summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-31powerpc/nvram: Fix endian issue when reading the NVRAM sizeCedric Le Goater
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-31powerpc/nvram: Scan partitions only onceCedric Le Goater
nvram_scan_partitions() is called twice when initializing the "lnx,oops-log" partition and the "ibm,rtas-log" partition. This fills the partition list with duplicate entries. This patch moves the partition scan in the init routine pseries_nvram_init_log_partitions() which is called only once. Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/powernv: Code update interfaceVasant Hegde
Code update interface for powernv platform. This provides sysfs interface to pass new image, validate, update and commit images. This patch includes: - Below OPAL APIs for code update - opal_validate_flash() - opal_manage_flash() - opal_update_flash() - Create below sysfs files under /sys/firmware/opal - image : Interface to pass new FW image - validate_flash : Validate candidate image - manage_flash : Commit/Reject operations - update_flash : Flash new candidate image Updating Image: "update_flash" is an interface to indicate flash new FW. It just passes image SG list to FW. Actual flashing is done during system reboot time. Note: - SG entry format: I have kept version number to keep this list similar to what PAPR is defined. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/powernv: Create opal sysfs directoryVasant Hegde
Create /sys/firmware/opal directory. We wil use this interface to fetch opal error logs, firmware update, etc. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Add VMX optimised xor for RAID5Anton Blanchard
Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade this is a decent win: 32regs : 17932.800 MB/sec altivec : 19724.800 MB/sec The bigger gain is when the same test is run in SMT4 mode, as it would if there was a lot of work going on: 8regs : 8377.600 MB/sec altivec : 15801.600 MB/sec I tested this against an array created without the patch, and also verified it worked as expected on a little endian kernel. [ Fix !CONFIG_ALTIVEC build -- BenH ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/kexec: kexec_sequence() is in misc_64.SGeert Uytterhoeven
Correct reference to the location of the kexec_sequence() assembly helper. There never was a kexec_stub.S in mainline. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Use 32 bit loads and stores when operating on condition register valuesAnton Blanchard
The condition register (CR) is a 32 bit quantity so we should use 32 bit loads and stores. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable virtio on ppc64 and pseries configsAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable multipath modules on ppc64 and pseriesAnton Blanchard
Enable a few modules required to boot on a POWER multipath box. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: sync ppc64, ppc64e and pseries configsAnton Blanchard
Run savedefconfig over the ppc64, ppc64e and pseries config Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Use -mcpu=power7 on ppc64 little endian buildsAnton Blanchard
Using -mcpu=power7 allows gcc to use a number of new instructions including 64 bit byte reversed loads. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/pseries: Fix dedicated processor partition detectionAnton Blanchard
commit f13c13a00512 (powerpc: Stop using non-architected shared_proc field in lppaca) fixed a potential issue with shared/dedicated partition detection. The old method of detection relied on an unarchitected field (shared_proc), and this patch switched to using something architected (a non zero yield_count). Unfortunately the assertion in the Linux header that yield_count is only non zero on shared processor partitions is not true. It turns out dedicated processor partitions can increment yield_count and as such we falsely detect dedicated partitions as shared. Fix the comment, and switch back to using the old method. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Unaligned LE Floating Point Loads and StoresTom Musta
This patch addresses unaligned single precision floating point loads and stores in the single-step code. The old implementation improperly treated an 8 byte structure as an array of two 4 byte words, which is a classic little endian bug. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Unaligned Loads and StoresTom Musta
This patch modifies the unaligned access routines of the sstep.c module so that it properly reverses the bytes of storage operands in the little endian kernel kernel. This is implemented by breaking an unaligned little endian access into a combination of single byte accesses plus an overal byte reversal operation. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Enable Little Endian Alignment Handler for Float Pair InstructionsTom Musta
This patch enables alignment handling for the load/store floating point pair instructions (lfdp, lfdpx, stfdp, stfdpx). The handler routine is properly coded and only needs to be enabled. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix Handler of Unaligned Load/Store StringsTom Musta
The alignment handler is incorrect for unaligned string instructions in little endian mode. These instructions access data as arrays of bytes and thus are endian neutral. However, the routine also handles the load/store multiple instructions, which are NOT endian neutral. This patch toggles the byte swapping flag for the string instructions in little endian builds. This effectively disables the byte swapping logic. Signed-off-by: Tom Musta <tmusta@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/pseries: Fix endian issues in pseries iommu codeAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix little endian issue in OF PCI scanAnton Blanchard
This issue was causing the QEMU emulated USB device to fail dring PCI probe. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/vio: use strcpy in modalias_showPrarit Bhargava
Commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 used strcat instead of strcpy which can result in an overflow of newlines on the buffer. Signed-off-by: Prarit Bhargava Cc: benh@kernel.crashing.org Cc: ben@decadent.org.uk Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix 64K page size support for PPC44xAlistair Popple
PPC44x supports page sizes other than 4K however when 64K page sizes are selected compilation fails. This is due to a change in the definition of pgtable_t introduced by the following patch: commit 5c1f6ee9a31cbdac90bbb8ae1ba4475031ac74b4 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> powerpc: Reduce PTE table memory wastage The above patch only implements the new layout for PPC64 so it doesn't compile for PPC32 with a 64K page size. Ideally we should implement the same layout for PPC32 however for the meantime this patch reverts the definition of pgtable_t for PPC32. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: FA_DUMP depends on KEXECMichael Ellerman
If you try and build the FA_DUMP code with CONFIG_KEXEC=n, you see errors such as the following: arch/powerpc/kernel/fadump.c 408:2: error: 'crashing_cpu' undeclared (first use in this function) 410:2: error: implicit declaration of function 'crash_save_vmcoreinfo' 513:22: error: storage size of 'prstatus' isn't known 520:2: error: implicit declaration of function 'elf_core_copy_kernel_regs' 521:36: error: 'KEXEC_CORE_NOTE_NAME' undeclared (first use in this function) 624:49: error: 'note_buf_t' undeclared (first use in this function) 872:2: error: implicit declaration of function 'paddr_vmcoreinfo_note' 874:18: error: 'vmcoreinfo_max_size' undeclared (first use in this function) This is because although FA_DUMP doesn't use kexec as the actual reboot mechanism, it does use parts of the kexec code to assemble/disassemble the crash image. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix a typo in comments of va to pa conversionVaishnavi Bhat
This patch fixes typo in comments virtual to physical address conversion. Signed-off-by: Vaishnavi Bhat <vaishnavi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Move local setup.h declarations to arch includesRobert Jennings
Move the few declarations from arch/powerpc/kernel/setup.h into arch/powerpc/include/asm/setup.h. This resolves a sparse warning for arch/powerpc/mm/numa.c which defines do_init_bootmem() but can't include the setup.h header in the prior path. Resolves: arch/powerpc/mm/numa.c:998:13: warning: symbol 'do_init_bootmem' was not declared. Should it be static? Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix warnings for arch/powerpc/mm/numa.cRobert Jennings
Simple fixes for sparse warnings in this file. Resolves: arch/powerpc/mm/numa.c:198:24: warning: Using plain integer as NULL pointer arch/powerpc/mm/numa.c:1157:5: warning: symbol 'hot_add_node_scn_to_nid' was not declared. Should it be static? arch/powerpc/mm/numa.c:1238:28: warning: Using plain integer as NULL pointer arch/powerpc/mm/numa.c:1538:6: warning: symbol 'topology_schedule_update' was not declared. Should it be static? Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/boot: Don't change link address for OF-based platformsPaul Mackerras
Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") adjusts the wrapper address unnecessarily for platforms that use arch/powerpc/boot/of.c, since the code there allocates space for the kernel wherever it can find it and doesn't necessarily load the kernel at address 0. Changing the link address is actually harmful since it can cause the zImage to overlap with Open Firmware and thus fail to boot. To fix this, we set make_space to n for all of the platforms that use of.o. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Add includes to fix powernv/rng.c buildStephen Rothwell
Caused by commit a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv") from the powerpc tree interacting with commit b5b4bb3f6a11 ("of: only include prom.h on sparc") from the dt-rh tree. I added this merge fix patch (which will need to be sent to Linus when these two trees get merged, or could be applied now to the powerpc tree): [ Also add linux/smp.h to get cpu_to_chip_id -- BenH ] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt
Highlights include corenet board file consolidation, the ability to run userspaces with lwsync on e500v1/v2, some cleanup patches that other KVM patches will build on, support for stripped-down e6500 emulation targets, and some fixes of minor longstanding issues.
2013-10-30Merge branch 'for-kvm' into nextBenjamin Herrenschmidt
Add Paul's fix for 32-bit register corruption in the new FP code
2013-10-28powerpc: Fix PPC_EMULATED_STATS build break with sync patchScott Wood
Commit 9863c28a2af90a56c088f5f6288d7f6d2c923c14 ("powerpc: Emulate sync instruction variants") introduced a build breakage with CONFIG_PPC_EMULATED_STATS enabled. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Kumar Gala <galak@kernel.org> Cc: James Yang <James.Yang@freescale.com> ---
2013-10-28powerpc/6xx: CONFIG_MCU_MPC8349EMITX cannot be a moduleChristian Kujau
During "make ppc6xx_defconfig" the following happens: HOSTCC scripts/basic/fixdep GEN /usr/local/src/tmp/lnx/Makefile HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning go away. This too has been reported by Geert Uytterhoeven a long time ago: https://lkml.org/lkml/2011/11/13/11 - I only came across this because I needed a "clean" defconfig for this Powerbook G5. Signed-off-by: Christian Kujau <lists@nerdbynature.de> [scottwood@freescale.com: cleaned up commit message slightly] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/mv643xx_eth: fix return check in mv64x60_eth_register_shared_pdev()Wei Yongjun
In case of error, the function platform_device_register_simple() returns RR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/p1010rdb: add P1010RDB-PB platform supportZhao Qiang
The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA). So, P1010RDB-PB use the same platform file as P1010RDB. Then Add support for P1010RDB-PB platform. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28arch/powerpc/platforms/83xx: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/6xx: add missing iounmap() on error in hlwd_pic_init()Wei Yongjun
Add the missing iounmap() before return from hlwd_pic_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/8xx: Fixing memory init issue with CONFIG_PIN_TLBLEROY Christophe
Activating CONFIG_PIN_TLB allows access to the 24 first Mbytes of memory at bootup instead of 8. It is needed for "big" kernels for instance when activating CONFIG_LOCKDEP_SUPPORT. This needs to be taken into account in init_32 too, otherwise memory allocation soon fails after startup. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/8xx: Fixing issue with CONFIG_PIN_TLBLEROY Christophe
Activating CONFIG_PIN_TLB is supposed to pin the IMMR and the first three 8Mbytes pages. But the setting of MD_CTR to a pinnable entry was missing before the pinning of the third 8Mb page. As the index is decremented module 28 (MD_RSV4D is set) after every DTLB update, the third 8Mbytes page was not pinned. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/85xx: use one kernel option for all the CoreNet_Generic boardsKevin Hao
Currently all these boards use the same machine struct and also select the same kernel options, so it seems a bit of redundant to keep one separate kernel option for each board. Also update the defconfigs according to this change. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/85xx: rename the corenet_ds.c to corenet_generic.cKevin Hao
This file is also used by some RDB and QDS boards. So the name seems not so accurate. Rename it to corenet_generic.c. Also update the function names in this file according to the change. Signed-off-by: Kevin Hao <haokexin@gmail.com>
2013-10-28powerpc/85xx: introduce corenet_generic machineKevin Hao
In the current kernel, the board files for p2041rdb, p3041ds, p4080ds, p5020ds, p5040ds, t4240qds and b4qds are almost the same except the machine name. So this introduces a cornet_generic machine to support all these boards to avoid the code duplication. With these changes the file corenet_ds.h becomes useless. Just delete it. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts/c293pcie: Add range field for IFC NANDPrabhakar Kushwaha
C290PCIe has NAND flash present on IFC Chip Select(CS) 1. So Add "ranges" field for NAND flash on CS1. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/b4860emu: Add device tree file for b4860emuYork Sun
B4860EMU is a emualtor target with minimum peripherals. It is based on B4860QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/t4240emu: Add device tree file for t4240emuYork Sun
T4240EMU is an emulator target with minimum peripherals. It is based on T4240QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/b4qds: enable coreintScott Wood
Commit 9837b43c5f3514e5d28f65f1513f4dc6759d2810 ("powerpc/85xx: enable coreint for all the 64bit boards") removed the ifdef that avoided coreint on 64-bit, but it missed b4_qds.c. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Shaveta Leekha <shaveta@freescale.com>
2013-10-28powerpc/8xx: Revert commit e0908085fc2391c85b85fb814ae1df377c8e0dcbLEROY Christophe
The commit e0908085fc2391c85b85fb814ae1df377c8e0dcb ("powerpc/8xx: Fix regression introduced by cache coherency rewrite") is not needed anymore. The issue was because dcbst wrongly sets the store bit when causing a DTLB error, but this is now fixed by commit 0a2ab51ffb8dfdf51402dcfb446629648c96bc78 ("powerpc/8xx: Fixup DAR from buggy dcbX instructions.") which handles the buggy dcbx instructions on data page faults on the 8xx. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood@freescale.com: fix commit message] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc: Add I2C bus multiplexer node for B4 and T4240QDSHongtao Jia
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used. The sub-nodes are also reorganized according to right I2C topology. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/fsl/defconfig: enable CONFIG_AT803X_PHYShengzhou Liu
Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts: Correct sdhci quirk for bsc9131Haijun.Zhang
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12" to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/eSDCH: Specify voltage for T4240QDSHaijun.Zhang
Freescale T4240QDS reference board has extra voltage shifters added to allow 3.3V operation, so add 3.3v voltage support for T4240QDS. 1.8v and 3.3v is recommand for eMMC and SDHC card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/mpc8xx: Clearer Oops message for Software Emulation ExceptionLEROY Christophe
This patch modifies the Oops message in case of Software Emulation Exception. The existing message is quite confusing because it refers to FPU Emulation while most often the issue is due to either a non supported instruction (not necessarily FPU related) or a stale instruction due to HW issues. The new message tries to be more generic in order to make the user understand that the Oops is due to something wrong with an instruction, not necessarily due to an FPU instruction. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc: Set the NOTE type for SPE regsetSuzuki Poulose
The regset defintion for SPE doesn't have the core_note_type set, which prevents it from being dumped. Add the note type NT_PPC_SPE for SPE regset. Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 14:58:36 +0000