, 0 -#define SR_RESERVED_01_3 0x01, 0x20, 5 -#define SR_CCA_STATUS 0x01, 0x40, 6 -#define SR_CCA_DONE 0x01, 0x80, 7 -#define RG_TRX_STATE (0x02) -#define SR_TRX_CMD 0x02, 0x1f, 0 -#define SR_TRAC_STATUS 0x02, 0xe0, 5 -#define RG_TRX_CTRL_0 (0x03) -#define SR_CLKM_CTRL 0x03, 0x07, 0 -#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 -#define SR_PAD_IO_CLKM 0x03, 0x30, 4 -#define SR_PAD_IO 0x03, 0xc0, 6 -#define RG_TRX_CTRL_1 (0x04) -#define SR_IRQ_POLARITY 0x04, 0x01, 0 -#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 -#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 -#define SR_RX_BL_CTRL 0x04, 0x10, 4 -#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 -#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 -#define SR_PA_EXT_EN 0x04, 0x80, 7 -#define RG_PHY_TX_PWR (0x05) -#define SR_TX_PWR 0x05, 0x0f, 0 -#define SR_PA_LT 0x05, 0x30, 4 -#define SR_PA_BUF_LT 0x05, 0xc0, 6 -#define RG_PHY_RSSI (0x06) -#define SR_RSSI 0x06, 0x1f, 0 -#define SR_RND_VALUE 0x06, 0x60, 5 -#define SR_RX_CRC_VALID 0x06, 0x80, 7 -#define RG_PHY_ED_LEVEL (0x07) -#define SR_ED_LEVEL 0x07, 0xff, 0 -#define RG_PHY_CC_CCA (0x08) -#define SR_CHANNEL 0x08, 0x1f, 0 -#define SR_CCA_MODE 0x08, 0x60, 5 -#define SR_CCA_REQUEST 0x08, 0x80, 7 -#define RG_CCA_THRES (0x09) -#define SR_CCA_ED_THRES 0x09, 0x0f, 0 -#define SR_RESERVED_09_1 0x09, 0xf0, 4 -#define RG_RX_CTRL (0x0a) -#define SR_PDT_THRES 0x0a, 0x0f, 0 -#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 -#define RG_SFD_VALUE (0x0b) -#define SR_SFD_VALUE 0x0b, 0xff, 0 -#define RG_TRX_CTRL_2 (0x0c) -#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 -#define SR_SUB_MODE 0x0c, 0x04, 2 -#define SR_BPSK_QPSK 0x0c, 0x08, 3 -#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 -#define SR_RESERVED_0c_5 0x0c, 0x60, 5 -#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 -#define RG_ANT_DIV (0x0d) -#define SR_ANT_CTRL 0x0d, 0x03, 0 -#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 -#define SR_ANT_DIV_EN 0x0d, 0x08, 3 -#define SR_RESERVED_0d_2 0x0d, 0x70, 4 -#define SR_ANT_SEL 0x0d, 0x80, 7 -#define RG_IRQ_MASK (0x0e) -#define SR_IRQ_MASK 0x0e, 0xff, 0 -#define RG_IRQ_STATUS (0x0f) -#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 -#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 -#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 -#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 -#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 -#define SR_IRQ_5_AMI 0x0f, 0x20, 5 -#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 -#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 -#define RG_VREG_CTRL (0x10) -#define SR_RESERVED_10_6 0x10, 0x03, 0 -#define SR_DVDD_OK 0x10, 0x04, 2 -#define SR_DVREG_EXT 0x10, 0x08, 3 -#define SR_RESERVED_10_3 0x10, 0x30, 4 -#define SR_AVDD_OK 0x10, 0x40, 6 -#define SR_AVREG_EXT 0x10, 0x80, 7 -#define RG_BATMON (0x11) -#define SR_BATMON_VTH 0x11, 0x0f, 0 -#define SR_BATMON_HR 0x11, 0x10, 4 -#define SR_BATMON_OK 0x11, 0x20, 5 -#define SR_RESERVED_11_1 0x11, 0xc0, 6 -#define RG_XOSC_CTRL (0x12) -#define SR_XTAL_TRIM 0x12, 0x0f, 0 -#define SR_XTAL_MODE 0x12, 0xf0, 4 -#define RG_RX_SYN (0x15) -#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 -#define SR_RESERVED_15_2 0x15, 0x70, 4 -#define SR_RX_PDT_DIS 0x15, 0x80, 7 -#define RG_XAH_CTRL_1 (0x17) -#define SR_RESERVED_17_8 0x17, 0x01, 0 -#define SR_AACK_PROM_MODE 0x17, 0x02, 1 -#define SR_AACK_ACK_TIME 0x17, 0x04, 2 -#define SR_RESERVED_17_5 0x17, 0x08, 3 -#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 -#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 -#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 -#define SR_RESERVED_17_1 0x17, 0x80, 7 -#define RG_FTN_CTRL (0x18) -#define SR_RESERVED_18_2 0x18, 0x7f, 0 -#define SR_FTN_START 0x18, 0x80, 7 -#define RG_PLL_CF (0x1a) -#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 -#define SR_PLL_CF_START 0x1a, 0x80, 7 -#define RG_PLL_DCU (0x1b) -#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 -#define SR_RESERVED_1b_2 0x1b, 0x40, 6 -#define SR_PLL_DCU_START 0x1b, 0x80, 7 -#define RG_PART_NUM (0x1c) -#define SR_PART_NUM 0x1c, 0xff, 0 -#define RG_VERSION_NUM (0x1d) -#define SR_VERSION_NUM 0x1d, 0xff, 0 -#define RG_MAN_ID_0 (0x1e) -#define SR_MAN_ID_0 0x1e, 0xff, 0 -#define RG_MAN_ID_1 (0x1f) -#define SR_MAN_ID_1 0x1f, 0xff, 0 -#define RG_SHORT_ADDR_0 (0x20) -#define SR_SHORT_ADDR_0 0x20, 0xff, 0 -#define RG_SHORT_ADDR_1 (0x21) -#define SR_SHORT_ADDR_1 0x21, 0xff, 0 -#define RG_PAN_ID_0 (0x22) -#define SR_PAN_ID_0 0x22, 0xff, 0 -#define RG_PAN_ID_1 (0x23) -#define SR_PAN_ID_1 0x23, 0xff, 0 -#define RG_IEEE_ADDR_0 (0x24) -#define SR_IEEE_ADDR_0 0x24, 0xff, 0 -#define RG_IEEE_ADDR_1 (0x25) -#define SR_IEEE_ADDR_1 0x25, 0xff, 0 -#define RG_IEEE_ADDR_2 (0x26) -#define SR_IEEE_ADDR_2 0x26, 0xff, 0 -#define RG_IEEE_ADDR_3 (0x27) -#define SR_IEEE_ADDR_3 0x27, 0xff, 0 -#define RG_IEEE_ADDR_4 (0x28) -#define SR_IEEE_ADDR_4 0x28, 0xff, 0 -#define RG_IEEE_ADDR_5 (0x29) -#define SR_IEEE_ADDR_5 0x29, 0xff, 0 -#define RG_IEEE_ADDR_6 (0x2a) -#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 -#define RG_IEEE_ADDR_7 (0x2b) -#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 -#define RG_XAH_CTRL_0 (0x2c) -#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 -#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 -#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 -#define RG_CSMA_SEED_0 (0x2d) -#define SR_CSMA_SEED_0 0x2d, 0xff, 0 -#define RG_CSMA_SEED_1 (0x2e) -#define SR_CSMA_SEED_1 0x2e, 0x07, 0 -#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 -#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 -#define SR_AACK_SET_PD 0x2e, 0x20, 5 -#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 -#define RG_CSMA_BE (0x2f) -#define SR_MIN_BE 0x2f, 0x0f, 0 -#define SR_MAX_BE 0x2f, 0xf0, 4 - -#define CMD_REG 0x80 -#define CMD_REG_MASK 0x3f -#define CMD_WRITE 0x40 -#define CMD_FB 0x20 - -#define IRQ_BAT_LOW (1 << 7) -#define IRQ_TRX_UR (1 << 6) -#define IRQ_AMI (1 << 5) -#define IRQ_CCA_ED (1 << 4) -#define IRQ_TRX_END (1 << 3) -#define IRQ_RX_START (1 << 2) -#define IRQ_PLL_UNL (1 << 1) -#define IRQ_PLL_LOCK (1 << 0) - -#define IRQ_ACTIVE_HIGH 0 -#define IRQ_ACTIVE_LOW 1 - -#define STATE_P_ON 0x00 /* BUSY */ -#define STATE_BUSY_RX 0x01 -#define STATE_BUSY_TX 0x02 -#define STATE_FORCE_TRX_OFF 0x03 -#define STATE_FORCE_TX_ON 0x04 /* IDLE */ -/* 0x05 */ /* INVALID_PARAMETER */ -#define STATE_RX_ON 0x06 -/* 0x07 */ /* SUCCESS */ -#define STATE_TRX_OFF 0x08 -#define STATE_TX_ON 0x09 -/* 0x0a - 0x0e */ /* 0x0a - UNSUPPORTED_ATTRIBUTE */ -#define STATE_SLEEP 0x0F -#define STATE_PREP_DEEP_SLEEP 0x10 -#define STATE_BUSY_RX_AACK 0x11 -#define STATE_BUSY_TX_ARET 0x12 -#define STATE_RX_AACK_ON 0x16 -#define STATE_TX_ARET_ON 0x19 -#define STATE_RX_ON_NOCLK 0x1C -#define STATE_RX_AACK_ON_NOCLK 0x1D -#define STATE_BUSY_RX_AACK_NOCLK 0x1E -#define STATE_TRANSITION_IN_PROGRESS 0x1F - -#define TRX_STATE_MASK (0x1F) - #define AT86RF2XX_NUMREGS 0x3F static void @@ -1010,7 +818,7 @@ at86rf230_xmit_start(void *context) if (lp->is_tx_from_off) { lp->is_tx_from_off = false; at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, - at86rf230_xmit_tx_on, + at86rf230_write_frame, false); } else { at86rf230_async_state_change(lp, ctx, STATE_TX_ON, @@ -1076,6 +884,50 @@ at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) return at86rf230_write_subreg(lp, SR_CHANNEL, channel); } +#define AT86RF2XX_MAX_ED_LEVELS 0xF +static const s32 at86rf23x_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = { + -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300, + -7100, -6900, -6700, -6500, -6300, -6100, +}; + +static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = { + -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, + -8000, -7800, -7600, -7400, -7200, -7000, +}; + +static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = { + -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, + -7800, -7600, -7400, -7200, -7000, -6800, +}; + +static inline int +at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val) +{ + unsigned int cca_ed_thres; + int rc; + + rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres); + if (rc < 0) + return rc; + + switch (rssi_base_val) { + case -98: + lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98; + lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98); + lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres]; + break; + case -100: + lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; + lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); + lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres]; + break; + default: + WARN_ON(1); + } + + return 0; +} + static int at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) { @@ -1098,6 +950,10 @@ at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) if (rc < 0) return rc; + rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val); + if (rc < 0) + return rc; + /* This sets the symbol_duration according frequency on the 212. * TODO move this handling while set channel and page in cfg802154. * We can do that, this timings are according 802.15.4 standard. @@ -1193,23 +1049,56 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, return 0; } +#define AT86RF23X_MAX_TX_POWERS 0xF +static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = { + 400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600, + -800, -1200, -1700, +}; + +static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = { + 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700, + -900, -1200, -1700, +}; + +#define AT86RF212_MAX_TX_POWERS 0x1F +static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = { + 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700, + -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700, + -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600, +}; + +static int +at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm) +{ + u32 i; + + for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { + if (lp->hw->phy->supported.tx_powers[i] == mbm) + return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i); + } + + return -EINVAL; +} + static int -at86rf230_set_txpower(struct ieee802154_hw *hw, s8 db) +at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm) { - struct at86rf230_local *lp = hw->priv; + u32 i; - /* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five - * bits decrease power in 1dB steps. 0x60 represents extra PA gain of - * 0dB. - * thus, supported values for db range from -26 to 5, for 31dB of - * reduction to 0dB of reduction. - */ - if (db > 5 || db < -26) - return -EINVAL; + for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) { + if (lp->hw->phy->supported.tx_powers[i] == mbm) + return at86rf230_write_subreg(lp, SR_TX_PWR_212, i); + } - db = -(db - 5); + return -EINVAL; +} + +static int +at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm) +{ + struct at86rf230_local *lp = hw->priv; - return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db); + return lp->data->set_txpower(lp, mbm); } static int @@ -1254,28 +1143,19 @@ at86rf230_set_cca_mode(struct ieee802154_hw *hw, return at86rf230_write_subreg(lp, SR_CCA_MODE, val); } -static int -at86rf212_get_desens_steps(struct at86rf230_local *lp, s32 level) -{ - return (level - lp->data->rssi_base_val) * 100 / 207; -} - -static int -at86rf23x_get_desens_steps(struct at86rf230_local *lp, s32 level) -{ - return (level - lp->data->rssi_base_val) / 2; -} static int -at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) +at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) { struct at86rf230_local *lp = hw->priv; + u32 i; - if (level < lp->data->rssi_base_val || level > 30) - return -EINVAL; + for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) { + if (hw->phy->supported.cca_ed_levels[i] == mbm) + return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i); + } - return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, - lp->data->get_desense_steps(lp, level)); + return -EINVAL; } static int @@ -1365,7 +1245,7 @@ static struct at86rf2xx_chip_data at86rf233_data = { .t_p_ack = 545, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, - .get_desense_steps = at86rf23x_get_desens_steps + .set_txpower = at86rf23x_set_txpower, }; static struct at86rf2xx_chip_data at86rf231_data = { @@ -1378,7 +1258,7 @@ static struct at86rf2xx_chip_data at86rf231_data = { .t_p_ack = 545, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, - .get_desense_steps = at86rf23x_get_desens_steps + .set_txpower = at86rf23x_set_txpower, }; static struct at86rf2xx_chip_data at86rf212_data = { @@ -1391,7 +1271,7 @@ static struct at86rf2xx_chip_data at86rf212_data = { .t_p_ack = 545, .rssi_base_val = -100, .set_channel = at86rf212_set_channel, - .get_desense_steps = at86rf212_get_desens_steps + .set_txpower = at86rf212_set_txpower, }; static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim) @@ -1564,8 +1444,21 @@ at86rf230_detect_device(struct at86rf230_local *lp) } lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AACK | - IEEE802154_HW_TXPOWER | IEEE802154_HW_ARET | - IEEE802154_HW_AFILT | IEEE802154_HW_PROMISCUOUS; + IEEE802154_HW_CSMA_PARAMS | + IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT | + IEEE802154_HW_PROMISCUOUS; + + lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | + WPAN_PHY_FLAG_CCA_ED_LEVEL | + WPAN_PHY_FLAG_CCA_MODE; + + lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | + BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER); + lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) | + BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR); + + lp->hw->phy->supported.cca_ed_levels = at86rf23x_ed_levels; + lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf23x_ed_levels); lp->hw->phy->cca.mode = NL802154_CCA_ENERGY; @@ -1573,36 +1466,49 @@ at86rf230_detect_device(struct at86rf230_local *lp) case 2: chip = "at86rf230"; rc = -ENOTSUPP; - break; + goto not_supp; case 3: chip = "at86rf231"; lp->data = &at86rf231_data; - lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->supported.channels[0] = 0x7FFF800; lp->hw->phy->current_channel = 11; lp->hw->phy->symbol_duration = 16; + lp->hw->phy->supported.tx_powers = at86rf231_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers); break; case 7: chip = "at86rf212"; lp->data = &at86rf212_data; lp->hw->flags |= IEEE802154_HW_LBT; - lp->hw->phy->channels_supported[0] = 0x00007FF; - lp->hw->phy->channels_supported[2] = 0x00007FF; + lp->hw->phy->supported.channels[0] = 0x00007FF; + lp->hw->phy->supported.channels[2] = 0x00007FF; lp->hw->phy->current_channel = 5; lp->hw->phy->symbol_duration = 25; + lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH; + lp->hw->phy->supported.tx_powers = at86rf212_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers); + lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100; + lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100); break; case 11: chip = "at86rf233"; lp->data = &at86rf233_data; - lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->supported.channels[0] = 0x7FFF800; lp->hw->phy->current_channel = 13; lp->hw->phy->symbol_duration = 16; + lp->hw->phy->supported.tx_powers = at86rf233_powers; + lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers); break; default: chip = "unknown"; rc = -ENOTSUPP; - break; + goto not_supp; } + lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7]; + lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0]; + +not_supp: dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version); return rc; |