summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-29Merge 4.4.159 into android-4.4Greg Kroah-Hartman
Changes in 4.4.159 NFC: Fix possible memory corruption when handling SHDLC I-Frame commands NFC: Fix the number of pipes ASoC: cs4265: fix MMTLR Data switch control ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO platform/x86: alienware-wmi: Correct a memory leak xen/netfront: don't bug in case of too many frags xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code ring-buffer: Allow for rescheduling when removing pages mm: shmem.c: Correctly annotate new inodes for lockdep gso_segment: Reset skb->mac_len after modifying network header ipv6: fix possible use-after-free in ip6_xmit() net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT net: hp100: fix always-true check for link up state neighbour: confirm neigh entries when ARP packet is received scsi: target: iscsi: Use hex2bin instead of a re-implementation ocfs2: fix ocfs2 read block panic drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() tty: vt_ioctl: fix potential Spectre v1 ext4: avoid divide by zero fault when deleting corrupted inline directories ext4: recalucate superblock checksum after updating free blocks/inodes ext4: fix online resize's handling of a too-small final block group ext4: fix online resizing for bigalloc file systems with a 1k block size ext4: don't mark mmp buffer head dirty arm64: Add trace_hardirqs_off annotation in ret_to_user HID: sony: Update device ids HID: sony: Support DS4 dongle iw_cxgb4: only allow 1 flush on user qps Linux 4.4.159 Change-Id: I98239ca60783ca69147f2f11034138fc22e2af65 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2018-09-29Linux 4.4.159Greg Kroah-Hartman
2018-09-29iw_cxgb4: only allow 1 flush on user qpsSteve Wise
commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream. Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29HID: sony: Support DS4 dongleRoderick Colenbrander
commit de66a1a04c25f2560a8dca7a95e2a150b0d5e17e upstream. Add support for USB based DS4 dongle device, which allows connecting a DS4 through Bluetooth, but hides Bluetooth from the host system. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29HID: sony: Update device idsRoderick Colenbrander
commit cf1015d65d7c8a5504a4c03afb60fb86bff0f032 upstream. Support additional DS4 model. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29arm64: Add trace_hardirqs_off annotation in ret_to_userCatalin Marinas
commit db3899a6477a4dccd26cbfb7f408b6be2cc068e0 upstream. When a kernel is built with CONFIG_TRACE_IRQFLAGS the following warning is produced when entering userspace for the first time: WARNING: at /work/Linux/linux-2.6-aarch64/kernel/locking/lockdep.c:3519 Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc3+ #639 Hardware name: Juno (DT) task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 PC is at check_flags.part.22+0x19c/0x1a8 LR is at check_flags.part.22+0x19c/0x1a8 pc : [<ffffffc0000fba6c>] lr : [<ffffffc0000fba6c>] pstate: 600001c5 sp : ffffffc9768abe10 x29: ffffffc9768abe10 x28: ffffffc9768a8000 x27: 0000000000000000 x26: 0000000000000001 x25: 00000000000000a6 x24: ffffffc00064be6c x23: ffffffc0009f249e x22: ffffffc9768a0000 x21: ffffffc97fea5480 x20: 00000000000001c0 x19: ffffffc00169a000 x18: 0000005558cc7b58 x17: 0000007fb78e3180 x16: 0000005558d2e238 x15: ffffffffffffffff x14: 0ffffffffffffffd x13: 0000000000000008 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: fefefefefefeff63 x9 : 7f7f7f7f7f7f7f7f x8 : 6e655f7371726964 x7 : 0000000000000001 x6 : ffffffc0001079c4 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc001698438 x2 : 0000000000000000 x1 : ffffffc9768a0000 x0 : 000000000000002e Call trace: [<ffffffc0000fba6c>] check_flags.part.22+0x19c/0x1a8 [<ffffffc0000fc440>] lock_is_held+0x80/0x98 [<ffffffc00064bafc>] __schedule+0x404/0x730 [<ffffffc00064be6c>] schedule+0x44/0xb8 [<ffffffc000085bb0>] ret_to_user+0x0/0x24 possible reason: unannotated irqs-off. irq event stamp: 502169 hardirqs last enabled at (502169): [<ffffffc000085a98>] el0_irq_naked+0x1c/0x24 hardirqs last disabled at (502167): [<ffffffc0000bb3bc>] __do_softirq+0x17c/0x298 softirqs last enabled at (502168): [<ffffffc0000bb43c>] __do_softirq+0x1fc/0x298 softirqs last disabled at (502143): [<ffffffc0000bb830>] irq_exit+0xa0/0xf0 This happens because we disable interrupts in ret_to_user before calling schedule() in work_resched. This patch adds the necessary trace_hardirqs_off annotation. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ext4: don't mark mmp buffer head dirtyLi Dongyang
commit fe18d649891d813964d3aaeebad873f281627fbc upstream. Marking mmp bh dirty before writing it will make writeback pick up mmp block later and submit a write, we don't want the duplicate write as kmmpd thread should have full control of reading and writing the mmp block. Another reason is we will also have random I/O error on the writeback request when blk integrity is enabled, because kmmpd could modify the content of the mmp block(e.g. setting new seq and time) while the mmp block is under I/O requested by writeback. Signed-off-by: Li Dongyang <dongyangli@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ext4: fix online resizing for bigalloc file systems with a 1k block sizeTheodore Ts'o
commit 5f8c10936fab2b69a487400f2872902e597dd320 upstream. An online resize of a file system with the bigalloc feature enabled and a 1k block size would be refused since ext4_resize_begin() did not understand s_first_data_block is 0 for all bigalloc file systems, even when the block size is 1k. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ext4: fix online resize's handling of a too-small final block groupTheodore Ts'o
commit f0a459dec5495a3580f8d784555e6f8f3bf7f263 upstream. Avoid growing the file system to an extent so that the last block group is too small to hold all of the metadata that must be stored in the block group. This problem can be triggered with the following reproducer: umount /mnt mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \ -E resize=1073741824 /tmp/foo.img 128M mount /tmp/foo.img /mnt truncate --size 1708M /tmp/foo.img resize2fs /dev/loop0 295400 umount /mnt e2fsck -fy /tmp/foo.img Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ext4: recalucate superblock checksum after updating free blocks/inodesTheodore Ts'o
commit 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a upstream. When mounting the superblock, ext4_fill_super() calculates the free blocks and free inodes and stores them in the superblock. It's not strictly necessary, since we don't use them any more, but it's nice to keep them roughly aligned to reality. Since it's not critical for file system correctness, the code doesn't call ext4_commit_super(). The problem is that it's in ext4_commit_super() that we recalculate the superblock checksum. So if we're not going to call ext4_commit_super(), we need to call ext4_superblock_csum_set() to make sure the superblock checksum is consistent. Most of the time, this doesn't matter, since we end up calling ext4_commit_super() very soon thereafter, and definitely by the time the file system is unmounted. However, it doesn't work in this sequence: mke2fs -Fq -t ext4 /dev/vdc 128M mount /dev/vdc /vdc cp xfstests/git-versions /vdc godown /vdc umount /vdc mount /dev/vdc tune2fs -l /dev/vdc With this commit, the "tune2fs -l" no longer fails. Reported-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ext4: avoid divide by zero fault when deleting corrupted inline directoriesTheodore Ts'o
commit 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 upstream. A specially crafted file system can trick empty_inline_dir() into reading past the last valid entry in a inline directory, and then run into the end of xattr marker. This will trigger a divide by zero fault. Fix this by using the size of the inline directory instead of dir->i_size. Also clean up error reporting in __ext4_check_dir_entry so that the message is clearer and more understandable --- and avoids the division by zero trap if the size passed in is zero. (I'm not sure why we coded it that way in the first place; printing offset % size is actually more confusing and less useful.) https://bugzilla.kernel.org/show_bug.cgi?id=200933 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Wen Xu <wen.xu@gatech.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29tty: vt_ioctl: fix potential Spectre v1Gustavo A. R. Silva
commit e97267cb4d1ee01ca0929638ec0fcbb0904f903d upstream. vsa.console is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue 'vc_cons' [r] Fix this by sanitizing vsa.console before using it to index vc_cons Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()Lyude Paul
commit 6833fb1ec120bf078e1a527c573a09d4de286224 upstream. It's true we can't resume the device from poll workers in nouveau_connector_detect(). We can however, prevent the autosuspend timer from elapsing immediately if it hasn't already without risking any sort of deadlock with the runtime suspend/resume operations. So do that instead of entirely avoiding grabbing a power reference. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ocfs2: fix ocfs2 read block panicJunxiao Bi
commit 234b69e3e089d850a98e7b3145bd00e9b52b1111 upstream. While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29scsi: target: iscsi: Use hex2bin instead of a re-implementationVincent Pelletier
commit 1816494330a83f2a064499d8ed2797045641f92c upstream. This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29neighbour: confirm neigh entries when ARP packet is receivedVasily Khoruzhick
[ Upstream commit f0e0d04413fcce9bc76388839099aee93cd0d33b ] Update 'confirmed' timestamp when ARP packet is received. It shouldn't affect locktime logic and anyway entry can be confirmed by any higher-layer protocol. Thus it makes sense to confirm it when ARP packet is received. Fixes: 77d7123342dc ("neighbour: update neigh timestamps iff update is effective") Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29net: hp100: fix always-true check for link up stateColin Ian King
[ Upstream commit a7f38002fb69b44f8fc622ecb838665d0b8666af ] The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value that is always non-zero and hence the wait for the link to drop always terminates prematurely. Fix this by using a logical not operator instead of a bitwise complement. This issue has been in the driver since pre-2.6.12-rc2. Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRTWilly Tarreau
[ Upstream commit 9824dfae5741275473a23a7ed5756c7b6efacc9d ] Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn <jannh@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ipv6: fix possible use-after-free in ip6_xmit()Eric Dumazet
[ Upstream commit bbd6528d28c1b8e80832b3b018ec402b6f5c3215 ] In the unlikely case ip6_xmit() has to call skb_realloc_headroom(), we need to call skb_set_owner_w() before consuming original skb, otherwise we risk a use-after-free. Bring IPv6 in line with what we do in IPv4 to fix this. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29gso_segment: Reset skb->mac_len after modifying network headerToke Høiland-Jørgensen
[ Upstream commit c56cae23c6b167acc68043c683c4573b80cbcc2c ] When splitting a GSO segment that consists of encapsulated packets, the skb->mac_len of the segments can end up being set wrong, causing packet drops in particular when using act_mirred and ifb interfaces in combination with a qdisc that splits GSO packets. This happens because at the time skb_segment() is called, network_header will point to the inner header, throwing off the calculation in skb_reset_mac_len(). The network_header is subsequently adjust by the outer IP gso_segment handlers, but they don't set the mac_len. Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6 gso_segment handlers, after they modify the network_header. Many thanks to Eric Dumazet for his help in identifying the cause of the bug. Acked-by: Dave Taht <dave.taht@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29mm: shmem.c: Correctly annotate new inodes for lockdepJoel Fernandes (Google)
commit b45d71fb89ab8adfe727b9d0ee188ed58582a647 upstream. Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: NeilBrown <neilb@suse.com> Suggested-by: NeilBrown <neilb@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ring-buffer: Allow for rescheduling when removing pagesVaibhav Nagarnaik
commit 83f365554e47997ec68dc4eca3f5dce525cd15c3 upstream. When reducing ring buffer size, pages are removed by scheduling a work item on each CPU for the corresponding CPU ring buffer. After the pages are removed from ring buffer linked list, the pages are free()d in a tight loop. The loop does not give up CPU until all pages are removed. In a worst case behavior, when lot of pages are to be freed, it can cause system stall. After the pages are removed from the list, the free() can happen while the work is rescheduled. Call cond_resched() in the loop to prevent the system hangup. Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com Cc: stable@vger.kernel.org Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic") Reported-by: Jason Behmer <jbehmer@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29xen/x86/vpmu: Zero struct pt_regs before calling into sample handling codeBoris Ostrovsky
commit 70513d58751d7c6c1a0133557b13089b9f2e3e66 upstream. Otherwise we may leak kernel stack for events that sample user registers. Reported-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29xen/netfront: don't bug in case of too many fragsJuergen Gross
commit ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c upstream. Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29platform/x86: alienware-wmi: Correct a memory leakMario Limonciello
commit ff0e9f26288d2daee4950f42b37a3d3d30d36ec1 upstream. An ACPI buffer that was allocated was not being freed after use. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFOWilly Tarreau
commit 49434c6c575d2008c0abbc93e615019f39e01252 upstream. snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ALSA: bebob: use address returned by kmalloc() instead of kernel stack for ↵Takashi Sakamoto
streaming DMA mapping commit 493626f2d87a74e6dbea1686499ed6e7e600484e upstream. When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST', an address of 'payload' argument is used for streaming DMA mapping by 'firewire_ohci' module if 'size' argument is larger than 8 byte. Although in this case the address should not be on kernel stack, current implementation of ALSA bebob driver uses data in kernel stack for a cue to boot M-Audio devices. This often brings unexpected result, especially for a case of CONFIG_VMAP_STACK=y. This commit fixes the bug. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021 Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165 Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series') Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ASoC: cs4265: fix MMTLR Data switch controlSébastien Szymanski
commit 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 upstream. The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29NFC: Fix the number of pipesSuren Baghdasaryan
commit e285d5bfb7e9785d289663baef252dd315e171f8 upstream. According to ETSI TS 102 622 specification chapter 4.4 pipe identifier is 7 bits long which allows for 128 unique pipe IDs. Because NFC_HCI_MAX_PIPES is used as the number of pipes supported and not as the max pipe ID, its value should be 128 instead of 127. nfc_hci_recv_from_llc extracts pipe ID from packet header using NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127. Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With pipes array having only 127 elements and pipe ID of 127 the OOB memory access will result. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Allen Pais <allen.pais@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29NFC: Fix possible memory corruption when handling SHDLC I-Frame commandsSuren Baghdasaryan
commit 674d9de02aa7d521ebdf66c3958758bdd9c64e11 upstream. When handling SHDLC I-Frame commands "pipe" field used for indexing into an array should be checked before usage. If left unchecked it might access memory outside of the array of size NFC_HCI_MAX_PIPES(127). Malformed NFC HCI frames could be injected by a malicious NFC device communicating with the device being attacked (remote attack vector), or even by an attacker with physical access to the I2C bus such that they could influence the data transfers on that bus (local attack vector). skb->data is controlled by the attacker and has only been sanitized in the most trivial ways (CRC check), therefore we can consider the create_info struct and all of its members to tainted. 'create_info->pipe' with max value of 255 (uint8) is used to take an offset of the hdev->pipes array of 127 elements which can lead to OOB write. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Allen Pais <allen.pais@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Suggested-by: Kevin Deus <kdeus@google.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-27Merge remote-tracking branch 'origin/upstream-f2fs-stable-linux-4.4.y' into ↵Jaegeuk Kim
android-4.4 * origin/upstream-f2fs-stable-linux-4.4.y: f2fs: readahead encrypted block during GC f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc f2fs: fix performance issue observed with multi-thread sequential read f2fs: fix to skip verifying block address for non-regular inode f2fs: rework fault injection handling to avoid a warning f2fs: support fault_type mount option f2fs: fix to return success when trimming meta area f2fs: fix use-after-free of dicard command entry f2fs: support discard submission error injection f2fs: split discard command in prior to block layer f2fs: wake up gc thread immediately when gc_urgent is set f2fs: fix incorrect range->len in f2fs_trim_fs() f2fs: refresh recent accessed nat entry in lru list f2fs: fix avoid race between truncate and background GC f2fs: avoid race between zero_range and background GC f2fs: fix to do sanity check with block address in main area v2 f2fs: fix to do sanity check with inline flags f2fs: fix to reset i_gc_failures correctly f2fs: fix invalid memory access f2fs: fix to avoid broken of dnode block list f2fs: use true and false for boolean values f2fs: fix to do sanity check with cp_pack_start_sum f2fs: avoid f2fs_bug_on() in cp_error case f2fs: fix to clear PG_checked flag in set_page_dirty() f2fs: fix to active page in lru list for read path f2fs: don't keep meta pages used for block migration f2fs: fix to restrict mount condition when without CONFIG_QUOTA f2fs: quota: do not mount as RDWR without QUOTA if quota feature enabled f2fs: quota: fix incorrect comments f2fs: add proc entry to show victim_secmap bitmap f2fs: let checkpoint flush dnode page of regular f2fs: issue discard align to section in LFS mode f2fs: don't allow any writes on aborted atomic writes f2fs: restrict setting up inode.i_advise f2fs: fix wrong kernel message when recover fsync data on ro fs f2fs: clean up ioctl interface naming f2fs: clean up with f2fs_is_{atomic,volatile}_file() f2fs: clean up with f2fs_encrypted_inode() f2fs: clean up with get_current_nat_page f2fs: kill EXT_TREE_VEC_SIZE f2fs: avoid duplicated permission check for "trusted." xattrs f2fs: fix to propagate error from __get_meta_page() f2fs: fix to do sanity check with i_extra_isize f2fs: blk_finish_plug of submit_bio in lfs mode f2fs: do not set free of current section f2fs: Keep alloc_valid_block_count in sync f2fs: issue small discard by LBA order f2fs: stop issuing discard immediately if there is queued IO f2fs: clean up with IS_INODE() f2fs: detect bug_on in f2fs_wait_discard_bios f2fs: fix defined but not used build warnings f2fs: enable real-time discard by default f2fs: fix to detect looped node chain correctly f2fs: fix to do sanity check with block address in main area f2fs: fix to skip GC if type in SSA and SIT is inconsistent f2fs: try grabbing node page lock aggressively in sync scenario f2fs: show the fsync_mode=nobarrier mount option f2fs: check the right return value of memory alloc function f2fs: Replace strncpy with memcpy f2fs: avoid the global name 'fault_name' f2fs: fix to do sanity check with reserved blkaddr of inline inode f2fs: fix to do sanity check with node footer and iblocks f2fs: Allocate and stat mem used by free nid bitmap more accurately f2fs: fix to do sanity check with user_block_count f2fs: fix to do sanity check with extra_attr feature f2fs: fix to correct return value of f2fs_trim_fs f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize f2fs: fix to do sanity check with secs_per_zone f2fs: disable f2fs_check_rb_tree_consistence f2fs: introduce and spread verify_blkaddr f2fs: use timespec64 for inode timestamps f2fs: fix to wait on page writeback before updating page f2fs: assign REQ_RAHEAD to bio for ->readpages f2fs: fix a hungtask problem caused by congestion_wait f2fs: Fix uninitialized return in f2fs_ioc_shutdown() f2fs: don't issue discard commands in online discard is on f2fs: fix to propagate return value of scan_nat_page() f2fs: support in-memory inode checksum when checking consistency f2fs: fix error path of fill_super f2fs: relocate readdir_ra configure initialization f2fs: move s_res{u,g}id initialization to default_options() f2fs: don't acquire orphan ino during recovery f2fs: avoid potential deadlock in f2fs_sbi_store f2fs: indicate shutdown f2fs to allow unmount successfully f2fs: keep meta pages in cp_error state f2fs: do checkpoint in kill_sb f2fs: allow wrong configured dio to buffered write f2fs: flush journal nat entries for nat_bits during unmount Change-Id: I8652e88c1a7670fb41ceb53e9dcff3116ccd5b6f Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
2018-09-26ANDROID: restrict store of prefer_idle as booleanWei Wang
It works as boolean so stores like a boolean too. Bug: 116734731 Test: Set stune Change-Id: I0daa3cc1723d009ed5bc2a71fa1c2e3d4ece6a7f Signed-off-by: Wei Wang <wvw@google.com>
2018-09-26Merge 4.4.158 into android-4.4Greg Kroah-Hartman
Changes in 4.4.158 iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register ALSA: msnd: Fix the default sample sizes ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro xfrm: fix 'passing zero to ERR_PTR()' warning gfs2: Special-case rindex for gfs2_grow clk: imx6ul: fix missing of_node_put() kbuild: add .DELETE_ON_ERROR special target dmaengine: pl330: fix irq race with terminate_all MIPS: ath79: fix system restart media: videobuf2-core: check for q->error in vb2_core_qbuf() mtd/maps: fix solutionengine.c printk format warnings fbdev: omapfb: off by one in omapfb_register_client() video: goldfishfb: fix memory leak on driver remove fbdev/via: fix defined but not used warning perf powerpc: Fix callchain ip filtering when return address is in a register fbdev: Distinguish between interlaced and progressive modes ARM: exynos: Clear global variable on init error path perf powerpc: Fix callchain ip filtering powerpc/powernv: opal_put_chars partial write fix MIPS: jz4740: Bump zload address mac80211: restrict delayed tailroom needed decrement xen-netfront: fix queue name setting arm64: dts: qcom: db410c: Fix Bluetooth LED trigger s390/qeth: fix race in used-buffer accounting s390/qeth: reset layer2 attribute on layer switch platform/x86: toshiba_acpi: Fix defined but not used build warnings crypto: sharah - Unregister correct algorithms for SAHARA 3 xen-netfront: fix warn message as irq device name has '/' RDMA/cma: Protect cma dev list with lock pstore: Fix incorrect persistent ram buffer mapping xen/netfront: fix waiting for xenbus state change IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler Tools: hv: Fix a bug in the key delete code misc: hmc6352: fix potential Spectre v1 usb: Don't die twice if PCI xhci host is not responding in resume USB: Add quirk to support DJI CineSSD usb: Avoid use-after-free by flushing endpoints early in usb_set_interface() usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame() USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller USB: net2280: Fix erroneous synchronization change USB: serial: io_ti: fix array underflow in completion handler usb: misc: uss720: Fix two sleep-in-atomic-context bugs USB: yurex: Fix buffer over-read in yurex_write() usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt() cifs: prevent integer overflow in nxt_dir_entry() CIFS: fix wrapping bugs in num_entries() binfmt_elf: Respect error return from `regset->active' audit: fix use-after-free in audit_add_watch mtdchar: fix overflows in adjustment of `count` MIPS: loongson64: cs5536: Fix PCI_OHCI_INT_REG reads ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping parport: sunbpp: fix error return code coresight: Handle errors in finding input/output ports coresight: tpiu: Fix disabling timeouts gpiolib: Mark gpio_suffixes array with __maybe_unused drm/amdkfd: Fix error codes in kfd_get_process rtc: bq4802: add error handling for devm_ioremap ALSA: pcm: Fix snd_interval_refine first/last with open min/max selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress drm/panel: type promotion bug in s6e8aa0_read_mtp_id() pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant USB: serial: ti_usb_3410_5052: fix array underflow in completion handler mei: bus: type promotion bug in mei_nfc_if_version() drivers: net: cpsw: fix segfault in case of bad phy-handle MIPS: VDSO: Match data page cache colouring when D$ aliases Linux 4.4.158 Change-Id: I1e31454733d69774fbb97398fd7756438fb8fa17 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2018-09-26Linux 4.4.158Greg Kroah-Hartman
2018-09-26MIPS: VDSO: Match data page cache colouring when D$ aliasesPaul Burton
commit 0f02cfbc3d9e413d450d8d0fd660077c23f67eff upstream. When a system suffers from dcache aliasing a user program may observe stale VDSO data from an aliased cache line. Notably this can break the expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name suggests, monotonic. In order to ensure that users observe updates to the VDSO data page as intended, align the user mappings of the VDSO data page such that their cache colouring matches that of the virtual address range which the kernel will use to update the data page - typically its unmapped address within kseg0. This ensures that we don't introduce aliasing cache lines for the VDSO data page, and therefore that userland will observe updates without requiring cache invalidation. Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Rene Nielsen <rene.nielsen@microsemi.com> Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Patchwork: https://patchwork.linux-mips.org/patch/20344/ Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drivers: net: cpsw: fix segfault in case of bad phy-handleDavid Rivshin
commit d733f7542ad47cf73e033c90cf55158587e1d060 upstream. If an emac node has a phy-handle property that points to something which is not a phy, then a segmentation fault will occur when the interface is brought up. This is because while phy_connect() will return ERR_PTR() on failure, of_phy_connect() will return NULL. The common error check uses IS_ERR(), and so missed when of_phy_connect() fails. The NULL pointer is then dereferenced. Also, the common error message referenced slave->data->phy_id, which would be empty in the case of phy-handle. Instead, use the name of the device_node as a useful identifier. And in the phy_id case add the error code for completeness. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net> [SZ Lin (林上智): Tweak the patch to use original print function of dev_info()] Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26mei: bus: type promotion bug in mei_nfc_if_version()Dan Carpenter
commit b40b3e9358fbafff6a4ba0f4b9658f6617146f9c upstream. We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable@vger.kernel.org> Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26USB: serial: ti_usb_3410_5052: fix array underflow in completion handlerJohan Hovold
commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream. Similarly to a recently reported bug in io_ti, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliantDouglas Anderson
[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drm/panel: type promotion bug in s6e8aa0_read_mtp_id()Dan Carpenter
[ Upstream commit cd0e0ca69109d025b1a1b6609f70682db62138b0 ] The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca06371 ("drm/panel: add S6E8AA0 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock ↵John Stultz
adjustments are in progress [ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ] In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect. Thus, this patch checks to see if the clock was being adjusted when we fail so that we don't cause false negatives. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Suggested-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ALSA: pcm: Fix snd_interval_refine first/last with open min/maxTimo Wischer
[ Upstream commit ff2d6acdf6f13d9f8fdcd890844c6d7535ac1f10 ] Without this commit the following intervals [x y), (x y) were be replaced to (y-1 y) by snd_interval_refine_last(). This was also done if y-1 is part of the previous interval. With this changes it will be replaced with [y-1 y) in case of y-1 is part of the previous interval. A similar behavior will be used for snd_interval_refine_first(). This commit adapts the changes for alsa-lib of commit 9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if also excluded before") Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26rtc: bq4802: add error handling for devm_ioremapZhouyang Jia
[ Upstream commit 7874b919866ba91bac253fa219d3d4c82bb944df ] When devm_ioremap fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling devm_ioremap. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drm/amdkfd: Fix error codes in kfd_get_processWei Lu
[ Upstream commit e47cb828eb3fca3e8999a0b9aa053dda18552071 ] Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process. This fixes kernel oopses when a child process calls KFD ioctls with a file descriptor inherited from the parent process. Signed-off-by: Wei Lu <wei.lu2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26gpiolib: Mark gpio_suffixes array with __maybe_unusedAndy Shevchenko
[ Upstream commit b23ec59926faf05b0c43680d05671c484e810ac4 ] Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26coresight: tpiu: Fix disabling timeoutsRobin Murphy
[ Upstream commit ccff2dfaceaca4517432f5c149594215fe9098cc ] Probing the TPIU driver under UBSan triggers an out-of-bounds shift warning in coresight_timeout(): ... [ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16 [ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int' ... On closer inspection things are exponentially out of whack because we're passing a bitmask where a bit number should be. Amusingly, it seems that both calls will find their expected values by sheer luck and appear to succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2 (TCPresent) which apparently is usually tied high. Following the examples of other drivers, define separate FOO and FOO_BIT macros for masks vs. indices, and put things right. CC: Robert Walker <robert.walker@arm.com> CC: Mike Leach <mike.leach@linaro.org> CC: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 11595db8e17f ("coresight: Fix disabling of CoreSight TPIU") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26coresight: Handle errors in finding input/output portsSuzuki K Poulose
[ Upstream commit fe470f5f7f684ed15bc49b6183a64237547910ff ] If we fail to find the input / output port for a LINK component while enabling a path, we should fail gracefully rather than assuming port "0". Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26parport: sunbpp: fix error return codeJulia Lawall
[ Upstream commit faa1a47388b33623e4d504c23569188907b039a0 ] Return an error code on failure. Change leading spaces to tab on the first if. Problem found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drm/nouveau: tegra: Detach from ARM DMA/IOMMU mappingThierry Reding
[ Upstream commit b59fb482b52269977ee5de205308e5b236a03917 ] Depending on the kernel configuration, early ARM architecture setup code may have attached the GPU to a DMA/IOMMU mapping that transparently uses the IOMMU to back the DMA API. Tegra requires special handling for IOMMU backed buffers (a special bit in the GPU's MMU page tables indicates the memory path to take: via the SMMU or directly to the memory controller). Transparently backing DMA memory with an IOMMU prevents Nouveau from properly handling such memory accesses and causes memory access faults. As a side-note: buffers other than those allocated in instance memory don't need to be physically contiguous from the GPU's perspective since the GPU can map them into contiguous buffers using its own MMU. Mapping these buffers through the IOMMU is unnecessary and will even lead to performance degradation because of the additional translation. One exception to this are compressible buffers which need large pages. In order to enable these large pages, multiple small pages will have to be combined into one large (I/O virtually contiguous) mapping via the IOMMU. However, that is a topic outside the scope of this fix and isn't currently supported. An implementation will want to explicitly create these large pages in the Nouveau driver, so detaching from a DMA/IOMMU mapping would still be required. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ARM: hisi: check of_iomap and fix missing of_node_putNicholas Mc Guire
[ Upstream commit 81646a3d39ef14749301374a3a0b8311384cd412 ] of_find_compatible_node() returns a device node with refcount incremented and thus needs an explicit of_node_put(). Further relying on an unchecked of_iomap() which can return NULL is problematic here, after all ctrl_base is critical enough for hix5hd2_set_cpu() to call BUG() if not available so a check seems mandated here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> 0002 Fixes: commit 06cc5c1d4d73 ("ARM: hisi: enable hix5hd2 SoC") Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-13 13:21:23 +0000