summaryrefslogtreecommitdiff
path: root/drivers/usb/atm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/atm')
-rw-r--r--drivers/usb/atm/Kconfig13
-rw-r--r--drivers/usb/atm/Makefile1
-rw-r--r--drivers/usb/atm/cxacru.c1
-rw-r--r--drivers/usb/atm/speedtch.c1
-rw-r--r--drivers/usb/atm/ueagle-atm.c1820
-rw-r--r--drivers/usb/atm/usbatm.c4
-rw-r--r--drivers/usb/atm/xusbatm.c1
7 files changed, 1836 insertions, 5 deletions
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index f429862e0974..550ddfa71a43 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -44,6 +44,19 @@ config USB_CXACRU
To compile this driver as a module, choose M here: the
module will be called cxacru.
+config USB_UEAGLEATM
+ tristate "ADI 930 and eagle USB DSL modem"
+ depends on USB_ATM
+ select FW_LOADER
+ help
+ Say Y here if you have an ADSL USB modem based on the ADI 930
+ or eagle chipset. In order to use your modem you will need to
+ install firmwares and CMV (Command Management Variables); see
+ <https://gna.org/projects/ueagleatm/> for details.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ueagle-atm.
+
config USB_XUSBATM
tristate "Other USB DSL modem support"
depends on USB_ATM
diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile
index 85099718c683..4c4a776ab1cd 100644
--- a/drivers/usb/atm/Makefile
+++ b/drivers/usb/atm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_USB_CXACRU) += cxacru.o
obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o
+obj-$(CONFIG_USB_UEAGLEATM) += ueagle-atm.o
obj-$(CONFIG_USB_ATM) += usbatm.o
obj-$(CONFIG_USB_XUSBATM) += xusbatm.o
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 9d59dc62e6d2..af0a41e7870e 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -853,7 +853,6 @@ static int cxacru_usb_probe(struct usb_interface *intf, const struct usb_device_
}
static struct usb_driver cxacru_usb_driver = {
- .owner = THIS_MODULE,
.name = cxacru_driver_name,
.probe = cxacru_usb_probe,
.disconnect = usbatm_usb_disconnect,
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index d0cbbb7f0385..b28336148658 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -659,7 +659,6 @@ MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
static struct usb_driver speedtch_usb_driver = {
- .owner = THIS_MODULE,
.name = speedtch_driver_name,
.probe = speedtch_usb_probe,
.disconnect = usbatm_usb_disconnect,
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
new file mode 100644
index 000000000000..7d2a679989ed
--- /dev/null
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -0,0 +1,1820 @@
+/*-
+ * Copyright (c) 2003, 2004
+ * Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
+ *
+ * Copyright (c) 2005 Matthieu Castet <castet.matthieu@free.fr>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice unmodified, this list of conditions, and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * GPL license :
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *
+ * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
+ * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
+ *
+ * The rest of the code was was rewritten from scratch.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+#include <linux/kthread.h>
+#include <linux/version.h>
+#include <asm/unaligned.h>
+
+#include "usbatm.h"
+
+#define EAGLEUSBVERSION "ueagle 1.1"
+
+
+/*
+ * Debug macros
+ */
+#define uea_dbg(usb_dev, format, args...) \
+ do { \
+ if (debug >= 1) \
+ dev_dbg(&(usb_dev)->dev, \
+ "[ueagle-atm dbg] %s: " format, \
+ __FUNCTION__, ##args); \
+ } while (0)
+
+#define uea_vdbg(usb_dev, format, args...) \
+ do { \
+ if (debug >= 2) \
+ dev_dbg(&(usb_dev)->dev, \
+ "[ueagle-atm vdbg] " format, ##args); \
+ } while (0)
+
+#define uea_enters(usb_dev) \
+ uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__)
+
+#define uea_leaves(usb_dev) \
+ uea_vdbg(usb_dev, "leaving %s\n", __FUNCTION__)
+
+#define uea_err(usb_dev, format,args...) \
+ dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args)
+
+#define uea_warn(usb_dev, format,args...) \
+ dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args)
+
+#define uea_info(usb_dev, format,args...) \
+ dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
+
+struct uea_cmvs {
+ u32 address;
+ u16 offset;
+ u32 data;
+} __attribute__ ((packed));
+
+struct uea_softc {
+ struct usb_device *usb_dev;
+ struct usbatm_data *usbatm;
+
+ int modem_index;
+ unsigned int driver_info;
+
+ int booting;
+ int reset;
+
+ wait_queue_head_t sync_q;
+
+ struct task_struct *kthread;
+ u32 data;
+ wait_queue_head_t cmv_ack_wait;
+ int cmv_ack;
+
+ struct work_struct task;
+ u16 pageno;
+ u16 ovl;
+
+ const struct firmware *dsp_firm;
+ struct urb *urb_int;
+
+ u8 cmv_function;
+ u16 cmv_idx;
+ u32 cmv_address;
+ u16 cmv_offset;
+
+ /* keep in sync with eaglectl */
+ struct uea_stats {
+ struct {
+ u32 state;
+ u32 flags;
+ u32 mflags;
+ u32 vidcpe;
+ u32 vidco;
+ u32 dsrate;
+ u32 usrate;
+ u32 dsunc;
+ u32 usunc;
+ u32 dscorr;
+ u32 uscorr;
+ u32 txflow;
+ u32 rxflow;
+ u32 usattenuation;
+ u32 dsattenuation;
+ u32 dsmargin;
+ u32 usmargin;
+ u32 firmid;
+ } phy;
+ } stats;
+};
+
+/*
+ * Elsa IDs
+ */
+#define ELSA_VID 0x05CC
+#define ELSA_PID_PSTFIRM 0x3350
+#define ELSA_PID_PREFIRM 0x3351
+
+/*
+ * Sagem USB IDs
+ */
+#define EAGLE_VID 0x1110
+#define EAGLE_I_PID_PREFIRM 0x9010 /* Eagle I */
+#define EAGLE_I_PID_PSTFIRM 0x900F /* Eagle I */
+
+#define EAGLE_IIC_PID_PREFIRM 0x9024 /* Eagle IIC */
+#define EAGLE_IIC_PID_PSTFIRM 0x9023 /* Eagle IIC */
+
+#define EAGLE_II_PID_PREFIRM 0x9022 /* Eagle II */
+#define EAGLE_II_PID_PSTFIRM 0x9021 /* Eagle II */
+
+/*
+ * Eagle III Pid
+ */
+#define EAGLE_III_PID_PREFIRM 0x9032 /* Eagle III */
+#define EAGLE_III_PID_PSTFIRM 0x9031 /* Eagle III */
+
+/*
+ * USR USB IDs
+ */
+#define USR_VID 0x0BAF
+#define MILLER_A_PID_PREFIRM 0x00F2
+#define MILLER_A_PID_PSTFIRM 0x00F1
+#define MILLER_B_PID_PREFIRM 0x00FA
+#define MILLER_B_PID_PSTFIRM 0x00F9
+#define HEINEKEN_A_PID_PREFIRM 0x00F6
+#define HEINEKEN_A_PID_PSTFIRM 0x00F5
+#define HEINEKEN_B_PID_PREFIRM 0x00F8
+#define HEINEKEN_B_PID_PSTFIRM 0x00F7
+
+#define PREFIRM 0
+#define PSTFIRM (1<<7)
+enum {
+ ADI930 = 0,
+ EAGLE_I,
+ EAGLE_II,
+ EAGLE_III
+};
+
+/* macros for both struct usb_device_id and struct uea_softc */
+#define UEA_IS_PREFIRM(x) \
+ (!((x)->driver_info & PSTFIRM))
+#define UEA_CHIP_VERSION(x) \
+ ((x)->driver_info & 0xf)
+
+#define IS_ISDN(sc) \
+ (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)
+
+#define INS_TO_USBDEV(ins) ins->usb_dev
+
+#define GET_STATUS(data) \
+ ((data >> 8) & 0xf)
+#define IS_OPERATIONAL(sc) \
+ (GET_STATUS(sc->stats.phy.state) == 2)
+
+/*
+ * Set of macros to handle unaligned data in the firmware blob.
+ * The FW_GET_BYTE() macro is provided only for consistency.
+ */
+
+#define FW_GET_BYTE(p) *((__u8 *) (p))
+#define FW_GET_WORD(p) le16_to_cpu(get_unaligned((__le16 *) (p)))
+#define FW_GET_LONG(p) le32_to_cpu(get_unaligned((__le32 *) (p)))
+
+#define FW_DIR "ueagle-atm/"
+#define NB_MODEM 4
+
+#define BULK_TIMEOUT 300
+#define CTRL_TIMEOUT 1000
+
+#define ACK_TIMEOUT msecs_to_jiffies(1500)
+
+#define UEA_INTR_IFACE_NO 0
+#define UEA_US_IFACE_NO 1
+#define UEA_DS_IFACE_NO 2
+
+#define FASTEST_ISO_INTF 8
+
+#define UEA_BULK_DATA_PIPE 0x02
+#define UEA_IDMA_PIPE 0x04
+#define UEA_INTR_PIPE 0x04
+#define UEA_ISO_DATA_PIPE 0x08
+
+#define UEA_SET_BLOCK 0x0001
+#define UEA_SET_MODE 0x0003
+#define UEA_SET_2183_DATA 0x0004
+#define UEA_SET_TIMEOUT 0x0011
+
+#define UEA_LOOPBACK_OFF 0x0002
+#define UEA_LOOPBACK_ON 0x0003
+#define UEA_BOOT_IDMA 0x0006
+#define UEA_START_RESET 0x0007
+#define UEA_END_RESET 0x0008
+
+#define UEA_SWAP_MAILBOX (0x3fcd | 0x4000)
+#define UEA_MPTX_START (0x3fce | 0x4000)
+#define UEA_MPTX_MAILBOX (0x3fd6 | 0x4000)
+#define UEA_MPRX_MAILBOX (0x3fdf | 0x4000)
+
+/* structure describing a block within a DSP page */
+struct block_info {
+ __le16 wHdr;
+#define UEA_BIHDR 0xabcd
+ __le16 wAddress;
+ __le16 wSize;
+ __le16 wOvlOffset;
+ __le16 wOvl; /* overlay */
+ __le16 wLast;
+} __attribute__ ((packed));
+#define BLOCK_INFO_SIZE 12
+
+/* structure representing a CMV (Configuration and Management Variable) */
+struct cmv {
+ __le16 wPreamble;
+#define PREAMBLE 0x535c
+ __u8 bDirection;
+#define MODEMTOHOST 0x01
+#define HOSTTOMODEM 0x10
+ __u8 bFunction;
+#define FUNCTION_TYPE(f) ((f) >> 4)
+#define MEMACCESS 0x1
+#define ADSLDIRECTIVE 0x7
+
+#define FUNCTION_SUBTYPE(f) ((f) & 0x0f)
+/* for MEMACCESS */
+#define REQUESTREAD 0x0
+#define REQUESTWRITE 0x1
+#define REPLYREAD 0x2
+#define REPLYWRITE 0x3
+/* for ADSLDIRECTIVE */
+#define KERNELREADY 0x0
+#define MODEMREADY 0x1
+
+#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
+ __le16 wIndex;
+ __le32 dwSymbolicAddress;
+#define MAKESA(a, b, c, d) \
+ (((c) & 0xff) << 24 | \
+ ((d) & 0xff) << 16 | \
+ ((a) & 0xff) << 8 | \
+ ((b) & 0xff))
+
+#define SA_CNTL MAKESA('C', 'N', 'T', 'L')
+#define SA_DIAG MAKESA('D', 'I', 'A', 'G')
+#define SA_INFO MAKESA('I', 'N', 'F', 'O')
+#define SA_OPTN MAKESA('O', 'P', 'T', 'N')
+#define SA_RATE MAKESA('R', 'A', 'T', 'E')
+#define SA_STAT MAKESA('S', 'T', 'A', 'T')
+ __le16 wOffsetAddress;
+ __le32 dwData;
+} __attribute__ ((packed));
+#define CMV_SIZE 16
+
+/* structure representing swap information */
+struct swap_info {
+ __u8 bSwapPageNo;
+ __u8 bOvl; /* overlay */
+} __attribute__ ((packed));
+
+/* structure representing interrupt data */
+struct intr_pkt {
+ __u8 bType;
+ __u8 bNotification;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+ __le16 wInterrupt;
+#define INT_LOADSWAPPAGE 0x0001
+#define INT_INCOMINGCMV 0x0002
+ union {
+ struct {
+ struct swap_info swapinfo;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s1;
+
+ struct {
+ struct cmv cmv;
+ __le16 wDataSize;
+ } __attribute__ ((packed)) s2;
+ } __attribute__ ((packed)) u;
+#define bSwapPageNo u.s1.swapinfo.bSwapPageNo
+#define bOvl u.s1.swapinfo.bOvl
+} __attribute__ ((packed));
+#define INTR_PKT_SIZE 28
+
+static struct usb_driver uea_driver;
+static DECLARE_MUTEX(uea_semaphore);
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
+
+static int modem_index;
+static unsigned int debug;
+static int sync_wait[NB_MODEM];
+static char *cmv_file[NB_MODEM];
+
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(sync_wait, bool, NULL, 0644);
+MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
+module_param_array(cmv_file, charp, NULL, 0644);
+MODULE_PARM_DESC(cmv_file,
+ "file name with configuration and management variables");
+
+#define UPDATE_ATM_STAT(type, val) \
+ do { \
+ if (sc->usbatm->atm_dev) \
+ sc->usbatm->atm_dev->type = val; \
+ } while (0)
+
+/* Firmware loading */
+#define LOAD_INTERNAL 0xA0
+#define F8051_USBCS 0x7f92
+
+/**
+ * uea_send_modem_cmd - Send a command for pre-firmware devices.
+ */
+static int uea_send_modem_cmd(struct usb_device *usb,
+ u16 addr, u16 size, u8 * buff)
+{
+ int ret = -ENOMEM;
+ u8 *xfer_buff;
+
+ xfer_buff = kmalloc(size, GFP_KERNEL);
+ if (xfer_buff) {
+ memcpy(xfer_buff, buff, size);
+ ret = usb_control_msg(usb,
+ usb_sndctrlpipe(usb, 0),
+ LOAD_INTERNAL,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, addr, 0, xfer_buff,
+ size, CTRL_TIMEOUT);
+ kfree(xfer_buff);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ return (ret == size) ? 0 : -EIO;
+}
+
+static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context)
+{
+ struct usb_device *usb = context;
+ u8 *pfw, value;
+ u32 crc = 0;
+ int ret, size;
+
+ uea_enters(usb);
+ if (!fw_entry) {
+ uea_err(usb, "firmware is not available\n");
+ goto err;
+ }
+
+ pfw = fw_entry->data;
+ size = fw_entry->size;
+ if (size < 4)
+ goto err_fw_corrupted;
+
+ crc = FW_GET_LONG(pfw);
+ pfw += 4;
+ size -= 4;
+ if (crc32_be(0, pfw, size) != crc)
+ goto err_fw_corrupted;
+
+ /*
+ * Start to upload formware : send reset
+ */
+ value = 1;
+ ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
+
+ if (ret < 0) {
+ uea_err(usb, "modem reset failed with error %d\n", ret);
+ goto err;
+ }
+
+ while (size > 3) {
+ u8 len = FW_GET_BYTE(pfw);
+ u16 add = FW_GET_WORD(pfw + 1);
+
+ size -= len + 3;
+ if (size < 0)
+ goto err_fw_corrupted;
+
+ ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
+ if (ret < 0) {
+ uea_err(usb, "uploading firmware data failed "
+ "with error %d\n", ret);
+ goto err;
+ }
+ pfw += len + 3;
+ }
+
+ if (size != 0)
+ goto err_fw_corrupted;
+
+ /*
+ * Tell the modem we finish : de-assert reset
+ */
+ value = 0;
+ ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
+ if (ret < 0)
+ uea_err(usb, "modem de-assert failed with error %d\n", ret);
+ else
+ uea_info(usb, "firmware uploaded\n");
+
+ uea_leaves(usb);
+ return;
+
+err_fw_corrupted:
+ uea_err(usb, "firmware is corrupted\n");
+err:
+ uea_leaves(usb);
+}
+
+/**
+ * uea_load_firmware - Load usb firmware for pre-firmware devices.
+ */
+static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
+{
+ int ret;
+ char *fw_name = FW_DIR "eagle.fw";
+
+ uea_enters(usb);
+ uea_info(usb, "pre-firmware device, uploading firmware\n");
+
+ switch (ver) {
+ case ADI930:
+ fw_name = FW_DIR "adi930.fw";
+ break;
+ case EAGLE_I:
+ fw_name = FW_DIR "eagleI.fw";
+ break;
+ case EAGLE_II:
+ fw_name = FW_DIR "eagleII.fw";
+ break;
+ case EAGLE_III:
+ fw_name = FW_DIR "eagleIII.fw";
+ break;
+ }
+
+ ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware);
+ if (ret)
+ uea_err(usb, "firmware %s is not available\n", fw_name);
+ else
+ uea_info(usb, "loading firmware %s\n", fw_name);
+
+ uea_leaves(usb);
+ return ret;
+}
+
+/* modem management : dsp firmware, send/read CMV, monitoring statistic
+ */
+
+/*
+ * Make sure that the DSP code provided is safe to use.
+ */
+static int check_dsp(u8 *dsp, unsigned int len)
+{
+ u8 pagecount, blockcount;
+ u16 blocksize;
+ u32 pageoffset;
+ unsigned int i, j, p, pp;
+
+ pagecount = FW_GET_BYTE(dsp);
+ p = 1;
+
+ /* enough space for page offsets? */
+ if (p + 4 * pagecount > len)
+ return 1;
+
+ for (i = 0; i < pagecount; i++) {
+
+ pageoffset = FW_GET_LONG(dsp + p);
+ p += 4;
+
+ if (pageoffset == 0)
+ continue;
+
+ /* enough space for blockcount? */
+ if (pageoffset >= len)
+ return 1;
+
+ pp = pageoffset;
+ blockcount = FW_GET_BYTE(dsp + pp);
+ pp += 1;
+
+ for (j = 0; j < blockcount; j++) {
+
+ /* enough space for block header? */
+ if (pp + 4 > len)
+ return 1;
+
+ pp += 2; /* skip blockaddr */
+ blocksize = FW_GET_WORD(dsp + pp);
+ pp += 2;
+
+ /* enough space for block data? */
+ if (pp + blocksize > len)
+ return 1;
+
+ pp += blocksize;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * send data to the idma pipe
+ * */
+static int uea_idma_write(struct uea_softc *sc, void *data, u32 size)
+{
+ int ret = -ENOMEM;
+ u8 *xfer_buff;
+ int bytes_read;
+
+ xfer_buff = kmalloc(size, GFP_KERNEL);
+ if (!xfer_buff) {
+ uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+ return ret;
+ }
+
+ memcpy(xfer_buff, data, size);
+
+ ret = usb_bulk_msg(sc->usb_dev,
+ usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
+ xfer_buff, size, &bytes_read, BULK_TIMEOUT);
+
+ kfree(xfer_buff);
+ if (ret < 0)
+ return ret;
+ if (size != bytes_read) {
+ uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
+ bytes_read);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int request_dsp(struct uea_softc *sc)
+{
+ int ret;
+ char *dsp_name;
+
+ if (UEA_CHIP_VERSION(sc) == ADI930) {
+ if (IS_ISDN(sc))
+ dsp_name = FW_DIR "DSP9i.bin";
+ else
+ dsp_name = FW_DIR "DSP9p.bin";
+ } else {
+ if (IS_ISDN(sc))
+ dsp_name = FW_DIR "DSPei.bin";
+ else
+ dsp_name = FW_DIR "DSPep.bin";
+ }
+
+ ret = request_firmware(&sc->dsp_firm,
+ dsp_name, &sc->usb_dev->dev);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc),
+ "requesting firmware %s failed with error %d\n",
+ dsp_name, ret);
+ return ret;
+ }
+
+ if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) {
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+ dsp_name);
+ release_firmware(sc->dsp_firm);
+ sc->dsp_firm = NULL;
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+/*
+ * The uea_load_page() function must be called within a process context
+ */
+static void uea_load_page(void *xsc)
+{
+ struct uea_softc *sc = xsc;
+ u16 pageno = sc->pageno;
+ u16 ovl = sc->ovl;
+ struct block_info bi;
+
+ u8 *p;
+ u8 pagecount, blockcount;
+ u16 blockaddr, blocksize;
+ u32 pageoffset;
+ int i;
+
+ /* reload firmware when reboot start and it's loaded already */
+ if (ovl == 0 && pageno == 0 && sc->dsp_firm) {
+ release_firmware(sc->dsp_firm);
+ sc->dsp_firm = NULL;
+ }
+
+ if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
+ return;
+
+ p = sc->dsp_firm->data;
+ pagecount = FW_GET_BYTE(p);
+ p += 1;
+
+ if (pageno >= pagecount)
+ goto bad1;
+
+ p += 4 * pageno;
+ pageoffset = FW_GET_LONG(p);
+
+ if (pageoffset == 0)
+ goto bad1;
+
+ p = sc->dsp_firm->data + pageoffset;
+ blockcount = FW_GET_BYTE(p);
+ p += 1;
+
+ uea_dbg(INS_TO_USBDEV(sc),
+ "sending %u blocks for DSP page %u\n", blockcount, pageno);
+
+ bi.wHdr = cpu_to_le16(UEA_BIHDR);
+ bi.wOvl = cpu_to_le16(ovl);
+ bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);
+
+ for (i = 0; i < blockcount; i++) {
+ blockaddr = FW_GET_WORD(p);
+ p += 2;
+
+ blocksize = FW_GET_WORD(p);
+ p += 2;
+
+ bi.wSize = cpu_to_le16(blocksize);
+ bi.wAddress = cpu_to_le16(blockaddr);
+ bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
+
+ /* send block info through the IDMA pipe */
+ if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE))
+ goto bad2;
+
+ /* send block data through the IDMA pipe */
+ if (uea_idma_write(sc, p, blocksize))
+ goto bad2;
+
+ p += blocksize;
+ }
+
+ return;
+
+bad2:
+ uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
+ return;
+bad1:
+ uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno);
+}
+
+static inline void wake_up_cmv_ack(struct uea_softc *sc)
+{
+ sc->cmv_ack = 1;
+ wake_up(&sc->cmv_ack_wait);
+}
+
+static inline int wait_cmv_ack(struct uea_softc *sc)
+{
+ int ret = wait_event_timeout(sc->cmv_ack_wait,
+ sc->cmv_ack, ACK_TIMEOUT);
+ sc->cmv_ack = 0;
+
+ if (ret < 0)
+ return ret;
+
+ return (ret == 0) ? -ETIMEDOUT : 0;
+
+}
+
+#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
+
+static int uea_request(struct uea_softc *sc,
+ u16 value, u16 index, u16 size, void *data)
+{
+ u8 *xfer_buff;
+ int ret = -ENOMEM;
+
+ xfer_buff = kmalloc(size, GFP_KERNEL);
+ if (!xfer_buff) {
+ uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
+ return ret;
+ }
+ memcpy(xfer_buff, data, size);
+
+ ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
+ UCDC_SEND_ENCAPSULATED_COMMAND,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, xfer_buff, size, CTRL_TIMEOUT);
+
+ kfree(xfer_buff);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
+ return ret;
+ }
+
+ if (ret != size) {
+ uea_err(INS_TO_USBDEV(sc),
+ "usb_control_msg send only %d bytes (instead of %d)\n",
+ ret, size);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int uea_cmv(struct uea_softc *sc,
+ u8 function, u32 address, u16 offset, u32 data)
+{
+ struct cmv cmv;
+ int ret;
+
+ /* we send a request, but we expect a reply */
+ sc->cmv_function = function | 0x2;
+ sc->cmv_idx++;
+ sc->cmv_address = address;
+ sc->cmv_offset = offset;
+
+ cmv.wPreamble = cpu_to_le16(PREAMBLE);
+ cmv.bDirection = HOSTTOMODEM;
+ cmv.bFunction = function;
+ cmv.wIndex = cpu_to_le16(sc->cmv_idx);
+ put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress);
+ cmv.wOffsetAddress = cpu_to_le16(offset);
+ put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData);
+
+ ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
+ if (ret < 0)
+ return ret;
+ return wait_cmv_ack(sc);
+}
+
+static inline int uea_read_cmv(struct uea_softc *sc,
+ u32 address, u16 offset, u32 *data)
+{
+ int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD),
+ address, offset, 0);
+ if (ret < 0)
+ uea_err(INS_TO_USBDEV(sc),
+ "reading cmv failed with error %d\n", ret);
+ else
+ *data = sc->data;
+
+ return ret;
+}
+
+static inline int uea_write_cmv(struct uea_softc *sc,
+ u32 address, u16 offset, u32 data)
+{
+ int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE),
+ address, offset, data);
+ if (ret < 0)
+ uea_err(INS_TO_USBDEV(sc),
+ "writing cmv failed with error %d\n", ret);
+
+ return ret;
+}
+
+/*
+ * Monitor the modem and update the stat
+ * return 0 if everything is ok
+ * return < 0 if an error occurs (-EAGAIN reboot needed)
+ */
+static int uea_stat(struct uea_softc *sc)
+{
+ u32 data;
+ int ret;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ data = sc->stats.phy.state;
+
+ ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state);
+ if (ret < 0)
+ return ret;
+
+ switch (GET_STATUS(sc->stats.phy.state)) {
+ case 0: /* not yet synchronized */
+ uea_dbg(INS_TO_USBDEV(sc),
+ "modem not yet synchronized\n");
+ return 0;
+
+ case 1: /* initialization */
+ uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+ return 0;
+
+ case 2: /* operational */
+ uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
+ break;
+
+ case 3: /* fail ... */
+ uea_info(INS_TO_USBDEV(sc), "modem synchronization failed\n");
+ return -EAGAIN;
+
+ case 4 ... 6: /* test state */
+ uea_warn(INS_TO_USBDEV(sc),
+ "modem in test mode - not supported\n");
+ return -EAGAIN;
+
+ case 7: /* fast-retain ... */
+ uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
+ return 0;
+ default:
+ uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
+ GET_STATUS(sc->stats.phy.state));
+ return -EAGAIN;
+ }
+
+ if (GET_STATUS(data) != 2) {
+ uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
+ uea_info(INS_TO_USBDEV(sc), "modem operational\n");
+
+ /* release the dsp firmware as it is not needed until
+ * the next failure
+ */
+ if (sc->dsp_firm) {
+ release_firmware(sc->dsp_firm);
+ sc->dsp_firm = NULL;
+ }
+
+ ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid);
+ if (ret < 0)
+ return ret;
+ uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
+ sc->stats.phy.firmid);
+ }
+
+ /* always update it as atm layer could not be init when we switch to
+ * operational state
+ */
+ UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+
+ /* wake up processes waiting for synchronization */
+ wake_up(&sc->sync_q);
+
+ ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.mflags |= sc->stats.phy.flags;
+
+ /* in case of a flags ( for example delineation LOSS (& 0x10)),
+ * we check the status again in order to detect the failure earlier
+ */
+ if (sc->stats.phy.flags) {
+ uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n",
+ sc->stats.phy.flags);
+ return 0;
+ }
+
+ ret = uea_read_cmv(sc, SA_RATE, 0, &data);
+ if (ret < 0)
+ return ret;
+
+ /* in bulk mode the modem have problem with high rate
+ * changing internal timing could improve things, but the
+ * value is misterious.
+ * ADI930 don't support it (-EPIPE error).
+ */
+ if (UEA_CHIP_VERSION(sc) != ADI930
+ && sc->stats.phy.dsrate != (data >> 16) * 32) {
+ /* Original timming from ADI(used in windows driver)
+ * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
+ */
+ u16 timeout = (data <= 0x20ffff) ? 0 : 1;
+ ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
+ uea_info(INS_TO_USBDEV(sc),
+ "setting new timeout %d%s\n", timeout,
+ ret < 0?" failed":"");
+ }
+ sc->stats.phy.dsrate = (data >> 16) * 32;
+ sc->stats.phy.usrate = (data & 0xffff) * 32;
+ UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
+
+ ret = uea_read_cmv(sc, SA_DIAG, 23, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.dsattenuation = (data & 0xff) / 2;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 47, &data);
+ if (ret < 0)
+ return ret;
+ sc->stats.phy.usattenuation = (data & 0xff) / 2;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc);
+ if (ret < 0)
+ return ret;
+
+ /* only for atu-c */
+ ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr);
+ if (ret < 0)
+ return ret;
+
+ /* only for atu-c */
+ ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco);
+ if (ret < 0)
+ return ret;
+
+ ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int request_cmvs(struct uea_softc *sc,
+ struct uea_cmvs **cmvs, const struct firmware **fw)
+{
+ int ret, size;
+ u8 *data;
+ char *file;
+ static char cmv_name[256] = FW_DIR;
+
+ if (cmv_file[sc->modem_index] == NULL) {
+ if (UEA_CHIP_VERSION(sc) == ADI930)
+ file = (IS_ISDN(sc)) ? "CMV9i.bin" : "CMV9p.bin";
+ else
+ file = (IS_ISDN(sc)) ? "CMVei.bin" : "CMVep.bin";
+ } else
+ file = cmv_file[sc->modem_index];
+
+ strcpy(cmv_name, FW_DIR);
+ strlcat(cmv_name, file, sizeof(cmv_name));
+
+ ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc),
+ "requesting firmware %s failed with error %d\n",
+ cmv_name, ret);
+ return ret;
+ }
+
+ data = (u8 *) (*fw)->data;
+ size = *data * sizeof(struct uea_cmvs) + 1;
+ if (size != (*fw)->size) {
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+ cmv_name);
+ release_firmware(*fw);
+ return -EILSEQ;
+ }
+
+ *cmvs = (struct uea_cmvs *)(data + 1);
+ return *data;
+}
+
+/* Start boot post firmware modem:
+ * - send reset commands through usb control pipe
+ * - start workqueue for DSP loading
+ * - send CMV options to modem
+ */
+
+static int uea_start_reset(struct uea_softc *sc)
+{
+ u16 zero = 0; /* ;-) */
+ int i, len, ret;
+ struct uea_cmvs *cmvs;
+ const struct firmware *cmvs_fw;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
+
+ sc->booting = 1;
+ UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
+
+ /* reset statistics */
+ memset(&sc->stats, 0, sizeof(struct uea_stats));
+
+ /* tell the modem that we want to boot in IDMA mode */
+ uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+ uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
+
+ /* enter reset mode */
+ uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
+
+ /* original driver use 200ms, but windows driver use 100ms */
+ msleep(100);
+
+ /* leave reset mode */
+ uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
+
+ /* clear tx and rx mailboxes */
+ uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
+ uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
+ uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
+
+ msleep(1000);
+ sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
+ sc->booting = 0;
+
+ /* start loading DSP */
+ sc->pageno = 0;
+ sc->ovl = 0;
+ schedule_work(&sc->task);
+
+ /* wait for modem ready CMV */
+ ret = wait_cmv_ack(sc);
+ if (ret < 0)
+ return ret;
+
+ /* Enter in R-IDLE (cmv) until instructed otherwise */
+ ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
+ if (ret < 0)
+ return ret;
+
+ /* get options */
+ ret = len = request_cmvs(sc, &cmvs, &cmvs_fw);
+ if (ret < 0)
+ return ret;
+
+ /* send options */
+ for (i = 0; i < len; i++) {
+ ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address),
+ FW_GET_WORD(&cmvs[i].offset),
+ FW_GET_LONG(&cmvs[i].data));
+ if (ret < 0)
+ goto out;
+ }
+ /* Enter in R-ACT-REQ */
+ ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
+out:
+ release_firmware(cmvs_fw);
+ sc->reset = 0;
+ uea_leaves(INS_TO_USBDEV(sc));
+ return ret;
+}
+
+/*
+ * In case of an error wait 1s before rebooting the modem
+ * if the modem don't request reboot (-EAGAIN).
+ * Monitor the modem every 1s.
+ */
+
+static int uea_kthread(void *data)
+{
+ struct uea_softc *sc = data;
+ int ret = -EAGAIN;
+
+ uea_enters(INS_TO_USBDEV(sc));
+ while (!kthread_should_stop()) {
+ if (ret < 0 || sc->reset)
+ ret = uea_start_reset(sc);
+ if (!ret)
+ ret = uea_stat(sc);
+ if (ret != -EAGAIN)
+ msleep(1000);
+ }
+ uea_leaves(INS_TO_USBDEV(sc));
+ return ret;
+}
+
+/* Load second usb firmware for ADI930 chip */
+static int load_XILINX_firmware(struct uea_softc *sc)
+{
+ const struct firmware *fw_entry;
+ int ret, size, u, ln;
+ u8 *pfw, value;
+ char *fw_name = FW_DIR "930-fpga.bin";
+
+ uea_enters(INS_TO_USBDEV(sc));
+
+ ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
+ if (ret) {
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
+ fw_name);
+ goto err0;
+ }
+
+ pfw = fw_entry->data;
+ size = fw_entry->size;
+ if (size != 0x577B) {
+ uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
+ fw_name);
+ ret = -EILSEQ;
+ goto err1;
+ }
+ for (u = 0; u < size; u += ln) {
+ ln = min(size - u, 64);
+ ret = uea_request(sc, 0xe, 0, ln, pfw + u);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc),
+ "elsa download data failed (%d)\n", ret);
+ goto err1;
+ }
+ }
+
+ /* finish to send the fpga
+ */
+ ret = uea_request(sc, 0xe, 1, 0, NULL);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc),
+ "elsa download data failed (%d)\n", ret);
+ goto err1;
+ }
+
+ /*
+ * Tell the modem we finish : de-assert reset
+ */
+ value = 0;
+ ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
+ if (ret < 0)
+ uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
+
+
+err1:
+ release_firmware(fw_entry);
+err0:
+ uea_leaves(INS_TO_USBDEV(sc));
+ return ret;
+}
+
+static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
+{
+ uea_enters(INS_TO_USBDEV(sc));
+ if (le16_to_cpu(cmv->wPreamble) != PREAMBLE)
+ goto bad1;
+
+ if (cmv->bDirection != MODEMTOHOST)
+ goto bad1;
+
+ /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
+ * the first MEMACESS cmv. Ignore it...
+ */
+ if (cmv->bFunction != sc->cmv_function) {
+ if (UEA_CHIP_VERSION(sc) == ADI930
+ && cmv->bFunction == MAKEFUNCTION(2, 2)) {
+ cmv->wIndex = cpu_to_le16(sc->cmv_idx);
+ put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress);
+ cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset);
+ }
+ else
+ goto bad2;
+ }
+
+ if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
+ wake_up_cmv_ack(sc);
+ return;
+ }
+
+ /* in case of MEMACCESS */
+ if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx ||
+ le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) !=
+ sc->cmv_address
+ || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset)
+ goto bad2;
+
+ sc->data = le32_to_cpu(get_unaligned(&cmv->dwData));
+ sc->data = sc->data << 16 | sc->data >> 16;
+
+ wake_up_cmv_ack(sc);
+ return;
+
+bad2:
+ uea_err(INS_TO_USBDEV(sc), "unexpected cmv received,"
+ "Function : %d, Subfunction : %d\n",
+ FUNCTION_TYPE(cmv->bFunction),
+ FUNCTION_SUBTYPE(cmv->bFunction));
+ return;
+
+bad1:
+ uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
+ "wPreamble %d, bDirection %d\n",
+ le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+}
+
+/*
+ * interrupt handler
+ */
+static void uea_intr(struct urb *urb, struct pt_regs *regs)
+{
+ struct uea_softc *sc = (struct uea_softc *)urb->context;
+ struct intr_pkt *intr;
+ uea_enters(INS_TO_USBDEV(sc));
+
+ if (urb->status < 0) {
+ uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
+ urb->status);
+ return;
+ }
+
+ intr = (struct intr_pkt *) urb->transfer_buffer;
+
+ /* device-to-host interrupt */
+ if (intr->bType != 0x08 || sc->booting) {
+ uea_err(INS_TO_USBDEV(sc), "wrong intr\n");
+ // rebooting ?
+ // sc->reset = 1;
+ goto resubmit;
+ }
+
+ switch (le16_to_cpu(intr->wInterrupt)) {
+ case INT_LOADSWAPPAGE:
+ sc->pageno = intr->bSwapPageNo;
+ sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4;
+ schedule_work(&sc->task);
+ break;
+
+ case INT_INCOMINGCMV:
+ uea_dispatch_cmv(sc, &intr->u.s2.cmv);
+ break;
+
+ default:
+ uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n",
+ le16_to_cpu(intr->wInterrupt));
+ }
+
+resubmit:
+ usb_submit_urb(sc->urb_int, GFP_ATOMIC);
+}
+
+/*
+ * Start the modem : init the data and start kernel thread
+ */
+static int uea_boot(struct uea_softc *sc)
+{
+ int ret;
+ struct intr_pkt *intr;
+
+ uea_enters(INS_TO_USBDEV(sc));
+
+ INIT_WORK(&sc->task, uea_load_page, sc);
+ init_waitqueue_head(&sc->sync_q);
+ init_waitqueue_head(&sc->cmv_ack_wait);
+
+ if (UEA_CHIP_VERSION(sc) == ADI930)
+ load_XILINX_firmware(sc);
+
+ intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL);
+ if (!intr) {
+ uea_err(INS_TO_USBDEV(sc),
+ "cannot allocate interrupt package\n");
+ uea_leaves(INS_TO_USBDEV(sc));
+ return -ENOMEM;
+ }
+
+ sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
+ if (!sc->urb_int) {
+ uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
+ goto err;
+ }
+
+ usb_fill_int_urb(sc->urb_int, sc->usb_dev,
+ usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
+ intr, INTR_PKT_SIZE, uea_intr, sc,
+ sc->usb_dev->actconfig->interface[0]->altsetting[0].
+ endpoint[0].desc.bInterval);
+
+ ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
+ if (ret < 0) {
+ uea_err(INS_TO_USBDEV(sc),
+ "urb submition failed with error %d\n", ret);
+ goto err1;
+ }
+
+ sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
+ if (sc->kthread == ERR_PTR(-ENOMEM)) {
+ uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+ goto err2;
+ }
+
+ uea_leaves(INS_TO_USBDEV(sc));
+ return 0;
+
+err2:
+ usb_kill_urb(sc->urb_int);
+err1:
+ kfree(intr);
+err:
+ usb_free_urb(sc->urb_int);
+ uea_leaves(INS_TO_USBDEV(sc));
+ return -ENOMEM;
+}
+
+/*
+ * Stop the modem : kill kernel thread and free data
+ */
+static void uea_stop(struct uea_softc *sc)
+{
+ int ret;
+ uea_enters(INS_TO_USBDEV(sc));
+ ret = kthread_stop(sc->kthread);
+ uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+
+ /* stop any pending boot process */
+ flush_scheduled_work();
+
+ uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
+
+ usb_kill_urb(sc->urb_int);
+ kfree(sc->urb_int->transfer_buffer);
+ usb_free_urb(sc->urb_int);
+
+ if (sc->dsp_firm)
+ release_firmware(sc->dsp_firm);
+ uea_leaves(INS_TO_USBDEV(sc));
+}
+
+/* syfs interface */
+static struct uea_softc *dev_to_uea(struct device *dev)
+{
+ struct usb_interface *intf;
+ struct usbatm_data *usbatm;
+
+ intf = to_usb_interface(dev);
+ if (!intf)
+ return NULL;
+
+ usbatm = usb_get_intfdata(intf);
+ if (!usbatm)
+ return NULL;
+
+ return usbatm->driver_data;
+}
+
+static ssize_t read_status(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret = -ENODEV;
+ struct uea_softc *sc;
+
+ down(&uea_semaphore);
+ sc = dev_to_uea(dev);
+ if (!sc)
+ goto out;
+ ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
+out:
+ up(&uea_semaphore);
+ return ret;
+}
+
+static ssize_t reboot(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret = -ENODEV;
+ struct uea_softc *sc;
+
+ down(&uea_semaphore);
+ sc = dev_to_uea(dev);
+ if (!sc)
+ goto out;
+ sc->reset = 1;
+ ret = count;
+out:
+ up(&uea_semaphore);
+ return ret;
+}
+
+static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+
+static ssize_t read_human_status(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret = -ENODEV;
+ struct uea_softc *sc;
+
+ down(&uea_semaphore);
+ sc = dev_to_uea(dev);
+ if (!sc)
+ goto out;
+
+ switch (GET_STATUS(sc->stats.phy.state)) {
+ case 0:
+ ret = sprintf(buf, "Modem is booting\n");
+ break;
+ case 1:
+ ret = sprintf(buf, "Modem is initializing\n");
+ break;
+ case 2:
+ ret = sprintf(buf, "Modem is operational\n");
+ break;
+ default:
+ ret = sprintf(buf, "Modem synchronization failed\n");
+ break;
+ }
+out:
+ up(&uea_semaphore);
+ return ret;
+}
+
+static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL);
+
+static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret = -ENODEV;
+ struct uea_softc *sc;
+
+ down(&uea_semaphore);
+ sc = dev_to_uea(dev);
+ if (!sc)
+ goto out;
+
+ if (sc->stats.phy.flags & 0x0C00)
+ ret = sprintf(buf, "ERROR\n");
+ else if (sc->stats.phy.flags & 0x0030)
+ ret = sprintf(buf, "LOSS\n");
+ else
+ ret = sprintf(buf, "GOOD\n");
+out:
+ up(&uea_semaphore);
+ return ret;
+}
+
+static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+
+#define UEA_ATTR(name, reset) \
+ \
+static ssize_t read_##name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ int ret = -ENODEV; \
+ struct uea_softc *sc; \
+ \
+ down(&uea_semaphore); \
+ sc = dev_to_uea(dev); \
+ if (!sc) \
+ goto out; \
+ ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name); \
+ if (reset) \
+ sc->stats.phy.name = 0; \
+out: \
+ up(&uea_semaphore); \
+ return ret; \
+} \
+ \
+static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)
+
+UEA_ATTR(mflags, 1);
+UEA_ATTR(vidcpe, 0);
+UEA_ATTR(usrate, 0);
+UEA_ATTR(dsrate, 0);
+UEA_ATTR(usattenuation, 0);
+UEA_ATTR(dsattenuation, 0);
+UEA_ATTR(usmargin, 0);
+UEA_ATTR(dsmargin, 0);
+UEA_ATTR(txflow, 0);
+UEA_ATTR(rxflow, 0);
+UEA_ATTR(uscorr, 0);
+UEA_ATTR(dscorr, 0);
+UEA_ATTR(usunc, 0);
+UEA_ATTR(dsunc, 0);
+
+/* Retrieve the device End System Identifier (MAC) */
+
+#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10)
+static int uea_getesi(struct uea_softc *sc, u_char * esi)
+{
+ unsigned char mac_str[2 * ETH_ALEN + 1];
+ int i;
+ if (usb_string
+ (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
+ sizeof(mac_str)) != 2 * ETH_ALEN)
+ return 1;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]);
+
+ return 0;
+}
+
+/* ATM stuff */
+static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
+{
+ struct uea_softc *sc = usbatm->driver_data;
+
+ return uea_getesi(sc, atm_dev->esi);
+}
+
+static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+ struct uea_softc *sc = usbatm->driver_data;
+
+ wait_event(sc->sync_q, IS_OPERATIONAL(sc));
+
+ return 0;
+
+}
+
+static int claim_interface(struct usb_device *usb_dev,
+ struct usbatm_data *usbatm, int ifnum)
+{
+ int ret;
+ struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);
+
+ if (!intf) {
+ uea_err(usb_dev, "interface %d not found\n", ifnum);
+ return -ENODEV;
+ }
+
+ ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
+ if (ret != 0)
+ uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
+ ret);
+ return ret;
+}
+
+static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+{
+ /* sysfs interface */
+ device_create_file(&intf->dev, &dev_attr_stat_status);
+ device_create_file(&intf->dev, &dev_attr_stat_mflags);
+ device_create_file(&intf->dev, &dev_attr_stat_human_status);
+ device_create_file(&intf->dev, &dev_attr_stat_delin);
+ device_create_file(&intf->dev, &dev_attr_stat_vidcpe);
+ device_create_file(&intf->dev, &dev_attr_stat_usrate);
+ device_create_file(&intf->dev, &dev_attr_stat_dsrate);
+ device_create_file(&intf->dev, &dev_attr_stat_usattenuation);
+ device_create_file(&intf->dev, &dev_attr_stat_dsattenuation);
+ device_create_file(&intf->dev, &dev_attr_stat_usmargin);
+ device_create_file(&intf->dev, &dev_attr_stat_dsmargin);
+ device_create_file(&intf->dev, &dev_attr_stat_txflow);
+ device_create_file(&intf->dev, &dev_attr_stat_rxflow);
+ device_create_file(&intf->dev, &dev_attr_stat_uscorr);
+ device_create_file(&intf->dev, &dev_attr_stat_dscorr);
+ device_create_file(&intf->dev, &dev_attr_stat_usunc);
+ device_create_file(&intf->dev, &dev_attr_stat_dsunc);
+}
+
+static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
+ const struct usb_device_id *id, int *heavy)
+{
+ struct usb_device *usb = interface_to_usbdev(intf);
+ struct uea_softc *sc;
+ int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
+
+ uea_enters(usb);
+
+ /* interface 0 is for firmware/monitoring */
+ if (ifnum != UEA_INTR_IFACE_NO)
+ return -ENODEV;
+
+ *heavy = sync_wait[modem_index];
+
+ /* interface 1 is for outbound traffic */
+ ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
+ if (ret < 0)
+ return ret;
+
+ /* ADI930 has only 2 interfaces and inbound traffic
+ * is on interface 1
+ */
+ if (UEA_CHIP_VERSION(id) != ADI930) {
+ /* interface 2 is for inbound traffic */
+ ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
+ if (ret < 0)
+ return ret;
+ }
+
+ sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
+ if (!sc) {
+ uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n");
+ return -ENOMEM;
+ }
+
+ sc->usb_dev = usb;
+ usbatm->driver_data = sc;
+ sc->usbatm = usbatm;
+ sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
+ sc->driver_info = id->driver_info;
+
+ ret = uea_boot(sc);
+ if (ret < 0) {
+ kfree(sc);
+ return ret;
+ }
+
+ create_fs_entries(sc, intf);
+ return 0;
+}
+
+static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+{
+ /* sysfs interface */
+ device_remove_file(&intf->dev, &dev_attr_stat_status);
+ device_remove_file(&intf->dev, &dev_attr_stat_mflags);
+ device_remove_file(&intf->dev, &dev_attr_stat_human_status);
+ device_remove_file(&intf->dev, &dev_attr_stat_delin);
+ device_remove_file(&intf->dev, &dev_attr_stat_vidcpe);
+ device_remove_file(&intf->dev, &dev_attr_stat_usrate);
+ device_remove_file(&intf->dev, &dev_attr_stat_dsrate);
+ device_remove_file(&intf->dev, &dev_attr_stat_usattenuation);
+ device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation);
+ device_remove_file(&intf->dev, &dev_attr_stat_usmargin);
+ device_remove_file(&intf->dev, &dev_attr_stat_dsmargin);
+ device_remove_file(&intf->dev, &dev_attr_stat_txflow);
+ device_remove_file(&intf->dev, &dev_attr_stat_rxflow);
+ device_remove_file(&intf->dev, &dev_attr_stat_uscorr);
+ device_remove_file(&intf->dev, &dev_attr_stat_dscorr);
+ device_remove_file(&intf->dev, &dev_attr_stat_usunc);
+ device_remove_file(&intf->dev, &dev_attr_stat_dsunc);
+}
+
+static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
+{
+ struct uea_softc *sc = usbatm->driver_data;
+
+ destroy_fs_entries(sc, intf);
+ uea_stop(sc);
+ kfree(sc);
+}
+
+static struct usbatm_driver uea_usbatm_driver = {
+ .driver_name = "ueagle-atm",
+ .owner = THIS_MODULE,
+ .bind = uea_bind,
+ .atm_start = uea_atm_open,
+ .unbind = uea_unbind,
+ .heavy_init = uea_heavy,
+ .in = UEA_BULK_DATA_PIPE,
+ .out = UEA_BULK_DATA_PIPE,
+};
+
+static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *usb = interface_to_usbdev(intf);
+
+ uea_enters(usb);
+ uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s\n",
+ le16_to_cpu(usb->descriptor.idVendor),
+ le16_to_cpu(usb->descriptor.idProduct),
+ chip_name[UEA_CHIP_VERSION(id)]);
+
+ usb_reset_device(usb);
+
+ if (UEA_IS_PREFIRM(id))
+ return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
+
+ return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+}
+
+static void uea_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *usb = interface_to_usbdev(intf);
+ int ifnum = intf->altsetting->desc.bInterfaceNumber;
+ uea_enters(usb);
+
+ /* ADI930 has 2 interfaces and eagle 3 interfaces.
+ * Pre-firmware device has one interface
+ */
+ if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
+ down(&uea_semaphore);
+ usbatm_usb_disconnect(intf);
+ up(&uea_semaphore);
+ uea_info(usb, "ADSL device removed\n");
+ }
+
+ uea_leaves(usb);
+}
+
+/*
+ * List of supported VID/PID
+ */
+static const struct usb_device_id uea_ids[] = {
+ {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
+ {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
+ {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM},
+ {}
+};
+
+/*
+ * USB driver descriptor
+ */
+static struct usb_driver uea_driver = {
+ .name = "ueagle-atm",
+ .id_table = uea_ids,
+ .probe = uea_probe,
+ .disconnect = uea_disconnect,
+};
+
+MODULE_DEVICE_TABLE(usb, uea_ids);
+
+/**
+ * uea_init - Initialize the module.
+ * Register to USB subsystem
+ */
+static int __init uea_init(void)
+{
+ printk(KERN_INFO "[ueagle-atm] driver " EAGLEUSBVERSION " loaded\n");
+
+ usb_register(&uea_driver);
+
+ return 0;
+}
+
+module_init(uea_init);
+
+/**
+ * uea_exit - Destroy module
+ * Deregister with USB subsystem
+ */
+static void __exit uea_exit(void)
+{
+ /*
+ * This calls automatically the uea_disconnect method if necessary:
+ */
+ usb_deregister(&uea_driver);
+
+ printk(KERN_INFO "[ueagle-atm] driver unloaded\n");
+}
+
+module_exit(uea_exit);
+
+MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
+MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 2e6593e6c1bd..9baa6296fc95 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -646,14 +646,14 @@ static void usbatm_destroy_instance(struct kref *kref)
kfree(instance);
}
-void usbatm_get_instance(struct usbatm_data *instance)
+static void usbatm_get_instance(struct usbatm_data *instance)
{
dbg("%s", __func__);
kref_get(&instance->refcount);
}
-void usbatm_put_instance(struct usbatm_data *instance)
+static void usbatm_put_instance(struct usbatm_data *instance)
{
dbg("%s", __func__);
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 7fe7fb484d10..5c76e3aaaa5e 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -140,7 +140,6 @@ static int xusbatm_usb_probe(struct usb_interface *intf,
}
static struct usb_driver xusbatm_usb_driver = {
- .owner = THIS_MODULE,
.name = xusbatm_driver_name,
.probe = xusbatm_usb_probe,
.disconnect = usbatm_usb_disconnect,