summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-01ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endianThomas Petazzoni
The SMP boot on Armada 38x and Armada 375 Z1 is currently broken in big-endian configurations, and this commit fixes it for both platforms. For Armada 375 Z1, the problem was in the armada_375_smp_cpu1_enable_code part of the code that gets copied to the Crypto SRAM as a work-around for an issue of the Z1 stepping. This piece of code was not switching the CPU core to big-endian, and not endian-swapping the value read from the Resume Address register (the value is stored little-endian). Due to the introduction of the conditional 'rev r1, r1' instruction, the offset between the 'ldr r0, [pc, #4]' instruction and the value it was looking is different between LE and BE configurations. To solve this, we instead use one 'adr' instruction followed by one 'ldr'. For Armada 38x, the problem was simply that the CPU core was not switched to big endian in the secondary CPU startup function. This change was tested in LE and BE configurations on Armada 385, Armada 375 Z1 and Armada 375 A0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404228186-21203-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: fix cpuidle implementation to work on big-endian systemsThomas Petazzoni
On Marvell Armada XP, when a CPU comes back from deep idle state of cpuidle, it restarts its execution at armada_370_xp_cpu_resume(), which puts back the CPU into the coherency, and then calls the generic cpu_resume() function. While this works on little-endian configurations, it doesn't work on big-endian configurations because the CPU restarts in little-endian, and therefore must be switched back to big-endian to operate properly. To achieve this, a 'setend be' instruction must be executed in big-endian configurations. However, the ARM_BE8() macro that is used to implement nice compile-time conditional for ARM LE vs. ARM BE8 is not easily usable in inline assembly. Therefore, this patch moves the armada_370_xp_cpu_resume() C function, which was anyway just a block of inline assembly, into a proper pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be) instruction. Without this patch, an Armada XP big endian configuration with cpuidle enabled fails to boot, as it hangs as soon as one of the CPU hits the deep idle state. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanupThomas Petazzoni
Commit 497a92308af8e9385fa3d135f7f416a997e4b93b ("ARM: mvebu: implement L2/PCIe deadlock workaround") introduced some logic in coherency.c to adjust the PL310 cache controller Device Tree node of Armada 375 and Armada 38x platform to include the 'arm,io-coherent' property if the system is running with hardware I/O coherency enabled. However, with the L2CC driver cleanup done by Russell King, the initialization of the L2CC driver has been moved earlier, and is now part of the init_IRQ() ARM function in arch/arm/kernel/irq.c. Therefore, calling coherency_init() in ->init_time() is now too late, as the Device Tree property gets added too late (after the L2CC driver has been initialized). In order to fix this, this commit removes the ->init_time() callback use in board-v7.c and replaces it with an ->init_irq() callback. We therefore no longer use the default ->init_irq() callback, but we now use the default ->init_time() callback. In this newly introduced ->init_irq() callback, we call irqchip_init() which is the default behavior when ->init_irq() isn't defined, and then do the initialization related to the coherency: SCU, coherency fabric, and mvebu-mbus (which is needed to start secondary CPUs). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: move Armada 375 external abort logic as a quirkThomas Petazzoni
In preparation to a small re-organization of the initialization sequence in board-v7.c, this commit moves the registration of the custom external abort handler on Armada 375 later in the boot sequence, and makes it more similar to the other quirks that we already have. There is indeed no need to register this abort handler particularly early, it simply needs to be registered before switching to userspace. In addition to this, this commit makes the registration of the custom abort handler conditional on Armada 375 Z1, because Armada 375 A0 and later iterations are not affected by the issue. This commit was tested on both Armada 375 Z1 and Armada 375 A0 platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-24ARM: mvebu: Fix the improper use of the compatible string armada38x using a ↵Gregory CLEMENT
wildcard Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-23ARM: dts: kirkwood: fix phy-connection-type for GuruplugSebastian Hesselbarth
Commit eeb845459a72e792a959278b858f9c417e9995bd ("ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id") added phy-connection-type properties to ethernet PHY nodes. Actually, the property has to be set for the ethernet port node instead. Fix it by moving the corresponding properties to the correct nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1403555115-13111-1-git-send-email-sebastian.hesselbarth@gmail.com Fixes: eeb845459a72: ('ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id') Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platformsThomas Petazzoni
On Marvell Armada platforms, the PMSU (Power Management Service Unit) controls a number of power management related activities, needed for things like suspend/resume, CPU hotplug, cpuidle or even simply SMP. Since cpuidle support was added for Armada XP, the pmsu.c file in arch/arm/mach-mvebu/ calls the cpu_suspend() and cpu_resume() ARM functions, which are only available when CONFIG_ARM_CPU_SUSPEND=y. Therefore, configurations that have CONFIG_ARM_CPU_SUSPEND disabled due to PM_SLEEP being disabled no longer build properly, due to undefined references to cpu_suspend() and cpu_resume(). To fix this, this patch simply ensures CONFIG_ARM_CPU_SUSPEND is always enabled for Marvell EBU v7 platforms. Doing things in a more fine-grained way would require a lot of #ifdef-ery in pmsu.c to isolate the parts that use cpu_suspend()/cpu_resume(), and those parts would anyway have been needed as soon as either one of suspend/resume, CPU hotplug or cpuidle was enabled. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402488397-31381-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: Fix broken SoC ID detectionEzequiel Garcia
Currently the mvebu boards need to detect the SoC revision in order to apply some quirks needed to workaround issues found on I2C and thermal controllers present only in very early SoC. This detection requires PCI address translation to work, so we need to explicitly select OF_ADDRESS_PCI. This can be considered a partial revert of the following commit, that wrongly removed the option selection: commit 55400f3a1f89e39761f45c19f6e4235a329c400b Author: Rob Herring <robh@kernel.org> Date: Tue Apr 22 14:15:52 2014 -0500 ARM: mvebu: clean-up unneeded kconfig selects Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1402347165-19988-1-git-send-email-ezequiel.garcia@free-electrons.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-15Linux 3.16-rc1Linus Torvalds
2014-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer
2014-06-15Merge tag 'clk-for-linus-3.16-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
2014-06-15Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
2014-06-15net: sctp: fix permissions for rto_alpha and rto_beta knobsDaniel Borkmann
Commit 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15Merge branch 'csum_fixes'David S. Miller
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15vxlan: Checksum fixesTom Herbert
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: add skb_pop_rcv_encapsulationTom Herbert
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15udp: call __skb_checksum_complete when doing full checksumTom Herbert
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: Fix save software checksum completeTom Herbert
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5172927732f51fde ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: Fix GSO constants to match NETIF flagsTom Herbert
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-14Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "This is just a couple of drivers (hpsa and lpfc) that got left out for further testing in linux-next. We also have one fix to a prior submission (qla2xxx sparse)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch lpfc: Update lpfc version to driver version 10.2.8001.0 lpfc: Fix ExpressLane priority setup lpfc: mark old devices as obsolete lpfc: Fix for initializing RRQ bitmap lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries lpfc: Update lpfc version to driver version 10.2.8000.0 lpfc: Update Copyright on changed files from 8.3.45 patches lpfc: Update Copyright on changed files lpfc: Fixed locking for scsi task management commands lpfc: Convert runtime references to old xlane cfg param to fof cfg param lpfc: Fix FW dump using sysfs lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock lpfc: Fixed kernel panic in lpfc_abort_handler lpfc: Fix locking for postbufq when freeing lpfc: Fix locking for lpfc_hba_down_post lpfc: Fix dynamic transitions of FirstBurst from on to off hpsa: fix handling of hpsa_volume_offline return value hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id hpsa: remove messages about volume status VPD inquiry page not supported ...
2014-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This has a few fixes since our last pull and a new ioctl for doing btree searches from userland. It's very similar to the existing ioctl, but lets us return larger items back down to the app" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix error handling in create_pending_snapshot btrfs: fix use of uninit "ret" in end_extent_writepage() btrfs: free ulist in qgroup_shared_accounting() error path Btrfs: fix qgroups sanity test crash or hang btrfs: prevent RCU warning when dereferencing radix tree slot Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting btrfs: new ioctl TREE_SEARCH_V2 btrfs: tree_search, search_ioctl: direct copy to userspace btrfs: new function read_extent_buffer_to_user btrfs: tree_search, copy_to_sk: return needed size on EOVERFLOW btrfs: tree_search, copy_to_sk: return EOVERFLOW for too small buffer btrfs: tree_search, search_ioctl: accept varying buffer btrfs: tree_search: eliminate redundant nr_items check
2014-06-14Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds
Pull aio fix and cleanups from Ben LaHaise: "This consists of a couple of code cleanups plus a minor bug fix" * git://git.kvack.org/~bcrl/aio-next: aio: cleanup: flatten kill_ioctx() aio: report error from io_destroy() when threads race in io_destroy() fs/aio.c: Remove ctx parameter in kiocb_cancel
2014-06-14fix __swap_writepage() compile failure on old gcc versionsAl Viro
Tetsuo Handa wrote: "Commit 62a8067a7f35 ("bio_vec-backed iov_iter") introduced an unnamed union inside a struct which gcc-4.4.7 cannot handle. Name the unnamed union as u in order to fix build failure" Let's do this instead: there is only one place in the entire tree that steps into this breakage. Anon structs and unions work in older gcc versions; as the matter of fact, we have those in the tree - see e.g. struct ieee80211_tx_info in include/net/mac80211.h What doesn't work is handling their initializers: struct { int a; union { int b; char c; }; } x[2] = {{.a = 1, .c = 'a'}, {.a = 0, .b = 1}}; is the obvious syntax for initializer, perfectly fine for C11 and handled correctly by gcc-4.7 or later. Earlier versions, though, break on it - declaration is fine and so's access to fields (i.e. x[0].c = 'a'; would produce the right code), but members of the anon structs and unions are not inserted into the right namespace. Tellingly, those older versions will not barf on struct {int a; struct {int a;};}; - looks like they just have it hacked up somewhere around the handling of . and -> instead of doing the right thing. The easiest way to deal with that crap is to turn initialization of those fields (in the only place where we have such initializer of iov_iter) into plain assignment. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-14Merge tag 'hsi-for-3.16-fixes1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI build fixes from Sebastian Reichel: - tighten dependency between ssi-protocol and omap-ssi to fix build failures with randconfig. - use normal module refcounting in omap driver to fix build with disabled module support * tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: omap_ssi_port: use normal module refcounting HSI: fix omap ssi driver dependency
2014-06-14Merge tag 'gpio-v3.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "A first GPIO fix for the v3.16 series, this was serious since it blocks the OMAP boot. Sending you this vital fix before leaving for a short vacation so it does not sit collecting dust in my tree for no good reason. Apart from this, our v3.16 cycle looks like a good start" * tag 'gpio-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of: Fix handling for deferred probe for -gpio suffix
2014-06-14Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso fixes from Peter Anvin: "Fixes for x86/vdso. One is a simple build fix for bigendian hosts, one is to make "make vdso_install" work again, and the rest is about working around a bug in Google's Go language -- two are documentation patches that improves the sample code that the Go coders took, modified, and broke; the other two implements a workaround that keeps existing Go binaries from segfaulting at least" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso_install x86/vdso: Hack to keep 64-bit Go programs working x86/vdso: Add PUT_LE to store little-endian values x86/vdso/doc: Make vDSO examples more portable x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c x86, vdso: Remove one final use of htole16()
2014-06-14Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for Sensirion SHTC1 humidity / temperature sensor - convert ltc4151 and vexpress drivers to use devm functions - drop generic chip detection from lm85 driver - avoid forward declarations in atxp1 driver - fix sign extensions in ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: vexpress: Use devm helper for hwmon device registration hwmon: (atxp1) Avoid forward declaration hwmon: add support for Sensirion SHTC1 sensor hwmon: (ltc4151) Convert to devm_hwmon_device_register_with_groups hwmon: (lm85) Drop generic detection hwmon: (ina2xx) Cast to s16 on shunt and current regs
2014-06-13udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookupEric Dumazet
Its too easy to add thousand of UDP sockets on a particular bucket, and slow down an innocent multicast receiver. Early demux is supposed to be an optimization, we should avoid spending too much time in it. It is interesting to note __udp4_lib_demux_lookup() only tries to match first socket in the chain. 10 is the threshold we already have in __udp4_lib_lookup() to switch to secondary hash. Fixes: 421b3885bf6d5 ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Held <drheld@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-13vxlan: use dev->needed_headroom instead of dev->hard_header_lenCong Wang
When we mirror packets from a vxlan tunnel to other device, the mirror device should see the same packets (that is, without outer header). Because vxlan tunnel sets dev->hard_header_len, tcf_mirred() resets mac header back to outer mac, the mirror device actually sees packets with outer headers Vxlan tunnel should set dev->needed_headroom instead of dev->hard_header_len, like what other ip tunnels do. This fixes the above problem. Cc: "David S. Miller" <davem@davemloft.net> Cc: stephen hemminger <stephen@networkplumber.org> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-13MAINTAINERS: update cxgb4 maintainerDimitris Michailidis
Hari's been doing the patch submissions for a while now and he'll be taking over as maintainer. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-13x86/vdso: Fix vdso_installAndy Lutomirski
"make vdso_install" installs unstripped versions of the vdso objects for the benefit of the debugger. This was broken by checkin: 6f121e548f83 x86, vdso: Reimplement vdso.so preparation in build-time C The filenames are different now, so update the Makefile to cope. This still installs the 64-bit vdso as vdso64.so. We believe this will be okay, as the only known user is a patched gdb which is known to use build-ids, but if it turns out to be a problem we may have to add a link. Inspired by a patch from Sam Ravnborg. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/b10299edd8ba98d17e07dafcd895b8ecf4d99eff.1402586707.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-06-13NVMe: Fix START_STOP_UNIT Scsi->NVMe translation.Dan McLeran
This patch contains several fixes for Scsi START_STOP_UNIT. The previous code did not account for signed vs. unsigned arithmetic which resulted in an invalid lowest power state caculation when the device only supports 1 power state. The code for Power Condition == 2 (Idle) was not following the spec. The spec calls for setting the device to specific power states, depending upon Power Condition Modifier, without accounting for the number of power states supported by the device. The code for Power Condition == 3 (Standby) was using a hard-coded '0' which is replaced with the macro POWER_STATE_0. Signed-off-by: Dan McLeran <daniel.mcleran@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-06-13btrfs: fix error handling in create_pending_snapshotEric Sandeen
fcebe456 cut and pasted some code to a later point in create_pending_snapshot(), but didn't switch to the appropriate error handling for this stage of the function. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13btrfs: fix use of uninit "ret" in end_extent_writepage()Eric Sandeen
If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13btrfs: free ulist in qgroup_shared_accounting() error pathEric Sandeen
If tmp = ulist_alloc(GFP_NOFS) fails, we return without freeing the previously allocated qgroups = ulist_alloc(GFP_NOFS) and cause a memory leak. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13Btrfs: fix qgroups sanity test crash or hangFilipe Manana
Often when running the qgroups sanity test, a crash or a hang happened. This is because the extent buffer the test uses for the root node doesn't have an header level explicitly set, making it have a random level value. This is a problem when it's not zero for the btrfs_search_slot() calls the test ends up doing, resulting in crashes or hangs such as the following: [ 6454.127192] Btrfs loaded, debug=on, assert=on, integrity-checker=on (...) [ 6454.127760] BTRFS: selftest: Running qgroup tests [ 6454.127964] BTRFS: selftest: Running test_test_no_shared_qgroup [ 6454.127966] BTRFS: selftest: Qgroup basic add [ 6480.152005] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:5383] [ 6480.152005] Modules linked in: btrfs(+) xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc i2c_piix4 i2c_core pcspkr evbug psmouse serio_raw e1000 [last unloaded: btrfs] [ 6480.152005] irq event stamp: 188448 [ 6480.152005] hardirqs last enabled at (188447): [<ffffffff8168ef5c>] restore_args+0x0/0x30 [ 6480.152005] hardirqs last disabled at (188448): [<ffffffff81698e6a>] apic_timer_interrupt+0x6a/0x80 [ 6480.152005] softirqs last enabled at (188446): [<ffffffff810516cf>] __do_softirq+0x1cf/0x450 [ 6480.152005] softirqs last disabled at (188441): [<ffffffff81051c25>] irq_exit+0xb5/0xc0 [ 6480.152005] CPU: 0 PID: 5383 Comm: modprobe Not tainted 3.15.0-rc8-fdm-btrfs-next-33+ #4 [ 6480.152005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 6480.152005] task: ffff8802146125a0 ti: ffff8800d0d00000 task.ti: ffff8800d0d00000 [ 6480.152005] RIP: 0010:[<ffffffff81349a63>] [<ffffffff81349a63>] __write_lock_failed+0x13/0x20 [ 6480.152005] RSP: 0018:ffff8800d0d038e8 EFLAGS: 00000287 [ 6480.152005] RAX: 0000000000000000 RBX: ffffffff8168ef5c RCX: 000005deb8525852 [ 6480.152005] RDX: 0000000000000000 RSI: 0000000000001d45 RDI: ffff8802105000b8 [ 6480.152005] RBP: ffff8800d0d038e8 R08: fffffe12710f63db R09: ffffffffa03196fb [ 6480.152005] R10: ffff8802146125a0 R11: ffff880214612e28 R12: ffff8800d0d03858 [ 6480.152005] R13: 0000000000000000 R14: ffff8800d0d00000 R15: ffff8802146125a0 [ 6480.152005] FS: 00007f14ff804700(0000) GS:ffff880215e00000(0000) knlGS:0000000000000000 [ 6480.152005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6480.152005] CR2: 00007fff4df0dac8 CR3: 00000000d1796000 CR4: 00000000000006f0 [ 6480.152005] Stack: [ 6480.152005] ffff8800d0d03908 ffffffff810ae967 0000000000000001 ffff8802105000b8 [ 6480.152005] ffff8800d0d03938 ffffffff8168e57e ffffffffa0319c16 0000000000000007 [ 6480.152005] ffff880210500000 ffff880210500100 ffff8800d0d039b8 ffffffffa0319c16 [ 6480.152005] Call Trace: [ 6480.152005] [<ffffffff810ae967>] do_raw_write_lock+0x47/0xa0 [ 6480.152005] [<ffffffff8168e57e>] _raw_write_lock+0x5e/0x80 [ 6480.152005] [<ffffffffa0319c16>] ? btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa0319c16>] btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa02b2acb>] btrfs_lock_root_node+0x3b/0x50 [btrfs] [ 6480.152005] [<ffffffffa02b81a6>] btrfs_search_slot+0x916/0xa20 [btrfs] [ 6480.152005] [<ffffffff811a727f>] ? create_object+0x23f/0x300 [ 6480.152005] [<ffffffffa02b9958>] btrfs_insert_empty_items+0x78/0xd0 [btrfs] [ 6480.152005] [<ffffffffa036041a>] insert_normal_tree_ref.constprop.4+0xa2/0x19a [btrfs] [ 6480.152005] [<ffffffffa03605c3>] test_no_shared_qgroup+0xb1/0x1ca [btrfs] [ 6480.152005] [<ffffffff8108cad6>] ? local_clock+0x16/0x30 [ 6480.152005] [<ffffffffa035ef8e>] btrfs_test_qgroups+0x1ae/0x1d7 [btrfs] [ 6480.152005] [<ffffffffa03a69d2>] ? ftrace_define_fields_btrfs_space_reservation+0xfd/0xfd [btrfs] [ 6480.152005] [<ffffffffa03a6a86>] init_btrfs_fs+0xb4/0x153 [btrfs] [ 6480.152005] [<ffffffff81000352>] do_one_initcall+0x102/0x150 [ 6480.152005] [<ffffffff8103d223>] ? set_memory_nx+0x43/0x50 [ 6480.152005] [<ffffffff81682668>] ? set_section_ro_nx+0x6d/0x74 [ 6480.152005] [<ffffffff810d91cc>] load_module+0x1cdc/0x2630 (...) Therefore initialize the extent buffer as an empty leaf (level 0). Issue easy to reproduce when btrfs is built as a module via: $ for ((i = 1; i <= 1000000; i++)); do rmmod btrfs; modprobe btrfs; done Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13btrfs: prevent RCU warning when dereferencing radix tree slotSasha Levin
Mark the dereference as protected by lock. Not doing so triggers an RCU warning since the radix tree assumed that RCU is in use. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13Btrfs: fix unfinished readahead thread for raid5/6 degraded mountingWang Shilong
Steps to reproduce: # mkfs.btrfs -f /dev/sd[b-f] -m raid5 -d raid5 # mkfs.ext4 /dev/sdc --->corrupt one of btrfs device # mount /dev/sdb /mnt -o degraded # btrfs scrub start -BRd /mnt This is because readahead would skip missing device, this is not true for RAID5/6, because REQ_GET_READ_MIRRORS return 1 for RAID5/6 block mapping. If expected data locates in missing device, readahead thread would not call __readahead_hook() which makes event @rc->elems=0 wait forever. Fix this problem by checking return value of btrfs_map_block(),we can only skip missing device safely if there are several mirrors. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-13btrfs: new ioctl TREE_SEARCH_V2Gerhard Heift
This new ioctl call allows the user to supply a buffer of varying size in which a tree search can store its results. This is much more flexible if you want to receive items which are larger than the current fixed buffer of 3992 bytes or if you want to fetch more items at once. Items larger than this buffer are for example some of the type EXTENT_CSUM. Signed-off-by: Gerhard Heift <Gerhard@Heift.Name> Signed-off-by: Chris Mason <clm@fb.com> Acked-by: David Sterba <dsterba@suse.cz>
2014-06-13NVMe: Use Log Page constants in SCSI emulationMatthew Wilcox
The nvme-scsi file defined its own Log Page constant. Use the newly-defined one from the header file instead. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-06-13NVMe: Define Log Page constantsMatthew Wilcox
Taken from the 1.1a version of the spec Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-06-13NVMe: Fix hot cpu notification dead lockKeith Busch
There is a potential dead lock if a cpu event occurs during nvme probe since it registered with hot cpu notification. This fixes the race by having the module register with notification outside of probe rather than have each device register. The actual work is done in a scheduled work queue instead of in the notifier since assigning IO queues has the potential to block if the driver creates additional queues. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-06-13Merge tag 'sound-fix-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of changes are small and easy cleanup or fixes: - a few HD-audio Realtek codec fixes and quirks - Intel HDMI audio fixes for Broadwell and Haswell / ValleyView - FireWire sound stack cleanups - a couple of sequencer core fixes - compress ABI fix for 64bit - conversion to modern ktime*() API" * tag 'sound-fix-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - Add more entry for enable HP mute led ALSA: hda - Add quirk for external mic on Lifebook U904 ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk table ALSA: intel8x0: Use ktime and ktime_get() ALSA: core: Use ktime_get_ts() ALSA: hda - verify pin:converter connection on unsol event for HSW and VLV ALSA: compress: Cancel the optimization of compiler and fix the size of struct for all platform. ALSA: hda - Add quirk for ABit AA8XE Revert "ALSA: hda - mask buggy stream DMA0 for Broadwell display controller" ALSA: hda - using POS_FIX_LPIB on Broadwell HDMI Audio ALSA: hda/realtek - Add support of ALC667 codec ALSA: hda/realtek - Add more codec rename ALSA: hda/realtek - New vendor ID for ALC233 ALSA: hda - add two new pin tables ALSA: hda/realtek - Add support of ALC891 codec ALSA: seq: Continue broadcasting events to ports if one of them fails ALSA: bebob: Remove unused function prototype ALSA: fireworks: Remove meaningless mutex_destroy() ALSA: fireworks: Remove a constant over width to which it's applied ALSA: fireworks: Improve comments about Fireworks transaction ...
2014-06-13Merge tag 'dlm-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm fix from David Teigland: "This contains one small fix related to resending SCTP messages" * tag 'dlm-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: keep listening connection alive with sctp mode
2014-06-13Merge branch 'serge-next-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security Pull more security layer updates from Serge Hallyn: "A few more commits had previously failed to make it through security-next into linux-next but this week made it into linux-next. At least commit "ima: introduce ima_kernel_read()" was deemed critical by Mimi to make this merge window. This is a temporary tree just for this request. Mimi has pointed me to some previous threads about keeping maintainer trees at the previous release, which I'll certainly do for anything long-term, after talking with James" * 'serge-next-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security: ima: introduce ima_kernel_read() evm: prohibit userspace writing 'security.evm' HMAC value ima: check inode integrity cache in violation check ima: prevent unnecessary policy checking evm: provide option to protect additional SMACK xattrs evm: replace HMAC version with attribute mask ima: prevent new digsig xattr from being replaced
2014-06-13ALSA: hda/realtek - Add more entry for enable HP mute ledKailang Yang
More HP machine need mute led support. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13ALSA: hda - Add quirk for external mic on Lifebook U904David Henningsson
According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1328587 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk tableHui Wang
The fixup value for codec alc293 was set to ALC269_FIXUP_DELL1_MIC_NO_PRESENCE by a mistake, if we don't fix it, the Dock mic will be overwriten by the headset mic, this will make the Dock mic can't work. Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "This has a mix of bug fixes and cleanups. Alex's patch fixes a rare race in RBD. Ilya's patches fix an ENOENT check when a second rbd image is mapped and a couple memory leaks. Zheng fixes several issues with fragmented directories and multiple MDSs. Josh fixes a spin/sleep issue, and Josh and Guangliang's patches fix setting and unsetting RBD images read-only. Naturally there are several other cleanups mixed in for good measure" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits) rbd: only set disk to read-only once rbd: move calls that may sleep out of spin lock range rbd: add ioctl for rbd ceph: use truncate_pagecache() instead of truncate_inode_pages() ceph: include time stamp in every MDS request rbd: fix ida/idr memory leak rbd: use reference counts for image requests rbd: fix osd_request memory leak in __rbd_dev_header_watch_sync() rbd: make sure we have latest osdmap on 'rbd map' libceph: add ceph_monc_wait_osdmap() libceph: mon_get_version request infrastructure libceph: recognize poolop requests in debugfs ceph: refactor readpage_nounlock() to make the logic clearer mds: check cap ID when handling cap export message ceph: remember subtree root dirfrag's auth MDS ceph: introduce ceph_fill_fragtree() ceph: handle cap import atomically ceph: pre-allocate ceph_cap struct for ceph_add_cap() ceph: update inode fields according to issued caps rbd: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO ...
2014-06-12Merge branch 'topic/omap3isp' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull OMAP3 updates from Mauro Carvalho Chehab: "Some driver improvements on OMAP3. This series depend on some iommu patches already merged" * 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (26 commits) [media] omap3isp: Rename isp_buffer isp_addr field to dma [media] omap3isp: Move to videobuf2 [media] v4l: vb2: Add a function to discard all DONE buffers [media] omap3isp: Cancel all queued buffers when stopping the video stream [media] omap3isp: Move buffer irqlist to isp_buffer structure [media] omap3isp: Move queue irqlock to isp_video structure [media] omap3isp: Move queue mutex to isp_video structure [media] omap3isp: queue: Don't build scatterlist for kernel buffer [media] omap3isp: Use the ARM DMA IOMMU-aware operations [media] omap3isp: queue: Use sg_alloc_table_from_pages() [media] omap3isp: queue: Map PFNMAP buffers to device [media] omap3isp: queue: Fix the dma_map_sg() return value check [media] omap3isp: queue: Allocate kernel buffers with dma_alloc_coherent [media] omap3isp: queue: Inline the ispmmu_v(un)map functions [media] omap3isp: queue: Merge the prepare and sglist functions [media] omap3isp: queue: Use sg_table structure [media] omap3isp: queue: Move IOMMU handling code to the queue [media] omap3isp: video: Set the buffer bytesused field at completion time [media] omap3isp: ccdc: Use the DMA API for FPC [media] omap3isp: ccdc: Use the DMA API for LSC ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 04:37:13 +0000