summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-11rtc: rp5c01: add NVRAM supportGeert Uytterhoeven
The Ricoh RP5C01 RTC contains 26 x 4 bits of NVRAM. Provide access to it via a sysfs "nvram" attribute file. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/rtc: remove unneeded ifdef CONFIG_PMChristian Dietrich
Because CONFIG_PM is a precondition to CONFIG_ACPI, the ifdef CONFIG_PM within ifdef CONFIG_ACPI is redundant. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc-isl12022: properly handle military hour formatRoman Fietze
Mask out PM flag when reading the hour, always set MIL bit when writing the hour. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc: add support for DS3232 RTCRoy Zang
Add a driver for the DS3232 RTC chip via the I2C bus. Alarms are not supported in this version of the driver. [akpm@linux-foundation.org: fix Kconfig help text] Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Jingchang Lu <b22599@freescale.com> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/nuc900: fix build warningWan ZongShun
Remove unused local variable. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/nuc900: modify enable/disable IRQs and driver data setting locationWan ZongShun
This patch does two modifications: (1) Adjust enable/disable IRQs location,enable it after rtc registration and disable it prior to unregistration. (2) Put 'platform_set_drvdata(pdev, nuc900_rtc)' in front of rtc registration still be safety, though there is no need to do this, when I move enable irq after rtc registration, I think still put 'platform_set_drvdata' before rtc registration that would be a good habit. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/nuc900: make returning time checking function validWan ZongShun
Make returning time checking function valid. In spite of using the 'rtc_valid_tm', nevertheless, the read time function omits its returning value, that means the 'rtc_valid_tm' is useless here. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/m48t86: use rtc_valid_tm() to check returned tmWan ZongShun
Use rtc_valid_tm() to check the returned struct rtc_time *tm, to avoid returning a wrong tm value. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/m48t59: use rtc_valid_tm() to check returned tmWan ZongShun
Use rtc_valid_tm to check the returned struct rtc_time *tm, to avoid returning a wrong tm value. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/max6900: use rtc_valid_tm() to check returning tmWan ZongShun
Use rtc_valid_tm() to check returning tm for max6900, it can avoid returning wrong tm value. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/m41t80: use rtc_valid_tm() to check returned tmWan ZongShun
Use rtc_valid_tm() to check returned struct rtc_time *tm - it can avoid returning wrong tm value. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc: add Intersil ISL12022 RTC driverRoman Fietze
- derived from rtc-pcf8563 - no SRAM driver Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc: driver for the DryIce block found in i.MX25 chipsBaruch Siach
This driver is based on code from Freescale which accompanies their i.MX25 PDK board, with some cleanup. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/rtc/rtc-pl031.c: remove unused #include <linux/version.h>Huang Weiyi
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/pxa: remove unnecessary private ops->ioctl()Wan ZongShun
We shouldn't implement private ops->ioctl() unless absolutely necessary. pxa series RTC driver's ioctl() is unnecessary, since RTC subsystem has implement the ioctl() very well,so we can only use the API of '.alarm_irq_enable' and '.update_irq_enable' to do enable irq action. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc: fixes and new functionality for fm3130Sergey Matyukevich
- add sanity check for alarm data in fm3130_probe - fix fm3130_set_alarm. According to the datasheet, setting match bit '0' indicates that the corresponding alarm field will be used in the match process - add operation alarm_irq_enable operation which is responsible for handling RTC_AIE_ON, RTC_AIE_OFF ioctls - remove clearing of AF bit after reading rtc/alarm control register: according to datasheet this bit is cleared anyway when rtc/alarm control register is read [akpm@linux-foundation.org: make fm3130_alarm_irq_enable() static, fix comment layout] Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Sergey Lapin <slapin@ossfans.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/rtc-mxc: remove six unused fieldsWan ZongShun
Remove six unused fields from `struct rtc_plat_data'. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/m48t59: kfree(NULL) is OKWan ZongShun
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/pxa: remove unused fieldWan ZongShun
pxa_rtc.rtc_alarm is unused. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/rtc/rtc-pcf8563.c: remove unused structGraham Gower
Signed-off-by: Graham Gower <graham.gower@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11rtc/nuc900: fix checking of args during time-settingWan ZongShun
When a user application wants to set the rtc time, the RTC subsystem takes advantage of 'rtc_valid_tm(tm)' to check 'rtc_time *tm' value validity, it make sure the 'tm->tm_year' is larger than 70,so if '70< tm_year < 100', the '(settm->tm_year - 100)' will be negative. ' Setting the negative value to hardware register will be invalid, so I add the 'if' condition to make sure set a valid value to register. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11nuc900/rtc: change the waiting for device ready implementWan ZongShun
- add an mdelay(1) to the polling loop to cause less frequent access to the hardware register. - change the return value from ENODEV to EPERM if the loop timed out. I think the 'Operation not permitted' description is more suitable for the meaning of 'check_rtc_access_enable()' function, it just be used to judge rtc access operation is permitted or not. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11autofs4: remove unneeded null check in try_to_fill_dentry()Dan Carpenter
After 97e7449a7ad: "autofs4: fix indirect mount pending expire race" we no longer assumed that "ino" can be null. The other null checks got removed but this was one was missed. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11i2o: check return code from put_user()Kulikov Vasiliy
Check return value of put_user() and return -EFAULT if it failed. Original comment "We did a get user...so assuming mem is ok...is this bad?" is incorrect because memory can be read only. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11i2o: fix overflow of copy_to_user()Kulikov Vasiliy
If (len > reslen) we must not call copy_to_user() since kernel buffer is smaller than we want to copy. Similar code in this file is correct, so this bug was a typo. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/message/i2o/exec-osm.c: add missing mutex_unlockJulia Lawall
Add a mutex_unlock missing on the error path. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * mutex_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * mutex_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: add ricoh e822 pci idPablo Castillo
Signed-off-by: Pablo Castillo <CyberCastle@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Gregg Lebovitz <gregg@lebovitz.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dts: add ESDHC weird voltage bits workaroundRoy Zang
P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the host controller capabilities register wrongly set the bits. This patch adds the workaround to correct the weird voltage setting bits. Only 3.3V voltage is supported for P4080 ESDHC controller. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dts: add sdhci,auto-cmd12 field for p4080 device treeRoy Zang
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: add auto CMD12 support for eSDHC driverJerry Huang
Add auto CMD12 command support for eSDHC driver. This is needed by P4080 and P1022 for block read/write. Manual asynchronous CMD12 abort operation causes protocol violations on these silicons. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: add regulator supportMarek Szyprowski
This patch adds support for regulator API to sdhci core driver. Regulators can be used to disable power in suspended state to reduce dissipated energy. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-s3c: add support for new card detection methodsMarek Szyprowski
On some Samsung SoCs not all SDHCI controllers have card detect (CD) line. For some embedded designs it is not even needed, because ususally the device (like SDIO flash memory or wifi controller) is permanently wired to the controller. There are also systems which have a card detect line connected to some of the external interrupt lines or the presence of the card depends on some other actions (like enabling a power regulator). This patch adds support for all these cases. The following card detection methods are possible: 1. internal sdhci host card detect line 2. external event 3. external gpio interrupt 4. no card detect line, controller will poll for the card 5. no card detect line, card is permanently wired to the controller (once detected host won't poll it any more) By default, all existing code would use method #1, what is compatible with the previous version of the driver. In case of external event, two callbacks must be provided in platdata: ext_cd_init and ext_cd_cleanup. Both of them get a callback to a function that notifies the s3c-sdhci host contoller as their argument. That callback function should be called from the even dispatcher to let host notice the card insertion/removal. In case of external gpio interrupt, a gpio pin number must be provided in platdata (ext_cd_gpio parameter), as well as the information about the polarity of that gpio pin (ext_cd_gpio_invert). By default (ext_cd_gpio_invert == 0) gpio value 0 means 'card has been removed', but this can be changed to 'card has been removed' when ext_cd_gpio_invert == 1. This patch adds all required changes to sdhci-s3c driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-s3c: enable SDHCI_QUIRK_NO_HISPD_BIT quirkMarek Szyprowski
This patch enables SDHCI_QUIRK_NO_HISPD_BIT on Samsung SDHCI driver. This solves detection problems with some external SD cards. This change has been tested on S5PC100 and S5PC110. It has no inpact on driver speed. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-s3c: add support for the non standard minimal clock valueMarek Szyprowski
S3C SDHCI host controller can change the source for generating mmc clock. By default host bus clock is used, what causes some problems on machines with 133MHz bus, because the SDHCI divider cannot be as high get proper clock value for identification mode. This is not a problem for the controller, because it can generate lower frequencies from other clock sources. This patch changes sdhci driver to use get_min_clock() call if it has been provided. This fixes the flood of the following warnings on Samsung S5PV210 SoCs: mmc0: Minimum clock frequency too high for identification mode Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-s3c: add SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirkHyuk Lee
On Samsung's SDMMC hosts the timeout clock is derivied from the SD Clock which is set dynamically. So checked SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk and removed 'sdhci_s3c_get_timeout_clk' callback which doesn't need any more. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11omap hsmmc: fix processing of all dma interrupts as block completionVenkatraman S
If other informative interrupts are enabled for the DMA channel used by hsmmc, those are incorrectly treated as block completion. This patch lets only the block completion interrupt to be processed. Signed-off-by: Venkatraman S <svenkatr@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/mmc/host/msm-sdcc: remove dead config optionsChristian Dietrich
CONFIG_MMC_MSM7X00A_RESUME_IN_WQ and CONFIG_MMC_EMBEDDED_SDIO don't exist in Kconfig and is never defined anywhere else, therefore removing all references for it from the source code. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@codeaurora.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11omap: pandora: pass wl1251 information to SDIO coreGrazvydas Ignotas
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11omap_hsmmc: add init_card pass-through callbackGrazvydas Ignotas
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdio: allow non-standard SDIO cardsGrazvydas Ignotas
There are some chips (like TI WL12xx series) that can be interfaced over SDIO but don't support the SDIO specification, meaning that they are missing CIA (Common I/O Area) with all it's registers. Current Linux SDIO implementation relies on those registers to identify and configure the card, so non-standard cards can not function and cause lots of warnings from the core when it reads invalid data from non-existent registers. After this patch, init_card() host callback can now set new quirk MMC_QUIRK_NONSTD_SDIO, which means that SDIO core should not try to access any standard SDIO registers and rely on init_card() to fill all SDIO structures instead. As those cards are usually embedded chips, all the required information can be obtained from machine board files by the host driver when it's called through init_card() callback. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-pltfm: add support for CNS3xxx SoC devicesAnton Vorontsov
There's nothing special, just SoC-specific ops and quirks. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-pltfm: reorganize Makefile entries to support SoC devicesAnton Vorontsov
Due to build system limitations, intermediate and final objects can't have the same names. And as we're going to start building SoC-specific objects, let's rename the module to sdhci-platform, into which we'll link sdhci-pltfm and SoC-specifc objects. There should be no issue in renaming as the driver uses modalias mechanism. This is exactly the same approach as in sdhci-of driver. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-pltfm: switch to module device table matchingAnton Vorontsov
Sometimes want to place SoC-specific parts alongside with the generic driver, and to do so, we have to switch the driver over to the module device table matching. Note that drivers/mmc/host/sdhci-pltfm.h is so far empty, but it'll hold SoC-specific driver data handlers soon. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: omap: fix for bus width which improves SD card's peformance.Kishore Kadiyala
This patch improves low speeds for SD cards. OMAP-MMC controller's can support maximum bus width of '8'. when bus width is mentioned as "8" in controller data,the SD stack will check whether bus width is "4" and if not it will set bus width to "1" and there by degrading performance. This patch fixes the issue and improves the performance of SD cards. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: only set blockaddressed for > 2GiB cardsHanumath Prasad
A non-zero value of SEC_COUNT does not indicate that the card is sector addressed. According to the MMC specification, cards with a density greater than 2GiB are sector addressed. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: don't assign mmc->caps at SDHCI directlyKyungmin Park
Some host controllers can set mmc->caps before sdhci_add_host(). Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: 8-bit data transfer width supportKyungmin Park
Some host controllers such as s5pc110 support the WIDE8 feature. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: remove useless set_clock() checkKyungmin Park
When using QUIRK_NONSTANDARD_CLOCK, it checks the set_clock() function which is not used actually. So delete it. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: make sdhci work with ricoh mmc controllerMaxim Levitsky
The current way of disabling it is not well tested by vendor and has all kinds of bugs that show up on resume from ram/disk. A very good example is a dead SDHCI controller. Old way of disabling is still supported by continuing to use CONFIG_MMC_RICOH_MMC. Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html' Therefore most of the credit for this goes to Andrew de Quincey Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Philip Langdale <philipl@overt.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resumeMaxim Levitsky
If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 22:06:49 +0000