summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-15Input: hgpk - detect simple mode overflowsDaniel Drake
Based on work by Paul Fox. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: mac mouse emulation - add lockingDmitry Torokhov
We need to add appropriate locking when toggling mac mouse emulation on and off to ensure that input device and handler are in consistent state. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: hgpk - extend jumpiness detectionDaniel Drake
In addition to forcing recalibrations upon detection of cursor jumps (and performing them quicker than before), detect and discard errant 'jump' packets caused by a firmware bug, which are then repeated with each one being approximately half the delta of the one previously (as if it is averaging out) Based on original work by Paul Fox. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: hgpk - rework spew detectionDaniel Drake
The old implementation of spew detection simply tracked the overall position delta of the cursor over every 100 packets. We found that this causes occasional false positives in spew detection, and also that the conditions of the spewy packets are perhaps more fixed than we once thought. Rework the spew detection to look for packets of specific small delta, and only recalibrating if the overall movement delta stays within expected bounds. Also discard duplicate packets in the advanced mode, which appear to be very common. If we don't, the spew detection kicks in far too early. If we get a large spew of duplicates, request a recalibration straight up. Based on earlier work by Paul Fox. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: hgpk - support GlideSensor and PenTablet modesDaniel Drake
Add a "hgpk_mode" sysfs attribute that allows selection between 3 options: Mouse (the existing option), GlideSensor and PenTablet. GlideSensor is an enhanced protocol for the regular touchpad mode that additionally reports pressure and uses absolute coordinates. We suspect that it may be more reliable than mouse mode in some environments. PenTablet mode puts the touchpad into resistive mode, you must then use a stylus as an input. We suspect this is the most reliable way to drive the touchpad. The GlideSensor and PenTablet devices expose themselves with the intention of being combined with the synaptics X11 input driver. Based on earlier work by Paul Fox. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: pcf_keypad - convert to dev_op_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: xpad - remove useless check in xpad_removeDmitry Torokhov
ixpad can never be NULL here; if it is NULL we would not have been bound to the interface and then why would we be called? Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: xpad - fix resource reclaim in xpad_probe error pathAxel Lin
Properly free the resources in error path by the reverse order of resource allocation. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: xpad - fix a memory leakAxel Lin
In xpad_led_disconnect(), what we really want is to kfree(xpad_led). In xpad_disconnect(), add a missing kfree(xpad->bdata) to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: xpad - return proper error in error pathAxel Lin
In current implementation, xpad_probe return 0 when usb_alloc_urb failed for xpad->bulk_out and kzalloc failed for xpad->bdata. This patch removes the initialization for error variable, assign the error code at the place the error happens instead. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: do not pass injected events back to the originating handlerDmitry Torokhov
Sometimes input handlers (as opposed to input devices) have a need to inject (or re-inject) events back into input core. For example sysrq filter may want to inject previously suppressed Alt-SysRq so that user can take a screen print. In this case we do not want to pass such events back to the same same handler that injected them to avoid loops. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: pcf8574_keypad - fix error handling in pcf8574_kp_probeDan Carpenter
It is not allowed to call input_free_device() after calling input_unregister_device() because input devices are refcounted and unregister will free the device if we were holding he last referenc. The preferred style in input/ is to make input_register_device() the last function in the probe which can fail. That way we don't need to call input_unregister_device(). Also do not need to call input_set_drvdata() as nothing in the driver uses the data. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-10Input: acecad - fix a memory leak in usb_acecad_probe error pathAxel Lin
Add a missing usb_free_urb() in usb_acecad_probe() error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: atkbd - add 'terminal' parameter for IBM Terminal keyboardsBenjamin LaHaise
Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate using a protocol similar, but not identical to the AT keyboard protocol. (Models known to be like this include 6110344, 6110668, 1390876, 1386887, and possibly others.) When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they can be connected to a standard PC, with three caveats: a) They can only use scancode set 3; requests to use anything else are quietly ignored. b) The AT Command to request Make, Break and Repeat codes is not properly interpreted. c) The top function keys on a 122 key keyboard, and the arrow/edit keys in the middle of the board send non-standard scancodes. C) is easily taken care of in userspace, by use of setkeycodes B) can be taken care of by a userspace hack (that makes the kernel complain in dmesg) A) is fixable in theory, but on the keyboard i tested on (6110668), it seems to be detected unoverridably as Set 2, causing userspace oddities that make it harder to fix C). Enclosed is a small patch to the kernel that fixes A) and B) in the kernel, making it much easier to fix C) in userspace. It adds a single kernel command line parameter that overrides the detection that sets these boards as set 2, and instead of sending the Make-break-repeat command to the keyboard, it sends the make-break command, which is properly recognized by these keyboards. Software level key repeating seems to make up for the lack of hardware repeat codes perfectly. Without manually setting the command line parameter (tentatively named atkbd.terminal), this code has no effect, and the driver works exactly as before. See also: http://www.seasip.info/VintagePC/ibm_1390876.html http://www.seasip.info/VintagePC/ibm_6110344.html http://geekhack.org/showwiki.php?title=Island:7306 Signed-off-by: Erika Quinn <erikas.aubade@gmail.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: i8042 - add Sony VAIOs to MUX blacklistJesse Barnes
The Sony VPCZ1 doesn't support active multiplexing and trying to enable it causes keyboard to stop working. Since most (all?) VAIOs do not have external PS/2 ports nor they implement active multiplexing properly, and trying to enable MUX usually messes up keyboard/touchpad, let's simply disable MUX probing based on board name (VAIO). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03kgdboc: reset input devices (keyboards) when exiting debuggerDmitry Torokhov
Use the newly exported input_reset_device() call to reset LED state and mark all keys/buttons as released on all keyboard-like devices when exiting the debugger. [jason.wessel@windriver.com: fix compile without keyboard input driver] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: export input_reset_device() for use in KGDBDmitry Torokhov
KGDB, much like the resume process, needs to be able to mark all keys that were pressed at the time we dropped into the debuggers as "released", since it is unlikely that the keys stay pressed for the entire duration of the debug session. Also we need to make sure that input_reset_device() and input_dev_suspend() only attempt to change state of currenlt opened devices since closed devices may not be ready to accept IO requests. Tested-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: adp5588-keys - unify common header definesMichael Hennerich
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-01Linux 2.6.37-rc1Linus Torvalds
2010-11-01Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds
* 'for-linus' of git://www.jni.nu/cris: CRIS: Add paths for CRISv10 serial driver CRIS: Fix RS485 delay handling. Add missing "struct" to in sizeof.
2010-11-01Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
2010-11-01CRIS: Add paths for CRISv10 serial driverJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-11-01spi/pl022: fix erroneous platform data in U300Linus Walleij
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-31Input: ir-keytable - fix uninitialized variable warningDmitry Torokhov
We were forgetting to set up proper return value in success path causing ir_getkeycode() to fail intermittently: drivers/media/IR/ir-keytable.c: In function 'ir_getkeycode': drivers/media/IR/ir-keytable.c:363: warning: 'retval' may be used uninitialized in this function Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
2010-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
2010-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
2010-10-31Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
2010-10-31i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllersDavid Woodhouse
These are the extra 'Integrated Device Function' SMBus controllers found on the Patsburg chipset. Mention the absence of slave mode support. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Handle multiple instances instead of keeping global stateDavid Woodhouse
It's poor form to keep driver state in global variables rather than per-instance. It never really mattered in practice when there was only one controller on the chipset, but the latest chipsets do have more than one controller, so now we care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Add Intel Patsburg device IDSeth Heasley
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c: Drop unused I2C_CLASS_TV flagsJean Delvare
There are no users left for I2C_CLASS_TV_ANALOG and I2C_CLASS_TV_DIGITAL, so we can get rid of them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31Input: appletouch - remove extra KERN_DEBUG use from dprintkJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-31locks: remove fl_copy_lock lock_manager operationChristoph Hellwig
This one was only used for a nasty hack in nfsd, which has recently been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31locks: let the caller free file_lock on ->setlease failureChristoph Hellwig
The caller allocated it, the caller should free it. The only issue so far is that we could change the flp pointer even on an error return if the fl_change callback failed. But we can simply move the flp assignment after the fl_change invocation, as the callers don't care about the flp return value if the setlease call failed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31initramfs: Fix initramfs size for 32-bit archesGeert Uytterhoeven
Commit ffe8018c3424 ("initramfs: fix initramfs size calculation") broke 32-bit big-endian arches like (on ARAnyM): VFS: Cannot open root device "hda1" or unknown-block(3,1) Please append a correct "root=" boot option; here are the available partitions: fe80 1059408 nfhd8 (driver?) fe81 921600 nfhd8p1 00000000-0000-0000-0000-000000000nfhd8p1 fe82 137807 nfhd8p2 00000000-0000-0000-0000-000000000nfhd8p2 0200 3280 fd0 (driver?) 0201 3280 fd1 (driver?) 0300 1059408 hda driver: ide-gd 0301 921600 hda1 00000000-0000-0000-0000-000000000hda1 0302 137807 hda2 00000000-0000-0000-0000-000000000hda2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1) As pointed out by Kerstin Jonsson <kerstin.jonsson@ericsson.com>, this is due to CONFIG_32BIT not being defined, so the initramfs size field is done as a 64-bit quad. On little-endian (like x86) this doesn matter, but on a big-endian machine the 32-bit reads will see the (zero) high bits. Only mips, s390, and score set CONFIG_32BIT for 32-bit builds, so fix it for all other 32-bit arches by inverting the logic and testing for CONFIG_64BIT, which should be defined on all 64-bit arches. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [ I think we should just make it "u64" on all architectures and get rid of the whole #ifdef CONFIG_xxBIT - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: isdn: mISDN: socket: fix information leak to userland netdev: can: Change mail address of Hans J. Koch pcnet_cs: add new_id net: Truncate recvfrom and sendto length to INT_MAX. RDS: Let rds_message_alloc_sgs() return NULL RDS: Copy rds_iovecs into kernel memory instead of rereading from userspace RDS: Clean up error handling in rds_cmsg_rdma_args RDS: Return -EINVAL if rds_rdma_pages returns an error net: fix rds_iovec page count overflow can: pch_can: fix section mismatch warning by using a whitelisted name can: pch_can: fix sparse warning netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probe ip_gre: fix fallback tunnel setup vmxnet: trivial annotation of protocol constant vmxnet3: remove unnecessary byteswapping in BAR writing macros ipv6/udp: report SndbufErrors and RcvbufErrors phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr
2010-10-30nfsd4: initialize delegation pointer to leaseJ. Bruce Fields
The NFSv4 server was initializing the dp->dl_flock pointer by the somewhat ridiculous method of a locks_copy_lock callback. Now that setlease uses the passed-in lock instead of doing a copy, dl_flock no longer gets set, resulting in the lock leaking on delegation release, and later possible hangs (among other problems). So, initialize dl_flock and get rid of the callback. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: fix setlease methods to free passed-in lockJ. Bruce Fields
We modified setlease to require the caller to allocate the new lease in the case of creating a new lease, but forgot to fix up the filesystem methods. Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: fix leaks on setlease errorsJ. Bruce Fields
We're depending on setlease to free the passed-in lease on failure. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: prevent ENOMEM on lease unlockJ. Bruce Fields
Removing a lock shouldn't require any allocations; a failure due to ENOMEM leaves the caller with a choice between retrying or giving up and leaking an unused lease. Next we should split the other lease calls into add and delete cases. I wanted to start with just the bugfix. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30drivers/media/IR/ir-keytable.c: fix binary searchDavid Härdeman
The input-large-scancode patches changed the binary search in drivers/media/IR/ir-keytable.c to use unsigned integers, but signed integers are actually necessary for the algorithm to work. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30isdn: mISDN: socket: fix information leak to userlandKulikov Vasiliy
Structure mISDN_devinfo is copied to userland with the field "name" that has the last elements unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30netdev: can: Change mail address of Hans J. KochHans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add new_id: "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30net: Truncate recvfrom and sendto length to INT_MAX.Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Let rds_message_alloc_sgs() return NULLAndy Grover
Even with the previous fix, we still are reading the iovecs once to determine SGs needed, and then again later on. Preallocating space for sg lists as part of rds_message seemed like a good idea but it might be better to not do this. While working to redo that code, this patch attempts to protect against userspace rewriting the rds_iovec array between the first and second accesses. The consequences of this would be either a too-small or too-large sg list array. Too large is not an issue. This patch changes all callers of message_alloc_sgs to handle running out of preallocated sgs, and fail gracefully. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Copy rds_iovecs into kernel memory instead of rereading from userspaceAndy Grover
Change rds_rdma_pages to take a passed-in rds_iovec array instead of doing copy_from_user itself. Change rds_cmsg_rdma_args to copy rds_iovec array once only. This eliminates the possibility of userspace changing it after our sanity checks. Implement stack-based storage for small numbers of iovecs, based on net/socket.c, to save an alloc in the extremely common case. Although this patch reduces iovec copies in cmsg_rdma_args to 1, we still do another one in rds_rdma_extra_size. Getting rid of that one will be trickier, so it'll be a separate patch. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Clean up error handling in rds_cmsg_rdma_argsAndy Grover
We don't need to set ret = 0 at the end -- it's initialized to 0. Also, don't increment s_send_rdma stat if we're exiting with an error. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Return -EINVAL if rds_rdma_pages returns an errorAndy Grover
rds_cmsg_rdma_args would still return success even if rds_rdma_pages returned an error (or overflowed). Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-26 20:41:36 +0000