summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-03ARM: imx: setup tctl register in device specific functionShawn Guo
It creates a gpt device speicific data structure and adds function hook gpt_setup_tctl in there to set up gpt TCTL register. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: initialize gpt device type for DT bootShawn Guo
Use different initialization function in CLOCKSOURCE_OF_DECLARE() to initialize gpt device type for DT boot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: define an enum for gpt timer device typeShawn Guo
Define an enum for gpt timer device type in include/soc/imx/timer.h to tell the gpt block differences among SoCs. Update non-DT users (clock drivers) to pass the device type. As we now have include/soc/imx/timer.h, the declaration of mxc_timer_init() is moved into there as the best fit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: move timer resources into a structureShawn Guo
Instead of passing around as individual argument, let's move timer resources like irq and clocks together with base address into a data structure, and pass pointer of the structure as argument to simplify the function call interface. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: use relaxed IO accessor in timer driverShawn Guo
Replace the __raw_readl/__raw_writel with readl_relaxed/writel_relaxed which is endian-safe, as a step of moving the driver code into folder drivers/clocksource. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: make imx51/3 suspend optionalArnd Bergmann
A recent change to the imx53 power management caused a build regression when CONFIG_SOC_IMX53 is disabled: mach-imx/built-in.o:(.init.rodata+0x60): undefined reference to `imx53_suspend' mach-imx/built-in.o:(.init.rodata+0x64): undefined reference to `imx53_suspend_sz' This avoids the problem by compiling the code in question conditionally on the presence of CONFIG_SOC_IMX53. For consistency, I'm also changing the same thing for CONFIG_SOC_IMX51. An additional benefit of this approach is reduced code size for kernels that only include support for one of the two SoCs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: clk-imx6q: refine sata's parentSébastien Szymanski
According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: clk-v610: Add clock for I2C2 and I2C3Mirza Krak
Add support for clock gating of I2C2 and I2C3. We use I2C2 in a (not yet mainlined) device tree. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAPJoe Perches
Use the generic mechanism to declare a bitmap instead of unsigned long. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: add imx7d clk tree supportFrank Li
Add i.MX7D clk tree support. Enable all clock to bring up imx7. Clock framework need be modified a little since imx7d change clock design. otherwise system will halt and block the other part upstream. All clock refine need wait for Dong Aisheng's patch clk: support clocks which requires parent clock on during operation Or other solution ready. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: clk: imx: update pllv3 to support imx7Frank Li
Add type IMX_PLLV3_ENET_IMX7 Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: clk-vf610: enable debug access port by defaultStefan Agner
Enabled DAP (debug access port) by default. This enables the hw- breakpoint framework to make use of the breakpoints and watchpoints supported by hardware. [ 0.215805] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.224624] hw-breakpoint: maximum watchpoint size is 4 bytes. Without this clock, the hw-breakpoint driver claims an undefined instruction during initialization: [ 0.227380] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 [ 0.227519] hw-breakpoint: CPU 0 failed to disable vector catch Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.Martin Fuzzey
In order to save power the DDR pins should be put into high impedance when in suspend to RAM. This requires manually requesting self refresh (rather than using the automatic mode implemented by the CCM / ESDCTL), followed by reconfiguring the IOMUXC. Of course the code to do this cannot itself run from DDR so the code is copied to and executed from internal memory. In my tests using a custom i.MX53 board with LPDDR2 RAM this reduced the suspend power consumption from 200mW to 60mW. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: add msl support for imx7dAnson Huang
Add i.MX7D MSL support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx7d: add low level debug uart supportAnson Huang
Add low level uart debug support for imx7d Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: mmdc: Include "common.h" header fileFabio Estevam
Include the "common.h" header file to fix the following sparse warning: arch/arm/mach-imx/mmdc.c:66:5: warning: symbol 'imx_mmdc_get_ddr_type' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03clk: imx: clk-cpu: Include "clk.h" header fileFabio Estevam
Include the "clk.h" header file to fix the following sparse warning: drivers/clk/imx/clk-cpu.c:77:12: warning: symbol 'imx_clk_cpu' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: Correct the comments in time.cShenwei Wang
The comments were corrected as the following to reflect the real situation of Freescale MXC timer IP block. There are totally 4 version of the timer on Freescale i.MX SoCs. Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: Remove the duplicated function declarationShenwei Wang
Removed the duplicated function declaration of mxc_timer_init which was already declared in drivers/clk/imx/clk.h. Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: Constify irq_domain_opsKrzysztof Kozlowski
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: using unsigned variable for do_divAnson Huang
The definition of do_div uses unsigned long long variable as its first parameter, better to pass a u64 variable as first parameter when calling do_div function. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlierShawn Guo
Commit 4631960d26da ("ARM: imx6: set initial power mode in pm function") moves imx6_set_lpm() from clock init function into imx6_pm_common_init(). This causes a hang when cpuidle support is enabled. The reason for that is ARM core clock is shut down unexpectedly by WAIT mode. It happens with the following call stack: cpuidle_register_governor() cpuidle_switch_governor() cpuidle_uninstall_idle_handler() synchronize_sched() wait_rcu_gp() wait_for_completion() When wait_for_completion() is called as above, all cores are idle/WFI. Hence, the reset value of CCM_CLPCR_LPM - WAIT mode, will trigger a hardware shutdown of the ARM core clock. To fix the regression, we need to ensure that CCM_CLPCR_LPM is initialized into RUN mode earlier than cpuidle governor registration, which is a postcore_initcall. This patch creates function imx6_pm_ccm_init() to map CCM block and initialize CCM_CLPCR_LPM into RUN mode, and have the function called from machine .init_irq hook, which should be early enough. Reported-by: Kevin Hilman <khilman@kernel.org> Fixes: 8fb76a07e2cb ("ARM: imx6: set initial power mode in pm function") Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: drop epit timer initialization from imx35 clock driverShawn Guo
EPIT provides another timer implementation besides the default GPT timer. The imx35 clock driver will use EPIT timer when option CONFIG_MXC_USE_EPIT is enabled. However, initializing timers from clock driver is a workaround solution and causes problem when we move clock drivers into driver/clk. Let's simply drop the EPIT initialization from there. If people really want this EPIT option, EPIT timer driver needs to be reworked to do the initialization in a standard way - use CLOCKSOURCE_OF_DECLARE() with device tree support. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03MAINTAINERS: add new folders into IMX entryShawn Guo
Add new created folders drivers/clk/imx/ and include/soc/imx/ into IMX entry. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: move clock drivers into drivers/clkShawn Guo
After the cleanup on clock drivers, they are now ready to be moved into drivers/clk. Let's move them into drivers/clk/imx folder. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-03ARM: imx: remove inclusions of platform headersShawn Guo
With the cleanup done before, we now can simply define base address and irq as needed in clock driver, to get those platform header inclusions removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: add clk-pllv1 type supportShawn Guo
Instead of calling cpu_is_xxx() in clk-pllv1 driver, let's add clk-pllv1 type support to handle the difference/quirk in particular SoC designs. Doing so will help get clk-pllv1 driver ready for being moved out of arch/arm/mach-imx folder. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: do not use cpu_is_xxx() in clock driverShawn Guo
As we're about to move clock drivers out of arch/arm/mach-imx, cpu_is_xxx() shouldn't be used any more. Let's avoid the call by looking at the device tree machine compatible string to determine which SoC the clock driver is running on. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: let pm code map CCM block on its ownShawn Guo
We are about to move imx6 clock driver into drivers/clk, so let's get imx6 pm code map CCM block on its own rather than relying on clock driver to do the mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx6: set initial power mode in pm functionShawn Guo
Rather than setting initial low-power mode in every single i.MX6 clock initialization function, we should really do that in pm code. Let's move imx6q_set_lpm(WAIT_CLOCKED) call into imx6_pm_common_init(). While at it, let's rename the function to imx6_set_lpm() since it's actually common for all i.MX6 SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx5: let pm code map CCM block on its ownShawn Guo
We are about to move imx5 clock driver into drivers/clk, so let's get imx5 pm code map CCM block on its own rather than relying on clock driver to do the mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: move revision definitions and declarations into a headerShawn Guo
The revision definitions and declarations are widely used by clock drivers. As a step of moving clock drivers out of arch/arm/mach-imx, let's create header include/soc/imx/revision.h to accommodate them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: use dynamic mapping for CCMShawn Guo
Replace the static mapping of CCM block in clock drivers with dynamic mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: use dynamic mapping for timerShawn Guo
Pass physical address of timer block to mxc_timer_init() call, which in turn does dynamic mapping within the function. Thus, we can avoid using static mapping in clock drivers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03dt-bindings: add imx7d clock ID definitionsFrank Li
It adds the imx7d clock ID definitions which will be used by both imx7d clock driver and device tree. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-04-26Linux 4.1-rc1Linus Torvalds
2015-04-26x86_64, asm: Work around AMD SYSRET SS descriptor attribute issueAndy Lutomirski
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefaaa44 x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull intel drm fixes from Dave Airlie. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
2015-04-26Merge git://git.infradead.org/intel-iommuLinus Torvalds
Pull intel iommu updates from David Woodhouse: "This lays a little of the groundwork for upcoming Shared Virtual Memory support — fixing some bogus #defines for capability bits and adding the new ones, and starting to use the new wider page tables where we can, in anticipation of actually filling in the new fields therein. It also allows graphics devices to be assigned to VM guests again. This got broken in 3.17 by disallowing assignment of RMRR-afflicted devices. Like USB, we do understand why there's an RMRR for graphics devices — and unlike USB, it's actually sane. So we can make an exception for graphics devices, just as we do USB controllers. Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty hack to allow broken BIOSes to forbid us from using X2APIC when they do stupid and invasive things and would break if we did. Someone noticed that since Windows doesn't have full IOMMU support for DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid initialising the IOMMU on the graphics unit altogether. This means that it would be available for use in "driver mode", where the IOMMU registers are made available through a BAR of the graphics device and the graphics driver can do SVM all for itself. So they started setting the X2APIC_OPT_OUT bit on *all* platforms with SVM capabilities. And even the platforms which *might*, if the planets had been aligned correctly, possibly have had SVM capability but which in practice actually don't" * git://git.infradead.org/intel-iommu: iommu/vt-d: support extended root and context entries iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification iommu/vt-d: Allow RMRR on graphics devices too iommu/vt-d: Print x2apic opt out info instead of printing a warning iommu/vt-d: kill bogus ecap_niotlb_iunits()
2015-04-26Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "This has a mixture of merge window cleanups and bugfixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: st: add include for pinctrl i2c: mux: use proper dev when removing "channel-X" symlinks i2c: digicolor: remove duplicate include i2c: Mark adapter devices with pm_runtime_no_callbacks i2c: pca-platform: fix broken email address i2c: mxs: fix broken email address i2c: rk3x: report number of messages transmitted
2015-04-26Merge branch 'for-linus-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Filipe hit two problems in my block group cache patches. We finalized the fixes last week and ran through more tests" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: prevent list corruption during free space cache processing Btrfs: fix inode cache writeout
2015-04-27Merge tag 'drm-intel-next-fixes-2015-04-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes three fixes for i915. * tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
2015-04-26Merge tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Another set of mainly bugfixes and a couple of cleanups. No new functionality in this round. Highlights include: Stable patches: - Fix a regression in /proc/self/mountstats - Fix the pNFS flexfiles O_DIRECT support - Fix high load average due to callback thread sleeping Bugfixes: - Various patches to fix the pNFS layoutcommit support - Do not cache pNFS deviceids unless server notifications are enabled - Fix a SUNRPC transport reconnection regression - make debugfs file creation failure non-fatal in SUNRPC - Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints - Fix locking around NFSv4.2 fallocate() support - Truncating NFSv4 file opens should also sync O_DIRECT writes - Prevent infinite loop in rpcrdma_ep_create() Features: - Various improvements to the RDMA transport code's handling of memory registration - Various code cleanups" * tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits) fs/nfs: fix new compiler warning about boolean in switch nfs: Remove unneeded casts in nfs NFS: Don't attempt to decode missing directory entries Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one" NFS: Rename idmap.c to nfs4idmap.c NFS: Move nfs_idmap.h into fs/nfs/ NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h NFS: Add a stub for GETDEVICELIST nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes nfs: fix DIO good bytes calculation nfs: Fetch MOUNTED_ON_FILEID when updating an inode sunrpc: make debugfs file creation failure non-fatal nfs: fix high load average due to callback thread sleeping NFS: Reduce time spent holding the i_mutex during fallocate() NFS: Don't zap caches on fallocate() xprtrdma: Make rpcrdma_{un}map_one() into inline functions xprtrdma: Handle non-SEND completions via a callout xprtrdma: Add "open" memreg op xprtrdma: Add "destroy MRs" memreg op xprtrdma: Add "reset MRs" memreg op ...
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26Merge tag 'pm+acpi-4.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "These are fixes mostly (intel_pstate, ACPI core, ACPI EC driver, cpupower tool), a new CPU ID for the Intel RAPL driver and one intel_pstate driver improvement that didn't make it to my previous pull requests due to timing. Specifics: - Fix a build warning in the intel_pstate driver showing up in non-SMP builds (Borislav Petkov) - Change one of the intel_pstate's P-state selection parameters for Baytrail and Cherrytrail CPUs to significantly improve performance at the cost of a small increase in energy consumption (Kristen Carlson Accardi) - Fix a NULL pointer dereference in the ACPI EC driver due to an unsafe list walk in the query handler removal routine (Chris Bainbridge) - Get rid of a false-positive lockdep warning in the ACPI container hot-remove code (Rafael J Wysocki) - Prevent the ACPI device enumeration code from creating device objects of a wrong type in some cases (Rafael J Wysocki) - Add Skylake processors support to the Intel RAPL power capping driver (Brian Bian) - Drop the stale MAINTAINERS entry for the ACPI dock driver that is regarded as part of the ACPI core and maintained along with it now (Chao Yu) - Fix cpupower tool breakage caused by a library API change in libpci 3.3.0 (Lucas Stach)" * tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Add a scan handler for PRP0001 ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline() ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler() MAINTAINERS: remove maintainship entry of docking station driver powercap / RAPL: Add support for Intel Skylake processors cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning intel_pstate: Change the setpoint for Atom params cpupower: fix breakage from libpci API change
2015-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This push fixes a build problem with img-hash under non-standard configurations and a serious regression with sha512_ssse3 which can lead to boot failures" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA crypto: x86/sha512_ssse3 - fixup for asm function prototype change
2015-04-26Merge tag 'platform-drivers-x86-v4.1-1' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "This series includes significant updates to the toshiba_acpi driver and the reintroduction of the dell-laptop keyboard backlight additions I had to revert previously. Also included are various fixes for typos, warnings, correctness, and minor bugs. Specifics: dell-laptop: - add support for keyboard backlight. toshiba_acpi: - adaptive keyboard, hotkey, USB sleep and charge, and backlight updates. Update sysfs documentation. toshiba_bluetooth: - fix enabling/disabling loop on recent devices apple-gmux: - lock iGP IO to protect from vgaarb changes other: - Fix typos, clear gcc warnings, clarify pr_* messages, correct return types, update MAINTAINERS" * tag 'platform-drivers-x86-v4.1-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (25 commits) toshiba_acpi: Do not register vendor backlight when acpi_video bl is available MAINTAINERS: Add me on list of Dell laptop drivers platform: x86: dell-laptop: Add support for keyboard backlight Documentation/ABI: Update sysfs-driver-toshiba_acpi entry toshiba_acpi: Fix pr_* messages from USB Sleep Functions toshiba_acpi: Update and fix USB Sleep and Charge modes wmi: Use bool function return values of true/false not 1/0 toshiba_bluetooth: Fix enabling/disabling loop on recent devices toshiba_bluetooth: Clean up *_add function and disable BT device at removal toshiba_bluetooth: Add three new functions to the driver toshiba_acpi: Fix the enabling of the Special Functions toshiba_acpi: Use the Hotkey Event Type function for keymap choosing toshiba_acpi: Add Hotkey Event Type function and definitions x86/wmi: delete unused wmi_data_lock mutex causing gcc warning apple-gmux: lock iGP IO to protect from vgaarb changes MAINTAINERS: Add missing Toshiba devices and add myself as maintainer toshiba_acpi: Update events in toshiba_acpi_notify intel-oaktrail: Fix trivial typo in comment thinkpad_acpi: off by one in adaptive_keyboard_hotkey_notify_hotkey() thinkpad_acpi: signedness bugs getting current_mode ...
2015-04-26Merge tag 'chrome-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson: "Here's a set of updates to the Chrome OS platform drivers for this merge window. Main new things this cycle is: - Driver changes to expose the lightbar to users. With this, you can make your own blinkenlights on Chromebook Pixels. - Changes in the way that the atmel_mxt trackpads are probed. The laptop driver is trying to be smart and not instantiate the devices that don't answer to probe. For the trackpad that can come up in two modes (bootloader or regular), this gets complicated since the driver already knows how to handle the two modes including the actual addresses used. So now the laptop driver needs to know more too, instantiating the regular address even if the bootloader one is the probe that passed. - mfd driver improvements by Javier Martines Canillas, and a few bugfixes from him, kbuild and myself" * tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: chromeos_laptop - instantiate Atmel at primary address platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST platform/chrome: cros_ec_lpc - Include linux/io.h header file platform/chrome: fix platform_no_drv_owner.cocci warnings platform/chrome: cros_ec_lightbar - fix duplicate const warning platform/chrome: cros_ec_dev - fix Unknown escape '%' warning platform/chrome: Expose Chrome OS Lightbar to users platform/chrome: Create sysfs attributes for the ChromeOS EC mfd: cros_ec: Instantiate ChromeOS EC character device platform/chrome: Add Chrome OS EC userspace device interface platform/chrome: Add cros_ec_lpc driver for x86 devices mfd: cros_ec: Add char dev and virtual dev pointers mfd: cros_ec: Use fixed size arrays to transfer data with the EC
2015-04-26Merge tag 'cris-for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull arch/cris updates from Jesper Nilsson: "Some much needed love for the CRIS-port. There's a bunch of changes this time, giving the CRISv32 port a bit of modern makeover with device-tree, irq domain and gpiolib support, and more switchover to generic frameworks. Some small fixes and removal of the theoretical SMP support brings up the rear" * tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: fix integer overflow in ELF_ET_DYN_BASE CRISv32: use GENERIC_SCHED_CLOCK CRISv32: use MMIO clocksource CRISv32: use generic clockevents CRIS: use generic headers via Kbuild CRIS: use generic cmpxchg.h CRIS: use generic atomic.h CRIS: use generic atomic bitops CRISv10: remove redundant macros from system.h CRIS: remove SMP code CRISv32: don't enable irqs in INIT_THREAD CRISv32: handle multiple signals CRISv32: prevent bogus restarts on sigreturn CRISv32: don't attempt syscall restart on irq exit Add binding documentation for CRIS CRIS: add Axis 88 board device tree CRISv32: add device tree support CRISv32: add irq domains support CRIS: enable GPIOLIB
2015-04-26Merge tag 'powerpc-4.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - fix for mm_dec_nr_pmds() from Scott. - fixes for oopses seen with KVM + THP from Aneesh. - build fixes from Aneesh & Shreyas. * tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/mm: Fix build error with CONFIG_PPC_TRANSACTIONAL_MEM disabled powerpc/kvm: Fix ppc64_defconfig + PPC_POWERNV=n build error powerpc/mm/thp: Return pte address if we find trans_splitting. powerpc/mm/thp: Make page table walk safe against thp split/collapse KVM: PPC: Remove page table walk helpers KVM: PPC: Use READ_ONCE when dereferencing pte_t pointer powerpc/hugetlb: Call mm_dec_nr_pmds() in hugetlb_free_pmd_range()
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 01:25:39 +0000