summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/Kconfig13
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-xilinx.c26
-rw-r--r--drivers/spi/spi-xtensa-xtfpga.c170
4 files changed, 190 insertions, 20 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 756b5b3ca200..efe1960af2b3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -538,6 +538,19 @@ config SPI_XILINX
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
+config SPI_XTENSA_XTFPGA
+ tristate "Xtensa SPI controller for xtfpga"
+ depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST
+ select SPI_BITBANG
+ help
+ SPI driver for xtfpga SPI master controller.
+
+ This simple SPI master controller is built into xtfpga bitstreams
+ and is used to control daughterboard audio codec. It always transfers
+ 16 bit words in SPI mode 0, automatically asserting CS on transfer
+ start and deasserting on end.
+
+
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e245b94d07d8..bd792669e563 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
+obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index e6cd1112ae40..a3b0b9944bf0 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -87,10 +87,10 @@ struct xilinx_spi {
const u8 *tx_ptr; /* pointer in the Rx buffer */
int remaining_bytes; /* the number of bytes left to transfer */
u8 bits_per_word;
- unsigned int (*read_fn) (void __iomem *);
- void (*write_fn) (u32, void __iomem *);
- void (*tx_fn) (struct xilinx_spi *);
- void (*rx_fn) (struct xilinx_spi *);
+ unsigned int (*read_fn)(void __iomem *);
+ void (*write_fn)(u32, void __iomem *);
+ void (*tx_fn)(struct xilinx_spi *);
+ void (*rx_fn)(struct xilinx_spi *);
};
static void xspi_write32(u32 val, void __iomem *addr)
@@ -208,26 +208,11 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
}
/* spi_bitbang requires custom setup_transfer() to be defined if there is a
- * custom txrx_bufs(). We have nothing to setup here as the SPI IP block
- * supports 8 or 16 bits per word which cannot be changed in software.
- * SPI clock can't be changed in software either.
- * Check for correct bits per word. Chip select delay calculations could be
- * added here as soon as bitbang_work() can be made aware of the delay value.
+ * custom txrx_bufs().
*/
static int xilinx_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
- struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
- u8 bits_per_word;
-
- bits_per_word = (t && t->bits_per_word)
- ? t->bits_per_word : spi->bits_per_word;
- if (bits_per_word != xspi->bits_per_word) {
- dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
- __func__, bits_per_word);
- return -EINVAL;
- }
-
return 0;
}
@@ -406,6 +391,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
xspi->write_fn = xspi_write32_be;
}
+ master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
xspi->bits_per_word = bits_per_word;
if (xspi->bits_per_word == 8) {
xspi->tx_fn = xspi_tx8;
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
new file mode 100644
index 000000000000..41e158187f9d
--- /dev/null
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -0,0 +1,170 @@
+/*
+ * Xtensa xtfpga SPI controller driver
+ *
+ * Copyright (c) 2014 Cadence Design Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#define XTFPGA_SPI_NAME "xtfpga_spi"
+
+#define XTFPGA_SPI_START 0x0
+#define XTFPGA_SPI_BUSY 0x4
+#define XTFPGA_SPI_DATA 0x8
+
+#define BUSY_WAIT_US 100
+
+struct xtfpga_spi {
+ struct spi_bitbang bitbang;
+ void __iomem *regs;
+ u32 data;
+ unsigned data_sz;
+};
+
+static inline void xtfpga_spi_write32(const struct xtfpga_spi *spi,
+ unsigned addr, u32 val)
+{
+ iowrite32(val, spi->regs + addr);
+}
+
+static inline unsigned int xtfpga_spi_read32(const struct xtfpga_spi *spi,
+ unsigned addr)
+{
+ return ioread32(spi->regs + addr);
+}
+
+static inline void xtfpga_spi_wait_busy(struct xtfpga_spi *xspi)
+{
+ unsigned i;
+ for (i = 0; xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY) &&
+ i < BUSY_WAIT_US; ++i)
+ udelay(1);
+ WARN_ON_ONCE(i == BUSY_WAIT_US);
+}
+
+static u32 xtfpga_spi_txrx_word(struct spi_device *spi, unsigned nsecs,
+ u32 v, u8 bits)
+{
+ struct xtfpga_spi *xspi = spi_master_get_devdata(spi->master);
+
+ xspi->data = (xspi->data << bits) | (v & GENMASK(bits - 1, 0));
+ xspi->data_sz += bits;
+ if (xspi->data_sz >= 16) {
+ xtfpga_spi_write32(xspi, XTFPGA_SPI_DATA,
+ xspi->data >> (xspi->data_sz - 16));
+ xspi->data_sz -= 16;
+ xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 1);
+ xtfpga_spi_wait_busy(xspi);
+ xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 0);
+ }
+
+ return 0;
+}
+
+static void xtfpga_spi_chipselect(struct spi_device *spi, int is_on)
+{
+ struct xtfpga_spi *xspi = spi_master_get_devdata(spi->master);
+
+ WARN_ON(xspi->data_sz != 0);
+ xspi->data_sz = 0;
+}
+
+static int xtfpga_spi_probe(struct platform_device *pdev)
+{
+ struct xtfpga_spi *xspi;
+ struct resource *mem;
+ int ret;
+ struct spi_master *master;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct xtfpga_spi));
+ if (!master)
+ return -ENOMEM;
+
+ master->flags = SPI_MASTER_NO_RX;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
+ master->bus_num = pdev->dev.id;
+ master->dev.of_node = pdev->dev.of_node;
+
+ xspi = spi_master_get_devdata(master);
+ xspi->bitbang.master = master;
+ xspi->bitbang.chipselect = xtfpga_spi_chipselect;
+ xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "No memory resource\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ xspi->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(xspi->regs)) {
+ ret = PTR_ERR(xspi->regs);
+ goto err;
+ }
+
+ xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 0);
+ usleep_range(1000, 2000);
+ if (xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY)) {
+ dev_err(&pdev->dev, "Device stuck in busy state\n");
+ ret = -EBUSY;
+ goto err;
+ }
+
+ ret = spi_bitbang_start(&xspi->bitbang);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "spi_bitbang_start failed\n");
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, master);
+ return 0;
+err:
+ spi_master_put(master);
+ return ret;
+}
+
+static int xtfpga_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct xtfpga_spi *xspi = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&xspi->bitbang);
+ spi_master_put(master);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:" XTFPGA_SPI_NAME);
+
+#ifdef CONFIG_OF
+static const struct of_device_id xtfpga_spi_of_match[] = {
+ { .compatible = "cdns,xtfpga-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, xtfpga_spi_of_match);
+#endif
+
+static struct platform_driver xtfpga_spi_driver = {
+ .probe = xtfpga_spi_probe,
+ .remove = xtfpga_spi_remove,
+ .driver = {
+ .name = XTFPGA_SPI_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(xtfpga_spi_of_match),
+ },
+};
+module_platform_driver(xtfpga_spi_driver);
+
+MODULE_AUTHOR("Max Filippov <jcmvbkbc@gmail.com>");
+MODULE_DESCRIPTION("xtensa xtfpga SPI driver");
+MODULE_LICENSE("GPL");