| Age | Commit message (Collapse) | Author |
|---|
|
Percpu allocator now supports allocation mask. Add @gfp to
[flex_]proportions init functions so that !GFP_KERNEL allocation masks
can be used with them too.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
Percpu allocator now supports allocation mask. Add @gfp to
percpu_counter_init() so that !GFP_KERNEL allocation masks can be used
with percpu_counters too.
We could have left percpu_counter_init() alone and added
percpu_counter_init_gfp(); however, the number of users isn't that
high and introducing _gfp variants to all percpu data structures would
be quite ugly, so let's just do the conversion. This is the one with
the most users. Other percpu data structures are a lot easier to
convert.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
|
percpu_counter is scheduled to grow @gfp support to allow atomic
initialization. This patch makes percpu_counters_lock irq-safe so
that it can be safely used from atomic contexts.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The percpu allocator now supports atomic allocations by only
allocating from already populated areas but the mechanism to ensure
that there's adequate amount of populated areas was missing.
This patch expands pcpu_balance_work so that in addition to freeing
excess free chunks it also populates chunks to maintain an adequate
level of populated areas. pcpu_alloc() schedules pcpu_balance_work if
the amount of free populated areas is too low or after an atomic
allocation failure.
* PERPCU_DYNAMIC_RESERVE is increased by two pages to account for
PCPU_EMPTY_POP_PAGES_LOW.
* pcpu_async_enabled is added to gate both async jobs -
chunk->map_extend_work and pcpu_balance_work - so that we don't end
up scheduling them while the needed subsystems aren't up yet.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
pcpu_reclaim_work will also be used to populate chunks asynchronously.
Rename it to pcpu_balance_work in preparation. pcpu_reclaim() is
renamed to pcpu_balance_workfn() and some of its local variables are
renamed too.
This is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
pcpu_nr_empty_pop_pages counts the number of empty populated pages
across all chunks and chunk->nr_populated counts the number of
populated pages in a chunk. Both will be used to implement pre/async
population for atomic allocations.
pcpu_chunk_[de]populated() are added to update chunk->populated,
chunk->nr_populated and pcpu_nr_empty_pop_pages together. All
successful chunk [de]populations should be followed by the
corresponding pcpu_chunk_[de]populated() calls.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
An allocation attempt may require extending chunk->map array which
requires GFP_KERNEL context which isn't available for atomic
allocations. This patch ensures that chunk->map array usually keeps
some amount of available space by directly allocating buffer space
during GFP_KERNEL allocations and scheduling async extension during
atomic ones. This should make atomic allocation failures from map
space exhaustion rare.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Now that pcpu_alloc_area() can allocate only from populated areas,
it's easy to add atomic allocation support to [__]alloc_percpu().
Update pcpu_alloc() so that it accepts @gfp and skips all the blocking
operations and allocates only from the populated areas if @gfp doesn't
contain GFP_KERNEL. New interface functions [__]alloc_percpu_gfp()
are added.
While this means that atomic allocations are possible, this isn't
complete yet as there's no mechanism to ensure that certain amount of
populated areas is kept available and atomic allocations may keep
failing under certain conditions.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The next patch will conditionalize the population block in
pcpu_alloc() which will end up making a rather large indentation
change obfuscating the actual logic change. This patch puts the block
under "if (true)" so that the next patch can avoid indentation
changes. The defintions of the local variables which are used only in
the block are moved into the block.
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Update pcpu_alloc_area() so that it can skip unpopulated areas if the
new parameter @pop_only is true. This is implemented by a new
function, pcpu_fit_in_area(), which determines the amount of head
padding considering the alignment and populated state.
@pop_only is currently always false but this will be used to implement
atomic allocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
At first, the percpu allocator required a sleepable context for both
alloc and free paths and used pcpu_alloc_mutex to protect everything.
Later, pcpu_lock was introduced to protect the index data structure so
that the free path can be invoked from atomic contexts. The
conversion only updated what's necessary and left most of the
allocation path under pcpu_alloc_mutex.
The percpu allocator is planned to add support for atomic allocation
and this patch restructures locking so that the coverage of
pcpu_alloc_mutex is further reduced.
* pcpu_alloc() now grab pcpu_alloc_mutex only while creating a new
chunk and populating the allocated area. Everything else is now
protected soley by pcpu_lock.
After this change, multiple instances of pcpu_extend_area_map() may
race but the function already implements sufficient synchronization
using pcpu_lock.
This also allows multiple allocators to arrive at new chunk
creation. To avoid creating multiple empty chunks back-to-back, a
new chunk is created iff there is no other empty chunk after
grabbing pcpu_alloc_mutex.
* pcpu_lock is now held while modifying chunk->populated bitmap.
After this, all data structures are protected by pcpu_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
percpu-km instantiates the whole chunk on creation and doesn't make
use of chunk->populated bitmap and leaves it as zero. While this
currently doesn't cause any problem, the inconsistency makes it
difficult to build further logic on top of chunk->populated. This
patch makes percpu-km fill chunk->populated on creation so that the
bitmap is always consistent.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
|
|
Previously, pcpu_[de]populate_chunk() were called with the range which
may contain multiple target regions in it and
pcpu_[de]populate_chunk() iterated over the regions. This has the
benefit of batching up cache flushes for all the regions; however,
we're planning to add more bookkeeping logic around [de]population to
support atomic allocations and this delegation of iterations gets in
the way.
This patch moves the region iterations out of
pcpu_[de]populate_chunk() into its callers - pcpu_alloc() and
pcpu_reclaim() - so that we can later add logic to track more states
around them. This change may make cache and tlb flushes more frequent
but multi-region [de]populations are rare anyway and if this actually
becomes a problem, it's not difficult to factor out cache flushes as
separate callbacks which are directly invoked from percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
percpu-vm and percpu-km implement separate versions of
pcpu_[de]populate_chunk() and some part which is or should be common
are currently in the specific implementations. Make the following
changes.
* Allocate area clearing is moved from the pcpu_populate_chunk()
implementations to pcpu_alloc(). This makes percpu-km's version
noop.
* Quick exit tests in pcpu_[de]populate_chunk() of percpu-vm are moved
to their respective callers so that they are applied to percpu-km
too. This doesn't make any meaningful difference as both functions
are noop for percpu-km; however, this is more consistent and will
help implementing atomic allocation support.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
pcpu_get_pages() creates the temp pages array if not already allocated
and returns the pointer to it. As the function is called from both
[de]population paths and depopulation can only happen after at least
one successful population, the param doesn't make any difference - the
allocation will always happen on the population path anyway.
Remove @may_alloc from pcpu_get_pages(). Also, add an lockdep
assertion pcpu_alloc_mutex instead of vaguely stating that the
exclusion is the caller's responsibility.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
percpu-vm uses pcpu_get_pages_and_bitmap() to acquire temp pages array
and populated bitmap and uses the two during [de]population. The temp
bitmap is used only to build the new bitmap that is copied to
chunk->populated after the operation succeeds; however, the new bitmap
can be trivially set after success without using the temp bitmap.
This patch removes the temp populated bitmap usage from percpu-vm.c.
* pcpu_get_pages_and_bitmap() is renamed to pcpu_get_pages() and no
longer hands out the temp bitmap.
* @populated arugment is dropped from all the related functions.
@populated updates in pcpu_[un]map_pages() are dropped.
* Two loops in pcpu_map_pages() are merged.
* pcpu_[de]populated_chunk() modify chunk->populated bitmap directly
from @page_start and @page_end after success.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
|
|
Currently, only SMP system free the percpu allocation info.
Uniprocessor system should free it too. For example, one x86 UML
virtual machine with 256MB memory, UML kernel wastes one page memory.
Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
|
If pcpu_map_pages() fails midway, it unmaps the already mapped pages.
Currently, it doesn't flush tlb after the partial unmapping. This may
be okay in most cases as the established mapping hasn't been used at
that point but it can go wrong and when it goes wrong it'd be
extremely difficult to track down.
Flush tlb after the partial unmapping.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
|
When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to
free what has already been allocated. The invocation is across the
whole requested range and pcpu_free_pages() will try to free all
non-NULL pages; unfortunately, this is incorrect as
pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't
clear the pages array and thus the array may have entries from the
previous invocations making the partial failure path free incorrect
pages.
Fix it by open-coding the partial freeing of the already allocated
pages.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are a couple of regression fixes, cpuidle menu governor
optimizations, fixes for ACPI proccessor and battery drivers,
hibernation fix to avoid problems related to the e820 memory map,
fixes for a few cpufreq drivers and a new version of the suspend
profiling tool analyze_suspend.py.
Specifics:
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during the
subsequent restore from Chun-Yi Lee
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
Pargmann and Uwe Kleine-König
- Version 3.0 of the analyze_suspend.py suspend profiling tool from
Todd E Brandt"
* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Fix warning message in acpi_battery_get_state()
PM / tools: analyze_suspend.py: update to v3.0
cpufreq: arm_big_little: fix module license spec
cpufreq: speedstep-smi: fix decimal printf specifiers
ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
cpufreq: OPP: Avoid sleeping while atomic
cpufreq: cpu0: Do not print error message when deferring
cpufreq: integrator: Use set_cpus_allowed_ptr
PM / hibernate: avoid unsafe pages in e820 reserved regions
ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
cpuidle: menu: Lookup CPU runqueues less
cpuidle: menu: Call nr_iowait_cpu less times
cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
cpuidle: menu: Use shifts when calculating averages where possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas:
"Part two of the PCI changes for v3.17:
- Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
It's a mechanical change that removes uses of the
DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge
window to reduce conflicts, but it's possible you'll still see a few"
* tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
|
|
Pull Sparc fixes from David Miller:
"Hook up the memfd syscall, and properly claim all PCI resources
discovered when building the PCI device tree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Hook up memfd_create system call.
sparc64: Properly claim resources as each PCI bus is probed.
sparc64: Skip bogus PCI bridge ranges.
sparc64: Expand PCI bridge probing debug logging.
|
|
Pull networking fixes from David Miller:
"I'm sending this out, in particular, to get the iwlwifi fix
propagated:
1) Fix build due to missing include in i40e driver, from Lucas
Tanure.
2) Memory leak in openvswitch port allocation, from Chirstoph Jaeger.
3) Check DMA mapping errors in myri10ge, from Stanislaw Gruszka.
4) Fix various deadlock scenerios in sunvnet driver, from Sowmini
Varadhan.
5) Fix cxgb4i build failures with incompatible Kconfig settings of
the driver vs ipv6, from Anish Bhatt.
6) Fix generation of ACK packet timestamps in the presence of TSO
which will be split up, from Willem de Bruijn.
7) Don't enable sched scan in iwlwifi driver, it causes firmware
crashes in some revisions. From Emmanuel Grumbach.
8) Revert a macvlan simplification that causes crashes.
9) Handle RTT calculations properly in the presence of repair'd SKBs,
from Andrey Vagin.
10) SIT tunnel lookup uses wrong device index in compares, from
Shmulik Ladkani.
11) Handle MTU reductions in TCP properly for ipv4 mapped ipv6
sockets, from Neal Cardwell.
12) Add missing annotations in rhashtable code, from Thomas Graf.
13) Fix false interpretation of two RTOs as being from the same TCP
loss event in the FRTO code, from Neal Cardwell"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
netlink: Annotate RCU locking for seq_file walker
rhashtable: fix annotations for rht_for_each_entry_rcu()
rhashtable: unexport and make rht_obj() static
rhashtable: RCU annotations for next pointers
tcp: fix ssthresh and undo for consecutive short FRTO episodes
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic
tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()
sit: Fix ipip6_tunnel_lookup device matching criteria
net: ethernet: ibm: ehea: Remove duplicate object from Makefile
net: xgene: Check negative return value of xgene_enet_get_ring_size()
tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)
net: xilinx: Remove .owner field for driver
Revert "macvlan: simplify the structure port"
iwlwifi: mvm: disable scheduled scan to prevent firmware crash
xen-netback: remove loop waiting function
xen-netback: don't stop dealloc kthread too early
xen-netback: move NAPI add/remove calls
xen-netback: fix debugfs entry creation
xen-netback: fix debugfs write length check
net-timestamp: fix missing tcp fragmentation cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
pull request: wireless 2014-08-14
Please pull this batch of fixes intended for the 3.17 stream...
Arend van Spriel brings two brcmfmac fixes, one which fixes a memory
leak and one which corrects some merge damage.
Emmanuel Grumbach fixes Linus's iwlwifi firmware-related log spam.
Rickard Strandqvist does some proper NULL termination after a call
to strncpy.
Ronald Wahl corrects a carl9170 problem with sending URBs with the
wrong endpoint type (resulting in log spam).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Silences the following sparse warnings:
net/netlink/af_netlink.c:2926:21: warning: context imbalance in 'netlink_seq_start' - wrong count at exit
net/netlink/af_netlink.c:2972:13: warning: context imbalance in 'netlink_seq_stop' - unexpected unlock
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call rcu_deference_raw() directly from within rht_for_each_entry_rcu()
as list_for_each_entry_rcu() does.
Fixes the following sparse warnings:
net/netlink/af_netlink.c:2906:25: expected struct rhash_head const *__mptr
net/netlink/af_netlink.c:2906:25: got struct rhash_head [noderef] <asn:4>*<noident>
Fixes: e341694e3eb57fc ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to export rht_obj(), all inner to outer object translations
occur internally. It was intended to be used with rht_for_each() which
now primarily serves as the iterator for rhashtable_remove_pprev() to
effectively flush and free the full table.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Properly annotate next pointers as access is RCU protected in
the lookup path.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix TCP FRTO logic so that it always notices when snd_una advances,
indicating that any RTO after that point will be a new and distinct
loss episode.
Previously there was a very specific sequence that could cause FRTO to
fail to notice a new loss episode had started:
(1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue
(2) receiver ACKs packet 1
(3) FRTO sends 2 more packets
(4) RTO timer fires again (should start a new loss episode)
The problem was in step (3) above, where tcp_process_loss() returned
early (in the spot marked "Step 2.b"), so that it never got to the
logic to clear icsk_retransmits. Thus icsk_retransmits stayed
non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero
icsk_retransmits, decide that this RTO is not a new episode, and
decide not to cut ssthresh and remember the current cwnd and ssthresh
for undo.
There were two main consequences to the bug that we have
observed. First, ssthresh was not decreased in step (4). Second, when
there was a series of such FRTO (1-4) sequences that happened to be
followed by an FRTO undo, we would restore the cwnd and ssthresh from
before the entire series started (instead of the cwnd and ssthresh
from before the most recent RTO). This could result in cwnd and
ssthresh being restored to values much bigger than the proper values.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_tw_recycle heavily relies on tcp timestamps to build a per-host
ordering of incoming connections and teardowns without the need to
hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for
the last measured RTO. To do so, we keep the last seen timestamp in a
per-host indexed data structure and verify if the incoming timestamp
in a connection request is strictly greater than the saved one during
last connection teardown. Thus we can verify later on that no old data
packets will be accepted by the new connection.
During moving a socket to time-wait state we already verify if timestamps
where seen on a connection. Only if that was the case we let the
time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN
will be used. But we don't verify this on incoming SYN packets. If a
connection teardown was less than TCP_PAWS_MSL seconds in the past we
cannot guarantee to not accept data packets from an old connection if
no timestamps are present. We should drop this SYN packet. This patch
closes this loophole.
Please note, this patch does not make tcp_tw_recycle in any way more
usable but only adds another safety check:
Sporadic drops of SYN packets because of reordering in the network or
in the socket backlog queues can happen. Users behing NAT trying to
connect to a tcp_tw_recycle enabled server can get caught in blackholes
and their connection requests may regullary get dropped because hosts
behind an address translator don't have synchronized tcp timestamp clocks.
tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled.
In general, use of tcp_tw_recycle is disadvised.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure we use the correct address-family-specific function for
handling MTU reductions from within tcp_release_cb().
Previously AF_INET6 sockets were incorrectly always using the IPv6
code path when sometimes they were handling IPv4 traffic and thus had
an IPv4 dst.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Willem de Bruijn <willemb@google.com>
Fixes: 563d34d057862 ("tcp: dont drop MTU reduction indications")
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As of 4fddbf5d78 ("sit: strictly restrict incoming traffic to tunnel link device"),
when looking up a tunnel, tunnel's underlying interface (t->parms.link)
is verified to match incoming traffic's ingress device.
However the comparison was incorrectly based on skb->dev->iflink.
Instead, dev->ifindex should be used, which correctly represents the
interface from which the IP stack hands the ipip6 packets.
This allows setting up sit tunnels bound to vlan interfaces (otherwise
incoming ipip6 traffic on the vlan interface was dropped due to
ipip6_tunnel_lookup match failure).
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the Makefile, ehea_phyp.o is included twice in the list of
object files compile into ehea.o.
This change removes one instance.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xgene_enet_get_ring_size() returns a negative value in case of an error,
but its only caller in xgene_enet_create_desc_ring() currently uses the
return value directly as u32. Instead, check for a negative value first and
error out in case. Also move the call to xgene_enet_get_ring_size() before
devm_kzalloc() so we don't need to free anything in the error path.
This fixes the following issue reported by the Coverity Scanner:
** CID 1231336: Improper use of negative value (NEGATIVE_RETURNS)
/drivers/net/ethernet/apm/xgene/xgene_enet_main.c: 596 in xgene_enet_create_desc_ring()
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't know right timestamp for repaired skb-s. Wrong RTT estimations
isn't good, because some congestion modules heavily depends on it.
This patch adds the TCPCB_REPAIRED flag, which is included in
TCPCB_RETRANS.
Thanks to Eric for the advice how to fix this issue.
This patch fixes the warning:
[ 879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380()
[ 879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1
[ 879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 879.568177] 0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2
[ 879.568776] 0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80
[ 879.569386] ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc
[ 879.569982] Call Trace:
[ 879.570264] [<ffffffff817aa2d2>] dump_stack+0x4d/0x66
[ 879.570599] [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0
[ 879.570935] [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20
[ 879.571292] [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380
[ 879.571614] [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710
[ 879.571958] [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370
[ 879.572315] [<ffffffff81657459>] release_sock+0x89/0x1d0
[ 879.572642] [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860
[ 879.573000] [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80
[ 879.573352] [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40
[ 879.573678] [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20
[ 879.574031] [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0
[ 879.574393] [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b
[ 879.574730] ---[ end trace a17cbc38eb8c5c00 ]---
v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit,
where it's set for other skb-s.
Fixes: 431a91242d8d ("tcp: timestamp SYN+DATA messages")
Fixes: 740b0f1841f6 ("tcp: switch rtt estimations to usec resolution")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to init .owner field.
Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"
This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit a188a54d11629bef2169052297e61f3767ca8ce5.
It causes crashes
====================
[ 80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878
[ 80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
[ 80.691289] PGD 22c102067 PUD 235bf0067 PMD 0
[ 80.706611] Oops: 0002 [#1] SMP
[ 80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca
[ 80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1
[ 80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014
[ 80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000
[ 80.845770] RIP: 0010:[<ffffffff810832e4>] [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
[ 80.875326] RSP: 0018:ffff88022e847b28 EFLAGS: 00010046
[ 80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000
[ 80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db
[ 80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000
[ 80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70
[ 80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440
[ 81.012929] FS: 00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000
[ 81.040400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0
[ 81.083689] Stack:
[ 81.090739] ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000
[ 81.116253] ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1
[ 81.141766] ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000
[ 81.167282] Call Trace:
[ 81.175768] [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170
[ 81.195985] [<ffffffff8108494b>] cancel_work_sync+0xb/0x10
[ 81.214769] [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan]
[ 81.237844] [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan]
[ 81.259209] [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0
[ 81.281140] [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0
[ 81.302786] [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan]
[ 81.326439] [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70
[ 81.346366] [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20
[ 81.367439] [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70
[ 81.390228] [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20
[ 81.411587] [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0
[ 81.433518] [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110
[ 81.455735] [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30
[ 81.475094] [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe]
[ 81.495886] [<ffffffff813512a2>] pci_device_remove+0x32/0x60
[ 81.515246] [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0
[ 81.536321] [<ffffffff814c76f8>] driver_detach+0xc8/0xd0
[ 81.554530] [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0
[ 81.573888] [<ffffffff814c828b>] driver_unregister+0x2b/0x60
[ 81.593246] [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0
[ 81.613749] [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe]
[ 81.635401] [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0
[ 81.655334] [<ffffffff8187a395>] ? sysret_check+0x22/0x5d
[ 81.673833] [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0
[ 81.696339] [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 81.717985] [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b
[ 81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8
[ 81.807026] RIP [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
[ 81.828468] RSP <ffff88022e847b28>
[ 81.840384] CR2: 0000000000000878
[ 81.851731] ---[ end trace 9f6c7232e3464e11 ]---
====================
This bug could be triggered by these steps:
modprobe ixgbe ; modprobe macvlan
ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan
ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan
ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan
ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan
rmmod ixgbe
Reported-by: "Keller, Jacob E" <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
"This is the non-critical part of kbuild for 3.17-rc1:
- make help hint to use make -s with make kernelrelease et al.
- moved a kbuild document to Documentation/kbuild where it belongs
- four new Coccinelle scripts, one dropped and one fixed
- new make kselftest target to run various tests on the kernel"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: kselftest - new make target to build and run kernel selftests
Coccinelle: Script to replace if and BUG with BUG_ON
Coccinelle: Script to detect incorrect argument to sizeof
Coccinelle: Script to use ARRAY_SIZE instead of division of two sizeofs
Coccinelle: Script to detect cast after memory allocation
coccinelle/null: solve parse error
Documentation: headers_install.txt is part of kbuild
kbuild: make -s should be used with kernelrelease/kernelversion/image_name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
- make clean also considers $(extra-m) and $(extra-) to be consistent
- cleanup and fixes in scripts/Makefile.host
- allow to override the name of the Python 2 executable with make
PYTHON=... (only needed for ia64 in practice)
- option to split debugingo into *.dwo files to save disk space if the
compiler supports it (CONFIG_DEBUG_INFO_SPLIT)
- option to use dwarf4 debuginfo if the compiler supports it
(CONFIG_DEBUG_INFO_DWARF4)
- fix for disabling certain warnings with clang
- fix for unneeded rebuild with dash when a command contains
backslashes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix handling of backslashes in *.cmd files
kbuild, LLVMLinux: Supress warnings unless W=1-3
Kbuild: Add a option to enable dwarf4 v2
kbuild: Support split debug info v4
kbuild: allow to override Python command name
kbuild: clean-up and bug fix of scripts/Makefile.host
kbuild: clean up scripts/Makefile.host
kbuild: drop shared library support from Makefile.host
kbuild: fix a bug of C++ host program handling
kbuild: fix a typo in scripts/Makefile.host
scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband/rdma updates from Roland Dreier:
"Main set of InfiniBand/RDMA updates for 3.17 merge window:
- MR reregistration support
- MAD support for RMPP in userspace
- iSER and SRP initiator updates
- ocrdma hardware driver updates
- other fixes..."
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits)
IB/srp: Fix return value check in srp_init_module()
RDMA/ocrdma: report asic-id in query device
RDMA/ocrdma: Update sli data structure for endianness
RDMA/ocrdma: Obtain SL from device structure
RDMA/uapi: Include socket.h in rdma_user_cm.h
IB/srpt: Handle GID change events
IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0]
IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0]
RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf()
IPoIB: Remove unnecessary test for NULL before debugfs_remove()
IB/mad: Add user space RMPP support
IB/mad: add new ioctl to ABI to support new registration options
IB/mad: Add dev_notice messages for various umad/mad registration failures
IB/mad: Update module to [pr|dev]_* style print messages
IB/ipoib: Avoid multicast join attempts with invalid P_key
IB/umad: Update module to [pr|dev]_* style print messages
IB/ipoib: Avoid flushing the workqueue from worker context
IB/ipoib: Use P_Key change event instead of P_Key polling mechanism
IB/ipath: Add P_Key change event support
mlx4_core: Add support for secure-host and SMP firewall
...
|
|
Benjamin Herrenschmidt pointed out that I further missed modifying
update_vsyscall after the wall_to_mono value was changed to a
timespec64. This causes issues on powerpc32, which expects a 32bit
timespec.
This patch fixes the problem by properly converting from a timespec64 to
a timespec before passing the value on to the arch-specific vsyscall
logic.
[ Thomas is currently on vacation, but reviewed it and wanted me to send
this fix on to you directly. ]
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge leftovers from Andrew Morton:
"A few leftovers.
I have a bunch of OCFS2 patches which are still out for review and
which I might sneak along after -rc1. Partly my fault - I should send
my review pokes out earlier"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix CROSS_MEMORY_ATTACH help text grammar
drivers/mfd/rtsx_usb.c: export device table
mm, hugetlb_cgroup: align hugetlb cgroup limit to hugepage size
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The rtsx_usb driver contains the table for the devices it supports but
doesn't export it. As a result, no alias is generated and it doesn't
get loaded automatically.
Via https://bugzilla.novell.com/show_bug.cgi?id=890096
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reported-by: Marcel Witte <wittemar@googlemail.com>
Cc: Roger Tseng <rogerable@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memcg aligns memory.limit_in_bytes to PAGE_SIZE as part of the resource
counter since it makes no sense to allow a partial page to be charged.
As a result of the hugetlb cgroup using the resource counter, it is also
aligned to PAGE_SIZE but makes no sense unless aligned to the size of
the hugepage being limited.
Align hugetlb cgroup limit to hugepage size.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are firmwares which don't support scheduled scan.
Disable it for now.
Linus's system encoutered this issue.
Thanks to David Spinadel for his help.
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull more powerpc updates from Ben Herrenschmidt:
"Here are some more powerpc bits for 3.17, essentially fixes.
The biggest series, also aimed at -stable, is from Aneesh and is the
result of weeks and weeks of debugging to find out why the heck or THP
implementation was occasionally triggering multi-hit errors in our
level 1 TLB. It ended up being a combination of issues including
subtleties as to how we should invalidate those special 'MPSS' pages
we use to allow the use of 16M pages inside 4K/64K "base page size"
segments (you really have to love our MMU !)
Another interesting one in the "OMG" category is the series from
Michael adding memory barriers to spin_is_locked(). That's also the
result of many days of debugging to figure out why the semaphore code
would occasionally crash in ways that made no sense. It ended up
being some creative lock stacking that was defeated by the fact that
our locks allow a load inside the locked section to be re-ordered with
the load of the lock value itself (I'm still of two mind about whether
to kill that once and for all by putting a heavier barrier back into
our lock implementation...). The fixes come with a long explanation
in the cset comments, feel free to read it if you feel like having a
headache today"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
powerpc/thp: Add tracepoints to track hugepage invalidate
powerpc/mm: Use read barrier when creating real_pte
powerpc/thp: Use ACCESS_ONCE when loading pmdp
powerpc/thp: Invalidate with vpn in loop
powerpc/thp: Handle combo pages in invalidate
powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pte
powerpc/thp: Don't recompute vsid and ssize in loop on invalidate
powerpc/thp: Add write barrier after updating the valid bit
powerpc: reorder per-cpu NUMA information's initialization
powerpc/perf/hv-24x7: Use kmem_cache_free
powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_info
powerpc: Hard disable interrupts in xmon
powerpc: remove duplicate definition of TEXASR_FS
powerpc/pseries: Avoid deadlock on removing ddw
powerpc/pseries: Failure on removing device node
powerpc/boot: Use correct zlib types for comparison
powerpc/powernv: Interface to register/unregister opal dump region
printk: Add function to return log buffer address and size
powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYS
powerpc/ppc476: Disable BTAC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock
Pull hwspinlock updates from Ohad Ben-Cohen:
"Two small hwspinlock changes for better OMAP support, coming from
Suman Anna"
* tag 'hwspinlock-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
hwspinlock: enable OMAP build for AM33xx, AM43xx & DRA7xx
hwspinlock/omap: enable module before reading SYSSTATUS register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull seccomp fix from James Morris.
BUG(!spin_is_locked()) really doesn't work very well in UP
configurations without any actual spinlock state. Which is very much
why we have that "assert_spin_lock()" function for this.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp: Replace BUG(!spin_is_locked()) with assert_spin_lock
|
|
'mlx4', 'mlx5', 'ocrdma' and 'srp' into for-next
|
