diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/serial/Kconfig | 84 | ||||
| -rw-r--r-- | drivers/usb/serial/Makefile | 9 | ||||
| -rw-r--r-- | drivers/usb/serial/flashloader.c | 39 | ||||
| -rw-r--r-- | drivers/usb/serial/funsoft.c | 40 | ||||
| -rw-r--r-- | drivers/usb/serial/hp4x.c | 51 | ||||
| -rw-r--r-- | drivers/usb/serial/moto_modem.c | 48 | ||||
| -rw-r--r-- | drivers/usb/serial/siemens_mpi.c | 47 | ||||
| -rw-r--r-- | drivers/usb/serial/suunto.c | 41 | ||||
| -rw-r--r-- | drivers/usb/serial/usb-serial-simple.c | 110 | ||||
| -rw-r--r-- | drivers/usb/serial/vivopay-serial.c | 43 | ||||
| -rw-r--r-- | drivers/usb/serial/zio.c | 39 |
11 files changed, 129 insertions, 422 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 7eef9b33fde6..c454bfa22a10 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -51,6 +51,24 @@ config USB_SERIAL_GENERIC support" be compiled as a module for this driver to be used properly. +config USB_SERIAL_SIMPLE + tristate "USB Serial Simple Driver" + help + Say Y here to use the USB serial "simple" driver. This driver + handles a wide range of very simple devices, all in one + driver. Specifically, it supports: + - Suunto ANT+ USB device. + - Fundamental Software dongle. + - HP4x calculators + - a number of Motoroloa phones + - Siemens USB/MPI adapter. + - ViVOtech ViVOpay USB device. + - Infineon Modem Flashloader USB interface + - ZIO Motherboard USB serial interface + + To compile this driver as a module, choose M here: the module + will be called usb-serial-simple. + config USB_SERIAL_AIRCABLE tristate "USB AIRcable Bluetooth Dongle Driver" help @@ -158,14 +176,6 @@ config USB_SERIAL_FTDI_SIO To compile this driver as a module, choose M here: the module will be called ftdi_sio. -config USB_SERIAL_FUNSOFT - tristate "USB Fundamental Software Dongle Driver" - ---help--- - Say Y here if you want to use the Fundamental Software dongle. - - To compile this driver as a module, choose M here: the - module will be called funsoft. - config USB_SERIAL_VISOR tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" help @@ -462,15 +472,6 @@ config USB_SERIAL_MOS7840 To compile this driver as a module, choose M here: the module will be called mos7840. If unsure, choose N. -config USB_SERIAL_MOTOROLA - tristate "USB Motorola Phone modem driver" - ---help--- - Say Y here if you want to use a Motorola phone with a USB - connector as a modem link. - - To compile this driver as a module, choose M here: the - module will be called moto_modem. If unsure, choose N. - config USB_SERIAL_NAVMAN tristate "USB Navman GPS device" help @@ -525,14 +526,6 @@ config USB_SERIAL_SPCP8X5 To compile this driver as a module, choose M here: the module will be called spcp8x5. -config USB_SERIAL_HP4X - tristate "USB HP4x Calculators support" - help - Say Y here if you want to use an Hewlett-Packard 4x Calculator. - - To compile this driver as a module, choose M here: the - module will be called hp4x. - config USB_SERIAL_SAFE tristate "USB Safe Serial (Encapsulated) Driver" @@ -540,14 +533,6 @@ config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" depends on USB_SERIAL_SAFE -config USB_SERIAL_SIEMENS_MPI - tristate "USB Siemens MPI driver" - help - Say M here if you want to use a Siemens USB/MPI adapter. - - To compile this driver as a module, choose M here: the - module will be called siemens_mpi. - config USB_SERIAL_SIERRAWIRELESS tristate "USB Sierra Wireless Driver" help @@ -639,14 +624,6 @@ config USB_SERIAL_OPTICON To compile this driver as a module, choose M here: the module will be called opticon. -config USB_SERIAL_VIVOPAY_SERIAL - tristate "USB ViVOpay serial interface driver" - help - Say Y here if you want to use a ViVOtech ViVOpay USB device. - - To compile this driver as a module, choose M here: the - module will be called vivopay-serial. - config USB_SERIAL_XSENS_MT tristate "Xsens motion tracker serial interface driver" help @@ -659,14 +636,6 @@ config USB_SERIAL_XSENS_MT To compile this driver as a module, choose M here: the module will be called xsens_mt. -config USB_SERIAL_ZIO - tristate "ZIO Motherboard USB serial interface driver" - help - Say Y here if you want to use ZIO Motherboard. - - To compile this driver as a module, choose M here: the - module will be called zio. - config USB_SERIAL_WISHBONE tristate "USB-Wishbone adapter interface driver" help @@ -710,23 +679,6 @@ config USB_SERIAL_QT2 To compile this driver as a module, choose M here: the module will be called quatech-serial. -config USB_SERIAL_FLASHLOADER - tristate "Infineon Modem Flashloader USB interface driver" - help - Say Y here if you want to download Infineon Modem - via USB Flashloader serial driver. - - To compile this driver as a module, choose M here: the - module will be called flashloader. - -config USB_SERIAL_SUUNTO - tristate "USB Suunto ANT+ driver" - help - Say Y here if you want to use the Suunto ANT+ USB device. - - To compile this driver as a module, choose M here: the - module will be called suunto. - config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index a14a870d993f..42670f0b5bc0 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -24,9 +24,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o -obj-$(CONFIG_USB_SERIAL_FUNSOFT) += funsoft.o obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o -obj-$(CONFIG_USB_SERIAL_HP4X) += hp4x.o obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o @@ -39,7 +37,6 @@ obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o -obj-$(CONFIG_USB_SERIAL_MOTOROLA) += moto_modem.o obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o @@ -50,11 +47,10 @@ obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_QT2) += quatech2.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o -obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o +obj-$(CONFIG_USB_SERIAL_SIMPLE) += usb-serial-simple.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o -obj-$(CONFIG_USB_SERIAL_SUUNTO) += suunto.o obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o @@ -62,8 +58,5 @@ obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o -obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o -obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o -obj-$(CONFIG_USB_SERIAL_FLASHLOADER) += flashloader.o diff --git a/drivers/usb/serial/flashloader.c b/drivers/usb/serial/flashloader.c deleted file mode 100644 index e6f5c10e891c..000000000000 --- a/drivers/usb/serial/flashloader.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Infineon Flashloader driver - * - * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> -#include <linux/uaccess.h> - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x8087, 0x0716) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver flashloader_device = { - .driver = { - .owner = THIS_MODULE, - .name = "flashloader", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &flashloader_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c deleted file mode 100644 index 9362f8fd2385..000000000000 --- a/drivers/usb/serial/funsoft.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Funsoft Serial USB driver - * - * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> -#include <linux/uaccess.h> - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x1404, 0xcddc) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver funsoft_device = { - .driver = { - .owner = THIS_MODULE, - .name = "funsoft", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &funsoft_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c deleted file mode 100644 index 2cba60d90c79..000000000000 --- a/drivers/usb/serial/hp4x.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * HP4x Calculators Serial USB driver - * - * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net) - * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * See Documentation/usb/usb-serial.txt for more information on using this - * driver - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -#define DRIVER_DESC "HP4x (48/49) Generic Serial driver" - -#define HP_VENDOR_ID 0x03f0 -#define HP49GP_PRODUCT_ID 0x0121 - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver hp49gp_device = { - .driver = { - .owner = THIS_MODULE, - .name = "hp4X", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &hp49gp_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c deleted file mode 100644 index c5ff6c7795a6..000000000000 --- a/drivers/usb/serial/moto_modem.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Motorola USB Phone driver - * - * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * {sigh} - * Motorola should be using the CDC ACM USB spec, but instead - * they try to just "do their own thing"... This driver should handle a - * few phones in which a basic "dumb serial connection" is needed to be - * able to get a connection through to them. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ - { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ - { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ - { USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ - { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */ - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver moto_device = { - .driver = { - .owner = THIS_MODULE, - .name = "moto-modem", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &moto_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c deleted file mode 100644 index a76b1ae54a2a..000000000000 --- a/drivers/usb/serial/siemens_mpi.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Siemens USB-MPI Serial USB driver - * - * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de> - * Copyright (C) 2005,2008 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -#define DRIVER_AUTHOR "Thomas Hergenhahn@web.de http://libnodave.sf.net" -#define DRIVER_DESC "Driver for Siemens USB/MPI adapter" - - -static const struct usb_device_id id_table[] = { - /* Vendor and product id for 6ES7-972-0CB20-0XA0 */ - { USB_DEVICE(0x908, 0x0004) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver siemens_usb_mpi_device = { - .driver = { - .owner = THIS_MODULE, - .name = "siemens_mpi", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &siemens_usb_mpi_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/suunto.c b/drivers/usb/serial/suunto.c deleted file mode 100644 index 2248e7a7d5ad..000000000000 --- a/drivers/usb/serial/suunto.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Suunto ANT+ USB Driver - * - * Copyright (C) 2013 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - * Copyright (C) 2013 Linux Foundation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation only. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> -#include <linux/uaccess.h> - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x0fcf, 0x1008) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver suunto_device = { - .driver = { - .owner = THIS_MODULE, - .name = KBUILD_MODNAME, - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &suunto_device, - NULL, -}; - -module_usb_serial_driver(serial_drivers, id_table); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c new file mode 100644 index 000000000000..6a06131f48f4 --- /dev/null +++ b/drivers/usb/serial/usb-serial-simple.c @@ -0,0 +1,110 @@ +/* + * USB Serial "Simple" driver + * + * Copyright (C) 2001-2006,2008,2013 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net) + * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de> + * Copyright (C) 2009 Outpost Embedded, LLC + * Copyright (C) 2010 Zilogic Systems <code@zilogic.com> + * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com> + * Copyright (C) 2013 Linux Foundation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define DEVICE(vendor, IDS) \ +static const struct usb_device_id vendor##_id_table[] = { \ + IDS(), \ + { }, \ +}; \ +static struct usb_serial_driver vendor##_device = { \ + .driver = { \ + .owner = THIS_MODULE, \ + .name = "stringify(vendor)", \ + }, \ + .id_table = vendor##_id_table, \ + .num_ports = 1, \ +}; + + +/* ZIO Motherboard USB driver */ +#define ZIO_IDS() \ + { USB_DEVICE(0x1CBE, 0x0103) } +DEVICE(zio, ZIO_IDS); + +/* Funsoft Serial USB driver */ +#define FUNSOFT_IDS() \ + { USB_DEVICE(0x1404, 0xcddc) } +DEVICE(funsoft, FUNSOFT_IDS); + +/* Infineon Flashloader driver */ +#define FLASHLOADER_IDS() \ + { USB_DEVICE(0x8087, 0x0716) } +DEVICE(flashloader, FLASHLOADER_IDS); + +/* ViVOpay USB Serial Driver */ +#define VIVOPAY_IDS() \ + { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ +DEVICE(vivopay, VIVOPAY_IDS); + +/* Motorola USB Phone driver */ +#define MOTO_IDS() \ + { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \ + { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ \ + { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ \ + { USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ \ + { USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */ +DEVICE(moto_modem, MOTO_IDS); + +/* HP4x (48/49) Generic Serial driver */ +#define HP4X_IDS() \ + { USB_DEVICE(0x03f0, 0x0121) } +DEVICE(hp4x, HP4X_IDS); + +/* Suunto ANT+ USB Driver */ +#define SUUNTO_IDS() \ + { USB_DEVICE(0x0fcf, 0x1008) } +DEVICE(suunto, SUUNTO_IDS); + +/* Siemens USB/MPI adapter */ +#define SIEMENS_IDS() \ + { USB_DEVICE(0x908, 0x0004) } +DEVICE(siemens_mpi, SIEMENS_IDS); + +/* All of the above structures mushed into two lists */ +static struct usb_serial_driver * const serial_drivers[] = { + &zio_device, + &funsoft_device, + &flashloader_device, + &vivopay_device, + &moto_modem_device, + &hp4x_device, + &suunto_device, + &siemens_mpi_device, + NULL +}; + +static const struct usb_device_id id_table[] = { + ZIO_IDS(), + FUNSOFT_IDS(), + FLASHLOADER_IDS(), + VIVOPAY_IDS(), + MOTO_IDS(), + HP4X_IDS(), + SUUNTO_IDS(), + SIEMENS_IDS(), + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c deleted file mode 100644 index 6299526ff8c3..000000000000 --- a/drivers/usb/serial/vivopay-serial.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2009 Outpost Embedded, LLC - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -#define DRIVER_DESC "ViVOpay USB Serial Driver" - -#define VIVOPAY_VENDOR_ID 0x1d5f - - -static struct usb_device_id id_table [] = { - /* ViVOpay 8800 */ - { USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) }, - { }, -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver vivopay_serial_device = { - .driver = { - .owner = THIS_MODULE, - .name = "vivopay-serial", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &vivopay_serial_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); - -MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>"); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c deleted file mode 100644 index c043aa84a0ba..000000000000 --- a/drivers/usb/serial/zio.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * ZIO Motherboard USB driver - * - * Copyright (C) 2010 Zilogic Systems <code@zilogic.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> -#include <linux/uaccess.h> - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x1CBE, 0x0103) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver zio_device = { - .driver = { - .owner = THIS_MODULE, - .name = "zio", - }, - .id_table = id_table, - .num_ports = 1, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &zio_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); -MODULE_LICENSE("GPL"); |