diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/net/cfg80211.h | 191 | ||||
| -rw-r--r-- | include/net/mac80211.h | 78 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 25 |
3 files changed, 224 insertions, 70 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f2c318655519..e46c437944f7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -341,8 +341,8 @@ struct vif_params { * @seq_len: length of @seq. */ struct key_params { - u8 *key; - u8 *seq; + const u8 *key; + const u8 *seq; int key_len; int seq_len; u32 cipher; @@ -458,7 +458,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, */ int cfg80211_chandef_dfs_required(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, - enum nl80211_iftype); + enum nl80211_iftype iftype); /** * ieee80211_chandef_rate_flags - returns rate flags for a channel @@ -694,8 +694,10 @@ struct cfg80211_ap_settings { * * @chandef: defines the channel to use after the switch * @beacon_csa: beacon data while performing the switch - * @counter_offset_beacon: offset for the counter within the beacon (tail) - * @counter_offset_presp: offset for the counter within the probe response + * @counter_offsets_beacon: offsets of the counters within the beacon (tail) + * @counter_offsets_presp: offsets of the counters within the probe response + * @n_counter_offsets_beacon: number of csa counters the beacon (tail) + * @n_counter_offsets_presp: number of csa counters in the probe response * @beacon_after: beacon data to be used on the new channel * @radar_required: whether radar detection is required on the new channel * @block_tx: whether transmissions should be blocked while changing @@ -704,7 +706,10 @@ struct cfg80211_ap_settings { struct cfg80211_csa_settings { struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon_csa; - u16 counter_offset_beacon, counter_offset_presp; + const u16 *counter_offsets_beacon; + const u16 *counter_offsets_presp; + unsigned int n_counter_offsets_beacon; + unsigned int n_counter_offsets_presp; struct cfg80211_beacon_data beacon_after; bool radar_required; bool block_tx; @@ -868,36 +873,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled + * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled */ enum station_info_flags { - STATION_INFO_INACTIVE_TIME = 1<<0, - STATION_INFO_RX_BYTES = 1<<1, - STATION_INFO_TX_BYTES = 1<<2, - STATION_INFO_LLID = 1<<3, - STATION_INFO_PLID = 1<<4, - STATION_INFO_PLINK_STATE = 1<<5, - STATION_INFO_SIGNAL = 1<<6, - STATION_INFO_TX_BITRATE = 1<<7, - STATION_INFO_RX_PACKETS = 1<<8, - STATION_INFO_TX_PACKETS = 1<<9, - STATION_INFO_TX_RETRIES = 1<<10, - STATION_INFO_TX_FAILED = 1<<11, - STATION_INFO_RX_DROP_MISC = 1<<12, - STATION_INFO_SIGNAL_AVG = 1<<13, - STATION_INFO_RX_BITRATE = 1<<14, - STATION_INFO_BSS_PARAM = 1<<15, - STATION_INFO_CONNECTED_TIME = 1<<16, - STATION_INFO_ASSOC_REQ_IES = 1<<17, - STATION_INFO_STA_FLAGS = 1<<18, - STATION_INFO_BEACON_LOSS_COUNT = 1<<19, - STATION_INFO_T_OFFSET = 1<<20, - STATION_INFO_LOCAL_PM = 1<<21, - STATION_INFO_PEER_PM = 1<<22, - STATION_INFO_NONPEER_PM = 1<<23, - STATION_INFO_RX_BYTES64 = 1<<24, - STATION_INFO_TX_BYTES64 = 1<<25, - STATION_INFO_CHAIN_SIGNAL = 1<<26, - STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27, + STATION_INFO_INACTIVE_TIME = BIT(0), + STATION_INFO_RX_BYTES = BIT(1), + STATION_INFO_TX_BYTES = BIT(2), + STATION_INFO_LLID = BIT(3), + STATION_INFO_PLID = BIT(4), + STATION_INFO_PLINK_STATE = BIT(5), + STATION_INFO_SIGNAL = BIT(6), + STATION_INFO_TX_BITRATE = BIT(7), + STATION_INFO_RX_PACKETS = BIT(8), + STATION_INFO_TX_PACKETS = BIT(9), + STATION_INFO_TX_RETRIES = BIT(10), + STATION_INFO_TX_FAILED = BIT(11), + STATION_INFO_RX_DROP_MISC = BIT(12), + STATION_INFO_SIGNAL_AVG = BIT(13), + STATION_INFO_RX_BITRATE = BIT(14), + STATION_INFO_BSS_PARAM = BIT(15), + STATION_INFO_CONNECTED_TIME = BIT(16), + STATION_INFO_ASSOC_REQ_IES = BIT(17), + STATION_INFO_STA_FLAGS = BIT(18), + STATION_INFO_BEACON_LOSS_COUNT = BIT(19), + STATION_INFO_T_OFFSET = BIT(20), + STATION_INFO_LOCAL_PM = BIT(21), + STATION_INFO_PEER_PM = BIT(22), + STATION_INFO_NONPEER_PM = BIT(23), + STATION_INFO_RX_BYTES64 = BIT(24), + STATION_INFO_TX_BYTES64 = BIT(25), + STATION_INFO_CHAIN_SIGNAL = BIT(26), + STATION_INFO_CHAIN_SIGNAL_AVG = BIT(27), + STATION_INFO_EXPECTED_THROUGHPUT = BIT(28), }; /** @@ -1019,6 +1026,8 @@ struct sta_bss_parameters { * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode + * @expected_throughput: expected throughput in kbps (including 802.11 headers) + * towards this station. */ struct station_info { u32 filled; @@ -1057,6 +1066,8 @@ struct station_info { enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; + u32 expected_throughput; + /* * Note: Add a new enum station_info_flags value for each new field and * use it to check which fields are initialized. @@ -1064,6 +1075,19 @@ struct station_info { }; /** + * cfg80211_get_station - retrieve information about a given station + * @dev: the device where the station is supposed to be connected to + * @mac_addr: the mac address of the station of interest + * @sinfo: pointer to the structure to fill with the information + * + * Returns 0 on success and sinfo is filled with the available information + * otherwise returns a negative error code and the content of sinfo has to be + * considered undefined. + */ +int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, + struct station_info *sinfo); + +/** * enum monitor_flags - monitor flags * * Monitor interface configuration flags. Note that these must be the bits @@ -1164,7 +1188,7 @@ struct bss_parameters { int use_cts_prot; int use_short_preamble; int use_short_slot_time; - u8 *basic_rates; + const u8 *basic_rates; u8 basic_rates_len; int ap_isolate; int ht_opmode; @@ -1694,10 +1718,10 @@ struct cfg80211_disassoc_request { * @ht_capa_mask: The bits of ht_capa which are to be used. */ struct cfg80211_ibss_params { - u8 *ssid; - u8 *bssid; + const u8 *ssid; + const u8 *bssid; struct cfg80211_chan_def chandef; - u8 *ie; + const u8 *ie; u8 ssid_len, ie_len; u16 beacon_interval; u32 basic_rates; @@ -1806,8 +1830,8 @@ struct cfg80211_bitrate_mask { * @pmkid: The PMK material itself. */ struct cfg80211_pmksa { - u8 *bssid; - u8 *pmkid; + const u8 *bssid; + const u8 *pmkid; }; /** @@ -1822,7 +1846,7 @@ struct cfg80211_pmksa { * memory, free @mask only! */ struct cfg80211_pkt_pattern { - u8 *mask, *pattern; + const u8 *mask, *pattern; int pattern_len; int pkt_offset; }; @@ -1986,6 +2010,8 @@ struct cfg80211_update_ft_ies_params { * @len: buffer length * @no_cck: don't use cck rates for this frame * @dont_wait_for_ack: tells the low level not to wait for an ack + * @n_csa_offsets: length of csa_offsets array + * @csa_offsets: array of all the csa offsets in the frame */ struct cfg80211_mgmt_tx_params { struct ieee80211_channel *chan; @@ -1995,6 +2021,8 @@ struct cfg80211_mgmt_tx_params { size_t len; bool no_cck; bool dont_wait_for_ack; + int n_csa_offsets; + const u16 *csa_offsets; }; /** @@ -2336,28 +2364,29 @@ struct cfg80211_ops { int (*add_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_parameters *params); + const u8 *mac, + struct station_parameters *params); int (*del_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac); + const u8 *mac); int (*change_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_parameters *params); + const u8 *mac, + struct station_parameters *params); int (*get_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_info *sinfo); + const u8 *mac, struct station_info *sinfo); int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, - int idx, u8 *mac, struct station_info *sinfo); + int idx, u8 *mac, struct station_info *sinfo); int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop); + const u8 *dst, const u8 *next_hop); int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst); + const u8 *dst); int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop); + const u8 *dst, const u8 *next_hop); int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop, - struct mpath_info *pinfo); + u8 *dst, u8 *next_hop, struct mpath_info *pinfo); int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, - int idx, u8 *dst, u8 *next_hop, - struct mpath_info *pinfo); + int idx, u8 *dst, u8 *next_hop, + struct mpath_info *pinfo); int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); @@ -2487,11 +2516,11 @@ struct cfg80211_ops { struct cfg80211_gtk_rekey_data *data); int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, - u8 *peer, u8 action_code, u8 dialog_token, + const u8 *peer, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capability, const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, - u8 *peer, enum nl80211_tdls_operation oper); + const u8 *peer, enum nl80211_tdls_operation oper); int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u64 *cookie); @@ -2638,6 +2667,7 @@ struct ieee80211_iface_limit { * between infrastructure and AP types must match. This is required * only in special cases. * @radar_detect_widths: bitmap of channel widths supported for radar detection + * @radar_detect_regions: bitmap of regions supported for radar detection * * With this structure the driver can describe which interface * combinations it supports concurrently. @@ -2695,6 +2725,7 @@ struct ieee80211_iface_combination { u8 n_limits; bool beacon_int_infra_match; u8 radar_detect_widths; + u8 radar_detect_regions; }; struct ieee80211_txrx_stypes { @@ -2925,6 +2956,17 @@ struct wiphy_vendor_command { * (including P2P GO) or 0 to indicate no such limit is advertised. The * driver is allowed to advertise a theoretical limit that it can reach in * some cases, but may not always reach. + * + * @max_num_csa_counters: Number of supported csa_counters in beacons + * and probe responses. This value should be set if the driver + * wishes to limit the number of csa counters. Default (0) means + * infinite. + * @max_adj_channel_rssi_comp: max offset of between the channel on which the + * frame was sent and the channel on which the frame was heard for which + * the reported rssi is still valid. If a driver is able to compensate the + * low rssi when a frame is heard on different channel, then it should set + * this variable to the maximal offset for which it can compensate. + * This value should be set in MHz. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3042,6 +3084,9 @@ struct wiphy { u16 max_ap_assoc_sta; + u8 max_num_csa_counters; + u8 max_adj_channel_rssi_comp; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3270,7 +3315,7 @@ struct wireless_dev { struct cfg80211_ibss_params ibss; struct cfg80211_connect_params connect; struct cfg80211_cached_keys *keys; - u8 *ie; + const u8 *ie; size_t ie_len; u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; @@ -3511,7 +3556,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, - enum nl80211_iftype iftype, u8 *bssid, bool qos); + enum nl80211_iftype iftype, const u8 *bssid, + bool qos); /** * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame @@ -4312,7 +4358,7 @@ void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, * and not try to connect to any AP any more. */ void cfg80211_disconnected(struct net_device *dev, u16 reason, - u8 *ie, size_t ie_len, gfp_t gfp); + const u8 *ie, size_t ie_len, gfp_t gfp); /** * cfg80211_ready_on_channel - notification of remain_on_channel start @@ -4768,6 +4814,35 @@ int cfg80211_iter_combinations(struct wiphy *wiphy, void *data), void *data); +/* + * cfg80211_stop_iface - trigger interface disconnection + * + * @wiphy: the wiphy + * @wdev: wireless device + * @gfp: context flags + * + * Trigger interface to be stopped as if AP was stopped, IBSS/mesh left, STA + * disconnected. + * + * Note: This doesn't need any locks and is asynchronous. + */ +void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, + gfp_t gfp); + +/** + * cfg80211_shutdown_all_interfaces - shut down all interfaces for a wiphy + * @wiphy: the wiphy to shut down + * + * This function shuts down all interfaces belonging to this wiphy by + * calling dev_close() (and treating non-netdev interfaces as needed). + * It shouldn't really be used unless there are some fatal device errors + * that really can't be recovered in any other way. + * + * Callers must hold the RTNL and be able to deal with callbacks into + * the driver while the function is running. + */ +void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 451c1bf00df9..2c78997bc48d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1113,7 +1113,9 @@ enum ieee80211_vif_flags { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively - * @csa_active: marks whether a channel switch is going on + * @csa_active: marks whether a channel switch is going on. Internally it is + * write-protected by sdata_lock and local->mtx so holding either is fine + * for read access. * @driver_flags: flags/capabilities the driver has for this interface, * these need to be set (or cleared) when the interface is added * or, if supported by the driver, the interface type is changed @@ -1374,6 +1376,7 @@ struct ieee80211_sta_rates { * the station moves to associated state. * @smps_mode: current SMPS mode (off, static or dynamic) * @rates: rate control selection table + * @tdls: indicates whether the STA is a TDLS peer */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1388,6 +1391,7 @@ struct ieee80211_sta { enum ieee80211_sta_rx_bandwidth bandwidth; enum ieee80211_smps_mode smps_mode; struct ieee80211_sta_rates __rcu *rates; + bool tdls; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2765,6 +2769,10 @@ enum ieee80211_roc_type { * information in bss_conf is set up and the beacon can be retrieved. A * channel context is bound before this is called. * @leave_ibss: Leave the IBSS again. + * + * @get_expected_throughput: extract the expected throughput towards the + * specified station. The returned value is expressed in Kbps. It returns 0 + * if the RC algorithm does not have proper data to provide. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2958,6 +2966,7 @@ struct ieee80211_ops { int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + u32 (*get_expected_throughput)(struct ieee80211_sta *sta); }; /** @@ -3407,6 +3416,47 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, */ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); +#define IEEE80211_MAX_CSA_COUNTERS_NUM 2 + +/** + * struct ieee80211_mutable_offsets - mutable beacon offsets + * @tim_offset: position of TIM element + * @tim_length: size of TIM element + * @csa_counter_offs: array of IEEE80211_MAX_CSA_COUNTERS_NUM offsets + * to CSA counters. This array can contain zero values which + * should be ignored. + */ +struct ieee80211_mutable_offsets { + u16 tim_offset; + u16 tim_length; + + u16 csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM]; +}; + +/** + * ieee80211_beacon_get_template - beacon template generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @offs: &struct ieee80211_mutable_offsets pointer to struct that will + * receive the offsets that may be updated by the driver. + * + * If the driver implements beaconing modes, it must use this function to + * obtain the beacon template. + * + * This function should be used if the beacon frames are generated by the + * device, and then the driver must use the returned beacon as the template + * The driver or the device are responsible to update the DTIM and, when + * applicable, the CSA count. + * + * The driver is responsible for freeing the returned skb. + * + * Return: The beacon template. %NULL on error. + */ +struct sk_buff * +ieee80211_beacon_get_template(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_mutable_offsets *offs); + /** * ieee80211_beacon_get_tim - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). @@ -3418,16 +3468,12 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); * Set to 0 if invalid (in non-AP modes). * * If the driver implements beaconing modes, it must use this function to - * obtain the beacon frame/template. + * obtain the beacon frame. * * If the beacon frames are generated by the host system (i.e., not in * hardware/firmware), the driver uses this function to get each beacon - * frame from mac80211 -- it is responsible for calling this function - * before the beacon is needed (e.g. based on hardware interrupt). - * - * If the beacon frames are generated by the device, then the driver - * must use the returned beacon as the template and change the TIM IE - * according to the current DTIM parameters/TIM bitmap. + * frame from mac80211 -- it is responsible for calling this function exactly + * once before the beacon is needed (e.g. based on hardware interrupt). * * The driver is responsible for freeing the returned skb. * @@ -3453,6 +3499,20 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, } /** + * ieee80211_csa_update_counter - request mac80211 to decrement the csa counter + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * The csa counter should be updated after each beacon transmission. + * This function is called implicitly when + * ieee80211_beacon_get/ieee80211_beacon_get_tim are called, however if the + * beacon frames are generated by the device, the driver should call this + * function after each beacon transmission to sync mac80211's csa counters. + * + * Return: new csa counter value + */ +u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif); + +/** * ieee80211_csa_finish - notify mac80211 about channel switch * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @@ -4480,6 +4540,8 @@ struct rate_control_ops { void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); void (*remove_sta_debugfs)(void *priv, void *priv_sta); + + u32 (*get_expected_throughput)(void *priv_sta); }; static inline int rate_supported(struct ieee80211_sta *sta, diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 406010d4def0..fb0efa1f9066 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -503,6 +503,9 @@ * TX status event pertaining to the TX request. * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -1525,10 +1528,10 @@ enum nl80211_commands { * operation). * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. - * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter - * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). - * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter - * field in the probe response (%NL80211_ATTR_PROBE_RESP). + * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel + * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel + * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). * * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. * As specified in the &enum nl80211_rxmgmt_flags. @@ -1576,6 +1579,11 @@ enum nl80211_commands { * advertise values that cannot always be met. In such cases, an attempt * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * @@ -1920,6 +1928,9 @@ enum nl80211_attrs { NL80211_ATTR_IFACE_SOCKET_OWNER, + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2188,6 +2199,8 @@ enum nl80211_sta_bss_param { * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2219,6 +2232,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_TX_BYTES64, NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -3688,6 +3702,8 @@ enum nl80211_iface_limit_attrs { * different channels may be used within this group. * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -3721,6 +3737,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, /* keep last */ NUM_NL80211_IFACE_COMB, |