summaryrefslogtreecommitdiff
path: root/include/linux/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mmc')
-rw-r--r--include/linux/mmc/card.h12
-rw-r--r--include/linux/mmc/core.h1
-rw-r--r--include/linux/mmc/host.h58
-rw-r--r--include/linux/mmc/mmc.h3
-rw-r--r--include/linux/mmc/sdio_func.h3
5 files changed, 76 insertions, 1 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 403aa505f27e..2ee22e8af110 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -40,6 +40,8 @@ struct mmc_csd {
};
struct mmc_ext_csd {
+ u8 rev;
+ unsigned int sa_timeout; /* Units: 100ns */
unsigned int hs_max_dtr;
unsigned int sectors;
};
@@ -62,7 +64,8 @@ struct sdio_cccr {
low_speed:1,
wide_bus:1,
high_power:1,
- high_speed:1;
+ high_speed:1,
+ disable_cd:1;
};
struct sdio_cis {
@@ -94,6 +97,8 @@ struct mmc_card {
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+ unsigned int quirks; /* card quirks */
+#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
@@ -129,6 +134,11 @@ struct mmc_card {
#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_LENIENT_FN0;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 7ac8b500d55c..e4898e9eeb59 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
extern void mmc_release_host(struct mmc_host *host);
+extern int mmc_try_claim_host(struct mmc_host *host);
/**
* mmc_claim_host - exclusively claim a host
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 3e7615e9087e..81bb42358595 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -51,6 +51,35 @@ struct mmc_ios {
};
struct mmc_host_ops {
+ /*
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. 'enable' is called
+ * when the host is claimed and 'disable' is called (or scheduled with
+ * a delay) when the host is released. The 'disable' is scheduled if
+ * the disable delay set by 'mmc_set_disable_delay()' is non-zero,
+ * otherwise 'disable' is called immediately. 'disable' may be
+ * scheduled repeatedly, to permit ever greater power saving at the
+ * expense of ever greater latency to re-enable. Rescheduling is
+ * determined by the return value of the 'disable' method. A positive
+ * value gives the delay in milliseconds.
+ *
+ * In the case where a host function (like set_ios) may be called
+ * with or without the host claimed, enabling and disabling can be
+ * done directly and will nest correctly. Call 'mmc_host_enable()' and
+ * 'mmc_host_lazy_disable()' for this purpose, but note that these
+ * functions must be paired.
+ *
+ * Alternatively, 'mmc_host_enable()' may be paired with
+ * 'mmc_host_disable()' which calls 'disable' immediately. In this
+ * case the 'disable' method will be called with 'lazy' set to 0.
+ * This is mainly useful for error paths.
+ *
+ * Because lazy disable may be called from a work queue, the 'disable'
+ * method must claim the host when 'lazy' != 0, which will work
+ * correctly because recursion is detected and handled.
+ */
+ int (*enable)(struct mmc_host *host);
+ int (*disable)(struct mmc_host *host, int lazy);
void (*request)(struct mmc_host *host, struct mmc_request *req);
/*
* Avoid calling these three functions too often or in a "fast path",
@@ -118,6 +147,9 @@ struct mmc_host {
#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */
+#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
+#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
+#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
@@ -142,9 +174,18 @@ struct mmc_host {
unsigned int removed:1; /* host is being removed */
#endif
+ /* Only used with MMC_CAP_DISABLE */
+ int enabled; /* host is enabled */
+ int nesting_cnt; /* "enable" nesting count */
+ int en_dis_recurs; /* detect recursion */
+ unsigned int disable_delay; /* disable delay in msecs */
+ struct delayed_work disable; /* disabling work */
+
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
+ struct task_struct *claimer; /* task that has host claimed */
+ int claim_cnt; /* "claim" nesting count */
struct delayed_work detect;
@@ -183,6 +224,9 @@ static inline void *mmc_priv(struct mmc_host *host)
extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
extern int mmc_resume_host(struct mmc_host *);
+extern void mmc_power_save_host(struct mmc_host *host);
+extern void mmc_power_restore_host(struct mmc_host *host);
+
extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
@@ -197,5 +241,19 @@ struct regulator;
int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit);
+int mmc_card_awake(struct mmc_host *host);
+int mmc_card_sleep(struct mmc_host *host);
+int mmc_card_can_sleep(struct mmc_host *host);
+
+int mmc_host_enable(struct mmc_host *host);
+int mmc_host_disable(struct mmc_host *host);
+int mmc_host_lazy_disable(struct mmc_host *host);
+
+static inline void mmc_set_disable_delay(struct mmc_host *host,
+ unsigned int disable_delay)
+{
+ host->disable_delay = disable_delay;
+}
+
#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 14b81f3e5232..c02c8db73701 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -31,6 +31,7 @@
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
+#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
@@ -127,6 +128,7 @@
#define R1_STATUS(x) (x & 0xFFFFE000)
#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
#define R1_APP_CMD (1 << 5) /* sr, c */
/*
@@ -254,6 +256,7 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT 217
/*
* EXT_CSD field definitions
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 451bdfc85830..ac3ab683fec6 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -67,6 +67,7 @@ struct sdio_func {
#define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
#define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
+#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
/*
* SDIO function device driver
@@ -81,6 +82,8 @@ struct sdio_driver {
struct device_driver drv;
};
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code