summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-01scsi: don't add scsi_device if its already visibleSubhash Jadavani
If LLD has added scsi device (by calling scsi_add_device) before scheduling async scsi_scan_host then scsi_finish_async_scan() will end up calling scsi_sysfs_add_sdev for scsi device which was already added by LLD. This patch fixes this issue by skipping the call to scsi_sysfs_add_sdev() if it's already visible to rest of the kernel. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-01scsi: fix the type for well known LUsSubhash Jadavani
Some devices may respond with wrong type for well-known logical units. This patch forces well-known type for devices which doesn't report it correct. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30scsi_debug: deadlock between completions and surprise module removalDouglas Gilbert
A deadlock has been reported when the completion of SCSI commands (simulated by a timer) was surprised by a module removal. This patch removes one half of the offending locks around timer deletions. This fix is applied both to stop_all_queued() which is were the deadlock was discovered and stop_queued_cmnd() which has very similar logic. This patch should be applied both to the lk 3.17 tree and Christoph's drivers-for-3.18 tree. Tested-and-reported-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30be2iscsi: check ip buffer before copyingMike Christie
Dan Carpenter found a issue where be2iscsi would copy the ip from userspace to the driver buffer before checking the len of the data being copied: http://marc.info/?l=linux-scsi&m=140982651504251&w=2 This patch just has us only copy what we the driver buffer can support. Cc: <stable@vger.kernel.org> Tested-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30iscsi_tcp: export port being usedMike Christie
This just has iscsi_tcp support ISCSI_PARAM_LOCAL_PORT which exports the local port being used by the iscsi connection. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30be2iscsi : Bump the driver versionJohn Soni Jose
Bump the driver version Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30be2iscsi : Fix kernel panic during reboot/shutdownJohn Soni Jose
In the reboot/shutdown path, workqueue was destroyed after the adapter resource were freed. The task associated with workqueue was getting executed after resources were freed. This lead to kernel panic. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30libfc: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat
The uses of "rcu_assign_pointer()" are NULLing out the pointers. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30fcoe: extend ethtool to FC port speed mappingChris Leech
add support for 20 Gbit and 40 Gbit links Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-26ipr: fix compile failureChristoph Hellwig
Fix a typo in the IPR_IOASC_HW_CMD_FAILED declaration. Based on a patch from Wen Xiong <wenxiong@linux.vnet.ibm.com>. Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add memory barrier before ringing doorbell.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add flags for tracing the target commands.Saurav Kashyap
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix hang due to cmd_kref not decrementingQuinn Tran
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Do not send SS_RESIDUAL_UNDER with SAM_STAT_BUSYHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add support for QFull throttling and Term Exchange retryQuinn Tran
Through the qla target code, the qlt_send_term_exchange() routine is used in various different places to cleanup an exchange. For the case of IOCB request queue is full, the exchange is left unhandled/ dangling. Existing code does not have re-try logic to cleanup the exchange. This patch add retry logic to cleanup the exchange before letting new commands through. For the case of FW running out of exchanges, driver need to reply SAM_STAT_BUSY to the initiators. This patch add a pending queue for the busy reply in case IOCB queue is unable to handle the cmd. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Increase the request queue size to 8K for ISP2031Saurav Kashyap
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Host reset handling in ABTS path.Arun Easi
ABTS path takes path similar to regular task management, but reset_count was not initialized when allocating mcmd causing the response to get dropped in qlt_xmit_tm_rsp. Fix this by initializing reset_count correctly. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Handle chip reset in target mode.Arun Easi
A chip reset can occur after driver submits command to the stack. Abort command processing if a chip reset has occurred or in progress when you get a follow up for a command. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add Host reset handling in target mode.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: fix crash due to task mgmt cmd typeHimanshu Madhani
tcm_qla2xxx_get_task_tag incorrectly assume command is qla_tgt_cmd. Add check to see if it's a scsi cmd or task mgmt command. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add counter for messageSaurav Kashyap
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Enable SLER conditionally in target mode.Arun Easi
Sequence level error recovery (aka FC Tape) is not really required for disk devices. On heavily loaded system, with slow turn around, a bunch of status enquiries using REC puts additional burden to the target, so just turn off SLER by default. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Remove verbose messages in target mode.Arun Easi
Turning logging bits for target mode ON dumps quite a lot verbose messages, remove those and change some of the IO path logging to use IO bits. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Increase room in request queue for sending priority packetsHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Use correct offset to req-q-out for reserve calculationArun Easi
Cc: <stable@vger.kernel.org> Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: fix kernel NULL pointer accessHimanshu Madhani
This patch is to fix regression added by commit id 51a07f84649d2be206c4c2ad9a612956db0c2f8c. When allocating memory for new session original patch does not assign vha to op->vha resulting into NULL pointer access during qlt_create_sess_from_atio(). Cc: <stable@vger.kernel.org> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix sparse warnings in tcm_qla2xxx.cHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Update the driver version to 8.07.00.16-k.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix sparse warning in qla_iocb.c file.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Move warning message to debug level.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fail adapter initialization on load ram failure.Chad Dupuis
If we fail to load one of the segments of firmware fail the operation instead of trying to continue which will lead to a system crash since the pointers to the next segment will not be updated correctly. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Disable PCI device in shutdown handler.Chad Dupuis
Disable the PCI device during shutdown to prevent any races with other PCI code such as the AER handling code. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Mark port lost when we receive an RSCN for it.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Restore WWPN in case of Loop Dead.Himanshu Madhani
For FA-WWPN capable device, ISP2031 and ISP27XX, when loop dead is detected by a driver, restore WWPN from NVRAM. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Honor FCP_RSP retry delay timer field.Chad Dupuis
Parse the retry delay timer field from the FCP response data and if: - It is not zero - The SCSI status is busy or queue full return SCSI_MLQUEUE_TARGET_BUSY for the number of milliseconds specified in the retry delay timer field. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add missing ISP27xx checks to optrom code.Alex Vechersky
Signed-off-by: Alex Vechersky <alex.vechersky@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Force use of mailbox interface for flash access commands for ISP27xx.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Free sysfs attributes for ISP27xx.Nigel Kirkland
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Disable laser for ISP2031 while unloading driver.Himanshu Madhani
Nameserver data on FC switch is not refreshed when qla2xxx driver is unloaded. Disabling laser for ISP2031 will force FC switch to rescan ports and clear fdmi entries from Nameserver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Enable diagnostic port using NVRAM parameters.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Declaration error cause stack corruption.Quinn Tran
Declaration error of mb array in qla2x00_iidma_fcport cause data to be written beyond the array. This ends up causing stack corruption. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add fix in driver unload for pending activity.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Unload of qla2xxx driver crashes the machine.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Allow user to change ql2xfdmienable value.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix driver version string message.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add diagnostic port functionality.Joe Carnuccio
Add support for the D-port (diagnostic port) fabric switch feature. (Fabric Switch initiates loopback style port testing) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add FA-WWN functionality.Joe Carnuccio
Add support for the FA-WWN (fabric assigned wwn) fabric switch feature. (Fabric Assigned World Wide Port Name) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add FDMI-2 functionality.Himanshu Madhani
Add support for the FDMI-2 fabric switch feature. Since FDMI-2 uses code from FDMI-1, some of the existing code needed to be repaired to prevent fields from being overflowed. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISPFx00 unexpected resets during adapter boot sequence.Jan Kulich
Signed-off-by: Jan Kulich <jan.kulich@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Incorrect linked list semantic in qlafx00_get_fcport().Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-06 04:34:01 +0000