diff options
Diffstat (limited to 'include')
99 files changed, 2127 insertions, 1436 deletions
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h index 720afc11c2ca..b860218e402e 100644 --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -14,11 +14,19 @@ #include <asm/cpu/addrspace.h> /* Memory segments (32bit Privileged mode addresses) */ +#ifndef CONFIG_CPU_SH2A #define P0SEG 0x00000000 #define P1SEG 0x80000000 #define P2SEG 0xa0000000 #define P3SEG 0xc0000000 #define P4SEG 0xe0000000 +#else +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x00000000 +#define P4SEG 0x80000000 +#endif /* Returns the privileged segment base of a given address */ #define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) diff --git a/include/asm-sh/adx/io.h b/include/asm-sh/adx/io.h deleted file mode 100644 index ab1225f1d557..000000000000 --- a/include/asm-sh/adx/io.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * include/asm-sh/io_adx.h - * - * Copyright (C) 2001 A&D Co., Ltd. - * - * This file may be copied or modified under the terms of the GNU - * General Public License. See linux/COPYING for more information. - * - * IO functions for an A&D ADX Board - */ - -#ifndef _ASM_SH_IO_ADX_H -#define _ASM_SH_IO_ADX_H - -#include <asm/io_generic.h> - -extern unsigned char adx_inb(unsigned long port); -extern unsigned short adx_inw(unsigned long port); -extern unsigned int adx_inl(unsigned long port); - -extern void adx_outb(unsigned char value, unsigned long port); -extern void adx_outw(unsigned short value, unsigned long port); -extern void adx_outl(unsigned int value, unsigned long port); - -extern unsigned char adx_inb_p(unsigned long port); -extern void adx_outb_p(unsigned char value, unsigned long port); - -extern void adx_insb(unsigned long port, void *addr, unsigned long count); -extern void adx_insw(unsigned long port, void *addr, unsigned long count); -extern void adx_insl(unsigned long port, void *addr, unsigned long count); -extern void adx_outsb(unsigned long port, const void *addr, unsigned long count); -extern void adx_outsw(unsigned long port, const void *addr, unsigned long count); -extern void adx_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned char adx_readb(unsigned long addr); -extern unsigned short adx_readw(unsigned long addr); -extern unsigned int adx_readl(unsigned long addr); -extern void adx_writeb(unsigned char b, unsigned long addr); -extern void adx_writew(unsigned short b, unsigned long addr); -extern void adx_writel(unsigned int b, unsigned long addr); - -extern void * adx_ioremap(unsigned long offset, unsigned long size); -extern void adx_iounmap(void *addr); - -extern unsigned long adx_isa_port2addr(unsigned long offset); - -extern void setup_adx(void); -extern void init_adx_IRQ(void); - -#ifdef __WANT_IO_DEF - -#define __inb adx_inb -#define __inw adx_inw -#define __inl adx_inl -#define __outb adx_outb -#define __outw adx_outw -#define __outl adx_outl - -#define __inb_p adx_inb_p -#define __inw_p adx_inw -#define __inl_p adx_inl -#define __outb_p adx_outb_p -#define __outw_p adx_outw -#define __outl_p adx_outl - -#define __insb adx_insb -#define __insw adx_insw -#define __insl adx_insl -#define __outsb adx_outsb -#define __outsw adx_outsw -#define __outsl adx_outsl - -#define __readb adx_readb -#define __readw adx_readw -#define __readl adx_readl -#define __writeb adx_writeb -#define __writew adx_writew -#define __writel adx_writel - -#define __isa_port2addr adx_isa_port2addr -#define __ioremap adx_ioremap -#define __iounmap adx_iounmap - -#endif - -#endif /* _ASM_SH_IO_AANDD_H */ diff --git a/include/asm-sh/apm.h b/include/asm-sh/apm.h new file mode 100644 index 000000000000..8b091e93651f --- /dev/null +++ b/include/asm-sh/apm.h @@ -0,0 +1,46 @@ +/* + * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_APM_H +#define __ASM_SH_APM_H + +#define APM_AC_OFFLINE 0 +#define APM_AC_ONLINE 1 +#define APM_AC_BACKUP 2 +#define APM_AC_UNKNOWN 0xff + +#define APM_BATTERY_STATUS_HIGH 0 +#define APM_BATTERY_STATUS_LOW 1 +#define APM_BATTERY_STATUS_CRITICAL 2 +#define APM_BATTERY_STATUS_CHARGING 3 +#define APM_BATTERY_STATUS_NOT_PRESENT 4 +#define APM_BATTERY_STATUS_UNKNOWN 0xff + +#define APM_BATTERY_LIFE_UNKNOWN 0xFFFF +#define APM_BATTERY_LIFE_MINUTES 0x8000 +#define APM_BATTERY_LIFE_VALUE_MASK 0x7FFF + +#define APM_BATTERY_FLAG_HIGH (1 << 0) +#define APM_BATTERY_FLAG_LOW (1 << 1) +#define APM_BATTERY_FLAG_CRITICAL (1 << 2) +#define APM_BATTERY_FLAG_CHARGING (1 << 3) +#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) +#define APM_BATTERY_FLAG_UNKNOWN 0xff + +#define APM_UNITS_MINS 0 +#define APM_UNITS_SECS 1 +#define APM_UNITS_UNKNOWN -1 + + +extern int (*apm_get_info)(char *buf, char **start, off_t fpos, int length); +extern int apm_suspended; + +void apm_queue_event(apm_event_t event); + +#endif diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h index fb627de217f2..8bdc1ba56f73 100644 --- a/include/asm-sh/atomic.h +++ b/include/asm-sh/atomic.h @@ -14,6 +14,7 @@ typedef struct { volatile int counter; } atomic_t; #define atomic_read(v) ((v)->counter) #define atomic_set(v,i) ((v)->counter = (i)) +#include <linux/compiler.h> #include <asm/system.h> /* @@ -21,49 +22,110 @@ typedef struct { volatile int counter; } atomic_t; * forward to code at the end of this object's .text section, then * branch back to restart the operation. */ - -static __inline__ void atomic_add(int i, atomic_t * v) +static inline void atomic_add(int i, atomic_t *v) { +#ifdef CONFIG_CPU_SH4A + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_add \n" +" add %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" + : "=&z" (tmp), "=r" (&v->counter) + : "r" (i), "r" (&v->counter) + : "t"); +#else unsigned long flags; local_irq_save(flags); *(long *)v += i; local_irq_restore(flags); +#endif } -static __inline__ void atomic_sub(int i, atomic_t *v) +static inline void atomic_sub(int i, atomic_t *v) { +#ifdef CONFIG_CPU_SH4A + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_sub \n" +" sub %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" + : "=&z" (tmp), "=r" (&v->counter) + : "r" (i), "r" (&v->counter) + : "t"); +#else unsigned long flags; local_irq_save(flags); *(long *)v -= i; local_irq_restore(flags); +#endif } -static __inline__ int atomic_add_return(int i, atomic_t * v) +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) { - unsigned long temp, flags; + unsigned long temp; + +#ifdef CONFIG_CPU_SH4A + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_add_return \n" +" add %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp), "=r" (&v->counter) + : "r" (i), "r" (&v->counter) + : "t"); +#else + unsigned long flags; local_irq_save(flags); temp = *(long *)v; temp += i; *(long *)v = temp; local_irq_restore(flags); +#endif return temp; } #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -static __inline__ int atomic_sub_return(int i, atomic_t * v) +static inline int atomic_sub_return(int i, atomic_t *v) { - unsigned long temp, flags; + unsigned long temp; + +#ifdef CONFIG_CPU_SH4A + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_sub_return \n" +" sub %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp), "=r" (&v->counter) + : "r" (i), "r" (&v->counter) + : "t"); +#else + unsigned long flags; local_irq_save(flags); temp = *(long *)v; temp -= i; *(long *)v = temp; local_irq_restore(flags); +#endif return temp; } @@ -118,22 +180,48 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v) +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { +#ifdef CONFIG_CPU_SH4A + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_clear_mask \n" +" and %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" + : "=&z" (tmp), "=r" (&v->counter) + : "r" (~mask), "r" (&v->counter) + : "t"); +#else unsigned long flags; local_irq_save(flags); *(long *)v &= ~mask; local_irq_restore(flags); +#endif } -static __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v) +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) { +#ifdef CONFIG_CPU_SH4A + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%3, %0 ! atomic_set_mask \n" +" or %2, %0 \n" +" movco.l %0, @%3 \n" +" bf 1b \n" + : "=&z" (tmp), "=r" (&v->counter) + : "r" (mask), "r" (&v->counter) + : "t"); +#else unsigned long flags; local_irq_save(flags); *(long *)v |= mask; local_irq_restore(flags); +#endif } /* Atomic operations are already serializing on SH */ diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h index fc21e4db5881..1b6916e63e90 100644 --- a/include/asm-sh/auxvec.h +++ b/include/asm-sh/auxvec.h @@ -1,4 +1,18 @@ #ifndef __ASM_SH_AUXVEC_H #define __ASM_SH_AUXVEC_H +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +#ifdef CONFIG_VSYSCALL +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + #endif /* __ASM_SH_AUXVEC_H */ diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h index e34f82508568..1c16792cee1d 100644 --- a/include/asm-sh/bitops.h +++ b/include/asm-sh/bitops.h @@ -6,7 +6,7 @@ /* For __swab32 */ #include <asm/byteorder.h> -static __inline__ void set_bit(int nr, volatile void * addr) +static inline void set_bit(int nr, volatile void * addr) { int mask; volatile unsigned int *a = addr; @@ -24,7 +24,7 @@ static __inline__ void set_bit(int nr, volatile void * addr) */ #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() -static __inline__ void clear_bit(int nr, volatile void * addr) +static inline void clear_bit(int nr, volatile void * addr) { int mask; volatile unsigned int *a = addr; @@ -37,7 +37,7 @@ static __inline__ void clear_bit(int nr, volatile void * addr) local_irq_restore(flags); } -static __inline__ void change_bit(int nr, volatile void * addr) +static inline void change_bit(int nr, volatile void * addr) { int mask; volatile unsigned int *a = addr; @@ -50,7 +50,7 @@ static __inline__ void change_bit(int nr, volatile void * addr) local_irq_restore(flags); } -static __inline__ int test_and_set_bit(int nr, volatile void * addr) +static inline int test_and_set_bit(int nr, volatile void * addr) { int mask, retval; volatile unsigned int *a = addr; @@ -66,7 +66,7 @@ static __inline__ int test_and_set_bit(int nr, volatile void * addr) return retval; } -static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +static inline int test_and_clear_bit(int nr, volatile void * addr) { int mask, retval; volatile unsigned int *a = addr; @@ -82,7 +82,7 @@ static __inline__ int test_and_clear_bit(int nr, volatile void * addr) return retval; } -static __inline__ int test_and_change_bit(int nr, volatile void * addr) +static inline int test_and_change_bit(int nr, volatile void * addr) { int mask, retval; volatile unsigned int *a = addr; @@ -100,7 +100,7 @@ static __inline__ int test_and_change_bit(int nr, volatile void * addr) #include <asm-generic/bitops/non-atomic.h> -static __inline__ unsigned long ffz(unsigned long word) +static inline unsigned long ffz(unsigned long word) { unsigned long result; @@ -120,7 +120,7 @@ static __inline__ unsigned long ffz(unsigned long word) * * Undefined if no bit exists, so code should check against 0 first. */ -static __inline__ unsigned long __ffs(unsigned long word) +static inline unsigned long __ffs(unsigned long word) { unsigned long result; diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index a6de3d06a3d9..b4000c8bf31b 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -32,6 +32,10 @@ static void __init check_bugs(void) case CPU_SH7750 ... CPU_SH4_501: *p++ = '4'; break; + case CPU_SH7770 ... CPU_SH7781: + *p++ = '4'; + *p++ = 'a'; + break; default: *p++ = '?'; *p++ = '!'; diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h index 656fdfe9e8b4..e3a180cf5062 100644 --- a/include/asm-sh/cache.h +++ b/include/asm-sh/cache.h @@ -10,7 +10,6 @@ #ifdef __KERNEL__ #include <asm/cpu/cache.h> -#include <asm/cpu/cacheflush.h> #define SH_CACHE_VALID 1 #define SH_CACHE_UPDATED 2 @@ -23,24 +22,31 @@ #define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)) struct cache_info { - unsigned int ways; - unsigned int sets; - unsigned int linesz; + unsigned int ways; /* Number of cache ways */ + unsigned int sets; /* Number of cache sets */ + unsigned int linesz; /* Cache line size (bytes) */ - unsigned int way_incr; + unsigned int way_size; /* sets * line size */ + /* + * way_incr is the address offset for accessing the next way + * in memory mapped cache array ops. + */ + unsigned int way_incr; unsigned int entry_shift; unsigned int entry_mask; + /* + * Compute a mask which selects the address bits which overlap between + * 1. those used to select the cache set during indexing + * 2. those in the physical page number. + */ + unsigned int alias_mask; + + unsigned int n_aliases; /* Number of aliases */ + unsigned long flags; }; -/* Flush (write-back only) a region (smaller than a page) */ -extern void __flush_wback_region(void *start, int size); -/* Flush (write-back & invalidate) a region (smaller than a page) */ -extern void __flush_purge_region(void *start, int size); -/* Flush (invalidate only) a region (smaller than a page) */ -extern void __flush_invalidate_region(void *start, int size); - #endif /* __KERNEL__ */ #endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h index 9dfb33edb008..07f62ec9ff0c 100644 --- a/include/asm-sh/cacheflush.h +++ b/include/asm-sh/cacheflush.h @@ -2,6 +2,7 @@ #define __ASM_SH_CACHEFLUSH_H #ifdef __KERNEL__ +#include <linux/mm.h> #include <asm/cpu/cacheflush.h> /* Flush (write-back only) a region (smaller than a page) */ @@ -27,5 +28,7 @@ extern void __flush_invalidate_region(void *start, int size); memcpy(dst, src, len); \ } while (0) +#define HAVE_ARCH_UNMAPPED_AREA + #endif /* __KERNEL__ */ #endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/include/asm-sh/cat68701/io.h b/include/asm-sh/cat68701/io.h deleted file mode 100644 index 753b8466ad11..000000000000 --- a/include/asm-sh/cat68701/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/io_cat68701.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * 2001 Yutarou Ebihar (ebihara@si-linux.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an AONE Corp. CAT-68701 SH7708 Borad - */ - -#ifndef _ASM_SH_IO_CAT68701_H -#define _ASM_SH_IO_CAT68701_H - -extern unsigned long cat68701_isa_port2addr(unsigned long offset); -extern int cat68701_irq_demux(int irq); - -extern void init_cat68701_IRQ(void); -extern void heartbeat_cat68701(void); - -#endif /* _ASM_SH_IO_CAT68701_H */ diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h index fa03b30c4269..08168afe6746 100644 --- a/include/asm-sh/checksum.h +++ b/include/asm-sh/checksum.h @@ -159,6 +159,7 @@ static __inline__ unsigned short ip_compute_csum(unsigned char * buff, int len) } #define _HAVE_ARCH_IPV6_CSUM +#ifdef CONFIG_IPV6 static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len, @@ -194,6 +195,7 @@ static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr, return csum_fold(sum); } +#endif /* * Copy and checksum to user diff --git a/include/asm-sh/cpu-features.h b/include/asm-sh/cpu-features.h new file mode 100644 index 000000000000..4bccd7c032f9 --- /dev/null +++ b/include/asm-sh/cpu-features.h @@ -0,0 +1,24 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/include/asm-sh/cpu-sh2/shmparam.h b/include/asm-sh/cpu-sh2/shmparam.h deleted file mode 100644 index 817c1821ee4b..000000000000 --- a/include/asm-sh/cpu-sh2/shmparam.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/shmparam.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_SHMPARAM_H -#define __ASM_CPU_SH2_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* __ASM_CPU_SH2_SHMPARAM_H */ - diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h index 406aa8d9b947..ffe08d2813f9 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/include/asm-sh/cpu-sh3/cache.h @@ -26,12 +26,10 @@ #define CCR_CACHE_ENABLE CCR_CACHE_CE #define CCR_CACHE_INVALIDATE CCR_CACHE_CF -#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710) #define CCR3 0xa40000b4 #define CCR_CACHE_16KB 0x00010000 #define CCR_CACHE_32KB 0x00020000 #endif - #endif /* __ASM_CPU_SH3_CACHE_H */ - diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h index f51aed00c68f..03fde97a7fd0 100644 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ b/include/asm-sh/cpu-sh3/cacheflush.h @@ -10,7 +10,7 @@ #ifndef __ASM_CPU_SH3_CACHEFLUSH_H #define __ASM_CPU_SH3_CACHEFLUSH_H -/* +/* * Cache flushing: * * - flush_cache_all() flushes entire cache @@ -35,53 +35,33 @@ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ #define CACHE_ALIAS 0x00001000 -struct page; -struct mm_struct; -struct vm_area_struct; - -extern void flush_cache_all(void); -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -extern void flush_dcache_page(struct page *pg); -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* SH3 has unified cache so no special action needed here */ -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_page_to_ram(page) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define p3_cache_init() do { } while (0) - #define PG_mapped PG_arch_1 -/* We provide our own get_unmapped_area to avoid cache alias issue */ -#define HAVE_ARCH_UNMAPPED_AREA - +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +void flush_dcache_page(struct page *pg); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); #else - #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) #define flush_cache_range(vma, start, end) do { } while (0) #define flush_cache_page(vma, vmaddr, pfn) do { } while (0) #define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) #define flush_icache_range(start, end) do { } while (0) #define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) +#endif -#define p3_cache_init() do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define HAVE_ARCH_UNMAPPED_AREA +/* SH3 has unified cache so no special action needed here */ +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#endif +#define p3_cache_init() do { } while (0) #endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ - diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h index b61b6e331df0..273f3229785c 100644 --- a/include/asm-sh/cpu-sh3/freq.h +++ b/include/asm-sh/cpu-sh3/freq.h @@ -18,5 +18,9 @@ #define MIN_DIVISOR_NR 0 #define MAX_DIVISOR_NR 4 +#define FRQCR_CKOEN 0x0100 +#define FRQCR_PLLEN 0x0080 +#define FRQCR_PSTBY 0x0040 + #endif /* __ASM_CPU_SH3_FREQ_H */ diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h index a844ea0965b6..bccb7ddb438b 100644 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ b/include/asm-sh/cpu-sh3/mmu_context.h @@ -27,8 +27,12 @@ #define TRA 0xffffffd0 #define EXPEVT 0xffffffd4 -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7300) || \ + defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) #define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ #else #define INTEVT 0xffffffd8 diff --git a/include/asm-sh/cpu-sh3/shmparam.h b/include/asm-sh/cpu-sh3/shmparam.h deleted file mode 100644 index da5b5eec81ee..000000000000 --- a/include/asm-sh/cpu-sh3/shmparam.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/shmparam.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_SHMPARAM_H -#define __ASM_CPU_SH3_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* __ASM_CPU_SH3_SHMPARAM_H */ - diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index 3d8e95e8d10c..b2394cf76f49 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -20,9 +20,14 @@ * SH7710 * SH7720 * SH7300 + * SH7710 * --------------------------------------------------------------------------- */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7727) +#define TMU_TOCR 0xfffffe90 /* Byte access */ +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) #define TMU_TSTR 0xa412fe92 /* Byte access */ @@ -39,9 +44,6 @@ #define TMU2_TCR 0xa412feb4 /* Word access */ #else -#if !defined(CONFIG_CPU_SUBTYPE_SH7727) -#define TMU_TOCR 0xfffffe90 /* Byte access */ -#endif #define TMU_TSTR 0xfffffe92 /* Byte access */ #define TMU0_TCOR 0xfffffe94 /* Long access */ diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h index 0f809dec4e17..9d308cbe9b29 100644 --- a/include/asm-sh/cpu-sh3/ubc.h +++ b/include/asm-sh/cpu-sh3/ubc.h @@ -11,6 +11,19 @@ #ifndef __ASM_CPU_SH3_UBC_H #define __ASM_CPU_SH3_UBC_H +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#define UBC_BARA 0xa4ffffb0 +#define UBC_BAMRA 0xa4ffffb4 +#define UBC_BBRA 0xa4ffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xa4ffffa0 +#define UBC_BAMRB 0xa4ffffa4 +#define UBC_BBRB 0xa4ffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xa4ffff90 +#define UBC_BDMRB 0xa4ffff94 +#define UBC_BRCR 0xa4ffff98 +#else #define UBC_BARA 0xffffffb0 #define UBC_BAMRA 0xffffffb4 #define UBC_BBRA 0xffffffb8 @@ -22,6 +35,6 @@ #define UBC_BDRB 0xffffff90 #define UBC_BDMRB 0xffffff94 #define UBC_BRCR 0xffffff98 +#endif #endif /* __ASM_CPU_SH3_UBC_H */ - diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h index 727634d886ce..bb2e1b03060c 100644 --- a/include/asm-sh/cpu-sh4/addrspace.h +++ b/include/asm-sh/cpu-sh4/addrspace.h @@ -22,5 +22,8 @@ #define P4SEG_TLB_DATA 0xf7000000 #define P4SEG_REG_BASE 0xff000000 +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ + #endif /* __ASM_CPU_SH4_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h index 1fe20359312c..6e9c7e6ee8e4 100644 --- a/include/asm-sh/cpu-sh4/cache.h +++ b/include/asm-sh/cpu-sh4/cache.h @@ -22,7 +22,9 @@ #define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ #define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ #define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ +#ifndef CONFIG_CPU_SUBTYPE_SH7780 #define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ +#endif /* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ #define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index f323567e085f..515fd574267c 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -16,40 +16,29 @@ * caching; in which case they're only semi-broken), * so we need them. */ - -/* Page is 4K, OC size is 16K, there are four lines. */ -#define CACHE_ALIAS 0x00003000 - -struct page; -struct mm_struct; -struct vm_area_struct; - -extern void flush_cache_all(void); -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -extern void flush_dcache_page(struct page *pg); +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn); +void flush_dcache_page(struct page *pg); #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_cache_sigtramp(unsigned long addr); -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, - int len); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_cache_sigtramp(unsigned long addr); +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); #define flush_icache_page(vma,pg) do { } while (0) /* Initialization of P3 area for copy_user_page */ -extern void p3_cache_init(void); +void p3_cache_init(void); #define PG_mapped PG_arch_1 -/* We provide our own get_unmapped_area to avoid cache alias issue */ -#define HAVE_ARCH_UNMAPPED_AREA - #ifdef CONFIG_MMU extern int remap_area_pages(unsigned long addr, unsigned long phys_addr, unsigned long size, unsigned long flags); @@ -61,4 +50,3 @@ static inline int remap_area_pages(unsigned long addr, unsigned long phys_addr, } #endif /* CONFIG_MMU */ #endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ - diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h new file mode 100644 index 000000000000..6c90d28331b2 --- /dev/null +++ b/include/asm-sh/cpu-sh4/dma-sh7780.h @@ -0,0 +1,39 @@ +#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H +#define __ASM_SH_CPU_SH4_DMA_SH7780_H + +#define REQ_HE 0x000000C0 +#define REQ_H 0x00000080 +#define REQ_LE 0x00000040 +#define TM_BURST 0x0000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_16BLK 0x00000018 +#define TS_32BLK 0x00100000 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int __attribute__ ((used)) ts_shift[] = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, +}; + +#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h index 0dfe61f14802..3e4b3e6d80c0 100644 --- a/include/asm-sh/cpu-sh4/dma.h +++ b/include/asm-sh/cpu-sh4/dma.h @@ -1,11 +1,17 @@ #ifndef __ASM_CPU_SH4_DMA_H #define __ASM_CPU_SH4_DMA_H +#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) + #ifdef CONFIG_CPU_SH4A #define SH_DMAC_BASE 0xfc808020 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#include <asm/cpu/dma-sh7780.h> #else #define SH_DMAC_BASE 0xffa00000 -#endif /* Definitions for the SuperH DMAC */ #define TM_BURST 0x0000080 @@ -19,8 +25,6 @@ #define DMAOR_COD 0x00000008 -#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) - /* * The SuperH DMAC supports a number of transmit sizes, we list them here, * with their respective values as they appear in the CHCR registers. @@ -45,5 +49,6 @@ static unsigned int ts_shift[] __attribute__ ((used)) = { [XMIT_SZ_32BIT] = 2, [XMIT_SZ_256BIT] = 5, }; +#endif #endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/include/asm-sh/cpu-sh4/shmparam.h b/include/asm-sh/cpu-sh4/shmparam.h deleted file mode 100644 index a5a0aa9425fe..000000000000 --- a/include/asm-sh/cpu-sh4/shmparam.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/shmparam.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_SHMPARAM_H -#define __ASM_CPU_SH4_SHMPARAM_H - -/* - * SH-4 has D-cache alias issue - */ -#define SHMLBA (PAGE_SIZE*4) /* attach addr a multiple of this */ - -#endif /* __ASM_CPU_SH4_SHMPARAM_H */ - diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h index 366b09166d3b..586d6491816a 100644 --- a/include/asm-sh/cpu-sh4/sq.h +++ b/include/asm-sh/cpu-sh4/sq.h @@ -17,7 +17,7 @@ * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be * mapped to any physical address space. Since data is written (and aligned) * to 32-byte boundaries, we need to be sure that all allocations are aligned. - */ + */ #define SQ_SIZE 32 #define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) #define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) @@ -26,23 +26,10 @@ #define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) #define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) -struct sq_mapping { - const char *name; - - unsigned long sq_addr; - unsigned long addr; - unsigned int size; - - struct list_head list; -}; - /* arch/sh/kernel/cpu/sh4/sq.c */ -extern struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name); -extern void sq_unmap(struct sq_mapping *map); - -extern void sq_clear(unsigned long addr, unsigned int len); -extern void sq_flush(void *addr); -extern void sq_flush_range(unsigned long start, unsigned int len); +unsigned long sq_remap(unsigned long phys, unsigned int size, + const char *name, unsigned long flags); +void sq_unmap(unsigned long vaddr); +void sq_flush_range(unsigned long start, unsigned int len); #endif /* __ASM_CPU_SH4_SQ_H */ - diff --git a/include/asm-sh/cqreek/cqreek.h b/include/asm-sh/cqreek/cqreek.h deleted file mode 100644 index 09aecc06693e..000000000000 --- a/include/asm-sh/cqreek/cqreek.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_CQREEK_CQREEK_H -#define __ASM_SH_CQREEK_CQREEK_H - -#define BRIDGE_FEATURE 0x0002 - -#define BRIDGE_IDE_CTRL 0x0018 -#define BRIDGE_IDE_INTR_LVL 0x001A -#define BRIDGE_IDE_INTR_MASK 0x001C -#define BRIDGE_IDE_INTR_STAT 0x001E - -#define BRIDGE_ISA_CTRL 0x0028 -#define BRIDGE_ISA_INTR_LVL 0x002A -#define BRIDGE_ISA_INTR_MASK 0x002C -#define BRIDGE_ISA_INTR_STAT 0x002E - -/* arch/sh/boards/cqreek/setup.c */ -extern void setup_cqreek(void); - -/* arch/sh/boards/cqreek/irq.c */ -extern int cqreek_has_ide, cqreek_has_isa; -extern void init_cqreek_IRQ(void); - -/* arch/sh/boards/cqreek/io.c */ -extern unsigned long cqreek_port2addr(unsigned long port); - -#endif /* __ASM_SH_CQREEK_CQREEK_H */ - diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 124968f9866e..56cd4b977232 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -141,25 +141,35 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, } } -static void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) - __attribute__ ((alias("dma_sync_single"))); +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} -static void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, enum dma_data_direction dir) - __attribute__ ((alias("dma_sync_single"))); +{ + dma_sync_sg(dev, sg, nelems, dir); +} -static void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) - __attribute__ ((alias("dma_sync_sg"))); +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} -static void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) - __attribute__ ((alias("dma_sync_sg"))); static inline int dma_get_cache_alignment(void) { @@ -174,6 +184,4 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) { return dma_addr == 0; } - #endif /* __ASM_SH_DMA_MAPPING_H */ - diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h index e62a6d0ed932..d9daa028689f 100644 --- a/include/asm-sh/dma.h +++ b/include/asm-sh/dma.h @@ -89,6 +89,7 @@ struct dma_channel { wait_queue_head_t wait_queue; struct sys_device dev; + char *name; }; struct dma_info { diff --git a/include/asm-sh/dmida/io.h b/include/asm-sh/dmida/io.h deleted file mode 100644 index 21bd416c01c3..000000000000 --- a/include/asm-sh/dmida/io.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_DMIDA_IO_H -#define __ASM_SH_DMIDA_IO_H - -/* - * Nothing special here.. just use the generic cchip io routines. - */ -#include <asm/hd64465/io.h> - -#endif /* __ASM_SH_DMIDA_IO_H */ - diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 1b63dfeea4f2..3a07ab40ac4d 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -1,6 +1,11 @@ #ifndef __ASM_SH_ELF_H #define __ASM_SH_ELF_H +#include <asm/processor.h> +#include <asm/auxvec.h> +#include <asm/ptrace.h> +#include <asm/user.h> + /* SH relocation types */ #define R_SH_NONE 0 #define R_SH_DIR32 1 @@ -46,9 +51,6 @@ * ELF register definitions.. */ -#include <asm/ptrace.h> -#include <asm/user.h> - typedef unsigned long elf_greg_t; #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) @@ -91,7 +93,7 @@ typedef struct user_fpu_struct elf_fpregset_t; instruction set this CPU supports. This could be done in user space, but it's not easy, and we've already done it here. */ -#define ELF_HWCAP (0) +#define ELF_HWCAP (boot_cpu_data.flags) /* This yields a string that ld.so will use to load implementation specific libraries for optimization. This is more specific in @@ -119,4 +121,24 @@ extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) #endif +#ifdef CONFIG_VSYSCALL +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); + +extern unsigned int vdso_enabled; +extern void __kernel_vsyscall; + +#define VDSO_BASE ((unsigned long)current->mm->context.vdso) +#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) + +#define ARCH_DLINFO \ +do { \ + if (vdso_enabled) \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ +} while (0) +#endif /* CONFIG_VSYSCALL */ + #endif /* __ASM_SH_ELF_H */ diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h index 412bccaa07e6..458e9fa59545 100644 --- a/include/asm-sh/fixmap.h +++ b/include/asm-sh/fixmap.h @@ -25,7 +25,7 @@ * addresses. The point is to have a constant address at * compile time, but to set the physical address only * in the boot process. We allocate these special addresses - * from the end of virtual memory (0xfffff000) backwards. + * from the end of P3 backwards. * Also this lets us do fail-safe vmalloc(), we * can guarantee that these special addresses and * vmalloc()-ed addresses never overlap. diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h index f29072e1c87e..0d5cc04ab005 100644 --- a/include/asm-sh/flat.h +++ b/include/asm-sh/flat.h @@ -13,7 +13,7 @@ #define __ASM_SH_FLAT_H #define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 1 +#define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) #define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp) diff --git a/include/asm-sh/harp/harp.h b/include/asm-sh/harp/harp.h deleted file mode 100644 index b2fbcfae9940..000000000000 --- a/include/asm-sh/harp/harp.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Defintions applicable to the STMicroelectronics ST40STB1 HARP and - * compatible boards. - */ - -#if defined(CONFIG_SH_STB1_HARP) - -#define EPLD_BASE 0xa0800000 - -#define EPLD_LED (EPLD_BASE+0x000c0000) -#define EPLD_INTSTAT0 (EPLD_BASE+0x00200000) -#define EPLD_INTSTAT1 (EPLD_BASE+0x00240000) -#define EPLD_INTMASK0 (EPLD_BASE+0x00280000) -#define EPLD_INTMASK1 (EPLD_BASE+0x002c0000) -#define EPLD_PAGEADDR (EPLD_BASE+0x00300000) -#define EPLD_REVID1 (EPLD_BASE+0x00380000) -#define EPLD_REVID2 (EPLD_BASE+0x003c0000) - -#define EPLD_LED_ON 1 -#define EPLD_LED_OFF 0 - -#elif defined(CONFIG_SH_STB1_OVERDRIVE) - -#define EPLD_BASE 0xa7000000 - -#define EPLD_REVID (EPLD_BASE+0x00000000) -#define EPLD_LED (EPLD_BASE+0x00040000) -#define EPLD_INTMASK0 (EPLD_BASE+0x001c0000) -#define EPLD_INTMASK1 (EPLD_BASE+0x00200000) -#define EPLD_INTSTAT0 (EPLD_BASE+0x00240000) -#define EPLD_INTSTAT1 (EPLD_BASE+0x00280000) - -#define EPLD_LED_ON 0 -#define EPLD_LED_OFF 1 - -#else -#error Unknown board -#endif diff --git a/include/asm-sh/harp/io.h b/include/asm-sh/harp/io.h deleted file mode 100644 index 68f39e0b39de..000000000000 --- a/include/asm-sh/harp/io.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_HARP_IO_H -#define __ASM_SH_HARP_IO_H - -/* - * Nothing special here.. just use the generic cchip io routines. - */ -#include <asm/hd64465/io.h> - -#endif /* __ASM_SH_HARP_IO_H */ - diff --git a/include/asm-sh/hd64461/hd64461.h b/include/asm-sh/hd64461.h index 87f13d24c630..27e5c34e2659 100644 --- a/include/asm-sh/hd64461/hd64461.h +++ b/include/asm-sh/hd64461.h @@ -40,7 +40,12 @@ #define HD64461_LCDCBAR 0x11000 #define HD64461_LCDCLOR 0x11002 #define HD64461_LCDCCR 0x11004 -#define HD64461_LCDCCR_MOFF 0x80 +#define HD64461_LCDCCR_STBACK 0x0400 +#define HD64461_LCDCCR_STREQ 0x0100 +#define HD64461_LCDCCR_MOFF 0x0080 +#define HD64461_LCDCCR_REFSEL 0x0040 +#define HD64461_LCDCCR_EPON 0x0020 +#define HD64461_LCDCCR_SPON 0x0010 #define HD64461_LDR1 0x11010 #define HD64461_LDR1_DON 0x01 @@ -54,9 +59,9 @@ #define HD64461_LDVSPR 0x1101c #define HD64461_LDR3 0x1101e -#define HD64461_CPTWAR 0x11030 +#define HD64461_CPTWAR 0x11030 #define HD64461_CPTWDR 0x11032 -#define HD64461_CPTRAR 0x11034 +#define HD64461_CPTRAR 0x11034 #define HD64461_CPTRDR 0x11036 #define HD64461_GRDOR 0x11040 @@ -111,7 +116,7 @@ #define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ #define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ +#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ #define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ #define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ #define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ @@ -139,11 +144,11 @@ /* PCC Card Status Change Interrupt Enable Register */ #define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ -#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ +#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ #define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ #define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ +#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ #define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ #define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ @@ -155,7 +160,6 @@ #define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ #define HD64461_PCCSCR_SWP 0x01 /* write protect */ - #define HD64461_P0OCR 0x1202a #define HD64461_P1OCR 0x1202c #define HD64461_PGCR 0x1202e @@ -180,23 +184,25 @@ #define HD64461_NIRR 0x15000 #define HD64461_NIMR 0x15002 -#ifndef CONFIG_HD64461_IOBASE -#define CONFIG_HD64461_IOBASE 0xb0000000 -#endif -#ifndef CONFIG_HD64461_IRQ -#define CONFIG_HD64461_IRQ 36 -#endif - #define HD64461_IRQBASE OFFCHIP_IRQ_BASE -#define HD64461_IRQ_NUM 16 - -#define HD64461_IRQ_UART (HD64461_IRQBASE+5) -#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) -#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) -#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) -#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) -#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) -#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) -#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) +#define HD64461_IRQ_NUM 16 + +#define HD64461_IRQ_UART (HD64461_IRQBASE+5) +#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) +#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) +#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) +#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) +#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) +#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) +#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) + +#define __IO_PREFIX hd64461 +#include <asm/io_generic.h> + +/* arch/sh/cchips/hd6446x/hd64461/setup.c */ +int hd64461_irq_demux(int irq); +void hd64461_register_irq_demux(int irq, + int (*demux) (int irq, void *dev), void *dev); +void hd64461_unregister_irq_demux(int irq); #endif diff --git a/include/asm-sh/hd64461/io.h b/include/asm-sh/hd64461/io.h deleted file mode 100644 index 67f2489088d9..000000000000 --- a/include/asm-sh/hd64461/io.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/io_hd64461.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an HD64461 - */ - -#ifndef _ASM_SH_IO_HD64461_H -#define _ASM_SH_IO_HD64461_H - -extern unsigned char hd64461_inb(unsigned long port); -extern unsigned short hd64461_inw(unsigned long port); -extern unsigned int hd64461_inl(unsigned long port); - -extern void hd64461_outb(unsigned char value, unsigned long port); -extern void hd64461_outw(unsigned short value, unsigned long port); -extern void hd64461_outl(unsigned int value, unsigned long port); - -extern unsigned char hd64461_inb_p(unsigned long port); -extern void hd64461_outb_p(unsigned char value, unsigned long port); - -extern void hd64461_insb(unsigned long port, void *addr, unsigned long count); -extern void hd64461_insw(unsigned long port, void *addr, unsigned long count); -extern void hd64461_insl(unsigned long port, void *addr, unsigned long count); - -extern void hd64461_outsb(unsigned long port, const void *buffer, unsigned long count); -extern void hd64461_outsw(unsigned long port, const void *buffer, unsigned long count); -extern void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count); - -extern unsigned short hd64461_readw(unsigned long addr); -extern void hd64461_writew(unsigned short b, unsigned long addr); - - -extern int hd64461_irq_demux(int irq); -extern void hd64461_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void hd64461_unregister_irq_demux(int irq); - -#endif /* _ASM_SH_IO_HD64461_H */ diff --git a/include/asm-sh/hp6xx/hp6xx.h b/include/asm-sh/hp6xx/hp6xx.h index a26247fd3d87..f35134c159dd 100644 --- a/include/asm-sh/hp6xx/hp6xx.h +++ b/include/asm-sh/hp6xx/hp6xx.h @@ -2,16 +2,33 @@ #define __ASM_SH_HP6XX_H /* - * Copyright (C) 2003 Andriy Skulysh + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * */ -#define HP680_TS_IRQ IRQ3_IRQ +#define HP680_BTN_IRQ IRQ0_IRQ +#define HP680_TS_IRQ IRQ3_IRQ +#define HP680_HD64461_IRQ IRQ4_IRQ #define DAC_LCD_BRIGHTNESS 0 #define DAC_SPEAKER_VOLUME 1 +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + #define PHDR_TS_PEN_DOWN 0x08 +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + #define SCPDR_TS_SCAN_ENABLE 0x20 #define SCPDR_TS_SCAN_Y 0x02 #define SCPDR_TS_SCAN_X 0x01 @@ -21,11 +38,43 @@ #define ADC_CHANNEL_TS_Y 1 #define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 #define HD64461_GPADR_SPEAKER 0x01 #define HD64461_GPADR_PCMCIA0 (0x02|0x08) + #define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 #define HD64461_GPBDR_LED_RED 0x80 +#include <asm/hd64461.h> +#include <asm/io.h> + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +static inline void hp6xx_led_red(int on) +{ + u16 v16; + v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); + if (on) + ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); + else + ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000); +} + +static inline void hp6xx_led_green(int on) +{ + u8 v8; + + v8 = ctrl_inb(PKDR); + if (on) + ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR); + else + ctrl_outb(v8 | PKDR_LED_GREEN, PKDR); +} + #endif /* __ASM_SH_HP6XX_H */ diff --git a/include/asm-sh/hp6xx/io.h b/include/asm-sh/hp6xx/io.h index 731798003550..2044476ab199 100644 --- a/include/asm-sh/hp6xx/io.h +++ b/include/asm-sh/hp6xx/io.h @@ -4,7 +4,7 @@ /* * Nothing special here.. just use the generic cchip io routines. */ -#include <asm/hd64461/io.h> +#include <asm/hd64461.h> #endif /* __ASM_SH_HP6XX_IO_H */ diff --git a/include/asm-sh/hs7751rvoip/hs7751rvoip.h b/include/asm-sh/hs7751rvoip/hs7751rvoip.h index 5f995f937a44..c4cff9d33927 100644 --- a/include/asm-sh/hs7751rvoip/hs7751rvoip.h +++ b/include/asm-sh/hs7751rvoip/hs7751rvoip.h @@ -19,8 +19,6 @@ #define PA_OUTPORTR 0xa400000e /* Output Port Reguster */ #define PA_VERREG 0xa4000014 /* FPGA Version Register */ -#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ -#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ #define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ #define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ @@ -44,4 +42,13 @@ #define IRQ_RINGING 4 /* Ringing IRQ */ #define IRQ_CODEC 5 /* CODEC IRQ */ +#define __IO_PREFIX hs7751rvoip +#include <asm/io_generic.h> + +/* arch/sh/boards/renesas/hs7751rvoip/irq.c */ +void init_hs7751rvoip_IRQ(void); + +/* arch/sh/boards/renesas/hs7751rvoip/io.c */ +void *hs7751rvoip_ioremap(unsigned long, unsigned long); + #endif /* __ASM_SH_RENESAS_HS7751RVOIP */ diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 894e64b2d5f0..ed12d38e8c00 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -107,6 +107,9 @@ #define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) #define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) +void __raw_writesl(unsigned long addr, const void *data, int longlen); +void __raw_readsl(unsigned long addr, void *data, int longlen); + /* * The platform header files may define some of these macros to use * the inlined versions where appropriate. These macros may also be @@ -132,6 +135,9 @@ # define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) #endif +#define writesl __raw_writesl +#define readsl __raw_readsl + #define readb_relaxed(a) readb(a) #define readw_relaxed(a) readw(a) #define readl_relaxed(a) readl(a) @@ -209,8 +215,14 @@ static inline void ctrl_outl(unsigned int b, unsigned long addr) *(volatile unsigned long*)addr = b; } +static inline void ctrl_delay(void) +{ + ctrl_inw(P2SEG); +} + #define IO_SPACE_LIMIT 0xffffffff +#ifdef CONFIG_MMU /* * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/SuperH mapping @@ -224,6 +236,10 @@ static inline void *phys_to_virt(unsigned long address) { return (void *)P1SEGADDR(address); } +#else +#define phys_to_virt(address) ((void *)(address)) +#define virt_to_phys(address) ((unsigned long)(address)) +#endif #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h index d705252be260..b28af9a69d72 100644 --- a/include/asm-sh/irq-sh73180.h +++ b/include/asm-sh/irq-sh73180.h @@ -311,6 +311,4 @@ #define IRQ6_PRIORITY 1 #define IRQ7_PRIORITY 1 -int shmse_irq_demux(int irq); - #endif /* __ASM_SH_IRQ_SH73180_H */ diff --git a/include/asm-sh/irq-sh7343.h b/include/asm-sh/irq-sh7343.h new file mode 100644 index 000000000000..5d15419b53b0 --- /dev/null +++ b/include/asm-sh/irq-sh7343.h @@ -0,0 +1,317 @@ +#ifndef __ASM_SH_IRQ_SH7343_H +#define __ASM_SH_IRQ_SH7343_H + +/* + * linux/include/asm-sh/irq-sh7343.h + * + * Copyright (C) 2006 Kenati Technologies Inc. + * Andre Mccurdy <andre@kenati.com> + * Ranjit Deshpande <ranjit@kenati.com> + */ + +#undef INTC_IPRA +#undef INTC_IPRB +#undef INTC_IPRC +#undef INTC_IPRD + +#undef DMTE0_IRQ +#undef DMTE1_IRQ +#undef DMTE2_IRQ +#undef DMTE3_IRQ +#undef DMTE4_IRQ +#undef DMTE5_IRQ +#undef DMTE6_IRQ +#undef DMTE7_IRQ +#undef DMAE_IRQ +#undef DMA_IPR_ADDR +#undef DMA_IPR_POS +#undef DMA_PRIORITY + +#undef INTC_IMCR0 +#undef INTC_IMCR1 +#undef INTC_IMCR2 +#undef INTC_IMCR3 +#undef INTC_IMCR4 +#undef INTC_IMCR5 +#undef INTC_IMCR6 +#undef INTC_IMCR7 +#undef INTC_IMCR8 +#undef INTC_IMCR9 +#undef INTC_IMCR10 + + +#define INTC_IPRA 0xA4080000UL +#define INTC_IPRB 0xA4080004UL +#define INTC_IPRC 0xA4080008UL +#define INTC_IPRD 0xA408000CUL +#define INTC_IPRE 0xA4080010UL +#define INTC_IPRF 0xA4080014UL +#define INTC_IPRG 0xA4080018UL +#define INTC_IPRH 0xA408001CUL +#define INTC_IPRI 0xA4080020UL +#define INTC_IPRJ 0xA4080024UL +#define INTC_IPRK 0xA4080028UL +#define INTC_IPRL 0xA408002CUL + +#define INTC_IMR0 0xA4080080UL +#define INTC_IMR1 0xA4080084UL +#define INTC_IMR2 0xA4080088UL +#define INTC_IMR3 0xA408008CUL +#define INTC_IMR4 0xA4080090UL +#define INTC_IMR5 0xA4080094UL +#define INTC_IMR6 0xA4080098UL +#define INTC_IMR7 0xA408009CUL +#define INTC_IMR8 0xA40800A0UL +#define INTC_IMR9 0xA40800A4UL +#define INTC_IMR10 0xA40800A8UL +#define INTC_IMR11 0xA40800ACUL + +#define INTC_IMCR0 0xA40800C0UL +#define INTC_IMCR1 0xA40800C4UL +#define INTC_IMCR2 0xA40800C8UL +#define INTC_IMCR3 0xA40800CCUL +#define INTC_IMCR4 0xA40800D0UL +#define INTC_IMCR5 0xA40800D4UL +#define INTC_IMCR6 0xA40800D8UL +#define INTC_IMCR7 0xA40800DCUL +#define INTC_IMCR8 0xA40800E0UL +#define INTC_IMCR9 0xA40800E4UL +#define INTC_IMCR10 0xA40800E8UL +#define INTC_IMCR11 0xA40800ECUL + +#define INTC_ICR0 0xA4140000UL +#define INTC_ICR1 0xA414001CUL + +#define INTMSK0 0xa4140044 +#define INTMSKCLR0 0xa4140064 +#define INTC_INTPRI0 0xa4140010 + +/* + NOTE: + + *_IRQ = (INTEVT2 - 0x200)/0x20 +*/ + +/* TMU0 */ +#define TMU0_IRQ 16 +#define TMU0_IPR_ADDR INTC_IPRA +#define TMU0_IPR_POS 3 +#define TMU0_PRIORITY 2 + +#define TIMER_IRQ 16 +#define TIMER_IPR_ADDR INTC_IPRA +#define TIMER_IPR_POS 3 +#define TIMER_PRIORITY 2 + +/* TMU1 */ +#define TMU1_IRQ 17 +#define TMU1_IPR_ADDR INTC_IPRA +#define TMU1_IPR_POS 2 +#define TMU1_PRIORITY 2 + +/* TMU2 */ +#define TMU2_IRQ 18 +#define TMU2_IPR_ADDR INTC_IPRA +#define TMU2_IPR_POS 1 +#define TMU2_PRIORITY 2 + +/* LCDC */ +#define LCDC_IRQ 28 +#define LCDC_IPR_ADDR INTC_IPRB +#define LCDC_IPR_POS 2 +#define LCDC_PRIORITY 2 + +/* VIO (Video I/O) */ +#define CEU_IRQ 52 +#define BEU_IRQ 53 +#define VEU_IRQ 54 +#define VOU_IRQ 55 +#define VIO_IPR_ADDR INTC_IPRE +#define VIO_IPR_POS 2 +#define VIO_PRIORITY 2 + +/* MFI (Multi Functional Interface) */ +#define MFI_IRQ 56 +#define MFI_IPR_ADDR INTC_IPRE +#define MFI_IPR_POS 1 +#define MFI_PRIORITY 2 + +/* VPU (Video Processing Unit) */ +#define VPU_IRQ 60 +#define VPU_IPR_ADDR INTC_IPRE +#define VPU_IPR_POS 0 +#define VPU_PRIORITY 2 + +/* 3DG */ +#define TDG_IRQ 63 +#define TDG_IPR_ADDR INTC_IPRJ +#define TDG_IPR_POS 2 +#define TDG_PRIORITY 2 + +/* DMAC(1) */ +#define DMTE0_IRQ 48 +#define DMTE1_IRQ 49 +#define DMTE2_IRQ 50 +#define DMTE3_IRQ 51 +#define DMA1_IPR_ADDR INTC_IPRE +#define DMA1_IPR_POS 3 +#define DMA1_PRIORITY 7 + +/* DMAC(2) */ +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 +#define DMA2_IPR_ADDR INTC_IPRF +#define DMA2_IPR_POS 2 +#define DMA2_PRIORITY 7 + +/* SCIF0 */ +#define SCIF_ERI_IRQ 80 +#define SCIF_RXI_IRQ 81 +#define SCIF_BRI_IRQ 82 +#define SCIF_TXI_IRQ 83 +#define SCIF_IPR_ADDR INTC_IPRG +#define SCIF_IPR_POS 3 +#define SCIF_PRIORITY 3 + +/* SIOF0 */ +#define SIOF0_IRQ 84 +#define SIOF0_IPR_ADDR INTC_IPRH +#define SIOF0_IPR_POS 3 +#define SIOF0_PRIORITY 3 + +/* FLCTL (Flash Memory Controller) */ +#define FLSTE_IRQ 92 +#define FLTEND_IRQ 93 +#define FLTRQ0_IRQ 94 +#define FLTRQ1_IRQ 95 +#define FLCTL_IPR_ADDR INTC_IPRH +#define FLCTL_IPR_POS 1 +#define FLCTL_PRIORITY 3 + +/* IIC(0) (IIC Bus Interface) */ +#define IIC0_ALI_IRQ 96 +#define IIC0_TACKI_IRQ 97 +#define IIC0_WAITI_IRQ 98 +#define IIC0_DTEI_IRQ 99 +#define IIC0_IPR_ADDR INTC_IPRH +#define IIC0_IPR_POS 0 +#define IIC0_PRIORITY 3 + +/* IIC(1) (IIC Bus Interface) */ +#define IIC1_ALI_IRQ 44 +#define IIC1_TACKI_IRQ 45 +#define IIC1_WAITI_IRQ 46 +#define IIC1_DTEI_IRQ 47 +#define IIC1_IPR_ADDR INTC_IPRI +#define IIC1_IPR_POS 0 +#define IIC1_PRIORITY 3 + +/* SIO0 */ +#define SIO0_IRQ 88 +#define SIO0_IPR_ADDR INTC_IPRI +#define SIO0_IPR_POS 3 +#define SIO0_PRIORITY 3 + +/* SDHI */ +#define SDHI_SDHII0_IRQ 100 +#define SDHI_SDHII1_IRQ 101 +#define SDHI_SDHII2_IRQ 102 +#define SDHI_SDHII3_IRQ 103 +#define SDHI_IPR_ADDR INTC_IPRK +#define SDHI_IPR_POS 0 +#define SDHI_PRIORITY 3 + +/* SIU (Sound Interface Unit) */ +#define SIU_IRQ 108 +#define SIU_IPR_ADDR INTC_IPRJ +#define SIU_IPR_POS 1 +#define SIU_PRIORITY 3 + +#define PORT_PACR 0xA4050100UL +#define PORT_PBCR 0xA4050102UL +#define PORT_PCCR 0xA4050104UL +#define PORT_PDCR 0xA4050106UL +#define PORT_PECR 0xA4050108UL +#define PORT_PFCR 0xA405010AUL +#define PORT_PGCR 0xA405010CUL +#define PORT_PHCR 0xA405010EUL +#define PORT_PJCR 0xA4050110UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PLCR 0xA4050114UL +#define PORT_SCPCR 0xA4050116UL +#define PORT_PMCR 0xA4050118UL +#define PORT_PNCR 0xA405011AUL +#define PORT_PQCR 0xA405011CUL +#define PORT_PRCR 0xA405011EUL +#define PORT_PTCR 0xA405014CUL +#define PORT_PUCR 0xA405014EUL +#define PORT_PVCR 0xA4050150UL + +#define PORT_PSELA 0xA4050140UL +#define PORT_PSELB 0xA4050142UL +#define PORT_PSELC 0xA4050144UL +#define PORT_PSELE 0xA4050158UL + +#define PORT_HIZCRA 0xA4050146UL +#define PORT_HIZCRB 0xA4050148UL +#define PORT_DRVCR 0xA405014AUL + +#define PORT_PADR 0xA4050120UL +#define PORT_PBDR 0xA4050122UL +#define PORT_PCDR 0xA4050124UL +#define PORT_PDDR 0xA4050126UL +#define PORT_PEDR 0xA4050128UL +#define PORT_PFDR 0xA405012AUL +#define PORT_PGDR 0xA405012CUL +#define PORT_PHDR 0xA405012EUL +#define PORT_PJDR 0xA4050130UL +#define PORT_PKDR 0xA4050132UL +#define PORT_PLDR 0xA4050134UL +#define PORT_SCPDR 0xA4050136UL +#define PORT_PMDR 0xA4050138UL +#define PORT_PNDR 0xA405013AUL +#define PORT_PQDR 0xA405013CUL +#define PORT_PRDR 0xA405013EUL +#define PORT_PTDR 0xA405016CUL +#define PORT_PUDR 0xA405016EUL +#define PORT_PVDR 0xA4050170UL + +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ2_IRQ 34 +#define IRQ3_IRQ 35 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 +#define IRQ6_IRQ 38 +#define IRQ7_IRQ 39 + +#define INTPRI00 0xA4140010UL + +#define IRQ0_IPR_ADDR INTPRI00 +#define IRQ1_IPR_ADDR INTPRI00 +#define IRQ2_IPR_ADDR INTPRI00 +#define IRQ3_IPR_ADDR INTPRI00 +#define IRQ4_IPR_ADDR INTPRI00 +#define IRQ5_IPR_ADDR INTPRI00 +#define IRQ6_IPR_ADDR INTPRI00 +#define IRQ7_IPR_ADDR INTPRI00 + +#define IRQ0_IPR_POS 7 +#define IRQ1_IPR_POS 6 +#define IRQ2_IPR_POS 5 +#define IRQ3_IPR_POS 4 +#define IRQ4_IPR_POS 3 +#define IRQ5_IPR_POS 2 +#define IRQ6_IPR_POS 1 +#define IRQ7_IPR_POS 0 + +#define IRQ0_PRIORITY 1 +#define IRQ1_PRIORITY 1 +#define IRQ2_PRIORITY 1 +#define IRQ3_PRIORITY 1 +#define IRQ4_PRIORITY 1 +#define IRQ5_PRIORITY 1 +#define IRQ6_PRIORITY 1 +#define IRQ7_PRIORITY 1 + +#endif /* __ASM_SH_IRQ_SH7343_H */ diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h index 7f90315cd830..895c5780e454 100644 --- a/include/asm-sh/irq-sh7780.h +++ b/include/asm-sh/irq-sh7780.h @@ -145,11 +145,6 @@ #define TMU_CH5_IPR_POS 1 #define TMU_CH5_PRIORITY 2 -#define RTC_IRQ 22 -#define RTC_IPR_ADDR INTC_INT2PRI1 -#define RTC_IPR_POS 0 -#define RTC_PRIORITY TIMER_PRIORITY - /* SCIF0 */ #define SCIF0_ERI_IRQ 40 #define SCIF0_RXI_IRQ 41 diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index 611e67cd0627..0e5f365aff70 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -192,7 +192,7 @@ #if defined (CONFIG_CPU_SUBTYPE_SH7707) || defined (CONFIG_CPU_SUBTYPE_SH7708) || \ defined (CONFIG_CPU_SUBTYPE_SH7709) || defined (CONFIG_CPU_SUBTYPE_SH7750) || \ - defined (CONFIG_CPU_SUBTYPE_SH7751) + defined (CONFIG_CPU_SUBTYPE_SH7751) || defined (CONFIG_CPU_SUBTYPE_SH7706) #define SCI_ERI_IRQ 23 #define SCI_RXI_IRQ 24 #define SCI_TXI_IRQ 25 @@ -207,6 +207,7 @@ #define SCIF0_IPR_POS 3 #define SCIF0_PRIORITY 3 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) #define SCIF_ERI_IRQ 56 @@ -261,9 +262,12 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7708) # define ONCHIP_NR_IRQS 32 #elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7705) # define ONCHIP_NR_IRQS 64 // Actually 61 # define PINT_NR_IRQS 16 +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) +# define ONCHIP_NR_IRQS 104 #elif defined(CONFIG_CPU_SUBTYPE_SH7750) # define ONCHIP_NR_IRQS 48 // Actually 44 #elif defined(CONFIG_CPU_SUBTYPE_SH7751) @@ -275,7 +279,8 @@ #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) # define ONCHIP_NR_IRQS 144 #elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH73180) + defined(CONFIG_CPU_SUBTYPE_SH73180) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) # define ONCHIP_NR_IRQS 109 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define ONCHIP_NR_IRQS 111 @@ -311,6 +316,8 @@ # define OFFCHIP_NR_IRQS 4 #elif defined(CONFIG_SH_R7780RP) # define OFFCHIP_NR_IRQS 16 +#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE) +# define OFFCHIP_NR_IRQS 12 #elif defined(CONFIG_SH_UNKNOWN) # define OFFCHIP_NR_IRQS 16 /* Must also be last */ #else @@ -335,6 +342,11 @@ extern void make_maskreg_irq(unsigned int irq); extern unsigned short *irq_mask_register; /* + * PINT IRQs + */ +void init_IRQ_pint(void); + +/* * Function for "on chip support modules". */ extern void make_ipr_irq(unsigned int irq, unsigned int addr, @@ -471,8 +483,10 @@ extern int ipr_irq_demux(int irq); #define INTC_ICR 0xfffffee0UL #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) #define INTC_IRR0 0xa4000004UL #define INTC_IRR1 0xa4000006UL #define INTC_IRR2 0xa4000008UL @@ -491,8 +505,105 @@ extern int ipr_irq_demux(int irq); #define INTC_IPRF 0xa4080000UL #define INTC_IPRG 0xa4080002UL #define INTC_IPRH 0xa4080004UL -#endif +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) +/* Interrupt Controller Registers */ +#undef INTC_IPRA +#undef INTC_IPRB +#define INTC_IPRA 0xA414FEE2UL +#define INTC_IPRB 0xA414FEE4UL +#define INTC_IPRF 0xA4080000UL +#define INTC_IPRG 0xA4080002UL +#define INTC_IPRH 0xA4080004UL +#define INTC_IPRI 0xA4080006UL + +#undef INTC_ICR0 +#undef INTC_ICR1 +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL + +#define INTC_IRR0 0xa4000004UL +#define INTC_IRR1 0xa4000006UL +#define INTC_IRR2 0xa4000008UL +#define INTC_IRR3 0xa400000AUL +#define INTC_IRR4 0xa400000CUL +#define INTC_IRR5 0xa4080020UL +#define INTC_IRR7 0xa4080024UL +#define INTC_IRR8 0xa4080026UL + +/* Interrupt numbers */ +#define TIMER2_IRQ 18 +#define TIMER2_IPR_ADDR INTC_IPRA +#define TIMER2_IPR_POS 1 +#define TIMER2_PRIORITY 2 + +/* WDT */ +#define WDT_IRQ 27 +#define WDT_IPR_ADDR INTC_IPRB +#define WDT_IPR_POS 3 +#define WDT_PRIORITY 2 + +#define SCIF0_ERI_IRQ 52 +#define SCIF0_RXI_IRQ 53 +#define SCIF0_BRI_IRQ 54 +#define SCIF0_TXI_IRQ 55 +#define SCIF0_IPR_ADDR INTC_IPRE +#define SCIF0_IPR_POS 2 +#define SCIF0_PRIORITY 3 + +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 +#define DMA2_IPR_ADDR INTC_IPRF +#define DMA2_IPR_POS 2 +#define DMA2_PRIORITY 7 +#define IPSEC_IRQ 79 +#define IPSEC_IPR_ADDR INTC_IPRF +#define IPSEC_IPR_POS 3 +#define IPSEC_PRIORITY 3 + +/* EDMAC */ +#define EDMAC0_IRQ 80 +#define EDMAC0_IPR_ADDR INTC_IPRG +#define EDMAC0_IPR_POS 3 +#define EDMAC0_PRIORITY 3 + +#define EDMAC1_IRQ 81 +#define EDMAC1_IPR_ADDR INTC_IPRG +#define EDMAC1_IPR_POS 2 +#define EDMAC1_PRIORITY 3 + +#define EDMAC2_IRQ 82 +#define EDMAC2_IPR_ADDR INTC_IPRG +#define EDMAC2_IPR_POS 1 +#define EDMAC2_PRIORITY 3 + +/* SIOF */ +#define SIOF0_ERI_IRQ 96 +#define SIOF0_TXI_IRQ 97 +#define SIOF0_RXI_IRQ 98 +#define SIOF0_CCI_IRQ 99 +#define SIOF0_IPR_ADDR INTC_IPRH +#define SIOF0_IPR_POS 0 +#define SIOF0_PRIORITY 7 + +#define SIOF1_ERI_IRQ 100 +#define SIOF1_TXI_IRQ 101 +#define SIOF1_RXI_IRQ 102 +#define SIOF1_CCI_IRQ 103 +#define SIOF1_IPR_ADDR INTC_IPRI +#define SIOF1_IPR_POS 1 +#define SIOF1_PRIORITY 7 +#endif /* CONFIG_CPU_SUBTYPE_SH7710 */ + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#define PORT_PACR 0xa4050100UL +#define PORT_PBCR 0xa4050102UL +#define PORT_PCCR 0xa4050104UL +#define PORT_PETCR 0xa4050106UL +#define PORT_PADR 0xa4050120UL +#define PORT_PBDR 0xa4050122UL +#define PORT_PCDR 0xa4050124UL +#else #define PORT_PACR 0xa4000100UL #define PORT_PBCR 0xa4000102UL #define PORT_PCCR 0xa4000104UL @@ -501,6 +612,7 @@ extern int ipr_irq_demux(int irq); #define PORT_PBDR 0xa4000122UL #define PORT_PCDR 0xa4000124UL #define PORT_PFDR 0xa400012aUL +#endif #define IRQ0_IRQ 32 #define IRQ1_IRQ 33 @@ -577,7 +689,7 @@ extern int ipr_irq_demux(int irq); #define NR_INTC2_IRQS 64 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) #define INTC2_BASE 0xffd40000 -#define INTC2_FIRST_IRQ 22 +#define INTC2_FIRST_IRQ 21 #define INTC2_INTMSK_OFFSET (0x38) #define INTC2_INTMSKCLR_OFFSET (0x3c) #define NR_INTC2_IRQS 60 @@ -594,6 +706,8 @@ void intc2_add_clear_irq(int irq, int (*fn)(int)); #endif +extern int shmse_irq_demux(int irq); + static inline int generic_irq_demux(int irq) { return irq; @@ -605,8 +719,21 @@ static inline int generic_irq_demux(int irq) #define irq_canonicalize(irq) (irq) #define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq)) +#ifdef CONFIG_4KSTACKS +extern void irq_ctx_init(int cpu); +extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH73180) #include <asm/irq-sh73180.h> #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7343) +#include <asm/irq-sh7343.h> +#endif + #endif /* __ASM_SH_IRQ_H */ diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h index 9dfe59f6fcb5..9d235af20cdd 100644 --- a/include/asm-sh/kexec.h +++ b/include/asm-sh/kexec.h @@ -23,11 +23,10 @@ /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_SH -#ifndef __ASSEMBLY__ +#define MAX_NOTE_BYTES 1024 -extern void machine_shutdown(void); -extern void *crash_notes; - -#endif /* __ASSEMBLY__ */ +/* Provide a dummy definition to avoid build failures. */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } #endif /* _SH_KEXEC_H */ diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h index 1653ffb75fbe..7b26f53fe343 100644 --- a/include/asm-sh/kgdb.h +++ b/include/asm-sh/kgdb.h @@ -128,4 +128,19 @@ extern int setjmp(jmp_buf __jmpb); #define KGDB_ASSERT(condition, message) #endif +/* Taken from sh-stub.c of GDB 4.18 */ +static const char hexchars[] = "0123456789abcdef"; + +/* Get high hex bits */ +static inline char highhex(const int x) +{ + return hexchars[(x >> 4) & 0xf]; +} + +/* Get low hex bits */ +static inline char lowhex(const int x) +{ + return hexchars[x & 0xf]; +} + #endif diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h new file mode 100644 index 000000000000..3fce4c451a46 --- /dev/null +++ b/include/asm-sh/landisk/gio.h @@ -0,0 +1,45 @@ +#ifndef __ASM_SH_LANDISK_GIO_H +#define __ASM_SH_LANDISK_GIO_H + +#include <linux/ioctl.h> + +/* version */ +#define VERSION_STR "1.00" + +/* Driver name */ +#define GIO_DRIVER_NAME "/dev/giodrv" + +/* Use 'k' as magic number */ +#define GIODRV_IOC_MAGIC 'k' + +#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) +/* + * S means "Set" through a ptr, + * T means "Tell" directly + * G means "Get" (to a pointed var) + * Q means "Query", response is on the return value + * X means "eXchange": G and S atomically + * H means "sHift": T and Q atomically + */ +#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) +#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) +#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) +#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) +#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) +#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) +#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) +#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ + +#define GIODRV_IOCSGIO_LED _IOW(GIODRV_IOC_MAGIC, 9, unsigned long *) +#define GIODRV_IOCGGIO_LED _IOR(GIODRV_IOC_MAGIC, 10, unsigned long *) +#define GIODRV_IOCSGIO_BUZZER _IOW(GIODRV_IOC_MAGIC, 11, unsigned long *) +#define GIODRV_IOCGGIO_LANDISK _IOR(GIODRV_IOC_MAGIC, 14, unsigned long *) +#define GIODRV_IOCGGIO_BTN _IOR(GIODRV_IOC_MAGIC, 22, unsigned long *) +#define GIODRV_IOCSGIO_BTNPID _IOW(GIODRV_IOC_MAGIC, 23, unsigned long *) +#define GIODRV_IOCGGIO_BTNPID _IOR(GIODRV_IOC_MAGIC, 24, unsigned long *) + +#define GIODRV_IOC_MAXNR 8 +#define GIO_READ 0x00000000 +#define GIO_WRITE 0x00000001 + +#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/include/asm-sh/landisk/ide.h b/include/asm-sh/landisk/ide.h new file mode 100644 index 000000000000..6490e28415ed --- /dev/null +++ b/include/asm-sh/landisk/ide.h @@ -0,0 +1,14 @@ +/* + * modifed by kogiidena + * 2005.03.03 + */ + +#ifndef __ASM_SH_LANDISK_IDE_H +#define __ASM_SH_LANDISK_IDE_H + +/* Nothing to see here.. */ +#include <asm/landisk/iodata_landisk.h> +#define IRQ_CFCARD IRQ_FATA /* CF Card IRQ */ +#define IRQ_PCMCIA IRQ_ATA /* PCMCIA IRQ */ + +#endif /* __ASM_SH_LANDISK_IDE_H */ diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h new file mode 100644 index 000000000000..c74d3c73f377 --- /dev/null +++ b/include/asm-sh/landisk/iodata_landisk.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_IODATA_LANDISK_H +#define __ASM_SH_IODATA_LANDISK_H + +/* + * linux/include/asm-sh/landisk/iodata_landisk.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * IO-DATA LANDISK support + */ + +/* Box specific addresses. */ + +#define PA_USB 0xa4000000 /* USB Controller M66590 */ + +#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ +#define PA_LED 0xb0000001 /* LED Control Register */ +#define PA_STATUS 0xb0000002 /* Switch Status Register */ +#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ +#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ +#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ +/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ +#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ + +#define PA_LCD_CLRDSP 0x00 /* LCD Clear Display Offset */ +#define PA_LCD_RTNHOME 0x00 /* LCD Return Home Offset */ +#define PA_LCD_ENTMODE 0x00 /* LCD Entry Mode Offset */ +#define PA_LCD_DSPCTL 0x00 /* LCD Display ON/OFF Control Offset */ +#define PA_LCD_FUNC 0x00 /* LCD Function Set Offset */ +#define PA_LCD_CGRAM 0x00 /* LCD Set CGRAM Address Offset */ +#define PA_LCD_DDRAM 0x00 /* LCD Set DDRAM Address Offset */ +#define PA_LCD_RDFLAG 0x01 /* LCD Read Busy Flag Offset */ +#define PA_LCD_WTDATA 0x02 /* LCD Write Datat to RAM Offset */ +#define PA_LCD_RDDATA 0x03 /* LCD Read Data from RAM Offset */ +#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ +#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ + +#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ +#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ +#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ +#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ +#define IRQ_ATA 9 /* ATA IRQ */ +#define IRQ_FATA 10 /* FATA IRQ */ +#define IRQ_POWER 11 /* Power Switch IRQ */ +#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ +#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ + +#define SHUTDOWN_BTN_MAJOR 99 /* Shutdown button device major no. */ + +#define SHUTDOWN_LOOP_CNT 5 /* Shutdown button Detection loop */ +#define SHUTDOWN_DELAY 200 /* Shutdown button delay value(ms) */ + + +/* added by kogiidena */ +/* + * landisk_ledparam + * + * led ------10 -6543210 -6543210 -6543210 + * |000000..|0.......|0.......|U.......| + * | HARD |fastblik| blink | on | + * + * led0: power U:update flag + * led1: error + * led2: usb1 + * led3: usb2 + * led4: usb3 + * led5: usb4 + * led6: usb5 + * + */ +extern int landisk_ledparam; /* from setup.c */ +extern int landisk_buzzerparam; /* from setup.c */ +extern int landisk_arch; /* from setup.c */ + +#define __IO_PREFIX landisk +#include <asm/io_generic.h> + +#endif /* __ASM_SH_IODATA_LANDISK_H */ + diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h index 550501fa4fed..70389b72ffef 100644 --- a/include/asm-sh/machvec.h +++ b/include/asm-sh/machvec.h @@ -8,17 +8,18 @@ */ #ifndef _ASM_SH_MACHVEC_H -#define _ASM_SH_MACHVEC_H 1 +#define _ASM_SH_MACHVEC_H #include <linux/types.h> #include <linux/time.h> - #include <asm/machtypes.h> #include <asm/machvec_init.h> struct device; struct sh_machine_vector { + void (*mv_setup)(char **cmdline_p); + const char *mv_name; int mv_nr_irqs; u8 (*mv_inb)(unsigned long); @@ -65,4 +66,6 @@ struct sh_machine_vector { extern struct sh_machine_vector sh_mv; +#define get_system_type() sh_mv.mv_name + #endif /* _ASM_SH_MACHVEC_H */ diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h index 1707cfb2915d..0aee96a97330 100644 --- a/include/asm-sh/mc146818rtc.h +++ b/include/asm-sh/mc146818rtc.h @@ -4,173 +4,4 @@ #ifndef _ASM_MC146818RTC_H #define _ASM_MC146818RTC_H -#ifdef CONFIG_SH_MPC1211 -#undef _ASM_MC146818RTC_H -#undef RTC_IRQ -#include <asm/mpc1211/mc146818rtc.h> -#else - -#include <asm/rtc.h> - -#define RTC_ALWAYS_BCD 1 - -/* FIXME:RTC Interrupt feature is not implemented yet. */ -#undef RTC_IRQ -#define RTC_IRQ 0 - -#if defined(CONFIG_CPU_SH3) -#define RTC_PORT(n) (R64CNT+(n)*2) -#define CMOS_READ(addr) __CMOS_READ(addr,b) -#define CMOS_WRITE(val,addr) __CMOS_WRITE(val,addr,b) - -#elif defined(CONFIG_SH_SECUREEDGE5410) -#include <asm/snapgear/io.h> - -#define RTC_PORT(n) SECUREEDGE_IOPORT_ADDR -#define CMOS_READ(addr) secureedge5410_cmos_read(addr) -#define CMOS_WRITE(val,addr) secureedge5410_cmos_write(val,addr) -extern unsigned char secureedge5410_cmos_read(int addr); -extern void secureedge5410_cmos_write(unsigned char val, int addr); - -#elif defined(CONFIG_CPU_SH4) -#define RTC_PORT(n) (R64CNT+(n)*4) -#define CMOS_READ(addr) __CMOS_READ(addr,w) -#define CMOS_WRITE(val,addr) __CMOS_WRITE(val,addr,w) -#endif - -#define __CMOS_READ(addr, s) ({ \ - unsigned char val=0, rcr1, rcr2, r64cnt, retry; \ - switch(addr) { \ - case RTC_SECONDS: \ - val = ctrl_inb(RSECCNT); \ - break; \ - case RTC_SECONDS_ALARM: \ - val = ctrl_inb(RSECAR); \ - break; \ - case RTC_MINUTES: \ - val = ctrl_inb(RMINCNT); \ - break; \ - case RTC_MINUTES_ALARM: \ - val = ctrl_inb(RMINAR); \ - break; \ - case RTC_HOURS: \ - val = ctrl_inb(RHRCNT); \ - break; \ - case RTC_HOURS_ALARM: \ - val = ctrl_inb(RHRAR); \ - break; \ - case RTC_DAY_OF_WEEK: \ - val = ctrl_inb(RWKCNT); \ - break; \ - case RTC_DAY_OF_MONTH: \ - val = ctrl_inb(RDAYCNT); \ - break; \ - case RTC_MONTH: \ - val = ctrl_inb(RMONCNT); \ - break; \ - case RTC_YEAR: \ - val = ctrl_in##s(RYRCNT); \ - break; \ - case RTC_REG_A: /* RTC_FREQ_SELECT */ \ - rcr2 = ctrl_inb(RCR2); \ - val = (rcr2 & RCR2_PESMASK) >> 4; \ - rcr1 = ctrl_inb(RCR1); \ - rcr1 = (rcr1 & (RCR1_CIE | RCR1_AIE)) | RCR1_AF;\ - retry = 0; \ - do { \ - ctrl_outb(rcr1, RCR1); /* clear CF */ \ - r64cnt = ctrl_inb(R64CNT); \ - } while((ctrl_inb(RCR1) & RCR1_CF) && retry++ < 1000);\ - r64cnt ^= RTC_BIT_INVERTED; \ - if(r64cnt == 0x7f || r64cnt == 0) \ - val |= RTC_UIP; \ - break; \ - case RTC_REG_B: /* RTC_CONTROL */ \ - rcr1 = ctrl_inb(RCR1); \ - rcr2 = ctrl_inb(RCR2); \ - if(rcr1 & RCR1_CIE) val |= RTC_UIE; \ - if(rcr1 & RCR1_AIE) val |= RTC_AIE; \ - if(rcr2 & RCR2_PESMASK) val |= RTC_PIE; \ - if(!(rcr2 & RCR2_START))val |= RTC_SET; \ - val |= RTC_24H; \ - break; \ - case RTC_REG_C: /* RTC_INTR_FLAGS */ \ - rcr1 = ctrl_inb(RCR1); \ - rcr1 &= ~(RCR1_CF | RCR1_AF); \ - ctrl_outb(rcr1, RCR1); \ - rcr2 = ctrl_inb(RCR2); \ - rcr2 &= ~RCR2_PEF; \ - ctrl_outb(rcr2, RCR2); \ - break; \ - case RTC_REG_D: /* RTC_VALID */ \ - /* Always valid ... */ \ - val = RTC_VRT; \ - break; \ - default: \ - break; \ - } \ - val; \ -}) - -#define __CMOS_WRITE(val, addr, s) ({ \ - unsigned char rcr1,rcr2; \ - switch(addr) { \ - case RTC_SECONDS: \ - ctrl_outb(val, RSECCNT); \ - break; \ - case RTC_SECONDS_ALARM: \ - ctrl_outb(val, RSECAR); \ - break; \ - case RTC_MINUTES: \ - ctrl_outb(val, RMINCNT); \ - break; \ - case RTC_MINUTES_ALARM: \ - ctrl_outb(val, RMINAR); \ - break; \ - case RTC_HOURS: \ - ctrl_outb(val, RHRCNT); \ - break; \ - case RTC_HOURS_ALARM: \ - ctrl_outb(val, RHRAR); \ - break; \ - case RTC_DAY_OF_WEEK: \ - ctrl_outb(val, RWKCNT); \ - break; \ - case RTC_DAY_OF_MONTH: \ - ctrl_outb(val, RDAYCNT); \ - break; \ - case RTC_MONTH: \ - ctrl_outb(val, RMONCNT); \ - break; \ - case RTC_YEAR: \ - ctrl_out##s((ctrl_in##s(RYRCNT) & 0xff00) | (val & 0xff), RYRCNT);\ - break; \ - case RTC_REG_A: /* RTC_FREQ_SELECT */ \ - rcr2 = ctrl_inb(RCR2); \ - if((val & RTC_DIV_CTL) == RTC_DIV_RESET2) \ - rcr2 |= RCR2_RESET; \ - ctrl_outb(rcr2, RCR2); \ - break; \ - case RTC_REG_B: /* RTC_CONTROL */ \ - rcr1 = (ctrl_inb(RCR1) & 0x99) | RCR1_AF; \ - if(val & RTC_AIE) rcr1 |= RCR1_AIE; \ - else rcr1 &= ~RCR1_AIE; \ - if(val & RTC_UIE) rcr1 |= RCR1_CIE; \ - else rcr1 &= ~RCR1_CIE; \ - ctrl_outb(rcr1, RCR1); \ - rcr2 = ctrl_inb(RCR2); \ - if(val & RTC_SET) rcr2 &= ~RCR2_START; \ - else rcr2 |= RCR2_START; \ - ctrl_outb(rcr2, RCR2); \ - break; \ - case RTC_REG_C: /* RTC_INTR_FLAGS */ \ - break; \ - case RTC_REG_D: /* RTC_VALID */ \ - break; \ - default: \ - break; \ - } \ -}) - -#endif /* CONFIG_SH_MPC1211 */ #endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h index 72f07be6117f..cf47df79bb94 100644 --- a/include/asm-sh/mmu.h +++ b/include/asm-sh/mmu.h @@ -3,27 +3,76 @@ #if !defined(CONFIG_MMU) -struct mm_rblock_struct { - int size; - int refcount; - void *kblock; -}; - -struct mm_tblock_struct { - struct mm_rblock_struct *rblock; - struct mm_tblock_struct *next; -}; - typedef struct { - struct mm_tblock_struct tblock; + struct vm_list_struct *vmlist; unsigned long end_brk; } mm_context_t; #else /* Default "unsigned long" context */ -typedef unsigned long mm_context_t; +typedef unsigned long mm_context_id_t; + +typedef struct { + mm_context_id_t id; + void *vdso; +} mm_context_t; #endif /* CONFIG_MMU */ -#endif /* __MMH_H */ + +/* + * Privileged Space Mapping Buffer (PMB) definitions + */ +#define PMB_PASCR 0xff000070 +#define PMB_IRMCR 0xff000078 + +#define PMB_ADDR 0xf6100000 +#define PMB_DATA 0xf7100000 +#define PMB_ENTRY_MAX 16 +#define PMB_E_MASK 0x0000000f +#define PMB_E_SHIFT 8 + +#define PMB_SZ_16M 0x00000000 +#define PMB_SZ_64M 0x00000010 +#define PMB_SZ_128M 0x00000080 +#define PMB_SZ_512M 0x00000090 +#define PMB_SZ_MASK PMB_SZ_512M +#define PMB_C 0x00000008 +#define PMB_WT 0x00000001 +#define PMB_UB 0x00000200 +#define PMB_V 0x00000100 + +#define PMB_NO_ENTRY (-1) + +struct pmb_entry; + +struct pmb_entry { + unsigned long vpn; + unsigned long ppn; + unsigned long flags; + + /* + * 0 .. NR_PMB_ENTRIES for specific entry selection, or + * PMB_NO_ENTRY to search for a free one + */ + int entry; + + struct pmb_entry *next; + /* Adjacent entry link for contiguous multi-entry mappings */ + struct pmb_entry *link; +}; + +/* arch/sh/mm/pmb.c */ +int __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int *entry); +int set_pmb_entry(struct pmb_entry *pmbe); +void clear_pmb_entry(struct pmb_entry *pmbe); +struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags); +void pmb_free(struct pmb_entry *pmbe); +long pmb_remap(unsigned long virt, unsigned long phys, + unsigned long size, unsigned long flags); +void pmb_unmap(unsigned long addr); + +#endif /* __MMU_H */ diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 6760d064bd02..c7088efe579a 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -49,7 +49,7 @@ get_mmu_context(struct mm_struct *mm) unsigned long mc = mmu_context_cache; /* Check if we have old version of context. */ - if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0) + if (((mm->context.id ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0) /* It's up to date, do nothing */ return; @@ -68,7 +68,7 @@ get_mmu_context(struct mm_struct *mm) if (!mc) mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; } - mm->context = mc; + mm->context.id = mc; } /* @@ -78,7 +78,7 @@ get_mmu_context(struct mm_struct *mm) static __inline__ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { - mm->context = NO_CONTEXT; + mm->context.id = NO_CONTEXT; return 0; } @@ -123,7 +123,7 @@ static __inline__ unsigned long get_asid(void) static __inline__ void activate_context(struct mm_struct *mm) { get_mmu_context(mm); - set_asid(mm->context & MMU_CONTEXT_ASID_MASK); + set_asid(mm->context.id & MMU_CONTEXT_ASID_MASK); } /* MMU_TTB can be used for optimizing the fault handling. @@ -174,9 +174,7 @@ static inline void enable_mmu(void) { /* Enable MMU */ ctrl_outl(MMU_CONTROL_INIT, MMUCR); - - /* The manual suggests doing some nops after turning on the MMU */ - __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t"); + ctrl_barrier(); if (mmu_context_cache == NO_CONTEXT) mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; @@ -191,7 +189,8 @@ static inline void disable_mmu(void) cr = ctrl_inl(MMUCR); cr &= ~MMU_CONTROL_INIT; ctrl_outl(cr, MMUCR); - __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t"); + + ctrl_barrier(); } #else /* diff --git a/include/asm-sh/overdrive/fpga.h b/include/asm-sh/overdrive/fpga.h deleted file mode 100644 index 1cd87992c124..000000000000 --- a/include/asm-sh/overdrive/fpga.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ - -#ifndef __FPGA_OD_H__ -#define __FPGA_OD_H__ - -/* This routine will program up the fpga which interfaces to the galileo */ -int init_overdrive_fpga(void); - -#endif diff --git a/include/asm-sh/overdrive/gt64111.h b/include/asm-sh/overdrive/gt64111.h deleted file mode 100644 index 01d58bc13a44..000000000000 --- a/include/asm-sh/overdrive/gt64111.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef _GT64111_H_ -#define _GT64111_H_ - -#define MASTER_INTERFACE 0x0 -#define RAS10_LO_DEC_ADR 0x8 -#define RAS10_HI_DEC_ADR 0x10 -#define RAS32_LO_DEC_ADR 0x18 -#define RAS32_HI_DEC_ADR 0x20 -#define CS20_LO_DEC_ADR 0x28 -#define CS20_HI_DEC_ADR 0x30 -#define CS3_LO_DEC_ADR 0x38 -#define CS3_HI_DEC_ADR 0x40 -#define PCI_IO_LO_DEC_ADR 0x48 -#define PCI_IO_HI_DEC_ADR 0x50 -#define PCI_MEM0_LO_DEC_ADR 0x58 -#define PCI_MEM0_HI_DEC_ADR 0x60 -#define INTERNAL_SPACE_DEC 0x68 -#define BUS_ERR_ADR_LO_CPU 0x70 -#define READONLY0 0x78 -#define PCI_MEM1_LO_DEC_ADR 0x80 -#define PCI_MEM1_HI_DEC_ADR 0x88 -#define RAS0_LO_DEC_ADR 0x400 -#define RAS0_HI_DEC_ADR 0x404 -#define RAS1_LO_DEC_ADR 0x408 -#define RAS1_HI_DEC_ADR 0x40c -#define RAS2_LO_DEC_ADR 0x410 -#define RAS2_HI_DEC_ADR 0x414 -#define RAS3_LO_DEC_ADR 0x418 -#define RAS3_HI_DEC_ADR 0x41c -#define DEV_CS0_LO_DEC_ADR 0x420 -#define DEV_CS0_HI_DEC_ADR 0x424 -#define DEV_CS1_LO_DEC_ADR 0x428 -#define DEV_CS1_HI_DEC_ADR 0x42c -#define DEV_CS2_LO_DEC_ADR 0x430 -#define DEV_CS2_HI_DEC_ADR 0x434 -#define DEV_CS3_LO_DEC_ADR 0x438 -#define DEV_CS3_HI_DEC_ADR 0x43c -#define DEV_BOOTCS_LO_DEC_ADR 0x440 -#define DEV_BOOTCS_HI_DEC_ADR 0x444 -#define DEV_ADR_DEC_ERR 0x470 -#define DRAM_CFG 0x448 -#define DRAM_BANK0_PARMS 0x44c -#define DRAM_BANK1_PARMS 0x450 -#define DRAM_BANK2_PARMS 0x454 -#define DRAM_BANK3_PARMS 0x458 -#define DEV_BANK0_PARMS 0x45c -#define DEV_BANK1_PARMS 0x460 -#define DEV_BANK2_PARMS 0x464 -#define DEV_BANK3_PARMS 0x468 -#define DEV_BOOT_BANK_PARMS 0x46c -#define CH0_DMA_BYTECOUNT 0x800 -#define CH1_DMA_BYTECOUNT 0x804 -#define CH2_DMA_BYTECOUNT 0x808 -#define CH3_DMA_BYTECOUNT 0x80c -#define CH0_DMA_SRC_ADR 0x810 -#define CH1_DMA_SRC_ADR 0x814 -#define CH2_DMA_SRC_ADR 0x818 -#define CH3_DMA_SRC_ADR 0x81c -#define CH0_DMA_DST_ADR 0x820 -#define CH1_DMA_DST_ADR 0x824 -#define CH2_DMA_DST_ADR 0x828 -#define CH3_DMA_DST_ADR 0x82c -#define CH0_NEXT_REC_PTR 0x830 -#define CH1_NEXT_REC_PTR 0x834 -#define CH2_NEXT_REC_PTR 0x838 -#define CH3_NEXT_REC_PTR 0x83c -#define CH0_CTRL 0x840 -#define CH1_CTRL 0x844 -#define CH2_CTRL 0x848 -#define CH3_CTRL 0x84c -#define DMA_ARBITER 0x860 -#define TIMER0 0x850 -#define TIMER1 0x854 -#define TIMER2 0x858 -#define TIMER3 0x85c -#define TIMER_CTRL 0x864 -#define PCI_CMD 0xc00 -#define PCI_TIMEOUT 0xc04 -#define PCI_RAS10_BANK_SIZE 0xc08 -#define PCI_RAS32_BANK_SIZE 0xc0c -#define PCI_CS20_BANK_SIZE 0xc10 -#define PCI_CS3_BANK_SIZE 0xc14 -#define PCI_SERRMASK 0xc28 -#define PCI_INTACK 0xc34 -#define PCI_BAR_EN 0xc3c -#define PCI_CFG_ADR 0xcf8 -#define PCI_CFG_DATA 0xcfc -#define PCI_INTCAUSE 0xc18 -#define PCI_MAST_MASK 0xc1c -#define PCI_PCIMASK 0xc24 -#define BAR_ENABLE_ADR 0xc3c - -/* These are config registers, accessible via PCI space */ -#define PCI_CONFIG_RAS10_BASE_ADR 0x010 -#define PCI_CONFIG_RAS32_BASE_ADR 0x014 -#define PCI_CONFIG_CS20_BASE_ADR 0x018 -#define PCI_CONFIG_CS3_BASE_ADR 0x01c -#define PCI_CONFIG_INT_REG_MM_ADR 0x020 -#define PCI_CONFIG_INT_REG_IO_ADR 0x024 -#define PCI_CONFIG_BOARD_VENDOR 0x02c -#define PCI_CONFIG_ROM_ADR 0x030 -#define PCI_CONFIG_INT_PIN_LINE 0x03c - - - - - -#endif - diff --git a/include/asm-sh/overdrive/io.h b/include/asm-sh/overdrive/io.h deleted file mode 100644 index 0dba700e9643..000000000000 --- a/include/asm-sh/overdrive/io.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-sh/io_od.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an STMicroelectronics Overdrive - */ - -#ifndef _ASM_SH_IO_OD_H -#define _ASM_SH_IO_OD_H - -extern unsigned char od_inb(unsigned long port); -extern unsigned short od_inw(unsigned long port); -extern unsigned int od_inl(unsigned long port); - -extern void od_outb(unsigned char value, unsigned long port); -extern void od_outw(unsigned short value, unsigned long port); -extern void od_outl(unsigned int value, unsigned long port); - -extern unsigned char od_inb_p(unsigned long port); -extern unsigned short od_inw_p(unsigned long port); -extern unsigned int od_inl_p(unsigned long port); -extern void od_outb_p(unsigned char value, unsigned long port); -extern void od_outw_p(unsigned short value, unsigned long port); -extern void od_outl_p(unsigned int value, unsigned long port); - -extern void od_insb(unsigned long port, void *addr, unsigned long count); -extern void od_insw(unsigned long port, void *addr, unsigned long count); -extern void od_insl(unsigned long port, void *addr, unsigned long count); -extern void od_outsb(unsigned long port, const void *addr, unsigned long count); -extern void od_outsw(unsigned long port, const void *addr, unsigned long count); -extern void od_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned long od_isa_port2addr(unsigned long offset); - -#endif /* _ASM_SH_IO_OD_H */ diff --git a/include/asm-sh/overdrive/overdrive.h b/include/asm-sh/overdrive/overdrive.h deleted file mode 100644 index fc746c244f83..000000000000 --- a/include/asm-sh/overdrive/overdrive.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ - - -#ifndef __OVERDRIVE_H__ -#define __OVERDRIVE_H__ - -#define OVERDRIVE_INT_CT 0xa3a00000 -#define OVERDRIVE_INT_DT 0xa3b00000 - -#define OVERDRIVE_CTRL 0xa3000000 - -/* Shoving all these bits into the same register is not a good idea. - * As soon as I get a spare moment, I'll change the FPGA and put each - * bit in a separate register - */ - -#define VALID_CTRL_BITS 0x1f - -#define ENABLE_RS232_MASK 0x1e -#define DISABLE_RS232_BIT 0x01 - -#define ENABLE_NMI_MASK 0x1d -#define DISABLE_NMI_BIT 0x02 - -#define RESET_PCI_MASK 0x1b -#define ENABLE_PCI_BIT 0x04 - -#define ENABLE_LED_MASK 0x17 -#define DISABLE_LED_BIT 0x08 - -#define RESET_FPGA_MASK 0x0f -#define ENABLE_FPGA_BIT 0x10 - - -#define FPGA_DCLK_ADDRESS 0xA3C00000 - -#define FPGA_DATA 0x01 /* W */ -#define FPGA_CONFDONE 0x02 /* R */ -#define FPGA_NOT_STATUS 0x04 /* R */ -#define FPGA_INITDONE 0x08 /* R */ - -#define FPGA_TIMEOUT 100000 - - -/* Interrupts for the overdrive. Note that these numbers have - * nothing to do with the actual IRQ numbers they appear on, - * this is all programmable. This is simply the position in the - * INT_CT register. - */ - -#define OVERDRIVE_PCI_INTA 0 -#define OVERDRIVE_PCI_INTB 1 -#define OVERDRIVE_PCI_INTC 2 -#define OVERDRIVE_PCI_INTD 3 -#define OVERDRIVE_GALILEO_INT 4 -#define OVERDRIVE_GALILEO_LOCAL_INT 5 -#define OVERDRIVE_AUDIO_INT 6 -#define OVERDRIVE_KEYBOARD_INT 7 - -/* Which Linux IRQ should we assign to each interrupt source? */ -#define OVERDRIVE_PCI_IRQ1 2 -#ifdef CONFIG_HACKED_NE2K -#define OVERDRIVE_PCI_IRQ2 7 -#else -#define OVERDRIVE_PCI_IRQ2 2 -#undef OVERDRIVE_PCI_INTB -#define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA - -#endif - -/* Put the ESS solo audio chip on IRQ 4 */ -#define OVERDRIVE_ESS_IRQ 4 - -/* Where the memory behind the PCI bus appears */ -#define PCI_DRAM_BASE 0xb7000000 -#define PCI_DRAM_SIZE (16*1024*1024) -#define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1) - -/* Where the IO region appears in the memory */ -#define PCI_GTIO_BASE 0xb8000000 - -#endif diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 6f7eb8a3aba5..ca8b26d90475 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -16,7 +16,13 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 + +#ifdef __ASSEMBLY__ +#define PAGE_SIZE (1 << PAGE_SHIFT) +#else #define PAGE_SIZE (1UL << PAGE_SHIFT) +#endif + #define PAGE_MASK (~(PAGE_SIZE-1)) #define PTE_MASK PAGE_MASK @@ -30,7 +36,6 @@ #define HPAGE_SIZE (1UL << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE-1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) -#define ARCH_HAS_SETCLEAR_HUGE_PTE #endif #ifdef __KERNEL__ @@ -39,10 +44,18 @@ extern void (*clear_page)(void *to); extern void (*copy_page)(void *to, void *from); +extern unsigned long shm_align_mask; + +#ifdef CONFIG_MMU extern void clear_page_slow(void *to); extern void copy_page_slow(void *to, void *from); +#else +extern void clear_page_nommu(void *to); +extern void copy_page_nommu(void *to, void *from); +#endif -#if defined(CONFIG_SH7705_CACHE_32KB) && defined(CONFIG_MMU) +#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) struct page; extern void clear_user_page(void *to, unsigned long address, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg); @@ -51,29 +64,20 @@ extern void __copy_user_page(void *to, void *from, void *orig_to); #elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU) #define clear_user_page(page, vaddr, pg) clear_page(page) #define copy_user_page(to, from, vaddr, pg) copy_page(to, from) -#elif defined(CONFIG_CPU_SH4) -struct page; -extern void clear_user_page(void *to, unsigned long address, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg); -extern void __clear_user_page(void *to, void *orig_to); -extern void __copy_user_page(void *to, void *from, void *orig_to); #endif /* * These are used to make use of C type-checking.. */ typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pgd; } pgd_t; typedef struct { unsigned long pgprot; } pgprot_t; #define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) #define pgd_val(x) ((x).pgd) #define pgprot_val(x) ((x).pgprot) #define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) @@ -93,7 +97,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; #define __MEMORY_START CONFIG_MEMORY_START #define __MEMORY_SIZE CONFIG_MEMORY_SIZE -#define PAGE_OFFSET (0x80000000UL) +#define PAGE_OFFSET CONFIG_PAGE_OFFSET #define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) #define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) @@ -115,5 +119,10 @@ typedef struct { unsigned long pgprot; } pgprot_t; #include <asm-generic/memory_model.h> #include <asm-generic/page.h> +/* vDSO support */ +#ifdef CONFIG_VSYSCALL +#define __HAVE_ARCH_GATE_AREA +#endif + #endif /* __KERNEL__ */ #endif /* __ASM_SH_PAGE_H */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h index 0a523c85b11c..6ccc948fe216 100644 --- a/include/asm-sh/pci.h +++ b/include/asm-sh/pci.h @@ -32,6 +32,34 @@ extern struct pci_channel board_pci_channels[]; #define PCIBIOS_MIN_IO board_pci_channels->io_resource->start #define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start +/* + * I/O routine helpers + */ +#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#define PCI_IO_AREA 0xFE400000 +#define PCI_IO_SIZE 0x00400000 +#else +#define PCI_IO_AREA 0xFE240000 +#define PCI_IO_SIZE 0X00040000 +#endif + +#define PCI_MEM_SIZE 0x01000000 + +#define SH4_PCIIOBR_MASK 0xFFFC0000 +#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) + +#if defined(CONFIG_PCI) +#define is_pci_ioaddr(port) \ + (((port) >= PCIBIOS_MIN_IO) && \ + ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) +#define is_pci_memaddr(port) \ + (((port) >= PCIBIOS_MIN_MEM) && \ + ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) +#else +#define is_pci_ioaddr(port) (0) +#define is_pci_memaddr(port) (0) +#endif + struct pci_dev; extern void pcibios_set_master(struct pci_dev *dev); @@ -87,15 +115,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) */ #define pci_dac_dma_supported(pci_dev, mask) (0) -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) (virt_to_bus((sg)->dma_address)) -#define sg_dma_len(sg) ((sg)->length) - #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, @@ -107,11 +126,12 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, #endif /* Board-specific fixup routines. */ -extern void pcibios_fixup(void); -extern void pcibios_fixup_irqs(void); +void pcibios_fixup(void); +int pcibios_init_platform(void); +int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); #ifdef CONFIG_PCI_AUTO -extern int pciauto_assign_resources(int busno, struct pci_channel *hose); +int pciauto_assign_resources(int busno, struct pci_channel *hose); #endif static inline void pcibios_add_platform_entries(struct pci_dev *dev) diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h index f4f233f7a4f5..e841465ab4d2 100644 --- a/include/asm-sh/pgalloc.h +++ b/include/asm-sh/pgalloc.h @@ -1,15 +1,6 @@ #ifndef __ASM_SH_PGALLOC_H #define __ASM_SH_PGALLOC_H -#include <linux/threads.h> -#include <linux/slab.h> -#include <linux/mm.h> - -#define pgd_quicklist ((unsigned long *)0) -#define pmd_quicklist ((unsigned long *)0) -#define pte_quicklist ((unsigned long *)0) -#define pgtable_cache_size 0L - #define pmd_populate_kernel(mm, pmd, pte) \ set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) @@ -24,38 +15,24 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL); - - if (pgd) - memset(pgd, 0, pgd_size); - - return pgd; + return (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); } static inline void pgd_free(pgd_t *pgd) { - kfree(pgd); + free_page((unsigned long)pgd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte; - - pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); - - return pte; + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); } static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *pte; - - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - - return pte; + return alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); } static inline void pte_free_kernel(pte_t *pte) @@ -75,14 +52,8 @@ static inline void pte_free(struct page *pte) * inside the pgd, so has no extra memory associated with it. */ -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(x) do { } while (0) #define __pmd_free_tlb(tlb,x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() #define check_pgt_cache() do { } while (0) -#ifdef CONFIG_CPU_SH4 -#define PG_mapped PG_arch_1 -#endif - #endif /* __ASM_SH_PGALLOC_H */ diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 40d41a78041e..2c8682ad1012 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -1,42 +1,42 @@ -#ifndef __ASM_SH_PGTABLE_H -#define __ASM_SH_PGTABLE_H - -#include <asm-generic/4level-fixup.h> - /* + * This file contains the functions and defines necessary to modify and + * use the SuperH page table tree. + * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 - 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. */ +#ifndef __ASM_SH_PGTABLE_H +#define __ASM_SH_PGTABLE_H -#include <asm/pgtable-2level.h> +#include <asm-generic/pgtable-nopmd.h> +#include <asm/page.h> + +#define PTRS_PER_PGD 1024 -/* - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. - */ #ifndef __ASSEMBLY__ -#include <asm/processor.h> #include <asm/addrspace.h> #include <asm/fixmap.h> -#include <linux/threads.h> extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; extern void paging_init(void); /* - * Basically we have the same two-level (which is the logical three level - * Linux page table layout folded) page tables as the i386. - */ - -/* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */ -extern unsigned long empty_zero_page[1024]; +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) #endif /* !__ASSEMBLY__ */ +/* traditional two-level paging structure */ +#define PGDIR_SHIFT 22 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PTE 1024 #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) @@ -47,7 +47,6 @@ extern unsigned long empty_zero_page[1024]; #define PTE_PHYS_MASK 0x1ffff000 -#ifndef __ASSEMBLY__ /* * First 1MB map is used by fixed purpose. * Currently only 4-enty (16kB) is used (see arch/sh/mm/cache.c) @@ -55,20 +54,41 @@ extern unsigned long empty_zero_page[1024]; #define VMALLOC_START (P3SEG+0x00100000) #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) -#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ -#define _PAGE_HW_SHARED 0x002 /* SH-bit : page is shared among processes */ -#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ -#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed */ -#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ -#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ -#define _PAGE_PROTNONE 0x200 /* software: if not present */ -#define _PAGE_ACCESSED 0x400 /* software: page referenced */ -#define _PAGE_U0_SHARED 0x800 /* software: page is shared in user space */ - -#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ +/* + * Linux PTEL encoding. + * + * Hardware and software bit definitions for the PTEL value: + * + * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). + * + * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the + * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, + * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). + * + * In order to keep this relatively clean, do not use these for defining + * SH-3 specific flags until all of the other unused bits have been + * exhausted. + * + * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. + * + * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. + * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * + * - Bits 31, 30, and 29 remain unused by everyone and can be used for future + * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS. + */ +#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ +#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ +#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ +#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed */ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ +#define _PAGE_PROTNONE 0x200 /* software: if not present */ +#define _PAGE_ACCESSED 0x400 /* software: page referenced */ +#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ /* software: moves to PTEA.TC (Timing Control) */ #define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ @@ -83,23 +103,17 @@ extern unsigned long empty_zero_page[1024]; #define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ #define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ - -/* Mask which drop software flags - * We also drop WT bit since it is used for _PAGE_FILE - * bit in this implementation. - */ -#define _PAGE_CLEAR_FLAGS (_PAGE_WT | _PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_U0_SHARED) - -#if defined(CONFIG_CPU_SH3) -/* - * MMU on SH-3 has bug on SH-bit: We can't use it if MMUCR.IX=1. - * Work around: Just drop SH-bit. - */ -#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS | _PAGE_HW_SHARED)) +/* Mask which drops unused bits from the PTEL value */ +#ifdef CONFIG_CPU_SH3 +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ + _PAGE_FILE | _PAGE_SZ1 | \ + _PAGE_HW_SHARED) #else -#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) #endif +#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) + /* Hardware flags: SZ0=1 (4k-byte) */ #define _PAGE_FLAGS_HARD _PAGE_SZ0 @@ -109,15 +123,15 @@ extern unsigned long empty_zero_page[1024]; #define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) #endif -#define _PAGE_SHARED _PAGE_U0_SHARED - #define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) #define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_SHARED) +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + +#ifndef __ASSEMBLY__ #ifdef CONFIG_MMU #define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_SHARED | _PAGE_FLAGS_HARD) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD) #define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD) #define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD) #define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) @@ -137,12 +151,13 @@ extern unsigned long empty_zero_page[1024]; #define PAGE_KERNEL_PCC __pgprot(0) #endif +#endif /* __ASSEMBLY__ */ + /* * As i386 and MIPS, SuperH can't do page protection for execute, and * considers that the same as a read. Also, write permissions imply - * read permissions. This is the closest we can get.. + * read permissions. This is the closest we can get.. */ - #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY @@ -161,6 +176,26 @@ extern unsigned long empty_zero_page[1024]; #define __S110 PAGE_SHARED #define __S111 PAGE_SHARED +#ifndef __ASSEMBLY__ + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + #define pte_none(x) (!pte_val(x)) #define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) #define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) @@ -171,7 +206,7 @@ extern unsigned long empty_zero_page[1024]; #define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) -#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK) +#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK) /* * The following only work if pte_present() is true. @@ -248,6 +283,11 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + struct vm_area_struct; extern void update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte); @@ -272,8 +312,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma, typedef pte_t *pte_addr_t; -#endif /* !__ASSEMBLY__ */ - #define kern_addr_valid(addr) (1) #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ @@ -301,5 +339,5 @@ extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t #include <asm-generic/pgtable.h> +#endif /* !__ASSEMBLY__ */ #endif /* __ASM_SH_PAGE_H */ - diff --git a/include/asm-sh/pm.h b/include/asm-sh/pm.h new file mode 100644 index 000000000000..56fdbd6b1c94 --- /dev/null +++ b/include/asm-sh/pm.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com> + * + */ +#ifndef __ASM_SH_PM_H +#define __ASM_SH_PM_H + +extern u8 wakeup_start; +extern u8 wakeup_end; + +void pm_enter(void); + +#endif diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index eeb0f48bb99e..474773853cd1 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -14,6 +14,7 @@ #include <asm/types.h> #include <asm/cache.h> #include <asm/ptrace.h> +#include <asm/cpu-features.h> /* * Default implementation of macro that returns current @@ -38,27 +39,30 @@ enum cpu_type { CPU_SH7604, /* SH-3 types */ - CPU_SH7705, CPU_SH7707, CPU_SH7708, CPU_SH7708S, CPU_SH7708R, - CPU_SH7709, CPU_SH7709A, CPU_SH7729, CPU_SH7300, + CPU_SH7705, CPU_SH7706, CPU_SH7707, + CPU_SH7708, CPU_SH7708S, CPU_SH7708R, + CPU_SH7709, CPU_SH7709A, CPU_SH7710, + CPU_SH7729, CPU_SH7300, /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, - CPU_SH73180, CPU_SH7770, CPU_SH7780, CPU_SH7781, + CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781, /* Unknown subtype */ CPU_SH_NONE }; struct sh_cpuinfo { - enum cpu_type type; + unsigned int type; unsigned long loops_per_jiffy; - struct cache_info icache; - struct cache_info dcache; + struct cache_info icache; /* Primary I-cache */ + struct cache_info dcache; /* Primary D-cache */ + struct cache_info scache; /* Secondary cache */ unsigned long flags; -}; +} __attribute__ ((aligned(SMP_CACHE_BYTES))); extern struct sh_cpuinfo boot_cpu_data; @@ -125,17 +129,6 @@ union sh_fpu_union { struct sh_fpu_soft_struct soft; }; -/* - * Processor flags - */ - -#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ -#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ -#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ -#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ -#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ -#define CPU_HAS_PTEA 0x0020 /* PTEA register */ - struct thread_struct { unsigned long sp; unsigned long pc; @@ -149,6 +142,10 @@ struct thread_struct { union sh_fpu_union fpu; }; +typedef struct { + unsigned long seg; +} mm_segment_t; + /* Count of active tasks with UBC settings */ extern int ubc_usercnt; @@ -266,5 +263,24 @@ extern unsigned long get_wchan(struct task_struct *p); #define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") #define cpu_relax() barrier() +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_CPU_SH4) +#define PREFETCH_STRIDE L1_CACHE_BYTES +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +static inline void prefetch(void *x) +{ + __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); +} + +#define prefetchw(x) prefetch(x) +#endif + +#ifdef CONFIG_VSYSCALL +extern int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + #endif /* __KERNEL__ */ #endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/r7780rp/ide.h b/include/asm-sh/r7780rp/ide.h new file mode 100644 index 000000000000..a1ed78e0f617 --- /dev/null +++ b/include/asm-sh/r7780rp/ide.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_R7780RP_IDE_H +#define __ASM_SH_R7780RP_IDE_H + +/* Nothing to see here.. */ +#include <asm/mach/r7780rp.h> + +#endif /* __ASM_SH_R7780RP_IDE_H */ + diff --git a/include/asm-sh/r7780rp/r7780rp.h b/include/asm-sh/r7780rp/r7780rp.h new file mode 100644 index 000000000000..f95d9dba31a2 --- /dev/null +++ b/include/asm-sh/r7780rp/r7780rp.h @@ -0,0 +1,177 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* + * linux/include/asm-sh/r7780rp.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Solutions Highlander R7780RP support + */ + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_ICCR (PA_BCR+0x0600) /* Serial control */ +#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */ +#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */ +#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */ +#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define PA_AX88796L 0xa4100400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */ +#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */ +#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */ +#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */ +#define IRQ_CFCARD 1 /* CF Card IRQ */ +// #define IRQ_CFINST 0 /* CF Card Insert IRQ */ +#define IRQ_TP 2 /* Touch Panel IRQ */ +#define IRQ_SCI1 3 /* SCI1 IRQ */ +#define IRQ_SCI0 4 /* SCI0 IRQ */ +#define IRQ_2SERIAL 5 /* Serial IRQ */ +#define IRQ_RTC 6 /* RTC A / B IRQ */ +#define IRQ_EXTENTION6 7 /* EXT6n IRQ */ +#define IRQ_EXTENTION5 8 /* EXT5n IRQ */ +#define IRQ_EXTENTION4 9 /* EXT4n IRQ */ +#define IRQ_EXTENTION2 10 /* EXT2n IRQ */ +#define IRQ_EXTENTION1 11 /* EXT1n IRQ */ +#define IRQ_ONETH 13 /* On board Ethernet IRQ */ +#define IRQ_PSW 14 /* Push Switch IRQ */ + +#else /* R7780RP */ + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_ICCR (PA_BCR+0x0500) /* Serial control */ +#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */ +#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */ +#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */ +#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */ +#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */ +#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */ +#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */ +#define IRQ_CFCARD 4 /* CF Card IRQ */ +#define IRQ_CFINST 5 /* CF Card Insert IRQ */ +#define IRQ_M66596 6 /* M66596 IRQ */ +#define IRQ_SDCARD 7 /* SD Card IRQ */ +#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */ +#define IRQ_SCI 9 /* SCI IRQ */ +#define IRQ_2SERIAL 10 /* Serial IRQ */ +#define IRQ_EXTENTION 11 /* EXTn IRQ */ +#define IRQ_ONETH 12 /* On board Ethernet IRQ */ +#define IRQ_PSW 13 /* Push Switch IRQ */ +#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */ + +#endif /* CONFIG_SH_R7780MP */ + +#define __IO_PREFIX r7780rp +#include <asm/io_generic.h> + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h index cea9cdf9b925..91aacc96151b 100644 --- a/include/asm-sh/rtc.h +++ b/include/asm-sh/rtc.h @@ -1,29 +1,8 @@ #ifndef _ASM_RTC_H #define _ASM_RTC_H -#ifdef __KERNEL__ -#include <asm/machvec.h> -#include <asm/cpu/rtc.h> - -extern void sh_rtc_gettimeofday(struct timespec *ts); -extern int sh_rtc_settimeofday(const time_t secs); extern void (*board_time_init)(void); -extern void (*rtc_get_time)(struct timespec *); -extern int (*rtc_set_time)(const time_t); - -/* RCR1 Bits */ -#define RCR1_CF 0x80 /* Carry Flag */ -#define RCR1_CIE 0x10 /* Carry Interrupt Enable */ -#define RCR1_AIE 0x08 /* Alarm Interrupt Enable */ -#define RCR1_AF 0x01 /* Alarm Flag */ - -/* RCR2 Bits */ -#define RCR2_PEF 0x80 /* PEriodic interrupt Flag */ -#define RCR2_PESMASK 0x70 /* Periodic interrupt Set */ -#define RCR2_RTCEN 0x08 /* ENable RTC */ -#define RCR2_ADJ 0x04 /* ADJustment (30-second) */ -#define RCR2_RESET 0x02 /* Reset bit */ -#define RCR2_START 0x01 /* Start bit */ +extern void (*rtc_sh_get_time)(struct timespec *); +extern int (*rtc_sh_set_time)(const time_t); -#endif /* __KERNEL__ */ #endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d/rts7751r2d.h b/include/asm-sh/rts7751r2d/rts7751r2d.h index 4e09ba597e9a..b112ae221fd1 100644 --- a/include/asm-sh/rts7751r2d/rts7751r2d.h +++ b/include/asm-sh/rts7751r2d/rts7751r2d.h @@ -41,8 +41,6 @@ #define PA_AX88796L 0xaa000400 /* AX88796L Area */ #define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ -#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ -#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ #define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ #define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h index 7b91df140022..d19e7cd3b023 100644 --- a/include/asm-sh/scatterlist.h +++ b/include/asm-sh/scatterlist.h @@ -10,4 +10,13 @@ struct scatterlist { #define ISA_DMA_THRESHOLD (0x1fffffff) +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + #endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/include/asm-sh/sci.h b/include/asm-sh/sci.h new file mode 100644 index 000000000000..52e73660c129 --- /dev/null +++ b/include/asm-sh/sci.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_SCI_H +#define __ASM_SH_SCI_H + +#include <linux/serial_core.h> + +/* + * Generic header for SuperH SCI(F) + * + * Do not place SH-specific parts in here, sh64 and h8300 depend on this too. + */ + +/* Offsets into the sci_port->irqs array */ +enum { + SCIx_ERI_IRQ, + SCIx_RXI_IRQ, + SCIx_TXI_IRQ, + SCIx_BRI_IRQ, + SCIx_NR_IRQS, +}; + +/* + * Platform device specific platform_data struct + */ +struct plat_sci_port { + void __iomem *membase; /* io cookie */ + unsigned long mapbase; /* resource base */ + unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ + unsigned int type; /* SCI / SCIF / IRDA */ + upf_t flags; /* UPF_* flags */ +}; + +int early_sci_setup(struct uart_port *port); + +#endif /* __ASM_SH_SCI_H */ diff --git a/include/asm-sh/se/se.h b/include/asm-sh/se.h index 791c5da0388a..a1832154a3aa 100644 --- a/include/asm-sh/se/se.h +++ b/include/asm-sh/se.h @@ -74,4 +74,7 @@ #define IRQ_STNIC 10 #endif +#define __IO_PREFIX se +#include <asm/io_generic.h> + #endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/include/asm-sh/se/io.h b/include/asm-sh/se/io.h deleted file mode 100644 index 9eeb86cd6cef..000000000000 --- a/include/asm-sh/se/io.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/io_se.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an Hitachi SolutionEngine - */ - -#ifndef _ASM_SH_IO_SE_H -#define _ASM_SH_IO_SE_H - -extern unsigned char se_inb(unsigned long port); -extern unsigned short se_inw(unsigned long port); -extern unsigned int se_inl(unsigned long port); - -extern void se_outb(unsigned char value, unsigned long port); -extern void se_outw(unsigned short value, unsigned long port); -extern void se_outl(unsigned int value, unsigned long port); - -extern unsigned char se_inb_p(unsigned long port); -extern void se_outb_p(unsigned char value, unsigned long port); - -extern void se_insb(unsigned long port, void *addr, unsigned long count); -extern void se_insw(unsigned long port, void *addr, unsigned long count); -extern void se_insl(unsigned long port, void *addr, unsigned long count); -extern void se_outsb(unsigned long port, const void *addr, unsigned long count); -extern void se_outsw(unsigned long port, const void *addr, unsigned long count); -extern void se_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned long se_isa_port2addr(unsigned long offset); - -#endif /* _ASM_SH_IO_SE_H */ diff --git a/include/asm-sh/se7300/se7300.h b/include/asm-sh/se7300.h index 3ec1ded86c97..4e24edccb30d 100644 --- a/include/asm-sh/se7300/se7300.h +++ b/include/asm-sh/se7300.h @@ -58,4 +58,7 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define __IO_PREFIX sh7300se +#include <asm/io_generic.h> + #endif /* __ASM_SH_HITACHI_SE7300_H */ diff --git a/include/asm-sh/se7300/io.h b/include/asm-sh/se7300/io.h deleted file mode 100644 index c6af85529714..000000000000 --- a/include/asm-sh/se7300/io.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * include/asm-sh/se7300/io.h - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * IO functions for SH-Mobile(SH7300) SolutionEngine - */ - -#ifndef _ASM_SH_IO_7300SE_H -#define _ASM_SH_IO_7300SE_H - -extern unsigned char sh7300se_inb(unsigned long port); -extern unsigned short sh7300se_inw(unsigned long port); -extern unsigned int sh7300se_inl(unsigned long port); - -extern void sh7300se_outb(unsigned char value, unsigned long port); -extern void sh7300se_outw(unsigned short value, unsigned long port); -extern void sh7300se_outl(unsigned int value, unsigned long port); - -extern unsigned char sh7300se_inb_p(unsigned long port); -extern void sh7300se_outb_p(unsigned char value, unsigned long port); - -extern void sh7300se_insb(unsigned long port, void *addr, unsigned long count); -extern void sh7300se_insw(unsigned long port, void *addr, unsigned long count); -extern void sh7300se_insl(unsigned long port, void *addr, unsigned long count); -extern void sh7300se_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh7300se_outsw(unsigned long port, const void *addr, unsigned long count); -extern void sh7300se_outsl(unsigned long port, const void *addr, unsigned long count); - -#endif /* _ASM_SH_IO_7300SE_H */ diff --git a/include/asm-sh/se73180/se73180.h b/include/asm-sh/se73180.h index f5b93e39e768..3a4acb3e38a1 100644 --- a/include/asm-sh/se73180/se73180.h +++ b/include/asm-sh/se73180.h @@ -59,4 +59,7 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define __IO_PREFIX sh73180se +#include <asm/io_generic.h> + #endif /* __ASM_SH_HITACHI_SE73180_H */ diff --git a/include/asm-sh/se73180/io.h b/include/asm-sh/se73180/io.h deleted file mode 100644 index c9cb1b9412c6..000000000000 --- a/include/asm-sh/se73180/io.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-sh/se73180/io.h - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * Based on include/asm-sh/se7300/io.h - * - * IO functions for SH-Mobile3(SH73180) SolutionEngine - * - */ - -#ifndef _ASM_SH_IO_73180SE_H -#define _ASM_SH_IO_73180SE_H - -extern unsigned char sh73180se_inb(unsigned long port); -extern unsigned short sh73180se_inw(unsigned long port); -extern unsigned int sh73180se_inl(unsigned long port); - -extern void sh73180se_outb(unsigned char value, unsigned long port); -extern void sh73180se_outw(unsigned short value, unsigned long port); -extern void sh73180se_outl(unsigned int value, unsigned long port); - -extern unsigned char sh73180se_inb_p(unsigned long port); -extern void sh73180se_outb_p(unsigned char value, unsigned long port); - -extern void sh73180se_insb(unsigned long port, void *addr, unsigned long count); -extern void sh73180se_insw(unsigned long port, void *addr, unsigned long count); -extern void sh73180se_insl(unsigned long port, void *addr, unsigned long count); -extern void sh73180se_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh73180se_outsw(unsigned long port, const void *addr, unsigned long count); -extern void sh73180se_outsl(unsigned long port, const void *addr, unsigned long count); - -#endif /* _ASM_SH_IO_73180SE_H */ diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h new file mode 100644 index 000000000000..e7914a54aa96 --- /dev/null +++ b/include/asm-sh/se7343.h @@ -0,0 +1,82 @@ +#ifndef __ASM_SH_HITACHI_SE7343_H +#define __ASM_SH_HITACHI_SE7343_H + +/* + * include/asm-sh/se/se7343.h + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * SH-Mobile SolutionEngine 7343 support + */ + +/* Box specific addresses. */ + +/* Area 0 */ +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ +#define PA_FROM 0x00400000 /* Flash ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ +#define PA_SRAM 0x00800000 /* SRAM */ +#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ +/* Area 1 */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +/* Area 2 */ +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +/* Area 3 */ +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 +/* Area 4 */ +#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) +#define PA_LED 0xb0C00000 /* LED */ +#define LED_SHIFT 0 +#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ +#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ +#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ +/* Area 5 */ +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +/* Area 6 */ +#define PA_LCD1 0xb8000000 +#define PA_LCD2 0xb8800000 + +#define __IO_PREFIX sh7343se +#include <asm/io_generic.h> + +/* External Multiplexed interrupts */ +#define PC_IRQ0 OFFCHIP_IRQ_BASE +#define PC_IRQ1 (PC_IRQ0 + 1) +#define PC_IRQ2 (PC_IRQ1 + 1) +#define PC_IRQ3 (PC_IRQ2 + 1) + +#define EXT_IRQ0 (PC_IRQ3 + 1) +#define EXT_IRQ1 (EXT_IRQ0 + 1) +#define EXT_IRQ2 (EXT_IRQ1 + 1) +#define EXT_IRQ3 (EXT_IRQ2 + 1) + +#define USB_IRQ0 (EXT_IRQ3 + 1) +#define USB_IRQ1 (USB_IRQ0 + 1) + +#define UART_IRQ0 (USB_IRQ1 + 1) +#define UART_IRQ1 (UART_IRQ0 + 1) + +#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/include/asm-sh/se7751/se7751.h b/include/asm-sh/se7751.h index 738e22bebdfb..88cd379d9084 100644 --- a/include/asm-sh/se7751/se7751.h +++ b/include/asm-sh/se7751.h @@ -65,4 +65,7 @@ #define IRQ_79C973 13 +#define __IO_PREFIX sh7751se +#include <asm/io_generic.h> + #endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/include/asm-sh/se7751/io.h b/include/asm-sh/se7751/io.h deleted file mode 100644 index 78d8f5744bc5..000000000000 --- a/include/asm-sh/se7751/io.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-sh/io_7751se.h - * - * Modified version of io_se.h for the 7751se-specific functions. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an Hitachi SolutionEngine - */ - -#ifndef _ASM_SH_IO_7751SE_H -#define _ASM_SH_IO_7751SE_H - -extern unsigned char sh7751se_inb(unsigned long port); -extern unsigned short sh7751se_inw(unsigned long port); -extern unsigned int sh7751se_inl(unsigned long port); - -extern void sh7751se_outb(unsigned char value, unsigned long port); -extern void sh7751se_outw(unsigned short value, unsigned long port); -extern void sh7751se_outl(unsigned int value, unsigned long port); - -extern unsigned char sh7751se_inb_p(unsigned long port); -extern void sh7751se_outb_p(unsigned char value, unsigned long port); - -extern void sh7751se_insb(unsigned long port, void *addr, unsigned long count); -extern void sh7751se_insw(unsigned long port, void *addr, unsigned long count); -extern void sh7751se_insl(unsigned long port, void *addr, unsigned long count); -extern void sh7751se_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh7751se_outsw(unsigned long port, const void *addr, unsigned long count); -extern void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned char sh7751se_readb(unsigned long addr); -extern unsigned short sh7751se_readw(unsigned long addr); -extern unsigned int sh7751se_readl(unsigned long addr); -extern void sh7751se_writeb(unsigned char b, unsigned long addr); -extern void sh7751se_writew(unsigned short b, unsigned long addr); -extern void sh7751se_writel(unsigned int b, unsigned long addr); - -extern unsigned long sh7751se_isa_port2addr(unsigned long offset); - -#endif /* _ASM_SH_IO_7751SE_H */ diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h index d19de7c8df4e..34ca8a7f06ba 100644 --- a/include/asm-sh/setup.h +++ b/include/asm-sh/setup.h @@ -4,5 +4,7 @@ #define COMMAND_LINE_SIZE 256 +int setup_early_printk(char *); + #endif /* _SH_SETUP_H */ #endif /* __KERNEL__ */ diff --git a/include/asm-sh/sfp-machine.h b/include/asm-sh/sfp-machine.h new file mode 100644 index 000000000000..8a6399a8cfe0 --- /dev/null +++ b/include/asm-sh/sfp-machine.h @@ -0,0 +1,86 @@ +/* Machine-dependent software floating-point definitions. + SuperH kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#include <linux/config.h> + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + else \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +//#define FP_ROUNDMODE FPSCR_RM +#define FP_DENORM_ZERO 1/*FPSCR_DN*/ + +/* Exception flags. */ +#define FP_EX_INVALID (1<<4) +#define FP_EX_DIVZERO (1<<3) +#define FP_EX_OVERFLOW (1<<2) +#define FP_EX_UNDERFLOW (1<<1) +#define FP_EX_INEXACT (1<<0) + +#endif + diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h index 25792e9831ea..df3b187ef883 100644 --- a/include/asm-sh/sh03/io.h +++ b/include/asm-sh/sh03/io.h @@ -33,14 +33,6 @@ #define IRL3_IPR_POS 0 #define IRL3_PRIORITY 4 - -extern unsigned long sh03_isa_port2addr(unsigned long offset); - -extern void setup_sh03(void); -extern void init_sh03_IRQ(void); -extern void heartbeat_sh03(void); - -extern void sh03_rtc_gettimeofday(struct timeval *tv); -extern int sh03_rtc_settimeofday(const struct timeval *tv); +void heartbeat_sh03(void); #endif /* _ASM_SH_IO_SH03_H */ diff --git a/include/asm-sh/sh2000/sh2000.h b/include/asm-sh/sh2000/sh2000.h deleted file mode 100644 index 8d547324d59a..000000000000 --- a/include/asm-sh/sh2000/sh2000.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_SH2000_SH2000_H -#define __ASM_SH_SH2000_SH2000_H - -/* arch/sh/boards/sh2000/setup.c */ -extern int setup_sh2000(void); - -#endif /* __ASM_SH_SH2000_SH2000_H */ - diff --git a/include/asm-sh/shmin/shmin.h b/include/asm-sh/shmin/shmin.h new file mode 100644 index 000000000000..36ba138a81fb --- /dev/null +++ b/include/asm-sh/shmin/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h index 0a95604b9b66..ba1758d90106 100644 --- a/include/asm-sh/shmparam.h +++ b/include/asm-sh/shmparam.h @@ -1,8 +1,22 @@ +/* + * include/asm-sh/shmparam.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ #ifndef __ASM_SH_SHMPARAM_H #define __ASM_SH_SHMPARAM_H -#ifdef __KERNEL__ -#include <asm/cpu/shmparam.h> +/* + * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value + * for everyone, and work out the specifics from the probed cache descriptor. + */ +#define SHMLBA 0x4000 /* attach addr a multiple of this */ + +#define __ARCH_FORCE_SHMLBA -#endif /* __KERNEL__ */ #endif /* __ASM_SH_SHMPARAM_H */ diff --git a/include/asm-sh/se/smc37c93x.h b/include/asm-sh/smc37c93x.h index 585da2a8fc45..585da2a8fc45 100644 --- a/include/asm-sh/se/smc37c93x.h +++ b/include/asm-sh/smc37c93x.h diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h index f57c4fe9692a..71ecddf70db3 100644 --- a/include/asm-sh/smp.h +++ b/include/asm-sh/smp.h @@ -19,11 +19,6 @@ #include <asm/atomic.h> #include <asm/current.h> -extern cpumask_t cpu_online_map; -extern cpumask_t cpu_possible_map; - -#define cpu_online(cpu) cpu_isset(cpu, cpu_online_map) - #define raw_smp_processor_id() (current_thread_info()->cpu) /* I've no idea what the real meaning of this is */ diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear.h index bfa97ac06280..6b5e4ddc073a 100644 --- a/include/asm-sh/snapgear/io.h +++ b/include/asm-sh/snapgear.h @@ -40,21 +40,8 @@ #define IRL3_PRIORITY 4 #endif -extern unsigned char snapgear_inb(unsigned long port); -extern unsigned short snapgear_inw(unsigned long port); -extern unsigned int snapgear_inl(unsigned long port); - -extern void snapgear_outb(unsigned char value, unsigned long port); -extern void snapgear_outw(unsigned short value, unsigned long port); -extern void snapgear_outl(unsigned int value, unsigned long port); - -extern unsigned char snapgear_inb_p(unsigned long port); -extern void snapgear_outb_p(unsigned char value, unsigned long port); - -extern void snapgear_insl(unsigned long port, void *addr, unsigned long count); -extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned long snapgear_isa_port2addr(unsigned long offset); +#define __IO_PREFIX snapgear +#include <asm/io_generic.h> #ifdef CONFIG_SH_SECUREEDGE5410 /* @@ -79,14 +66,14 @@ extern unsigned long snapgear_isa_port2addr(unsigned long offset); * D12 - RTS RESET */ - #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) - extern unsigned short secureedge5410_ioport; +#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) +extern unsigned short secureedge5410_ioport; - #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ - (secureedge5410_ioport = \ - ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) - #define SECUREEDGE_READ_IOPORT() \ - ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) +#define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) #endif #endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index ad35ad4958f4..6c1f8fde5ac4 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -6,6 +6,7 @@ * Copyright (C) 2002 Paul Mundt */ +#include <asm/types.h> /* * switch_to() should switch tasks to task nr n, first @@ -66,13 +67,20 @@ static inline void sched_cacheflush(void) { } -#define nop() __asm__ __volatile__ ("nop") - - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#ifdef CONFIG_CPU_SH4A +#define __icbi() \ +{ \ + unsigned long __addr; \ + __addr = 0xa8000000; \ + __asm__ __volatile__( \ + "icbi %0\n\t" \ + : /* no output */ \ + : "m" (__m(__addr))); \ +} +#endif -static __inline__ unsigned long tas(volatile int *m) -{ /* #define tas(ptr) (xchg((ptr),1)) */ +static inline unsigned long tas(volatile int *m) +{ unsigned long retval; __asm__ __volatile__ ("tas.b @%1\n\t" @@ -81,12 +89,33 @@ static __inline__ unsigned long tas(volatile int *m) return retval; } -extern void __xchg_called_with_bad_pointer(void); - -#define mb() __asm__ __volatile__ ("": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("": : :"memory") +/* + * A brief note on ctrl_barrier(), the control register write barrier. + * + * Legacy SH cores typically require a sequence of 8 nops after + * modification of a control register in order for the changes to take + * effect. On newer cores (like the sh4a and sh5) this is accomplished + * with icbi. + * + * Also note that on sh4a in the icbi case we can forego a synco for the + * write barrier, as it's not necessary for control registers. + * + * Historically we have only done this type of barrier for the MMUCR, but + * it's also necessary for the CCR, so we make it generic here instead. + */ +#ifdef CONFIG_CPU_SH4A +#define mb() __asm__ __volatile__ ("synco": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("synco": : :"memory") +#define ctrl_barrier() __icbi() +#define read_barrier_depends() do { } while(0) +#else +#define mb() __asm__ __volatile__ ("": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("": : :"memory") +#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") #define read_barrier_depends() do { } while(0) +#endif #ifdef CONFIG_SMP #define smp_mb() mb() @@ -103,7 +132,8 @@ extern void __xchg_called_with_bad_pointer(void); #define set_mb(var, value) do { xchg(&var, value); } while (0) /* Interrupt Control */ -static __inline__ void local_irq_enable(void) +#ifdef CONFIG_CPU_HAS_SR_RB +static inline void local_irq_enable(void) { unsigned long __dummy0, __dummy1; @@ -116,8 +146,22 @@ static __inline__ void local_irq_enable(void) : "1" (~0x000000f0) : "memory"); } +#else +static inline void local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory"); +} +#endif -static __inline__ void local_irq_disable(void) +static inline void local_irq_disable(void) { unsigned long __dummy; __asm__ __volatile__("stc sr, %0\n\t" @@ -128,6 +172,31 @@ static __inline__ void local_irq_disable(void) : "memory"); } +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ("stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory"); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ("stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory"); +} + #define local_save_flags(x) \ __asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" ) @@ -138,7 +207,7 @@ static __inline__ void local_irq_disable(void) (flags != 0); \ }) -static __inline__ unsigned long local_irq_save(void) +static inline unsigned long local_irq_save(void) { unsigned long flags, __dummy; @@ -154,35 +223,9 @@ static __inline__ unsigned long local_irq_save(void) return flags; } -#ifdef DEBUG_CLI_STI -static __inline__ void local_irq_restore(unsigned long x) -{ - if ((x & 0x000000f0) != 0x000000f0) - local_irq_enable(); - else { - unsigned long flags; - local_save_flags(flags); - - if (flags == 0) { - extern void dump_stack(void); - printk(KERN_ERR "BUG!\n"); - dump_stack(); - local_irq_disable(); - } - } -} -#else -#define local_irq_restore(x) do { \ - if ((x & 0x000000f0) != 0x000000f0) \ - local_irq_enable(); \ -} while (0) -#endif - -#define really_restore_flags(x) do { \ +#define local_irq_restore(x) do { \ if ((x & 0x000000f0) != 0x000000f0) \ - local_irq_enable(); \ - else \ - local_irq_disable(); \ + local_irq_enable(); \ } while (0) /* @@ -210,8 +253,8 @@ do { \ #define back_to_P1() \ do { \ unsigned long __dummy; \ + ctrl_barrier(); \ __asm__ __volatile__( \ - "nop;nop;nop;nop;nop;nop;nop\n\t" \ "mov.l 1f, %0\n\t" \ "jmp @%0\n\t" \ " nop\n\t" \ @@ -224,7 +267,7 @@ do { \ /* For spinlocks etc */ #define local_irq_save(x) x = local_irq_save() -static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) { unsigned long flags, retval; @@ -235,7 +278,7 @@ static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) return retval; } -static __inline__ unsigned long xchg_u8(volatile unsigned char * m, unsigned long val) +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) { unsigned long flags, retval; @@ -246,20 +289,70 @@ static __inline__ unsigned long xchg_u8(volatile unsigned char * m, unsigned lon return retval; } -static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg_ptr = (ptr); \ + switch (size) { \ + case 4: \ + __xchg__res = xchg_u32(__xchg_ptr, x); \ + break; \ + case 1: \ + __xchg__res = xchg_u8(__xchg_ptr, x); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + __xchg__res = x; \ + break; \ + } \ + \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, + unsigned long new, int size) { switch (size) { case 4: - return xchg_u32(ptr, x); - break; - case 1: - return xchg_u8(ptr, x); - break; + return __cmpxchg_u32(ptr, old, new); } - __xchg_called_with_bad_pointer(); - return x; + __cmpxchg_called_with_bad_pointer(); + return old; } +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + /* XXX * disable hlt during certain critical i/o operations */ diff --git a/include/asm-sh/systemh/io.h b/include/asm-sh/systemh/io.h deleted file mode 100644 index 327849b49db8..000000000000 --- a/include/asm-sh/systemh/io.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/systemh/io.h - * - * Stupid I/O definitions for SystemH, cloned from SE7751. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_SYSTEMH_IO_H -#define __ASM_SH_SYSTEMH_IO_H - -extern unsigned char sh7751systemh_inb(unsigned long port); -extern unsigned short sh7751systemh_inw(unsigned long port); -extern unsigned int sh7751systemh_inl(unsigned long port); - -extern void sh7751systemh_outb(unsigned char value, unsigned long port); -extern void sh7751systemh_outw(unsigned short value, unsigned long port); -extern void sh7751systemh_outl(unsigned int value, unsigned long port); - -extern unsigned char sh7751systemh_inb_p(unsigned long port); -extern void sh7751systemh_outb_p(unsigned char value, unsigned long port); - -extern void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count); -extern void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count); -extern void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count); -extern void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count); -extern void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned char sh7751systemh_readb(unsigned long addr); -extern unsigned short sh7751systemh_readw(unsigned long addr); -extern unsigned int sh7751systemh_readl(unsigned long addr); -extern void sh7751systemh_writeb(unsigned char b, unsigned long addr); -extern void sh7751systemh_writew(unsigned short b, unsigned long addr); -extern void sh7751systemh_writel(unsigned int b, unsigned long addr); - -extern unsigned long sh7751systemh_isa_port2addr(unsigned long offset); - -#endif /* __ASM_SH_SYSTEMH_IO_H */ - diff --git a/include/asm-sh/systemh/7751systemh.h b/include/asm-sh/systemh7751.h index 4170531bdbd9..b143bb2a2ca7 100644 --- a/include/asm-sh/systemh/7751systemh.h +++ b/include/asm-sh/systemh7751.h @@ -65,4 +65,7 @@ #define IRQ_79C973 13 +#define __IO_PREFIX sh7751systemh +#include <asm/io_generic.h> + #endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 7345350d98c0..3ebc3f9039eb 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -9,8 +9,8 @@ * Copyright (C) 2002 David Howells (dhowells@redhat.com) * - Incorporating suggestions made by Linus Torvalds and Dave Miller */ - #ifdef __KERNEL__ +#include <asm/page.h> #ifndef __ASSEMBLY__ #include <asm/processor.h> @@ -21,7 +21,10 @@ struct thread_info { unsigned long flags; /* low level flags */ __u32 cpu; int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* thread address space */ struct restart_block restart_block; + unsigned long previous_sp; /* sp of previous stack in case + of nested IRQ stacks */ __u8 supervisor_stack[0]; }; @@ -29,6 +32,13 @@ struct thread_info { #define PREEMPT_ACTIVE 0x10000000 +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (PAGE_SIZE) +#else +#define THREAD_SIZE (PAGE_SIZE * 2) +#endif +#define STACK_WARN (THREAD_SIZE / 8) + /* * macros/functions for gaining access to the thread information structure */ @@ -40,6 +50,7 @@ struct thread_info { .flags = 0, \ .cpu = 0, \ .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ .restart_block = { \ .fn = do_no_restart_syscall, \ }, \ @@ -48,24 +59,42 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("r15") __attribute_used__; + /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; +#ifdef CONFIG_CPU_HAS_SR_RB __asm__("stc r7_bank, %0" : "=r" (ti)); +#else + unsigned long __dummy; + + __asm__ __volatile__ ( + "mov r15, %0\n\t" + "and %1, %0\n\t" + : "=&r" (ti), "=r" (__dummy) + : "1" (~(THREAD_SIZE - 1)) + : "memory"); +#endif + return ti; } /* thread information allocation */ -#define THREAD_SIZE (2*PAGE_SIZE) -#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif +#define free_thread_info(ti) kfree(ti) #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ #define GET_THREAD_INFO(reg) \ - stc r7_bank, reg + stc r7_bank, reg #endif @@ -79,18 +108,18 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ #define TIF_SIGPENDING 2 /* signal pending */ #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 -#define TIF_USERSPACE 31 /* true if FS sets userspace */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_USERSPACE (1<<TIF_USERSPACE) #define _TIF_WORK_MASK 0x000000FE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x000000FF /* work to do on any return to u-space */ diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index dd6579c0b04c..c7ab28095ba0 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -6,6 +6,8 @@ struct sys_timer_ops { int (*init)(void); + int (*start)(void); + int (*stop)(void); unsigned long (*get_offset)(void); unsigned long (*get_frequency)(void); }; diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h new file mode 100644 index 000000000000..270a4f4bc8a9 --- /dev/null +++ b/include/asm-sh/titan.h @@ -0,0 +1,43 @@ +/* + * Platform defintions for Titan + */ + +#ifndef _ASM_SH_TITAN_TITAN_H +#define _ASM_SH_TITAN_TITAN_H + +#define __IO_PREFIX titan +#include <asm/io_generic.h> + +/* IRQ assignments */ +#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ +#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ +#define TITAN_IRQ_MPCIA 8 /* mPCI A */ +#define TITAN_IRQ_MPCIB 11 /* mPCI B */ +#define TITAN_IRQ_USB 11 /* USB */ + +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ +#define IRL0_IRQ 0 +#define IRL0_IPR_ADDR INTC_IPRD +#define IRL0_IPR_POS 3 +#define IRL0_PRIORITY 8 + +#define IRL1_IRQ 1 +#define IRL1_IPR_ADDR INTC_IPRD +#define IRL1_IPR_POS 2 +#define IRL1_PRIORITY 8 + +#define IRL2_IRQ 2 +#define IRL2_IPR_ADDR INTC_IPRD +#define IRL2_IPR_POS 1 +#define IRL2_PRIORITY 8 + +#define IRL3_IRQ 3 +#define IRL3_IPR_ADDR INTC_IPRD +#define IRL3_IPR_POS 0 +#define IRL3_PRIORITY 8 + +#endif diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index 2cb01861e7c5..5c49ed6715f2 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -16,21 +16,9 @@ #include <linux/errno.h> #include <linux/sched.h> -/* - * NOTE: Macro/functions in this file depends on threads_info.h implementation. - * Assumes: - * TI_FLAGS == 8 - * TIF_USERSPACE == 31 - * USER_ADDR_LIMIT == 0x80000000 - */ - #define VERIFY_READ 0 #define VERIFY_WRITE 1 -typedef struct { - unsigned int is_user_space; -} mm_segment_t; - /* * The fs value determines whether argument validity checking should be * performed or not. If get_fs() == USER_DS, checking is performed, with @@ -40,16 +28,18 @@ typedef struct { */ #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define segment_eq(a,b) ((a).is_user_space == (b).is_user_space) -#define USER_ADDR_LIMIT 0x80000000 +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#define KERNEL_DS MAKE_MM_SEG(0) -#define USER_DS MAKE_MM_SEG(1) +#define segment_eq(a,b) ((a).seg == (b).seg) #define get_ds() (KERNEL_DS) #if !defined(CONFIG_MMU) +/* NOMMU is always true */ +#define __addr_ok(addr) (1) + static inline mm_segment_t get_fs(void) { return USER_DS; @@ -76,31 +66,11 @@ static inline int __access_ok(unsigned long addr, unsigned long size) return ((addr >= memory_start) && ((addr + size) < memory_end)); } #else /* CONFIG_MMU */ -static inline mm_segment_t get_fs(void) -{ - return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE)); -} +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) -static inline void set_fs(mm_segment_t s) -{ - unsigned long ti, flag; - __asm__ __volatile__( - "stc r7_bank, %0\n\t" - "mov.l @(8,%0), %1\n\t" - "shal %1\n\t" - "cmp/pl %2\n\t" - "rotcr %1\n\t" - "mov.l %1, @(8,%0)" - : "=&r" (ti), "=&r" (flag) - : "r" (s.is_user_space) - : "t"); -/**** - if (s.is_user_space) - set_thread_flag(TIF_USERSPACE); - else - clear_thread_flag(TIF_USERSPACE); -****/ -} +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) /* * __access_ok: Check if address with size is OK or not. @@ -108,7 +78,7 @@ static inline void set_fs(mm_segment_t s) * We do three checks: * (1) is it user space? * (2) addr + size --> carry? - * (3) addr + size >= 0x80000000 (USER_ADDR_LIMIT) + * (3) addr + size >= 0x80000000 (PAGE_OFFSET) * * (1) (2) (3) | RESULT * 0 0 0 | ok @@ -201,6 +171,7 @@ do { \ __gu_err; \ }) +#ifdef CONFIG_MMU #define __get_user_check(x,ptr,size) \ ({ \ long __gu_err, __gu_val; \ @@ -290,6 +261,18 @@ __asm__("stc r7_bank, %1\n\t" \ : "r" (addr) \ : "t"); \ }) +#else /* CONFIG_MMU */ +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + if (__access_ok((unsigned long)(ptr), (size))) { \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + } else \ + __gu_err = -EFAULT; \ + __gu_err; \ +}) +#endif #define __get_user_asm(x, addr, err, insn) \ ({ \ @@ -541,7 +524,7 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) "3:\n\t" "mov.l 4f, %1\n\t" "jmp @%1\n\t" - " mov %5, %0\n" + " mov #0, %0\n" ".balign 4\n" "4: .long 2b\n" ".previous\n" @@ -550,26 +533,20 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) " .long 1b,3b\n" ".previous" : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n), "i" (-EFAULT) + : "0" (0), "r" (__s), "r" (__n) : "t"); return res; } static __inline__ long strnlen_user(const char __user *s, long n) { - if (!access_ok(VERIFY_READ, s, n)) + if (!__addr_ok(s)) return 0; else return __strnlen_user(s, n); } -static __inline__ long strlen_user(const char __user *s) -{ - if (!access_ok(VERIFY_READ, s, 0)) - return 0; - else - return __strnlen_user(s, ~0UL >> 1); -} +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) /* * The exception table consists of pairs of addresses: the first is the diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index da127d7901af..5d5e9f94def5 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -292,17 +292,40 @@ #define __NR_mq_getsetattr (__NR_mq_open+5) #define __NR_kexec_load 283 #define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_newfstatat 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 - -#define NR_syscalls 293 +#define NR_syscalls 317 #ifdef __KERNEL__ @@ -447,6 +470,7 @@ __syscall_return(type,__sc0); \ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND #ifdef __KERNEL_SYSCALLS__ diff --git a/include/asm-sh/rts7751r2d/voyagergx_reg.h b/include/asm-sh/voyagergx.h index f031b5d6cf54..99b0807d1c9f 100644 --- a/include/asm-sh/rts7751r2d/voyagergx_reg.h +++ b/include/asm-sh/voyagergx.h @@ -1,5 +1,5 @@ /* -------------------------------------------------------------------- */ -/* voyagergx_reg.h */ +/* voyagergx.h */ /* -------------------------------------------------------------------- */ /* This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h index 09ca41972a11..d19ea62ef8c6 100644 --- a/include/asm-sh/watchdog.h +++ b/include/asm-sh/watchdog.h @@ -62,7 +62,6 @@ /** * sh_wdt_read_cnt - Read from Counter - * * Reads back the WTCNT value. */ static inline __u8 sh_wdt_read_cnt(void) @@ -72,7 +71,6 @@ static inline __u8 sh_wdt_read_cnt(void) /** * sh_wdt_write_cnt - Write to Counter - * * @val: Value to write * * Writes the given value @val to the lower byte of the timer counter. @@ -95,7 +93,6 @@ static inline __u8 sh_wdt_read_csr(void) /** * sh_wdt_write_csr - Write to Control/Status Register - * * @val: Value to write * * Writes the given value @val to the lower byte of the control/status |