diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_attr.c | 50 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 21 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_gbl.h | 9 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 16 | ||||
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 294 |
5 files changed, 387 insertions, 3 deletions
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 5a8d5c4c69ba..049e5cf1af7f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -196,6 +196,9 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha) sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + + if (ha->beacon_blink_led == 1) + ha->isp_ops.beacon_off(ha); } /* Scsi_Host attributes. */ @@ -383,6 +386,50 @@ qla2x00_zio_timer_store(struct class_device *cdev, const char *buf, return strlen(buf); } +static ssize_t +qla2x00_beacon_show(struct class_device *cdev, char *buf) +{ + scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev)); + int len = 0; + + if (ha->beacon_blink_led) + len += snprintf(buf + len, PAGE_SIZE-len, "Enabled\n"); + else + len += snprintf(buf + len, PAGE_SIZE-len, "Disabled\n"); + return len; +} + +static ssize_t +qla2x00_beacon_store(struct class_device *cdev, const char *buf, + size_t count) +{ + scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev)); + int val = 0; + int rval; + + if (IS_QLA2100(ha) || IS_QLA2200(ha)) + return -EPERM; + + if (test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) { + qla_printk(KERN_WARNING, ha, + "Abort ISP active -- ignoring beacon request.\n"); + return -EBUSY; + } + + if (sscanf(buf, "%d", &val) != 1) + return -EINVAL; + + if (val) + rval = ha->isp_ops.beacon_on(ha); + else + rval = ha->isp_ops.beacon_off(ha); + + if (rval != QLA_SUCCESS) + count = 0; + + return count; +} + static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL); static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL); @@ -397,6 +444,8 @@ static CLASS_DEVICE_ATTR(zio, S_IRUGO | S_IWUSR, qla2x00_zio_show, qla2x00_zio_store); static CLASS_DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show, qla2x00_zio_timer_store); +static CLASS_DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show, + qla2x00_beacon_store); struct class_device_attribute *qla2x00_host_attrs[] = { &class_device_attr_driver_version, @@ -410,6 +459,7 @@ struct class_device_attribute *qla2x00_host_attrs[] = { &class_device_attr_state, &class_device_attr_zio, &class_device_attr_zio_timer, + &class_device_attr_beacon, NULL, }; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 414580800dc0..7cb8b5a5e659 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -182,6 +182,13 @@ #define WRT_REG_DWORD(addr, data) writel(data,addr) /* + * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an + * 133Mhz slot. + */ +#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr)) +#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr)) + +/* * Fibre Channel device definitions. */ #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ @@ -433,6 +440,9 @@ struct device_reg_2xxx { #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 #define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080 #define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0 +#define GPIO_LED_ALL_OFF 0x0000 +#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */ +#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */ union { struct { @@ -2200,6 +2210,10 @@ struct isp_operations { void (*fw_dump) (struct scsi_qla_host *, int); void (*ascii_fw_dump) (struct scsi_qla_host *); + + int (*beacon_on) (struct scsi_qla_host *); + int (*beacon_off) (struct scsi_qla_host *); + void (*beacon_blink) (struct scsi_qla_host *); }; /* @@ -2493,7 +2507,12 @@ typedef struct scsi_qla_host { /* Needed for BEACON */ uint16_t beacon_blink_led; - uint16_t beacon_green_on; + uint8_t beacon_color_state; +#define QLA_LED_GRN_ON 0x01 +#define QLA_LED_YLW_ON 0x02 +#define QLA_LED_ABR_ON 0x04 +#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */ + /* ISP2322: red, green, amber. */ uint16_t zio_mode; uint16_t zio_timer; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f2f5454a05e9..eb35198bc8cf 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -75,8 +75,6 @@ extern void qla2x00_cmd_timeout(srb_t *); extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int); extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int); -extern void qla2x00_blink_led(scsi_qla_host_t *); - extern int qla2x00_down_timeout(struct semaphore *, unsigned long); extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); @@ -235,6 +233,13 @@ extern int qla2x00_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, extern int qla24xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, uint32_t); +extern int qla2x00_beacon_on(struct scsi_qla_host *); +extern int qla2x00_beacon_off(struct scsi_qla_host *); +extern void qla2x00_beacon_blink(struct scsi_qla_host *); +extern int qla24xx_beacon_on(struct scsi_qla_host *); +extern int qla24xx_beacon_off(struct scsi_qla_host *); +extern void qla24xx_beacon_blink(struct scsi_qla_host *); + /* * Global Function Prototypes in qla_dbg.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 6e133edb2016..57179dabcccf 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1365,6 +1365,9 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.intr_handler = qla2300_intr_handler; ha->isp_ops.fw_dump = qla2300_fw_dump; ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump; + ha->isp_ops.beacon_on = qla2x00_beacon_on; + ha->isp_ops.beacon_off = qla2x00_beacon_off; + ha->isp_ops.beacon_blink = qla2x00_beacon_blink; ha->gid_list_info_size = 6; } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { host->max_id = MAX_TARGETS_2200; @@ -1401,6 +1404,9 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.write_nvram = qla24xx_write_nvram_data; ha->isp_ops.fw_dump = qla24xx_fw_dump; ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump; + ha->isp_ops.beacon_on = qla24xx_beacon_on; + ha->isp_ops.beacon_off = qla24xx_beacon_off; + ha->isp_ops.beacon_blink = qla24xx_beacon_blink; ha->gid_list_info_size = 8; } host->can_queue = ha->request_q_length + 128; @@ -2315,6 +2321,9 @@ qla2x00_do_dpc(void *data) if (!ha->interrupts_on) ha->isp_ops.enable_intrs(ha); + if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags)) + ha->isp_ops.beacon_blink(ha); + ha->dpc_active = 0; } /* End of while(1) */ @@ -2492,6 +2501,12 @@ qla2x00_timer(scsi_qla_host_t *ha) atomic_read(&ha->loop_down_timer))); } + /* Check if beacon LED needs to be blinked */ + if (ha->beacon_blink_led == 1) { + set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags); + start_dpc++; + } + /* Schedule the DPC routine if needed */ if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || @@ -2500,6 +2515,7 @@ qla2x00_timer(scsi_qla_host_t *ha) start_dpc || test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) || test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) || + test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) || test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && ha->dpc_wait && !ha->dpc_active) { diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index f4d755a643e4..3105bb93cc19 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -695,3 +695,297 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr, return ret; } + + +static inline void +qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + if (IS_QLA2322(ha)) { + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_ALL_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPIO_LED_RGA_ON; + } + } else { + /* Flip green led only. */ + if (ha->beacon_color_state == QLA_LED_GRN_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_GRN_ON; + *pflags = GPIO_LED_GREEN_ON_AMBER_OFF; + } + } +} + +void +qla2x00_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + uint16_t led_color = 0; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Save the Original GPIOE. */ + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + + /* Set the modified gpio_enable values */ + gpio_enable |= GPIO_LED_MASK; + + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + qla2x00_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPIO_LED_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla2x00_beacon_on(struct scsi_qla_host *ha) +{ + uint16_t gpio_enable; + uint16_t gpio_data; + unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] |= FO1_DISABLE_GPIO6_7; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + if (ha->pio_address) + reg = (struct device_reg_2xxx __iomem *)ha->pio_address; + + /* Turn off LEDs. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + if (ha->pio_address) { + gpio_enable = RD_REG_WORD_PIO(®->gpioe); + gpio_data = RD_REG_WORD_PIO(®->gpiod); + } else { + gpio_enable = RD_REG_WORD(®->gpioe); + gpio_data = RD_REG_WORD(®->gpiod); + } + gpio_enable |= GPIO_LED_MASK; + + /* Set the modified gpio_enable values. */ + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + } else { + WRT_REG_WORD(®->gpioe, gpio_enable); + RD_REG_WORD(®->gpioe); + } + + /* Clear out previously set LED colour. */ + gpio_data &= ~GPIO_LED_MASK; + if (ha->pio_address) { + WRT_REG_WORD_PIO(®->gpiod, gpio_data); + } else { + WRT_REG_WORD(®->gpiod, gpio_data); + RD_REG_WORD(®->gpiod); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* + * Let the per HBA timer kick off the blinking process based on + * the following flags. No need to do anything else now. + */ + ha->beacon_blink_led = 1; + ha->beacon_color_state = 0; + + return QLA_SUCCESS; +} + +int +qla2x00_beacon_off(struct scsi_qla_host *ha) +{ + int rval = QLA_SUCCESS; + + ha->beacon_blink_led = 0; + + /* Set the on flag so when it gets flipped it will be off. */ + if (IS_QLA2322(ha)) + ha->beacon_color_state = QLA_LED_ALL_ON; + else + ha->beacon_color_state = QLA_LED_GRN_ON; + + ha->isp_ops.beacon_blink(ha); /* This turns green LED off */ + + ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; + ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7; + + rval = qla2x00_set_fw_options(ha, ha->fw_options); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return rval; +} + + +static inline void +qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) +{ + /* Flip all colors. */ + if (ha->beacon_color_state == QLA_LED_ALL_ON) { + /* Turn off. */ + ha->beacon_color_state = 0; + *pflags = 0; + } else { + /* Turn on. */ + ha->beacon_color_state = QLA_LED_ALL_ON; + *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON; + } +} + +void +qla24xx_beacon_blink(struct scsi_qla_host *ha) +{ + uint16_t led_color = 0; + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + /* Save the Original GPIOD. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Set the color bits. */ + qla24xx_flip_colors(ha, &led_color); + + /* Clear out any previously set LED color. */ + gpio_data &= ~GPDX_LED_COLOR_MASK; + + /* Set the new input LED color to GPIOD. */ + gpio_data |= led_color; + + /* Set the modified gpio_data values. */ + WRT_REG_DWORD(®->gpiod, gpio_data); + gpio_data = RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +int +qla24xx_beacon_on(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + if (ha->beacon_blink_led == 0) { + /* Enable firmware for update */ + ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; + + if (qla2x00_get_fw_options(ha, ha->fw_options) != + QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon on).\n"); + return QLA_FUNCTION_FAILED; + } + + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Enable the gpio_data reg for update. */ + gpio_data |= GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } + + /* So all colors blink together. */ + ha->beacon_color_state = 0; + + /* Let the per HBA timer kick off the blinking process. */ + ha->beacon_blink_led = 1; + + return QLA_SUCCESS; +} + +int +qla24xx_beacon_off(struct scsi_qla_host *ha) +{ + uint32_t gpio_data; + unsigned long flags; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + + ha->beacon_blink_led = 0; + ha->beacon_color_state = QLA_LED_ALL_ON; + + ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */ + + /* Give control back to firmware. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + gpio_data = RD_REG_DWORD(®->gpiod); + + /* Disable the gpio_data reg for update. */ + gpio_data &= ~GPDX_LED_UPDATE_MASK; + WRT_REG_DWORD(®->gpiod, gpio_data); + RD_REG_DWORD(®->gpiod); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL; + + if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to update fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to get fw options (beacon off).\n"); + return QLA_FUNCTION_FAILED; + } + + return QLA_SUCCESS; +} |