summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-29V4L/DVB (9767): em28xx: improve board description messagesMauro Carvalho Chehab
Print manufacturer/product info from USB device and also card entry. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9766): em28xx: improve probe messagesMauro Carvalho Chehab
Prints usb speed used by em28xx interface. While there, fixes USB ID's endiannes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9765): em28xx: move tuner gpio's to the cards structMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9764): em28xx: Add support for suspend the device when not usedMauro Carvalho Chehab
Several chips may be turned off when the device is not used, like audio, video and dvb demods. This patch adds a gpio callback at the core structs to allow turning off such devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9763): em28xx: fix gpio settingsMauro Carvalho Chehab
A previous changeset moved gpio from em28xx struct into em28xx_board. However, the driver were not updated to properly honor those gpio's. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9762): em28xx: fix tuner absent entriesMauro Carvalho Chehab
Before this patch, several devices without tuner were kept the value 0 for tuner_type. However, this means TUNER_TEMIC_PAL. Replace those entries for the proper TUNER_ABSENT value. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9761): em28xx: replace magic numbers for mux aliasesMauro Carvalho Chehab
Instead of using magic vmux/amux, let's use an alias where possible. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9760): em28xx: move gpio lines into board table descriptionMauro Carvalho Chehab
Instead of a large, ugly switch specifying the gpio tables for each device, let's move it into the boards struct. This also helps to see what boards have already the gpio's for DVB. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9759): em28xx: move gpio tables to the top of em28xx-cardsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9758): em28xx: replace some magic by register descriptions where knownMauro Carvalho Chehab
Replaces all occurrences of em28xx_write_regs_req() and em28xx_write_reg() used to setup register names by em28xx_write_reg(). Also, documents the register names that are known. This patch were generated by this small perl script: my %reg_map = ( # Register table - the same as defined on parse_em28xx.pl script ); while (<>) { if (m/(.*)em28xx_write_regs_req\(dev\,\s*0x00\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) { my $reg = $2; my $val = $3; $val =~ tr/A-f/a-f/; $reg = $reg_map{$reg} if defined($reg_map{$reg}); printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val; } elsif (m/(.*)em28xx_write_regs\(dev\,\s*(.*)\,\s*\"\\x(..)\",\s*1\)\;(.*)/) { my $reg = $2; my $val = $3; $val =~ tr/A-f/a-f/; $reg = $reg_map{$reg} if defined($reg_map{$reg}); printf "$1em28xx_write_reg(dev, %s, 0x%s);$4\n", $reg, $val; } else { print $_; } } Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9755): em28xx: cleanup: We need just one tuner callbackMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9754): em28xx: improve debug messagesMauro Carvalho Chehab
Now, the first message states board names. Also, removed printing the alternate settings by default. I2C messages are now clearer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9753): em28xx: cleanup: saa7115 module auto-detects saa711x typeMauro Carvalho Chehab
Since saa7115 has saa711x chip auto-detection, there's no need on differenciating it at cards table. Just use the generic name for all boards that use a philips saa711x decoder. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9752): Remove duplicated fields on em28xx_board and em28xx structsMauro Carvalho Chehab
Several fields are duplicated on both structs. Let's just copy em28xx_board instead. A later cleanup could just copy the fields that are changed, in order to keep em28xx_board const. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9751): em28xx: card description cleanupsMauro Carvalho Chehab
Remove unused em28xx_board.vchannels and em28xx.video_channels. Also, .is_em2800 = 0 is not needed, as all data is zeroed by kernel loader. The table also included a notice that svideo weren't test on Hauppauge USB2. Remove this notice, since this input also works properly. Also, it does some whitespace cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9747): em28xx: Properly handles XCLK and I2C speedMauro Carvalho Chehab
The previous patches removed XCLK and I2C magic. Now, we finally know what those registers do. Also, only a very few cards need different setups for those. Instead of keeping the setups for those values inside the per-device hack magic switch, move the uncommon values to the board-specific struct, and have a common setup for all other boards. So, almost 100 lines of hacking magic were removed. A co-lateral effect of this patch is that it also fixes a bug at em28xx-core, where xclk were set, without taking any care about not overriding a previous xclk setup. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9745): em28xx: Cleanup GPIO/GPO setup codeDevin Heitmueller
Cleanup the calls to set the GPIOs and GPOs for various devices, replacing the register number with the #define from em28xx-reg.h and converting over to using em28xx_write_reg() Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9744): em28xx: cleanup XCLK register usageDevin Heitmueller
Convert over to setting the XCLK register usage with the new em28xx_write_reg() function. Thanks to Ray Lu from Empia for providing the em2860/2880 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9740): sms1xxx: add USB suspend and hibernation supportUri Shkolnik
This patch provides USB suspend and hibernation support for Siano's SMS chipset based USB device Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9739): sms1xxx: enable signal quality indicator LEDs on Hauppauge ↵Michael Krufky
WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9738): sms1xxx: fix invalid unc readingsMichael Krufky
Add function smsdvb_read_ucblocks to report uncorrectable error counts. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9736): sms1xxx: enable power LED on Hauppauge WinTV MiniStickMichael Krufky
Enable power LED while the frontend is in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9735): sms1xxx: turn off LEDs after initialization of Hauppauge ↵Michael Krufky
WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9733): sms1xxx: add autodetection support for Hauppauge WinTV MiniCardMichael Krufky
add USB IDs for Hauppauge WinTV MiniCard DVB-T Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9734): sms1xxx: add functions to configure and set gpioMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9717): em28xx: improve message probing logsMauro Carvalho Chehab
On some em28xx devices, there's an unused interface. This is printed on the logs as an error. We can just ignore that interface. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9713): gspca: Add the ov534 webcams in the gspca documentation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9712): gspca:Subdriver ov534 added.Antonio Ospite
The OmniVision OV534 is the USB bridge chip used in Sony Playstation EYE, it is found also in other webcams like Hercules Blog Webcam and Hercules Dualpix HD. This driver is the port to gspca of a prototype driver by Mark Ferrell based on vivi. The original code to initialize the camera and start the capture is from Jim Paris on ps2dev.org, here integrated with the analysis of the USB communications taken by the windows driver. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9711): gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead ↵Jean-Francois Moine
of sn9c102. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9709): gspca: Fix typos and name errors in Kconfig.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9708): gspca: Do the sn9c105 - ov7660 work again in sonixj.Jean-Francois Moine
The sn9c105 and sn9c120 bridges must be differently programmed for the ov7660. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9706): gspca: Use the ref counting of v4l2 for disconnection.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9703): Move the s5k4aa vflip quirk table to the main sensor file in ↵Erik Andrén
order to avoid compilation errors on older kernels Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9702): Move the ov9650 vflip table to avoid compilation warnings on ↵Erik Andrén
older kernels Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9701): Add a minor comment to the sensor initErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9698): Add another vflip quirk for the s5k4aaErik Andrén
The msi gx7xx range of computers seem to be a strange lot with lots of different sys vendor names and differently oriented sensors. This commit adds another quirk for a range of them. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9696): Remove accidental typoErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9694): Indent the m5602 register definitionsErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9693): Remove some unused definesErik Andrén
The gspca conversion deprecated a number of defines. Remove them. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9688): gspca: Reset the bulk URB status before resubmitting at irq ↵Jean-Francois Moine
level. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9687): gspca: Split brightness and red and blue balance in spca501.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9686): gspca: Don't return the control values from the webcams in ↵Hans de Goede
spca501. The bridge takes some time to update after a write, so apps doing a quick write/read can get the old value back. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9685): gspca: Correct restart of webcams in spca501.Hans de Goede
Currently the spca501 driver only works the first time used, then the cam needs to be unplugged or the driver reloaded, this is because currently the data which should be send each time the stream is started is send only once. Likewise currently the data to initialize the cam is send from the probe function, and thus will not get send after a suspend/resume. This patch fixes this by sending both at the right time. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9682): gspca: New subdriver parameter 'bulk_nurbs'.Antonio Ospite
Some webcams with image transfer by bulk messages accept one or many permanent bulk read. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9681): gspca: Rewrite the exchanges with the sensor ov7648 of sonixj.Jean-Francois Moine
The new exchanges are adapted from MS-win traces and the webcams work better. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9680): gspca: Let gspca handle the webcam 0c45:613a instead of sn9c102.Jean-Francois Moine
The driver sn9c102 has no code for the ov7648 sensor. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9678): af9015: Cleanup switch for usb IDHans Verkuil
It is much more readable to swap the byteorder in the switch rather than in each case statement. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing onesDirk Heer
This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9676): em28xx: fix a regression caused by ↵Mauro Carvalho Chehab
22c90ec6a5e07173ee670dc2ca75e0df0a7772c0 If removing and reiserting the driver on some devices, tuner type will be unset at the second time. This patch fixes this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9675): em28xx: devices with xc2028/3028 don't have tda9887Mauro Carvalho Chehab
This patch cleans up the entries of xc2028/3028, since those devices don't need or use a tda9887. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 19:25:18 +0000