summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/pty.c2
-rw-r--r--drivers/tty/serial/8250/8250.c11
-rw-r--r--drivers/tty/serial/8250/8250.h1
-rw-r--r--drivers/tty/serial/8250/8250_dw.c2
-rw-r--r--drivers/tty/serial/8250/8250_pci.c42
-rw-r--r--drivers/tty/serial/ifx6x60.c4
-rw-r--r--drivers/tty/serial/mxs-auart.c6
-rw-r--r--drivers/tty/serial/samsung.c1
-rw-r--r--drivers/tty/serial/vt8500_serial.c2
9 files changed, 63 insertions, 8 deletions
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index be6a373601b7..79ff3a5e925d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -441,6 +441,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
return pty_get_pktmode(tty, (int __user *)arg);
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
+ case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */
+ return -EINVAL;
}
return -ENOIOCTLCMD;
}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index d085e3a8ec06..f9320437a649 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = {
UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
.flags = UART_CAP_FIFO,
},
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
[PORT_8250_CIR] = {
.name = "CIR port"
}
@@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up)
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 3b4ea84898c2..12caa1292b75 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -40,6 +40,7 @@ struct serial8250_config {
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 1d0dba2d562d..096d2ef48b32 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p)
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* Clear the USR and write the LCR again. */
(void)p->serial_in(p, UART_USR);
- p->serial_out(p, d->last_lcr, UART_LCR);
+ p->serial_out(p, UART_LCR, d->last_lcr);
return 1;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 26b9dc012ed0..a27a98e1b066 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv,
return setup_port(priv, port, 2, idx * 8, 0);
}
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ int ret = pci_default_setup(priv, board, port, idx);
+
+ port->port.type = PORT_BRCM_TRUMANAGE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1301,9 +1313,10 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
#define PCI_VENDOR_ID_ASIX 0x9710
-#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
@@ -1954,6 +1967,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_xr17v35x_setup,
},
/*
+ * Broadcom TruManage (NetXtreme)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_brcm_trumanage_setup,
+ },
+
+ /*
* Default "match everything" terminator entry
*/
{
@@ -2148,6 +2172,7 @@ enum pci_board_num_t {
pbn_ce4100_1_115200,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
+ pbn_brcm_trumanage,
};
/*
@@ -2246,7 +2271,7 @@ static struct pciserial_board pci_boards[] = {
[pbn_b0_8_1152000_200] = {
.flags = FL_BASE0,
- .num_ports = 2,
+ .num_ports = 8,
.base_baud = 1152000,
.uart_offset = 0x200,
},
@@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = {
.num_ports = 2,
.base_baud = 115200,
},
+ [pbn_brcm_trumanage] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .reg_shift = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -4471,6 +4502,13 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_omegapci },
/*
+ * Broadcom TruManage
+ */
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_brcm_trumanage },
+
+ /*
* AgeStar as-prs2-009
*/
{ PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 675d94ab0aff..8cb6d8d66a13 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port)
clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
mrdy_set_low(ifx_dev);
+ del_timer(&ifx_dev->spi_timer);
clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
tasklet_kill(&ifx_dev->io_work_tasklet);
}
@@ -810,7 +811,8 @@ static void ifx_spi_io(unsigned long data)
ifx_dev->spi_xfer.cs_change = 0;
ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
/* ifx_dev->spi_xfer.speed_hz = 390625; */
- ifx_dev->spi_xfer.bits_per_word = spi_bpw;
+ ifx_dev->spi_xfer.bits_per_word =
+ ifx_dev->spi_dev->bits_per_word;
ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 6db23b035efe..e55615eb34ad 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s)
struct circ_buf *xmit = &s->port.state->xmit;
if (auart_dma_enabled(s)) {
- int i = 0;
+ u32 i = 0;
int size;
void *buffer = s->tx_dma_buf;
@@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
u32 ctrl = readl(u->membase + AUART_CTRL2);
- ctrl &= ~AUART_CTRL2_RTSEN;
+ ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
if (mctrl & TIOCM_RTS) {
if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
+ else
+ ctrl |= AUART_CTRL2_RTS;
}
s->ctrl = mctrl;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 12e5249d053e..e514b3a4dc57 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8fd181436a6b..d5ed9f613005 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (vt8500_port->clk) {
+ if (!IS_ERR(vt8500_port->clk)) {
vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
} else {
/* use the default of 24Mhz if not specified and warn */