summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-22bnx2: Check if_running() before touching chip registers.Michael Chan
Add this check to bnx2_netif_stop() and bnx2_vlan_rx_register() to prevent bus lockups on some systems when the chip is in low power state. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-22bnx2: Zero out status block before chip reset.Michael Chan
In case IRQs are shared, we will not mistakenly start processing the ring based on old status block indices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-08-20MAINTAINERS: add information for mwl8k wireless driverLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: update copyright and version numberLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove mwl8k_queue_work()Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_configure_filter() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_get_stats() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_conf_tx() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_set_rts_threshold() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_bss_info_changed() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_config() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_stop() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: get rid of mwl8k_start() workqueue useLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: fix firmware command serialisationLennert Buytenhek
The current mwl8k_priv->fw_lock spinlock doesn't actually protect against multiple commands being submitted at once, as it is not kept held over the entire firmware command submission. And since waiting for command completion sleeps, we can't use a spinlock anyway. To fix mwl8k firmware command serialisation properly, we have the following requirements: - Some commands require that the packet transmit path is idle when the command is issued. (For simplicity, we'll just quiesce the transmit path for every command.) - There are certain sequences of commands that need to be issued to the hardware sequentially, with no other intervening commands. This leads to an implementation of a "firmware lock" as a mutex that can be taken recursively, and which is taken by both the low-level command submission function (mwl8k_post_cmd) as well as any users of that function that require issuing of an atomic sequence of commands, and quiesces the transmit path whenever it's taken. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: mwl8k_queue_work() cleanupLennert Buytenhek
Delete most of the mwl8k_work_struct fields and options, since most of them are unused or never changed from their defaults: - We always use priv->config_wq, so delete the wqueue argument from mwl8k_queue_work(). - MWL8K_WQ_SPIN and MWL8K_WQ_POST_REQUEST are never used, as all callers sleep for request completion, so sleep unconditionally. - MWL8K_WQ_FREE_WORKSTRUCT is never used. - MWL8K_WQ_TX_WAIT_EMPTY is always set, so assume it unconditionally. - timeout_ms/txwait_attempts/tx_timeout_ms are never changed from their defaults, so just hardcode these in the workqueue worker. - step is never used. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: mwl8k_txq_xmit() reworkLennert Buytenhek
Various mwl8k_txq_xmit changes: - Extract the QoS field before adding the DMA header. - Only write to tx->status once, and only after all the other descriptor fields have been set. - Do all tx state manipulation under the tx spinlock. - Remove the priv->inconfig check, as all transmit queues will be frozen during config cycles, so we won't ever be asked to transmit if a config cycle is running. - Remove some more dead code. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: implement idle modeLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: no need to hold ->tx_lock while setting the hardware interrupt maskLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: don't hardcode the number of transmit queuesLennert Buytenhek
Use MWL8K_TX_QUEUES instead of a hardcoded "4" in a couple of places. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: don't touch 'command done' interrupt during firmware loadLennert Buytenhek
Since firmware load commands don't generate 'command done' interrupts like normal commands do, polling for command done interrupts just unnecessarily slows down the firmware load process. Removing this bit of code speeds up loading a typical firmware image from 840 msec to 180 msec. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: dma header manipulations can't failLennert Buytenhek
Adding and removing the DMA header that the mwl8k hardware requires on tx and provides on rx can never fail, since we are guaranteed to have enough headroom on the tx path to expand the packet, and we only ever shrink the packet on the rx path. (And on both paths we are guaranteed to be the only user of the skb we are handling.) This allows removing all of the skb clone handling in the tx and tx reclaim paths, and eliminates error checks in both the tx and rx paths, simplifying the code a bit more. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: ->add_interface() is not called for monitor interfacesLennert Buytenhek
There is no need to check for NL80211_IFTYPE_MONITOR in ->add_interface(), as this function is never called for monitor interfaces. Also, there is no need to advertise this bit in our wiphy's ->interface_modes. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: fix mwl8k_configure_filter() parameter lifetime issueLennert Buytenhek
mwl8k_configure_filter() passes pointers to total_flags and the multicast address list to a workqueue function, while there is no guarantee that those pointers will still be valid by the time the workqueue function runs. Solve this by passing total_flags by value, and by passing an already built multicast address setup command packet to the workqueue function so that we don't have to look at the multicast address list itself outside of mwl8k_configure_filter(). Also, since ->configure_filter() can sleep now, wait synchronously for the worker to finish. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove MWL8K_*_SLOTTIME definesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove MWL8K_WMM_* definesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove MWL8K_RADIO_*_PREAMBLE definesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove MWL8K_RADIO_* definesLennert Buytenhek
Instead of passing a flag bitmask to mwl8k_cmd_802_11_radio_control, pass the 'enable' and 'force' arguments as separate parameters, and introduce wrappers for the common cases of enabling and disabling without forcing. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: various coding style cleanupsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: sort firmware command list by opcode, and trim unused commandsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: s/IEEE80211_ADDR_LEN/ETH_ALEN/gLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mwl8k: remove various unused struct members and definesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Nuke struct ath9k_node_statsVasanthakumar Thiagarajan
Other than ns_avgbrssi (Average beacon rssi) no data of ath9k_node_stats is being used anywhere. Nuke this structure and move its only useful member to ar5416Anistate. Also cleanup this redundant data in ath_softc. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath9k: Fix bug in retrieving average beacon rssiVasanthakumar Thiagarajan
Currently the beacon rssi that LPF gives is divided and rounded up by ATH_RSSI_EP_MULTIPLIER twice. This will leave the incorrect rssi in ANI. Having correct rssi in ANI fixes the connection stability at < 30dB rssi range. This patch removes the unncessary computation of average rssi over already valid average rssi. Also removes the redundant macros to find average rssi. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: add hardware tkipgregor kowski
This add hardware tkip for b43. Signed-off-by: Gregor Kowski <gregor.kowski@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: fix register_hw error pathJohannes Berg
"cfg80211: fix alignment problem in scan request" introduced a bug into the error path, because now we allocate the entire scan request and not just the channel list (the channel list is allocated together with the scan request) -- on errors we thus also need to free the entire scan request. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Implement spec updates and remove resolved FIXMEsGábor Stefanik
Larry has started re-checking all current routines against a new version of the Broadcom MIPS driver. This patch implements the first round of changes he documented on the specs wiki. Also remove a few FIXMEs regarding missing initial values for variables with dynamic initial values where reading the values has been implemented. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: allow cfg80211_connect_result with bssid == NULLZhu Yi
In case of connection failure, the bssid info is not a must have. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20orinoco: remove spare whitespaceDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix leaks of wdev->conn->ieDavid Kilroy
This only occurs in the following error situations: - driver calls connect_result with failure - error scheduling authentication on connect - error initiating scan (to get BSSID and channel) on connect - userspace calls disconnect while in the SCANNING or SCAN_AGAIN states Signed-off-by: David Kilroy <kilroyd@googlemail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ar9170: refactor configure_filterChristian Lamparter
Thanks to "mac80211: allow configure_filter callback to sleep", we no longer have to defer the work to the workqueue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Two small spec updatesGábor Stefanik
The specs are beginning to support rev3 LP-PHYs - implement one of the changes needed for rev3 support. Also, in the new MIPS driver, the "Japan TX filter" was renamed to "analog TX filter init" - however, calling it "init" is confusing, so name it "set analog filter", with a comment for easier future identification. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: bss_info_changed() callback is allowed to sleepIvo van Doorn
The bss_info_changed() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver directly. Additionaly this makes the DRIVER_REQUIRE_SCHEDULED flag redundant so it can be removed. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rt2x00: configure_filter() callback is allowed to sleepIvo van Doorn
The configure_filter() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver configure_filter() directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20cfg80211: fix dangling scan request checkingJohannes Berg
My patch "cfg80211: fix deadlock" broke the code it was supposed to fix, the scan request checking. But it's not trivial to put it back the way it was, since the original patch had a deadlock. Now do it in a completely new way: queue the check off to a work struct, where we can freely lock. But that has some more complications, like needing to wait for it to be done before the wiphy/rdev can be destroyed, so some code is required to handle that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ipw2x00: fix sparse warningsReinette Chatre
This fixes: CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:7888:22: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:7952:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8000:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here CC [M] drivers/net/wireless/ipw2x00/ipw2100.o CHECK drivers/net/wireless/ipw2x00/ipw2200.c drivers/net/wireless/ipw2x00/ipw2200.c:847:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:891:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:935:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:980:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1016:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1051:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1823:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6228:28: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6369:20: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6857:12: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:7964:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8720:12: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9662:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9720:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9826:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:10318:21: warning: symbol 'remaining_bytes' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:10184:13: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8338:45: warning: cast to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: expected restricted __le16 [usertype] size drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: expected restricted __le16 [usertype] tx_rates drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: got unsigned short [unsigned] [usertype] rates_mask drivers/net/wireless/ipw2x00/ipw2200.c:6124:29: warning: bad assignment (>>=) to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6130:31: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6140:23: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6149:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6154:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6159:55: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: warning: invalid assignment: |= drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: right side has type unsigned short drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: expected signed char [signed] [usertype] [explicitly-signed] rt_dbmnoise drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: got restricted __le16 [usertype] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: expected signed char [signed] [usertype] [explicitly-signed] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: got restricted __le16 [usertype] noise Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20mac80211: New stat counters for multicast and unicast forwarded framesDaniel Walker
This expands on the current fwded_frames stat counter which should be equal to the total of these two new counters. The new counters are called "fwded_mcast" and "fwded_unicast". Signed-off-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20wl1271: remove print_mac usageJohn W. Linville
CC [M] drivers/net/wireless/wl12xx/wl1271_main.o drivers/net/wireless/wl12xx/wl1271_main.c: In function ‘wl1271_op_add_interface’: drivers/net/wireless/wl12xx/wl1271_main.c:611: warning: ‘print_mac’ is deprecated (declared at include/linux/if_ether.h:142) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20rc80211_pid_algo.c: remove unused variable declarationJohn W. Linville
CC [M] net/mac80211/rc80211_pid_algo.o net/mac80211/rc80211_pid_algo.c: In function ‘rate_control_pid_rate_init’: net/mac80211/rc80211_pid_algo.c:304: warning: unused variable ‘si’ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath: move regulatory info into shared common structureLuis R. Rodriguez
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 06:45:53 +0000