summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-17tty/serial: omap: empty the RX FIFO at the end of half-duplex TXDimitris Lampridis
Provided that the SER_RS485_RX_DURING_TX flag is not set, empty the RX FIFO to prevent reading back the transmitted data. Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17tty/serial: omap: fix RX interrupt enable/disable in half-duplex TXDimitris Lampridis
Make sure that serial_omap_stop_rx() also disables RDI (Receiver Data Interrupt), otherwise the interrupt handler will call serial_omap_rdi() to read the new data, resulting in the transmission being echoed back. When the half-duplex transmission is complete, in order to reverse the effects of serial_omap_stop_rx(), we should re-enable: * the RX interrupts _without_ overwriting up->ier * the UART_LSR_DR bit of the up->port.read_status_mask Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Neaten dev_<level> usesJoe Perches
Add missing newlines and coalesce formats. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFFGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Add more register documentationGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Remove useless castsGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: sh-sci: Replace printk() by pr_*()Geert Uytterhoeven
Make banner const while we're at it Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial_core: Avoid NULL pointer dereference in uart_close()Geert Uytterhoeven
When unbinding a serial driver that's being used as a serial console, the kernel may crash with a NULL pointer dereference in a uart_*() function called from uart_close () (e.g. uart_flush_buffer() or uart_chars_in_buffer()). To fix this, let uart_close() check for port->count == 0. If this is the case, bail out early. Else tty_port_close_start() will make the port counts inconsistent, printing out warnings like tty_port_close_start: tty->count = 1 port count = 0. and tty_port_close_start: count = -1 and once uport == NULL, it will also crash. Also fix the related crash in pr_debug() by checking for a non-NULL uport first. Detailed description: On driver unbind, uart_remove_one_port() is called. Basically it; - marks the port dead, - calls tty_vhangup(), - sets state->uart_port = NULL. What will happen depends on whether the port is just in use by e.g. getty, or was also opened as a console. A. If the tty was not opened as a console: - tty_vhangup() will (in __tty_hangup()): - mark all file descriptors for this tty hung up by pointing them to hung_up_tty_fops, - call uart_hangup(), which sets port->count to 0. - A subsequent uart_open() (this may be through /dev/ttyS*, or through /dev/console if this is a serial console) will fail with -ENXIO as the port was marked dead, - uart_close() after the failed uart_open() will return early, as tty_hung_up_p() (called from tty_port_close_start()) will notice it was hung up. B. If the tty was also opened as a console: - tty_vhangup() will (in __tty_hangup()): - mark non-console file descriptors for this tty hung up by pointing them to hung_up_tty_fops, - NOT call uart_hangup(), but instead call uart_close() for every non-console file descriptor, so port->count will still have a non-zero value afterwards. - A subsequent uart_open() will fail with -ENXIO as the port was marked dead, - uart_close() after the failed uart_open() starts to misbehave: - tty_hung_up_p() will not notice it was hung up, - As port->count is non-zero, tty_port_close_start() will decrease port->count, making the tty and port counts inconsistent. Later, warnings like these will be printed: tty_port_close_start: tty->count = 1 port count = 0. and tty_port_close_start: count = -1 - If all of this happens after state->uart_port was set to zero, a NULL pointer dereference will happen. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial_core: Get a reference for port->tty in uart_remove_one_port()Geert Uytterhoeven
Suggested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: clps711x: Give a chance to perform useful tasks during wait loopAlexander Shiyan
This patch adds cond_sched() calls during wait loop to perform other tasks. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial_core: Grammar s/ports/port's/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial_core: Spelling s/contro/control/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: efm32: properly namespace location propertyUwe Kleine-König
While reviewing an i2c driver for efm32 that needs a similar property Wolfram Sang pointed out that "location" is a too generic name for something that is efm32 specific. So add an appropriate namespace and fall back to the generic name in case of failure. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17serial: max310x: Add missing #include <linux/uaccess.h>Geert Uytterhoeven
cris allmodconfig: drivers/tty/serial/max310x.c: In function 'max310x_ioctl': drivers/tty/serial/max310x.c:885:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] drivers/tty/serial/max310x.c:916:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17synclink: fix info leak in ioctlSalva Peiró
The hdlcdev_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08serial: 8250: Clean up the locking for -rtIngo Molnar
In -RT the spin_lock_irqsave() does not spin but sleep if the lock is taken. Before that, local_irq_save() is invoked which disables interrupts even on -RT. Therefore local_irq_save() + spin_lock() does not work. In the ->sysrq and oops_in_progress case it is save to trylock the lock i.e. this is what we do now anyway except for ->sysrq where we assume that the lock is already taken. The spin_lock_irqsave() grabs the lock and disables the interrupts on vanilla (the same behavior) and on -RT it won't disable interrupts. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bigeasy: add a patch description] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08serial: 8250_pci: change BayTrail default uartclkAaron Sierra
The Intel BayTrail HSUART power-on default reference clock is 44.2368 MHz, but 73.728 MHz provides 0% error for additional "conventional" baud rates above 460800 (e.g. 576000, 921600, and 1152000). Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08serial: 8250_pci: more BayTrail error-free baudsAaron Sierra
Support the following additional baud rates with 0% error: 500000, 1500000, 2500000, 3500000 Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-02Merge 3.14-rc5 into tty-nextGreg Kroah-Hartman
We want these fixes in here
2014-03-02Linux 3.14-rc5Linus Torvalds
2014-03-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx and tegra fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: avoid null pointer dereference at failure paths drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. drm/vmwgfx: Remove some unused surface formats drm/radeon: enable speaker allocation setup on dce3.2 drm/radeon: change audio enable logic drm/radeon: fix audio disable on dce6+ drm/radeon: free uvd ring on unload drm/radeon: disable pll sharing for DP on DCE4.1 drm/radeon: fix missing bo reservation drm/radeon: print the supported atpx function mask MAINTAINERS: update drm git tree entry MAINTAINERS: add entry for drm radeon driver drm/tegra: Add guard to avoid double disable/enable of RGB outputs gpu: host1x: do not check previously handled gathers drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
2014-03-02Merge tag 'usb-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 2 USB patches for 3.14-rc5, one a new device id, and the other fixes a reported problem with threaded irqs and the USB EHCI driver" * tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: ehci: fix deadlock when threadirqs option is used USB: ftdi_sio: add Cressi Leonardo PID
2014-03-02Merge tag 'driver-core-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull sysfs fix from Greg KH: "Here is a single sysfs fix for 3.14-rc5. It fixes a reported problem with the namespace code in sysfs" * tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: fix namespace refcnt leak
2014-03-02Merge tag 'staging-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg KH: "Here are a few IIO fixes, and a new device id for a staging driver for 3.14-rc5. All have been in linux-next for a while, I did a final merge to get the IIO fixes into this tree, they were incorrectly in the char-misc tree for a few weeks, and I forgot to tell you to pull them from there. This makes it a single pull request for you" * tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID staging:iio:adc:MXS:LRADC: fix touchscreen statemachine iio:gyro: bug on L3GD20H gyroscope support iio: cm32181: Change cm32181 ambient light sensor driver iio: cm36651: Fix read/write integration time function.
2014-03-03Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes more radeon fixes * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: enable speaker allocation setup on dce3.2 drm/radeon: change audio enable logic drm/radeon: fix audio disable on dce6+ drm/radeon: free uvd ring on unload drm/radeon: disable pll sharing for DP on DCE4.1 drm/radeon: fix missing bo reservation drm/radeon: print the supported atpx function mask
2014-03-02Merge iio fixes into staging-linusGreg Kroah-Hartman
These I forgot about before, but need to get into 3.14-final. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes, most of them on the tooling side" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix strict alias issue for find_first_bit perf tools: fix BFD detection on opensuse perf: Fix hotplug splat perf/x86: Fix event scheduling perf symbols: Destroy unused symsrcs perf annotate: Check availability of annotate when processing samples
2014-03-02Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes A couple of minor fixes. Pull request of 2014-03-02 * tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: avoid null pointer dereference at failure paths drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. drm/vmwgfx: Remove some unused surface formats
2014-03-02drm/vmwgfx: avoid null pointer dereference at failure pathsAlexey Khoroshilov
vmw_takedown_otable_base() and vmw_mob_unbind() check for potential vmw_fifo_reserve() failure and print error message, but then immediately dereference NULL pointer. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-03-02drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver ↵Thomas Hellstrom
date. Backing mob contents is propagated to user-space, so make sure backing mobs are cleared when allocated. This also accidently fix rendering errors with celestia when emulating legacy mode. Also update driver date. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-02drm/vmwgfx: Remove some unused surface formatsThomas Hellstrom
These formats are deprecated. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "The VMCOREINFO patch I'll pushing for this release to avoid having a release with kASLR and but without that information. I was hoping to include the FPU patches from Suresh, but ran into a problem (see other thread); will try to make them happen next week" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kaslr: add missed "static" declarations x86, kaslr: export offset in VMCOREINFO ELF notes
2014-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the series are bugfixes for qla2xxx target NPIV support that went in for v3.14-rc1. Also included are a few DIF related fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi protocol version related fix from Venkatesh. Also just a heads up that a series to address a number of issues with iser-target active I/O reset/shutdown is still being tested, and will be included in a separate -rc6 PULL request" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Check LUN structure byte 0 is set to 1, per spec qla2xxx: Fix kernel panic on selective retransmission request Target/sbc: Don't use sg as iterator in sbc_verify_read target: Add DIF sense codes in transport_generic_request_failure target/sbc: Fix sbc_dif_copy_prot addr offset bug tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs tcm_qla2xxx: Perform configfs depend/undepend for base_tpg tcm_qla2xxx: Add NPIV specific enable/disable attribute logic qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown qla2xxx: Fix qlt_lport_register base_vha callback race
2014-03-01Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma fixes from Vinod Koul: "This request brings you two small fixes. First one for fixing dereference of freed descriptor and second for fixing sdma bindings for it to work for imx25. I was planning to send this about 10days ago but then I had to proceed on my paternity leave and didnt get chance to send this. Now got a bit of time from dady duties :)" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: sdma: Add imx25 compatible dma: ste_dma40: don't dereference free:d descriptor
2014-03-01Merge tag 'pm+acpi-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These three commits fix a recent intel_pstate regression and two old bugs that should be fixed in -stable too, one in the ACPI processor driver and one in the firmare loader. Specifics: - One of the recent intel_pstate driver fixes introduced a rounding error that on some systems causes the frequency to be stuck at the lowest level forever. Fix from Dirk Brandewie. - The firmware_class driver's PM notifier doesn't handle the PM_RESTORE_PREPARE event during hibernation image restore and that leads to a deadlock on umhelper_sem in __usermodehelper_disable(). Fix from Sebastian Capella. - acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up() among other things. Fix from Lan Tianyu" * tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Rework processor throttling with work_on_cpu() PM / hibernate: Fix restore hang in freeze_processes() intel_pstate: Change busy calculation to use fixed point math.
2014-03-01Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent build fixes for certain distro environments, from Arnaldo Carvalho de Melo: * Problem on recent gcc on x86-32 related to strict alias issue for find_first_bit (Jiri Olsa). * OpenSuSE: BFD detection problems related to not explicitely listing all required libraries (Andi Kleen) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-28Merge tag 'fixes-for-3.14d' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Fourth set of IIO fixes for the 3.14 kernel. A single line patch fixing a regression that was introduced in 3.13 in the reworking of the mxs touch screen and ADC drivers to be interrupt rather than polling driven. It resulted in a stray double reporting of the release coordinate in the touch screen driver. The bug lay in the adc side of the driver which left the statemachine in the wrong state.
2014-02-28serial: sh-sci: Add missing call to uart_remove_one_port() in failure pathGeert Uytterhoeven
If cpufreq_register_notifier() fails, we have to remove the port added by sci_probe_single(), which is not done by sci_cleanup_single(). Else the serial port stays active from the point of view of the serial subsystem, and it may crash when userspace getty is started, or when the loadable driver module is unloaded. This was introduced by commit 6dae14216c85eea13db7b12c469475c5d30e5499 ("serial: sh-sci: Fix probe error paths"). Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28serial_core: Unregister console in uart_remove_one_port()Geert Uytterhoeven
If the serial port being removed is used as a console, it must also be unregistered from the console subsystem using unregister_console(). uart_ops.release_port() will release resources (e.g. iounmap() the serial port registers), causing a crash on subsequent kernel output if the console is still registered. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty/serial: at91: remove unused open/close hooksRichard Genoud
commit 95e629b761ce36996d1befe2824d5346b5a220b9 removed the use of board specific hooks in serial_at91.h, so now, the open/close hook are just dead code. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty/serial: at91: use dev_err instead of printkRichard Genoud
For better consistency. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty: Set correct tty name in 'active' sysfs attributeHannes Reinecke
The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. There is one special-case, which is tty0. If the console is directed to it, we want 'tty0' to show up in the file, so user-space knows that the messages get forwarded to the active VT. The ->device() callback would resolve tty0, though. Hence, treat it special and don't call into the VT layer to resolve it (plymouth is known to depend on it). Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28serial: imx: Remove init() and exit() platform callbacksAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28serial: imx: Use dev_name() for request_irq() to distinguish UARTsAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28serial: imx: Use devm_ioremap_resource()Alexander Shiyan
Use devm_ioremap_resource() in order to make the code simpler and it gives proper codes on errors. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty: Fix low_latency BUGPeter Hurley
The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db89799bdf11625a831c5af33938dcb11908b6, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by: Beat Bolli <bbolli@ewanet.ch> Reported-by: Pavel Roskin <proski@gnu.org> Acked-by: David Sterba <dsterba@suse.cz> Cc: Grant Edwards <grant.b.edwards@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net> Cc: <stable@vger.kernel.org> # 3.12.x+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty: serial: bcm63xx_uart: add support for DT probingFlorian Fainelli
Add a matching table for the the bcm63xx_uart driver on the compatible string "brcm,bcm6345-uart" which covers all BCM63xx implementations and reflects the fact that this block was first introduced with the BCM6345 SoC. Also make sure that we convert the id based on the uart aliases provided by the relevant Device Tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty: serial: bcm63xx_uart: define UART_REG_SIZE constantFlorian Fainelli
The bcm63xx_uart driver uses RSET_UART_SIZE which is a constant defined for MIPS-based BCM63xx platforms, pull this constant value from the MIPS-specific header and put it in include/linux/serial_bcm63xx.h to make the driver platform agnostic. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28tty: serial: bcm63xx_uart: include linux/io.hFlorian Fainelli
Include linux/io.h which provides the definition for __raw_{readl,writel}, this is not necessary on MIPS since there is an implicit inclusion, but it is on ARM for instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28vt: detect and ignore OSC codes.Adam Borowski
These can be used to send commands consisting of an arbitrary string to the terminal, most often used to set a terminal's window title or to redefine the colour palette. Our console doesn't use OSC, unlike everything else, which can lead to junk being displayed if a process sends such a code unconditionally. The rules for termination follow established practice rather than Ecma-48. Ecma-48 requires the string to use only byte values 0x08..0x0D and 0x20..0x7E, terminated with either ESC \ or 0x9C. This would disallow using 8-bit characters, which are reasonable for example in window titles. A widespread idiom is to terminate with 0x07. The behaviour for other control characters differs between terminal emulators, I followed libvte and xterm: * 0x07 and ESC anything terminate * nothing else terminates, all 8-bit values including 0x9C are considered a part of the string Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 02:41:10 +0000