diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-sh/bigsur/bigsur.h | 80 | ||||
| -rw-r--r-- | include/asm-sh/bigsur/io.h | 35 | ||||
| -rw-r--r-- | include/asm-sh/bigsur/serial.h | 24 | ||||
| -rw-r--r-- | include/asm-sh/ec3104/ec3104.h | 43 | ||||
| -rw-r--r-- | include/asm-sh/ec3104/io.h | 16 | ||||
| -rw-r--r-- | include/asm-sh/ec3104/keyboard.h | 15 | ||||
| -rw-r--r-- | include/asm-sh/ec3104/serial.h | 20 | ||||
| -rw-r--r-- | include/asm-sh/irq.h | 4 | ||||
| -rw-r--r-- | include/asm-sh/serial.h | 6 |
9 files changed, 0 insertions, 243 deletions
diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h deleted file mode 100644 index 427245f93589..000000000000 --- a/include/asm-sh/bigsur/bigsur.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * Hitachi Big Sur Eval Board support - * - * Dustin McIntire (dustin@sensoria.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Derived from Hitachi SH7751 reference manual - * - */ - -#ifndef _ASM_BIGSUR_H_ -#define _ASM_BIGSUR_H_ - -#include <asm/irq.h> -#include <asm/hd64465/hd64465.h> - -/* 7751 Internal IRQ's used by external CPLD controller */ -#define BIGSUR_IRQ_LOW 0 -#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */ -#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM) -#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */ -#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \ - BIGSUR_2NDLVL_IRQ_NUM) - -/* PCI interrupt base number (A_INTA-A_INTD) */ -#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10) - -/* CPLD registers and external chip addresses */ -#define BIGSUR_HD64464_ADDR 0xB2000000 -#define BIGSUR_DGDR 0xB1FFFE00 -#define BIGSUR_BIDR 0xB1FFFD00 -#define BIGSUR_CSLR 0xB1FFFC00 -#define BIGSUR_SW1R 0xB1FFFB00 -#define BIGSUR_DBGR 0xB1FFFA00 -#define BIGSUR_BDTR 0xB1FFF900 -#define BIGSUR_BDRR 0xB1FFF800 -#define BIGSUR_PPR1 0xB1FFF700 -#define BIGSUR_PPR2 0xB1FFF600 -#define BIGSUR_IDE2 0xB1FFF500 -#define BIGSUR_IDE3 0xB1FFF400 -#define BIGSUR_SPCR 0xB1FFF300 -#define BIGSUR_ETHR 0xB1FE0000 -#define BIGSUR_PPDR 0xB1FDFF00 -#define BIGSUR_ICTL 0xB1FDFE00 -#define BIGSUR_ICMD 0xB1FDFD00 -#define BIGSUR_DMA0 0xB1FDFC00 -#define BIGSUR_DMA1 0xB1FDFB00 -#define BIGSUR_IRQ0 0xB1FDFA00 -#define BIGSUR_IRQ1 0xB1FDF900 -#define BIGSUR_IRQ2 0xB1FDF800 -#define BIGSUR_IRQ3 0xB1FDF700 -#define BIGSUR_IMR0 0xB1FDF600 -#define BIGSUR_IMR1 0xB1FDF500 -#define BIGSUR_IMR2 0xB1FDF400 -#define BIGSUR_IMR3 0xB1FDF300 -#define BIGSUR_IRLMR0 0xB1FDF200 -#define BIGSUR_IRLMR1 0xB1FDF100 -#define BIGSUR_V320USC_ADDR 0xB1000000 -#define BIGSUR_HD64465_ADDR 0xB0000000 -#define BIGSUR_INTERNAL_BASE 0xB0000000 - -/* SMC ethernet card parameters */ -#define BIGSUR_ETHER_IOPORT 0x220 - -/* IDE register paramters */ -#define BIGSUR_IDECMD_IOPORT 0x1f0 -#define BIGSUR_IDECTL_IOPORT 0x1f8 - -/* LED bit position in BIGSUR_CSLR */ -#define BIGSUR_LED (1<<4) - -/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ -#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB -#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB - -#endif /* _ASM_BIGSUR_H_ */ diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h deleted file mode 100644 index 1470ac8d4a39..000000000000 --- a/include/asm-sh/bigsur/io.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/bigsur/io.h - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#ifndef _ASM_SH_IO_BIGSUR_H -#define _ASM_SH_IO_BIGSUR_H - -#include <linux/types.h> - -extern unsigned long bigsur_isa_port2addr(unsigned long offset); -extern int bigsur_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void bigsur_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void bigsur_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int bigsur_io_debug; -/* Map a range of ports to a range of kernel virtual memory. */ -extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift); -extern void bigsur_port_unmap(u32 baseport, u32 nports); - -#endif /* _ASM_SH_IO_BIGSUR_H */ - diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h deleted file mode 100644 index a08fa82fe45a..000000000000 --- a/include/asm-sh/bigsur/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-sh/bigsur/serial.h - * - * Configuration details for Big Sur 16550 based serial ports - * i.e. HD64465, PCMCIA, etc. - */ - -#ifndef _ASM_SERIAL_BIGSUR_H -#define _ASM_SERIAL_BIGSUR_H -#include <asm/hd64465.h> - -#define BASE_BAUD (3379200 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) - -#endif /* _ASM_SERIAL_BIGSUR_H */ diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h deleted file mode 100644 index 639cfa489c8f..000000000000 --- a/include/asm-sh/ec3104/ec3104.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef __ASM_EC3104_H -#define __ASM_EC3104_H - - -/* - * Most of the register set is at 0xb0ec0000 - 0xb0ecffff. - * - * as far as I've figured it out the register map is: - * 0xb0ec0000 - id string - * 0xb0ec0XXX - power management - * 0xb0ec1XXX - interrupt control - * 0xb0ec3XXX - ps2 port (touch pad on aero 8000) - * 0xb0ec6XXX - i2c - * 0xb0ec7000 - first serial port (proprietary connector on aero 8000) - * 0xb0ec8000 - second serial port - * 0xb0ec9000 - third serial port - * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000) - * 0xb0eccXXX - GPIO - * 0xb0ecdXXX - GPIO - */ - -#define EC3104_BASE 0xb0ec0000 - -#define EC3104_SER4_DATA (EC3104_BASE+0xa000) -#define EC3104_SER4_IIR (EC3104_BASE+0xa008) -#define EC3104_SER4_MCR (EC3104_BASE+0xa010) -#define EC3104_SER4_LSR (EC3104_BASE+0xa014) -#define EC3104_SER4_MSR (EC3104_BASE+0xa018) - -/* - * our ISA bus. this seems to be real ISA. - */ -#define EC3104_ISA_BASE 0xa5000000 - -#define EC3104_IRQ 11 -#define EC3104_IRQBASE 64 - -#define EC3104_IRQ_SER1 EC3104_IRQBASE + 7 -#define EC3104_IRQ_SER2 EC3104_IRQBASE + 8 -#define EC3104_IRQ_SER3 EC3104_IRQBASE + 9 -#define EC3104_IRQ_SER4 EC3104_IRQBASE + 10 - -#endif /* __ASM_EC3104_H */ diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h deleted file mode 100644 index ea5c8e65ac11..000000000000 --- a/include/asm-sh/ec3104/io.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_SH_IO_EC3104_H -#define _ASM_SH_IO_EC3104_H - -#include <linux/types.h> - -extern unsigned char ec3104_inb(unsigned long port); -extern unsigned short ec3104_inw(unsigned long port); -extern unsigned long ec3104_inl(unsigned long port); - -extern void ec3104_outb(unsigned char value, unsigned long port); -extern void ec3104_outw(unsigned short value, unsigned long port); -extern void ec3104_outl(unsigned long value, unsigned long port); - -extern int ec3104_irq_demux(int irq); - -#endif /* _ASM_SH_IO_EC3104_H */ diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h deleted file mode 100644 index c1253a683197..000000000000 --- a/include/asm-sh/ec3104/keyboard.h +++ /dev/null @@ -1,15 +0,0 @@ -extern unsigned char ec3104_kbd_sysrq_xlate[]; -extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int ec3104_kbd_getkeycode(unsigned int scancode); -extern int ec3104_kbd_translate(unsigned char, unsigned char *, char); -extern char ec3104_kbd_unexpected_up(unsigned char); -extern void ec3104_kbd_leds(unsigned char); -extern void ec3104_kbd_init_hw(void); - -#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate -#define kbd_setkeycode ec3104_kbd_setkeycode -#define kbd_getkeycode ec3104_kbd_getkeycode -#define kbd_translate ec3104_kbd_translate -#define kbd_unexpected_up ec3104_kbd_unexpected_up -#define kbd_leds ec3104_kbd_leds -#define kbd_init_hw ec3104_kbd_init_hw diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h deleted file mode 100644 index cfe4d78ec1ee..000000000000 --- a/include/asm-sh/ec3104/serial.h +++ /dev/null @@ -1,20 +0,0 @@ -#include <asm/ec3104.h> -/* Naturally we don't know the exact value but 115200 baud has a divisor - * of 9 and 19200 baud has a divisor of 52, so this seems like a good - * guess. */ -#define BASE_BAUD (16800000 / 16) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -/* there is a fourth serial port with the expected values as well, but - * it's got the keyboard controller behind it so we can't really use it - * (without moving the keyboard driver to userspace, which doesn't sound - * like a very good idea) */ -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index bff965ef4b95..8ccf7ae593ef 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -66,12 +66,8 @@ /* 3. OFFCHIP_NR_IRQS */ #if defined(CONFIG_HD64461) # define OFFCHIP_NR_IRQS 18 -#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */ -# define OFFCHIP_NR_IRQS 48 #elif defined(CONFIG_HD64465) # define OFFCHIP_NR_IRQS 16 -#elif defined (CONFIG_SH_EC3104) -# define OFFCHIP_NR_IRQS 16 #elif defined (CONFIG_SH_DREAMCAST) # define OFFCHIP_NR_IRQS 96 #elif defined (CONFIG_SH_TITAN) diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h index 8734590d27e8..4ac0e7810812 100644 --- a/include/asm-sh/serial.h +++ b/include/asm-sh/serial.h @@ -9,11 +9,6 @@ #include <linux/kernel.h> -#ifdef CONFIG_SH_EC3104 -#include <asm/serial-ec3104.h> -#elif defined (CONFIG_SH_BIGSUR) -#include <asm/serial-bigsur.h> -#else /* * This assumes you have a 1.8432 MHz clock for your UART. * @@ -41,5 +36,4 @@ #endif -#endif #endif /* _ASM_SERIAL_H */ |