summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/phy/micrel.c125
1 files changed, 89 insertions, 36 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index bcc6c0ea75fa..30e894d6ffbd 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -30,30 +30,34 @@
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
-#define KSZPHY_OMSO_B_CAST_OFF (1 << 9)
-#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1)
-#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0)
+#define KSZPHY_OMSO_B_CAST_OFF BIT(9)
+#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE BIT(0)
/* general Interrupt control/status reg in vendor specific block. */
#define MII_KSZPHY_INTCS 0x1B
-#define KSZPHY_INTCS_JABBER (1 << 15)
-#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
-#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
-#define KSZPHY_INTCS_PARELLEL (1 << 12)
-#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
-#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
-#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
-#define KSZPHY_INTCS_LINK_UP (1 << 8)
+#define KSZPHY_INTCS_JABBER BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
+#define KSZPHY_INTCS_PARELLEL BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
+#define KSZPHY_INTCS_LINK_UP BIT(8)
#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
KSZPHY_INTCS_LINK_DOWN)
-/* general PHY control reg in vendor specific block. */
-#define MII_KSZPHY_CTRL 0x1F
+/* PHY Control 1 */
+#define MII_KSZPHY_CTRL_1 0x1e
+
+/* PHY Control 2 / PHY Control (if no PHY Control 1) */
+#define MII_KSZPHY_CTRL_2 0x1f
+#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
/* bitmap of PHY register to set interrupt mode */
-#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
-#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
-#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
-#define KSZ8051_RMII_50MHZ_CLK (1 << 7)
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH BIT(14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH BIT(14)
+#define KSZ8051_RMII_50MHZ_CLK BIT(7)
/* Write/read to/from extended registers */
#define MII_KSZPHY_EXTREG 0x0b
@@ -122,6 +126,8 @@ static int kszphy_config_intr(struct phy_device *phydev)
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (temp < 0)
+ return temp;
temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
@@ -134,6 +140,8 @@ static int ksz9021_config_intr(struct phy_device *phydev)
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (temp < 0)
+ return temp;
temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
@@ -146,19 +154,20 @@ static int ks8737_config_intr(struct phy_device *phydev)
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (temp < 0)
+ return temp;
temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
return rc < 0 ? rc : 0;
}
-static int kszphy_setup_led(struct phy_device *phydev,
- unsigned int reg, unsigned int shift)
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg)
{
struct device *dev = &phydev->dev;
struct device_node *of_node = dev->of_node;
- int rc, temp;
+ int rc, temp, shift;
u32 val;
if (!of_node && dev->parent->of_node)
@@ -167,15 +176,55 @@ static int kszphy_setup_led(struct phy_device *phydev,
if (of_property_read_u32(of_node, "micrel,led-mode", &val))
return 0;
+ if (val > 3) {
+ dev_err(&phydev->dev, "invalid led mode: 0x%02x\n", val);
+ return -EINVAL;
+ }
+
+ switch (reg) {
+ case MII_KSZPHY_CTRL_1:
+ shift = 14;
+ break;
+ case MII_KSZPHY_CTRL_2:
+ shift = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
temp = phy_read(phydev, reg);
- if (temp < 0)
- return temp;
+ if (temp < 0) {
+ rc = temp;
+ goto out;
+ }
temp &= ~(3 << shift);
temp |= val << shift;
rc = phy_write(phydev, reg, temp);
+out:
+ if (rc < 0)
+ dev_err(&phydev->dev, "failed to set led mode\n");
- return rc < 0 ? rc : 0;
+ return rc;
+}
+
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable broadcast address\n");
+
+ return ret;
}
static int kszphy_config_init(struct phy_device *phydev)
@@ -185,23 +234,21 @@ static int kszphy_config_init(struct phy_device *phydev)
static int kszphy_config_init_led8041(struct phy_device *phydev)
{
- /* single led control, register 0x1e bits 15..14 */
- return kszphy_setup_led(phydev, 0x1e, 14);
+ return kszphy_setup_led(phydev, MII_KSZPHY_CTRL_1);
}
static int ksz8021_config_init(struct phy_device *phydev)
{
- const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
int rc;
- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, MII_KSZPHY_CTRL_2);
rc = ksz_config_flags(phydev);
if (rc < 0)
return rc;
- rc = phy_write(phydev, MII_KSZPHY_OMSO, val);
+
+ rc = kszphy_broadcast_disable(phydev);
+
return rc < 0 ? rc : 0;
}
@@ -209,14 +256,20 @@ static int ks8051_config_init(struct phy_device *phydev)
{
int rc;
- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, MII_KSZPHY_CTRL_2);
rc = ksz_config_flags(phydev);
return rc < 0 ? rc : 0;
}
+static int ksz8081_config_init(struct phy_device *phydev)
+{
+ kszphy_broadcast_disable(phydev);
+ kszphy_setup_led(phydev, MII_KSZPHY_CTRL_2);
+
+ return 0;
+}
+
static int ksz9021_load_values_from_of(struct phy_device *phydev,
struct device_node *of_node, u16 reg,
char *field1, char *field2,
@@ -394,8 +447,8 @@ static int ksz9031_config_init(struct phy_device *phydev)
}
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
-#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
-#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
static int ksz8873mll_read_status(struct phy_device *phydev)
{
int regval;
@@ -579,7 +632,7 @@ static struct phy_driver ksphy_driver[] = {
.phy_id_mask = 0x00fffff0,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz8081_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,