summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-08Input: cap1106 - fix register definitionKlaus Goger
Use the correct register address for Calibration Active and Interrupt Enable. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add missing POINTER / DIRECT properties to a bunch of driversHans de Goede
I've not done a full audit of all mouse drivers, I noticed these ones were missing the POINTER property while working on the POINTING_STICK property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add INPUT_PROP_POINTING_STICK propertyHans de Goede
It is useful for userspace to know that there not dealing with a regular mouse but rather with a pointing stick (e.g. a trackpoint) so that userspace can e.g. automatically enable middle button scrollwheel emulation. It is impossible to tell the difference from the evdev info without resorting to putting a list of device / driver names in userspace, this is undesirable. Add a property which allows userspace to see if a device is a pointing stick, and set it on all the pointing stick drivers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: elantech - fix detection of touchpad on ASUS s301lHans de Goede
Adjust Elantech signature validation to account fo rnewer models of touchpads. Cc: stable@vger.kernel.org Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - add support for trackpoint found on some v3 modelsUlrik De Bie
Some elantech v3 touchpad equipped laptops also have a trackpoint, before this commit, these give sync errors. With this patch, the trackpoint is provided as another input device: 'Elantech PS/2 TrackPoint' The patch will also output messages that do not follow the expected pattern. In the mean time I've seen 2 unknown packets occasionally: 0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00 I don't know what those are for, but they can be safely ignored. Currently all packets that are not known to v3 touchpad and where packet[3] (the fourth byte) lowest nibble is 6 are now recognized as PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint. This has been verified to work on a laptop Lenovo L530 where the touchpad/trackpoint combined identify themselves as: psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02) psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - reset the device when elantech probe failsUlrik De Bie
elantech_init() calls elantech_set_absolute_mode which sets the driver in an absolute mode. When after this the elantech_init fails, it is best to turn the ps/2 mouse emulation mode back on by calling psmouse_reset() so that it can work as a regular mouse. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: ALPS - suppress message about 'Unknown touchpad'Dmitry Torokhov
When we fail to match data returned by E7 and EC reports we state that we found "Unknown ALPS touchpad" whereas it is most likely it is not ALPS touchpad at all. Change wording a bit and reduce the message to debug so that it does not litter users logs and confuse them. Reported-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-25Input: fix used slots detection breakageDmitry Torokhov
Commit f8ec894945e7d205ce62be59e55e72c4304e4739 allowed external callers use slot dropping logic, unfortunately it also broke external users of input_mt_is_used() as we stopped incrementing frame count unless input device was set up to automatically drop unused slots. Fixes: f8ec894945e7d ("Input: MT - make slot cleanup callable outside mt_sync_frame()") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=83081 Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-19Input: sparc - i8042-sparcio.h: fix unused kbd_res warningVincent Stehlé
kbd_res is used only when CONFIG_PCI is defined; condition its declaration as well. This fixes the following compilation warning: drivers/input/serio/i8042-sparcio.h:20:25: warning: ‘kbd_res’ defined but not used [-Wunused-variable] Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-19Input: atmel_mxt_ts - improve description of gpio-keymap propertyNick Dyer
The below patch improves the documentation for the gpio-property. Stephen Warren has a good example here: https://github.com/swarren/linux-tegra/commit/09789801 trackpad@4b { compatible = "atmel,maxtouch"; reg = <0x4b>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>; linux,gpio-keymap = <0 0 0 BTN_LEFT>; }; This maps BTN_LEFT to the 4th bit of the T19 message. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 3.17.
2014-08-13Input: edt-ft5x06 - remove superfluous assignmentMaks Naumov
Somehow we ended up with a duplicate line in edt_ft5x06_register_write() Signed-off-by: Maks Naumov <maksqwe1@ukr.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: xpad - add support for Xbox One controllersTed Mielczarek
Xbox One controllers require an initialization message to start sending data, so xpad_init_output becomes a required function. The Xbox One controller does not have LEDs like the Xbox 360 controller, so that functionality is not implemented. The format of messages controlling rumble is currently undocumented, so rumble support is not yet implemented. Note that Xbox One controller advertises three interfaces with the same interface class, subclass and protocol, so we have to also match against interface number. Signed-off-by: Ted Mielczarek <ted@mielczarek.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - fix a few issues reported by CoverityDmitry Torokhov
This should fix the following issues reported by Coverity: *** CID 1230625: Logically dead code (DEADCODE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize() *** CID 1230627: Missing break in switch (MISSING_BREAK) /drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table() *** CID 1230629: Out-of-bounds write (OVERRUN) /drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg() *** CID 1230632: Unused pointer value (UNUSED_VALUE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg() Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - split config update a bitDmitry Torokhov
Let's split config update code a bit so it is hopefully a bit easier to read. Also, the firmware update callback should be the entity releasing firmware blob, not lower layers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13Input: atmel_mxt_ts - simplify mxt_initialize a bitDmitry Torokhov
I think having control flow with 2 goto/labels/flags is quite hard to read, this version is a bit more readable IMO. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-12Input: joystick - use get_cycles on ARMv8Mark Brown
As with ARM the ARMv8 architecture provides a cycle counter which can be used to provide a high resolution time for the joystick driver and silence the build warning that results from not having a precise timer on ARMv8, making allmodconfig and allyesconfig quieter. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-12Input: wacom - fix compiler warning if !CONFIG_PMGeert Uytterhoeven
If CONFIG_PM is not set: drivers/hid/wacom_sys.c:1436: warning: ‘wacom_reset_resume’ defined but not used Protect the unused functions by #ifdef CONFIG_PM to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08Input: cap1106 - allow changing key mapping from userspaceDmitry Torokhov
Wire up support for EVIOC{G|S}KEYCODE to allow users change key mappings from userspace. Reviewed-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08Input: synaptics - use firmware data for Cr-48Henrik Rydberg
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job of tracking individual fingers. This tracking isn't perfect, but, experiments show that it works better than just passing "semi-mt" data to userspace, and making userspace try to deduce where the fingers are given a bounding box. This patch tries to report correct two-finger positions instead of the {(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48 chromebooks. Note that this device's firmware always reports the higher (smaller y) finger in the "sgm" packet, and the lower (larger y) finger in the "agm" packet. Thus, when a new finger arrives on the pad, the kernel driver uses input core's contact tracking facilities to match contacts with slots. Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih Wang <cywang@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: synaptics - properly initialize slots for semi-MTDmitry Torokhov
Semi-MT devices are pointers too, so let's tell that to input_mt_init_slots(), as well as let it set up the devices as semi-MT, instead of us doing it manually. Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: MT - make slot cleanup callable outside mt_sync_frame()Henrik Rydberg
Some semi-mt drivers use the slots in a manual way, but may still want to call parts of the frame synchronization logic. This patch makes input_mt_drop_unused callable from those drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AANick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: wacom - update the ABI doc according to latest changesBenjamin Tissoires
Now the devices show up under hid no matter the connection (for USB and Bluetooth, not serial nor i2c). The USB devices can now be easily found under /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n> The Bluetooth devices could also be found under this path since their inclusion (April 2010), so this patch fixes the non-precise "hidraw*" path for them. The ABI has been unified while setting the LEDs and OLEDs. So Bluetooth devices lost their own LED selector but use the USB sysfs attribute. For OLEDs, Bluetooth devices handle only 1-bit images instead of 4 for USB. The documentation has been updated to match this. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 3.17.
2014-08-06Merge branch 'wacom' into nextDmitry Torokhov
Merge large update to Wacom driver, converting it from USB to a HID driver and unifying wired and bluetooth support, from Benjamin Tissoires.
2014-08-06Input: wacom - only register once the MODULE_* macrosBenjamin Tissoires
Putting the various MODULE_* makes them appear several times in modinfo because wacom.h is used both in wacom_sys.c and wacom_wac.h. Having the macros near the module declaration makes them appear only once. Add also MODULE_VERSION(DRIVER_VERSION) to export the current version number. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: HID - remove hid-wacom Bluetooth driverBenjamin Tissoires
Bluetooth Wacom tablets are now handled by the regular wacom.ko driver. Remove the now useless hid-wacom driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - add copyright note and bump version to 2.0Benjamin Tissoires
Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - remove passing id for wacom_set_reportPrzemo Firszt
Every call of wacom_set_report was passing "id" as a separate parameter and buffer also passed the same information. We can use first u8 of the buffer instead of "id" Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - check for bluetooth protocol while setting OLEDsBenjamin Tissoires
Bluetooth Intuos 4 use 1-bit definition while the USB ones use a 4-bits definition. This changes the size of the raw image we receive, and thus the kernel will only accept 1-bit images for Bluetooth and 4-bits for USB. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - handle Intuos 4 BT in wacom.koBenjamin Tissoires
A good point of this change is that now, the Intuos4 bluetooth can handle the different tools (artpen, airbrush, mice), and we get a common interface between USB and BT for accessing the LEDs/OLEDs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - handle Graphire BT tablets in wacom.koBenjamin Tissoires
First, merge the Graphire BT tablet. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - prepare the driver to include BT devicesBenjamin Tissoires
Now that wacom is a hid driver, there is no point in having a separate driver for bluetooth devices. This patch prepares the common paths of Bluetooth devices in the common wacom driver. It also adds the sysfs file "speed" used by Bluetooth devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: hyperv-keyboard - register as a wakeup sourceDexuan Cui
With this patch, we can press a key to wake up the VM after the VM executes "echo freeze > /sys/power/state". Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: imx_keypad - remove ifdef round PM methodsFabio Estevam
We can annotate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: jornada720_ts - get rid of space indentation and use tabPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: jornada720_ts - switch to using managed resourcesPramod Gurav
This switches the driver to using managed resources to simplify error handling and to do away with remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: alps - Rushmore and v7 resolution supportHans de Goede
Add support for querying the physical size from the touchpad for Rushmore and v7 touchpads, and use that to tell userspace the device resolution. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - remove ifdef around power management methodsFabio Estevam
We can annonate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEPFabio Estevam
When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are seen: drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function] static int mcs5000_ts_suspend(struct device *dev) ^ drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function] static int mcs5000_ts_resume(struct device *dev) Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: ads7846 - release resources on failure for clean exitPramod Gurav
Input device must be released(input_free_device) when ads7846_probe_dt fails. This fixes the same by releasing resources on failure. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: wacom - add support for 0x12C ISDv4 sensorJason Gerecke
Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28ARM: dts: am437x-gp-evm: Update binding for touchscreen sizeRoger Quadros
Update the bindings for touchscreen size. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28ARM: dts: am43x-epos-evm: Update binding for touchscreen sizeRoger Quadros
Update the bindings for touchscreen size. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - add device tree supportRoger Quadros
Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDsRoger Quadros
Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - use Type-B Multi-Touch protocolRoger Quadros
Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add support for v7 devicesYunkang Tang
Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-12 15:23:57 +0000