summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-10i40e: call clear_pxe after adminq is initializedShannon Nelson
In the latest firmware the clear_pxe_mode function will use the AdminQ request, so call this after AdminQ is set up rather than relying on i40e_pf_reset() to clear the PXE mode. Change-ID: Ice8cba2e9cbc3c7bde0a0bcf8eaf5009abef040b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: clear qtx_head before enabling Tx queueShannon Nelson
Make sure the "new" qtx_head[q] register is cleared before enabling the Tx queue. Change-ID: I0c7a12815e343a5ae68807af172a35d6c6857935 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: adjust ITR max and min valuesShannon Nelson
Set the ITR max and min values to match the hardware max value and the recommended min value. These values are shifted right one bit because the register counts in 2 usec units, so leave a comment to explain. Change-ID: I289c27955cf6c566a6d21b95c3110b88cbb15dad Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: check for possible incorrect ipv6 checksumShannon Nelson
If the IPV6EXADD bit is set in the Rx descriptor status, there was an optional extension header with an alternate IP address detected. The HW checksum offload doesn't handle the alternate IP address correctly so likely comes up with the wrong answer. Thus, if the bit is set we ignore the checksum offload value. Change-ID: I70ff8d38cdcddccf44107691cae13d0c07c284c8 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: allow VF to remove any MAC filterMitch Williams
If you use ip to change the MAC address of a VF while the VF driver is loaded, closing the VF interface or unloading the VF driver will cause the VF driver to remove the MAC filter for its original (now invalid) MAC address. This would cause the PF driver to kick an error message to the log, and back to the VF driver. Since the VF driver has not really done anything naughty, let's not punish it. Don't check for MAC address overrides on the delete operation, just make sure it's a valid address. This keeps us from spamming the log with confusing errors. Change-ID: I1f051bd4014e50855457d928c9ee8b0766981b2f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: do not bail when disabling if Tx queue disable failsAnjali Singhai Jain
Fix a bug where the driver was erroneously exiting the driver unload path if one part of the unload failed. Instead of the original way the driver should always continue when disabling and be sure to disable all queues. Change-ID: Ib8c81c596bc87c31d8e9ca97ebf871168475279d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: Setting queue count to 1 using ethtool is validAnjali Singhai Jain
Fix a bug where ethtool set-channels would return failure when configuring only one Rx queue. Change-ID: Id833c48c17d71e352b30f3249f6acf9e7aaec57e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: Cleanup Doxygen warningsJeff Kirsher
These changes make Doxygen/kdoc work correctly without warnings. Change-ID: I2941f38860be805ff7548d84dae35754c83f1d62 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
2014-01-10i40e: fix long linesMitch Williams
Avoid over-length lines in order to appease checkpatch. Change-ID: I63820a710acf798f49d2f85c610228711af84f72 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: Bump versionCatherine Sullivan
Update driver version to 0.3.27-k Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: Update the Current NVM version Low valueAnjali Singhai Jain
The current driver will warn the user if the NVM version is out of date, this raises the bar to a newer version. Change-ID: I5ec21d8efa4e7c3fdacb56f85d310bb2229b1483 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: drop unused macrosJesse Brandeburg
A previous commit removed any need for these macros, so remove them too. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-10i40e: use assignment instead of memcpyMitch Williams
These instances were found by coccinelle/spatch, and can use struct assignment instead of memcpy. Change-ID: Idc23c3599241bf8a658bda18c80417af3fbfee66 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09xen-netback: stop vif thread spinning if frontend is unresponsivePaul Durrant
The recent patch to improve guest receive side flow control (ca2f09f2) had a slight flaw in the wait condition for the vif thread in that any remaining skbs in the guest receive side netback internal queue would prevent the thread from sleeping. An unresponsive frontend can lead to a permanently non-empty internal queue and thus the thread will spin. In this case the thread should really sleep until the frontend becomes responsive again. This patch adds an extra flag to the vif which is set if the shared ring is full and cleared when skbs are drained into the shared ring. Thus, if the thread runs, finds the shared ring full and can make no progress the flag remains set. If the flag remains set then the thread will sleep, regardless of a non-empty queue, until the next event from the frontend. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09cxgb4: Changed FW check version to match FW binary versionHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09irda: sh_sir: use devm_request_irq()Kuninori Morimoto
Huqiu reported current sh_sir driver doesn't call free_irq() in spite of using request_irq(). This patch replaces request_irq() into devm_request_irq() to solve this issue Reported-by: Huqiu Liu<huqiuliu@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09irda: sh_irda: use devm_request_irq()Kuninori Morimoto
Huqiu reported current sh_irda driver doesn't call free_irq() in spite of using request_irq(). This patch replaces request_irq() into devm_request_irq() to solve this issue Reported-by: Huqiu Liu<huqiuliu@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09irda: fixup SH_SIR position on KconfigKuninori Morimoto
SH_SIR is not Dongle Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables Pablo Neira Ayuso says: ==================== nf_tables updates for net-next The following patchset contains the following nf_tables updates, mostly updates from Patrick McHardy, they are: * Add the "inet" table and filter chain type for this new netfilter family: NFPROTO_INET. This special table/chain allows IPv4 and IPv6 rules, this should help to simplify the burden in the administration of dual stack firewalls. This also includes several patches to prepare the infrastructure for this new table and a new meta extension to match the layer 3 and 4 protocol numbers, from Patrick McHardy. * Load both IPv4 and IPv6 conntrack modules in nft_ct if the rule is used in NFPROTO_INET, as we don't certainly know which one would be used, also from Patrick McHardy. * Do not allow to delete a table that contains sets, otherwise these sets become orphan, from Patrick McHardy. * Hold a reference to the corresponding nf_tables family module when creating a table of that family type, to avoid the module deletion when in use, from Patrick McHardy. * Update chain counters before setting the chain policy to ensure that we don't leave the chain in inconsistent state in case of errors (aka. restore chain atomicity). This also fixes a possible leak if it fails to allocate the chain counters if no counters are passed to be restored, from Patrick McHardy. * Don't check for overflows in the table counter if we are just renaming a chain, from Patrick McHardy. * Replay the netlink request after dropping the nfnl lock to load the module that supports provides a chain type, from Patrick. * Fix chain type module references, from Patrick. * Several cleanups, function renames, constification and code refactorizations also from Patrick McHardy. * Add support to set the connmark, this can be used to set it based on the meta mark (similar feature to -j CONNMARK --restore), from Kristian Evensen. * A couple of fixes to the recently added meta/set support and nft_reject, and fix missing chain type unregistration if we fail to register our the family table/filter chain type, from myself. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09netfilter: nf_tables: fix error path in the init functionsPablo Neira Ayuso
We have to unregister chain type if this fails to register netns. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e only. Anjali provides a fix where interrupts were not being re-enabled on ICR0 even though they were auto masked by hardware. Then provides a fix to cleanup RSS initialization because it was doing some extra work, so remove the extra work and any bugs it created when managing number of queues. Since hardware requires a full packet template to be pointed to when adding hardware flow filters, add the template and use it for programming filters. Jesse provides a fix to replace the use of driver specific defines with kernel ETH_ALEN defines. Then disables packet split because with the use of GRO, we do not need the extra bus overhead. Fixes spelling error in code comment. Kamil provides a fix for the driver where the hardware expects the MAC address in a very specific format and the driver was filing the data incorrectly. Mitch provides a fix to resolve a panic on reset by adding checks to VSI->rx_rings. Then shortens alloc_rx_buff_failed and alloc_rx_page_failed variables since both part of an RX specific structure so just remove the _rx part of the name. Then fixes badly formatted lines, long lines and mis-formatted lines. Shannon provides a fix to call AQ to release any reservation held by this PF on the NVM resource lock on startup, in order to clear anything that might have been left over from a previous run. Then removes interrupt on AQ error since nearly everything we do is synchronous, using the interrupt-on-error bit is unnecessary and causing unneeded interrupts. Adds code to handle the ability to send messages among the physical function interfaces by the admin queue. Catherine sets the MFP flag earlier in software init and uses that flag to decide if other hardware work-arounds are required which turns off flow director in MFP mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09ip_tunnel: fix sparse non static symbol warningWei Yongjun
Fixes the following sparse warning: net/ipv4/ip_tunnel.c:116:18: warning: symbol 'tunnel_dst_check' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09openvswitch: Use kmem_cache_free() instead of kfree()Wei Yongjun
memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: e298e5057006 ('openvswitch: Per cpu flow stats.') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09netfilter: nf_tables: rename nft_do_chain_pktinfo() to nft_do_chain()Patrick McHardy
We don't encode argument types into function names and since besides nft_do_chain() there are only AF-specific versions, there is no risk of confusion. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: prohibit deletion of a table with existing setsPatrick McHardy
We currently leak the set memory when deleting a table that still has sets in it. Return EBUSY when attempting to delete a table with sets. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: take AF module reference when creating a tablePatrick McHardy
The table refers to data of the AF module, so we need to make sure the module isn't unloaded while the table exists. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: perform flags validation before table allocationPatrick McHardy
Simplifies error handling. Additionally use the correct type u32 for the host byte order flags value. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: minor nf_chain_type cleanupsPatrick McHardy
Minor nf_chain_type cleanups: - reorder struct to plug a hoe - rename struct module member to "owner" for consistency - rename nf_hookfn array to "hooks" for consistency - reorder initializers for better readability Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: constify chain type definitions and pointersPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: replay request after dropping locks to load chain typePatrick McHardy
To avoid races, we need to replay to request after dropping the nfnl_mutex to auto-load the chain type module. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: add missing module references to chain typesPatrick McHardy
In some cases we neither take a reference to the AF info nor to the chain type, allowing the module to be unloaded while in use. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: fix chain type module reference handlingPatrick McHardy
The chain type module reference handling makes no sense at all: we take a reference immediately when the module is registered, preventing the module from ever being unloaded. Fix by taking a reference when we're actually creating a chain of the chain type and release the reference when destroying the chain. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: fix check for table overflowPatrick McHardy
The table use counter is only increased for new chains, so move the check to the correct position. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: restore chain change atomicityPatrick McHardy
Chain counter validation is performed after the chain policy has potentially been changed. Move counter validation/setting before changing of the chain policy to fix this. Additionally fix a memory leak if chain counter allocation fails for new chains, remove an unnecessary free_percpu() and move counter allocation for new chains Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nf_tables: split chain policy validation from actually setting itPatrick McHardy
Currently nf_tables_newchain() atomicity is broken because of having validation of some netlink attributes performed after changing attributes of the chain. The chain policy is (currently) fine, but split it up as preparation for the following fixes and to avoid future mistakes. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nft_meta: fix lack of validation of the input registerPablo Neira Ayuso
We have to validate that the input register is in the range of allowed registers, otherwise we can take a incorrect register value as input that may lead us to a crash. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09netfilter: nft_ct: Add support to set the connmarkKristian Evensen
This patch adds kernel support for setting properties of tracked connections. Currently, only connmark is supported. One use-case for this feature is to provide the same functionality as -j CONNMARK --save-mark in iptables. Some restructuring was needed to implement the set op. The new structure follows that of nft_meta. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-01-09i40e: Turn flow director off in MFP modeCatherine Sullivan
The driver needs to set the MFP flag earlier in i40e_sw_init and then can use that flag to decide if other hardware work-arouds are required. Change-ID: Ib17ad1e3485f57b28845ab4722294a99f203bd48 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: Add a dummy packet templateJesse Brandeburg
The hardware requires a full packet template to be pointed to when adding hardware flow filters. This patch adds the template and uses it for programming filters. Change-ID: I09db9f4ab0207ca9c520ae36596d74e1a0663ae5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: fix spelling errorsJesse Brandeburg
This patch does s/rebuid/rebuild/. Change-ID: I77ff0c26db3d23ca5dc971b82d71b4ed8c6bcc14 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: trivial: formatting and checkpatch fixesMitch Williams
Fix some badly formatted lines, long lines and a mis-formatted else. Change-ID: Iac2eef064ae27c55a0c3d9c15c525bf8fed8ab6f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: shorten wordy fieldsMitch Williams
The alloc_rx_buff_failed and alloc_rx_page_failed variables are both part of an rx specific structure so just remove the _rx part of the name. No functional changes. Change-ID: Icffa2f5d13c6f2b1e09cf45b9472b83c9dae8fc6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: accept pf to pf adminq messagesShannon Nelson
The admin queue can be used to send messages among the physical function interfaces. This adds the code to handle that case. Change-ID: I0700fcc47e41433131a381f0eb72fc7b01b6bd87 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: remove interrupt on AQ errorShannon Nelson
Since nearly everything we do is synchronous, using the interrupt-on-error bit is unnecessary and causing unneeded interrupts. If anyone wants to use the bit they can turn it on in individual AQ requests using the cmd_details parameter. Change-ID: I4690a9c561d3e0836aeadb4f88f8a8702b1d1366 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: release NVM resource reservation on startupShannon Nelson
Call AQ to release any reservation held by this PF on the NVM resource lock on startup, in order to clear anything that might have been left over from a previous run. The lock is only cleared by the requestor calling for it to be cleared, on power-on, or firmware reset. This should help limit the need for rebooting a customer machine if something goes wrong on a firmware update or some other action. Change-ID: I8c8473e601d4ef512dda7baa77a6e75f2e5fea49 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: Cleanup reconfig rss pathAnjali Singhai Jain
RSS initialization was doing some extra work, remove the extra work and any bugs it created when managing number of queues. Change-ID: Iea75b04a70d73ce76947b6a177ce89ab4899d4c6 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: disable packet splitJesse Brandeburg
The driver and hardware support splitting packets on headers but with the use of GRO we don't need the extra bus overhead, so make this driver more like igb and ixgbe and disable packet split. Change-ID: Id42f2c3736baa9d5bdfe1f72d64226e7d8ebd737 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: add a comment on barrier and fix panic on resetGreg Rose
The memory barrier used in maybe_stop_tx can use a comment. Also add checks to VSI->rx_rings to ensure a kernel panic is not induced. Change-ID: I48cc1bf1d6cf301818155b737edeef77c0d790c7 Change-ID: I1363a8445fbf521a26267849966296ed55f43ad8 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: Fix MAC format in Write MAC address AQ cmdKamil Krawczyk
The MAC address format expected by the hardware is in a very specific format, and the driver was filling in the data incorrectly. Change-ID: I7bc66505ef459ee347dd3bda68051004c141c689 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: Fix GPL headerGreg Rose
The GPL header included in each file in the i40e driver doesn't need to include the "this program" text since this driver is already part of the larger kernel. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 01:25:21 +0000