summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/firewire/Kconfig50
-rw-r--r--drivers/firewire/fw-ohci.c108
-rw-r--r--drivers/firewire/fw-sbp2.c36
-rw-r--r--drivers/firewire/fw-topology.c3
-rw-r--r--drivers/firewire/fw-transaction.c2
-rw-r--r--drivers/firewire/fw-transaction.h6
-rw-r--r--drivers/ieee1394/sbp2.c5
7 files changed, 143 insertions, 67 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fe9e768cfbc4..25bdc2dd9ce1 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,5 +1,3 @@
-# -*- shell-script -*-
-
comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
depends on EXPERIMENTAL=n
@@ -21,27 +19,7 @@ config FIREWIRE
NOTE:
You should only build ONE of the stacks, unless you REALLY know what
- you are doing. If you install both, you should configure them only as
- modules rather than link them statically, and you should blacklist one
- of the concurrent low-level drivers in /etc/modprobe.conf. Add either
-
- blacklist firewire-ohci
- or
- blacklist ohci1394
-
- there depending on which driver you DON'T want to have auto-loaded.
- You can optionally do the same with the other IEEE 1394/ FireWire
- drivers.
-
- If you have an old modprobe which doesn't implement the blacklist
- directive, use either
-
- install firewire-ohci /bin/true
- or
- install ohci1394 /bin/true
-
- and so on, depending on which modules you DON't want to have
- auto-loaded.
+ you are doing.
config FIREWIRE_OHCI
tristate "Support for OHCI FireWire host controllers"
@@ -57,8 +35,24 @@ config FIREWIRE_OHCI
NOTE:
- If you also build ohci1394 of the classic stack, blacklist either
- ohci1394 or firewire-ohci to let hotplug load only the desired driver.
+ You should only build ohci1394 or firewire-ohci, but not both.
+ If you nevertheless want to install both, you should configure them
+ only as modules and blacklist the driver(s) which you don't want to
+ have auto-loaded. Add either
+
+ blacklist firewire-ohci
+ or
+ blacklist ohci1394
+ blacklist video1394
+ blacklist dv1394
+
+ to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+ depending on your distribution. The latter two modules should be
+ blacklisted together with ohci1394 because they depend on ohci1394.
+
+ If you have an old modprobe which doesn't implement the blacklist
+ directive, use "install modulename /bin/true" for the modules to be
+ blacklisted.
config FIREWIRE_SBP2
tristate "Support for storage devices (SBP-2 protocol driver)"
@@ -75,9 +69,3 @@ config FIREWIRE_SBP2
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
-
- NOTE:
-
- If you also build sbp2 of the classic stack, blacklist either sbp2
- or firewire-sbp2 to let hotplug load only the desired driver.
-
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 7ebad3c14cb8..996d61f0d460 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -33,6 +33,10 @@
#include <asm/page.h>
#include <asm/system.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/pmac_feature.h>
+#endif
+
#include "fw-ohci.h"
#include "fw-transaction.h"
@@ -175,6 +179,7 @@ struct fw_ohci {
int generation;
int request_generation;
u32 bus_seconds;
+ bool old_uninorth;
/*
* Spinlock for accessing fw_ohci data. Never call out of
@@ -276,19 +281,13 @@ static int ar_context_add_page(struct ar_context *ctx)
{
struct device *dev = ctx->ohci->card.device;
struct ar_buffer *ab;
- dma_addr_t ab_bus;
+ dma_addr_t uninitialized_var(ab_bus);
size_t offset;
- ab = (struct ar_buffer *) __get_free_page(GFP_ATOMIC);
+ ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
if (ab == NULL)
return -ENOMEM;
- ab_bus = dma_map_single(dev, ab, PAGE_SIZE, DMA_BIDIRECTIONAL);
- if (dma_mapping_error(ab_bus)) {
- free_page((unsigned long) ab);
- return -ENOMEM;
- }
-
memset(&ab->descriptor, 0, sizeof(ab->descriptor));
ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
DESCRIPTOR_STATUS |
@@ -299,8 +298,6 @@ static int ar_context_add_page(struct ar_context *ctx)
ab->descriptor.res_count = cpu_to_le16(PAGE_SIZE - offset);
ab->descriptor.branch_address = 0;
- dma_sync_single_for_device(dev, ab_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
-
ctx->last_buffer->descriptor.branch_address = cpu_to_le32(ab_bus | 1);
ctx->last_buffer->next = ab;
ctx->last_buffer = ab;
@@ -311,15 +308,22 @@ static int ar_context_add_page(struct ar_context *ctx)
return 0;
}
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+#define cond_le32_to_cpu(v) \
+ (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v))
+#else
+#define cond_le32_to_cpu(v) le32_to_cpu(v)
+#endif
+
static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
{
struct fw_ohci *ohci = ctx->ohci;
struct fw_packet p;
u32 status, length, tcode;
- p.header[0] = le32_to_cpu(buffer[0]);
- p.header[1] = le32_to_cpu(buffer[1]);
- p.header[2] = le32_to_cpu(buffer[2]);
+ p.header[0] = cond_le32_to_cpu(buffer[0]);
+ p.header[1] = cond_le32_to_cpu(buffer[1]);
+ p.header[2] = cond_le32_to_cpu(buffer[2]);
tcode = (p.header[0] >> 4) & 0x0f;
switch (tcode) {
@@ -331,7 +335,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
break;
case TCODE_READ_BLOCK_REQUEST :
- p.header[3] = le32_to_cpu(buffer[3]);
+ p.header[3] = cond_le32_to_cpu(buffer[3]);
p.header_length = 16;
p.payload_length = 0;
break;
@@ -340,7 +344,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
case TCODE_READ_BLOCK_RESPONSE:
case TCODE_LOCK_REQUEST:
case TCODE_LOCK_RESPONSE:
- p.header[3] = le32_to_cpu(buffer[3]);
+ p.header[3] = cond_le32_to_cpu(buffer[3]);
p.header_length = 16;
p.payload_length = p.header[3] >> 16;
break;
@@ -357,7 +361,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
/* FIXME: What to do about evt_* errors? */
length = (p.header_length + p.payload_length + 3) / 4;
- status = le32_to_cpu(buffer[length]);
+ status = cond_le32_to_cpu(buffer[length]);
p.ack = ((status >> 16) & 0x1f) - 16;
p.speed = (status >> 21) & 0x7;
@@ -375,7 +379,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
*/
if (p.ack + 16 == 0x09)
- ohci->request_generation = (buffer[2] >> 16) & 0xff;
+ ohci->request_generation = (p.header[2] >> 16) & 0xff;
else if (ctx == &ohci->ar_request_ctx)
fw_core_handle_request(&ohci->card, &p);
else
@@ -397,6 +401,7 @@ static void ar_context_tasklet(unsigned long data)
if (d->res_count == 0) {
size_t size, rest, offset;
+ dma_addr_t buffer_bus;
/*
* This descriptor is finished and we may have a
@@ -405,9 +410,7 @@ static void ar_context_tasklet(unsigned long data)
*/
offset = offsetof(struct ar_buffer, data);
- dma_unmap_single(ohci->card.device,
- le32_to_cpu(ab->descriptor.data_address) - offset,
- PAGE_SIZE, DMA_BIDIRECTIONAL);
+ buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
buffer = ab;
ab = ab->next;
@@ -423,7 +426,8 @@ static void ar_context_tasklet(unsigned long data)
while (buffer < end)
buffer = handle_ar_packet(ctx, buffer);
- free_page((unsigned long)buffer);
+ dma_free_coherent(ohci->card.device, PAGE_SIZE,
+ buffer, buffer_bus);
ar_context_add_page(ctx);
} else {
buffer = ctx->pointer;
@@ -532,7 +536,7 @@ static int
context_add_buffer(struct context *ctx)
{
struct descriptor_buffer *desc;
- dma_addr_t bus_addr;
+ dma_addr_t uninitialized_var(bus_addr);
int offset;
/*
@@ -1022,13 +1026,14 @@ static void bus_reset_tasklet(unsigned long data)
*/
self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff;
- generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
+ generation = (cond_le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
rmb();
for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1])
fw_error("inconsistent self IDs\n");
- ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]);
+ ohci->self_id_buffer[j] =
+ cond_le32_to_cpu(ohci->self_id_cpu[i]);
}
rmb();
@@ -1316,7 +1321,7 @@ ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
unsigned long flags;
int retval = -EBUSY;
__be32 *next_config_rom;
- dma_addr_t next_config_rom_bus;
+ dma_addr_t uninitialized_var(next_config_rom_bus);
ohci = fw_ohci(card);
@@ -1487,7 +1492,7 @@ static int handle_ir_dualbuffer_packet(struct context *context,
void *p, *end;
int i;
- if (db->first_res_count > 0 && db->second_res_count > 0) {
+ if (db->first_res_count != 0 && db->second_res_count != 0) {
if (ctx->excess_bytes <= le16_to_cpu(db->second_req_count)) {
/* This descriptor isn't done yet, stop iteration. */
return 0;
@@ -1513,7 +1518,7 @@ static int handle_ir_dualbuffer_packet(struct context *context,
memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4);
i += ctx->base.header_size;
ctx->excess_bytes +=
- (le32_to_cpu(*(u32 *)(p + 4)) >> 16) & 0xffff;
+ (le32_to_cpu(*(__le32 *)(p + 4)) >> 16) & 0xffff;
p += ctx->base.header_size + 4;
}
ctx->header_length = i;
@@ -2048,6 +2053,18 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
int err;
size_t size;
+#ifdef CONFIG_PPC_PMAC
+ /* Necessary on some machines if fw-ohci was loaded/ unloaded before */
+ if (machine_is(powermac)) {
+ struct device_node *ofn = pci_device_to_OF_node(dev);
+
+ if (ofn) {
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+ }
+ }
+#endif /* CONFIG_PPC_PMAC */
+
ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
if (ohci == NULL) {
fw_error("Could not malloc fw_ohci data.\n");
@@ -2066,6 +2083,10 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
pci_set_drvdata(dev, ohci);
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+ ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
+ dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
+#endif
spin_lock_init(&ohci->lock);
tasklet_init(&ohci->bus_reset_tasklet,
@@ -2182,6 +2203,19 @@ static void pci_remove(struct pci_dev *dev)
pci_disable_device(dev);
fw_card_put(&ohci->card);
+#ifdef CONFIG_PPC_PMAC
+ /* On UniNorth, power down the cable and turn off the chip clock
+ * to save power on laptops */
+ if (machine_is(powermac)) {
+ struct device_node *ofn = pci_device_to_OF_node(dev);
+
+ if (ofn) {
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
+ }
+ }
+#endif /* CONFIG_PPC_PMAC */
+
fw_notify("Removed fw-ohci device.\n");
}
@@ -2202,6 +2236,16 @@ static int pci_suspend(struct pci_dev *pdev, pm_message_t state)
if (err)
fw_error("pci_set_power_state failed with %d\n", err);
+/* PowerMac suspend code comes last */
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
+ struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+ if (ofn)
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+ }
+#endif /* CONFIG_PPC_PMAC */
+
return 0;
}
@@ -2210,6 +2254,16 @@ static int pci_resume(struct pci_dev *pdev)
struct fw_ohci *ohci = pci_get_drvdata(pdev);
int err;
+/* PowerMac resume code comes first */
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
+ struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+ if (ofn)
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+ }
+#endif /* CONFIG_PPC_PMAC */
+
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
err = pci_enable_device(pdev);
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 03069a454c07..62b4e47d0cc0 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -173,6 +173,7 @@ struct sbp2_target {
#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
+#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
#define SBP2_DIRECTION_TO_MEDIA 0x0
#define SBP2_DIRECTION_FROM_MEDIA 0x1
@@ -330,6 +331,11 @@ static const struct {
.model = ~0,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
+ /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+ .firmware_revision = 0x002600,
+ .model = ~0,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
/*
* There are iPods (2nd gen, 3rd gen) with model_id == 0, but
@@ -812,6 +818,30 @@ static void sbp2_target_put(struct sbp2_target *tgt)
kref_put(&tgt->kref, sbp2_release_target);
}
+static void
+complete_set_busy_timeout(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *done)
+{
+ complete(done);
+}
+
+static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
+{
+ struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ DECLARE_COMPLETION_ONSTACK(done);
+ struct fw_transaction t;
+ static __be32 busy_timeout;
+
+ /* FIXME: we should try to set dual-phase cycle_limit too */
+ busy_timeout = cpu_to_be32(SBP2_RETRY_LIMIT);
+
+ fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+ lu->tgt->node_id, lu->generation, device->max_speed,
+ CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout,
+ sizeof(busy_timeout), complete_set_busy_timeout, &done);
+ wait_for_completion(&done);
+}
+
static void sbp2_reconnect(struct work_struct *work);
static void sbp2_login(struct work_struct *work)
@@ -864,10 +894,8 @@ static void sbp2_login(struct work_struct *work)
fw_notify("%s: logged in to LUN %04x (%d retries)\n",
tgt->bus_id, lu->lun, lu->retries);
-#if 0
- /* FIXME: The linux1394 sbp2 does this last step. */
- sbp2_set_busy_timeout(scsi_id);
-#endif
+ /* set appropriate retry limit(s) in BUSY_TIMEOUT register */
+ sbp2_set_busy_timeout(lu);
PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
sbp2_agent_reset(lu);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index e47bb040197a..d2c7a3d7e1cb 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/wait.h>
#include <linux/errno.h>
+#include <asm/bug.h>
#include <asm/system.h>
#include "fw-transaction.h"
#include "fw-topology.h"
@@ -424,8 +425,8 @@ update_tree(struct fw_card *card, struct fw_node *root)
node1 = fw_node(list1.next);
while (&node0->link != &list0) {
+ WARN_ON(node0->port_count != node1->port_count);
- /* assert(node0->port_count == node1->port_count); */
if (node0->link_on && !node1->link_on)
event = FW_NODE_LINK_OFF;
else if (!node0->link_on && node1->link_on)
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 7fcc59dedf08..99529e59a0b1 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -751,7 +751,7 @@ handle_topology_map(struct fw_card *card, struct fw_request *request,
void *payload, size_t length, void *callback_data)
{
int i, start, end;
- u32 *map;
+ __be32 *map;
if (!TCODE_IS_READ_REQUEST(tcode)) {
fw_send_response(card, request, RCODE_TYPE_ERROR);
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index 09cb72870454..a43bb22912f9 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -86,12 +86,12 @@
static inline void
fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
{
- u32 *dst = _dst;
- u32 *src = _src;
+ u32 *dst = _dst;
+ __be32 *src = _src;
int i;
for (i = 0; i < size / 4; i++)
- dst[i] = cpu_to_be32(src[i]);
+ dst[i] = be32_to_cpu(src[i]);
}
static inline void
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 9e2b1964d71a..f53f72daae34 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -376,6 +376,11 @@ static const struct {
.model_id = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
+ /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+ .firmware_revision = 0x002600,
+ .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
/* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
.model_id = 0x000021,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 07:07:47 +0000