summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-25mtd: cfi: enforce valid geometry configurationArnd Bergmann
commit f5f92b36fbbb8ac7d70ff5fa39ec2637cce3094c upstream. MTD allows compile-time configuration of the possible CFI geometry settings that are allowed by the kernel, but that includes a couple of invalid configurations, where no bank width or no interleave setting is allowed. These are then caught with a compile-time warning: include/linux/mtd/cfi.h:76:2: warning: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. include/linux/mtd/map.h:145:2: warning: #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" This is a bit annoying for randconfig tests, and can be avoided if we change the Kconfig logic to always select the simplest configuration when no other one is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25mtd: sh_flctl: pass FIFO as physical addressArnd Bergmann
commit 1873315fb156cbc8e46f28e8b128f17ff6c31728 upstream. By convention, the FIFO address we pass using dmaengine_slave_config is a physical address in the form that is understood by the DMA engine, as a dma_addr_t, phys_addr_t or resource_size_t. The sh_flctl driver however passes a virtual __iomem address that gets cast to dma_addr_t in the slave driver. This happens to work on shmobile because that platform sets up an identity mapping for its MMIO regions, but such code is not portable to other platforms, and prevents us from ever changing the platform mapping or reusing the driver on other architectures like ARM64 that might not have the mapping. We also get a warning about a type mismatch for the case that dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set: drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma': drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl); This changes the driver to instead pass the physical address of the FIFO that is extracted from the MMIO resource, making the code more portable and avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25amd-xgbe: Fix unused suspend handlers build warningBorislav Petkov
commit 91eefaabf102c539e6f5531e9a1e5ed46d2b41ca upstream. Fix: drivers/net/ethernet/amd/xgbe/xgbe-main.c:835:12: warning: ‘xgbe_suspend’ defined but not used [-Wunused-function] drivers/net/ethernet/amd/xgbe/xgbe-main.c:855:12: warning: ‘xgbe_resume’ defined but not used [-Wunused-function] I see it during randconfig builds here. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25fbdev: auo_k190x: avoid unused function warningsArnd Bergmann
commit a8a31afad5ffa1c7de0cef1c4bc383b50f426bf8 upstream. The auo_k190x framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the auok190x_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: drivers/video/fbdev/auo_k190x.c:859:12: warning: 'auok190x_suspend' defined but not used drivers/video/fbdev/auo_k190x.c:899:12: warning: 'auok190x_resume' defined but not used This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25driver-core: use 'dev' argument in dev_dbg_ratelimited stubArnd Bergmann
commit 1f62ff34a90471d1b735bac2c79e894afc7c59bc upstream. dev_dbg_ratelimited() is a macro that ignores its first argument when DEBUG is not set, which can lead to unused variable warnings: ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cqe_sdq_handle': ethernet/mellanox/mlxsw/pci.c:646:18: warning: unused variable 'pdev' [-Wunused-variable] ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cqe_rdq_handle': ethernet/mellanox/mlxsw/pci.c:671:18: warning: unused variable 'pdev' [-Wunused-variable] The macro already ensures that all its other arguments are silently ignored by the compiler without triggering a warning, through the use of the no_printk() macro, but the dev argument is not passed into that. This changes the definition to use the same trick as no_printk() with an if(0) that leads the compiler to not evaluate the side-effects but still see that 'dev' might not be unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Andrew Lunn <andrew@lunn.ch> Fixes: 6f586e663e3b ("driver-core: Shut up dev_dbg_reatelimited() without DEBUG") Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25target/user: Fix cast from pointer to phys_addr_tArnd Bergmann
commit 0633e123465b61a12a262b742bebf2a9945f7964 upstream. The uio_mem structure has a member that is a phys_addr_t, but can be a number of other types too. The target core driver attempts to assign a pointer from vmalloc() to it, by casting it to phys_addr_t, but that causes a warning when phys_addr_t is longer than a pointer: drivers/target/target_core_user.c: In function 'tcmu_configure_device': drivers/target/target_core_user.c:906:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] This adds another cast to uintptr_t to shut up the warning. A nicer fix might be to have additional fields in uio_mem for the different purposes, so we can assign a pointer directly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25tty: hvc_xen: hide xen_console_remove when unusedArnd Bergmann
commit e36ae3439936e13c33f5841c7c2c1a9875acbb6d upstream. xencons_disconnect_backend() is only called from xen_console_remove(), which is conditionally compiled, so we get a harmless warning when CONFIG_HVC_XEN_FRONTEND is unset: hvc/hvc_xen.c:350:12: error: 'xen_console_remove' defined but not used [-Werror=unused-function] This moves the function down into the same #ifdef section to silence the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25usb: musb/ux500: remove duplicate check for dma_is_compatibleArnd Bergmann
commit 62a6abdd427b5fc4d8aad5dac874904e96273e6d upstream. When dma_addr_t is 64-bit, we get a warning about an invalid cast in the call to ux500_dma_is_compatible() from ux500_dma_channel_program(): drivers/usb/musb/ux500_dma.c: In function 'ux500_dma_channel_program': drivers/usb/musb/ux500_dma.c:210:51: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] if (!ux500_dma_is_compatible(channel, packet_sz, (void *)dma_addr, len)) The problem is that ux500_dma_is_compatible() is called from the main musb driver on the virtual address, but here we pass in a DMA address, so the types are fundamentally different but it works because the function only checks the alignment of the buffer and that is the same. We could work around this by adding another cast, but I have checked that the buffer we get passed here is already checked before it gets mapped, so the second check seems completely unnecessary and removing it must be the cleanest solution. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25pwc: hide unused labelArnd Bergmann
commit 1f6bcd011464cb36059e2562f72baf75f98b732d upstream. The pwc driver causes a warning when CONFIG_USB_PWC_INPUT_EVDEV is unset: drivers/media/usb/pwc/pwc-if.c: In function 'usb_pwc_probe': drivers/media/usb/pwc/pwc-if.c:1115:1: warning: label 'err_video_unreg' defined but not used [-Wunused-label] This moves the unused label and code inside another #ifdef to get rid of the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25SCSI: initio: remove duplicate module device tableArnd Bergmann
commit d282e2b383e3f41a7758e8cbf3076091ef9d9447 upstream. The initio driver has for many years had two copies of the same module device table. One of them is also used for registering the other driver, the other one is entirely useless after the large scale cleanup that Alan Cox did back in 2007. The compiler warns about this whenever the driver is built-in: drivers/scsi/initio.c:131:29: warning: 'i91u_pci_devices' defined but not used [-Wunused-variable] This removes the extraneous table and the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 72d39fea901 ("[SCSI] initio: Convert into a real Linux driver and update to modern style") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25scsi: mvumi: use __maybe_unused to hide pm functionsArnd Bergmann
commit fddbeb80a904aae41c84ed566e2b0d1de55907df upstream. The mvumi scsi hides the references to its suspend/resume functions in an #ifdef but does not hide the implementation the same way: drivers/scsi/mvumi.c:2632:12: error: 'mvumi_suspend' defined but not used [-Werror=unused-function] drivers/scsi/mvumi.c:2651:12: error: 'mvumi_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations so the compiler knows it can silently drop them instead of warning, while avoiding the addition of another #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25video: Use bool instead int pointer for get_opt_bool() argumentDaniel Wagner
commit 206fc20598157ce15597822cf01b94377e30075b upstream. As the function name already indicates that get_opt_bool() parses for a bool. It is not a surprise that compiler is complaining about it when -Werror=incompatible-pointer-types is used: drivers/video/fbdev/intelfb/intelfbdrv.c: In function ‘intelfb_setup’: drivers/video/fbdev/intelfb/intelfbdrv.c:353:39: error: passing argument 3 of ‘get_opt_bool’ from incompatible pointer type [-Werror=incompatible-pointer-types] if (get_opt_bool(this_opt, "accel", &accel)) Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25fbdev: sis: enforce selection of at least one backendArnd Bergmann
commit 5b833fea4377577eafecb888141a05470922ef25 upstream. The sis framebuffer driver complains with a compile-time warning if neither the FB_SIS_300 nor FB_SIS_315 symbols are selected: drivers/video/fbdev/sis/sis_main.c:61:2: warning: #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is se This is reasonable because it doesn't work in that case, but it's also annoying for randconfig builds and is one of the most common warnings I'm seeing on ARM now. This changes the Kconfig logic to prevent the silly configuration, by always selecting the FB_SIS_300 variant if the other one is not set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25staging: ste_rmi4: avoid unused function warningsArnd Bergmann
commit 9045a4a7e686a6316129d6d0b21b4fe2520968e4 upstream. The rmi4 touchscreen driver encloses the power-management functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: ste_rmi4/synaptics_i2c_rmi4.c:1050:12: warning: 'synaptics_rmi4_suspend' defined but not used ste_rmi4/synaptics_i2c_rmi4.c:1084:12: warning: 'synaptics_rmi4_resume' defined but not used This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25video: fbdev: sis: remove unused variableSudip Mukherjee
commit 32ad61951574d011d363694d6037592e99da9421 upstream. The variables modeflag and resinfo were only assigned some value but were never used. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25scsi: fdomain: drop fdomain_pci_tbl when built-inArnd Bergmann
commit 120f83f8d6f2e2e7dea3570646722c62ecee70b0 upstream. The fdomain SCSI host driver is one of the last remaining drivers that manually search the PCI bus using pci_get_device rather than registering a pci_driver instance. This means the module device table is unused when the driver is built-in, and we get a warning about it: drivers/scsi/fdomain.c:1773:29: warning: 'fdomain_pci_tbl' defined but not used [-Wunused-variable] To avoid the warning, this adds another #ifdef around the table definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25mptfusion: hide unused seq_mpt_print_ioc_summary functionArnd Bergmann
commit 28558f5af50d8335cbbc8bc2726e0747553e29f5 upstream. The seq_mpt_print_ioc_summary function is used for the /proc/mpt/iocN/summary implementation and never gets called when CONFIG_PROC_FS is disabled: drivers/message/fusion/mptbase.c:6851:13: warning: 'seq_mpt_print_ioc_summary' defined but not used [-Wunused-function] static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) This adds an #ifdef to hide the function definition in that case and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25mtd: maps: add __init attributeJulia Lawall
commit e4106a7c8236eb7b91686d36f3bf33ee43db94b4 upstream. Add __init attribute on functions that are only called from other __init functions and that are not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the functions are put in the .text.unlikely segment. Declaring them as __init will cause them to be put in the .init.text and to disappear after initialization. The result of objdump -x on the functions before the change is as follows: 00000000000001bc l F .text.unlikely 00000000000006a2 ck804xrom_init_one.isra.1 00000000000001aa l F .text.unlikely 0000000000000764 esb2rom_init_one.isra.1 00000000000001db l F .text.unlikely 0000000000000716 ichxrom_init_one.isra.1 And after the change it is as follows: 0000000000000000 l F .init.text 000000000000069d ck804xrom_init_one.isra.1 0000000000000000 l F .init.text 000000000000075f esb2rom_init_one.isra.1 0000000000000000 l F .init.text 0000000000000711 ichxrom_init_one.isra.1 Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Note that in each case, the function is stored in the probe field of a pci_driver structure, but this code is under an #if 0. The #if 0s have been unchanged since 2009 at the latest. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25mtd: ichxrom: maybe-uninitialized with gcc-4.9Arnd Bergmann
commit e70dda0868fad0f74c46df21f7f45fec24f29879 upstream. pci_read_config_word() might fail and not initialize its output, as pointed out by older versions of gcc when using the -Wmaybe-unintialized flag: drivers/mtd/maps/ichxrom.c: In function ‘ichxrom_cleanup’: drivers/mtd/maps/ichxrom.c:63:2: error: ‘word’ is used uninitialized in this function [-Werror=uninitialized] This is apparently a correct warning, though it does not show up with newer compilers. Changing the code to not attempt to write back uninitialized data into PCI config space is a correct fix for the problem and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25md: avoid warning for 32-bit sector_tArnd Bergmann
commit 3312c951efaba55080958974047414576b9e5d63 upstream. When CONFIG_LBDAF is not set, sector_t is only 32-bits wide, which means we cannot have devices with more than 2TB, and the code that is trying to handle compatibility support for large devices in md version 0.90 is meaningless but also causes a compile-time warning: drivers/md/md.c: In function 'super_90_load': drivers/md/md.c:1029:19: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/md/md.c: In function 'super_90_rdev_size_change': drivers/md/md.c:1323:17: warning: large integer implicitly truncated to unsigned type [-Woverflow] This adds a check for CONFIG_LBDAF to avoid even getting into this code path, and also adds an explicit cast to let the compiler know it doesn't have to warn about the truncation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25profile: hide unused functions when !CONFIG_PROC_FSArnd Bergmann
commit ade356b99a4187578609f2a91c4d2ed88e4e70dc upstream. A couple of functions and variables in the profile implementation are used only on SMP systems by the procfs code, but are unused if either procfs is disabled or in uniprocessor kernels. gcc prints a harmless warning about the unused symbols: kernel/profile.c:243:13: error: 'profile_flip_buffers' defined but not used [-Werror=unused-function] static void profile_flip_buffers(void) ^ kernel/profile.c:266:13: error: 'profile_discard_flip_buffers' defined but not used [-Werror=unused-function] static void profile_discard_flip_buffers(void) ^ kernel/profile.c:330:12: error: 'profile_cpu_callback' defined but not used [-Werror=unused-function] static int profile_cpu_callback(struct notifier_block *info, ^ This adds further #ifdef to the file, to annotate exactly in which cases they are used. I have done several thousand ARM randconfig kernels with this patch applied and no longer get any warnings in this file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Robin Holt <robinmholt@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25dpt_i2o: fix build warningSudip Mukherjee
commit f50abb9b63b1d8773e1ce32115701c06416e6f91 upstream. We were getting build warning about: drivers/scsi/dpt_i2o.c:183:29: warning: 'dptids' defined but not used dptids[] is only used in the MODULE_DEVICE_TABLE so when MODULE is not defined then dptids[] becomes unused. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25drivers/net: fix eisa_driver probe section mismatchFabian Frederick
commit cb4396edd84ed73081635fb933d19c1410fafaf4 upstream. Some eisa_driver structures used __init probe functions which generates a warning and could crash if function is called after being deleted. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25scsi: sim710: fix build warningSudip Mukherjee
commit 648a0a7da34f281410e8e3a59de8c13ec6ea380a upstream. We are getting build warning about: "Section mismatch in reference from the variable sim710_eisa_driver to the function .init.text:sim710_eisa_probe() The variable sim710_eisa_driver references the function __init sim710_eisa_probe()" sim710_eisa_probe() was having __init but that was being referenced from sim710_eisa_driver. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/boot: Avoid warning for zero-filling .bssArnd Bergmann
commit 553bbc11aa6c1f9e0f529a06aeeca15fbe4a3985 upstream. The latest binutils are warning about a .fill directive with an explicit value in a .bss section: arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned' arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned' This comes from the 'ENTRY()' macro padding the space between the symbols with 'nop' via: .align 4,0x90 Open-coding the .globl directive without the padding avoids that warning, as all the symbols are already page aligned. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25thermal: spear: use __maybe_unused for PM functionsArnd Bergmann
commit d612c64d1f4d6b2464993dfeafd9ec319f774188 upstream. The spear thermal driver hides its suspend/resume function conditionally based on CONFIG_PM, but references them based on CONFIG_PM_SLEEP, so we get a warning if the former is set but the latter is not: thermal/spear_thermal.c:58:12: warning: 'spear_thermal_suspend' defined but not used [-Wunused-function] thermal/spear_thermal.c:75:12: warning: 'spear_thermal_resume' defined but not used [-Wunused-function] This removes the #ifdef and instead uses a __maybe_uninitialized annotation to avoid the warning and improve compile-time coverage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25ssb: mark ssb_bus_register as __maybe_unusedArnd Bergmann
commit b7e2d195cc523bd92ed7a64aac089421dbab2a2d upstream. The SoC variant of the ssb code is now optional like the other ones, which means we can build the framwork without any front-end, but that results in a warning: drivers/ssb/main.c:616:12: warning: 'ssb_bus_register' defined but not used [-Wunused-function] This annotates the ssb_bus_register function as __maybe_unused to shut up the warning. A configuration like this will not work on any hardware of course, but we still want this to silently build without warnings if the configuration is allowed in the first place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 845da6e58e19 ("ssb: add Kconfig entry for compiling SoC related code") Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25reiserfs: avoid a -Wmaybe-uninitialized warningArnd Bergmann
commit ab4949640d6674b617b314ad3c2c00353304bab9 upstream. The latest gcc-7.0.1 snapshot warns about an unintialized variable use: In file included from fs/reiserfs/lbalance.c:8:0: fs/reiserfs/lbalance.c: In function 'leaf_item_bottle.isra.3': fs/reiserfs/reiserfs.h:1279:13: error: '*((void *)&n_ih+8).v' may be used uninitialized in this function [-Werror=maybe-uninitialized] v2->v = (v2->v & cpu_to_le64(15ULL << 60)) | cpu_to_le64(offset); ~~^~~ fs/reiserfs/reiserfs.h:1279:13: error: '*((void *)&n_ih+8).v' may be used uninitialized in this function [-Werror=maybe-uninitialized] v2->v = (v2->v & cpu_to_le64(15ULL << 60)) | cpu_to_le64(offset); This happens because the offset/type pair that is stored in ih.key.u.k_offset_v2 is actually uninitialized when we call set_le_ih_k_offset() and set_le_ih_k_type(). After we have called both, all data is correct, but the first of the two reads uninitialized data for the type field and writes it back before it gets overwritten. This works around the warning by initializing the k_offset_v2 through the slightly larger memcpy(). [JK: Remove now unused define and make it obvious we initialize the key] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25ALSA: hda/ca0132 - fix possible NULL pointer useArnd Bergmann
commit 46a049dae771b95e77ac6c823330f4a60f600236 upstream. gcc-7 caught what it considers a NULL pointer dereference: sound/pci/hda/patch_ca0132.c: In function 'dspio_scp.constprop': sound/pci/hda/patch_ca0132.c:1487:4: error: argument 1 null where non-null expected [-Werror=nonnull] This is plausible from looking at the function, as we compare 'reply' to NULL earlier in it. I have not tried to analyze if there are constraints that make it impossible to hit the bug, but adding another NULL check in the end kills the warning and makes the function more robust. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25arm64: Kconfig: select COMPAT_BINFMT_ELF only when BINFMT_ELF is setKefeng Wang
commit 2e449048a25eb75d48dff12882b93f26d130a1c6 upstream. Fix warning: "(COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF)" Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25scsi: advansys: fix uninitialized data accessArnd Bergmann
commit 44a5b977128c0ffff0654392b40f4c2ce72a619b upstream. gcc-7.0.1 now warns about a previously unnoticed access of uninitialized struct members: drivers/scsi/advansys.c: In function 'AscMsgOutSDTR': drivers/scsi/advansys.c:3860:26: error: '*((void *)&sdtr_buf+5)' may be used uninitialized in this function [-Werror=maybe-uninitialized] ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); ^ drivers/scsi/advansys.c:3860:26: error: '*((void *)&sdtr_buf+7)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/scsi/advansys.c:3860:26: error: '*((void *)&sdtr_buf+5)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/scsi/advansys.c:3860:26: error: '*((void *)&sdtr_buf+7)' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code has existed in this exact form at least since v2.6.12, and the warning seems correct. This uses named initializers to ensure we initialize all members of the structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUGArnd Bergmann
commit d689c64d189e43d782fec5649fb0afe303c5b3f9 upstream. The IOSF_MBI option requires PCI support, without it we get a harmless Kconfig warning when it gets selected by PUNIT_ATOM_DEBUG: warning: (X86_INTEL_LPSS && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds another dependency to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-8-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86: add MULTIUSER dependency for KVMArnd Bergmann
commit c2ce3f5d89d57301e2756ac325fe2ebc33bfec30 upstream. KVM tries to select 'TASKSTATS', which had additional dependencies: warning: (KVM) selects TASKSTATS which has unmet direct dependencies (NET && MULTIUSER) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25thermal: fix INTEL_SOC_DTS_IOSF_CORE dependenciesArnd Bergmann
commit 68fd77cf8a4b045594231f07e5fc92e1a34c0a9e upstream. We get a Kconfig warning when selecting this without also enabling CONFIG_PCI: warning: (X86_INTEL_LPSS && INTEL_SOC_DTS_IOSF_CORE && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds a new depedency. Fixes: 3a2419f865a6 ("Thermal: Intel SoC: DTS thermal use common APIs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/build: Silence the build with "make -s"Arnd Bergmann
commit d460131dd50599e0e9405d5f4ae02c27d529a44a upstream. Every kernel build on x86 will result in some output: Setup is 13084 bytes (padded to 13312 bytes). System is 4833 kB CRC 6d35fa35 Kernel: arch/x86/boot/bzImage is ready (#2) This shuts it up, so that 'make -s' is truely silent as long as everything works. Building without '-s' should produce unchanged output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-6-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25tools build: Add tools tree support for 'make -s'Josh Poimboeuf
commit e572d0887137acfc53f18175522964ec19d88175 upstream. When doing a kernel build with 'make -s', everything is silenced except the objtool build. That's because the tools tree support for silent builds is some combination of missing and broken. Three changes are needed to fix it: - Makefile: propagate '-s' to the sub-make's MAKEFLAGS variable so the tools Makefiles can see it. - tools/scripts/Makefile.include: fix the tools Makefiles' ability to recognize '-s'. The MAKE_VERSION and MAKEFLAGS checks are copied from the top-level Makefile. This silences the "DESCEND objtool" message. - tools/build/Makefile.build: add support to the tools Build files for recognizing '-s'. Again the MAKE_VERSION and MAKEFLAGS checks are copied from the top-level Makefile. This silences all the object compile/link messages. Reported-and-Tested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/e8967562ef640c3ae9a76da4ae0f4e47df737c34.1484799200.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/fpu/math-emu: Fix possible uninitialized variable useArnd Bergmann
commit 75e2f0a6b16141cb347f442033ec907380d4d66e upstream. When building the kernel with "make EXTRA_CFLAGS=...", this overrides the "PARANOID" preprocessor macro defined in arch/x86/math-emu/Makefile, and we run into a build warning: arch/x86/math-emu/reg_compare.c: In function ‘compare_i_st_st’: arch/x86/math-emu/reg_compare.c:254:6: error: ‘f’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This fixes the implementation to work correctly even without the PARANOID flag, and also fixes the Makefile to not use the EXTRA_CFLAGS variable but instead use the ccflags-y variable in the Makefile that is meant for this purpose. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bill Metzenthen <billm@melbpc.org.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-3-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25arm64: define BUG() instruction without CONFIG_BUGArnd Bergmann
commit f13d52cb3fad03c237572be2ee691e1fe2d1d7bb upstream. This mirrors commit e9c38ceba8d9 ("ARM: 8455/1: define __BUG as asm(BUG_INSTR) without CONFIG_BUG") to make the behavior of arm64 consistent with arm and x86, and avoids lots of warnings in randconfig builds, such as: kernel/seccomp.c: In function '__seccomp_filter': kernel/seccomp.c:666:1: error: no return statement in function returning non-void [-Werror=return-type] Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/ras/inject: Make it depend on X86_LOCAL_APIC=yBorislav Petkov
commit d4b2ac63b0eae461fc10c9791084be24724ef57a upstream. ... and get rid of the annoying: arch/x86/kernel/cpu/mcheck/mce-inject.c:97:13: warning: ‘mce_irq_ipi’ defined but not used [-Wunused-function] when doing randconfig builds. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170123183514.13356-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25scsi: advansys: fix build warning for PCI=nArnd Bergmann
commit f46e7cd36b5f2ce2bfb567e278a10ca717f85b84 upstream. The advansys probe function tries to handle both ISA and PCI cases, each hidden in an #ifdef when unused. This leads to a warning indicating that when PCI is disabled we could be using uninitialized data: drivers/scsi/advansys.c: In function advansys_board_found : drivers/scsi/advansys.c:11036:5: error: ret may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/scsi/advansys.c:10928:28: note: ret was declared here drivers/scsi/advansys.c:11309:8: error: share_irq may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/scsi/advansys.c:10928:6: note: share_irq was declared here This cannot happen in practice because the hardware in question only exists for PCI, but changing the code to just error out here is better for consistency and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25video: fbdev: via: remove possibly unused variablesArnd Bergmann
commit 484c7bbf2649831714da3a0fa30213977458e9b5 upstream. When CONFIG_PROC_FS is disabled, we get warnings about unused variables as remove_proc_entry() evaluates to an empty macro. drivers/video/fbdev/via/viafbdev.c: In function 'viafb_remove_proc': drivers/video/fbdev/via/viafbdev.c:1635:4: error: unused variable 'iga2_entry' [-Werror=unused-variable] drivers/video/fbdev/via/viafbdev.c:1634:4: error: unused variable 'iga1_entry' [-Werror=unused-variable] These are easy to avoid by using the pointer from the structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25platform/x86: intel_mid_thermal: Fix suspend handlers unused warningBorislav Petkov
commit b4aca383f9afb5f84b05de272656e6d4a919d995 upstream. Fix: drivers/platform/x86/intel_mid_thermal.c:424:12: warning: ‘mid_thermal_resume’ defined but not used [-Wunused-function] static int mid_thermal_resume(struct device *dev) ^ drivers/platform/x86/intel_mid_thermal.c:436:12: warning: ‘mid_thermal_suspend’ defined but not used [-Wunused-function] static int mid_thermal_suspend(struct device *dev) ^ which I see during randbuilds here. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Darren Hart <dvhart@infradead.org> Cc: platform-driver-x86@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25gpio: intel-mid: Fix build warning when !CONFIG_PMAugusto Mecking Caringi
commit fbc2a294f29e726787a0f5238b27137904f26b81 upstream. The only usage of function intel_gpio_runtime_idle() is here (in the same file): static const struct dev_pm_ops intel_gpio_pm_ops = { SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle) }; And when CONFIG_PM is not set, the macro SET_RUNTIME_PM_OPS expands to nothing, causing the following compiler warning: drivers/gpio/gpio-intel-mid.c:324:12: warning: ‘intel_gpio_runtime_idle’ defined but not used [-Wunused-function] static int intel_gpio_runtime_idle(struct device *dev) Fix it by annotating the function with __maybe_unused. Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25vmxnet3: prevent building with 64K pagesArnd Bergmann
commit fbdf0e28d061708cf18ba0f8e0db5360dc9a15b9 upstream. I got a warning about broken code on ARM64 with 64K pages: drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_rq_init': drivers/net/vmxnet3/vmxnet3_drv.c:1679:29: error: large integer implicitly truncated to unsigned type [-Werror=overflow] rq->buf_info[0][i].len = PAGE_SIZE; 'len' here is a 16-bit integer, so this clearly won't work. I don't think this driver is used much on anything other than x86, so there is no need to fix this properly and we can work around it with a Kconfig dependency to forbid known-broken configurations. qemu in theory supports it on other architectures too, but presumably only for compatibility with x86 guests that also run on vmware. CONFIG_PAGE_SIZE_64KB is used on hexagon, mips, sh and tile, the other symbols are architecture-specific names for the same thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25isdn: icn: remove a #warningArnd Bergmann
commit 01ed1e1504ac83a8b0b365c9f55d3427babbd7d9 upstream. The icn driver currently produces an unconditional #warning whenever we build it, introduced by Karsten Keil back in 2003: #warning TODO test headroom or use skb->nb to flag ACK Karsten's original commit (from BitKeeper) contains this description: - here are lot of bugs left, so ISDN is not stable yet but I think it's really time to fix it, even if it need some cycles to get it right (normally I'm only send patches if it works 100% for me). - I add some additional #warnings to address places which need fixing (I hope that some of the other ISDN developer jump in) Apparently this has not happened, and it is unlikely that it ever will, given that the driver doesn't seem to work. No substantial bug fixes other than janitorial cleanups have happened in the driver since then, and I see no indication that anyone who patched it had the hardware. We should probably either remove the driver, or remove all of i4l, but for now, this shuts up the distracting #warning by turning it into a comment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: http://git.meleeweb.net/linux.git/commit/?id=b0deac0886b0056765afd149e9834373b38e096b Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25virtio_balloon: prevent uninitialized variable useArnd Bergmann
commit f0bb2d50dfcc519f06f901aac88502be6ff1df2c upstream. The latest gcc-7.0.1 snapshot reports a new warning: virtio/virtio_balloon.c: In function 'update_balloon_stats': virtio/virtio_balloon.c:258:26: error: 'events[2]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:260:26: error: 'events[3]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:261:56: error: 'events[18]' is used uninitialized in this function [-Werror=uninitialized] virtio/virtio_balloon.c:262:56: error: 'events[17]' is used uninitialized in this function [-Werror=uninitialized] This seems absolutely right, so we should add an extra check to prevent copying uninitialized stack data into the statistics. >From all I can tell, this has been broken since the statistics code was originally added in 2.6.34. Fixes: 9564e138b1f6 ("virtio: Add memory statistics reporting to the balloon driver (V4)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25hippi: Fix a Fix a possible sleep-in-atomic bug in rr_closeJia-Ju Bai
[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ] The driver may sleep under a spinlock. The function call path is: rr_close (acquire the spinlock) free_irq --> may sleep To fix it, free_irq is moved to the place without holding the spinlock. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25xen: XEN_ACPI_PROCESSOR is Dom0-onlyJan Beulich
[ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ] Add a respective dependency. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25x86/mm/kmmio: Fix mmiotrace for page unaligned addressesKarol Herbst
[ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ] If something calls ioremap() with an address not aligned to PAGE_SIZE, the returned address might be not aligned as well. This led to a probe registered on exactly the returned address, but the entire page was armed for mmiotracing. On calling iounmap() the address passed to unregister_kmmio_probe() was PAGE_SIZE aligned by the caller leading to a complete freeze of the machine. We should always page align addresses while (un)registerung mappings, because the mmiotracer works on top of pages, not mappings. We still keep track of the probes based on their real addresses and lengths though, because the mmiotrace still needs to know what are mapped memory regions. Also move the call to mmiotrace_iounmap() prior page aligning the address, so that all probes are unregistered properly, otherwise the kernel ends up failing memory allocations randomly after disabling the mmiotracer. Tested-by: Lyude <lyude@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Acked-by: Pekka Paalanen <ppaalanen@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: nouveau@lists.freedesktop.org Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25mm/early_ioremap: Fix boot hang with earlyprintk=efi,keepDave Young
[ Upstream commit 7f6f60a1ba52538c16f26930bfbcfe193d9d746a ] earlyprintk=efi,keep does not work any more with a warning in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING): Boot just hangs because of the earlyprintk within the earlyprintk implementation code itself. This is caused by a new introduced middle state in: 69a78ff226fe ("init: Introduce SYSTEM_SCHEDULING state") early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING states, original condition should be updated accordingly. Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bp@suse.de Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-14 08:28:13 +0000