summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-03UBI: Add fastmap support to the WL sub-systemRichard Weinberger
To make fastmap possible the WL sub-system needs some changes. Mostly to support fastmaps pools. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap stuff to attach.cRichard Weinberger
- Export compare_lebs() as fastmap needs this function. - Implement fastmap scan logic. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Wire-up ->fm_semRichard Weinberger
Fastmap uses ->fm_sem to stop EBA changes while writing a new fastmap. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap bits to build.cRichard Weinberger
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add self_check_eba()Richard Weinberger
self_check_eba() compares two ubi_attach_info objects. Fastmap uses this function for self checks. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Export next_sqnum()Richard Weinberger
Fastmap needs next_sqnum(), rename it to ubi_next_sqnum() and make it non-static. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap stuff to ubi.hRichard Weinberger
This patch adds fastmap specific data structures to ubi.h. It moves also struct ubi_work to ubi.h as it is now needed for more than one c file. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap on-flash data structuresRichard Weinberger
Add the on-flash data structures neeed by fastmap to ubi-media.h Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26UBI: fix trivial typo 'it' => 'is'Brian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26UBI: load after mtd device driversJiang Lu
Use 'late_initcall()' in UBI to make sure it initializes after MTD drivers. Signed-off-by: Jiang Lu <lu.jiang@windriver.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print lessArtem Bityutskiy
UBI currently prints a lot of information when it mounts a volume, which bothers some people. Make it less chatty - print only important information by default. Get rid of 'dbg_msg()' macro completely. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: use pr_ helper instead of printkArtem Bityutskiy
Use 'pr_err()' instead of 'printk(KERN_ERR', etc. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: comply with coding styleArtem Bityutskiy
Join all the split printk lines in order to stop checkpatch complaining. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: erase free PEB with bitflip in EC headerMatthieu CASTET
Without this patch, these PEB are not scrubbed until we put data in them. Bitflip can accumulate latter and we can loose the EC header (but VID header should be intact and allow to recover data). Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: fix autoresize handling in R/O modeArtem Bityutskiy
Currently UBI fails in autoresize when it is in R/O mode (e.g., because the underlying MTD device is R/O). This patch fixes the issue - we just skip autoresize and print a warning. Reported-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: add max_beb_per1024 to attach ioctlRichard Genoud
This patch provides a possibility to set the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device using the UBI_IOCATT ioctl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: allow specifying bad PEBs limit using module parameterRichard Genoud
This patch provides the possibility to adjust the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device. The majority of NAND devices have their max_beb_per1024 equal to 20, but sometimes it's more. Now, we can adjust that via a kernel parameter: ubi.mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024]] Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: check max_beb_per1024 value in ubi_attach_mtd_devRichard Genoud
max_beb_per1024 shouldn't be negative, and a 0 value will be treated as the default value. For the upper bound, 768/1024 should be enough. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: prepare for max_beb_per1024 module parameter additionRichard Genoud
This patch prepare the way for the addition of max_beb_per1024 module parameter. There's no functional change. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: introduce MTD_PARAM_MAX_COUNTRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: separate bad_peb_limit in a functionRichard Genoud
No functional changes here, just to prepare for next patch. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04arm: sam9_l9260_defconfig: correct CONFIG_MTD_UBI_BEB_LIMITArtem Bityutskiy
UBI has changed the MTD_UBI_BEB_LIMIT semantics. It used to be a percent of total amount of eraseblock in the partition, and now it is the maximum amount of bad eraseblocks on the entire devise per 1024 eraseblocks. So not only the units changed, but also the meaning. Richard Genoud <richard.genoud@gmail.com> says: "I found the board: https://www.olimex.com/dev/sam9-L9260.html and the nand datasheet: http://www.rockbox.org/wiki/pub/Main/LyrePrototype/K9xxG08UXM.pdf page 11, we can see that the max_bad_bebper1024 is 25 (100 for 4096)" Thus, use "25" for sam9. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: use the whole MTD device size to get bad_peb_limitRichard Genoud
On NAND flash devices, UBI reserves some physical erase blocks (PEB) for bad block handling. Today, the number of reserved PEB can only be set as a percentage of the total number of PEB in each MTD partition. For example, for a NAND flash with 128KiB PEB, 2 MTD partition of 20MiB (mtd0) and 100MiB (mtd1) and 2% reserved PEB: - the UBI device on mtd0 will have 2 PEB reserved - the UBI device on mtd1 will have 16 PEB reserved The problem with this behaviour is that NAND flash manufacturers give a minimum number of valid block (NVB) during the endurance life of the device, e.g.: Parameter Symbol Min Max Unit Notes -------------------------------------------------------------- Valid block number NVB 1004 1024 Blocks 1 From this number we can deduce the maximum number of bad PEB that a device will contain during its endurance life: a 128MiB NAND flash (1024 PEB) will not have less than 20 bad blocks during the flash endurance life. But the manufacturer doesn't tell where those bad block will appear. He doesn't say either if they will be equally disposed on the whole device (and I'm pretty sure they won't). So, according to the datasheets, we should reserve the maximum number of bad PEB for each UBI device (worst case scenario: 20 bad blocks appears on the smallest MTD partition). So this patch make UBI use the whole MTD device size to calculate the maximum bad expected eraseblocks. The Kconfig option is in per1024 blocks, thus it can have a default value of 20 which is *very* common for NAND devices. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04mtd: mtdparts: introduce mtd_get_device_sizeRichard Genoud
'mtd_get_device_size()' returns the size of the whole MTD device, that is the mtd_info master size. This will be used by UBI to calculate the maximum number of bad blocks (MBB) on a MTD device. Artem: amended the patch a bit. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04mtd: mark mtd_is_partition argument as constantRichard Genoud
'struct mtd_info' is not modified by 'mtd_is_partition()' so it can be marked as "const". Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04arm: sam9_l9260_defconfig: remove non-existing config optionShmulik Ladkani
CONFIG_MTD_UBI_BEB_RESERVE has been removed and now we use CONFIG_MTD_UBI_BEB_LIMIT instead. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: kill CONFIG_MTD_UBI_BEB_RESERVEShmulik Ladkani
CONFIG_MTD_UBI_BEB_RESERVE and MIN_RESEVED_PEBS are no longer used, since the amount of reserved eraseblocks for bad PEB handling is now derived from 'ubi->bad_peb_limit' (ubi's maximum expected bad eraseblocks). Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04UBI: limit amount of reserved eraseblocks for bad PEB handlingShmulik Ladkani
The existing mechanism of reserving PEBs for bad PEB handling has two flaws: - It is calculated as a percentage of good PEBs instead of total PEBs. - There's no limit on the amount of PEBs UBI reserves for future bad eraseblock handling. This patch changes the mechanism to overcome these flaws. The desired level of PEBs reserved for bad PEB handling (beb_rsvd_level) is set to the maximum expected bad eraseblocks (bad_peb_limit) minus the existing number of bad eraseblocks (bad_peb_count). The actual amount of PEBs reserved for bad PEB handling is usually set to the desired level (but in some circumstances may be lower than the desired level, e.g. when attaching to a device that has too few available PEBs to satisfy the desired level). In the case where the device has too many bad PEBs (above the expected limit), then the desired level, and the actual amount of PEBs reserved are set to zero. No PEBs will be set aside for future bad eraseblock handling - even if some PEBs are made available (e.g. by shrinking a volume). If another PEB goes bad, and there are available PEBs, then the eraseblock will be marked bad (consuming one available PEB). But if there are no available PEBs, ubi will go into readonly mode. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
2012-09-04UBI: introduce new bad PEB limitShmulik Ladkani
Introduce 'ubi->bad_peb_limit', which specifies an upper limit of PEBs UBI expects to go bad. Currently, it is initialized to a fixed percentage of total PEBs in the UBI device (configurable via CONFIG_MTD_UBI_BEB_LIMIT). The 'bad_peb_limit' is intended to be used for calculating the amount of PEBs UBI needs to reserve for bad eraseblock handling. Artem: minor amendments. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04arm: sam9_l9260_defconfig: prepare to UBI config changeShmulik Ladkani
We are going to kill the CONFIG_MTD_UBI_BEB_RESERVE configuration option soon and use the CONFIG_MTD_UBI_BEB_LIMIT instead. In order to do this smoothly, we now introduce the new configuration option to sam9_l9260_defconfig, and will kill the old one after the corresponding UBI changes are done. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print PID in debug messagesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print image sequence number as unsigned integerArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-01Linux 3.6-rc4Linus Torvalds
2012-09-01time: Move ktime_t overflow checking into timespec_valid_strictJohn Stultz
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: Andreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-31Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
2012-08-31Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
2012-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
2012-08-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of scattered fixes ati/intel/nouveau, couple of core ones, nothing too shocking or different." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S gma500: Consider CRTC initially active. drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS drm/nvc0/copy: check PUNITS to determine which copy engines are disabled i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm: Check for invalid cursor flags drm: Initialize object type when using DRM_MODE() macro drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
2012-08-30s390/32: Don't clobber personality flags on execHeiko Carstens
In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-30drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222SPaul Menzel
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: Highlights: - fix a gart regression on older IGP chips - more MSAA fixes - fix a double free in gpu reset code - modesetting fixes - trinity dig encoder fix. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS
2012-08-30gma500: Consider CRTC initially active.Forest Bond
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-29drm/radeon: fix dig encoder selection on DCE61Alex Deucher
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I've split out the big send/receive update from my last pull request and now have just the fixes in my for-linus branch. The send/recv branch will wander over to linux-next shortly though. The largest patches in this pull are Josef's patches to fix DIO locking problems and his patch to fix a crash during balance. They are both well tested. The rest are smaller fixes that we've had queued. The last rc came out while I was hacking new and exciting ways to recover from a misplaced rm -rf on my dev box, so these missed rc3." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: fix that repair code is spuriously executed for transid failures Btrfs: fix ordered extent leak when failing to start a transaction Btrfs: fix a dio write regression Btrfs: fix deadlock with freeze and sync V2 Btrfs: revert checksum error statistic which can cause a BUG() Btrfs: remove superblock writing after fatal error Btrfs: allow delayed refs to be merged Btrfs: fix enospc problems when deleting a subvol Btrfs: fix wrong mtime and ctime when creating snapshots Btrfs: fix race in run_clustered_refs Btrfs: don't run __tree_mod_log_free_eb on leaves Btrfs: increase the size of the free space cache Btrfs: barrier before waitqueue_active Btrfs: fix deadlock in wait_for_more_refs btrfs: fix second lock in btrfs_delete_delayed_items() Btrfs: don't allocate a seperate csums array for direct reads Btrfs: do not strdup non existent strings Btrfs: do not use missing devices when showing devname Btrfs: fix that error value is changed by mistake Btrfs: lock extents as we map them in DIO ...
2012-08-29Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This will fix a warning for watchdog-test.c and it will remove a duplicate include of delay.h" * git://www.linux-watchdog.org/linux-watchdog: watchdog: da9052: Remove duplicate inclusion of delay.h watchdog: fix watchdog-test.c build warning
2012-08-29mm, slab: lock the correct nodelist after reenabling irqsDavid Rientjes
cache_grow() can reenable irqs so the cpu (and node) can change, so ensure that we take list_lock on the correct nodelist. This fixes an issue with commit 072bb0aa5e06 ("mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages") where list_lock for the wrong node was taken after growing the cache. Reported-and-tested-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-29drm/radeon: fix double free in radeon_gpu_resetChristian König
radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740Jerome Glisse
It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: rework panel mode setupAlex Deucher
Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon/atom: powergating fixes for DCE6Alex Deucher
Power gating is per crtc pair, but the powergating registers should be called individually. The hw handles power up/down properly. The pair is powered up if either crtc in the pair is powered up and the pair is not powered down until both crtcs in the pair are powered down. This simplifies programming and should save additional power as the previous code never actually power gated the crtc pair. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 12:42:51 +0000