summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-16IB/ipath: Enable 4KB MTUDave Olson
Enable use of 4KB MTU. Since the driver uses more pinned memory for receive buffers when the 4KB MTU is enabled, whether or not the fabric supports that MTU, add a "mtu4096" module parameter that can be used to limit the MTU to 2KB when it is known that 4KB MTUs can't be used anyway. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Shared context code needs to be sure device is usableDave Olson
The code was checking if units are present, but not that present units were usable (link up, etc.) Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Provide I/O bus speeds for diagnostic purposesArthur Jones
Modern I/O buses like PCIe and HT can be configured for multiple speeds and widths. When an ipath HCA seems to have lower than expected performance, it is very useful to be able to display what the driver thinks the bus speed is. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Make some constants chip-specific, related cleanupDave Olson
This patch makes some constants chip-specific, and makes some related changes to prepare for supporting another HCA. Signed-off-by: Dave Olson <dave.olson@qlogic.com Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Misc sparse warning cleanupArthur Jones
Recent sparse versions and kernel cleanups knock down the false positive rate of the ipath driver code to a point where having it be sparse clean is worthwhile. Here we fixup the sparse warnings. Some of these warnings (and the impetus to run sparse again) are due to work by Roland Dreier. Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Add IPoIB checksum offload supportEli Cohen
Arbel and Sinai devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Add IPoIB checksum offload supportEli Cohen
ConnectX devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Ali Ayub <ali@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IPoIB: Use checksum offload support if availableEli Cohen
For HCAs that support checksum offload (ie that set IB_DEVICE_UD_IP_CSUM in the device capabilities flags), have IPoIB set NETIF_F_IP_CSUM and use the HCA to generate and verify IP checksums. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB: Replace remaining __FUNCTION__ occurrences with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ instead. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ehca: Make symbols used only in a single source file staticRoland Dreier
Allow the compiler to optimize better and generate smaller code: add/remove: 0/6 grow/shrink: 2/0 up/down: 1528/-1864 (-336) function old new delta .ehca_set_pagebuf 1344 2172 +828 .ehca_probe 2312 3012 +700 ehca_set_pagebuf_phys 24 - -24 ehca_set_pagebuf_fmr 24 - -24 ehca_init_device 24 - -24 .ehca_set_pagebuf_fmr 480 - -480 .ehca_set_pagebuf_phys 512 - -512 .ehca_init_device 800 - -800 Also this fixes warnings like: drivers/infiniband/hw/ehca/ehca_mrmw.c:2015:5: warning: symbol 'ehca_set_pagebuf_fmr' was not declared. Should it be static? Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Make symbols used only in a single source file staticRoland Dreier
Avoid namespace pollution and allow the compiler to optimize better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Use proper format and cast to print dma_addr_tRoland Dreier
On some platforms, eg sparc64, dma_addr_t is not the same size as a pointer, so printing dma_addr_t values by casting to void * and using a %p format generates warnings. Fix this by casting to unsigned long and using %lx instead. This fixes the warnings: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_setup_virt_qp': drivers/infiniband/hw/nes/nes_verbs.c:1047: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_user_mr': drivers/infiniband/hw/nes/nes_verbs.c:2657: warning: cast to pointer from integer of different size Reported by Andrew Morton <akpm@linux-foundation.org>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Remove unused nes_netdev_exit() functionRoland Dreier
nes_netdev_exit() has no callers, so delete it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Remove redundant NULL check in nes_unregister_ofa_device()Roland Dreier
nes_unregister_ofa_device() dereferences the nesibdev pointer before testing if it's NULL. Also, the test is doubly redundant because the only caller of nes_unregister_ofa_device() is nes_destroy_ofa_device(), which already tests if nesibdev is NULL. Remove the unnecessary test. This was spotted by the Coverity checker (CID 2190). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/uverbs: Use alloc_file() instead of get_empty_filp()Roland Dreier
Christoph Hellwig wants to unexport get_empty_filp(), which is an ugly internal interface. Change the modular user in ib_uverbs_alloc_event_file() to use the better alloc_file() interface; this makes the code cleaner too. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/uverbs: Don't store struct file * for event filesRoland Dreier
The file member of struct ib_uverbs_event_file was only used to keep track of whether the file had been closed or not. The only thing we ever did with the value was check if it was NULL or not. Simplify the code and get rid of the need to keep track of the struct file * we allocate by replacing the file member with an is_closed member. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16mlx4_core: Fix confusion between mlx4_event and mlx4_dev_event enumsRoland Dreier
The struct mlx4_interface.event() method was supposed to get an enum mlx4_dev_event, but the driver code was actually passing in the hardware enum mlx4_event values. Fix up the callers of mlx4_dispatch_event() so that they pass in the right type of value, and fix up the event method in mlx4_ib so that it can handle the enum mlx4_dev_event values. This eliminates the need for the subtype parameter to the event method, so remove it. This also fixes the sparse warning drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types drivers/net/mlx4/intf.c:127:48: int enum mlx4_event versus drivers/net/mlx4/intf.c:127:48: int enum mlx4_dev_event Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/amso1100: Endian annotate mqsq allocatorRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/amso1100: Start of endianness annotationRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-04-16RDMA/nes: Delete unused variablesRoland Dreier
None of the cqp_reqs_XXX counters were ever used anywhere, and neither was the nics_per_function variable. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Trivial endianness annotationsRoland Dreier
Fix a couple of htonl() that should really be ntohl(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/ucma: Endian annotationRoland Dreier
Add __force cast of node_guid to __u64, since we are sticking it into a structure whose definition is shared with userspace. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/cm: Endianness annotationsRoland Dreier
Mostly update the RB tree comparisons to force __be types to normal integers, but the change to cm_format_sidr_req() is a real fix: param->path->pkey is already __be16. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Sean Hefty <sean.hefty@intel.com>
2008-04-16IB/mlx4: Endianness annotationsRoland Dreier
Trivial fixes to stamp_send_wqe(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Fix sparse warning about shadowed symbolRoland Dreier
Fix drivers/infiniband/hw/ipath/ipath_init_chip.c:526:10: warning: symbol 'val' shadows an earlier one drivers/infiniband/hw/ipath/ipath_init_chip.c:473:6: originally declared here by giving the second val a different name. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Arthur Jones <arthur.jones@qlogic.com>
2008-04-16IB/ipath: Fix sparse warning about pointer signednessArthur Jones
There's no reason for the third parameter of ipath_count_units() to be a u32 *, so change it to be an int * instead. This fixes the sparse warning: drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: warning: incorrect type in argument 3 (different signedness) drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: expected unsigned int [usertype] *maxportsp drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: got int *<noident> Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB: Make struct ib_uobject.id a signed intRoland Dreier
IDR IDs are signed, so struct ib_uobject.id should be signed. This avoids some sparse pointer signedness warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/cxgb3: IDR IDs are signedRoland Dreier
Fix sparse warnings about pointer signedness by using a signed int when calling idr_get_new_above(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-04-16RDMA/amso1100: Don't use 0UL as a NULL pointerRoland Dreier
Write tests for NULL pointers as if (!ptr) instead of if (ptr == 0UL) to fix sparse warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-04-16mlx4_core: Move opening brace of function onto a new lineRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Convert "if(foo)" to "if (foo)"Roland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Formatting cleanupsRoland Dreier
Fix a few whitespace and other coding style problems. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16Linux 2.6.25Linus Torvalds
2008-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it821x: do not describe noraid parameter with its value Pb1200/DBAu1200: fix bad IDE resource size Au1200: IDE driver build fix Au1200: kill IDE driver function prototypes avr32 mustn't select HAVE_IDE
2008-04-17it821x: do not describe noraid parameter with its valuePaul Bolle
Describe noraid parameter with its name (and not its value). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17Pb1200/DBAu1200: fix bad IDE resource sizeSergei Shtylyov
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17Au1200: IDE driver build fixSergei Shtylyov
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17Au1200: kill IDE driver function prototypesSergei Shtylyov
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17avr32 mustn't select HAVE_IDEAdrian Bunk
There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: update git url for blktrace io context: increment task attachment count in ioc_task_link()
2008-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: remove broken usb-serial num_endpoints check USB: option: Add new vendor ID and device ID for AMOI HSDPA modem USB: support more Huawei data card product IDs USB: option.c: add more device IDs USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
2008-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Add return value indication to tcp_prune_ofo_queue(). PS3: gelic: fix the oops on the broken IE returned from the hypervisor b43legacy: fix DMA mapping leakage mac80211: remove message on receiving unexpected unencrypted frames Update rt2x00 MAINTAINERS entry Add rfkill to MAINTAINERS file rfkill: Fix device type check when toggling states b43legacy: Fix usage of struct device used for DMAing ssb: Fix usage of struct device used for DMAing MAINTAINERS: move to generic repository for iwlwifi b43legacy: fix initvals loading on bcm4303 rtl8187: Add missing priv->vif assignments netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole [CAN]: Update documentation of struct sockaddr_can MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only [TCP]: Fix never pruned tcp out-of-order queue. [NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
2008-04-16AFS: Do not describe debug parameters with their valuePaul Bolle
Describe debug parameters with their names (and not their values). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15USB: remove broken usb-serial num_endpoints checkGreg Kroah-Hartman
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial code are just wrong, there are too many different devices out there with different numbers of endpoints. We need to just be sticking with the device ids instead of trying to catch this kind of thing. It broke too many different devices. This fixes a large number of usb-serial devices to get them working properly again. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: option: Add new vendor ID and device ID for AMOI HSDPA modemtang kai
This patch add new vendor ID and device ID for AMOI HSDPA modem. From: tang kai <tangk73@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: support more Huawei data card product IDsfangxiaozhi
- declare the unusal device for Huawei data card devices in unusual_devs.h - disable the product ID matching for Huawei data card devices in usb_match_device function of driver.c - declare the product IDs in option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: option.c: add more device IDsMatthias Urlichs
Add devices by AMOI and NovatelWireless. Signed-Off-By: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driverJames Cameron
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be made, and the expected data rate was achieved. Tested for an hour or two, total of 100Mb. I shall do more testing. Signed-off-by: James Cameron <quozl@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15[TCP]: Add return value indication to tcp_prune_ofo_queue().Vitaliy Gusev
Returns non-zero if tp->out_of_order_queue was seen non-empty. This allows tcp_try_rmem_schedule() to return early. Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15acpi: unneccessary to scan the PCI bus already scannedyakui.zhao@intel.com
http://bugzilla.kernel.org/show_bug.cgi?id=10124 this change: commit 08f1c192c3c32797068bfe97738babb3295bbf42 Author: Muli Ben-Yehuda <muli@il.ibm.com> Date: Sun Jul 22 00:23:39 2007 +0300 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. replaces pcibios_scan_root by pci_scan_bus_parented... but in pcibios_scan_root we have a check about scanned busses. Cc: <yakui.zhao@intel.com> Cc: Stian Jordet <stian@jordet.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 17:33:43 +0000