summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-25ipv6: don't disable interface if last ipv6 address is removedHannes Frederic Sowa
The reason behind this change is that as soon as we delete the last ipv6 address of an interface we also lose the /proc/sys/net/ipv6/conf/<interface> directory. This seems to be a usability problem for me. I don't see any reason why we should shutdown ipv6 on that interface in such cases. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: split duplicate address detection and router solicitation timerHannes Frederic Sowa
This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25mlx4: allow order-0 memory allocations in RX pathEric Dumazet
Signed-off-by: Eric Dumazet <edumazet@google.com> mlx4 exclusively uses order-2 allocations in RX path, which are likely to fail under memory pressure. We therefore drop frames more than needed. This patch tries order-3, order-2, order-1 and finally order-0 allocations to keep good performance, yet allow allocations if/when memory gets fragmented. By using larger pages, and avoiding unnecessary get_page()/put_page() on compound pages, this patch improves performance as well, lowering false sharing on struct page. Also use GFP_KERNEL allocations in initialization path, as allocating 12 MB (390 order-3 pages) can easily fail with GFP_ATOMIC. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Make EEH recovery work when using legacy interrupts, from Alexandre Rames. 2. Enable accelerated RFS for VLAN-tagged flows, from Andy Lutomirski. 3. Improve performance for non-TCP (and particularly UDP) traffic, which regressed in 3.10 when we switched to always allocating paged RX buffers. Partly by Jon Cooper. 4. Some minor bug fixes to IOMMU detection, timestamping capabilities, and IRQ cleanup on the probe failure path. I've dropped the RX skb cache, which improved some benchmarks but perhaps needs some reworking to be more generally useful. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25qeth: use default napi weightSebastian Ott
Since commit 82dc3c63c692b1e1d59378ecee948ac88e034aad "net: introduce NAPI_POLL_WEIGHT" network drivers receive a warning when they use napi weight higher than NAPI_POLL_WEIGHT. This patch reduces QETH_NAPI_WEIGHT from 128 to 64 (NAPI_POLL_WEIGHT). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25qeth: Fix crash on initial MTU size changeStefan Raspl
When the initial MTU size is changed prior to any activity on the device (e.g. by attaching a z/VM vNIC already configured in Linux to a guestLAN), we call dev_kfree_skb_irq(NULL) which results in a kernel panic. Adding a proper check for NULL pointers to address this issue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25qeth: change default standard blkt settings for OSAUrsula Braun
blkt settings (or LAN idle settings) for an OSA Express card determine when and how often an OSA Express card tells the operating system about new incoming packets. The semantic of these settings has changed starting with OSA Express3. Currently the qeth standard settings apply to OSA Express2 and older generations of OSA Express cards, while new generations of OSA Express cards require extra coding of their reasonable default. To cover future OSA Express generations the qeth default standard blkt setting is now the desired setting for OSA generations starting with OSA Express3, while the fixed set of older OSA Express cards receives its blkt settings explicitly. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25qeth: Increase default MTU for OSA devicesStefan Raspl
Increase the default MTU for real OSA devices in layer 2 mode to 1500 Bytes for increased compatibility. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25netiucv: remove unused macroAndy Shevchenko
If someone is interested to dump something they may consider to use print_hex_dump() or print_hex_dump_bytes() kernel helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25bnx2x: Remove sparse and coccinelle warningsYuval Mintz
This patch solves several sparse issues as well as an unneeded semicolon found via coccinelle. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25ipv6: add include file to suppress sparse warningsEric Dumazet
commit f88c91ddba95 ("ipv6: statically link register_inet6addr_notifier()" added following sparse warnings : net/ipv6/addrconf_core.c:83:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:89:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:95:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25tcp: remove invalid __rcu annotationEric Dumazet
struct tcp_fastopen_context has a field named tfm, which is a pointer to a crypto_cipher structure. It currently has a __rcu annotation, which is not needed at all. tcp_fastopen_ctx is the pointer fetched by rcu_dereference(), but once we have a pointer to current tcp_fastopen_context, we do not use/need rcu_dereference() to access tfm. This fixes a lot of sparse errors like the following : net/ipv4/tcp_fastopen.c:21:31: warning: incorrect type in argument 1 (different address spaces) net/ipv4/tcp_fastopen.c:21:31: expected struct crypto_cipher *tfm net/ipv4/tcp_fastopen.c:21:31: got struct crypto_cipher [noderef] <asn:4>*tfm Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24packet: nlmon: virtual netlink monitoring device for packet socketsDaniel Borkmann
Currently, there is no good possibility to debug netlink traffic that is being exchanged between kernel and user space. Therefore, this patch implements a netlink virtual device, so that netlink messages will be made visible to PF_PACKET sockets. Once there was an approach with a similar idea [1], but it got forgotten somehow. I think it makes most sense to accept the "overhead" of an extra netlink net device over implementing the same functionality from PF_PACKET sockets once again into netlink sockets. We have BPF filters that can already be easily applied which even have netlink extensions, we have RX_RING zero-copy between kernel- and user space that can be reused, and much more features. So instead of re-implementing all of this, we simply pass the skb to a given PF_PACKET socket for further analysis. Another nice benefit that comes from that is that no code needs to be changed in user space packet analyzers (maybe adding a dissector, but not more), thus out of the box, we can already capture pcap files of netlink traffic to debug/troubleshoot netlink problems. Also thanks goes to Thomas Graf, Flavio Leitner, Jesper Dangaard Brouer. [1] http://marc.info/?l=linux-netdev&m=113813401516110 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: netlink: virtual tap device managementDaniel Borkmann
Similarly to the networking receive path with ptype_all taps, we add the possibility to register netdevices that are for ARPHRD_NETLINK to the netlink subsystem, so that those can be used for netlink analyzers resp. debuggers. We do not offer a direct callback function as out-of-tree modules could do crap with it. Instead, a netdevice must be registered properly and only receives a clone, managed by the netlink layer. Symbols are exported as GPL-only. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: if_arp: add ARPHRD_NETLINK typeDaniel Borkmann
This small patch adds the definition of ARPHRD_NETLINK which can for example be used by netlink monitoring devices as device type. So that sockaddr_ll can pick it up and based on that choose the correct packet dissector. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: Restore unintentional reverts.David S. Miller
This restores commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c which initially accidently went into 'net', were reverted there, and then properly placed into 'net-next'. But the next net --> net-next merge accidently wiped them out again. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sfc: Improve test for IOMMU in useBen Hutchings
The device::iommu_group field may be set even if no IOMMU is in use. iommu_present() is still a better indicator, although it doesn't tell us whether *our* device is affected. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Fix IRQ cleanup in case of a probe failureBen Hutchings
The lifetime of an irq_cpu_rmap is odd: we have to allocate it before installing IRQ handlers and free it before removing the IRQ handlers. As a result of this asymmetry, it was omitted from some failure paths. On another failure path, we could try to remove IRQ handlers we had not yet installed. Move the irq_cpu_rmap allocation and freeing alongside IRQ handler installation and removal, in efx_nic_{init,fini}_interrupts(). Count the number of IRQ handlers successfully installed and only remove those on the failure path. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Do not pass non-TCP packets into GRO codeBen Hutchings
GRO can handle non-TCP packets and pass them up without coalescing, but it has to do some extra work to parse the packet which we can bypass using the hardware parse result. (This condition yields a false negative for TCP/IPv6 packets received by Falcon, but its performance is already poor in that case due to lack of checksum offload.) Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Define and set RX buffer flag for packets parsed as TCPBen Hutchings
This will be useful for shortcutting some software packet parsing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Enable accelerated RFS on vlansAndy Lutomirski
As far as I know, the hardware doesn't support matching on both IP fields and vlan tag, but it can at least match on the IP fields. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Report software timestamping capabilitiesBen Hutchings
The kernel can generate software receive timestamps and we should report those for all ports regardless of hardware capabilities. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Increase size of RX SKB header areaJon Cooper
This allows the SKB to hold the headers without reallocation more often. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Enable RX checksum offload for packets not handled by GROJon Cooper
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24sfc: Fix EEH with legacy interrupts.Alexandre Rames
PCI legacy interrupts are level-triggered, and we cannot mask them up on an isolated device. Instead, disable the IRQ at the controller until we have recovered. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-06-24bnx2x: Fix compilation with no IOV supportYuval Mintz
This fixes an issue caused by submit 78c3bcc5d1af64f51d9f30b0f5a2d1985bf69734 `bnx2x: Improve PF behaviour toward VF', which made the bnx2x driver fail compilation when PCI_IOV is not set. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: Unmap fragment page once iterator is doneWedson Almeida Filho
Callers of skb_seq_read() are currently forced to call skb_abort_seq_read() even when consuming all the data because the last call to skb_seq_read (the one that returns 0 to indicate the end) fails to unmap the last fragment page. With this patch callers will be allowed to traverse the SKB data by calling skb_prepare_seq_read() once and repeatedly calling skb_seq_read() as originally intended (and documented in the original commit 677e90eda), that is, only call skb_abort_seq_read() if the sequential read is actually aborted. Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== I would guess that this is the last big wireless pull request before the 3.11 merge window... Regarding the mac80211 bits, Johannes says: "I have a number of mesh fixes and improvements from Colleen, Jacob, Ashok and Thomas, powersave fixes in mac80211 from Alex, improved management-TX from Antonio, and a few various things, including locking fixes, from others and myself. Overall though, nothing really stands out." As for the iwlwifi bits, Johannes says: "Emmanuel contributed two AP mode fixes, removed an unused field, fixed a comment and added a warning for something that shouldn't happen in practice, and I removed the declaration of a function that doesn't even exist and cleaned up a small include." "This time I have a number of cleanups, a small fix from Emmanuel and two performance improvements that combined reduce our driver's CPU utilisation as much as 75% in high TX-throughput scenarios." "These two patches fix two issues with using rfkill randomly during traffic, which would then cause our driver to stop working and not be able to recover at all." Regarding the ath6kl bits, Kalle says: "Here are few simple patches for ath6kl. We have a suspend crash fix for USB from Shafi, use of mac_pton(), a compiler warning fix and a fix for module initialisation error path." Kalle also sends the biggest single item of note, the new ath10k driver for Qualcomm Atheros 802.11ac CQA98xx devices. Included is an NFC pull, of which Samuel says: "These are the pending NFC patches for the 3.11 merge window. It contains the pending fixes that were on nfc-fixes (nfc-fixes-3.10-2), along with a few more for the pn544 and pn533 drivers, the LLCP disconnection path and an LLCP memory leak. Highlights for this one are: - An initial secure element API. NFC chipsets can carry an embedded secure element or get access to the SIM one. In both cases they control the secure elements and this API provides a way to discover, enable and disable the available SEs. It also exports that to userspace in order for SE focused middleware to actually do something with them (e.g. payments). - NCI over SPI support. SPI is the most complex NCI specified transport layer and we now have support for it in the kernel. The next step will be to implement drivers for NCI chipsets using this transport like e.g. bcm2079x. - NFC p2p hardware simulation driver. We now have an nfcsim driver that is mostly a loopback device between 2 NFC interfaces. It also implements the rest of the NFC core API like polling and target detection. This driver, with neard running on top of it, allows us to completely test the LLCP, SNEP and Handover implementation without physical hardware. - A Firmware update netlink API. Most (All ?) HCI chipsets have a special firmware update mode where applications can push a new firmware that will be flashed. We now have a netlink API for providing that mode to e.g. nfctool." On top of all that, there are a variety of updates to brcmfmac, iwlegacy, rtlwifi, wil6210, and the TI wl12xx drivers. As usual, the bcma and ssb busses get a little love as well, as do a handful of others here and there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24xen-netback: double free on unloadDan Carpenter
There is a typo here, "i" vs "j", so we would crash on module_exit(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24ip_tunnel: Protect tunnel functions with CONFIG_INET guard.Jesse Gross
Tunnel constants can be used in generic code but in these cases the inline functions in ip_tunnels.h cause compilation problems if CONFIG_INET is not set. CC: Pravin Shelar <pshelar@nicira.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24openvswitch: Use correct config guard.Pravin B Shelar
This bug was introduced by commit aa310701e787087 (openvswitch: Add gre tunnel support.) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24bridge: fix a typo in commentsCong Wang
Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23net: allow large number of tx queuesEric Dumazet
netif_alloc_netdev_queues() uses kcalloc() to allocate memory for the "struct netdev_queue *_tx" array. For large number of tx queues, kcalloc() might fail, so this patch does a fallback to vzalloc(). As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT to kzalloc() flags to do this fallback only when really needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23Merge branch 'bnx2x'David S. Miller
Yuval Mintz says: ==================== This patch series mostly revolves around improving SR-IOV implementation (Better PF-VF relation, sanity checks and timings), as well as including a patch correcting the (outward) advertisement of 20G capabilities. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23bnx2x: Fix 20G KR2 support claimsYaniv Rosner
Don't claim 20G is supported if the speed is unsupported by the phys (reflected by various ethtools and ndos). Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23bnx2x: improve VF timingsAriel Elior
Wait 100ms for FLR to complete in parallel over all VFs instead of serializing the waits (which can amount to several seconds with 64 VFs). Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23bnx2x: VF ndo sanityAriel Elior
If iproute2 VF callbacks are invoked before PF is loaded, abort gracefully. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23bnx2x: Improve PF behaviour toward VFAriel Elior
If PF is unloaded with loaded VFs, signal towards VFs so they can detect this gracefully. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> ---- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 +++++++++++++++++++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 24 ++++++++++++++++++++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 12 +++++++++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h | 5 ++++- 7 files changed, 63 insertions(+), 8 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23VSOCK: Fix VSOCK_HASH and VSOCK_CONN_HASHAsias He
If we mod with VSOCK_HASH_SIZE -1, we get 0, 1, .... 249. Actually, we have vsock_bind_table[0 ... 250] and vsock_connected_table[0 .. 250]. In this case the last entry will never be used. We should mod with VSOCK_HASH_SIZE instead. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23VSOCK: Remove unnecessary labelAsias He
Signed-off-by: Asias He <asias@redhat.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23VSOCK: Return VMCI_ERROR_NO_MEM when fails to allocate skbAsias He
vmci_transport_recv_dgram_cb always return VMCI_SUCESS even if we fail to allocate skb, return VMCI_ERROR_NO_MEM instead. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23VSOCK: Introduce vsock_auto_bind helperAsias He
This peace of code is called three times, let's have a helper for it. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23ipv6: remove a useless pr_info() in addrconf_gre_config()Cong Wang
This is debug info, should at least be pr_debug(), but given that this code is in upstream for two years, there is no need to keep this debugging printk any more, so just remove it. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Update version to 5.2.44Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Add support for 83xx suspend and resume.Rajesh Borundia
o Implement shutdown and resume handlers for 83xx. o Refactor 82xx shutdown and resume handlers. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Add support for 'set driver version' in 83XXPratik Pujar
Issue 'set driver version' during driver load and after reset recovery to notify the driver version to the firmware. Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Cleanup of structure qlcnic_hardware_contextPratik Pujar
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Add support for PEX DMA method to read memory section of adapter dumpShahed Shaikh
This patch adds support to read memory section of adapter dump using PEX DMA method. This method significantly improves total adapter dump collection time. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Minimize sleep duration within loopback diagnostic test.Jitendra Kalsaria
o Minimize sleep duration and check for adapter status. o Exit from loopback test if adapter reset is detected. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Secondary unicast MAC address support.Jitendra Kalsaria
Add support for configuring secondary unicast address which will use existing HW filters to store all the unicast MAC addresses and prevent device going into promiscuous mode. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 10:35:30 +0000