3 files changed, 357 insertions, 0 deletions
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
new file mode 100644
index 000000000000..88863531d862
--- /dev/null
+++ b/include/linux/pinctrl/machine.h
@@ -0,0 +1,107 @@
+/*
+ * Machine interface for the pinctrl subsystem.
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINMUX_MACHINE_H
+#define __LINUX_PINMUX_MACHINE_H
+
+/**
+ * struct pinmux_map - boards/machines shall provide this map for devices
+ * @name: the name of this specific map entry for the particular machine.
+ *	This is the second parameter passed to pinmux_get() when you want
+ *	to have several mappings to the same device
+ * @ctrl_dev: the pin control device to be used by this mapping, may be NULL
+ *	if you provide .ctrl_dev_name instead (this is more common)
+ * @ctrl_dev_name: the name of the device controlling this specific mapping,
+ *	the name must be the same as in your struct device*, may be NULL if
+ *	you provide .ctrl_dev instead
+ * @function: a function in the driver to use for this mapping, the driver
+ *	will lookup the function referenced by this ID on the specified
+ *	pin control device
+ * @group: sometimes a function can map to different pin groups, so this
+ *	selects a certain specific pin group to activate for the function, if
+ *	left as NULL, the first applicable group will be used
+ * @dev: the device using this specific mapping, may be NULL if you provide
+ *	.dev_name instead (this is more common)
+ * @dev_name: the name of the device using this specific mapping, the name
+ *	must be the same as in your struct device*, may be NULL if you
+ *	provide .dev instead
+ * @hog_on_boot: if this is set to true, the pin control subsystem will itself
+ *	hog the mappings as the pinmux device drivers are attached, so this is
+ *	typically used with system maps (mux mappings without an assigned
+ *	device) that you want to get hogged and enabled by default as soon as
+ *	a pinmux device supporting it is registered. These maps will not be
+ *	disabled and put until the system shuts down.
+ */
+struct pinmux_map {
+	const char *name;
+	struct device *ctrl_dev;
+	const char *ctrl_dev_name;
+	const char *function;
+	const char *group;
+	struct device *dev;
+	const char *dev_name;
+	const bool hog_on_boot;
+};
+
+/*
+ * Convenience macro to set a simple map from a certain pin controller and a
+ * certain function to a named device
+ */
+#define PINMUX_MAP(a, b, c, d) \
+	{ .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d }
+
+/*
+ * Convenience macro to map a system function onto a certain pinctrl device.
+ * System functions are not assigned to a particular device.
+ */
+#define PINMUX_MAP_SYS(a, b, c) \
+	{ .name = a, .ctrl_dev_name = b, .function = c }
+
+/*
+ * Convenience macro to map a function onto the primary device pinctrl device
+ * this is especially helpful on systems that have only one pin controller
+ * or need to set up a lot of mappings on the primary controller.
+ */
+#define PINMUX_MAP_PRIMARY(a, b, c) \
+	{ .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \
+	  .dev_name = c }
+
+/*
+ * Convenience macro to map a system function onto the primary pinctrl device.
+ * System functions are not assigned to a particular device.
+ */
+#define PINMUX_MAP_PRIMARY_SYS(a, b) \
+	{ .name = a, .ctrl_dev_name = "pinctrl.0", .function = b }
+
+/*
+ * Convenience macro to map a system function onto the primary pinctrl device,
+ * to be hogged by the pinmux core until the system shuts down.
+ */
+#define PINMUX_MAP_PRIMARY_SYS_HOG(a, b) \
+	{ .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \
+	  .hog_on_boot = true }
+
+
+#ifdef CONFIG_PINMUX
+
+extern int pinmux_register_mappings(struct pinmux_map const *map,
+				unsigned num_maps);
+
+#else
+
+static inline int pinmux_register_mappings(struct pinmux_map const *map,
+					   unsigned num_maps)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PINMUX */
+#endif
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
new file mode 100644
index 000000000000..3605e947fa90
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl.h
@@ -0,0 +1,133 @@
+/*
+ * Interface the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCTRL_H
+#define __LINUX_PINCTRL_PINCTRL_H
+
+#ifdef CONFIG_PINCTRL
+
+#include <linux/radix-tree.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+
+struct pinctrl_dev;
+struct pinmux_ops;
+struct gpio_chip;
+
+/**
+ * struct pinctrl_pin_desc - boards/machines provide information on their
+ * pins, pads or other muxable units in this struct
+ * @number: unique pin number from the global pin number space
+ * @name: a name for this pin
+ */
+struct pinctrl_pin_desc {
+	unsigned number;
+	const char *name;
+};
+
+/* Convenience macro to define a single named or anonymous pin descriptor */
+#define PINCTRL_PIN(a, b) { .number = a, .name = b }
+#define PINCTRL_PIN_ANON(a) { .number = a }
+
+/**
+ * struct pinctrl_gpio_range - each pin controller can provide subranges of
+ * the GPIO number space to be handled by the controller
+ * @node: list node for internal use
+ * @name: a name for the chip in this range
+ * @id: an ID number for the chip in this range
+ * @base: base offset of the GPIO range
+ * @npins: number of pins in the GPIO range, including the base number
+ * @gc: an optional pointer to a gpio_chip
+ */
+struct pinctrl_gpio_range {
+	struct list_head node;
+	const char *name;
+	unsigned int id;
+	unsigned int base;
+	unsigned int npins;
+	struct gpio_chip *gc;
+};
+
+/**
+ * struct pinctrl_ops - global pin control operations, to be implemented by
+ * pin controller drivers.
+ * @list_groups: list the number of selectable named groups available
+ *	in this pinmux driver, the core will begin on 0 and call this
+ *	repeatedly as long as it returns >= 0 to enumerate the groups
+ * @get_group_name: return the group name of the pin group
+ * @get_group_pins: return an array of pins corresponding to a certain
+ *	group selector @pins, and the size of the array in @num_pins
+ * @pin_dbg_show: optional debugfs display hook that will provide per-device
+ *	info for a certain pin in debugfs
+ */
+struct pinctrl_ops {
+	int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector);
+	const char *(*get_group_name) (struct pinctrl_dev *pctldev,
+				       unsigned selector);
+	int (*get_group_pins) (struct pinctrl_dev *pctldev,
+			       unsigned selector,
+			       const unsigned **pins,
+			       unsigned *num_pins);
+	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
+			  unsigned offset);
+};
+
+/**
+ * struct pinctrl_desc - pin controller descriptor, register this to pin
+ * control subsystem
+ * @name: name for the pin controller
+ * @pins: an array of pin descriptors describing all the pins handled by
+ *	this pin controller
+ * @npins: number of descriptors in the array, usually just ARRAY_SIZE()
+ *	of the pins field above
+ * @maxpin: since pin spaces may be sparse, there can he "holes" in the
+ *	pin range, this attribute gives the maximum pin number in the
+ *	total range. This should not be lower than npins for example,
+ *	but may be equal to npins if you have no holes in the pin range.
+ * @pctlops: pin control operation vtable, to support global concepts like
+ *	grouping of pins, this is optional.
+ * @pmxops: pinmux operation vtable, if you support pinmuxing in your driver
+ * @owner: module providing the pin controller, used for refcounting
+ */
+struct pinctrl_desc {
+	const char *name;
+	struct pinctrl_pin_desc const *pins;
+	unsigned int npins;
+	unsigned int maxpin;
+	struct pinctrl_ops *pctlops;
+	struct pinmux_ops *pmxops;
+	struct module *owner;
+};
+
+/* External interface to pin controller */
+extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
+				struct device *dev, void *driver_data);
+extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
+extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
+extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
+extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
+#else
+
+
+/* Sufficiently stupid default function when pinctrl is not in use */
+static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
+{
+	return pin >= 0;
+}
+
+#endif /* !CONFIG_PINCTRL */
+
+#endif /* __LINUX_PINCTRL_PINCTRL_H */
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
new file mode 100644
index 000000000000..3c430e797efc
--- /dev/null
+++ b/include/linux/pinctrl/pinmux.h
@@ -0,0 +1,117 @@
+/*
+ * Interface the pinmux subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINMUX_H
+#define __LINUX_PINCTRL_PINMUX_H
+
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include "pinctrl.h"
+
+/* This struct is private to the core and should be regarded as a cookie */
+struct pinmux;
+
+#ifdef CONFIG_PINMUX
+
+struct pinctrl_dev;
+
+/**
+ * struct pinmux_ops - pinmux operations, to be implemented by pin controller
+ * drivers that support pinmuxing
+ * @request: called by the core to see if a certain pin can be made available
+ *	available for muxing. This is called by the core to acquire the pins
+ *	before selecting any actual mux setting across a function. The driver
+ *	is allowed to answer "no" by returning a negative error code
+ * @free: the reverse function of the request() callback, frees a pin after
+ *	being requested
+ * @list_functions: list the number of selectable named functions available
+ *	in this pinmux driver, the core will begin on 0 and call this
+ *	repeatedly as long as it returns >= 0 to enumerate mux settings
+ * @get_function_name: return the function name of the muxing selector,
+ *	called by the core to figure out which mux setting it shall map a
+ *	certain device to
+ * @get_function_groups: return an array of groups names (in turn
+ *	referencing pins) connected to a certain function selector. The group
+ *	name can be used with the generic @pinctrl_ops to retrieve the
+ *	actual pins affected. The applicable groups will be returned in
+ *	@groups and the number of groups in @num_groups
+ * @enable: enable a certain muxing function with a certain pin group. The
+ *	driver does not need to figure out whether enabling this function
+ *	conflicts some other use of the pins in that group, such collisions
+ *	are handled by the pinmux subsystem. The @func_selector selects a
+ *	certain function whereas @group_selector selects a certain set of pins
+ *	to be used. On simple controllers the latter argument may be ignored
+ * @disable: disable a certain muxing selector with a certain pin group
+ * @gpio_request_enable: requests and enables GPIO on a certain pin.
+ *	Implement this only if you can mux every pin individually as GPIO. The
+ *	affected GPIO range is passed along with an offset into that
+ *	specific GPIO range - function selectors and pin groups are orthogonal
+ *	to this, the core will however make sure the pins do not collide
+ */
+struct pinmux_ops {
+	int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector);
+	const char *(*get_function_name) (struct pinctrl_dev *pctldev,
+					  unsigned selector);
+	int (*get_function_groups) (struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  const char * const **groups,
+				  unsigned * const num_groups);
+	int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector,
+		       unsigned group_selector);
+	void (*disable) (struct pinctrl_dev *pctldev, unsigned func_selector,
+			 unsigned group_selector);
+	int (*gpio_request_enable) (struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned offset);
+};
+
+/* External interface to pinmux */
+extern int pinmux_request_gpio(unsigned gpio);
+extern void pinmux_free_gpio(unsigned gpio);
+extern struct pinmux * __must_check pinmux_get(struct device *dev, const char *name);
+extern void pinmux_put(struct pinmux *pmx);
+extern int pinmux_enable(struct pinmux *pmx);
+extern void pinmux_disable(struct pinmux *pmx);
+
+#else /* !CONFIG_PINMUX */
+
+static inline int pinmux_request_gpio(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void pinmux_free_gpio(unsigned gpio)
+{
+}
+
+static inline struct pinmux * __must_check pinmux_get(struct device *dev, const char *name)
+{
+	return NULL;
+}
+
+static inline void pinmux_put(struct pinmux *pmx)
+{
+}
+
+static inline int pinmux_enable(struct pinmux *pmx)
+{
+	return 0;
+}
+
+static inline void pinmux_disable(struct pinmux *pmx)
+{
+}
+
+#endif /* CONFIG_PINMUX */
+
+#endif /* __LINUX_PINCTRL_PINMUX_H */