summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-13USB: ehci: add workaround for Synopsys HC bugGabor Juhos
A Synopsys USB core used in various SoCs has a bug which might cause that the host controller not issuing ping. When software uses the Doorbell mechanism to remove queue heads, the host controller still has references to the removed queue head even after indicating an Interrupt on Async Advance. This happens if the last executed queue head's Next Link queue head is removed. Consequences of the defect: The Host controller fetches the removed queue head, using memory that would otherwise be deallocated.This results in incorrect transactions on both the USB and system memory. This may result in undefined behavior. Workarounds: 1) If no queue head is active (no Status field's Active bit is set) after removing the queue heads, the software can write one of the valid queue head addresses to the ASYNCLISTADDR register and deallocate the removed queue head's memory after 2 microframes. If one or more of the queue heads is active (the Active bit is set in the Status field) after removing the queue heads, the software can delay memory deallocation after time X, where X is the time required for the Host Controller to go through all the queue heads once. X varies with the number of queue heads and the time required to process periodic transactions: if more periodic transactions must be performed, the Host Controller has less time to process asynchronous transaction processing. 2) Do not use the Doorbell mechanism to remove the queue heads. Disable the Asynchronous Schedule Enable bit instead. The bug has been discussed on the linux-usb-devel mailing-list four years ago, the original thread can be found here: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg45345.html This patch implements the first workaround as suggested by David Brownell. The built-in USB host controller of the Atheros AR7130/AR7141/AR7161 SoCs requires this to work properly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCsGabor Juhos
The Atheros AR71XX/AR91XX SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: EXYNOS4: Add usb ehci device to the NURI boardJoonyoung Shim
This patch is to support usb ehci device to the NURI board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: Add initial S5P EHCI driverJoonyoung Shim
This patch adds host USB high speed driver for samsung S5P series. This is initial driver and we need additional implementation to support some functions like power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: EXYNOS4: Add usb host phy controlJoonyoung Shim
EXYNOS4 has 2 phys for usb host and usb device. This patch supports to control usb host phy of EXYNOS4. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: S5P: Add usb ehci deviceJoonyoung Shim
This patch adds usb ehci device definition for samsung s5p cpus. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)"Johan Hovold
This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9. SAM-BA devices identify themselves CDC-ACM devices and should be using the cdc-acm driver. Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo modem without AT command capabilities) cdc-acm also binds to them. Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be able to select the device. This is simply a UI-issue that should be fixed by Atmel. Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: twl4030-usb: Report correct vbus value for accessory charger adapters1Matthias Kaehlcke
The twl4030-usb driver exports the status of VBUS as sysfs attribute. In case an accessory charger adapter (ACA) is connected to the OTG transceiver the attribute is always 'off', even when the charger provides VBUS. Added a variable to keep track of the status of VBUS and report it correctly Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@tomtom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: Mark ehci_adjust_port_wakeup_flags as __maybe_unusedFabio Estevam
Mark ehci_adjust_port_wakeup_flags as __maybe_unused to avoid the following warning when building the ehci-mxc driver: CC drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-hub.c:130: warning: 'ehci_adjust_port_wakeup_flags' defined but not used Current ehci-mxc driver implementation does not support suspend/resume. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: fix a typo in a commentWeiping Pan(潘卫平)
replace tranmitted with transmitted. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb/otg: fix twl6030 macroRandy Dunlap
Fix warning caused by stray semi-colon at end of macro: drivers/usb/otg/twl6030-usb.c:183: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Hema HK <hemahk@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: gadget: f_mass_storage: If 'ro'/'cdrom' specified, open file as read-onlyRoger Quadros
If we don't need Write access then attempt to open backing file in Read Only mode instead of bailing out too soon. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: gadget: f_mass_storage: Fix Bulk-only RESET handlingRoger Quadros
The ep0 request tag was not recorded thus resulting in phase problems while sending status/response in handle_execption() handler. This was resulting in MSC compliance test failures with USBCV tool. With this patch, the Bulk-Only Mass storage RESET request is handled correctly and the MSC compliance tests pass. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: u132-hcd: Drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: ftdi-elan: Drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: UHCI: don't try to revive a dead controllerAlan Stern
This patch (as1457) abandons the curious strategy of declaring a controller dead following hibernation merely in order to reset and then revive it. The core no longer allow dead controllers to spring back to life when the system resumes, so there's no reason to declare a working controller temporarily dead. Instead we do an explicit reset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: UHCI: remove uses of hcd->stateAlan Stern
This patch (as1456) removes all uses of hcd->state from the uhci-hcd driver, as part of the overall strategy to eliminate hcd->state completely. Now when a controller dies we call usb_hc_died() directly, instead of relying on the core interrupt handler to see that hcd->state has changed to HC_STATE_HALT and make the call for us. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: don't enter usb subdirectories directlyFelipe Balbi
Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb gadget: fix all Section mismatch warningsRandy Dunlap
Fix 41 occurrences of this type of Section mismatch warning in g_mass_storage, g_serial, g_cdc, g_multi, g_nokia, g_ether, g_ffs: (the 75 number reported earlier contained some duplicates.) WARNING: drivers/usb/gadget/g_mass_storage.o(.text+0x687a): Section mismatch in reference from the function fsg_bind() to the function .devinit.text:usb_ep_autoconfig() The function fsg_bind() references the function __devinit usb_ep_autoconfig(). This is often because fsg_bind lacks a __devinit annotation or the annotation of usb_ep_autoconfig is wrong. Also remove __devinit from usb_ep_autoconfig_reset() to prevent possible section mismatch problems with it. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: sl811: add Kconfig option for ISOCHRONOUS modeMike Frysinger
Some bluetooth dongles want ISO mode, and the limited support that the sl811 offers today is sufficient. So add a Kconfig option for people to optionally get access to the partial functionality. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: g_file_storage: don't send padding when stall=nAlan Stern
This patch (as1455) removes the extra padding sent by g_file_storage and g_mass_storage when the gadget wants to send less data than requested by the host and isn't allowed to halt the bulk-IN endpoint. Although the Bulk-Only Transport specification requires the padding to be present, it isn't truly needed since the transfer will be terminated by a short packet anyway. Furthermore, many existing devices don't bother to send any padding. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-By: Michal Nazarewicz <mina86@mina86.com> CC: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: remove dead code from usb_deregister_dev()Libor Pechacek
The `name' variable is unused in usb_deregister_dev() since commit d6e5bcf (devfs: Remove the mode field from usb_class_driver as it's no longer needed). Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: usb_storage: do not align length of request for CBW to maxp sizeMian Yousaf Kaukab
Mass-storage and file-storage gadgets align the length to maximum-packet-size when preparing the request to receive CBW. This is unnecessary and prevents the controller driver from knowing that a short-packet is expected. It is incorrect to set short_not_ok when preparing the request to receive CBW. CBW will be a short-packet so short_not_ok must not be set. This makes bh->bulk_out_intended_length unnecessary so it is also removed. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: re-write read processingJohan Hovold
Kill rx tasklet, which is no longer needed, and re-write read processing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: clean up read urb allocationJohan Hovold
Allocate read urbs and read buffers in the same loop during probe. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: clean up open error handlingJohan Hovold
No need to kill ctrl urb on errors as this is done later during close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: clean up rx_buflimit referencesJohan Hovold
Clean up references to rx_buflimit. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: remove unused drain-delay codeJohan Hovold
The drain-delay code is no longer used, so remove it. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: remove superfluous prototypeJohan Hovold
Remove unnecessary acm_tty_chars_in_buffer prototype. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: remove version information and changelogJohan Hovold
Remove driver version and changelog which can be retrieved from git history. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: use dev_vdbg in read/write pathsJohan Hovold
Replace dev_dbg with verbose dev_vdbg in read/write paths where appropriate. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: clean up verbose debugJohan Hovold
Clean up use of verbose debug. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: replace dbg macros with dev_dbgJohan Hovold
Replace all remaining instances of dbg with dev_dbg. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: clean up dev_err and dev_dbgJohan Hovold
Clean up some dev_err and dev_dbg messages and make sure that the appropriate interface device is used for reporting consistently throughout. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: use dev_err to report failed allocationsJohan Hovold
Upgrade out-of-memory dev_dbg to dev_err. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: cdc-acm: add missing newlines to dev_dbg and dev_errJohan Hovold
Add missing newline to two dev_dbg and dev_err messages. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: change the way we initialize format stringsDmitry Torokhov
Changing initialization from static const char *string = "blah"; to static const char string[] = "blah"; saves us one pointer per each string. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: renesas_usbhs: Add Renesas USBHS GadgetKuninori Morimoto
This patch add usb gadget code to SuperH USBHS. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb: renesas_usbhs: Add Renesas USBHS common codeKuninori Morimoto
Renesas SuperH has USBHS IP which can switch Host / Function. This driver is designed so that Host / Function may dynamically change. This patch add usb/renesas_usbhs and common code for SuperH USBHS. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-11Linux 2.6.39-rc3Linus Torvalds
2011-04-11Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: use proper interfaces for on-stack plugging xfs: fix xfs_debug warnings xfs: fix variable set but not used warnings xfs: convert log tail checking to a warning xfs: catch bad block numbers freeing extents. xfs: push the AIL from memory reclaim and periodic sync xfs: clean up code layout in xfs_trans_ail.c xfs: convert the xfsaild threads to a workqueue xfs: introduce background inode reclaim work xfs: convert ENOSPC inode flushing to use new syncd workqueue xfs: introduce a xfssyncd workqueue xfs: fix extent format buffer allocation size xfs: fix unreferenced var error in xfs_buf.c Also, applied patch from Tony Luck that fixes ia64: xfs_destroy_workqueues() should not be tagged with__exit in the branch before merging.
2011-04-11xfs_destroy_workqueues() should not be tagged with__exitLuck, Tony
ia64 throws away .exit sections for the built-in CONFIG case, so routines that are used in other circumstances should not be tagged as __exit. Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix data corruption regression by reverting commit 6de9843dab3f ext4: Allow indirect-block file to grow the file size to max file size ext4: allow an active handle to be started when freezing ext4: sync the directory inode in ext4_sync_parent() ext4: init timer earlier to avoid a kernel panic in __save_error_info jbd2: fix potential memory leak on transaction commit ext4: fix a double free in ext4_register_li_request ext4: fix credits computing for indirect mapped files ext4: remove unnecessary [cm]time update of quota file jbd2: move bdget out of critical section
2011-04-11Merge branch 'for-2.6.39' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux: nfsd4: fix oops on lock failure nfsd: fix auth_domain reference leak on nlm operations
2011-04-11Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: dt/fsldma: fix build warning caused by of_platform_device changes spi: Fix race condition in stop_queue() gpio/pch_gpio: Fix output value of pch_gpio_direction_output() gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output() gpio/pca953x: fix error handling path in probe() call
2011-04-11pci: fix PCI bus allocation alignment handlingLinus Torvalds
In commit 13583b16592a ("PCI: refactor io size calculation code") Ram had a thinko in the refactorization of the code: the end result used the variable 'align' for the bus alignment, but the original code used 'min_align'. Since then, another use of that 'align' variable got introduced by commit c8adf9a3e873 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") Fix both of those uses to use 'min_align' as they should. Daniel Hellstrom <daniel@gaisler.com> Acked-by: Ram Pai <linuxram@us.ibm.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
2011-04-10dt/fsldma: fix build warning caused by of_platform_device changesIra W. Snyder
Commit 000061245a6797d542854106463b6b20fbdcb12e, "dt/powerpc: Eliminate users of of_platform_{,un}register_driver" forgot to convert the type of structure passed into platform_device_register() when it was converted from of_platform_device_register. Fix it. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-10ext4: fix data corruption regression by reverting commit 6de9843dab3fTheodore Ts'o
Revert commit 6de9843dab3f2a1d4d66d80aa9e5782f80977d20, since it caused a data corruption regression with BitTorrent downloads. Thanks to Damien for discovering and bisecting to find the problem commit. https://bugzilla.kernel.org/show_bug.cgi?id=32972 Reported-by: Damien Grassart <damien@grassart.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10ext4: Allow indirect-block file to grow the file size to max file sizeKazuya Mio
We can create 4402345721856 byte file with indirect block mapping. However, if we grow an indirect-block file to the size with ftruncate(), we can see an ext4 warning. The following patch fixes this problem. How to reproduce: # dd if=/dev/zero of=/mnt/mp1/hoge bs=1 count=0 seek=4402345721856 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000221428 s, 0.0 kB/s # tail -n 1 /var/log/messages Nov 25 15:10:27 test kernel: EXT4-fs warning (device sda8): ext4_block_to_path:345: block 1074791436 > max in inode 12 Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:36:12 +0000