diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 153 | ||||
| -rw-r--r-- | init/do_mounts.c | 4 | ||||
| -rw-r--r-- | init/do_mounts_initrd.c | 7 | ||||
| -rw-r--r-- | init/init_task.c | 2 | ||||
| -rw-r--r-- | init/initramfs.c | 8 | ||||
| -rw-r--r-- | init/main.c | 24 |
6 files changed, 128 insertions, 70 deletions
diff --git a/init/Kconfig b/init/Kconfig index 7d30240e5bfe..22616cd434bc 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -20,12 +20,8 @@ config CONSTRUCTORS bool depends on !UML -config HAVE_IRQ_WORK - bool - config IRQ_WORK bool - depends on HAVE_IRQ_WORK config BUILDTIME_EXTABLE_SORT bool @@ -33,35 +29,8 @@ config BUILDTIME_EXTABLE_SORT menu "General setup" config EXPERIMENTAL - bool "Prompt for development and/or incomplete code/drivers" - ---help--- - Some of the various things that Linux supports (such as network - drivers, file systems, network protocols, etc.) can be in a state - of development where the functionality, stability, or the level of - testing is not yet high enough for general use. This is usually - known as the "alpha-test" phase among developers. If a feature is - currently in alpha-test, then the developers usually discourage - uninformed widespread use of this feature by the general public to - avoid "Why doesn't this work?" type mail messages. However, active - testing and use of these systems is welcomed. Just be aware that it - may not meet the normal level of reliability or it may fail to work - in some special cases. Detailed bug reports from people familiar - with the kernel internals are usually welcomed by the developers - (before submitting bug reports, please read the documents - <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>, - <file:Documentation/BUG-HUNTING>, and - <file:Documentation/oops-tracing.txt> in the kernel source). - - This option will also make obsoleted drivers available. These are - drivers that have been replaced by something else, and/or are - scheduled to be removed in a future kernel release. - - Unless you intend to help test and develop a feature or driver that - falls into this category, or you have a situation that requires - using these features, you should probably say N here, which will - cause the configurator to present you with fewer choices. If - you say Y here, you will be offered the choice of using features or - drivers that are currently considered to be in the alpha-test phase. + bool + default y config BROKEN bool @@ -247,7 +216,7 @@ config SYSVIPC_SYSCTL config POSIX_MQUEUE bool "POSIX Message Queues" - depends on NET && EXPERIMENTAL + depends on NET ---help--- POSIX variant of message queues is a part of IPC. In POSIX message queues every message has a priority which decides about succession @@ -326,10 +295,13 @@ source "kernel/time/Kconfig" menu "CPU/Task time and stats accounting" +config VIRT_CPU_ACCOUNTING + bool + choice prompt "Cputime accounting" default TICK_CPU_ACCOUNTING if !PPC64 - default VIRT_CPU_ACCOUNTING if PPC64 + default VIRT_CPU_ACCOUNTING_NATIVE if PPC64 # Kind of a stub config for the pure tick based cputime accounting config TICK_CPU_ACCOUNTING @@ -342,9 +314,10 @@ config TICK_CPU_ACCOUNTING If unsure, say Y. -config VIRT_CPU_ACCOUNTING +config VIRT_CPU_ACCOUNTING_NATIVE bool "Deterministic task and CPU time accounting" depends on HAVE_VIRT_CPU_ACCOUNTING + select VIRT_CPU_ACCOUNTING help Select this option to enable more accurate task and CPU time accounting. This is done by reading a CPU counter on each @@ -354,6 +327,23 @@ config VIRT_CPU_ACCOUNTING this also enables accounting of stolen time on logically-partitioned systems. +config VIRT_CPU_ACCOUNTING_GEN + bool "Full dynticks CPU time accounting" + depends on HAVE_CONTEXT_TRACKING && 64BIT + select VIRT_CPU_ACCOUNTING + select CONTEXT_TRACKING + help + Select this option to enable task and CPU time accounting on full + dynticks systems. This accounting is implemented by watching every + kernel-user boundaries using the context tracking subsystem. + The accounting is thus performed at the expense of some significant + overhead. + + For now this is only useful if you are working on the full + dynticks subsystem development. + + If unsure, say N. + config IRQ_TIME_ACCOUNTING bool "Fine granularity task level IRQ time accounting" depends on HAVE_IRQ_TIME_ACCOUNTING @@ -393,7 +383,7 @@ config BSD_PROCESS_ACCT_V3 at <http://www.gnu.org/software/acct/>. config TASKSTATS - bool "Export task/process statistics through netlink (EXPERIMENTAL)" + bool "Export task/process statistics through netlink" depends on NET default n help @@ -406,7 +396,7 @@ config TASKSTATS Say N if unsure. config TASK_DELAY_ACCT - bool "Enable per-task delay accounting (EXPERIMENTAL)" + bool "Enable per-task delay accounting" depends on TASKSTATS help Collect information on time spent by a task waiting for system @@ -417,7 +407,7 @@ config TASK_DELAY_ACCT Say N if unsure. config TASK_XACCT - bool "Enable extended accounting over taskstats (EXPERIMENTAL)" + bool "Enable extended accounting over taskstats" depends on TASKSTATS help Collect extended task accounting data and send the data @@ -426,7 +416,7 @@ config TASK_XACCT Say N if unsure. config TASK_IO_ACCOUNTING - bool "Enable per-task storage I/O accounting (EXPERIMENTAL)" + bool "Enable per-task storage I/O accounting" depends on TASK_XACCT help Collect information on the number of bytes of storage I/O which this @@ -453,7 +443,7 @@ config TREE_RCU config TREE_PREEMPT_RCU bool "Preemptible tree-based hierarchical RCU" - depends on PREEMPT && SMP + depends on PREEMPT help This option selects the RCU implementation that is designed for very large SMP systems with hundreds or @@ -461,6 +451,8 @@ config TREE_PREEMPT_RCU is also required. It also scales down nicely to smaller systems. + Select this option if you are unsure. + config TINY_RCU bool "UP-only small-memory-footprint RCU" depends on !PREEMPT && !SMP @@ -486,6 +478,14 @@ config PREEMPT_RCU This option enables preemptible-RCU code that is common between the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations. +config RCU_STALL_COMMON + def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE ) + help + This option enables RCU CPU stall code that is common between + the TINY and TREE variants of RCU. The purpose is to allow + the tiny variants to disable RCU CPU stall warnings, while + making these warnings mandatory for the tree variants. + config CONTEXT_TRACKING bool @@ -880,8 +880,8 @@ config MEMCG_SWAP_ENABLED select this option (if, for some reason, they need to disable it then swapaccount=0 does the trick). config MEMCG_KMEM - bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)" - depends on MEMCG && EXPERIMENTAL + bool "Memory Resource Controller Kernel Memory accounting" + depends on MEMCG depends on SLUB || SLAB help The Kernel Memory extension for Memory Resource Controller can limit @@ -893,7 +893,7 @@ config MEMCG_KMEM config CGROUP_HUGETLB bool "HugeTLB Resource Controller for Control Groups" - depends on RESOURCE_COUNTERS && HUGETLB_PAGE && EXPERIMENTAL + depends on RESOURCE_COUNTERS && HUGETLB_PAGE default n help Provides a cgroup Resource Controller for HugeTLB pages. @@ -932,7 +932,6 @@ config FAIR_GROUP_SCHED config CFS_BANDWIDTH bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED" - depends on EXPERIMENTAL depends on FAIR_GROUP_SCHED default n help @@ -944,7 +943,6 @@ config CFS_BANDWIDTH config RT_GROUP_SCHED bool "Group scheduling for SCHED_RR/FIFO" - depends on EXPERIMENTAL depends on CGROUP_SCHED default n help @@ -1026,8 +1024,7 @@ config IPC_NS different IPC objects in different namespaces. config USER_NS - bool "User namespace (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "User namespace" depends on UIDGID_CONVERTED select UIDGID_STRICT_TYPE_CHECKS @@ -1035,6 +1032,13 @@ config USER_NS help This allows containers, i.e. vservers, to use user namespaces to provide different user info for different servers. + + When user namespaces are enabled in the kernel it is + recommended that the MEMCG and MEMCG_KMEM options also be + enabled and that user-space use the memory control groups to + limit the amount of memory a memory unprivileged users can + use. + If unsure, say N. config PID_NS @@ -1063,20 +1067,7 @@ config UIDGID_CONVERTED bool default y - # Networking - depends on NET_9P = n - # Filesystems - depends on 9P_FS = n - depends on AFS_FS = n - depends on CEPH_FS = n - depends on CIFS = n - depends on CODA_FS = n - depends on GFS2_FS = n - depends on NCP_FS = n - depends on NFSD = n - depends on NFS_FS = n - depends on OCFS2_FS = n depends on XFS_FS = n config UIDGID_STRICT_TYPE_CHECKS @@ -1182,7 +1173,7 @@ config CC_OPTIMIZE_FOR_SIZE Enabling this option will pass "-Os" instead of "-O2" to gcc resulting in a smaller kernel. - If unsure, say Y. + If unsure, say N. config SYSCTL bool @@ -1232,6 +1223,21 @@ config SYSCTL_EXCEPTION_TRACE help Enable support for /proc/sys/debug/exception-trace. +config SYSCTL_ARCH_UNALIGN_NO_WARN + bool + help + Enable support for /proc/sys/kernel/ignore-unaligned-usertrap + Allows arch to define/use @no_unaligned_warning to possibly warn + about unaligned access emulation going on under the hood. + +config SYSCTL_ARCH_UNALIGN_ALLOW + bool + help + Enable support for /proc/sys/kernel/unaligned-trap + Allows arches to define/use @unaligned_enabled to runtime toggle + the unaligned access emulation. + see arch/parisc/kernel/unaligned.c for reference + config KALLSYMS bool "Load all symbols for debugging/ksymoops" if EXPERT default y @@ -1263,6 +1269,7 @@ config HOTPLUG config PRINTK default y bool "Enable support for printk" if EXPERT + select IRQ_WORK help This option enables normal printk support. Removing it eliminates most of the message strings from the kernel image @@ -1608,7 +1615,7 @@ config MODULE_UNLOAD config MODULE_FORCE_UNLOAD bool "Forced module unloading" - depends on MODULE_UNLOAD && EXPERIMENTAL + depends on MODULE_UNLOAD help This option allows you to force a module to unload, even if the kernel believes it is unsafe: the kernel will remove the module @@ -1665,6 +1672,17 @@ config MODULE_SIG_FORCE Reject unsigned modules or signed modules for which we don't have a key. Without this, such modules will simply taint the kernel. +config MODULE_SIG_ALL + bool "Automatically sign all modules" + default y + depends on MODULE_SIG + help + Sign all modules during make modules_install. Without this option, + modules must be signed manually, using the scripts/sign-file tool. + +comment "Do not forget to sign required modules with scripts/sign-file" + depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL + choice prompt "Which hash algorithm should modules be signed with?" depends on MODULE_SIG @@ -1697,6 +1715,15 @@ config MODULE_SIG_SHA512 endchoice +config MODULE_SIG_HASH + string + depends on MODULE_SIG + default "sha1" if MODULE_SIG_SHA1 + default "sha224" if MODULE_SIG_SHA224 + default "sha256" if MODULE_SIG_SHA256 + default "sha384" if MODULE_SIG_SHA384 + default "sha512" if MODULE_SIG_SHA512 + endif # MODULES config INIT_ALL_POSSIBLE diff --git a/init/do_mounts.c b/init/do_mounts.c index 1d1b6348f903..a2b49f2c1bd8 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -81,9 +81,9 @@ struct uuidcmp { * * Returns 1 if the device matches, and 0 otherwise. */ -static int match_dev_by_uuid(struct device *dev, void *data) +static int match_dev_by_uuid(struct device *dev, const void *data) { - struct uuidcmp *cmp = data; + const struct uuidcmp *cmp = data; struct hd_struct *part = dev_to_part(dev); if (!part->info) diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index 5e4ded51788e..a32ec1ce882b 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -36,6 +36,10 @@ __setup("noinitrd", no_initrd); static int init_linuxrc(struct subprocess_info *info, struct cred *new) { sys_unshare(CLONE_FS | CLONE_FILES); + /* stdin/stdout/stderr for /linuxrc */ + sys_open("/dev/console", O_RDWR, 0); + sys_dup(0); + sys_dup(0); /* move initrd over / and chdir/chroot in initrd root */ sys_chdir("/root"); sys_mount(".", "/", NULL, MS_MOVE, NULL); @@ -57,6 +61,9 @@ static void __init handle_initrd(void) sys_mkdir("/old", 0700); sys_chdir("/old"); + /* try loading default modules from initrd */ + load_default_modules(); + /* * In case that a resume from disk is carried out by linuxrc or one of * its children, we need to tell the freezer not to wait for us. diff --git a/init/init_task.c b/init/init_task.c index 8b2f3996b035..ba0a7f362d9e 100644 --- a/init/init_task.c +++ b/init/init_task.c @@ -2,6 +2,8 @@ #include <linux/export.h> #include <linux/mqueue.h> #include <linux/sched.h> +#include <linux/sched/sysctl.h> +#include <linux/sched/rt.h> #include <linux/init.h> #include <linux/fs.h> #include <linux/mm.h> diff --git a/init/initramfs.c b/init/initramfs.c index 84c6bf111300..a67ef9dbda9d 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -592,7 +592,7 @@ static int __init populate_rootfs(void) initrd_end - initrd_start); if (!err) { free_initrd(); - return 0; + goto done; } else { clean_rootfs(); unpack_to_rootfs(__initramfs_start, __initramfs_size); @@ -607,6 +607,7 @@ static int __init populate_rootfs(void) sys_close(fd); free_initrd(); } + done: #else printk(KERN_INFO "Unpacking initramfs...\n"); err = unpack_to_rootfs((char *)initrd_start, @@ -615,6 +616,11 @@ static int __init populate_rootfs(void) printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err); free_initrd(); #endif + /* + * Try loading default modules from initramfs. This gives + * us a chance to load before device_initcalls. + */ + load_default_modules(); } return 0; } diff --git a/init/main.c b/init/main.c index 85d69dffe864..63534a141b4e 100644 --- a/init/main.c +++ b/init/main.c @@ -70,6 +70,8 @@ #include <linux/perf_event.h> #include <linux/file.h> #include <linux/ptrace.h> +#include <linux/blkdev.h> +#include <linux/elevator.h> #include <asm/io.h> #include <asm/bugs.h> @@ -604,7 +606,7 @@ asmlinkage void __init start_kernel(void) pidmap_init(); anon_vma_init(); #ifdef CONFIG_X86 - if (efi_enabled) + if (efi_enabled(EFI_RUNTIME_SERVICES)) efi_enter_virtual_mode(); #endif thread_info_cache_init(); @@ -632,7 +634,7 @@ asmlinkage void __init start_kernel(void) acpi_early_init(); /* before LAPIC and SMP init */ sfi_init_late(); - if (efi_enabled) { + if (efi_enabled(EFI_RUNTIME_SERVICES)) { efi_late_init(); efi_free_boot_services(); } @@ -794,6 +796,17 @@ static void __init do_pre_smp_initcalls(void) do_one_initcall(*fn); } +/* + * This function requests modules which should be loaded by default and is + * called twice right after initrd is mounted and right before init is + * exec'd. If such modules are on either initrd or rootfs, they will be + * loaded before control is passed to userland. + */ +void __init load_default_modules(void) +{ + load_default_elevator_module(); +} + static int run_init_process(const char *init_filename) { argv_init[0] = init_filename; @@ -802,7 +815,7 @@ static int run_init_process(const char *init_filename) (const char __user *const __user *)envp_init); } -static void __init kernel_init_freeable(void); +static noinline void __init kernel_init_freeable(void); static int __ref kernel_init(void *unused) { @@ -845,7 +858,7 @@ static int __ref kernel_init(void *unused) "See Linux Documentation/init.txt for guidance."); } -static void __init kernel_init_freeable(void) +static noinline void __init kernel_init_freeable(void) { /* * Wait until kthreadd is all set-up. @@ -900,4 +913,7 @@ static void __init kernel_init_freeable(void) * we're essentially up and running. Get rid of the * initmem segments and start the user-mode stuff.. */ + + /* rootfs is available now, try loading default modules */ + load_default_modules(); } |