summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/xilinx_uartps.c30
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 62259f37ddda..6e8ec6e9d5a2 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -33,12 +33,22 @@
#define XUARTPS_MAJOR 0 /* use dynamic node allocation */
#define XUARTPS_MINOR 0 /* works best with devtmpfs */
#define XUARTPS_NR_PORTS 2
-#define XUARTPS_FIFO_SIZE 16 /* FIFO size */
+#define XUARTPS_FIFO_SIZE 64 /* FIFO size */
#define XUARTPS_REGISTER_SPACE 0xFFF
#define xuartps_readl(offset) ioread32(port->membase + offset)
#define xuartps_writel(val, offset) iowrite32(val, port->membase + offset)
+/* Rx Trigger level */
+static int rx_trigger_level = 56;
+module_param(rx_trigger_level, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
+
+/* Rx Timeout */
+static int rx_timeout = 10;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
+
/********************************Register Map********************************/
/** UART
*
@@ -394,7 +404,7 @@ static void xuartps_start_tx(struct uart_port *port)
port->state->xmit.tail = (port->state->xmit.tail + 1) &
(UART_XMIT_SIZE - 1);
}
-
+ xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
/* Enable the TX Empty interrupt */
xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
@@ -528,7 +538,7 @@ static void xuartps_set_termios(struct uart_port *port,
| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
XUARTPS_CR_OFFSET);
- xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
@@ -631,11 +641,17 @@ static int xuartps_startup(struct uart_port *port)
| XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
XUARTPS_MR_OFFSET);
- /* Set the RX FIFO Trigger level to 14 assuming FIFO size as 16 */
- xuartps_writel(14, XUARTPS_RXWM_OFFSET);
+ /*
+ * Set the RX FIFO Trigger level to use most of the FIFO, but it
+ * can be tuned with a module parameter
+ */
+ xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
- /* Receive Timeout register is enabled with value of 10 */
- xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /*
+ * Receive Timeout register is enabled but it
+ * can be tuned with a module parameter
+ */
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
/* Clear out any pending interrupts before enabling them */
xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);