summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-17ARM: shmobile: r8a7790: add thermal driver supportSimon Horman
The current temperature may be read using: cat /sys/class/thermal/thermal_zone0/temp Based on similar work for the r8a73a4 by Kuninori Morimoto. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: add clocks for thermalSimon Horman
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add SMSC ethernet chip to KZM9D DT referenceMagnus Damm
Add support for the SMSC ethernet controller found on the KZM9D board to the KZM9D DT Reference code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: KZM9D DT reference implementationMagnus Damm
Add a DT reference implementation for the KZM9D board. Only DT devices are used in this case. UART, STI, GPIO and SMP / GIC are all provided by emev2.dtsi. There is still a board specific C file used for enabling legacy SH clocks. This file will be removed after we have moved over to common clocks. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: Do not include trailing blank line in board-kzm9d-reference.c ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: add MMCIF and SDHI DT templatesGuennadi Liakhovetski
This adds DT templates for all MMCIF and SDHI controllers on r8a7790. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templatesGuennadi Liakhovetski
This adds DT templates for all MMCIF and SDHI controllers on r8a73a4. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: EMEV2 map_io updateMagnus Damm
Update the EMEV2 struct map_desc to exclude the SMU and also include the ->map_io() callback in the DT version of EMEV2 board support. The EMEV2 SMP code can these days perform ioremap() early on without the SMU information in the io_desc[]. To correctly support SMP in case of DT-only board support then the ->map_io() callback is needed. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Use DT for SMP on EMEV2 and KZM9DMagnus Damm
Rework the EMEV2 SMP code to rely on DT for CPU information instead of reading out number of CPU cores from the SCU. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Use DT for GIC on EMEV2 and KZM9DMagnus Damm
Remove the C version of the EMEV2 GIC setup code, instead rely on GIC information provided by DT. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add GIO to EMEV2 dtsiMagnus Damm
Add GIO0->GIO4 device nodes to the EMEV2 dtsi file. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Update KZM9D dts command lineMagnus Damm
Update the KZM9D DTS command line to remove following cruft: - console=tty0 - no graphic support upstream anyway - earlyprintk= - not supported by the 8250-em driver anyway - mem= - this is provided via DT anyway Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm: add CPUFreq supportGuennadi Liakhovetski
This patch adds OPPs to the CA15 DT node and a max8973 DT node to support clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add I2C controller DT nodesGuennadi Liakhovetski
Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with the i2c-sh_mobile.c driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused mach/dma.hMagnus Damm
Remove mach-shmobile mach/dma.h since it only seems to be used on non-mach-shmobile platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7778: remove r8a7778_init_irq()Kuninori Morimoto
This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Fix EMEV2 clock comment typoMagnus Damm
Update the STI timer frequency comment to 32.768 kHz to fix 37 kHz typo. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Make EMEV2 platform devices more compactMagnus Damm
Convert the EMEV2 SoC device setup code from using very verbose resources and static platform devices to the same style as more recent boards. This reduces the size of the code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused EMEV2/KZM9D early consoleMagnus Damm
Remove EMEV2 early console code from KZM9D and instead rely on console setup during regular platform device probe time. This makes the DT code and the KZM9D board support behave the same. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove redundant r8a7790 callbackMagnus Damm
Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused sh73a0 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused sh7372 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused r8a7779 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused r8a7778 auxdata and callbackMagnus Damm
Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused r8a7740 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused EMEV2 auxdata and callbackMagnus Damm
Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: kzm9g: Remove init_irq declaration in machine descriptionMagnus Damm
Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm <damm@opensource.se> [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the sh73a0 SoC and altered the subject to use the same format as the patch that updates the sh73a0. ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: sh73a0: Remove init_irq declaration in machine descriptionMaxime Ripard
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: lager: Remove init_irq declaration in machine descriptionMagnus Damm
Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm <damm@opensource.se> [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a7790 SoC and altered the subject to use the same format as the patch that updates the r8a7790. ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: Remove init_irq declaration in machine descriptionMaxime Ripard
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm: Remove init_irq declaration in machine descriptionMagnus Damm
Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm <damm@opensource.se> [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a73a4 SoC and altered the subject to use the same format as the patch that updates the r8a73a4. ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: Remove init_irq declaration in machine descriptionMaxime Ripard
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: emev2: Remove init_irq declaration in machine descriptionMaxime Ripard
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: sh73a0 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [ remove const from resource pfc_resources to avoid section miss-match reported by 4.4.5 ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7778: add __initdata on resource and device dataKuninori Morimoto
These data will be kmemdup()'ed on platform_device_add_resources() and platform_device_add_data() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-07-16ARM: shmobile: armadillo800eva: remove left-oversGuennadi Liakhovetski
A comment and a #define in board-armadillo800eva.c have been left over after recent changes and are no longer relevant or needed, remove them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-14Linux 3.11-rc1Linus Torvalds
2013-07-14Merge branch 'slab/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull slab update from Pekka Enberg: "Highlights: - Fix for boot-time problems on some architectures due to init_lock_keys() not respecting kmalloc_caches boundaries (Christoph Lameter) - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim) - Fix for excessive slab freelist draining (Wanpeng Li) - SLUB and SLOB cleanups and fixes (various people)" I ended up editing the branch, and this avoids two commits at the end that were immediately reverted, and I instead just applied the oneliner fix in between myself. * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux slub: Check for page NULL before doing the node_match check mm/slab: Give s_next and s_stop slab-specific names slob: Check for NULL pointer before calling ctor() slub: Make cpu partial slab support configurable slab: add kmalloc() to kernel API documentation slab: fix init_lock_keys slob: use DIV_ROUND_UP where possible slub: do not put a slab to cpu partial list when cpu_partial is 0 mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo mm/slub: Drop unnecessary nr_partials mm/slab: Fix /proc/slabinfo unwriteable for slab mm/slab: Sharing s_next and s_stop between slab and slub mm/slab: Fix drain freelist excessively slob: Rework #ifdeffery in slab.h mm, slab: moved kmem_cache_alloc_node comment to correct place
2013-07-14slub: Check for page NULL before doing the node_match checkSteven Rostedt
In the -rt kernel (mrg), we hit the following dump: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 PGD a2d39067 PUD b1641067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU 3 Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992 RIP: 0010:[<ffffffff811573f1>] [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP: 0018:ffff8800a9b17d70 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000 RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500 RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500 R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000) Stack: ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011 0000000001200011 0000000001200011 0000000000000000 0000000000000000 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd Call Trace: [<ffffffff81202e08>] ? current_has_perm+0x68/0x80 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30 [<ffffffff8104369a>] do_fork+0x5a/0x360 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220 [<ffffffff8100b068>] sys_clone+0x28/0x30 [<ffffffff81527423>] stub_clone+0x13/0x20 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2 RIP [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP <ffff8800a9b17d70> CR2: 0000000000000000 ---[ end trace 0000000000000002 ]--- Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do disable migration. But the SLUB code is relatively lockless, and the spin_locks there are raw_spin_locks (not converted to mutexes), thus I believe this bug can happen in mainline without -rt features. The -rt patch is just good at triggering mainline bugs ;-) Anyway, looking at where this crashed, it seems that the page variable can be NULL when passed to the node_match() function (which does not check if it is NULL). When this happens we get the above panic. As page is only used in slab_alloc() to check if the node matches, if it's NULL I'm assuming that we can say it doesn't and call the __slab_alloc() code. Is this a correct assumption? Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs stuff from Al Viro: "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including making simple_lookup() usable for filesystems with non-NULL s_d_op, which allows us to get rid of quite a bit of ugliness" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sunrpc: now we can just set ->s_d_op cgroup: we can use simple_lookup() now efivarfs: we can use simple_lookup() now make simple_lookup() usable for filesystems that set ->s_d_op configfs: don't open-code d_alloc_name() __rpc_lookup_create_exclusive: pass string instead of qstr rpc_create_*_dir: don't bother with qstr llist: llist_add() can use llist_add_batch() llist: fix/simplify llist_add() and llist_add_batch() fput: turn "list_head delayed_fput_list" into llist_head fs/file_table.c:fput(): add comment Safer ABI for O_TMPFILE
2013-07-14sunrpc: now we can just set ->s_d_opAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14cgroup: we can use simple_lookup() nowAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14efivarfs: we can use simple_lookup() nowAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14make simple_lookup() usable for filesystems that set ->s_d_opAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14configfs: don't open-code d_alloc_name()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14__rpc_lookup_create_exclusive: pass string instead of qstrAl Viro
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14rpc_create_*_dir: don't bother with qstrAl Viro
just pass the name Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Nothing overly exciting here - a couple of new drivers that don't do a great deal, along with some miscellaneous fixes and a couple of small feature enablement patches" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: x86 platform drivers: fix gpio leak toshiba_acpi: Add dependency on SERIO_I8042 asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/U Add trivial driver to disable Intel Smart Connect Add support driver for Intel Rapid Start Technology hp-wmi: add supports for POST code error asus-wmi: control wlan-led only if wapf == 4 drivers/platform/x86/intel_ips: Convert to module_pci_driver asus-nb-wmi: ignore ALS notification key code asus-wmi: append newline to messages x86: asus-laptop: fix invalid point access x86: msi-laptop: fix memleak amilo-rfkill: Add dependency on SERIO_I8042 dell-laptop: fix error return code in dell_init() hp-wmi: Enable hotkeys on some systems
2013-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "An update to Elantech driver to support hardware v7, fix to the new cyttsp4 driver to use proper addressing, ads7846 device tree support and nspire-keypad got a small cleanup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: nspire-keypad - replace magic offset with define Input: elantech - fix for newer hardware versions (v7) Input: cyttsp4 - use 16bit address for I2C/SPI communication Input: ads7846 - add device tree bindings Input: ads7846 - make sure we do not change platform data
2013-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Just a bunch of small fixes and tidy ups: 1) Finish the "busy_poll" renames, from Eliezer Tamir. 2) Fix RCU stalls in IFB driver, from Ding Tianhong. 3) Linearize buffers properly in tun/macvtap zerocopy code. 4) Don't crash on rmmod in vxlan, from Pravin B Shelar. 5) Spinlock used before init in alx driver, from Maarten Lankhorst. 6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry Kravkov. 7) Dummy and ifb driver load failure paths can oops, fixes from Tan Xiaojun and Ding Tianhong. 8) Correct MTU calculations in IP tunnels, from Alexander Duyck. 9) Account all TCP retransmits in SNMP stats properly, from Yuchung Cheng. 10) atl1e and via-rhine do not handle DMA mapping failures properly, from Neil Horman. 11) Various equal-cost multipath route fixes in ipv6 from Hannes Frederic Sowa" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ipv6: only static routes qualify for equal cost multipathing via-rhine: fix dma mapping errors atl1e: fix dma mapping warnings tcp: account all retransmit failures usb/net/r815x: fix cast to restricted __le32 usb/net/r8152: fix integer overflow in expression net: access page->private by using page_private net: strict_strtoul is obsolete, use kstrtoul instead drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe net/usb: add relative mii functions for r815x net/tipc: use %*phC to dump small buffers in hex form qlcnic: Adding Maintainers. gre: Fix MTU sizing check for gretap tunnels pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts pkt_sched: sch_qfq: improve efficiency of make_eligible gso: Update tunnel segmentation to support Tx checksum offload inet: fix spacing in assignment ifb: fix oops when loading the ifb failed ...
2013-07-13Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull final round of SCSI updates from James Bottomley: "This is the remaining set of SCSI patches for the merge window. It's mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas). There are also several bug fixes in fcoe, libfc, and megaraid_sas. We also have a couple of core changes to try to make device destruction more deterministic" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits) [SCSI] scsi constants: command, sense key + additional sense strings fcoe: Reduce number of sparse warnings fcoe: Stop fc_rport_priv structure leak libfcoe: Fix meaningless log statement libfc: Differentiate echange timer cancellation debug statements libfc: Remove extra space in fc_exch_timer_cancel definition fcoe: fix the link error status block sparse warnings fcoe: Fix smatch warning in fcoe_fdmi_info function libfc: Reject PLOGI from nodes with incompatible role [SCSI] enable destruction of blocked devices which fail LUN scanning [SCSI] Fix race between starved list and device removal [SCSI] megaraid_sas: fix a bug for 64 bit arches [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write [SCSI] scsi_debug: simplify offset calculation for dif_storep [SCSI] scsi_debug: invalidate protection info for unmapped region [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1 [SCSI] scsi_debug: fix incorrectly nested kmap_atomic() [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic() [SCSI] mpt3sas: Bump driver version to v02.100.00.00 [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 08:50:44 +0000