summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-22Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits) via-velocity: Fix velocity driver unmapping incorrect size. mlx4_en: Remove redundant refill code on RX mlx4_en: Removed redundant check on lso header size mlx4_en: Cancel port_up check in transmit function mlx4_en: using stop/start_all_queues mlx4_en: Removed redundant skb->len check mlx4_en: Counting all the dropped packets on the TX side usbnet cdc_subset: fix issues talking to PXA gadgets Net: qla3xxx, remove sleeping in atomic ipv4: fix NULL pointer + success return in route lookup path isdn: clean up documentation index cfg80211: validate station settings cfg80211: allow setting station parameters in mesh cfg80211: allow adding/deleting stations on mesh ath5k: fix beacon_int handling MAINTAINERS: Fix Atheros pattern paths ath9k: restore PS mode, before we put the chip into FULL SLEEP state. ath9k: wait for beacon frame along with CAB acer-wmi: fix rfkill conversion ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling ...
2009-06-22Making fs/minix/minix.h double including safeHitoshi Mitake
I happened to find that fs/minix/minix.h doesn't guard double include. Yes, I know this never cause something destructive because this is self-evidence that no source file includes minix.h twice, but I think fixing this is better than disregarding it. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22msm: fixups to match current codeAlan Cox
The tty layer is now a bit more fussy about reporting the right baud rate back. Make the msm driver match the current state of affairs. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22msm_serial: serial driver for MSM7K onboard serial peripheral.Robert Love
Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22timbuart: Fix for tx_emptyRichard Röjfors
Hardware updated to support TX FIFO empty. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22tty: n_hdlc add buffer flushingPaul Fulghum
Add flush_buffer tty callback to flush rx buffers. Add TCFLSH ioctl processing to flush tx buffers. Increase default tx buffers from 1 to 3. Remove unneeded flush_buffer call in open callback. Remove vendor specific CVS version string. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: samsung.c: mark s3c24xx_serial_remove as __devexitPeter Korsgaard
Mark the remove function as __devexit so it gets eliminated in CONFIG_HOTPLUG=n builds. Saves ~100 bytes. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial@ add OMAP wakeup-enable registerKevin Hilman
Add the wakeup enable register to the list of OMAP-specific UART registers. This is to support forthcoming OMAP PM enhancements which use the wakeup feature of the OMAP's 8250-based UART. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22tty: fix some bogns in the serqt_usb2 driverAlan Cox
Remove the replicated urban legends from the comments and fix a couple of other silly calls Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22ppp: Fix throttling bugsAlan Cox
The ppp layer goes around calling the unthrottle method from non sleeping paths. This isn't safe because the unthrottle methods in the tty layer need to be able to sleep (consider a USB dongle). Until now this didn't show up because the ppp layer never actually throttled a port so the unthrottle was always a no-op. Currently it's a mutex taking path so warnings are spewed if the unthrottle occurs via certain paths. Fix this by removing the unneccessary unthrottle calls. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22vt_ioctl: fix lock imbalanceJiri Slaby
Don't return from switch/case directly in vt_ioctl. Set ret and break instead so that we unlock BKL. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22pcmcia/cm4000: fix lock imbalanceJiri Slaby
Don't return from switch/case, break instead, so that we unlock BKL. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22n_r3964: fix lock imbalanceJiri Slaby
There is omitted BKunL in r3964_read. Centralize the paths to one point with one unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: fix off by one errorsRoel Kluin
In zs_console_putchar() occurs: if (zs_transmit_drain(zport, irq)) write_zsdata(zport, ch); However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches -1 => true, and the write still occurs. This patch changes postfix to prefix decrements in this and similar functions to prevent similar mistakes in the future. This decreases the iterations with one but the chosen loop count was arbitrary anyway. In sunhv limit reaches -1, not 0, so the test is off by one. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: bfin_5xx: fix building as module when early printk is enabledMike Frysinger
Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22serial: bfin_5xx: add missing spin_lock initMike Frysinger
The Blackfin serial driver never initialized the spin_lock that is part of the serial core structure, but we never noticed because spin_lock's are rarely enabled on UP systems. Yeah lockdep and friends. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22bfin_jtag_comm: clean up printk usageMike Frysinger
The original patch garned some feedback and a v2 was posted, but that version seems to have been missed when merging the driver. At any rate, this cleans up the printk usage as suggested by Jiri Slaby. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22parport_pc: set properly the dma_mask for parport_pc deviceFUJITA Tomonori
parport_pc_probe_port() creates the own 'parport_pc' device if the device argument is NULL. Then parport_pc_probe_port() doesn't initialize the dma_mask and coherent_dma_mask of the device and calls dma_alloc_coherent with it. dma_alloc_coherent fails because dma_alloc_coherent() doesn't accept the uninitialized dma_mask: http://lkml.org/lkml/2009/6/16/150 Long ago, X86_32 and X86_64 had the own dma_alloc_coherent implementations; X86_32 accepted a device having dma_mask that is not initialized however X86_64 didn't. When we merged them, we chose to prohibit a device having dma_mask that is not initialized. I think that it's good to require drivers to set up dma_mask (and coherent_dma_mask) properly if the drivers want DMA. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reported-by: Malcom Blaney <malcolm.blaney@maptek.com.au> Tested-by: Malcom Blaney <malcolm.blaney@maptek.com.au> Cc: stable@kernel.org Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22parport_pc: after superio probing restore original register valuesJens Rottmann
CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing byte sequences to a set of different potential I/O ranges. But the probed ranges are not exclusive to parallel ports. Some of our boards just happen to have a watchdog in one of them. Took us almost a week to figure out why some distros reboot without warning after running flawlessly for 3 hours. For exactly 170 = 0xAA minutes, that is ... Fixed by restoring original values after probing. Also fixed too small request_region() in detect_and_report_it87(). Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: <stable@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Revert "char: moxa, prevent opening unavailable ports"Linus Torvalds
This reverts commit a90b037583d5f1ae3e54e9c687c79df82d1d34a4, which already got fixed as commit f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47: the same patch (trivial differences) got applied twice. Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21via-velocity: Fix velocity driver unmapping incorrect size.Dave Jones
When a packet is greater than ETH_ZLEN, we end up assigning the boolean result of a comparison to the size we unmap. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Remove redundant refill code on RXYevgeny Petrilin
Our RX rings are always full, there is no need to check whether we need to fill them or not. If we fail to allocate a new socket buffer, the incoming packet is dropped an the ring remains full. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Removed redundant check on lso header sizeYevgeny Petrilin
This check that verifies that the LSO header along with control segment and first data segment do not cross 128 bytes is no longer required. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Cancel port_up check in transmit functionYevgeny Petrilin
When closing the port, we stop all transmit queues under the transmit lock. It ensures that we will not attempt to transmit new packets after the physical port was closed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: using stop/start_all_queuesYevgeny Petrilin
After we moved to be a multi queue device, need to stop/start all of our transmit queues. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Removed redundant skb->len checkYevgeny Petrilin
We don't need this check in the transmit function Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21mlx4_en: Counting all the dropped packets on the TX sideYevgeny Petrilin
Reporting the counter's value through 'ethtool -S' Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: remove needless double parenthesis sdhci: Specific quirk vor VIA SDHCI controller in VX855ES s3cmci: fix dma configuration call mmc: Add new via-sdmmc host controller driver sdhci: Add support for hosts that are only capable of 1-bit transfers MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface) sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk sdhci: Add better ADMA error reporting sdhci-s3c: Samsung S3C based SDHCI controller glue
2009-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template crypto: aes-ni - Do not sleep when using the FPU crypto: aes-ni - Fix cbc mode IV saving crypto: padlock-aes - work around Nano CPU errata in CBC mode crypto: padlock-aes - work around Nano CPU errata in ECB mode
2009-06-21Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Select frame pointers on x86 dma-debug: be more careful when building reference entries dma-debug: check for sg_call_ents in best-fit algorithm too
2009-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add model=6530g option ALSA: hda - Acer Inspire 6530G model for Realtek ALC888 ALSA: snd_usb_caiaq: fix legacy input streaming ASoC: Kill BUS_ID_SIZE ALSA: HDA - Correct trivial typos in comments. ALSA: HDA - Name-fixes in code (tagra/targa) ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard. ALSA: hda - Fix memory leak at codec creation
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21Remove internal use of 'write_access' in mm/memory.cLinus Torvalds
The fault handling routines really want more fine-grained flags than a single "was it a write fault" boolean - the callers will want to set flags like "you can return a retry error" etc. And that's actually how the VM works internally, but right now the top-level fault handling functions in mm/memory.c all pass just the 'write_access' boolean around. This switches them over to pass around the FAULT_FLAG_xyzzy 'flags' variable instead. The 'write_access' calling convention still exists for the exported 'handle_mm_fault()' function, but that is next. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21ipc: unbreak 32-bit shmctl/semctl/msgctlJohannes Weiner
31a985f "ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h" would choose the implementation of ipc_parse_version() based on a symbol defined in <asm/unistd.h>. But it failed to also include this header and thus broke IPC_64-passing 32-bit userspace because the flag wasn't masked out properly anymore and the command not understood. Include <linux/unistd.h> to give the architecture a chance to ask for the no-no-op ipc_parse_version(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21sdhci: remove needless double parenthesisPierre Ossman
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Specific quirk vor VIA SDHCI controller in VX855ESHarald Welte
The SDHCI controller found in the VX855ES requires 10ms delay between applying power and applying clock. This issue has been discovered and documented by the OLPC XO1.5 team. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21s3cmci: fix dma configuration callBen Dooks
This was missed in the DMA changes during the s3c24xx updates in commit 8970ef47d56fd3db28ee798b9d400caf08abd924. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21mmc: Add new via-sdmmc host controller driverHarald Welte
This adds the via-sdmmc driver for the SD/MMC-controller of VIA, which is found in a number of recent integrated VIA chipset products. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Add support for hosts that are only capable of 1-bit transfersAnton Vorontsov
Some hosts (hardware configurations, or particular SD/MMC slots) may not support 4-bit bus. For example, on MPC8569E-MDS boards we can switch between serial (1-bit only) and nibble (4-bit) modes, thought we have to disable more peripherals to work in 4-bit mode. Along with some small core changes, this patch modifies sdhci-of driver, so that now it looks for "sdhci,1-bit-only" property in the device-tree, and if specified we enable a proper quirk. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)Nicolas Ferre
Add MAINTAINERS entry for atmel-mci driver. This driver was maintained by its author: Haavard Skinnemoen. I take the maintainance of it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirkBen Dooks
Add quirk to show the controller cannot do multi-block IO. This is mainly for the Samsung SDHCI controller that currently cannot manage to do multi-block PIO without timing out. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci: Add better ADMA error reportingBen Dooks
Update the ADMA error reporting to not only show the overall controller state but also to print the ADMA descriptor list. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21sdhci-s3c: Samsung S3C based SDHCI controller glueBen Dooks
Add support for the 'HSMMC' block(s) in the Samsung SoC line. These are compatible with the SDHCI driver so add the necessary setup and driver binding for the platform devices. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-21Merge branch 'topic/hda' into for-linusTakashi Iwai
* topic/hda: ALSA: hda - Add model=6530g option ALSA: hda - Acer Inspire 6530G model for Realtek ALC888 ALSA: HDA - Correct trivial typos in comments. ALSA: HDA - Name-fixes in code (tagra/targa) ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard. ALSA: hda - Fix memory leak at codec creation
2009-06-21Merge branch 'topic/caiaq' into for-linusTakashi Iwai
* topic/caiaq: ALSA: snd_usb_caiaq: fix legacy input streaming
2009-06-21Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: ASoC: Kill BUS_ID_SIZE
2009-06-21ALSA: hda - Add model=6530g optionTakashi Iwai
Add the new model string corresponding to the previous Acer Aspire 6530G support. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-21ALSA: hda - Acer Inspire 6530G model for Realtek ALC888Tony Vroon
The selected 4930G model seemed to keep the subwoofer 'tuba' function from operating correctly. Removing the existing PCI ID match made this work again, but it was mapped to 'Side' instead of to LFE as one would expect. This attempts to enable all functionality and keep the amount of available mixer sliders low. Any slider that had no audible effect on the output audio has been removed, and as such EAPD is not currently enabled. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-21lockdep: Select frame pointers on x86Peter Zijlstra
x86 stack traces are a piece of crap without frame pointers, and its not like the 'performance gain' of not having stack pointers matters when you selected lockdep. Reported-by: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <new-submission> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 04:39:51 +0000