summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-atmel.c20
-rw-r--r--drivers/spi/spi-bcm2835.c391
-rw-r--r--drivers/spi/spi-bcm53xx.c4
-rw-r--r--drivers/spi/spi-bitbang-txrx.h18
-rw-r--r--drivers/spi/spi-dw-mid.c12
-rw-r--r--drivers/spi/spi-dw-pci.c4
-rw-r--r--drivers/spi/spi-dw.c4
-rw-r--r--drivers/spi/spi-fsl-dspi.c37
-rw-r--r--drivers/spi/spi-img-spfi.c196
-rw-r--r--drivers/spi/spi-imx.c4
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/spi/spi-qup.c9
-rw-r--r--drivers/spi/spi-rockchip.c2
-rw-r--r--drivers/spi/spi-ti-qspi.c22
-rw-r--r--drivers/spi/spi.c9
15 files changed, 465 insertions, 269 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 9af7841f2e8c..a2f40b1b2225 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -180,11 +180,17 @@
| SPI_BF(name, value))
/* Register access macros */
+#ifdef CONFIG_AVR32
#define spi_readl(port, reg) \
__raw_readl((port)->regs + SPI_##reg)
#define spi_writel(port, reg, value) \
__raw_writel((value), (port)->regs + SPI_##reg)
-
+#else
+#define spi_readl(port, reg) \
+ readl_relaxed((port)->regs + SPI_##reg)
+#define spi_writel(port, reg, value) \
+ writel_relaxed((value), (port)->regs + SPI_##reg)
+#endif
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
* cache operations; better heuristics consider wordsize and bitrate.
*/
@@ -764,17 +770,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
(unsigned long long)xfer->rx_dma);
}
- /* REVISIT: We're waiting for ENDRX before we start the next
+ /* REVISIT: We're waiting for RXBUFF before we start the next
* transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
- * to tell the difference between the ENDRX interrupt we're
- * actually waiting for and the ENDRX interrupt of the
+ * issues otherwise. If we wait for TXBUFE in one transfer and
+ * then starts waiting for RXBUFF in the next, it's difficult
+ * to tell the difference between the RXBUFF interrupt we're
+ * actually waiting for and the RXBUFF interrupt of the
* previous transfer.
*
* It should be doable, though. Just not now...
*/
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 419a782ab6d5..f63864a893c5 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2012 Chris Boot
* Copyright (C) 2013 Stephen Warren
+ * Copyright (C) 2015 Martin Sperl
*
* This driver is inspired by:
* spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
@@ -29,6 +30,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
@@ -66,8 +68,10 @@
#define BCM2835_SPI_CS_CS_10 0x00000002
#define BCM2835_SPI_CS_CS_01 0x00000001
-#define BCM2835_SPI_TIMEOUT_MS 30000
-#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS)
+#define BCM2835_SPI_POLLING_LIMIT_US 30
+#define BCM2835_SPI_TIMEOUT_MS 30000
+#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_NO_CS | SPI_3WIRE)
#define DRV_NAME "spi-bcm2835"
@@ -75,10 +79,10 @@ struct bcm2835_spi {
void __iomem *regs;
struct clk *clk;
int irq;
- struct completion done;
const u8 *tx_buf;
u8 *rx_buf;
- int len;
+ int tx_len;
+ int rx_len;
};
static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
@@ -91,205 +95,315 @@ static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
writel(val, bs->regs + reg);
}
-static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs, int len)
+static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs)
{
u8 byte;
- while (len--) {
+ while ((bs->rx_len) &&
+ (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_RXD)) {
byte = bcm2835_rd(bs, BCM2835_SPI_FIFO);
if (bs->rx_buf)
*bs->rx_buf++ = byte;
+ bs->rx_len--;
}
}
-static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs, int len)
+static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs)
{
u8 byte;
- if (len > bs->len)
- len = bs->len;
-
- while (len--) {
+ while ((bs->tx_len) &&
+ (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_TXD)) {
byte = bs->tx_buf ? *bs->tx_buf++ : 0;
bcm2835_wr(bs, BCM2835_SPI_FIFO, byte);
- bs->len--;
+ bs->tx_len--;
}
}
+static void bcm2835_spi_reset_hw(struct spi_master *master)
+{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+
+ /* Disable SPI interrupts and transfer */
+ cs &= ~(BCM2835_SPI_CS_INTR |
+ BCM2835_SPI_CS_INTD |
+ BCM2835_SPI_CS_TA);
+ /* and reset RX/TX FIFOS */
+ cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX;
+
+ /* and reset the SPI_HW */
+ bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+}
+
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
{
struct spi_master *master = dev_id;
struct bcm2835_spi *bs = spi_master_get_devdata(master);
- u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
- /*
- * RXR - RX needs Reading. This means 12 (or more) bytes have been
- * transmitted and hence 12 (or more) bytes have been received.
- *
- * The FIFO is 16-bytes deep. We check for this interrupt to keep the
- * FIFO full; we have a 4-byte-time buffer for IRQ latency. We check
- * this before DONE (TX empty) just in case we delayed processing this
- * interrupt for some reason.
- *
- * We only check for this case if we have more bytes to TX; at the end
- * of the transfer, we ignore this pipelining optimization, and let
- * bcm2835_spi_finish_transfer() drain the RX FIFO.
+ /* Read as many bytes as possible from FIFO */
+ bcm2835_rd_fifo(bs);
+ /* Write as many bytes as possible to FIFO */
+ bcm2835_wr_fifo(bs);
+
+ /* based on flags decide if we can finish the transfer */
+ if (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE) {
+ /* Transfer complete - reset SPI HW */
+ bcm2835_spi_reset_hw(master);
+ /* wake up the framework */
+ complete(&master->xfer_completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr,
+ u32 cs,
+ unsigned long xfer_time_us)
+{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ unsigned long timeout = jiffies +
+ max(4 * xfer_time_us * HZ / 1000000, 2uL);
+
+ /* enable HW block without interrupts */
+ bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
+
+ /* set timeout to 4x the expected time, or 2 jiffies */
+ /* loop until finished the transfer */
+ while (bs->rx_len) {
+ /* read from fifo as much as possible */
+ bcm2835_rd_fifo(bs);
+ /* fill in tx fifo as much as possible */
+ bcm2835_wr_fifo(bs);
+ /* if we still expect some data after the read,
+ * check for a possible timeout
+ */
+ if (bs->rx_len && time_after(jiffies, timeout)) {
+ /* Transfer complete - reset SPI HW */
+ bcm2835_spi_reset_hw(master);
+ /* and return timeout */
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Transfer complete - reset SPI HW */
+ bcm2835_spi_reset_hw(master);
+ /* and return without waiting for completion */
+ return 0;
+}
+
+static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr,
+ u32 cs)
+{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+
+ /* fill in fifo if we have gpio-cs
+ * note that there have been rare events where the native-CS
+ * flapped for <1us which may change the behaviour
+ * with gpio-cs this does not happen, so it is implemented
+ * only for this case
*/
- if (bs->len && (cs & BCM2835_SPI_CS_RXR)) {
- /* Read 12 bytes of data */
- bcm2835_rd_fifo(bs, 12);
-
- /* Write up to 12 bytes */
- bcm2835_wr_fifo(bs, 12);
-
- /*
- * We must have written something to the TX FIFO due to the
- * bs->len check above, so cannot be DONE. Hence, return
- * early. Note that DONE could also be set if we serviced an
- * RXR interrupt really late.
+ if (gpio_is_valid(spi->cs_gpio)) {
+ /* enable HW block, but without interrupts enabled
+ * this would triggern an immediate interrupt
*/
- return IRQ_HANDLED;
+ bcm2835_wr(bs, BCM2835_SPI_CS,
+ cs | BCM2835_SPI_CS_TA);
+ /* fill in tx fifo as much as possible */
+ bcm2835_wr_fifo(bs);
}
/*
- * DONE - TX empty. This occurs when we first enable the transfer
- * since we do not pre-fill the TX FIFO. At any other time, given that
- * we refill the TX FIFO above based on RXR, and hence ignore DONE if
- * RXR is set, DONE really does mean end-of-transfer.
+ * Enable the HW block. This will immediately trigger a DONE (TX
+ * empty) interrupt, upon which we will fill the TX FIFO with the
+ * first TX bytes. Pre-filling the TX FIFO here to avoid the
+ * interrupt doesn't work:-(
*/
- if (cs & BCM2835_SPI_CS_DONE) {
- if (bs->len) { /* First interrupt in a transfer */
- bcm2835_wr_fifo(bs, 16);
- } else { /* Transfer complete */
- /* Disable SPI interrupts */
- cs &= ~(BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD);
- bcm2835_wr(bs, BCM2835_SPI_CS, cs);
-
- /*
- * Wake up bcm2835_spi_transfer_one(), which will call
- * bcm2835_spi_finish_transfer(), to drain the RX FIFO.
- */
- complete(&bs->done);
- }
-
- return IRQ_HANDLED;
- }
+ cs |= BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA;
+ bcm2835_wr(bs, BCM2835_SPI_CS, cs);
- return IRQ_NONE;
+ /* signal that we need to wait for completion */
+ return 1;
}
-static int bcm2835_spi_start_transfer(struct spi_device *spi,
- struct spi_transfer *tfr)
+static int bcm2835_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
unsigned long spi_hz, clk_hz, cdiv;
- u32 cs = BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA;
+ unsigned long spi_used_hz, xfer_time_us;
+ u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ /* set clock */
spi_hz = tfr->speed_hz;
clk_hz = clk_get_rate(bs->clk);
if (spi_hz >= clk_hz / 2) {
cdiv = 2; /* clk_hz/2 is the fastest we can go */
} else if (spi_hz) {
- /* CDIV must be a power of two */
- cdiv = roundup_pow_of_two(DIV_ROUND_UP(clk_hz, spi_hz));
+ /* CDIV must be a multiple of two */
+ cdiv = DIV_ROUND_UP(clk_hz, spi_hz);
+ cdiv += (cdiv % 2);
if (cdiv >= 65536)
cdiv = 0; /* 0 is the slowest we can go */
- } else
+ } else {
cdiv = 0; /* 0 is the slowest we can go */
+ }
+ spi_used_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536);
+ bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
+ /* handle all the modes */
+ if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
+ cs |= BCM2835_SPI_CS_REN;
if (spi->mode & SPI_CPOL)
cs |= BCM2835_SPI_CS_CPOL;
if (spi->mode & SPI_CPHA)
cs |= BCM2835_SPI_CS_CPHA;
- if (!(spi->mode & SPI_NO_CS)) {
- if (spi->mode & SPI_CS_HIGH) {
- cs |= BCM2835_SPI_CS_CSPOL;
- cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
- }
-
- cs |= spi->chip_select;
- }
+ /* for gpio_cs set dummy CS so that no HW-CS get changed
+ * we can not run this in bcm2835_spi_set_cs, as it does
+ * not get called for cs_gpio cases, so we need to do it here
+ */
+ if (gpio_is_valid(spi->cs_gpio) || (spi->mode & SPI_NO_CS))
+ cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
- reinit_completion(&bs->done);
+ /* set transmit buffers and length */
bs->tx_buf = tfr->tx_buf;
bs->rx_buf = tfr->rx_buf;
- bs->len = tfr->len;
+ bs->tx_len = tfr->len;
+ bs->rx_len = tfr->len;
- bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
- /*
- * Enable the HW block. This will immediately trigger a DONE (TX
- * empty) interrupt, upon which we will fill the TX FIFO with the
- * first TX bytes. Pre-filling the TX FIFO here to avoid the
- * interrupt doesn't work:-(
- */
- bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+ /* calculate the estimated time in us the transfer runs */
+ xfer_time_us = tfr->len
+ * 9 /* clocks/byte - SPI-HW waits 1 clock after each byte */
+ * 1000000 / spi_used_hz;
- return 0;
+ /* for short requests run polling*/
+ if (xfer_time_us <= BCM2835_SPI_POLLING_LIMIT_US)
+ return bcm2835_spi_transfer_one_poll(master, spi, tfr,
+ cs, xfer_time_us);
+
+ return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
}
-static int bcm2835_spi_finish_transfer(struct spi_device *spi,
- struct spi_transfer *tfr, bool cs_change)
+static void bcm2835_spi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
- u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ bcm2835_spi_reset_hw(master);
+}
+
+static void bcm2835_spi_set_cs(struct spi_device *spi, bool gpio_level)
+{
+ /*
+ * we can assume that we are "native" as per spi_set_cs
+ * calling us ONLY when cs_gpio is not set
+ * we can also assume that we are CS < 3 as per bcm2835_spi_setup
+ * we would not get called because of error handling there.
+ * the level passed is the electrical level not enabled/disabled
+ * so it has to get translated back to enable/disable
+ * see spi_set_cs in spi.c for the implementation
+ */
- /* Drain RX FIFO */
- while (cs & BCM2835_SPI_CS_RXD) {
- bcm2835_rd_fifo(bs, 1);
- cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ struct spi_master *master = spi->master;
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ bool enable;
+
+ /* calculate the enable flag from the passed gpio_level */
+ enable = (spi->mode & SPI_CS_HIGH) ? gpio_level : !gpio_level;
+
+ /* set flags for "reverse" polarity in the registers */
+ if (spi->mode & SPI_CS_HIGH) {
+ /* set the correct CS-bits */
+ cs |= BCM2835_SPI_CS_CSPOL;
+ cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
+ } else {
+ /* clean the CS-bits */
+ cs &= ~BCM2835_SPI_CS_CSPOL;
+ cs &= ~(BCM2835_SPI_CS_CSPOL0 << spi->chip_select);
}
- if (tfr->delay_usecs)
- udelay(tfr->delay_usecs);
+ /* select the correct chip_select depending on disabled/enabled */
+ if (enable) {
+ /* set cs correctly */
+ if (spi->mode & SPI_NO_CS) {
+ /* use the "undefined" chip-select */
+ cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
+ } else {
+ /* set the chip select */
+ cs &= ~(BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01);
+ cs |= spi->chip_select;
+ }
+ } else {
+ /* disable CSPOL which puts HW-CS into deselected state */
+ cs &= ~BCM2835_SPI_CS_CSPOL;
+ /* use the "undefined" chip-select as precaution */
+ cs |= BCM2835_SPI_CS_CS_10 | BCM2835_SPI_CS_CS_01;
+ }
- if (cs_change)
- /* Clear TA flag */
- bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA);
+ /* finally set the calculated flags in SPI_CS */
+ bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+}
- return 0;
+static int chip_match_name(struct gpio_chip *chip, void *data)
+{
+ return !strcmp(chip->label, data);
}
-static int bcm2835_spi_transfer_one(struct spi_master *master,
- struct spi_message *mesg)
+static int bcm2835_spi_setup(struct spi_device *spi)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
- struct spi_transfer *tfr;
- struct spi_device *spi = mesg->spi;
- int err = 0;
- unsigned int timeout;
- bool cs_change;
-
- list_for_each_entry(tfr, &mesg->transfers, transfer_list) {
- err = bcm2835_spi_start_transfer(spi, tfr);
- if (err)
- goto out;
-
- timeout = wait_for_completion_timeout(&bs->done,
- msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS));
- if (!timeout) {
- err = -ETIMEDOUT;
- goto out;
- }
+ int err;
+ struct gpio_chip *chip;
+ /*
+ * sanity checking the native-chipselects
+ */
+ if (spi->mode & SPI_NO_CS)
+ return 0;
+ if (gpio_is_valid(spi->cs_gpio))
+ return 0;
+ if (spi->chip_select > 1) {
+ /* error in the case of native CS requested with CS > 1
+ * officially there is a CS2, but it is not documented
+ * which GPIO is connected with that...
+ */
+ dev_err(&spi->dev,
+ "setup: only two native chip-selects are supported\n");
+ return -EINVAL;
+ }
+ /* now translate native cs to GPIO */
- cs_change = tfr->cs_change ||
- list_is_last(&tfr->transfer_list, &mesg->transfers);
+ /* get the gpio chip for the base */
+ chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
+ if (!chip)
+ return 0;
- err = bcm2835_spi_finish_transfer(spi, tfr, cs_change);
- if (err)
- goto out;
+ /* and calculate the real CS */
+ spi->cs_gpio = chip->base + 8 - spi->chip_select;
- mesg->actual_length += (tfr->len - bs->len);
- }
+ /* and set up the "mode" and level */
+ dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n",
+ spi->chip_select, spi->cs_gpio);
-out:
- /* Clear FIFOs, and disable the HW block */
- bcm2835_wr(bs, BCM2835_SPI_CS,
- BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
- mesg->status = err;
- spi_finalize_current_message(master);
+ /* set up GPIO as output and pull to the correct level */
+ err = gpio_direction_output(spi->cs_gpio,
+ (spi->mode & SPI_CS_HIGH) ? 0 : 1);
+ if (err) {
+ dev_err(&spi->dev,
+ "could not set CS%i gpio %i as output: %i",
+ spi->chip_select, spi->cs_gpio, err);
+ return err;
+ }
+ /* the implementation of pinctrl-bcm2835 currently does not
+ * set the GPIO value when using gpio_direction_output
+ * so we are setting it here explicitly
+ */
+ gpio_set_value(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
return 0;
}
@@ -312,13 +426,14 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
master->mode_bits = BCM2835_SPI_MODE_BITS;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->num_chipselect = 3;
- master->transfer_one_message = bcm2835_spi_transfer_one;
+ master->setup = bcm2835_spi_setup;
+ master->set_cs = bcm2835_spi_set_cs;
+ master->transfer_one = bcm2835_spi_transfer_one;
+ master->handle_err = bcm2835_spi_handle_err;
master->dev.of_node = pdev->dev.of_node;
bs = spi_master_get_devdata(master);
- init_completion(&bs->done);
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bs->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(bs->regs)) {
@@ -343,13 +458,13 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
clk_prepare_enable(bs->clk);
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
- dev_name(&pdev->dev), master);
+ dev_name(&pdev->dev), master);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_clk_disable;
}
- /* initialise the hardware */
+ /* initialise the hardware with the default polarities */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
index 3fb91c81015a..1520554978a3 100644
--- a/drivers/spi/spi-bcm53xx.c
+++ b/drivers/spi/spi-bcm53xx.c
@@ -44,7 +44,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
u32 tmp;
/* SPE bit has to be 0 before we read MSPI STATUS */
- deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
+ deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
@@ -56,7 +56,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
goto spi_timeout;
/* Check status */
- deadline = jiffies + timeout_ms * HZ / 1000;
+ deadline = jiffies + msecs_to_jiffies(timeout_ms);
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index c616e41521be..06b34e5bcfa3 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -49,12 +49,17 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
+ bool oldbit = !(word & 1);
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0)
- setmosi(spi, word & (1 << 31));
+ if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((word & (1 << 31)) != oldbit) {
+ setmosi(spi, word & (1 << 31));
+ oldbit = word & (1 << 31);
+ }
+ }
spidelay(nsecs); /* T(setup) */
setsck(spi, !cpol);
@@ -76,13 +81,18 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
+ bool oldbit = !(word & (1 << 31));
/* clock starts at inactive polarity */
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on leading edge */
setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0)
- setmosi(spi, word & (1 << 31));
+ if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((word & (1 << 31)) != oldbit) {
+ setmosi(spi, word & (1 << 31));
+ oldbit = word & (1 << 31);
+ }
+ }
spidelay(nsecs); /* T(setup) */
setsck(spi, cpol);
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index a0197fd4e95c..4f8c798e0633 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -108,7 +108,8 @@ static void dw_spi_dma_tx_done(void *arg)
{
struct dw_spi *dws = arg;
- if (test_and_clear_bit(TX_BUSY, &dws->dma_chan_busy) & BIT(RX_BUSY))
+ clear_bit(TX_BUSY, &dws->dma_chan_busy);
+ if (test_bit(RX_BUSY, &dws->dma_chan_busy))
return;
dw_spi_xfer_done(dws);
}
@@ -139,6 +140,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ return NULL;
+
txdesc->callback = dw_spi_dma_tx_done;
txdesc->callback_param = dws;
@@ -153,7 +157,8 @@ static void dw_spi_dma_rx_done(void *arg)
{
struct dw_spi *dws = arg;
- if (test_and_clear_bit(RX_BUSY, &dws->dma_chan_busy) & BIT(TX_BUSY))
+ clear_bit(RX_BUSY, &dws->dma_chan_busy);
+ if (test_bit(TX_BUSY, &dws->dma_chan_busy))
return;
dw_spi_xfer_done(dws);
}
@@ -184,6 +189,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
1,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ return NULL;
+
rxdesc->callback = dw_spi_dma_rx_done;
rxdesc->callback_param = dws;
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 5ba331047cbe..6d331e0db331 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -36,13 +36,13 @@ struct spi_pci_desc {
static struct spi_pci_desc spi_pci_mid_desc_1 = {
.setup = dw_spi_mid_init,
- .num_cs = 32,
+ .num_cs = 5,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
.setup = dw_spi_mid_init,
- .num_cs = 4,
+ .num_cs = 2,
.bus_num = 1,
};
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a97a62b298a..4847afba89f4 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
if (!dws->fifo_len) {
u32 fifo;
- for (fifo = 2; fifo <= 256; fifo++) {
+ for (fifo = 1; fifo < 256; fifo++) {
dw_writew(dws, DW_SPI_TXFLTR, fifo);
if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
break;
}
dw_writew(dws, DW_SPI_TXFLTR, 0);
- dws->fifo_len = (fifo == 2) ? 0 : fifo - 1;
+ dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
}
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index d1a39249704a..82133584c0ea 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -148,23 +148,32 @@ static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
16, 32, 64, 128,
256, 512, 1024, 2048,
4096, 8192, 16384, 32768 };
- int temp, i = 0, j = 0;
-
- temp = clkrate / 2 / speed_hz;
-
- for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
- for (j = 0; j < ARRAY_SIZE(brs); j++) {
- if (pbr_tbl[i] * brs[j] >= temp) {
- *pbr = i;
- *br = j;
- return;
+ int scale_needed, scale, minscale = INT_MAX;
+ int i, j;
+
+ scale_needed = clkrate / speed_hz;
+ if (clkrate % speed_hz)
+ scale_needed++;
+
+ for (i = 0; i < ARRAY_SIZE(brs); i++)
+ for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
+ scale = brs[i] * pbr_tbl[j];
+ if (scale >= scale_needed) {
+ if (scale < minscale) {
+ minscale = scale;
+ *br = i;
+ *pbr = j;
+ }
+ break;
}
}
- pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\
- ,we use the max prescaler value.\n", speed_hz, clkrate);
- *pbr = ARRAY_SIZE(pbr_tbl) - 1;
- *br = ARRAY_SIZE(brs) - 1;
+ if (minscale == INT_MAX) {
+ pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
+ speed_hz, clkrate);
+ *pbr = ARRAY_SIZE(pbr_tbl) - 1;
+ *br = ARRAY_SIZE(brs) - 1;
+ }
}
static int dspi_transfer_write(struct fsl_dspi *dspi)
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index c01567d53581..788e2b176a4f 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -122,36 +123,31 @@ static inline void spfi_start(struct img_spfi *spfi)
spfi_writel(spfi, val, SPFI_CONTROL);
}
-static inline void spfi_stop(struct img_spfi *spfi)
-{
- u32 val;
-
- val = spfi_readl(spfi, SPFI_CONTROL);
- val &= ~SPFI_CONTROL_SPFI_EN;
- spfi_writel(spfi, val, SPFI_CONTROL);
-}
-
static inline void spfi_reset(struct img_spfi *spfi)
{
spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL);
- udelay(1);
spfi_writel(spfi, 0, SPFI_CONTROL);
}
-static void spfi_flush_tx_fifo(struct img_spfi *spfi)
+static int spfi_wait_all_done(struct img_spfi *spfi)
{
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
- spfi_writel(spfi, SPFI_INTERRUPT_SDE, SPFI_INTERRUPT_CLEAR);
while (time_before(jiffies, timeout)) {
- if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) &
- SPFI_INTERRUPT_SDE)
- return;
+ u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
+
+ if (status & SPFI_INTERRUPT_ALLDONETRIG) {
+ spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
+ SPFI_INTERRUPT_CLEAR);
+ return 0;
+ }
cpu_relax();
}
- dev_err(spfi->dev, "Timed out waiting for FIFO to drain\n");
+ dev_err(spfi->dev, "Timed out waiting for transaction to complete\n");
spfi_reset(spfi);
+
+ return -ETIMEDOUT;
}
static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf,
@@ -237,6 +233,7 @@ static int img_spfi_start_pio(struct spi_master *master,
const void *tx_buf = xfer->tx_buf;
void *rx_buf = xfer->rx_buf;
unsigned long timeout;
+ int ret;
if (tx_buf)
tx_bytes = xfer->len;
@@ -269,16 +266,15 @@ static int img_spfi_start_pio(struct spi_master *master,
cpu_relax();
}
+ ret = spfi_wait_all_done(spfi);
+ if (ret < 0)
+ return ret;
+
if (rx_bytes > 0 || tx_bytes > 0) {
dev_err(spfi->dev, "PIO transfer timed out\n");
- spfi_reset(spfi);
return -ETIMEDOUT;
}
- if (tx_buf)
- spfi_flush_tx_fifo(spfi);
- spfi_stop(spfi);
-
return 0;
}
@@ -287,14 +283,12 @@ static void img_spfi_dma_rx_cb(void *data)
struct img_spfi *spfi = data;
unsigned long flags;
- spin_lock_irqsave(&spfi->lock, flags);
+ spfi_wait_all_done(spfi);
+ spin_lock_irqsave(&spfi->lock, flags);
spfi->rx_dma_busy = false;
- if (!spfi->tx_dma_busy) {
- spfi_stop(spfi);
+ if (!spfi->tx_dma_busy)
spi_finalize_current_transfer(spfi->master);
- }
-
spin_unlock_irqrestore(&spfi->lock, flags);
}
@@ -303,16 +297,12 @@ static void img_spfi_dma_tx_cb(void *data)
struct img_spfi *spfi = data;
unsigned long flags;
- spfi_flush_tx_fifo(spfi);
+ spfi_wait_all_done(spfi);
spin_lock_irqsave(&spfi->lock, flags);
-
spfi->tx_dma_busy = false;
- if (!spfi->rx_dma_busy) {
- spfi_stop(spfi);
+ if (!spfi->rx_dma_busy)
spi_finalize_current_transfer(spfi->master);
- }
-
spin_unlock_irqrestore(&spfi->lock, flags);
}
@@ -397,6 +387,75 @@ stop_dma:
return -EIO;
}
+static void img_spfi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct img_spfi *spfi = spi_master_get_devdata(master);
+ unsigned long flags;
+
+ /*
+ * Stop all DMA and reset the controller if the previous transaction
+ * timed-out and never completed it's DMA.
+ */
+ spin_lock_irqsave(&spfi->lock, flags);
+ if (spfi->tx_dma_busy || spfi->rx_dma_busy) {
+ spfi->tx_dma_busy = false;
+ spfi->rx_dma_busy = false;
+
+ dmaengine_terminate_all(spfi->tx_ch);
+ dmaengine_terminate_all(spfi->rx_ch);
+ }
+ spin_unlock_irqrestore(&spfi->lock, flags);
+}
+
+static int img_spfi_prepare(struct spi_master *master, struct spi_message *msg)
+{
+ struct img_spfi *spfi = spi_master_get_devdata(master);
+ u32 val;
+
+ val = spfi_readl(spfi, SPFI_PORT_STATE);
+ if (msg->spi->mode & SPI_CPHA)
+ val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
+ else
+ val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
+ if (msg->spi->mode & SPI_CPOL)
+ val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
+ else
+ val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
+ spfi_writel(spfi, val, SPFI_PORT_STATE);
+
+ return 0;
+}
+
+static int img_spfi_unprepare(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct img_spfi *spfi = spi_master_get_devdata(master);
+
+ spfi_reset(spfi);
+
+ return 0;
+}
+
+static int img_spfi_setup(struct spi_device *spi)
+{
+ int ret;
+
+ ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
+ GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+ dev_name(&spi->dev));
+ if (ret)
+ dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+ spi->cs_gpio);
+
+ return ret;
+}
+
+static void img_spfi_cleanup(struct spi_device *spi)
+{
+ gpio_free(spi->cs_gpio);
+}
+
static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
@@ -405,10 +464,10 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
/*
* output = spfi_clk * (BITCLK / 512), where BITCLK must be a
- * power of 2 up to 256 (where 255 == 256 since BITCLK is 8 bits)
+ * power of 2 up to 128
*/
- div = DIV_ROUND_UP(master->max_speed_hz, xfer->speed_hz);
- div = clamp(512 / (1 << get_count_order(div)), 1, 255);
+ div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz);
+ div = clamp(512 / (1 << get_count_order(div)), 1, 128);
val = spfi_readl(spfi, SPFI_DEVICE_PARAMETER(spi->chip_select));
val &= ~(SPFI_DEVICE_PARAMETER_BITCLK_MASK <<
@@ -416,6 +475,9 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
val |= div << SPFI_DEVICE_PARAMETER_BITCLK_SHIFT;
spfi_writel(spfi, val, SPFI_DEVICE_PARAMETER(spi->chip_select));
+ spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
+ SPFI_TRANSACTION);
+
val = spfi_readl(spfi, SPFI_CONTROL);
val &= ~(SPFI_CONTROL_SEND_DMA | SPFI_CONTROL_GET_DMA);
if (xfer->tx_buf)
@@ -429,25 +491,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
xfer->rx_nbits == SPI_NBITS_QUAD)
val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
- val &= ~SPFI_CONTROL_CONTINUE;
- if (!xfer->cs_change && !list_is_last(&xfer->transfer_list,
- &master->cur_msg->transfers))
- val |= SPFI_CONTROL_CONTINUE;
spfi_writel(spfi, val, SPFI_CONTROL);
-
- val = spfi_readl(spfi, SPFI_PORT_STATE);
- if (spi->mode & SPI_CPHA)
- val |= SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
- else
- val &= ~SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
- if (spi->mode & SPI_CPOL)
- val |= SPFI_PORT_STATE_CK_POL(spi->chip_select);
- else
- val &= ~SPFI_PORT_STATE_CK_POL(spi->chip_select);
- spfi_writel(spfi, val, SPFI_PORT_STATE);
-
- spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
- SPFI_TRANSACTION);
}
static int img_spfi_transfer_one(struct spi_master *master,
@@ -455,25 +499,13 @@ static int img_spfi_transfer_one(struct spi_master *master,
struct spi_transfer *xfer)
{
struct img_spfi *spfi = spi_master_get_devdata(spi->master);
- bool dma_reset = false;
- unsigned long flags;
int ret;
- /*
- * Stop all DMA and reset the controller if the previous transaction
- * timed-out and never completed it's DMA.
- */
- spin_lock_irqsave(&spfi->lock, flags);
- if (spfi->tx_dma_busy || spfi->rx_dma_busy) {
- dev_err(spfi->dev, "SPI DMA still busy\n");
- dma_reset = true;
- }
- spin_unlock_irqrestore(&spfi->lock, flags);
-
- if (dma_reset) {
- dmaengine_terminate_all(spfi->tx_ch);
- dmaengine_terminate_all(spfi->rx_ch);
- spfi_reset(spfi);
+ if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
+ dev_err(spfi->dev,
+ "Transfer length (%d) is greater than the max supported (%d)",
+ xfer->len, SPFI_TRANSACTION_TSIZE_MASK);
+ return -EINVAL;
}
img_spfi_config(master, spi, xfer);
@@ -485,17 +517,6 @@ static int img_spfi_transfer_one(struct spi_master *master,
return ret;
}
-static void img_spfi_set_cs(struct spi_device *spi, bool enable)
-{
- struct img_spfi *spfi = spi_master_get_devdata(spi->master);
- u32 val;
-
- val = spfi_readl(spfi, SPFI_PORT_STATE);
- val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << SPFI_PORT_STATE_DEV_SEL_SHIFT);
- val |= spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT;
- spfi_writel(spfi, val, SPFI_PORT_STATE);
-}
-
static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
@@ -584,14 +605,17 @@ static int img_spfi_probe(struct platform_device *pdev)
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL;
if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode"))
master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD;
- master->num_chipselect = 5;
master->dev.of_node = pdev->dev.of_node;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8);
- master->max_speed_hz = clk_get_rate(spfi->spfi_clk);
- master->min_speed_hz = master->max_speed_hz / 512;
+ master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4;
+ master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512;
- master->set_cs = img_spfi_set_cs;
+ master->setup = img_spfi_setup;
+ master->cleanup = img_spfi_cleanup;
master->transfer_one = img_spfi_transfer_one;
+ master->prepare_message = img_spfi_prepare;
+ master->unprepare_message = img_spfi_unprepare;
+ master->handle_err = img_spfi_handle_err;
spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx");
spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx");
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6fea4af51c41..aea3a67e5ce1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -370,8 +370,6 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
if (spi_imx->dma_is_inited) {
dma = readl(spi_imx->base + MX51_ECSPI_DMA);
- spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
- spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2;
rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
@@ -868,6 +866,8 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
master->max_dma_len = MAX_SDMA_BD_BYTES;
spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
SPI_MASTER_MUST_TX;
+ spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
+ spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
spi_imx->dma_is_inited = 1;
return 0;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 89ca162801da..ee513a85296b 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022)
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
- spi_finalize_current_message(pl022->master);
/* disable the SPI/SSP operation */
writew((readw(SSP_CR1(pl022->virtbase)) &
(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ spi_finalize_current_message(pl022->master);
}
/**
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ff9cdbdb6672..2b2c359f5a50 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -498,7 +498,7 @@ static int spi_qup_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev;
void __iomem *base;
- u32 max_freq, iomode;
+ u32 max_freq, iomode, num_cs;
int ret, irq, size;
dev = &pdev->dev;
@@ -550,10 +550,11 @@ static int spi_qup_probe(struct platform_device *pdev)
}
/* use num-cs unless not present or out of range */
- if (of_property_read_u16(dev->of_node, "num-cs",
- &master->num_chipselect) ||
- (master->num_chipselect > SPI_NUM_CHIPSELECTS))
+ if (of_property_read_u32(dev->of_node, "num-cs", &num_cs) ||
+ num_cs > SPI_NUM_CHIPSELECTS)
master->num_chipselect = SPI_NUM_CHIPSELECTS;
+ else
+ master->num_chipselect = num_cs;
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 1a777dc261d6..5e4e52cbe053 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -519,7 +519,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
}
/* div doesn't support odd number */
- div = max_t(u32, rs->max_freq / rs->speed, 1);
+ div = DIV_ROUND_UP(rs->max_freq, rs->speed);
div = (div + 1) & 0xfffe;
writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 884a716e50cb..5c0616870358 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -101,6 +101,7 @@ struct ti_qspi {
#define QSPI_FLEN(n) ((n - 1) << 0)
/* STATUS REGISTER */
+#define BUSY 0x01
#define WC 0x02
/* INTERRUPT REGISTER */
@@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
}
+static inline u32 qspi_is_busy(struct ti_qspi *qspi)
+{
+ u32 stat;
+ unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
+
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ while ((stat & BUSY) && time_after(timeout, jiffies)) {
+ cpu_relax();
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ }
+
+ WARN(stat & BUSY, "qspi busy\n");
+ return stat & BUSY;
+}
+
static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
{
int wlen, count;
@@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
switch (wlen) {
case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
@@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
if (!wait_for_completion_timeout(&qspi->transfer_complete,
QSPI_COMPLETION_TIMEOUT)) {
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 31d4d9d997e2..865786012579 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -16,7 +16,6 @@
*/
#include <linux/kernel.h>
-#include <linux/kmod.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/cache.h>
@@ -1108,13 +1107,14 @@ void spi_finalize_current_message(struct spi_master *master)
"failed to unprepare message: %d\n", ret);
}
}
+
+ trace_spi_message_done(mesg);
+
master->cur_msg_prepared = false;
mesg->state = NULL;
if (mesg->complete)
mesg->complete(mesg->context);
-
- trace_spi_message_done(mesg);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_message);
@@ -1362,7 +1362,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
spi->dev.of_node = nc;
/* Register the new device */
- request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
rc = spi_add_device(spi);
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
@@ -1896,6 +1895,8 @@ int spi_setup(struct spi_device *spi)
if (!spi->max_speed_hz)
spi->max_speed_hz = spi->master->max_speed_hz;
+ spi_set_cs(spi, false);
+
if (spi->master->setup)
status = spi->master->setup(spi);
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-08 03:02:35 +0000