summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-17Revert "mm, slub: consider rest of partial list if acquire_slab() fails"Linus Torvalds
commit 9b1ea29bc0d7b94d420f96a0f4121403efc3dd85 upstream. This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf. The kernel test robot reports a huge performance regression due to the commit, and the reason seems fairly straightforward: when there is contention on the page list (which is what causes acquire_slab() to fail), we do _not_ want to just loop and try again, because that will transfer the contention to the 'n->list_lock' spinlock we hold, and just make things even worse. This is admittedly likely a problem only on big machines - the kernel test robot report comes from a 96-thread dual socket Intel Xeon Gold 6252 setup, but the regression there really is quite noticeable: -47.9% regression of stress-ng.rawpkt.ops_per_sec and the commit that was marked as being fixed (7ced37197196: "slub: Acquire_slab() avoid loop") actually did the loop exit early very intentionally (the hint being that "avoid loop" part of that commit message), exactly to avoid this issue. The correct thing to do may be to pick some kind of reasonable middle ground: instead of breaking out of the loop on the very first sign of contention, or trying over and over and over again, the right thing may be to re-try _once_, and then give up on the second failure (or pick your favorite value for "once"..). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/ Cc: Jann Horn <jannh@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17floppy: fix lock_fdc() signal handlingJiri Kosina
commit a0c80efe5956ccce9fe7ae5c78542578c07bc20a upstream. floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Wade Mealing <wmealing@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17cifs: return proper error code in statfs(2)Paulo Alcantara
commit 14302ee3301b3a77b331cc14efb95bf7184c73cc upstream. In cifs_statfs(), if server->ops->queryfs is not NULL, then we should use its return value rather than always returning 0. Instead, use rc variable as it is properly set to 0 in case there is no server->ops->queryfs. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17netfilter: x_tables: gpf inside xt_find_revision()Vasily Averin
commit 8e24edddad152b998b37a7f583175137ed2e04a5 upstream. nested target/match_revfn() calls work with xt[NFPROTO_UNSPEC] lists without taking xt[NFPROTO_UNSPEC].mutex. This can race with module unload and cause host to crash: general protection fault: 0000 [#1] Modules linked in: ... [last unloaded: xt_cluster] CPU: 0 PID: 542455 Comm: iptables RIP: 0010:[<ffffffff8ffbd518>] [<ffffffff8ffbd518>] strcmp+0x18/0x40 RDX: 0000000000000003 RSI: ffff9a5a5d9abe10 RDI: dead000000000111 R13: ffff9a5a5d9abe10 R14: ffff9a5a5d9abd8c R15: dead000000000100 (VvS: %R15 -- &xt_match, %RDI -- &xt_match.name, xt_cluster unregister match in xt[NFPROTO_UNSPEC].match list) Call Trace: [<ffffffff902ccf44>] match_revfn+0x54/0xc0 [<ffffffff902ccf9f>] match_revfn+0xaf/0xc0 [<ffffffff902cd01e>] xt_find_revision+0x6e/0xf0 [<ffffffffc05a5be0>] do_ipt_get_ctl+0x100/0x420 [ip_tables] [<ffffffff902cc6bf>] nf_getsockopt+0x4f/0x70 [<ffffffff902dd99e>] ip_getsockopt+0xde/0x100 [<ffffffff903039b5>] raw_getsockopt+0x25/0x50 [<ffffffff9026c5da>] sock_common_getsockopt+0x1a/0x20 [<ffffffff9026b89d>] SyS_getsockopt+0x7d/0xf0 [<ffffffff903cbf92>] system_call_fastpath+0x25/0x2a Fixes: 656caff20e1 ("netfilter 04/09: x_tables: fix match/target revision lookup") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17can: flexcan: enable RX FIFO after FRZ/HALT validJoakim Zhang
commit ec15e27cc8904605846a354bb1f808ea1432f853 upstream. RX FIFO enable failed could happen when do system reboot stress test: [ 0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator [ 0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.314640] flexcan 5a8d0000.can: registering netdev failed [ 0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator [ 0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.331360] flexcan 5a8e0000.can: registering netdev failed [ 0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator [ 0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.348117] flexcan 5a8f0000.can: registering netdev failed RX FIFO should be enabled after the FRZ/HALT are valid. But the current code enable RX FIFO and FRZ/HALT at the same time. Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-3-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17can: flexcan: assert FRZ bit in flexcan_chip_freeze()Joakim Zhang
commit 449052cfebf624b670faa040245d3feed770d22f upstream. Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although the reset value is 1b'1. This is a prepare patch, later patch will invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze mode acknowledge. Fixes: b1aa1c7a2165b ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze") Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17can: skb: can_skb_set_owner(): fix ref counting if socket was closed before ↵Oleksij Rempel
setting skb ownership commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream. There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, only set skb ownership to sockets which have still a ref count > 0. Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: Fix gro aggregation for udp encaps with zero csumDaniel Borkmann
commit 89e5c58fc1e2857ccdaae506fb8bc5fed57ee063 upstream. We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff4bd92 ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff4bd92 ("udp: additional GRO support") Fixes: 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream. When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17uapi: nfnetlink_cthelper.h: fix userspace compilation errorDmitry V. Levin
commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream. Apparently, <linux/netfilter/nfnetlink_cthelper.h> and <linux/netfilter/nfnetlink_acct.h> could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure") Cc: <stable@vger.kernel.org> # v3.6 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11Linux 4.4.261Greg Kroah-Hartman
Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210310132319.155338551@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controllerBjorn Helgaas
[ Upstream commit 059983790a4c963d92943e55a61fca55be427d55 ] Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 Link: https://lore.kernel.org/r/20201110220516.697934-1-helgaas@kernel.org Reported-by: John Smith <LK7S2ED64JHGLKj75shg9klejHWG49h5hk@protonmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-11platform/x86: acer-wmi: Add new force_caps module parameterHans de Goede
[ Upstream commit 39aa009bb66f9d5fbd1e58ca4aa03d6e6f2c9915 ] Add a new force_caps module parameter to allow overriding the drivers builtin capability detection mechanism. This can be used to for example: -Disable rfkill functionality on devices where there is an AA OEM DMI record advertising non functional rfkill switches -Force loading of the driver on devices with a missing AA OEM DMI record Note that force_caps is -1 when unset, this allows forcing the capability field to 0, which results in acer-wmi only providing WMI hotkey handling while disabling all other (led, rfkill, backlight) functionality. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-4-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-11dm table: fix iterate_devices based device capability checksJeffle Xu
commit a4c8dd9c2d0987cf542a2a0c42684c9c6d78a04e upstream. According to the definition of dm_iterate_devices_fn: * This function must iterate through each section of device used by the * target until it encounters a non-zero return code, which it then returns. * Returns zero if no callout returned non-zero. For some target type (e.g. dm-stripe), one call of iterate_devices() may iterate multiple underlying devices internally, in which case a non-zero return code returned by iterate_devices_callout_fn will stop the iteration in advance. No iterate_devices_callout_fn should return non-zero unless device iteration should stop. Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and elevate it for reuse to stop iterating (and return non-zero) on the first device that causes iterate_devices_callout_fn to return non-zero. Use dm_table_any_dev_attr() to properly iterate through devices. Rename device_is_nonrot() to device_is_rotational() and invert logic accordingly to fix improper disposition. [jeffle: backport notes] No stable writes. Also convert the no_sg_merge capability check, which is introduced by commit 200612ec33e5 ("dm table: propagate QUEUE_FLAG_NO_SG_MERGE"), and removed since commit 2705c93742e9 ("block: kill QUEUE_FLAG_NO_SG_MERGE") in v5.1. Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set") Fixes: 4693c9668fdc ("dm table: propagate non rotational flag") Cc: stable@vger.kernel.org Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11rsxx: Return -EFAULT if copy_to_user() failsDan Carpenter
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ] The copy_to_user() function returns the number of bytes remaining but we want to return -EFAULT to the user if it can't complete the copy. The "st" variable only holds zero on success or negative error codes on failure so the type should be int. Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-11ALSA: ctxfi: cthw20k2: fix mask on conf to allow 4 bitsColin Ian King
[ Upstream commit 26a9630c72ebac7c564db305a6aee54a8edde70e ] Currently the mask operation on variable conf is just 3 bits so the switch statement case value of 8 is unreachable dead code. The function daio_mgr_dao_init can be passed a 4 bit value, function dao_rsc_init calls it with conf set to: conf = (desc->msr & 0x7) | (desc->passthru << 3); so clearly when desc->passthru is set to 1 then conf can be at least 8. Fix this by changing the mask to 0xf. Fixes: 8cc72361481f ("ALSA: SB X-Fi driver merge") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210227001527.1077484-1-colin.king@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-11futex: fix spin_lock() / spin_unlock_irq() imbalanceThomas Schoebel-Theuer
This patch and problem analysis is specific for 4.4 LTS, due to incomplete backporting of other fixes. Later LTS series have different backports. The following is obviously incorrect: static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this, struct futex_hash_bucket *hb) { [...] raw_spin_lock(&pi_state->pi_mutex.wait_lock); [...] raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); [...] } The 4.4-specific fix should probably go in the direction of b4abf91047c, making everything irq-safe. Probably, backporting of b4abf91047c to 4.4 LTS could thus be another good idea. However, this might involve some more 4.4-specific work and require thorough testing: > git log --oneline v4.4..b4abf91047c -- kernel/futex.c kernel/locking/rtmutex.c | wc -l 10 So this patch is just an obvious quickfix for now. Hint: the lock order is documented in 4.9.y and later. A similar documenting is missing in 4.4.y. Please somebody either backport also, or write a new description, if there would be some differences I cannot easily see at the moment. Without reliable docs, inspection of the locking correctness may become a pain. Signed-off-by: Thomas Schoebel-Theuer <tst@1und1.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Fixes: 394fc4981426 ("futex: Rework inconsistent rt_mutex/futex_q state") Fixes: 6510e4a2d04f ("futex,rt_mutex: Provide futex specific rt_mutex API") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11futex: fix irq self-deadlock and satisfy assertionThomas Schoebel-Theuer
This patch and problem analysis is specific for 4.4 LTS, due to incomplete backporting of other fixes. Later LTS series have different backports. Since v4.4.257 when CONFIG_PROVE_LOCKING=y the following triggers right after reboot of our pre-life systems which equal our production setup: Mar 03 11:27:33 icpu-test-bap10 kernel: ================================= Mar 03 11:27:33 icpu-test-bap10 kernel: [ INFO: inconsistent lock state ] Mar 03 11:27:33 icpu-test-bap10 kernel: 4.4.259-rc1-grsec+ #730 Not tainted Mar 03 11:27:33 icpu-test-bap10 kernel: --------------------------------- Mar 03 11:27:33 icpu-test-bap10 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Mar 03 11:27:33 icpu-test-bap10 kernel: apache2-ssl/9310 [HC0[0]:SC0[0]:HE1:SE1] takes: Mar 03 11:27:33 icpu-test-bap10 kernel: (&p->pi_lock){?.-.-.}, at: [<ffffffff810abb68>] pi_state_update_owner+0x51/0xd7 Mar 03 11:27:33 icpu-test-bap10 kernel: {IN-HARDIRQ-W} state was registered at: Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81088c4a>] __lock_acquire+0x3a7/0xe4a Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81089b01>] lock_acquire+0x18d/0x1bc Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff8170151c>] _raw_spin_lock_irqsave+0x3e/0x50 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810719a5>] try_to_wake_up+0x2c/0x210 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81071bf3>] default_wake_function+0xd/0xf Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81083588>] autoremove_wake_function+0x11/0x35 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810830b2>] __wake_up_common+0x48/0x7c Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff8108311a>] __wake_up+0x34/0x46 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff814c2a23>] megasas_complete_int_cmd+0x31/0x33 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff814c60a0>] megasas_complete_cmd+0x570/0x57b Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff814d05bc>] complete_cmd_fusion+0x23e/0x33d Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff814d0768>] megasas_isr_fusion+0x67/0x74 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81091ae5>] handle_irq_event_percpu+0x134/0x311 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81091cf5>] handle_irq_event+0x33/0x51 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810948b9>] handle_edge_irq+0xa3/0xc2 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81005f7b>] handle_irq+0xf9/0x101 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81005700>] do_IRQ+0x80/0xf5 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81702228>] ret_from_intr+0x0/0x20 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff8100cab0>] arch_cpu_idle+0xa/0xc Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81083a5a>] default_idle_call+0x1e/0x20 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81083b9d>] cpu_startup_entry+0x141/0x22f Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff816fb853>] rest_init+0x135/0x13b Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81d5ce99>] start_kernel+0x3fa/0x40a Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81d5c2af>] x86_64_start_reservations+0x2a/0x2c Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81d5c3d0>] x86_64_start_kernel+0x11f/0x12c Mar 03 11:27:33 icpu-test-bap10 kernel: irq event stamp: 1457 Mar 03 11:27:33 icpu-test-bap10 kernel: hardirqs last enabled at (1457): [<ffffffff81042a69>] get_user_pages_fast+0xeb/0x14f Mar 03 11:27:33 icpu-test-bap10 kernel: hardirqs last disabled at (1456): [<ffffffff810429dd>] get_user_pages_fast+0x5f/0x14f Mar 03 11:27:33 icpu-test-bap10 kernel: softirqs last enabled at (1446): [<ffffffff815e127d>] release_sock+0x142/0x14d Mar 03 11:27:33 icpu-test-bap10 kernel: softirqs last disabled at (1444): [<ffffffff815e116f>] release_sock+0x34/0x14d Mar 03 11:27:33 icpu-test-bap10 kernel: other info that might help us debug this: Mar 03 11:27:33 icpu-test-bap10 kernel: Possible unsafe locking scenario: Mar 03 11:27:33 icpu-test-bap10 kernel: CPU0 Mar 03 11:27:33 icpu-test-bap10 kernel: ---- Mar 03 11:27:33 icpu-test-bap10 kernel: lock(&p->pi_lock); Mar 03 11:27:33 icpu-test-bap10 kernel: <Interrupt> Mar 03 11:27:33 icpu-test-bap10 kernel: lock(&p->pi_lock); Mar 03 11:27:33 icpu-test-bap10 kernel: *** DEADLOCK *** Mar 03 11:27:33 icpu-test-bap10 kernel: 2 locks held by apache2-ssl/9310: Mar 03 11:27:33 icpu-test-bap10 kernel: #0: (&(&(__futex_data.queues)[i].lock)->rlock){+.+...}, at: [<ffffffff810ae4e6>] do Mar 03 11:27:33 icpu-test-bap10 kernel: #1: (&lock->wait_lock){+.+...}, at: [<ffffffff810ae53a>] do_futex+0x639/0x809 Mar 03 11:27:33 icpu-test-bap10 kernel: stack backtrace: Mar 03 11:27:33 icpu-test-bap10 kernel: CPU: 13 PID: 9310 UID: 99 Comm: apache2-ssl Not tainted 4.4.259-rc1-grsec+ #730 Mar 03 11:27:33 icpu-test-bap10 kernel: Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.11.0 11/02/2019 Mar 03 11:27:33 icpu-test-bap10 kernel: 0000000000000000 ffff883fb79bfc00 ffffffff816f8fc2 ffff883ffa66d300 Mar 03 11:27:33 icpu-test-bap10 kernel: ffffffff8eaa71f0 ffff883fb79bfc50 ffffffff81088484 0000000000000000 Mar 03 11:27:33 icpu-test-bap10 kernel: 0000000000000001 0000000000000001 0000000000000002 ffff883ffa66db58 Mar 03 11:27:33 icpu-test-bap10 kernel: Call Trace: Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff816f8fc2>] dump_stack+0x94/0xca Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81088484>] print_usage_bug+0x1bc/0x1d1 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81087d76>] ? check_usage_forwards+0x98/0x98 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810885a5>] mark_lock+0x10c/0x203 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81088cb9>] __lock_acquire+0x416/0xe4a Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810abb68>] ? pi_state_update_owner+0x51/0xd7 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81089b01>] lock_acquire+0x18d/0x1bc Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81089b01>] ? lock_acquire+0x18d/0x1bc Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810abb68>] ? pi_state_update_owner+0x51/0xd7 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81700d12>] _raw_spin_lock+0x2a/0x39 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810abb68>] ? pi_state_update_owner+0x51/0xd7 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810abb68>] pi_state_update_owner+0x51/0xd7 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810ae5af>] do_futex+0x6ae/0x809 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff810ae83d>] SyS_futex+0x133/0x143 Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff8100158a>] ? syscall_trace_enter_phase2+0x1a2/0x1bb Mar 03 11:27:33 icpu-test-bap10 kernel: [<ffffffff81701848>] tracesys_phase2+0x90/0x95 Bisecting detects 47e452fcf2f in the above specific scenario using apache-ssl, but apparently the missing *_irq() was introduced in 34c8e1c2c02. However, just reverting the old _irq() variants to a similar status than before 34c8e1c2c02, or using _irqsave() / _irqrestore() as some other backports are doing in various places, would not really help. The fundamental problem is the following violation of the assertion lockdep_assert_held(&pi_state->pi_mutex.wait_lock) in pi_state_update_owner(): Mar 03 12:50:03 icpu-test-bap10 kernel: ------------[ cut here ]------------ Mar 03 12:50:03 icpu-test-bap10 kernel: WARNING: CPU: 37 PID: 8488 at kernel/futex.c:844 pi_state_update_owner+0x3d/0xd7() Mar 03 12:50:03 icpu-test-bap10 kernel: Modules linked in: xt_time xt_connlimit xt_connmark xt_NFLOG xt_limit xt_hashlimit veth ip_set_bitmap_port xt_DSCP xt_multiport ip_set_hash_ip xt_owner xt_set ip_set_hash_net xt_state xt_conntrack nf_conntrack_ftp mars lz4_decompress lz4_compress ipmi_devintf x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul hed ipmi_si ipmi_msghandler processor crc32c_intel ehci_pci ehci_hcd usbcore i40e usb_common Mar 03 12:50:03 icpu-test-bap10 kernel: CPU: 37 PID: 8488 UID: 99 Comm: apache2-ssl Not tainted 4.4.259-rc1-grsec+ #737 Mar 03 12:50:03 icpu-test-bap10 kernel: Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.11.0 11/02/2019 Mar 03 12:50:03 icpu-test-bap10 kernel: 0000000000000000 ffff883f863f7c70 ffffffff816f9002 0000000000000000 Mar 03 12:50:03 icpu-test-bap10 kernel: 0000000000000009 ffff883f863f7ca8 ffffffff8104cda2 ffffffff810abac7 Mar 03 12:50:03 icpu-test-bap10 kernel: ffff883ffbfe5e80 0000000000000000 ffff883f82ed4bc0 00007fc01c9bf000 Mar 03 12:50:03 icpu-test-bap10 kernel: Call Trace: Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff816f9002>] dump_stack+0x94/0xca Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff8104cda2>] warn_slowpath_common+0x94/0xad Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810abac7>] ? pi_state_update_owner+0x3d/0xd7 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff8104ce5f>] warn_slowpath_null+0x15/0x17 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810abac7>] pi_state_update_owner+0x3d/0xd7 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810abea8>] free_pi_state+0x2d/0x73 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810abf0b>] unqueue_me_pi+0x1d/0x31 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810ad735>] futex_lock_pi+0x27a/0x2e8 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff81088bca>] ? __lock_acquire+0x327/0xe4a Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810ae6a9>] do_futex+0x784/0x809 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810cfa9a>] ? seccomp_phase1+0xde/0x1e7 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810a4503>] ? current_kernel_time64+0xb/0x31 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810d23c3>] ? current_kernel_time+0xb/0xf Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff810ae861>] SyS_futex+0x133/0x143 Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff8100158a>] ? syscall_trace_enter_phase2+0x1a2/0x1bb Mar 03 12:50:03 icpu-test-bap10 kernel: [<ffffffff81701888>] tracesys_phase2+0x90/0x95 Mar 03 12:50:03 icpu-test-bap10 kernel: ---[ end trace 968f95a458dea951 ]--- In order to both (1) prevent the self-deadlock, and (2) to satisfy the assertion at pi_state_update_owner(), some locking with irq disable is needed, at least in the specific call stack. Interestingly, there existed a suchalike locking just before f08a4af5ccb. This is just a quick hotfix, resurrecting some previous locks at the old places, but now using ->wait_lock in place of the previous ->pi_lock (which was in place before f08a4af5ccb). The ->pi_lock is now also taken, by the new code which had been introduced in 34c8e1c2c02. When this patch is applied, both the above splats are no longer triggering at my prelife machines. Without this patch, I cannot ensure stable production at 1&1 Ionos. Hint for further work: I have not yet tested other call paths, since I am under time pressure for security reasons. Hint for further hardening of 4.4.y and probably some more LTS series: Probably some more systematic testing with CONFIG_PROVE_LOCKING (and probably some more options) should be invested in order to make the 4.4 LTS series really "stable" again. Signed-off-by: Thomas Schoebel-Theuer <tst@1und1.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Fixes: f08a4af5ccb2 ("futex: Use pi_state_update_owner() in put_pi_state()") Fixes: 34c8e1c2c025 ("futex: Provide and use pi_state_update_owner()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07Linux 4.4.260Greg Kroah-Hartman
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210305120849.381261651@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07media: v4l: ioctl: Fix memory leak in video_usercopySakari Ailus
commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream. When an IOCTL with argument size larger than 128 that also used array arguments were handled, two memory allocations were made but alas, only the latter one of them was released. This happened because there was only a single local variable to hold such a temporary allocation. Fix this by adding separate variables to hold the pointers to the temporary allocations. Reported-by: Arnd Bergmann <arnd@kernel.org> Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07swap: fix swapfile read/write offsetJens Axboe
commit caf6912f3f4af7232340d500a4a2008f81b93f14 upstream. We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... [This issue only affects swapfiles on filesystems on top of blockdevs that implement rw_page ops (brd, zram, btt, pmem), and not on top of any other block devices, in contrast to the upstream commit fix.] Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()") Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07zsmalloc: account the number of compacted pages correctlyRokudo Yan
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream. There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram<id>/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan <wu-yan@tcl.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07xen-netback: respect gnttab_map_refs()'s return valueJan Beulich
commit 2991397d23ec597405b116d96de3813420bdcbc3 upstream. Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07Xen/gnttab: handle p2m update errors on a per-slot basisJan Beulich
commit 8310b77b48c5558c140e7a57a702e7819e62f04e upstream. Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Verify lengths on passthrough PDUsChris Leech
commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream. Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZEChris Leech
commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs outputJoe Perches
commit 2efc459d06f1630001e3984854848a5647086232 upstream. Output defects can exist in sysfs content using sprintf and snprintf. sprintf does not know the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content and it's possible to overrun the PAGE_SIZE buffer length. Add a generic sysfs_emit function that knows that the size of the temporary buffer and ensures that no overrun is done. Add a generic sysfs_emit_at function that can be used in multiple call situations that also ensures that no overrun is done. Validate the output buffer argument to be page aligned. Validate the offset len argument to be within the PAGE_SIZE buf. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/884235202216d464d61ee975f7465332c86f76b2.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Restrict sessions and handles to admin capabilitiesLee Duncan
commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream. Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07media: uvcvideo: Allow entities with no padsRicardo Ribalda
[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ] Avoid an underflow while calculating the number of inputs for entities with zero pads. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07staging: most: sound: add sanity check for function argumentChristian Gromm
[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ] This patch checks the function parameter 'bytes' before doing the subtraction to prevent memory corruption. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_dataGopal Tiwari
[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ] kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07x86/build: Treat R_386_PLT32 relocation as R_386_PC32Fangrui Song
[ Upstream commit bb73d07148c405c293e576b40af37737faf23a6a ] This is similar to commit b21ebf2fb4cd ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32") but for i386. As far as the kernel is concerned, R_386_PLT32 can be treated the same as R_386_PC32. R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which can only be used by branches. If the referenced symbol is defined externally, a PLT will be used. R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be used by address taking operations and branches. If the referenced symbol is defined externally, a copy relocation/canonical PLT entry will be created in the executable. On x86-64, there is no PIC vs non-PIC PLT distinction and an R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and `call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler. This avoids canonical PLT entries (st_shndx=0, st_value!=0). On i386, there are 2 types of PLTs, PIC and non-PIC. Currently, the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries are possible ABI issues but GCC/GNU as will likely keep the status quo because (1) the ABI is legacy (2) the change will drop a GNU ld diagnostic for non-default visibility ifunc in shared objects. clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler generated function declarations, because preventing canonical PLT entries is weighed over the rare ifunc diagnostic. Further info for the more interested: https://github.com/ClangBuiltLinux/linux/issues/1210 https://sourceware.org/bugzilla/show_bug.cgi?id=27169 https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6 [1] [ bp: Massage commit message. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()Di Zhu
[ Upstream commit 275b1e88cabb34dbcbe99756b67e9939d34a99b6 ] pktgen create threads for all online cpus and bond these threads to relevant cpu repecivtily. when this thread firstly be woken up, it will compare cpu currently running with the cpu specified at the time of creation and if the two cpus are not equal, BUG_ON() will take effect causing panic on the system. Notice that these threads could be migrated to other cpus before start running because of the cpu hotplug after these threads have created. so the BUG_ON() used here seems unreasonable and we can replace it with WARN_ON() to just printf a warning other than panic the system. Signed-off-by: Di Zhu <zhudi21@huawei.com> Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07wlcore: Fix command execute failure 19 for wl12xxTony Lindgren
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ] We can currently get a "command execute failure 19" error on beacon loss if the signal is weak: wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211]) Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done. This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with. As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required"). If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used. With this fix wlcore reconnects properly after a beacon loss. Cc: Raz Bouganim <r-bouganim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07vt/consolemap: do font sum unsignedJiri Slaby
[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ] The constant 20 makes the font sum computation signed which can lead to sign extensions and signed wraps. It's not much of a problem as we build with -fno-strict-overflow. But if we ever decide not to, be ready, so switch the constant to unsigned. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirkHeiner Kallweit
[ Upstream commit 4b2d8ca9208be636b30e924b1cbcb267b0740c93 ] On this system the M.2 PCIe WiFi card isn't detected after reboot, only after cold boot. reboot=pci fixes this behavior. In [0] the same issue is described, although on another system and with another Intel WiFi card. In case it's relevant, both systems have Celeron CPUs. Add a PCI reboot quirk on affected systems until a more generic fix is available. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202399 [ bp: Massage commit message. ] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07staging: fwserial: Fix error handling in fwserial_createDinghao Liu
[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ] When fw_core_add_address_handler() fails, we need to destroy the port by tty_port_destroy(). Also we need to unregister the address handler by fw_core_remove_address_handler() on failure. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07mm/hugetlb.c: fix unnecessary address expansion of pmd sharingLi Xinhai
commit a1ba9da8f0f9a37d900ff7eff66482cf7de8015e upstream. The current code would unnecessarily expand the address range. Consider one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) = (1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M) without expand. But the current result will be (1G-4M, 3G+4M). Actually, the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd sharing. After this patch, we will check that the vma span at least one PUD aligned size and the start,end range overlap the aligned range of vma. With above example, the aligned vma range is (1G, 3G), so if (start, end) range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to both start and end. Otherwise, we will have chance to adjust start downwards or end upwards without exceeding (vm_start, vm_end). Mike: : The 'adjusted range' is used for calls to mmu notifiers and cache(tlb) : flushing. Since the current code unnecessarily expands the range in some : cases, more entries than necessary would be flushed. This would/could : result in performance degradation. However, this is highly dependent on : the user runtime. Is there a combination of vma layout and calls to : actually hit this issue? If the issue is hit, will those entries : unnecessarily flushed be used again and need to be unnecessarily reloaded? Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07net: fix up truesize of cloned skb in skb_prepare_for_shift()Marco Elver
commit 097b9146c0e26aabaa6ff3e5ea536a53f5254a79 upstream. Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when cloning an skb, save and restore truesize after pskb_expand_head(). This can occur if the allocator decides to service an allocation of the same size differently (e.g. use a different size class, or pass the allocation on to KFENCE). Because truesize is used for bookkeeping (such as sk_wmem_queued), a modified truesize of a cloned skb may result in corrupt bookkeeping and relevant warnings (such as in sk_stream_kill_queues()). Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07xfs: Fix assert failure in xfs_setattr_size()Yumei Huang
commit 88a9e03beef22cc5fabea344f54b9a0dfe63de08 upstream. An assert failure is triggered by syzkaller test due to ATTR_KILL_PRIV is not cleared before xfs_setattr_size. As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size, just remove it from the assert. Signed-off-by: Yumei Huang <yuhuang@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07JFS: more checks for invalid superblockRandy Dunlap
commit 3bef198f1b17d1bb89260bad947ef084c0a2d1a6 upstream. syzbot is feeding invalid superblock data to JFS for mount testing. JFS does not check several of the fields -- just assumes that they are good since the JFS_MAGIC and version fields are good. In this case (syzbot reproducer), we have s_l2bsize == 0xda0c, pad == 0xf045, and s_state == 0x50, all of which are invalid IMO. Having s_l2bsize == 0xda0c causes this UBSAN warning: UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25 shift exponent -9716 is negative s_l2bsize can be tested for correctness. pad can be tested for non-0 and punted. s_state can be tested for its valid values and punted. Do those 3 tests and if any of them fails, report the superblock as invalid/corrupt and let fsck handle it. With this patch, chkSuper() says this when JFS_DEBUG is enabled: jfs_mount: Mount Failure: superblock is corrupt! Mount JFS Failure: -22 jfs_mount failed w/return code = -22 The obvious problem with this method is that next week there could be another syzbot test that uses different fields for invalid values, this making this like a game of whack-a-mole. syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193 Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com Reported-by: kernel test robot <lkp@intel.com> # v2 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: jfs-discussion@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07hugetlb: fix update_and_free_page contig page struct assumptionMike Kravetz
commit dbfee5aee7e54f83d96ceb8e3e80717fac62ad63 upstream. page structs are not guaranteed to be contiguous for gigantic pages. The routine update_and_free_page can encounter a gigantic page, yet it assumes page structs are contiguous when setting page flags in subpages. If update_and_free_page encounters non-contiguous page structs, we can see “BUG: Bad page state in process …” errors. Non-contiguous page structs are generally not an issue. However, they can exist with a specific kernel configuration and hotplug operations. For example: Configure the kernel with CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where the gigantic page will be allocated. Zi Yan outlined steps to reproduce here [1]. [1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/ Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") Signed-off-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
2021-03-07scripts: set proper OpenSSL include dir also for sign-fileRolf Eike Beer
commit fe968c41ac4f4ec9ffe3c4cf16b72285f5e9674f upstream. Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto") Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scripts: use pkg-config to locate libcryptoRolf Eike Beer
commit 2cea4a7a1885bd0c765089afc14f7ff0eb77864e upstream. Otherwise build fails if the headers are not in the default location. While at it also ask pkg-config for the libs, with fallback to the existing value. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07mmc: sdhci-esdhc-imx: fix kernel panic when remove moduleFrank Li
commit a56f44138a2c57047f1ea94ea121af31c595132b upstream. In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some circumstances, this may be done while the device is runtime suspended, triggering the below splat. Fix the problem by adding a pm_runtime_get_sync(), before reading the register, which will turn on clocks etc making the device accessible again. [ 1811.323148] mmc1: card aaaa removed [ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core] [ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5 [ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT) [ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.391090] lr : platform_drv_remove+0x2c/0x50 [ 1811.395536] sp : ffff800012c7bcb0 [ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900 [ 1811.404181] x27: 0000000000000000 x26: 0000000000000000 [ 1811.409497] x25: 0000000000000000 x24: 0000000000000000 [ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120 [ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810 [ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020 [ 1811.430773] x17: 0000000000000000 x16: 0000000000000000 [ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10 [ 1811.441406] x13: 0000000000000000 x12: 0000000000000020 [ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f [ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080 [ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000 [ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000 [ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030 [ 1811.478624] Call trace: [ 1811.481081] sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.487098] platform_drv_remove+0x2c/0x50 [ 1811.491198] __device_release_driver+0x188/0x230 [ 1811.495818] driver_detach+0xc0/0x14c [ 1811.499487] bus_remove_driver+0x5c/0xb0 [ 1811.503413] driver_unregister+0x30/0x60 [ 1811.507341] platform_driver_unregister+0x14/0x20 [ 1811.512048] sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx] [ 1811.518495] __arm64_sys_delete_module+0x19c/0x230 [ 1811.523291] el0_svc_common.constprop.0+0x78/0x1a0 [ 1811.528086] do_el0_svc+0x24/0x90 [ 1811.531405] el0_svc+0x14/0x20 [ 1811.534461] el0_sync_handler+0x1a4/0x1b0 [ 1811.538474] el0_sync+0x174/0x180 [ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000) [ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]--- Signed-off-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [iwamatsu: adjust context] Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07iwlwifi: pcie: fix to correct null checkNobuhiro Iwamatsu
The fixes made in commit: 4ae5798004d8 ("iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap") is not enough in 4.4.y tree.. This still have problems with null references. This provides the correct fix. Also, this is a problem only in 4.4.y. This patch has been applied to other LTS trees, but with the correct fixes. Fixes: 4ae5798004d8 ("iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap") Cc: stable@vger.kernel.org Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07net: usb: qmi_wwan: support ZTE P685M modemLech Perczak
commit 88eee9b7b42e69fb622ddb3ff6f37e8e4347f5b2 upstream. Now that interface 3 in "option" driver is no longer mapped, add device ID matching it to qmi_wwan. The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20210223183456.6377-1-lech.perczak@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07futex: Ensure the correct return value from futex_lock_pi()Thomas Gleixner
commit 12bb3f7f1b03d5913b3f9d4236a488aa7774dfe9 upstream. In case that futex_lock_pi() was aborted by a signal or a timeout and the task returned without acquiring the rtmutex, but is the designated owner of the futex due to a concurrent futex_unlock_pi() fixup_owner() is invoked to establish consistent state. In that case it invokes fixup_pi_state_owner() which in turn tries to acquire the rtmutex again. If that succeeds then it does not propagate this success to fixup_owner() and futex_lock_pi() returns -EINTR or -ETIMEOUT despite having the futex locked. Return success from fixup_pi_state_owner() in all cases where the current task owns the rtmutex and therefore the futex and propagate it correctly through fixup_owner(). Fixup the other callsite which does not expect a positive return value. Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> [Sharan: Backported patch for kernel 4.4.y. Also folded in is a part of the cleanup patch d7c5ed73b19c("futex: Remove needless goto's")] Signed-off-by: Sharan Turlapati <sturlapati@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03Linux 4.4.259Greg Kroah-Hartman
Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210301161006.881950696@linuxfoundation.org Link: https://lore.kernel.org/r/20210302192525.276142994@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 01:35:06 +0000