diff options
Diffstat (limited to 'include/linux')
30 files changed, 530 insertions, 72 deletions
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h index cd4bcb6989ce..7d650a0e3d8f 100644 --- a/include/linux/arcdevice.h +++ b/include/linux/arcdevice.h @@ -337,7 +337,8 @@ struct net_device *alloc_arcdev(const char *name); int arcnet_open(struct net_device *dev); int arcnet_close(struct net_device *dev); -int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev); +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev); void arcnet_timeout(struct net_device *dev); #endif /* __KERNEL__ */ diff --git a/include/linux/connector.h b/include/linux/connector.h index b68d27850d51..47ebf416f512 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -136,7 +136,7 @@ struct cn_callback_data { void *ddata; void *callback_priv; - void (*callback) (void *); + void (*callback) (struct cn_msg *); void *free; }; @@ -167,11 +167,11 @@ struct cn_dev { struct cn_queue_dev *cbdev; }; -int cn_add_callback(struct cb_id *, char *, void (*callback) (void *)); +int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *)); void cn_del_callback(struct cb_id *); int cn_netlink_send(struct cn_msg *, u32, gfp_t); -int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)); +int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work); diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h index 7d2e10006188..b7cdbb4373df 100644 --- a/include/linux/dcbnl.h +++ b/include/linux/dcbnl.h @@ -50,6 +50,8 @@ struct dcbmsg { * @DCB_CMD_SNUMTCS: set the number of traffic classes * @DCB_CMD_GBCN: set backward congestion notification configuration * @DCB_CMD_SBCN: get backward congestion notification configration. + * @DCB_CMD_GAPP: get application protocol configuration + * @DCB_CMD_SAPP: set application protocol configuration */ enum dcbnl_commands { DCB_CMD_UNDEFINED, @@ -80,6 +82,9 @@ enum dcbnl_commands { DCB_CMD_BCN_GCFG, DCB_CMD_BCN_SCFG, + DCB_CMD_GAPP, + DCB_CMD_SAPP, + __DCB_CMD_ENUM_MAX, DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, }; @@ -114,6 +119,7 @@ enum dcbnl_attrs { DCB_ATTR_CAP, DCB_ATTR_NUMTCS, DCB_ATTR_BCN, + DCB_ATTR_APP, __DCB_ATTR_ENUM_MAX, DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1, @@ -338,5 +344,17 @@ enum dcb_general_attr_values { DCB_ATTR_VALUE_UNDEFINED = 0xff }; +#define DCB_APP_IDTYPE_ETHTYPE 0x00 +#define DCB_APP_IDTYPE_PORTNUM 0x01 +enum dcbnl_app_attrs { + DCB_APP_ATTR_UNDEFINED, + + DCB_APP_ATTR_IDTYPE, + DCB_APP_ATTR_ID, + DCB_APP_ATTR_PRIORITY, + + __DCB_APP_ATTR_ENUM_MAX, + DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1, +}; #endif /* __LINUX_DCBNL_H__ */ diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 9b660bd2e2b3..90c4a3616d94 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -368,6 +368,7 @@ struct net_device; /* Some generic methods drivers may use in their ethtool_ops */ u32 ethtool_op_get_link(struct net_device *dev); +u32 ethtool_op_get_rx_csum(struct net_device *dev); u32 ethtool_op_get_tx_csum(struct net_device *dev); int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index 6a6e701f1631..ee275c8b3df1 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -38,7 +38,7 @@ struct hdlc_proto { int (*ioctl)(struct net_device *dev, struct ifreq *ifr); __be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev); int (*netif_rx)(struct sk_buff *skb); - int (*xmit)(struct sk_buff *skb, struct net_device *dev); + netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev); struct module *module; struct hdlc_proto *next; /* next protocol in the list */ }; @@ -51,7 +51,7 @@ typedef struct hdlc_device { unsigned short encoding, unsigned short parity); /* hardware driver must handle this instead of dev->hard_start_xmit */ - int (*xmit)(struct sk_buff *skb, struct net_device *dev); + netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev); /* Things below are for HDLC layer internal use only */ const struct hdlc_proto *proto; @@ -60,7 +60,7 @@ typedef struct hdlc_device { spinlock_t state_lock; void *state; void *priv; -}hdlc_device; +} hdlc_device; @@ -106,7 +106,7 @@ void hdlc_close(struct net_device *dev); /* May be used by hardware driver */ int hdlc_change_mtu(struct net_device *dev, int new_mtu); /* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */ -int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev); +netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev); int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto, size_t size); diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index b6a85183c333..c0d8357917e2 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -171,8 +171,6 @@ struct icmp6_filter { #ifdef __KERNEL__ #include <linux/netdevice.h> -#include <linux/skbuff.h> - extern void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a9173d5434d1..52e15e079c61 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -115,7 +115,7 @@ #define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_MAX_MESH_ID_LEN 32 -#define IEEE80211_MESH_CONFIG_LEN 19 +#define IEEE80211_MESH_CONFIG_LEN 24 #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F @@ -802,6 +802,31 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +/* + * Maximum length of AMPDU that the STA can receive. + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_max_ampdu_length_exp { + IEEE80211_HT_MAX_AMPDU_8K = 0, + IEEE80211_HT_MAX_AMPDU_16K = 1, + IEEE80211_HT_MAX_AMPDU_32K = 2, + IEEE80211_HT_MAX_AMPDU_64K = 3 +}; + +#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 + +/* Minimum MPDU start spacing */ +enum ieee80211_min_mpdu_spacing { + IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ + IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ + IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ + IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ + IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ + IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ + IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ + IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ +}; + /** * struct ieee80211_ht_info - HT information * @@ -1196,6 +1221,10 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +/* AKM suite selectors */ +#define WLAN_AKM_SUITE_8021X 0x000FAC01 +#define WLAN_AKM_SUITE_PSK 0x000FAC02 + #define WLAN_MAX_KEY_LEN 32 /** diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index b554300ef8bf..282eb37e2dec 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -87,7 +87,6 @@ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ #define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ #define ARPHRD_IEEE802154 804 -#define ARPHRD_IEEE802154_PHY 805 #define ARPHRD_PHONET 820 /* PhoNet media type */ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 70fdba2bbf71..580b6004d00e 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -139,10 +139,10 @@ extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); /* * Display a 6 byte device address (MAC) in a readable format. */ -extern char *print_mac(char *buf, const unsigned char *addr); +extern char *print_mac(char *buf, const unsigned char *addr) __deprecated; #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" #define MAC_BUF_SIZE 18 -#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused +#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] #endif diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 915ba5789f0e..3f5fd523b49d 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -62,6 +62,7 @@ #define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ #define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ #define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ /* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ #define TUN_PKT_STRIP 0x0001 diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h new file mode 100644 index 000000000000..4b3ecc40889a --- /dev/null +++ b/include/linux/isdn/hdlc.h @@ -0,0 +1,82 @@ +/* + * hdlc.h -- General purpose ISDN HDLC decoder. + * + * Implementation of a HDLC decoder/encoder in software. + * Neccessary because some ISDN devices don't have HDLC + * controllers. + * + * Copyright (C) + * 2009 Karsten Keil <keil@b1-systems.de> + * 2002 Wolfgang Mües <wolfgang@iksw-muees.de> + * 2001 Frode Isaksen <fisaksen@bewan.com> + * 2001 Kai Germaschewski <kai.germaschewski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ISDNHDLC_H__ +#define __ISDNHDLC_H__ + +struct isdnhdlc_vars { + int bit_shift; + int hdlc_bits1; + int data_bits; + int ffbit_shift; /* encoding only */ + int state; + int dstpos; + + u16 crc; + + u8 cbin; + u8 shift_reg; + u8 ffvalue; + + /* set if transferring data */ + u32 data_received:1; + /* set if D channel (send idle instead of flags) */ + u32 dchannel:1; + /* set if 56K adaptation */ + u32 do_adapt56:1; + /* set if in closing phase (need to send CRC + flag) */ + u32 do_closing:1; + /* set if data is bitreverse */ + u32 do_bitreverse:1; +}; + +/* Feature Flags */ +#define HDLC_56KBIT 0x01 +#define HDLC_DCHANNEL 0x02 +#define HDLC_BITREVERSE 0x04 + +/* + The return value from isdnhdlc_decode is + the frame length, 0 if no complete frame was decoded, + or a negative error number +*/ +#define HDLC_FRAMING_ERROR 1 +#define HDLC_CRC_ERROR 2 +#define HDLC_LENGTH_ERROR 3 + +extern void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features); + +extern int isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src, + int slen, int *count, u8 *dst, int dsize); + +extern void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features); + +extern int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src, + u16 slen, int *count, u8 *dst, int dsize); + +#endif /* __ISDNHDLC_H__ */ diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index 7f9831da847f..4af841408fb5 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -168,6 +168,7 @@ struct bchannel { extern int mISDN_initdchannel(struct dchannel *, int, void *); extern int mISDN_initbchannel(struct bchannel *, int); extern int mISDN_freedchannel(struct dchannel *); +extern void mISDN_clear_bchannel(struct bchannel *); extern int mISDN_freebchannel(struct bchannel *); extern void queue_ch_frame(struct mISDNchannel *, u_int, int, struct sk_buff *); diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 45100b39a7cf..536ca12442ca 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -37,7 +37,7 @@ */ #define MISDN_MAJOR_VERSION 1 #define MISDN_MINOR_VERSION 1 -#define MISDN_RELEASE 20 +#define MISDN_RELEASE 21 /* primitives for information exchange * generell format @@ -153,6 +153,18 @@ #define HFC_VOL_CHANGE_RX 0x2602 #define HFC_SPL_LOOP_ON 0x2603 #define HFC_SPL_LOOP_OFF 0x2604 +/* for T30 FAX and analog modem */ +#define HW_MOD_FRM 0x4000 +#define HW_MOD_FRH 0x4001 +#define HW_MOD_FTM 0x4002 +#define HW_MOD_FTH 0x4003 +#define HW_MOD_FTS 0x4004 +#define HW_MOD_CONNECT 0x4010 +#define HW_MOD_OK 0x4011 +#define HW_MOD_NOCARR 0x4012 +#define HW_MOD_FCERROR 0x4013 +#define HW_MOD_READY 0x4014 +#define HW_MOD_LASTDATA 0x4015 /* DSP_TONE_PATT_ON parameter */ #define TONE_OFF 0x0000 @@ -224,6 +236,8 @@ #define ISDN_P_B_L2DTMF 0x24 #define ISDN_P_B_L2DSP 0x25 #define ISDN_P_B_L2DSPHDLC 0x26 +#define ISDN_P_B_T30_FAX 0x27 +#define ISDN_P_B_MODEM_ASYNC 0x28 #define OPTION_L2_PMX 1 #define OPTION_L2_PTP 2 diff --git a/include/linux/mdio.h b/include/linux/mdio.h index cfdf1df2875e..c779b49a1fda 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -304,7 +304,7 @@ static inline __u16 mdio_phy_id_devad(int phy_id) */ struct mdio_if_info { int prtad; - u32 __bitwise mmds; + u32 mmds; unsigned mode_support; struct net_device *dev; diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 39751c8cde9c..2dbfb5a05994 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -22,6 +22,12 @@ /* * Vendors and devices. Sort key: vendor first, device next. */ +#define SDIO_VENDOR_ID_INTEL 0x0089 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403 +#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404 +#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405 +#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406 #define SDIO_VENDOR_ID_MARVELL 0x02df #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103 diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h index 3ceb0cc1bc78..2a739462caeb 100644 --- a/include/linux/net_dropmon.h +++ b/include/linux/net_dropmon.h @@ -3,7 +3,6 @@ #include <linux/types.h> #include <linux/netlink.h> -#include <linux/types.h> struct net_dm_drop_point { __u8 pc[8]; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d4a4d9867794..121cbad0aae5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -72,10 +72,6 @@ struct wireless_dev; /* Backlog congestion levels */ #define NET_RX_SUCCESS 0 /* keep 'em coming, baby */ #define NET_RX_DROP 1 /* packet dropped */ -#define NET_RX_CN_LOW 2 /* storm alert, just in case */ -#define NET_RX_CN_MOD 3 /* Storm on its way! */ -#define NET_RX_CN_HIGH 4 /* The storm is here */ -#define NET_RX_BAD 5 /* packet dropped due to kernel error */ /* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It * indicates that the device will soon be dropping packets, or already drops @@ -83,17 +79,19 @@ struct wireless_dev; #define net_xmit_eval(e) ((e) == NET_XMIT_CN? 0 : (e)) #define net_xmit_errno(e) ((e) != NET_XMIT_CN ? -ENOBUFS : 0) +/* Driver transmit return codes */ +enum netdev_tx { + NETDEV_TX_OK = 0, /* driver took care of packet */ + NETDEV_TX_BUSY, /* driver tx path was busy*/ + NETDEV_TX_LOCKED = -1, /* driver tx lock was already taken */ +}; +typedef enum netdev_tx netdev_tx_t; + #endif #define MAX_ADDR_LEN 32 /* Largest hardware address length */ -/* Driver transmit return codes */ -#define NETDEV_TX_OK 0 /* driver took care of packet */ -#define NETDEV_TX_BUSY 1 /* driver tx path was busy*/ -#define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */ - #ifdef __KERNEL__ - /* * Compute the worst case header length according to the protocols * used. @@ -511,9 +509,11 @@ struct netdev_queue { * This function is called when network device transistions to the down * state. * - * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev); + * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, + * struct net_device *dev); * Called when a packet needs to be transmitted. - * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED, + * Must return NETDEV_TX_OK , NETDEV_TX_BUSY. + * (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX) * Required can not be NULL. * * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); @@ -584,7 +584,7 @@ struct net_device_ops { void (*ndo_uninit)(struct net_device *dev); int (*ndo_open)(struct net_device *dev); int (*ndo_stop)(struct net_device *dev); - int (*ndo_start_xmit) (struct sk_buff *skb, + netdev_tx_t (*ndo_start_xmit) (struct sk_buff *skb, struct net_device *dev); u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); @@ -627,6 +627,8 @@ struct net_device_ops { void (*ndo_poll_controller)(struct net_device *dev); #endif #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) + int (*ndo_fcoe_enable)(struct net_device *dev); + int (*ndo_fcoe_disable)(struct net_device *dev); int (*ndo_fcoe_ddp_setup)(struct net_device *dev, u16 xid, struct scatterlist *sgl, @@ -705,6 +707,7 @@ struct net_device /* the GSO_MASK reserves bits 16 through 23 */ #define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */ #define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */ +#define NETIF_F_FCOE_MTU (1 << 26) /* Supports max FCoE MTU, 2158 bytes*/ /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 @@ -1260,7 +1263,7 @@ static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) { - clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state); + netif_tx_start_queue(dev_queue); return; } #endif @@ -1366,7 +1369,8 @@ static inline int netif_running(const struct net_device *dev) static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index) { struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index); - clear_bit(__QUEUE_STATE_XOFF, &txq->state); + + netif_tx_start_queue(txq); } /** @@ -1383,7 +1387,7 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index) if (netpoll_trap()) return; #endif - set_bit(__QUEUE_STATE_XOFF, &txq->state); + netif_tx_stop_queue(txq); } /** @@ -1397,7 +1401,8 @@ static inline int __netif_subqueue_stopped(const struct net_device *dev, u16 queue_index) { struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index); - return test_bit(__QUEUE_STATE_XOFF, &txq->state); + + return netif_tx_queue_stopped(txq); } static inline int netif_subqueue_stopped(const struct net_device *dev, @@ -1749,8 +1754,7 @@ static inline void netif_tx_unlock(struct net_device *dev) * force a schedule. */ clear_bit(__QUEUE_STATE_FROZEN, &txq->state); - if (!test_bit(__QUEUE_STATE_XOFF, &txq->state)) - __netif_schedule(txq->qdisc); + netif_schedule_queue(txq); } spin_unlock(&dev->tx_global_lock); } diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index dbea93b694e5..a8d71ed43a0e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -242,6 +242,29 @@ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is * determined by the network interface. * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the STATUS_CODE attribute. + * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), + * sent as an event when the card/driver roamed by itself. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -310,6 +333,14 @@ enum nl80211_commands { NL80211_CMD_JOIN_IBSS, NL80211_CMD_LEAVE_IBSS, + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -449,10 +480,6 @@ enum nl80211_commands { * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive * scanning and include a zero-length SSID (wildcard) for wildcard scan - * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the - * scan result list changes (BSS expired or added) so that applications - * can verify that they got a single, consistent snapshot (when all dump - * messages carried the same generation number) * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain @@ -511,6 +538,52 @@ enum nl80211_commands { * authorized by user space. Otherwise, port is marked authorized by * default in station mode. * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to + * indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate + * which group key cipher will be used with the connection (a u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate + * which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate + * which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE + * commands to specify using a reassociate frame + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -582,7 +655,7 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_FREQUENCIES, NL80211_ATTR_SCAN_SSIDS, - NL80211_ATTR_SCAN_GENERATION, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ NL80211_ATTR_BSS, NL80211_ATTR_REG_INITIATOR, @@ -619,16 +692,42 @@ enum nl80211_attrs { NL80211_ATTR_CONTROL_PORT, + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION + /* * Allow user space programs to use #ifdef on new attributes by defining them * here */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS @@ -642,6 +741,12 @@ enum nl80211_attrs { #define NL80211_ATTR_SSID NL80211_ATTR_SSID #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -650,6 +755,9 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1168,6 +1276,7 @@ enum nl80211_channel_type { * in mBm (100 * dBm) (s32) * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -1181,6 +1290,7 @@ enum nl80211_bss { NL80211_BSS_INFORMATION_ELEMENTS, NL80211_BSS_SIGNAL_MBM, NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -1188,18 +1298,37 @@ enum nl80211_bss { }; /** + * enum nl80211_bss_status - BSS "status" + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** * enum nl80211_auth_type - AuthenticationType * * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. */ enum nl80211_auth_type { NL80211_AUTHTYPE_OPEN_SYSTEM, NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC }; /** @@ -1224,4 +1353,39 @@ enum nl80211_mfp { NL80211_MFP_REQUIRED, }; +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 2cda00ccfcca..b7d9435d5a9f 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -64,12 +64,14 @@ enum { IEEE802154_ATTR_COORD_REALIGN, IEEE802154_ATTR_SEC, + IEEE802154_ATTR_PAGE, + __IEEE802154_ATTR_MAX, }; #define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1) -extern struct nla_policy ieee802154_policy[]; +extern const struct nla_policy ieee802154_policy[]; /* commands */ /* REQ should be responded with CONF @@ -111,6 +113,8 @@ enum { IEEE802154_RX_ENABLE_REQ, /* Not supported yet */ IEEE802154_RX_ENABLE_CONF, /* Not supported yet */ + IEEE802154_LIST_IFACE, + __IEEE802154_CMD_MAX, }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 73b46b6b904f..85492546d33d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1984,6 +1984,8 @@ #define PCI_VENDOR_ID_SAMSUNG 0x144d +#define PCI_VENDOR_ID_GIGABYTE 0x1458 + #define PCI_VENDOR_ID_AMBIT 0x1468 #define PCI_VENDOR_ID_MYRICOM 0x14c1 @@ -2062,7 +2064,6 @@ #define PCI_DEVICE_ID_TIGON3_5787M 0x1693 #define PCI_DEVICE_ID_TIGON3_5782 0x1696 #define PCI_DEVICE_ID_TIGON3_5784 0x1698 -#define PCI_DEVICE_ID_TIGON3_5785 0x1699 #define PCI_DEVICE_ID_TIGON3_5786 0x169a #define PCI_DEVICE_ID_TIGON3_5787 0x169b #define PCI_DEVICE_ID_TIGON3_5788 0x169c diff --git a/include/linux/rds.h b/include/linux/rds.h index d91dc91f5443..89d46e1afbb1 100644 --- a/include/linux/rds.h +++ b/include/linux/rds.h @@ -147,6 +147,18 @@ struct rds_info_socket { u_int64_t inum; } __attribute__((packed)); +struct rds_info_tcp_socket { + __be32 local_addr; + __be16 local_port; + __be32 peer_addr; + __be16 peer_port; + u_int64_t hdr_rem; + u_int64_t data_rem; + u_int32_t last_sent_nxt; + u_int32_t last_expected_una; + u_int32_t last_seen_una; +} __attribute__((packed)); + #define RDS_IB_GID_LEN 16 struct rds_info_rdma_connection { __be32 src_addr; diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 278777fa8a3a..21ca51bf4dd2 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -47,6 +47,7 @@ enum rfkill_type { RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, + RFKILL_TYPE_GPS, NUM_RFKILL_TYPES, }; @@ -82,6 +83,20 @@ struct rfkill_event { __u8 soft, hard; } __packed; +/* + * We are planning to be backward and forward compatible with changes + * to the event struct, by adding new, optional, members at the end. + * When reading an event (whether the kernel from userspace or vice + * versa) we need to accept anything that's at least as large as the + * version 1 event size, but might be able to accept other sizes in + * the future. + * + * One exception is the kernel -- we already have two event sizes in + * that we've made the 'hard' member optional since our only option + * is to ignore it anyway. + */ +#define RFKILL_EVENT_SIZE_V1 8 + /* ioctl for turning off rfkill-input (if present) */ #define RFKILL_IOC_MAGIC 'R' #define RFKILL_IOC_NOINPUT 1 diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f2c69a2cca17..df7b23ac66e6 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -304,7 +304,6 @@ typedef unsigned char *sk_buff_data_t; * @tc_index: Traffic control index * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) - * @do_not_encrypt: set to prevent encryption of this frame * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -380,12 +379,9 @@ struct sk_buff { #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif -#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) - __u8 do_not_encrypt:1; -#endif kmemcheck_bitfield_end(flags2); - /* 0/13/14 bit hole */ + /* 0/14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 5ae8fa22d331..17ffc1f84d76 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -27,24 +27,54 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u8 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; u16 pa0b1; u16 pa0b2; u16 pa1b0; u16 pa1b1; u16 pa1b2; + u16 pa1lob0; + u16 pa1lob1; + u16 pa1lob2; + u16 pa1hib0; + u16 pa1hib1; + u16 pa1hib2; u8 gpio0; /* GPIO pin 0 */ u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u16 boardflags_lo; /* Boardflags (low 16 bits) */ - u16 boardflags_hi; /* Boardflags (high 16 bits) */ + u8 tri2g; /* 2.4GHz TX isolation */ + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; + u8 bxa2g; /* 2GHz BX arch */ + u8 rssisav5g; /* 5GHz RSSI params */ + u8 rssismc5g; + u8 rssismf5g; + u8 bxa5g; /* 5GHz BX arch */ + u16 cck2gpo; /* CCK power offset */ + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ + u16 boardflags_lo; /* Board flags (bits 0-15) */ + u16 boardflags_hi; /* Board flags (bits 16-31) */ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the @@ -58,7 +88,7 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; /* Information about the PCB the circuitry is soldered on. */ diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index d3b1d18922f2..4e27acf0a92f 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, /* PMU support */ extern void ssb_pmu_init(struct ssb_chipcommon *cc); +enum ssb_pmu_ldo_volt_id { + LDO_PAREF = 0, + LDO_VOLT1, + LDO_VOLT2, + LDO_VOLT3, +}; + +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, + enum ssb_pmu_ldo_volt_id id, u32 voltage); +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); #endif /* LINUX_SSB_CHIPCO_H_ */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a01b982b5783..9ae9082eaeb4 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -162,7 +162,7 @@ /* SPROM shadow area. If not otherwise noted, fields are * two bytes wide. Note that the SPROM can _only_ be read - * in two-byte quantinies. + * in two-byte quantities. */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) @@ -327,8 +327,11 @@ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 /* SPROM Revision 8 */ -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ +#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ @@ -354,14 +357,63 @@ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM8_GPIOB_P3_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSISMF2G 0x000F +#define SSB_SPROM8_RSSISMC2G 0x00F0 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4 +#define SSB_SPROM8_RSSISAV2G 0x0700 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8 +#define SSB_SPROM8_BXA2G 0x1800 +#define SSB_SPROM8_BXA2G_SHIFT 11 +#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSISMF5G 0x000F +#define SSB_SPROM8_RSSISMC5G 0x00F0 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4 +#define SSB_SPROM8_RSSISAV5G 0x0700 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8 +#define SSB_SPROM8_BXA5G 0x1800 +#define SSB_SPROM8_BXA5G_SHIFT 11 +#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ +#define SSB_SPROM8_TRI5G_SHIFT 8 +#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ +#define SSB_SPROM8_TRI5GH_SHIFT 8 +#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM8_ITSSI_BG_SHIFT 8 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +#define SSB_SPROM8_PA0B1 0x10C4 +#define SSB_SPROM8_PA0B2 0x10C6 +#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM8_ITSSI_A_SHIFT 8 +#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ +#define SSB_SPROM8_MAXP_AL_SHIFT 8 +#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +#define SSB_SPROM8_PA1B1 0x10CE +#define SSB_SPROM8_PA1B2 0x10D0 +#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +#define SSB_SPROM8_PA1LOB1 0x10D4 +#define SSB_SPROM8_PA1LOB2 0x10D6 +#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x10DA +#define SSB_SPROM8_PA1HIB2 0x10DC +#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { diff --git a/include/linux/tipc.h b/include/linux/tipc.h index bea469455a0c..3d92396639de 100644 --- a/include/linux/tipc.h +++ b/include/linux/tipc.h @@ -209,5 +209,7 @@ struct sockaddr_tipc { #define TIPC_SRC_DROPPABLE 128 /* Default: 0 (resend congested msg) */ #define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */ #define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */ +#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ +#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ #endif diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index 37836b937d97..1ef1ebc2b04f 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -70,12 +70,13 @@ struct rndis_msg_hdr { #define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) /* codes for "status" field of completion messages */ -#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) -#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) -#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) -#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) -#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) -#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) +#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) +#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) +#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) +#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) +#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) +#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) +#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012) /* codes for OID_GEN_PHYSICAL_MEDIUM */ #define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000) diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 310e18a880ff..bb69e256cd16 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -53,6 +53,7 @@ struct usbnet { struct sk_buff_head rxq; struct sk_buff_head txq; struct sk_buff_head done; + struct sk_buff_head rxq_pause; struct urb *interrupt; struct tasklet_struct bh; @@ -63,6 +64,7 @@ struct usbnet { # define EVENT_RX_MEMORY 2 # define EVENT_STS_SPLIT 3 # define EVENT_LINK_RESET 4 +# define EVENT_RX_PAUSED 5 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) @@ -86,6 +88,7 @@ struct driver_info { #define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ +#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */ /* init device ... can sleep, or cause probe() failure */ @@ -97,6 +100,9 @@ struct driver_info { /* reset device ... can sleep */ int (*reset)(struct usbnet *); + /* stop device ... can sleep */ + int (*stop)(struct usbnet *); + /* see if peer is connected ... can sleep */ int (*check_connect)(struct usbnet *); @@ -118,9 +124,8 @@ struct driver_info { * right after minidriver have initialized hardware. */ int (*early_init)(struct usbnet *dev); - /* called by minidriver when link state changes, state: 0=disconnect, - * 1=connect */ - void (*link_change)(struct usbnet *dev, int state); + /* called by minidriver when receiving indication */ + void (*indication)(struct usbnet *dev, void *ind, int indlen); /* for new devices, use the descriptor-reading code instead */ int in; /* rx endpoint */ @@ -177,7 +182,8 @@ struct skb_data { /* skb->cb is one of these */ extern int usbnet_open (struct net_device *net); extern int usbnet_stop (struct net_device *net); -extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net); +extern netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, + struct net_device *net); extern void usbnet_tx_timeout (struct net_device *net); extern int usbnet_change_mtu (struct net_device *net, int new_mtu); @@ -187,6 +193,10 @@ extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); extern void usbnet_unlink_rx_urbs(struct usbnet *); +extern void usbnet_pause_rx(struct usbnet *); +extern void usbnet_resume_rx(struct usbnet *); +extern void usbnet_purge_paused_rxq(struct usbnet *); + extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd); extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd); extern u32 usbnet_get_link (struct net_device *net); diff --git a/include/linux/wireless.h b/include/linux/wireless.h index cb24204851f7..5b4c6c772a9b 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -1132,6 +1132,14 @@ struct __compat_iw_event { }; #define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer) #define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length) + +/* Size of the various events for compat */ +#define IW_EV_COMPAT_CHAR_LEN (IW_EV_COMPAT_LCP_LEN + IFNAMSIZ) +#define IW_EV_COMPAT_UINT_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(__u32)) +#define IW_EV_COMPAT_FREQ_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_COMPAT_PARAM_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_COMPAT_ADDR_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_COMPAT_QUAL_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality)) #define IW_EV_COMPAT_POINT_LEN \ (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ IW_EV_COMPAT_POINT_OFF) |