summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-07i40e: Additional checks for CEE APP priority validityNeerav Parikh
The firmware has added additional status information to allow software to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in CEE DCBX mode. This patch adds to support those additional checks and will only add applications to the software table that have oper and sync bits set without any error. Change-ID: I0a76c52427dadf97d4dba4538a3068d05e4eb56b Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: Add a stat to keep track of linearization countAnjali Singhai Jain
Keep track of how many times we ask the stack to linearize the skb because the HW cannot handle skbs with more than 8 frags per segment/single packet. Change-ID: If455452060963a769bbe6112cba952e79e944b52 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: fix unicast mac address addShannon Nelson
When using something like "ip maddr add ..." to add another unicast mac address to the netdev, the mac address comes into the set_rx_mode handler in the multicast list whether it is a unicast or multicast address. This was confusing the code when it was trying to search for addresses that needed to be deleted from the VSI, because it was looking for the VSI unicast address in the netdev unicast list. The result was that a new unicast address would get added to the VSI list and then immediately removed, and would never actually make it down into the hardware. This patch removes the separation from unicast and multicast in the search for filters to be deleted. It also simplifies the logic a little with a jump to the bottom of the loop when an address is found. Now it doesn't matter which netdev list the address is hiding in, we'll check them all. Change-ID: Ie3685a92427ae7d2212bf948919ce295bc7a874c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: fix bug in return from get_link_status and avoid spurious link messagesJesse Brandeburg
Previously, the driver could call this function and have only true/false returned, but false could mean multiple things like failure to read or link was down. This change allows the caller to get all return values in the call chain bubbled back to the source, which keeps information about failures from being lost. Also, in some unlikely scenarios, the firmware can become slow to respond to admin queue (AQ) queries for link state. Should the AQ time out, the driver can detect the state and avoid a link change when there may have been none. Change-ID: Ib2ac38407b7880750fb891b392fa77457fe6c21c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: add little endian conversion for checksumJesse Brandeburg
The checksum is not correct on big endian machines so add code to swap it correctly. Change-ID: Ic92b886d172a2cbe49f5d7eee1bc78e447023c7b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: give up the __func__Shannon Nelson
During early development, we added the function name to all of the error strings to make debugging simpler. Now that we've released the driver, our users should have more comprehensible error messages. So tear the roof off and give up the __func__. Ow. Change-ID: I7e1766252c7a032b9af6520da6aff536bdfd533c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Never let speed get set to 0 in get_settingsCatherine Sullivan
In ethtool, there is a possibility of speed getting set to 0 if advertise is set to 0 (which it is when autoneg is disabled). We never want this to happen as the firmware will actually attempt to set the speed to 0 sending link down, so add an extra check to make sure this doesn't happen. Change-ID: I62e0eeee2cbf043d8e6f5c9c9f0b92794e877f01 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Fix for truncated interrupt nameCarolyn Wyborny
This patch extends the size of the text available for the interrupt names. Without this patch, all the descriptive data available for the Flow Director interrupts is truncated. Change-ID: I2ac458f23ac3b4ea8f1edf73edc283b1d3704c7f Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: assure clean asq status reportShannon Nelson
There was a possibility where the asq_last_status could get through without update and thus report a previous error. I don't think we've actually seen this happen, but this patch will help make sure it doesn't. Change-ID: I9e33927052a5ee6ea21f80b66d4c4b76c2760b17 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Christopher Pau <christopher.pau@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: make i40e_init_pf_fcoe to voidShannon Nelson
i40e_init_pf_fcoe() didn't return anything except 0, it prints enough error info already, and no driver logic depends on the return value, so this can be void. Change-ID: Ie6afad849857d87a7064c42c3cce14c74c2f29d8 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: fix bad CEE status shift valueShannon Nelson
Fix a shift value that was wrong, ending up with a bad bitmask. Also add a blank line between two sets of #defines for better readability. Change-ID: I3e41fa2a2ab904d3a4e6cbf13972ab0036a10601 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: fix a potential type compare issueShannon Nelson
Rework an if expression to assure there is no type compare problem between a size and a possible negative number. Change-ID: I4921fcc96abfcf69490efce020a9e4007f251c99 Reported-by: Helin Zhang <helin.zhang@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: add driver support for new device idsShannon Nelson
Early addition of new a device id. Change-ID: I61a8c8556fdf4f5714be4e4089689e374f30293c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: stop VF ringsMitch Williams
Explicitly stop the rings belonging to each VF when disabling SR-IOV. Even though the VFs were gone, and the associated VSIs were removed, the rings were not stopped, and in some circumstances the hardware would continue to access the memory formerly used by the rings, causing memory corruption or DMAR errors, both of which would lead to general malaise of the kernel. To relieve this condition, explicitly stop all the rings associated with each VF before releasing its resources. Change-ID: I78c05d562c66e7b594b7e48d67860f49b3e5b6ec Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: enable WoL operation if config bit show WoL capableShannon Nelson
The driver was disabling Wake-on-LAN by default and waiting for the user to expressly turn it on. This patch has the driver turning on WoL from the start if enabled in the hardware config, which matches the behavior of our other drivers. Change-ID: I43faedb907f8ba4d1a61b72a7c86072b97af12b1 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Increase the amount of time we wait for reset to be donePaul M Stillwell Jr
In some rare cases the reset can take longer to complete so increase the amount of time we wait. Change-ID: Ib5628ec54b526a811ee33d1214fe763226406671 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07tcp: ensure prior synack rtx behavior with small backlogsEric Dumazet
Some applications use a listen() backlog of 1. Prior kernels were silently enforcing a qlen_log of 4, so that we were sending up to /proc/sys/net/ipv4/tcp_synack_retries SYNACK messages. Fixes: ef547f2ac16b ("tcp: remove max_qlen_log") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: ipv4: tcp.c Fixed an assignment coding style issueYuvaraja Mariappan
Fixed an assignment coding style issue Signed-off-by: Yuvaraja Mariappan <ymariappan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 's390-net'David S. Miller
Ursula Braun says: ==================== s390: qeth patches for net-next here are some s390 related patches for net-next. The qeth patches are performance optimizations in the driver. The qdio patch corrects a warning condition. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qdio: fix WARN_ON_ONCE conditionEugene Crosser
If HiperSockets Completion Queueing is enabled, qdio always issues a warning, since the condition is always met. This patch fixes the condition in WARN_ON_ONCE that was always true. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: optimize MAC handling in rx_mode callbackLakhvich Dmitriy
In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: switch to napi_gro_receiveThomas Richter
Add support for GRO (generic receive offload) in the layer 2 part of device driver qeth. This results in a performance improvement when GRO and RX is turned on. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'bridge-netlink-port-attrs'David S. Miller
Nikolay Aleksandrov says: ==================== bridge: netlink: complete port attribute support This is the second set that completes the bridge port's netlink support and makes everything from sysfs available via netlink. I've used sysfs as a guide of what and how to set again. I've tested setting/getting every option and also this time tested enabling KASAN. Again there're a few long line warnings about the ifla attribute names in br_port_info_size() but as the previous set - it's good to know what's been accounted for. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: add support for port's multicast_router attributeNikolay Aleksandrov
Add IFLA_BRPORT_MULTICAST_ROUTER to allow setting/getting port's multicast_router via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: allow to flush port's fdbNikolay Aleksandrov
Add IFLA_BRPORT_FLUSH to allow flushing port's fdb similar to sysfs's flush. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's timer valuesNikolay Aleksandrov
Add the following attributes in order to export port's timer values: IFLA_BRPORT_MESSAGE_AGE_TIMER, IFLA_BRPORT_FORWARD_DELAY_TIMER and IFLA_BRPORT_HOLD_TIMER. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's topology_change_ack and config_pendingNikolay Aleksandrov
Add IFLA_BRPORT_TOPOLOGY_CHANGE_ACK and IFLA_BRPORT_CONFIG_PENDING to allow getting port's topology_change_ack and config_pending respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's id and numberNikolay Aleksandrov
Add IFLA_BRPORT_(ID|NO) to allow getting port's port_id and port_no respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's designated cost and portNikolay Aleksandrov
Add IFLA_BRPORT_DESIGNATED_(COST|PORT) to allow getting the port's designated cost and port respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's bridge idNikolay Aleksandrov
Add IFLA_BRPORT_BRIDGE_ID to allow getting the designated bridge id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's root idNikolay Aleksandrov
Add IFLA_BRPORT_ROOT_ID to allow getting the designated root id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Lookup actual route when oif is VRF deviceDavid Ahern
If the user specifies a VRF device in a get route query the custom route pointing to the VRF device is returned: $ ip route ls table vrf-red unreachable default broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev vrf-red cache Add the flags to skip the custom route and go directly to the FIB. With this patch the actual route is returned: $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev eth1 src 10.2.1.2 cache Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge tag 'mac80211-next-for-davem-2015-10-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'l3mdev_saddr_op'David S. Miller
David Ahern says: ==================== net: Add saddr op to l3mdev and vrf First 2 patches are re-sends of patches that got lost in the ethosphere Tuesday; they were part of the first round of l3mdev conversions. Next 3 handle the source address lookup for raw and datagram sockets bound to a VRF device. The conversion to the get_saddr op also fixes locally originated TCP packets showing up at the VRF device. The use of the FLOWI_FLAG_L3MDEV_SRC flag in ip_route_connect_init was causing locally generated packets to skip the VRF device. v2 - rebased to top of net-next per device delete fix and hash based multipath patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add l3mdev saddr lookup to raw_sendmsgDavid Ahern
ping originated on box through a VRF device is showing up in tcpdump without a source address: $ tcpdump -n -i vrf-blue 08:58:33.311303 IP 0.0.0.0 > 10.2.2.254: ICMP echo request, id 2834, seq 1, length 64 08:58:33.311562 IP 10.2.2.254 > 10.2.2.2: ICMP echo reply, id 2834, seq 1, length 64 Add the call to l3mdev_get_saddr to raw_sendmsg. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add source address lookup op for VRFDavid Ahern
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Refactor path selection in __ip_route_output_key_hashDavid Ahern
VRF device needs the same path selection following lookup to set source address. Rather than duplicating code, move existing code into a function that is exported to modules. Code move only; no functional change. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add netif_is_l3_slaveDavid Ahern
IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Rename FLOWI_FLAG_VRFSRC to FLOWI_FLAG_L3MDEV_SRCDavid Ahern
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Fix vti use case with oif in dst lookups for IPv6David Ahern
It occurred to me yesterday that 741a11d9e4103 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7b274 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07gianfar: Add WAKE_UCAST and "wake-on-filer" supportClaudiu Manoil
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07powerpc: dts: p1022si: Add fsl,wake-on-filer for eTSECClaudiu Manoil
Enable the "wake-on-filer" (aka. wake on user defined packet) wake on lan capability for the eTSEC ethernet nodes. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07doc: dt: net: Add fsl,wake-on-filer for eTSECClaudiu Manoil
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'ovs-ipv6-tunnel'David S. Miller
Jiri Benc says: ==================== openvswitch: add IPv6 tunneling support This builds on the previous work that added IPv6 support to lwtunnels and adds IPv6 tunneling support to ovs. To use IPv6 tunneling, there needs to be a metadata based tunnel net_device created and added to the ovs bridge. Currently, only vxlan is supported by the kernel, with geneve to follow shortly. There's no need nor intent to add a support for this into the vport-vxlan (etc.) compat layer. v3: dropped the last two patches added in v2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: netlink attributes for IPv6 tunnelingJiri Benc
Add netlink attributes for IPv6 tunnel addresses. This enables IPv6 support for tunnels. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: add tunnel protocol to sw_flow_keyJiri Benc
Store tunnel protocol (AF_INET or AF_INET6) in sw_flow_key. This field now also acts as an indicator whether the flow contains tunnel data (this was previously indicated by tun_key.u.ipv4.dst being set but with IPv6 addresses in an union with IPv4 ones this won't work anymore). The new field was added to a hole in sw_flow_key. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: make br_fill_info's frame size smallerNikolay Aleksandrov
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add support for filtering neigh dump by device indexDavid Ahern
Add support for filtering neighbor dumps by device by adding the NDA_IFINDEX attribute to the dump request. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-03 This series contains updates to i40e and i40evf, some of which are to resolve more Red Hat bugzilla issues. Jiang Liu updates the i40e and i40evf drivers to use numa_mem_id() instead of numa_node_id() to get the nearest node with memory which better supports memoryless nodes. Anjali fixes an issue from Dan Carpenter <dan.carpenter@oracle.com>, to resolve a memory leak in X722 RSS configuration path, where we should free the memory allocated before exiting. Shannon modifies the drivers to ensure we have the spinlocks before we clear the ARQ and ASQ management registers. In addition, we widen the locked portion insert a sanity check to ensure we are working with safe register values. Mitch fixes an issue where under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this occurs, we need to parse it because our VSI may have changed and that will affect the relationship with the PF driver. But this parsing also blows away our current MAC address, so resolve the issue by restoring the current MAC address from the netdev struct after we parse the resource message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: better error reportingRussell King
Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 17:36:20 +0000